Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "It looks like a sizeble collection but this is nearly 3 weeks of bug
  fixing while you were away.

   1) Fix crashes over IPSEC tunnels with NAT, the latter can reroute
      the packet through a non-IPSEC protected path and the code has to
      be able to handle SKBs attached to routes lacking an attached xfrm
      state.  From Steffen Klassert.

   2) Fix OOPSs in ipv4 and ipv6 ipsec layers for unsupported
      sub-protocols, also from Steffen Klassert.

   3) Set local_df on fragmented netfilter skbs otherwise we won't be
      able to forward successfully, from Florian Westphal.

   4) cdc_mbim ipv6 neighbour code does __vlan_find_dev_deep without
      holding RCU lock, from Bjorn Mork.

   5) local_df test in ip_may_fragment is inverted, from Florian
      Westphal.

   6) jme driver doesn't check for DMA mapping failures, from Neil
      Horman.

   7) qlogic driver doesn't calculate number of TX queues properly, from
      Shahed Shaikh.

   8) fib_info_cnt can drift irreversibly positive if we fail to
      allocate the fi->fib_metrics array, from Sergey Popovich.

   9) Fix use after free in ip6_route_me_harder(), also from Sergey
      Popovich.

  10) When SYSCTL is disabled, we don't handle local_port_range and
      ping_group_range defaults properly at all, from Cong Wang.

  11) Unaccelerated VLAN tagged frames improperly handled by cdc_mbim
      driver, fix from Bjorn Mork.

  12) cassini driver needs nested lock annotations for TX locking, from
      Emil Goode.

  13) On init error ipv6 VTI driver can unregister pernet ops twice,
      oops.  Fix from Mahtias Krause.

  14) If macvlan device is down, don't propagate IFF_ALLMULTI changes,
      from Peter Christensen.

  15) Missing NULL pointer check while parsing netlink config options in
      ip6_tnl_validate().  From Susant Sahani.

  16) Fix handling of neighbour entries during ipv6 router reachability
      probing, from Duan Jiong.

  17) x86 and s390 JIT address randomization has some address
      calculation bugs leading to crashes, from Alexei Starovoitov and
      Heiko Carstens.

  18) Clear up those uglies with nop patching and net_get_random_once(),
      from Hannes Frederic Sowa.

  19) Option length miscalculated in ip6_append_data(), fix also from
      Hannes Frederic Sowa.

  20) A while ago we fixed a race during device unregistry when a
      namespace went down, turns out there is a second place that needs
      similar protection.  From Cong Wang.

  21) In the new Altera TSE driver multicast filtering isn't working,
      disable it and just use promisc mode until the cause is found.
      From Vince Bridgers.

  22) When we disable router enabling in ipv6 we have to flush the
      cached routes explicitly, from Duan Jiong.

  23) NBMA tunnels should not cache routes on the tunnel object because
      the key is variable, from Timo Teräs.

  24) With stacked devices GRO information in skb->cb[] can be not setup
      properly, make sure it is in all code paths.  From Eric Dumazet.

  25) Really fix stacked vlan locking, multiple levels of nesting with
      intervening non-vlan devices are possible.  From Vlad Yasevich.

  26) Fallback ipip tunnel device's mtu is not setup properly, from
      Steffen Klassert.

  27) The packet scheduler's tcindex filter can crash because we
      structure copy objects with list_head's inside, oops.  From Cong
      Wang.

  28) Fix CHECKSUM_COMPLETE handling for ipv6 GRE tunnels, from Eric
      Dumazet.

  29) In some configurations 'itag' in __mkroute_input() can end up
      being used uninitialized because of how fib_validate_source()
      works.  Fix it by explitly initializing itag to zero like all the
      other fib_validate_source() callers do, from Li RongQing"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (116 commits)
  batman: fix a bogus warning from batadv_is_on_batman_iface()
  ipv4: initialise the itag variable in __mkroute_input
  bonding: Send ALB learning packets using the right source
  bonding: Don't assume 802.1Q when sending alb learning packets.
  net: doc: Update references to skb->rxhash
  stmmac: Remove unbalanced clk_disable call
  ipv6: gro: fix CHECKSUM_COMPLETE support
  net_sched: fix an oops in tcindex filter
  can: peak_pci: prevent use after free at netdev removal
  ip_tunnel: Initialize the fallback device properly
  vlan: Fix build error wth vlan_get_encap_level()
  can: c_can: remove obsolete STRICT_FRAME_ORDERING Kconfig option
  MAINTAINERS: Pravin Shelar is Open vSwitch maintainer.
  bnx2x: Convert return 0 to return rc
  bonding: Fix alb mode to only use first level vlans.
  bonding: Fix stacked device detection in arp monitoring
  macvlan: Fix lockdep warnings with stacked macvlan devices
  vlan: Fix lockdep warning with stacked vlan devices.
  net: Allow for more then a single subclass for netif_addr_lock
  net: Find the nesting level of a given device by type.
  ...

10 files changed, 61 insertions, 58 deletions

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
index f46cd0250e4..5627917c5ff 100644
--- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c
+++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c
@@ -95,8 +95,10 @@ static void ath9k_htc_vif_iter(void *data, u8 *mac, struct ieee80211_vif *vif)
 
 	if ((vif->type == NL80211_IFTYPE_AP ||
 	     vif->type == NL80211_IFTYPE_MESH_POINT) &&
-	    bss_conf->enable_beacon)
+	    bss_conf->enable_beacon) {
 		priv->reconfig_beacon = true;
+		priv->rearm_ani = true;
+	}
 
 	if (bss_conf->assoc) {
 		priv->rearm_ani = true;
@@ -257,6 +259,7 @@ static int ath9k_htc_set_channel(struct ath9k_htc_priv *priv,
 
 	ath9k_htc_ps_wakeup(priv);
 
+	ath9k_htc_stop_ani(priv);
 	del_timer_sync(&priv->tx.cleanup_timer);
 	ath9k_htc_tx_drain(priv);
 
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
index afb3d15e38f..be1985296bd 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c
@@ -4948,7 +4948,7 @@ static int brcmf_enable_bw40_2g(struct brcmf_if *ifp)
 	if (!err) {
 		/* only set 2G bandwidth using bw_cap command */
 		band_bwcap.band = cpu_to_le32(WLC_BAND_2G);
-		band_bwcap.bw_cap = cpu_to_le32(WLC_BW_40MHZ_BIT);
+		band_bwcap.bw_cap = cpu_to_le32(WLC_BW_CAP_40MHZ);
 		err = brcmf_fil_iovar_data_set(ifp, "bw_cap", &band_bwcap,
 					       sizeof(band_bwcap));
 	} else {
diff --git a/drivers/net/wireless/iwlwifi/mvm/coex.c b/drivers/net/wireless/iwlwifi/mvm/coex.c
index fa858d548d1..0489314425c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/coex.c
+++ b/drivers/net/wireless/iwlwifi/mvm/coex.c
@@ -611,14 +611,14 @@ int iwl_send_bt_init_conf(struct iwl_mvm *mvm)
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_SYNC2SCO);
 
 	if (IWL_MVM_BT_COEX_CORUNNING) {
-		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_CORUN_LUT_20 |
-						    BT_VALID_CORUN_LUT_40);
+		bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_CORUN_LUT_20 |
+						     BT_VALID_CORUN_LUT_40);
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_CORUNNING);
 	}
 
 	if (IWL_MVM_BT_COEX_MPLUT) {
 		bt_cmd->flags |= cpu_to_le32(BT_COEX_MPLUT);
-		bt_cmd->valid_bit_msk = cpu_to_le32(BT_VALID_MULTI_PRIO_LUT);
+		bt_cmd->valid_bit_msk |= cpu_to_le32(BT_VALID_MULTI_PRIO_LUT);
 	}
 
 	if (mvm->cfg->bt_shared_single_ant)
diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
index 9426905de6b..d73a89ecd78 100644
--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -183,9 +183,9 @@ enum iwl_scan_type {
  *	this number of packets were received (typically 1)
  * @passive2active: is auto switching from passive to active during scan allowed
  * @rxchain_sel_flags: RXON_RX_CHAIN_*
- * @max_out_time: in usecs, max out of serving channel time
+ * @max_out_time: in TUs, max out of serving channel time
  * @suspend_time: how long to pause scan when returning to service channel:
- *	bits 0-19: beacon interal in usecs (suspend before executing)
+ *	bits 0-19: beacon interal in TUs (suspend before executing)
  *	bits 20-23: reserved
  *	bits 24-31: number of beacons (suspend between channels)
  * @rxon_flags: RXON_FLG_*
@@ -383,8 +383,8 @@ enum scan_framework_client {
  * @quiet_plcp_th:	quiet channel num of packets threshold
  * @good_CRC_th:	passive to active promotion threshold
  * @rx_chain:		RXON rx chain.
- * @max_out_time:	max uSec to be out of assoceated channel
- * @suspend_time:	pause scan this long when returning to service channel
+ * @max_out_time:	max TUs to be out of assoceated channel
+ * @suspend_time:	pause scan this TUs when returning to service channel
  * @flags:		RXON flags
  * @filter_flags:	RXONfilter
  * @tx_cmd:		tx command for active scan; for 2GHz and for 5GHz.
diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
index f0cebf12c7b..b41dc84e943 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c
+++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c
@@ -1007,7 +1007,7 @@ static void iwl_mvm_mc_iface_iterator(void *_data, u8 *mac,
 	memcpy(cmd->bssid, vif->bss_conf.bssid, ETH_ALEN);
 	len = roundup(sizeof(*cmd) + cmd->count * ETH_ALEN, 4);
 
-	ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_SYNC, len, cmd);
+	ret = iwl_mvm_send_cmd_pdu(mvm, MCAST_FILTER_CMD, CMD_ASYNC, len, cmd);
 	if (ret)
 		IWL_ERR(mvm, "mcast filter cmd error. ret=%d\n", ret);
 }
@@ -1023,7 +1023,7 @@ static void iwl_mvm_recalc_multicast(struct iwl_mvm *mvm)
 	if (WARN_ON_ONCE(!mvm->mcast_filter_cmd))
 		return;
 
-	ieee80211_iterate_active_interfaces(
+	ieee80211_iterate_active_interfaces_atomic(
 		mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
 		iwl_mvm_mc_iface_iterator, &iter_data);
 }
@@ -1807,6 +1807,11 @@ static int iwl_mvm_mac_sched_scan_start(struct ieee80211_hw *hw,
 
 	mutex_lock(&mvm->mutex);
 
+	if (!iwl_mvm_is_idle(mvm)) {
+		ret = -EBUSY;
+		goto out;
+	}
+
 	switch (mvm->scan_status) {
 	case IWL_MVM_SCAN_OS:
 		IWL_DEBUG_SCAN(mvm, "Stopping previous scan for sched_scan\n");
diff --git a/drivers/net/wireless/iwlwifi/mvm/mvm.h b/drivers/net/wireless/iwlwifi/mvm/mvm.h
index d564233a65d..f1ec0986c3c 100644
--- a/drivers/net/wireless/iwlwifi/mvm/mvm.h
+++ b/drivers/net/wireless/iwlwifi/mvm/mvm.h
@@ -1003,6 +1003,9 @@ static inline bool iwl_mvm_vif_low_latency(struct iwl_mvm_vif *mvmvif)
 	return mvmvif->low_latency;
 }
 
+/* Assoc status */
+bool iwl_mvm_is_idle(struct iwl_mvm *mvm);
+
 /* Thermal management and CT-kill */
 void iwl_mvm_tt_tx_backoff(struct iwl_mvm *mvm, u32 backoff);
 void iwl_mvm_tt_handler(struct iwl_mvm *mvm);
diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c
index 9f52c5b3f0e..e1c83889936 100644
--- a/drivers/net/wireless/iwlwifi/mvm/rs.c
+++ b/drivers/net/wireless/iwlwifi/mvm/rs.c
@@ -1010,7 +1010,7 @@ static void rs_tx_status(void *mvm_r, struct ieee80211_supported_band *sband,
 		return;
 	}
 
-#ifdef CPTCFG_MAC80211_DEBUGFS
+#ifdef CONFIG_MAC80211_DEBUGFS
 	/* Disable last tx check if we are debugging with fixed rate */
 	if (lq_sta->dbg_fixed_rate) {
 		IWL_DEBUG_RATE(mvm, "Fixed rate. avoid rate scaling\n");
diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c
index c91dc849885..c28de54c75d 100644
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -277,51 +277,22 @@ static void iwl_mvm_scan_calc_params(struct iwl_mvm *mvm,
 					    IEEE80211_IFACE_ITER_NORMAL,
 					    iwl_mvm_scan_condition_iterator,
 					    &global_bound);
-	/*
-	 * Under low latency traffic passive scan is fragmented meaning
-	 * that dwell on a particular channel will be fragmented. Each fragment
-	 * dwell time is 20ms and fragments period is 105ms. Skipping to next
-	 * channel will be delayed by the same period - 105ms. So suspend_time
-	 * parameter describing both fragments and channels skipping periods is
-	 * set to 105ms. This value is chosen so that overall passive scan
-	 * duration will not be too long. Max_out_time in this case is set to
-	 * 70ms, so for active scanning operating channel will be left for 70ms
-	 * while for passive still for 20ms (fragment dwell).
-	 */
-	if (global_bound) {
-		if (!iwl_mvm_low_latency(mvm)) {
-			params->suspend_time = ieee80211_tu_to_usec(100);
-			params->max_out_time = ieee80211_tu_to_usec(600);
-		} else {
-			params->suspend_time = ieee80211_tu_to_usec(105);
-			/* P2P doesn't support fragmented passive scan, so
-			 * configure max_out_time to be at least longest dwell
-			 * time for passive scan.
-			 */
-			if (vif->type == NL80211_IFTYPE_STATION && !vif->p2p) {
-				params->max_out_time = ieee80211_tu_to_usec(70);
-				params->passive_fragmented = true;
-			} else {
-				u32 passive_dwell;
 
-				/*
-				 * Use band G so that passive channel dwell time
-				 * will be assigned with maximum value.
-				 */
-				band = IEEE80211_BAND_2GHZ;
-				passive_dwell = iwl_mvm_get_passive_dwell(band);
-				params->max_out_time =
-					ieee80211_tu_to_usec(passive_dwell);
-			}
-		}
+	if (!global_bound)
+		goto not_bound;
+
+	params->suspend_time = 100;
+	params->max_out_time = 600;
+
+	if (iwl_mvm_low_latency(mvm)) {
+		params->suspend_time = 250;
+		params->max_out_time = 250;
 	}
 
+not_bound:
+
 	for (band = IEEE80211_BAND_2GHZ; band < IEEE80211_NUM_BANDS; band++) {
-		if (params->passive_fragmented)
-			params->dwell[band].passive = 20;
-		else
-			params->dwell[band].passive =
-				iwl_mvm_get_passive_dwell(band);
+		params->dwell[band].passive = iwl_mvm_get_passive_dwell(band);
 		params->dwell[band].active = iwl_mvm_get_active_dwell(band,
 								      n_ssids);
 	}
@@ -761,7 +732,7 @@ int iwl_mvm_config_sched_scan(struct iwl_mvm *mvm,
 	int band_2ghz = mvm->nvm_data->bands[IEEE80211_BAND_2GHZ].n_channels;
 	int band_5ghz = mvm->nvm_data->bands[IEEE80211_BAND_5GHZ].n_channels;
 	int head = 0;
-	int tail = band_2ghz + band_5ghz;
+	int tail = band_2ghz + band_5ghz - 1;
 	u32 ssid_bitmap;
 	int cmd_len;
 	int ret;
diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c
index d619851745a..2180902266a 100644
--- a/drivers/net/wireless/iwlwifi/mvm/utils.c
+++ b/drivers/net/wireless/iwlwifi/mvm/utils.c
@@ -644,3 +644,22 @@ bool iwl_mvm_low_latency(struct iwl_mvm *mvm)
 
 	return result;
 }
+
+static void iwl_mvm_idle_iter(void *_data, u8 *mac, struct ieee80211_vif *vif)
+{
+	bool *idle = _data;
+
+	if (!vif->bss_conf.idle)
+		*idle = false;
+}
+
+bool iwl_mvm_is_idle(struct iwl_mvm *mvm)
+{
+	bool idle = true;
+
+	ieee80211_iterate_active_interfaces_atomic(
+			mvm->hw, IEEE80211_IFACE_ITER_NORMAL,
+			iwl_mvm_idle_iter, &idle);
+
+	return idle;
+}
diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c
index dcfd6d866d0..2365553f1ef 100644
--- a/drivers/net/wireless/iwlwifi/pcie/trans.c
+++ b/drivers/net/wireless/iwlwifi/pcie/trans.c
@@ -1749,6 +1749,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 	 * PCI Tx retries from interfering with C3 CPU state */
 	pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
 
+	trans->dev = &pdev->dev;
+	trans_pcie->pci_dev = pdev;
+	iwl_disable_interrupts(trans);
+
 	err = pci_enable_msi(pdev);
 	if (err) {
 		dev_err(&pdev->dev, "pci_enable_msi failed(0X%x)\n", err);
@@ -1760,8 +1764,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 		}
 	}
 
-	trans->dev = &pdev->dev;
-	trans_pcie->pci_dev = pdev;
 	trans->hw_rev = iwl_read32(trans, CSR_HW_REV);
 	trans->hw_id = (pdev->device << 16) + pdev->subsystem_device;
 	snprintf(trans->hw_id_str, sizeof(trans->hw_id_str),
@@ -1787,8 +1789,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 		goto out_pci_disable_msi;
 	}
 
-	trans_pcie->inta_mask = CSR_INI_SET_MASK;
-
 	if (iwl_pcie_alloc_ict(trans))
 		goto out_free_cmd_pool;
 
@@ -1800,6 +1800,8 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev,
 		goto out_free_ict;
 	}
 
+	trans_pcie->inta_mask = CSR_INI_SET_MASK;
+
 	return trans;
 
 out_free_ict: