Merge tag 'v3.3-rc2' into depends/rmk/for-armsoc

There were conflicts between fixes going in after 3.3-rc1 and
Russell's stable arm-soc base branch. Resolving it in the dependency
branch so that each topic branch shares the same resolution.

Conflicts:
	arch/arm/mach-at91/at91cap9.c
	arch/arm/mach-at91/at91sam9g45.c

4 files changed, 19 insertions, 3 deletions

diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index b97a40ed5ff..3876c7ea54f 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -31,6 +31,12 @@ config B43_BCMA
 	depends on B43 && BCMA
 	default y
 
+config B43_BCMA_EXTRA
+	bool "Hardware support that overlaps with the brcmsmac driver"
+	depends on B43_BCMA
+	default n if BRCMSMAC || BRCMSMAC_MODULE
+	default	y
+
 config B43_SSB
 	bool
 	depends on B43 && SSB
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index b91f28ef103..23ffb1b9a86 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -116,8 +116,10 @@ MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO");
 #ifdef CONFIG_B43_BCMA
 static const struct bcma_device_id b43_bcma_tbl[] = {
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x11, BCMA_ANY_CLASS),
+#ifdef CONFIG_B43_BCMA_EXTRA
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x17, BCMA_ANY_CLASS),
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x18, BCMA_ANY_CLASS),
+#endif
 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 0x1D, BCMA_ANY_CLASS),
 	BCMA_CORETABLE_END
 };
diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c
index f7ed34034f8..f6affc6fd12 100644
--- a/drivers/net/wireless/brcm80211/brcmsmac/main.c
+++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c
@@ -7981,13 +7981,21 @@ int brcms_c_get_curband(struct brcms_c_info *wlc)
 
 void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop)
 {
+	int timeout = 20;
+
 	/* flush packet queue when requested */
 	if (drop)
 		brcmu_pktq_flush(&wlc->pkt_queue->q, false, NULL, NULL);
 
 	/* wait for queue and DMA fifos to run dry */
-	while (!pktq_empty(&wlc->pkt_queue->q) || brcms_txpktpendtot(wlc) > 0)
+	while (!pktq_empty(&wlc->pkt_queue->q) || brcms_txpktpendtot(wlc) > 0) {
 		brcms_msleep(wlc->wl, 1);
+
+		if (--timeout == 0)
+			break;
+	}
+
+	WARN_ON_ONCE(timeout == 0);
 }
 
 void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval)
diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
index 752493f0040..65d1f05007b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c
@@ -972,11 +972,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans)
 	}
 #endif
 
-	spin_unlock_irqrestore(&trans->shrd->lock, flags);
-
 	/* saved interrupt in inta variable now we can reset trans_pcie->inta */
 	trans_pcie->inta = 0;
 
+	spin_unlock_irqrestore(&trans->shrd->lock, flags);
+
 	/* Now service all interrupt bits discovered above. */
 	if (inta & CSR_INT_BIT_HW_ERR) {
 		IWL_ERR(trans, "Hardware error detected.  Restarting.\n");