diff options
author | Johannes Berg <johannes.berg@intel.com> | 2013-05-17 10:36:29 +0200 |
---|---|---|
committer | Johannes Berg <johannes.berg@intel.com> | 2013-05-27 13:11:42 +0200 |
commit | 0d8877a10d65f3c9bb84ad150e524d95ebd377fb (patch) | |
tree | 628329246e509f0a574b0fa017f2f55489e1b4c9 /drivers/net/wireless | |
parent | ee4d5471333c323693f79cdb7b145b40e12baa77 (diff) |
iwlwifi: move some configuration parameters into DVM
There are a number of parameters that aren't really hardware
specific but rather define how the DVM firmware is used.
Move these into the DVM configuration.
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Diffstat (limited to 'drivers/net/wireless')
20 files changed, 217 insertions, 187 deletions
diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index ff47fce6c58..df64a546f52 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -78,10 +78,13 @@ /* device operations */ extern struct iwl_dvm_cfg iwl_dvm_1000_cfg; extern struct iwl_dvm_cfg iwl_dvm_2000_cfg; +extern struct iwl_dvm_cfg iwl_dvm_105_cfg; extern struct iwl_dvm_cfg iwl_dvm_2030_cfg; extern struct iwl_dvm_cfg iwl_dvm_5000_cfg; extern struct iwl_dvm_cfg iwl_dvm_5150_cfg; extern struct iwl_dvm_cfg iwl_dvm_6000_cfg; +extern struct iwl_dvm_cfg iwl_dvm_6005_cfg; +extern struct iwl_dvm_cfg iwl_dvm_6050_cfg; extern struct iwl_dvm_cfg iwl_dvm_6030_cfg; @@ -291,8 +294,8 @@ void iwlagn_bt_adjust_rssi_monitor(struct iwl_priv *priv, bool rssi_ena); static inline bool iwl_advanced_bt_coexist(struct iwl_priv *priv) { - return priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist; + return priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist; } #ifdef CONFIG_IWLWIFI_DEBUG diff --git a/drivers/net/wireless/iwlwifi/dvm/calib.c b/drivers/net/wireless/iwlwifi/dvm/calib.c index d6c4cf2ad7c..1b0f0d50256 100644 --- a/drivers/net/wireless/iwlwifi/dvm/calib.c +++ b/drivers/net/wireless/iwlwifi/dvm/calib.c @@ -521,7 +521,7 @@ static int iwl_enhance_sensitivity_write(struct iwl_priv *priv) iwl_prepare_legacy_sensitivity_tbl(priv, data, &cmd.enhance_table[0]); - if (priv->cfg->base_params->hd_v2) { + if (priv->lib->hd_v2) { cmd.enhance_table[HD_INA_NON_SQUARE_DET_OFDM_INDEX] = HD_INA_NON_SQUARE_DET_OFDM_DATA_V2; cmd.enhance_table[HD_INA_NON_SQUARE_DET_CCK_INDEX] = @@ -895,7 +895,7 @@ static void iwlagn_gain_computation(struct iwl_priv *priv, continue; } - delta_g = (priv->cfg->base_params->chain_noise_scale * + delta_g = (priv->lib->chain_noise_scale * ((s32)average_noise[default_chain] - (s32)average_noise[i])) / 1500; @@ -1051,8 +1051,8 @@ void iwl_chain_noise_calibration(struct iwl_priv *priv) return; /* Analyze signal for disconnected antenna */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { /* Disable disconnected antenna algorithm for advanced bt coex, assuming valid antennas are connected */ data->active_chains = priv->nvm_data->valid_rx_ant; diff --git a/drivers/net/wireless/iwlwifi/dvm/dev.h b/drivers/net/wireless/iwlwifi/dvm/dev.h index beb525cb907..f1b8df16dbb 100644 --- a/drivers/net/wireless/iwlwifi/dvm/dev.h +++ b/drivers/net/wireless/iwlwifi/dvm/dev.h @@ -568,16 +568,61 @@ struct iwl_hw_params { const struct iwl_sensitivity_ranges *sens; }; +/** + * struct iwl_dvm_bt_params - DVM specific BT (coex) parameters + * @advanced_bt_coexist: support advanced bt coexist + * @bt_init_traffic_load: specify initial bt traffic load + * @bt_prio_boost: default bt priority boost value + * @agg_time_limit: maximum number of uSec in aggregation + * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode + */ +struct iwl_dvm_bt_params { + bool advanced_bt_coexist; + u8 bt_init_traffic_load; + u32 bt_prio_boost; + u16 agg_time_limit; + bool bt_sco_disable; + bool bt_session_2; +}; + +/** + * struct iwl_dvm_cfg - DVM firmware specific device configuration + * @set_hw_params: set hardware parameters + * @set_channel_switch: send channel switch command + * @nic_config: apply device specific configuration + * @temperature: read temperature + * @adv_thermal_throttle: support advance thermal throttle + * @support_ct_kill_exit: support ct kill exit condition + * @plcp_delta_threshold: plcp error rate threshold used to trigger + * radio tuning when there is a high receiving plcp error rate + * @chain_noise_scale: default chain noise scale used for gain computation + * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up + * @no_idle_support: do not support idle mode + * @bt_params: pointer to BT parameters + * @need_temp_offset_calib: need to perform temperature offset calibration + * @no_xtal_calib: some devices do not need crystal calibration data, + * don't send it to those + * @temp_offset_v2: support v2 of temperature offset calibration + * @adv_pm: advanced power management + */ struct iwl_dvm_cfg { - /* set hw dependent parameters */ void (*set_hw_params)(struct iwl_priv *priv); int (*set_channel_switch)(struct iwl_priv *priv, struct ieee80211_channel_switch *ch_switch); - /* device specific configuration */ void (*nic_config)(struct iwl_priv *priv); - - /* temperature */ void (*temperature)(struct iwl_priv *priv); + + const struct iwl_dvm_bt_params *bt_params; + s32 chain_noise_scale; + u8 plcp_delta_threshold; + bool adv_thermal_throttle; + bool support_ct_kill_exit; + bool hd_v2; + bool no_idle_support; + bool need_temp_offset_calib; + bool no_xtal_calib; + bool temp_offset_v2; + bool adv_pm; }; struct iwl_wipan_noa_data { diff --git a/drivers/net/wireless/iwlwifi/dvm/devices.c b/drivers/net/wireless/iwlwifi/dvm/devices.c index 5878bbbfc3d..5a1c2186ea3 100644 --- a/drivers/net/wireless/iwlwifi/dvm/devices.c +++ b/drivers/net/wireless/iwlwifi/dvm/devices.c @@ -178,6 +178,9 @@ struct iwl_dvm_cfg iwl_dvm_1000_cfg = { .set_hw_params = iwl1000_hw_set_hw_params, .nic_config = iwl1000_nic_config, .temperature = iwlagn_temperature, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, + .chain_noise_scale = 1000, }; @@ -236,12 +239,52 @@ struct iwl_dvm_cfg iwl_dvm_2000_cfg = { .set_hw_params = iwl2000_hw_set_hw_params, .nic_config = iwl2000_nic_config, .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .hd_v2 = true, + .need_temp_offset_calib = true, + .temp_offset_v2 = true, +}; + +struct iwl_dvm_cfg iwl_dvm_105_cfg = { + .set_hw_params = iwl2000_hw_set_hw_params, + .nic_config = iwl2000_nic_config, + .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .hd_v2 = true, + .need_temp_offset_calib = true, + .temp_offset_v2 = true, + .adv_pm = true, +}; + +static const struct iwl_dvm_bt_params iwl2030_bt_params = { + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .advanced_bt_coexist = true, + .agg_time_limit = BT_AGG_THRESHOLD_DEF, + .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, + .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT32, + .bt_sco_disable = true, + .bt_session_2 = true, }; struct iwl_dvm_cfg iwl_dvm_2030_cfg = { .set_hw_params = iwl2000_hw_set_hw_params, .nic_config = iwl2000_nic_config, .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .hd_v2 = true, + .bt_params = &iwl2030_bt_params, + .need_temp_offset_calib = true, + .temp_offset_v2 = true, + .adv_pm = true, }; /* @@ -424,12 +467,19 @@ struct iwl_dvm_cfg iwl_dvm_5000_cfg = { .set_hw_params = iwl5000_hw_set_hw_params, .set_channel_switch = iwl5000_hw_channel_switch, .temperature = iwlagn_temperature, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .no_idle_support = true, }; struct iwl_dvm_cfg iwl_dvm_5150_cfg = { .set_hw_params = iwl5150_hw_set_hw_params, .set_channel_switch = iwl5000_hw_channel_switch, .temperature = iwl5150_temperature, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .no_idle_support = true, + .no_xtal_calib = true, }; @@ -589,6 +639,42 @@ struct iwl_dvm_cfg iwl_dvm_6000_cfg = { .set_channel_switch = iwl6000_hw_channel_switch, .nic_config = iwl6000_nic_config, .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, +}; + +const struct iwl_dvm_cfg iwl_dvm_6005_cfg = { + .set_hw_params = iwl6000_hw_set_hw_params, + .set_channel_switch = iwl6000_hw_channel_switch, + .nic_config = iwl6000_nic_config, + .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .need_temp_offset_calib = true, +}; + +struct iwl_dvm_cfg iwl_dvm_6050_cfg = { + .set_hw_params = iwl6000_hw_set_hw_params, + .set_channel_switch = iwl6000_hw_channel_switch, + .nic_config = iwl6000_nic_config, + .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1500, +}; + +static const struct iwl_dvm_bt_params iwl6000_bt_params = { + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .advanced_bt_coexist = true, + .agg_time_limit = BT_AGG_THRESHOLD_DEF, + .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, + .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, + .bt_sco_disable = true, }; struct iwl_dvm_cfg iwl_dvm_6030_cfg = { @@ -596,4 +682,11 @@ struct iwl_dvm_cfg iwl_dvm_6030_cfg = { .set_channel_switch = iwl6000_hw_channel_switch, .nic_config = iwl6000_nic_config, .temperature = iwlagn_temperature, + .adv_thermal_throttle = true, + .support_ct_kill_exit = true, + .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, + .chain_noise_scale = 1000, + .bt_params = &iwl6000_bt_params, + .need_temp_offset_calib = true, + .adv_pm = true, }; diff --git a/drivers/net/wireless/iwlwifi/dvm/lib.c b/drivers/net/wireless/iwlwifi/dvm/lib.c index 54f553380aa..9879550a0fe 100644 --- a/drivers/net/wireless/iwlwifi/dvm/lib.c +++ b/drivers/net/wireless/iwlwifi/dvm/lib.c @@ -254,23 +254,23 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv) BUILD_BUG_ON(sizeof(iwlagn_def_3w_lookup) != sizeof(basic.bt3_lookup_table)); - if (priv->cfg->bt_params) { + if (priv->lib->bt_params) { /* * newer generation of devices (2000 series and newer) * use the version 2 of the bt command * we need to make sure sending the host command * with correct data structure to avoid uCode assert */ - if (priv->cfg->bt_params->bt_session_2) { + if (priv->lib->bt_params->bt_session_2) { bt_cmd_v2.prio_boost = cpu_to_le32( - priv->cfg->bt_params->bt_prio_boost); + priv->lib->bt_params->bt_prio_boost); bt_cmd_v2.tx_prio_boost = 0; bt_cmd_v2.rx_prio_boost = 0; } else { /* older version only has 8 bits */ - WARN_ON(priv->cfg->bt_params->bt_prio_boost & ~0xFF); + WARN_ON(priv->lib->bt_params->bt_prio_boost & ~0xFF); bt_cmd_v1.prio_boost = - priv->cfg->bt_params->bt_prio_boost; + priv->lib->bt_params->bt_prio_boost; bt_cmd_v1.tx_prio_boost = 0; bt_cmd_v1.rx_prio_boost = 0; } @@ -330,7 +330,7 @@ void iwlagn_send_advance_bt_config(struct iwl_priv *priv) priv->bt_full_concurrent ? "full concurrency" : "3-wire"); - if (priv->cfg->bt_params->bt_session_2) { + if (priv->lib->bt_params->bt_session_2) { memcpy(&bt_cmd_v2.basic, &basic, sizeof(basic)); ret = iwl_dvm_send_cmd_pdu(priv, REPLY_BT_CONFIG, @@ -758,8 +758,8 @@ static bool is_single_rx_stream(struct iwl_priv *priv) */ static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) { - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist && (priv->bt_full_concurrent || priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { /* @@ -830,8 +830,8 @@ void iwlagn_set_rxon_chain(struct iwl_priv *priv, struct iwl_rxon_context *ctx) else active_chains = priv->nvm_data->valid_rx_ant; - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist && (priv->bt_full_concurrent || priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH)) { /* diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 700215324af..ac7ed3f809a 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -1284,8 +1284,8 @@ static void iwlagn_mac_rssi_callback(struct ieee80211_hw *hw, IWL_DEBUG_MAC80211(priv, "enter\n"); mutex_lock(&priv->mutex); - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { if (rssi_event == RSSI_EVENT_LOW) priv->bt_enable_pspoll = true; else if (rssi_event == RSSI_EVENT_HIGH) @@ -1395,7 +1395,7 @@ static int iwl_setup_interface(struct iwl_priv *priv, return err; } - if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist && + if (priv->lib->bt_params && priv->lib->bt_params->advanced_bt_coexist && vif->type == NL80211_IFTYPE_ADHOC) { /* * pretend to have high BT traffic as long as we diff --git a/drivers/net/wireless/iwlwifi/dvm/main.c b/drivers/net/wireless/iwlwifi/dvm/main.c index 0c77222c2c6..68f75465957 100644 --- a/drivers/net/wireless/iwlwifi/dvm/main.c +++ b/drivers/net/wireless/iwlwifi/dvm/main.c @@ -615,7 +615,7 @@ static void iwl_rf_kill_ct_config(struct iwl_priv *priv) priv->thermal_throttle.ct_kill_toggle = false; - if (priv->cfg->base_params->support_ct_kill_exit) { + if (priv->lib->support_ct_kill_exit) { adv_cmd.critical_temperature_enter = cpu_to_le32(priv->hw_params.ct_kill_threshold); adv_cmd.critical_temperature_exit = @@ -732,10 +732,10 @@ int iwl_alive_start(struct iwl_priv *priv) } /* download priority table before any calibration request */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { /* Configure Bluetooth device coexistence support */ - if (priv->cfg->bt_params->bt_sco_disable) + if (priv->lib->bt_params->bt_sco_disable) priv->bt_enable_pspoll = false; else priv->bt_enable_pspoll = true; @@ -873,9 +873,9 @@ void iwl_down(struct iwl_priv *priv) priv->bt_status = 0; priv->cur_rssi_ctx = NULL; priv->bt_is_sco = 0; - if (priv->cfg->bt_params) + if (priv->lib->bt_params) priv->bt_traffic_load = - priv->cfg->bt_params->bt_init_traffic_load; + priv->lib->bt_params->bt_init_traffic_load; else priv->bt_traffic_load = 0; priv->bt_full_concurrent = false; @@ -1058,7 +1058,7 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) iwl_setup_scan_deferred_work(priv); - if (priv->cfg->bt_params) + if (priv->lib->bt_params) iwlagn_bt_setup_deferred_work(priv); init_timer(&priv->statistics_periodic); @@ -1072,7 +1072,7 @@ static void iwl_setup_deferred_work(struct iwl_priv *priv) void iwl_cancel_deferred_work(struct iwl_priv *priv) { - if (priv->cfg->bt_params) + if (priv->lib->bt_params) iwlagn_bt_cancel_deferred_work(priv); cancel_work_sync(&priv->run_time_calib_work); @@ -1098,8 +1098,7 @@ static int iwl_init_drv(struct iwl_priv *priv) priv->band = IEEE80211_BAND_2GHZ; - priv->plcp_delta_threshold = - priv->cfg->base_params->plcp_delta_threshold; + priv->plcp_delta_threshold = priv->lib->plcp_delta_threshold; priv->iw_mode = NL80211_IFTYPE_STATION; priv->current_ht_config.smps = IEEE80211_SMPS_STATIC; @@ -1116,8 +1115,8 @@ static int iwl_init_drv(struct iwl_priv *priv) iwl_init_scan_params(priv); /* init bt coex */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { priv->kill_ack_mask = IWLAGN_BT_KILL_ACK_MASK_DEFAULT; priv->kill_cts_mask = IWLAGN_BT_KILL_CTS_MASK_DEFAULT; priv->bt_valid = IWLAGN_BT_ALL_VALID_MSK; @@ -1267,9 +1266,11 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, priv->lib = &iwl_dvm_1000_cfg; break; case IWL_DEVICE_FAMILY_2000: - case IWL_DEVICE_FAMILY_105: priv->lib = &iwl_dvm_2000_cfg; break; + case IWL_DEVICE_FAMILY_105: + priv->lib = &iwl_dvm_105_cfg; + break; case IWL_DEVICE_FAMILY_2030: case IWL_DEVICE_FAMILY_135: priv->lib = &iwl_dvm_2030_cfg; @@ -1281,11 +1282,15 @@ static struct iwl_op_mode *iwl_op_mode_dvm_start(struct iwl_trans *trans, priv->lib = &iwl_dvm_5150_cfg; break; case IWL_DEVICE_FAMILY_6000: - case IWL_DEVICE_FAMILY_6005: case IWL_DEVICE_FAMILY_6000i: + priv->lib = &iwl_dvm_6000_cfg; + break; + case IWL_DEVICE_FAMILY_6005: + priv->lib = &iwl_dvm_6005_cfg; + break; case IWL_DEVICE_FAMILY_6050: case IWL_DEVICE_FAMILY_6150: - priv->lib = &iwl_dvm_6000_cfg; + priv->lib = &iwl_dvm_6050_cfg; break; case IWL_DEVICE_FAMILY_6030: priv->lib = &iwl_dvm_6030_cfg; diff --git a/drivers/net/wireless/iwlwifi/dvm/power.c b/drivers/net/wireless/iwlwifi/dvm/power.c index bd69018d07a..77cb5971223 100644 --- a/drivers/net/wireless/iwlwifi/dvm/power.c +++ b/drivers/net/wireless/iwlwifi/dvm/power.c @@ -163,7 +163,7 @@ static void iwl_static_sleep_cmd(struct iwl_priv *priv, u8 skip; u32 slp_itrvl; - if (priv->cfg->adv_pm) { + if (priv->lib->adv_pm) { table = apm_range_2; if (period <= IWL_DTIM_RANGE_1_MAX) table = apm_range_1; @@ -217,7 +217,7 @@ static void iwl_static_sleep_cmd(struct iwl_priv *priv, cmd->flags &= ~IWL_POWER_SHADOW_REG_ENA; if (iwl_advanced_bt_coexist(priv)) { - if (!priv->cfg->bt_params->bt_sco_disable) + if (!priv->lib->bt_params->bt_sco_disable) cmd->flags |= IWL_POWER_BT_SCO_ENA; else cmd->flags &= ~IWL_POWER_BT_SCO_ENA; @@ -293,7 +293,7 @@ static void iwl_power_build_cmd(struct iwl_priv *priv, if (priv->wowlan) iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, dtimper); - else if (!priv->cfg->base_params->no_idle_support && + else if (!priv->lib->no_idle_support && priv->hw->conf.flags & IEEE80211_CONF_IDLE) iwl_static_sleep_cmd(priv, cmd, IWL_POWER_INDEX_5, 20); else if (iwl_tt_is_low_power_state(priv)) { diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index 907bd6e50aa..94314a8e102 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1088,7 +1088,7 @@ done: (priv->tm_fixed_rate != lq_sta->dbg_fixed_rate)) rs_program_fix_rate(priv, lq_sta); #endif - if (priv->cfg->bt_params && priv->cfg->bt_params->advanced_bt_coexist) + if (priv->lib->bt_params && priv->lib->bt_params->advanced_bt_coexist) rs_bt_update_lq(priv, ctx, lq_sta); } @@ -3064,11 +3064,11 @@ static void rs_fill_link_cmd(struct iwl_priv *priv, * overwrite if needed, pass aggregation time limit * to uCode in uSec */ - if (priv && priv->cfg->bt_params && - priv->cfg->bt_params->agg_time_limit && + if (priv && priv->lib->bt_params && + priv->lib->bt_params->agg_time_limit && priv->bt_traffic_load >= IWL_BT_COEX_TRAFFIC_LOAD_HIGH) lq_cmd->agg_params.agg_time_limit = - cpu_to_le16(priv->cfg->bt_params->agg_time_limit); + cpu_to_le16(priv->lib->bt_params->agg_time_limit); } static void *rs_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) diff --git a/drivers/net/wireless/iwlwifi/dvm/rx.c b/drivers/net/wireless/iwlwifi/dvm/rx.c index a4eed2055fd..2f3fd160ab4 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rx.c +++ b/drivers/net/wireless/iwlwifi/dvm/rx.c @@ -1102,7 +1102,7 @@ void iwl_setup_rx_handlers(struct iwl_priv *priv) iwl_notification_wait_init(&priv->notif_wait); /* Set up BT Rx handlers */ - if (priv->cfg->bt_params) + if (priv->lib->bt_params) iwlagn_bt_rx_handler_setup(priv); } diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c index d69b5586671..8c686a5b90a 100644 --- a/drivers/net/wireless/iwlwifi/dvm/scan.c +++ b/drivers/net/wireless/iwlwifi/dvm/scan.c @@ -801,8 +801,8 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) * Internal scans are passive, so we can indiscriminately set * the BT ignore flag on 2.4 GHz since it applies to TX only. */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) scan->tx_cmd.tx_flags |= TX_CMD_FLG_IGNORE_BT; break; case IEEE80211_BAND_5GHZ: @@ -844,8 +844,8 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) band = priv->scan_band; if (band == IEEE80211_BAND_2GHZ && - priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { /* transmit 2.4 GHz probes only on first antenna */ scan_tx_antennas = first_antenna(scan_tx_antennas); } @@ -873,8 +873,8 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif) rx_ant = first_antenna(active_chains); } - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist && priv->bt_full_concurrent) { /* operated as 1x1 in full concurrency mode */ rx_ant = first_antenna(rx_ant); diff --git a/drivers/net/wireless/iwlwifi/dvm/tt.c b/drivers/net/wireless/iwlwifi/dvm/tt.c index 03f9bc01c0c..fbeee081ee2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tt.c +++ b/drivers/net/wireless/iwlwifi/dvm/tt.c @@ -627,7 +627,7 @@ void iwl_tt_initialize(struct iwl_priv *priv) INIT_WORK(&priv->ct_enter, iwl_bg_ct_enter); INIT_WORK(&priv->ct_exit, iwl_bg_ct_exit); - if (priv->cfg->base_params->adv_thermal_throttle) { + if (priv->lib->adv_thermal_throttle) { IWL_DEBUG_TEMP(priv, "Advanced Thermal Throttling\n"); tt->restriction = kcalloc(IWL_TI_STATE_MAX, sizeof(struct iwl_tt_restriction), diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index a900aaf4779..353a053b4eb 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -83,8 +83,8 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, else if (ieee80211_is_back_req(fc)) tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK; else if (info->band == IEEE80211_BAND_2GHZ && - priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && + priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist && (ieee80211_is_auth(fc) || ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc) || skb->protocol == cpu_to_be16(ETH_P_PAE))) @@ -202,8 +202,8 @@ static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv, rate_flags |= RATE_MCS_CCK_MSK; /* Set up antennas */ - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist && + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist && priv->bt_full_concurrent) { /* operated as 1x1 in full concurrency mode */ priv->mgmt_tx_ant = iwl_toggle_tx_ant(priv, priv->mgmt_tx_ant, @@ -986,8 +986,8 @@ static void iwl_rx_reply_tx_agg(struct iwl_priv *priv, * notification again. */ if (tx_resp->bt_kill_count && tx_resp->frame_count == 1 && - priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { IWL_DEBUG_COEX(priv, "receive reply tx w/ bt_kill\n"); } diff --git a/drivers/net/wireless/iwlwifi/dvm/ucode.c b/drivers/net/wireless/iwlwifi/dvm/ucode.c index 0a1cdc5e856..86270b69cd0 100644 --- a/drivers/net/wireless/iwlwifi/dvm/ucode.c +++ b/drivers/net/wireless/iwlwifi/dvm/ucode.c @@ -132,8 +132,8 @@ int iwl_init_alive_start(struct iwl_priv *priv) { int ret; - if (priv->cfg->bt_params && - priv->cfg->bt_params->advanced_bt_coexist) { + if (priv->lib->bt_params && + priv->lib->bt_params->advanced_bt_coexist) { /* * Tell uCode we are ready to perform calibration * need to perform this before any calibration @@ -155,8 +155,8 @@ int iwl_init_alive_start(struct iwl_priv *priv) * temperature offset calibration is only needed for runtime ucode, * so prepare the value now. */ - if (priv->cfg->need_temp_offset_calib) { - if (priv->cfg->temp_offset_v2) + if (priv->lib->need_temp_offset_calib) { + if (priv->lib->temp_offset_v2) return iwl_set_temperature_offset_calib_v2(priv); else return iwl_set_temperature_offset_calib(priv); @@ -277,7 +277,7 @@ static int iwl_alive_notify(struct iwl_priv *priv) if (ret) return ret; - if (!priv->cfg->no_xtal_calib) { + if (!priv->lib->no_xtal_calib) { ret = iwl_set_Xtal_calib(priv); if (ret) return ret; diff --git a/drivers/net/wireless/iwlwifi/iwl-1000.c b/drivers/net/wireless/iwlwifi/iwl-1000.c index c080ae3070b..0d2afe098af 100644 --- a/drivers/net/wireless/iwlwifi/iwl-1000.c +++ b/drivers/net/wireless/iwlwifi/iwl-1000.c @@ -60,9 +60,6 @@ static const struct iwl_base_params iwl1000_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_1000, .shadow_ram_support = false, .led_compensation = 51, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_EXT_LONG_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_WATCHDOG_DISABLED, .max_event_log_size = 128, }; diff --git a/drivers/net/wireless/iwlwifi/iwl-2000.c b/drivers/net/wireless/iwlwifi/iwl-2000.c index a6ddd2f9fba..c727ec7c90a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-2000.c +++ b/drivers/net/wireless/iwlwifi/iwl-2000.c @@ -72,14 +72,9 @@ static const struct iwl_base_params iwl2000_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_2x00, .shadow_ram_support = true, .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_DEF_WD_TIMEOUT, .max_event_log_size = 512, .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ - .hd_v2 = true, }; @@ -90,14 +85,9 @@ static const struct iwl_base_params iwl2030_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_2x00, .shadow_ram_support = true, .led_compensation = 57, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ - .hd_v2 = true, }; static const struct iwl_ht_params iwl2000_ht_params = { @@ -106,16 +96,6 @@ static const struct iwl_ht_params iwl2000_ht_params = { .ht40_bands = BIT(IEEE80211_BAND_2GHZ), }; -static const struct iwl_bt_params iwl2030_bt_params = { - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .advanced_bt_coexist = true, - .agg_time_limit = BT_AGG_THRESHOLD_DEF, - .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, - .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT32, - .bt_sco_disable = true, - .bt_session_2 = true, -}; - static const struct iwl_eeprom_params iwl20x0_eeprom_params = { .regulatory_bands = { EEPROM_REG_BAND_1_CHANNELS, @@ -137,12 +117,10 @@ static const struct iwl_eeprom_params iwl20x0_eeprom_params = { .device_family = IWL_DEVICE_FAMILY_2000, \ .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ - .nvm_ver = EEPROM_2000_EEPROM_VERSION, \ - .nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ + .nvm_ver = EEPROM_2000_EEPROM_VERSION, \ + .nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .base_params = &iwl2000_base_params, \ .eeprom_params = &iwl20x0_eeprom_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl2000_2bgn_cfg = { @@ -168,12 +146,8 @@ const struct iwl_cfg iwl2000_2bgn_d_cfg = { .nvm_ver = EEPROM_2000_EEPROM_VERSION, \ .nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .base_params = &iwl2030_base_params, \ - .bt_params = &iwl2030_bt_params, \ .eeprom_params = &iwl20x0_eeprom_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true + .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl2030_2bgn_cfg = { .name = "Intel(R) Centrino(R) Wireless-N 2230 BGN", @@ -193,10 +167,7 @@ const struct iwl_cfg iwl2030_2bgn_cfg = { .nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .base_params = &iwl2000_base_params, \ .eeprom_params = &iwl20x0_eeprom_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true, \ .rx_with_siso_diversity = true const struct iwl_cfg iwl105_bgn_cfg = { @@ -222,12 +193,8 @@ const struct iwl_cfg iwl105_bgn_d_cfg = { .nvm_ver = EEPROM_2000_EEPROM_VERSION, \ .nvm_calib_ver = EEPROM_2000_TX_POWER_VERSION, \ .base_params = &iwl2030_base_params, \ - .bt_params = &iwl2030_bt_params, \ .eeprom_params = &iwl20x0_eeprom_params, \ - .need_temp_offset_calib = true, \ - .temp_offset_v2 = true, \ .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true, \ .rx_with_siso_diversity = true const struct iwl_cfg iwl135_bgn_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c index 403f3f224bf..ecc01e1a61a 100644 --- a/drivers/net/wireless/iwlwifi/iwl-5000.c +++ b/drivers/net/wireless/iwlwifi/iwl-5000.c @@ -59,11 +59,8 @@ static const struct iwl_base_params iwl5000_base_params = { .num_of_queues = IWLAGN_NUM_QUEUES, .pll_cfg_val = CSR50_ANA_PLL_CFG_VAL, .led_compensation = 51, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_LONG_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_WATCHDOG_DISABLED, .max_event_log_size = 512, - .no_idle_support = true, }; static const struct iwl_ht_params iwl5000_ht_params = { @@ -159,7 +156,6 @@ const struct iwl_cfg iwl5350_agn_cfg = { .nvm_calib_ver = EEPROM_5050_TX_POWER_VERSION, \ .base_params = &iwl5000_base_params, \ .eeprom_params = &iwl5000_eeprom_params, \ - .no_xtal_calib = true, \ .led_mode = IWL_LED_BLINK, \ .internal_wimax_coex = true diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index b5ab8d1bcac..30d45e2fc19 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -82,10 +82,6 @@ static const struct iwl_base_params iwl6000_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_DEF_WD_TIMEOUT, .max_event_log_size = 512, .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ @@ -98,10 +94,6 @@ static const struct iwl_base_params iwl6050_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_6x50, .shadow_ram_support = true, .led_compensation = 51, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1500, .wd_timeout = IWL_DEF_WD_TIMEOUT, .max_event_log_size = 1024, .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ @@ -114,10 +106,6 @@ static const struct iwl_base_params iwl6000_g2_base_params = { .max_ll_items = OTP_MAX_LL_ITEMS_6x00, .shadow_ram_support = true, .led_compensation = 57, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, .shadow_reg_enable = false, /* TODO: fix bugs using this feature */ @@ -129,15 +117,6 @@ static const struct iwl_ht_params iwl6000_ht_params = { .ht40_bands = BIT(IEEE80211_BAND_2GHZ) | BIT(IEEE80211_BAND_5GHZ), }; -static const struct iwl_bt_params iwl6000_bt_params = { - /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ - .advanced_bt_coexist = true, - .agg_time_limit = BT_AGG_THRESHOLD_DEF, - .bt_init_traffic_load = IWL_BT_COEX_TRAFFIC_LOAD_NONE, - .bt_prio_boost = IWLAGN_BT_PRIO_BOOST_DEFAULT, - .bt_sco_disable = true, -}; - static const struct iwl_eeprom_params iwl6000_eeprom_params = { .regulatory_bands = { EEPROM_REG_BAND_1_CHANNELS, @@ -163,7 +142,6 @@ static const struct iwl_eeprom_params iwl6000_eeprom_params = { .nvm_calib_ver = EEPROM_6005_TX_POWER_VERSION, \ .base_params = &iwl6000_g2_base_params, \ .eeprom_params = &iwl6000_eeprom_params, \ - .need_temp_offset_calib = true, \ .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl6005_2agn_cfg = { @@ -217,11 +195,8 @@ const struct iwl_cfg iwl6005_2agn_mow2_cfg = { .nvm_ver = EEPROM_6030_EEPROM_VERSION, \ .nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ .base_params = &iwl6000_g2_base_params, \ - .bt_params = &iwl6000_bt_params, \ .eeprom_params = &iwl6000_eeprom_params, \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true \ + .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl6030_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6230 AGN", @@ -256,11 +231,8 @@ const struct iwl_cfg iwl6030_2bg_cfg = { .nvm_ver = EEPROM_6030_EEPROM_VERSION, \ .nvm_calib_ver = EEPROM_6030_TX_POWER_VERSION, \ .base_params = &iwl6000_g2_base_params, \ - .bt_params = &iwl6000_bt_params, \ .eeprom_params = &iwl6000_eeprom_params, \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true + .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl6035_2agn_cfg = { .name = "Intel(R) Centrino(R) Advanced-N 6235 AGN", diff --git a/drivers/net/wireless/iwlwifi/iwl-7000.c b/drivers/net/wireless/iwlwifi/iwl-7000.c index c9aae2a2bbb..d4f3b4864ab 100644 --- a/drivers/net/wireless/iwlwifi/iwl-7000.c +++ b/drivers/net/wireless/iwlwifi/iwl-7000.c @@ -96,10 +96,6 @@ static const struct iwl_base_params iwl7000_base_params = { .pll_cfg_val = 0, .shadow_ram_support = true, .led_compensation = 57, - .adv_thermal_throttle = true, - .support_ct_kill_exit = true, - .plcp_delta_threshold = IWL_MAX_PLCP_ERR_THRESHOLD_DEF, - .chain_noise_scale = 1000, .wd_timeout = IWL_LONG_WD_TIMEOUT, .max_event_log_size = 512, .shadow_reg_enable = true, @@ -118,10 +114,7 @@ static const struct iwl_ht_params iwl7000_ht_params = { .max_inst_size = IWL60_RTC_INST_SIZE, \ .max_data_size = IWL60_RTC_DATA_SIZE, \ .base_params = &iwl7000_base_params, \ - /* TODO: .bt_params? */ \ - .need_temp_offset_calib = true, \ - .led_mode = IWL_LED_RF_STATE, \ - .adv_pm = true \ + .led_mode = IWL_LED_RF_STATE const struct iwl_cfg iwl7260_2ac_cfg = { diff --git a/drivers/net/wireless/iwlwifi/iwl-config.h b/drivers/net/wireless/iwlwifi/iwl-config.h index c3c9268affa..a193832fc79 100644 --- a/drivers/net/wireless/iwlwifi/iwl-config.h +++ b/drivers/net/wireless/iwlwifi/iwl-config.h @@ -136,17 +136,9 @@ enum iwl_led_mode { * @led_compensation: compensate on the led on/off time per HW according * to the deviation to achieve the desired led frequency. * The detail algorithm is described in iwl-led.c - * @chain_noise_num_beacons: number of beacons used to compute chain noise - * @adv_thermal_throttle: support advance thermal throttle - * @support_ct_kill_exit: support ct kill exit condition - * @plcp_delta_threshold: plcp error rate threshold used to trigger - * radio tuning when there is a high receiving plcp error rate - * @chain_noise_scale: default chain noise scale used for gain computation * @wd_timeout: TX queues watchdog timeout * @max_event_log_size: size of event log buffer size for ucode event logging * @shadow_reg_enable: HW shadow register support - * @hd_v2: v2 of enhanced sensitivity value, used for 2000 series and up - * @no_idle_support: do not support idle mode */ struct iwl_base_params { int eeprom_size; @@ -157,31 +149,9 @@ struct iwl_base_params { const u16 max_ll_items; const bool shadow_ram_support; u16 led_compensation; - bool adv_thermal_throttle; - bool support_ct_kill_exit; - u8 plcp_delta_threshold; - s32 chain_noise_scale; unsigned int wd_timeout; u32 max_event_log_size; const bool shadow_reg_enable; - const bool hd_v2; - const bool no_idle_support; -}; - -/* - * @advanced_bt_coexist: support advanced bt coexist - * @bt_init_traffic_load: specify initial bt traffic load - * @bt_prio_boost: default bt priority boost value - * @agg_time_limit: maximum number of uSec in aggregation - * @bt_sco_disable: uCode should not response to BT in SCO/ESCO mode - */ -struct iwl_bt_params { - bool advanced_bt_coexist; - u8 bt_init_traffic_load; - u32 bt_prio_boost; - u16 agg_time_limit; - bool bt_sco_disable; - bool bt_session_2; }; /* @@ -231,16 +201,10 @@ struct iwl_eeprom_params { * @nvm_calib_ver: NVM calibration version * @lib: pointer to the lib ops * @base_params: pointer to basic parameters - * @ht_params: point to ht patameters - * @bt_params: pointer to bt parameters - * @need_temp_offset_calib: need to perform temperature offset calibration - * @no_xtal_calib: some devices do not need crystal calibration data, - * don't send it to those + * @ht_params: point to ht parameters * @led_mode: 0=blinking, 1=On(RF On)/Off(RF Off) - * @adv_pm: advance power management * @rx_with_siso_diversity: 1x1 device with rx antenna diversity * @internal_wimax_coex: internal wifi/wimax combo device - * @temp_offset_v2: support v2 of temperature offset calibration * * We enable the driver to be backward compatible wrt. hardware features. * API differences in uCode shouldn't be handled here but through TLVs @@ -264,15 +228,10 @@ struct iwl_cfg { const struct iwl_base_params *base_params; /* params likely to change within a device family */ const struct iwl_ht_params *ht_params; - const struct iwl_bt_params *bt_params; const struct iwl_eeprom_params *eeprom_params; - const bool need_temp_offset_calib; /* if used set to true */ - const bool no_xtal_calib; enum iwl_led_mode led_mode; - const bool adv_pm; const bool rx_with_siso_diversity; const bool internal_wimax_coex; - const bool temp_offset_v2; }; /* |