summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2010-08-15 08:38:38 +0200
committerDominik Brodowski <linux@dominikbrodowski.net>2010-09-29 17:20:25 +0200
commit2262054e74b4b26ed56a8535c1259f6c6c2862a4 (patch)
treefbcd0aa7879408b9676c2df6c7514e5d7428880a /drivers/net/wireless
parent06b3a1d12f41b592972643f8b84015d6c03dc576 (diff)
pcmcia: remove obsolete and wrong comments
What's worse than no comment? A wrong comment. Several PCMCIA device drivers contained the same comments, which were based on how the PCMCIA subsystem worked in the old days of 2.4., and which were originally part of a "dummy_cs" driver. These comments no longer matched at all what is happening now, and therefore should be removed. Tested-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c71
-rw-r--r--drivers/net/wireless/atmel_cs.c69
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c8
-rw-r--r--drivers/net/wireless/libertas/if_cs.c30
-rw-r--r--drivers/net/wireless/orinoco/orinoco_cs.c44
-rw-r--r--drivers/net/wireless/orinoco/spectrum_cs.c44
-rw-r--r--drivers/net/wireless/ray_cs.c35
-rw-r--r--drivers/net/wireless/wl3501_cs.c35
8 files changed, 1 insertions, 335 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index b084278f36b..df2484d4547 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -53,42 +53,15 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the airo_cs
- event handler.
-*/
-
static int airo_config(struct pcmcia_device *link);
static void airo_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void airo_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- airo_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int airo_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -106,15 +79,6 @@ static int airo_probe(struct pcmcia_device *p_dev)
return airo_config(p_dev);
} /* airo_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void airo_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_detach\n");
@@ -129,14 +93,6 @@ static void airo_detach(struct pcmcia_device *link)
kfree(link->priv);
} /* airo_detach */
-/*======================================================================
-
- airo_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
static int airo_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +114,6 @@ static int airo_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
ret = pcmcia_loop_config(link, airo_cs_config_check, NULL);
if (ret)
goto failed;
@@ -179,11 +121,6 @@ static int airo_config(struct pcmcia_device *link)
if (!link->irq)
goto failed;
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -200,14 +137,6 @@ static int airo_config(struct pcmcia_device *link)
return -ENODEV;
} /* airo_config */
-/*======================================================================
-
- After a card is removed, airo_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void airo_release(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "airo_release\n");
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index fabe91a8db2..c96e19da294 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -63,42 +63,15 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
/*====================================================================*/
-/*
- The event() function is this driver's Card Services event handler.
- It will be called by Card Services when an appropriate card status
- event is received. The config() and release() entry points are
- used to configure or release a socket, in response to card
- insertion and ejection events. They are invoked from the atmel_cs
- event handler.
-*/
-
static int atmel_config(struct pcmcia_device *link);
static void atmel_release(struct pcmcia_device *link);
-/*
- The attach() and detach() entry points are used to create and destroy
- "instances" of the driver, where each instance represents everything
- needed to manage one actual PCMCIA card.
-*/
-
static void atmel_detach(struct pcmcia_device *p_dev);
typedef struct local_info_t {
struct net_device *eth_dev;
} local_info_t;
-/*======================================================================
-
- atmel_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
-
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-
- ======================================================================*/
-
static int atmel_probe(struct pcmcia_device *p_dev)
{
local_info_t *local;
@@ -116,15 +89,6 @@ static int atmel_probe(struct pcmcia_device *p_dev)
return atmel_config(p_dev);
} /* atmel_attach */
-/*======================================================================
-
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-
- ======================================================================*/
-
static void atmel_detach(struct pcmcia_device *link)
{
dev_dbg(&link->dev, "atmel_detach\n");
@@ -134,14 +98,6 @@ static void atmel_detach(struct pcmcia_device *link)
kfree(link->priv);
}
-/*======================================================================
-
- atmel_config() is scheduled to run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- device available to the system.
-
- ======================================================================*/
-
/* Call-back function to interrogate PCMCIA-specific information
about the current existance of the card */
static int card_present(void *arg)
@@ -176,18 +132,6 @@ static int atmel_config(struct pcmcia_device *link)
link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_VPP |
CONF_AUTO_AUDIO | CONF_AUTO_SET_IO;
- /*
- In this loop, we scan the CIS for configuration table entries,
- each of which describes a valid card configuration, including
- voltage, IO window, memory window, and interrupt settings.
-
- We make no assumptions about the card to be configured: we use
- just the information available in the CIS. In an ideal world,
- this would work for any PCMCIA card, but it requires a complete
- and accurate CIS. In practice, a driver usually "knows" most of
- these things without consulting the CIS, and most client drivers
- will only use the CIS to fill in implementation-defined details.
- */
if (pcmcia_loop_config(link, atmel_config_check, NULL))
goto failed;
@@ -196,11 +140,6 @@ static int atmel_config(struct pcmcia_device *link)
goto failed;
}
- /*
- This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping, and putting the
- card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -223,14 +162,6 @@ static int atmel_config(struct pcmcia_device *link)
return -ENODEV;
}
-/*======================================================================
-
- After a card is removed, atmel_release() will unregister the
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-
- ======================================================================*/
-
static void atmel_release(struct pcmcia_device *link)
{
struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index ba645701179..bd8a4134ede 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -466,9 +466,6 @@ static void prism2_detach(struct pcmcia_device *link)
}
-/* run after a CARD_INSERTION event is received to configure the PCMCIA
- * socket and make the device available to the system */
-
static int prism2_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -530,11 +527,6 @@ static int prism2_config(struct pcmcia_device *link)
if (ret)
goto failed_unlock;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed_unlock;
diff --git a/drivers/net/wireless/libertas/if_cs.c b/drivers/net/wireless/libertas/if_cs.c
index c2bd2f0304b..ff1280f4133 100644
--- a/drivers/net/wireless/libertas/if_cs.c
+++ b/drivers/net/wireless/libertas/if_cs.c
@@ -760,15 +760,6 @@ static int if_cs_host_to_card(struct lbs_private *priv,
}
-/********************************************************************/
-/* Card Services */
-/********************************************************************/
-
-/*
- * After a card is removed, if_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void if_cs_release(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
@@ -784,16 +775,6 @@ static void if_cs_release(struct pcmcia_device *p_dev)
}
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event.
- */
-
static int if_cs_ioprobe(struct pcmcia_device *p_dev, void *priv_data)
{
p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
@@ -849,11 +830,6 @@ static int if_cs_probe(struct pcmcia_device *p_dev)
goto out1;
}
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(p_dev);
if (ret) {
lbs_pr_err("error in pcmcia_enable_device\n");
@@ -950,12 +926,6 @@ out:
}
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void if_cs_detach(struct pcmcia_device *p_dev)
{
struct if_cs_card *card = p_dev->priv;
diff --git a/drivers/net/wireless/orinoco/orinoco_cs.c b/drivers/net/wireless/orinoco/orinoco_cs.c
index 2b1f554af0b..71b3d68b940 100644
--- a/drivers/net/wireless/orinoco/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco/orinoco_cs.c
@@ -92,14 +92,6 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
orinoco_cs_probe(struct pcmcia_device *link)
{
@@ -119,12 +111,6 @@ orinoco_cs_probe(struct pcmcia_device *link)
return orinoco_cs_config(link);
} /* orinoco_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void orinoco_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -136,12 +122,6 @@ static void orinoco_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* orinoco_cs_detach */
-/*
- * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int orinoco_cs_config_check(struct pcmcia_device *p_dev, void *priv_data)
{
if (p_dev->config_index == 0)
@@ -158,20 +138,6 @@ orinoco_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -199,11 +165,6 @@ orinoco_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -228,11 +189,6 @@ orinoco_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* orinoco_cs_config */
-/*
- * After a card is removed, orinoco_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
orinoco_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/orinoco/spectrum_cs.c b/drivers/net/wireless/orinoco/spectrum_cs.c
index 1314cf204f1..fb859a5ad2e 100644
--- a/drivers/net/wireless/orinoco/spectrum_cs.c
+++ b/drivers/net/wireless/orinoco/spectrum_cs.c
@@ -153,14 +153,6 @@ spectrum_cs_stop_firmware(struct orinoco_private *priv, int idle)
/* PCMCIA stuff */
/********************************************************************/
-/*
- * This creates an "instance" of the driver, allocating local data
- * structures for one device. The device is registered with Card
- * Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a card
- * insertion event. */
static int
spectrum_cs_probe(struct pcmcia_device *link)
{
@@ -181,12 +173,6 @@ spectrum_cs_probe(struct pcmcia_device *link)
return spectrum_cs_config(link);
} /* spectrum_cs_attach */
-/*
- * This deletes a driver "instance". The device is de-registered with
- * Card Services. If it has been released, all local data structures
- * are freed. Otherwise, the structures will be freed when the device
- * is released.
- */
static void spectrum_cs_detach(struct pcmcia_device *link)
{
struct orinoco_private *priv = link->priv;
@@ -198,12 +184,6 @@ static void spectrum_cs_detach(struct pcmcia_device *link)
free_orinocodev(priv);
} /* spectrum_cs_detach */
-/*
- * spectrum_cs_config() is scheduled to run after a CARD_INSERTION
- * event is received, to configure the PCMCIA socket, and to make the
- * device available to the system.
- */
-
static int spectrum_cs_config_check(struct pcmcia_device *p_dev,
void *priv_data)
{
@@ -221,20 +201,6 @@ spectrum_cs_config(struct pcmcia_device *link)
int ret;
void __iomem *mem;
- /*
- * In this loop, we scan the CIS for configuration table
- * entries, each of which describes a valid card
- * configuration, including voltage, IO window, memory window,
- * and interrupt settings.
- *
- * We make no assumptions about the card to be configured: we
- * use just the information available in the CIS. In an ideal
- * world, this would work for any PCMCIA card, but it requires
- * a complete and accurate CIS. In practice, a driver usually
- * "knows" most of these things without consulting the CIS,
- * and most client drivers will only use the CIS to fill in
- * implementation-defined details.
- */
link->config_flags |= CONF_AUTO_SET_VPP | CONF_AUTO_CHECK_VCC |
CONF_AUTO_SET_IO | CONF_ENABLE_IRQ;
if (ignore_cis_vcc)
@@ -263,11 +229,6 @@ spectrum_cs_config(struct pcmcia_device *link)
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
- /*
- * This actually configures the PCMCIA socket -- setting up
- * the I/O windows and the interrupt mapping, and putting the
- * card and host interface into "Memory and IO" mode.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -296,11 +257,6 @@ spectrum_cs_config(struct pcmcia_device *link)
return -ENODEV;
} /* spectrum_cs_config */
-/*
- * After a card is removed, spectrum_cs_release() will unregister the
- * device, and release the PCMCIA configuration. If the device is
- * still open, this will be postponed until it is closed.
- */
static void
spectrum_cs_release(struct pcmcia_device *link)
{
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index b5a2c9e31de..af5b17ce5a1 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -168,13 +168,6 @@ static int bc;
*/
static char *phy_addr = NULL;
-
-/* A struct pcmcia_device structure has fields for most things that are needed
- to keep track of a socket, but there will usually be some device
- specific information that also needs to be kept track of. The
- 'priv' pointer in a struct pcmcia_device structure can be used to point to
- a device-specific private data structure, like this.
-*/
static unsigned int ray_mem_speed = 500;
/* WARNING: THIS DRIVER IS NOT CAPABLE OF HANDLING MULTIPLE DEVICES! */
@@ -289,14 +282,6 @@ static const struct net_device_ops ray_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/*=============================================================================
- ray_attach() creates an "instance" of the driver, allocating
- local data structures for one device. The device is registered
- with Card Services.
- The dev_link structure is initialized, but we don't actually
- configure the card at this point -- we wait until we receive a
- card insertion event.
-=============================================================================*/
static int ray_probe(struct pcmcia_device *p_dev)
{
ray_dev_t *local;
@@ -351,12 +336,6 @@ fail_alloc_dev:
return -ENOMEM;
} /* ray_attach */
-/*=============================================================================
- This deletes a driver "instance". The device is de-registered
- with Card Services. If it has been released, all local data
- structures are freed. Otherwise, the structures will be freed
- when the device is released.
-=============================================================================*/
static void ray_detach(struct pcmcia_device *link)
{
struct net_device *dev;
@@ -379,11 +358,6 @@ static void ray_detach(struct pcmcia_device *link)
dev_dbg(&link->dev, "ray_cs ray_detach ending\n");
} /* ray_detach */
-/*=============================================================================
- ray_config() is run after a CARD_INSERTION event
- is received, to configure the PCMCIA socket, and to make the
- ethernet device available to the system.
-=============================================================================*/
#define MAX_TUPLE_SIZE 128
static int ray_config(struct pcmcia_device *link)
{
@@ -409,9 +383,6 @@ static int ray_config(struct pcmcia_device *link)
goto failed;
dev->irq = link->irq;
- /* This actually configures the PCMCIA socket -- setting up
- the I/O windows and the interrupt mapping.
- */
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -771,11 +742,7 @@ static void join_net(u_long data)
local->card_status = CARD_DOING_ACQ;
}
-/*============================================================================
- After a card is removed, ray_release() will unregister the net
- device, and release the PCMCIA configuration. If the device is
- still open, this will be postponed until it is closed.
-=============================================================================*/
+
static void ray_release(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index d3ed38f558f..ca3f8961fa2 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -77,13 +77,6 @@
#define WL3501_RESUME 0
#define WL3501_SUSPEND 1
-/*
- * The event() function is this driver's Card Services event handler. It will
- * be called by Card Services when an appropriate card status event is
- * received. The config() and release() entry points are used to configure or
- * release a socket, in response to card insertion and ejection events. They
- * are invoked from the wl24 event handler.
- */
static int wl3501_config(struct pcmcia_device *link);
static void wl3501_release(struct pcmcia_device *link);
@@ -1868,15 +1861,6 @@ static const struct net_device_ops wl3501_netdev_ops = {
.ndo_validate_addr = eth_validate_addr,
};
-/**
- * wl3501_attach - creates an "instance" of the driver
- *
- * Creates an "instance" of the driver, allocating local data structures for
- * one device. The device is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually configure the
- * card at this point -- we wait until we receive a card insertion event.
- */
static int wl3501_probe(struct pcmcia_device *p_dev)
{
struct net_device *dev;
@@ -1912,14 +1896,6 @@ out_link:
return -ENOMEM;
}
-/**
- * wl3501_config - configure the PCMCIA socket and make eth device available
- * @link - FILL_IN
- *
- * wl3501_config() is scheduled to run after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet device
- * available to the system.
- */
static int wl3501_config(struct pcmcia_device *link)
{
struct net_device *dev = link->priv;
@@ -1950,9 +1926,6 @@ static int wl3501_config(struct pcmcia_device *link)
if (ret)
goto failed;
- /* This actually configures the PCMCIA socket -- setting up the I/O
- * windows and the interrupt mapping. */
-
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
@@ -2008,14 +1981,6 @@ failed:
return -ENODEV;
}
-/**
- * wl3501_release - unregister the net, release PCMCIA configuration
- * @arg - link
- *
- * After a card is removed, wl3501_release() will unregister the net device,
- * and release the PCMCIA configuration. If the device is still open, this
- * will be postponed until it is closed.
- */
static void wl3501_release(struct pcmcia_device *link)
{
pcmcia_disable_device(link);