Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (22 commits)
  pcmcia: synclink_cs: fix information leak to userland
  pcmcia: don't call flush_scheduled_work() spuriously
  serial_cs: drop spurious flush_scheduled_work() call
  pcmcia/yenta: guide users in case of problems with O2-bridges
  pcmcia: fix unused function compile warning
  pcmcia: vrc4173_cardu: Fix error path for pci_release_regions and pci_disable_device
  pcmcia: add a few debug statements
  pcmcia: remove obsolete and wrong comments
  pcmcia: avoid messages on module (un)loading
  pcmcia: move driver name to struct pcmcia_driver
  pcmcia: remove the "Finally, report what we've done" message
  pcmcia: use autoconfiguration feature for ioports and iomem
  pcmcia: introduce autoconfiguration feature
  pcmcia: Documentation update
  pcmcia: convert pcmcia_request_configuration to pcmcia_enable_device
  pcmcia: move config_{base,index,regs} to struct pcmcia_device
  pcmcia: simplify IntType
  pcmcia: simplify Status, ExtStatus register access
  pcmcia: remove Pin, Copy configuration register access
  pcmcia: move Vpp setup to struct pcmcia_device
  ...

1 files changed, 4 insertions, 43 deletions

diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index a1cc2d498a1..ca3f8961fa2 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -48,7 +48,6 @@
 
 #include <net/iw_handler.h>
 
-#include <pcmcia/cs.h>
 #include <pcmcia/cistpl.h>
 #include <pcmcia/cisreg.h>
 #include <pcmcia/ds.h>
@@ -78,13 +77,6 @@
 #define WL3501_RESUME	0
 #define WL3501_SUSPEND	1
 
-/*
- * The event() function is this driver's Card Services event handler.  It will
- * be called by Card Services when an appropriate card status event is
- * received. The config() and release() entry points are used to configure or
- * release a socket, in response to card insertion and ejection events.  They
- * are invoked from the wl24 event handler.
- */
 static int wl3501_config(struct pcmcia_device *link);
 static void wl3501_release(struct pcmcia_device *link);
 
@@ -1869,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = {
 	.ndo_validate_addr	= eth_validate_addr,
 };
 
-/**
- * wl3501_attach - creates an "instance" of the driver
- *
- * Creates an "instance" of the driver, allocating local data structures for
- * one device.  The device is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually configure the
- * card at this point -- we wait until we receive a card insertion event.
- */
 static int wl3501_probe(struct pcmcia_device *p_dev)
 {
 	struct net_device *dev;
@@ -1888,9 +1871,8 @@ static int wl3501_probe(struct pcmcia_device *p_dev)
 	p_dev->resource[0]->flags	= IO_DATA_PATH_WIDTH_8;
 
 	/* General socket configuration */
-	p_dev->conf.Attributes	= CONF_ENABLE_IRQ;
-	p_dev->conf.IntType	= INT_MEMORY_AND_IO;
-	p_dev->conf.ConfigIndex	= 1;
+	p_dev->config_flags	= CONF_ENABLE_IRQ;
+	p_dev->config_index	= 1;
 
 	dev = alloc_etherdev(sizeof(struct wl3501_card));
 	if (!dev)
@@ -1914,14 +1896,6 @@ out_link:
 	return -ENOMEM;
 }
 
-/**
- * wl3501_config - configure the PCMCIA socket and make eth device available
- * @link - FILL_IN
- *
- * wl3501_config() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- */
 static int wl3501_config(struct pcmcia_device *link)
 {
 	struct net_device *dev = link->priv;
@@ -1952,10 +1926,7 @@ static int wl3501_config(struct pcmcia_device *link)
 	if (ret)
 		goto failed;
 
-	/* This actually configures the PCMCIA socket -- setting up the I/O
-	 * windows and the interrupt mapping.  */
-
-	ret = pcmcia_request_configuration(link, &link->conf);
+	ret = pcmcia_enable_device(link);
 	if (ret)
 		goto failed;
 
@@ -2010,14 +1981,6 @@ failed:
 	return -ENODEV;
 }
 
-/**
- * wl3501_release - unregister the net, release PCMCIA configuration
- * @arg - link
- *
- * After a card is removed, wl3501_release() will unregister the net device,
- * and release the PCMCIA configuration.  If the device is still open, this
- * will be postponed until it is closed.
- */
 static void wl3501_release(struct pcmcia_device *link)
 {
 	pcmcia_disable_device(link);
@@ -2056,9 +2019,7 @@ MODULE_DEVICE_TABLE(pcmcia, wl3501_ids);
 
 static struct pcmcia_driver wl3501_driver = {
 	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "wl3501_cs",
-	},
+	.name		= "wl3501_cs",
 	.probe		= wl3501_probe,
 	.remove		= wl3501_detach,
 	.id_table	= wl3501_ids,