wl1251: remove wl1251_ops

Now wl1271 is splitted to separate files, no need to use wl1251_ops anymore.
So remove struct wl1251_chip and wl1251_ops.c.

Signed-off-by: Kalle Valo <kalle.valo@nokia.com>
Reviewed-by: Vidhya Govindan <vidhya.govindan@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 18 insertions, 37 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1251.h b/drivers/net/wireless/wl12xx/wl1251.h
index 13f0589beec..44c5001beed 100644
--- a/drivers/net/wireless/wl12xx/wl1251.h
+++ b/drivers/net/wireless/wl12xx/wl1251.h
@@ -143,35 +143,6 @@ struct wl1251_partition_set {
 
 struct wl1251;
 
-/* FIXME: I'm not sure about this structure name */
-struct wl1251_chip {
-	u32 id;
-
-	const char *fw_filename;
-	const char *nvs_filename;
-
-	char fw_ver[21];
-
-	unsigned int power_on_sleep;
-	int intr_cmd_complete;
-	int intr_init_complete;
-
-	int (*op_upload_fw)(struct wl1251 *wl);
-	int (*op_upload_nvs)(struct wl1251 *wl);
-	int (*op_boot)(struct wl1251 *wl);
-	void (*op_set_ecpu_ctrl)(struct wl1251 *wl, u32 flag);
-	void (*op_target_enable_interrupts)(struct wl1251 *wl);
-	int (*op_hw_init)(struct wl1251 *wl);
-	int (*op_plt_init)(struct wl1251 *wl);
-	void (*op_tx_flush)(struct wl1251 *wl);
-	void (*op_fw_version)(struct wl1251 *wl);
-	int (*op_cmd_join)(struct wl1251 *wl, u8 bss_type, u8 dtim_interval,
-			    u16 beacon_interval, u8 wait);
-
-	struct wl1251_partition_set *p_table;
-	enum wl12xx_acx_int_reg *acx_reg_table;
-};
-
 struct wl1251_stats {
 	struct acx_statistics *fw_stats;
 	unsigned long fw_stats_update;
@@ -307,8 +278,6 @@ struct wl1251 {
 	int virtual_mem_addr;
 	int virtual_reg_addr;
 
-	struct wl1251_chip chip;
-
 	int cmd_box_addr;
 	int event_box_addr;
 	struct boot_attr boot_attr;
@@ -401,6 +370,9 @@ struct wl1251 {
 	u32 buffer_cmd;
 	u8 buffer_busyword[WL1251_BUSY_WORD_LEN];
 	struct wl1251_rx_descriptor *rx_descriptor;
+
+	u32 chip_id;
+	char fw_ver[21];
 };
 
 int wl1251_plt_start(struct wl1251 *wl);
@@ -420,16 +392,25 @@ void wl1251_disable_interrupts(struct wl1251 *wl);
 
 #define WL1251_TX_QUEUE_MAX_LENGTH 20
 
-/* Different chips need different sleep times after power on.  WL1271 needs
- * 200ms, WL1251 needs only 10ms.  By default we use 200ms, but as soon as we
- * know the chip ID, we change the sleep value in the wl1251 chip structure,
- * so in subsequent power ons, we don't waste more time then needed.  */
-#define WL1251_DEFAULT_POWER_ON_SLEEP 200
-
 #define CHIP_ID_1251_PG10	           (0x7010101)
 #define CHIP_ID_1251_PG11	           (0x7020101)
 #define CHIP_ID_1251_PG12	           (0x7030101)
 #define CHIP_ID_1271_PG10	           (0x4030101)
 #define CHIP_ID_1271_PG20	           (0x4030111)
 
+#define WL1251_FW_NAME "wl1251-fw.bin"
+#define WL1251_NVS_NAME "wl1251-nvs.bin"
+
+#define WL1251_POWER_ON_SLEEP 10 /* in miliseconds */
+
+#define WL1251_PART_DOWN_MEM_START	0x0
+#define WL1251_PART_DOWN_MEM_SIZE	0x16800
+#define WL1251_PART_DOWN_REG_START	REGISTERS_BASE
+#define WL1251_PART_DOWN_REG_SIZE	REGISTERS_DOWN_SIZE
+
+#define WL1251_PART_WORK_MEM_START	0x28000
+#define WL1251_PART_WORK_MEM_SIZE	0x14000
+#define WL1251_PART_WORK_REG_START	REGISTERS_BASE
+#define WL1251_PART_WORK_REG_SIZE	REGISTERS_WORK_SIZE
+
 #endif