wl1271: Use NVS INI file configuration

Replace the hardcoded general and radio parameter configuration in the driver
with configuration taken from the NVS file directly. Also remove the driver
dependency to the structures with the parameter data.

Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
Reviewed-by: Kalle Valo <kalle.valo@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 6 insertions, 95 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c
index 6f7a7d94635..282c2bbfec8 100644
--- a/drivers/net/wireless/wl12xx/wl1271_main.c
+++ b/drivers/net/wireless/wl12xx/wl1271_main.c
@@ -229,93 +229,8 @@ static struct conf_drv_settings default_conf = {
 		.psm_entry_retries           = 3
 	},
 	.init = {
-		.genparam                    = {
-			.ref_clk             = CONF_REF_CLK_38_4_E,
-			.settling_time       = 5,
-			.clk_valid_on_wakeup = 0,
-			.dc2dcmode           = 0,
-			.single_dual_band    = CONF_SINGLE_BAND,
-			.tx_bip_fem_autodetect = 1,
-			.tx_bip_fem_manufacturer = 1,
-			.settings = 1,
-			.sr_state = 1,
-			.srf1 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf2 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.srf3 = { 0x07, 0x03, 0x18, 0x10, 0x05, 0xfb, 0xf0,
-				  0xe8, 0, 0, 0, 0, 0, 0, 0, 0 },
-			.sr_debug_table = { 0, 0, 0, 0, 0, 0, 0, 0,
-					    0, 0, 0, 0, 0, 0, 0, 0 },
-			.sr_sen_n_p = 0,
-			.sr_sen_n_p_gain = 0,
-			.sr_sen_nrn = 0,
-			.sr_sen_prn = 0,
-		},
 		.radioparam = {
-			.rx_trace_loss       = 0x24,
-			.tx_trace_loss       = 0x0,
-			.rx_rssi_and_proc_compens = {
-				0xec, 0xf6, 0x00, 0x0c, 0x18, 0xf8,
-				0xfc, 0x00, 0x80, 0x10, 0xf0, 0xf8,
-				0x00, 0x0a, 0x14 },
-			.rx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
-			.tx_trace_loss_5     = { 0, 0, 0, 0, 0, 0, 0 },
-			.rx_rssi_and_proc_compens_5 = {
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
-				0x00, 0x00, 0x00 },
-			.tx_ref_pd_voltage   = 0x1a9,
-			.tx_ref_power        = 0x80,
-			.tx_offset_db        = 0x0,
-			.tx_rate_limits_normal = {
-				0x1d, 0x1f, 0x24, 0x28, 0x28, 0x29 },
-			.tx_rate_limits_degraded = {
-				0x19, 0x1f, 0x22, 0x23, 0x27, 0x28 },
-			.tx_rate_limits_extreme = {
-				0x19, 0x1c, 0x1e, 0x20, 0x24, 0x25 },
-			.tx_channel_limits_11b = {
-				0x22, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x22, 0x50,
-				0x22, 0x50 },
-			.tx_channel_limits_ofdm = {
-				0x20, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x20, 0x50,
-				0x20, 0x50 },
-			.tx_pdv_rate_offsets = {
-				0x07, 0x08, 0x04, 0x02, 0x02, 0x00 },
-			.tx_ibias            = {
-				0x11, 0x11, 0x15, 0x11, 0x15, 0x0f },
-			.rx_fem_insertion_loss = 0x0e,
-			.degraded_low_to_normal_threshold = 0x1e,
-			.degraded_normal_to_high_threshold = 0x2d,
-			.tx_ref_pd_voltage_5 = {
-				0x0190, 0x01a4, 0x01c3, 0x01d8,
-				0x020a, 0x021c },
-			.tx_ref_power_5      = {
-				0x80, 0x80, 0x80, 0x80, 0x80, 0x80, 0x80 },
-			.tx_offset_db_5      = {
-				0x00, 0x00, 0x00, 0x00, 0x00, 0x00 },
-			.tx_rate_limits_normal_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_rate_limits_degraded_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_rate_limits_extreme_5 = {
-				0x1b, 0x1e, 0x21, 0x23, 0x27, 0x00 },
-			.tx_channel_limits_ofdm_5 = {
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50, 0x50,
-				0x50, 0x50, 0x50 },
-			.tx_pdv_rate_offsets_5 = {
-				0x01, 0x02, 0x02, 0x02, 0x02, 0x00 },
-			.tx_ibias_5          = {
-				0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
-			.rx_fem_insertion_loss_5 = {
-				0x10, 0x10, 0x10, 0x10, 0x10, 0x10, 0x10 },
-			.degraded_low_to_normal_threshold_5 = 0x00,
-			.degraded_normal_to_high_threshold_5 = 0x00
+			.fem                 = 1,
 		}
 	},
 	.itrim = {
@@ -345,9 +260,6 @@ static void wl1271_conf_init(struct wl1271 *wl)
 
 	/* apply driver default configuration */
 	memcpy(&wl->conf, &default_conf, sizeof(default_conf));
-
-	if (wl1271_11a_enabled())
-		wl->conf.init.genparam.single_dual_band = CONF_DUAL_BAND;
 }
 
 
@@ -567,15 +479,14 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		return ret;
 	}
 
-	if (fw->size % 4) {
-		wl1271_error("nvs size is not multiple of 32 bits: %zu",
-			     fw->size);
+	if (fw->size != sizeof(struct wl1271_nvs_file)) {
+		wl1271_error("nvs size is not as expected: %zu != %zu",
+			     fw->size, sizeof(struct wl1271_nvs_file));
 		ret = -EILSEQ;
 		goto out;
 	}
 
-	wl->nvs_len = fw->size;
-	wl->nvs = kmalloc(wl->nvs_len, GFP_KERNEL);
+	wl->nvs = kmalloc(sizeof(struct wl1271_nvs_file), GFP_KERNEL);
 
 	if (!wl->nvs) {
 		wl1271_error("could not allocate memory for the nvs file");
@@ -583,7 +494,7 @@ static int wl1271_fetch_nvs(struct wl1271 *wl)
 		goto out;
 	}
 
-	memcpy(wl->nvs, fw->data, wl->nvs_len);
+	memcpy(wl->nvs, fw->data, sizeof(struct wl1271_nvs_file));
 
 	ret = 0;