tree-wide: fix assorted typos all over the place

That is "success", "unknown", "through", "performance", "[re|un]mapping"
, "access", "default", "reasonable", "[con]currently", "temperature"
, "channel", "[un]used", "application", "example","hierarchy", "therefore"
, "[over|under]flow", "contiguous", "threshold", "enough" and others.

Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>

16 files changed, 24 insertions, 24 deletions

diff --git a/drivers/net/wireless/ath/ath5k/phy.c b/drivers/net/wireless/ath/ath5k/phy.c
index 1a039f2bd73..6f04cc758dc 100644
--- a/drivers/net/wireless/ath/ath5k/phy.c
+++ b/drivers/net/wireless/ath/ath5k/phy.c
@@ -117,7 +117,7 @@ static unsigned int ath5k_hw_rfb_op(struct ath5k_hw *ah,
 
 /*
  * This code is used to optimize rf gain on different environments
- * (temprature mostly) based on feedback from a power detector.
+ * (temperature mostly) based on feedback from a power detector.
  *
  * It's only used on RF5111 and RF5112, later RF chips seem to have
  * auto adjustment on hw -notice they have a much smaller BANK 7 and
@@ -2675,7 +2675,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 		/* Fill curves in reverse order
 		 * from lower power (max gain)
 		 * to higher power. Use curve -> idx
-		 * backmaping we did on eeprom init */
+		 * backmapping we did on eeprom init */
 		u8 idx = pdg_curve_to_idx[pdg];
 
 		/* Grab the needed curves by index */
@@ -2777,7 +2777,7 @@ ath5k_setup_channel_powertable(struct ath5k_hw *ah,
 	/* Now we have a set of curves for this
 	 * channel on tmpL (x range is table_max - table_min
 	 * and y values are tmpL[pdg][]) sorted in the same
-	 * order as EEPROM (because we've used the backmaping).
+	 * order as EEPROM (because we've used the backmapping).
 	 * So for RF5112 it's from higher power to lower power
 	 * and for RF2413 it's from lower power to higher power.
 	 * For RF5111 we only have one curve. */
diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c
index 1895d63aad0..0a35ee62a02 100644
--- a/drivers/net/wireless/ath/ath9k/rc.c
+++ b/drivers/net/wireless/ath/ath9k/rc.c
@@ -969,7 +969,7 @@ static bool ath_rc_update_per(struct ath_softc *sc,
 				 * Since this probe succeeded, we allow the next
 				 * probe twice as soon.  This allows the maxRate
 				 * to move up faster if the probes are
-				 * succesful.
+				 * successful.
 				 */
 				ath_rc_priv->probe_time =
 					now_msec - rate_table->probe_interval / 2;
diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c
index a741d37fd96..e1b33002320 100644
--- a/drivers/net/wireless/ipw2x00/ipw2100.c
+++ b/drivers/net/wireless/ipw2x00/ipw2100.c
@@ -551,7 +551,7 @@ static int ipw2100_get_ordinal(struct ipw2100_priv *priv, u32 ord,
 		/* get number of entries */
 		field_count = *(((u16 *) & field_info) + 1);
 
-		/* abort if no enought memory */
+		/* abort if no enough memory */
 		total_length = field_len * field_count;
 		if (total_length > *len) {
 			*len = total_length;
@@ -3044,7 +3044,7 @@ static void ipw2100_tx_send_data(struct ipw2100_priv *priv)
 			     IPW_MAX_BDS)) {
 			/* TODO: Support merging buffers if more than
 			 * IPW_MAX_BDS are used */
-			IPW_DEBUG_INFO("%s: Maximum BD theshold exceeded.  "
+			IPW_DEBUG_INFO("%s: Maximum BD threshold exceeded.  "
 				       "Increase fragmentation level.\n",
 				       priv->net_dev->name);
 		}
@@ -6823,7 +6823,7 @@ static int ipw2100_wx_get_range(struct net_device *dev,
 	range->max_qual.updated = 7;	/* Updated all three */
 
 	range->avg_qual.qual = 70;	/* > 8% missed beacons is 'bad' */
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 20 + IPW2100_RSSI_TO_DBM;
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7;	/* Updated all three */
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 9b0f2c0646e..b2aa960b834 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -787,7 +787,7 @@ static int ipw_get_ordinal(struct ipw_priv *priv, u32 ord, void *val, u32 * len)
 		/* get number of entries */
 		field_count = *(((u16 *) & field_info) + 1);
 
-		/* abort if not enought memory */
+		/* abort if not enough memory */
 		total_len = field_len * field_count;
 		if (total_len > *len) {
 			*len = total_len;
@@ -7751,7 +7751,7 @@ static void ipw_rebuild_decrypted_skb(struct ipw_priv *priv,
 	case SEC_LEVEL_0:
 		break;
 	default:
-		printk(KERN_ERR "Unknow security level %d\n",
+		printk(KERN_ERR "Unknown security level %d\n",
 		       priv->ieee->sec.level);
 		break;
 	}
@@ -8917,7 +8917,7 @@ static int ipw_wx_get_range(struct net_device *dev,
 	range->max_qual.updated = 7;	/* Updated all three */
 
 	range->avg_qual.qual = 70;
-	/* TODO: Find real 'good' to 'bad' threshol value for RSSI */
+	/* TODO: Find real 'good' to 'bad' threshold value for RSSI */
 	range->avg_qual.level = 0;	/* FIXME to real average level */
 	range->avg_qual.noise = 0;
 	range->avg_qual.updated = 7;	/* Updated all three */
@@ -10290,7 +10290,7 @@ static int ipw_tx_skb(struct ipw_priv *priv, struct libipw_txb *txb,
 		case SEC_LEVEL_0:
 			break;
 		default:
-			printk(KERN_ERR "Unknow security level %d\n",
+			printk(KERN_ERR "Unknown security level %d\n",
 			       priv->ieee->sec.level);
 			break;
 		}
diff --git a/drivers/net/wireless/ipw2x00/libipw_module.c b/drivers/net/wireless/ipw2x00/libipw_module.c
index be5b809ec97..20b8a8a2064 100644
--- a/drivers/net/wireless/ipw2x00/libipw_module.c
+++ b/drivers/net/wireless/ipw2x00/libipw_module.c
@@ -199,7 +199,7 @@ struct net_device *alloc_ieee80211(int sizeof_priv, int monitor)
 	ieee->host_decrypt = 1;
 	ieee->host_mc_decrypt = 1;
 
-	/* Host fragementation in Open mode. Default is enabled.
+	/* Host fragmentation in Open mode. Default is enabled.
 	 * Note: host fragmentation is always enabled if host encryption
 	 * is enabled. For cards can do hardware encryption, they must do
 	 * hardware fragmentation as well. So we don't need a variable
diff --git a/drivers/net/wireless/iwmc3200wifi/hal.c b/drivers/net/wireless/iwmc3200wifi/hal.c
index c430418248b..d13c8853ee8 100644
--- a/drivers/net/wireless/iwmc3200wifi/hal.c
+++ b/drivers/net/wireless/iwmc3200wifi/hal.c
@@ -411,7 +411,7 @@ static void iwm_build_lmac_hdr(struct iwm_priv *iwm, struct iwm_lmac_hdr *hdr,
 /*
  * iwm_hal_send_host_cmd(): sends commands to the UMAC or the LMAC.
  * Sending command to the LMAC is equivalent to sending a
- * regular UMAC command with the LMAC passtrough or the LMAC
+ * regular UMAC command with the LMAC passthrough or the LMAC
  * wrapper UMAC command IDs.
  */
 int iwm_hal_send_host_cmd(struct iwm_priv *iwm,
diff --git a/drivers/net/wireless/iwmc3200wifi/rx.c b/drivers/net/wireless/iwmc3200wifi/rx.c
index 771a301003c..8ddb51a2a97 100644
--- a/drivers/net/wireless/iwmc3200wifi/rx.c
+++ b/drivers/net/wireless/iwmc3200wifi/rx.c
@@ -1448,7 +1448,7 @@ static void iwm_rx_process_packet(struct iwm_priv *iwm,
 		kfree_skb(packet->skb);
 		break;
 	default:
-		IWM_ERR(iwm, "Unknow ticket action: %d\n",
+		IWM_ERR(iwm, "Unknown ticket action: %d\n",
 			le16_to_cpu(ticket_node->ticket->action));
 		kfree_skb(packet->skb);
 	}
diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c
index 485a8d40652..afe6abecc04 100644
--- a/drivers/net/wireless/libertas/if_sdio.c
+++ b/drivers/net/wireless/libertas/if_sdio.c
@@ -934,7 +934,7 @@ static int if_sdio_probe(struct sdio_func *func,
 	}
 
 	if (i == ARRAY_SIZE(if_sdio_models)) {
-		lbs_pr_err("unkown card model 0x%x\n", card->model);
+		lbs_pr_err("unknown card model 0x%x\n", card->model);
 		ret = -ENODEV;
 		goto free;
 	}
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
index bc08464d832..f7f5c793514 100644
--- a/drivers/net/wireless/prism54/isl_ioctl.c
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -1897,7 +1897,7 @@ prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
 	return 0;
 }
 
-/* Setting policy also clears the MAC acl, even if we don't change the defaut
+/* Setting policy also clears the MAC acl, even if we don't change the default
  * policy
  */
 
@@ -2323,7 +2323,7 @@ prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
 
 	case DOT11_OID_BEACON:
 		send_formatted_event(priv,
-				     "Received a beacon from an unkown AP",
+				     "Received a beacon from an unknown AP",
 				     mlme, 0);
 		break;
 
diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h
index ccd644104ad..aced0577569 100644
--- a/drivers/net/wireless/rt2x00/rt2400pci.h
+++ b/drivers/net/wireless/rt2x00/rt2400pci.h
@@ -35,7 +35,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		100
 
diff --git a/drivers/net/wireless/rt2x00/rt2500pci.h b/drivers/net/wireless/rt2x00/rt2500pci.h
index 54d37957883..3db9041838a 100644
--- a/drivers/net/wireless/rt2x00/rt2500pci.h
+++ b/drivers/net/wireless/rt2x00/rt2500pci.h
@@ -46,7 +46,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		121
 
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h
index b01edca4258..d3000827883 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.h
+++ b/drivers/net/wireless/rt2x00/rt2500usb.h
@@ -46,7 +46,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		120
 
diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h
index 93eb699165c..77b5116f549 100644
--- a/drivers/net/wireless/rt2x00/rt61pci.h
+++ b/drivers/net/wireless/rt2x00/rt61pci.h
@@ -37,7 +37,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		120
 
diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h
index 81fe0be51c4..e194332dac5 100644
--- a/drivers/net/wireless/rt2x00/rt73usb.h
+++ b/drivers/net/wireless/rt2x00/rt73usb.h
@@ -37,7 +37,7 @@
 
 /*
  * Signal information.
- * Defaul offset is required for RSSI <-> dBm conversion.
+ * Default offset is required for RSSI <-> dBm conversion.
  */
 #define DEFAULT_RSSI_OFFSET		120
 
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 431a20ec6db..b3b0b5b685c 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4011,7 +4011,7 @@ wavelan_interrupt(int		irq,
 #endif
 
   /* Prevent reentrancy. We need to do that because we may have
-   * multiple interrupt handler running concurently.
+   * multiple interrupt handler running concurrently.
    * It is safe because interrupts are disabled before aquiring
    * the spinlock. */
   spin_lock(&lp->spinlock);
diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c
index 6d666359a42..2b7f9659437 100644
--- a/drivers/net/wireless/zd1211rw/zd_mac.c
+++ b/drivers/net/wireless/zd1211rw/zd_mac.c
@@ -312,7 +312,7 @@ static void tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
  * zd_mac_tx_failed - callback for failed frames
  * @dev: the mac80211 wireless device
  *
- * This function is called if a frame couldn't be succesfully be
+ * This function is called if a frame couldn't be successfully be
  * transferred. The first frame from the tx queue, will be selected and
  * reported as error to the upper layers.
  */