summaryrefslogtreecommitdiffstats
path: root/drivers/net/wireless
diff options
context:
space:
mode:
authorDominik Brodowski <linux@dominikbrodowski.net>2005-11-14 21:25:51 +0100
committerDominik Brodowski <linux@dominikbrodowski.net>2006-01-06 00:03:24 +0100
commitf8cfa618dccbdc6dab5297f75779566a388a98fd (patch)
treeb91e0952038dafc6e03bf8b1d8948b1fdefec031 /drivers/net/wireless
parentb463581154f3f3eecda27cae60df813fefcd84d3 (diff)
[PATCH] pcmcia: unify attach, EVENT_CARD_INSERTION handlers into one probe callback
Unify the EVENT_CARD_INSERTION and "attach" callbacks to one unified probe() callback. As all in-kernel drivers are changed to this new callback, there will be no temporary backwards-compatibility. Inside a probe() function, each driver _must_ set struct pcmcia_device *p_dev->instance and instance->handle correctly. With these patches, the basic driver interface for 16-bit PCMCIA drivers now has the classic four callbacks known also from other buses: int (*probe) (struct pcmcia_device *dev); void (*remove) (struct pcmcia_device *dev); int (*suspend) (struct pcmcia_device *dev); int (*resume) (struct pcmcia_device *dev); Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Diffstat (limited to 'drivers/net/wireless')
-rw-r--r--drivers/net/wireless/airo_cs.c74
-rw-r--r--drivers/net/wireless/atmel_cs.c80
-rw-r--r--drivers/net/wireless/hostap/hostap_cs.c55
-rw-r--r--drivers/net/wireless/netwave_cs.c68
-rw-r--r--drivers/net/wireless/orinoco_cs.c58
-rw-r--r--drivers/net/wireless/ray_cs.c68
-rw-r--r--drivers/net/wireless/spectrum_cs.c63
-rw-r--r--drivers/net/wireless/wavelan_cs.c84
-rw-r--r--drivers/net/wireless/wavelan_cs.p.h8
-rw-r--r--drivers/net/wireless/wl3501_cs.c60
10 files changed, 108 insertions, 510 deletions
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index 88805a4c29f..a496460ce22 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -82,8 +82,6 @@ MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
static void airo_config(dev_link_t *link);
static void airo_release(dev_link_t *link);
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -91,7 +89,6 @@ static int airo_event(event_t event, int priority,
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *airo_attach(void);
static void airo_detach(struct pcmcia_device *p_dev);
/*
@@ -102,14 +99,6 @@ static void airo_detach(struct pcmcia_device *p_dev);
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "airo_cs";
-
-/*
A linked list of "instances" of the aironet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -152,20 +141,18 @@ typedef struct local_info_t {
======================================================================*/
-static dev_link_t *airo_attach(void)
+static int airo_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "airo_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
/* Interrupt setup */
@@ -189,23 +176,17 @@ static dev_link_t *airo_attach(void)
if (!local) {
printk(KERN_ERR "airo_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- airo_detach(link->handle);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ airo_config(link);
+
+ return 0;
} /* airo_attach */
/*======================================================================
@@ -497,34 +478,6 @@ static int airo_resume(struct pcmcia_device *p_dev)
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
-
-static int airo_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "airo_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- airo_config(link);
- break;
- }
- return 0;
-} /* airo_event */
-
static struct pcmcia_device_id airo_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x015f, 0x000a),
PCMCIA_DEVICE_MANF_CARD(0x015f, 0x0005),
@@ -539,8 +492,7 @@ static struct pcmcia_driver airo_driver = {
.drv = {
.name = "airo_cs",
},
- .attach = airo_attach,
- .event = airo_event,
+ .probe = airo_attach,
.remove = airo_detach,
.id_table = airo_ids,
.suspend = airo_suspend,
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 32f00970935..d6f4a5a3e55 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -93,8 +93,6 @@ MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
static void atmel_config(dev_link_t *link);
static void atmel_release(dev_link_t *link);
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args);
/*
The attach() and detach() entry points are used to create and destroy
@@ -102,7 +100,6 @@ static int atmel_event(event_t event, int priority,
needed to manage one actual PCMCIA card.
*/
-static dev_link_t *atmel_attach(void);
static void atmel_detach(struct pcmcia_device *p_dev);
/*
@@ -113,14 +110,6 @@ static void atmel_detach(struct pcmcia_device *p_dev);
*/
/*
- The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-
-static dev_info_t dev_info = "atmel_cs";
-
-/*
A linked list of "instances" of the atmelnet device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -163,27 +152,25 @@ typedef struct local_info_t {
======================================================================*/
-static dev_link_t *atmel_attach(void)
+static int atmel_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
local_info_t *local;
- int ret;
-
+
DEBUG(0, "atmel_attach()\n");
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
- return NULL;
+ return -ENOMEM;
}
-
+
/* Interrupt setup */
link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
link->irq.IRQInfo1 = IRQ_LEVEL_ID;
link->irq.Handler = NULL;
-
+
/*
General socket configuration defaults can go here. In this
client, we assume very little, and rely on the CIS for almost
@@ -194,29 +181,23 @@ static dev_link_t *atmel_attach(void)
link->conf.Attributes = 0;
link->conf.Vcc = 50;
link->conf.IntType = INT_MEMORY_AND_IO;
-
+
/* Allocate space for private device-specific data */
local = kzalloc(sizeof(local_info_t), GFP_KERNEL);
if (!local) {
printk(KERN_ERR "atmel_cs: no memory for new device\n");
kfree (link);
- return NULL;
+ return -ENOMEM;
}
link->priv = local;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- atmel_detach(link->handle);
- return NULL;
- }
-
- return link;
+
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ atmel_config(link);
+
+ return 0;
} /* atmel_attach */
/*======================================================================
@@ -485,34 +466,6 @@ static int atmel_resume(struct pcmcia_device *dev)
return 0;
}
-/*======================================================================
-
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received.
-
- When a CARD_REMOVAL event is received, we immediately set a
- private flag to block future accesses to this device. All the
- functions that actually access the device should check this flag
- to make sure the card is still present.
-
- ======================================================================*/
-
-static int atmel_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "atmel_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- atmel_config(link);
- break;
- }
- return 0;
-} /* atmel_event */
-
/*====================================================================*/
/* We use the driver_info field to store the correct firmware type for a card. */
@@ -562,8 +515,7 @@ static struct pcmcia_driver atmel_driver = {
.drv = {
.name = "atmel_cs",
},
- .attach = atmel_attach,
- .event = atmel_event,
+ .probe = atmel_attach,
.remove = atmel_detach,
.id_table = atmel_ids,
.suspend = atmel_suspend,
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 195a5bf3d72..8bc0b528548 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -204,8 +204,7 @@ static int hfa384x_to_bap(struct net_device *dev, u16 bap, void *buf, int len)
static void prism2_detach(struct pcmcia_device *p_dev);
static void prism2_release(u_long arg);
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args);
+static int prism2_config(dev_link_t *link);
static int prism2_pccard_card_present(local_info_t *local)
@@ -502,15 +501,13 @@ static struct prism2_helper_functions prism2_pccard_funcs =
/* allocate local data and register with CardServices
* initialize dev_link structure, but do not configure the card yet */
-static dev_link_t *prism2_attach(void)
+static int prism2_attach(struct pcmcia_device *p_dev)
{
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
link = kmalloc(sizeof(dev_link_t), GFP_KERNEL);
if (link == NULL)
- return NULL;
+ return -ENOMEM;
memset(link, 0, sizeof(dev_link_t));
@@ -518,18 +515,14 @@ static dev_link_t *prism2_attach(void)
link->conf.Vcc = 33;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* register with CardServices */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- prism2_detach(link->handle);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if (prism2_config(link))
+ PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
+
+ return 0;
}
@@ -878,29 +871,6 @@ static int hostap_cs_resume(struct pcmcia_device *p_dev)
return 0;
}
-static int prism2_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- PDEBUG(DEBUG_EXTRA, "%s: CS_EVENT_CARD_INSERTION\n", dev_info);
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if (prism2_config(link)) {
- PDEBUG(DEBUG_EXTRA, "prism2_config() failed\n");
- }
- break;
-
- default:
- PDEBUG(DEBUG_EXTRA, "%s: prism2_event() - unknown event %d\n",
- dev_info, event);
- break;
- }
- return 0;
-}
-
-
static struct pcmcia_device_id hostap_cs_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7100),
PCMCIA_DEVICE_MANF_CARD(0x000b, 0x7300),
@@ -959,10 +929,9 @@ static struct pcmcia_driver hostap_driver = {
.drv = {
.name = "hostap_cs",
},
- .attach = prism2_attach,
+ .probe = prism2_attach,
.remove = prism2_detach,
.owner = THIS_MODULE,
- .event = prism2_event,
.id_table = hostap_cs_ids,
.suspend = hostap_cs_suspend,
.resume = hostap_cs_resume,
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index af9a32d8d22..bf6271ee387 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -166,8 +166,6 @@ static char *version =
#define DEBUG(n, args...)
#endif
-static dev_info_t dev_info = "netwave_cs";
-
/*====================================================================*/
/* Parameters that can be set with 'insmod' */
@@ -195,11 +193,8 @@ module_param(mem_speed, int, 0);
/* PCMCIA (Card Services) related functions */
static void netwave_release(dev_link_t *link); /* Card removal */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args);
static void netwave_pcmcia_config(dev_link_t *arg); /* Runs after card
insertion */
-static dev_link_t *netwave_attach(void); /* Create instance */
static void netwave_detach(struct pcmcia_device *p_dev); /* Destroy instance */
/* Hardware configuration */
@@ -383,20 +378,18 @@ static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *netwave_attach(void)
+static int netwave_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
netwave_private *priv;
- int ret;
-
+
DEBUG(0, "netwave_attach()\n");
-
+
/* Initialize the dev_link_t structure */
dev = alloc_etherdev(sizeof(netwave_private));
if (!dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
link = &priv->link;
link->priv = dev;
@@ -438,20 +431,14 @@ static dev_link_t *netwave_attach(void)
dev->open = &netwave_open;
dev->stop = &netwave_close;
link->irq.Instance = dev;
-
- /* Register with Card Services */
- link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- cs_error(link->handle, RegisterClient, ret);
- netwave_detach(link->handle);
- return NULL;
- }
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ netwave_pcmcia_config( link);
+
+ return 0;
} /* netwave_attach */
/*
@@ -935,36 +922,6 @@ static int netwave_resume(struct pcmcia_device *p_dev)
/*
- * Function netwave_event (event, priority, args)
- *
- * The card status event handler. Mostly, this schedules other
- * stuff to run after an event is received. A CARD_REMOVAL event
- * also sets some flags to discourage the net drivers from trying
- * to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag
- * to block future accesses to this device. All the functions that
- * actually access the device should check this flag to make sure
- * the card is still present.
- *
- */
-static int netwave_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- DEBUG(1, "netwave_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- netwave_pcmcia_config( link);
- break;
- }
- return 0;
-} /* netwave_event */
-
-/*
* Function netwave_doreset (ioBase, ramBase)
*
* Proper hardware reset of the card.
@@ -1456,8 +1413,7 @@ static struct pcmcia_driver netwave_driver = {
.drv = {
.name = "netwave_cs",
},
- .attach = netwave_attach,
- .event = netwave_event,
+ .probe = netwave_attach,
.remove = netwave_detach,
.id_table = netwave_ids,
.suspend = netwave_suspend,
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index bfeeef49f0b..b664708481c 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -43,17 +43,6 @@ module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -74,6 +63,7 @@ struct orinoco_pccard {
/* Function prototypes */
/********************************************************************/
+static void orinoco_cs_config(dev_link_t *link);
static void orinoco_cs_release(dev_link_t *link);
static void orinoco_cs_detach(struct pcmcia_device *p_dev);
@@ -113,19 +103,17 @@ orinoco_cs_hard_reset(struct orinoco_private *priv)
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-orinoco_cs_attach(void)
+static int
+orinoco_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -150,18 +138,13 @@ orinoco_cs_attach(void)
/* Register with Card Services */
link->next = NULL;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
+ link->handle = p_dev;
+ p_dev->instance = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- orinoco_cs_detach(link->handle);
- return NULL;
- }
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ orinoco_cs_config(link);
- return link;
+ return 0;
} /* orinoco_cs_attach */
/*
@@ -521,26 +504,6 @@ static int orinoco_cs_resume(struct pcmcia_device *p_dev)
}
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
-static int
-orinoco_cs_event(event_t event, int priority,
- event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- orinoco_cs_config(link);
- break;
- }
-
- return 0;
-} /* orinoco_cs_event */
-
/********************************************************************/
/* Module initialization */
/********************************************************************/
@@ -640,9 +603,8 @@ static struct pcmcia_driver orinoco_driver = {
.drv = {
.name = DRIVER_NAME,
},
- .attach = orinoco_cs_attach,
+ .probe = orinoco_cs_attach,
.remove = orinoco_cs_detach,
- .event = orinoco_cs_event,
.id_table = orinoco_cs_ids,
.suspend = orinoco_cs_suspend,
.resume = orinoco_cs_resume,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index 33a89e29212..319180ca7e7 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -92,8 +92,6 @@ module_param(pc_debug, int, 0);
/** Prototypes based on PCMCIA skeleton driver *******************************/
static void ray_config(dev_link_t *link);
static void ray_release(dev_link_t *link);
-static int ray_event(event_t event, int priority, event_callback_args_t *args);
-static dev_link_t *ray_attach(void);
static void ray_detach(struct pcmcia_device *p_dev);
/***** Prototypes indicated by device structure ******************************/
@@ -192,12 +190,6 @@ static int bc;
static char *phy_addr = NULL;
-/* The dev_info variable is the "key" that is used to match up this
- device driver with appropriate cards, through the card configuration
- database.
-*/
-static dev_info_t dev_info = "ray_cs";
-
/* A linked list of "instances" of the ray device. Each actual
PCMCIA card corresponds to one device instance, and is described
by one dev_link_t structure (defined in ds.h).
@@ -314,12 +306,10 @@ static char rcsid[] = "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.
configure the card at this point -- we wait until we receive a
card insertion event.
=============================================================================*/
-static dev_link_t *ray_attach(void)
+static int ray_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
ray_dev_t *local;
- int ret;
struct net_device *dev;
DEBUG(1, "ray_attach()\n");
@@ -328,7 +318,7 @@ static dev_link_t *ray_attach(void)
link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
if (!link)
- return NULL;
+ return -ENOMEM;
/* Allocate space for private device-specific data */
dev = alloc_etherdev(sizeof(ray_dev_t));
@@ -387,30 +377,19 @@ static dev_link_t *ray_attach(void)
dev->stop = &ray_dev_close;
netif_stop_queue(dev);
- /* Register with Card Services */
- link->next = dev_list;
- dev_list = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
+ init_timer(&local->timer);
- DEBUG(2,"ray_cs ray_attach calling pcmcia_register_client(...)\n");
+ link->handle = p_dev;
+ p_dev->instance = link;
- init_timer(&local->timer);
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ ray_config(link);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != 0) {
- printk("ray_cs ray_attach RegisterClient unhappy - detaching\n");
- cs_error(link->handle, RegisterClient, ret);
- ray_detach(link->handle);
- return NULL;
- }
- DEBUG(2,"ray_cs ray_attach ending\n");
- return link;
+ return 0;
fail_alloc_dev:
kfree(link);
- return NULL;
+ return -ENOMEM;
} /* ray_attach */
/*=============================================================================
This deletes a driver "instance". The device is de-registered
@@ -924,32 +903,6 @@ static int ray_resume(struct pcmcia_device *p_dev)
return 0;
}
-/*=============================================================================
- The card status event handler. Mostly, this schedules other
- stuff to run after an event is received. A CARD_REMOVAL event
- also sets some flags to discourage the net drivers from trying
- to talk to the card any more.
-
- When a CARD_REMOVAL event is received, we immediately set a flag
- to block future accesses to this device. All the functions that
- actually access the device should check this flag to make sure
- the card is still present.
-=============================================================================*/
-static int ray_event(event_t event, int priority,
- event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
- DEBUG(1, "ray_event(0x%06x)\n", event);
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- ray_config(link);
- break;
- }
- return 0;
- DEBUG(2,"ray_event ending\n");
-} /* ray_event */
/*===========================================================================*/
int ray_dev_init(struct net_device *dev)
{
@@ -2945,8 +2898,7 @@ static struct pcmcia_driver ray_driver = {
.drv = {
.name = "ray_cs",
},
- .attach = ray_attach,
- .event = ray_event,
+ .probe = ray_attach,
.remove = ray_detach,
.id_table = ray_ids,
.suspend = ray_suspend,
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 1933250dad1..fee4be1ce81 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -57,17 +57,6 @@ module_param(ignore_cis_vcc, int, 0);
MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
/********************************************************************/
-/* Magic constants */
-/********************************************************************/
-
-/*
- * The dev_info variable is the "key" that is used to match up this
- * device driver with appropriate cards, through the card
- * configuration database.
- */
-static dev_info_t dev_info = DRIVER_NAME;
-
-/********************************************************************/
/* Data structures */
/********************************************************************/
@@ -82,8 +71,8 @@ struct orinoco_pccard {
/* Function prototypes */
/********************************************************************/
+static void spectrum_cs_config(dev_link_t *link);
static void spectrum_cs_release(dev_link_t *link);
-static void spectrum_cs_detach(struct pcmcia_device *p_dev);
/********************************************************************/
/* Firmware downloader */
@@ -594,19 +583,17 @@ spectrum_cs_hard_reset(struct orinoco_private *priv)
* The dev_link structure is initialized, but we don't actually
* configure the card at this point -- we wait until we receive a card
* insertion event. */
-static dev_link_t *
-spectrum_cs_attach(void)
+static int
+spectrum_cs_attach(struct pcmcia_device *p_dev)
{
struct net_device *dev;
struct orinoco_private *priv;
struct orinoco_pccard *card;
dev_link_t *link;
- client_reg_t client_reg;
- int ret;
dev = alloc_orinocodev(sizeof(*card), spectrum_cs_hard_reset);
if (! dev)
- return NULL;
+ return -ENOMEM;
priv = netdev_priv(dev);
card = priv->card;
@@ -628,22 +615,13 @@ spectrum_cs_attach(void)
link->conf.Attributes = 0;
link->conf.IntType = INT_MEMORY_AND_IO;
- /* Register with Card Services */
- /* FIXME: need a lock? */
- link->next = NULL; /* not needed */
+ link->handle = p_dev;
+ p_dev->instance = link;
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210; /* FIXME: what does this mean? */
- client_reg.event_callback_args.client_data = link;
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ spectrum_cs_config(link);
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret != CS_SUCCESS) {
- cs_error(link->handle, RegisterClient, ret);
- spectrum_cs_detach(link->handle);
- return NULL;
- }
-
- return link;
+ return 0;
} /* spectrum_cs_attach */
/*
@@ -977,26 +955,6 @@ spectrum_cs_resume(struct pcmcia_device *p_dev)
return 0;
}
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received.
- */
-static int
-spectrum_cs_event(event_t event, int priority,
- event_callback_args_t * args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- spectrum_cs_config(link);
- break;
-
- }
-
- return 0;
-} /* spectrum_cs_event */
/********************************************************************/
/* Module initialization */
@@ -1021,11 +979,10 @@ static struct pcmcia_driver orinoco_driver = {
.drv = {
.name = DRIVER_NAME,
},
- .attach = spectrum_cs_attach,
+ .probe = spectrum_cs_attach,
.remove = spectrum_cs_detach,
.suspend = spectrum_cs_suspend,
.resume = spectrum_cs_resume,
- .event = spectrum_cs_event,
.id_table = spectrum_cs_ids,
};
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 196e827fc84..7e2039f52c4 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4594,14 +4594,12 @@ wavelan_close(struct net_device * dev)
* configure the card at this point -- we wait until we receive a
* card insertion event.
*/
-static dev_link_t *
-wavelan_attach(void)
+static int
+wavelan_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg; /* Register with cardmgr */
dev_link_t * link; /* Info for cardmgr */
struct net_device * dev; /* Interface generic data */
net_local * lp; /* Interface specific data */
- int ret;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "-> wavelan_attach()\n");
@@ -4609,7 +4607,7 @@ wavelan_attach(void)
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(struct dev_link_t), GFP_KERNEL);
- if (!link) return NULL;
+ if (!link) return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 8;
@@ -4633,7 +4631,7 @@ wavelan_attach(void)
dev = alloc_etherdev(sizeof(net_local));
if (!dev) {
kfree(link);
- return NULL;
+ return -ENOMEM;
}
link->priv = link->irq.Instance = dev;
@@ -4678,28 +4676,21 @@ wavelan_attach(void)
/* Other specific data */
dev->mtu = WAVELAN_MTU;
- /* Register with Card Services */
- client_reg.dev_info = &dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
-
-#ifdef DEBUG_CONFIG_INFO
- printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n");
-#endif
+ link->handle = p_dev;
+ p_dev->instance = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if(ret != 0)
- {
- cs_error(link->handle, RegisterClient, ret);
- wavelan_detach(link->handle);
- return NULL;
- }
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if(wv_pcmcia_config(link) &&
+ wv_hw_config(dev))
+ wv_init_info(dev);
+ else
+ dev->irq = 0;
#ifdef DEBUG_CALLBACK_TRACE
printk(KERN_DEBUG "<- wavelan_attach()\n");
#endif
- return link;
+ return 0;
}
/*------------------------------------------------------------------*/
@@ -4801,52 +4792,6 @@ static int wavelan_resume(struct pcmcia_device *p_dev)
}
-/*------------------------------------------------------------------*/
-/*
- * The card status event handler. Mostly, this schedules other stuff
- * to run after an event is received. A CARD_REMOVAL event also sets
- * some flags to discourage the net drivers from trying to talk to the
- * card any more.
- */
-static int
-wavelan_event(event_t event, /* The event received */
- int priority,
- event_callback_args_t * args)
-{
- dev_link_t * link = (dev_link_t *) args->client_data;
- struct net_device * dev = (struct net_device *) link->priv;
-
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "->wavelan_event(): %s\n",
- ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" :
- ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" :
- ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" :
- ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" :
- ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" :
- ((event == CS_EVENT_PM_RESUME) ? "pm resume" :
- ((event == CS_EVENT_CARD_RESET) ? "card reset" :
- "unknown"))))))));
-#endif
-
- switch(event)
- {
- case CS_EVENT_CARD_INSERTION:
- /* Reset and configure the card */
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- if(wv_pcmcia_config(link) &&
- wv_hw_config(dev))
- wv_init_info(dev);
- else
- dev->irq = 0;
- break;
- }
-
-#ifdef DEBUG_CALLBACK_TRACE
- printk(KERN_DEBUG "<-wavelan_event()\n");
-#endif
- return 0;
-}
-
static struct pcmcia_device_id wavelan_ids[] = {
PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
@@ -4861,8 +4806,7 @@ static struct pcmcia_driver wavelan_driver = {
.drv = {
.name = "wavelan_cs",
},
- .attach = wavelan_attach,
- .event = wavelan_event,
+ .probe = wavelan_attach,
.remove = wavelan_detach,
.id_table = wavelan_ids,
.suspend = wavelan_suspend,
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
index a1a19177c5c..f2d59756815 100644
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -754,19 +754,11 @@ static void
static int
wavelan_open(struct net_device *), /* Open the device */
wavelan_close(struct net_device *); /* Close the device */
-static dev_link_t *
- wavelan_attach(void); /* Create a new device */
static void
wavelan_detach(struct pcmcia_device *p_dev); /* Destroy a removed device */
-static int
- wavelan_event(event_t, /* Manage pcmcia events */
- int,
- event_callback_args_t *);
/**************************** VARIABLES ****************************/
-static dev_info_t dev_info = "wavelan_cs";
-
/*
* Parameters that can be set with 'insmod'
* The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 21e498fe7b1..48e10b0c7e7 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -105,7 +105,6 @@ module_param(pc_debug, int, 0);
*/
static void wl3501_config(dev_link_t *link);
static void wl3501_release(dev_link_t *link);
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args);
/*
* The dev_info variable is the "key" that is used to match up this
@@ -1954,18 +1953,16 @@ static const struct iw_handler_def wl3501_handler_def = {
* The dev_link structure is initialized, but we don't actually configure the
* card at this point -- we wait until we receive a card insertion event.
*/
-static dev_link_t *wl3501_attach(void)
+static int wl3501_attach(struct pcmcia_device *p_dev)
{
- client_reg_t client_reg;
dev_link_t *link;
struct net_device *dev;
struct wl3501_card *this;
- int ret;
/* Initialize the dev_link_t structure */
link = kzalloc(sizeof(*link), GFP_KERNEL);
if (!link)
- goto out;
+ return -ENOMEM;
/* The io structure describes IO port mapping */
link->io.NumPorts1 = 16;
@@ -2001,24 +1998,17 @@ static dev_link_t *wl3501_attach(void)
netif_stop_queue(dev);
link->priv = link->irq.Instance = dev;
- /* Register with Card Services */
- link->next = wl3501_dev_list;
- wl3501_dev_list = link;
- client_reg.dev_info = &wl3501_dev_info;
- client_reg.Version = 0x0210;
- client_reg.event_callback_args.client_data = link;
- ret = pcmcia_register_client(&link->handle, &client_reg);
- if (ret) {
- cs_error(link->handle, RegisterClient, ret);
- wl3501_detach(link->handle);
- link = NULL;
- }
-out:
- return link;
+ link->handle = p_dev;
+ p_dev->instance = link;
+
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ wl3501_config(link);
+
+ return 0;
out_link:
kfree(link);
link = NULL;
- goto out;
+ return -ENOMEM;
}
#define CS_CHECK(fn, ret) \
@@ -2206,33 +2196,6 @@ static int wl3501_resume(struct pcmcia_device *p_dev)
}
-/**
- * wl3501_event - The card status event handler
- * @event - event
- * @pri - priority
- * @args - arguments for this event
- *
- * The card status event handler. Mostly, this schedules other stuff to run
- * after an event is received. A CARD_REMOVAL event also sets some flags to
- * discourage the net drivers from trying to talk to the card any more.
- *
- * When a CARD_REMOVAL event is received, we immediately set a flag to block
- * future accesses to this device. All the functions that actually access the
- * device should check this flag to make sure the card is still present.
- */
-static int wl3501_event(event_t event, int pri, event_callback_args_t *args)
-{
- dev_link_t *link = args->client_data;
-
- switch (event) {
- case CS_EVENT_CARD_INSERTION:
- link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
- wl3501_config(link);
- break;
- }
- return 0;
-}
-
static struct pcmcia_device_id wl3501_ids[] = {
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0001),
PCMCIA_DEVICE_NULL
@@ -2244,8 +2207,7 @@ static struct pcmcia_driver wl3501_driver = {
.drv = {
.name = "wl3501_cs",
},
- .attach = wl3501_attach,
- .event = wl3501_event,
+ .probe = wl3501_attach,
.remove = wl3501_detach,
.id_table = wl3501_ids,
.suspend = wl3501_suspend,