pcmcia: pcmcia_config_loop() default CIS entry handling

Many drivers use the default CIS entry within their pcmcia_config_loop()
callback function. Therefore, factor the default CIS entry handling out.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

5 files changed, 52 insertions, 68 deletions

diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index d7216730f18..657adf85ab7 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -206,19 +206,12 @@ static void airo_detach(struct pcmcia_device *link)
 #define CS_CHECK(fn, ret) \
 do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
 
-struct airo_cs_config_data {
-	cistpl_cftable_entry_t dflt;
-	win_req_t req;
-};
-
 static int airo_cs_config_check(struct pcmcia_device *p_dev,
 				cistpl_cftable_entry_t *cfg,
+				cistpl_cftable_entry_t *dflt,
 				void *priv_data)
 {
-	struct airo_cs_config_data *cfg_mem = priv_data;
-
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
+	win_req_t *req = priv_data;
 
 	if (cfg->index == 0)
 		return -ENODEV;
@@ -233,17 +226,17 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	/*  Note that the CIS values need to be rescaled */
 	if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
-	else if (cfg_mem->dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+	else if (dflt->vpp1.present & (1<<CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM]/10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
@@ -273,14 +266,14 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 	  needs to be mapped to virtual space with ioremap() before it
 	  is used.
 	*/
-	if ((cfg->mem.nwin > 0) || (cfg_mem->dflt.mem.nwin > 0)) {
-		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &cfg_mem->dflt.mem;
+	if ((cfg->mem.nwin > 0) || (dflt->mem.nwin > 0)) {
+		cistpl_mem_t *mem = (cfg->mem.nwin) ? &cfg->mem : &dflt->mem;
 		memreq_t map;
-		cfg_mem->req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
-		cfg_mem->req.Base = mem->win[0].host_addr;
-		cfg_mem->req.Size = mem->win[0].len;
-		cfg_mem->req.AccessSpeed = 0;
-		if (pcmcia_request_window(&p_dev, &cfg_mem->req, &p_dev->win) != 0)
+		req->Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+		req->Base = mem->win[0].host_addr;
+		req->Size = mem->win[0].len;
+		req->AccessSpeed = 0;
+		if (pcmcia_request_window(&p_dev, req, &p_dev->win) != 0)
 			return -ENODEV;
 		map.Page = 0;
 		map.CardOffset = mem->win[0].card_addr;
@@ -295,15 +288,15 @@ static int airo_cs_config_check(struct pcmcia_device *p_dev,
 static int airo_config(struct pcmcia_device *link)
 {
 	local_info_t *dev;
-	struct airo_cs_config_data *cfg_mem;
+	win_req_t *req;
 	int last_fn, last_ret;
 
 	dev = link->priv;
 
 	DEBUG(0, "airo_config(0x%p)\n", link);
 
-	cfg_mem = kzalloc(sizeof(struct airo_cs_config_data), GFP_KERNEL);
-	if (!cfg_mem)
+	req = kzalloc(sizeof(win_req_t), GFP_KERNEL);
+	if (!req)
 		return -ENOMEM;
 
 	/*
@@ -320,7 +313,7 @@ static int airo_config(struct pcmcia_device *link)
 	 * and most client drivers will only use the CIS to fill in
 	 * implementation-defined details.
 	 */
-	last_ret = pcmcia_loop_config(link, airo_cs_config_check, cfg_mem);
+	last_ret = pcmcia_loop_config(link, airo_cs_config_check, req);
 	if (last_ret)
 		goto failed;
 
@@ -365,17 +358,17 @@ static int airo_config(struct pcmcia_device *link)
 		printk(" & 0x%04x-0x%04x", link->io.BasePort2,
 		       link->io.BasePort2+link->io.NumPorts2-1);
 	if (link->win)
-		printk(", mem 0x%06lx-0x%06lx", cfg_mem->req.Base,
-		       cfg_mem->req.Base+cfg_mem->req.Size-1);
+		printk(", mem 0x%06lx-0x%06lx", req->Base,
+		       req->Base+req->Size-1);
 	printk("\n");
-	kfree(cfg_mem);
+	kfree(req);
 	return 0;
 
  cs_failed:
 	cs_error(link, last_fn, last_ret);
  failed:
 	airo_release(link);
-	kfree(cfg_mem);
+	kfree(req);
 	return -ENODEV;
 } /* airo_config */
 
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 12efd44d64a..c71aae992ec 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -226,14 +226,12 @@ static int card_present(void *arg)
 
 static int atmel_config_check(struct pcmcia_device *p_dev,
 			      cistpl_cftable_entry_t *cfg,
+			      cistpl_cftable_entry_t *dflt,
 			      void *priv_data)
 {
-	cistpl_cftable_entry_t *dflt = priv_data;
-
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		*dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
+
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
 		p_dev->conf.Attributes |= CONF_ENABLE_SPKR;
@@ -278,7 +276,6 @@ static int atmel_config(struct pcmcia_device *link)
 	local_info_t *dev;
 	int last_fn, last_ret;
 	struct pcmcia_device_id *did;
-	cistpl_cftable_entry_t dflt = { 0 };
 
 	dev = link->priv;
 	did = handle_to_dev(link).driver_data;
@@ -297,7 +294,7 @@ static int atmel_config(struct pcmcia_device *link)
 	  these things without consulting the CIS, and most client drivers
 	  will only use the CIS to fill in implementation-defined details.
 	*/
-	if (pcmcia_loop_config(link, atmel_config_check, &dflt))
+	if (pcmcia_loop_config(link, atmel_config_check, NULL))
 		goto failed;
 
 	/*
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 2abaa90b799..f9595ca71a0 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -537,23 +537,21 @@ do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
  * socket and make the device available to the system */
 
 struct prism2_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int prism2_config_check(struct pcmcia_device *p_dev,
 			       cistpl_cftable_entry_t *cfg,
+			       cistpl_cftable_entry_t *dflt,
 			       void *priv_data)
 {
 	struct prism2_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		return -ENODEV;
 
 	PDEBUG(DEBUG_EXTRA, "Checking CFTABLE_ENTRY 0x%02X "
-	       "(default 0x%02X)\n", cfg->index, cfg_mem->dflt.index);
+	       "(default 0x%02X)\n", cfg->index, dflt->index);
 
 	/* Does this card need audio output? */
 	if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
@@ -570,8 +568,8 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 			       " this entry\n");
 			return -ENODEV;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] /
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] /
 		    10000 && !ignore_cis_vcc) {
 			PDEBUG(DEBUG_EXTRA, "  Vcc (default) mismatch "
 			       "- skipping this entry\n");
@@ -581,11 +579,11 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp = cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-		p_dev->conf.Vpp = cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
+		p_dev->conf.Vpp = dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
-	if (cfg->irq.IRQInfo1 || cfg_mem->dflt.irq.IRQInfo1)
+	if (cfg->irq.IRQInfo1 || dflt->irq.IRQInfo1)
 		p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 	else if (!(p_dev->conf.Attributes & CONF_ENABLE_IRQ)) {
 		/* At least Compaq WL200 does not have IRQInfo1 set,
@@ -597,11 +595,11 @@ static int prism2_config_check(struct pcmcia_device *p_dev,
 
 	/* IO window settings */
 	PDEBUG(DEBUG_EXTRA, "IO window settings: cfg->io.nwin=%d "
-	       "cfg_mem->dflt.io.nwin=%d\n",
-	       cfg->io.nwin, cfg_mem->dflt.io.nwin);
+	       "dflt->io.nwin=%d\n",
+	       cfg->io.nwin, dflt->io.nwin);
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		PDEBUG(DEBUG_EXTRA, "io->flags = 0x%04X, "
 		       "io.base=0x%04x, len=%d\n", io->flags,
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 67a172dfb2d..8a367f96db3 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -165,18 +165,16 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
 	} while (0)
 
 struct orinoco_cs_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 				   cistpl_cftable_entry_t *cfg,
+				   cistpl_cftable_entry_t *dflt,
 				   void *priv_data)
 {
 	struct orinoco_cs_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
 
@@ -188,9 +186,9 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -199,17 +197,17 @@ static int orinoco_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
-			cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 7536aa91dad..e28878dfaba 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -634,18 +634,16 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
  */
 
 struct spectrum_cs_config_data {
-	cistpl_cftable_entry_t dflt;
 	config_info_t conf;
 };
 
 static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 				    cistpl_cftable_entry_t *cfg,
+				    cistpl_cftable_entry_t *dflt,
 				    void *priv_data)
 {
 	struct spectrum_cs_config_data *cfg_mem = priv_data;
 
-	if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
-		cfg_mem->dflt = *cfg;
 	if (cfg->index == 0)
 		goto next_entry;
 
@@ -657,9 +655,9 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
-	} else if (cfg_mem->dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
-		if (cfg_mem->conf.Vcc != cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
-			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, cfg_mem->dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+	} else if (dflt->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+		if (cfg_mem->conf.Vcc != dflt->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+			DEBUG(2, "spectrum_cs_config: Vcc mismatch (cfg_mem->conf.Vcc = %d, CIS = %d)\n",  cfg_mem->conf.Vcc, dflt->vcc.param[CISTPL_POWER_VNOM] / 10000);
 			if (!ignore_cis_vcc)
 				goto next_entry;
 		}
@@ -668,17 +666,17 @@ static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
 	if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
 			cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
-	else if (cfg_mem->dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+	else if (dflt->vpp1.present & (1 << CISTPL_POWER_VNOM))
 		p_dev->conf.Vpp =
-			cfg_mem->dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+			dflt->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 	/* Do we need to allocate an interrupt? */
 	p_dev->conf.Attributes |= CONF_ENABLE_IRQ;
 
 	/* IO window settings */
 	p_dev->io.NumPorts1 = p_dev->io.NumPorts2 = 0;
-	if ((cfg->io.nwin > 0) || (cfg_mem->dflt.io.nwin > 0)) {
-		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &cfg_mem->dflt.io;
+	if ((cfg->io.nwin > 0) || (dflt->io.nwin > 0)) {
+		cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt->io;
 		p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
 		if (!(io->flags & CISTPL_IO_8BIT))
 			p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_16;