wl12xx: add wl12xx_cmd_role_start_ibss()

Add wl12xx_cmd_role_start_ibss() implementation and defintion.
This function is used in order to start the IBSS role.

Stopping the IBSS is done by using the same api as stop STA,
so there is no need for a separate function.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

1 files changed, 62 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/cmd.c b/drivers/net/wireless/wl12xx/cmd.c
index 261807b45ab..d8c39168104 100644
--- a/drivers/net/wireless/wl12xx/cmd.c
+++ b/drivers/net/wireless/wl12xx/cmd.c
@@ -617,6 +617,7 @@ out:
 	return ret;
 }
 
+/* use this function to stop ibss as well */
 int wl12xx_cmd_role_stop_sta(struct wl1271 *wl)
 {
 	struct wl12xx_cmd_role_stop *cmd;
@@ -770,6 +771,67 @@ out:
 	return ret;
 }
 
+int wl12xx_cmd_role_start_ibss(struct wl1271 *wl)
+{
+	struct wl12xx_cmd_role_start *cmd;
+	struct ieee80211_bss_conf *bss_conf = &wl->vif->bss_conf;
+	int ret;
+
+	cmd = kzalloc(sizeof(*cmd), GFP_KERNEL);
+	if (!cmd) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	wl1271_debug(DEBUG_CMD, "cmd role start ibss %d", wl->role_id);
+
+	cmd->role_id = wl->role_id;
+	if (wl->band == IEEE80211_BAND_5GHZ)
+		cmd->band = WL12XX_BAND_5GHZ;
+	cmd->channel = wl->channel;
+	cmd->ibss.basic_rate_set = cpu_to_le32(wl->basic_rate_set);
+	cmd->ibss.beacon_interval = cpu_to_le16(wl->beacon_int);
+	cmd->ibss.dtim_interval = bss_conf->dtim_period;
+	cmd->ibss.ssid_type = WL12XX_SSID_TYPE_ANY;
+	cmd->ibss.ssid_len = wl->ssid_len;
+	memcpy(cmd->ibss.ssid, wl->ssid, wl->ssid_len);
+	memcpy(cmd->ibss.bssid, wl->bssid, ETH_ALEN);
+	cmd->sta.local_rates = cpu_to_le32(wl->rate_set);
+
+	if (wl->sta_hlid == WL12XX_INVALID_LINK_ID) {
+		ret = wl12xx_allocate_link(wl, &wl->sta_hlid);
+		if (ret)
+			goto out_free;
+	}
+	cmd->ibss.hlid = wl->sta_hlid;
+	cmd->ibss.remote_rates = cpu_to_le32(wl->rate_set);
+
+	wl1271_debug(DEBUG_CMD, "role start: roleid=%d, hlid=%d, session=%d "
+		     "basic_rate_set: 0x%x, remote_rates: 0x%x",
+		     wl->role_id, cmd->sta.hlid, cmd->sta.session,
+		     wl->basic_rate_set, wl->rate_set);
+
+	wl1271_debug(DEBUG_CMD, "wl->bssid = %pM", wl->bssid);
+
+	ret = wl1271_cmd_send(wl, CMD_ROLE_START, cmd, sizeof(*cmd), 0);
+	if (ret < 0) {
+		wl1271_error("failed to initiate cmd role enable");
+		goto err_hlid;
+	}
+
+	goto out_free;
+
+err_hlid:
+	/* clear links on error. */
+	wl12xx_free_link(wl, &wl->sta_hlid);
+
+out_free:
+	kfree(cmd);
+
+out:
+	return ret;
+}
+
 
 /**
  * send test command to firmware