diff options
author | David S. Miller <davem@davemloft.net> | 2010-11-29 11:19:09 -0800 |
---|---|---|
committer | David S. Miller <davem@davemloft.net> | 2010-11-29 11:19:09 -0800 |
commit | 77148625e10d0fda50d05e92d199c0df17b66e9a (patch) | |
tree | fdb5bb1e06933dc8891a3c4d3c93c371801d8b37 /drivers/net/wireless/wl12xx/conf.h | |
parent | a41778694806ac1ccd4b1dafed1abef8d5ba98ac (diff) | |
parent | 51cce8a590c4696d62bfacc63378d1036084cef7 (diff) |
Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
Diffstat (limited to 'drivers/net/wireless/wl12xx/conf.h')
-rw-r--r-- | drivers/net/wireless/wl12xx/conf.h | 1105 |
1 files changed, 1105 insertions, 0 deletions
diff --git a/drivers/net/wireless/wl12xx/conf.h b/drivers/net/wireless/wl12xx/conf.h new file mode 100644 index 00000000000..a16b3616e43 --- /dev/null +++ b/drivers/net/wireless/wl12xx/conf.h @@ -0,0 +1,1105 @@ +/* + * This file is part of wl1271 + * + * Copyright (C) 2009 Nokia Corporation + * + * Contact: Luciano Coelho <luciano.coelho@nokia.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef __CONF_H__ +#define __CONF_H__ + +enum { + CONF_HW_BIT_RATE_1MBPS = BIT(0), + CONF_HW_BIT_RATE_2MBPS = BIT(1), + CONF_HW_BIT_RATE_5_5MBPS = BIT(2), + CONF_HW_BIT_RATE_6MBPS = BIT(3), + CONF_HW_BIT_RATE_9MBPS = BIT(4), + CONF_HW_BIT_RATE_11MBPS = BIT(5), + CONF_HW_BIT_RATE_12MBPS = BIT(6), + CONF_HW_BIT_RATE_18MBPS = BIT(7), + CONF_HW_BIT_RATE_22MBPS = BIT(8), + CONF_HW_BIT_RATE_24MBPS = BIT(9), + CONF_HW_BIT_RATE_36MBPS = BIT(10), + CONF_HW_BIT_RATE_48MBPS = BIT(11), + CONF_HW_BIT_RATE_54MBPS = BIT(12), + CONF_HW_BIT_RATE_MCS_0 = BIT(13), + CONF_HW_BIT_RATE_MCS_1 = BIT(14), + CONF_HW_BIT_RATE_MCS_2 = BIT(15), + CONF_HW_BIT_RATE_MCS_3 = BIT(16), + CONF_HW_BIT_RATE_MCS_4 = BIT(17), + CONF_HW_BIT_RATE_MCS_5 = BIT(18), + CONF_HW_BIT_RATE_MCS_6 = BIT(19), + CONF_HW_BIT_RATE_MCS_7 = BIT(20) +}; + +enum { + CONF_HW_RATE_INDEX_1MBPS = 0, + CONF_HW_RATE_INDEX_2MBPS = 1, + CONF_HW_RATE_INDEX_5_5MBPS = 2, + CONF_HW_RATE_INDEX_6MBPS = 3, + CONF_HW_RATE_INDEX_9MBPS = 4, + CONF_HW_RATE_INDEX_11MBPS = 5, + CONF_HW_RATE_INDEX_12MBPS = 6, + CONF_HW_RATE_INDEX_18MBPS = 7, + CONF_HW_RATE_INDEX_22MBPS = 8, + CONF_HW_RATE_INDEX_24MBPS = 9, + CONF_HW_RATE_INDEX_36MBPS = 10, + CONF_HW_RATE_INDEX_48MBPS = 11, + CONF_HW_RATE_INDEX_54MBPS = 12, + CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, +}; + +enum { + CONF_HW_RXTX_RATE_MCS7 = 0, + CONF_HW_RXTX_RATE_MCS6, + CONF_HW_RXTX_RATE_MCS5, + CONF_HW_RXTX_RATE_MCS4, + CONF_HW_RXTX_RATE_MCS3, + CONF_HW_RXTX_RATE_MCS2, + CONF_HW_RXTX_RATE_MCS1, + CONF_HW_RXTX_RATE_MCS0, + CONF_HW_RXTX_RATE_54, + CONF_HW_RXTX_RATE_48, + CONF_HW_RXTX_RATE_36, + CONF_HW_RXTX_RATE_24, + CONF_HW_RXTX_RATE_22, + CONF_HW_RXTX_RATE_18, + CONF_HW_RXTX_RATE_12, + CONF_HW_RXTX_RATE_11, + CONF_HW_RXTX_RATE_9, + CONF_HW_RXTX_RATE_6, + CONF_HW_RXTX_RATE_5_5, + CONF_HW_RXTX_RATE_2, + CONF_HW_RXTX_RATE_1, + CONF_HW_RXTX_RATE_MAX, + CONF_HW_RXTX_RATE_UNSUPPORTED = 0xff +}; + +enum { + CONF_SG_DISABLE = 0, + CONF_SG_PROTECTIVE, + CONF_SG_OPPORTUNISTIC +}; + +enum { + /* + * PER threshold in PPM of the BT voice + * + * Range: 0 - 10000000 + */ + CONF_SG_BT_PER_THRESHOLD = 0, + + /* + * Number of consequent RX_ACTIVE activities to override BT voice + * frames to ensure WLAN connection + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_OVERRIDE, + + /* + * Defines the PER threshold of the BT voice + * + * Range: 0 - 65000 + */ + CONF_SG_BT_NFS_SAMPLE_INTERVAL, + + /* + * Defines the load ratio of BT + * + * Range: 0 - 100 (%) + */ + CONF_SG_BT_LOAD_RATIO, + + /* + * Defines whether the SG will force WLAN host to enter/exit PSM + * + * Range: 1 - SG can force, 0 - host handles PSM + */ + CONF_SG_AUTO_PS_MODE, + + /* + * Compensation percentage of probe requests when scan initiated + * during BT voice/ACL link. + * + * Range: 0 - 255 (%) + */ + CONF_SG_AUTO_SCAN_PROBE_REQ, + + /* + * Compensation percentage of probe requests when active scan initiated + * during BT voice + * + * Range: 0 - 255 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Defines antenna configuration (single/dual antenna) + * + * Range: 0 - single antenna, 1 - dual antenna + */ + CONF_SG_ANTENNA_CONFIGURATION, + + /* + * The threshold (percent) of max consequtive beacon misses before + * increasing priority of beacon reception. + * + * Range: 0 - 100 (%) + */ + CONF_SG_BEACON_MISS_PERCENT, + + /* + * The rate threshold below which receiving a data frame from the AP + * will increase the priority of the data frame above BT traffic. + * + * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 + */ + CONF_SG_RATE_ADAPT_THRESH, + + /* + * Not used currently. + * + * Range: 0 + */ + CONF_SG_RATE_ADAPT_SNR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, + + /* + * RX guard time before the beginning of a new BT voice frame during + * which no new WLAN trigger frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + CONF_SG_RXT, + + /* + * TX guard time before the beginning of a new BT voice frame during + * which no new WLAN frame is transmitted. + * + * Range: 0 - 100000 (us) + */ + + CONF_SG_TXT, + + /* + * Enable adaptive RXT/TXT algorithm. If disabled, the host values + * will be utilized. + * + * Range: 0 - disable, 1 - enable + */ + CONF_SG_ADAPTIVE_RXT_TXT, + + /* + * The used WLAN legacy service period during active BT ACL link + * + * Range: 0 - 255 (ms) + */ + CONF_SG_PS_POLL_TIMEOUT, + + /* + * The used WLAN UPSD service period during active BT ACL link + * + * Range: 0 - 255 (ms) + */ + CONF_SG_UPSD_TIMEOUT, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT voice + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, + + /* + * Fixed time ensured for BT traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, + + /* + * Fixed time ensured for WLAN traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, + + /* + * Number of consequent BT voice frames not interrupted by WLAN + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_SERVED, + + /* + * Protection time of the DHCP procedure. + * + * Range: 0 - 100000 (ms) + */ + CONF_SG_DHCP_TIME, + + /* + * Compensation percentage of WLAN active scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, + CONF_SG_TEMP_PARAM_1, + CONF_SG_TEMP_PARAM_2, + CONF_SG_TEMP_PARAM_3, + CONF_SG_TEMP_PARAM_4, + CONF_SG_TEMP_PARAM_5, + CONF_SG_PARAMS_MAX, + CONF_SG_PARAMS_ALL = 0xff +}; + +struct conf_sg_settings { + u32 params[CONF_SG_PARAMS_MAX]; + u8 state; +}; + +enum conf_rx_queue_type { + CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */ + CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */ +}; + +struct conf_rx_settings { + /* + * The maximum amount of time, in TU, before the + * firmware discards the MSDU. + * + * Range: 0 - 0xFFFFFFFF + */ + u32 rx_msdu_life_time; + + /* + * Packet detection threshold in the PHY. + * + * FIXME: details unknown. + */ + u32 packet_detection_threshold; + + /* + * The longest time the STA will wait to receive traffic from the AP + * after a PS-poll has been transmitted. + * + * Range: 0 - 200000 + */ + u16 ps_poll_timeout; + /* + * The longest time the STA will wait to receive traffic from the AP + * after a frame has been sent from an UPSD enabled queue. + * + * Range: 0 - 200000 + */ + u16 upsd_timeout; + + /* + * The number of octets in an MPDU, below which an RTS/CTS + * handshake is not performed. + * + * Range: 0 - 4096 + */ + u16 rts_threshold; + + /* + * The RX Clear Channel Assessment threshold in the PHY + * (the energy threshold). + * + * Range: ENABLE_ENERGY_D == 0x140A + * DISABLE_ENERGY_D == 0xFFEF + */ + u16 rx_cca_threshold; + + /* + * Occupied Rx mem-blocks number which requires interrupting the host + * (0 = no buffering, 0xffff = disabled). + * + * Range: u16 + */ + u16 irq_blk_threshold; + + /* + * Rx packets number which requires interrupting the host + * (0 = no buffering). + * + * Range: u16 + */ + u16 irq_pkt_threshold; + + /* + * Max time in msec the FW may delay RX-Complete interrupt. + * + * Range: 1 - 100 + */ + u16 irq_timeout; + + /* + * The RX queue type. + * + * Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY, + */ + u8 queue_type; +}; + +#define CONF_TX_MAX_RATE_CLASSES 8 + +#define CONF_TX_RATE_MASK_UNSPECIFIED 0 +#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \ + CONF_HW_BIT_RATE_2MBPS) +#define CONF_TX_RATE_RETRY_LIMIT 10 + +struct conf_tx_rate_class { + + /* + * The rates enabled for this rate class. + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 enabled_rates; + + /* + * The dot11 short retry limit used for TX retries. + * + * Range: u8 + */ + u8 short_retry_limit; + + /* + * The dot11 long retry limit used for TX retries. + * + * Range: u8 + */ + u8 long_retry_limit; + + /* + * Flags controlling the attributes of TX transmission. + * + * Range: bit 0: Truncate - when set, FW attempts to send a frame stop + * when the total valid per-rate attempts have + * been exhausted; otherwise transmissions + * will continue at the lowest available rate + * until the appropriate one of the + * short_retry_limit, long_retry_limit, + * dot11_max_transmit_msdu_life_time, or + * max_tx_life_time, is exhausted. + * 1: Preamble Override - indicates if the preamble type + * should be used in TX. + * 2: Preamble Type - the type of the preamble to be used by + * the policy (0 - long preamble, 1 - short preamble. + */ + u8 aflags; +}; + +#define CONF_TX_MAX_AC_COUNT 4 + +/* Slot number setting to start transmission at PIFS interval */ +#define CONF_TX_AIFS_PIFS 1 +/* Slot number setting to start transmission at DIFS interval normal + * DCF access */ +#define CONF_TX_AIFS_DIFS 2 + + +enum conf_tx_ac { + CONF_TX_AC_BE = 0, /* best effort / legacy */ + CONF_TX_AC_BK = 1, /* background */ + CONF_TX_AC_VI = 2, /* video */ + CONF_TX_AC_VO = 3, /* voice */ + CONF_TX_AC_CTS2SELF = 4, /* fictious AC, follows AC_VO */ + CONF_TX_AC_ANY_TID = 0x1f +}; + +struct conf_tx_ac_category { + /* + * The AC class identifier. + * + * Range: enum conf_tx_ac + */ + u8 ac; + + /* + * The contention window minimum size (in slots) for the access + * class. + * + * Range: u8 + */ + u8 cw_min; + + /* + * The contention window maximum size (in slots) for the access + * class. + * + * Range: u8 + */ + u16 cw_max; + + /* + * The AIF value (in slots) for the access class. + * + * Range: u8 + */ + u8 aifsn; + + /* + * The TX Op Limit (in microseconds) for the access class. + * + * Range: u16 + */ + u16 tx_op_limit; +}; + +#define CONF_TX_MAX_TID_COUNT 8 + +enum { + CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/ + CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/ + CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/ +}; + +enum { + CONF_PS_SCHEME_LEGACY = 0, + CONF_PS_SCHEME_UPSD_TRIGGER = 1, + CONF_PS_SCHEME_LEGACY_PSPOLL = 2, + CONF_PS_SCHEME_SAPSD = 3, +}; + +enum { + CONF_ACK_POLICY_LEGACY = 0, + CONF_ACK_POLICY_NO_ACK = 1, + CONF_ACK_POLICY_BLOCK = 2, +}; + + +struct conf_tx_tid { + u8 queue_id; + u8 channel_type; + u8 tsid; + u8 ps_scheme; + u8 ack_policy; + u32 apsd_conf[2]; +}; + +struct conf_tx_settings { + /* + * The TX ED value for TELEC Enable/Disable. + * + * Range: 0, 1 + */ + u8 tx_energy_detection; + + /* + * Configuration for rate classes for TX (currently only one + * rate class supported.) + */ + struct conf_tx_rate_class rc_conf; + + /* + * Configuration for access categories for TX rate control. + */ + u8 ac_conf_count; + struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT]; + + /* + * Configuration for TID parameters. + */ + u8 tid_conf_count; + struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT]; + + /* + * The TX fragmentation threshold. + * + * Range: u16 + */ + u16 frag_threshold; + + /* + * Max time in msec the FW may delay frame TX-Complete interrupt. + * + * Range: u16 + */ + u16 tx_compl_timeout; + + /* + * Completed TX packet count which requires to issue the TX-Complete + * interrupt. + * + * Range: u16 + */ + u16 tx_compl_threshold; + + /* + * The rate used for control messages and scanning on the 2.4GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate; + + /* + * The rate used for control messages and scanning on the 5GHz band + * + * Range: CONF_HW_BIT_RATE_* bit mask + */ + u32 basic_rate_5; +}; + +enum { + CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/ + CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/ + CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */ + CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */ + CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F +}; + +#define CONF_MAX_BCN_FILT_IE_COUNT 32 + +#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0) +#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1) + +#define CONF_BCN_IE_OUI_LEN 3 +#define CONF_BCN_IE_VER_LEN 2 + +struct conf_bcn_filt_rule { + /* + * IE number to which to associate a rule. + * + * Range: u8 + */ + u8 ie; + + /* + * Rule to associate with the specific ie. + * + * Range: CONF_BCN_RULE_PASS_ON_* + */ + u8 rule; + + /* + * OUI for the vendor specifie IE (221) + */ + u8 oui[CONF_BCN_IE_OUI_LEN]; + + /* + * Type for the vendor specifie IE (221) + */ + u8 type; + + /* + * Version for the vendor specifie IE (221) + */ + u8 version[CONF_BCN_IE_VER_LEN]; +}; + +#define CONF_MAX_RSSI_SNR_TRIGGERS 8 + +enum { + CONF_TRIG_METRIC_RSSI_BEACON = 0, + CONF_TRIG_METRIC_RSSI_DATA, + CONF_TRIG_METRIC_SNR_BEACON, + CONF_TRIG_METRIC_SNR_DATA +}; + +enum { + CONF_TRIG_EVENT_TYPE_LEVEL = 0, + CONF_TRIG_EVENT_TYPE_EDGE +}; + +enum { + CONF_TRIG_EVENT_DIR_LOW = 0, + CONF_TRIG_EVENT_DIR_HIGH, + CONF_TRIG_EVENT_DIR_BIDIR +}; + +struct conf_sig_weights { + + /* + * RSSI from beacons average weight. + * + * Range: u8 + */ + u8 rssi_bcn_avg_weight; + + /* + * RSSI from data average weight. + * + * Range: u8 + */ + u8 rssi_pkt_avg_weight; + + /* + * SNR from beacons average weight. + * + * Range: u8 + */ + u8 snr_bcn_avg_weight; + + /* + * SNR from data average weight. + * + * Range: u8 + */ + u8 snr_pkt_avg_weight; +}; + +enum conf_bcn_filt_mode { + CONF_BCN_FILT_MODE_DISABLED = 0, + CONF_BCN_FILT_MODE_ENABLED = 1 +}; + +enum conf_bet_mode { + CONF_BET_MODE_DISABLE = 0, + CONF_BET_MODE_ENABLE = 1, +}; + +struct conf_conn_settings { + /* + * Firmware wakeup conditions configuration. The host may set only + * one bit. + * + * Range: CONF_WAKE_UP_EVENT_* + */ + u8 wake_up_event; + + /* + * Listen interval for beacons or Dtims. + * + * Range: 0 for beacon and Dtim wakeup + * 1-10 for x Dtims + * 1-255 for x beacons + */ + u8 listen_interval; + + /* + * Enable or disable the beacon filtering. + * + * Range: CONF_BCN_FILT_MODE_* + */ + enum conf_bcn_filt_mode bcn_filt_mode; + + /* + * Configure Beacon filter pass-thru rules. + */ + u8 bcn_filt_ie_count; + struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT]; + + /* + * The number of consequtive beacons to lose, before the firmware + * becomes out of synch. + * + * Range: u32 + */ + u32 synch_fail_thold; + + /* + * After out-of-synch, the number of TU's to wait without a further + * received beacon (or probe response) before issuing the BSS_EVENT_LOSE + * event. + * + * Range: u32 + */ + u32 bss_lose_timeout; + + /* + * Beacon receive timeout. + * + * Range: u32 + */ + u32 beacon_rx_timeout; + + /* + * Broadcast receive timeout. + * + * Range: u32 + */ + u32 broadcast_timeout; + + /* + * Enable/disable reception of broadcast packets in power save mode + * + * Range: 1 - enable, 0 - disable + */ + u8 rx_broadcast_in_ps; + + /* + * Consequtive PS Poll failures before sending event to driver + * + * Range: u8 + */ + u8 ps_poll_threshold; + + /* + * PS Poll failure recovery ACTIVE period length + * + * Range: u32 (ms) + */ + u32 ps_poll_recovery_period; + + /* + * Configuration of signal average weights. + */ + struct conf_sig_weights sig_weights; + + /* + * Specifies if beacon early termination procedure is enabled or + * disabled. + * + * Range: CONF_BET_MODE_* + */ + u8 bet_enable; + + /* + * Specifies the maximum number of consecutive beacons that may be + * early terminated. After this number is reached at least one full + * beacon must be correctly received in FW before beacon ET + * resumes. + * + * Range 0 - 255 + */ + u8 bet_max_consecutive; + + /* + * Specifies the maximum number of times to try PSM entry if it fails + * (if sending the appropriate null-func message fails.) + * + * Range 0 - 255 + */ + u8 psm_entry_retries; + + /* + * Specifies the maximum number of times to try transmit the PSM entry + * null-func frame for each PSM entry attempt + * + * Range 0 - 255 + */ + u8 psm_entry_nullfunc_retries; + + /* + * Specifies the time to linger in active mode after successfully + * transmitting the PSM entry null-func frame. + * + * Range 0 - 255 TU's + */ + u8 psm_entry_hangover_period; + + /* + * + * Specifies the interval of the connection keep-alive null-func + * frame in ms. + * + * Range: 1000 - 3600000 + */ + u32 keep_alive_interval; + + /* + * Maximum listen interval supported by the driver in units of beacons. + * + * Range: u16 + */ + u8 max_listen_interval; +}; + +enum { + CONF_REF_CLK_19_2_E, + CONF_REF_CLK_26_E, + CONF_REF_CLK_38_4_E, + CONF_REF_CLK_52_E +}; + +enum single_dual_band_enum { + CONF_SINGLE_BAND, + CONF_DUAL_BAND +}; + +#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15 +#define CONF_NUMBER_OF_SUB_BANDS_5 7 +#define CONF_NUMBER_OF_RATE_GROUPS 6 +#define CONF_NUMBER_OF_CHANNELS_2_4 14 +#define CONF_NUMBER_OF_CHANNELS_5 35 + +struct conf_radio_parms { + /* + * FEM parameter set to use + * + * Range: 0 or 1 + */ + u8 fem; +}; + +struct conf_itrim_settings { + /* enable dco itrim */ + u8 enable; + + /* moderation timeout in microsecs from the last TX */ + u32 timeout; +}; + +struct conf_pm_config_settings { + /* + * Host clock settling time + * + * Range: 0 - 30000 us + */ + u32 host_clk_settling_time; + + /* + * Host fast wakeup support + * + * Range: true, false + */ + bool host_fast_wakeup_support; +}; + +struct conf_roam_trigger_settings { + /* + * The minimum interval between two trigger events. + * + * Range: 0 - 60000 ms + */ + u16 trigger_pacing; + + /* + * The weight for rssi/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_beacon; + + /* + * The weight for rssi/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_rssi_data; + + /* + * The weight for snr/beacon average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_beacon; + + /* + * The weight for snr/data frame average calculation + * + * Range: 0 - 255 + */ + u8 avg_weight_snr_data; +}; + +struct conf_scan_settings { + /* + * The minimum time to wait on each channel for active scans + * + * Range: 0 - 65536 tu + */ + u16 min_dwell_time_active; + + /* + * The maximum time to wait on each channel for active scans + * + * Range: 0 - 65536 tu + */ + u16 max_dwell_time_active; + + /* + * The maximum time to wait on each channel for passive scans + * + * Range: 0 - 65536 tu + */ + u16 min_dwell_time_passive; + + /* + * The maximum time to wait on each channel for passive scans + * + * Range: 0 - 65536 tu + */ + u16 max_dwell_time_passive; + + /* + * Number of probe requests to transmit on each active scan channel + * + * Range: u8 + */ + u16 num_probe_reqs; + +}; + +/* these are number of channels on the band divided by two, rounded up */ +#define CONF_TX_PWR_COMPENSATION_LEN_2 7 +#define CONF_TX_PWR_COMPENSATION_LEN_5 18 + +struct conf_rf_settings { + /* + * Per channel power compensation for 2.4GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_2[CONF_TX_PWR_COMPENSATION_LEN_2]; + + /* + * Per channel power compensation for 5GHz + * + * Range: s8 + */ + u8 tx_per_channel_power_compensation_5[CONF_TX_PWR_COMPENSATION_LEN_5]; +}; + +struct conf_drv_settings { + struct conf_sg_settings sg; + struct conf_rx_settings rx; + struct conf_tx_settings tx; + struct conf_conn_settings conn; + struct conf_itrim_settings itrim; + struct conf_pm_config_settings pm_config; + struct conf_roam_trigger_settings roam_trigger; + struct conf_scan_settings scan; + struct conf_rf_settings rf; +}; + +#endif |