ath6kl: add back beginnings of USB support

John Linville had to revert the part of USB support which was already
in ath6kl due to build problems in commit cb00ec382b ("ath6kl: revert
USB support"). Now that I fixed the build problems properly by adding
ath6kl_core.ko kernel module it's possible to add back the
(incomplete) USB support. This patch is a revert of John's patch and
adds back the USB code which as already in ath6kl, only difference
being minor changes in Makefile and adapting usb.c to new core
function names.

Note that USB support in ath6kl is not complete yet. This code only
makes it possible to boot firmware but as HTC layer does not yet
support USB it's not possible to send any WMI commands nor data
packets to the firmware. That will be added soon.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>

8 files changed, 479 insertions, 8 deletions

diff --git a/drivers/net/wireless/ath/ath6kl/Kconfig b/drivers/net/wireless/ath/ath6kl/Kconfig
index 3d5f8be20ea..d755a5e7ed2 100644
--- a/drivers/net/wireless/ath/ath6kl/Kconfig
+++ b/drivers/net/wireless/ath/ath6kl/Kconfig
@@ -1,12 +1,29 @@
 config ATH6KL
-	tristate "Atheros ath6kl support"
+	tristate "Atheros mobile chipsets support"
+
+config ATH6KL_SDIO
+	tristate "Atheros ath6kl SDIO support"
+	depends on ATH6KL
 	depends on MMC
 	depends on CFG80211
 	---help---
 	  This module adds support for wireless adapters based on
-	  Atheros AR6003 chipset running over SDIO. If you choose to
-	  build it as a module, it will be called ath6kl. Pls note
-	  that AR6002 and AR6001 are not supported by this driver.
+	  Atheros AR6003 and AR6004 chipsets running over SDIO. If you
+	  choose to build it as a module, it will be called ath6kl_sdio.
+	  Please note that AR6002 and AR6001 are not supported by this
+	  driver.
+
+config ATH6KL_USB
+	tristate "Atheros ath6kl USB support"
+	depends on ATH6KL
+	depends on USB
+	depends on CFG80211
+	depends on EXPERIMENTAL
+	---help---
+	  This module adds support for wireless adapters based on
+	  Atheros AR6004 chipset running over USB. This is still under
+	  implementation and it isn't functional. If you choose to
+	  build it as a module, it will be called ath6kl_usb.
 
 config ATH6KL_DEBUG
 	bool "Atheros ath6kl debugging"
diff --git a/drivers/net/wireless/ath/ath6kl/Makefile b/drivers/net/wireless/ath/ath6kl/Makefile
index cbdc31c603f..9ba42fa0496 100644
--- a/drivers/net/wireless/ath/ath6kl/Makefile
+++ b/drivers/net/wireless/ath/ath6kl/Makefile
@@ -36,3 +36,6 @@ ath6kl_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
 
 obj-$(CONFIG_ATH6KL_SDIO) += ath6kl_sdio.o
 ath6kl_sdio-y += sdio.o
+
+obj-$(CONFIG_ATH6KL_USB) += ath6kl_usb.o
+ath6kl_usb-y += usb.o
diff --git a/drivers/net/wireless/ath/ath6kl/bmi.c b/drivers/net/wireless/ath/ath6kl/bmi.c
index bce3575c310..aef00d5a143 100644
--- a/drivers/net/wireless/ath/ath6kl/bmi.c
+++ b/drivers/net/wireless/ath/ath6kl/bmi.c
@@ -57,8 +57,14 @@ int ath6kl_bmi_get_target_info(struct ath6kl *ar,
 		return ret;
 	}
 
-	ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
-				  sizeof(targ_info->version));
+	if (ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)targ_info,
+					  sizeof(*targ_info));
+	} else {
+		ret = ath6kl_hif_bmi_read(ar, (u8 *)&targ_info->version,
+				sizeof(targ_info->version));
+	}
+
 	if (ret) {
 		ath6kl_err("Unable to recv target info: %d\n", ret);
 		return ret;
diff --git a/drivers/net/wireless/ath/ath6kl/debug.h b/drivers/net/wireless/ath/ath6kl/debug.h
index 872a8ce5d8f..c4be6e50996 100644
--- a/drivers/net/wireless/ath/ath6kl/debug.h
+++ b/drivers/net/wireless/ath/ath6kl/debug.h
@@ -41,6 +41,7 @@ enum ATH6K_DEBUG_MASK {
 	ATH6KL_DBG_BOOT		= BIT(18),    /* driver init and fw boot */
 	ATH6KL_DBG_WMI_DUMP	= BIT(19),
 	ATH6KL_DBG_SUSPEND	= BIT(20),
+	ATH6KL_DBG_USB		= BIT(21),
 	ATH6KL_DBG_ANY	        = 0xffffffff  /* enable all logs */
 };
 
diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c
index d912da6ab0d..e911737ab34 100644
--- a/drivers/net/wireless/ath/ath6kl/hif.c
+++ b/drivers/net/wireless/ath/ath6kl/hif.c
@@ -693,6 +693,11 @@ int ath6kl_hif_setup(struct ath6kl_device *dev)
 	ath6kl_dbg(ATH6KL_DBG_HIF, "hif block size %d mbox addr 0x%x\n",
 		   dev->htc_cnxt->block_sz, dev->ar->mbox_info.htc_addr);
 
+	/* usb doesn't support enabling interrupts */
+	/* FIXME: remove check once USB support is implemented */
+	if (dev->ar->hif_type == ATH6KL_HIF_TYPE_USB)
+		return 0;
+
 	status = ath6kl_hif_disable_intrs(dev);
 
 fail_setup:
diff --git a/drivers/net/wireless/ath/ath6kl/htc.c b/drivers/net/wireless/ath/ath6kl/htc.c
index 073ddff3134..2d721903640 100644
--- a/drivers/net/wireless/ath/ath6kl/htc.c
+++ b/drivers/net/wireless/ath/ath6kl/htc.c
@@ -2544,6 +2544,12 @@ int ath6kl_htc_wait_target(struct htc_target *target)
 	struct htc_service_connect_resp resp;
 	int status;
 
+	/* FIXME: remove once USB support is implemented */
+	if (target->dev->ar->hif_type == ATH6KL_HIF_TYPE_USB) {
+		ath6kl_err("HTC doesn't support USB yet. Patience!\n");
+		return -EOPNOTSUPP;
+	}
+
 	/* we should be getting 1 control message that the target is ready */
 	packet = htc_wait_for_ctrl_msg(target);
 
@@ -2773,7 +2779,9 @@ void ath6kl_htc_cleanup(struct htc_target *target)
 {
 	struct htc_packet *packet, *tmp_packet;
 
-	ath6kl_hif_cleanup_scatter(target->dev->ar);
+	/* FIXME: remove check once USB support is implemented */
+	if (target->dev->ar->hif_type != ATH6KL_HIF_TYPE_USB)
+		ath6kl_hif_cleanup_scatter(target->dev->ar);
 
 	list_for_each_entry_safe(packet, tmp_packet,
 			&target->free_ctrl_txbuf, list) {
diff --git a/drivers/net/wireless/ath/ath6kl/sdio.c b/drivers/net/wireless/ath/ath6kl/sdio.c
index bef32ecea79..7bb61077c40 100644
--- a/drivers/net/wireless/ath/ath6kl/sdio.c
+++ b/drivers/net/wireless/ath/ath6kl/sdio.c
@@ -1330,7 +1330,7 @@ static const struct sdio_device_id ath6kl_sdio_devices[] = {
 MODULE_DEVICE_TABLE(sdio, ath6kl_sdio_devices);
 
 static struct sdio_driver ath6kl_sdio_driver = {
-	.name = "ath6kl",
+	.name = "ath6kl_sdio",
 	.id_table = ath6kl_sdio_devices,
 	.probe = ath6kl_sdio_probe,
 	.remove = ath6kl_sdio_remove,
diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c
new file mode 100644
index 00000000000..c72567c6d33
--- /dev/null
+++ b/drivers/net/wireless/ath/ath6kl/usb.c
@@ -0,0 +1,431 @@
+/*
+ * Copyright (c) 2007-2011 Atheros Communications Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/module.h>
+#include <linux/usb.h>
+
+#include "debug.h"
+#include "core.h"
+
+/* usb device object */
+struct ath6kl_usb {
+	struct usb_device *udev;
+	struct usb_interface *interface;
+	u8 *diag_cmd_buffer;
+	u8 *diag_resp_buffer;
+	struct ath6kl *ar;
+};
+
+/* diagnostic command defnitions */
+#define ATH6KL_USB_CONTROL_REQ_SEND_BMI_CMD        1
+#define ATH6KL_USB_CONTROL_REQ_RECV_BMI_RESP       2
+#define ATH6KL_USB_CONTROL_REQ_DIAG_CMD            3
+#define ATH6KL_USB_CONTROL_REQ_DIAG_RESP           4
+
+#define ATH6KL_USB_CTRL_DIAG_CC_READ               0
+#define ATH6KL_USB_CTRL_DIAG_CC_WRITE              1
+
+struct ath6kl_usb_ctrl_diag_cmd_write {
+	__le32 cmd;
+	__le32 address;
+	__le32 value;
+	__le32 _pad[1];
+} __packed;
+
+struct ath6kl_usb_ctrl_diag_cmd_read {
+	__le32 cmd;
+	__le32 address;
+} __packed;
+
+struct ath6kl_usb_ctrl_diag_resp_read {
+	__le32 value;
+} __packed;
+
+#define ATH6KL_USB_MAX_DIAG_CMD (sizeof(struct ath6kl_usb_ctrl_diag_cmd_write))
+#define ATH6KL_USB_MAX_DIAG_RESP (sizeof(struct ath6kl_usb_ctrl_diag_resp_read))
+
+static void ath6kl_usb_destroy(struct ath6kl_usb *ar_usb)
+{
+	usb_set_intfdata(ar_usb->interface, NULL);
+
+	kfree(ar_usb->diag_cmd_buffer);
+	kfree(ar_usb->diag_resp_buffer);
+
+	kfree(ar_usb);
+}
+
+static struct ath6kl_usb *ath6kl_usb_create(struct usb_interface *interface)
+{
+	struct ath6kl_usb *ar_usb = NULL;
+	struct usb_device *dev = interface_to_usbdev(interface);
+	int status = 0;
+
+	ar_usb = kzalloc(sizeof(struct ath6kl_usb), GFP_KERNEL);
+	if (ar_usb == NULL)
+		goto fail_ath6kl_usb_create;
+
+	memset(ar_usb, 0, sizeof(struct ath6kl_usb));
+	usb_set_intfdata(interface, ar_usb);
+	ar_usb->udev = dev;
+	ar_usb->interface = interface;
+
+	ar_usb->diag_cmd_buffer = kzalloc(ATH6KL_USB_MAX_DIAG_CMD, GFP_KERNEL);
+	if (ar_usb->diag_cmd_buffer == NULL) {
+		status = -ENOMEM;
+		goto fail_ath6kl_usb_create;
+	}
+
+	ar_usb->diag_resp_buffer = kzalloc(ATH6KL_USB_MAX_DIAG_RESP,
+					   GFP_KERNEL);
+	if (ar_usb->diag_resp_buffer == NULL) {
+		status = -ENOMEM;
+		goto fail_ath6kl_usb_create;
+	}
+
+fail_ath6kl_usb_create:
+	if (status != 0) {
+		ath6kl_usb_destroy(ar_usb);
+		ar_usb = NULL;
+	}
+	return ar_usb;
+}
+
+static void ath6kl_usb_device_detached(struct usb_interface *interface)
+{
+	struct ath6kl_usb *ar_usb;
+
+	ar_usb = usb_get_intfdata(interface);
+	if (ar_usb == NULL)
+		return;
+
+	ath6kl_stop_txrx(ar_usb->ar);
+
+	ath6kl_core_cleanup(ar_usb->ar);
+
+	ath6kl_usb_destroy(ar_usb);
+}
+
+static int ath6kl_usb_submit_ctrl_out(struct ath6kl_usb *ar_usb,
+				   u8 req, u16 value, u16 index, void *data,
+				   u32 size)
+{
+	u8 *buf = NULL;
+	int ret;
+
+	if (size > 0) {
+		buf = kmalloc(size, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+
+		memcpy(buf, data, size);
+	}
+
+	/* note: if successful returns number of bytes transfered */
+	ret = usb_control_msg(ar_usb->udev,
+			      usb_sndctrlpipe(ar_usb->udev, 0),
+			      req,
+			      USB_DIR_OUT | USB_TYPE_VENDOR |
+			      USB_RECIP_DEVICE, value, index, buf,
+			      size, 1000);
+
+	if (ret < 0) {
+		ath6kl_dbg(ATH6KL_DBG_USB, "%s failed,result = %d\n",
+			   __func__, ret);
+	}
+
+	kfree(buf);
+
+	return 0;
+}
+
+static int ath6kl_usb_submit_ctrl_in(struct ath6kl_usb *ar_usb,
+				  u8 req, u16 value, u16 index, void *data,
+				  u32 size)
+{
+	u8 *buf = NULL;
+	int ret;
+
+	if (size > 0) {
+		buf = kmalloc(size, GFP_KERNEL);
+		if (buf == NULL)
+			return -ENOMEM;
+	}
+
+	/* note: if successful returns number of bytes transfered */
+	ret = usb_control_msg(ar_usb->udev,
+				 usb_rcvctrlpipe(ar_usb->udev, 0),
+				 req,
+				 USB_DIR_IN | USB_TYPE_VENDOR |
+				 USB_RECIP_DEVICE, value, index, buf,
+				 size, 2 * HZ);
+
+	if (ret < 0) {
+		ath6kl_dbg(ATH6KL_DBG_USB, "%s failed,result = %d\n",
+			   __func__, ret);
+	}
+
+	memcpy((u8 *) data, buf, size);
+
+	kfree(buf);
+
+	return 0;
+}
+
+static int ath6kl_usb_ctrl_msg_exchange(struct ath6kl_usb *ar_usb,
+				     u8 req_val, u8 *req_buf, u32 req_len,
+				     u8 resp_val, u8 *resp_buf, u32 *resp_len)
+{
+	int ret;
+
+	/* send command */
+	ret = ath6kl_usb_submit_ctrl_out(ar_usb, req_val, 0, 0,
+					 req_buf, req_len);
+
+	if (ret != 0)
+		return ret;
+
+	if (resp_buf == NULL) {
+		/* no expected response */
+		return ret;
+	}
+
+	/* get response */
+	ret = ath6kl_usb_submit_ctrl_in(ar_usb, resp_val, 0, 0,
+					resp_buf, *resp_len);
+
+	return ret;
+}
+
+static int ath6kl_usb_diag_read32(struct ath6kl *ar, u32 address, u32 *data)
+{
+	struct ath6kl_usb *ar_usb = ar->hif_priv;
+	struct ath6kl_usb_ctrl_diag_resp_read *resp;
+	struct ath6kl_usb_ctrl_diag_cmd_read *cmd;
+	u32 resp_len;
+	int ret;
+
+	cmd = (struct ath6kl_usb_ctrl_diag_cmd_read *) ar_usb->diag_cmd_buffer;
+
+	memset(cmd, 0, sizeof(*cmd));
+	cmd->cmd = ATH6KL_USB_CTRL_DIAG_CC_READ;
+	cmd->address = cpu_to_le32(address);
+	resp_len = sizeof(*resp);
+
+	ret = ath6kl_usb_ctrl_msg_exchange(ar_usb,
+				ATH6KL_USB_CONTROL_REQ_DIAG_CMD,
+				(u8 *) cmd,
+				sizeof(struct ath6kl_usb_ctrl_diag_cmd_write),
+				ATH6KL_USB_CONTROL_REQ_DIAG_RESP,
+				ar_usb->diag_resp_buffer, &resp_len);
+
+	if (ret)
+		return ret;
+
+	resp = (struct ath6kl_usb_ctrl_diag_resp_read *)
+		ar_usb->diag_resp_buffer;
+
+	*data = le32_to_cpu(resp->value);
+
+	return ret;
+}
+
+static int ath6kl_usb_diag_write32(struct ath6kl *ar, u32 address, __le32 data)
+{
+	struct ath6kl_usb *ar_usb = ar->hif_priv;
+	struct ath6kl_usb_ctrl_diag_cmd_write *cmd;
+
+	cmd = (struct ath6kl_usb_ctrl_diag_cmd_write *) ar_usb->diag_cmd_buffer;
+
+	memset(cmd, 0, sizeof(struct ath6kl_usb_ctrl_diag_cmd_write));
+	cmd->cmd = cpu_to_le32(ATH6KL_USB_CTRL_DIAG_CC_WRITE);
+	cmd->address = cpu_to_le32(address);
+	cmd->value = data;
+
+	return ath6kl_usb_ctrl_msg_exchange(ar_usb,
+					    ATH6KL_USB_CONTROL_REQ_DIAG_CMD,
+					    (u8 *) cmd,
+					    sizeof(*cmd),
+					    0, NULL, NULL);
+
+}
+
+static int ath6kl_usb_bmi_read(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	struct ath6kl_usb *ar_usb = ar->hif_priv;
+	int ret;
+
+	/* get response */
+	ret = ath6kl_usb_submit_ctrl_in(ar_usb,
+					ATH6KL_USB_CONTROL_REQ_RECV_BMI_RESP,
+					0, 0, buf, len);
+	if (ret != 0) {
+		ath6kl_err("Unable to read the bmi data from the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath6kl_usb_bmi_write(struct ath6kl *ar, u8 *buf, u32 len)
+{
+	struct ath6kl_usb *ar_usb = ar->hif_priv;
+	int ret;
+
+	/* send command */
+	ret = ath6kl_usb_submit_ctrl_out(ar_usb,
+					 ATH6KL_USB_CONTROL_REQ_SEND_BMI_CMD,
+					 0, 0, buf, len);
+	if (ret != 0) {
+		ath6kl_err("unable to send the bmi data to the device: %d\n",
+			   ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int ath6kl_usb_power_on(struct ath6kl *ar)
+{
+	return 0;
+}
+
+static int ath6kl_usb_power_off(struct ath6kl *ar)
+{
+	return 0;
+}
+
+static const struct ath6kl_hif_ops ath6kl_usb_ops = {
+	.diag_read32 = ath6kl_usb_diag_read32,
+	.diag_write32 = ath6kl_usb_diag_write32,
+	.bmi_read = ath6kl_usb_bmi_read,
+	.bmi_write = ath6kl_usb_bmi_write,
+	.power_on = ath6kl_usb_power_on,
+	.power_off = ath6kl_usb_power_off,
+};
+
+/* ath6kl usb driver registered functions */
+static int ath6kl_usb_probe(struct usb_interface *interface,
+			    const struct usb_device_id *id)
+{
+	struct usb_device *dev = interface_to_usbdev(interface);
+	struct ath6kl *ar;
+	struct ath6kl_usb *ar_usb = NULL;
+	int vendor_id, product_id;
+	int ret = 0;
+
+	usb_get_dev(dev);
+
+	vendor_id = le16_to_cpu(dev->descriptor.idVendor);
+	product_id = le16_to_cpu(dev->descriptor.idProduct);
+
+	ath6kl_dbg(ATH6KL_DBG_USB, "vendor_id = %04x\n", vendor_id);
+	ath6kl_dbg(ATH6KL_DBG_USB, "product_id = %04x\n", product_id);
+
+	if (interface->cur_altsetting)
+		ath6kl_dbg(ATH6KL_DBG_USB, "USB Interface %d\n",
+			   interface->cur_altsetting->desc.bInterfaceNumber);
+
+
+	if (dev->speed == USB_SPEED_HIGH)
+		ath6kl_dbg(ATH6KL_DBG_USB, "USB 2.0 Host\n");
+	else
+		ath6kl_dbg(ATH6KL_DBG_USB, "USB 1.1 Host\n");
+
+	ar_usb = ath6kl_usb_create(interface);
+
+	if (ar_usb == NULL) {
+		ret = -ENOMEM;
+		goto err_usb_put;
+	}
+
+	ar = ath6kl_core_create(&ar_usb->udev->dev);
+	if (ar == NULL) {
+		ath6kl_err("Failed to alloc ath6kl core\n");
+		ret = -ENOMEM;
+		goto err_usb_destroy;
+	}
+
+	ar->hif_priv = ar_usb;
+	ar->hif_type = ATH6KL_HIF_TYPE_USB;
+	ar->hif_ops = &ath6kl_usb_ops;
+	ar->mbox_info.block_size = 16;
+	ar->bmi.max_data_size = 252;
+
+	ar_usb->ar = ar;
+
+	ret = ath6kl_core_init(ar);
+	if (ret) {
+		ath6kl_err("Failed to init ath6kl core: %d\n", ret);
+		goto err_core_free;
+	}
+
+	return ret;
+
+err_core_free:
+	ath6kl_core_destroy(ar);
+err_usb_destroy:
+	ath6kl_usb_destroy(ar_usb);
+err_usb_put:
+	usb_put_dev(dev);
+
+	return ret;
+}
+
+static void ath6kl_usb_remove(struct usb_interface *interface)
+{
+	usb_put_dev(interface_to_usbdev(interface));
+	ath6kl_usb_device_detached(interface);
+}
+
+/* table of devices that work with this driver */
+static struct usb_device_id ath6kl_usb_ids[] = {
+	{USB_DEVICE(0x0cf3, 0x9374)},
+	{ /* Terminating entry */ },
+};
+
+MODULE_DEVICE_TABLE(usb, ath6kl_usb_ids);
+
+static struct usb_driver ath6kl_usb_driver = {
+	.name = "ath6kl_usb",
+	.probe = ath6kl_usb_probe,
+	.disconnect = ath6kl_usb_remove,
+	.id_table = ath6kl_usb_ids,
+};
+
+static int ath6kl_usb_init(void)
+{
+	usb_register(&ath6kl_usb_driver);
+	return 0;
+}
+
+static void ath6kl_usb_exit(void)
+{
+	usb_deregister(&ath6kl_usb_driver);
+}
+
+module_init(ath6kl_usb_init);
+module_exit(ath6kl_usb_exit);
+
+MODULE_AUTHOR("Atheros Communications, Inc.");
+MODULE_DESCRIPTION("Driver support for Atheros AR600x USB devices");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_FIRMWARE(AR6004_HW_1_0_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_0_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_0_DEFAULT_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_FIRMWARE_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_BOARD_DATA_FILE);
+MODULE_FIRMWARE(AR6004_HW_1_1_DEFAULT_BOARD_DATA_FILE);