wl1271: Use NVS INI file configuration

Replace the hardcoded general and radio parameter configuration in the driver
with configuration taken from the NVS file directly. Also remove the driver
dependency to the structures with the parameter data.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 3 insertions, 141 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h
index 1993d63c214..6f9e75cc564 100644
--- a/drivers/net/wireless/wl12xx/wl1271_conf.h
+++ b/drivers/net/wireless/wl12xx/wl1271_conf.h
@@ -735,81 +735,6 @@ enum single_dual_band_enum {
 	CONF_DUAL_BAND
 };
 
-
-#define CONF_MAX_SMART_REFLEX_PARAMS 16
-
-struct conf_general_parms {
-	/*
-	 * RF Reference Clock type / speed
-	 *
-	 * Range: CONF_REF_CLK_*
-	 */
-	u8 ref_clk;
-
-	/*
-	 * Settling time of the reference clock after boot.
-	 *
-	 * Range: u8
-	 */
-	u8 settling_time;
-
-	/*
-	 * Flag defining whether clock is valid on wakeup.
-	 *
-	 * Range: 0 - not valid on wakeup, 1 - valid on wakeup
-	 */
-	u8 clk_valid_on_wakeup;
-
-	/*
-	 * DC-to-DC mode.
-	 *
-	 * Range: Unknown
-	 */
-	u8 dc2dcmode;
-
-	/*
-	 * Flag defining whether used as single or dual-band.
-	 *
-	 * Range: CONF_SINGLE_BAND, CONF_DUAL_BAND
-	 */
-	u8 single_dual_band;
-
-	/*
-	 * TX bip fem autodetect flag.
-	 *
-	 * Range: Unknown
-	 */
-	u8 tx_bip_fem_autodetect;
-
-	/*
-	 * TX bip gem manufacturer.
-	 *
-	 * Range: Unknown
-	 */
-	u8 tx_bip_fem_manufacturer;
-
-	/*
-	 * Settings flags.
-	 *
-	 * Range: Unknown
-	 */
-	u8 settings;
-
-	/* Smart reflex settings */
-	u8 sr_state;
-
-	s8 srf1[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf2[CONF_MAX_SMART_REFLEX_PARAMS];
-	s8 srf3[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	s8 sr_debug_table[CONF_MAX_SMART_REFLEX_PARAMS];
-
-	u8 sr_sen_n_p;
-	u8 sr_sen_n_p_gain;
-	u8 sr_sen_nrn;
-	u8 sr_sen_prn;
-};
-
 #define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
 #define CONF_NUMBER_OF_SUB_BANDS_5  7
 #define CONF_NUMBER_OF_RATE_GROUPS  6
@@ -818,78 +743,15 @@ struct conf_general_parms {
 
 struct conf_radio_parms {
 	/*
-	 * Static radio parameters for 2.4GHz
-	 *
-	 * Range: unknown
-	 */
-	u8 rx_trace_loss;
-	u8 tx_trace_loss;
-	s8 rx_rssi_and_proc_compens[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/*
-	 * Static radio parameters for 5GHz
-	 *
-	 * Range: unknown
-	 */
-	u8 rx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8 tx_trace_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8 rx_rssi_and_proc_compens_5[CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE];
-
-	/*
-	 * Dynamic radio parameters for 2.4GHz
+	 * FEM parameter set to use
 	 *
-	 * Range: unknown
+	 * Range: 0 or 1
 	 */
-	u16 tx_ref_pd_voltage;
-	u8  tx_ref_power;
-	s8  tx_offset_db;
-
-	s8  tx_rate_limits_normal[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_11b[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_channel_limits_ofdm[CONF_NUMBER_OF_CHANNELS_2_4];
-	s8  tx_pdv_rate_offsets[CONF_NUMBER_OF_RATE_GROUPS];
-
-	u8  tx_ibias[CONF_NUMBER_OF_RATE_GROUPS];
-	u8  rx_fem_insertion_loss;
-
-	u8  degraded_low_to_normal_threshold;
-	u8  degraded_normal_to_high_threshold;
-
-
-	/*
-	 * Dynamic radio parameters for 5GHz
-	 *
-	 * Range: unknown
-	 */
-	u16 tx_ref_pd_voltage_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	u8  tx_ref_power_5[CONF_NUMBER_OF_SUB_BANDS_5];
-	s8  tx_offset_db_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	s8  tx_rate_limits_normal_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_degraded_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  tx_rate_limits_extreme_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	s8  tx_channel_limits_ofdm_5[CONF_NUMBER_OF_CHANNELS_5];
-	s8  tx_pdv_rate_offsets_5[CONF_NUMBER_OF_RATE_GROUPS];
-
-	/* FIXME: this is inconsistent with the types for 2.4GHz */
-	s8  tx_ibias_5[CONF_NUMBER_OF_RATE_GROUPS];
-	s8  rx_fem_insertion_loss_5[CONF_NUMBER_OF_SUB_BANDS_5];
-
-	u8  degraded_low_to_normal_threshold_5;
-	u8  degraded_normal_to_high_threshold_5;
+	u8 fem;
 };
 
 struct conf_init_settings {
 	/*
-	 * Configure general parameters.
-	 */
-	struct conf_general_parms genparam;
-
-	/*
 	 * Configure radio parameters.
 	 */
 	struct conf_radio_parms radioparam;