diff options
| author | Jeff Garzik <jgarzik@pretzel.yyz.us> | 2005-06-26 17:11:03 -0400 |
|---|---|---|
| committer | Jeff Garzik <jgarzik@pobox.com> | 2005-06-26 17:11:03 -0400 |
| commit | 8b0ee07e108b2eefdab5bb73f33223f18926c3b2 (patch) | |
| tree | f68ca04180c5488301a40ec212ef2eb2467cf56c /drivers/net | |
| parent | 4638aef40ba9ebb9734caeed1f373c24015259fd (diff) | |
| parent | 8678887e7fb43cd6c9be6c9807b05e77848e0920 (diff) | |
Merge upstream (approx. 2.6.12-git8) into 'janitor' branch of netdev-2.6.
Diffstat (limited to 'drivers/net')
81 files changed, 26303 insertions, 5328 deletions
diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index b5e07604343..80ec9aa575b 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -2202,9 +2202,8 @@ boomerang_start_xmit(struct sk_buff *skb, struct net_device *dev) if (vortex_debug > 6) { printk(KERN_DEBUG "boomerang_start_xmit()\n"); - if (vortex_debug > 3) - printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", - dev->name, vp->cur_tx); + printk(KERN_DEBUG "%s: Trying to send a packet, Tx index %d.\n", + dev->name, vp->cur_tx); } if (vp->cur_tx - vp->dirty_tx >= TX_RING_SIZE) { diff --git a/drivers/net/8139cp.c b/drivers/net/8139cp.c index ca4c9ac7e11..ca7746dd164 100644 --- a/drivers/net/8139cp.c +++ b/drivers/net/8139cp.c @@ -54,6 +54,7 @@ #include <linux/config.h> #include <linux/module.h> +#include <linux/moduleparam.h> #include <linux/kernel.h> #include <linux/compiler.h> #include <linux/netdevice.h> @@ -92,16 +93,17 @@ KERN_INFO DRV_NAME ": 10/100 PCI Ethernet driver v" DRV_VERSION " (" DRV_RELDATE MODULE_AUTHOR("Jeff Garzik <jgarzik@pobox.com>"); MODULE_DESCRIPTION("RealTek RTL-8139C+ series 10/100 PCI Ethernet driver"); +MODULE_VERSION(DRV_VERSION); MODULE_LICENSE("GPL"); static int debug = -1; -MODULE_PARM (debug, "i"); +module_param(debug, int, 0); MODULE_PARM_DESC (debug, "8139cp: bitmapped message enable number"); /* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). The RTL chips use a 64 element hash table based on the Ethernet CRC. */ static int multicast_filter_limit = 32; -MODULE_PARM (multicast_filter_limit, "i"); +module_param(multicast_filter_limit, int, 0); MODULE_PARM_DESC (multicast_filter_limit, "8139cp: maximum number of filtered multicast addresses"); #define PFX DRV_NAME ": " @@ -187,6 +189,9 @@ enum { RingEnd = (1 << 30), /* End of descriptor ring */ FirstFrag = (1 << 29), /* First segment of a packet */ LastFrag = (1 << 28), /* Final segment of a packet */ + LargeSend = (1 << 27), /* TCP Large Send Offload (TSO) */ + MSSShift = 16, /* MSS value position */ + MSSMask = 0xfff, /* MSS value: 11 bits */ TxError = (1 << 23), /* Tx error summary */ RxError = (1 << 20), /* Rx error summary */ IPCS = (1 << 18), /* Calculate IP checksum */ @@ -313,7 +318,7 @@ struct cp_desc { struct ring_info { struct sk_buff *skb; dma_addr_t mapping; - unsigned frag; + u32 len; }; struct cp_dma_stats { @@ -395,6 +400,9 @@ struct cp_private { static void __cp_set_rx_mode (struct net_device *dev); static void cp_tx (struct cp_private *cp); static void cp_clean_rings (struct cp_private *cp); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void cp_poll_controller(struct net_device *dev); +#endif static struct pci_device_id cp_pci_tbl[] = { { PCI_VENDOR_ID_REALTEK, PCI_DEVICE_ID_REALTEK_8139, @@ -689,6 +697,19 @@ cp_interrupt (int irq, void *dev_instance, struct pt_regs *regs) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/* + * Polling receive - used by netconsole and other diagnostic tools + * to allow network i/o with interrupts disabled. + */ +static void cp_poll_controller(struct net_device *dev) +{ + disable_irq(dev->irq); + cp_interrupt(dev->irq, dev, NULL); + enable_irq(dev->irq); +} +#endif + static void cp_tx (struct cp_private *cp) { unsigned tx_head = cp->tx_head; @@ -708,7 +729,7 @@ static void cp_tx (struct cp_private *cp) BUG(); pci_unmap_single(cp->pdev, cp->tx_skb[tx_tail].mapping, - skb->len, PCI_DMA_TODEVICE); + cp->tx_skb[tx_tail].len, PCI_DMA_TODEVICE); if (status & LastFrag) { if (status & (TxError | TxFIFOUnder)) { @@ -750,10 +771,11 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct cp_private *cp = netdev_priv(dev); unsigned entry; - u32 eor; + u32 eor, flags; #if CP_VLAN_TAG_USED u32 vlan_tag = 0; #endif + int mss = 0; spin_lock_irq(&cp->lock); @@ -773,6 +795,9 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) entry = cp->tx_head; eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; + if (dev->features & NETIF_F_TSO) + mss = skb_shinfo(skb)->tso_size; + if (skb_shinfo(skb)->nr_frags == 0) { struct cp_desc *txd = &cp->tx_ring[entry]; u32 len; @@ -784,26 +809,26 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) txd->addr = cpu_to_le64(mapping); wmb(); - if (skb->ip_summed == CHECKSUM_HW) { + flags = eor | len | DescOwn | FirstFrag | LastFrag; + + if (mss) + flags |= LargeSend | ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { const struct iphdr *ip = skb->nh.iph; if (ip->protocol == IPPROTO_TCP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | TCPCS); + flags |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag | - IPCS | UDPCS); + flags |= IPCS | UDPCS; else - BUG(); - } else - txd->opts1 = cpu_to_le32(eor | len | DescOwn | - FirstFrag | LastFrag); + WARN_ON(1); /* we need a WARN() */ + } + + txd->opts1 = cpu_to_le32(flags); wmb(); cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = 0; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } else { struct cp_desc *txd; @@ -821,7 +846,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) first_len, PCI_DMA_TODEVICE); cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = first_mapping; - cp->tx_skb[entry].frag = 1; + cp->tx_skb[entry].len = first_len; entry = NEXT_TX(entry); for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) { @@ -837,16 +862,19 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) len, PCI_DMA_TODEVICE); eor = (entry == (CP_TX_RING_SIZE - 1)) ? RingEnd : 0; - if (skb->ip_summed == CHECKSUM_HW) { - ctrl = eor | len | DescOwn | IPCS; + ctrl = eor | len | DescOwn; + + if (mss) + ctrl |= LargeSend | + ((mss & MSSMask) << MSSShift); + else if (skb->ip_summed == CHECKSUM_HW) { if (ip->protocol == IPPROTO_TCP) - ctrl |= TCPCS; + ctrl |= IPCS | TCPCS; else if (ip->protocol == IPPROTO_UDP) - ctrl |= UDPCS; + ctrl |= IPCS | UDPCS; else BUG(); - } else - ctrl = eor | len | DescOwn; + } if (frag == skb_shinfo(skb)->nr_frags - 1) ctrl |= LastFrag; @@ -861,7 +889,7 @@ static int cp_start_xmit (struct sk_buff *skb, struct net_device *dev) cp->tx_skb[entry].skb = skb; cp->tx_skb[entry].mapping = mapping; - cp->tx_skb[entry].frag = frag + 2; + cp->tx_skb[entry].len = len; entry = NEXT_TX(entry); } @@ -1075,7 +1103,6 @@ static int cp_refill_rx (struct cp_private *cp) cp->rx_skb[i].mapping = pci_map_single(cp->pdev, skb->tail, cp->rx_buf_sz, PCI_DMA_FROMDEVICE); cp->rx_skb[i].skb = skb; - cp->rx_skb[i].frag = 0; cp->rx_ring[i].opts2 = 0; cp->rx_ring[i].addr = cpu_to_le64(cp->rx_skb[i].mapping); @@ -1127,9 +1154,6 @@ static void cp_clean_rings (struct cp_private *cp) { unsigned i; - memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); - memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); - for (i = 0; i < CP_RX_RING_SIZE; i++) { if (cp->rx_skb[i].skb) { pci_unmap_single(cp->pdev, cp->rx_skb[i].mapping, @@ -1141,13 +1165,18 @@ static void cp_clean_rings (struct cp_private *cp) for (i = 0; i < CP_TX_RING_SIZE; i++) { if (cp->tx_skb[i].skb) { struct sk_buff *skb = cp->tx_skb[i].skb; + pci_unmap_single(cp->pdev, cp->tx_skb[i].mapping, - skb->len, PCI_DMA_TODEVICE); - dev_kfree_skb(skb); + cp->tx_skb[i].len, PCI_DMA_TODEVICE); + if (le32_to_cpu(cp->tx_ring[i].opts1) & LastFrag) + dev_kfree_skb(skb); cp->net_stats.tx_dropped++; } } + memset(cp->rx_ring, 0, sizeof(struct cp_desc) * CP_RX_RING_SIZE); + memset(cp->tx_ring, 0, sizeof(struct cp_desc) * CP_TX_RING_SIZE); + memset(&cp->rx_skb, 0, sizeof(struct ring_info) * CP_RX_RING_SIZE); memset(&cp->tx_skb, 0, sizeof(struct ring_info) * CP_TX_RING_SIZE); } @@ -1539,6 +1568,8 @@ static struct ethtool_ops cp_ethtool_ops = { .set_tx_csum = ethtool_op_set_tx_csum, /* local! */ .get_sg = ethtool_op_get_sg, .set_sg = ethtool_op_set_sg, + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, .get_regs = cp_get_regs, .get_wol = cp_get_wol, .set_wol = cp_set_wol, @@ -1750,6 +1781,9 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) dev->get_stats = cp_get_stats; dev->do_ioctl = cp_ioctl; dev->poll = cp_rx_poll; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = cp_poll_controller; +#endif dev->weight = 16; /* arbitrary? from NAPI_HOWTO.txt. */ #ifdef BROKEN dev->change_mtu = cp_change_mtu; @@ -1769,6 +1803,10 @@ static int cp_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) if (pci_using_dac) dev->features |= NETIF_F_HIGHDMA; +#if 0 /* disabled by default until verified */ + dev->features |= NETIF_F_TSO; +#endif + dev->irq = pdev->irq; rc = register_netdev(dev); diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index d4bd20c21a1..5a4a08a7c95 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -569,7 +569,7 @@ struct rtl_extra_stats { }; struct rtl8139_private { - void *mmio_addr; + void __iomem *mmio_addr; int drv_flags; struct pci_dev *pci_dev; u32 msg_enable; @@ -614,7 +614,7 @@ MODULE_PARM_DESC (multicast_filter_limit, "8139too maximum number of filtered mu MODULE_PARM_DESC (media, "8139too: Bits 4+9: force full duplex, bit 5: 100Mbps"); MODULE_PARM_DESC (full_duplex, "8139too: Force full duplex for board(s) (1)"); -static int read_eeprom (void *ioaddr, int location, int addr_len); +static int read_eeprom (void __iomem *ioaddr, int location, int addr_len); static int rtl8139_open (struct net_device *dev); static int mdio_read (struct net_device *dev, int phy_id, int location); static void mdio_write (struct net_device *dev, int phy_id, int location, @@ -638,46 +638,20 @@ static void __set_rx_mode (struct net_device *dev); static void rtl8139_hw_start (struct net_device *dev); static struct ethtool_ops rtl8139_ethtool_ops; -#ifdef USE_IO_OPS - -#define RTL_R8(reg) inb (((unsigned long)ioaddr) + (reg)) -#define RTL_R16(reg) inw (((unsigned long)ioaddr) + (reg)) -#define RTL_R32(reg) ((unsigned long) inl (((unsigned long)ioaddr) + (reg))) -#define RTL_W8(reg, val8) outb ((val8), ((unsigned long)ioaddr) + (reg)) -#define RTL_W16(reg, val16) outw ((val16), ((unsigned long)ioaddr) + (reg)) -#define RTL_W32(reg, val32) outl ((val32), ((unsigned long)ioaddr) + (reg)) -#define RTL_W8_F RTL_W8 -#define RTL_W16_F RTL_W16 -#define RTL_W32_F RTL_W32 -#undef readb -#undef readw -#undef readl -#undef writeb -#undef writew -#undef writel -#define readb(addr) inb((unsigned long)(addr)) -#define readw(addr) inw((unsigned long)(addr)) -#define readl(addr) inl((unsigned long)(addr)) -#define writeb(val,addr) outb((val),(unsigned long)(addr)) -#define writew(val,addr) outw((val),(unsigned long)(addr)) -#define writel(val,addr) outl((val),(unsigned long)(addr)) - -#else - /* write MMIO register, with flush */ /* Flush avoids rtl8139 bug w/ posted MMIO writes */ -#define RTL_W8_F(reg, val8) do { writeb ((val8), ioaddr + (reg)); readb (ioaddr + (reg)); } while (0) -#define RTL_W16_F(reg, val16) do { writew ((val16), ioaddr + (reg)); readw (ioaddr + (reg)); } while (0) -#define RTL_W32_F(reg, val32) do { writel ((val32), ioaddr + (reg)); readl (ioaddr + (reg)); } while (0) +#define RTL_W8_F(reg, val8) do { iowrite8 ((val8), ioaddr + (reg)); ioread8 (ioaddr + (reg)); } while (0) +#define RTL_W16_F(reg, val16) do { iowrite16 ((val16), ioaddr + (reg)); ioread16 (ioaddr + (reg)); } while (0) +#define RTL_W32_F(reg, val32) do { iowrite32 ((val32), ioaddr + (reg)); ioread32 (ioaddr + (reg)); } while (0) #define MMIO_FLUSH_AUDIT_COMPLETE 1 #if MMIO_FLUSH_AUDIT_COMPLETE /* write MMIO register */ -#define RTL_W8(reg, val8) writeb ((val8), ioaddr + (reg)) -#define RTL_W16(reg, val16) writew ((val16), ioaddr + (reg)) -#define RTL_W32(reg, val32) writel ((val32), ioaddr + (reg)) +#define RTL_W8(reg, val8) iowrite8 ((val8), ioaddr + (reg)) +#define RTL_W16(reg, val16) iowrite16 ((val16), ioaddr + (reg)) +#define RTL_W32(reg, val32) iowrite32 ((val32), ioaddr + (reg)) #else @@ -689,11 +663,9 @@ static struct ethtool_ops rtl8139_ethtool_ops; #endif /* MMIO_FLUSH_AUDIT_COMPLETE */ /* read MMIO register */ -#define RTL_R8(reg) readb (ioaddr + (reg)) -#define RTL_R16(reg) readw (ioaddr + (reg)) -#define RTL_R32(reg) ((unsigned long) readl (ioaddr + (reg))) - -#endif /* USE_IO_OPS */ +#define RTL_R8(reg) ioread8 (ioaddr + (reg)) +#define RTL_R16(reg) ioread16 (ioaddr + (reg)) +#define RTL_R32(reg) ((unsigned long) ioread32 (ioaddr + (reg))) static const u16 rtl8139_intr_mask = @@ -740,10 +712,13 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) assert (tp->pci_dev != NULL); pdev = tp->pci_dev; -#ifndef USE_IO_OPS +#ifdef USE_IO_OPS + if (tp->mmio_addr) + ioport_unmap (tp->mmio_addr); +#else if (tp->mmio_addr) - iounmap (tp->mmio_addr); -#endif /* !USE_IO_OPS */ + pci_iounmap (pdev, tp->mmio_addr); +#endif /* USE_IO_OPS */ /* it's ok to call this even if we have no regions to free */ pci_release_regions (pdev); @@ -753,7 +728,7 @@ static void __rtl8139_cleanup_dev (struct net_device *dev) } -static void rtl8139_chip_reset (void *ioaddr) +static void rtl8139_chip_reset (void __iomem *ioaddr) { int i; @@ -773,7 +748,7 @@ static void rtl8139_chip_reset (void *ioaddr) static int __devinit rtl8139_init_board (struct pci_dev *pdev, struct net_device **dev_out) { - void *ioaddr; + void __iomem *ioaddr; struct net_device *dev; struct rtl8139_private *tp; u8 tmp8; @@ -855,13 +830,18 @@ static int __devinit rtl8139_init_board (struct pci_dev *pdev, pci_set_master (pdev); #ifdef USE_IO_OPS - ioaddr = (void *) pio_start; + ioaddr = ioport_map(pio_start, pio_len); + if (!ioaddr) { + printk (KERN_ERR PFX "%s: cannot map PIO, aborting\n", pci_name(pdev)); + rc = -EIO; + goto err_out; + } dev->base_addr = pio_start; tp->mmio_addr = ioaddr; tp->regs_len = pio_len; #else /* ioremap MMIO region */ - ioaddr = ioremap (mmio_start, mmio_len); + ioaddr = pci_iomap(pdev, 1, 0); if (ioaddr == NULL) { printk (KERN_ERR PFX "%s: cannot remap MMIO, aborting\n", pci_name(pdev)); rc = -EIO; @@ -947,7 +927,7 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, struct net_device *dev = NULL; struct rtl8139_private *tp; int i, addr_len, option; - void *ioaddr; + void __iomem *ioaddr; static int board_idx = -1; u8 pci_rev; @@ -1147,47 +1127,46 @@ static void __devexit rtl8139_remove_one (struct pci_dev *pdev) No extra delay is needed with 33Mhz PCI, but 66Mhz may change this. */ -#define eeprom_delay() readl(ee_addr) +#define eeprom_delay() RTL_R32(Cfg9346) /* The EEPROM commands include the alway-set leading bit. */ #define EE_WRITE_CMD (5) #define EE_READ_CMD (6) #define EE_ERASE_CMD (7) -static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) +static int __devinit read_eeprom (void __iomem *ioaddr, int location, int addr_len) { int i; unsigned retval = 0; - void *ee_addr = ioaddr + Cfg9346; int read_cmd = location | (EE_READ_CMD << addr_len); - writeb (EE_ENB & ~EE_CS, ee_addr); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB & ~EE_CS); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); /* Shift the read command bits out. */ for (i = 4 + addr_len; i >= 0; i--) { int dataval = (read_cmd & (1 << i)) ? EE_DATA_WRITE : 0; - writeb (EE_ENB | dataval, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval); eeprom_delay (); - writeb (EE_ENB | dataval | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | dataval | EE_SHIFT_CLK); eeprom_delay (); } - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); for (i = 16; i > 0; i--) { - writeb (EE_ENB | EE_SHIFT_CLK, ee_addr); + RTL_W8 (Cfg9346, EE_ENB | EE_SHIFT_CLK); eeprom_delay (); retval = - (retval << 1) | ((readb (ee_addr) & EE_DATA_READ) ? 1 : + (retval << 1) | ((RTL_R8 (Cfg9346) & EE_DATA_READ) ? 1 : 0); - writeb (EE_ENB, ee_addr); + RTL_W8 (Cfg9346, EE_ENB); eeprom_delay (); } /* Terminate the EEPROM access. */ - writeb (~EE_CS, ee_addr); + RTL_W8 (Cfg9346, ~EE_CS); eeprom_delay (); return retval; @@ -1206,7 +1185,7 @@ static int __devinit read_eeprom (void *ioaddr, int location, int addr_len) #define MDIO_WRITE0 (MDIO_DIR) #define MDIO_WRITE1 (MDIO_DIR | MDIO_DATA_OUT) -#define mdio_delay(mdio_addr) readb(mdio_addr) +#define mdio_delay() RTL_R8(Config4) static char mii_2_8139_map[8] = { @@ -1223,15 +1202,15 @@ static char mii_2_8139_map[8] = { #ifdef CONFIG_8139TOO_8129 /* Syncronize the MII management interface by shifting 32 one bits out. */ -static void mdio_sync (void *mdio_addr) +static void mdio_sync (void __iomem *ioaddr) { int i; for (i = 32; i >= 0; i--) { - writeb (MDIO_WRITE1, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_WRITE1 | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_WRITE1); + mdio_delay (); + RTL_W8 (Config4, MDIO_WRITE1 | MDIO_CLK); + mdio_delay (); } } #endif @@ -1241,35 +1220,36 @@ static int mdio_read (struct net_device *dev, int phy_id, int location) struct rtl8139_private *tp = netdev_priv(dev); int retval = 0; #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0xf6 << 10) | (phy_id << 5) | location; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ + void __iomem *ioaddr = tp->mmio_addr; return location < 8 && mii_2_8139_map[location] ? - readw (tp->mmio_addr + mii_2_8139_map[location]) : 0; + RTL_R16 (mii_2_8139_map[location]) : 0; } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the read command bits out. */ for (i = 15; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_DATA_OUT : 0; - writeb (MDIO_DIR | dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_DIR | dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, MDIO_DIR | dataval); + mdio_delay (); + RTL_W8 (Config4, MDIO_DIR | dataval | MDIO_CLK); + mdio_delay (); } /* Read the two transition, 16 data, and wire-idle bits. */ for (i = 19; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - retval = (retval << 1) | ((readb (mdio_addr) & MDIO_DATA_IN) ? 1 : 0); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + retval = (retval << 1) | ((RTL_R8 (Config4) & MDIO_DATA_IN) ? 1 : 0); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif @@ -1282,13 +1262,13 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, { struct rtl8139_private *tp = netdev_priv(dev); #ifdef CONFIG_8139TOO_8129 - void *mdio_addr = tp->mmio_addr + Config4; + void __iomem *ioaddr = tp->mmio_addr; int mii_cmd = (0x5002 << 16) | (phy_id << 23) | (location << 18) | value; int i; #endif if (phy_id > 31) { /* Really a 8139. Use internal registers. */ - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; if (location == 0) { RTL_W8 (Cfg9346, Cfg9346_Unlock); RTL_W16 (BasicModeCtrl, value); @@ -1299,23 +1279,23 @@ static void mdio_write (struct net_device *dev, int phy_id, int location, } #ifdef CONFIG_8139TOO_8129 - mdio_sync (mdio_addr); + mdio_sync (ioaddr); /* Shift the command bits out. */ for (i = 31; i >= 0; i--) { int dataval = (mii_cmd & (1 << i)) ? MDIO_WRITE1 : MDIO_WRITE0; - writeb (dataval, mdio_addr); - mdio_delay (mdio_addr); - writeb (dataval | MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, dataval); + mdio_delay (); + RTL_W8 (Config4, dataval | MDIO_CLK); + mdio_delay (); } /* Clear out extra bits. */ for (i = 2; i > 0; i--) { - writeb (0, mdio_addr); - mdio_delay (mdio_addr); - writeb (MDIO_CLK, mdio_addr); - mdio_delay (mdio_addr); + RTL_W8 (Config4, 0); + mdio_delay (); + RTL_W8 (Config4, MDIO_CLK); + mdio_delay (); } #endif } @@ -1325,7 +1305,7 @@ static int rtl8139_open (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); int retval; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; retval = request_irq (dev->irq, rtl8139_interrupt, SA_SHIRQ, dev->name, dev); if (retval) @@ -1382,7 +1362,7 @@ static void rtl_check_media (struct net_device *dev, unsigned int init_media) static void rtl8139_hw_start (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 i; u8 tmp; @@ -1484,7 +1464,7 @@ static void rtl8139_tune_twister (struct net_device *dev, struct rtl8139_private *tp) { int linkcase; - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; /* This is a complicated state machine to configure the "twister" for impedance/echos based on the cable length. @@ -1568,7 +1548,7 @@ static void rtl8139_tune_twister (struct net_device *dev, static inline void rtl8139_thread_iter (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { int mii_lpa; @@ -1626,7 +1606,7 @@ static int rtl8139_thread (void *data) do { timeout = interruptible_sleep_on_timeout (&tp->thr_wait, timeout); /* make swsusp happy with our thread */ - try_to_freeze(PF_FREEZE); + try_to_freeze(); } while (!signal_pending (current) && (timeout > 0)); if (signal_pending (current)) { @@ -1676,7 +1656,7 @@ static inline void rtl8139_tx_clear (struct rtl8139_private *tp) static void rtl8139_tx_timeout (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int i; u8 tmp8; unsigned long flags; @@ -1721,7 +1701,7 @@ static void rtl8139_tx_timeout (struct net_device *dev) static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned int entry; unsigned int len = skb->len; @@ -1763,7 +1743,7 @@ static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) static void rtl8139_tx_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr) + void __iomem *ioaddr) { unsigned long dirty_tx, tx_left; @@ -1833,7 +1813,7 @@ static void rtl8139_tx_interrupt (struct net_device *dev, /* TODO: clean this up! Rx reset need not be this intensive */ static void rtl8139_rx_err (u32 rx_status, struct net_device *dev, - struct rtl8139_private *tp, void *ioaddr) + struct rtl8139_private *tp, void __iomem *ioaddr) { u8 tmp8; #ifdef CONFIG_8139_OLD_RX_RESET @@ -1930,7 +1910,7 @@ static __inline__ void wrap_copy(struct sk_buff *skb, const unsigned char *ring, static void rtl8139_isr_ack(struct rtl8139_private *tp) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status; status = RTL_R16 (IntrStatus) & RxAckBits; @@ -1949,7 +1929,7 @@ static void rtl8139_isr_ack(struct rtl8139_private *tp) static int rtl8139_rx(struct net_device *dev, struct rtl8139_private *tp, int budget) { - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int received = 0; unsigned char *rx_ring = tp->rx_ring; unsigned int cur_rx = tp->cur_rx; @@ -2087,7 +2067,7 @@ out: static void rtl8139_weird_interrupt (struct net_device *dev, struct rtl8139_private *tp, - void *ioaddr, + void __iomem *ioaddr, int status, int link_changed) { DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n", @@ -2127,7 +2107,7 @@ static void rtl8139_weird_interrupt (struct net_device *dev, static int rtl8139_poll(struct net_device *dev, int *budget) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int orig_budget = min(*budget, dev->quota); int done = 1; @@ -2165,7 +2145,7 @@ static irqreturn_t rtl8139_interrupt (int irq, void *dev_instance, { struct net_device *dev = (struct net_device *) dev_instance; struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u16 status, ackstat; int link_changed = 0; /* avoid bogus "uninit" warning */ int handled = 0; @@ -2241,7 +2221,7 @@ static void rtl8139_poll_controller(struct net_device *dev) static int rtl8139_close (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; int ret = 0; unsigned long flags; @@ -2304,7 +2284,7 @@ static int rtl8139_close (struct net_device *dev) static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; spin_lock_irq(&np->lock); if (rtl_chip_info[np->chipset].flags & HasLWake) { @@ -2338,7 +2318,7 @@ static void rtl8139_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) static int rtl8139_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct rtl8139_private *np = netdev_priv(dev); - void *ioaddr = np->mmio_addr; + void __iomem *ioaddr = np->mmio_addr; u32 support; u8 cfg3, cfg5; @@ -2506,7 +2486,7 @@ static int netdev_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; if (netif_running(dev)) { @@ -2525,7 +2505,7 @@ static struct net_device_stats *rtl8139_get_stats (struct net_device *dev) static void __set_rx_mode (struct net_device *dev) { struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; u32 mc_filter[2]; /* Multicast hash filter */ int i, rx_mode; u32 tmp; @@ -2586,7 +2566,7 @@ static int rtl8139_suspend (struct pci_dev *pdev, pm_message_t state) { struct net_device *dev = pci_get_drvdata (pdev); struct rtl8139_private *tp = netdev_priv(dev); - void *ioaddr = tp->mmio_addr; + void __iomem *ioaddr = tp->mmio_addr; unsigned long flags; pci_save_state (pdev); diff --git a/drivers/net/8390.c b/drivers/net/8390.c index bab16bcc9ae..6d76f3a99b1 100644 --- a/drivers/net/8390.c +++ b/drivers/net/8390.c @@ -225,9 +225,9 @@ void ei_tx_timeout(struct net_device *dev) unsigned long icucr; local_irq_save(flags); - icucr = inl(ICUCR1); + icucr = inl(M32R_ICU_CR1_PORTL); icucr |= M32R_ICUCR_ISMOD11; - outl(icucr, ICUCR1); + outl(icucr, M32R_ICU_CR1_PORTL); local_irq_restore(flags); #endif ei_local->stat.tx_errors++; diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 3a0a55b62aa..fa9f76c953d 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -824,6 +824,18 @@ config SMC9194 <file:Documentation/networking/net-modules.txt>. The module will be called smc9194. +config DM9000 + tristate "DM9000 support" + depends on ARM && NET_ETHERNET + select CRC32 + select MII + ---help--- + Support for DM9000 chipset. + + To compile this driver as a module, choose M here and read + <file:Documentation/networking/net-modules.txt>. The module will be + called dm9000. + config NET_VENDOR_RACAL bool "Racal-Interlan (Micom) NI cards" depends on NET_ETHERNET && ISA @@ -989,21 +1001,6 @@ config EEXPRESS_PRO <file:Documentation/networking/net-modules.txt>. The module will be called eepro. -config FMV18X - tristate "FMV-181/182/183/184 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - ---help--- - If you have a Fujitsu FMV-181/182/183/184 network (Ethernet) card, - say Y and read the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - If you use an FMV-183 or FMV-184 and it is not working, you may need - to disable Plug & Play mode of the card. - - To compile this driver as a module, choose M here and read - <file:Documentation/networking/net-modules.txt>. The module - will be called fmv18x. - config HPLAN_PLUS tristate "HP PCLAN+ (27247B and 27252A) support" depends on NET_ISA @@ -1092,14 +1089,6 @@ config SEEQ8005 <file:Documentation/networking/net-modules.txt>. The module will be called seeq8005. -config SK_G16 - tristate "SK_G16 support (OBSOLETE)" - depends on NET_ISA && OBSOLETE - help - If you have a network (Ethernet) card of this type, say Y and read - the Ethernet-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - config SKMC tristate "SKnet MCA support" depends on NET_ETHERNET && MCA && BROKEN @@ -1555,6 +1544,7 @@ config SIS900 tristate "SiS 900/7016 PCI Fast Ethernet Adapter support" depends on NET_PCI && PCI select CRC32 + select MII ---help--- This is a driver for the Fast Ethernet PCI network cards based on the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in @@ -1931,6 +1921,18 @@ config R8169_VLAN If in doubt, say Y. +config SKGE + tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)" + depends on PCI && EXPERIMENTAL + select CRC32 + ---help--- + This driver support the Marvell Yukon or SysKonnect SK-98xx/SK-95xx + and related Gigabit Ethernet adapters. It is a new smaller driver + driver with better performance and more complete ethtool support. + + It does not support the link failover and network management + features that "portable" vendor supplied sk98lin driver does. + config SK98LIN tristate "Marvell Yukon Chipset / SysKonnect SK-98xx Support" depends on PCI @@ -2031,6 +2033,15 @@ config TIGON3 To compile this driver as a module, choose M here: the module will be called tg3. This is recommended. +config BNX2 + tristate "Broadcom NetXtremeII support" + depends on PCI + help + This driver supports Broadcom NetXtremeII gigabit Ethernet cards. + + To compile this driver as a module, choose M here: the module + will be called bnx2. This is recommended. + config GIANFAR tristate "Gianfar Ethernet" depends on 85xx || 83xx diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 6202b10dbb4..63c6d1e6d4d 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -51,7 +51,9 @@ obj-$(CONFIG_NS83820) += ns83820.o obj-$(CONFIG_STNIC) += stnic.o 8390.o obj-$(CONFIG_FEALNX) += fealnx.o obj-$(CONFIG_TIGON3) += tg3.o +obj-$(CONFIG_BNX2) += bnx2.o obj-$(CONFIG_TC35815) += tc35815.o +obj-$(CONFIG_SKGE) += skge.o obj-$(CONFIG_SK98LIN) += sk98lin/ obj-$(CONFIG_SKFP) += skfp/ obj-$(CONFIG_VIA_RHINE) += via-rhine.o @@ -73,7 +75,6 @@ obj-$(CONFIG_MAC8390) += mac8390.o 8390.o obj-$(CONFIG_APNE) += apne.o 8390.o obj-$(CONFIG_PCMCIA_PCNET) += 8390.o obj-$(CONFIG_SHAPER) += shaper.o -obj-$(CONFIG_SK_G16) += sk_g16.o obj-$(CONFIG_HP100) += hp100.o obj-$(CONFIG_SMC9194) += smc9194.o obj-$(CONFIG_FEC) += fec.o @@ -121,7 +122,6 @@ obj-$(CONFIG_DEFXX) += defxx.o obj-$(CONFIG_SGISEEQ) += sgiseeq.o obj-$(CONFIG_SGI_O2MACE_ETH) += meth.o obj-$(CONFIG_AT1700) += at1700.o -obj-$(CONFIG_FMV18X) += fmv18x.o obj-$(CONFIG_EL1) += 3c501.o obj-$(CONFIG_EL16) += 3c507.o obj-$(CONFIG_ELMC) += 3c523.o @@ -179,6 +179,7 @@ obj-$(CONFIG_AMD8111_ETH) += amd8111e.o obj-$(CONFIG_IBMVETH) += ibmveth.o obj-$(CONFIG_S2IO) += s2io.o obj-$(CONFIG_SMC91X) += smc91x.o +obj-$(CONFIG_DM9000) += dm9000.o obj-$(CONFIG_FEC_8XX) += fec_8xx/ obj-$(CONFIG_ARM) += arm/ @@ -187,7 +188,7 @@ obj-$(CONFIG_TR) += tokenring/ obj-$(CONFIG_WAN) += wan/ obj-$(CONFIG_ARCNET) += arcnet/ obj-$(CONFIG_NET_PCMCIA) += pcmcia/ -obj-$(CONFIG_NET_WIRELESS) += wireless/ +obj-$(CONFIG_NET_RADIO) += wireless/ obj-$(CONFIG_NET_TULIP) += tulip/ obj-$(CONFIG_HAMRADIO) += hamradio/ obj-$(CONFIG_IRDA) += irda/ diff --git a/drivers/net/Space.c b/drivers/net/Space.c index fb433325aa2..3707df6b0cf 100644 --- a/drivers/net/Space.c +++ b/drivers/net/Space.c @@ -210,9 +210,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_AT1700 {at1700_probe, 0}, #endif -#ifdef CONFIG_FMV18X /* Fujitsu FMV-181/182 */ - {fmv18x_probe, 0}, -#endif #ifdef CONFIG_ETH16I {eth16i_probe, 0}, /* ICL EtherTeam 16i/32 */ #endif @@ -243,9 +240,6 @@ static struct devprobe2 isa_probes[] __initdata = { #ifdef CONFIG_ELPLUS /* 3c505 */ {elplus_probe, 0}, #endif -#ifdef CONFIG_SK_G16 - {SK_init, 0}, -#endif #ifdef CONFIG_NI5010 {ni5010_probe, 0}, #endif diff --git a/drivers/net/amd8111e.c b/drivers/net/amd8111e.c index f2e937abf7b..b7dd7260caf 100755 --- a/drivers/net/amd8111e.c +++ b/drivers/net/amd8111e.c @@ -738,6 +738,7 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) short vtag; #endif int rx_pkt_limit = dev->quota; + unsigned long flags; do{ /* process receive packets until we use the quota*/ @@ -841,18 +842,19 @@ static int amd8111e_rx_poll(struct net_device *dev, int * budget) /* Receive descriptor is empty now */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; + + spin_lock_irqsave(&lp->lock, flags); netif_rx_complete(dev); - /* enable receive interrupt */ writel(VAL0|RINTEN0, mmio + INTEN0); writel(VAL2 | RDMD0, mmio + CMD0); + spin_unlock_irqrestore(&lp->lock, flags); return 0; + rx_not_empty: /* Do not call a netif_rx_complete */ dev->quota -= num_rx_pkt; *budget -= num_rx_pkt; return 1; - - } #else @@ -1261,18 +1263,20 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg struct net_device * dev = (struct net_device *) dev_id; struct amd8111e_priv *lp = netdev_priv(dev); void __iomem *mmio = lp->mmio; - unsigned int intr0; + unsigned int intr0, intren0; unsigned int handled = 1; - if(dev == NULL) + if(unlikely(dev == NULL)) return IRQ_NONE; - if (regs) spin_lock (&lp->lock); + spin_lock(&lp->lock); + /* disabling interrupt */ writel(INTREN, mmio + CMD0); /* Read interrupt status */ intr0 = readl(mmio + INT0); + intren0 = readl(mmio + INTEN0); /* Process all the INT event until INTR bit is clear. */ @@ -1293,11 +1297,11 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg /* Schedule a polling routine */ __netif_rx_schedule(dev); } - else { + else if (intren0 & RINTEN0) { printk("************Driver bug! \ interrupt while in poll\n"); - /* Fix by disabling interrupts */ - writel(RINT0, mmio + INT0); + /* Fix by disable receive interrupts */ + writel(RINTEN0, mmio + INTEN0); } } #else @@ -1321,7 +1325,7 @@ static irqreturn_t amd8111e_interrupt(int irq, void *dev_id, struct pt_regs *reg err_no_interrupt: writel( VAL0 | INTREN,mmio + CMD0); - if (regs) spin_unlock(&lp->lock); + spin_unlock(&lp->lock); return IRQ_RETVAL(handled); } diff --git a/drivers/net/appletalk/ltpc.c b/drivers/net/appletalk/ltpc.c index db4f369637b..d5666c37cb0 100644 --- a/drivers/net/appletalk/ltpc.c +++ b/drivers/net/appletalk/ltpc.c @@ -1109,8 +1109,7 @@ struct net_device * __init ltpc_probe(void) inb_p(io+1); inb_p(io+3); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(2*HZ/100); + msleep(20); inb_p(io+0); inb_p(io+2); @@ -1120,8 +1119,7 @@ struct net_device * __init ltpc_probe(void) inb_p(io+5); /* enable dma */ inb_p(io+6); /* tri-state interrupt line */ - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(HZ); + ssleep(1); /* now, figure out which dma channel we're using, unless it's already been specified */ diff --git a/drivers/net/arm/etherh.c b/drivers/net/arm/etherh.c index 942a2819576..2e28c201dcc 100644 --- a/drivers/net/arm/etherh.c +++ b/drivers/net/arm/etherh.c @@ -68,6 +68,7 @@ struct etherh_priv { void __iomem *dma_base; unsigned int id; void __iomem *ctrl_port; + void __iomem *base; unsigned char ctrl; u32 supported; }; @@ -177,7 +178,7 @@ etherh_setif(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: @@ -218,7 +219,7 @@ etherh_getifstat(struct net_device *dev) switch (etherh_priv(dev)->id) { case PROD_I3_ETHERLAN600: case PROD_I3_ETHERLAN600A: - addr = (void *)dev->base_addr + EN0_RCNTHI; + addr = etherh_priv(dev)->base + EN0_RCNTHI; switch (dev->if_port) { case IF_PORT_10BASE2: stat = 1; @@ -281,7 +282,7 @@ static void etherh_reset(struct net_device *dev) { struct ei_device *ei_local = netdev_priv(dev); - void __iomem *addr = (void *)dev->base_addr; + void __iomem *addr = etherh_priv(dev)->base; writeb(E8390_NODMA+E8390_PAGE0+E8390_STOP, addr); @@ -327,7 +328,7 @@ etherh_block_output (struct net_device *dev, int count, const unsigned char *buf ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; count = (count + 1) & ~1; @@ -387,7 +388,7 @@ etherh_block_input (struct net_device *dev, int count, struct sk_buff *skb, int ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; buf = skb->data; @@ -427,7 +428,7 @@ etherh_get_header (struct net_device *dev, struct e8390_pkt_hdr *hdr, int ring_p ei_local->dmaing = 1; - addr = (void *)dev->base_addr; + addr = etherh_priv(dev)->base; dma_base = etherh_priv(dev)->dma_base; writeb (E8390_NODMA | E8390_PAGE0 | E8390_START, addr + E8390_CMD); @@ -696,7 +697,8 @@ etherh_probe(struct expansion_card *ec, const struct ecard_id *id) eh->ctrl_port = eh->ioc_fast; } - dev->base_addr = (unsigned long)eh->memc + data->ns8390_offset; + eh->base = eh->memc + data->ns8390_offset; + dev->base_addr = (unsigned long)eh->base; eh->dma_base = eh->memc + data->dataport_offset; eh->ctrl_port += data->ctrlport_offset; diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 5a2efd343db..c82b9cd1c92 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1681,10 +1681,6 @@ static int au1000_init(struct net_device *dev) control |= MAC_FULL_DUPLEX; } - /* fix for startup without cable */ - if (!link) - dev->flags &= ~IFF_RUNNING; - aup->mac->control = control; aup->mac->vlan1_tag = 0x8100; /* activate vlan support */ au_sync(); @@ -1709,16 +1705,14 @@ static void au1000_timer(unsigned long data) if_port = dev->if_port; if (aup->phy_ops->phy_status(dev, aup->phy_addr, &link, &speed) == 0) { if (link) { - if (!(dev->flags & IFF_RUNNING)) { + if (!netif_carrier_ok(dev)) { netif_carrier_on(dev); - dev->flags |= IFF_RUNNING; printk(KERN_INFO "%s: link up\n", dev->name); } } else { - if (dev->flags & IFF_RUNNING) { + if (netif_carrier_ok(dev)) { netif_carrier_off(dev); - dev->flags &= ~IFF_RUNNING; dev->if_port = 0; printk(KERN_INFO "%s: link down\n", dev->name); } diff --git a/drivers/net/bmac.c b/drivers/net/bmac.c index 734bd4ee3f9..00e5257b176 100644 --- a/drivers/net/bmac.c +++ b/drivers/net/bmac.c @@ -1412,7 +1412,6 @@ static int bmac_open(struct net_device *dev) bp->opened = 1; bmac_reset_and_enable(dev); enable_irq(dev->irq); - dev->flags |= IFF_RUNNING; return 0; } @@ -1425,7 +1424,6 @@ static int bmac_close(struct net_device *dev) int i; bp->sleeping = 1; - dev->flags &= ~(IFF_UP | IFF_RUNNING); /* disable rx and tx */ config = bmread(dev, RXCFG); diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c new file mode 100644 index 00000000000..8acc655ec1e --- /dev/null +++ b/drivers/net/bnx2.c @@ -0,0 +1,5530 @@ +/* bnx2.c: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + +#include "bnx2.h" +#include "bnx2_fw.h" + +#define DRV_MODULE_NAME "bnx2" +#define PFX DRV_MODULE_NAME ": " +#define DRV_MODULE_VERSION "1.2.19" +#define DRV_MODULE_RELDATE "May 23, 2005" + +#define RUN_AT(x) (jiffies + (x)) + +/* Time in jiffies before concluding the transmitter is hung. */ +#define TX_TIMEOUT (5*HZ) + +static char version[] __devinitdata = + "Broadcom NetXtreme II Gigabit Ethernet Driver " DRV_MODULE_NAME " v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; + +MODULE_AUTHOR("Michael Chan <mchan@broadcom.com>"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706 Driver"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_MODULE_VERSION); + +static int disable_msi = 0; + +module_param(disable_msi, int, 0); +MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); + +typedef enum { + BCM5706 = 0, + NC370T, + NC370I, + BCM5706S, + NC370F, +} board_t; + +/* indexed by board_t, above */ +static struct { + char *name; +} board_info[] __devinitdata = { + { "Broadcom NetXtreme II BCM5706 1000Base-T" }, + { "HP NC370T Multifunction Gigabit Server Adapter" }, + { "HP NC370i Multifunction Gigabit Server Adapter" }, + { "Broadcom NetXtreme II BCM5706 1000Base-SX" }, + { "HP NC370F Multifunction Gigabit Server Adapter" }, + { 0 }, + }; + +static struct pci_device_id bnx2_pci_tbl[] = { + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3101, 0, 0, NC370T }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_VENDOR_ID_HP, 0x3106, 0, 0, NC370I }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706 }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_VENDOR_ID_HP, 0x3102, 0, 0, NC370F }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_NX2_5706S, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5706S }, + { 0, } +}; + +static struct flash_spec flash_table[] = +{ + /* Slow EEPROM */ + {0x00000000, 0x40030380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - slow"}, + /* Fast EEPROM */ + {0x02000000, 0x62008380, 0x009f0081, 0xa184a053, 0xaf000400, + 1, SEEPROM_PAGE_BITS, SEEPROM_PAGE_SIZE, + SEEPROM_BYTE_ADDR_MASK, SEEPROM_TOTAL_SIZE, + "EEPROM - fast"}, + /* ATMEL AT45DB011B (buffered flash) */ + {0x02000003, 0x6e008173, 0x00570081, 0x68848353, 0xaf000400, + 1, BUFFERED_FLASH_PAGE_BITS, BUFFERED_FLASH_PAGE_SIZE, + BUFFERED_FLASH_BYTE_ADDR_MASK, BUFFERED_FLASH_TOTAL_SIZE, + "Buffered flash"}, + /* Saifun SA25F005 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x01000003, 0x5f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE, + "Non-buffered flash (64kB)"}, + /* Saifun SA25F010 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000001, 0x47008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*2, + "Non-buffered flash (128kB)"}, + /* Saifun SA25F020 (non-buffered flash) */ + /* strap, cfg1, & write1 need updates */ + {0x00000003, 0x4f008081, 0x00050081, 0x03840253, 0xaf020406, + 0, SAIFUN_FLASH_PAGE_BITS, SAIFUN_FLASH_PAGE_SIZE, + SAIFUN_FLASH_BYTE_ADDR_MASK, SAIFUN_FLASH_BASE_TOTAL_SIZE*4, + "Non-buffered flash (256kB)"}, +}; + +MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl); + +static u32 +bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + return (REG_RD(bp, BNX2_PCICFG_REG_WINDOW)); +} + +static void +bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val) +{ + REG_WR(bp, BNX2_PCICFG_REG_WINDOW_ADDRESS, offset); + REG_WR(bp, BNX2_PCICFG_REG_WINDOW, val); +} + +static void +bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val) +{ + offset += cid_addr; + REG_WR(bp, BNX2_CTX_DATA_ADR, offset); + REG_WR(bp, BNX2_CTX_DATA, val); +} + +static int +bnx2_read_phy(struct bnx2 *bp, u32 reg, u32 *val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | + BNX2_EMAC_MDIO_COMM_COMMAND_READ | BNX2_EMAC_MDIO_COMM_DISEXT | + BNX2_EMAC_MDIO_COMM_START_BUSY; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + val1 &= BNX2_EMAC_MDIO_COMM_DATA; + + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) { + *val = 0x0; + ret = -EBUSY; + } + else { + *val = val1; + ret = 0; + } + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static int +bnx2_write_phy(struct bnx2 *bp, u32 reg, u32 val) +{ + u32 val1; + int i, ret; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 &= ~BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + val1 = (bp->phy_addr << 21) | (reg << 16) | val | + BNX2_EMAC_MDIO_COMM_COMMAND_WRITE | + BNX2_EMAC_MDIO_COMM_START_BUSY | BNX2_EMAC_MDIO_COMM_DISEXT; + REG_WR(bp, BNX2_EMAC_MDIO_COMM, val1); + + for (i = 0; i < 50; i++) { + udelay(10); + + val1 = REG_RD(bp, BNX2_EMAC_MDIO_COMM); + if (!(val1 & BNX2_EMAC_MDIO_COMM_START_BUSY)) { + udelay(5); + break; + } + } + + if (val1 & BNX2_EMAC_MDIO_COMM_START_BUSY) + ret = -EBUSY; + else + ret = 0; + + if (bp->phy_flags & PHY_INT_MODE_AUTO_POLLING_FLAG) { + val1 = REG_RD(bp, BNX2_EMAC_MDIO_MODE); + val1 |= BNX2_EMAC_MDIO_MODE_AUTO_POLL; + + REG_WR(bp, BNX2_EMAC_MDIO_MODE, val1); + REG_RD(bp, BNX2_EMAC_MDIO_MODE); + + udelay(40); + } + + return ret; +} + +static void +bnx2_disable_int(struct bnx2 *bp) +{ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD); +} + +static void +bnx2_enable_int(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | bp->last_status_idx); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); +} + +static void +bnx2_disable_int_sync(struct bnx2 *bp) +{ + atomic_inc(&bp->intr_sem); + bnx2_disable_int(bp); + synchronize_irq(bp->pdev->irq); +} + +static void +bnx2_netif_stop(struct bnx2 *bp) +{ + bnx2_disable_int_sync(bp); + if (netif_running(bp->dev)) { + netif_poll_disable(bp->dev); + netif_tx_disable(bp->dev); + bp->dev->trans_start = jiffies; /* prevent tx timeout */ + } +} + +static void +bnx2_netif_start(struct bnx2 *bp) +{ + if (atomic_dec_and_test(&bp->intr_sem)) { + if (netif_running(bp->dev)) { + netif_wake_queue(bp->dev); + netif_poll_enable(bp->dev); + bnx2_enable_int(bp); + } + } +} + +static void +bnx2_free_mem(struct bnx2 *bp) +{ + if (bp->stats_blk) { + pci_free_consistent(bp->pdev, sizeof(struct statistics_block), + bp->stats_blk, bp->stats_blk_mapping); + bp->stats_blk = NULL; + } + if (bp->status_blk) { + pci_free_consistent(bp->pdev, sizeof(struct status_block), + bp->status_blk, bp->status_blk_mapping); + bp->status_blk = NULL; + } + if (bp->tx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct tx_bd) * TX_DESC_CNT, + bp->tx_desc_ring, bp->tx_desc_mapping); + bp->tx_desc_ring = NULL; + } + if (bp->tx_buf_ring) { + kfree(bp->tx_buf_ring); + bp->tx_buf_ring = NULL; + } + if (bp->rx_desc_ring) { + pci_free_consistent(bp->pdev, + sizeof(struct rx_bd) * RX_DESC_CNT, + bp->rx_desc_ring, bp->rx_desc_mapping); + bp->rx_desc_ring = NULL; + } + if (bp->rx_buf_ring) { + kfree(bp->rx_buf_ring); + bp->rx_buf_ring = NULL; + } +} + +static int +bnx2_alloc_mem(struct bnx2 *bp) +{ + bp->tx_buf_ring = kmalloc(sizeof(struct sw_bd) * TX_DESC_CNT, + GFP_KERNEL); + if (bp->tx_buf_ring == NULL) + return -ENOMEM; + + memset(bp->tx_buf_ring, 0, sizeof(struct sw_bd) * TX_DESC_CNT); + bp->tx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct tx_bd) * + TX_DESC_CNT, + &bp->tx_desc_mapping); + if (bp->tx_desc_ring == NULL) + goto alloc_mem_err; + + bp->rx_buf_ring = kmalloc(sizeof(struct sw_bd) * RX_DESC_CNT, + GFP_KERNEL); + if (bp->rx_buf_ring == NULL) + goto alloc_mem_err; + + memset(bp->rx_buf_ring, 0, sizeof(struct sw_bd) * RX_DESC_CNT); + bp->rx_desc_ring = pci_alloc_consistent(bp->pdev, + sizeof(struct rx_bd) * + RX_DESC_CNT, + &bp->rx_desc_mapping); + if (bp->rx_desc_ring == NULL) + goto alloc_mem_err; + + bp->status_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct status_block), + &bp->status_blk_mapping); + if (bp->status_blk == NULL) + goto alloc_mem_err; + + memset(bp->status_blk, 0, sizeof(struct status_block)); + + bp->stats_blk = pci_alloc_consistent(bp->pdev, + sizeof(struct statistics_block), + &bp->stats_blk_mapping); + if (bp->stats_blk == NULL) + goto alloc_mem_err; + + memset(bp->stats_blk, 0, sizeof(struct statistics_block)); + + return 0; + +alloc_mem_err: + bnx2_free_mem(bp); + return -ENOMEM; +} + +static void +bnx2_report_link(struct bnx2 *bp) +{ + if (bp->link_up) { + netif_carrier_on(bp->dev); + printk(KERN_INFO PFX "%s NIC Link is Up, ", bp->dev->name); + + printk("%d Mbps ", bp->line_speed); + + if (bp->duplex == DUPLEX_FULL) + printk("full duplex"); + else + printk("half duplex"); + + if (bp->flow_ctrl) { + if (bp->flow_ctrl & FLOW_CTRL_RX) { + printk(", receive "); + if (bp->flow_ctrl & FLOW_CTRL_TX) + printk("& transmit "); + } + else { + printk(", transmit "); + } + printk("flow control ON"); + } + printk("\n"); + } + else { + netif_carrier_off(bp->dev); + printk(KERN_ERR PFX "%s NIC Link is Down\n", bp->dev->name); + } +} + +static void +bnx2_resolve_flow_ctrl(struct bnx2 *bp) +{ + u32 local_adv, remote_adv; + + bp->flow_ctrl = 0; + if ((bp->autoneg & (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) != + (AUTONEG_SPEED | AUTONEG_FLOW_CTRL)) { + + if (bp->duplex == DUPLEX_FULL) { + bp->flow_ctrl = bp->req_flow_ctrl; + } + return; + } + + if (bp->duplex != DUPLEX_FULL) { + return; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + if (bp->phy_flags & PHY_SERDES_FLAG) { + u32 new_local_adv = 0; + u32 new_remote_adv = 0; + + if (local_adv & ADVERTISE_1000XPAUSE) + new_local_adv |= ADVERTISE_PAUSE_CAP; + if (local_adv & ADVERTISE_1000XPSE_ASYM) + new_local_adv |= ADVERTISE_PAUSE_ASYM; + if (remote_adv & ADVERTISE_1000XPAUSE) + new_remote_adv |= ADVERTISE_PAUSE_CAP; + if (remote_adv & ADVERTISE_1000XPSE_ASYM) + new_remote_adv |= ADVERTISE_PAUSE_ASYM; + + local_adv = new_local_adv; + remote_adv = new_remote_adv; + } + + /* See Table 28B-3 of 802.3ab-1999 spec. */ + if (local_adv & ADVERTISE_PAUSE_CAP) { + if(local_adv & ADVERTISE_PAUSE_ASYM) { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + else if (remote_adv & ADVERTISE_PAUSE_ASYM) { + bp->flow_ctrl = FLOW_CTRL_RX; + } + } + else { + if (remote_adv & ADVERTISE_PAUSE_CAP) { + bp->flow_ctrl = FLOW_CTRL_TX | FLOW_CTRL_RX; + } + } + } + else if (local_adv & ADVERTISE_PAUSE_ASYM) { + if ((remote_adv & ADVERTISE_PAUSE_CAP) && + (remote_adv & ADVERTISE_PAUSE_ASYM)) { + + bp->flow_ctrl = FLOW_CTRL_TX; + } + } +} + +static int +bnx2_serdes_linkup(struct bnx2 *bp) +{ + u32 bmcr, local_adv, remote_adv, common; + + bp->link_up = 1; + bp->line_speed = SPEED_1000; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + + if (!(bmcr & BMCR_ANENABLE)) { + return 0; + } + + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & (ADVERTISE_1000XHALF | ADVERTISE_1000XFULL)) { + + if (common & ADVERTISE_1000XFULL) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_copper_linkup(struct bnx2 *bp) +{ + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (bmcr & BMCR_ANENABLE) { + u32 local_adv, remote_adv, common; + + bnx2_read_phy(bp, MII_CTRL1000, &local_adv); + bnx2_read_phy(bp, MII_STAT1000, &remote_adv); + + common = local_adv & (remote_adv >> 2); + if (common & ADVERTISE_1000FULL) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_1000HALF) { + bp->line_speed = SPEED_1000; + bp->duplex = DUPLEX_HALF; + } + else { + bnx2_read_phy(bp, MII_ADVERTISE, &local_adv); + bnx2_read_phy(bp, MII_LPA, &remote_adv); + + common = local_adv & remote_adv; + if (common & ADVERTISE_100FULL) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_100HALF) { + bp->line_speed = SPEED_100; + bp->duplex = DUPLEX_HALF; + } + else if (common & ADVERTISE_10FULL) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_FULL; + } + else if (common & ADVERTISE_10HALF) { + bp->line_speed = SPEED_10; + bp->duplex = DUPLEX_HALF; + } + else { + bp->line_speed = 0; + bp->link_up = 0; + } + } + } + else { + if (bmcr & BMCR_SPEED100) { + bp->line_speed = SPEED_100; + } + else { + bp->line_speed = SPEED_10; + } + if (bmcr & BMCR_FULLDPLX) { + bp->duplex = DUPLEX_FULL; + } + else { + bp->duplex = DUPLEX_HALF; + } + } + + return 0; +} + +static int +bnx2_set_mac_link(struct bnx2 *bp) +{ + u32 val; + + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x2620); + if (bp->link_up && (bp->line_speed == SPEED_1000) && + (bp->duplex == DUPLEX_HALF)) { + REG_WR(bp, BNX2_EMAC_TX_LENGTHS, 0x26ff); + } + + /* Configure the EMAC mode register. */ + val = REG_RD(bp, BNX2_EMAC_MODE); + + val &= ~(BNX2_EMAC_MODE_PORT | BNX2_EMAC_MODE_HALF_DUPLEX | + BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK); + + if (bp->link_up) { + if (bp->line_speed != SPEED_1000) + val |= BNX2_EMAC_MODE_PORT_MII; + else + val |= BNX2_EMAC_MODE_PORT_GMII; + } + else { + val |= BNX2_EMAC_MODE_PORT_GMII; + } + + /* Set the MAC to operate in the appropriate duplex mode. */ + if (bp->duplex == DUPLEX_HALF) + val |= BNX2_EMAC_MODE_HALF_DUPLEX; + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* Enable/disable rx PAUSE. */ + bp->rx_mode &= ~BNX2_EMAC_RX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_RX) + bp->rx_mode |= BNX2_EMAC_RX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_RX_MODE, bp->rx_mode); + + /* Enable/disable tx PAUSE. */ + val = REG_RD(bp, BNX2_EMAC_TX_MODE); + val &= ~BNX2_EMAC_TX_MODE_FLOW_EN; + + if (bp->flow_ctrl & FLOW_CTRL_TX) + val |= BNX2_EMAC_TX_MODE_FLOW_EN; + REG_WR(bp, BNX2_EMAC_TX_MODE, val); + + /* Acknowledge the interrupt. */ + REG_WR(bp, BNX2_EMAC_STATUS, BNX2_EMAC_STATUS_LINK_CHANGE); + + return 0; +} + +static int +bnx2_set_link(struct bnx2 *bp) +{ + u32 bmsr; + u8 link_up; + + if (bp->loopback == MAC_LOOPBACK) { + bp->link_up = 1; + return 0; + } + + link_up = bp->link_up; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + u32 val; + + val = REG_RD(bp, BNX2_EMAC_STATUS); + if (val & BNX2_EMAC_STATUS_LINK) + bmsr |= BMSR_LSTATUS; + else + bmsr &= ~BMSR_LSTATUS; + } + + if (bmsr & BMSR_LSTATUS) { + bp->link_up = 1; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_serdes_linkup(bp); + } + else { + bnx2_copper_linkup(bp); + } + bnx2_resolve_flow_ctrl(bp); + } + else { + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (bp->autoneg & AUTONEG_SPEED)) { + + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + if (!(bmcr & BMCR_ANENABLE)) { + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANENABLE); + } + } + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + bp->link_up = 0; + } + + if (bp->link_up != link_up) { + bnx2_report_link(bp); + } + + bnx2_set_mac_link(bp); + + return 0; +} + +static int +bnx2_reset_phy(struct bnx2 *bp) +{ + int i; + u32 reg; + + bnx2_write_phy(bp, MII_BMCR, BMCR_RESET); + +#define PHY_RESET_MAX_WAIT 100 + for (i = 0; i < PHY_RESET_MAX_WAIT; i++) { + udelay(10); + + bnx2_read_phy(bp, MII_BMCR, ®); + if (!(reg & BMCR_RESET)) { + udelay(20); + break; + } + } + if (i == PHY_RESET_MAX_WAIT) { + return -EBUSY; + } + return 0; +} + +static u32 +bnx2_phy_get_pause_adv(struct bnx2 *bp) +{ + u32 adv = 0; + + if ((bp->req_flow_ctrl & (FLOW_CTRL_RX | FLOW_CTRL_TX)) == + (FLOW_CTRL_RX | FLOW_CTRL_TX)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE; + } + else { + adv = ADVERTISE_PAUSE_CAP; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_TX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_ASYM; + } + } + else if (bp->req_flow_ctrl & FLOW_CTRL_RX) { + if (bp->phy_flags & PHY_SERDES_FLAG) { + adv = ADVERTISE_1000XPAUSE | ADVERTISE_1000XPSE_ASYM; + } + else { + adv = ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM; + } + } + return adv; +} + +static int +bnx2_setup_serdes_phy(struct bnx2 *bp) +{ + u32 adv, bmcr; + u32 new_adv = 0; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + new_bmcr = bmcr & ~BMCR_ANENABLE; + new_bmcr |= BMCR_SPEED1000; + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + else { + new_bmcr &= ~BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + adv &= ~(ADVERTISE_1000XFULL | + ADVERTISE_1000XHALF); + bnx2_write_phy(bp, MII_ADVERTISE, adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | + BMCR_ANRESTART | BMCR_ANENABLE); + + bp->link_up = 0; + netif_carrier_off(bp->dev); + } + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + } + return 0; + } + + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv |= ADVERTISE_1000XFULL; + + new_adv |= bnx2_phy_get_pause_adv(bp); + + bnx2_read_phy(bp, MII_ADVERTISE, &adv); + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + bp->serdes_an_pending = 0; + if ((adv != new_adv) || ((bmcr & BMCR_ANENABLE) == 0)) { + /* Force a link down visible on the other side */ + if (bp->link_up) { + int i; + + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + for (i = 0; i < 110; i++) { + udelay(100); + } + } + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv); + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | + BMCR_ANENABLE); + bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval; + } + + return 0; +} + +#define ETHTOOL_ALL_FIBRE_SPEED \ + (ADVERTISED_1000baseT_Full) + +#define ETHTOOL_ALL_COPPER_SPEED \ + (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \ + ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \ + ADVERTISED_1000baseT_Full) + +#define PHY_ALL_10_100_SPEED (ADVERTISE_10HALF | ADVERTISE_10FULL | \ + ADVERTISE_100HALF | ADVERTISE_100FULL | ADVERTISE_CSMA) + +#define PHY_ALL_1000_SPEED (ADVERTISE_1000HALF | ADVERTISE_1000FULL) + +static int +bnx2_setup_copper_phy(struct bnx2 *bp) +{ + u32 bmcr; + u32 new_bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bp->autoneg & AUTONEG_SPEED) { + u32 adv_reg, adv1000_reg; + u32 new_adv_reg = 0; + u32 new_adv1000_reg = 0; + + bnx2_read_phy(bp, MII_ADVERTISE, &adv_reg); + adv_reg &= (PHY_ALL_10_100_SPEED | ADVERTISE_PAUSE_CAP | + ADVERTISE_PAUSE_ASYM); + + bnx2_read_phy(bp, MII_CTRL1000, &adv1000_reg); + adv1000_reg &= PHY_ALL_1000_SPEED; + + if (bp->advertising & ADVERTISED_10baseT_Half) + new_adv_reg |= ADVERTISE_10HALF; + if (bp->advertising & ADVERTISED_10baseT_Full) + new_adv_reg |= ADVERTISE_10FULL; + if (bp->advertising & ADVERTISED_100baseT_Half) + new_adv_reg |= ADVERTISE_100HALF; + if (bp->advertising & ADVERTISED_100baseT_Full) + new_adv_reg |= ADVERTISE_100FULL; + if (bp->advertising & ADVERTISED_1000baseT_Full) + new_adv1000_reg |= ADVERTISE_1000FULL; + + new_adv_reg |= ADVERTISE_CSMA; + + new_adv_reg |= bnx2_phy_get_pause_adv(bp); + + if ((adv1000_reg != new_adv1000_reg) || + (adv_reg != new_adv_reg) || + ((bmcr & BMCR_ANENABLE) == 0)) { + + bnx2_write_phy(bp, MII_ADVERTISE, new_adv_reg); + bnx2_write_phy(bp, MII_CTRL1000, new_adv1000_reg); + bnx2_write_phy(bp, MII_BMCR, BMCR_ANRESTART | + BMCR_ANENABLE); + } + else if (bp->link_up) { + /* Flow ctrl may have changed from auto to forced */ + /* or vice-versa. */ + + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + return 0; + } + + new_bmcr = 0; + if (bp->req_line_speed == SPEED_100) { + new_bmcr |= BMCR_SPEED100; + } + if (bp->req_duplex == DUPLEX_FULL) { + new_bmcr |= BMCR_FULLDPLX; + } + if (new_bmcr != bmcr) { + u32 bmsr; + int i = 0; + + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + + if (bmsr & BMSR_LSTATUS) { + /* Force link down */ + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + do { + udelay(100); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + i++; + } while ((bmsr & BMSR_LSTATUS) && (i < 620)); + } + + bnx2_write_phy(bp, MII_BMCR, new_bmcr); + + /* Normally, the new speed is setup after the link has + * gone down and up again. In some cases, link will not go + * down so we need to set up the new speed here. + */ + if (bmsr & BMSR_LSTATUS) { + bp->line_speed = bp->req_line_speed; + bp->duplex = bp->req_duplex; + bnx2_resolve_flow_ctrl(bp); + bnx2_set_mac_link(bp); + } + } + return 0; +} + +static int +bnx2_setup_phy(struct bnx2 *bp) +{ + if (bp->loopback == MAC_LOOPBACK) + return 0; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + return (bnx2_setup_serdes_phy(bp)); + } + else { + return (bnx2_setup_copper_phy(bp)); + } +} + +static int +bnx2_init_serdes_phy(struct bnx2 *bp) +{ + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + REG_WR(bp, BNX2_MISC_UNUSED0, 0x300); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, (val & 0xfff8) | 0x4000); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3ff) | 0xec02); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_write_phy(bp, 0x1c, 0x6c00); + bnx2_read_phy(bp, 0x1c, &val); + bnx2_write_phy(bp, 0x1c, (val & 0x3fd) | 0xec00); + } + + return 0; +} + +static int +bnx2_init_copper_phy(struct bnx2 *bp) +{ + bp->phy_flags |= PHY_CRC_FIX_FLAG; + + if (bp->phy_flags & PHY_CRC_FIX_FLAG) { + bnx2_write_phy(bp, 0x18, 0x0c00); + bnx2_write_phy(bp, 0x17, 0x000a); + bnx2_write_phy(bp, 0x15, 0x310b); + bnx2_write_phy(bp, 0x17, 0x201f); + bnx2_write_phy(bp, 0x15, 0x9506); + bnx2_write_phy(bp, 0x17, 0x401f); + bnx2_write_phy(bp, 0x15, 0x14e2); + bnx2_write_phy(bp, 0x18, 0x0400); + } + + if (bp->dev->mtu > 1500) { + u32 val; + + /* Set extended packet length bit */ + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val | 0x4000); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val | 0x1); + } + else { + u32 val; + + bnx2_write_phy(bp, 0x18, 0x7); + bnx2_read_phy(bp, 0x18, &val); + bnx2_write_phy(bp, 0x18, val & ~0x4007); + + bnx2_read_phy(bp, 0x10, &val); + bnx2_write_phy(bp, 0x10, val & ~0x1); + } + + return 0; +} + + +static int +bnx2_init_phy(struct bnx2 *bp) +{ + u32 val; + int rc = 0; + + bp->phy_flags &= ~PHY_INT_MODE_MASK_FLAG; + bp->phy_flags |= PHY_INT_MODE_LINK_READY_FLAG; + + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + bnx2_reset_phy(bp); + + bnx2_read_phy(bp, MII_PHYSID1, &val); + bp->phy_id = val << 16; + bnx2_read_phy(bp, MII_PHYSID2, &val); + bp->phy_id |= val & 0xffff; + + if (bp->phy_flags & PHY_SERDES_FLAG) { + rc = bnx2_init_serdes_phy(bp); + } + else { + rc = bnx2_init_copper_phy(bp); + } + + bnx2_setup_phy(bp); + + return rc; +} + +static int +bnx2_set_mac_loopback(struct bnx2 *bp) +{ + u32 mac_mode; + + mac_mode = REG_RD(bp, BNX2_EMAC_MODE); + mac_mode &= ~BNX2_EMAC_MODE_PORT; + mac_mode |= BNX2_EMAC_MODE_MAC_LOOP | BNX2_EMAC_MODE_FORCE_LINK; + REG_WR(bp, BNX2_EMAC_MODE, mac_mode); + bp->link_up = 1; + return 0; +} + +static int +bnx2_fw_sync(struct bnx2 *bp, u32 msg_data) +{ + int i; + u32 val; + + if (bp->fw_timed_out) + return -EBUSY; + + bp->fw_wr_seq++; + msg_data |= bp->fw_wr_seq; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + /* wait for an acknowledgement. */ + for (i = 0; i < (FW_ACK_TIME_OUT_MS * 1000)/5; i++) { + udelay(5); + + val = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_FW_MB); + + if ((val & BNX2_FW_MSG_ACK) == (msg_data & BNX2_DRV_MSG_SEQ)) + break; + } + + /* If we timed out, inform the firmware that this is the case. */ + if (((val & BNX2_FW_MSG_ACK) != (msg_data & BNX2_DRV_MSG_SEQ)) && + ((msg_data & BNX2_DRV_MSG_DATA) != BNX2_DRV_MSG_DATA_WAIT0)) { + + msg_data &= ~BNX2_DRV_MSG_CODE; + msg_data |= BNX2_DRV_MSG_CODE_FW_TIMEOUT; + + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_MB, msg_data); + + bp->fw_timed_out = 1; + + return -EBUSY; + } + + return 0; +} + +static void +bnx2_init_context(struct bnx2 *bp) +{ + u32 vcid; + + vcid = 96; + while (vcid) { + u32 vcid_addr, pcid_addr, offset; + + vcid--; + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + u32 new_vcid; + + vcid_addr = GET_PCID_ADDR(vcid); + if (vcid & 0x8) { + new_vcid = 0x60 + (vcid & 0xf0) + (vcid & 0x7); + } + else { + new_vcid = vcid; + } + pcid_addr = GET_PCID_ADDR(new_vcid); + } + else { + vcid_addr = GET_CID_ADDR(vcid); + pcid_addr = vcid_addr; + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, 0x00); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + + /* Zero out the context. */ + for (offset = 0; offset < PHY_CTX_SIZE; offset += 4) { + CTX_WR(bp, 0x00, offset, 0); + } + + REG_WR(bp, BNX2_CTX_VIRT_ADDR, vcid_addr); + REG_WR(bp, BNX2_CTX_PAGE_TBL, pcid_addr); + } +} + +static int +bnx2_alloc_bad_rbuf(struct bnx2 *bp) +{ + u16 *good_mbuf; + u32 good_mbuf_cnt; + u32 val; + + good_mbuf = kmalloc(512 * sizeof(u16), GFP_KERNEL); + if (good_mbuf == NULL) { + printk(KERN_ERR PFX "Failed to allocate memory in " + "bnx2_alloc_bad_rbuf\n"); + return -ENOMEM; + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE); + + good_mbuf_cnt = 0; + + /* Allocate a bunch of mbufs and save the good ones in an array. */ + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + while (val & BNX2_RBUF_STATUS1_FREE_COUNT) { + REG_WR_IND(bp, BNX2_RBUF_COMMAND, BNX2_RBUF_COMMAND_ALLOC_REQ); + + val = REG_RD_IND(bp, BNX2_RBUF_FW_BUF_ALLOC); + + val &= BNX2_RBUF_FW_BUF_ALLOC_VALUE; + + /* The addresses with Bit 9 set are bad memory blocks. */ + if (!(val & (1 << 9))) { + good_mbuf[good_mbuf_cnt] = (u16) val; + good_mbuf_cnt++; + } + + val = REG_RD_IND(bp, BNX2_RBUF_STATUS1); + } + + /* Free the good ones back to the mbuf pool thus discarding + * all the bad ones. */ + while (good_mbuf_cnt) { + good_mbuf_cnt--; + + val = good_mbuf[good_mbuf_cnt]; + val = (val << 9) | val | 1; + + REG_WR_IND(bp, BNX2_RBUF_FW_BUF_FREE, val); + } + kfree(good_mbuf); + return 0; +} + +static void +bnx2_set_mac_addr(struct bnx2 *bp) +{ + u32 val; + u8 *mac_addr = bp->dev->dev_addr; + + val = (mac_addr[0] << 8) | mac_addr[1]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH0, val); + + val = (mac_addr[2] << 24) | (mac_addr[3] << 16) | + (mac_addr[4] << 8) | mac_addr[5]; + + REG_WR(bp, BNX2_EMAC_MAC_MATCH1, val); +} + +static inline int +bnx2_alloc_rx_skb(struct bnx2 *bp, u16 index) +{ + struct sk_buff *skb; + struct sw_bd *rx_buf = &bp->rx_buf_ring[index]; + dma_addr_t mapping; + struct rx_bd *rxbd = &bp->rx_desc_ring[index]; + unsigned long align; + + skb = dev_alloc_skb(bp->rx_buf_size); + if (skb == NULL) { + return -ENOMEM; + } + + if (unlikely((align = (unsigned long) skb->data & 0x7))) { + skb_reserve(skb, 8 - align); + } + + skb->dev = bp->dev; + mapping = pci_map_single(bp->pdev, skb->data, bp->rx_buf_use_size, + PCI_DMA_FROMDEVICE); + + rx_buf->skb = skb; + pci_unmap_addr_set(rx_buf, mapping, mapping); + + rxbd->rx_bd_haddr_hi = (u64) mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) mapping & 0xffffffff; + + bp->rx_prod_bseq += bp->rx_buf_use_size; + + return 0; +} + +static void +bnx2_phy_int(struct bnx2 *bp) +{ + u32 new_link_state, old_link_state; + + new_link_state = bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE; + old_link_state = bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE; + if (new_link_state != old_link_state) { + if (new_link_state) { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_SET_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + else { + REG_WR(bp, BNX2_PCICFG_STATUS_BIT_CLEAR_CMD, + STATUS_ATTN_BITS_LINK_STATE); + } + bnx2_set_link(bp); + } +} + +static void +bnx2_tx_int(struct bnx2 *bp) +{ + u16 hw_cons, sw_cons, sw_ring_cons; + int tx_free_bd = 0; + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->tx_cons; + + while (sw_cons != hw_cons) { + struct sw_bd *tx_buf; + struct sk_buff *skb; + int i, last; + + sw_ring_cons = TX_RING_IDX(sw_cons); + + tx_buf = &bp->tx_buf_ring[sw_ring_cons]; + skb = tx_buf->skb; +#ifdef BCM_TSO + /* partial BD completions possible with TSO packets */ + if (skb_shinfo(skb)->tso_size) { + u16 last_idx, last_ring_idx; + + last_idx = sw_cons + + skb_shinfo(skb)->nr_frags + 1; + last_ring_idx = sw_ring_cons + + skb_shinfo(skb)->nr_frags + 1; + if (unlikely(last_ring_idx >= MAX_TX_DESC_CNT)) { + last_idx++; + } + if (((s16) ((s16) last_idx - (s16) hw_cons)) > 0) { + break; + } + } +#endif + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + last = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last; i++) { + sw_cons = NEXT_TX_BD(sw_cons); + + pci_unmap_page(bp->pdev, + pci_unmap_addr( + &bp->tx_buf_ring[TX_RING_IDX(sw_cons)], + mapping), + skb_shinfo(skb)->frags[i].size, + PCI_DMA_TODEVICE); + } + + sw_cons = NEXT_TX_BD(sw_cons); + + tx_free_bd += last + 1; + + dev_kfree_skb_irq(skb); + + hw_cons = bp->status_blk->status_tx_quick_consumer_index0; + if ((hw_cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT) { + hw_cons++; + } + } + + atomic_add(tx_free_bd, &bp->tx_avail_bd); + + if (unlikely(netif_queue_stopped(bp->dev))) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if ((netif_queue_stopped(bp->dev)) && + (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) { + + netif_wake_queue(bp->dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + bp->tx_cons = sw_cons; + +} + +static inline void +bnx2_reuse_rx_skb(struct bnx2 *bp, struct sk_buff *skb, + u16 cons, u16 prod) +{ + struct sw_bd *cons_rx_buf = &bp->rx_buf_ring[cons]; + struct sw_bd *prod_rx_buf = &bp->rx_buf_ring[prod]; + struct rx_bd *cons_bd = &bp->rx_desc_ring[cons]; + struct rx_bd *prod_bd = &bp->rx_desc_ring[prod]; + + pci_dma_sync_single_for_device(bp->pdev, + pci_unmap_addr(cons_rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + prod_rx_buf->skb = cons_rx_buf->skb; + pci_unmap_addr_set(prod_rx_buf, mapping, + pci_unmap_addr(cons_rx_buf, mapping)); + + memcpy(prod_bd, cons_bd, 8); + + bp->rx_prod_bseq += bp->rx_buf_use_size; + +} + +static int +bnx2_rx_int(struct bnx2 *bp, int budget) +{ + u16 hw_cons, sw_cons, sw_ring_cons, sw_prod, sw_ring_prod; + struct l2_fhdr *rx_hdr; + int rx_pkt = 0; + + hw_cons = bp->status_blk->status_rx_quick_consumer_index0; + if ((hw_cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT) { + hw_cons++; + } + sw_cons = bp->rx_cons; + sw_prod = bp->rx_prod; + + /* Memory barrier necessary as speculative reads of the rx + * buffer can be ahead of the index in the status block + */ + rmb(); + while (sw_cons != hw_cons) { + unsigned int len; + u16 status; + struct sw_bd *rx_buf; + struct sk_buff *skb; + + sw_ring_cons = RX_RING_IDX(sw_cons); + sw_ring_prod = RX_RING_IDX(sw_prod); + + rx_buf = &bp->rx_buf_ring[sw_ring_cons]; + skb = rx_buf->skb; + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_offset + RX_COPY_THRESH, PCI_DMA_FROMDEVICE); + + rx_hdr = (struct l2_fhdr *) skb->data; + len = rx_hdr->l2_fhdr_pkt_len - 4; + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto reuse_rx; + } + + /* Since we don't have a jumbo ring, copy small packets + * if mtu > 1500 + */ + if ((bp->dev->mtu > 1500) && (len <= RX_COPY_THRESH)) { + struct sk_buff *new_skb; + + new_skb = dev_alloc_skb(len + 2); + if (new_skb == NULL) + goto reuse_rx; + + /* aligned copy */ + memcpy(new_skb->data, + skb->data + bp->rx_offset - 2, + len + 2); + + skb_reserve(new_skb, 2); + skb_put(new_skb, len); + new_skb->dev = bp->dev; + + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + + skb = new_skb; + } + else if (bnx2_alloc_rx_skb(bp, sw_ring_prod) == 0) { + pci_unmap_single(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + skb_reserve(skb, bp->rx_offset); + skb_put(skb, len); + } + else { +reuse_rx: + bnx2_reuse_rx_skb(bp, skb, + sw_ring_cons, sw_ring_prod); + goto next_rx; + } + + skb->protocol = eth_type_trans(skb, bp->dev); + + if ((len > (bp->dev->mtu + ETH_HLEN)) && + (htons(skb->protocol) != 0x8100)) { + + dev_kfree_skb_irq(skb); + goto next_rx; + + } + + status = rx_hdr->l2_fhdr_status; + skb->ip_summed = CHECKSUM_NONE; + if (bp->rx_csum && + (status & (L2_FHDR_STATUS_TCP_SEGMENT | + L2_FHDR_STATUS_UDP_DATAGRAM))) { + + u16 cksum = rx_hdr->l2_fhdr_tcp_udp_xsum; + + if (cksum == 0xffff) + skb->ip_summed = CHECKSUM_UNNECESSARY; + } + +#ifdef BCM_VLAN + if ((status & L2_FHDR_STATUS_L2_VLAN_TAG) && (bp->vlgrp != 0)) { + vlan_hwaccel_receive_skb(skb, bp->vlgrp, + rx_hdr->l2_fhdr_vlan_tag); + } + else +#endif + netif_receive_skb(skb); + + bp->dev->last_rx = jiffies; + rx_pkt++; + +next_rx: + rx_buf->skb = NULL; + + sw_cons = NEXT_RX_BD(sw_cons); + sw_prod = NEXT_RX_BD(sw_prod); + + if ((rx_pkt == budget)) + break; + } + bp->rx_cons = sw_cons; + bp->rx_prod = sw_prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, sw_prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); + + mmiowb(); + + return rx_pkt; + +} + +/* MSI ISR - The only difference between this and the INTx ISR + * is that the MSI interrupt is always serviced. + */ +static irqreturn_t +bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static irqreturn_t +bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs) +{ + struct net_device *dev = dev_instance; + struct bnx2 *bp = dev->priv; + + /* When using INTx, it is possible for the interrupt to arrive + * at the CPU before the status block posted prior to the + * interrupt. Reading a register will flush the status block. + * When using MSI, the MSI message will always complete after + * the status block write. + */ + if ((bp->status_blk->status_idx == bp->last_status_idx) || + (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) & + BNX2_PCICFG_MISC_STATUS_INTA_VALUE)) + return IRQ_RETVAL(0); + + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM | + BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + /* Return here if interrupt is shared and is disabled. */ + if (unlikely(atomic_read(&bp->intr_sem) != 0)) { + return IRQ_RETVAL(1); + } + + if (netif_rx_schedule_prep(dev)) { + __netif_rx_schedule(dev); + } + + return IRQ_RETVAL(1); +} + +static int +bnx2_poll(struct net_device *dev, int *budget) +{ + struct bnx2 *bp = dev->priv; + int rx_done = 1; + + bp->last_status_idx = bp->status_blk->status_idx; + + rmb(); + if ((bp->status_blk->status_attn_bits & + STATUS_ATTN_BITS_LINK_STATE) != + (bp->status_blk->status_attn_bits_ack & + STATUS_ATTN_BITS_LINK_STATE)) { + + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + bnx2_phy_int(bp); + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + + if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) { + bnx2_tx_int(bp); + } + + if (bp->status_blk->status_rx_quick_consumer_index0 != bp->rx_cons) { + int orig_budget = *budget; + int work_done; + + if (orig_budget > dev->quota) + orig_budget = dev->quota; + + work_done = bnx2_rx_int(bp, orig_budget); + *budget -= work_done; + dev->quota -= work_done; + + if (work_done >= orig_budget) { + rx_done = 0; + } + } + + if (rx_done) { + netif_rx_complete(dev); + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, + BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID | + bp->last_status_idx); + return 0; + } + + return 1; +} + +/* Called with rtnl_lock from vlan functions and also dev->xmit_lock + * from set_multicast. + */ +static void +bnx2_set_rx_mode(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 rx_mode, sort_mode; + int i; + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + + rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS | + BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG); + sort_mode = 1 | BNX2_RPM_SORT_USER0_BC_EN; +#ifdef BCM_VLAN + if (!bp->vlgrp) { + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; + } +#else + rx_mode |= BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG; +#endif + if (dev->flags & IFF_PROMISC) { + /* Promiscuous mode. */ + rx_mode |= BNX2_EMAC_RX_MODE_PROMISCUOUS; + sort_mode |= BNX2_RPM_SORT_USER0_PROM_EN; + } + else if (dev->flags & IFF_ALLMULTI) { + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + sort_mode |= BNX2_RPM_SORT_USER0_MC_EN; + } + else { + /* Accept one or more multicast(s). */ + struct dev_mc_list *mclist; + u32 mc_filter[NUM_MC_HASH_REGISTERS]; + u32 regidx; + u32 bit; + u32 crc; + + memset(mc_filter, 0, 4 * NUM_MC_HASH_REGISTERS); + + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) { + + crc = ether_crc_le(ETH_ALEN, mclist->dmi_addr); + bit = crc & 0xff; + regidx = (bit & 0xe0) >> 5; + bit &= 0x1f; + mc_filter[regidx] |= (1 << bit); + } + + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + mc_filter[i]); + } + + sort_mode |= BNX2_RPM_SORT_USER0_MC_HSH_EN; + } + + if (rx_mode != bp->rx_mode) { + bp->rx_mode = rx_mode; + REG_WR(bp, BNX2_EMAC_RX_MODE, rx_mode); + } + + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode); + REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA); + + spin_unlock_irqrestore(&bp->phy_lock, flags); +} + +static void +load_rv2p_fw(struct bnx2 *bp, u32 *rv2p_code, u32 rv2p_code_len, + u32 rv2p_proc) +{ + int i; + u32 val; + + + for (i = 0; i < rv2p_code_len; i += 8) { + REG_WR(bp, BNX2_RV2P_INSTR_HIGH, *rv2p_code); + rv2p_code++; + REG_WR(bp, BNX2_RV2P_INSTR_LOW, *rv2p_code); + rv2p_code++; + + if (rv2p_proc == RV2P_PROC1) { + val = (i / 8) | BNX2_RV2P_PROC1_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC1_ADDR_CMD, val); + } + else { + val = (i / 8) | BNX2_RV2P_PROC2_ADDR_CMD_RDWR; + REG_WR(bp, BNX2_RV2P_PROC2_ADDR_CMD, val); + } + } + + /* Reset the processor, un-stall is done later. */ + if (rv2p_proc == RV2P_PROC1) { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC1_RESET); + } + else { + REG_WR(bp, BNX2_RV2P_COMMAND, BNX2_RV2P_COMMAND_PROC2_RESET); + } +} + +static void +load_cpu_fw(struct bnx2 *bp, struct cpu_reg *cpu_reg, struct fw_info *fw) +{ + u32 offset; + u32 val; + + /* Halt the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val |= cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->mode, val); + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + + /* Load the Text area. */ + offset = cpu_reg->spad_base + (fw->text_addr - cpu_reg->mips_view_base); + if (fw->text) { + int j; + + for (j = 0; j < (fw->text_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->text[j]); + } + } + + /* Load the Data area. */ + offset = cpu_reg->spad_base + (fw->data_addr - cpu_reg->mips_view_base); + if (fw->data) { + int j; + + for (j = 0; j < (fw->data_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->data[j]); + } + } + + /* Load the SBSS area. */ + offset = cpu_reg->spad_base + (fw->sbss_addr - cpu_reg->mips_view_base); + if (fw->sbss) { + int j; + + for (j = 0; j < (fw->sbss_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->sbss[j]); + } + } + + /* Load the BSS area. */ + offset = cpu_reg->spad_base + (fw->bss_addr - cpu_reg->mips_view_base); + if (fw->bss) { + int j; + + for (j = 0; j < (fw->bss_len/4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->bss[j]); + } + } + + /* Load the Read-Only area. */ + offset = cpu_reg->spad_base + + (fw->rodata_addr - cpu_reg->mips_view_base); + if (fw->rodata) { + int j; + + for (j = 0; j < (fw->rodata_len / 4); j++, offset += 4) { + REG_WR_IND(bp, offset, fw->rodata[j]); + } + } + + /* Clear the pre-fetch instruction. */ + REG_WR_IND(bp, cpu_reg->inst, 0); + REG_WR_IND(bp, cpu_reg->pc, fw->start_addr); + + /* Start the CPU. */ + val = REG_RD_IND(bp, cpu_reg->mode); + val &= ~cpu_reg->mode_value_halt; + REG_WR_IND(bp, cpu_reg->state, cpu_reg->state_value_clear); + REG_WR_IND(bp, cpu_reg->mode, val); +} + +static void +bnx2_init_cpus(struct bnx2 *bp) +{ + struct cpu_reg cpu_reg; + struct fw_info fw; + + /* Initialize the RV2P processor. */ + load_rv2p_fw(bp, bnx2_rv2p_proc1, sizeof(bnx2_rv2p_proc1), RV2P_PROC1); + load_rv2p_fw(bp, bnx2_rv2p_proc2, sizeof(bnx2_rv2p_proc2), RV2P_PROC2); + + /* Initialize the RX Processor. */ + cpu_reg.mode = BNX2_RXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_RXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_RXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_RXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_RXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_RXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_RXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_RXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_RXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_RXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_RXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_RXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_RXP_b06FwReleaseFix; + fw.start_addr = bnx2_RXP_b06FwStartAddr; + + fw.text_addr = bnx2_RXP_b06FwTextAddr; + fw.text_len = bnx2_RXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_RXP_b06FwText; + + fw.data_addr = bnx2_RXP_b06FwDataAddr; + fw.data_len = bnx2_RXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_RXP_b06FwData; + + fw.sbss_addr = bnx2_RXP_b06FwSbssAddr; + fw.sbss_len = bnx2_RXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_RXP_b06FwSbss; + + fw.bss_addr = bnx2_RXP_b06FwBssAddr; + fw.bss_len = bnx2_RXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_RXP_b06FwBss; + + fw.rodata_addr = bnx2_RXP_b06FwRodataAddr; + fw.rodata_len = bnx2_RXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_RXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Processor. */ + cpu_reg.mode = BNX2_TXP_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TXP_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TXP_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TXP_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TXP_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TXP_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TXP_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TXP_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TXP_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TXP_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TXP_b06FwReleaseMajor; + fw.ver_minor = bnx2_TXP_b06FwReleaseMinor; + fw.ver_fix = bnx2_TXP_b06FwReleaseFix; + fw.start_addr = bnx2_TXP_b06FwStartAddr; + + fw.text_addr = bnx2_TXP_b06FwTextAddr; + fw.text_len = bnx2_TXP_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TXP_b06FwText; + + fw.data_addr = bnx2_TXP_b06FwDataAddr; + fw.data_len = bnx2_TXP_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TXP_b06FwData; + + fw.sbss_addr = bnx2_TXP_b06FwSbssAddr; + fw.sbss_len = bnx2_TXP_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TXP_b06FwSbss; + + fw.bss_addr = bnx2_TXP_b06FwBssAddr; + fw.bss_len = bnx2_TXP_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TXP_b06FwBss; + + fw.rodata_addr = bnx2_TXP_b06FwRodataAddr; + fw.rodata_len = bnx2_TXP_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TXP_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the TX Patch-up Processor. */ + cpu_reg.mode = BNX2_TPAT_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_TPAT_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_TPAT_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_TPAT_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_TPAT_CPU_REG_FILE; + cpu_reg.evmask = BNX2_TPAT_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_TPAT_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_TPAT_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_TPAT_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_TPAT_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_TPAT_b06FwReleaseMajor; + fw.ver_minor = bnx2_TPAT_b06FwReleaseMinor; + fw.ver_fix = bnx2_TPAT_b06FwReleaseFix; + fw.start_addr = bnx2_TPAT_b06FwStartAddr; + + fw.text_addr = bnx2_TPAT_b06FwTextAddr; + fw.text_len = bnx2_TPAT_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_TPAT_b06FwText; + + fw.data_addr = bnx2_TPAT_b06FwDataAddr; + fw.data_len = bnx2_TPAT_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_TPAT_b06FwData; + + fw.sbss_addr = bnx2_TPAT_b06FwSbssAddr; + fw.sbss_len = bnx2_TPAT_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_TPAT_b06FwSbss; + + fw.bss_addr = bnx2_TPAT_b06FwBssAddr; + fw.bss_len = bnx2_TPAT_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_TPAT_b06FwBss; + + fw.rodata_addr = bnx2_TPAT_b06FwRodataAddr; + fw.rodata_len = bnx2_TPAT_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_TPAT_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + + /* Initialize the Completion Processor. */ + cpu_reg.mode = BNX2_COM_CPU_MODE; + cpu_reg.mode_value_halt = BNX2_COM_CPU_MODE_SOFT_HALT; + cpu_reg.mode_value_sstep = BNX2_COM_CPU_MODE_STEP_ENA; + cpu_reg.state = BNX2_COM_CPU_STATE; + cpu_reg.state_value_clear = 0xffffff; + cpu_reg.gpr0 = BNX2_COM_CPU_REG_FILE; + cpu_reg.evmask = BNX2_COM_CPU_EVENT_MASK; + cpu_reg.pc = BNX2_COM_CPU_PROGRAM_COUNTER; + cpu_reg.inst = BNX2_COM_CPU_INSTRUCTION; + cpu_reg.bp = BNX2_COM_CPU_HW_BREAKPOINT; + cpu_reg.spad_base = BNX2_COM_SCRATCH; + cpu_reg.mips_view_base = 0x8000000; + + fw.ver_major = bnx2_COM_b06FwReleaseMajor; + fw.ver_minor = bnx2_COM_b06FwReleaseMinor; + fw.ver_fix = bnx2_COM_b06FwReleaseFix; + fw.start_addr = bnx2_COM_b06FwStartAddr; + + fw.text_addr = bnx2_COM_b06FwTextAddr; + fw.text_len = bnx2_COM_b06FwTextLen; + fw.text_index = 0; + fw.text = bnx2_COM_b06FwText; + + fw.data_addr = bnx2_COM_b06FwDataAddr; + fw.data_len = bnx2_COM_b06FwDataLen; + fw.data_index = 0; + fw.data = bnx2_COM_b06FwData; + + fw.sbss_addr = bnx2_COM_b06FwSbssAddr; + fw.sbss_len = bnx2_COM_b06FwSbssLen; + fw.sbss_index = 0; + fw.sbss = bnx2_COM_b06FwSbss; + + fw.bss_addr = bnx2_COM_b06FwBssAddr; + fw.bss_len = bnx2_COM_b06FwBssLen; + fw.bss_index = 0; + fw.bss = bnx2_COM_b06FwBss; + + fw.rodata_addr = bnx2_COM_b06FwRodataAddr; + fw.rodata_len = bnx2_COM_b06FwRodataLen; + fw.rodata_index = 0; + fw.rodata = bnx2_COM_b06FwRodata; + + load_cpu_fw(bp, &cpu_reg, &fw); + +} + +static int +bnx2_set_power_state(struct bnx2 *bp, int state) +{ + u16 pmcsr; + + pci_read_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, &pmcsr); + + switch (state) { + case 0: { + u32 val; + + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + (pmcsr & ~PCI_PM_CTRL_STATE_MASK) | + PCI_PM_CTRL_PME_STATUS); + + if (pmcsr & PCI_PM_CTRL_STATE_MASK) + /* delay required during transition out of D3hot */ + msleep(20); + + val = REG_RD(bp, BNX2_EMAC_MODE); + val |= BNX2_EMAC_MODE_MPKT_RCVD | BNX2_EMAC_MODE_ACPI_RCVD; + val &= ~BNX2_EMAC_MODE_MPKT; + REG_WR(bp, BNX2_EMAC_MODE, val); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + break; + } + case 3: { + int i; + u32 val, wol_msg; + + if (bp->wol) { + u32 advertising; + u8 autoneg; + + autoneg = bp->autoneg; + advertising = bp->advertising; + + bp->autoneg = AUTONEG_SPEED; + bp->advertising = ADVERTISED_10baseT_Half | + ADVERTISED_10baseT_Full | + ADVERTISED_100baseT_Half | + ADVERTISED_100baseT_Full | + ADVERTISED_Autoneg; + + bnx2_setup_copper_phy(bp); + + bp->autoneg = autoneg; + bp->advertising = advertising; + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_EMAC_MODE); + + /* Enable port mode. */ + val &= ~BNX2_EMAC_MODE_PORT; + val |= BNX2_EMAC_MODE_PORT_MII | + BNX2_EMAC_MODE_MPKT_RCVD | + BNX2_EMAC_MODE_ACPI_RCVD | + BNX2_EMAC_MODE_FORCE_LINK | + BNX2_EMAC_MODE_MPKT; + + REG_WR(bp, BNX2_EMAC_MODE, val); + + /* receive all multicast */ + for (i = 0; i < NUM_MC_HASH_REGISTERS; i++) { + REG_WR(bp, BNX2_EMAC_MULTICAST_HASH0 + (i * 4), + 0xffffffff); + } + REG_WR(bp, BNX2_EMAC_RX_MODE, + BNX2_EMAC_RX_MODE_SORT_MODE); + + val = 1 | BNX2_RPM_SORT_USER0_BC_EN | + BNX2_RPM_SORT_USER0_MC_EN; + REG_WR(bp, BNX2_RPM_SORT_USER0, 0x0); + REG_WR(bp, BNX2_RPM_SORT_USER0, val); + REG_WR(bp, BNX2_RPM_SORT_USER0, val | + BNX2_RPM_SORT_USER0_ENA); + + /* Need to enable EMAC and RPM for WOL. */ + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE | + BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE); + + val = REG_RD(bp, BNX2_RPM_CONFIG); + val &= ~BNX2_RPM_CONFIG_ACPI_ENA; + REG_WR(bp, BNX2_RPM_CONFIG, val); + + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + } + else { + wol_msg = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + } + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT3 | wol_msg); + + pmcsr &= ~PCI_PM_CTRL_STATE_MASK; + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) { + + if (bp->wol) + pmcsr |= 3; + } + else { + pmcsr |= 3; + } + if (bp->wol) { + pmcsr |= PCI_PM_CTRL_PME_ENABLE; + } + pci_write_config_word(bp->pdev, bp->pm_cap + PCI_PM_CTRL, + pmcsr); + + /* No more memory access after this point until + * device is brought back to D0. + */ + udelay(50); + break; + } + default: + return -EINVAL; + } + return 0; +} + +static int +bnx2_acquire_nvram_lock(struct bnx2 *bp) +{ + u32 val; + int j; + + /* Request access to the flash interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_SET2); + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (val & BNX2_NVM_SW_ARB_ARB_ARB2) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_release_nvram_lock(struct bnx2 *bp) +{ + int j; + u32 val; + + /* Relinquish nvram interface. */ + REG_WR(bp, BNX2_NVM_SW_ARB, BNX2_NVM_SW_ARB_ARB_REQ_CLR2); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + val = REG_RD(bp, BNX2_NVM_SW_ARB); + if (!(val & BNX2_NVM_SW_ARB_ARB_ARB2)) + break; + + udelay(5); + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_enable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val | BNX2_MISC_CFG_NVM_WR_EN_PCI); + + if (!bp->flash_info->buffered) { + int j; + + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + REG_WR(bp, BNX2_NVM_COMMAND, + BNX2_NVM_COMMAND_WREN | BNX2_NVM_COMMAND_DOIT); + + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + } + return 0; +} + +static void +bnx2_disable_nvram_write(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, val & ~BNX2_MISC_CFG_NVM_WR_EN); +} + + +static void +bnx2_enable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Enable both bits, even on read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val | BNX2_NVM_ACCESS_ENABLE_EN | BNX2_NVM_ACCESS_ENABLE_WR_EN); +} + +static void +bnx2_disable_nvram_access(struct bnx2 *bp) +{ + u32 val; + + val = REG_RD(bp, BNX2_NVM_ACCESS_ENABLE); + /* Disable both bits, even after read. */ + REG_WR(bp, BNX2_NVM_ACCESS_ENABLE, + val & ~(BNX2_NVM_ACCESS_ENABLE_EN | + BNX2_NVM_ACCESS_ENABLE_WR_EN)); +} + +static int +bnx2_nvram_erase_page(struct bnx2 *bp, u32 offset) +{ + u32 cmd; + int j; + + if (bp->flash_info->buffered) + /* Buffered flash, no erase needed */ + return 0; + + /* Build an erase command */ + cmd = BNX2_NVM_COMMAND_ERASE | BNX2_NVM_COMMAND_WR | + BNX2_NVM_COMMAND_DOIT; + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue an erase command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) + break; + } + + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_nvram_read_dword(struct bnx2 *bp, u32 offset, u8 *ret_val, u32 cmd_flags) +{ + u32 cmd; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + /* Address of the NVRAM to read from. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue a read command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + u32 val; + + udelay(5); + + val = REG_RD(bp, BNX2_NVM_COMMAND); + if (val & BNX2_NVM_COMMAND_DONE) { + val = REG_RD(bp, BNX2_NVM_READ); + + val = be32_to_cpu(val); + memcpy(ret_val, &val, 4); + break; + } + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + + +static int +bnx2_nvram_write_dword(struct bnx2 *bp, u32 offset, u8 *val, u32 cmd_flags) +{ + u32 cmd, val32; + int j; + + /* Build the command word. */ + cmd = BNX2_NVM_COMMAND_DOIT | BNX2_NVM_COMMAND_WR | cmd_flags; + + /* Calculate an offset of a buffered flash. */ + if (bp->flash_info->buffered) { + offset = ((offset / bp->flash_info->page_size) << + bp->flash_info->page_bits) + + (offset % bp->flash_info->page_size); + } + + /* Need to clear DONE bit separately. */ + REG_WR(bp, BNX2_NVM_COMMAND, BNX2_NVM_COMMAND_DONE); + + memcpy(&val32, val, 4); + val32 = cpu_to_be32(val32); + + /* Write the data. */ + REG_WR(bp, BNX2_NVM_WRITE, val32); + + /* Address of the NVRAM to write to. */ + REG_WR(bp, BNX2_NVM_ADDR, offset & BNX2_NVM_ADDR_NVM_ADDR_VALUE); + + /* Issue the write command. */ + REG_WR(bp, BNX2_NVM_COMMAND, cmd); + + /* Wait for completion. */ + for (j = 0; j < NVRAM_TIMEOUT_COUNT; j++) { + udelay(5); + + if (REG_RD(bp, BNX2_NVM_COMMAND) & BNX2_NVM_COMMAND_DONE) + break; + } + if (j >= NVRAM_TIMEOUT_COUNT) + return -EBUSY; + + return 0; +} + +static int +bnx2_init_nvram(struct bnx2 *bp) +{ + u32 val; + int j, entry_count, rc; + struct flash_spec *flash; + + /* Determine the selected interface. */ + val = REG_RD(bp, BNX2_NVM_CFG1); + + entry_count = sizeof(flash_table) / sizeof(struct flash_spec); + + rc = 0; + if (val & 0x40000000) { + + /* Flash interface has been reconfigured */ + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if (val == flash->config1) { + bp->flash_info = flash; + break; + } + } + } + else { + /* Not yet been reconfigured */ + + for (j = 0, flash = &flash_table[0]; j < entry_count; + j++, flash++) { + + if ((val & FLASH_STRAP_MASK) == flash->strapping) { + bp->flash_info = flash; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + /* Reconfigure the flash interface */ + REG_WR(bp, BNX2_NVM_CFG1, flash->config1); + REG_WR(bp, BNX2_NVM_CFG2, flash->config2); + REG_WR(bp, BNX2_NVM_CFG3, flash->config3); + REG_WR(bp, BNX2_NVM_WRITE1, flash->write1); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + break; + } + } + } /* if (val & 0x40000000) */ + + if (j == entry_count) { + bp->flash_info = NULL; + printk(KERN_ALERT "Unknown flash/EEPROM type.\n"); + rc = -ENODEV; + } + + return rc; +} + +static int +bnx2_nvram_read(struct bnx2 *bp, u32 offset, u8 *ret_buf, + int buf_size) +{ + int rc = 0; + u32 cmd_flags, offset32, len32, extra; + + if (buf_size == 0) + return 0; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + return rc; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + len32 = buf_size; + offset32 = offset; + extra = 0; + + cmd_flags = 0; + + if (offset32 & 3) { + u8 buf[4]; + u32 pre_len; + + offset32 &= ~3; + pre_len = 4 - (offset & 3); + + if (pre_len >= len32) { + pre_len = len32; + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + } + else { + cmd_flags = BNX2_NVM_COMMAND_FIRST; + } + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + if (rc) + return rc; + + memcpy(ret_buf, buf + (offset & 3), pre_len); + + offset32 += 4; + ret_buf += pre_len; + len32 -= pre_len; + } + if (len32 & 3) { + extra = 4 - (len32 & 3); + len32 = (len32 + 4) & ~3; + } + + if (len32 == 4) { + u8 buf[4]; + + if (cmd_flags) + cmd_flags = BNX2_NVM_COMMAND_LAST; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST | + BNX2_NVM_COMMAND_LAST; + + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + else if (len32 > 0) { + u8 buf[4]; + + /* Read the first word. */ + if (cmd_flags) + cmd_flags = 0; + else + cmd_flags = BNX2_NVM_COMMAND_FIRST; + + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, cmd_flags); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + + while (len32 > 4 && rc == 0) { + rc = bnx2_nvram_read_dword(bp, offset32, ret_buf, 0); + + /* Advance to the next dword. */ + offset32 += 4; + ret_buf += 4; + len32 -= 4; + } + + if (rc) + return rc; + + cmd_flags = BNX2_NVM_COMMAND_LAST; + rc = bnx2_nvram_read_dword(bp, offset32, buf, cmd_flags); + + memcpy(ret_buf, buf, 4 - extra); + } + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + + bnx2_release_nvram_lock(bp); + + return rc; +} + +static int +bnx2_nvram_write(struct bnx2 *bp, u32 offset, u8 *data_buf, + int buf_size) +{ + u32 written, offset32, len32; + u8 *buf, start[4], end[4]; + int rc = 0; + int align_start, align_end; + + buf = data_buf; + offset32 = offset; + len32 = buf_size; + align_start = align_end = 0; + + if ((align_start = (offset32 & 3))) { + offset32 &= ~3; + len32 += align_start; + if ((rc = bnx2_nvram_read(bp, offset32, start, 4))) + return rc; + } + + if (len32 & 3) { + if ((len32 > 4) || !align_start) { + align_end = 4 - (len32 & 3); + len32 += align_end; + if ((rc = bnx2_nvram_read(bp, offset32 + len32 - 4, + end, 4))) { + return rc; + } + } + } + + if (align_start || align_end) { + buf = kmalloc(len32, GFP_KERNEL); + if (buf == 0) + return -ENOMEM; + if (align_start) { + memcpy(buf, start, 4); + } + if (align_end) { + memcpy(buf + len32 - 4, end, 4); + } + memcpy(buf + align_start, data_buf, buf_size); + } + + written = 0; + while ((written < len32) && (rc == 0)) { + u32 page_start, page_end, data_start, data_end; + u32 addr, cmd_flags; + int i; + u8 flash_buffer[264]; + + /* Find the page_start addr */ + page_start = offset32 + written; + page_start -= (page_start % bp->flash_info->page_size); + /* Find the page_end addr */ + page_end = page_start + bp->flash_info->page_size; + /* Find the data_start addr */ + data_start = (written == 0) ? offset32 : page_start; + /* Find the data_end addr */ + data_end = (page_end > offset32 + len32) ? + (offset32 + len32) : page_end; + + /* Request access to the flash interface. */ + if ((rc = bnx2_acquire_nvram_lock(bp)) != 0) + goto nvram_write_end; + + /* Enable access to flash interface */ + bnx2_enable_nvram_access(bp); + + cmd_flags = BNX2_NVM_COMMAND_FIRST; + if (bp->flash_info->buffered == 0) { + int j; + + /* Read the whole page into the buffer + * (non-buffer flash only) */ + for (j = 0; j < bp->flash_info->page_size; j += 4) { + if (j == (bp->flash_info->page_size - 4)) { + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_read_dword(bp, + page_start + j, + &flash_buffer[j], + cmd_flags); + + if (rc) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Enable writes to flash interface (unlock write-protect) */ + if ((rc = bnx2_enable_nvram_write(bp)) != 0) + goto nvram_write_end; + + /* Erase the page */ + if ((rc = bnx2_nvram_erase_page(bp, page_start)) != 0) + goto nvram_write_end; + + /* Re-enable the write again for the actual write */ + bnx2_enable_nvram_write(bp); + + /* Loop to write back the buffer data from page_start to + * data_start */ + i = 0; + if (bp->flash_info->buffered == 0) { + for (addr = page_start; addr < data_start; + addr += 4, i += 4) { + + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Loop to write the new data from data_start to data_end */ + for (addr = data_start; addr < data_end; addr += 4, i++) { + if ((addr == page_end - 4) || + ((bp->flash_info->buffered) && + (addr == data_end - 4))) { + + cmd_flags |= BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, buf, + cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + buf += 4; + } + + /* Loop to write back the buffer data from data_end + * to page_end */ + if (bp->flash_info->buffered == 0) { + for (addr = data_end; addr < page_end; + addr += 4, i += 4) { + + if (addr == page_end-4) { + cmd_flags = BNX2_NVM_COMMAND_LAST; + } + rc = bnx2_nvram_write_dword(bp, addr, + &flash_buffer[i], cmd_flags); + + if (rc != 0) + goto nvram_write_end; + + cmd_flags = 0; + } + } + + /* Disable writes to flash interface (lock write-protect) */ + bnx2_disable_nvram_write(bp); + + /* Disable access to flash interface */ + bnx2_disable_nvram_access(bp); + bnx2_release_nvram_lock(bp); + + /* Increment written */ + written += data_end - data_start; + } + +nvram_write_end: + if (align_start || align_end) + kfree(buf); + return rc; +} + +static int +bnx2_reset_chip(struct bnx2 *bp, u32 reset_code) +{ + u32 val; + int i, rc = 0; + + /* Wait for the current PCI transaction to complete before + * issuing a reset. */ + REG_WR(bp, BNX2_MISC_ENABLE_CLR_BITS, + BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE | + BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE); + val = REG_RD(bp, BNX2_MISC_ENABLE_CLR_BITS); + udelay(5); + + /* Deposit a driver reset signature so the firmware knows that + * this is a soft reset. */ + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_RESET_SIGNATURE, + BNX2_DRV_RESET_SIGNATURE_MAGIC); + + bp->fw_timed_out = 0; + + /* Wait for the firmware to tell us it is ok to issue a reset. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT0 | reset_code); + + /* Do a dummy read to force the chip to complete all current transaction + * before we issue a reset. */ + val = REG_RD(bp, BNX2_MISC_ID); + + val = BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP; + + /* Chip reset. */ + REG_WR(bp, BNX2_PCICFG_MISC_CONFIG, val); + + if ((CHIP_ID(bp) == CHIP_ID_5706_A0) || + (CHIP_ID(bp) == CHIP_ID_5706_A1)) + msleep(15); + + /* Reset takes approximate 30 usec */ + for (i = 0; i < 10; i++) { + val = REG_RD(bp, BNX2_PCICFG_MISC_CONFIG); + if ((val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) == 0) { + break; + } + udelay(10); + } + + if (val & (BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ | + BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY)) { + printk(KERN_ERR PFX "Chip reset did not complete\n"); + return -EBUSY; + } + + /* Make sure byte swapping is properly configured. */ + val = REG_RD(bp, BNX2_PCI_SWAP_DIAG0); + if (val != 0x01020304) { + printk(KERN_ERR PFX "Chip not in correct endian mode\n"); + return -ENODEV; + } + + bp->fw_timed_out = 0; + + /* Wait for the firmware to finish its initialization. */ + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT1 | reset_code); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + /* Adjust the voltage regular to two steps lower. The default + * of this register is 0x0000000e. */ + REG_WR(bp, BNX2_MISC_VREG_CONTROL, 0x000000fa); + + /* Remove bad rbuf memory from the free pool. */ + rc = bnx2_alloc_bad_rbuf(bp); + } + + return rc; +} + +static int +bnx2_init_chip(struct bnx2 *bp) +{ + u32 val; + + /* Make sure the interrupt is not active. */ + REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD, BNX2_PCICFG_INT_ACK_CMD_MASK_INT); + + val = BNX2_DMA_CONFIG_DATA_BYTE_SWAP | + BNX2_DMA_CONFIG_DATA_WORD_SWAP | +#ifdef __BIG_ENDIAN + BNX2_DMA_CONFIG_CNTL_BYTE_SWAP | +#endif + BNX2_DMA_CONFIG_CNTL_WORD_SWAP | + DMA_READ_CHANS << 12 | + DMA_WRITE_CHANS << 16; + + val |= (0x2 << 20) | (1 << 11); + + if ((bp->flags & PCIX_FLAG) && (bp->bus_speed_mhz = 133)) + val |= (1 << 23); + + if ((CHIP_NUM(bp) == CHIP_NUM_5706) && + (CHIP_ID(bp) != CHIP_ID_5706_A0) && !(bp->flags & PCIX_FLAG)) + val |= BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA; + + REG_WR(bp, BNX2_DMA_CONFIG, val); + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + val = REG_RD(bp, BNX2_TDMA_CONFIG); + val |= BNX2_TDMA_CONFIG_ONE_DMA; + REG_WR(bp, BNX2_TDMA_CONFIG, val); + } + + if (bp->flags & PCIX_FLAG) { + u16 val16; + + pci_read_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + &val16); + pci_write_config_word(bp->pdev, bp->pcix_cap + PCI_X_CMD, + val16 & ~PCI_X_CMD_ERO); + } + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, + BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE | + BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE); + + /* Initialize context mapping and zero out the quick contexts. The + * context block must have already been enabled. */ + bnx2_init_context(bp); + + bnx2_init_cpus(bp); + bnx2_init_nvram(bp); + + bnx2_set_mac_addr(bp); + + val = REG_RD(bp, BNX2_MQ_CONFIG); + val &= ~BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE; + val |= BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256; + REG_WR(bp, BNX2_MQ_CONFIG, val); + + val = 0x10000 + (MAX_CID_CNT * MB_KERNEL_CTX_SIZE); + REG_WR(bp, BNX2_MQ_KNL_BYP_WIND_START, val); + REG_WR(bp, BNX2_MQ_KNL_WIND_END, val); + + val = (BCM_PAGE_BITS - 8) << 24; + REG_WR(bp, BNX2_RV2P_CONFIG, val); + + /* Configure page size. */ + val = REG_RD(bp, BNX2_TBDR_CONFIG); + val &= ~BNX2_TBDR_CONFIG_PAGE_SIZE; + val |= (BCM_PAGE_BITS - 8) << 24 | 0x40; + REG_WR(bp, BNX2_TBDR_CONFIG, val); + + val = bp->mac_addr[0] + + (bp->mac_addr[1] << 8) + + (bp->mac_addr[2] << 16) + + bp->mac_addr[3] + + (bp->mac_addr[4] << 8) + + (bp->mac_addr[5] << 16); + REG_WR(bp, BNX2_EMAC_BACKOFF_SEED, val); + + /* Program the MTU. Also include 4 bytes for CRC32. */ + val = bp->dev->mtu + ETH_HLEN + 4; + if (val > (MAX_ETHERNET_PACKET_SIZE + 4)) + val |= BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA; + REG_WR(bp, BNX2_EMAC_RX_MTU_SIZE, val); + + bp->last_status_idx = 0; + bp->rx_mode = BNX2_EMAC_RX_MODE_SORT_MODE; + + /* Set up how to generate a link change interrupt. */ + REG_WR(bp, BNX2_EMAC_ATTENTION_ENA, BNX2_EMAC_ATTENTION_ENA_LINK); + + REG_WR(bp, BNX2_HC_STATUS_ADDR_L, + (u64) bp->status_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATUS_ADDR_H, (u64) bp->status_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_L, + (u64) bp->stats_blk_mapping & 0xffffffff); + REG_WR(bp, BNX2_HC_STATISTICS_ADDR_H, + (u64) bp->stats_blk_mapping >> 32); + + REG_WR(bp, BNX2_HC_TX_QUICK_CONS_TRIP, + (bp->tx_quick_cons_trip_int << 16) | bp->tx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_RX_QUICK_CONS_TRIP, + (bp->rx_quick_cons_trip_int << 16) | bp->rx_quick_cons_trip); + + REG_WR(bp, BNX2_HC_COMP_PROD_TRIP, + (bp->comp_prod_trip_int << 16) | bp->comp_prod_trip); + + REG_WR(bp, BNX2_HC_TX_TICKS, (bp->tx_ticks_int << 16) | bp->tx_ticks); + + REG_WR(bp, BNX2_HC_RX_TICKS, (bp->rx_ticks_int << 16) | bp->rx_ticks); + + REG_WR(bp, BNX2_HC_COM_TICKS, + (bp->com_ticks_int << 16) | bp->com_ticks); + + REG_WR(bp, BNX2_HC_CMD_TICKS, + (bp->cmd_ticks_int << 16) | bp->cmd_ticks); + + REG_WR(bp, BNX2_HC_STATS_TICKS, bp->stats_ticks & 0xffff00); + REG_WR(bp, BNX2_HC_STAT_COLLECT_TICKS, 0xbb8); /* 3ms */ + + if (CHIP_ID(bp) == CHIP_ID_5706_A1) + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_COLLECT_STATS); + else { + REG_WR(bp, BNX2_HC_CONFIG, BNX2_HC_CONFIG_RX_TMR_MODE | + BNX2_HC_CONFIG_TX_TMR_MODE | + BNX2_HC_CONFIG_COLLECT_STATS); + } + + /* Clear internal stats counters. */ + REG_WR(bp, BNX2_HC_COMMAND, BNX2_HC_COMMAND_CLR_STAT_NOW); + + REG_WR(bp, BNX2_HC_ATTN_BITS_ENABLE, STATUS_ATTN_BITS_LINK_STATE); + + /* Initialize the receive filter. */ + bnx2_set_rx_mode(bp->dev); + + bnx2_fw_sync(bp, BNX2_DRV_MSG_DATA_WAIT2 | BNX2_DRV_MSG_CODE_RESET); + + REG_WR(bp, BNX2_MISC_ENABLE_SET_BITS, 0x5ffffff); + REG_RD(bp, BNX2_MISC_ENABLE_SET_BITS); + + udelay(20); + + return 0; +} + + +static void +bnx2_init_tx_ring(struct bnx2 *bp) +{ + struct tx_bd *txbd; + u32 val; + + txbd = &bp->tx_desc_ring[MAX_TX_DESC_CNT]; + + txbd->tx_bd_haddr_hi = (u64) bp->tx_desc_mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) bp->tx_desc_mapping & 0xffffffff; + + bp->tx_prod = 0; + bp->tx_cons = 0; + bp->tx_prod_bseq = 0; + atomic_set(&bp->tx_avail_bd, bp->tx_ring_size); + + val = BNX2_L2CTX_TYPE_TYPE_L2; + val |= BNX2_L2CTX_TYPE_SIZE_L2; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TYPE, val); + + val = BNX2_L2CTX_CMD_TYPE_TYPE_L2; + val |= 8 << 16; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_CMD_TYPE, val); + + val = (u64) bp->tx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_HI, val); + + val = (u64) bp->tx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(TX_CID), BNX2_L2CTX_TBDR_BHADDR_LO, val); +} + +static void +bnx2_init_rx_ring(struct bnx2 *bp) +{ + struct rx_bd *rxbd; + int i; + u16 prod, ring_prod; + u32 val; + + /* 8 for CRC and VLAN */ + bp->rx_buf_use_size = bp->dev->mtu + ETH_HLEN + bp->rx_offset + 8; + /* 8 for alignment */ + bp->rx_buf_size = bp->rx_buf_use_size + 8; + + ring_prod = prod = bp->rx_prod = 0; + bp->rx_cons = 0; + bp->rx_prod_bseq = 0; + + rxbd = &bp->rx_desc_ring[0]; + for (i = 0; i < MAX_RX_DESC_CNT; i++, rxbd++) { + rxbd->rx_bd_len = bp->rx_buf_use_size; + rxbd->rx_bd_flags = RX_BD_FLAGS_START | RX_BD_FLAGS_END; + } + + rxbd->rx_bd_haddr_hi = (u64) bp->rx_desc_mapping >> 32; + rxbd->rx_bd_haddr_lo = (u64) bp->rx_desc_mapping & 0xffffffff; + + val = BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE; + val |= BNX2_L2CTX_CTX_TYPE_SIZE_L2; + val |= 0x02 << 8; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_CTX_TYPE, val); + + val = (u64) bp->rx_desc_mapping >> 32; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_HI, val); + + val = (u64) bp->rx_desc_mapping & 0xffffffff; + CTX_WR(bp, GET_CID_ADDR(RX_CID), BNX2_L2CTX_NX_BDHADDR_LO, val); + + for ( ;ring_prod < bp->rx_ring_size; ) { + if (bnx2_alloc_rx_skb(bp, ring_prod) < 0) { + break; + } + prod = NEXT_RX_BD(prod); + ring_prod = RX_RING_IDX(prod); + } + bp->rx_prod = prod; + + REG_WR16(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BDIDX, prod); + + REG_WR(bp, MB_RX_CID_ADDR + BNX2_L2CTX_HOST_BSEQ, bp->rx_prod_bseq); +} + +static void +bnx2_free_tx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->tx_buf_ring == NULL) + return; + + for (i = 0; i < TX_DESC_CNT; ) { + struct sw_bd *tx_buf = &bp->tx_buf_ring[i]; + struct sk_buff *skb = tx_buf->skb; + int j, last; + + if (skb == NULL) { + i++; + continue; + } + + pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping), + skb_headlen(skb), PCI_DMA_TODEVICE); + + tx_buf->skb = NULL; + + last = skb_shinfo(skb)->nr_frags; + for (j = 0; j < last; j++) { + tx_buf = &bp->tx_buf_ring[i + j + 1]; + pci_unmap_page(bp->pdev, + pci_unmap_addr(tx_buf, mapping), + skb_shinfo(skb)->frags[j].size, + PCI_DMA_TODEVICE); + } + dev_kfree_skb_any(skb); + i += j + 1; + } + +} + +static void +bnx2_free_rx_skbs(struct bnx2 *bp) +{ + int i; + + if (bp->rx_buf_ring == NULL) + return; + + for (i = 0; i < RX_DESC_CNT; i++) { + struct sw_bd *rx_buf = &bp->rx_buf_ring[i]; + struct sk_buff *skb = rx_buf->skb; + + if (skb == 0) + continue; + + pci_unmap_single(bp->pdev, pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_use_size, PCI_DMA_FROMDEVICE); + + rx_buf->skb = NULL; + + dev_kfree_skb_any(skb); + } +} + +static void +bnx2_free_skbs(struct bnx2 *bp) +{ + bnx2_free_tx_skbs(bp); + bnx2_free_rx_skbs(bp); +} + +static int +bnx2_reset_nic(struct bnx2 *bp, u32 reset_code) +{ + int rc; + + rc = bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + if (rc) + return rc; + + bnx2_init_chip(bp); + bnx2_init_tx_ring(bp); + bnx2_init_rx_ring(bp); + return 0; +} + +static int +bnx2_init_nic(struct bnx2 *bp) +{ + int rc; + + if ((rc = bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_RESET)) != 0) + return rc; + + bnx2_init_phy(bp); + bnx2_set_link(bp); + return 0; +} + +static int +bnx2_test_registers(struct bnx2 *bp) +{ + int ret; + int i; + static struct { + u16 offset; + u16 flags; + u32 rw_mask; + u32 ro_mask; + } reg_tbl[] = { + { 0x006c, 0, 0x00000000, 0x0000003f }, + { 0x0090, 0, 0xffffffff, 0x00000000 }, + { 0x0094, 0, 0x00000000, 0x00000000 }, + + { 0x0404, 0, 0x00003f00, 0x00000000 }, + { 0x0418, 0, 0x00000000, 0xffffffff }, + { 0x041c, 0, 0x00000000, 0xffffffff }, + { 0x0420, 0, 0x00000000, 0x80ffffff }, + { 0x0424, 0, 0x00000000, 0x00000000 }, + { 0x0428, 0, 0x00000000, 0x00000001 }, + { 0x0450, 0, 0x00000000, 0x0000ffff }, + { 0x0454, 0, 0x00000000, 0xffffffff }, + { 0x0458, 0, 0x00000000, 0xffffffff }, + + { 0x0808, 0, 0x00000000, 0xffffffff }, + { 0x0854, 0, 0x00000000, 0xffffffff }, + { 0x0868, 0, 0x00000000, 0x77777777 }, + { 0x086c, 0, 0x00000000, 0x77777777 }, + { 0x0870, 0, 0x00000000, 0x77777777 }, + { 0x0874, 0, 0x00000000, 0x77777777 }, + + { 0x0c00, 0, 0x00000000, 0x00000001 }, + { 0x0c04, 0, 0x00000000, 0x03ff0001 }, + { 0x0c08, 0, 0x0f0ff073, 0x00000000 }, + { 0x0c0c, 0, 0x00ffffff, 0x00000000 }, + { 0x0c30, 0, 0x00000000, 0xffffffff }, + { 0x0c34, 0, 0x00000000, 0xffffffff }, + { 0x0c38, 0, 0x00000000, 0xffffffff }, + { 0x0c3c, 0, 0x00000000, 0xffffffff }, + { 0x0c40, 0, 0x00000000, 0xffffffff }, + { 0x0c44, 0, 0x00000000, 0xffffffff }, + { 0x0c48, 0, 0x00000000, 0x0007ffff }, + { 0x0c4c, 0, 0x00000000, 0xffffffff }, + { 0x0c50, 0, 0x00000000, 0xffffffff }, + { 0x0c54, 0, 0x00000000, 0xffffffff }, + { 0x0c58, 0, 0x00000000, 0xffffffff }, + { 0x0c5c, 0, 0x00000000, 0xffffffff }, + { 0x0c60, 0, 0x00000000, 0xffffffff }, + { 0x0c64, 0, 0x00000000, 0xffffffff }, + { 0x0c68, 0, 0x00000000, 0xffffffff }, + { 0x0c6c, 0, 0x00000000, 0xffffffff }, + { 0x0c70, 0, 0x00000000, 0xffffffff }, + { 0x0c74, 0, 0x00000000, 0xffffffff }, + { 0x0c78, 0, 0x00000000, 0xffffffff }, + { 0x0c7c, 0, 0x00000000, 0xffffffff }, + { 0x0c80, 0, 0x00000000, 0xffffffff }, + { 0x0c84, 0, 0x00000000, 0xffffffff }, + { 0x0c88, 0, 0x00000000, 0xffffffff }, + { 0x0c8c, 0, 0x00000000, 0xffffffff }, + { 0x0c90, 0, 0x00000000, 0xffffffff }, + { 0x0c94, 0, 0x00000000, 0xffffffff }, + { 0x0c98, 0, 0x00000000, 0xffffffff }, + { 0x0c9c, 0, 0x00000000, 0xffffffff }, + { 0x0ca0, 0, 0x00000000, 0xffffffff }, + { 0x0ca4, 0, 0x00000000, 0xffffffff }, + { 0x0ca8, 0, 0x00000000, 0x0007ffff }, + { 0x0cac, 0, 0x00000000, 0xffffffff }, + { 0x0cb0, 0, 0x00000000, 0xffffffff }, + { 0x0cb4, 0, 0x00000000, 0xffffffff }, + { 0x0cb8, 0, 0x00000000, 0xffffffff }, + { 0x0cbc, 0, 0x00000000, 0xffffffff }, + { 0x0cc0, 0, 0x00000000, 0xffffffff }, + { 0x0cc4, 0, 0x00000000, 0xffffffff }, + { 0x0cc8, 0, 0x00000000, 0xffffffff }, + { 0x0ccc, 0, 0x00000000, 0xffffffff }, + { 0x0cd0, 0, 0x00000000, 0xffffffff }, + { 0x0cd4, 0, 0x00000000, 0xffffffff }, + { 0x0cd8, 0, 0x00000000, 0xffffffff }, + { 0x0cdc, 0, 0x00000000, 0xffffffff }, + { 0x0ce0, 0, 0x00000000, 0xffffffff }, + { 0x0ce4, 0, 0x00000000, 0xffffffff }, + { 0x0ce8, 0, 0x00000000, 0xffffffff }, + { 0x0cec, 0, 0x00000000, 0xffffffff }, + { 0x0cf0, 0, 0x00000000, 0xffffffff }, + { 0x0cf4, 0, 0x00000000, 0xffffffff }, + { 0x0cf8, 0, 0x00000000, 0xffffffff }, + { 0x0cfc, 0, 0x00000000, 0xffffffff }, + { 0x0d00, 0, 0x00000000, 0xffffffff }, + { 0x0d04, 0, 0x00000000, 0xffffffff }, + + { 0x1000, 0, 0x00000000, 0x00000001 }, + { 0x1004, 0, 0x00000000, 0x000f0001 }, + { 0x1044, 0, 0x00000000, 0xffc003ff }, + { 0x1080, 0, 0x00000000, 0x0001ffff }, + { 0x1084, 0, 0x00000000, 0xffffffff }, + { 0x1088, 0, 0x00000000, 0xffffffff }, + { 0x108c, 0, 0x00000000, 0xffffffff }, + { 0x1090, 0, 0x00000000, 0xffffffff }, + { 0x1094, 0, 0x00000000, 0xffffffff }, + { 0x1098, 0, 0x00000000, 0xffffffff }, + { 0x109c, 0, 0x00000000, 0xffffffff }, + { 0x10a0, 0, 0x00000000, 0xffffffff }, + + { 0x1408, 0, 0x01c00800, 0x00000000 }, + { 0x149c, 0, 0x8000ffff, 0x00000000 }, + { 0x14a8, 0, 0x00000000, 0x000001ff }, + { 0x14ac, 0, 0x4fffffff, 0x10000000 }, + { 0x14b0, 0, 0x00000002, 0x00000001 }, + { 0x14b8, 0, 0x00000000, 0x00000000 }, + { 0x14c0, 0, 0x00000000, 0x00000009 }, + { 0x14c4, 0, 0x00003fff, 0x00000000 }, + { 0x14cc, 0, 0x00000000, 0x00000001 }, + { 0x14d0, 0, 0xffffffff, 0x00000000 }, + { 0x1500, 0, 0x00000000, 0xffffffff }, + { 0x1504, 0, 0x00000000, 0xffffffff }, + { 0x1508, 0, 0x00000000, 0xffffffff }, + { 0x150c, 0, 0x00000000, 0xffffffff }, + { 0x1510, 0, 0x00000000, 0xffffffff }, + { 0x1514, 0, 0x00000000, 0xffffffff }, + { 0x1518, 0, 0x00000000, 0xffffffff }, + { 0x151c, 0, 0x00000000, 0xffffffff }, + { 0x1520, 0, 0x00000000, 0xffffffff }, + { 0x1524, 0, 0x00000000, 0xffffffff }, + { 0x1528, 0, 0x00000000, 0xffffffff }, + { 0x152c, 0, 0x00000000, 0xffffffff }, + { 0x1530, 0, 0x00000000, 0xffffffff }, + { 0x1534, 0, 0x00000000, 0xffffffff }, + { 0x1538, 0, 0x00000000, 0xffffffff }, + { 0x153c, 0, 0x00000000, 0xffffffff }, + { 0x1540, 0, 0x00000000, 0xffffffff }, + { 0x1544, 0, 0x00000000, 0xffffffff }, + { 0x1548, 0, 0x00000000, 0xffffffff }, + { 0x154c, 0, 0x00000000, 0xffffffff }, + { 0x1550, 0, 0x00000000, 0xffffffff }, + { 0x1554, 0, 0x00000000, 0xffffffff }, + { 0x1558, 0, 0x00000000, 0xffffffff }, + { 0x1600, 0, 0x00000000, 0xffffffff }, + { 0x1604, 0, 0x00000000, 0xffffffff }, + { 0x1608, 0, 0x00000000, 0xffffffff }, + { 0x160c, 0, 0x00000000, 0xffffffff }, + { 0x1610, 0, 0x00000000, 0xffffffff }, + { 0x1614, 0, 0x00000000, 0xffffffff }, + { 0x1618, 0, 0x00000000, 0xffffffff }, + { 0x161c, 0, 0x00000000, 0xffffffff }, + { 0x1620, 0, 0x00000000, 0xffffffff }, + { 0x1624, 0, 0x00000000, 0xffffffff }, + { 0x1628, 0, 0x00000000, 0xffffffff }, + { 0x162c, 0, 0x00000000, 0xffffffff }, + { 0x1630, 0, 0x00000000, 0xffffffff }, + { 0x1634, 0, 0x00000000, 0xffffffff }, + { 0x1638, 0, 0x00000000, 0xffffffff }, + { 0x163c, 0, 0x00000000, 0xffffffff }, + { 0x1640, 0, 0x00000000, 0xffffffff }, + { 0x1644, 0, 0x00000000, 0xffffffff }, + { 0x1648, 0, 0x00000000, 0xffffffff }, + { 0x164c, 0, 0x00000000, 0xffffffff }, + { 0x1650, 0, 0x00000000, 0xffffffff }, + { 0x1654, 0, 0x00000000, 0xffffffff }, + + { 0x1800, 0, 0x00000000, 0x00000001 }, + { 0x1804, 0, 0x00000000, 0x00000003 }, + { 0x1840, 0, 0x00000000, 0xffffffff }, + { 0x1844, 0, 0x00000000, 0xffffffff }, + { 0x1848, 0, 0x00000000, 0xffffffff }, + { 0x184c, 0, 0x00000000, 0xffffffff }, + { 0x1850, 0, 0x00000000, 0xffffffff }, + { 0x1900, 0, 0x7ffbffff, 0x00000000 }, + { 0x1904, 0, 0xffffffff, 0x00000000 }, + { 0x190c, 0, 0xffffffff, 0x00000000 }, + { 0x1914, 0, 0xffffffff, 0x00000000 }, + { 0x191c, 0, 0xffffffff, 0x00000000 }, + { 0x1924, 0, 0xffffffff, 0x00000000 }, + { 0x192c, 0, 0xffffffff, 0x00000000 }, + { 0x1934, 0, 0xffffffff, 0x00000000 }, + { 0x193c, 0, 0xffffffff, 0x00000000 }, + { 0x1944, 0, 0xffffffff, 0x00000000 }, + { 0x194c, 0, 0xffffffff, 0x00000000 }, + { 0x1954, 0, 0xffffffff, 0x00000000 }, + { 0x195c, 0, 0xffffffff, 0x00000000 }, + { 0x1964, 0, 0xffffffff, 0x00000000 }, + { 0x196c, 0, 0xffffffff, 0x00000000 }, + { 0x1974, 0, 0xffffffff, 0x00000000 }, + { 0x197c, 0, 0xffffffff, 0x00000000 }, + { 0x1980, 0, 0x0700ffff, 0x00000000 }, + + { 0x1c00, 0, 0x00000000, 0x00000001 }, + { 0x1c04, 0, 0x00000000, 0x00000003 }, + { 0x1c08, 0, 0x0000000f, 0x00000000 }, + { 0x1c40, 0, 0x00000000, 0xffffffff }, + { 0x1c44, 0, 0x00000000, 0xffffffff }, + { 0x1c48, 0, 0x00000000, 0xffffffff }, + { 0x1c4c, 0, 0x00000000, 0xffffffff }, + { 0x1c50, 0, 0x00000000, 0xffffffff }, + { 0x1d00, 0, 0x7ffbffff, 0x00000000 }, + { 0x1d04, 0, 0xffffffff, 0x00000000 }, + { 0x1d0c, 0, 0xffffffff, 0x00000000 }, + { 0x1d14, 0, 0xffffffff, 0x00000000 }, + { 0x1d1c, 0, 0xffffffff, 0x00000000 }, + { 0x1d24, 0, 0xffffffff, 0x00000000 }, + { 0x1d2c, 0, 0xffffffff, 0x00000000 }, + { 0x1d34, 0, 0xffffffff, 0x00000000 }, + { 0x1d3c, 0, 0xffffffff, 0x00000000 }, + { 0x1d44, 0, 0xffffffff, 0x00000000 }, + { 0x1d4c, 0, 0xffffffff, 0x00000000 }, + { 0x1d54, 0, 0xffffffff, 0x00000000 }, + { 0x1d5c, 0, 0xffffffff, 0x00000000 }, + { 0x1d64, 0, 0xffffffff, 0x00000000 }, + { 0x1d6c, 0, 0xffffffff, 0x00000000 }, + { 0x1d74, 0, 0xffffffff, 0x00000000 }, + { 0x1d7c, 0, 0xffffffff, 0x00000000 }, + { 0x1d80, 0, 0x0700ffff, 0x00000000 }, + + { 0x2004, 0, 0x00000000, 0x0337000f }, + { 0x2008, 0, 0xffffffff, 0x00000000 }, + { 0x200c, 0, 0xffffffff, 0x00000000 }, + { 0x2010, 0, 0xffffffff, 0x00000000 }, + { 0x2014, 0, 0x801fff80, 0x00000000 }, + { 0x2018, 0, 0x000003ff, 0x00000000 }, + + { 0x2800, 0, 0x00000000, 0x00000001 }, + { 0x2804, 0, 0x00000000, 0x00003f01 }, + { 0x2808, 0, 0x0f3f3f03, 0x00000000 }, + { 0x2810, 0, 0xffff0000, 0x00000000 }, + { 0x2814, 0, 0xffff0000, 0x00000000 }, + { 0x2818, 0, 0xffff0000, 0x00000000 }, + { 0x281c, 0, 0xffff0000, 0x00000000 }, + { 0x2834, 0, 0xffffffff, 0x00000000 }, + { 0x2840, 0, 0x00000000, 0xffffffff }, + { 0x2844, 0, 0x00000000, 0xffffffff }, + { 0x2848, 0, 0xffffffff, 0x00000000 }, + { 0x284c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x2c00, 0, 0x00000000, 0x00000011 }, + { 0x2c04, 0, 0x00000000, 0x00030007 }, + + { 0x3000, 0, 0x00000000, 0x00000001 }, + { 0x3004, 0, 0x00000000, 0x007007ff }, + { 0x3008, 0, 0x00000003, 0x00000000 }, + { 0x300c, 0, 0xffffffff, 0x00000000 }, + { 0x3010, 0, 0xffffffff, 0x00000000 }, + { 0x3014, 0, 0xffffffff, 0x00000000 }, + { 0x3034, 0, 0xffffffff, 0x00000000 }, + { 0x3038, 0, 0xffffffff, 0x00000000 }, + { 0x3050, 0, 0x00000001, 0x00000000 }, + + { 0x3c00, 0, 0x00000000, 0x00000001 }, + { 0x3c04, 0, 0x00000000, 0x00070000 }, + { 0x3c08, 0, 0x00007f71, 0x07f00000 }, + { 0x3c0c, 0, 0x1f3ffffc, 0x00000000 }, + { 0x3c10, 0, 0xffffffff, 0x00000000 }, + { 0x3c14, 0, 0x00000000, 0xffffffff }, + { 0x3c18, 0, 0x00000000, 0xffffffff }, + { 0x3c1c, 0, 0xfffff000, 0x00000000 }, + { 0x3c20, 0, 0xffffff00, 0x00000000 }, + { 0x3c24, 0, 0xffffffff, 0x00000000 }, + { 0x3c28, 0, 0xffffffff, 0x00000000 }, + { 0x3c2c, 0, 0xffffffff, 0x00000000 }, + { 0x3c30, 0, 0xffffffff, 0x00000000 }, + { 0x3c34, 0, 0xffffffff, 0x00000000 }, + { 0x3c38, 0, 0xffffffff, 0x00000000 }, + { 0x3c3c, 0, 0xffffffff, 0x00000000 }, + { 0x3c40, 0, 0xffffffff, 0x00000000 }, + { 0x3c44, 0, 0xffffffff, 0x00000000 }, + { 0x3c48, 0, 0xffffffff, 0x00000000 }, + { 0x3c4c, 0, 0xffffffff, 0x00000000 }, + { 0x3c50, 0, 0xffffffff, 0x00000000 }, + { 0x3c54, 0, 0xffffffff, 0x00000000 }, + { 0x3c58, 0, 0xffffffff, 0x00000000 }, + { 0x3c5c, 0, 0xffffffff, 0x00000000 }, + { 0x3c60, 0, 0xffffffff, 0x00000000 }, + { 0x3c64, 0, 0xffffffff, 0x00000000 }, + { 0x3c68, 0, 0xffffffff, 0x00000000 }, + { 0x3c6c, 0, 0xffffffff, 0x00000000 }, + { 0x3c70, 0, 0xffffffff, 0x00000000 }, + { 0x3c74, 0, 0x0000003f, 0x00000000 }, + { 0x3c78, 0, 0x00000000, 0x00000000 }, + { 0x3c7c, 0, 0x00000000, 0x00000000 }, + { 0x3c80, 0, 0x3fffffff, 0x00000000 }, + { 0x3c84, 0, 0x0000003f, 0x00000000 }, + { 0x3c88, 0, 0x00000000, 0xffffffff }, + { 0x3c8c, 0, 0x00000000, 0xffffffff }, + + { 0x4000, 0, 0x00000000, 0x00000001 }, + { 0x4004, 0, 0x00000000, 0x00030000 }, + { 0x4008, 0, 0x00000ff0, 0x00000000 }, + { 0x400c, 0, 0xffffffff, 0x00000000 }, + { 0x4088, 0, 0x00000000, 0x00070303 }, + + { 0x4400, 0, 0x00000000, 0x00000001 }, + { 0x4404, 0, 0x00000000, 0x00003f01 }, + { 0x4408, 0, 0x7fff00ff, 0x00000000 }, + { 0x440c, 0, 0xffffffff, 0x00000000 }, + { 0x4410, 0, 0xffff, 0x0000 }, + { 0x4414, 0, 0xffff, 0x0000 }, + { 0x4418, 0, 0xffff, 0x0000 }, + { 0x441c, 0, 0xffff, 0x0000 }, + { 0x4428, 0, 0xffffffff, 0x00000000 }, + { 0x442c, 0, 0xffffffff, 0x00000000 }, + { 0x4430, 0, 0xffffffff, 0x00000000 }, + { 0x4434, 0, 0xffffffff, 0x00000000 }, + { 0x4438, 0, 0xffffffff, 0x00000000 }, + { 0x443c, 0, 0xffffffff, 0x00000000 }, + { 0x4440, 0, 0xffffffff, 0x00000000 }, + { 0x4444, 0, 0xffffffff, 0x00000000 }, + + { 0x4c00, 0, 0x00000000, 0x00000001 }, + { 0x4c04, 0, 0x00000000, 0x0000003f }, + { 0x4c08, 0, 0xffffffff, 0x00000000 }, + { 0x4c0c, 0, 0x0007fc00, 0x00000000 }, + { 0x4c10, 0, 0x80003fe0, 0x00000000 }, + { 0x4c14, 0, 0xffffffff, 0x00000000 }, + { 0x4c44, 0, 0x00000000, 0x9fff9fff }, + { 0x4c48, 0, 0x00000000, 0xb3009fff }, + { 0x4c4c, 0, 0x00000000, 0x77f33b30 }, + { 0x4c50, 0, 0x00000000, 0xffffffff }, + + { 0x5004, 0, 0x00000000, 0x0000007f }, + { 0x5008, 0, 0x0f0007ff, 0x00000000 }, + { 0x500c, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5400, 0, 0x00000008, 0x00000001 }, + { 0x5404, 0, 0x00000000, 0x0000003f }, + { 0x5408, 0, 0x0000001f, 0x00000000 }, + { 0x540c, 0, 0xffffffff, 0x00000000 }, + { 0x5410, 0, 0xffffffff, 0x00000000 }, + { 0x5414, 0, 0x0000ffff, 0x00000000 }, + { 0x5418, 0, 0x0000ffff, 0x00000000 }, + { 0x541c, 0, 0x0000ffff, 0x00000000 }, + { 0x5420, 0, 0x0000ffff, 0x00000000 }, + { 0x5428, 0, 0x000000ff, 0x00000000 }, + { 0x542c, 0, 0xff00ffff, 0x00000000 }, + { 0x5430, 0, 0x001fff80, 0x00000000 }, + { 0x5438, 0, 0xffffffff, 0x00000000 }, + { 0x543c, 0, 0xffffffff, 0x00000000 }, + { 0x5440, 0, 0xf800f800, 0x07ff07ff }, + + { 0x5c00, 0, 0x00000000, 0x00000001 }, + { 0x5c04, 0, 0x00000000, 0x0003000f }, + { 0x5c08, 0, 0x00000003, 0x00000000 }, + { 0x5c0c, 0, 0x0000fff8, 0x00000000 }, + { 0x5c10, 0, 0x00000000, 0xffffffff }, + { 0x5c80, 0, 0x00000000, 0x0f7113f1 }, + { 0x5c84, 0, 0x00000000, 0x0000f333 }, + { 0x5c88, 0, 0x00000000, 0x00077373 }, + { 0x5c8c, 0, 0x00000000, 0x0007f737 }, + + { 0x6808, 0, 0x0000ff7f, 0x00000000 }, + { 0x680c, 0, 0xffffffff, 0x00000000 }, + { 0x6810, 0, 0xffffffff, 0x00000000 }, + { 0x6814, 0, 0xffffffff, 0x00000000 }, + { 0x6818, 0, 0xffffffff, 0x00000000 }, + { 0x681c, 0, 0xffffffff, 0x00000000 }, + { 0x6820, 0, 0x00ff00ff, 0x00000000 }, + { 0x6824, 0, 0x00ff00ff, 0x00000000 }, + { 0x6828, 0, 0x00ff00ff, 0x00000000 }, + { 0x682c, 0, 0x03ff03ff, 0x00000000 }, + { 0x6830, 0, 0x03ff03ff, 0x00000000 }, + { 0x6834, 0, 0x03ff03ff, 0x00000000 }, + { 0x6838, 0, 0x03ff03ff, 0x00000000 }, + { 0x683c, 0, 0x0000ffff, 0x00000000 }, + { 0x6840, 0, 0x00000ff0, 0x00000000 }, + { 0x6844, 0, 0x00ffff00, 0x00000000 }, + { 0x684c, 0, 0xffffffff, 0x00000000 }, + { 0x6850, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6854, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6858, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x685c, 0, 0x7f7f7f7f, 0x00000000 }, + { 0x6908, 0, 0x00000000, 0x0001ff0f }, + { 0x690c, 0, 0x00000000, 0x0ffe00f0 }, + + { 0xffff, 0, 0x00000000, 0x00000000 }, + }; + + ret = 0; + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + u32 offset, rw_mask, ro_mask, save_val, val; + + offset = (u32) reg_tbl[i].offset; + rw_mask = reg_tbl[i].rw_mask; + ro_mask = reg_tbl[i].ro_mask; + + save_val = readl((u8 *) bp->regview + offset); + + writel(0, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != 0) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(0xffffffff, (u8 *) bp->regview + offset); + + val = readl((u8 *) bp->regview + offset); + if ((val & rw_mask) != rw_mask) { + goto reg_test_err; + } + + if ((val & ro_mask) != (save_val & ro_mask)) { + goto reg_test_err; + } + + writel(save_val, (u8 *) bp->regview + offset); + continue; + +reg_test_err: + writel(save_val, (u8 *) bp->regview + offset); + ret = -ENODEV; + break; + } + return ret; +} + +static int +bnx2_do_mem_test(struct bnx2 *bp, u32 start, u32 size) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0x55555555, + 0xaaaaaaaa , 0xaa55aa55, 0x55aa55aa }; + int i; + + for (i = 0; i < sizeof(test_pattern) / 4; i++) { + u32 offset; + + for (offset = 0; offset < size; offset += 4) { + + REG_WR_IND(bp, start + offset, test_pattern[i]); + + if (REG_RD_IND(bp, start + offset) != + test_pattern[i]) { + return -ENODEV; + } + } + } + return 0; +} + +static int +bnx2_test_memory(struct bnx2 *bp) +{ + int ret = 0; + int i; + static struct { + u32 offset; + u32 len; + } mem_tbl[] = { + { 0x60000, 0x4000 }, + { 0xa0000, 0x4000 }, + { 0xe0000, 0x4000 }, + { 0x120000, 0x4000 }, + { 0x1a0000, 0x4000 }, + { 0x160000, 0x4000 }, + { 0xffffffff, 0 }, + }; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((ret = bnx2_do_mem_test(bp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) { + return ret; + } + } + + return ret; +} + +static int +bnx2_test_loopback(struct bnx2 *bp) +{ + unsigned int pkt_size, num_pkts, i; + struct sk_buff *skb, *rx_skb; + unsigned char *packet; + u16 rx_start_idx, rx_idx, send_idx; + u32 send_bseq, val; + dma_addr_t map; + struct tx_bd *txbd; + struct sw_bd *rx_buf; + struct l2_fhdr *rx_hdr; + int ret = -ENODEV; + + if (!netif_running(bp->dev)) + return -ENODEV; + + bp->loopback = MAC_LOOPBACK; + bnx2_reset_nic(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_set_mac_loopback(bp); + + pkt_size = 1514; + skb = dev_alloc_skb(pkt_size); + packet = skb_put(skb, pkt_size); + memcpy(packet, bp->mac_addr, 6); + memset(packet + 6, 0x0, 8); + for (i = 14; i < pkt_size; i++) + packet[i] = (unsigned char) (i & 0xff); + + map = pci_map_single(bp->pdev, skb->data, pkt_size, + PCI_DMA_TODEVICE); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + rx_start_idx = bp->status_blk->status_rx_quick_consumer_index0; + + send_idx = 0; + send_bseq = 0; + num_pkts = 0; + + txbd = &bp->tx_desc_ring[send_idx]; + + txbd->tx_bd_haddr_hi = (u64) map >> 32; + txbd->tx_bd_haddr_lo = (u64) map & 0xffffffff; + txbd->tx_bd_mss_nbytes = pkt_size; + txbd->tx_bd_vlan_tag_flags = TX_BD_FLAGS_START | TX_BD_FLAGS_END; + + num_pkts++; + send_idx = NEXT_TX_BD(send_idx); + + send_bseq += pkt_size; + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, send_idx); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, send_bseq); + + + udelay(100); + + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW_WO_INT); + REG_RD(bp, BNX2_HC_COMMAND); + + udelay(5); + + pci_unmap_single(bp->pdev, map, pkt_size, PCI_DMA_TODEVICE); + dev_kfree_skb_irq(skb); + + if (bp->status_blk->status_tx_quick_consumer_index0 != send_idx) { + goto loopback_test_done; + } + + rx_idx = bp->status_blk->status_rx_quick_consumer_index0; + if (rx_idx != rx_start_idx + num_pkts) { + goto loopback_test_done; + } + + rx_buf = &bp->rx_buf_ring[rx_start_idx]; + rx_skb = rx_buf->skb; + + rx_hdr = (struct l2_fhdr *) rx_skb->data; + skb_reserve(rx_skb, bp->rx_offset); + + pci_dma_sync_single_for_cpu(bp->pdev, + pci_unmap_addr(rx_buf, mapping), + bp->rx_buf_size, PCI_DMA_FROMDEVICE); + + if (rx_hdr->l2_fhdr_errors & + (L2_FHDR_ERRORS_BAD_CRC | + L2_FHDR_ERRORS_PHY_DECODE | + L2_FHDR_ERRORS_ALIGNMENT | + L2_FHDR_ERRORS_TOO_SHORT | + L2_FHDR_ERRORS_GIANT_FRAME)) { + + goto loopback_test_done; + } + + if ((rx_hdr->l2_fhdr_pkt_len - 4) != pkt_size) { + goto loopback_test_done; + } + + for (i = 14; i < pkt_size; i++) { + if (*(rx_skb->data + i) != (unsigned char) (i & 0xff)) { + goto loopback_test_done; + } + } + + ret = 0; + +loopback_test_done: + bp->loopback = 0; + return ret; +} + +#define NVRAM_SIZE 0x200 +#define CRC32_RESIDUAL 0xdebb20e3 + +static int +bnx2_test_nvram(struct bnx2 *bp) +{ + u32 buf[NVRAM_SIZE / 4]; + u8 *data = (u8 *) buf; + int rc = 0; + u32 magic, csum; + + if ((rc = bnx2_nvram_read(bp, 0, data, 4)) != 0) + goto test_nvram_done; + + magic = be32_to_cpu(buf[0]); + if (magic != 0x669955aa) { + rc = -ENODEV; + goto test_nvram_done; + } + + if ((rc = bnx2_nvram_read(bp, 0x100, data, NVRAM_SIZE)) != 0) + goto test_nvram_done; + + csum = ether_crc_le(0x100, data); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + goto test_nvram_done; + } + + csum = ether_crc_le(0x100, data + 0x100); + if (csum != CRC32_RESIDUAL) { + rc = -ENODEV; + } + +test_nvram_done: + return rc; +} + +static int +bnx2_test_link(struct bnx2 *bp) +{ + u32 bmsr; + + spin_lock_irq(&bp->phy_lock); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + bnx2_read_phy(bp, MII_BMSR, &bmsr); + spin_unlock_irq(&bp->phy_lock); + + if (bmsr & BMSR_LSTATUS) { + return 0; + } + return -ENODEV; +} + +static int +bnx2_test_intr(struct bnx2 *bp) +{ + int i; + u32 val; + u16 status_idx; + + if (!netif_running(bp->dev)) + return -ENODEV; + + status_idx = REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff; + + /* This register is not touched during run-time. */ + val = REG_RD(bp, BNX2_HC_COMMAND); + REG_WR(bp, BNX2_HC_COMMAND, val | BNX2_HC_COMMAND_COAL_NOW); + REG_RD(bp, BNX2_HC_COMMAND); + + for (i = 0; i < 10; i++) { + if ((REG_RD(bp, BNX2_PCICFG_INT_ACK_CMD) & 0xffff) != + status_idx) { + + break; + } + + msleep_interruptible(10); + } + if (i < 10) + return 0; + + return -ENODEV; +} + +static void +bnx2_timer(unsigned long data) +{ + struct bnx2 *bp = (struct bnx2 *) data; + u32 msg; + + if (atomic_read(&bp->intr_sem) != 0) + goto bnx2_restart_timer; + + msg = (u32) ++bp->fw_drv_pulse_wr_seq; + REG_WR_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DRV_PULSE_MB, msg); + + if ((bp->phy_flags & PHY_SERDES_FLAG) && + (CHIP_NUM(bp) == CHIP_NUM_5706)) { + unsigned long flags; + + spin_lock_irqsave(&bp->phy_lock, flags); + if (bp->serdes_an_pending) { + bp->serdes_an_pending--; + } + else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + + if (bmcr & BMCR_ANENABLE) { + u32 phy1, phy2; + + bnx2_write_phy(bp, 0x1c, 0x7c00); + bnx2_read_phy(bp, 0x1c, &phy1); + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + + if ((phy1 & 0x10) && /* SIGNAL DETECT */ + !(phy2 & 0x20)) { /* no CONFIG */ + + bmcr &= ~BMCR_ANENABLE; + bmcr |= BMCR_SPEED1000 | + BMCR_FULLDPLX; + bnx2_write_phy(bp, MII_BMCR, bmcr); + bp->phy_flags |= + PHY_PARALLEL_DETECT_FLAG; + } + } + } + else if ((bp->link_up) && (bp->autoneg & AUTONEG_SPEED) && + (bp->phy_flags & PHY_PARALLEL_DETECT_FLAG)) { + u32 phy2; + + bnx2_write_phy(bp, 0x17, 0x0f01); + bnx2_read_phy(bp, 0x15, &phy2); + if (phy2 & 0x20) { + u32 bmcr; + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr |= BMCR_ANENABLE; + bnx2_write_phy(bp, MII_BMCR, bmcr); + + bp->phy_flags &= ~PHY_PARALLEL_DETECT_FLAG; + + } + } + + spin_unlock_irqrestore(&bp->phy_lock, flags); + } + +bnx2_restart_timer: + bp->timer.expires = RUN_AT(bp->timer_interval); + + add_timer(&bp->timer); +} + +/* Called with rtnl_lock */ +static int +bnx2_open(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + int rc; + + bnx2_set_power_state(bp, 0); + bnx2_disable_int(bp); + + rc = bnx2_alloc_mem(bp); + if (rc) + return rc; + + if ((CHIP_ID(bp) != CHIP_ID_5706_A0) && + (CHIP_ID(bp) != CHIP_ID_5706_A1) && + !disable_msi) { + + if (pci_enable_msi(bp->pdev) == 0) { + bp->flags |= USING_MSI_FLAG; + rc = request_irq(bp->pdev->irq, bnx2_msi, 0, dev->name, + dev); + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + } + else { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, SA_SHIRQ, + dev->name, dev); + } + if (rc) { + bnx2_free_mem(bp); + return rc; + } + + rc = bnx2_init_nic(bp); + + if (rc) { + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + return rc; + } + + init_timer(&bp->timer); + + bp->timer.expires = RUN_AT(bp->timer_interval); + bp->timer.data = (unsigned long) bp; + bp->timer.function = bnx2_timer; + add_timer(&bp->timer); + + atomic_set(&bp->intr_sem, 0); + + bnx2_enable_int(bp); + + if (bp->flags & USING_MSI_FLAG) { + /* Test MSI to make sure it is working + * If MSI test fails, go back to INTx mode + */ + if (bnx2_test_intr(bp) != 0) { + printk(KERN_WARNING PFX "%s: No interrupt was generated" + " using MSI, switching to INTx mode. Please" + " report this failure to the PCI maintainer" + " and include system chipset information.\n", + bp->dev->name); + + bnx2_disable_int(bp); + free_irq(bp->pdev->irq, dev); + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + + rc = bnx2_init_nic(bp); + + if (!rc) { + rc = request_irq(bp->pdev->irq, bnx2_interrupt, + SA_SHIRQ, dev->name, dev); + } + if (rc) { + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + del_timer_sync(&bp->timer); + return rc; + } + bnx2_enable_int(bp); + } + } + if (bp->flags & USING_MSI_FLAG) { + printk(KERN_INFO PFX "%s: using MSI\n", dev->name); + } + + netif_start_queue(dev); + + return 0; +} + +static void +bnx2_reset_task(void *data) +{ + struct bnx2 *bp = data; + + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + atomic_set(&bp->intr_sem, 1); + bnx2_netif_start(bp); +} + +static void +bnx2_tx_timeout(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + /* This allows the netif to be shutdown gracefully before resetting */ + schedule_work(&bp->reset_task); +} + +#ifdef BCM_VLAN +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_register(struct net_device *dev, struct vlan_group *vlgrp) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + bp->vlgrp = vlgrp; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} + +/* Called with rtnl_lock */ +static void +bnx2_vlan_rx_kill_vid(struct net_device *dev, uint16_t vid) +{ + struct bnx2 *bp = dev->priv; + + bnx2_netif_stop(bp); + + if (bp->vlgrp) + bp->vlgrp->vlan_devices[vid] = NULL; + bnx2_set_rx_mode(dev); + + bnx2_netif_start(bp); +} +#endif + +/* Called with dev->xmit_lock. + * hard_start_xmit is pseudo-lockless - a lock is only required when + * the tx queue is full. This way, we get the benefit of lockless + * operations most of the time without the complexities to handle + * netif_stop_queue/wake_queue race conditions. + */ +static int +bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + dma_addr_t mapping; + struct tx_bd *txbd; + struct sw_bd *tx_buf; + u32 len, vlan_tag_flags, last_frag, mss; + u16 prod, ring_prod; + int i; + + if (unlikely(atomic_read(&bp->tx_avail_bd) < + (skb_shinfo(skb)->nr_frags + 1))) { + + netif_stop_queue(dev); + printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n", + dev->name); + + return NETDEV_TX_BUSY; + } + len = skb_headlen(skb); + prod = bp->tx_prod; + ring_prod = TX_RING_IDX(prod); + + vlan_tag_flags = 0; + if (skb->ip_summed == CHECKSUM_HW) { + vlan_tag_flags |= TX_BD_FLAGS_TCP_UDP_CKSUM; + } + + if (bp->vlgrp != 0 && vlan_tx_tag_present(skb)) { + vlan_tag_flags |= + (TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16)); + } +#ifdef BCM_TSO + if ((mss = skb_shinfo(skb)->tso_size) && + (skb->len > (bp->dev->mtu + ETH_HLEN))) { + u32 tcp_opt_len, ip_tcp_len; + + if (skb_header_cloned(skb) && + pskb_expand_head(skb, 0, 0, GFP_ATOMIC)) { + dev_kfree_skb(skb); + return NETDEV_TX_OK; + } + + tcp_opt_len = ((skb->h.th->doff - 5) * 4); + vlan_tag_flags |= TX_BD_FLAGS_SW_LSO; + + tcp_opt_len = 0; + if (skb->h.th->doff > 5) { + tcp_opt_len = (skb->h.th->doff - 5) << 2; + } + ip_tcp_len = (skb->nh.iph->ihl << 2) + sizeof(struct tcphdr); + + skb->nh.iph->check = 0; + skb->nh.iph->tot_len = ntohs(mss + ip_tcp_len + tcp_opt_len); + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, IPPROTO_TCP, 0); + + if (tcp_opt_len || (skb->nh.iph->ihl > 5)) { + vlan_tag_flags |= ((skb->nh.iph->ihl - 5) + + (tcp_opt_len >> 2)) << 8; + } + } + else +#endif + { + mss = 0; + } + + mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE); + + tx_buf = &bp->tx_buf_ring[ring_prod]; + tx_buf->skb = skb; + pci_unmap_addr_set(tx_buf, mapping, mapping); + + txbd = &bp->tx_desc_ring[ring_prod]; + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags | TX_BD_FLAGS_START; + + last_frag = skb_shinfo(skb)->nr_frags; + + for (i = 0; i < last_frag; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + prod = NEXT_TX_BD(prod); + ring_prod = TX_RING_IDX(prod); + txbd = &bp->tx_desc_ring[ring_prod]; + + len = frag->size; + mapping = pci_map_page(bp->pdev, frag->page, frag->page_offset, + len, PCI_DMA_TODEVICE); + pci_unmap_addr_set(&bp->tx_buf_ring[ring_prod], + mapping, mapping); + + txbd->tx_bd_haddr_hi = (u64) mapping >> 32; + txbd->tx_bd_haddr_lo = (u64) mapping & 0xffffffff; + txbd->tx_bd_mss_nbytes = len | (mss << 16); + txbd->tx_bd_vlan_tag_flags = vlan_tag_flags; + + } + txbd->tx_bd_vlan_tag_flags |= TX_BD_FLAGS_END; + + prod = NEXT_TX_BD(prod); + bp->tx_prod_bseq += skb->len; + + atomic_sub(last_frag + 1, &bp->tx_avail_bd); + + REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod); + REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq); + + mmiowb(); + + bp->tx_prod = prod; + dev->trans_start = jiffies; + + if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) { + unsigned long flags; + + spin_lock_irqsave(&bp->tx_lock, flags); + if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) { + netif_stop_queue(dev); + + if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS) + netif_wake_queue(dev); + } + spin_unlock_irqrestore(&bp->tx_lock, flags); + } + + return NETDEV_TX_OK; +} + +/* Called with rtnl_lock */ +static int +bnx2_close(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 reset_code; + + flush_scheduled_work(); + bnx2_netif_stop(bp); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + free_irq(bp->pdev->irq, dev); + if (bp->flags & USING_MSI_FLAG) { + pci_disable_msi(bp->pdev); + bp->flags &= ~USING_MSI_FLAG; + } + bnx2_free_skbs(bp); + bnx2_free_mem(bp); + bp->link_up = 0; + netif_carrier_off(bp->dev); + bnx2_set_power_state(bp, 3); + return 0; +} + +#define GET_NET_STATS64(ctr) \ + (unsigned long) ((unsigned long) (ctr##_hi) << 32) + \ + (unsigned long) (ctr##_lo) + +#define GET_NET_STATS32(ctr) \ + (ctr##_lo) + +#if (BITS_PER_LONG == 64) +#define GET_NET_STATS GET_NET_STATS64 +#else +#define GET_NET_STATS GET_NET_STATS32 +#endif + +static struct net_device_stats * +bnx2_get_stats(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + struct statistics_block *stats_blk = bp->stats_blk; + struct net_device_stats *net_stats = &bp->net_stats; + + if (bp->stats_blk == NULL) { + return net_stats; + } + net_stats->rx_packets = + GET_NET_STATS(stats_blk->stat_IfHCInUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCInBroadcastPkts); + + net_stats->tx_packets = + GET_NET_STATS(stats_blk->stat_IfHCOutUcastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts) + + GET_NET_STATS(stats_blk->stat_IfHCOutBroadcastPkts); + + net_stats->rx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCInOctets); + + net_stats->tx_bytes = + GET_NET_STATS(stats_blk->stat_IfHCOutOctets); + + net_stats->multicast = + GET_NET_STATS(stats_blk->stat_IfHCOutMulticastPkts); + + net_stats->collisions = + (unsigned long) stats_blk->stat_EtherStatsCollisions; + + net_stats->rx_length_errors = + (unsigned long) (stats_blk->stat_EtherStatsUndersizePkts + + stats_blk->stat_EtherStatsOverrsizePkts); + + net_stats->rx_over_errors = + (unsigned long) stats_blk->stat_IfInMBUFDiscards; + + net_stats->rx_frame_errors = + (unsigned long) stats_blk->stat_Dot3StatsAlignmentErrors; + + net_stats->rx_crc_errors = + (unsigned long) stats_blk->stat_Dot3StatsFCSErrors; + + net_stats->rx_errors = net_stats->rx_length_errors + + net_stats->rx_over_errors + net_stats->rx_frame_errors + + net_stats->rx_crc_errors; + + net_stats->tx_aborted_errors = + (unsigned long) (stats_blk->stat_Dot3StatsExcessiveCollisions + + stats_blk->stat_Dot3StatsLateCollisions); + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + net_stats->tx_carrier_errors = 0; + else { + net_stats->tx_carrier_errors = + (unsigned long) + stats_blk->stat_Dot3StatsCarrierSenseErrors; + } + + net_stats->tx_errors = + (unsigned long) + stats_blk->stat_emac_tx_stat_dot3statsinternalmactransmiterrors + + + net_stats->tx_aborted_errors + + net_stats->tx_carrier_errors; + + return net_stats; +} + +/* All ethtool functions called with rtnl_lock */ + +static int +bnx2_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + + cmd->supported = SUPPORTED_Autoneg; + if (bp->phy_flags & PHY_SERDES_FLAG) { + cmd->supported |= SUPPORTED_1000baseT_Full | + SUPPORTED_FIBRE; + + cmd->port = PORT_FIBRE; + } + else { + cmd->supported |= SUPPORTED_10baseT_Half | + SUPPORTED_10baseT_Full | + SUPPORTED_100baseT_Half | + SUPPORTED_100baseT_Full | + SUPPORTED_1000baseT_Full | + SUPPORTED_TP; + + cmd->port = PORT_TP; + } + + cmd->advertising = bp->advertising; + + if (bp->autoneg & AUTONEG_SPEED) { + cmd->autoneg = AUTONEG_ENABLE; + } + else { + cmd->autoneg = AUTONEG_DISABLE; + } + + if (netif_carrier_ok(dev)) { + cmd->speed = bp->line_speed; + cmd->duplex = bp->duplex; + } + else { + cmd->speed = -1; + cmd->duplex = -1; + } + + cmd->transceiver = XCVR_INTERNAL; + cmd->phy_address = bp->phy_addr; + + return 0; +} + +static int +bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct bnx2 *bp = dev->priv; + u8 autoneg = bp->autoneg; + u8 req_duplex = bp->req_duplex; + u16 req_line_speed = bp->req_line_speed; + u32 advertising = bp->advertising; + + if (cmd->autoneg == AUTONEG_ENABLE) { + autoneg |= AUTONEG_SPEED; + + cmd->advertising &= ETHTOOL_ALL_COPPER_SPEED; + + /* allow advertising 1 speed */ + if ((cmd->advertising == ADVERTISED_10baseT_Half) || + (cmd->advertising == ADVERTISED_10baseT_Full) || + (cmd->advertising == ADVERTISED_100baseT_Half) || + (cmd->advertising == ADVERTISED_100baseT_Full)) { + + if (bp->phy_flags & PHY_SERDES_FLAG) + return -EINVAL; + + advertising = cmd->advertising; + + } + else if (cmd->advertising == ADVERTISED_1000baseT_Full) { + advertising = cmd->advertising; + } + else if (cmd->advertising == ADVERTISED_1000baseT_Half) { + return -EINVAL; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + advertising = ETHTOOL_ALL_FIBRE_SPEED; + } + else { + advertising = ETHTOOL_ALL_COPPER_SPEED; + } + } + advertising |= ADVERTISED_Autoneg; + } + else { + if (bp->phy_flags & PHY_SERDES_FLAG) { + if ((cmd->speed != SPEED_1000) || + (cmd->duplex != DUPLEX_FULL)) { + return -EINVAL; + } + } + else if (cmd->speed == SPEED_1000) { + return -EINVAL; + } + autoneg &= ~AUTONEG_SPEED; + req_line_speed = cmd->speed; + req_duplex = cmd->duplex; + advertising = 0; + } + + bp->autoneg = autoneg; + bp->advertising = advertising; + bp->req_line_speed = req_line_speed; + bp->req_duplex = req_duplex; + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static void +bnx2_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) +{ + struct bnx2 *bp = dev->priv; + + strcpy(info->driver, DRV_MODULE_NAME); + strcpy(info->version, DRV_MODULE_VERSION); + strcpy(info->bus_info, pci_name(bp->pdev)); + info->fw_version[0] = ((bp->fw_ver & 0xff000000) >> 24) + '0'; + info->fw_version[2] = ((bp->fw_ver & 0xff0000) >> 16) + '0'; + info->fw_version[4] = ((bp->fw_ver & 0xff00) >> 8) + '0'; + info->fw_version[6] = (bp->fw_ver & 0xff) + '0'; + info->fw_version[1] = info->fw_version[3] = info->fw_version[5] = '.'; + info->fw_version[7] = 0; +} + +static void +bnx2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flags & NO_WOL_FLAG) { + wol->supported = 0; + wol->wolopts = 0; + } + else { + wol->supported = WAKE_MAGIC; + if (bp->wol) + wol->wolopts = WAKE_MAGIC; + else + wol->wolopts = 0; + } + memset(&wol->sopass, 0, sizeof(wol->sopass)); +} + +static int +bnx2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct bnx2 *bp = dev->priv; + + if (wol->wolopts & ~WAKE_MAGIC) + return -EINVAL; + + if (wol->wolopts & WAKE_MAGIC) { + if (bp->flags & NO_WOL_FLAG) + return -EINVAL; + + bp->wol = 1; + } + else { + bp->wol = 0; + } + return 0; +} + +static int +bnx2_nway_reset(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + u32 bmcr; + + if (!(bp->autoneg & AUTONEG_SPEED)) { + return -EINVAL; + } + + spin_lock_irq(&bp->phy_lock); + + /* Force a link down visible on the other side */ + if (bp->phy_flags & PHY_SERDES_FLAG) { + bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK); + spin_unlock_irq(&bp->phy_lock); + + msleep(20); + + spin_lock_irq(&bp->phy_lock); + if (CHIP_NUM(bp) == CHIP_NUM_5706) { + bp->serdes_an_pending = SERDES_AN_TIMEOUT / + bp->timer_interval; + } + } + + bnx2_read_phy(bp, MII_BMCR, &bmcr); + bmcr &= ~BMCR_LOOPBACK; + bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static int +bnx2_get_eeprom_len(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + if (bp->flash_info == 0) + return 0; + + return (int) bp->flash_info->total_size; +} + +static int +bnx2_get_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_read(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom, + u8 *eebuf) +{ + struct bnx2 *bp = dev->priv; + int rc; + + if (eeprom->offset > bp->flash_info->total_size) + return -EINVAL; + + if ((eeprom->offset + eeprom->len) > bp->flash_info->total_size) + eeprom->len = bp->flash_info->total_size - eeprom->offset; + + rc = bnx2_nvram_write(bp, eeprom->offset, eebuf, eeprom->len); + + return rc; +} + +static int +bnx2_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + memset(coal, 0, sizeof(struct ethtool_coalesce)); + + coal->rx_coalesce_usecs = bp->rx_ticks; + coal->rx_max_coalesced_frames = bp->rx_quick_cons_trip; + coal->rx_coalesce_usecs_irq = bp->rx_ticks_int; + coal->rx_max_coalesced_frames_irq = bp->rx_quick_cons_trip_int; + + coal->tx_coalesce_usecs = bp->tx_ticks; + coal->tx_max_coalesced_frames = bp->tx_quick_cons_trip; + coal->tx_coalesce_usecs_irq = bp->tx_ticks_int; + coal->tx_max_coalesced_frames_irq = bp->tx_quick_cons_trip_int; + + coal->stats_block_coalesce_usecs = bp->stats_ticks; + + return 0; +} + +static int +bnx2_set_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_ticks = (u16) coal->rx_coalesce_usecs; + if (bp->rx_ticks > 0x3ff) bp->rx_ticks = 0x3ff; + + bp->rx_quick_cons_trip = (u16) coal->rx_max_coalesced_frames; + if (bp->rx_quick_cons_trip > 0xff) bp->rx_quick_cons_trip = 0xff; + + bp->rx_ticks_int = (u16) coal->rx_coalesce_usecs_irq; + if (bp->rx_ticks_int > 0x3ff) bp->rx_ticks_int = 0x3ff; + + bp->rx_quick_cons_trip_int = (u16) coal->rx_max_coalesced_frames_irq; + if (bp->rx_quick_cons_trip_int > 0xff) + bp->rx_quick_cons_trip_int = 0xff; + + bp->tx_ticks = (u16) coal->tx_coalesce_usecs; + if (bp->tx_ticks > 0x3ff) bp->tx_ticks = 0x3ff; + + bp->tx_quick_cons_trip = (u16) coal->tx_max_coalesced_frames; + if (bp->tx_quick_cons_trip > 0xff) bp->tx_quick_cons_trip = 0xff; + + bp->tx_ticks_int = (u16) coal->tx_coalesce_usecs_irq; + if (bp->tx_ticks_int > 0x3ff) bp->tx_ticks_int = 0x3ff; + + bp->tx_quick_cons_trip_int = (u16) coal->tx_max_coalesced_frames_irq; + if (bp->tx_quick_cons_trip_int > 0xff) bp->tx_quick_cons_trip_int = + 0xff; + + bp->stats_ticks = coal->stats_block_coalesce_usecs; + if (bp->stats_ticks > 0xffff00) bp->stats_ticks = 0xffff00; + bp->stats_ticks &= 0xffff00; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + ering->rx_max_pending = MAX_RX_DESC_CNT; + ering->rx_mini_max_pending = 0; + ering->rx_jumbo_max_pending = 0; + + ering->rx_pending = bp->rx_ring_size; + ering->rx_mini_pending = 0; + ering->rx_jumbo_pending = 0; + + ering->tx_max_pending = MAX_TX_DESC_CNT; + ering->tx_pending = bp->tx_ring_size; +} + +static int +bnx2_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) +{ + struct bnx2 *bp = dev->priv; + + if ((ering->rx_pending > MAX_RX_DESC_CNT) || + (ering->tx_pending > MAX_TX_DESC_CNT) || + (ering->tx_pending <= MAX_SKB_FRAGS)) { + + return -EINVAL; + } + bp->rx_ring_size = ering->rx_pending; + bp->tx_ring_size = ering->tx_pending; + + if (netif_running(bp->dev)) { + bnx2_netif_stop(bp); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + return 0; +} + +static void +bnx2_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + epause->autoneg = ((bp->autoneg & AUTONEG_FLOW_CTRL) != 0); + epause->rx_pause = ((bp->flow_ctrl & FLOW_CTRL_RX) != 0); + epause->tx_pause = ((bp->flow_ctrl & FLOW_CTRL_TX) != 0); +} + +static int +bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) +{ + struct bnx2 *bp = dev->priv; + + bp->req_flow_ctrl = 0; + if (epause->rx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_RX; + if (epause->tx_pause) + bp->req_flow_ctrl |= FLOW_CTRL_TX; + + if (epause->autoneg) { + bp->autoneg |= AUTONEG_FLOW_CTRL; + } + else { + bp->autoneg &= ~AUTONEG_FLOW_CTRL; + } + + spin_lock_irq(&bp->phy_lock); + + bnx2_setup_phy(bp); + + spin_unlock_irq(&bp->phy_lock); + + return 0; +} + +static u32 +bnx2_get_rx_csum(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + return bp->rx_csum; +} + +static int +bnx2_set_rx_csum(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + + bp->rx_csum = data; + return 0; +} + +#define BNX2_NUM_STATS 45 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_stats_str_arr[BNX2_NUM_STATS] = { + { "rx_bytes" }, + { "rx_error_bytes" }, + { "tx_bytes" }, + { "tx_error_bytes" }, + { "rx_ucast_packets" }, + { "rx_mcast_packets" }, + { "rx_bcast_packets" }, + { "tx_ucast_packets" }, + { "tx_mcast_packets" }, + { "tx_bcast_packets" }, + { "tx_mac_errors" }, + { "tx_carrier_errors" }, + { "rx_crc_errors" }, + { "rx_align_errors" }, + { "tx_single_collisions" }, + { "tx_multi_collisions" }, + { "tx_deferred" }, + { "tx_excess_collisions" }, + { "tx_late_collisions" }, + { "tx_total_collisions" }, + { "rx_fragments" }, + { "rx_jabbers" }, + { "rx_undersize_packets" }, + { "rx_oversize_packets" }, + { "rx_64_byte_packets" }, + { "rx_65_to_127_byte_packets" }, + { "rx_128_to_255_byte_packets" }, + { "rx_256_to_511_byte_packets" }, + { "rx_512_to_1023_byte_packets" }, + { "rx_1024_to_1522_byte_packets" }, + { "rx_1523_to_9022_byte_packets" }, + { "tx_64_byte_packets" }, + { "tx_65_to_127_byte_packets" }, + { "tx_128_to_255_byte_packets" }, + { "tx_256_to_511_byte_packets" }, + { "tx_512_to_1023_byte_packets" }, + { "tx_1024_to_1522_byte_packets" }, + { "tx_1523_to_9022_byte_packets" }, + { "rx_xon_frames" }, + { "rx_xoff_frames" }, + { "tx_xon_frames" }, + { "tx_xoff_frames" }, + { "rx_mac_ctrl_frames" }, + { "rx_filtered_packets" }, + { "rx_discards" }, +}; + +#define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4) + +unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = { + STATS_OFFSET32(stat_IfHCInOctets_hi), + STATS_OFFSET32(stat_IfHCInBadOctets_hi), + STATS_OFFSET32(stat_IfHCOutOctets_hi), + STATS_OFFSET32(stat_IfHCOutBadOctets_hi), + STATS_OFFSET32(stat_IfHCInUcastPkts_hi), + STATS_OFFSET32(stat_IfHCInMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCInBroadcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutUcastPkts_hi), + STATS_OFFSET32(stat_IfHCOutMulticastPkts_hi), + STATS_OFFSET32(stat_IfHCOutBroadcastPkts_hi), + STATS_OFFSET32(stat_emac_tx_stat_dot3statsinternalmactransmiterrors), + STATS_OFFSET32(stat_Dot3StatsCarrierSenseErrors), + STATS_OFFSET32(stat_Dot3StatsFCSErrors), + STATS_OFFSET32(stat_Dot3StatsAlignmentErrors), + STATS_OFFSET32(stat_Dot3StatsSingleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsMultipleCollisionFrames), + STATS_OFFSET32(stat_Dot3StatsDeferredTransmissions), + STATS_OFFSET32(stat_Dot3StatsExcessiveCollisions), + STATS_OFFSET32(stat_Dot3StatsLateCollisions), + STATS_OFFSET32(stat_EtherStatsCollisions), + STATS_OFFSET32(stat_EtherStatsFragments), + STATS_OFFSET32(stat_EtherStatsJabbers), + STATS_OFFSET32(stat_EtherStatsUndersizePkts), + STATS_OFFSET32(stat_EtherStatsOverrsizePkts), + STATS_OFFSET32(stat_EtherStatsPktsRx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsRx1523Octetsto9022Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx64Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx65Octetsto127Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx128Octetsto255Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx256Octetsto511Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx512Octetsto1023Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1024Octetsto1522Octets), + STATS_OFFSET32(stat_EtherStatsPktsTx1523Octetsto9022Octets), + STATS_OFFSET32(stat_XonPauseFramesReceived), + STATS_OFFSET32(stat_XoffPauseFramesReceived), + STATS_OFFSET32(stat_OutXonSent), + STATS_OFFSET32(stat_OutXoffSent), + STATS_OFFSET32(stat_MacControlFramesReceived), + STATS_OFFSET32(stat_IfInFramesL2FilterDiscards), + STATS_OFFSET32(stat_IfInMBUFDiscards), +}; + +/* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are + * skipped because of errata. + */ +u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = { + 8,0,8,8,8,8,8,8,8,8, + 4,0,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4,4,4,4,4,4, + 4,4,4,4,4, +}; + +#define BNX2_NUM_TESTS 6 + +struct { + char string[ETH_GSTRING_LEN]; +} bnx2_tests_str_arr[BNX2_NUM_TESTS] = { + { "register_test (offline)" }, + { "memory_test (offline)" }, + { "loopback_test (offline)" }, + { "nvram_test (online)" }, + { "interrupt_test (online)" }, + { "link_test (online)" }, +}; + +static int +bnx2_self_test_count(struct net_device *dev) +{ + return BNX2_NUM_TESTS; +} + +static void +bnx2_self_test(struct net_device *dev, struct ethtool_test *etest, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + + memset(buf, 0, sizeof(u64) * BNX2_NUM_TESTS); + if (etest->flags & ETH_TEST_FL_OFFLINE) { + bnx2_netif_stop(bp); + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_DIAG); + bnx2_free_skbs(bp); + + if (bnx2_test_registers(bp) != 0) { + buf[0] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_memory(bp) != 0) { + buf[1] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_loopback(bp) != 0) { + buf[2] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (!netif_running(bp->dev)) { + bnx2_reset_chip(bp, BNX2_DRV_MSG_CODE_RESET); + } + else { + bnx2_init_nic(bp); + bnx2_netif_start(bp); + } + + /* wait for link up */ + msleep_interruptible(3000); + if ((!bp->link_up) && !(bp->phy_flags & PHY_SERDES_FLAG)) + msleep_interruptible(4000); + } + + if (bnx2_test_nvram(bp) != 0) { + buf[3] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + if (bnx2_test_intr(bp) != 0) { + buf[4] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + } + + if (bnx2_test_link(bp) != 0) { + buf[5] = 1; + etest->flags |= ETH_TEST_FL_FAILED; + + } +} + +static void +bnx2_get_strings(struct net_device *dev, u32 stringset, u8 *buf) +{ + switch (stringset) { + case ETH_SS_STATS: + memcpy(buf, bnx2_stats_str_arr, + sizeof(bnx2_stats_str_arr)); + break; + case ETH_SS_TEST: + memcpy(buf, bnx2_tests_str_arr, + sizeof(bnx2_tests_str_arr)); + break; + } +} + +static int +bnx2_get_stats_count(struct net_device *dev) +{ + return BNX2_NUM_STATS; +} + +static void +bnx2_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *buf) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 *hw_stats = (u32 *) bp->stats_blk; + u8 *stats_len_arr = 0; + + if (hw_stats == NULL) { + memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS); + return; + } + + if (CHIP_NUM(bp) == CHIP_NUM_5706) + stats_len_arr = bnx2_5706_stats_len_arr; + + for (i = 0; i < BNX2_NUM_STATS; i++) { + if (stats_len_arr[i] == 0) { + /* skip this counter */ + buf[i] = 0; + continue; + } + if (stats_len_arr[i] == 4) { + /* 4-byte counter */ + buf[i] = (u64) + *(hw_stats + bnx2_stats_offset_arr[i]); + continue; + } + /* 8-byte counter */ + buf[i] = (((u64) *(hw_stats + + bnx2_stats_offset_arr[i])) << 32) + + *(hw_stats + bnx2_stats_offset_arr[i] + 1); + } +} + +static int +bnx2_phys_id(struct net_device *dev, u32 data) +{ + struct bnx2 *bp = dev->priv; + int i; + u32 save; + + if (data == 0) + data = 2; + + save = REG_RD(bp, BNX2_MISC_CFG); + REG_WR(bp, BNX2_MISC_CFG, BNX2_MISC_CFG_LEDMODE_MAC); + + for (i = 0; i < (data * 2); i++) { + if ((i % 2) == 0) { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE); + } + else { + REG_WR(bp, BNX2_EMAC_LED, BNX2_EMAC_LED_OVERRIDE | + BNX2_EMAC_LED_1000MB_OVERRIDE | + BNX2_EMAC_LED_100MB_OVERRIDE | + BNX2_EMAC_LED_10MB_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC_OVERRIDE | + BNX2_EMAC_LED_TRAFFIC); + } + msleep_interruptible(500); + if (signal_pending(current)) + break; + } + REG_WR(bp, BNX2_EMAC_LED, 0); + REG_WR(bp, BNX2_MISC_CFG, save); + return 0; +} + +static struct ethtool_ops bnx2_ethtool_ops = { + .get_settings = bnx2_get_settings, + .set_settings = bnx2_set_settings, + .get_drvinfo = bnx2_get_drvinfo, + .get_wol = bnx2_get_wol, + .set_wol = bnx2_set_wol, + .nway_reset = bnx2_nway_reset, + .get_link = ethtool_op_get_link, + .get_eeprom_len = bnx2_get_eeprom_len, + .get_eeprom = bnx2_get_eeprom, + .set_eeprom = bnx2_set_eeprom, + .get_coalesce = bnx2_get_coalesce, + .set_coalesce = bnx2_set_coalesce, + .get_ringparam = bnx2_get_ringparam, + .set_ringparam = bnx2_set_ringparam, + .get_pauseparam = bnx2_get_pauseparam, + .set_pauseparam = bnx2_set_pauseparam, + .get_rx_csum = bnx2_get_rx_csum, + .set_rx_csum = bnx2_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_csum, + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, +#ifdef BCM_TSO + .get_tso = ethtool_op_get_tso, + .set_tso = ethtool_op_set_tso, +#endif + .self_test_count = bnx2_self_test_count, + .self_test = bnx2_self_test, + .get_strings = bnx2_get_strings, + .phys_id = bnx2_phys_id, + .get_stats_count = bnx2_get_stats_count, + .get_ethtool_stats = bnx2_get_ethtool_stats, +}; + +/* Called with rtnl_lock */ +static int +bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data; + struct bnx2 *bp = dev->priv; + int err; + + switch(cmd) { + case SIOCGMIIPHY: + data->phy_id = bp->phy_addr; + + /* fallthru */ + case SIOCGMIIREG: { + u32 mii_regval; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval); + spin_unlock_irq(&bp->phy_lock); + + data->val_out = mii_regval; + + return err; + } + + case SIOCSMIIREG: + if (!capable(CAP_NET_ADMIN)) + return -EPERM; + + spin_lock_irq(&bp->phy_lock); + err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in); + spin_unlock_irq(&bp->phy_lock); + + return err; + + default: + /* do nothing */ + break; + } + return -EOPNOTSUPP; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mac_addr(struct net_device *dev, void *p) +{ + struct sockaddr *addr = p; + struct bnx2 *bp = dev->priv; + + memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); + if (netif_running(dev)) + bnx2_set_mac_addr(bp); + + return 0; +} + +/* Called with rtnl_lock */ +static int +bnx2_change_mtu(struct net_device *dev, int new_mtu) +{ + struct bnx2 *bp = dev->priv; + + if (((new_mtu + ETH_HLEN) > MAX_ETHERNET_JUMBO_PACKET_SIZE) || + ((new_mtu + ETH_HLEN) < MIN_ETHERNET_PACKET_SIZE)) + return -EINVAL; + + dev->mtu = new_mtu; + if (netif_running(dev)) { + bnx2_netif_stop(bp); + + bnx2_init_nic(bp); + + bnx2_netif_start(bp); + } + return 0; +} + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) +static void +poll_bnx2(struct net_device *dev) +{ + struct bnx2 *bp = dev->priv; + + disable_irq(bp->pdev->irq); + bnx2_interrupt(bp->pdev->irq, dev, NULL); + enable_irq(bp->pdev->irq); +} +#endif + +static int __devinit +bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) +{ + struct bnx2 *bp; + unsigned long mem_len; + int rc; + u32 reg; + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &pdev->dev); + bp = dev->priv; + + bp->flags = 0; + bp->phy_flags = 0; + + /* enable device (incl. PCI PM wakeup), and bus-mastering */ + rc = pci_enable_device(pdev); + if (rc) { + printk(KERN_ERR PFX "Cannot enable PCI device, aborting."); + goto err_out; + } + + if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) { + printk(KERN_ERR PFX "Cannot find PCI device base address, " + "aborting.\n"); + rc = -ENODEV; + goto err_out_disable; + } + + rc = pci_request_regions(pdev, DRV_MODULE_NAME); + if (rc) { + printk(KERN_ERR PFX "Cannot obtain PCI resources, aborting.\n"); + goto err_out_disable; + } + + pci_set_master(pdev); + + bp->pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM); + if (bp->pm_cap == 0) { + printk(KERN_ERR PFX "Cannot find power management capability, " + "aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->pcix_cap = pci_find_capability(pdev, PCI_CAP_ID_PCIX); + if (bp->pcix_cap == 0) { + printk(KERN_ERR PFX "Cannot find PCIX capability, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + if (pci_set_dma_mask(pdev, DMA_64BIT_MASK) == 0) { + bp->flags |= USING_DAC_FLAG; + if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK) != 0) { + printk(KERN_ERR PFX "pci_set_consistent_dma_mask " + "failed, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + } + else if (pci_set_dma_mask(pdev, DMA_32BIT_MASK) != 0) { + printk(KERN_ERR PFX "System does not support DMA, aborting.\n"); + rc = -EIO; + goto err_out_release; + } + + bp->dev = dev; + bp->pdev = pdev; + + spin_lock_init(&bp->phy_lock); + spin_lock_init(&bp->tx_lock); + INIT_WORK(&bp->reset_task, bnx2_reset_task, bp); + + dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0); + mem_len = MB_GET_CID_ADDR(17); + dev->mem_end = dev->mem_start + mem_len; + dev->irq = pdev->irq; + + bp->regview = ioremap_nocache(dev->base_addr, mem_len); + + if (!bp->regview) { + printk(KERN_ERR PFX "Cannot map register space, aborting.\n"); + rc = -ENOMEM; + goto err_out_release; + } + + /* Configure byte swap and enable write to the reg_window registers. + * Rely on CPU to do target byte swapping on big endian systems + * The chip's target access swapping will not swap all accesses + */ + pci_write_config_dword(bp->pdev, BNX2_PCICFG_MISC_CONFIG, + BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA | + BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP); + + bnx2_set_power_state(bp, 0); + + bp->chip_id = REG_RD(bp, BNX2_MISC_ID); + + bp->phy_addr = 1; + + /* Get bus information. */ + reg = REG_RD(bp, BNX2_PCICFG_MISC_STATUS); + if (reg & BNX2_PCICFG_MISC_STATUS_PCIX_DET) { + u32 clkreg; + + bp->flags |= PCIX_FLAG; + + clkreg = REG_RD(bp, BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS); + + clkreg &= BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET; + switch (clkreg) { + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ: + bp->bus_speed_mhz = 133; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ: + bp->bus_speed_mhz = 100; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ: + bp->bus_speed_mhz = 66; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ: + bp->bus_speed_mhz = 50; + break; + + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ: + case BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ: + bp->bus_speed_mhz = 33; + break; + } + } + else { + if (reg & BNX2_PCICFG_MISC_STATUS_M66EN) + bp->bus_speed_mhz = 66; + else + bp->bus_speed_mhz = 33; + } + + if (reg & BNX2_PCICFG_MISC_STATUS_32BIT_DET) + bp->flags |= PCI_32BIT_FLAG; + + /* 5706A0 may falsely detect SERR and PERR. */ + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + reg = REG_RD(bp, PCI_COMMAND); + reg &= ~(PCI_COMMAND_SERR | PCI_COMMAND_PARITY); + REG_WR(bp, PCI_COMMAND, reg); + } + else if ((CHIP_ID(bp) == CHIP_ID_5706_A1) && + !(bp->flags & PCIX_FLAG)) { + + printk(KERN_ERR PFX "5706 A1 can only be used in a PCIX bus, " + "aborting.\n"); + goto err_out_unmap; + } + + bnx2_init_nvram(bp); + + /* Get the permanent MAC address. First we need to make sure the + * firmware is actually running. + */ + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_DEV_INFO_SIGNATURE); + + if ((reg & BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK) != + BNX2_DEV_INFO_SIGNATURE_MAGIC) { + printk(KERN_ERR PFX "Firmware not running, aborting.\n"); + rc = -ENODEV; + goto err_out_unmap; + } + + bp->fw_ver = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + + BNX2_DEV_INFO_BC_REV); + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_UPPER); + bp->mac_addr[0] = (u8) (reg >> 8); + bp->mac_addr[1] = (u8) reg; + + reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE + BNX2_PORT_HW_CFG_MAC_LOWER); + bp->mac_addr[2] = (u8) (reg >> 24); + bp->mac_addr[3] = (u8) (reg >> 16); + bp->mac_addr[4] = (u8) (reg >> 8); + bp->mac_addr[5] = (u8) reg; + + bp->tx_ring_size = MAX_TX_DESC_CNT; + bp->rx_ring_size = 100; + + bp->rx_csum = 1; + + bp->rx_offset = sizeof(struct l2_fhdr) + 2; + + bp->tx_quick_cons_trip_int = 20; + bp->tx_quick_cons_trip = 20; + bp->tx_ticks_int = 80; + bp->tx_ticks = 80; + + bp->rx_quick_cons_trip_int = 6; + bp->rx_quick_cons_trip = 6; + bp->rx_ticks_int = 18; + bp->rx_ticks = 18; + + bp->stats_ticks = 1000000 & 0xffff00; + + bp->timer_interval = HZ; + + /* Disable WOL support if we are running on a SERDES chip. */ + if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) { + bp->phy_flags |= PHY_SERDES_FLAG; + bp->flags |= NO_WOL_FLAG; + } + + if (CHIP_ID(bp) == CHIP_ID_5706_A0) { + bp->tx_quick_cons_trip_int = + bp->tx_quick_cons_trip; + bp->tx_ticks_int = bp->tx_ticks; + bp->rx_quick_cons_trip_int = + bp->rx_quick_cons_trip; + bp->rx_ticks_int = bp->rx_ticks; + bp->comp_prod_trip_int = bp->comp_prod_trip; + bp->com_ticks_int = bp->com_ticks; + bp->cmd_ticks_int = bp->cmd_ticks; + } + + bp->autoneg = AUTONEG_SPEED | AUTONEG_FLOW_CTRL; + bp->req_line_speed = 0; + if (bp->phy_flags & PHY_SERDES_FLAG) { + bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg; + } + else { + bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg; + } + + bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX; + + return 0; + +err_out_unmap: + if (bp->regview) { + iounmap(bp->regview); + } + +err_out_release: + pci_release_regions(pdev); + +err_out_disable: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + +err_out: + return rc; +} + +static int __devinit +bnx2_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int version_printed = 0; + struct net_device *dev = NULL; + struct bnx2 *bp; + int rc, i; + + if (version_printed++ == 0) + printk(KERN_INFO "%s", version); + + /* dev zeroed in init_etherdev */ + dev = alloc_etherdev(sizeof(*bp)); + + if (!dev) + return -ENOMEM; + + rc = bnx2_init_board(pdev, dev); + if (rc < 0) { + free_netdev(dev); + return rc; + } + + dev->open = bnx2_open; + dev->hard_start_xmit = bnx2_start_xmit; + dev->stop = bnx2_close; + dev->get_stats = bnx2_get_stats; + dev->set_multicast_list = bnx2_set_rx_mode; + dev->do_ioctl = bnx2_ioctl; + dev->set_mac_address = bnx2_change_mac_addr; + dev->change_mtu = bnx2_change_mtu; + dev->tx_timeout = bnx2_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; +#ifdef BCM_VLAN + dev->vlan_rx_register = bnx2_vlan_rx_register; + dev->vlan_rx_kill_vid = bnx2_vlan_rx_kill_vid; +#endif + dev->poll = bnx2_poll; + dev->ethtool_ops = &bnx2_ethtool_ops; + dev->weight = 64; + + bp = dev->priv; + +#if defined(HAVE_POLL_CONTROLLER) || defined(CONFIG_NET_POLL_CONTROLLER) + dev->poll_controller = poll_bnx2; +#endif + + if ((rc = register_netdev(dev))) { + printk(KERN_ERR PFX "Cannot register net device\n"); + if (bp->regview) + iounmap(bp->regview); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + free_netdev(dev); + return rc; + } + + pci_set_drvdata(pdev, dev); + + memcpy(dev->dev_addr, bp->mac_addr, 6); + bp->name = board_info[ent->driver_data].name, + printk(KERN_INFO "%s: %s (%c%d) PCI%s %s %dMHz found at mem %lx, " + "IRQ %d, ", + dev->name, + bp->name, + ((CHIP_ID(bp) & 0xf000) >> 12) + 'A', + ((CHIP_ID(bp) & 0x0ff0) >> 4), + ((bp->flags & PCIX_FLAG) ? "-X" : ""), + ((bp->flags & PCI_32BIT_FLAG) ? "32-bit" : "64-bit"), + bp->bus_speed_mhz, + dev->base_addr, + bp->pdev->irq); + + printk("node addr "); + for (i = 0; i < 6; i++) + printk("%2.2x", dev->dev_addr[i]); + printk("\n"); + + dev->features |= NETIF_F_SG; + if (bp->flags & USING_DAC_FLAG) + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_IP_CSUM; +#ifdef BCM_VLAN + dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX; +#endif +#ifdef BCM_TSO + dev->features |= NETIF_F_TSO; +#endif + + netif_carrier_off(bp->dev); + + return 0; +} + +static void __devexit +bnx2_remove_one(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + unregister_netdev(dev); + + if (bp->regview) + iounmap(bp->regview); + + free_netdev(dev); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +} + +static int +bnx2_suspend(struct pci_dev *pdev, u32 state) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + u32 reset_code; + + if (!netif_running(dev)) + return 0; + + bnx2_netif_stop(bp); + netif_device_detach(dev); + del_timer_sync(&bp->timer); + if (bp->wol) + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_WOL; + else + reset_code = BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL; + bnx2_reset_chip(bp, reset_code); + bnx2_free_skbs(bp); + bnx2_set_power_state(bp, state); + return 0; +} + +static int +bnx2_resume(struct pci_dev *pdev) +{ + struct net_device *dev = pci_get_drvdata(pdev); + struct bnx2 *bp = dev->priv; + + if (!netif_running(dev)) + return 0; + + bnx2_set_power_state(bp, 0); + netif_device_attach(dev); + bnx2_init_nic(bp); + bnx2_netif_start(bp); + return 0; +} + +static struct pci_driver bnx2_pci_driver = { + name: DRV_MODULE_NAME, + id_table: bnx2_pci_tbl, + probe: bnx2_init_one, + remove: __devexit_p(bnx2_remove_one), + suspend: bnx2_suspend, + resume: bnx2_resume, +}; + +static int __init bnx2_init(void) +{ + return pci_module_init(&bnx2_pci_driver); +} + +static void __exit bnx2_cleanup(void) +{ + pci_unregister_driver(&bnx2_pci_driver); +} + +module_init(bnx2_init); +module_exit(bnx2_cleanup); + + + diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h new file mode 100644 index 00000000000..8214a2853d0 --- /dev/null +++ b/drivers/net/bnx2.h @@ -0,0 +1,4352 @@ +/* bnx2.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation. + * + * Written by: Michael Chan (mchan@broadcom.com) + */ + + +#ifndef BNX2_H +#define BNX2_H + +#include <linux/config.h> + +#include <linux/module.h> +#include <linux/moduleparam.h> + +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/errno.h> +#include <linux/ioport.h> +#include <linux/slab.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/dma-mapping.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <linux/delay.h> +#include <asm/byteorder.h> +#include <linux/time.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#ifdef NETIF_F_HW_VLAN_TX +#include <linux/if_vlan.h> +#define BCM_VLAN 1 +#endif +#ifdef NETIF_F_TSO +#include <net/ip.h> +#include <net/tcp.h> +#include <net/checksum.h> +#define BCM_TSO 1 +#endif +#include <linux/workqueue.h> +#include <linux/crc32.h> + +/* Hardware data structures and register definitions automatically + * generated from RTL code. Do not modify. + */ + +/* + * tx_bd definition + */ +struct tx_bd { + u32 tx_bd_haddr_hi; + u32 tx_bd_haddr_lo; + u32 tx_bd_mss_nbytes; + u32 tx_bd_vlan_tag_flags; + #define TX_BD_FLAGS_CONN_FAULT (1<<0) + #define TX_BD_FLAGS_TCP_UDP_CKSUM (1<<1) + #define TX_BD_FLAGS_IP_CKSUM (1<<2) + #define TX_BD_FLAGS_VLAN_TAG (1<<3) + #define TX_BD_FLAGS_COAL_NOW (1<<4) + #define TX_BD_FLAGS_DONT_GEN_CRC (1<<5) + #define TX_BD_FLAGS_END (1<<6) + #define TX_BD_FLAGS_START (1<<7) + #define TX_BD_FLAGS_SW_OPTION_WORD (0x1f<<8) + #define TX_BD_FLAGS_SW_FLAGS (1<<13) + #define TX_BD_FLAGS_SW_SNAP (1<<14) + #define TX_BD_FLAGS_SW_LSO (1<<15) + +}; + + +/* + * rx_bd definition + */ +struct rx_bd { + u32 rx_bd_haddr_hi; + u32 rx_bd_haddr_lo; + u32 rx_bd_len; + u32 rx_bd_flags; + #define RX_BD_FLAGS_NOPUSH (1<<0) + #define RX_BD_FLAGS_DUMMY (1<<1) + #define RX_BD_FLAGS_END (1<<2) + #define RX_BD_FLAGS_START (1<<3) + +}; + + +/* + * status_block definition + */ +struct status_block { + u32 status_attn_bits; + #define STATUS_ATTN_BITS_LINK_STATE (1L<<0) + #define STATUS_ATTN_BITS_TX_SCHEDULER_ABORT (1L<<1) + #define STATUS_ATTN_BITS_TX_BD_READ_ABORT (1L<<2) + #define STATUS_ATTN_BITS_TX_BD_CACHE_ABORT (1L<<3) + #define STATUS_ATTN_BITS_TX_PROCESSOR_ABORT (1L<<4) + #define STATUS_ATTN_BITS_TX_DMA_ABORT (1L<<5) + #define STATUS_ATTN_BITS_TX_PATCHUP_ABORT (1L<<6) + #define STATUS_ATTN_BITS_TX_ASSEMBLER_ABORT (1L<<7) + #define STATUS_ATTN_BITS_RX_PARSER_MAC_ABORT (1L<<8) + #define STATUS_ATTN_BITS_RX_PARSER_CATCHUP_ABORT (1L<<9) + #define STATUS_ATTN_BITS_RX_MBUF_ABORT (1L<<10) + #define STATUS_ATTN_BITS_RX_LOOKUP_ABORT (1L<<11) + #define STATUS_ATTN_BITS_RX_PROCESSOR_ABORT (1L<<12) + #define STATUS_ATTN_BITS_RX_V2P_ABORT (1L<<13) + #define STATUS_ATTN_BITS_RX_BD_CACHE_ABORT (1L<<14) + #define STATUS_ATTN_BITS_RX_DMA_ABORT (1L<<15) + #define STATUS_ATTN_BITS_COMPLETION_ABORT (1L<<16) + #define STATUS_ATTN_BITS_HOST_COALESCE_ABORT (1L<<17) + #define STATUS_ATTN_BITS_MAILBOX_QUEUE_ABORT (1L<<18) + #define STATUS_ATTN_BITS_CONTEXT_ABORT (1L<<19) + #define STATUS_ATTN_BITS_CMD_SCHEDULER_ABORT (1L<<20) + #define STATUS_ATTN_BITS_CMD_PROCESSOR_ABORT (1L<<21) + #define STATUS_ATTN_BITS_MGMT_PROCESSOR_ABORT (1L<<22) + #define STATUS_ATTN_BITS_MAC_ABORT (1L<<23) + #define STATUS_ATTN_BITS_TIMER_ABORT (1L<<24) + #define STATUS_ATTN_BITS_DMAE_ABORT (1L<<25) + #define STATUS_ATTN_BITS_FLSH_ABORT (1L<<26) + #define STATUS_ATTN_BITS_GRC_ABORT (1L<<27) + #define STATUS_ATTN_BITS_PARITY_ERROR (1L<<31) + + u32 status_attn_bits_ack; +#if defined(__BIG_ENDIAN) + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index2; + u16 status_tx_quick_consumer_index3; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index14; + u16 status_rx_quick_consumer_index15; + u16 status_completion_producer_index; + u16 status_cmd_consumer_index; + u16 status_idx; + u16 status_unused; +#elif defined(__LITTLE_ENDIAN) + u16 status_tx_quick_consumer_index1; + u16 status_tx_quick_consumer_index0; + u16 status_tx_quick_consumer_index3; + u16 status_tx_quick_consumer_index2; + u16 status_rx_quick_consumer_index1; + u16 status_rx_quick_consumer_index0; + u16 status_rx_quick_consumer_index3; + u16 status_rx_quick_consumer_index2; + u16 status_rx_quick_consumer_index5; + u16 status_rx_quick_consumer_index4; + u16 status_rx_quick_consumer_index7; + u16 status_rx_quick_consumer_index6; + u16 status_rx_quick_consumer_index9; + u16 status_rx_quick_consumer_index8; + u16 status_rx_quick_consumer_index11; + u16 status_rx_quick_consumer_index10; + u16 status_rx_quick_consumer_index13; + u16 status_rx_quick_consumer_index12; + u16 status_rx_quick_consumer_index15; + u16 status_rx_quick_consumer_index14; + u16 status_cmd_consumer_index; + u16 status_completion_producer_index; + u16 status_unused; + u16 status_idx; +#endif +}; + + +/* + * statistics_block definition + */ +struct statistics_block { + u32 stat_IfHCInOctets_hi; + u32 stat_IfHCInOctets_lo; + u32 stat_IfHCInBadOctets_hi; + u32 stat_IfHCInBadOctets_lo; + u32 stat_IfHCOutOctets_hi; + u32 stat_IfHCOutOctets_lo; + u32 stat_IfHCOutBadOctets_hi; + u32 stat_IfHCOutBadOctets_lo; + u32 stat_IfHCInUcastPkts_hi; + u32 stat_IfHCInUcastPkts_lo; + u32 stat_IfHCInMulticastPkts_hi; + u32 stat_IfHCInMulticastPkts_lo; + u32 stat_IfHCInBroadcastPkts_hi; + u32 stat_IfHCInBroadcastPkts_lo; + u32 stat_IfHCOutUcastPkts_hi; + u32 stat_IfHCOutUcastPkts_lo; + u32 stat_IfHCOutMulticastPkts_hi; + u32 stat_IfHCOutMulticastPkts_lo; + u32 stat_IfHCOutBroadcastPkts_hi; + u32 stat_IfHCOutBroadcastPkts_lo; + u32 stat_emac_tx_stat_dot3statsinternalmactransmiterrors; + u32 stat_Dot3StatsCarrierSenseErrors; + u32 stat_Dot3StatsFCSErrors; + u32 stat_Dot3StatsAlignmentErrors; + u32 stat_Dot3StatsSingleCollisionFrames; + u32 stat_Dot3StatsMultipleCollisionFrames; + u32 stat_Dot3StatsDeferredTransmissions; + u32 stat_Dot3StatsExcessiveCollisions; + u32 stat_Dot3StatsLateCollisions; + u32 stat_EtherStatsCollisions; + u32 stat_EtherStatsFragments; + u32 stat_EtherStatsJabbers; + u32 stat_EtherStatsUndersizePkts; + u32 stat_EtherStatsOverrsizePkts; + u32 stat_EtherStatsPktsRx64Octets; + u32 stat_EtherStatsPktsRx65Octetsto127Octets; + u32 stat_EtherStatsPktsRx128Octetsto255Octets; + u32 stat_EtherStatsPktsRx256Octetsto511Octets; + u32 stat_EtherStatsPktsRx512Octetsto1023Octets; + u32 stat_EtherStatsPktsRx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsRx1523Octetsto9022Octets; + u32 stat_EtherStatsPktsTx64Octets; + u32 stat_EtherStatsPktsTx65Octetsto127Octets; + u32 stat_EtherStatsPktsTx128Octetsto255Octets; + u32 stat_EtherStatsPktsTx256Octetsto511Octets; + u32 stat_EtherStatsPktsTx512Octetsto1023Octets; + u32 stat_EtherStatsPktsTx1024Octetsto1522Octets; + u32 stat_EtherStatsPktsTx1523Octetsto9022Octets; + u32 stat_XonPauseFramesReceived; + u32 stat_XoffPauseFramesReceived; + u32 stat_OutXonSent; + u32 stat_OutXoffSent; + u32 stat_FlowControlDone; + u32 stat_MacControlFramesReceived; + u32 stat_XoffStateEntered; + u32 stat_IfInFramesL2FilterDiscards; + u32 stat_IfInRuleCheckerDiscards; + u32 stat_IfInFTQDiscards; + u32 stat_IfInMBUFDiscards; + u32 stat_IfInRuleCheckerP4Hit; + u32 stat_CatchupInRuleCheckerDiscards; + u32 stat_CatchupInFTQDiscards; + u32 stat_CatchupInMBUFDiscards; + u32 stat_CatchupInRuleCheckerP4Hit; + u32 stat_GenStat00; + u32 stat_GenStat01; + u32 stat_GenStat02; + u32 stat_GenStat03; + u32 stat_GenStat04; + u32 stat_GenStat05; + u32 stat_GenStat06; + u32 stat_GenStat07; + u32 stat_GenStat08; + u32 stat_GenStat09; + u32 stat_GenStat10; + u32 stat_GenStat11; + u32 stat_GenStat12; + u32 stat_GenStat13; + u32 stat_GenStat14; + u32 stat_GenStat15; +}; + + +/* + * l2_fhdr definition + */ +struct l2_fhdr { +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_errors; + u16 l2_fhdr_status; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_status; + u16 l2_fhdr_errors; +#endif + #define L2_FHDR_ERRORS_BAD_CRC (1<<1) + #define L2_FHDR_ERRORS_PHY_DECODE (1<<2) + #define L2_FHDR_ERRORS_ALIGNMENT (1<<3) + #define L2_FHDR_ERRORS_TOO_SHORT (1<<4) + #define L2_FHDR_ERRORS_GIANT_FRAME (1<<5) + + #define L2_FHDR_STATUS_RULE_CLASS (0x7<<0) + #define L2_FHDR_STATUS_RULE_P2 (1<<3) + #define L2_FHDR_STATUS_RULE_P3 (1<<4) + #define L2_FHDR_STATUS_RULE_P4 (1<<5) + #define L2_FHDR_STATUS_L2_VLAN_TAG (1<<6) + #define L2_FHDR_STATUS_L2_LLC_SNAP (1<<7) + #define L2_FHDR_STATUS_RSS_HASH (1<<8) + #define L2_FHDR_STATUS_IP_DATAGRAM (1<<13) + #define L2_FHDR_STATUS_TCP_SEGMENT (1<<14) + #define L2_FHDR_STATUS_UDP_DATAGRAM (1<<15) + + u32 l2_fhdr_hash; +#if defined(__BIG_ENDIAN) + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_ip_xsum; + u16 l2_fhdr_tcp_udp_xsum; +#elif defined(__LITTLE_ENDIAN) + u16 l2_fhdr_vlan_tag; + u16 l2_fhdr_pkt_len; + u16 l2_fhdr_tcp_udp_xsum; + u16 l2_fhdr_ip_xsum; +#endif +}; + + +/* + * l2_context definition + */ +#define BNX2_L2CTX_TYPE 0x00000000 +#define BNX2_L2CTX_TYPE_SIZE_L2 ((0xc0/0x20)<<16) +#define BNX2_L2CTX_TYPE_TYPE (0xf<<28) +#define BNX2_L2CTX_TYPE_TYPE_EMPTY (0<<28) +#define BNX2_L2CTX_TYPE_TYPE_L2 (1<<28) + +#define BNX2_L2CTX_TX_HOST_BIDX 0x00000088 +#define BNX2_L2CTX_EST_NBD 0x00000088 +#define BNX2_L2CTX_CMD_TYPE 0x00000088 +#define BNX2_L2CTX_CMD_TYPE_TYPE (0xf<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_L2 (0<<24) +#define BNX2_L2CTX_CMD_TYPE_TYPE_TCP (1<<24) + +#define BNX2_L2CTX_TX_HOST_BSEQ 0x00000090 +#define BNX2_L2CTX_TSCH_BSEQ 0x00000094 +#define BNX2_L2CTX_TBDR_BSEQ 0x00000098 +#define BNX2_L2CTX_TBDR_BOFF 0x0000009c +#define BNX2_L2CTX_TBDR_BIDX 0x0000009c +#define BNX2_L2CTX_TBDR_BHADDR_HI 0x000000a0 +#define BNX2_L2CTX_TBDR_BHADDR_LO 0x000000a4 +#define BNX2_L2CTX_TXP_BOFF 0x000000a8 +#define BNX2_L2CTX_TXP_BIDX 0x000000a8 +#define BNX2_L2CTX_TXP_BSEQ 0x000000ac + + +/* + * l2_bd_chain_context definition + */ +#define BNX2_L2CTX_BD_PRE_READ 0x00000000 +#define BNX2_L2CTX_CTX_SIZE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE 0x00000000 +#define BNX2_L2CTX_CTX_TYPE_SIZE_L2 ((0x20/20)<<16) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE (0xf<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_UNDEFINED (0<<28) +#define BNX2_L2CTX_CTX_TYPE_CTX_BD_CHN_TYPE_VALUE (1<<28) + +#define BNX2_L2CTX_HOST_BDIDX 0x00000004 +#define BNX2_L2CTX_HOST_BSEQ 0x00000008 +#define BNX2_L2CTX_NX_BSEQ 0x0000000c +#define BNX2_L2CTX_NX_BDHADDR_HI 0x00000010 +#define BNX2_L2CTX_NX_BDHADDR_LO 0x00000014 +#define BNX2_L2CTX_NX_BDIDX 0x00000018 + + +/* + * pci_config_l definition + * offset: 0000 + */ +#define BNX2_PCICFG_MISC_CONFIG 0x00000068 +#define BNX2_PCICFG_MISC_CONFIG_TARGET_BYTE_SWAP (1L<<2) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_MB_WORD_SWAP (1L<<3) +#define BNX2_PCICFG_MISC_CONFIG_CLOCK_CTL_ENA (1L<<5) +#define BNX2_PCICFG_MISC_CONFIG_TARGET_GRC_WORD_SWAP (1L<<6) +#define BNX2_PCICFG_MISC_CONFIG_REG_WINDOW_ENA (1L<<7) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_REQ (1L<<8) +#define BNX2_PCICFG_MISC_CONFIG_CORE_RST_BSY (1L<<9) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_METAL_REV (0xffL<<16) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_BASE_REV (0xfL<<24) +#define BNX2_PCICFG_MISC_CONFIG_ASIC_ID (0xfL<<28) + +#define BNX2_PCICFG_MISC_STATUS 0x0000006c +#define BNX2_PCICFG_MISC_STATUS_INTA_VALUE (1L<<0) +#define BNX2_PCICFG_MISC_STATUS_32BIT_DET (1L<<1) +#define BNX2_PCICFG_MISC_STATUS_M66EN (1L<<2) +#define BNX2_PCICFG_MISC_STATUS_PCIX_DET (1L<<3) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED (0x3L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_66 (0L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_100 (1L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_133 (2L<<4) +#define BNX2_PCICFG_MISC_STATUS_PCIX_SPEED_PCI_MODE (3L<<4) + +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS 0x00000070 +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_PCICFG_PCI_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_PCICFG_REG_WINDOW_ADDRESS 0x00000078 +#define BNX2_PCICFG_REG_WINDOW 0x00000080 +#define BNX2_PCICFG_INT_ACK_CMD 0x00000084 +#define BNX2_PCICFG_INT_ACK_CMD_INDEX (0xffffL<<0) +#define BNX2_PCICFG_INT_ACK_CMD_INDEX_VALID (1L<<16) +#define BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM (1L<<17) +#define BNX2_PCICFG_INT_ACK_CMD_MASK_INT (1L<<18) + +#define BNX2_PCICFG_STATUS_BIT_SET_CMD 0x00000088 +#define BNX2_PCICFG_STATUS_BIT_CLEAR_CMD 0x0000008c +#define BNX2_PCICFG_MAILBOX_QUEUE_ADDR 0x00000090 +#define BNX2_PCICFG_MAILBOX_QUEUE_DATA 0x00000094 + + +/* + * pci_reg definition + * offset: 0x400 + */ +#define BNX2_PCI_GRC_WINDOW_ADDR 0x00000400 +#define BNX2_PCI_GRC_WINDOW_ADDR_PCI_GRC_WINDOW_ADDR_VALUE (0x3ffffL<<8) + +#define BNX2_PCI_CONFIG_1 0x00000404 +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY (0x7L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_OFF (0L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_16 (1L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_32 (2L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_64 (3L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_128 (4L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_256 (5L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_512 (6L<<8) +#define BNX2_PCI_CONFIG_1_READ_BOUNDARY_1024 (7L<<8) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY (0x7L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_OFF (0L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_16 (1L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_32 (2L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_64 (3L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_128 (4L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_256 (5L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_512 (6L<<11) +#define BNX2_PCI_CONFIG_1_WRITE_BOUNDARY_1024 (7L<<11) + +#define BNX2_PCI_CONFIG_2 0x00000408 +#define BNX2_PCI_CONFIG_2_BAR1_SIZE (0xfL<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_DISABLED (0L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64K (1L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128K (2L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256K (3L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512K (4L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1M (5L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_2M (6L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_4M (7L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_8M (8L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_16M (9L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_32M (10L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_64M (11L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_128M (12L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_256M (13L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_512M (14L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_SIZE_1G (15L<<0) +#define BNX2_PCI_CONFIG_2_BAR1_64ENA (1L<<4) +#define BNX2_PCI_CONFIG_2_EXP_ROM_RETRY (1L<<5) +#define BNX2_PCI_CONFIG_2_CFG_CYCLE_RETRY (1L<<6) +#define BNX2_PCI_CONFIG_2_FIRST_CFG_DONE (1L<<7) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE (0xffL<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_DISABLED (0L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1K (1L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2K (2L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4K (3L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8K (4L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16K (5L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_32K (6L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_64K (7L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_128K (8L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_256K (9L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_512K (10L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_1M (11L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_2M (12L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_4M (13L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_8M (14L<<8) +#define BNX2_PCI_CONFIG_2_EXP_ROM_SIZE_16M (15L<<8) +#define BNX2_PCI_CONFIG_2_MAX_SPLIT_LIMIT (0x1fL<<16) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT (0x3L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_512 (0L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_1K (1L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_2K (2L<<21) +#define BNX2_PCI_CONFIG_2_MAX_READ_LIMIT_4K (3L<<21) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_MSTR (1L<<23) +#define BNX2_PCI_CONFIG_2_FORCE_32_BIT_TGT (1L<<24) +#define BNX2_PCI_CONFIG_2_KEEP_REQ_ASSERT (1L<<25) + +#define BNX2_PCI_CONFIG_3 0x0000040c +#define BNX2_PCI_CONFIG_3_STICKY_BYTE (0xffL<<0) +#define BNX2_PCI_CONFIG_3_FORCE_PME (1L<<24) +#define BNX2_PCI_CONFIG_3_PME_STATUS (1L<<25) +#define BNX2_PCI_CONFIG_3_PME_ENABLE (1L<<26) +#define BNX2_PCI_CONFIG_3_PM_STATE (0x3L<<27) +#define BNX2_PCI_CONFIG_3_VAUX_PRESET (1L<<30) +#define BNX2_PCI_CONFIG_3_PCI_POWER (1L<<31) + +#define BNX2_PCI_PM_DATA_A 0x00000410 +#define BNX2_PCI_PM_DATA_A_PM_DATA_0_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_A_PM_DATA_1_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_A_PM_DATA_2_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_A_PM_DATA_3_PRG (0xffL<<24) + +#define BNX2_PCI_PM_DATA_B 0x00000414 +#define BNX2_PCI_PM_DATA_B_PM_DATA_4_PRG (0xffL<<0) +#define BNX2_PCI_PM_DATA_B_PM_DATA_5_PRG (0xffL<<8) +#define BNX2_PCI_PM_DATA_B_PM_DATA_6_PRG (0xffL<<16) +#define BNX2_PCI_PM_DATA_B_PM_DATA_7_PRG (0xffL<<24) + +#define BNX2_PCI_SWAP_DIAG0 0x00000418 +#define BNX2_PCI_SWAP_DIAG1 0x0000041c +#define BNX2_PCI_EXP_ROM_ADDR 0x00000420 +#define BNX2_PCI_EXP_ROM_ADDR_ADDRESS (0x3fffffL<<2) +#define BNX2_PCI_EXP_ROM_ADDR_REQ (1L<<31) + +#define BNX2_PCI_EXP_ROM_DATA 0x00000424 +#define BNX2_PCI_VPD_INTF 0x00000428 +#define BNX2_PCI_VPD_INTF_INTF_REQ (1L<<0) + +#define BNX2_PCI_VPD_ADDR_FLAG 0x0000042c +#define BNX2_PCI_VPD_ADDR_FLAG_ADDRESS (0x1fff<<2) +#define BNX2_PCI_VPD_ADDR_FLAG_WR (1<<15) + +#define BNX2_PCI_VPD_DATA 0x00000430 +#define BNX2_PCI_ID_VAL1 0x00000434 +#define BNX2_PCI_ID_VAL1_DEVICE_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL1_VENDOR_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL2 0x00000438 +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_VENDOR_ID (0xffffL<<0) +#define BNX2_PCI_ID_VAL2_SUBSYSTEM_ID (0xffffL<<16) + +#define BNX2_PCI_ID_VAL3 0x0000043c +#define BNX2_PCI_ID_VAL3_CLASS_CODE (0xffffffL<<0) +#define BNX2_PCI_ID_VAL3_REVISION_ID (0xffL<<24) + +#define BNX2_PCI_ID_VAL4 0x00000440 +#define BNX2_PCI_ID_VAL4_CAP_ENA (0xfL<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_0 (0L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_1 (1L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_2 (2L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_3 (3L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_4 (4L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_5 (5L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_6 (6L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_7 (7L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_8 (8L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_9 (9L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_10 (10L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_11 (11L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_12 (12L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_13 (13L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_14 (14L<<0) +#define BNX2_PCI_ID_VAL4_CAP_ENA_15 (15L<<0) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG (0x3L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_0 (0L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_1 (1L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_2 (2L<<6) +#define BNX2_PCI_ID_VAL4_PM_SCALE_PRG_3 (3L<<6) +#define BNX2_PCI_ID_VAL4_MSI_LIMIT (0x7L<<9) +#define BNX2_PCI_ID_VAL4_MSI_ADVERTIZE (0x7L<<12) +#define BNX2_PCI_ID_VAL4_MSI_ENABLE (1L<<15) +#define BNX2_PCI_ID_VAL4_MAX_64_ADVERTIZE (1L<<16) +#define BNX2_PCI_ID_VAL4_MAX_133_ADVERTIZE (1L<<17) +#define BNX2_PCI_ID_VAL4_MAX_MEM_READ_SIZE (0x3L<<21) +#define BNX2_PCI_ID_VAL4_MAX_SPLIT_SIZE (0x7L<<23) +#define BNX2_PCI_ID_VAL4_MAX_CUMULATIVE_SIZE (0x7L<<26) + +#define BNX2_PCI_ID_VAL5 0x00000444 +#define BNX2_PCI_ID_VAL5_D1_SUPPORT (1L<<0) +#define BNX2_PCI_ID_VAL5_D2_SUPPORT (1L<<1) +#define BNX2_PCI_ID_VAL5_PME_IN_D0 (1L<<2) +#define BNX2_PCI_ID_VAL5_PME_IN_D1 (1L<<3) +#define BNX2_PCI_ID_VAL5_PME_IN_D2 (1L<<4) +#define BNX2_PCI_ID_VAL5_PME_IN_D3_HOT (1L<<5) + +#define BNX2_PCI_PCIX_EXTENDED_STATUS 0x00000448 +#define BNX2_PCI_PCIX_EXTENDED_STATUS_NO_SNOOP (1L<<8) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_LONG_BURST (1L<<9) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_CLASS (0xfL<<16) +#define BNX2_PCI_PCIX_EXTENDED_STATUS_SPLIT_COMP_MSG_IDX (0xffL<<24) + +#define BNX2_PCI_ID_VAL6 0x0000044c +#define BNX2_PCI_ID_VAL6_MAX_LAT (0xffL<<0) +#define BNX2_PCI_ID_VAL6_MIN_GNT (0xffL<<8) +#define BNX2_PCI_ID_VAL6_BIST (0xffL<<16) + +#define BNX2_PCI_MSI_DATA 0x00000450 +#define BNX2_PCI_MSI_DATA_PCI_MSI_DATA (0xffffL<<0) + +#define BNX2_PCI_MSI_ADDR_H 0x00000454 +#define BNX2_PCI_MSI_ADDR_L 0x00000458 + + +/* + * misc_reg definition + * offset: 0x800 + */ +#define BNX2_MISC_COMMAND 0x00000800 +#define BNX2_MISC_COMMAND_ENABLE_ALL (1L<<0) +#define BNX2_MISC_COMMAND_DISABLE_ALL (1L<<1) +#define BNX2_MISC_COMMAND_CORE_RESET (1L<<4) +#define BNX2_MISC_COMMAND_HARD_RESET (1L<<5) +#define BNX2_MISC_COMMAND_PAR_ERROR (1L<<8) +#define BNX2_MISC_COMMAND_PAR_ERR_RAM (0x7fL<<16) + +#define BNX2_MISC_CFG 0x00000804 +#define BNX2_MISC_CFG_PCI_GRC_TMOUT (1L<<0) +#define BNX2_MISC_CFG_NVM_WR_EN (0x3L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PROTECT (0L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_PCI (1L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW (2L<<1) +#define BNX2_MISC_CFG_NVM_WR_EN_ALLOW2 (3L<<1) +#define BNX2_MISC_CFG_BIST_EN (1L<<3) +#define BNX2_MISC_CFG_CK25_OUT_ALT_SRC (1L<<4) +#define BNX2_MISC_CFG_BYPASS_BSCAN (1L<<5) +#define BNX2_MISC_CFG_BYPASS_EJTAG (1L<<6) +#define BNX2_MISC_CFG_CLK_CTL_OVERRIDE (1L<<7) +#define BNX2_MISC_CFG_LEDMODE (0x3L<<8) +#define BNX2_MISC_CFG_LEDMODE_MAC (0L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY1 (1L<<8) +#define BNX2_MISC_CFG_LEDMODE_GPHY2 (2L<<8) + +#define BNX2_MISC_ID 0x00000808 +#define BNX2_MISC_ID_BOND_ID (0xfL<<0) +#define BNX2_MISC_ID_CHIP_METAL (0xffL<<4) +#define BNX2_MISC_ID_CHIP_REV (0xfL<<12) +#define BNX2_MISC_ID_CHIP_NUM (0xffffL<<16) + +#define BNX2_MISC_ENABLE_STATUS_BITS 0x0000080c +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_STATUS_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_STATUS_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_STATUS_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_STATUS_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_STATUS_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_STATUS_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_STATUS_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_STATUS_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_STATUS_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_STATUS_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_STATUS_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_STATUS_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_SET_BITS 0x00000810 +#define BNX2_MISC_ENABLE_SET_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_SET_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_SET_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_SET_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_SET_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_SET_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_SET_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_SET_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_SET_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_SET_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_SET_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_SET_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_SET_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_SET_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_SET_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_SET_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_SET_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_SET_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_SET_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_SET_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_SET_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_SET_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ENABLE_CLR_BITS 0x00000814 +#define BNX2_MISC_ENABLE_CLR_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_ENABLE_CLR_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_ENABLE_CLR_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_ENABLE_CLR_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_ENABLE_CLR_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_ENABLE_CLR_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_ENABLE_CLR_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_ENABLE_CLR_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_ENABLE_CLR_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_ENABLE_CLR_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_ENABLE_CLR_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_ENABLE_CLR_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_ENABLE_CLR_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_CLOCK_CONTROL_BITS 0x00000818 +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_32MHZ (0L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_38MHZ (1L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_48MHZ (2L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_55MHZ (3L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_66MHZ (4L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_80MHZ (5L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_95MHZ (6L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_133MHZ (7L<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_CLK_SPD_DET_LOW (0xfL<<0) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_DISABLE (1L<<6) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT (1L<<7) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC (0x7L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_UNDEF (0L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_12 (1L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_6 (2L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_ALT_SRC_62 (4L<<8) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PLAY_DEAD (1L<<11) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED (0xfL<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_100 (0L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_80 (1L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_50 (2L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_40 (4L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_SPEED_25 (8L<<12) +#define BNX2_MISC_CLOCK_CONTROL_BITS_CORE_CLK_PLL_STOP (1L<<16) +#define BNX2_MISC_CLOCK_CONTROL_BITS_PCI_PLL_STOP (1L<<17) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED_18 (1L<<18) +#define BNX2_MISC_CLOCK_CONTROL_BITS_USE_SPD_DET (1L<<19) +#define BNX2_MISC_CLOCK_CONTROL_BITS_RESERVED (0xfffL<<20) + +#define BNX2_MISC_GPIO 0x0000081c +#define BNX2_MISC_GPIO_VALUE (0xffL<<0) +#define BNX2_MISC_GPIO_SET (0xffL<<8) +#define BNX2_MISC_GPIO_CLR (0xffL<<16) +#define BNX2_MISC_GPIO_FLOAT (0xffL<<24) + +#define BNX2_MISC_GPIO_INT 0x00000820 +#define BNX2_MISC_GPIO_INT_INT_STATE (0xfL<<0) +#define BNX2_MISC_GPIO_INT_OLD_VALUE (0xfL<<8) +#define BNX2_MISC_GPIO_INT_OLD_SET (0xfL<<16) +#define BNX2_MISC_GPIO_INT_OLD_CLR (0xfL<<24) + +#define BNX2_MISC_CONFIG_LFSR 0x00000824 +#define BNX2_MISC_CONFIG_LFSR_DIV (0xffffL<<0) + +#define BNX2_MISC_LFSR_MASK_BITS 0x00000828 +#define BNX2_MISC_LFSR_MASK_BITS_TX_SCHEDULER_ENABLE (1L<<0) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_READ_ENABLE (1L<<1) +#define BNX2_MISC_LFSR_MASK_BITS_TX_BD_CACHE_ENABLE (1L<<2) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PROCESSOR_ENABLE (1L<<3) +#define BNX2_MISC_LFSR_MASK_BITS_TX_DMA_ENABLE (1L<<4) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PATCHUP_ENABLE (1L<<5) +#define BNX2_MISC_LFSR_MASK_BITS_TX_PAYLOAD_Q_ENABLE (1L<<6) +#define BNX2_MISC_LFSR_MASK_BITS_TX_HEADER_Q_ENABLE (1L<<7) +#define BNX2_MISC_LFSR_MASK_BITS_TX_ASSEMBLER_ENABLE (1L<<8) +#define BNX2_MISC_LFSR_MASK_BITS_EMAC_ENABLE (1L<<9) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_MAC_ENABLE (1L<<10) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PARSER_CATCHUP_ENABLE (1L<<11) +#define BNX2_MISC_LFSR_MASK_BITS_RX_MBUF_ENABLE (1L<<12) +#define BNX2_MISC_LFSR_MASK_BITS_RX_LOOKUP_ENABLE (1L<<13) +#define BNX2_MISC_LFSR_MASK_BITS_RX_PROCESSOR_ENABLE (1L<<14) +#define BNX2_MISC_LFSR_MASK_BITS_RX_V2P_ENABLE (1L<<15) +#define BNX2_MISC_LFSR_MASK_BITS_RX_BD_CACHE_ENABLE (1L<<16) +#define BNX2_MISC_LFSR_MASK_BITS_RX_DMA_ENABLE (1L<<17) +#define BNX2_MISC_LFSR_MASK_BITS_COMPLETION_ENABLE (1L<<18) +#define BNX2_MISC_LFSR_MASK_BITS_HOST_COALESCE_ENABLE (1L<<19) +#define BNX2_MISC_LFSR_MASK_BITS_MAILBOX_QUEUE_ENABLE (1L<<20) +#define BNX2_MISC_LFSR_MASK_BITS_CONTEXT_ENABLE (1L<<21) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_SCHEDULER_ENABLE (1L<<22) +#define BNX2_MISC_LFSR_MASK_BITS_CMD_PROCESSOR_ENABLE (1L<<23) +#define BNX2_MISC_LFSR_MASK_BITS_MGMT_PROCESSOR_ENABLE (1L<<24) +#define BNX2_MISC_LFSR_MASK_BITS_TIMER_ENABLE (1L<<25) +#define BNX2_MISC_LFSR_MASK_BITS_DMA_ENGINE_ENABLE (1L<<26) +#define BNX2_MISC_LFSR_MASK_BITS_UMP_ENABLE (1L<<27) + +#define BNX2_MISC_ARB_REQ0 0x0000082c +#define BNX2_MISC_ARB_REQ1 0x00000830 +#define BNX2_MISC_ARB_REQ2 0x00000834 +#define BNX2_MISC_ARB_REQ3 0x00000838 +#define BNX2_MISC_ARB_REQ4 0x0000083c +#define BNX2_MISC_ARB_FREE0 0x00000840 +#define BNX2_MISC_ARB_FREE1 0x00000844 +#define BNX2_MISC_ARB_FREE2 0x00000848 +#define BNX2_MISC_ARB_FREE3 0x0000084c +#define BNX2_MISC_ARB_FREE4 0x00000850 +#define BNX2_MISC_ARB_REQ_STATUS0 0x00000854 +#define BNX2_MISC_ARB_REQ_STATUS1 0x00000858 +#define BNX2_MISC_ARB_REQ_STATUS2 0x0000085c +#define BNX2_MISC_ARB_REQ_STATUS3 0x00000860 +#define BNX2_MISC_ARB_REQ_STATUS4 0x00000864 +#define BNX2_MISC_ARB_GNT0 0x00000868 +#define BNX2_MISC_ARB_GNT0_0 (0x7L<<0) +#define BNX2_MISC_ARB_GNT0_1 (0x7L<<4) +#define BNX2_MISC_ARB_GNT0_2 (0x7L<<8) +#define BNX2_MISC_ARB_GNT0_3 (0x7L<<12) +#define BNX2_MISC_ARB_GNT0_4 (0x7L<<16) +#define BNX2_MISC_ARB_GNT0_5 (0x7L<<20) +#define BNX2_MISC_ARB_GNT0_6 (0x7L<<24) +#define BNX2_MISC_ARB_GNT0_7 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT1 0x0000086c +#define BNX2_MISC_ARB_GNT1_8 (0x7L<<0) +#define BNX2_MISC_ARB_GNT1_9 (0x7L<<4) +#define BNX2_MISC_ARB_GNT1_10 (0x7L<<8) +#define BNX2_MISC_ARB_GNT1_11 (0x7L<<12) +#define BNX2_MISC_ARB_GNT1_12 (0x7L<<16) +#define BNX2_MISC_ARB_GNT1_13 (0x7L<<20) +#define BNX2_MISC_ARB_GNT1_14 (0x7L<<24) +#define BNX2_MISC_ARB_GNT1_15 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT2 0x00000870 +#define BNX2_MISC_ARB_GNT2_16 (0x7L<<0) +#define BNX2_MISC_ARB_GNT2_17 (0x7L<<4) +#define BNX2_MISC_ARB_GNT2_18 (0x7L<<8) +#define BNX2_MISC_ARB_GNT2_19 (0x7L<<12) +#define BNX2_MISC_ARB_GNT2_20 (0x7L<<16) +#define BNX2_MISC_ARB_GNT2_21 (0x7L<<20) +#define BNX2_MISC_ARB_GNT2_22 (0x7L<<24) +#define BNX2_MISC_ARB_GNT2_23 (0x7L<<28) + +#define BNX2_MISC_ARB_GNT3 0x00000874 +#define BNX2_MISC_ARB_GNT3_24 (0x7L<<0) +#define BNX2_MISC_ARB_GNT3_25 (0x7L<<4) +#define BNX2_MISC_ARB_GNT3_26 (0x7L<<8) +#define BNX2_MISC_ARB_GNT3_27 (0x7L<<12) +#define BNX2_MISC_ARB_GNT3_28 (0x7L<<16) +#define BNX2_MISC_ARB_GNT3_29 (0x7L<<20) +#define BNX2_MISC_ARB_GNT3_30 (0x7L<<24) +#define BNX2_MISC_ARB_GNT3_31 (0x7L<<28) + +#define BNX2_MISC_PRBS_CONTROL 0x00000878 +#define BNX2_MISC_PRBS_CONTROL_EN (1L<<0) +#define BNX2_MISC_PRBS_CONTROL_RSTB (1L<<1) +#define BNX2_MISC_PRBS_CONTROL_INV (1L<<2) +#define BNX2_MISC_PRBS_CONTROL_ERR_CLR (1L<<3) +#define BNX2_MISC_PRBS_CONTROL_ORDER (0x3L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_7TH (0L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_15TH (1L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_23RD (2L<<4) +#define BNX2_MISC_PRBS_CONTROL_ORDER_31ST (3L<<4) + +#define BNX2_MISC_PRBS_STATUS 0x0000087c +#define BNX2_MISC_PRBS_STATUS_LOCK (1L<<0) +#define BNX2_MISC_PRBS_STATUS_STKY (1L<<1) +#define BNX2_MISC_PRBS_STATUS_ERRORS (0x3fffL<<2) +#define BNX2_MISC_PRBS_STATUS_STATE (0xfL<<16) + +#define BNX2_MISC_SM_ASF_CONTROL 0x00000880 +#define BNX2_MISC_SM_ASF_CONTROL_ASF_RST (1L<<0) +#define BNX2_MISC_SM_ASF_CONTROL_TSC_EN (1L<<1) +#define BNX2_MISC_SM_ASF_CONTROL_WG_TO (1L<<2) +#define BNX2_MISC_SM_ASF_CONTROL_HB_TO (1L<<3) +#define BNX2_MISC_SM_ASF_CONTROL_PA_TO (1L<<4) +#define BNX2_MISC_SM_ASF_CONTROL_PL_TO (1L<<5) +#define BNX2_MISC_SM_ASF_CONTROL_RT_TO (1L<<6) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EVENT (1L<<7) +#define BNX2_MISC_SM_ASF_CONTROL_RES (0xfL<<8) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EN (1L<<12) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_BB_EN (1L<<13) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_NO_ADDR_FILT (1L<<14) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_AUTOREAD (1L<<15) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR1 (0x3fL<<16) +#define BNX2_MISC_SM_ASF_CONTROL_NIC_SMB_ADDR2 (0x3fL<<24) +#define BNX2_MISC_SM_ASF_CONTROL_EN_NIC_SMB_ADDR_0 (1L<<30) +#define BNX2_MISC_SM_ASF_CONTROL_SMB_EARLY_ATTN (1L<<31) + +#define BNX2_MISC_SMB_IN 0x00000884 +#define BNX2_MISC_SMB_IN_DAT_IN (0xffL<<0) +#define BNX2_MISC_SMB_IN_RDY (1L<<8) +#define BNX2_MISC_SMB_IN_DONE (1L<<9) +#define BNX2_MISC_SMB_IN_FIRSTBYTE (1L<<10) +#define BNX2_MISC_SMB_IN_STATUS (0x7L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OK (0x0L<<11) +#define BNX2_MISC_SMB_IN_STATUS_PEC (0x1L<<11) +#define BNX2_MISC_SMB_IN_STATUS_OFLOW (0x2L<<11) +#define BNX2_MISC_SMB_IN_STATUS_STOP (0x3L<<11) +#define BNX2_MISC_SMB_IN_STATUS_TIMEOUT (0x4L<<11) + +#define BNX2_MISC_SMB_OUT 0x00000888 +#define BNX2_MISC_SMB_OUT_DAT_OUT (0xffL<<0) +#define BNX2_MISC_SMB_OUT_RDY (1L<<8) +#define BNX2_MISC_SMB_OUT_START (1L<<9) +#define BNX2_MISC_SMB_OUT_LAST (1L<<10) +#define BNX2_MISC_SMB_OUT_ACC_TYPE (1L<<11) +#define BNX2_MISC_SMB_OUT_ENB_PEC (1L<<12) +#define BNX2_MISC_SMB_OUT_GET_RX_LEN (1L<<13) +#define BNX2_MISC_SMB_OUT_SMB_READ_LEN (0x3fL<<14) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS (0xfL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_OK (0L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_NACK (1L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_NACK (9L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_UFLOW (2L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_STOP (3L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_TIMEOUT (4L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_FIRST_LOST (5L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_SUB_LOST (0xdL<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_STATUS_BADACK (0x6L<<20) +#define BNX2_MISC_SMB_OUT_SMB_OUT_SLAVEMODE (1L<<24) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_EN (1L<<25) +#define BNX2_MISC_SMB_OUT_SMB_OUT_DAT_IN (1L<<26) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_EN (1L<<27) +#define BNX2_MISC_SMB_OUT_SMB_OUT_CLK_IN (1L<<28) + +#define BNX2_MISC_SMB_WATCHDOG 0x0000088c +#define BNX2_MISC_SMB_WATCHDOG_WATCHDOG (0xffffL<<0) + +#define BNX2_MISC_SMB_HEARTBEAT 0x00000890 +#define BNX2_MISC_SMB_HEARTBEAT_HEARTBEAT (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_ASF 0x00000894 +#define BNX2_MISC_SMB_POLL_ASF_POLL_ASF (0xffffL<<0) + +#define BNX2_MISC_SMB_POLL_LEGACY 0x00000898 +#define BNX2_MISC_SMB_POLL_LEGACY_POLL_LEGACY (0xffffL<<0) + +#define BNX2_MISC_SMB_RETRAN 0x0000089c +#define BNX2_MISC_SMB_RETRAN_RETRAN (0xffL<<0) + +#define BNX2_MISC_SMB_TIMESTAMP 0x000008a0 +#define BNX2_MISC_SMB_TIMESTAMP_TIMESTAMP (0xffffffffL<<0) + +#define BNX2_MISC_PERR_ENA0 0x000008a4 +#define BNX2_MISC_PERR_ENA0_COM_MISC_CTXC (1L<<0) +#define BNX2_MISC_PERR_ENA0_COM_MISC_REGF (1L<<1) +#define BNX2_MISC_PERR_ENA0_COM_MISC_SCPAD (1L<<2) +#define BNX2_MISC_PERR_ENA0_CP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA0_CP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA0_CP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA0_CS_MISC_TMEM (1L<<6) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM0 (1L<<7) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM1 (1L<<8) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM2 (1L<<9) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM3 (1L<<10) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM4 (1L<<11) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_ACCM5 (1L<<12) +#define BNX2_MISC_PERR_ENA0_CTX_MISC_PGTBL (1L<<13) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR0 (1L<<14) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR1 (1L<<15) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR2 (1L<<16) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR3 (1L<<17) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DR4 (1L<<18) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW0 (1L<<19) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW1 (1L<<20) +#define BNX2_MISC_PERR_ENA0_DMAE_MISC_DW2 (1L<<21) +#define BNX2_MISC_PERR_ENA0_HC_MISC_DMA (1L<<22) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_REGF (1L<<23) +#define BNX2_MISC_PERR_ENA0_MCP_MISC_SCPAD (1L<<24) +#define BNX2_MISC_PERR_ENA0_MQ_MISC_CTX (1L<<25) +#define BNX2_MISC_PERR_ENA0_RBDC_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_MB (1L<<27) +#define BNX2_MISC_PERR_ENA0_RBUF_MISC_PTR (1L<<28) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPC (1L<<29) +#define BNX2_MISC_PERR_ENA0_RDE_MISC_RPM (1L<<30) +#define BNX2_MISC_PERR_ENA0_RV2P_MISC_CB0REGS (1L<<31) + +#define BNX2_MISC_PERR_ENA1 0x000008a8 +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_CB1REGS (1L<<0) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P1IRAM (1L<<1) +#define BNX2_MISC_PERR_ENA1_RV2P_MISC_P2IRAM (1L<<2) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_CTXC (1L<<3) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_REGF (1L<<4) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_SCPAD (1L<<5) +#define BNX2_MISC_PERR_ENA1_RXP_MISC_RBUFC (1L<<6) +#define BNX2_MISC_PERR_ENA1_TBDC_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA1_TDMA_MISC (1L<<8) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB0 (1L<<9) +#define BNX2_MISC_PERR_ENA1_THBUF_MISC_MB1 (1L<<10) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_REGF (1L<<11) +#define BNX2_MISC_PERR_ENA1_TPAT_MISC_SCPAD (1L<<12) +#define BNX2_MISC_PERR_ENA1_TPBUF_MISC_MB (1L<<13) +#define BNX2_MISC_PERR_ENA1_TSCH_MISC_LR (1L<<14) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_CTXC (1L<<15) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_REGF (1L<<16) +#define BNX2_MISC_PERR_ENA1_TXP_MISC_SCPAD (1L<<17) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIORX (1L<<18) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_FIOTX (1L<<19) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_RX (1L<<20) +#define BNX2_MISC_PERR_ENA1_UMP_MISC_TX (1L<<21) +#define BNX2_MISC_PERR_ENA1_RDMAQ_MISC (1L<<22) +#define BNX2_MISC_PERR_ENA1_CSQ_MISC (1L<<23) +#define BNX2_MISC_PERR_ENA1_CPQ_MISC (1L<<24) +#define BNX2_MISC_PERR_ENA1_MCPQ_MISC (1L<<25) +#define BNX2_MISC_PERR_ENA1_RV2PMQ_MISC (1L<<26) +#define BNX2_MISC_PERR_ENA1_RV2PPQ_MISC (1L<<27) +#define BNX2_MISC_PERR_ENA1_RV2PTQ_MISC (1L<<28) +#define BNX2_MISC_PERR_ENA1_RXPQ_MISC (1L<<29) +#define BNX2_MISC_PERR_ENA1_RXPCQ_MISC (1L<<30) +#define BNX2_MISC_PERR_ENA1_RLUPQ_MISC (1L<<31) + +#define BNX2_MISC_PERR_ENA2 0x000008ac +#define BNX2_MISC_PERR_ENA2_COMQ_MISC (1L<<0) +#define BNX2_MISC_PERR_ENA2_COMXQ_MISC (1L<<1) +#define BNX2_MISC_PERR_ENA2_COMTQ_MISC (1L<<2) +#define BNX2_MISC_PERR_ENA2_TSCHQ_MISC (1L<<3) +#define BNX2_MISC_PERR_ENA2_TBDRQ_MISC (1L<<4) +#define BNX2_MISC_PERR_ENA2_TXPQ_MISC (1L<<5) +#define BNX2_MISC_PERR_ENA2_TDMAQ_MISC (1L<<6) +#define BNX2_MISC_PERR_ENA2_TPATQ_MISC (1L<<7) +#define BNX2_MISC_PERR_ENA2_TASQ_MISC (1L<<8) + +#define BNX2_MISC_DEBUG_VECTOR_SEL 0x000008b0 +#define BNX2_MISC_DEBUG_VECTOR_SEL_0 (0xfffL<<0) +#define BNX2_MISC_DEBUG_VECTOR_SEL_1 (0xfffL<<12) + +#define BNX2_MISC_VREG_CONTROL 0x000008b4 +#define BNX2_MISC_VREG_CONTROL_1_2 (0xfL<<0) +#define BNX2_MISC_VREG_CONTROL_2_5 (0xfL<<4) + +#define BNX2_MISC_FINAL_CLK_CTL_VAL 0x000008b8 +#define BNX2_MISC_FINAL_CLK_CTL_VAL_MISC_FINAL_CLK_CTL_VAL (0x3ffffffL<<6) + +#define BNX2_MISC_UNUSED0 0x000008bc + + +/* + * nvm_reg definition + * offset: 0x6400 + */ +#define BNX2_NVM_COMMAND 0x00006400 +#define BNX2_NVM_COMMAND_RST (1L<<0) +#define BNX2_NVM_COMMAND_DONE (1L<<3) +#define BNX2_NVM_COMMAND_DOIT (1L<<4) +#define BNX2_NVM_COMMAND_WR (1L<<5) +#define BNX2_NVM_COMMAND_ERASE (1L<<6) +#define BNX2_NVM_COMMAND_FIRST (1L<<7) +#define BNX2_NVM_COMMAND_LAST (1L<<8) +#define BNX2_NVM_COMMAND_WREN (1L<<16) +#define BNX2_NVM_COMMAND_WRDI (1L<<17) +#define BNX2_NVM_COMMAND_EWSR (1L<<18) +#define BNX2_NVM_COMMAND_WRSR (1L<<19) + +#define BNX2_NVM_STATUS 0x00006404 +#define BNX2_NVM_STATUS_PI_FSM_STATE (0xfL<<0) +#define BNX2_NVM_STATUS_EE_FSM_STATE (0xfL<<4) +#define BNX2_NVM_STATUS_EQ_FSM_STATE (0xfL<<8) + +#define BNX2_NVM_WRITE 0x00006408 +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE (0xffffffffL<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EECLK (1L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SCLK (4L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_CS_B (8L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SO (16L<<0) +#define BNX2_NVM_WRITE_NVM_WRITE_VALUE_SI (32L<<0) + +#define BNX2_NVM_ADDR 0x0000640c +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE (0xffffffL<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EECLK (1L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SCLK (4L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_CS_B (8L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SO (16L<<0) +#define BNX2_NVM_ADDR_NVM_ADDR_VALUE_SI (32L<<0) + +#define BNX2_NVM_READ 0x00006410 +#define BNX2_NVM_READ_NVM_READ_VALUE (0xffffffffL<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_BIT_BANG (0L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EECLK (1L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_EEDATA (2L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SCLK (4L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_CS_B (8L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SO (16L<<0) +#define BNX2_NVM_READ_NVM_READ_VALUE_SI (32L<<0) + +#define BNX2_NVM_CFG1 0x00006414 +#define BNX2_NVM_CFG1_FLASH_MODE (1L<<0) +#define BNX2_NVM_CFG1_BUFFER_MODE (1L<<1) +#define BNX2_NVM_CFG1_PASS_MODE (1L<<2) +#define BNX2_NVM_CFG1_BITBANG_MODE (1L<<3) +#define BNX2_NVM_CFG1_STATUS_BIT (0x7L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_FLASH_RDY (0L<<4) +#define BNX2_NVM_CFG1_STATUS_BIT_BUFFER_RDY (7L<<4) +#define BNX2_NVM_CFG1_SPI_CLK_DIV (0xfL<<7) +#define BNX2_NVM_CFG1_SEE_CLK_DIV (0x7ffL<<11) +#define BNX2_NVM_CFG1_PROTECT_MODE (1L<<24) +#define BNX2_NVM_CFG1_FLASH_SIZE (1L<<25) +#define BNX2_NVM_CFG1_COMPAT_BYPASSS (1L<<31) + +#define BNX2_NVM_CFG2 0x00006418 +#define BNX2_NVM_CFG2_ERASE_CMD (0xffL<<0) +#define BNX2_NVM_CFG2_DUMMY (0xffL<<8) +#define BNX2_NVM_CFG2_STATUS_CMD (0xffL<<16) + +#define BNX2_NVM_CFG3 0x0000641c +#define BNX2_NVM_CFG3_BUFFER_RD_CMD (0xffL<<0) +#define BNX2_NVM_CFG3_WRITE_CMD (0xffL<<8) +#define BNX2_NVM_CFG3_BUFFER_WRITE_CMD (0xffL<<16) +#define BNX2_NVM_CFG3_READ_CMD (0xffL<<24) + +#define BNX2_NVM_SW_ARB 0x00006420 +#define BNX2_NVM_SW_ARB_ARB_REQ_SET0 (1L<<0) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET1 (1L<<1) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET2 (1L<<2) +#define BNX2_NVM_SW_ARB_ARB_REQ_SET3 (1L<<3) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR0 (1L<<4) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR1 (1L<<5) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR2 (1L<<6) +#define BNX2_NVM_SW_ARB_ARB_REQ_CLR3 (1L<<7) +#define BNX2_NVM_SW_ARB_ARB_ARB0 (1L<<8) +#define BNX2_NVM_SW_ARB_ARB_ARB1 (1L<<9) +#define BNX2_NVM_SW_ARB_ARB_ARB2 (1L<<10) +#define BNX2_NVM_SW_ARB_ARB_ARB3 (1L<<11) +#define BNX2_NVM_SW_ARB_REQ0 (1L<<12) +#define BNX2_NVM_SW_ARB_REQ1 (1L<<13) +#define BNX2_NVM_SW_ARB_REQ2 (1L<<14) +#define BNX2_NVM_SW_ARB_REQ3 (1L<<15) + +#define BNX2_NVM_ACCESS_ENABLE 0x00006424 +#define BNX2_NVM_ACCESS_ENABLE_EN (1L<<0) +#define BNX2_NVM_ACCESS_ENABLE_WR_EN (1L<<1) + +#define BNX2_NVM_WRITE1 0x00006428 +#define BNX2_NVM_WRITE1_WREN_CMD (0xffL<<0) +#define BNX2_NVM_WRITE1_WRDI_CMD (0xffL<<8) +#define BNX2_NVM_WRITE1_SR_DATA (0xffL<<16) + + + +/* + * dma_reg definition + * offset: 0xc00 + */ +#define BNX2_DMA_COMMAND 0x00000c00 +#define BNX2_DMA_COMMAND_ENABLE (1L<<0) + +#define BNX2_DMA_STATUS 0x00000c04 +#define BNX2_DMA_STATUS_PAR_ERROR_STATE (1L<<0) +#define BNX2_DMA_STATUS_READ_TRANSFERS_STAT (1L<<16) +#define BNX2_DMA_STATUS_READ_DELAY_PCI_CLKS_STAT (1L<<17) +#define BNX2_DMA_STATUS_BIG_READ_TRANSFERS_STAT (1L<<18) +#define BNX2_DMA_STATUS_BIG_READ_DELAY_PCI_CLKS_STAT (1L<<19) +#define BNX2_DMA_STATUS_BIG_READ_RETRY_AFTER_DATA_STAT (1L<<20) +#define BNX2_DMA_STATUS_WRITE_TRANSFERS_STAT (1L<<21) +#define BNX2_DMA_STATUS_WRITE_DELAY_PCI_CLKS_STAT (1L<<22) +#define BNX2_DMA_STATUS_BIG_WRITE_TRANSFERS_STAT (1L<<23) +#define BNX2_DMA_STATUS_BIG_WRITE_DELAY_PCI_CLKS_STAT (1L<<24) +#define BNX2_DMA_STATUS_BIG_WRITE_RETRY_AFTER_DATA_STAT (1L<<25) + +#define BNX2_DMA_CONFIG 0x00000c08 +#define BNX2_DMA_CONFIG_DATA_BYTE_SWAP (1L<<0) +#define BNX2_DMA_CONFIG_DATA_WORD_SWAP (1L<<1) +#define BNX2_DMA_CONFIG_CNTL_BYTE_SWAP (1L<<4) +#define BNX2_DMA_CONFIG_CNTL_WORD_SWAP (1L<<5) +#define BNX2_DMA_CONFIG_ONE_DMA (1L<<6) +#define BNX2_DMA_CONFIG_CNTL_TWO_DMA (1L<<7) +#define BNX2_DMA_CONFIG_CNTL_FPGA_MODE (1L<<8) +#define BNX2_DMA_CONFIG_CNTL_PING_PONG_DMA (1L<<10) +#define BNX2_DMA_CONFIG_CNTL_PCI_COMP_DLY (1L<<11) +#define BNX2_DMA_CONFIG_NO_RCHANS_IN_USE (0xfL<<12) +#define BNX2_DMA_CONFIG_NO_WCHANS_IN_USE (0xfL<<16) +#define BNX2_DMA_CONFIG_PCI_CLK_CMP_BITS (0x7L<<20) +#define BNX2_DMA_CONFIG_PCI_FAST_CLK_CMP (1L<<23) +#define BNX2_DMA_CONFIG_BIG_SIZE (0xfL<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_NONE (0x0L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_64 (0x1L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_128 (0x2L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_256 (0x4L<<24) +#define BNX2_DMA_CONFIG_BIG_SIZE_512 (0x8L<<24) + +#define BNX2_DMA_BLACKOUT 0x00000c0c +#define BNX2_DMA_BLACKOUT_RD_RETRY_BLACKOUT (0xffL<<0) +#define BNX2_DMA_BLACKOUT_2ND_RD_RETRY_BLACKOUT (0xffL<<8) +#define BNX2_DMA_BLACKOUT_WR_RETRY_BLACKOUT (0xffL<<16) + +#define BNX2_DMA_RCHAN_STAT 0x00000c30 +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_RCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_RCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_WCHAN_STAT 0x00000c34 +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_0 (0x7L<<0) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_0 (1L<<3) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_1 (0x7L<<4) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_1 (1L<<7) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_2 (0x7L<<8) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_2 (1L<<11) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_3 (0x7L<<12) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_3 (1L<<15) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_4 (0x7L<<16) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_4 (1L<<19) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_5 (0x7L<<20) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_5 (1L<<23) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_6 (0x7L<<24) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_6 (1L<<27) +#define BNX2_DMA_WCHAN_STAT_COMP_CODE_7 (0x7L<<28) +#define BNX2_DMA_WCHAN_STAT_PAR_ERR_7 (1L<<31) + +#define BNX2_DMA_RCHAN_ASSIGNMENT 0x00000c38 +#define BNX2_DMA_RCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_RCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_RCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_RCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_RCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_RCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_RCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_RCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_WCHAN_ASSIGNMENT 0x00000c3c +#define BNX2_DMA_WCHAN_ASSIGNMENT_0 (0xfL<<0) +#define BNX2_DMA_WCHAN_ASSIGNMENT_1 (0xfL<<4) +#define BNX2_DMA_WCHAN_ASSIGNMENT_2 (0xfL<<8) +#define BNX2_DMA_WCHAN_ASSIGNMENT_3 (0xfL<<12) +#define BNX2_DMA_WCHAN_ASSIGNMENT_4 (0xfL<<16) +#define BNX2_DMA_WCHAN_ASSIGNMENT_5 (0xfL<<20) +#define BNX2_DMA_WCHAN_ASSIGNMENT_6 (0xfL<<24) +#define BNX2_DMA_WCHAN_ASSIGNMENT_7 (0xfL<<28) + +#define BNX2_DMA_RCHAN_STAT_00 0x00000c40 +#define BNX2_DMA_RCHAN_STAT_00_RCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_01 0x00000c44 +#define BNX2_DMA_RCHAN_STAT_01_RCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_RCHAN_STAT_02 0x00000c48 +#define BNX2_DMA_RCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_RCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_RCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_RCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_RCHAN_STAT_10 0x00000c4c +#define BNX2_DMA_RCHAN_STAT_11 0x00000c50 +#define BNX2_DMA_RCHAN_STAT_12 0x00000c54 +#define BNX2_DMA_RCHAN_STAT_20 0x00000c58 +#define BNX2_DMA_RCHAN_STAT_21 0x00000c5c +#define BNX2_DMA_RCHAN_STAT_22 0x00000c60 +#define BNX2_DMA_RCHAN_STAT_30 0x00000c64 +#define BNX2_DMA_RCHAN_STAT_31 0x00000c68 +#define BNX2_DMA_RCHAN_STAT_32 0x00000c6c +#define BNX2_DMA_RCHAN_STAT_40 0x00000c70 +#define BNX2_DMA_RCHAN_STAT_41 0x00000c74 +#define BNX2_DMA_RCHAN_STAT_42 0x00000c78 +#define BNX2_DMA_RCHAN_STAT_50 0x00000c7c +#define BNX2_DMA_RCHAN_STAT_51 0x00000c80 +#define BNX2_DMA_RCHAN_STAT_52 0x00000c84 +#define BNX2_DMA_RCHAN_STAT_60 0x00000c88 +#define BNX2_DMA_RCHAN_STAT_61 0x00000c8c +#define BNX2_DMA_RCHAN_STAT_62 0x00000c90 +#define BNX2_DMA_RCHAN_STAT_70 0x00000c94 +#define BNX2_DMA_RCHAN_STAT_71 0x00000c98 +#define BNX2_DMA_RCHAN_STAT_72 0x00000c9c +#define BNX2_DMA_WCHAN_STAT_00 0x00000ca0 +#define BNX2_DMA_WCHAN_STAT_00_WCHAN_STA_HOST_ADDR_LOW (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_01 0x00000ca4 +#define BNX2_DMA_WCHAN_STAT_01_WCHAN_STA_HOST_ADDR_HIGH (0xffffffffL<<0) + +#define BNX2_DMA_WCHAN_STAT_02 0x00000ca8 +#define BNX2_DMA_WCHAN_STAT_02_LENGTH (0xffffL<<0) +#define BNX2_DMA_WCHAN_STAT_02_WORD_SWAP (1L<<16) +#define BNX2_DMA_WCHAN_STAT_02_BYTE_SWAP (1L<<17) +#define BNX2_DMA_WCHAN_STAT_02_PRIORITY_LVL (1L<<18) + +#define BNX2_DMA_WCHAN_STAT_10 0x00000cac +#define BNX2_DMA_WCHAN_STAT_11 0x00000cb0 +#define BNX2_DMA_WCHAN_STAT_12 0x00000cb4 +#define BNX2_DMA_WCHAN_STAT_20 0x00000cb8 +#define BNX2_DMA_WCHAN_STAT_21 0x00000cbc +#define BNX2_DMA_WCHAN_STAT_22 0x00000cc0 +#define BNX2_DMA_WCHAN_STAT_30 0x00000cc4 +#define BNX2_DMA_WCHAN_STAT_31 0x00000cc8 +#define BNX2_DMA_WCHAN_STAT_32 0x00000ccc +#define BNX2_DMA_WCHAN_STAT_40 0x00000cd0 +#define BNX2_DMA_WCHAN_STAT_41 0x00000cd4 +#define BNX2_DMA_WCHAN_STAT_42 0x00000cd8 +#define BNX2_DMA_WCHAN_STAT_50 0x00000cdc +#define BNX2_DMA_WCHAN_STAT_51 0x00000ce0 +#define BNX2_DMA_WCHAN_STAT_52 0x00000ce4 +#define BNX2_DMA_WCHAN_STAT_60 0x00000ce8 +#define BNX2_DMA_WCHAN_STAT_61 0x00000cec +#define BNX2_DMA_WCHAN_STAT_62 0x00000cf0 +#define BNX2_DMA_WCHAN_STAT_70 0x00000cf4 +#define BNX2_DMA_WCHAN_STAT_71 0x00000cf8 +#define BNX2_DMA_WCHAN_STAT_72 0x00000cfc +#define BNX2_DMA_ARB_STAT_00 0x00000d00 +#define BNX2_DMA_ARB_STAT_00_MASTER (0xffffL<<0) +#define BNX2_DMA_ARB_STAT_00_MASTER_ENC (0xffL<<16) +#define BNX2_DMA_ARB_STAT_00_CUR_BINMSTR (0xffL<<24) + +#define BNX2_DMA_ARB_STAT_01 0x00000d04 +#define BNX2_DMA_ARB_STAT_01_LPR_RPTR (0xfL<<0) +#define BNX2_DMA_ARB_STAT_01_LPR_WPTR (0xfL<<4) +#define BNX2_DMA_ARB_STAT_01_LPB_RPTR (0xfL<<8) +#define BNX2_DMA_ARB_STAT_01_LPB_WPTR (0xfL<<12) +#define BNX2_DMA_ARB_STAT_01_HPR_RPTR (0xfL<<16) +#define BNX2_DMA_ARB_STAT_01_HPR_WPTR (0xfL<<20) +#define BNX2_DMA_ARB_STAT_01_HPB_RPTR (0xfL<<24) +#define BNX2_DMA_ARB_STAT_01_HPB_WPTR (0xfL<<28) + +#define BNX2_DMA_FUSE_CTRL0_CMD 0x00000f00 +#define BNX2_DMA_FUSE_CTRL0_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL0_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL0_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL0_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL0_DATA 0x00000f04 +#define BNX2_DMA_FUSE_CTRL1_CMD 0x00000f08 +#define BNX2_DMA_FUSE_CTRL1_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL1_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL1_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL1_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL1_DATA 0x00000f0c +#define BNX2_DMA_FUSE_CTRL2_CMD 0x00000f10 +#define BNX2_DMA_FUSE_CTRL2_CMD_PWRUP_DONE (1L<<0) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT_DONE (1L<<1) +#define BNX2_DMA_FUSE_CTRL2_CMD_SHIFT (1L<<2) +#define BNX2_DMA_FUSE_CTRL2_CMD_LOAD (1L<<3) +#define BNX2_DMA_FUSE_CTRL2_CMD_SEL (0xfL<<8) + +#define BNX2_DMA_FUSE_CTRL2_DATA 0x00000f14 + + +/* + * context_reg definition + * offset: 0x1000 + */ +#define BNX2_CTX_COMMAND 0x00001000 +#define BNX2_CTX_COMMAND_ENABLED (1L<<0) + +#define BNX2_CTX_STATUS 0x00001004 +#define BNX2_CTX_STATUS_LOCK_WAIT (1L<<0) +#define BNX2_CTX_STATUS_READ_STAT (1L<<16) +#define BNX2_CTX_STATUS_WRITE_STAT (1L<<17) +#define BNX2_CTX_STATUS_ACC_STALL_STAT (1L<<18) +#define BNX2_CTX_STATUS_LOCK_STALL_STAT (1L<<19) + +#define BNX2_CTX_VIRT_ADDR 0x00001008 +#define BNX2_CTX_VIRT_ADDR_VIRT_ADDR (0x7fffL<<6) + +#define BNX2_CTX_PAGE_TBL 0x0000100c +#define BNX2_CTX_PAGE_TBL_PAGE_TBL (0x3fffL<<6) + +#define BNX2_CTX_DATA_ADR 0x00001010 +#define BNX2_CTX_DATA_ADR_DATA_ADR (0x7ffffL<<2) + +#define BNX2_CTX_DATA 0x00001014 +#define BNX2_CTX_LOCK 0x00001018 +#define BNX2_CTX_LOCK_TYPE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_VOID (0x0L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_COMPLETE (0x7L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_PROTOCOL (0x1L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TX (0x2L<<0) +#define BNX2_CTX_LOCK_TYPE_LOCK_TYPE_TIMER (0x4L<<0) +#define BNX2_CTX_LOCK_CID_VALUE (0x3fffL<<7) +#define BNX2_CTX_LOCK_GRANTED (1L<<26) +#define BNX2_CTX_LOCK_MODE (0x7L<<27) +#define BNX2_CTX_LOCK_MODE_UNLOCK (0x0L<<27) +#define BNX2_CTX_LOCK_MODE_IMMEDIATE (0x1L<<27) +#define BNX2_CTX_LOCK_MODE_SURE (0x2L<<27) +#define BNX2_CTX_LOCK_STATUS (1L<<30) +#define BNX2_CTX_LOCK_REQ (1L<<31) + +#define BNX2_CTX_ACCESS_STATUS 0x00001040 +#define BNX2_CTX_ACCESS_STATUS_MASTERENCODED (0xfL<<0) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYSM (0x3L<<10) +#define BNX2_CTX_ACCESS_STATUS_PAGETABLEINITSM (0x3L<<12) +#define BNX2_CTX_ACCESS_STATUS_ACCESSMEMORYINITSM (0x3L<<14) +#define BNX2_CTX_ACCESS_STATUS_QUALIFIED_REQUEST (0x7ffL<<17) + +#define BNX2_CTX_DBG_LOCK_STATUS 0x00001044 +#define BNX2_CTX_DBG_LOCK_STATUS_SM (0x3ffL<<0) +#define BNX2_CTX_DBG_LOCK_STATUS_MATCH (0x3ffL<<22) + +#define BNX2_CTX_CHNL_LOCK_STATUS_0 0x00001080 +#define BNX2_CTX_CHNL_LOCK_STATUS_0_CID (0x3fffL<<0) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_TYPE (0x3L<<14) +#define BNX2_CTX_CHNL_LOCK_STATUS_0_MODE (1L<<16) + +#define BNX2_CTX_CHNL_LOCK_STATUS_1 0x00001084 +#define BNX2_CTX_CHNL_LOCK_STATUS_2 0x00001088 +#define BNX2_CTX_CHNL_LOCK_STATUS_3 0x0000108c +#define BNX2_CTX_CHNL_LOCK_STATUS_4 0x00001090 +#define BNX2_CTX_CHNL_LOCK_STATUS_5 0x00001094 +#define BNX2_CTX_CHNL_LOCK_STATUS_6 0x00001098 +#define BNX2_CTX_CHNL_LOCK_STATUS_7 0x0000109c +#define BNX2_CTX_CHNL_LOCK_STATUS_8 0x000010a0 + + +/* + * emac_reg definition + * offset: 0x1400 + */ +#define BNX2_EMAC_MODE 0x00001400 +#define BNX2_EMAC_MODE_RESET (1L<<0) +#define BNX2_EMAC_MODE_HALF_DUPLEX (1L<<1) +#define BNX2_EMAC_MODE_PORT (0x3L<<2) +#define BNX2_EMAC_MODE_PORT_NONE (0L<<2) +#define BNX2_EMAC_MODE_PORT_MII (1L<<2) +#define BNX2_EMAC_MODE_PORT_GMII (2L<<2) +#define BNX2_EMAC_MODE_PORT_UNDEF (3L<<2) +#define BNX2_EMAC_MODE_MAC_LOOP (1L<<4) +#define BNX2_EMAC_MODE_TAGGED_MAC_CTL (1L<<7) +#define BNX2_EMAC_MODE_TX_BURST (1L<<8) +#define BNX2_EMAC_MODE_MAX_DEFER_DROP_ENA (1L<<9) +#define BNX2_EMAC_MODE_EXT_LINK_POL (1L<<10) +#define BNX2_EMAC_MODE_FORCE_LINK (1L<<11) +#define BNX2_EMAC_MODE_MPKT (1L<<18) +#define BNX2_EMAC_MODE_MPKT_RCVD (1L<<19) +#define BNX2_EMAC_MODE_ACPI_RCVD (1L<<20) + +#define BNX2_EMAC_STATUS 0x00001404 +#define BNX2_EMAC_STATUS_LINK (1L<<11) +#define BNX2_EMAC_STATUS_LINK_CHANGE (1L<<12) +#define BNX2_EMAC_STATUS_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_STATUS_MI_INT (1L<<23) +#define BNX2_EMAC_STATUS_AP_ERROR (1L<<24) +#define BNX2_EMAC_STATUS_PARITY_ERROR_STATE (1L<<31) + +#define BNX2_EMAC_ATTENTION_ENA 0x00001408 +#define BNX2_EMAC_ATTENTION_ENA_LINK (1L<<11) +#define BNX2_EMAC_ATTENTION_ENA_MI_COMPLETE (1L<<22) +#define BNX2_EMAC_ATTENTION_ENA_MI_INT (1L<<23) +#define BNX2_EMAC_ATTENTION_ENA_AP_ERROR (1L<<24) + +#define BNX2_EMAC_LED 0x0000140c +#define BNX2_EMAC_LED_OVERRIDE (1L<<0) +#define BNX2_EMAC_LED_1000MB_OVERRIDE (1L<<1) +#define BNX2_EMAC_LED_100MB_OVERRIDE (1L<<2) +#define BNX2_EMAC_LED_10MB_OVERRIDE (1L<<3) +#define BNX2_EMAC_LED_TRAFFIC_OVERRIDE (1L<<4) +#define BNX2_EMAC_LED_BLNK_TRAFFIC (1L<<5) +#define BNX2_EMAC_LED_TRAFFIC (1L<<6) +#define BNX2_EMAC_LED_1000MB (1L<<7) +#define BNX2_EMAC_LED_100MB (1L<<8) +#define BNX2_EMAC_LED_10MB (1L<<9) +#define BNX2_EMAC_LED_TRAFFIC_STAT (1L<<10) +#define BNX2_EMAC_LED_BLNK_RATE (0xfffL<<19) +#define BNX2_EMAC_LED_BLNK_RATE_ENA (1L<<31) + +#define BNX2_EMAC_MAC_MATCH0 0x00001410 +#define BNX2_EMAC_MAC_MATCH1 0x00001414 +#define BNX2_EMAC_MAC_MATCH2 0x00001418 +#define BNX2_EMAC_MAC_MATCH3 0x0000141c +#define BNX2_EMAC_MAC_MATCH4 0x00001420 +#define BNX2_EMAC_MAC_MATCH5 0x00001424 +#define BNX2_EMAC_MAC_MATCH6 0x00001428 +#define BNX2_EMAC_MAC_MATCH7 0x0000142c +#define BNX2_EMAC_MAC_MATCH8 0x00001430 +#define BNX2_EMAC_MAC_MATCH9 0x00001434 +#define BNX2_EMAC_MAC_MATCH10 0x00001438 +#define BNX2_EMAC_MAC_MATCH11 0x0000143c +#define BNX2_EMAC_MAC_MATCH12 0x00001440 +#define BNX2_EMAC_MAC_MATCH13 0x00001444 +#define BNX2_EMAC_MAC_MATCH14 0x00001448 +#define BNX2_EMAC_MAC_MATCH15 0x0000144c +#define BNX2_EMAC_MAC_MATCH16 0x00001450 +#define BNX2_EMAC_MAC_MATCH17 0x00001454 +#define BNX2_EMAC_MAC_MATCH18 0x00001458 +#define BNX2_EMAC_MAC_MATCH19 0x0000145c +#define BNX2_EMAC_MAC_MATCH20 0x00001460 +#define BNX2_EMAC_MAC_MATCH21 0x00001464 +#define BNX2_EMAC_MAC_MATCH22 0x00001468 +#define BNX2_EMAC_MAC_MATCH23 0x0000146c +#define BNX2_EMAC_MAC_MATCH24 0x00001470 +#define BNX2_EMAC_MAC_MATCH25 0x00001474 +#define BNX2_EMAC_MAC_MATCH26 0x00001478 +#define BNX2_EMAC_MAC_MATCH27 0x0000147c +#define BNX2_EMAC_MAC_MATCH28 0x00001480 +#define BNX2_EMAC_MAC_MATCH29 0x00001484 +#define BNX2_EMAC_MAC_MATCH30 0x00001488 +#define BNX2_EMAC_MAC_MATCH31 0x0000148c +#define BNX2_EMAC_BACKOFF_SEED 0x00001498 +#define BNX2_EMAC_BACKOFF_SEED_EMAC_BACKOFF_SEED (0x3ffL<<0) + +#define BNX2_EMAC_RX_MTU_SIZE 0x0000149c +#define BNX2_EMAC_RX_MTU_SIZE_MTU_SIZE (0xffffL<<0) +#define BNX2_EMAC_RX_MTU_SIZE_JUMBO_ENA (1L<<31) + +#define BNX2_EMAC_SERDES_CNTL 0x000014a4 +#define BNX2_EMAC_SERDES_CNTL_RXR (0x7L<<0) +#define BNX2_EMAC_SERDES_CNTL_RXG (0x3L<<3) +#define BNX2_EMAC_SERDES_CNTL_RXCKSEL (1L<<6) +#define BNX2_EMAC_SERDES_CNTL_TXBIAS (0x7L<<7) +#define BNX2_EMAC_SERDES_CNTL_BGMAX (1L<<10) +#define BNX2_EMAC_SERDES_CNTL_BGMIN (1L<<11) +#define BNX2_EMAC_SERDES_CNTL_TXMODE (1L<<12) +#define BNX2_EMAC_SERDES_CNTL_TXEDGE (1L<<13) +#define BNX2_EMAC_SERDES_CNTL_SERDES_MODE (1L<<14) +#define BNX2_EMAC_SERDES_CNTL_PLLTEST (1L<<15) +#define BNX2_EMAC_SERDES_CNTL_CDET_EN (1L<<16) +#define BNX2_EMAC_SERDES_CNTL_TBI_LBK (1L<<17) +#define BNX2_EMAC_SERDES_CNTL_REMOTE_LBK (1L<<18) +#define BNX2_EMAC_SERDES_CNTL_REV_PHASE (1L<<19) +#define BNX2_EMAC_SERDES_CNTL_REGCTL12 (0x3L<<20) +#define BNX2_EMAC_SERDES_CNTL_REGCTL25 (0x3L<<22) + +#define BNX2_EMAC_SERDES_STATUS 0x000014a8 +#define BNX2_EMAC_SERDES_STATUS_RX_STAT (0xffL<<0) +#define BNX2_EMAC_SERDES_STATUS_COMMA_DET (1L<<8) + +#define BNX2_EMAC_MDIO_COMM 0x000014ac +#define BNX2_EMAC_MDIO_COMM_DATA (0xffffL<<0) +#define BNX2_EMAC_MDIO_COMM_REG_ADDR (0x1fL<<16) +#define BNX2_EMAC_MDIO_COMM_PHY_ADDR (0x1fL<<21) +#define BNX2_EMAC_MDIO_COMM_COMMAND (0x3L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_0 (0L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_WRITE (1L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_READ (2L<<26) +#define BNX2_EMAC_MDIO_COMM_COMMAND_UNDEFINED_3 (3L<<26) +#define BNX2_EMAC_MDIO_COMM_FAIL (1L<<28) +#define BNX2_EMAC_MDIO_COMM_START_BUSY (1L<<29) +#define BNX2_EMAC_MDIO_COMM_DISEXT (1L<<30) + +#define BNX2_EMAC_MDIO_STATUS 0x000014b0 +#define BNX2_EMAC_MDIO_STATUS_LINK (1L<<0) +#define BNX2_EMAC_MDIO_STATUS_10MB (1L<<1) + +#define BNX2_EMAC_MDIO_MODE 0x000014b4 +#define BNX2_EMAC_MDIO_MODE_SHORT_PREAMBLE (1L<<1) +#define BNX2_EMAC_MDIO_MODE_AUTO_POLL (1L<<4) +#define BNX2_EMAC_MDIO_MODE_BIT_BANG (1L<<8) +#define BNX2_EMAC_MDIO_MODE_MDIO (1L<<9) +#define BNX2_EMAC_MDIO_MODE_MDIO_OE (1L<<10) +#define BNX2_EMAC_MDIO_MODE_MDC (1L<<11) +#define BNX2_EMAC_MDIO_MODE_MDINT (1L<<12) +#define BNX2_EMAC_MDIO_MODE_CLOCK_CNT (0x1fL<<16) + +#define BNX2_EMAC_MDIO_AUTO_STATUS 0x000014b8 +#define BNX2_EMAC_MDIO_AUTO_STATUS_AUTO_ERR (1L<<0) + +#define BNX2_EMAC_TX_MODE 0x000014bc +#define BNX2_EMAC_TX_MODE_RESET (1L<<0) +#define BNX2_EMAC_TX_MODE_EXT_PAUSE_EN (1L<<3) +#define BNX2_EMAC_TX_MODE_FLOW_EN (1L<<4) +#define BNX2_EMAC_TX_MODE_BIG_BACKOFF (1L<<5) +#define BNX2_EMAC_TX_MODE_LONG_PAUSE (1L<<6) +#define BNX2_EMAC_TX_MODE_LINK_AWARE (1L<<7) + +#define BNX2_EMAC_TX_STATUS 0x000014c0 +#define BNX2_EMAC_TX_STATUS_XOFFED (1L<<0) +#define BNX2_EMAC_TX_STATUS_XOFF_SENT (1L<<1) +#define BNX2_EMAC_TX_STATUS_XON_SENT (1L<<2) +#define BNX2_EMAC_TX_STATUS_LINK_UP (1L<<3) +#define BNX2_EMAC_TX_STATUS_UNDERRUN (1L<<4) + +#define BNX2_EMAC_TX_LENGTHS 0x000014c4 +#define BNX2_EMAC_TX_LENGTHS_SLOT (0xffL<<0) +#define BNX2_EMAC_TX_LENGTHS_IPG (0xfL<<8) +#define BNX2_EMAC_TX_LENGTHS_IPG_CRS (0x3L<<12) + +#define BNX2_EMAC_RX_MODE 0x000014c8 +#define BNX2_EMAC_RX_MODE_RESET (1L<<0) +#define BNX2_EMAC_RX_MODE_FLOW_EN (1L<<2) +#define BNX2_EMAC_RX_MODE_KEEP_MAC_CONTROL (1L<<3) +#define BNX2_EMAC_RX_MODE_KEEP_PAUSE (1L<<4) +#define BNX2_EMAC_RX_MODE_ACCEPT_OVERSIZE (1L<<5) +#define BNX2_EMAC_RX_MODE_ACCEPT_RUNTS (1L<<6) +#define BNX2_EMAC_RX_MODE_LLC_CHK (1L<<7) +#define BNX2_EMAC_RX_MODE_PROMISCUOUS (1L<<8) +#define BNX2_EMAC_RX_MODE_NO_CRC_CHK (1L<<9) +#define BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG (1L<<10) +#define BNX2_EMAC_RX_MODE_FILT_BROADCAST (1L<<11) +#define BNX2_EMAC_RX_MODE_SORT_MODE (1L<<12) + +#define BNX2_EMAC_RX_STATUS 0x000014cc +#define BNX2_EMAC_RX_STATUS_FFED (1L<<0) +#define BNX2_EMAC_RX_STATUS_FF_RECEIVED (1L<<1) +#define BNX2_EMAC_RX_STATUS_N_RECEIVED (1L<<2) + +#define BNX2_EMAC_MULTICAST_HASH0 0x000014d0 +#define BNX2_EMAC_MULTICAST_HASH1 0x000014d4 +#define BNX2_EMAC_MULTICAST_HASH2 0x000014d8 +#define BNX2_EMAC_MULTICAST_HASH3 0x000014dc +#define BNX2_EMAC_MULTICAST_HASH4 0x000014e0 +#define BNX2_EMAC_MULTICAST_HASH5 0x000014e4 +#define BNX2_EMAC_MULTICAST_HASH6 0x000014e8 +#define BNX2_EMAC_MULTICAST_HASH7 0x000014ec +#define BNX2_EMAC_RX_STAT_IFHCINOCTETS 0x00001500 +#define BNX2_EMAC_RX_STAT_IFHCINBADOCTETS 0x00001504 +#define BNX2_EMAC_RX_STAT_ETHERSTATSFRAGMENTS 0x00001508 +#define BNX2_EMAC_RX_STAT_IFHCINUCASTPKTS 0x0000150c +#define BNX2_EMAC_RX_STAT_IFHCINMULTICASTPKTS 0x00001510 +#define BNX2_EMAC_RX_STAT_IFHCINBROADCASTPKTS 0x00001514 +#define BNX2_EMAC_RX_STAT_DOT3STATSFCSERRORS 0x00001518 +#define BNX2_EMAC_RX_STAT_DOT3STATSALIGNMENTERRORS 0x0000151c +#define BNX2_EMAC_RX_STAT_DOT3STATSCARRIERSENSEERRORS 0x00001520 +#define BNX2_EMAC_RX_STAT_XONPAUSEFRAMESRECEIVED 0x00001524 +#define BNX2_EMAC_RX_STAT_XOFFPAUSEFRAMESRECEIVED 0x00001528 +#define BNX2_EMAC_RX_STAT_MACCONTROLFRAMESRECEIVED 0x0000152c +#define BNX2_EMAC_RX_STAT_XOFFSTATEENTERED 0x00001530 +#define BNX2_EMAC_RX_STAT_DOT3STATSFRAMESTOOLONG 0x00001534 +#define BNX2_EMAC_RX_STAT_ETHERSTATSJABBERS 0x00001538 +#define BNX2_EMAC_RX_STAT_ETHERSTATSUNDERSIZEPKTS 0x0000153c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS64OCTETS 0x00001540 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x00001544 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001548 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x0000154c +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001550 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x00001554 +#define BNX2_EMAC_RX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001558 +#define BNX2_EMAC_RXMAC_DEBUG0 0x0000155c +#define BNX2_EMAC_RXMAC_DEBUG1 0x00001560 +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_NE_BYTE_COUNT (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG1_LENGTH_OUT_RANGE (1L<<1) +#define BNX2_EMAC_RXMAC_DEBUG1_BAD_CRC (1L<<2) +#define BNX2_EMAC_RXMAC_DEBUG1_RX_ERROR (1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG1_ALIGN_ERROR (1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG1_LAST_DATA (1L<<5) +#define BNX2_EMAC_RXMAC_DEBUG1_ODD_BYTE_START (1L<<6) +#define BNX2_EMAC_RXMAC_DEBUG1_BYTE_COUNT (0xffffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG1_SLOT_TIME (0xffL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG2 0x00001564 +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SFD (0x1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DATA (0x2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SKEEP (0x3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_EXT (0x4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_DROP (0x5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_SDROP (0x6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_SM_STATE_FC (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE (0xfL<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_IDLE (0x0L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA0 (0x1L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA1 (0x2L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA2 (0x3L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_DATA3 (0x4L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_ABORT (0x5L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_WAIT (0x6L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_STATUS (0x7L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_IDI_STATE_LAST (0x8L<<3) +#define BNX2_EMAC_RXMAC_DEBUG2_BYTE_IN (0xffL<<7) +#define BNX2_EMAC_RXMAC_DEBUG2_FALSEC (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG2_TAGGED (1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_IDLE (0L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_PAUSE_STATE_PAUSED (1L<<18) +#define BNX2_EMAC_RXMAC_DEBUG2_SE_COUNTER (0xfL<<19) +#define BNX2_EMAC_RXMAC_DEBUG2_QUANTA (0x1fL<<23) + +#define BNX2_EMAC_RXMAC_DEBUG3 0x00001568 +#define BNX2_EMAC_RXMAC_DEBUG3_PAUSE_CTR (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG3_TMP_PAUSE_CTR (0xffffL<<16) + +#define BNX2_EMAC_RXMAC_DEBUG4 0x0000156c +#define BNX2_EMAC_RXMAC_DEBUG4_TYPE_FIELD (0xffffL<<0) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE (0x3fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC2 (0x1L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UMAC3 (0x2L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UNI (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MMAC3 (0x5L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA1 (0x6L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA2 (0x7L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PSA3 (0x8L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC2 (0x9L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC3 (0xaL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT1 (0xeL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MWAIT2 (0xfL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MCHECK (0x10L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MC (0x11L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC2 (0x12L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC3 (0x13L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA1 (0x14L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA2 (0x15L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BSA3 (0x16L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BTYPE (0x17L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_BC (0x18L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PTYPE (0x19L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_CMD (0x1aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MAC (0x1bL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_LATCH (0x1cL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XOFF (0x1dL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_XON (0x1eL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_PAUSED (0x1fL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_NPAUSED (0x20L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TTYPE (0x21L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_TVAL (0x22L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA1 (0x23L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA2 (0x24L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_USA3 (0x25L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTYPE (0x26L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTTYPE (0x27L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_UTVAL (0x28L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_MTYPE (0x29L<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_FILT_STATE_DROP (0x2aL<<16) +#define BNX2_EMAC_RXMAC_DEBUG4_DROP_PKT (1L<<22) +#define BNX2_EMAC_RXMAC_DEBUG4_SLOT_FILLED (1L<<23) +#define BNX2_EMAC_RXMAC_DEBUG4_FALSE_CARRIER (1L<<24) +#define BNX2_EMAC_RXMAC_DEBUG4_LAST_DATA (1L<<25) +#define BNX2_EMAC_RXMAC_DEBUG4_sfd_FOUND (1L<<26) +#define BNX2_EMAC_RXMAC_DEBUG4_ADVANCE (1L<<27) +#define BNX2_EMAC_RXMAC_DEBUG4_START (1L<<28) + +#define BNX2_EMAC_RXMAC_DEBUG5 0x00001570 +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM (0x7L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_IDLE (0L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_EOF (1L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_WAIT_STAT (2L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4FCRC (3L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4RDE (4L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_SET_EOF4ALL (5L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_PS_IDISM_1WD_WAIT_STAT (6L<<0) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1 (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_VDW (0x0L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_STAT (0x1L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_AEOF (0x2L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_NEOF (0x3L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SOF (0x4L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SAEOF (0x6L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF1_SNEOF (0x7L<<4) +#define BNX2_EMAC_RXMAC_DEBUG5_EOF_DETECTED (1L<<7) +#define BNX2_EMAC_RXMAC_DEBUG5_CCODE_BUF0 (0x7L<<8) +#define BNX2_EMAC_RXMAC_DEBUG5_RPM_IDI_FIFO_FULL (1L<<11) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_CCODE (1L<<12) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_DATA (1L<<13) +#define BNX2_EMAC_RXMAC_DEBUG5_LOAD_STAT (1L<<14) +#define BNX2_EMAC_RXMAC_DEBUG5_CLR_STAT (1L<<15) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_CCODE (0x3L<<16) +#define BNX2_EMAC_RXMAC_DEBUG5_IDI_RPM_ACCEPT (1L<<19) +#define BNX2_EMAC_RXMAC_DEBUG5_FMLEN (0xfffL<<20) + +#define BNX2_EMAC_RX_STAT_AC0 0x00001580 +#define BNX2_EMAC_RX_STAT_AC1 0x00001584 +#define BNX2_EMAC_RX_STAT_AC2 0x00001588 +#define BNX2_EMAC_RX_STAT_AC3 0x0000158c +#define BNX2_EMAC_RX_STAT_AC4 0x00001590 +#define BNX2_EMAC_RX_STAT_AC5 0x00001594 +#define BNX2_EMAC_RX_STAT_AC6 0x00001598 +#define BNX2_EMAC_RX_STAT_AC7 0x0000159c +#define BNX2_EMAC_RX_STAT_AC8 0x000015a0 +#define BNX2_EMAC_RX_STAT_AC9 0x000015a4 +#define BNX2_EMAC_RX_STAT_AC10 0x000015a8 +#define BNX2_EMAC_RX_STAT_AC11 0x000015ac +#define BNX2_EMAC_RX_STAT_AC12 0x000015b0 +#define BNX2_EMAC_RX_STAT_AC13 0x000015b4 +#define BNX2_EMAC_RX_STAT_AC14 0x000015b8 +#define BNX2_EMAC_RX_STAT_AC15 0x000015bc +#define BNX2_EMAC_RX_STAT_AC16 0x000015c0 +#define BNX2_EMAC_RX_STAT_AC17 0x000015c4 +#define BNX2_EMAC_RX_STAT_AC18 0x000015c8 +#define BNX2_EMAC_RX_STAT_AC19 0x000015cc +#define BNX2_EMAC_RX_STAT_AC20 0x000015d0 +#define BNX2_EMAC_RX_STAT_AC21 0x000015d4 +#define BNX2_EMAC_RX_STAT_AC22 0x000015d8 +#define BNX2_EMAC_RXMAC_SUC_DBG_OVERRUNVEC 0x000015dc +#define BNX2_EMAC_TX_STAT_IFHCOUTOCTETS 0x00001600 +#define BNX2_EMAC_TX_STAT_IFHCOUTBADOCTETS 0x00001604 +#define BNX2_EMAC_TX_STAT_ETHERSTATSCOLLISIONS 0x00001608 +#define BNX2_EMAC_TX_STAT_OUTXONSENT 0x0000160c +#define BNX2_EMAC_TX_STAT_OUTXOFFSENT 0x00001610 +#define BNX2_EMAC_TX_STAT_FLOWCONTROLDONE 0x00001614 +#define BNX2_EMAC_TX_STAT_DOT3STATSSINGLECOLLISIONFRAMES 0x00001618 +#define BNX2_EMAC_TX_STAT_DOT3STATSMULTIPLECOLLISIONFRAMES 0x0000161c +#define BNX2_EMAC_TX_STAT_DOT3STATSDEFERREDTRANSMISSIONS 0x00001620 +#define BNX2_EMAC_TX_STAT_DOT3STATSEXCESSIVECOLLISIONS 0x00001624 +#define BNX2_EMAC_TX_STAT_DOT3STATSLATECOLLISIONS 0x00001628 +#define BNX2_EMAC_TX_STAT_IFHCOUTUCASTPKTS 0x0000162c +#define BNX2_EMAC_TX_STAT_IFHCOUTMULTICASTPKTS 0x00001630 +#define BNX2_EMAC_TX_STAT_IFHCOUTBROADCASTPKTS 0x00001634 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS64OCTETS 0x00001638 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS65OCTETSTO127OCTETS 0x0000163c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS128OCTETSTO255OCTETS 0x00001640 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS256OCTETSTO511OCTETS 0x00001644 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS512OCTETSTO1023OCTETS 0x00001648 +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1024OCTETSTO1522OCTETS 0x0000164c +#define BNX2_EMAC_TX_STAT_ETHERSTATSPKTS1523OCTETSTO9022OCTETS 0x00001650 +#define BNX2_EMAC_TX_STAT_DOT3STATSINTERNALMACTRANSMITERRORS 0x00001654 +#define BNX2_EMAC_TXMAC_DEBUG0 0x00001658 +#define BNX2_EMAC_TXMAC_DEBUG1 0x0000165c +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_START0 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA0 (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_DATA3 (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT0 (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_ODI_STATE_WAIT1 (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG1_CRS_ENABLE (1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG1_BAD_CRC (1L<<5) +#define BNX2_EMAC_TXMAC_DEBUG1_SE_COUNTER (0xfL<<6) +#define BNX2_EMAC_TXMAC_DEBUG1_SEND_PAUSE (1L<<10) +#define BNX2_EMAC_TXMAC_DEBUG1_LATE_COLLISION (1L<<11) +#define BNX2_EMAC_TXMAC_DEBUG1_MAX_DEFER (1L<<12) +#define BNX2_EMAC_TXMAC_DEBUG1_DEFERRED (1L<<13) +#define BNX2_EMAC_TXMAC_DEBUG1_ONE_BYTE (1L<<14) +#define BNX2_EMAC_TXMAC_DEBUG1_IPG_TIME (0xfL<<15) +#define BNX2_EMAC_TXMAC_DEBUG1_SLOT_TIME (0xffL<<19) + +#define BNX2_EMAC_TXMAC_DEBUG2 0x00001660 +#define BNX2_EMAC_TXMAC_DEBUG2_BACK_OFF (0x3ffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG2_BYTE_COUNT (0xffffL<<10) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_COUNT (0x1fL<<26) +#define BNX2_EMAC_TXMAC_DEBUG2_COL_BIT (1L<<31) + +#define BNX2_EMAC_TXMAC_DEBUG3 0x00001664 +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE (0xfL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_IDLE (0x0L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE1 (0x1L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_PRE2 (0x2L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SFD (0x3L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_DATA (0x4L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC1 (0x5L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_CRC2 (0x6L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EXT (0x7L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATB (0x8L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_STATG (0x9L<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_JAM (0xaL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_EJAM (0xbL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BJAM (0xcL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_SWAIT (0xdL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_SM_STATE_BACKOFF (0xeL<<0) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE (0x7L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_IDLE (0x0L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_WAIT (0x1L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_UNI (0x2L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_MC (0x3L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC2 (0x4L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC3 (0x5L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_FILT_STATE_BC (0x6L<<4) +#define BNX2_EMAC_TXMAC_DEBUG3_CRS_DONE (1L<<7) +#define BNX2_EMAC_TXMAC_DEBUG3_XOFF (1L<<8) +#define BNX2_EMAC_TXMAC_DEBUG3_SE_COUNTER (0xfL<<9) +#define BNX2_EMAC_TXMAC_DEBUG3_QUANTA_COUNTER (0x1fL<<13) + +#define BNX2_EMAC_TXMAC_DEBUG4 0x00001668 +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_COUNTER (0xffffL<<0) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE (0xfL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_IDLE (0x0L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA1 (0x2L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA2 (0x3L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_MCA3 (0x6L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC1 (0x7L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC2 (0x5L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_SRC3 (0x4L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TYPE (0xcL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CMD (0xeL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_TIME (0xaL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC1 (0x8L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_CRC2 (0x9L<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_PAUSE_STATE_WAIT (0xdL<<16) +#define BNX2_EMAC_TXMAC_DEBUG4_STATS0_VALID (1L<<20) +#define BNX2_EMAC_TXMAC_DEBUG4_APPEND_CRC (1L<<21) +#define BNX2_EMAC_TXMAC_DEBUG4_SLOT_FILLED (1L<<22) +#define BNX2_EMAC_TXMAC_DEBUG4_MAX_DEFER (1L<<23) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_EXTEND (1L<<24) +#define BNX2_EMAC_TXMAC_DEBUG4_SEND_PADDING (1L<<25) +#define BNX2_EMAC_TXMAC_DEBUG4_EOF_LOC (1L<<26) +#define BNX2_EMAC_TXMAC_DEBUG4_COLLIDING (1L<<27) +#define BNX2_EMAC_TXMAC_DEBUG4_COL_IN (1L<<28) +#define BNX2_EMAC_TXMAC_DEBUG4_BURSTING (1L<<29) +#define BNX2_EMAC_TXMAC_DEBUG4_ADVANCE (1L<<30) +#define BNX2_EMAC_TXMAC_DEBUG4_GO (1L<<31) + +#define BNX2_EMAC_TX_STAT_AC0 0x00001680 +#define BNX2_EMAC_TX_STAT_AC1 0x00001684 +#define BNX2_EMAC_TX_STAT_AC2 0x00001688 +#define BNX2_EMAC_TX_STAT_AC3 0x0000168c +#define BNX2_EMAC_TX_STAT_AC4 0x00001690 +#define BNX2_EMAC_TX_STAT_AC5 0x00001694 +#define BNX2_EMAC_TX_STAT_AC6 0x00001698 +#define BNX2_EMAC_TX_STAT_AC7 0x0000169c +#define BNX2_EMAC_TX_STAT_AC8 0x000016a0 +#define BNX2_EMAC_TX_STAT_AC9 0x000016a4 +#define BNX2_EMAC_TX_STAT_AC10 0x000016a8 +#define BNX2_EMAC_TX_STAT_AC11 0x000016ac +#define BNX2_EMAC_TX_STAT_AC12 0x000016b0 +#define BNX2_EMAC_TX_STAT_AC13 0x000016b4 +#define BNX2_EMAC_TX_STAT_AC14 0x000016b8 +#define BNX2_EMAC_TX_STAT_AC15 0x000016bc +#define BNX2_EMAC_TX_STAT_AC16 0x000016c0 +#define BNX2_EMAC_TX_STAT_AC17 0x000016c4 +#define BNX2_EMAC_TX_STAT_AC18 0x000016c8 +#define BNX2_EMAC_TX_STAT_AC19 0x000016cc +#define BNX2_EMAC_TX_STAT_AC20 0x000016d0 +#define BNX2_EMAC_TX_STAT_AC21 0x000016d4 +#define BNX2_EMAC_TXMAC_SUC_DBG_OVERRUNVEC 0x000016d8 + + +/* + * rpm_reg definition + * offset: 0x1800 + */ +#define BNX2_RPM_COMMAND 0x00001800 +#define BNX2_RPM_COMMAND_ENABLED (1L<<0) +#define BNX2_RPM_COMMAND_OVERRUN_ABORT (1L<<4) + +#define BNX2_RPM_STATUS 0x00001804 +#define BNX2_RPM_STATUS_MBUF_WAIT (1L<<0) +#define BNX2_RPM_STATUS_FREE_WAIT (1L<<1) + +#define BNX2_RPM_CONFIG 0x00001808 +#define BNX2_RPM_CONFIG_NO_PSD_HDR_CKSUM (1L<<0) +#define BNX2_RPM_CONFIG_ACPI_ENA (1L<<1) +#define BNX2_RPM_CONFIG_ACPI_KEEP (1L<<2) +#define BNX2_RPM_CONFIG_MP_KEEP (1L<<3) +#define BNX2_RPM_CONFIG_SORT_VECT_VAL (0xfL<<4) +#define BNX2_RPM_CONFIG_IGNORE_VLAN (1L<<31) + +#define BNX2_RPM_VLAN_MATCH0 0x00001810 +#define BNX2_RPM_VLAN_MATCH0_RPM_VLAN_MTCH0_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH1 0x00001814 +#define BNX2_RPM_VLAN_MATCH1_RPM_VLAN_MTCH1_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH2 0x00001818 +#define BNX2_RPM_VLAN_MATCH2_RPM_VLAN_MTCH2_VALUE (0xfffL<<0) + +#define BNX2_RPM_VLAN_MATCH3 0x0000181c +#define BNX2_RPM_VLAN_MATCH3_RPM_VLAN_MTCH3_VALUE (0xfffL<<0) + +#define BNX2_RPM_SORT_USER0 0x00001820 +#define BNX2_RPM_SORT_USER0_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER0_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER0_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER0_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER0_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER0_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER0_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER0_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER1 0x00001824 +#define BNX2_RPM_SORT_USER1_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER1_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER1_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER1_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER1_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER1_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER1_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER1_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER2 0x00001828 +#define BNX2_RPM_SORT_USER2_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER2_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER2_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER2_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER2_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER2_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER2_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER2_ENA (1L<<31) + +#define BNX2_RPM_SORT_USER3 0x0000182c +#define BNX2_RPM_SORT_USER3_PM_EN (0xffffL<<0) +#define BNX2_RPM_SORT_USER3_BC_EN (1L<<16) +#define BNX2_RPM_SORT_USER3_MC_EN (1L<<17) +#define BNX2_RPM_SORT_USER3_MC_HSH_EN (1L<<18) +#define BNX2_RPM_SORT_USER3_PROM_EN (1L<<19) +#define BNX2_RPM_SORT_USER3_VLAN_EN (0xfL<<20) +#define BNX2_RPM_SORT_USER3_PROM_VLAN (1L<<24) +#define BNX2_RPM_SORT_USER3_ENA (1L<<31) + +#define BNX2_RPM_STAT_L2_FILTER_DISCARDS 0x00001840 +#define BNX2_RPM_STAT_RULE_CHECKER_DISCARDS 0x00001844 +#define BNX2_RPM_STAT_IFINFTQDISCARDS 0x00001848 +#define BNX2_RPM_STAT_IFINMBUFDISCARD 0x0000184c +#define BNX2_RPM_STAT_RULE_CHECKER_P4_HIT 0x00001850 +#define BNX2_RPM_STAT_AC0 0x00001880 +#define BNX2_RPM_STAT_AC1 0x00001884 +#define BNX2_RPM_STAT_AC2 0x00001888 +#define BNX2_RPM_STAT_AC3 0x0000188c +#define BNX2_RPM_STAT_AC4 0x00001890 +#define BNX2_RPM_RC_CNTL_0 0x00001900 +#define BNX2_RPM_RC_CNTL_0_OFFSET (0xffL<<0) +#define BNX2_RPM_RC_CNTL_0_CLASS (0x7L<<8) +#define BNX2_RPM_RC_CNTL_0_PRIORITY (1L<<11) +#define BNX2_RPM_RC_CNTL_0_P4 (1L<<12) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE (0x7L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_START (0L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_IP (1L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_TCP (2L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_UDP (3L<<13) +#define BNX2_RPM_RC_CNTL_0_HDR_TYPE_DATA (4L<<13) +#define BNX2_RPM_RC_CNTL_0_COMP (0x3L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_EQUAL (0L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_NEQUAL (1L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_GREATER (2L<<16) +#define BNX2_RPM_RC_CNTL_0_COMP_LESS (3L<<16) +#define BNX2_RPM_RC_CNTL_0_SBIT (1L<<19) +#define BNX2_RPM_RC_CNTL_0_CMDSEL (0xfL<<20) +#define BNX2_RPM_RC_CNTL_0_MAP (1L<<24) +#define BNX2_RPM_RC_CNTL_0_DISCARD (1L<<25) +#define BNX2_RPM_RC_CNTL_0_MASK (1L<<26) +#define BNX2_RPM_RC_CNTL_0_P1 (1L<<27) +#define BNX2_RPM_RC_CNTL_0_P2 (1L<<28) +#define BNX2_RPM_RC_CNTL_0_P3 (1L<<29) +#define BNX2_RPM_RC_CNTL_0_NBIT (1L<<30) + +#define BNX2_RPM_RC_VALUE_MASK_0 0x00001904 +#define BNX2_RPM_RC_VALUE_MASK_0_VALUE (0xffffL<<0) +#define BNX2_RPM_RC_VALUE_MASK_0_MASK (0xffffL<<16) + +#define BNX2_RPM_RC_CNTL_1 0x00001908 +#define BNX2_RPM_RC_CNTL_1_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_1_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_1 0x0000190c +#define BNX2_RPM_RC_CNTL_2 0x00001910 +#define BNX2_RPM_RC_CNTL_2_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_2_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_2 0x00001914 +#define BNX2_RPM_RC_CNTL_3 0x00001918 +#define BNX2_RPM_RC_CNTL_3_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_3_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_3 0x0000191c +#define BNX2_RPM_RC_CNTL_4 0x00001920 +#define BNX2_RPM_RC_CNTL_4_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_4_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_4 0x00001924 +#define BNX2_RPM_RC_CNTL_5 0x00001928 +#define BNX2_RPM_RC_CNTL_5_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_5_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_5 0x0000192c +#define BNX2_RPM_RC_CNTL_6 0x00001930 +#define BNX2_RPM_RC_CNTL_6_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_6_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_6 0x00001934 +#define BNX2_RPM_RC_CNTL_7 0x00001938 +#define BNX2_RPM_RC_CNTL_7_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_7_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_7 0x0000193c +#define BNX2_RPM_RC_CNTL_8 0x00001940 +#define BNX2_RPM_RC_CNTL_8_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_8_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_8 0x00001944 +#define BNX2_RPM_RC_CNTL_9 0x00001948 +#define BNX2_RPM_RC_CNTL_9_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_9_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_9 0x0000194c +#define BNX2_RPM_RC_CNTL_10 0x00001950 +#define BNX2_RPM_RC_CNTL_10_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_10_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_10 0x00001954 +#define BNX2_RPM_RC_CNTL_11 0x00001958 +#define BNX2_RPM_RC_CNTL_11_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_11_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_11 0x0000195c +#define BNX2_RPM_RC_CNTL_12 0x00001960 +#define BNX2_RPM_RC_CNTL_12_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_12_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_12 0x00001964 +#define BNX2_RPM_RC_CNTL_13 0x00001968 +#define BNX2_RPM_RC_CNTL_13_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_13_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_13 0x0000196c +#define BNX2_RPM_RC_CNTL_14 0x00001970 +#define BNX2_RPM_RC_CNTL_14_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_14_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_14 0x00001974 +#define BNX2_RPM_RC_CNTL_15 0x00001978 +#define BNX2_RPM_RC_CNTL_15_A (0x3ffffL<<0) +#define BNX2_RPM_RC_CNTL_15_B (0xfffL<<19) + +#define BNX2_RPM_RC_VALUE_MASK_15 0x0000197c +#define BNX2_RPM_RC_CONFIG 0x00001980 +#define BNX2_RPM_RC_CONFIG_RULE_ENABLE (0xffffL<<0) +#define BNX2_RPM_RC_CONFIG_DEF_CLASS (0x7L<<24) + +#define BNX2_RPM_DEBUG0 0x00001984 +#define BNX2_RPM_DEBUG0_FM_BCNT (0xffffL<<0) +#define BNX2_RPM_DEBUG0_T_DATA_OFST_VLD (1L<<16) +#define BNX2_RPM_DEBUG0_T_UDP_OFST_VLD (1L<<17) +#define BNX2_RPM_DEBUG0_T_TCP_OFST_VLD (1L<<18) +#define BNX2_RPM_DEBUG0_T_IP_OFST_VLD (1L<<19) +#define BNX2_RPM_DEBUG0_IP_MORE_FRGMT (1L<<20) +#define BNX2_RPM_DEBUG0_T_IP_NO_TCP_UDP_HDR (1L<<21) +#define BNX2_RPM_DEBUG0_LLC_SNAP (1L<<22) +#define BNX2_RPM_DEBUG0_FM_STARTED (1L<<23) +#define BNX2_RPM_DEBUG0_DONE (1L<<24) +#define BNX2_RPM_DEBUG0_WAIT_4_DONE (1L<<25) +#define BNX2_RPM_DEBUG0_USE_TPBUF_CKSUM (1L<<26) +#define BNX2_RPM_DEBUG0_RX_NO_PSD_HDR_CKSUM (1L<<27) +#define BNX2_RPM_DEBUG0_IGNORE_VLAN (1L<<28) +#define BNX2_RPM_DEBUG0_RP_ENA_ACTIVE (1L<<31) + +#define BNX2_RPM_DEBUG1 0x00001988 +#define BNX2_RPM_DEBUG1_FSM_CUR_ST (0xffffL<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IDLE (0L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_ALL (1L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IPLLC (2L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B6_IP (4L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ETYPE_B2_IP (8L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP_START (16L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_IP (32L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_TCP (64L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_UDP (128L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_AH (256L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP (512L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ESP_PAYLOAD (1024L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_DATA (2048L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRY (0x2000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_ADD_CARRYOUT (0x4000L<<0) +#define BNX2_RPM_DEBUG1_FSM_CUR_ST_LATCH_RESULT (0x8000L<<0) +#define BNX2_RPM_DEBUG1_HDR_BCNT (0x7ffL<<16) +#define BNX2_RPM_DEBUG1_UNKNOWN_ETYPE_D (1L<<28) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D2 (1L<<29) +#define BNX2_RPM_DEBUG1_VLAN_REMOVED_D1 (1L<<30) +#define BNX2_RPM_DEBUG1_EOF_0XTRA_WD (1L<<31) + +#define BNX2_RPM_DEBUG2 0x0000198c +#define BNX2_RPM_DEBUG2_CMD_HIT_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG2_IP_BCNT (0xffL<<16) +#define BNX2_RPM_DEBUG2_THIS_CMD_M4 (1L<<24) +#define BNX2_RPM_DEBUG2_THIS_CMD_M3 (1L<<25) +#define BNX2_RPM_DEBUG2_THIS_CMD_M2 (1L<<26) +#define BNX2_RPM_DEBUG2_THIS_CMD_M1 (1L<<27) +#define BNX2_RPM_DEBUG2_IPIPE_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG2_FM_DISCARD (1L<<29) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D2 (1L<<30) +#define BNX2_RPM_DEBUG2_LAST_RULE_IN_FM_D1 (1L<<31) + +#define BNX2_RPM_DEBUG3 0x00001990 +#define BNX2_RPM_DEBUG3_AVAIL_MBUF_PTR (0x1ffL<<0) +#define BNX2_RPM_DEBUG3_RDE_RLUPQ_WR_REQ_INT (1L<<9) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_LAST_INT (1L<<10) +#define BNX2_RPM_DEBUG3_RDE_RBUF_WR_REQ_INT (1L<<11) +#define BNX2_RPM_DEBUG3_RDE_RBUF_FREE_REQ (1L<<12) +#define BNX2_RPM_DEBUG3_RDE_RBUF_ALLOC_REQ (1L<<13) +#define BNX2_RPM_DEBUG3_DFSM_MBUF_NOTAVAIL (1L<<14) +#define BNX2_RPM_DEBUG3_RBUF_RDE_SOF_DROP (1L<<15) +#define BNX2_RPM_DEBUG3_DFIFO_VLD_ENTRY_CT (0xfL<<16) +#define BNX2_RPM_DEBUG3_RDE_SRC_FIFO_ALMFULL (1L<<21) +#define BNX2_RPM_DEBUG3_DROP_NXT_VLD (1L<<22) +#define BNX2_RPM_DEBUG3_DROP_NXT (1L<<23) +#define BNX2_RPM_DEBUG3_FTQ_FSM (0x3L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_IDLE (0x0L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_ACK (0x1L<<24) +#define BNX2_RPM_DEBUG3_FTQ_FSM_WAIT_FREE (0x2L<<24) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_SOF (0x0L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_GET_MBUF (0x1L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DMA_DATA (0x2L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DATA (0x3L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_EOF (0x4L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_MF_ACK (0x5L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_WAIT_DROP_NXT_VLD (0x6L<<26) +#define BNX2_RPM_DEBUG3_MBWRITE_FSM_DONE (0x7L<<26) +#define BNX2_RPM_DEBUG3_MBFREE_FSM (1L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_IDLE (0L<<29) +#define BNX2_RPM_DEBUG3_MBFREE_FSM_WAIT_ACK (1L<<29) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM (1L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_ET_MBUF (0x0L<<30) +#define BNX2_RPM_DEBUG3_MBALLOC_FSM_IVE_MBUF (0x1L<<30) +#define BNX2_RPM_DEBUG3_CCODE_EOF_ERROR (1L<<31) + +#define BNX2_RPM_DEBUG4 0x00001994 +#define BNX2_RPM_DEBUG4_DFSM_MBUF_CLUSTER (0x1ffffffL<<0) +#define BNX2_RPM_DEBUG4_DFIFO_CUR_CCODE (0x7L<<25) +#define BNX2_RPM_DEBUG4_MBWRITE_FSM (0x7L<<28) +#define BNX2_RPM_DEBUG4_DFIFO_EMPTY (1L<<31) + +#define BNX2_RPM_DEBUG5 0x00001998 +#define BNX2_RPM_DEBUG5_RDROP_WPTR (0x1fL<<0) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_RPTR (0x1fL<<5) +#define BNX2_RPM_DEBUG5_RDROP_MC_RPTR (0x1fL<<10) +#define BNX2_RPM_DEBUG5_RDROP_RC_RPTR (0x1fL<<15) +#define BNX2_RPM_DEBUG5_RDROP_ACPI_EMPTY (1L<<20) +#define BNX2_RPM_DEBUG5_RDROP_MC_EMPTY (1L<<21) +#define BNX2_RPM_DEBUG5_RDROP_AEOF_VEC_AT_RDROP_MC_RPTR (1L<<22) +#define BNX2_RPM_DEBUG5_HOLDREG_WOL_DROP_INT (1L<<23) +#define BNX2_RPM_DEBUG5_HOLDREG_DISCARD (1L<<24) +#define BNX2_RPM_DEBUG5_HOLDREG_MBUF_NOTAVAIL (1L<<25) +#define BNX2_RPM_DEBUG5_HOLDREG_MC_EMPTY (1L<<26) +#define BNX2_RPM_DEBUG5_HOLDREG_RC_EMPTY (1L<<27) +#define BNX2_RPM_DEBUG5_HOLDREG_FC_EMPTY (1L<<28) +#define BNX2_RPM_DEBUG5_HOLDREG_ACPI_EMPTY (1L<<29) +#define BNX2_RPM_DEBUG5_HOLDREG_FULL_T (1L<<30) +#define BNX2_RPM_DEBUG5_HOLDREG_RD (1L<<31) + +#define BNX2_RPM_DEBUG6 0x0000199c +#define BNX2_RPM_DEBUG6_ACPI_VEC (0xffffL<<0) +#define BNX2_RPM_DEBUG6_VEC (0xffffL<<16) + +#define BNX2_RPM_DEBUG7 0x000019a0 +#define BNX2_RPM_DEBUG7_RPM_DBG7_LAST_CRC (0xffffffffL<<0) + +#define BNX2_RPM_DEBUG8 0x000019a4 +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM (0xfL<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_IDLE (0L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W1_ADDR (1L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W2_ADDR (2L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_W3_ADDR (3L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_SOF_WAIT_THBUF (4L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_DATA (5L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W0_ADDR (6L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W1_ADDR (7L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W2_ADDR (8L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_W3_ADDR (9L<<0) +#define BNX2_RPM_DEBUG8_PS_ACPI_FSM_WAIT_THBUF (10L<<0) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W0 (1L<<4) +#define BNX2_RPM_DEBUG8_COMPARE_AT_W3_DATA (1L<<5) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_WAIT (1L<<6) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W3 (1L<<7) +#define BNX2_RPM_DEBUG8_COMPARE_AT_SOF_W2 (1L<<8) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ6_VLDBYTES (1L<<9) +#define BNX2_RPM_DEBUG8_EOF_W_LTEQ4_VLDBYTES (1L<<10) +#define BNX2_RPM_DEBUG8_NXT_EOF_W_12_VLDBYTES (1L<<11) +#define BNX2_RPM_DEBUG8_EOF_DET (1L<<12) +#define BNX2_RPM_DEBUG8_SOF_DET (1L<<13) +#define BNX2_RPM_DEBUG8_WAIT_4_SOF (1L<<14) +#define BNX2_RPM_DEBUG8_ALL_DONE (1L<<15) +#define BNX2_RPM_DEBUG8_THBUF_ADDR (0x7fL<<16) +#define BNX2_RPM_DEBUG8_BYTE_CTR (0xffL<<24) + +#define BNX2_RPM_DEBUG9 0x000019a8 +#define BNX2_RPM_DEBUG9_OUTFIFO_COUNT (0x7L<<0) +#define BNX2_RPM_DEBUG9_RDE_ACPI_RDY (1L<<3) +#define BNX2_RPM_DEBUG9_VLD_RD_ENTRY_CT (0x7L<<4) +#define BNX2_RPM_DEBUG9_OUTFIFO_OVERRUN_OCCURRED (1L<<28) +#define BNX2_RPM_DEBUG9_INFIFO_OVERRUN_OCCURRED (1L<<29) +#define BNX2_RPM_DEBUG9_ACPI_MATCH_INT (1L<<30) +#define BNX2_RPM_DEBUG9_ACPI_ENABLE_SYN (1L<<31) + +#define BNX2_RPM_ACPI_DBG_BUF_W00 0x000019c0 +#define BNX2_RPM_ACPI_DBG_BUF_W01 0x000019c4 +#define BNX2_RPM_ACPI_DBG_BUF_W02 0x000019c8 +#define BNX2_RPM_ACPI_DBG_BUF_W03 0x000019cc +#define BNX2_RPM_ACPI_DBG_BUF_W10 0x000019d0 +#define BNX2_RPM_ACPI_DBG_BUF_W11 0x000019d4 +#define BNX2_RPM_ACPI_DBG_BUF_W12 0x000019d8 +#define BNX2_RPM_ACPI_DBG_BUF_W13 0x000019dc +#define BNX2_RPM_ACPI_DBG_BUF_W20 0x000019e0 +#define BNX2_RPM_ACPI_DBG_BUF_W21 0x000019e4 +#define BNX2_RPM_ACPI_DBG_BUF_W22 0x000019e8 +#define BNX2_RPM_ACPI_DBG_BUF_W23 0x000019ec +#define BNX2_RPM_ACPI_DBG_BUF_W30 0x000019f0 +#define BNX2_RPM_ACPI_DBG_BUF_W31 0x000019f4 +#define BNX2_RPM_ACPI_DBG_BUF_W32 0x000019f8 +#define BNX2_RPM_ACPI_DBG_BUF_W33 0x000019fc + + +/* + * rbuf_reg definition + * offset: 0x200000 + */ +#define BNX2_RBUF_COMMAND 0x00200000 +#define BNX2_RBUF_COMMAND_ENABLED (1L<<0) +#define BNX2_RBUF_COMMAND_FREE_INIT (1L<<1) +#define BNX2_RBUF_COMMAND_RAM_INIT (1L<<2) +#define BNX2_RBUF_COMMAND_OVER_FREE (1L<<4) +#define BNX2_RBUF_COMMAND_ALLOC_REQ (1L<<5) + +#define BNX2_RBUF_STATUS1 0x00200004 +#define BNX2_RBUF_STATUS1_FREE_COUNT (0x3ffL<<0) + +#define BNX2_RBUF_STATUS2 0x00200008 +#define BNX2_RBUF_STATUS2_FREE_TAIL (0x3ffL<<0) +#define BNX2_RBUF_STATUS2_FREE_HEAD (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG 0x0020000c +#define BNX2_RBUF_CONFIG_XOFF_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG_XON_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_FW_BUF_ALLOC 0x00200010 +#define BNX2_RBUF_FW_BUF_ALLOC_VALUE (0x1ffL<<7) + +#define BNX2_RBUF_FW_BUF_FREE 0x00200014 +#define BNX2_RBUF_FW_BUF_FREE_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_FREE_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_FREE_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_FW_BUF_SEL 0x00200018 +#define BNX2_RBUF_FW_BUF_SEL_COUNT (0x7fL<<0) +#define BNX2_RBUF_FW_BUF_SEL_TAIL (0x1ffL<<7) +#define BNX2_RBUF_FW_BUF_SEL_HEAD (0x1ffL<<16) + +#define BNX2_RBUF_CONFIG2 0x0020001c +#define BNX2_RBUF_CONFIG2_MAC_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG2_MAC_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_CONFIG3 0x00200020 +#define BNX2_RBUF_CONFIG3_CU_DROP_TRIP (0x3ffL<<0) +#define BNX2_RBUF_CONFIG3_CU_KEEP_TRIP (0x3ffL<<16) + +#define BNX2_RBUF_PKT_DATA 0x00208000 +#define BNX2_RBUF_CLIST_DATA 0x00210000 +#define BNX2_RBUF_BUF_DATA 0x00220000 + + +/* + * rv2p_reg definition + * offset: 0x2800 + */ +#define BNX2_RV2P_COMMAND 0x00002800 +#define BNX2_RV2P_COMMAND_ENABLED (1L<<0) +#define BNX2_RV2P_COMMAND_PROC1_INTRPT (1L<<1) +#define BNX2_RV2P_COMMAND_PROC2_INTRPT (1L<<2) +#define BNX2_RV2P_COMMAND_ABORT0 (1L<<4) +#define BNX2_RV2P_COMMAND_ABORT1 (1L<<5) +#define BNX2_RV2P_COMMAND_ABORT2 (1L<<6) +#define BNX2_RV2P_COMMAND_ABORT3 (1L<<7) +#define BNX2_RV2P_COMMAND_ABORT4 (1L<<8) +#define BNX2_RV2P_COMMAND_ABORT5 (1L<<9) +#define BNX2_RV2P_COMMAND_PROC1_RESET (1L<<16) +#define BNX2_RV2P_COMMAND_PROC2_RESET (1L<<17) +#define BNX2_RV2P_COMMAND_CTXIF_RESET (1L<<18) + +#define BNX2_RV2P_STATUS 0x00002804 +#define BNX2_RV2P_STATUS_ALWAYS_0 (1L<<0) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT0_CNT (1L<<8) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT1_CNT (1L<<9) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT2_CNT (1L<<10) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT3_CNT (1L<<11) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT4_CNT (1L<<12) +#define BNX2_RV2P_STATUS_RV2P_GEN_STAT5_CNT (1L<<13) + +#define BNX2_RV2P_CONFIG 0x00002808 +#define BNX2_RV2P_CONFIG_STALL_PROC1 (1L<<0) +#define BNX2_RV2P_CONFIG_STALL_PROC2 (1L<<1) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT0 (1L<<8) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT1 (1L<<9) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT2 (1L<<10) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT3 (1L<<11) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT4 (1L<<12) +#define BNX2_RV2P_CONFIG_PROC1_STALL_ON_ABORT5 (1L<<13) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT0 (1L<<16) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT1 (1L<<17) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT2 (1L<<18) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT3 (1L<<19) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT4 (1L<<20) +#define BNX2_RV2P_CONFIG_PROC2_STALL_ON_ABORT5 (1L<<21) +#define BNX2_RV2P_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_RV2P_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_RV2P_GEN_BFR_ADDR_0 0x00002810 +#define BNX2_RV2P_GEN_BFR_ADDR_0_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_1 0x00002814 +#define BNX2_RV2P_GEN_BFR_ADDR_1_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_2 0x00002818 +#define BNX2_RV2P_GEN_BFR_ADDR_2_VALUE (0xffffL<<16) + +#define BNX2_RV2P_GEN_BFR_ADDR_3 0x0000281c +#define BNX2_RV2P_GEN_BFR_ADDR_3_VALUE (0xffffL<<16) + +#define BNX2_RV2P_INSTR_HIGH 0x00002830 +#define BNX2_RV2P_INSTR_HIGH_HIGH (0x1fL<<0) + +#define BNX2_RV2P_INSTR_LOW 0x00002834 +#define BNX2_RV2P_PROC1_ADDR_CMD 0x00002838 +#define BNX2_RV2P_PROC1_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC1_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC2_ADDR_CMD 0x0000283c +#define BNX2_RV2P_PROC2_ADDR_CMD_ADD (0x3ffL<<0) +#define BNX2_RV2P_PROC2_ADDR_CMD_RDWR (1L<<31) + +#define BNX2_RV2P_PROC1_GRC_DEBUG 0x00002840 +#define BNX2_RV2P_PROC2_GRC_DEBUG 0x00002844 +#define BNX2_RV2P_GRC_PROC_DEBUG 0x00002848 +#define BNX2_RV2P_DEBUG_VECT_PEEK 0x0000284c +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RV2P_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RV2P_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RV2P_PFTQ_DATA 0x00002b40 +#define BNX2_RV2P_PFTQ_CMD 0x00002b78 +#define BNX2_RV2P_PFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_PFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_PFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_PFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_PFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_PFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_PFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_PFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_PFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_PFTQ_CTL 0x00002b7c +#define BNX2_RV2P_PFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_PFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_PFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_PFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_PFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_TFTQ_DATA 0x00002b80 +#define BNX2_RV2P_TFTQ_CMD 0x00002bb8 +#define BNX2_RV2P_TFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_TFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_TFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_TFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_TFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_TFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_TFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_TFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_TFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_TFTQ_CTL 0x00002bbc +#define BNX2_RV2P_TFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_TFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_TFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_TFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_TFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RV2P_MFTQ_DATA 0x00002bc0 +#define BNX2_RV2P_MFTQ_CMD 0x00002bf8 +#define BNX2_RV2P_MFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RV2P_MFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RV2P_MFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RV2P_MFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RV2P_MFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RV2P_MFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RV2P_MFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RV2P_MFTQ_CMD_POP (1L<<30) +#define BNX2_RV2P_MFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RV2P_MFTQ_CTL 0x00002bfc +#define BNX2_RV2P_MFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RV2P_MFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RV2P_MFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RV2P_MFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RV2P_MFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * mq_reg definition + * offset: 0x3c00 + */ +#define BNX2_MQ_COMMAND 0x00003c00 +#define BNX2_MQ_COMMAND_ENABLED (1L<<0) +#define BNX2_MQ_COMMAND_OVERFLOW (1L<<4) +#define BNX2_MQ_COMMAND_WR_ERROR (1L<<5) +#define BNX2_MQ_COMMAND_RD_ERROR (1L<<6) + +#define BNX2_MQ_STATUS 0x00003c04 +#define BNX2_MQ_STATUS_CTX_ACCESS_STAT (1L<<16) +#define BNX2_MQ_STATUS_CTX_ACCESS64_STAT (1L<<17) +#define BNX2_MQ_STATUS_PCI_STALL_STAT (1L<<18) + +#define BNX2_MQ_CONFIG 0x00003c08 +#define BNX2_MQ_CONFIG_TX_HIGH_PRI (1L<<0) +#define BNX2_MQ_CONFIG_HALT_DIS (1L<<1) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE (0x7L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_256 (0L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_512 (1L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_1K (2L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_2K (3L<<4) +#define BNX2_MQ_CONFIG_KNL_BYP_BLK_SIZE_4K (4L<<4) +#define BNX2_MQ_CONFIG_MAX_DEPTH (0x7fL<<8) +#define BNX2_MQ_CONFIG_CUR_DEPTH (0x7fL<<20) + +#define BNX2_MQ_ENQUEUE1 0x00003c0c +#define BNX2_MQ_ENQUEUE1_OFFSET (0x3fL<<2) +#define BNX2_MQ_ENQUEUE1_CID (0x3fffL<<8) +#define BNX2_MQ_ENQUEUE1_BYTE_MASK (0xfL<<24) +#define BNX2_MQ_ENQUEUE1_KNL_MODE (1L<<28) + +#define BNX2_MQ_ENQUEUE2 0x00003c10 +#define BNX2_MQ_BAD_WR_ADDR 0x00003c14 +#define BNX2_MQ_BAD_RD_ADDR 0x00003c18 +#define BNX2_MQ_KNL_BYP_WIND_START 0x00003c1c +#define BNX2_MQ_KNL_BYP_WIND_START_VALUE (0xfffffL<<12) + +#define BNX2_MQ_KNL_WIND_END 0x00003c20 +#define BNX2_MQ_KNL_WIND_END_VALUE (0xffffffL<<8) + +#define BNX2_MQ_KNL_WRITE_MASK1 0x00003c24 +#define BNX2_MQ_KNL_TX_MASK1 0x00003c28 +#define BNX2_MQ_KNL_CMD_MASK1 0x00003c2c +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK1 0x00003c30 +#define BNX2_MQ_KNL_RX_V2P_MASK1 0x00003c34 +#define BNX2_MQ_KNL_WRITE_MASK2 0x00003c38 +#define BNX2_MQ_KNL_TX_MASK2 0x00003c3c +#define BNX2_MQ_KNL_CMD_MASK2 0x00003c40 +#define BNX2_MQ_KNL_COND_ENQUEUE_MASK2 0x00003c44 +#define BNX2_MQ_KNL_RX_V2P_MASK2 0x00003c48 +#define BNX2_MQ_KNL_BYP_WRITE_MASK1 0x00003c4c +#define BNX2_MQ_KNL_BYP_TX_MASK1 0x00003c50 +#define BNX2_MQ_KNL_BYP_CMD_MASK1 0x00003c54 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK1 0x00003c58 +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK1 0x00003c5c +#define BNX2_MQ_KNL_BYP_WRITE_MASK2 0x00003c60 +#define BNX2_MQ_KNL_BYP_TX_MASK2 0x00003c64 +#define BNX2_MQ_KNL_BYP_CMD_MASK2 0x00003c68 +#define BNX2_MQ_KNL_BYP_COND_ENQUEUE_MASK2 0x00003c6c +#define BNX2_MQ_KNL_BYP_RX_V2P_MASK2 0x00003c70 +#define BNX2_MQ_MEM_WR_ADDR 0x00003c74 +#define BNX2_MQ_MEM_WR_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_WR_DATA0 0x00003c78 +#define BNX2_MQ_MEM_WR_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA1 0x00003c7c +#define BNX2_MQ_MEM_WR_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_WR_DATA2 0x00003c80 +#define BNX2_MQ_MEM_WR_DATA2_VALUE (0x3fffffffL<<0) + +#define BNX2_MQ_MEM_RD_ADDR 0x00003c84 +#define BNX2_MQ_MEM_RD_ADDR_VALUE (0x3fL<<0) + +#define BNX2_MQ_MEM_RD_DATA0 0x00003c88 +#define BNX2_MQ_MEM_RD_DATA0_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA1 0x00003c8c +#define BNX2_MQ_MEM_RD_DATA1_VALUE (0xffffffffL<<0) + +#define BNX2_MQ_MEM_RD_DATA2 0x00003c90 +#define BNX2_MQ_MEM_RD_DATA2_VALUE (0x3fffffffL<<0) + + + +/* + * tbdr_reg definition + * offset: 0x5000 + */ +#define BNX2_TBDR_COMMAND 0x00005000 +#define BNX2_TBDR_COMMAND_ENABLE (1L<<0) +#define BNX2_TBDR_COMMAND_SOFT_RST (1L<<1) +#define BNX2_TBDR_COMMAND_MSTR_ABORT (1L<<4) + +#define BNX2_TBDR_STATUS 0x00005004 +#define BNX2_TBDR_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TBDR_STATUS_FTQ_WAIT (1L<<1) +#define BNX2_TBDR_STATUS_FIFO_OVERFLOW (1L<<2) +#define BNX2_TBDR_STATUS_FIFO_UNDERFLOW (1L<<3) +#define BNX2_TBDR_STATUS_SEARCHMISS_ERROR (1L<<4) +#define BNX2_TBDR_STATUS_FTQ_ENTRY_CNT (1L<<5) +#define BNX2_TBDR_STATUS_BURST_CNT (1L<<6) + +#define BNX2_TBDR_CONFIG 0x00005008 +#define BNX2_TBDR_CONFIG_MAX_BDS (0xffL<<0) +#define BNX2_TBDR_CONFIG_SWAP_MODE (1L<<8) +#define BNX2_TBDR_CONFIG_PRIORITY (1L<<9) +#define BNX2_TBDR_CONFIG_CACHE_NEXT_PAGE_PTRS (1L<<10) +#define BNX2_TBDR_CONFIG_PAGE_SIZE (0xfL<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256 (0L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512 (1L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1K (2L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_2K (3L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_4K (4L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_8K (5L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_16K (6L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_32K (7L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_64K (8L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_128K (9L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_256K (10L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_512K (11L<<24) +#define BNX2_TBDR_CONFIG_PAGE_SIZE_1M (12L<<24) + +#define BNX2_TBDR_DEBUG_VECT_PEEK 0x0000500c +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TBDR_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TBDR_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TBDR_FTQ_DATA 0x000053c0 +#define BNX2_TBDR_FTQ_CMD 0x000053f8 +#define BNX2_TBDR_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TBDR_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TBDR_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TBDR_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TBDR_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TBDR_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TBDR_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TBDR_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TBDR_FTQ_CMD_POP (1L<<30) +#define BNX2_TBDR_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TBDR_FTQ_CTL 0x000053fc +#define BNX2_TBDR_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TBDR_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TBDR_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TBDR_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TBDR_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * tdma_reg definition + * offset: 0x5c00 + */ +#define BNX2_TDMA_COMMAND 0x00005c00 +#define BNX2_TDMA_COMMAND_ENABLED (1L<<0) +#define BNX2_TDMA_COMMAND_MASTER_ABORT (1L<<4) +#define BNX2_TDMA_COMMAND_BAD_L2_LENGTH_ABORT (1L<<7) + +#define BNX2_TDMA_STATUS 0x00005c04 +#define BNX2_TDMA_STATUS_DMA_WAIT (1L<<0) +#define BNX2_TDMA_STATUS_PAYLOAD_WAIT (1L<<1) +#define BNX2_TDMA_STATUS_PATCH_FTQ_WAIT (1L<<2) +#define BNX2_TDMA_STATUS_LOCK_WAIT (1L<<3) +#define BNX2_TDMA_STATUS_FTQ_ENTRY_CNT (1L<<16) +#define BNX2_TDMA_STATUS_BURST_CNT (1L<<17) + +#define BNX2_TDMA_CONFIG 0x00005c08 +#define BNX2_TDMA_CONFIG_ONE_DMA (1L<<0) +#define BNX2_TDMA_CONFIG_ONE_RECORD (1L<<1) +#define BNX2_TDMA_CONFIG_LIMIT_SZ (0xfL<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_64 (0L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_128 (0x4L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_256 (0x6L<<4) +#define BNX2_TDMA_CONFIG_LIMIT_SZ_512 (0x8L<<4) +#define BNX2_TDMA_CONFIG_LINE_SZ (0xfL<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_64 (0L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_128 (4L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_256 (6L<<8) +#define BNX2_TDMA_CONFIG_LINE_SZ_512 (8L<<8) +#define BNX2_TDMA_CONFIG_ALIGN_ENA (1L<<15) +#define BNX2_TDMA_CONFIG_CHK_L2_BD (1L<<16) +#define BNX2_TDMA_CONFIG_FIFO_CMP (0xfL<<20) + +#define BNX2_TDMA_PAYLOAD_PROD 0x00005c0c +#define BNX2_TDMA_PAYLOAD_PROD_VALUE (0x1fffL<<3) + +#define BNX2_TDMA_DBG_WATCHDOG 0x00005c10 +#define BNX2_TDMA_DBG_TRIGGER 0x00005c14 +#define BNX2_TDMA_DMAD_FSM 0x00005c80 +#define BNX2_TDMA_DMAD_FSM_BD_INVLD (1L<<0) +#define BNX2_TDMA_DMAD_FSM_PUSH (0xfL<<4) +#define BNX2_TDMA_DMAD_FSM_ARB_TBDC (0x3L<<8) +#define BNX2_TDMA_DMAD_FSM_ARB_CTX (1L<<12) +#define BNX2_TDMA_DMAD_FSM_DR_INTF (1L<<16) +#define BNX2_TDMA_DMAD_FSM_DMAD (0x7L<<20) +#define BNX2_TDMA_DMAD_FSM_BD (0xfL<<24) + +#define BNX2_TDMA_DMAD_STATUS 0x00005c84 +#define BNX2_TDMA_DMAD_STATUS_RHOLD_PUSH_ENTRY (0x3L<<0) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_DMAD_ENTRY (0x3L<<4) +#define BNX2_TDMA_DMAD_STATUS_RHOLD_BD_ENTRY (0x3L<<8) +#define BNX2_TDMA_DMAD_STATUS_IFTQ_ENUM (0xfL<<12) + +#define BNX2_TDMA_DR_INTF_FSM 0x00005c88 +#define BNX2_TDMA_DR_INTF_FSM_L2_COMP (0x3L<<0) +#define BNX2_TDMA_DR_INTF_FSM_TPATQ (0x7L<<4) +#define BNX2_TDMA_DR_INTF_FSM_TPBUF (0x3L<<8) +#define BNX2_TDMA_DR_INTF_FSM_DR_BUF (0x7L<<12) +#define BNX2_TDMA_DR_INTF_FSM_DMAD (0x7L<<16) + +#define BNX2_TDMA_DR_INTF_STATUS 0x00005c8c +#define BNX2_TDMA_DR_INTF_STATUS_HOLE_PHASE (0x7L<<0) +#define BNX2_TDMA_DR_INTF_STATUS_DATA_AVAIL (0x3L<<4) +#define BNX2_TDMA_DR_INTF_STATUS_SHIFT_ADDR (0x7L<<8) +#define BNX2_TDMA_DR_INTF_STATUS_NXT_PNTR (0xfL<<12) +#define BNX2_TDMA_DR_INTF_STATUS_BYTE_COUNT (0x7L<<16) + +#define BNX2_TDMA_FTQ_DATA 0x00005fc0 +#define BNX2_TDMA_FTQ_CMD 0x00005ff8 +#define BNX2_TDMA_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TDMA_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TDMA_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TDMA_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TDMA_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TDMA_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TDMA_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TDMA_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TDMA_FTQ_CMD_POP (1L<<30) +#define BNX2_TDMA_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TDMA_FTQ_CTL 0x00005ffc +#define BNX2_TDMA_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TDMA_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TDMA_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TDMA_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TDMA_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + + + +/* + * hc_reg definition + * offset: 0x6800 + */ +#define BNX2_HC_COMMAND 0x00006800 +#define BNX2_HC_COMMAND_ENABLE (1L<<0) +#define BNX2_HC_COMMAND_SKIP_ABORT (1L<<4) +#define BNX2_HC_COMMAND_COAL_NOW (1L<<16) +#define BNX2_HC_COMMAND_COAL_NOW_WO_INT (1L<<17) +#define BNX2_HC_COMMAND_STATS_NOW (1L<<18) +#define BNX2_HC_COMMAND_FORCE_INT (0x3L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_NULL (0L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_HIGH (1L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_LOW (2L<<19) +#define BNX2_HC_COMMAND_FORCE_INT_FREE (3L<<19) +#define BNX2_HC_COMMAND_CLR_STAT_NOW (1L<<21) + +#define BNX2_HC_STATUS 0x00006804 +#define BNX2_HC_STATUS_MASTER_ABORT (1L<<0) +#define BNX2_HC_STATUS_PARITY_ERROR_STATE (1L<<1) +#define BNX2_HC_STATUS_PCI_CLK_CNT_STAT (1L<<16) +#define BNX2_HC_STATUS_CORE_CLK_CNT_STAT (1L<<17) +#define BNX2_HC_STATUS_NUM_STATUS_BLOCKS_STAT (1L<<18) +#define BNX2_HC_STATUS_NUM_INT_GEN_STAT (1L<<19) +#define BNX2_HC_STATUS_NUM_INT_MBOX_WR_STAT (1L<<20) +#define BNX2_HC_STATUS_CORE_CLKS_TO_HW_INTACK_STAT (1L<<23) +#define BNX2_HC_STATUS_CORE_CLKS_TO_SW_INTACK_STAT (1L<<24) +#define BNX2_HC_STATUS_CORE_CLKS_DURING_SW_INTACK_STAT (1L<<25) + +#define BNX2_HC_CONFIG 0x00006808 +#define BNX2_HC_CONFIG_COLLECT_STATS (1L<<0) +#define BNX2_HC_CONFIG_RX_TMR_MODE (1L<<1) +#define BNX2_HC_CONFIG_TX_TMR_MODE (1L<<2) +#define BNX2_HC_CONFIG_COM_TMR_MODE (1L<<3) +#define BNX2_HC_CONFIG_CMD_TMR_MODE (1L<<4) +#define BNX2_HC_CONFIG_STATISTIC_PRIORITY (1L<<5) +#define BNX2_HC_CONFIG_STATUS_PRIORITY (1L<<6) +#define BNX2_HC_CONFIG_STAT_MEM_ADDR (0xffL<<8) + +#define BNX2_HC_ATTN_BITS_ENABLE 0x0000680c +#define BNX2_HC_STATUS_ADDR_L 0x00006810 +#define BNX2_HC_STATUS_ADDR_H 0x00006814 +#define BNX2_HC_STATISTICS_ADDR_L 0x00006818 +#define BNX2_HC_STATISTICS_ADDR_H 0x0000681c +#define BNX2_HC_TX_QUICK_CONS_TRIP 0x00006820 +#define BNX2_HC_TX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_TX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_COMP_PROD_TRIP 0x00006824 +#define BNX2_HC_COMP_PROD_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_COMP_PROD_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_QUICK_CONS_TRIP 0x00006828 +#define BNX2_HC_RX_QUICK_CONS_TRIP_VALUE (0xffL<<0) +#define BNX2_HC_RX_QUICK_CONS_TRIP_INT (0xffL<<16) + +#define BNX2_HC_RX_TICKS 0x0000682c +#define BNX2_HC_RX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_RX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_TX_TICKS 0x00006830 +#define BNX2_HC_TX_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_TX_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_COM_TICKS 0x00006834 +#define BNX2_HC_COM_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_COM_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_CMD_TICKS 0x00006838 +#define BNX2_HC_CMD_TICKS_VALUE (0x3ffL<<0) +#define BNX2_HC_CMD_TICKS_INT (0x3ffL<<16) + +#define BNX2_HC_PERIODIC_TICKS 0x0000683c +#define BNX2_HC_PERIODIC_TICKS_HC_PERIODIC_TICKS (0xffffL<<0) + +#define BNX2_HC_STAT_COLLECT_TICKS 0x00006840 +#define BNX2_HC_STAT_COLLECT_TICKS_HC_STAT_COLL_TICKS (0xffL<<4) + +#define BNX2_HC_STATS_TICKS 0x00006844 +#define BNX2_HC_STATS_TICKS_HC_STAT_TICKS (0xffffL<<8) + +#define BNX2_HC_STAT_MEM_DATA 0x0000684c +#define BNX2_HC_STAT_GEN_SEL_0 0x00006850 +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT0 (0L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT1 (1L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT2 (2L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT3 (3L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT4 (4L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT5 (5L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT6 (6L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT7 (7L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT8 (8L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT9 (9L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT10 (10L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXP_STAT11 (11L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT0 (12L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT1 (13L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT2 (14L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT3 (15L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT4 (16L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT5 (17L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT6 (18L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXP_STAT7 (19L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT0 (20L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT1 (21L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT2 (22L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT3 (23L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT4 (24L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT5 (25L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT6 (26L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT7 (27L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT8 (28L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT9 (29L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT10 (30L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COM_STAT11 (31L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT0 (32L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT1 (33L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT2 (34L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPAT_STAT3 (35L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT0 (36L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT1 (37L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT2 (38L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT3 (39L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT4 (40L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT5 (41L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT6 (42L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CP_STAT7 (43L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT0 (44L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT1 (45L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT2 (46L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT3 (47L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT4 (48L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT5 (49L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT6 (50L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MCP_STAT7 (51L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_PCI_CLK_CNT (52L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CORE_CLK_CNT (53L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_STATUS_BLOCKS (54L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_GEN (55L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_NUM_INT_MBOX_WR (56L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_HW_INTACK (59L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_TO_SW_INTACK (60L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_HC_CORE_CLKS_DURING_SW_INTACK (61L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_CMD_CNT (62L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCH_SLOT_CNT (63L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_CMD_CNT (64L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSCH_SLOT_CNT (65L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUPQ_VALID_CNT (66L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPQ_VALID_CNT (67L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RXPCQ_VALID_CNT (68L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PPQ_VALID_CNT (69L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PMQ_VALID_CNT (70L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2PTQ_VALID_CNT (71L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMAQ_VALID_CNT (72L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TSCHQ_VALID_CNT (73L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDRQ_VALID_CNT (74L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TXPQ_VALID_CNT (75L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMAQ_VALID_CNT (76L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TPATQ_VALID_CNT (77L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TASQ_VALID_CNT (78L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CSQ_VALID_CNT (79L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CPQ_VALID_CNT (80L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMXQ_VALID_CNT (81L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMTQ_VALID_CNT (82L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_COMQ_VALID_CNT (83L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MGMQ_VALID_CNT (84L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_TRANSFERS_CNT (85L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_READ_DELAY_PCI_CLKS_CNT (86L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_TRANSFERS_CNT (87L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_DELAY_PCI_CLKS_CNT (88L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_READ_RETRY_AFTER_DATA_CNT (89L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_TRANSFERS_CNT (90L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_WRITE_DELAY_PCI_CLKS_CNT (91L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_TRANSFERS_CNT (92L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_DELAY_PCI_CLKS_CNT (93L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_DMAE_BIG_WRITE_RETRY_AFTER_DATA_CNT (94L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_WR_CNT64 (95L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_RD_CNT64 (96L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_ACC_STALL_CLKS (97L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_CTX_LOCK_STALL_CLKS (98L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS_STAT (99L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_CTX_ACCESS64_STAT (100L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_MBQ_PCI_STALL_STAT (101L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_FTQ_ENTRY_CNT (102L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TBDR_BURST_CNT (103L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_FTQ_ENTRY_CNT (104L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TDMA_BURST_CNT (105L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_FTQ_ENTRY_CNT (106L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RDMA_BURST_CNT (107L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RLUP_MATCH_CNT (108L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_POLL_PASS_CNT (109L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR1_CNT (110L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR2_CNT (111L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR3_CNT (112L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR4_CNT (113L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_TMR_TMR5_CNT (114L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT0 (115L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT1 (116L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT2 (117L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT3 (118L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT4 (119L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RV2P_STAT5 (120L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC1_MISS (121L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_PROC2_MISS (122L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_0_RBDC_BURST_CNT (127L<<0) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_1 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_2 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_0_GEN_SEL_3 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_1 0x00006854 +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_4 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_5 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_6 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_1_GEN_SEL_7 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_2 0x00006858 +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_8 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_9 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_10 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_2_GEN_SEL_11 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_SEL_3 0x0000685c +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_12 (0x7fL<<0) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_13 (0x7fL<<8) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_14 (0x7fL<<16) +#define BNX2_HC_STAT_GEN_SEL_3_GEN_SEL_15 (0x7fL<<24) + +#define BNX2_HC_STAT_GEN_STAT0 0x00006888 +#define BNX2_HC_STAT_GEN_STAT1 0x0000688c +#define BNX2_HC_STAT_GEN_STAT2 0x00006890 +#define BNX2_HC_STAT_GEN_STAT3 0x00006894 +#define BNX2_HC_STAT_GEN_STAT4 0x00006898 +#define BNX2_HC_STAT_GEN_STAT5 0x0000689c +#define BNX2_HC_STAT_GEN_STAT6 0x000068a0 +#define BNX2_HC_STAT_GEN_STAT7 0x000068a4 +#define BNX2_HC_STAT_GEN_STAT8 0x000068a8 +#define BNX2_HC_STAT_GEN_STAT9 0x000068ac +#define BNX2_HC_STAT_GEN_STAT10 0x000068b0 +#define BNX2_HC_STAT_GEN_STAT11 0x000068b4 +#define BNX2_HC_STAT_GEN_STAT12 0x000068b8 +#define BNX2_HC_STAT_GEN_STAT13 0x000068bc +#define BNX2_HC_STAT_GEN_STAT14 0x000068c0 +#define BNX2_HC_STAT_GEN_STAT15 0x000068c4 +#define BNX2_HC_STAT_GEN_STAT_AC0 0x000068c8 +#define BNX2_HC_STAT_GEN_STAT_AC1 0x000068cc +#define BNX2_HC_STAT_GEN_STAT_AC2 0x000068d0 +#define BNX2_HC_STAT_GEN_STAT_AC3 0x000068d4 +#define BNX2_HC_STAT_GEN_STAT_AC4 0x000068d8 +#define BNX2_HC_STAT_GEN_STAT_AC5 0x000068dc +#define BNX2_HC_STAT_GEN_STAT_AC6 0x000068e0 +#define BNX2_HC_STAT_GEN_STAT_AC7 0x000068e4 +#define BNX2_HC_STAT_GEN_STAT_AC8 0x000068e8 +#define BNX2_HC_STAT_GEN_STAT_AC9 0x000068ec +#define BNX2_HC_STAT_GEN_STAT_AC10 0x000068f0 +#define BNX2_HC_STAT_GEN_STAT_AC11 0x000068f4 +#define BNX2_HC_STAT_GEN_STAT_AC12 0x000068f8 +#define BNX2_HC_STAT_GEN_STAT_AC13 0x000068fc +#define BNX2_HC_STAT_GEN_STAT_AC14 0x00006900 +#define BNX2_HC_STAT_GEN_STAT_AC15 0x00006904 +#define BNX2_HC_VIS 0x00006908 +#define BNX2_HC_VIS_STAT_BUILD_STATE (0xfL<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_IDLE (0L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_START (1L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_REQUEST (2L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE64 (3L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE32 (4L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_UPDATE_DONE (5L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_DMA (6L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_CONTROL (7L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_LOW (8L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_HIGH (9L<<0) +#define BNX2_HC_VIS_STAT_BUILD_STATE_MSI_DATA (10L<<0) +#define BNX2_HC_VIS_DMA_STAT_STATE (0xfL<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_IDLE (0L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_PARAM (1L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATUS_DMA (2L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP (3L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_COMP (4L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_PARAM (5L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_STATISTIC_DMA (6L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_1 (7L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WRITE_COMP_2 (8L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_WAIT (9L<<8) +#define BNX2_HC_VIS_DMA_STAT_STATE_ABORT (15L<<8) +#define BNX2_HC_VIS_DMA_MSI_STATE (0x7L<<12) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE (0x3L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_IDLE (0L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_COUNT (1L<<15) +#define BNX2_HC_VIS_STATISTIC_DMA_EN_STATE_START (2L<<15) + +#define BNX2_HC_VIS_1 0x0000690c +#define BNX2_HC_VIS_1_HW_INTACK_STATE (1L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_IDLE (0L<<4) +#define BNX2_HC_VIS_1_HW_INTACK_STATE_COUNT (1L<<4) +#define BNX2_HC_VIS_1_SW_INTACK_STATE (1L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_IDLE (0L<<5) +#define BNX2_HC_VIS_1_SW_INTACK_STATE_COUNT (1L<<5) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE (1L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_IDLE (0L<<6) +#define BNX2_HC_VIS_1_DURING_SW_INTACK_STATE_COUNT (1L<<6) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE (1L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_IDLE (0L<<7) +#define BNX2_HC_VIS_1_MAILBOX_COUNT_STATE_COUNT (1L<<7) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE (0xfL<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_IDLE (0L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_DMA (1L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_UPDATE (2L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_ASSIGN (3L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_WAIT (4L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_UPDATE (5L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_ASSIGN (6L<<17) +#define BNX2_HC_VIS_1_RAM_RD_ARB_STATE_REG_WAIT (7L<<17) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE (0x3L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_NORMAL (0L<<21) +#define BNX2_HC_VIS_1_RAM_WR_ARB_STATE_CLEAR (1L<<21) +#define BNX2_HC_VIS_1_INT_GEN_STATE (1L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_DLE (0L<<23) +#define BNX2_HC_VIS_1_INT_GEN_STATE_NTERRUPT (1L<<23) +#define BNX2_HC_VIS_1_STAT_CHAN_ID (0x7L<<24) +#define BNX2_HC_VIS_1_INT_B (1L<<27) + +#define BNX2_HC_DEBUG_VECT_PEEK 0x00006910 +#define BNX2_HC_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_HC_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_HC_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_HC_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_HC_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_HC_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + + + +/* + * txp_reg definition + * offset: 0x40000 + */ +#define BNX2_TXP_CPU_MODE 0x00045000 +#define BNX2_TXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TXP_CPU_STATE 0x00045004 +#define BNX2_TXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TXP_CPU_EVENT_MASK 0x00045008 +#define BNX2_TXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TXP_CPU_PROGRAM_COUNTER 0x0004501c +#define BNX2_TXP_CPU_INSTRUCTION 0x00045020 +#define BNX2_TXP_CPU_DATA_ACCESS 0x00045024 +#define BNX2_TXP_CPU_INTERRUPT_ENABLE 0x00045028 +#define BNX2_TXP_CPU_INTERRUPT_VECTOR 0x0004502c +#define BNX2_TXP_CPU_INTERRUPT_SAVED_PC 0x00045030 +#define BNX2_TXP_CPU_HW_BREAKPOINT 0x00045034 +#define BNX2_TXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK 0x00045038 +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR 0x00045048 +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TXP_CPU_REG_FILE 0x00045200 +#define BNX2_TXP_FTQ_DATA 0x000453c0 +#define BNX2_TXP_FTQ_CMD 0x000453f8 +#define BNX2_TXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TXP_FTQ_CMD_POP (1L<<30) +#define BNX2_TXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TXP_FTQ_CTL 0x000453fc +#define BNX2_TXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TXP_SCRATCH 0x00060000 + + +/* + * tpat_reg definition + * offset: 0x80000 + */ +#define BNX2_TPAT_CPU_MODE 0x00085000 +#define BNX2_TPAT_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_TPAT_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_TPAT_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_TPAT_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_TPAT_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_TPAT_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_TPAT_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_TPAT_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_TPAT_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_TPAT_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_TPAT_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_TPAT_CPU_STATE 0x00085004 +#define BNX2_TPAT_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_TPAT_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_TPAT_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_TPAT_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_TPAT_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_TPAT_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_TPAT_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_TPAT_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_TPAT_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_TPAT_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_TPAT_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_TPAT_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_TPAT_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_TPAT_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_TPAT_CPU_EVENT_MASK 0x00085008 +#define BNX2_TPAT_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_TPAT_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_TPAT_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_TPAT_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_TPAT_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_TPAT_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_TPAT_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_TPAT_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_TPAT_CPU_PROGRAM_COUNTER 0x0008501c +#define BNX2_TPAT_CPU_INSTRUCTION 0x00085020 +#define BNX2_TPAT_CPU_DATA_ACCESS 0x00085024 +#define BNX2_TPAT_CPU_INTERRUPT_ENABLE 0x00085028 +#define BNX2_TPAT_CPU_INTERRUPT_VECTOR 0x0008502c +#define BNX2_TPAT_CPU_INTERRUPT_SAVED_PC 0x00085030 +#define BNX2_TPAT_CPU_HW_BREAKPOINT 0x00085034 +#define BNX2_TPAT_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_TPAT_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK 0x00085038 +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_TPAT_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR 0x00085048 +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_TPAT_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_TPAT_CPU_REG_FILE 0x00085200 +#define BNX2_TPAT_FTQ_DATA 0x000853c0 +#define BNX2_TPAT_FTQ_CMD 0x000853f8 +#define BNX2_TPAT_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_TPAT_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_TPAT_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_TPAT_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_TPAT_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_TPAT_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_TPAT_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_TPAT_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_TPAT_FTQ_CMD_POP (1L<<30) +#define BNX2_TPAT_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_TPAT_FTQ_CTL 0x000853fc +#define BNX2_TPAT_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_TPAT_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_TPAT_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_TPAT_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_TPAT_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_TPAT_SCRATCH 0x000a0000 + + +/* + * rxp_reg definition + * offset: 0xc0000 + */ +#define BNX2_RXP_CPU_MODE 0x000c5000 +#define BNX2_RXP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_RXP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_RXP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_RXP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_RXP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_RXP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_RXP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_RXP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_RXP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_RXP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_RXP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_RXP_CPU_STATE 0x000c5004 +#define BNX2_RXP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_RXP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_RXP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_RXP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_RXP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_RXP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_RXP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_RXP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_RXP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_RXP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_RXP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_RXP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_RXP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_RXP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_RXP_CPU_EVENT_MASK 0x000c5008 +#define BNX2_RXP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_RXP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_RXP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_RXP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_RXP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_RXP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_RXP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_RXP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_RXP_CPU_PROGRAM_COUNTER 0x000c501c +#define BNX2_RXP_CPU_INSTRUCTION 0x000c5020 +#define BNX2_RXP_CPU_DATA_ACCESS 0x000c5024 +#define BNX2_RXP_CPU_INTERRUPT_ENABLE 0x000c5028 +#define BNX2_RXP_CPU_INTERRUPT_VECTOR 0x000c502c +#define BNX2_RXP_CPU_INTERRUPT_SAVED_PC 0x000c5030 +#define BNX2_RXP_CPU_HW_BREAKPOINT 0x000c5034 +#define BNX2_RXP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_RXP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK 0x000c5038 +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_RXP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR 0x000c5048 +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_RXP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_RXP_CPU_REG_FILE 0x000c5200 +#define BNX2_RXP_CFTQ_DATA 0x000c5380 +#define BNX2_RXP_CFTQ_CMD 0x000c53b8 +#define BNX2_RXP_CFTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_CFTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_CFTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_CFTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_CFTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_CFTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_CFTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_CFTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_CFTQ_CMD_POP (1L<<30) +#define BNX2_RXP_CFTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_CFTQ_CTL 0x000c53bc +#define BNX2_RXP_CFTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_CFTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_CFTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_CFTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_CFTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_FTQ_DATA 0x000c53c0 +#define BNX2_RXP_FTQ_CMD 0x000c53f8 +#define BNX2_RXP_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_RXP_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_RXP_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_RXP_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_RXP_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_RXP_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_RXP_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_RXP_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_RXP_FTQ_CMD_POP (1L<<30) +#define BNX2_RXP_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_RXP_FTQ_CTL 0x000c53fc +#define BNX2_RXP_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_RXP_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_RXP_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_RXP_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_RXP_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_RXP_SCRATCH 0x000e0000 + + +/* + * com_reg definition + * offset: 0x100000 + */ +#define BNX2_COM_CPU_MODE 0x00105000 +#define BNX2_COM_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_COM_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_COM_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_COM_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_COM_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_COM_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_COM_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_COM_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_COM_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_COM_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_COM_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_COM_CPU_STATE 0x00105004 +#define BNX2_COM_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_COM_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_COM_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_COM_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_COM_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_COM_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_COM_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_COM_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_COM_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_COM_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_COM_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_COM_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_COM_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_COM_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_COM_CPU_EVENT_MASK 0x00105008 +#define BNX2_COM_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_COM_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_COM_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_COM_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_COM_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_COM_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_COM_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_COM_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_COM_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_COM_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_COM_CPU_PROGRAM_COUNTER 0x0010501c +#define BNX2_COM_CPU_INSTRUCTION 0x00105020 +#define BNX2_COM_CPU_DATA_ACCESS 0x00105024 +#define BNX2_COM_CPU_INTERRUPT_ENABLE 0x00105028 +#define BNX2_COM_CPU_INTERRUPT_VECTOR 0x0010502c +#define BNX2_COM_CPU_INTERRUPT_SAVED_PC 0x00105030 +#define BNX2_COM_CPU_HW_BREAKPOINT 0x00105034 +#define BNX2_COM_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_COM_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_COM_CPU_DEBUG_VECT_PEEK 0x00105038 +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_COM_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_COM_CPU_LAST_BRANCH_ADDR 0x00105048 +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_COM_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_COM_CPU_REG_FILE 0x00105200 +#define BNX2_COM_COMXQ_FTQ_DATA 0x00105340 +#define BNX2_COM_COMXQ_FTQ_CMD 0x00105378 +#define BNX2_COM_COMXQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMXQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMXQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMXQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMXQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMXQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMXQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMXQ_FTQ_CTL 0x0010537c +#define BNX2_COM_COMXQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMXQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMXQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMXQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMXQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMTQ_FTQ_DATA 0x00105380 +#define BNX2_COM_COMTQ_FTQ_CMD 0x001053b8 +#define BNX2_COM_COMTQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMTQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMTQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMTQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMTQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMTQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMTQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMTQ_FTQ_CTL 0x001053bc +#define BNX2_COM_COMTQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMTQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMTQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMTQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMTQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_COMQ_FTQ_DATA 0x001053c0 +#define BNX2_COM_COMQ_FTQ_CMD 0x001053f8 +#define BNX2_COM_COMQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_COM_COMQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_COM_COMQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_COM_COMQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_COM_COMQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_COM_COMQ_FTQ_CMD_POP (1L<<30) +#define BNX2_COM_COMQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_COM_COMQ_FTQ_CTL 0x001053fc +#define BNX2_COM_COMQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_COM_COMQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_COM_COMQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_COM_COMQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_COM_COMQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_COM_SCRATCH 0x00120000 + + +/* + * cp_reg definition + * offset: 0x180000 + */ +#define BNX2_CP_CPU_MODE 0x00185000 +#define BNX2_CP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_CP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_CP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_CP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_CP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_CP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_CP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_CP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_CP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_CP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_CP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_CP_CPU_STATE 0x00185004 +#define BNX2_CP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_CP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_CP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_CP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_CP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_CP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_CP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_CP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_CP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_CP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_CP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_CP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_CP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_CP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_CP_CPU_EVENT_MASK 0x00185008 +#define BNX2_CP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_CP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_CP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_CP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_CP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_CP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_CP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_CP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_CP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_CP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_CP_CPU_PROGRAM_COUNTER 0x0018501c +#define BNX2_CP_CPU_INSTRUCTION 0x00185020 +#define BNX2_CP_CPU_DATA_ACCESS 0x00185024 +#define BNX2_CP_CPU_INTERRUPT_ENABLE 0x00185028 +#define BNX2_CP_CPU_INTERRUPT_VECTOR 0x0018502c +#define BNX2_CP_CPU_INTERRUPT_SAVED_PC 0x00185030 +#define BNX2_CP_CPU_HW_BREAKPOINT 0x00185034 +#define BNX2_CP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_CP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_CP_CPU_DEBUG_VECT_PEEK 0x00185038 +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_CP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_CP_CPU_LAST_BRANCH_ADDR 0x00185048 +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_CP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_CP_CPU_REG_FILE 0x00185200 +#define BNX2_CP_CPQ_FTQ_DATA 0x001853c0 +#define BNX2_CP_CPQ_FTQ_CMD 0x001853f8 +#define BNX2_CP_CPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_CP_CPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_CP_CPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_CP_CPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_CP_CPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_CP_CPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_CP_CPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_CP_CPQ_FTQ_CTL 0x001853fc +#define BNX2_CP_CPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_CP_CPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_CP_CPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_CP_CPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_CP_CPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_CP_SCRATCH 0x001a0000 + + +/* + * mcp_reg definition + * offset: 0x140000 + */ +#define BNX2_MCP_CPU_MODE 0x00145000 +#define BNX2_MCP_CPU_MODE_LOCAL_RST (1L<<0) +#define BNX2_MCP_CPU_MODE_STEP_ENA (1L<<1) +#define BNX2_MCP_CPU_MODE_PAGE_0_DATA_ENA (1L<<2) +#define BNX2_MCP_CPU_MODE_PAGE_0_INST_ENA (1L<<3) +#define BNX2_MCP_CPU_MODE_MSG_BIT1 (1L<<6) +#define BNX2_MCP_CPU_MODE_INTERRUPT_ENA (1L<<7) +#define BNX2_MCP_CPU_MODE_SOFT_HALT (1L<<10) +#define BNX2_MCP_CPU_MODE_BAD_DATA_HALT_ENA (1L<<11) +#define BNX2_MCP_CPU_MODE_BAD_INST_HALT_ENA (1L<<12) +#define BNX2_MCP_CPU_MODE_FIO_ABORT_HALT_ENA (1L<<13) +#define BNX2_MCP_CPU_MODE_SPAD_UNDERFLOW_HALT_ENA (1L<<15) + +#define BNX2_MCP_CPU_STATE 0x00145004 +#define BNX2_MCP_CPU_STATE_BREAKPOINT (1L<<0) +#define BNX2_MCP_CPU_STATE_BAD_INST_HALTED (1L<<2) +#define BNX2_MCP_CPU_STATE_PAGE_0_DATA_HALTED (1L<<3) +#define BNX2_MCP_CPU_STATE_PAGE_0_INST_HALTED (1L<<4) +#define BNX2_MCP_CPU_STATE_BAD_DATA_ADDR_HALTED (1L<<5) +#define BNX2_MCP_CPU_STATE_BAD_pc_HALTED (1L<<6) +#define BNX2_MCP_CPU_STATE_ALIGN_HALTED (1L<<7) +#define BNX2_MCP_CPU_STATE_FIO_ABORT_HALTED (1L<<8) +#define BNX2_MCP_CPU_STATE_SOFT_HALTED (1L<<10) +#define BNX2_MCP_CPU_STATE_SPAD_UNDERFLOW (1L<<11) +#define BNX2_MCP_CPU_STATE_INTERRRUPT (1L<<12) +#define BNX2_MCP_CPU_STATE_DATA_ACCESS_STALL (1L<<14) +#define BNX2_MCP_CPU_STATE_INST_FETCH_STALL (1L<<15) +#define BNX2_MCP_CPU_STATE_BLOCKED_READ (1L<<31) + +#define BNX2_MCP_CPU_EVENT_MASK 0x00145008 +#define BNX2_MCP_CPU_EVENT_MASK_BREAKPOINT_MASK (1L<<0) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_INST_HALTED_MASK (1L<<2) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_DATA_HALTED_MASK (1L<<3) +#define BNX2_MCP_CPU_EVENT_MASK_PAGE_0_INST_HALTED_MASK (1L<<4) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_DATA_ADDR_HALTED_MASK (1L<<5) +#define BNX2_MCP_CPU_EVENT_MASK_BAD_PC_HALTED_MASK (1L<<6) +#define BNX2_MCP_CPU_EVENT_MASK_ALIGN_HALTED_MASK (1L<<7) +#define BNX2_MCP_CPU_EVENT_MASK_FIO_ABORT_MASK (1L<<8) +#define BNX2_MCP_CPU_EVENT_MASK_SOFT_HALTED_MASK (1L<<10) +#define BNX2_MCP_CPU_EVENT_MASK_SPAD_UNDERFLOW_MASK (1L<<11) +#define BNX2_MCP_CPU_EVENT_MASK_INTERRUPT_MASK (1L<<12) + +#define BNX2_MCP_CPU_PROGRAM_COUNTER 0x0014501c +#define BNX2_MCP_CPU_INSTRUCTION 0x00145020 +#define BNX2_MCP_CPU_DATA_ACCESS 0x00145024 +#define BNX2_MCP_CPU_INTERRUPT_ENABLE 0x00145028 +#define BNX2_MCP_CPU_INTERRUPT_VECTOR 0x0014502c +#define BNX2_MCP_CPU_INTERRUPT_SAVED_PC 0x00145030 +#define BNX2_MCP_CPU_HW_BREAKPOINT 0x00145034 +#define BNX2_MCP_CPU_HW_BREAKPOINT_DISABLE (1L<<0) +#define BNX2_MCP_CPU_HW_BREAKPOINT_ADDRESS (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK 0x00145038 +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_VALUE (0x7ffL<<0) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_PEEK_EN (1L<<11) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_1_SEL (0xfL<<12) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_VALUE (0x7ffL<<16) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_PEEK_EN (1L<<27) +#define BNX2_MCP_CPU_DEBUG_VECT_PEEK_2_SEL (0xfL<<28) + +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR 0x00145048 +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_JUMP (0L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_TYPE_BRANCH (1L<<1) +#define BNX2_MCP_CPU_LAST_BRANCH_ADDR_LBA (0x3fffffffL<<2) + +#define BNX2_MCP_CPU_REG_FILE 0x00145200 +#define BNX2_MCP_MCPQ_FTQ_DATA 0x001453c0 +#define BNX2_MCP_MCPQ_FTQ_CMD 0x001453f8 +#define BNX2_MCP_MCPQ_FTQ_CMD_OFFSET (0x3ffL<<0) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_0 (0L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_WR_TOP_1 (1L<<10) +#define BNX2_MCP_MCPQ_FTQ_CMD_SFT_RESET (1L<<25) +#define BNX2_MCP_MCPQ_FTQ_CMD_RD_DATA (1L<<26) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_INTERVEN (1L<<27) +#define BNX2_MCP_MCPQ_FTQ_CMD_ADD_DATA (1L<<28) +#define BNX2_MCP_MCPQ_FTQ_CMD_INTERVENE_CLR (1L<<29) +#define BNX2_MCP_MCPQ_FTQ_CMD_POP (1L<<30) +#define BNX2_MCP_MCPQ_FTQ_CMD_BUSY (1L<<31) + +#define BNX2_MCP_MCPQ_FTQ_CTL 0x001453fc +#define BNX2_MCP_MCPQ_FTQ_CTL_INTERVENE (1L<<0) +#define BNX2_MCP_MCPQ_FTQ_CTL_OVERFLOW (1L<<1) +#define BNX2_MCP_MCPQ_FTQ_CTL_FORCE_INTERVENE (1L<<2) +#define BNX2_MCP_MCPQ_FTQ_CTL_MAX_DEPTH (0x3ffL<<12) +#define BNX2_MCP_MCPQ_FTQ_CTL_CUR_DEPTH (0x3ffL<<22) + +#define BNX2_MCP_ROM 0x00150000 +#define BNX2_MCP_SCRATCH 0x00160000 + + +#define NUM_MC_HASH_REGISTERS 8 + + +/* PHY_ID1: bits 31-16; PHY_ID2: bits 15-0. */ +#define PHY_BCM5706_PHY_ID 0x00206160 + +#define PHY_ID(id) ((id) & 0xfffffff0) +#define PHY_REV_ID(id) ((id) & 0xf) + +#define MIN_ETHERNET_PACKET_SIZE 60 +#define MAX_ETHERNET_PACKET_SIZE 1514 +#define MAX_ETHERNET_JUMBO_PACKET_SIZE 9014 + +#define RX_COPY_THRESH 92 + +#define DMA_READ_CHANS 5 +#define DMA_WRITE_CHANS 3 + +#define BCM_PAGE_BITS 12 +#define BCM_PAGE_SIZE (1 << BCM_PAGE_BITS) + +#define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct tx_bd)) +#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1) + +#define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct rx_bd)) +#define MAX_RX_DESC_CNT (RX_DESC_CNT - 1) + +#define NEXT_TX_BD(x) (((x) & (MAX_TX_DESC_CNT - 1)) == \ + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define TX_RING_IDX(x) ((x) & MAX_TX_DESC_CNT) + +#define NEXT_RX_BD(x) (((x) & (MAX_RX_DESC_CNT - 1)) == \ + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 2 : (x) + 1 + +#define RX_RING_IDX(x) ((x) & MAX_RX_DESC_CNT) + + +/* Context size. */ +#define CTX_SHIFT 7 +#define CTX_SIZE (1 << CTX_SHIFT) +#define CTX_MASK (CTX_SIZE - 1) +#define GET_CID_ADDR(_cid) ((_cid) << CTX_SHIFT) +#define GET_CID(_cid_addr) ((_cid_addr) >> CTX_SHIFT) + +#define PHY_CTX_SHIFT 6 +#define PHY_CTX_SIZE (1 << PHY_CTX_SHIFT) +#define PHY_CTX_MASK (PHY_CTX_SIZE - 1) +#define GET_PCID_ADDR(_pcid) ((_pcid) << PHY_CTX_SHIFT) +#define GET_PCID(_pcid_addr) ((_pcid_addr) >> PHY_CTX_SHIFT) + +#define MB_KERNEL_CTX_SHIFT 8 +#define MB_KERNEL_CTX_SIZE (1 << MB_KERNEL_CTX_SHIFT) +#define MB_KERNEL_CTX_MASK (MB_KERNEL_CTX_SIZE - 1) +#define MB_GET_CID_ADDR(_cid) (0x10000 + ((_cid) << MB_KERNEL_CTX_SHIFT)) + +#define MAX_CID_CNT 0x4000 +#define MAX_CID_ADDR (GET_CID_ADDR(MAX_CID_CNT)) +#define INVALID_CID_ADDR 0xffffffff + +#define TX_CID 16 +#define RX_CID 0 + +#define MB_TX_CID_ADDR MB_GET_CID_ADDR(TX_CID) +#define MB_RX_CID_ADDR MB_GET_CID_ADDR(RX_CID) + +struct sw_bd { + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapping) +}; + +/* Buffered flash (Atmel: AT45DB011B) specific information */ +#define SEEPROM_PAGE_BITS 2 +#define SEEPROM_PHY_PAGE_SIZE (1 << SEEPROM_PAGE_BITS) +#define SEEPROM_BYTE_ADDR_MASK (SEEPROM_PHY_PAGE_SIZE-1) +#define SEEPROM_PAGE_SIZE 4 +#define SEEPROM_TOTAL_SIZE 65536 + +#define BUFFERED_FLASH_PAGE_BITS 9 +#define BUFFERED_FLASH_PHY_PAGE_SIZE (1 << BUFFERED_FLASH_PAGE_BITS) +#define BUFFERED_FLASH_BYTE_ADDR_MASK (BUFFERED_FLASH_PHY_PAGE_SIZE-1) +#define BUFFERED_FLASH_PAGE_SIZE 264 +#define BUFFERED_FLASH_TOTAL_SIZE 131072 + +#define SAIFUN_FLASH_PAGE_BITS 8 +#define SAIFUN_FLASH_PHY_PAGE_SIZE (1 << SAIFUN_FLASH_PAGE_BITS) +#define SAIFUN_FLASH_BYTE_ADDR_MASK (SAIFUN_FLASH_PHY_PAGE_SIZE-1) +#define SAIFUN_FLASH_PAGE_SIZE 256 +#define SAIFUN_FLASH_BASE_TOTAL_SIZE 65536 + +#define NVRAM_TIMEOUT_COUNT 30000 + + +#define FLASH_STRAP_MASK (BNX2_NVM_CFG1_FLASH_MODE | \ + BNX2_NVM_CFG1_BUFFER_MODE | \ + BNX2_NVM_CFG1_PROTECT_MODE | \ + BNX2_NVM_CFG1_FLASH_SIZE) + +struct flash_spec { + u32 strapping; + u32 config1; + u32 config2; + u32 config3; + u32 write1; + u32 buffered; + u32 page_bits; + u32 page_size; + u32 addr_mask; + u32 total_size; + u8 *name; +}; + +struct bnx2 { + /* Fields used in the tx and intr/napi performance paths are grouped */ + /* together in the beginning of the structure. */ + void __iomem *regview; + + struct net_device *dev; + struct pci_dev *pdev; + + atomic_t intr_sem; + + struct status_block *status_blk; + u32 last_status_idx; + + atomic_t tx_avail_bd; + struct tx_bd *tx_desc_ring; + struct sw_bd *tx_buf_ring; + u32 tx_prod_bseq; + u16 tx_prod; + u16 tx_cons; + +#ifdef BCM_VLAN + struct vlan_group *vlgrp; +#endif + + u32 rx_offset; + u32 rx_buf_use_size; /* useable size */ + u32 rx_buf_size; /* with alignment */ + struct rx_bd *rx_desc_ring; + struct sw_bd *rx_buf_ring; + u32 rx_prod_bseq; + u16 rx_prod; + u16 rx_cons; + + u32 rx_csum; + + /* Only used to synchronize netif_stop_queue/wake_queue when tx */ + /* ring is full */ + spinlock_t tx_lock; + + /* End of fileds used in the performance code paths. */ + + char *name; + + int timer_interval; + struct timer_list timer; + struct work_struct reset_task; + + /* Used to synchronize phy accesses. */ + spinlock_t phy_lock; + + u32 flags; +#define PCIX_FLAG 1 +#define PCI_32BIT_FLAG 2 +#define ONE_TDMA_FLAG 4 /* no longer used */ +#define NO_WOL_FLAG 8 +#define USING_DAC_FLAG 0x10 +#define USING_MSI_FLAG 0x20 + + u32 phy_flags; +#define PHY_SERDES_FLAG 1 +#define PHY_CRC_FIX_FLAG 2 +#define PHY_PARALLEL_DETECT_FLAG 4 +#define PHY_INT_MODE_MASK_FLAG 0x300 +#define PHY_INT_MODE_AUTO_POLLING_FLAG 0x100 +#define PHY_INT_MODE_LINK_READY_FLAG 0x200 + + u32 chip_id; + /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */ +#define CHIP_NUM(bp) (((bp)->chip_id) & 0xffff0000) +#define CHIP_NUM_5706 0x57060000 + +#define CHIP_REV(bp) (((bp)->chip_id) & 0x0000f000) +#define CHIP_REV_Ax 0x00000000 +#define CHIP_REV_Bx 0x00001000 +#define CHIP_REV_Cx 0x00002000 + +#define CHIP_METAL(bp) (((bp)->chip_id) & 0x00000ff0) +#define CHIP_BONDING(bp) (((bp)->chip_id) & 0x0000000f) + +#define CHIP_ID(bp) (((bp)->chip_id) & 0xfffffff0) +#define CHIP_ID_5706_A0 0x57060000 +#define CHIP_ID_5706_A1 0x57060010 + +#define CHIP_BOND_ID(bp) (((bp)->chip_id) & 0xf) + +/* A serdes chip will have the first bit of the bond id set. */ +#define CHIP_BOND_ID_SERDES_BIT 0x01 + + u32 phy_addr; + u32 phy_id; + + u16 bus_speed_mhz; + u8 wol; + + u8 fw_timed_out; + + u16 fw_wr_seq; + u16 fw_drv_pulse_wr_seq; + + int tx_ring_size; + dma_addr_t tx_desc_mapping; + + + int rx_ring_size; + dma_addr_t rx_desc_mapping; + + u16 tx_quick_cons_trip; + u16 tx_quick_cons_trip_int; + u16 rx_quick_cons_trip; + u16 rx_quick_cons_trip_int; + u16 comp_prod_trip; + u16 comp_prod_trip_int; + u16 tx_ticks; + u16 tx_ticks_int; + u16 com_ticks; + u16 com_ticks_int; + u16 cmd_ticks; + u16 cmd_ticks_int; + u16 rx_ticks; + u16 rx_ticks_int; + + u32 stats_ticks; + + dma_addr_t status_blk_mapping; + + struct statistics_block *stats_blk; + dma_addr_t stats_blk_mapping; + + u32 rx_mode; + + u16 req_line_speed; + u8 req_duplex; + + u8 link_up; + + u16 line_speed; + u8 duplex; + u8 flow_ctrl; /* actual flow ctrl settings */ + /* may be different from */ + /* req_flow_ctrl if autoneg */ +#define FLOW_CTRL_TX 1 +#define FLOW_CTRL_RX 2 + + u32 advertising; + + u8 req_flow_ctrl; /* flow ctrl advertisement */ + /* settings or forced */ + /* settings */ + u8 autoneg; +#define AUTONEG_SPEED 1 +#define AUTONEG_FLOW_CTRL 2 + + u8 loopback; +#define MAC_LOOPBACK 1 +#define PHY_LOOPBACK 2 + + u8 serdes_an_pending; +#define SERDES_AN_TIMEOUT (2 * HZ) + + u8 mac_addr[8]; + + u32 fw_ver; + + int pm_cap; + int pcix_cap; + + struct net_device_stats net_stats; + + struct flash_spec *flash_info; +}; + +static u32 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset); +static void bnx2_reg_wr_ind(struct bnx2 *bp, u32 offset, u32 val); + +#define REG_RD(bp, offset) \ + readl(bp->regview + offset) + +#define REG_WR(bp, offset, val) \ + writel(val, bp->regview + offset) + +#define REG_WR16(bp, offset, val) \ + writew(val, bp->regview + offset) + +#define REG_RD_IND(bp, offset) \ + bnx2_reg_rd_ind(bp, offset) + +#define REG_WR_IND(bp, offset, val) \ + bnx2_reg_wr_ind(bp, offset, val) + +/* Indirect context access. Unlike the MBQ_WR, these macros will not + * trigger a chip event. */ +static void bnx2_ctx_wr(struct bnx2 *bp, u32 cid_addr, u32 offset, u32 val); + +#define CTX_WR(bp, cid_addr, offset, val) \ + bnx2_ctx_wr(bp, cid_addr, offset, val) + +struct cpu_reg { + u32 mode; + u32 mode_value_halt; + u32 mode_value_sstep; + + u32 state; + u32 state_value_clear; + + u32 gpr0; + u32 evmask; + u32 pc; + u32 inst; + u32 bp; + + u32 spad_base; + + u32 mips_view_base; +}; + +struct fw_info { + u32 ver_major; + u32 ver_minor; + u32 ver_fix; + + u32 start_addr; + + /* Text section. */ + u32 text_addr; + u32 text_len; + u32 text_index; + u32 *text; + + /* Data section. */ + u32 data_addr; + u32 data_len; + u32 data_index; + u32 *data; + + /* SBSS section. */ + u32 sbss_addr; + u32 sbss_len; + u32 sbss_index; + u32 *sbss; + + /* BSS section. */ + u32 bss_addr; + u32 bss_len; + u32 bss_index; + u32 *bss; + + /* Read-only section. */ + u32 rodata_addr; + u32 rodata_len; + u32 rodata_index; + u32 *rodata; +}; + +#define RV2P_PROC1 0 +#define RV2P_PROC2 1 + + +/* This value (in milliseconds) determines the frequency of the driver + * issuing the PULSE message code. The firmware monitors this periodic + * pulse to determine when to switch to an OS-absent mode. */ +#define DRV_PULSE_PERIOD_MS 250 + +/* This value (in milliseconds) determines how long the driver should + * wait for an acknowledgement from the firmware before timing out. Once + * the firmware has timed out, the driver will assume there is no firmware + * running and there won't be any firmware-driver synchronization during a + * driver reset. */ +#define FW_ACK_TIME_OUT_MS 50 + + +#define BNX2_DRV_RESET_SIGNATURE 0x00000000 +#define BNX2_DRV_RESET_SIGNATURE_MAGIC 0x4841564b /* HAVK */ +//#define DRV_RESET_SIGNATURE_MAGIC 0x47495352 /* RSIG */ + +#define BNX2_DRV_MB 0x00000004 +#define BNX2_DRV_MSG_CODE 0xff000000 +#define BNX2_DRV_MSG_CODE_RESET 0x01000000 +#define BNX2_DRV_MSG_CODE_UNLOAD 0x02000000 +#define BNX2_DRV_MSG_CODE_SHUTDOWN 0x03000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_WOL 0x04000000 +#define BNX2_DRV_MSG_CODE_FW_TIMEOUT 0x05000000 +#define BNX2_DRV_MSG_CODE_PULSE 0x06000000 +#define BNX2_DRV_MSG_CODE_DIAG 0x07000000 +#define BNX2_DRV_MSG_CODE_SUSPEND_NO_WOL 0x09000000 + +#define BNX2_DRV_MSG_DATA 0x00ff0000 +#define BNX2_DRV_MSG_DATA_WAIT0 0x00010000 +#define BNX2_DRV_MSG_DATA_WAIT1 0x00020000 +#define BNX2_DRV_MSG_DATA_WAIT2 0x00030000 +#define BNX2_DRV_MSG_DATA_WAIT3 0x00040000 + +#define BNX2_DRV_MSG_SEQ 0x0000ffff + +#define BNX2_FW_MB 0x00000008 +#define BNX2_FW_MSG_ACK 0x0000ffff +#define BNX2_FW_MSG_STATUS_MASK 0x00ff0000 +#define BNX2_FW_MSG_STATUS_OK 0x00000000 +#define BNX2_FW_MSG_STATUS_FAILURE 0x00ff0000 + +#define BNX2_LINK_STATUS 0x0000000c + +#define BNX2_DRV_PULSE_MB 0x00000010 +#define BNX2_DRV_PULSE_SEQ_MASK 0x0000ffff + +/* Indicate to the firmware not to go into the + * OS absent when it is not getting driver pulse. + * This is used for debugging. */ +#define BNX2_DRV_MSG_DATA_PULSE_CODE_ALWAYS_ALIVE 0x00010000 + +#define BNX2_DEV_INFO_SIGNATURE 0x00000020 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC 0x44564900 +#define BNX2_DEV_INFO_SIGNATURE_MAGIC_MASK 0xffffff00 +#define BNX2_DEV_INFO_FEATURE_CFG_VALID 0x01 +#define BNX2_DEV_INFO_SECONDARY_PORT 0x80 +#define BNX2_DEV_INFO_DRV_ALWAYS_ALIVE 0x40 + +#define BNX2_SHARED_HW_CFG_PART_NUM 0x00000024 + +#define BNX2_SHARED_HW_CFG_POWER_DISSIPATED 0x00000034 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D3_MASK 0xff000000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D2_MASK 0xff0000 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D1_MASK 0xff00 +#define BNX2_SHARED_HW_CFG_POWER_STATE_D0_MASK 0xff + +#define BNX2_SHARED_HW_CFG POWER_CONSUMED 0x00000038 +#define BNX2_SHARED_HW_CFG_CONFIG 0x0000003c +#define BNX2_SHARED_HW_CFG_DESIGN_NIC 0 +#define BNX2_SHARED_HW_CFG_DESIGN_LOM 0x1 +#define BNX2_SHARED_HW_CFG_PHY_COPPER 0 +#define BNX2_SHARED_HW_CFG_PHY_FIBER 0x2 +#define BNX2_SHARED_HW_CFG_LED_MODE_SHIFT_BITS 8 +#define BNX2_SHARED_HW_CFG_LED_MODE_MASK 0x300 +#define BNX2_SHARED_HW_CFG_LED_MODE_MAC 0 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY1 0x100 +#define BNX2_SHARED_HW_CFG_LED_MODE_GPHY2 0x200 + +#define BNX2_DEV_INFO_BC_REV 0x0000004c + +#define BNX2_PORT_HW_CFG_MAC_UPPER 0x00000050 +#define BNX2_PORT_HW_CFG_UPPERMAC_MASK 0xffff + +#define BNX2_PORT_HW_CFG_MAC_LOWER 0x00000054 +#define BNX2_PORT_HW_CFG_CONFIG 0x00000058 + +#define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER 0x00000068 +#define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER 0x0000006c +#define BNX2_PORT_HW_CFG_IMD_MAC_B_UPPER 0x00000070 +#define BNX2_PORT_HW_CFG_IMD_MAC_B_LOWER 0x00000074 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_UPPER 0x00000078 +#define BNX2_PORT_HW_CFG_ISCSI_MAC_LOWER 0x0000007c + +#define BNX2_DEV_INFO_PER_PORT_HW_CONFIG2 0x000000b4 + +#define BNX2_DEV_INFO_FORMAT_REV 0x000000c4 +#define BNX2_DEV_INFO_FORMAT_REV_MASK 0xff000000 +#define BNX2_DEV_INFO_FORMAT_REV_ID ('A' << 24) + +#define BNX2_SHARED_FEATURE 0x000000c8 +#define BNX2_SHARED_FEATURE_MASK 0xffffffff + +#define BNX2_PORT_FEATURE 0x000000d8 +#define BNX2_PORT2_FEATURE 0x00000014c +#define BNX2_PORT_FEATURE_WOL_ENABLED 0x01000000 +#define BNX2_PORT_FEATURE_MBA_ENABLED 0x02000000 +#define BNX2_PORT_FEATURE_ASF_ENABLED 0x04000000 +#define BNX2_PORT_FEATURE_IMD_ENABLED 0x08000000 +#define BNX2_PORT_FEATURE_BAR1_SIZE_MASK 0xf +#define BNX2_PORT_FEATURE_BAR1_SIZE_DISABLED 0x0 +#define BNX2_PORT_FEATURE_BAR1_SIZE_64K 0x1 +#define BNX2_PORT_FEATURE_BAR1_SIZE_128K 0x2 +#define BNX2_PORT_FEATURE_BAR1_SIZE_256K 0x3 +#define BNX2_PORT_FEATURE_BAR1_SIZE_512K 0x4 +#define BNX2_PORT_FEATURE_BAR1_SIZE_1M 0x5 +#define BNX2_PORT_FEATURE_BAR1_SIZE_2M 0x6 +#define BNX2_PORT_FEATURE_BAR1_SIZE_4M 0x7 +#define BNX2_PORT_FEATURE_BAR1_SIZE_8M 0x8 +#define BNX2_PORT_FEATURE_BAR1_SIZE_16M 0x9 +#define BNX2_PORT_FEATURE_BAR1_SIZE_32M 0xa +#define BNX2_PORT_FEATURE_BAR1_SIZE_64M 0xb +#define BNX2_PORT_FEATURE_BAR1_SIZE_128M 0xc +#define BNX2_PORT_FEATURE_BAR1_SIZE_256M 0xd +#define BNX2_PORT_FEATURE_BAR1_SIZE_512M 0xe +#define BNX2_PORT_FEATURE_BAR1_SIZE_1G 0xf + +#define BNX2_PORT_FEATURE_WOL 0xdc +#define BNX2_PORT2_FEATURE_WOL 0x150 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_SHIFT_BITS 4 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MASK 0x30 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_DISABLE 0 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC 0x10 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_ACPI 0x20 +#define BNX2_PORT_FEATURE_WOL_DEFAULT_MAGIC_AND_ACPI 0x30 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_MASK 0xf +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10HALF 1 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_10FULL 2 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100HALF 3 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_100FULL 4 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000HALF 5 +#define BNX2_PORT_FEATURE_WOL_LINK_SPEED_1000FULL 6 +#define BNX2_PORT_FEATURE_WOL_AUTONEG_ADVERTISE_1000 0x40 +#define BNX2_PORT_FEATURE_WOL_RESERVED_PAUSE_CAP 0x400 +#define BNX2_PORT_FEATURE_WOL_RESERVED_ASYM_PAUSE_CAP 0x800 + +#define BNX2_PORT_FEATURE_MBA 0xe0 +#define BNX2_PORT2_FEATURE_MBA 0x154 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_SHIFT_BITS 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_MASK 0x3 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_PXE 0 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_RPL 1 +#define BNX2_PORT_FEATURE_MBA_BOOT_AGENT_TYPE_BOOTP 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_SHIFT_BITS 2 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_MASK 0x3c +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_AUTONEG 0 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10HALF 0x4 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_10FULL 0x8 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100HALF 0xc +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_100FULL 0x10 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000HALF 0x14 +#define BNX2_PORT_FEATURE_MBA_LINK_SPEED_1000FULL 0x18 +#define BNX2_PORT_FEATURE_MBA_SETUP_PROMPT_ENABLE 0x40 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_S 0 +#define BNX2_PORT_FEATURE_MBA_HOTKEY_CTRL_B 0x80 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_SHIFT_BITS 8 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_MASK 0xff00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_DISABLED 0 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1K 0x100 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2K 0x200 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4K 0x300 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8K 0x400 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16K 0x500 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_32K 0x600 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_64K 0x700 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_128K 0x800 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_256K 0x900 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_512K 0xa00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_1M 0xb00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_2M 0xc00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_4M 0xd00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_8M 0xe00 +#define BNX2_PORT_FEATURE_MBA_EXP_ROM_SIZE_16M 0xf00 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_SHIFT_BITS 16 +#define BNX2_PORT_FEATURE_MBA_MSG_TIMEOUT_MASK 0xf0000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_SHIFT_BITS 20 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_MASK 0x300000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_AUTO 0 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_BBS 0x100000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT18H 0x200000 +#define BNX2_PORT_FEATURE_MBA_BIOS_BOOTSTRAP_INT19H 0x300000 + +#define BNX2_PORT_FEATURE_IMD 0xe4 +#define BNX2_PORT2_FEATURE_IMD 0x158 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_DEFAULT 0 +#define BNX2_PORT_FEATURE_IMD_LINK_OVERRIDE_ENABLE 1 + +#define BNX2_PORT_FEATURE_VLAN 0xe8 +#define BNX2_PORT2_FEATURE_VLAN 0x15c +#define BNX2_PORT_FEATURE_MBA_VLAN_TAG_MASK 0xffff +#define BNX2_PORT_FEATURE_MBA_VLAN_ENABLE 0x10000 + +#define BNX2_BC_STATE_RESET_TYPE 0x000001c0 +#define BNX2_BC_STATE_RESET_TYPE_SIG 0x00005254 +#define BNX2_BC_STATE_RESET_TYPE_SIG_MASK 0x0000ffff +#define BNX2_BC_STATE_RESET_TYPE_NONE (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00010000) +#define BNX2_BC_STATE_RESET_TYPE_PCI (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00020000) +#define BNX2_BC_STATE_RESET_TYPE_VAUX (BNX2_BC_STATE_RESET_TYPE_SIG | \ + 0x00030000) +#define BNX2_BC_STATE_RESET_TYPE_DRV_MASK DRV_MSG_CODE +#define BNX2_BC_STATE_RESET_TYPE_DRV_RESET (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_RESET) +#define BNX2_BC_STATE_RESET_TYPE_DRV_UNLOAD (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_UNLOAD) +#define BNX2_BC_STATE_RESET_TYPE_DRV_SHUTDOWN (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_SHUTDOWN) +#define BNX2_BC_STATE_RESET_TYPE_DRV_WOL (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_WOL) +#define BNX2_BC_STATE_RESET_TYPE_DRV_DIAG (BNX2_BC_STATE_RESET_TYPE_SIG | \ + DRV_MSG_CODE_DIAG) +#define BNX2_BC_STATE_RESET_TYPE_VALUE(msg) (BNX2_BC_STATE_RESET_TYPE_SIG | \ + (msg)) + +#define BNX2_BC_STATE 0x000001c4 +#define BNX2_BC_STATE_ERR_MASK 0x0000ff00 +#define BNX2_BC_STATE_SIGN 0x42530000 +#define BNX2_BC_STATE_SIGN_MASK 0xffff0000 +#define BNX2_BC_STATE_BC1_START (BNX2_BC_STATE_SIGN | 0x1) +#define BNX2_BC_STATE_GET_NVM_CFG1 (BNX2_BC_STATE_SIGN | 0x2) +#define BNX2_BC_STATE_PROG_BAR (BNX2_BC_STATE_SIGN | 0x3) +#define BNX2_BC_STATE_INIT_VID (BNX2_BC_STATE_SIGN | 0x4) +#define BNX2_BC_STATE_GET_NVM_CFG2 (BNX2_BC_STATE_SIGN | 0x5) +#define BNX2_BC_STATE_APPLY_WKARND (BNX2_BC_STATE_SIGN | 0x6) +#define BNX2_BC_STATE_LOAD_BC2 (BNX2_BC_STATE_SIGN | 0x7) +#define BNX2_BC_STATE_GOING_BC2 (BNX2_BC_STATE_SIGN | 0x8) +#define BNX2_BC_STATE_GOING_DIAG (BNX2_BC_STATE_SIGN | 0x9) +#define BNX2_BC_STATE_RT_FINAL_INIT (BNX2_BC_STATE_SIGN | 0x81) +#define BNX2_BC_STATE_RT_WKARND (BNX2_BC_STATE_SIGN | 0x82) +#define BNX2_BC_STATE_RT_DRV_PULSE (BNX2_BC_STATE_SIGN | 0x83) +#define BNX2_BC_STATE_RT_FIOEVTS (BNX2_BC_STATE_SIGN | 0x84) +#define BNX2_BC_STATE_RT_DRV_CMD (BNX2_BC_STATE_SIGN | 0x85) +#define BNX2_BC_STATE_RT_LOW_POWER (BNX2_BC_STATE_SIGN | 0x86) +#define BNX2_BC_STATE_RT_SET_WOL (BNX2_BC_STATE_SIGN | 0x87) +#define BNX2_BC_STATE_RT_OTHER_FW (BNX2_BC_STATE_SIGN | 0x88) +#define BNX2_BC_STATE_RT_GOING_D3 (BNX2_BC_STATE_SIGN | 0x89) +#define BNX2_BC_STATE_ERR_BAD_VERSION (BNX2_BC_STATE_SIGN | 0x0100) +#define BNX2_BC_STATE_ERR_BAD_BC2_CRC (BNX2_BC_STATE_SIGN | 0x0200) +#define BNX2_BC_STATE_ERR_BC1_LOOP (BNX2_BC_STATE_SIGN | 0x0300) +#define BNX2_BC_STATE_ERR_UNKNOWN_CMD (BNX2_BC_STATE_SIGN | 0x0400) +#define BNX2_BC_STATE_ERR_DRV_DEAD (BNX2_BC_STATE_SIGN | 0x0500) +#define BNX2_BC_STATE_ERR_NO_RXP (BNX2_BC_STATE_SIGN | 0x0600) +#define BNX2_BC_STATE_ERR_TOO_MANY_RBUF (BNX2_BC_STATE_SIGN | 0x0700) + +#define BNX2_BC_STATE_DEBUG_CMD 0x1dc +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE 0x42440000 +#define BNX2_BC_STATE_BC_DBG_CMD_SIGNATURE_MASK 0xffff0000 +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_CNT_MASK 0xffff +#define BNX2_BC_STATE_BC_DBG_CMD_LOOP_INFINITE 0xffff + +#define HOST_VIEW_SHMEM_BASE 0x167c00 + +#endif diff --git a/drivers/net/bnx2_fw.h b/drivers/net/bnx2_fw.h new file mode 100644 index 00000000000..35f3a2ae5ef --- /dev/null +++ b/drivers/net/bnx2_fw.h @@ -0,0 +1,2468 @@ +/* bnx2_fw.h: Broadcom NX2 network driver. + * + * Copyright (c) 2004, 2005 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, except as noted below. + * + * This file contains firmware data derived from proprietary unpublished + * source code, Copyright (c) 2004, 2005 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware data + * in hexadecimal or equivalent format, provided this copyright notice is + * accompanying it. + */ + + +static int bnx2_COM_b06FwReleaseMajor = 0x0; +static int bnx2_COM_b06FwReleaseMinor = 0x0; +static int bnx2_COM_b06FwReleaseFix = 0x0; +static u32 bnx2_COM_b06FwStartAddr = 0x080004a0; +static u32 bnx2_COM_b06FwTextAddr = 0x08000000; +static int bnx2_COM_b06FwTextLen = 0x4594; +static u32 bnx2_COM_b06FwDataAddr = 0x080045e0; +static int bnx2_COM_b06FwDataLen = 0x0; +static u32 bnx2_COM_b06FwRodataAddr = 0x08004598; +static int bnx2_COM_b06FwRodataLen = 0x18; +static u32 bnx2_COM_b06FwBssAddr = 0x08004600; +static int bnx2_COM_b06FwBssLen = 0x88; +static u32 bnx2_COM_b06FwSbssAddr = 0x080045e0; +static int bnx2_COM_b06FwSbssLen = 0x1c; +static u32 bnx2_COM_b06FwText[(0x4594/4) + 1] = { + 0x0a000128, 0x00000000, 0x00000000, 0x0000000d, 0x636f6d20, 0x302e362e, + 0x39000000, 0x00060902, 0x00000000, 0x00000003, 0x00000014, 0x00000032, + 0x00000003, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000010, 0x000003e8, 0x0000ea60, 0x00000001, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x0000ffff, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000002, 0x00000020, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x244245e0, 0x3c030800, 0x24634688, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x261004a0, 0x3c1c0800, 0x279c45e0, 0x0e0001f2, 0x00000000, + 0x0000000d, 0x27bdffe8, 0x3c1a8000, 0x3c020008, 0x0342d825, 0x3c036010, + 0xafbf0010, 0x8c655000, 0x3c020800, 0x24470ac8, 0x3c040800, 0x24864600, + 0x2402ff7f, 0x00a22824, 0x34a5380c, 0xac655000, 0x00002821, 0x24020037, + 0x24030c80, 0xaf420008, 0xaf430024, 0xacc70000, 0x24a50001, 0x2ca20016, + 0x1440fffc, 0x24c60004, 0x24844600, 0x3c020800, 0x24420ad4, 0x3c030800, + 0x246309d4, 0xac820004, 0x3c020800, 0x24420618, 0x3c050800, 0x24a50ca0, + 0xac82000c, 0x3c020800, 0x24423100, 0xac830008, 0x3c030800, 0x246325c8, + 0xac820014, 0x3c020800, 0x24422b0c, 0xac830018, 0xac83001c, 0x3c030800, + 0x24630adc, 0xac820024, 0x3c020800, 0x24423040, 0xac83002c, 0x3c030800, + 0x24633060, 0xac820030, 0x3c020800, 0x24422f6c, 0xac830034, 0x3c030800, + 0x24632c60, 0xac82003c, 0x3c020800, 0x24420b6c, 0xac850010, 0xac850020, + 0xac830040, 0x0e000bd6, 0xac820050, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, 0x9203000b, + 0x24020003, 0x1462005b, 0x96110008, 0x32220001, 0x10400009, 0x27430080, + 0x8e020000, 0x96040014, 0x000211c2, 0x00021040, 0x00621821, 0xa4640000, + 0x0a0001cb, 0x3c020800, 0x3c020800, 0x8c430020, 0x1060002a, 0x3c030800, + 0x0e001006, 0x00000000, 0x97420108, 0x8f850018, 0x9743010c, 0x3042003e, + 0x00021400, 0x00621825, 0xaca30000, 0x8f840018, 0x8f420100, 0xac820004, + 0x97430116, 0x9742010e, 0x8f840018, 0x00031c00, 0x00431025, 0xac820008, + 0x97430110, 0x97440112, 0x8f850018, 0x00031c00, 0x00832025, 0xaca4000c, + 0x97420114, 0x8f840018, 0x3042ffff, 0xac820010, 0x8f830018, 0xac600014, + 0x8f820018, 0x3c030800, 0xac400018, 0x9462466e, 0x8f840018, 0x3c032000, + 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x3c030800, 0x8c620040, + 0x24420001, 0xac620040, 0x3c020800, 0x8c430044, 0x32240004, 0x24630001, + 0x10800017, 0xac430044, 0x8f4202b8, 0x04430007, 0x8e020020, 0x3c040800, + 0x8c830060, 0x24020001, 0x24630001, 0x0a0001ed, 0xac830060, 0x3c060800, + 0x8cc4005c, 0xaf420280, 0x96030016, 0x00001021, 0xa7430284, 0x8e050004, + 0x24840001, 0x3c031000, 0xaf450288, 0xaf4302b8, 0x0a0001ed, 0xacc4005c, + 0x32220002, 0x0a0001ed, 0x0002102b, 0x3c026000, 0xac400808, 0x0000000d, + 0x00001021, 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, + 0x27bdffc8, 0xafbf0034, 0xafbe0030, 0xafb7002c, 0xafb60028, 0xafb50024, + 0xafb40020, 0xafb3001c, 0xafb20018, 0xafb10014, 0x0e00013f, 0xafb00010, + 0x24110020, 0x24150030, 0x2794000c, 0x27930008, 0x3c124000, 0x3c1e0800, + 0x3c170800, 0x3c160800, 0x8f820004, 0x3c040800, 0x8c830020, 0x10430004, + 0x00000000, 0xaf830004, 0x0e00110b, 0x00000000, 0x8f500000, 0x32020007, + 0x1040fff5, 0x32020001, 0x1040002b, 0x32020002, 0x8f420100, 0xaf420020, + 0x8f430104, 0xaf4300a8, 0x9342010b, 0x93630000, 0x306300ff, 0x10710005, + 0x304400ff, 0x10750006, 0x2c820016, 0x0a000227, 0x00000000, 0xaf940000, + 0x0a000228, 0x2c820016, 0xaf930000, 0x0a000228, 0x00000000, 0xaf800000, + 0x14400005, 0x00041880, 0x0e0002b2, 0x00000000, 0x0a000234, 0x00000000, + 0x3c020800, 0x24424600, 0x00621821, 0x8c620000, 0x0040f809, 0x00000000, + 0x10400005, 0x8fc20034, 0x8f420104, 0x3c016020, 0xac220014, 0x8fc20034, + 0xaf520138, 0x24420001, 0xafc20034, 0x32020002, 0x10400019, 0x32020004, + 0x8f420140, 0xaf420020, 0x93630000, 0x306300ff, 0x10710005, 0x00000000, + 0x10750006, 0x00000000, 0x0a000250, 0x00000000, 0xaf940000, 0x0a000251, + 0x00000000, 0xaf930000, 0x0a000251, 0x00000000, 0xaf800000, 0x0e0008b9, + 0x00000000, 0x8ee20038, 0xaf520178, 0x24420001, 0xaee20038, 0x32020004, + 0x1040ffad, 0x00000000, 0x8f420180, 0xaf420020, 0x93630000, 0x306300ff, + 0x10710005, 0x00000000, 0x10750006, 0x00000000, 0x0a00026a, 0x00000000, + 0xaf940000, 0x0a00026b, 0x00000000, 0xaf930000, 0x0a00026b, 0x00000000, + 0xaf800000, 0x93620000, 0x14510004, 0x8ec2003c, 0x0e000835, 0x00000000, + 0x8ec2003c, 0xaf5201b8, 0x24420001, 0x0a000206, 0xaec2003c, 0x27bdffe8, + 0xafbf0010, 0x97420108, 0x24033000, 0x30447000, 0x10830012, 0x28823001, + 0x10400007, 0x24024000, 0x1080000b, 0x24022000, 0x1082001a, 0x24020001, + 0x0a000299, 0x00000000, 0x1082000c, 0x24025000, 0x1082000e, 0x00000000, + 0x0a000299, 0x00000000, 0x0000000d, 0x0a00029b, 0x00001021, 0x0e000300, + 0x00000000, 0x0a00029b, 0x00001021, 0x0e00048f, 0x00000000, 0x0a00029b, + 0x00001021, 0x0e000fdf, 0x00000000, 0x0a00029b, 0x00001021, 0x0000000d, + 0x00001021, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x93620000, 0x24030020, + 0x304400ff, 0x10830005, 0x24020030, 0x10820007, 0x00000000, 0x0a0002af, + 0x00000000, 0x2782000c, 0xaf820000, 0x03e00008, 0x00000000, 0x27820008, + 0xaf820000, 0x03e00008, 0x00000000, 0xaf800000, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00001021, 0x03e00008, 0x00001021, 0x27440100, + 0x94830008, 0x30620004, 0x10400017, 0x30620002, 0x8f4202b8, 0x04430007, + 0x8c820020, 0x3c040800, 0x8c830060, 0x24020001, 0x24630001, 0x03e00008, + 0xac830060, 0xaf420280, 0x94830016, 0x3c060800, 0xa7430284, 0x8c850004, + 0x8cc4005c, 0x00001021, 0x3c031000, 0x24840001, 0xaf450288, 0xaf4302b8, + 0x03e00008, 0xacc4005c, 0x14400003, 0x3c040800, 0x03e00008, 0x00001021, + 0x8c830084, 0x24020001, 0x24630001, 0x03e00008, 0xac830084, 0x27450100, + 0x3c040800, 0x8c820088, 0x94a3000c, 0x24420001, 0x007a1821, 0xac820088, + 0x8ca40018, 0x90664000, 0xaf440038, 0x8ca2001c, 0x2403fff8, 0x00063600, + 0x00431024, 0x34420004, 0x3c030005, 0xaf42003c, 0xaf430030, 0x00000000, + 0x00000000, 0x00000000, 0xaf460404, 0x00000000, 0x00000000, 0x00000000, + 0x3c020006, 0x34420001, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, + 0x8f420000, 0x30420010, 0x1040fffd, 0x00001021, 0x03e00008, 0x00000000, + 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x1060001e, + 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020018, 0xac620000, + 0x8f840018, 0x9602000c, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, + 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, + 0x3c026000, 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, + 0x8f850018, 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffc8, 0xafb3001c, + 0x00009821, 0xafb7002c, 0x0000b821, 0xafbe0030, 0x0000f021, 0xafb50024, + 0x27550100, 0xafbf0034, 0xafb60028, 0xafb40020, 0xafb20018, 0xafb10014, + 0xafb00010, 0x96a20008, 0x8f540100, 0x8eb20018, 0x30420001, 0x10400037, + 0x02a0b021, 0x8f630054, 0x2642ffff, 0x00431023, 0x18400006, 0x00000000, + 0x0000000d, 0x00000000, 0x24000128, 0x0a000372, 0x00002021, 0x8f62004c, + 0x02421023, 0x18400028, 0x00002021, 0x93650120, 0x93640121, 0x3c030800, + 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, 0x00803821, 0x1485000b, + 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, 0xac830090, 0x93620122, + 0x30420001, 0x00021023, 0x30420005, 0x0a000372, 0x34440004, 0x27660100, + 0x00041080, 0x00c21021, 0x8c430000, 0x02431823, 0x04600004, 0x24820001, + 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, 0x3c030800, 0xa3640121, + 0x8c620094, 0x24040005, 0x24420001, 0x0a000372, 0xac620094, 0x24040004, + 0x00809821, 0x9362003f, 0x304400ff, 0x38830016, 0x2c630001, 0x38820010, + 0x2c420001, 0x00621825, 0x1460000c, 0x24020001, 0x38830008, 0x2c630001, + 0x38820014, 0x2c420001, 0x00621825, 0x14600005, 0x24020001, 0x24020012, + 0x14820002, 0x00001021, 0x24020001, 0x50400007, 0x8eb10020, 0x8ea20020, + 0x8f630040, 0x00408821, 0x00431023, 0x5c400001, 0x8f710040, 0x9343010b, + 0x24020004, 0x54620005, 0x36730080, 0x96a20008, 0x36730002, 0x24170001, + 0x305e0020, 0x2402fffb, 0x02628024, 0x1200002a, 0x3c030800, 0x8c620030, + 0x02021024, 0x10400026, 0x3c020800, 0x8c430020, 0x10600024, 0x32620004, + 0x0e001006, 0x00000000, 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, + 0x02201821, 0x32620002, 0xac900004, 0x8f840018, 0x50400001, 0x8ec30014, + 0xac830008, 0x8f830018, 0x8ec20020, 0xac62000c, 0x8f840018, 0x8f620040, + 0xac820010, 0x8f830018, 0x8ec20018, 0xac620014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024010, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x32620004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02821025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf720064, 0x3c023fff, 0x0a0003f1, + 0x3442ffff, 0x8f62005c, 0x02421023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf720064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02451021, 0x3c053fff, 0x34a5ffff, + 0x02451021, 0xaf62005c, 0x24070001, 0xaf72004c, 0x8f620054, 0x16420005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02821025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02821025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5401c0, 0xa34201c4, 0xaf4301f8, 0x8ea30014, 0x8f620040, + 0x14430003, 0x00431023, 0x0a000443, 0x00001021, 0x28420001, 0x10400034, + 0x00000000, 0x8f620040, 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, + 0x3c029000, 0x93620022, 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, + 0x8c440098, 0x0064182b, 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, + 0x02821025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02831825, + 0x34420001, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, + 0x24020002, 0x3c031000, 0xaf5401c0, 0xa34201c4, 0x24020001, 0xaf4301f8, + 0xa7620012, 0x0a000476, 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, + 0x3063fffe, 0xa7630012, 0x0e000b68, 0x00000000, 0x12e00003, 0x00000000, + 0x0e000f27, 0x00000000, 0x53c00004, 0x96a20008, 0x0e000c10, 0x00000000, + 0x96a20008, 0x8fbf0034, 0x8fbe0030, 0x8fb7002c, 0x8fb60028, 0x8fb50024, + 0x8fb40020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, + 0x30420001, 0x03e00008, 0x27bd0038, 0x27bdffe8, 0xafbf0010, 0x97420108, + 0x2403000b, 0x304400ff, 0x1083004e, 0x2882000c, 0x10400011, 0x24020006, + 0x1082003e, 0x28820007, 0x10400007, 0x28820008, 0x1080002b, 0x24020001, + 0x1082002e, 0x3c026000, 0x0a000504, 0x00000000, 0x14400061, 0x2882000a, + 0x1440002b, 0x00000000, 0x0a0004ec, 0x00000000, 0x2402001c, 0x1082004e, + 0x2882001d, 0x1040000e, 0x24020019, 0x10820041, 0x2882001a, 0x10400005, + 0x2402000e, 0x10820036, 0x00000000, 0x0a000504, 0x00000000, 0x2402001b, + 0x1082003c, 0x00000000, 0x0a000504, 0x00000000, 0x240200c1, 0x10820040, + 0x288200c2, 0x10400005, 0x24020080, 0x1082001f, 0x00000000, 0x0a000504, + 0x00000000, 0x240200c2, 0x1082003b, 0x00000000, 0x0a000504, 0x00000000, + 0x3c026000, 0x0e000c7d, 0xac400808, 0x0a000506, 0x8fbf0010, 0x8c444448, + 0x3c030800, 0xac640064, 0x0e000c7d, 0x00000000, 0x3c026000, 0x8c444448, + 0x3c030800, 0x0a000505, 0xac640068, 0x8f440100, 0x0e000508, 0x00000000, + 0x3c026000, 0x8c444448, 0x3c030800, 0x0a000505, 0xac64006c, 0x0e000cab, + 0x00000000, 0x0a000506, 0x8fbf0010, 0x8f440100, 0x0e000cd5, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000d1c, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x0a000506, 0x8fbf0010, 0x0e0005d7, 0x00000000, 0x0a000506, + 0x8fbf0010, 0x8f440100, 0x0e000d7e, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0e000e95, 0x00000000, 0x0a000506, 0x8fbf0010, 0x0e000626, 0x00000000, + 0x0a000506, 0x8fbf0010, 0x0e000b68, 0x00000000, 0x0a000506, 0x8fbf0010, + 0x0000000d, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c029000, + 0x34420001, 0xafb00010, 0x00808021, 0x02021025, 0x3c038000, 0xafbf0014, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x34420001, 0xa3620005, 0x8f63004c, 0x8f620054, 0x10620019, 0x3c028000, + 0x9762006a, 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, + 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, + 0x34420001, 0x02021025, 0x0e000c7d, 0xaf420020, 0x3c029000, 0x34420001, + 0x3c038000, 0x02021025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02021025, 0xa363007d, + 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x8fbf0014, 0xaf5001c0, + 0x8fb00010, 0x24020002, 0x3c031000, 0xa34201c4, 0xaf4301f8, 0x03e00008, + 0x27bd0018, 0x27bdffd8, 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, + 0xafb00010, 0x93630005, 0x00809021, 0x24020030, 0x30630030, 0x14620072, + 0x00a09821, 0x3c020800, 0x8c430020, 0x1060006c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac520000, 0x9363003e, 0x9362003f, 0x8f840018, + 0x00031a00, 0x00431025, 0xac820004, 0x93630081, 0x93620082, 0x8f850018, + 0x00031e00, 0x00021400, 0x00621825, 0xaca30008, 0x8f840018, 0x8f620040, + 0xac82000c, 0x8f830018, 0x8f620048, 0xac620010, 0x8f840018, 0x8f62004c, + 0x3c110800, 0xac820014, 0x8f830018, 0x8f620050, 0x26304660, 0x00002021, + 0xac620018, 0x9602000e, 0x8f850018, 0x3c03c00b, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f830018, 0x8f620054, 0xac620000, 0x8f840018, 0x8f620058, + 0xac820004, 0x8f830018, 0x8f62005c, 0xac620008, 0x8f840018, 0x8f620060, + 0xac82000c, 0x8f850018, 0x8f620064, 0xaca20010, 0x97630068, 0x9762006a, + 0x8f840018, 0x00031c00, 0x00431025, 0xac820014, 0x8f830018, 0x00002021, + 0xac600018, 0x9602000e, 0x8f850018, 0x3c03c00c, 0x00431025, 0x0e001044, + 0xaca2001c, 0x8f840018, 0x8f630018, 0xac830000, 0x936200c4, 0x30420002, + 0x10400006, 0x00000000, 0x976200c8, 0x8f830018, 0x3042ffff, 0x0a0005b5, + 0xac620004, 0x8f820018, 0xac400004, 0x8f830018, 0x8f62006c, 0xac620008, + 0x8f840018, 0x8f6200dc, 0xac82000c, 0x8f830018, 0xac600010, 0x93620005, + 0x8f830018, 0x00021600, 0x00531025, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x26224660, 0xaca30018, 0x9443000e, 0x8f850018, + 0x3c02400d, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x02402021, + 0x8fbf0020, 0x8fb3001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb00010, 0x27500100, 0xafbf0018, 0xafb10014, + 0x9603000c, 0x240200c1, 0x5462001d, 0x8e040000, 0x3c029000, 0x8f440100, + 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, 0x34630001, 0x3c058000, + 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00451024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, 0xa34201c4, 0xaf4301f8, + 0x0a000622, 0x8fbf0018, 0x8f65004c, 0x24060001, 0x0e000db5, 0x2407049f, + 0x3c020800, 0x8c430020, 0x9611000c, 0x1060001d, 0x8e100000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f840018, 0x240204a2, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, + 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, + 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffb0, 0xafb1002c, 0x27510100, 0xafbf004c, + 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, 0xafb30034, + 0xafb20030, 0xafb00028, 0x8e350000, 0x9634000c, 0x3c026000, 0x8c434448, + 0x0000f021, 0xaf630170, 0x8f620040, 0x8e230014, 0x0000b821, 0x00431023, + 0x044001ec, 0x0000b021, 0x32820010, 0x1040002e, 0x3c026000, 0x9363003f, + 0x9222000e, 0x10430006, 0x2402000c, 0x9223000f, 0x10620003, 0x24020014, + 0x14620025, 0x3c026000, 0x32820004, 0x10400007, 0x241e0001, 0x8f620050, + 0x24420001, 0xaf620050, 0x8f630054, 0x24630001, 0xaf630054, 0x32830102, + 0x24020002, 0x5462000d, 0x9222000f, 0x8f620040, 0x24420001, 0xaf620040, + 0x8f630048, 0x8f620040, 0x24630001, 0x54620005, 0x9222000f, 0x8f620048, + 0x24420001, 0xaf620048, 0x9222000f, 0xa362003f, 0x9223000f, 0x24020012, + 0x14620007, 0x3c026000, 0x3c030800, 0x8c620074, 0x24420001, 0x0e000f6e, + 0xac620074, 0x3c026000, 0x8c434448, 0x32820040, 0xaf630174, 0x32830020, + 0xafa30010, 0x32830080, 0xafa30014, 0x32830001, 0xafa3001c, 0x32830008, + 0xafa30020, 0x32830100, 0x104000bb, 0xafa30018, 0x8e260010, 0x8f630054, + 0x24c2ffff, 0x00431023, 0x18400006, 0x00000000, 0x0000000d, 0x00000000, + 0x24000128, 0x0a0006b2, 0x00009021, 0x8f62004c, 0x00c21023, 0x18400028, + 0x00009021, 0x93650120, 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, + 0x24420001, 0x30a500ff, 0x00804021, 0x1485000b, 0xac62008c, 0x3c040800, + 0x8c830090, 0x24630001, 0xac830090, 0x93620122, 0x30420001, 0x00021023, + 0x30420005, 0x0a0006b2, 0x34520004, 0x27670100, 0x00041080, 0x00e21021, + 0x8c430000, 0x00c31823, 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, + 0x00041080, 0x10880007, 0x3c030800, 0xa3640121, 0x8c620094, 0x24120005, + 0x24420001, 0x0a0006b2, 0xac620094, 0x24120004, 0x32420001, 0x10400020, + 0x3c020800, 0x8c430020, 0x8e300000, 0x1060001c, 0x8e330010, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac530014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024010, 0x00621825, + 0x0e001044, 0xaca3001c, 0x32420004, 0x10400060, 0x00003821, 0x3c029000, + 0x8e260010, 0x34420001, 0x3c038000, 0x02a21025, 0xa360007c, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, 0x30420080, + 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, 0x8f620064, + 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, 0x93620023, + 0x3042007f, 0xa3620023, 0xaf660064, 0x3c023fff, 0x0a000702, 0x3442ffff, + 0x8f62005c, 0x00c21023, 0x04400011, 0x00000000, 0x8f65005c, 0x8f630064, + 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf660064, 0x00a32823, 0x00852821, + 0x0045102b, 0x10400004, 0x00c51021, 0x3c053fff, 0x34a5ffff, 0x00c51021, + 0xaf62005c, 0x24070001, 0xaf66004c, 0x8f620054, 0x14c20005, 0x00000000, + 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, 0x00022880, + 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, + 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, + 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, 0x2403fffe, + 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, 0x02a21025, + 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620005, 0x00e0b021, + 0x0e000f2a, 0x00000000, 0x00403821, 0x00e0b021, 0x8fa20010, 0x10400008, + 0x00000000, 0x8e220018, 0xaf620018, 0x8e23001c, 0xaf63001c, 0x8e220020, + 0x24160001, 0xaf620058, 0x13c00036, 0x32820004, 0x10400035, 0x8fa30014, + 0x93620023, 0x30420040, 0x10400031, 0x3c020800, 0x8c430020, 0x1060001c, + 0x8e300000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, + 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x24020587, 0xac620014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024019, 0x00621825, 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, + 0x02a21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, + 0x24020001, 0xaf62000c, 0x93630023, 0x3c028000, 0x34420001, 0x02a21025, + 0x306300bf, 0xa3630023, 0xaf420020, 0x8fa30014, 0x10600012, 0x8fa3001c, + 0x9362007c, 0x24420001, 0xa362007c, 0x9363007e, 0x9362007a, 0x1462000b, + 0x8fa3001c, 0x9362007c, 0x3c030800, 0x8c640024, 0x0044102b, 0x14400005, + 0x8fa3001c, 0x0e000f2a, 0x00000000, 0x02c2b025, 0x8fa3001c, 0x3062ffff, + 0x10400003, 0x32820200, 0x0a000793, 0x24170004, 0x10400003, 0x00000000, + 0x24170040, 0x24160001, 0x13c0005d, 0x32820002, 0x1040005c, 0x8fa20020, + 0x9222000a, 0x30420020, 0x10400033, 0x3c100800, 0x93620023, 0x30420040, + 0x1040002f, 0x8e020020, 0x1040001e, 0x3c029000, 0x0e001006, 0x00000000, + 0x8f820018, 0xac550000, 0x8f840018, 0x3c02008d, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f840018, + 0x240205bf, 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02a21025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02a21025, 0x306300bf, 0xa3630023, 0xaf420020, + 0x8e020020, 0x10400023, 0x8fa20020, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e230000, 0xac830000, 0x9222000a, 0x8f830018, 0x00021600, 0xac620004, + 0x8f840018, 0x8f620040, 0xac820008, 0x8f850018, 0x8f63004c, 0xaca3000c, + 0x9362003f, 0x8f840018, 0x304200ff, 0xac820010, 0x8f830018, 0x3c026000, + 0xac600014, 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02401a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x8fa20020, 0x1040000e, 0x8fa20018, 0x9222000a, 0xa3620082, 0x56e00005, + 0x36f70008, 0x8fa30018, 0x10600004, 0x00000000, 0x36f70008, 0x0a000801, + 0x24160001, 0x0e000de1, 0x02a02021, 0x8fa20018, 0x10400003, 0x00000000, + 0x36f70010, 0x24160001, 0x12c00019, 0x3c029000, 0x34420001, 0x02a21025, + 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, + 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, 0x02a31825, 0x02e21025, + 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5501c0, 0xa34201c4, 0xaf4301f8, 0x9363003f, 0x24020012, + 0x14620004, 0x3c026000, 0x0e000f6e, 0x00000000, 0x3c026000, 0x8c434448, + 0xaf630178, 0x8fbf004c, 0x8fbe0048, 0x8fb70044, 0x8fb60040, 0x8fb5003c, + 0x8fb40038, 0x8fb30034, 0x8fb20030, 0x8fb1002c, 0x8fb00028, 0x03e00008, + 0x27bd0050, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f500180, 0x97420184, + 0x30420200, 0x14400015, 0x00000000, 0x8f430188, 0x3c02ff00, 0x00621824, + 0x3c020200, 0x10620031, 0x0043102b, 0x14400007, 0x3c020300, 0x1060000b, + 0x3c020100, 0x1062000d, 0x00000000, 0x0a0008b4, 0x00000000, 0x10620027, + 0x3c020400, 0x1062003e, 0x02002021, 0x0a0008b4, 0x00000000, 0x0e000e1e, + 0x02002021, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420020, 0x1440005e, + 0x8fbf0014, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, + 0x34630001, 0x02031825, 0x34420020, 0xa3620005, 0xaf430020, 0x93620005, + 0x30420020, 0x14400003, 0x02002021, 0x0000000d, 0x02002021, 0x0e000553, + 0x24055854, 0x0a0008b6, 0x8fbf0014, 0x93620005, 0x30420001, 0x1040003f, + 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, 0x3c048000, 0x3c030800, + 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, 0x02042025, 0xaf440020, + 0x1040002d, 0x8fbf0014, 0x0a000894, 0x00000000, 0x00002821, 0x00003021, + 0x0e000f78, 0x240706a4, 0x3c020800, 0x8c430020, 0x10600023, 0x8fbf0014, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, + 0x8f840018, 0x00031a00, 0x00431025, 0xac820004, 0x8f830018, 0xac600008, + 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, + 0x9443466e, 0x8f850018, 0x3c02400a, 0x00621825, 0x0e001044, 0xaca3001c, + 0x0a0008b6, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, 0x03e00008, + 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93420148, 0x2444ffff, 0x2c830005, + 0x10600047, 0x3c020800, 0x24424598, 0x00041880, 0x00621821, 0x8c640000, + 0x00800008, 0x00000000, 0x8f430144, 0x8f62000c, 0x14620006, 0x24020001, + 0xaf62000c, 0x0e000909, 0x00000000, 0x0a000907, 0x8fbf0010, 0x8f62000c, + 0x0a000900, 0x00000000, 0x97630010, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620010, 0x0e000eeb, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620010, + 0x0a000900, 0x00000000, 0x97630012, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620012, 0x0e000f06, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620012, + 0x0a000900, 0x00000000, 0x97630014, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620014, 0x0e000f21, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620014, + 0x0a000900, 0x00000000, 0x97630016, 0x8f420144, 0x14430006, 0x24020001, + 0xa7620016, 0x0e000f24, 0x00000000, 0x0a000907, 0x8fbf0010, 0x97620016, + 0x14400006, 0x8fbf0010, 0x3c030800, 0x8c620070, 0x24420001, 0xac620070, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x93620081, + 0x3c030800, 0x8c640048, 0x0044102b, 0x14400028, 0x3c029000, 0x8f460140, + 0x34420001, 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, + 0x24020012, 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, + 0xaf440020, 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0x0a00096d, 0xaf4601c0, 0x93620081, 0x24420001, 0x0e000f2a, 0xa3620081, + 0x9763006a, 0x00032880, 0x14a00002, 0x00403821, 0x24050001, 0x97630068, + 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, + 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, + 0x00c02021, 0x8f420074, 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, + 0x10e0001a, 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf4401c0, 0xa34201c4, 0xaf4301f8, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0xafb3001c, 0x27530100, 0xafbf0024, 0xafb40020, 0xafb20018, + 0xafb10014, 0xafb00010, 0x96620008, 0x3c140800, 0x8f520100, 0x30420001, + 0x104000cf, 0x00000000, 0x8e700018, 0x8f630054, 0x2602ffff, 0x00431023, + 0x18400006, 0x00000000, 0x0000000d, 0x00000000, 0x24000128, 0x0a0009b6, + 0x00008821, 0x8f62004c, 0x02021023, 0x18400028, 0x00008821, 0x93650120, + 0x93640121, 0x3c030800, 0x8c62008c, 0x308400ff, 0x24420001, 0x30a500ff, + 0x00803821, 0x1485000b, 0xac62008c, 0x3c040800, 0x8c830090, 0x24630001, + 0xac830090, 0x93620122, 0x30420001, 0x00021023, 0x30420005, 0x0a0009b6, + 0x34510004, 0x27660100, 0x00041080, 0x00c21021, 0x8c430000, 0x02031823, + 0x04600004, 0x24820001, 0x30440007, 0x1485fff9, 0x00041080, 0x10870007, + 0x3c030800, 0xa3640121, 0x8c620094, 0x24110005, 0x24420001, 0x0a0009b6, + 0xac620094, 0x24110004, 0x32220001, 0x1040001e, 0x8e820020, 0x1040001d, + 0x32220004, 0x0e001006, 0x00000000, 0x8f820018, 0xac520000, 0x8f840018, + 0x24020001, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac500014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c024010, 0x00621825, 0x0e001044, 0xaca3001c, 0x32220004, 0x10400076, + 0x00003821, 0x3c029000, 0x34420001, 0x3c038000, 0x02421025, 0xa360007c, + 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620023, + 0x30420080, 0x10400011, 0x00000000, 0x8f65005c, 0x8f63004c, 0x9764003c, + 0x8f620064, 0x00a32823, 0x00852821, 0x00a2102b, 0x54400006, 0x3c023fff, + 0x93620023, 0x3042007f, 0xa3620023, 0xaf700064, 0x3c023fff, 0x0a000a03, + 0x3442ffff, 0x8f62005c, 0x02021023, 0x04400011, 0x00000000, 0x8f65005c, + 0x8f630064, 0x9764003c, 0x3c023fff, 0x3442ffff, 0xaf700064, 0x00a32823, + 0x00852821, 0x0045102b, 0x10400004, 0x02051021, 0x3c053fff, 0x34a5ffff, + 0x02051021, 0xaf62005c, 0x24070001, 0xaf70004c, 0x8f620054, 0x16020005, + 0x00000000, 0x93620023, 0x30420040, 0x10400017, 0x24020001, 0x9762006a, + 0x00022880, 0x50a00001, 0x24050001, 0x97630068, 0x93640081, 0x3c020800, + 0x8c46004c, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, + 0x3c020800, 0x8c440050, 0x00c4182b, 0x54600001, 0x00c02021, 0x8f420074, + 0x2403fffe, 0x00832824, 0x00a21021, 0xaf62000c, 0x3c028000, 0x34420001, + 0x02421025, 0xa3600081, 0xaf420020, 0x9363007e, 0x9362007a, 0x10620004, + 0x00000000, 0x0e000f2a, 0x00000000, 0x00403821, 0x10e00017, 0x3c029000, + 0x34420001, 0x02421025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, 0x3c048000, 0x02421025, + 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, + 0x3c031000, 0xaf5201c0, 0xa34201c4, 0xaf4301f8, 0x9342010b, 0x8e830020, + 0x27500100, 0x38420006, 0x10600029, 0x2c510001, 0x0e001006, 0x00000000, + 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x96020008, 0xac820004, + 0x8f830018, 0x8e020014, 0xac620008, 0x8f850018, 0x3c026000, 0x8c434448, + 0xaca3000c, 0x8f840018, 0x96020012, 0xac820010, 0x8f850018, 0x8e030020, + 0xaca30014, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, 0x00431025, + 0xac820018, 0x12200005, 0x3c020800, 0x9443466e, 0x8f840018, 0x0a000a78, + 0x3c024013, 0x9443466e, 0x8f840018, 0x3c024014, 0x00621825, 0xac83001c, + 0x0e001044, 0x24040001, 0x8e630014, 0x8f620040, 0x14430003, 0x00431023, + 0x0a000a83, 0x00001021, 0x28420001, 0x10400034, 0x00000000, 0x8f620040, + 0xaf630040, 0x9362003e, 0x30420001, 0x1440000b, 0x3c029000, 0x93620022, + 0x24420001, 0xa3620022, 0x93630022, 0x3c020800, 0x8c440098, 0x0064182b, + 0x1460001e, 0x3c020800, 0x3c029000, 0x34420001, 0x02421025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, + 0x9362007d, 0x34630001, 0x3c048000, 0x02431825, 0x34420001, 0xa362007d, + 0xaf430020, 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, + 0xaf5201c0, 0xa34201c4, 0x24020001, 0xaf4301f8, 0xa7620012, 0x0a000ab6, + 0xa3600022, 0x9743007a, 0x9444002a, 0x00641821, 0x3063fffe, 0xa7630012, + 0x0e000b68, 0x00000000, 0x97420108, 0x8fbf0024, 0x8fb40020, 0x8fb3001c, + 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x00021042, 0x30420001, 0x03e00008, + 0x27bd0028, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, 0xafb00010, + 0x27500100, 0xafbf001c, 0x10400046, 0xafb10014, 0x0e001006, 0x00000000, + 0x8f840018, 0x8e020000, 0xac820000, 0x936300b1, 0x936200c5, 0x8f850018, + 0x00031e00, 0x00021400, 0x34420100, 0x00621825, 0xaca30004, 0x8f840018, + 0x8e02001c, 0xac820008, 0x8f830018, 0x8f620048, 0xac62000c, 0x8f840018, + 0x96020012, 0xac820010, 0x8f830018, 0x8f620040, 0x24040001, 0xac620014, + 0x8f850018, 0x3c026000, 0x8c434448, 0x3c020800, 0x24514660, 0xaca30018, + 0x9623000e, 0x8f850018, 0x3c024016, 0x00621825, 0x0e001044, 0xaca3001c, + 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, 0x1040001a, 0x8e100000, + 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, 0x8f830018, 0xac600004, + 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, + 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, 0x8c634448, 0x24040001, + 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, 0x00431025, 0x0e001044, + 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x27bdffe0, 0xafb20018, 0x3c120800, 0x8e420020, + 0xafb00010, 0x27500100, 0xafbf001c, 0x10400041, 0xafb10014, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x24020100, + 0xac820004, 0x8f830018, 0x8e02001c, 0xac620008, 0x8f840018, 0x8e020018, + 0xac82000c, 0x8f830018, 0x96020012, 0xac620010, 0x8f840018, 0x96020008, + 0xac820014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0x24514660, 0xaca30018, 0x9623000e, 0x8f850018, 0x3c024017, 0x00621825, + 0x0e001044, 0xaca3001c, 0x96030008, 0x30630010, 0x1060001c, 0x8e420020, + 0x1040001a, 0x8e100000, 0x0e001006, 0x00000000, 0x8f820018, 0xac500000, + 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, 0x8f830018, 0xac60000c, + 0x8f820018, 0xac400010, 0x8f830018, 0xac600014, 0x8f850018, 0x3c036000, + 0x8c634448, 0x24040001, 0xaca30018, 0x9622000e, 0x8f850018, 0x3c034015, + 0x00431025, 0x0e001044, 0xaca2001c, 0x00001021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0xafbf0010, + 0x936200c4, 0x30420002, 0x10400019, 0x00000000, 0x936200c5, 0x936300b1, + 0x00431023, 0x304400ff, 0x30830080, 0x10600004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000a6a, 0x93620004, 0x00441023, 0x304400ff, 0x30830080, + 0x10600004, 0x2482ffff, 0x8f650024, 0x0a000b82, 0x00000000, 0x00022b00, + 0x8f620024, 0x0045102b, 0x10400002, 0x00000000, 0x8f650024, 0x8f620048, + 0x8f630040, 0x00431823, 0x0065202b, 0x10800004, 0x00000000, 0x8f620040, + 0x00451021, 0xaf620048, 0x9762003c, 0x0062102b, 0x10400041, 0x8fbf0010, + 0x10a0003f, 0x3c029000, 0x34420001, 0x3c040800, 0x8c830080, 0x8f450100, + 0x3c068000, 0x24630001, 0x00a21025, 0xac830080, 0xaf420020, 0x8f420020, + 0x00461024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, 0x3c048000, + 0x00a31825, 0x34420004, 0xa362007d, 0xaf430020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c030800, 0xaf4501c0, 0xa34201c4, 0x8c640020, + 0x3c021000, 0xaf4201f8, 0x1080001f, 0x8fbf0010, 0x0e001006, 0x00000000, + 0x8f830018, 0x8f420100, 0xac620000, 0x8f840018, 0x8f620040, 0xac820004, + 0x8f850018, 0x8f620048, 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, + 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, 0x8c434448, + 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c0240c2, 0x00621825, + 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0010, 0x03e00008, 0x27bd0018, + 0x3c020800, 0x24423958, 0xaf82000c, 0x03e00008, 0x00000000, 0x27bdffe8, + 0xafb00010, 0x27500100, 0xafbf0014, 0x8e02001c, 0x14400003, 0x3c020800, + 0x0000000d, 0x3c020800, 0x8c430020, 0x10600026, 0x00001021, 0x0e001006, + 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, 0x8e02001c, + 0xac820004, 0x8f830018, 0xac600008, 0x8f840018, 0x8e020018, 0xac82000c, + 0x8f850018, 0x96020012, 0xaca20010, 0x8f830018, 0x3c106000, 0xac600014, + 0x8f840018, 0x8e024448, 0x3c030800, 0xac820018, 0x9462466e, 0x8f840018, + 0x3c034012, 0x00431025, 0xac82001c, 0x0e001044, 0x24040001, 0x8e036800, + 0x00001021, 0x3c040001, 0x00641825, 0xae036800, 0x0a000c0d, 0x8fbf0014, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x97430078, + 0x9444002e, 0x00001021, 0x00641821, 0x3063fffe, 0x03e00008, 0xa7630010, + 0x27450100, 0x8f640048, 0x8ca30018, 0x00641023, 0x18400021, 0x00000000, + 0xaf630048, 0x8f620040, 0x9763003c, 0x00821023, 0x0043102a, 0x1040001a, + 0x3c029000, 0x8ca40000, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420004, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0xaf4301f8, 0x03e00008, 0x00001021, 0x8f420100, 0x34420001, + 0xaf4200a4, 0x03e00008, 0x00001021, 0x27bdffe0, 0xafbf0018, 0xafb10014, + 0xafb00010, 0x9362007e, 0x30d000ff, 0x16020029, 0x00808821, 0x93620080, + 0x16020026, 0x00000000, 0x9362007f, 0x16020023, 0x00000000, 0x9362007a, + 0x16020004, 0x00000000, 0x0000000d, 0x00000000, 0x24000771, 0x0e000f49, + 0x00000000, 0x3c039000, 0x34630001, 0x3c048000, 0x02231825, 0xa370007a, + 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, 0x3c028000, 0x9363007d, + 0x34420001, 0x3c048000, 0x02221025, 0xa363007d, 0xaf420020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf5101c0, 0xa34201c4, + 0xaf4301f8, 0x0a000c79, 0x8fbf0018, 0x0000000d, 0x00000000, 0x24000781, + 0x8fbf0018, 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, + 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, 0x10600024, 0xafbf0014, + 0x0e001006, 0x00000000, 0x8f830018, 0x8e020000, 0xac620000, 0x8f840018, + 0x8e020004, 0xac820004, 0x8f830018, 0x8e020018, 0xac620008, 0x8f840018, + 0x8e03001c, 0xac83000c, 0x9602000c, 0x9203000a, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, + 0xafb00010, 0x27500100, 0x10600020, 0xafbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac400000, 0x8f830018, 0xac600004, 0x8f820018, 0xac400008, + 0x8f830018, 0xac60000c, 0x9602000c, 0x9603000e, 0x8f840018, 0x00021400, + 0x00431025, 0xac820010, 0x8f830018, 0x3c026000, 0xac600014, 0x8f840018, + 0x8c434448, 0xac830018, 0x96020008, 0x3c030800, 0x9464466e, 0x8f850018, + 0x00021400, 0x00441025, 0x24040001, 0x0e001044, 0xaca2001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafb00010, 0x27500100, + 0xafbf0014, 0x9602000c, 0x10400024, 0x00802821, 0x3c020800, 0x8c430020, + 0x1060003a, 0x8fbf0014, 0x0e001006, 0x00000000, 0x8f840018, 0x8e030000, + 0xac830000, 0x9602000c, 0x8f840018, 0x00021400, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, 0x3c020800, + 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02400b, 0x00621825, 0x0e001044, + 0xaca3001c, 0x0a000d19, 0x8fbf0014, 0x93620005, 0x30420010, 0x14400015, + 0x3c029000, 0x34420001, 0x00a21025, 0xaf420020, 0x3c038000, 0x8f420020, + 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x93620005, 0x34630001, + 0x00a02021, 0x00a31825, 0x24055852, 0x34420010, 0xa3620005, 0x0e000553, + 0xaf430020, 0x0a000d19, 0x8fbf0014, 0x0000000d, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, + 0x27500100, 0x10600022, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f840018, + 0x8e020004, 0xac820000, 0x9603000c, 0x9762002c, 0x8f840018, 0x00031c00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, + 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, + 0x3c02400e, 0x00621825, 0x0e001044, 0xaca3001c, 0x0e000d48, 0x8e040000, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c038000, 0x8f420278, + 0x00431024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf440240, 0xa3420244, + 0x03e00008, 0xaf430278, 0x3c020800, 0x8c430020, 0x27bdffe0, 0xafb10014, + 0x00808821, 0xafb20018, 0x00c09021, 0xafb00010, 0x30b0ffff, 0x1060001c, + 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, 0xac510000, 0x8f840018, + 0x00101400, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac520014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c024019, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x27bdffe8, 0x27450100, + 0xafbf0010, 0x94a3000c, 0x240200c1, 0x14620029, 0x00803021, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x3c028000, 0x34420001, 0x3c049000, 0x34840001, 0x3c058000, + 0x24030012, 0x00c21025, 0x00c42025, 0xa363003f, 0xaf420020, 0xaf440020, + 0x8f420020, 0x00451024, 0x1440fffd, 0x3c038000, 0x9362007d, 0x34630001, + 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, 0x8f4201f8, + 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, + 0xaf4301f8, 0x0a000db3, 0x8fbf0010, 0x00c02021, 0x94a5000c, 0x24060001, + 0x0e000f78, 0x240706d8, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, + 0x8c430020, 0x27bdffe0, 0xafb00010, 0x00808021, 0xafb20018, 0x00a09021, + 0xafb10014, 0x30d100ff, 0x1060001c, 0xafbf001c, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x8f840018, 0x24020001, 0xac820004, 0x8f830018, + 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, 0x8f820018, + 0xac520014, 0x8f840018, 0x3c026000, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024010, 0x00621825, 0xac83001c, 0x0e001044, + 0x02202021, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x93620005, 0x30420001, + 0x10400033, 0x00808021, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93620005, + 0x3c048000, 0x3c030800, 0x304200fe, 0xa3620005, 0x8c620020, 0x34840001, + 0x02042025, 0xaf440020, 0x10400020, 0x8fbf0014, 0x0e001006, 0x00000000, + 0x8f820018, 0xac500000, 0x93630082, 0x9362003f, 0x8f840018, 0x00031a00, + 0x00431025, 0xac820004, 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, + 0x8f830018, 0xac600010, 0x8f820018, 0xac400014, 0x8f840018, 0x3c026000, + 0x8c434448, 0x3c020800, 0xac830018, 0x9443466e, 0x8f840018, 0x3c02400a, + 0x00621825, 0xac83001c, 0x0e001044, 0x24040001, 0x8fbf0014, 0x8fb00010, + 0x03e00008, 0x27bd0018, 0x27bdffe8, 0xafbf0010, 0x8f420188, 0x00803021, + 0x9364003f, 0x24030012, 0x00021402, 0x1483001c, 0x304500ff, 0x3c029000, + 0x34420001, 0x3c038000, 0x00c21025, 0xa3650080, 0xa365007a, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x3c028000, 0x9363007d, 0x34420001, + 0x3c048000, 0x00c21025, 0xa363007d, 0xaf420020, 0x8f4201f8, 0x00441024, + 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, 0xa34201c4, 0xaf4301f8, + 0x0a000e54, 0x8fbf0010, 0x9362007e, 0x1445000e, 0x00000000, 0x93620080, + 0x1045000b, 0x00000000, 0xa3650080, 0x8f820000, 0x93660080, 0x8f440180, + 0x8f65004c, 0x8c430000, 0x0060f809, 0x00000000, 0x0a000e54, 0x8fbf0010, + 0xa3650080, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x3c020800, 0x8c430020, + 0x27bdffe0, 0xafb10014, 0x00808821, 0xafb20018, 0x00a09021, 0xafb00010, + 0x30d000ff, 0x1060002f, 0xafbf001c, 0x0e001006, 0x00000000, 0x8f820018, + 0xac510000, 0x8f830018, 0xac700004, 0x8f820018, 0xac520008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x9763006a, 0x00032880, 0x50a00001, + 0x24050001, 0x97630068, 0x93640081, 0x3c020800, 0x8c46004c, 0x00652821, + 0x00852804, 0x00c5102b, 0x54400001, 0x00a03021, 0x3c020800, 0x8c440050, + 0x00c4182b, 0x54600001, 0x00c02021, 0x8f830018, 0x2402fffe, 0x00822824, + 0x3c026000, 0xac650014, 0x8f840018, 0x8c434448, 0x3c020800, 0xac830018, + 0x9443466e, 0x8f840018, 0x3c024011, 0x00621825, 0xac83001c, 0x0e001044, + 0x24040001, 0x8fbf001c, 0x8fb20018, 0x8fb10014, 0x8fb00010, 0x03e00008, + 0x27bd0020, 0x27bdffe8, 0xafbf0014, 0xafb00010, 0x8f440100, 0x27500100, + 0x8f650050, 0x0e000c45, 0x9206001b, 0x3c020800, 0x8c430020, 0x1060001d, + 0x8e100018, 0x0e001006, 0x00000000, 0x8f840018, 0x8f420100, 0xac820000, + 0x8f830018, 0xac700004, 0x8f840018, 0x8f620050, 0xac820008, 0x8f830018, + 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, 0x3c026000, 0xac600014, + 0x8f850018, 0x8c434448, 0x24040001, 0x3c020800, 0xaca30018, 0x9443466e, + 0x8f850018, 0x3c02401c, 0x00621825, 0x0e001044, 0xaca3001c, 0x8fbf0014, + 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c029000, 0x8f460140, 0x34420001, + 0x3c038000, 0x00c21025, 0xaf420020, 0x8f420020, 0x00431024, 0x1440fffd, + 0x3c048000, 0x34840001, 0x3c059000, 0x34a50001, 0x3c078000, 0x24020012, + 0x24030080, 0x00c42025, 0x00c52825, 0xa362003f, 0xa3630082, 0xaf440020, + 0xaf450020, 0x8f420020, 0x00471024, 0x1440fffd, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c048000, 0x00c31825, 0x34420020, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00441024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4601c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x8f430238, 0x3c020800, 0x04610013, + 0x8c44009c, 0x2406fffe, 0x3c050800, 0x3c038000, 0x2484ffff, 0x14800009, + 0x00000000, 0x97420078, 0x8ca3007c, 0x24420001, 0x00461024, 0x24630001, + 0xa7620010, 0x03e00008, 0xaca3007c, 0x8f420238, 0x00431024, 0x1440fff3, + 0x2484ffff, 0x8f420140, 0x3c031000, 0xaf420200, 0x03e00008, 0xaf430238, + 0x3c029000, 0x8f440140, 0x34420001, 0x3c038000, 0x00821025, 0xaf420020, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x3c038000, 0x9362007d, + 0x34630001, 0x3c058000, 0x00831825, 0x34420001, 0xa362007d, 0xaf430020, + 0x8f4201f8, 0x00451024, 0x1440fffd, 0x24020002, 0x3c031000, 0xaf4401c0, + 0xa34201c4, 0x03e00008, 0xaf4301f8, 0x0000000d, 0x03e00008, 0x00000000, + 0x0000000d, 0x03e00008, 0x00000000, 0x24020001, 0x03e00008, 0xa7620010, + 0x9362003f, 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, + 0x00621825, 0x14600003, 0x24020012, 0x14820003, 0x00000000, 0x03e00008, + 0x00001021, 0x9363007e, 0x9362007a, 0x14620006, 0x00000000, 0x9363007e, + 0x24020001, 0x24630001, 0x03e00008, 0xa363007e, 0x9363007e, 0x93620080, + 0x14620004, 0x24020001, 0xa362000b, 0x03e00008, 0x24020001, 0x03e00008, + 0x00001021, 0x9362000b, 0x10400021, 0x00001021, 0xa360000b, 0x9362003f, + 0x304400ff, 0x3883000e, 0x2c630001, 0x38820010, 0x2c420001, 0x00621825, + 0x14600015, 0x00001821, 0x24020012, 0x10820012, 0x00000000, 0x9363007e, + 0x9362007a, 0x14620007, 0x00000000, 0x9362007e, 0x24030001, 0x24420001, + 0xa362007e, 0x03e00008, 0x00601021, 0x9363007e, 0x93620080, 0x14620004, + 0x00001821, 0x24020001, 0xa362000b, 0x24030001, 0x03e00008, 0x00601021, + 0x03e00008, 0x00000000, 0x24040001, 0xaf64000c, 0x8f6300dc, 0x8f6200cc, + 0x50620001, 0xa7640010, 0xa7640012, 0xa7640014, 0x03e00008, 0xa7640016, + 0x27bdffd8, 0xafb00010, 0x00808021, 0xafb3001c, 0x00c09821, 0xafbf0020, + 0xafb20018, 0xafb10014, 0x93620023, 0x00e09021, 0x30420040, 0x10400020, + 0x30b1ffff, 0x3c020800, 0x8c430020, 0x1060001c, 0x00000000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x3c02008d, 0xac820004, + 0x8f830018, 0xac600008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac520014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c024019, 0x00621825, + 0x0e001044, 0xaca3001c, 0x93620023, 0x30420020, 0x14400003, 0x3c020800, + 0x52600020, 0x3c029000, 0x8c430020, 0x1060001d, 0x3c029000, 0x0e001006, + 0x00000000, 0x8f820018, 0xac500000, 0x8f840018, 0x00111400, 0xac820004, + 0x8f830018, 0xac720008, 0x8f820018, 0xac40000c, 0x8f830018, 0xac600010, + 0x8f820018, 0xac400014, 0x8f850018, 0x3c026000, 0x8c434448, 0x24040001, + 0x3c020800, 0xaca30018, 0x9443466e, 0x8f850018, 0x3c02401b, 0x00621825, + 0x0e001044, 0xaca3001c, 0x3c029000, 0x34420001, 0x02021025, 0xaf420020, + 0x3c038000, 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x93630023, + 0x3c028000, 0x34420001, 0x02021025, 0x8fbf0020, 0x8fb3001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x3063009f, 0xa3630023, 0xaf420020, 0x03e00008, + 0x27bd0028, 0x3c020800, 0x8c430020, 0x27bdffe8, 0xafb00010, 0x27500100, + 0x1060001d, 0xafbf0014, 0x0e001006, 0x00000000, 0x8f830018, 0x8e020004, + 0xac620000, 0x8f840018, 0x8e020018, 0xac820004, 0x8f850018, 0x8e020000, + 0xaca20008, 0x8f830018, 0xac60000c, 0x8f820018, 0xac400010, 0x8f830018, + 0xac600014, 0x8f820018, 0xac400018, 0x96030008, 0x3c020800, 0x9444466e, + 0x8f850018, 0x00031c00, 0x00641825, 0x24040001, 0x0e001044, 0xaca3001c, + 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, 0x3c060800, 0x24c54660, + 0x3c02000a, 0x03421821, 0x94640006, 0x94a2000a, 0x00441023, 0x00021400, + 0x00021c03, 0x04610006, 0xa4a40006, 0x0000000d, 0x00000000, 0x2400005a, + 0x0a00101b, 0x24020001, 0x8f820014, 0x0062102b, 0x14400002, 0x00001021, + 0x24020001, 0x304200ff, 0x1040001c, 0x274a0400, 0x3c07000a, 0x3c020800, + 0x24454660, 0x94a9000a, 0x8f880014, 0x03471021, 0x94430006, 0x00402021, + 0xa4a30006, 0x94820006, 0xa4a20006, 0x01221023, 0x00021400, 0x00021403, + 0x04410006, 0x0048102b, 0x0000000d, 0x00000000, 0x2400005a, 0x0a001036, + 0x24020001, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1440ffec, + 0x03471021, 0x24c44660, 0x8c820010, 0xaf420038, 0x8c830014, 0x3c020005, + 0xaf43003c, 0xaf420030, 0xaf800010, 0xaf8a0018, 0x03e00008, 0x00000000, + 0x27bdffe0, 0x8f820010, 0x8f850018, 0x3c070800, 0x24e84660, 0xafbf001c, + 0xafb20018, 0xafb10014, 0xafb00010, 0x9503000a, 0x8d060014, 0x00009021, + 0x309000ff, 0x00e08821, 0x24420001, 0x24a50020, 0x24630001, 0xaf820010, + 0xaf850018, 0xa503000a, 0x24c30020, 0x3c028000, 0x04c10007, 0xad030014, + 0x00621024, 0x14400005, 0x26224660, 0x8d020010, 0x24420001, 0xad020010, + 0x26224660, 0x9444000a, 0x94450018, 0x0010102b, 0x00a41826, 0x2c630001, + 0x00621825, 0x1060001c, 0x3c030006, 0x8f820010, 0x24120001, 0x00021140, + 0x00431025, 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27450400, + 0x8f420000, 0x30420010, 0x1040fffd, 0x26224660, 0x9444000a, 0x94430018, + 0xaf800010, 0xaf850018, 0x14830012, 0x26274660, 0x0e0010d2, 0x00000000, + 0x1600000e, 0x26274660, 0x0e001006, 0x00000000, 0x0a00108f, 0x26274660, + 0x00041c00, 0x00031c03, 0x00051400, 0x00021403, 0x00621823, 0x18600002, + 0x3c026000, 0xac400808, 0x26274660, 0x94e2000e, 0x94e3000c, 0x24420001, + 0xa4e2000e, 0x3042ffff, 0x50430001, 0xa4e0000e, 0x12000005, 0x3c02000a, + 0x94e2000a, 0xa74200a2, 0x0a0010cc, 0x02401021, 0x03421821, 0x94640006, + 0x94e2000a, 0x00441023, 0x00021400, 0x00021c03, 0x04610006, 0xa4e40006, + 0x0000000d, 0x00000000, 0x2400005a, 0x0a0010ae, 0x24020001, 0x8f820014, + 0x0062102b, 0x14400002, 0x00001021, 0x24020001, 0x304200ff, 0x1040001b, + 0x3c020800, 0x3c06000a, 0x24454660, 0x94a8000a, 0x8f870014, 0x03461021, + 0x94430006, 0x00402021, 0xa4a30006, 0x94820006, 0xa4a20006, 0x01021023, + 0x00021400, 0x00021403, 0x04410006, 0x0047102b, 0x0000000d, 0x00000000, + 0x2400005a, 0x0a0010c8, 0x24020001, 0x14400002, 0x00001021, 0x24020001, + 0x304200ff, 0x1440ffec, 0x03461021, 0x02401021, 0x8fbf001c, 0x8fb20018, + 0x8fb10014, 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3c020800, 0x24454660, + 0x94a3001a, 0x8ca40024, 0x00403021, 0x000318c0, 0x00832021, 0xaf44003c, + 0x8ca20020, 0xaf420038, 0x3c020050, 0x34420008, 0xaf420030, 0x00000000, + 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, 0x00000000, + 0x8f430400, 0x24c64660, 0xacc30010, 0x8f420404, 0x3c030020, 0xacc20014, + 0xaf430030, 0x94c40018, 0x94c3001c, 0x94c2001a, 0x94c5001e, 0x00832021, + 0x24420001, 0xa4c2001a, 0x3042ffff, 0x14450002, 0xa4c40018, 0xa4c0001a, + 0x03e00008, 0x00000000, 0x8f820010, 0x3c030006, 0x00021140, 0x00431025, + 0xaf420030, 0x00000000, 0x00000000, 0x00000000, 0x27430400, 0x8f420000, + 0x30420010, 0x1040fffd, 0x00000000, 0xaf800010, 0xaf830018, 0x03e00008, + 0x00000000, 0x27bdffe8, 0xafb00010, 0x3c100800, 0x26104660, 0x3c05000a, + 0x02002021, 0x03452821, 0xafbf0014, 0x0e001128, 0x2406000a, 0x96020002, + 0x9603001e, 0x3042000f, 0x24420003, 0x00431804, 0x24027fff, 0x0043102b, + 0xaf830014, 0x10400004, 0x00000000, 0x0000000d, 0x00000000, 0x24000043, + 0x0e0010d2, 0x00000000, 0x8fbf0014, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a001137, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x3c036000, 0x8c642b7c, 0x3c036010, 0x8c6553fc, 0x00041582, + 0x00042302, 0x308403ff, 0x00052d82, 0x00441026, 0x0002102b, 0x0005282b, + 0x00451025, 0x1440000d, 0x3c020050, 0x34420004, 0xaf400038, 0xaf40003c, + 0xaf420030, 0x00000000, 0x00000000, 0x8f420000, 0x30420020, 0x1040fffd, + 0x3c020020, 0xaf420030, 0x0000000d, 0x03e00008, 0x00000000, 0x3c020050, + 0x34420004, 0xaf440038, 0xaf45003c, 0xaf420030, 0x00000000, 0x00000000, + 0x8f420000, 0x30420020, 0x1040fffd, 0x3c020020, 0xaf420030, 0x03e00008, + 0x00000000, 0x00000000 }; + +static u32 bnx2_COM_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwRodata[(0x18/4) + 1] = { + 0x08002318, 0x08002348, 0x08002378, 0x080023a8, 0x080023d8, 0x00000000, + 0x00000000 }; + +static u32 bnx2_COM_b06FwBss[(0x88/4) + 1] = { 0x00000000 }; +static u32 bnx2_COM_b06FwSbss[(0x1c/4) + 1] = { 0x00000000 }; + +static int bnx2_RXP_b06FwReleaseMajor = 0x0; +static int bnx2_RXP_b06FwReleaseMinor = 0x0; +static int bnx2_RXP_b06FwReleaseFix = 0x0; +static u32 bnx2_RXP_b06FwStartAddr = 0x08000060; +static u32 bnx2_RXP_b06FwTextAddr = 0x08000000; +static int bnx2_RXP_b06FwTextLen = 0x20b8; +static u32 bnx2_RXP_b06FwDataAddr = 0x080020e0; +static int bnx2_RXP_b06FwDataLen = 0x0; +static u32 bnx2_RXP_b06FwRodataAddr = 0x00000000; +static int bnx2_RXP_b06FwRodataLen = 0x0; +static u32 bnx2_RXP_b06FwBssAddr = 0x08002100; +static int bnx2_RXP_b06FwBssLen = 0x239c; +static u32 bnx2_RXP_b06FwSbssAddr = 0x080020e0; +static int bnx2_RXP_b06FwSbssLen = 0x14; + +static u32 bnx2_RXP_b06FwText[(0x20b8/4) + 1] = { + 0x0a000018, 0x00000000, 0x00000000, 0x0000000d, 0x72787020, 0x302e362e, + 0x39000000, 0x00060903, 0x00000000, 0x0000000d, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x10000003, 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, + 0x244220e0, 0x3c030800, 0x2463449c, 0xac400000, 0x0043202b, 0x1480fffd, + 0x24420004, 0x3c1d0800, 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100060, + 0x3c1c0800, 0x279c20e0, 0x0e000329, 0x00000000, 0x0000000d, 0x8f870008, + 0x2ce20080, 0x10400018, 0x3c030800, 0x24633490, 0x8f460100, 0x00072140, + 0x00831021, 0xac460000, 0x8f450104, 0x00641021, 0xac450004, 0x8f460108, + 0xac460008, 0x8f45010c, 0xac45000c, 0x8f460114, 0xac460010, 0x8f450118, + 0xac450014, 0x8f460124, 0xac460018, 0x8f450128, 0x00641821, 0x24e20001, + 0xaf820008, 0xac65001c, 0x03e00008, 0x00000000, 0x00804021, 0x8f830000, + 0x24070001, 0x3c020001, 0x00621024, 0x10400037, 0x00603021, 0x9742010e, + 0x3c038000, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000069, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x24020003, 0x30838000, 0x1060000d, 0xa7420188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600005, 0x00000000, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30c21000, + 0x1040000f, 0x00000000, 0x9742010c, 0x3042fc00, 0x5440000b, 0x24070005, + 0x3c021000, 0x00c21024, 0x10400007, 0x3c030dff, 0x3463ffff, 0x3c020e00, + 0x00c21024, 0x0062182b, 0x54600001, 0x24070005, 0x8f82000c, 0x30434000, + 0x10600016, 0x00404821, 0x3c020f00, 0x00c21024, 0x14400012, 0x00000000, + 0x93420116, 0x34424000, 0x03421821, 0x94650002, 0x2ca21389, 0x1040000b, + 0x3c020800, 0x24422100, 0x00051942, 0x00031880, 0x00621821, 0x30a5001f, + 0x8c640000, 0x24020001, 0x00a21004, 0x00822024, 0x01044025, 0x11000037, + 0x3c021000, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, 0x3045ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, + 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, + 0x9743011c, 0x9742011e, 0x0a0000cd, 0x00021400, 0x9743011e, 0x9742011c, + 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, + 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, + 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, + 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, + 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x03e00008, + 0x00001021, 0x00c21024, 0x104000ba, 0x3c020800, 0x8c430030, 0x1060003e, + 0x31224000, 0x1040003c, 0x3c030f00, 0x00c31824, 0x3c020100, 0x0043102b, + 0x14400038, 0x3c030800, 0x9742010e, 0x34e60002, 0x3c038000, 0x24420004, + 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, + 0x8f840004, 0x24020080, 0x24030002, 0xaf420180, 0xa743018c, 0x10800005, + 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000110, 0x00021400, 0x9743011e, + 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, + 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, + 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, + 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, + 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, + 0x03e00008, 0x00001021, 0x3c030800, 0x8c620024, 0x30420008, 0x1040003d, + 0x34e80002, 0x3c020f00, 0x00c21024, 0x5440003a, 0x3107ffff, 0x9742010c, + 0x30420200, 0x50400036, 0x3107ffff, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000153, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7460188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x3107ffff, 0x8f820000, 0x3c068000, 0x9743010e, 0x00021442, + 0x30440780, 0x24630004, 0x3065ffff, 0x8f4201b8, 0x00461024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf440180, 0xa742018c, + 0x10600005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000189, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00001021, 0x8f424000, 0x30420100, 0x104000ef, + 0x3c020800, 0x8c440024, 0x24030001, 0x14830036, 0x00404021, 0x9742010e, + 0x34e50002, 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, + 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0001c6, + 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, + 0x8f84000c, 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, + 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, + 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, + 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, + 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x30820001, 0x10400035, + 0x30e90004, 0x9742010e, 0x30e6fffb, 0x3c038000, 0x24420004, 0x3044ffff, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, + 0x24020002, 0xaf400180, 0xa742018c, 0x10600005, 0xa744018e, 0x9743011c, + 0x9742011e, 0x0a0001fe, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, + 0x00621825, 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, + 0x93420116, 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, + 0x14600004, 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, + 0x9743010c, 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, + 0xa74201a6, 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x30c7ffff, 0x8d020024, + 0x30420004, 0x10400037, 0x8d020024, 0x9742010e, 0x30e6fffb, 0x3c038000, + 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020003, + 0xa342018b, 0x8f840004, 0x24020100, 0x24030002, 0xaf420180, 0xa743018c, + 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, 0x0a000237, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x30c7ffff, 0x8d020024, 0x30420008, 0x10400034, 0x00000000, + 0x9742010e, 0x3c038000, 0x24420004, 0x3045ffff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f840004, 0x24020180, 0x24030002, + 0xaf420180, 0xa743018c, 0x10800005, 0xa745018e, 0x9743011c, 0x9742011e, + 0x0a00026f, 0x00021400, 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, + 0xaf4301a8, 0x8f84000c, 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, + 0x304200fc, 0x005a1021, 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, + 0x3c02ffff, 0x34427fff, 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, + 0x8f440104, 0x3042bfff, 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, + 0xaf4301ac, 0x3c021000, 0xaf4201b8, 0x15200046, 0x00001021, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, + 0xa7430188, 0x3c021000, 0xaf4201b8, 0x03e00008, 0x00001021, 0x3c030800, + 0x8c620024, 0x30420001, 0x10400035, 0x00001021, 0x9742010e, 0x34e50002, + 0x3c038000, 0x24420004, 0x3044ffff, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020003, 0xa342018b, 0x8f830004, 0x24020002, 0xaf400180, 0xa742018c, + 0x10600005, 0xa744018e, 0x9743011c, 0x9742011e, 0x0a0002b5, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7450188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x00001021, 0x03e00008, 0x00000000, 0x27bdffe0, 0xafbf0018, + 0xafb10014, 0xafb00010, 0x8f420140, 0xaf420020, 0x8f430148, 0x3c027000, + 0x00621824, 0x3c024000, 0x1062000c, 0x0043102b, 0x14400006, 0x3c025000, + 0x3c023000, 0x1062000b, 0x3c024000, 0x0a00031f, 0x00000000, 0x10620034, + 0x3c024000, 0x0a00031f, 0x00000000, 0x0e00067c, 0x00000000, 0x0a00031f, + 0x3c024000, 0x8f420148, 0x24030002, 0x3044ffff, 0x00021402, 0x305000ff, + 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, 0x24020003, 0x0600001d, + 0x36053000, 0x0a00030a, 0x3c038000, 0x12020007, 0x00000000, 0x0a000317, + 0x00000000, 0x0e000423, 0x00000000, 0x0a000308, 0x00402021, 0x0e000435, + 0x00000000, 0x00402021, 0x36053000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, 0xa6240010, 0x8f420144, + 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00031f, 0x3c024000, 0x0000000d, + 0x00000000, 0x240001c3, 0x0a00031f, 0x3c024000, 0x0e0007f7, 0x00000000, + 0x3c024000, 0xaf420178, 0x00000000, 0x8fbf0018, 0x8fb10014, 0x8fb00010, + 0x03e00008, 0x27bd0020, 0x24020800, 0x03e00008, 0xaf4201b8, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x34420200, 0xae021980, 0x8f500000, 0x32020003, 0x1040fffd, 0x32020001, + 0x10400004, 0x32020002, 0x0e0003bd, 0x00000000, 0x32020002, 0x1040fff6, + 0x00000000, 0x0e0002d4, 0x00000000, 0x0a00034a, 0x00000000, 0x27bdffe8, + 0x3c04600c, 0xafbf0014, 0xafb00010, 0x8c825000, 0x3c1a8000, 0x2403ff7f, + 0x3c106000, 0x00431024, 0x3442380c, 0x24030003, 0xac825000, 0x3c040008, + 0xaf430008, 0x8e020808, 0x3c030800, 0xac600020, 0x3042fff0, 0x2c420001, + 0xaf820004, 0x0e000819, 0x0344d825, 0x0e000781, 0x00000000, 0x3c020400, + 0x3442000c, 0x3c03ffff, 0x34630806, 0xae021948, 0xae03194c, 0x8e021980, + 0x8fbf0014, 0x34420200, 0xae021980, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x30a5ffff, 0x30c6ffff, 0x30e7ffff, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020003, 0xa342018b, 0x8f830004, 0xaf440180, 0xa745018c, + 0x10600005, 0xa746018e, 0x9743011c, 0x9742011e, 0x0a000393, 0x00021400, + 0x9743011e, 0x9742011c, 0x00021400, 0x00621825, 0xaf4301a8, 0x8f84000c, + 0x30828000, 0x1040000c, 0xa7470188, 0x93420116, 0x304200fc, 0x005a1021, + 0x24424004, 0x8c430000, 0x3063ffff, 0x14600004, 0x3c02ffff, 0x34427fff, + 0x00821024, 0xaf82000c, 0x9782000e, 0x9743010c, 0x8f440104, 0x3042bfff, + 0x00031c00, 0x3084ffff, 0x00641825, 0xa74201a6, 0xaf4301ac, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x24020002, 0x24032000, 0xa342018b, 0xa7430188, 0x3c021000, + 0xaf4201b8, 0x03e00008, 0x00000000, 0x27bdffe8, 0xafbf0010, 0x8f460128, + 0xaf460020, 0x8f420104, 0x8f450100, 0x24030800, 0x3c040010, 0xaf820000, + 0x00441024, 0xaf85000c, 0xaf4301b8, 0x14400005, 0x3c02001f, 0x3c030800, + 0x8c620020, 0x0a0003d5, 0x00002021, 0x3442ff00, 0x14c20009, 0x2402bfff, + 0x3c030800, 0x8c620020, 0x24040001, 0x24420001, 0x0e00004c, 0xac620020, + 0x0a0003e4, 0x00000000, 0x00a21024, 0x14400006, 0x00000000, 0xaf400048, + 0x0e000448, 0xaf400040, 0x0a0003e4, 0x00000000, 0x0e000783, 0x00000000, + 0x10400005, 0x3c024000, 0x8f430124, 0x3c026020, 0xac430014, 0x3c024000, + 0xaf420138, 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe0, + 0xafbf0018, 0xafb10014, 0xafb00010, 0x8f420148, 0x24030002, 0x3044ffff, + 0x00021402, 0x305000ff, 0x1203000c, 0x27510180, 0x2a020003, 0x10400005, + 0x24020003, 0x0600001d, 0x36053000, 0x0a00040e, 0x3c038000, 0x12020007, + 0x00000000, 0x0a00041b, 0x00000000, 0x0e000423, 0x00000000, 0x0a00040c, + 0x00402021, 0x0e000435, 0x00000000, 0x00402021, 0x36053000, 0x3c038000, + 0x8f4201b8, 0x00431024, 0x1440fffd, 0x24020002, 0xa6250008, 0xa222000b, + 0xa6240010, 0x8f420144, 0x3c031000, 0xae220024, 0xaf4301b8, 0x0a00041f, + 0x8fbf0018, 0x0000000d, 0x00000000, 0x240001c3, 0x8fbf0018, 0x8fb10014, + 0x8fb00010, 0x03e00008, 0x27bd0020, 0x3084ffff, 0x2c821389, 0x1040000d, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x8ca40000, 0x24030001, 0x00c31804, 0x00832025, 0x03e00008, + 0xaca40000, 0x03e00008, 0x24020091, 0x3084ffff, 0x2c821389, 0x1040000e, + 0x00001021, 0x3c030800, 0x24632100, 0x00042942, 0x00052880, 0x00a32821, + 0x3086001f, 0x24030001, 0x8ca40000, 0x00c31804, 0x00031827, 0x00832024, + 0x03e00008, 0xaca40000, 0x03e00008, 0x24020091, 0x27bdffb0, 0x3c026000, + 0xafbf0048, 0x8c434448, 0xaf630140, 0x93620005, 0x30420001, 0x14400005, + 0x00000000, 0x0e0007ed, 0x00000000, 0x0a00067a, 0x8fbf0048, 0x93420116, + 0x93430112, 0x8f430104, 0x3c040020, 0x34424000, 0x00641824, 0x1060000d, + 0x03426021, 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x24040008, + 0x240340c1, 0xa4430008, 0x24030002, 0xa043000b, 0x3c031000, 0x0a000563, + 0xa044000a, 0x8f420104, 0x3c030040, 0x00431024, 0x10400007, 0x00000000, + 0x8f430128, 0x27420180, 0xac430000, 0x8f650040, 0x0a00055c, 0x24040010, + 0xaf400048, 0xaf400054, 0xaf400040, 0x8f630048, 0x8f620040, 0x00624823, + 0x05210004, 0x00000000, 0x0000000d, 0x00000000, 0x24000132, 0x9742011a, + 0x3046ffff, 0x10c00004, 0x8d880004, 0x01061021, 0x0a000487, 0x2445ffff, + 0x01002821, 0x918a000d, 0xa7a00020, 0xafa00028, 0x9364003f, 0x3c026000, + 0x8c434448, 0x308700ff, 0x31420004, 0x10400033, 0xaf630144, 0x24090012, + 0x14e90006, 0x3c040800, 0x8c830028, 0x24020001, 0x24630001, 0x0a00054e, + 0xac830028, 0x8f620044, 0x15020012, 0x97a20020, 0x27a60010, 0x27450180, + 0x3442001a, 0xa7a20020, 0x8f630040, 0x3c048000, 0x24020020, 0xa3a70022, + 0xa3a90023, 0xa3a2001a, 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, + 0x00000000, 0x0a000533, 0x00000000, 0x8f620044, 0x01021023, 0x0440009e, + 0x24020001, 0x8f620048, 0x01021023, 0x0441009a, 0x24020001, 0x97a20020, + 0x27a60010, 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, + 0x00000000, 0x3c026000, 0x8c424448, 0xaf620148, 0x8f630040, 0x00685823, + 0x19600013, 0x00cb102a, 0x54400007, 0x314a00fe, 0x5566000c, 0x010b4021, + 0x31420001, 0x54400009, 0x010b4021, 0x314a00fe, 0x24020001, 0xa7a20020, + 0x8f630040, 0x00c05821, 0x00003021, 0x0a0004dd, 0xafa30028, 0x00cb1023, + 0x0a0004dd, 0x3046ffff, 0x00005821, 0x8f620048, 0x2442ffff, 0x00a21823, + 0x18600019, 0x0066102a, 0x14400013, 0x24020001, 0xa7a20020, 0x8f630040, + 0xafa30028, 0x8f620040, 0x55020005, 0x27a60010, 0x55200003, 0x27a60010, + 0x0a0004f6, 0x00c01821, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x8f650048, 0x00c31023, + 0x3046ffff, 0x314a00f6, 0x3c046000, 0x8c824448, 0x31430002, 0x1060001e, + 0xaf62014c, 0x8f620044, 0x1502000e, 0x97a20020, 0x27a60010, 0x34420200, + 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, 0x8f4201b8, + 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, 0x27a60010, + 0x34420001, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, 0xafa30028, + 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x0a000533, 0x00000000, + 0x3c026000, 0x8c424448, 0x31430010, 0xaf620150, 0x54600003, 0x8d890008, + 0x0a00054e, 0x24020001, 0x8f630054, 0x2522ffff, 0x00431023, 0x1840002a, + 0x24020001, 0x27a60010, 0xa7a20020, 0x8f630040, 0x27450180, 0x3c048000, + 0xafa30028, 0x8f4201b8, 0x00441024, 0x1440fffd, 0x00000000, 0x8f420128, + 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, 0xaca30018, 0x90c4000a, + 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, 0xa4a20010, 0x90c30012, + 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, 0xaca30014, 0x8cc20024, + 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc4002c, 0x24020001, 0x3c031000, + 0xaca4002c, 0xaf4301b8, 0xaf400044, 0xaf400050, 0x0a00067a, 0x8fbf0048, + 0x3c026000, 0x8c424448, 0x31430020, 0x10600019, 0xaf620154, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x24040004, 0x240340c1, 0xa4430008, + 0x24030002, 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, + 0xa0400012, 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, + 0xac450018, 0x0e0007ed, 0xaf4301b8, 0x0a00067a, 0x8fbf0048, 0x8f430104, + 0x8c824448, 0x38e3000a, 0x2c630001, 0xaf620158, 0x38e2000c, 0x2c420001, + 0x00621825, 0x14600003, 0x2402000e, 0x14e2002a, 0x00000000, 0x50c00008, + 0x9584000e, 0x10c00004, 0xa7a60040, 0x01061021, 0x0a000583, 0x2445ffff, + 0x01002821, 0x9584000e, 0x93630035, 0x8f62004c, 0x00642004, 0x00892021, + 0x00821023, 0x1840001f, 0x3c026000, 0x8f620018, 0x01021023, 0x1c40000f, + 0x97a20020, 0x8f620018, 0x15020018, 0x3c026000, 0x8f62001c, 0x01221023, + 0x1c400008, 0x97a20020, 0x8f62001c, 0x15220011, 0x3c026000, 0x8f620058, + 0x00821023, 0x1840000c, 0x97a20020, 0xafa50028, 0xafa80034, 0xafa90038, + 0xafa4003c, 0x34420020, 0x0a0005a8, 0xa7a20020, 0x8f680040, 0x00003021, + 0x8f640058, 0x01002821, 0x3c026000, 0x8c434448, 0xaf63015c, 0x8f62004c, + 0x01221023, 0x18400009, 0x00000000, 0x8f620054, 0x01221023, 0x1c400005, + 0x97a20020, 0xafa50028, 0xafa90024, 0x0a0005c3, 0x34420040, 0x9742011a, + 0x1440000c, 0x24020014, 0x8f620058, 0x14820009, 0x24020014, 0x8f63004c, + 0x8f620054, 0x10620004, 0x97a20020, 0xafa50028, 0x34420080, 0xa7a20020, + 0x24020014, 0x10e2000a, 0x28e20015, 0x10400005, 0x2402000c, 0x10e20006, + 0x3c026000, 0x0a000600, 0x00000000, 0x24020016, 0x14e20031, 0x3c026000, + 0x8f620054, 0x24420001, 0x1522002d, 0x3c026000, 0x24020014, 0x10e2001e, + 0x28e20015, 0x10400005, 0x2402000c, 0x10e20008, 0x3c026000, 0x0a000600, + 0x00000000, 0x24020016, 0x10e2000c, 0x97a20020, 0x0a000600, 0x3c026000, + 0x97a30020, 0x2402000e, 0xafa50028, 0xa3a70022, 0xa3a20023, 0xafa90024, + 0x34630054, 0x0a0005ff, 0xa7a30020, 0x24030010, 0x24040002, 0xafa50028, + 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0xafa90024, 0x0a0005fe, 0x3442005d, + 0x97a20020, 0x24030012, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, + 0xa3a4001a, 0xafa90024, 0x3042fffe, 0x3442005c, 0xa7a20020, 0x3c026000, + 0x8c434448, 0x31420001, 0xaf630160, 0x1040002c, 0x2402000c, 0x10e20014, + 0x28e2000d, 0x10400005, 0x2402000a, 0x10e20008, 0x97a20020, 0x0a000631, + 0x3c026000, 0x2402000e, 0x10e20018, 0x3c026000, 0x0a000631, 0x00000000, + 0x24030008, 0x24040002, 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, + 0x0a00062f, 0x34420013, 0x97a30020, 0x30620004, 0x1440000b, 0x97a20020, + 0x3462001b, 0xa7a20020, 0x24020016, 0x24030002, 0xafa50028, 0xa3a70022, + 0xa3a20023, 0x0a000630, 0xa3a3001a, 0x97a20020, 0x24030010, 0x24040002, + 0xafa50028, 0xa3a70022, 0xa3a30023, 0xa3a4001a, 0x3442001b, 0xa7a20020, + 0x3c026000, 0x8c434448, 0x31420009, 0x0002102b, 0x00021023, 0x30420007, + 0x34440003, 0xaf630164, 0x10c00016, 0x24030800, 0x8f820010, 0x27450180, + 0x24420001, 0xaf820010, 0x24020004, 0xaf4301b8, 0xa4a40008, 0xa0a2000b, + 0x93440120, 0x3c031000, 0xa4a6000e, 0xaca90024, 0xaca80028, 0x008b2021, + 0xa4a4000c, 0xaf4301b8, 0x97a20020, 0x00003021, 0x3042ffbf, 0x0a000650, + 0xa7a20020, 0x24060001, 0x3c026000, 0x8c434448, 0xaf630168, 0x97a20020, + 0x10400020, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8fa30028, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x93a4001a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x97a20020, + 0xa4a20010, 0x93a30022, 0xa0a30012, 0x93a20023, 0xa0a20013, 0x8fa30024, + 0xaca30014, 0x8fa20034, 0xaca20024, 0x8fa30038, 0xaca30028, 0x8fa2003c, + 0x3c031000, 0xaca2002c, 0xaf4301b8, 0x3c026000, 0x8c434448, 0x00c01021, + 0xaf63016c, 0x8fbf0048, 0x03e00008, 0x27bd0050, 0x8f460140, 0x8f470148, + 0x3c028000, 0x00e24024, 0x00072c02, 0x30a300ff, 0x2402000b, 0x1062008f, + 0x27440180, 0x2862000c, 0x10400011, 0x24020006, 0x1062005a, 0x28620007, + 0x10400007, 0x24020008, 0x10600024, 0x24020001, 0x10620037, 0x00000000, + 0x0a00077e, 0x00000000, 0x106200a9, 0x24020009, 0x106200bb, 0x00071c02, + 0x0a00077e, 0x00000000, 0x2402001b, 0x106200c7, 0x2862001c, 0x10400007, + 0x2402000e, 0x106200b1, 0x24020019, 0x106200c2, 0x00071c02, 0x0a00077e, + 0x00000000, 0x24020080, 0x10620060, 0x28620081, 0x10400005, 0x2402001c, + 0x10620094, 0x00071c02, 0x0a00077e, 0x00000000, 0x240200c2, 0x106200c5, + 0x00a01821, 0x0a00077e, 0x00000000, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, 0xac860000, + 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, 0x3c021000, + 0xac800028, 0xac830024, 0x3c036000, 0xaf4201b8, 0x03e00008, 0xac600808, + 0x11000009, 0x00a01821, 0x3c020800, 0x24030002, 0xa0434490, 0x24424490, + 0xac460008, 0x8f430144, 0x03e00008, 0xac430004, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, 0xac860004, 0xa4830008, + 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, 0x8f420144, 0x3c031000, + 0xac820028, 0x3c026000, 0xaf4301b8, 0x03e00008, 0xac400808, 0x00a01821, + 0x3c080800, 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x00000000, + 0xac860000, 0x91024490, 0x00002821, 0x10400002, 0x25064490, 0x8cc50008, + 0xac850004, 0xa4830008, 0x91034490, 0x24020002, 0xa082000b, 0xa4870010, + 0x34630001, 0xa083000a, 0x8f420144, 0xac820024, 0x91034490, 0x10600002, + 0x00001021, 0x8cc20004, 0xac820028, 0x3c021000, 0xaf4201b8, 0x3c026000, + 0xa1004490, 0x03e00008, 0xac400808, 0x00a01821, 0x3c058000, 0x8f4201b8, + 0x00451024, 0x1440fffd, 0x24020002, 0xa082000b, 0xa4830008, 0xa4870010, + 0x8f420144, 0x3c031000, 0xa4820012, 0x03e00008, 0xaf4301b8, 0x30e2ffff, + 0x14400028, 0x00071c02, 0x93620005, 0x30420004, 0x14400020, 0x3c029000, + 0x34420001, 0x00c21025, 0xaf420020, 0x3c038000, 0x8f420020, 0x00431024, + 0x1440fffd, 0x00000000, 0x93620005, 0x3c038000, 0x34630001, 0x00c31825, + 0x34420004, 0xa3620005, 0xaf430020, 0x93620005, 0x30420004, 0x14400003, + 0x3c038000, 0x0000000d, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x24020005, 0x3c031000, 0xac860000, 0xa082000b, 0xaf4301b8, 0x0a00073d, + 0x00071c02, 0x0000000d, 0x03e00008, 0x00000000, 0x00071c02, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, 0x24030002, + 0xac860000, 0xac800004, 0xa082000a, 0xa083000b, 0xa4870010, 0x8f430144, + 0x3c021000, 0xac800028, 0xac830024, 0x03e00008, 0xaf4201b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac800000, + 0xac860004, 0xa4830008, 0xa082000a, 0xa082000b, 0xa4870010, 0xac800024, + 0x8f420144, 0x3c031000, 0xac820028, 0x03e00008, 0xaf4301b8, 0x00071c02, + 0x3c058000, 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020001, 0xa4830008, + 0x24030002, 0xa082000a, 0x3c021000, 0xac860000, 0xac800004, 0xa083000b, + 0xa4870010, 0xac800024, 0xac800028, 0x03e00008, 0xaf4201b8, 0x3c058000, + 0x8f4201b8, 0x00451024, 0x1440fffd, 0x24020002, 0xac860000, 0xac800004, + 0xa4830008, 0xa080000a, 0x0a000748, 0xa082000b, 0x0000000d, 0x03e00008, + 0x00000000, 0x03e00008, 0x00000000, 0x8f420100, 0x3042003e, 0x14400011, + 0x24020001, 0xaf400048, 0x8f420100, 0x304207c0, 0x10400005, 0x00000000, + 0xaf40004c, 0xaf400050, 0x03e00008, 0x24020001, 0xaf400054, 0xaf400040, + 0x8f420100, 0x30423800, 0x54400001, 0xaf400044, 0x24020001, 0x03e00008, + 0x00000000, 0x3c029000, 0x34420001, 0x00822025, 0xaf440020, 0x3c038000, + 0x8f420020, 0x00431024, 0x1440fffd, 0x00000000, 0x03e00008, 0x00000000, + 0x3c028000, 0x34420001, 0x00822025, 0x03e00008, 0xaf440020, 0x8f430128, + 0x27420180, 0xac430000, 0x8f650040, 0x240340c1, 0xa4430008, 0x24030002, + 0xa044000a, 0x24040008, 0xa043000b, 0x3c031000, 0xa4440010, 0xa0400012, + 0xa0400013, 0xac400014, 0xac400024, 0xac400028, 0xac40002c, 0xac450018, + 0x03e00008, 0xaf4301b8, 0x24020001, 0xacc40000, 0x03e00008, 0xa4e50000, + 0x03e00008, 0x24020001, 0x24020001, 0xaf400044, 0x03e00008, 0xaf400050, + 0x00803021, 0x27450180, 0x3c038000, 0x8f4201b8, 0x00431024, 0x1440fffd, + 0x00000000, 0x8f420128, 0xaca20000, 0x8cc30018, 0x240240c1, 0xa4a20008, + 0xaca30018, 0x90c4000a, 0x24020002, 0xa0a2000b, 0xa0a4000a, 0x94c20010, + 0xa4a20010, 0x90c30012, 0xa0a30012, 0x90c20013, 0xa0a20013, 0x8cc30014, + 0xaca30014, 0x8cc20024, 0xaca20024, 0x8cc30028, 0xaca30028, 0x8cc2002c, + 0x3c031000, 0xaca2002c, 0x24020001, 0xaf4301b8, 0xaf400044, 0x03e00008, + 0xaf400050, 0x27bdffe8, 0xafbf0010, 0x0e000326, 0x00000000, 0x00002021, + 0x0e00004c, 0xaf400180, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f460148, + 0x27450180, 0x3c038000, 0x00061402, 0x304700ff, 0x8f4201b8, 0x00431024, + 0x1440fffd, 0x00000000, 0x8f440140, 0x00061202, 0x304200ff, 0x00061c02, + 0xaca20004, 0x24020002, 0xa4a30008, 0x30c300ff, 0xa0a2000b, 0xaca30024, + 0x10e0000a, 0xaca40000, 0x28e20004, 0x14400005, 0x24020001, 0x24020005, + 0x54e20005, 0xa0a0000a, 0x24020001, 0x0a000816, 0xa0a2000a, 0xa0a0000a, + 0x3c021000, 0x03e00008, 0xaf4201b8, 0x03e00008, 0x00001021, 0x10c00007, + 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, 0x14c0fffb, + 0x24840004, 0x03e00008, 0x00000000, 0x0a00082a, 0x00a01021, 0xac860000, + 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, 0x00000000, + 0x00000000 }; + +static u32 bnx2_RXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwBss[(0x239c/4) + 1] = { 0x00000000 }; +static u32 bnx2_RXP_b06FwSbss[(0x14/4) + 1] = { 0x00000000 }; + +static u32 bnx2_rv2p_proc1[] = { + 0x00000008, 0xac000001, 0x0000000c, 0x2f800001, 0x00000010, 0x213f0004, + 0x00000010, 0x20bf002c, 0x00000010, 0x203f0143, 0x00000018, 0x8000fffd, + 0x00000010, 0xb1b8b017, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c380000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x00000008, 0x02000002, + 0x00000010, 0x91de0000, 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000010, 0x2c620002, + 0x00000018, 0x80000012, 0x0000000b, 0x2fdf0002, 0x0000000c, 0x1f800002, + 0x00000000, 0x2c070000, 0x00000018, 0x8000ffe6, 0x00000008, 0x02000002, + 0x0000000f, 0x42e0001c, 0x00000010, 0x91840a08, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x00000000, 0x00000000, 0x00000010, 0x91de0000, 0x00000018, 0x80000004, + 0x0000000c, 0x1f800002, 0x00000000, 0x00000000, 0x00000018, 0x8000ffd9, + 0x0000000c, 0x29800002, 0x0000000c, 0x1f800002, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000005, 0x00000018, 0x8000ffd4, 0x00000008, 0x02240030, + 0x00000018, 0x00040000, 0x00000018, 0x80000015, 0x00000018, 0x80000017, + 0x00000018, 0x8000001b, 0x00000018, 0x8000004c, 0x00000018, 0x8000008c, + 0x00000018, 0x8000000f, 0x00000018, 0x8000000e, 0x00000018, 0x8000000d, + 0x00000018, 0x8000000c, 0x00000018, 0x800000c2, 0x00000018, 0x8000000a, + 0x00000018, 0x80000009, 0x00000018, 0x80000008, 0x00000018, 0x800000fd, + 0x00000018, 0x80000006, 0x00000018, 0x80000005, 0x00000018, 0x800000ff, + 0x00000018, 0x80000104, 0x00000018, 0x80000002, 0x00000018, 0x80000098, + 0x00000018, 0x80000000, 0x0000000c, 0x1f800001, 0x00000000, 0x00000000, + 0x00000018, 0x8000ffba, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000002, 0x00000018, 0x8000ffb5, + 0x00000010, 0xb1a0b012, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, + 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80011c, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000f, 0x47600008, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000018, 0x80000013, + 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000010, 0x91d40000, 0x00000008, 0x2d80011c, + 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, + 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0d610000, 0x00000000, 0x02620000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x309a0000, 0x00000000, 0x31040000, + 0x00000000, 0x0c961800, 0x00000009, 0x0c99ffff, 0x00000004, 0xcc993400, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, 0x0000000c, 0x29800001, + 0x00000010, 0x00220002, 0x0000000c, 0x29520001, 0x0000000c, 0x29520000, + 0x00000008, 0x22000001, 0x0000000c, 0x1f800001, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000003, 0x00000018, 0x8000ff83, 0x00000010, 0xb1a0b01d, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000f, 0x47600008, 0x00000000, 0x060e0000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, + 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, + 0x00000000, 0x0d620000, 0x00000000, 0x0ce71800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963220, 0x00000008, 0x0f800000, + 0x00000018, 0x8000001e, 0x0000000f, 0x47600008, 0x0000000b, 0x2fdf0002, + 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, + 0x00000008, 0x2d80012c, 0x0000000f, 0x060e0001, 0x00000010, 0x001f0000, + 0x00000000, 0x0f580000, 0x00000010, 0x91de0000, 0x00000000, 0x0a640000, + 0x00000000, 0x0ae50000, 0x00000000, 0x0b670000, 0x00000000, 0x0d620000, + 0x00000000, 0x02630000, 0x0000000f, 0x47620010, 0x00000000, 0x0ce71800, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x311a0000, 0x00000000, 0x31840000, + 0x0000000b, 0xc20000ff, 0x00000002, 0x42040000, 0x00000001, 0x31620800, + 0x0000000f, 0x020e0010, 0x00000002, 0x31620800, 0x00000009, 0x0c99ffff, + 0x00000004, 0xcc993400, 0x00000010, 0xb1963202, 0x00000008, 0x0f800000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x0000000c, 0x61420006, + 0x00000008, 0x22000008, 0x00000000, 0x2adf0000, 0x00000008, 0x2a000004, + 0x00000018, 0x8000ff42, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91a0b008, 0x00000010, 0x91d40000, 0x0000000c, 0x31620018, + 0x00000008, 0x2d800001, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000008, 0xac000001, 0x00000018, 0x8000000e, 0x00000000, 0x0380b000, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c004000, 0x00000010, 0x91d40000, + 0x00000008, 0x2d800101, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x0000000c, 0x31620018, 0x00000008, 0x2d800001, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c000e00, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000008, 0x2a000007, + 0x00000018, 0x8000ff27, 0x00000010, 0xb1a0b016, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x03d80000, 0x00000000, 0x2c200000, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, + 0x00000008, 0x2d000000, 0x00000008, 0x2d800108, 0x00000008, 0x07000001, + 0x00000010, 0xb5de1c00, 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, + 0x0000000b, 0x2fdf0002, 0x00000000, 0x2c070000, 0x0000000c, 0x1f800001, + 0x00000010, 0x91de0000, 0x00000018, 0x8000ff11, 0x00000008, 0x2c8000b0, + 0x00000008, 0x2d000008, 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2adf0000, 0x00000008, 0x2a00000a, 0x00000018, 0x8000ff07, + 0x00000000, 0x82265600, 0x0000000f, 0x47220008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000008, 0x02800001, 0x00000007, 0x02851c00, + 0x00000008, 0x82850001, 0x00000000, 0x02840a00, 0x00000007, 0x42851c00, + 0x00000003, 0xc3aa5200, 0x00000000, 0x03b10e00, 0x00000010, 0x001f0000, + 0x0000000f, 0x0f280007, 0x00000007, 0x4b071c00, 0x00000000, 0x00000000, + 0x0000000f, 0x0a960003, 0x00000000, 0x0a955c00, 0x00000000, 0x4a005a00, + 0x00000000, 0x0c960a00, 0x00000009, 0x0c99ffff, 0x00000008, 0x0d00ffff, + 0x00000010, 0xb1963202, 0x00000008, 0x0f800005, 0x00000010, 0x00220020, + 0x00000000, 0x02a70000, 0x00000010, 0xb1850002, 0x00000008, 0x82850200, + 0x00000000, 0x02000000, 0x00000000, 0x03a60000, 0x00000018, 0x8000004e, + 0x00000000, 0x072b0000, 0x00000001, 0x878c1c00, 0x00000000, 0x870e1e00, + 0x00000000, 0x860c1e00, 0x00000000, 0x03061e00, 0x00000010, 0xb18e0003, + 0x00000018, 0x80000047, 0x00000018, 0x8000fffa, 0x00000010, 0x918c0003, + 0x00000010, 0xb1870002, 0x00000018, 0x80000043, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, + 0x00000000, 0x2b070000, 0x00000010, 0xb187000e, 0x00000008, 0x2a000008, + 0x00000018, 0x8000003b, 0x00000010, 0x91d40000, 0x00000000, 0x28d18c00, + 0x00000000, 0x2a860000, 0x00000000, 0x230c0000, 0x00000000, 0x2b070000, + 0x00000018, 0x8000fff8, 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, + 0x00000000, 0x2aab0000, 0x00000000, 0xa3265600, 0x00000000, 0x2b000000, + 0x0000000c, 0x1f800001, 0x00000008, 0x2a000008, 0x00000018, 0x8000fec8, + 0x00000010, 0x91d40000, 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, + 0x00000008, 0x2a000009, 0x00000018, 0x8000fec3, 0x00000010, 0x91d40000, + 0x0000000c, 0x29800001, 0x0000000c, 0x1f800001, 0x00000000, 0x29420000, + 0x00000008, 0x2a000002, 0x00000018, 0x8000febd, 0x00000018, 0x8000febc, + 0x00000010, 0xb1bcb016, 0x0000000b, 0x2fdf0002, 0x00000000, 0x03d80000, + 0x00000000, 0x2c3c0000, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800150, 0x00000000, 0x00000000, + 0x00000010, 0x205f0000, 0x00000008, 0x2c800000, 0x00000008, 0x2d000000, + 0x00000008, 0x2d800108, 0x00000008, 0x07000001, 0x00000010, 0xb5de1c00, + 0x00000010, 0x2c620002, 0x00000018, 0x8000000a, 0x0000000b, 0x2fdf0002, + 0x00000000, 0x2c070000, 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fea6, 0x00000008, 0x2c8000b0, 0x00000008, 0x2d000008, + 0x00000010, 0x91d40000, 0x00000008, 0x2d800108, 0x0000000c, 0x29800000, + 0x0000000c, 0x1f800000, 0x00000010, 0x91de0000, 0x00000000, 0x2adf0000, + 0x00000008, 0x2a000006, 0x00000018, 0x8000fe9c, 0x00000008, 0x03050004, + 0x00000006, 0x83040c00, 0x00000008, 0x02850200, 0x00000000, 0x86050c00, + 0x00000001, 0x860c0e00, 0x00000008, 0x02040004, 0x00000000, 0x02041800, + 0x00000000, 0x83871800, 0x00000018, 0x00020000 }; + +static u32 bnx2_rv2p_proc2[] = { + 0x00000000, 0x2a000000, 0x00000010, 0xb1d40000, 0x00000008, 0x02540003, + 0x00000018, 0x00040000, 0x00000018, 0x8000000a, 0x00000018, 0x8000000a, + 0x00000018, 0x8000000e, 0x00000018, 0x80000056, 0x00000018, 0x800001b9, + 0x00000018, 0x800001e1, 0x00000018, 0x8000019b, 0x00000018, 0x800001f9, + 0x00000018, 0x8000019f, 0x00000018, 0x800001a6, 0x00000018, 0x80000000, + 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffee, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000010, 0x001f0000, 0x00000000, 0x2f80aa00, + 0x00000000, 0x2a000000, 0x00000000, 0x0d610000, 0x00000000, 0x03620000, + 0x00000000, 0x2c400000, 0x00000000, 0x02638c00, 0x00000000, 0x26460000, + 0x00000010, 0x00420002, 0x00000008, 0x02040012, 0x00000010, 0xb9060836, + 0x00000000, 0x0f580000, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000000, 0x0b660000, 0x00000000, 0x0c000000, 0x00000000, 0x0b800000, + 0x00000010, 0x00420009, 0x00000008, 0x0cc60012, 0x00000008, 0x0f800003, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000008, 0x27110012, + 0x00000000, 0x66900000, 0x00000008, 0xa31b0012, 0x00000018, 0x80000008, + 0x00000000, 0x0cc60000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000000, 0x27110000, 0x00000000, 0x66900000, + 0x00000000, 0x231b0000, 0x00000010, 0xb197320e, 0x00000000, 0x25960000, + 0x00000000, 0x021b0000, 0x00000010, 0x001f0000, 0x00000008, 0x0f800003, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000000, 0x22c50800, + 0x00000010, 0x009f0000, 0x00000000, 0x27002200, 0x00000000, 0x26802000, + 0x00000000, 0x231b0000, 0x0000000c, 0x69520001, 0x00000018, 0x8000fff3, + 0x00000010, 0x01130002, 0x00000010, 0xb1980003, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800004, 0x00000008, 0x22000003, 0x00000008, 0x2c80000c, + 0x00000008, 0x2d00000c, 0x00000010, 0x009f0000, 0x00000000, 0x25960000, + 0x0000000c, 0x29800000, 0x00000000, 0x32140000, 0x00000000, 0x32950000, + 0x00000000, 0x33160000, 0x00000000, 0x31e32e00, 0x00000008, 0x2d800010, + 0x00000010, 0x20530000, 0x00000018, 0x8000ffac, 0x00000000, 0x23000000, + 0x00000000, 0x25e60000, 0x00000008, 0x2200000b, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000018, 0x8000ffa5, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000010, 0x001f0000, 0x00000000, 0x02700000, 0x00000000, 0x0d620000, + 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, 0x00000009, 0x076000ff, + 0x0000000f, 0x2c0e0007, 0x00000008, 0x2c800000, 0x00000008, 0x2d000064, + 0x00000008, 0x2d80011c, 0x00000009, 0x06420002, 0x0000000c, 0x61420001, + 0x00000000, 0x0f400000, 0x00000000, 0x02d08c00, 0x00000000, 0x23000000, + 0x00000004, 0x826da000, 0x00000000, 0x8304a000, 0x00000000, 0x22c50c00, + 0x00000000, 0x03760000, 0x00000004, 0x83860a00, 0x00000000, 0x83870c00, + 0x00000010, 0x91de0000, 0x00000000, 0x037c0000, 0x00000000, 0x837b0c00, + 0x00000001, 0x83060e00, 0x00000000, 0x83870c00, 0x00000000, 0x82850e00, + 0x00000010, 0xb1860016, 0x0000000f, 0x47610018, 0x00000000, 0x068e0000, + 0x0000000f, 0x47670010, 0x0000000f, 0x47e20010, 0x00000000, 0x870e1e00, + 0x00000010, 0xb70e1a10, 0x00000010, 0x0ce7000e, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x8000023f, 0x00000000, 0x37ed0000, 0x0000000c, 0x73e7001a, + 0x00000010, 0x20530000, 0x00000008, 0x22000008, 0x0000000c, 0x61420004, + 0x00000000, 0x02f60000, 0x00000004, 0x82840a00, 0x00000010, 0xb1840a2b, + 0x00000010, 0x2d67000a, 0x00000010, 0xb96d0804, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x37ed0000, 0x00000018, 0x80000029, 0x0000000c, 0x61420000, + 0x00000000, 0x37040000, 0x00000000, 0x37850000, 0x0000000c, 0x33e7001a, + 0x00000018, 0x80000024, 0x00000010, 0xb96d0809, 0x00000004, 0xb6ed0a00, + 0x00000000, 0x036d0000, 0x00000004, 0xb76e0c00, 0x00000010, 0x91ee0c1f, + 0x0000000c, 0x73e7001a, 0x00000004, 0xb6ef0c00, 0x00000000, 0x37ed0000, + 0x00000018, 0x8000001b, 0x0000000c, 0x61420000, 0x00000010, 0xb7ee0a05, + 0x00000010, 0xb96f0815, 0x00000003, 0xb76e0800, 0x00000004, 0xb7ef0a00, + 0x00000018, 0x80000015, 0x00000010, 0x0ce7000c, 0x00000008, 0x22000009, + 0x00000000, 0x286d0000, 0x0000000f, 0x65680010, 0x00000003, 0xf66c9400, + 0x00000010, 0xb972a003, 0x0000000c, 0x73e70019, 0x0000000c, 0x21420004, + 0x00000018, 0x80000215, 0x00000010, 0x20530000, 0x00000008, 0x22000008, + 0x0000000c, 0x61420004, 0x00000000, 0x37040000, 0x00000000, 0x37850000, + 0x00000000, 0x036d0000, 0x00000003, 0xb8f10c00, 0x00000018, 0x80000004, + 0x00000000, 0x02840000, 0x00000002, 0x21421800, 0x0000000c, 0x61420000, + 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, + 0x00000000, 0x23000000, 0x00000010, 0xb1840a3d, 0x00000010, 0x01420002, + 0x00000004, 0xb8f10a00, 0x00000003, 0x83760a00, 0x00000010, 0xb8040c39, + 0x00000010, 0xb7e6080a, 0x00000000, 0x0a640000, 0x00000000, 0x0ae50000, + 0x00000009, 0x0c68ffff, 0x00000009, 0x0b67ffff, 0x00000000, 0x0be60000, + 0x00000000, 0x0c840000, 0x00000010, 0xb197320c, 0x00000008, 0x0f800002, + 0x00000018, 0x8000000a, 0x00000000, 0x0a6a0000, 0x00000000, 0x0aeb0000, + 0x00000000, 0x0c000000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0be90000, + 0x00000000, 0x0c840000, 0x00000010, 0xb1973203, 0x00000008, 0x0f800002, + 0x00000018, 0x80000001, 0x00000010, 0x001f0000, 0x00000000, 0x0c860000, + 0x00000000, 0x06980000, 0x00000008, 0x0f800003, 0x00000000, 0x00000000, + 0x00000010, 0x009f0000, 0x00000010, 0xb1973210, 0x00000000, 0x231b0000, + 0x00000000, 0x02043600, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000018, 0x800001de, 0x00000000, 0x06980000, + 0x00000010, 0x20530000, 0x00000000, 0x22c58c00, 0x00000010, 0x001f0000, + 0x00000008, 0x0f800003, 0x00000018, 0x8000fff0, 0x00000000, 0x02043600, + 0x00000000, 0x231b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27111a00, 0x00000000, 0x66900000, + 0x0000000c, 0x29000000, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000000, 0x32140000, 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, + 0x00000005, 0x74683000, 0x00000000, 0x33170000, 0x00000018, 0x80000138, + 0x00000010, 0x91c60004, 0x00000008, 0x07000004, 0x00000010, 0xb1c41c02, + 0x00000010, 0x91840a04, 0x00000018, 0x800001c3, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000010, 0xb1840a8e, 0x0000000c, 0x21420006, + 0x00000010, 0x0ce7001a, 0x0000000f, 0x43680010, 0x00000000, 0x03f30c00, + 0x00000010, 0x91870850, 0x0000000f, 0x46ec0010, 0x00000010, 0xb68d0c4e, + 0x00000000, 0x838d0c00, 0x00000000, 0xa3050800, 0x00000001, 0xa3460e00, + 0x00000000, 0x02048c00, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000010, 0x001f0000, 0x00000008, 0x22000008, 0x00000003, 0x8384a000, + 0x0000000f, 0x65870010, 0x00000009, 0x2607ffff, 0x00000000, 0x27750c00, + 0x00000000, 0x66f40000, 0x0000000c, 0x29000000, 0x00000018, 0x800001aa, + 0x00000000, 0x03068c00, 0x00000003, 0xf4680c00, 0x00000010, 0x20530000, + 0x00000000, 0x22c58c00, 0x00000018, 0x8000ffe5, 0x00000000, 0x39760000, + 0x00000000, 0x39840000, 0x0000000c, 0x33e70019, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x0760fe00, 0x0000000f, 0x0f0e0007, + 0x00000000, 0x83850800, 0x00000000, 0x0a7d0000, 0x00000000, 0x0afe0000, + 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, 0x00000000, 0x0c000000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x28f30000, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000006, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x8000017e, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ffac, 0x00000010, 0x001f0000, + 0x00000000, 0x031e0000, 0x00000000, 0x83850800, 0x00000009, 0x076000ff, + 0x0000000f, 0x0f0e0007, 0x00000000, 0x0c000000, 0x00000000, 0x0a7d0000, + 0x00000000, 0x0afe0000, 0x00000000, 0x0b7f0000, 0x00000000, 0x0d7a0000, + 0x00000000, 0x0bfc0000, 0x00000000, 0x0c970e00, 0x00000008, 0x0f800003, + 0x0000000f, 0x47670010, 0x00000008, 0x070e0001, 0x0000000b, 0xc38000ff, + 0x00000002, 0x43870000, 0x00000001, 0x33e70e00, 0x0000000f, 0x038e0010, + 0x00000002, 0x33e70e00, 0x00000000, 0x39840000, 0x00000003, 0xb9720800, + 0x00000000, 0x28f30000, 0x0000000f, 0x65680010, 0x00000010, 0x009f0000, + 0x00000000, 0x02043600, 0x00000010, 0x91840a02, 0x00000002, 0x21421800, + 0x00000008, 0x22000007, 0x00000000, 0x231b0000, 0x00000000, 0x23ff0000, + 0x00000000, 0x241b0000, 0x00000003, 0x8384a000, 0x0000000f, 0x65870010, + 0x00000009, 0x2607ffff, 0x00000000, 0x27110000, 0x00000000, 0x26900000, + 0x0000000c, 0x29000000, 0x00000018, 0x80000145, 0x00000003, 0xf4683600, + 0x00000000, 0x3a100000, 0x00000000, 0x3a910000, 0x00000003, 0xf66c2400, + 0x00000010, 0x001f0000, 0x00000010, 0xb1923604, 0x00000008, 0x0f800004, + 0x00000000, 0x00000000, 0x00000010, 0x009f0000, 0x00000000, 0x3e170000, + 0x00000000, 0x3e940000, 0x00000000, 0x3f150000, 0x00000000, 0x3f960000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f060000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000018, 0x8000ff73, 0x00000010, 0x0ce70005, + 0x00000008, 0x2c80000c, 0x00000008, 0x2d000070, 0x00000008, 0x2d800010, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000018, 0x8000011d, + 0x00000000, 0x2c1e0000, 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, + 0x00000008, 0x2d800048, 0x00000000, 0x00000000, 0x00000010, 0x91de0000, + 0x00000018, 0x8000fe5d, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x00000000, 0x0f008000, 0x00000008, 0x0f800007, + 0x00000018, 0x80000006, 0x0000000c, 0x29800001, 0x00000000, 0x2a000000, + 0x00000010, 0x001f0000, 0x0000000f, 0x0f470007, 0x00000008, 0x0f800008, + 0x00000018, 0x80000119, 0x00000010, 0x20530000, 0x00000018, 0x8000fe4f, + 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, + 0x00000000, 0x2a000000, 0x00000009, 0x0261ffff, 0x0000000d, 0x70e10001, + 0x00000018, 0x80000101, 0x00000000, 0x2c400000, 0x00000008, 0x2c8000c4, + 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, 0x00000005, 0x70e10800, + 0x00000010, 0x91de0000, 0x00000018, 0x8000fe41, 0x0000000c, 0x29800001, + 0x00000010, 0x91de0000, 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, + 0x00000000, 0x02700000, 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, + 0x00000000, 0x2a000000, 0x00000000, 0x0f400000, 0x00000000, 0x2c400000, + 0x0000000c, 0x73e7001b, 0x00000010, 0x0ce7000e, 0x00000000, 0x286d0000, + 0x0000000f, 0x65ed0010, 0x00000009, 0x266dffff, 0x00000018, 0x80000069, + 0x00000008, 0x02000004, 0x00000010, 0x91c40803, 0x00000018, 0x800000f6, + 0x00000010, 0x20530000, 0x00000018, 0x800000e5, 0x00000008, 0x2c8000b8, + 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, 0x00000018, 0x80000005, + 0x00000008, 0x2c8000c4, 0x00000008, 0x2d00001c, 0x00000008, 0x2d800001, + 0x00000000, 0x00000000, 0x00000010, 0x205f0000, 0x00000008, 0x2c800048, + 0x00000008, 0x2d000068, 0x00000008, 0x2d800104, 0x00000000, 0x00000000, + 0x00000010, 0x91de0000, 0x00000000, 0x27f60000, 0x00000010, 0xb87a9e04, + 0x00000008, 0x2200000d, 0x00000018, 0x800000e2, 0x00000010, 0x20530000, + 0x00000018, 0x8000fe18, 0x0000000c, 0x29800001, 0x00000010, 0x91de0000, + 0x00000000, 0x2fd50000, 0x00000010, 0x001f0000, 0x00000000, 0x02700000, + 0x00000000, 0x0d620000, 0x00000000, 0xbb630800, 0x00000000, 0x2a000000, + 0x00000010, 0x0e670011, 0x00000000, 0x286d0000, 0x0000000f, 0x65ed0010, + 0x00000009, 0x266dffff, 0x00000004, 0xb8f1a000, 0x00000000, 0x0f400000, + 0x0000000c, 0x73e7001c, 0x00000018, 0x80000040, 0x00000008, 0x02000004, + 0x00000010, 0x91c40802, 0x00000018, 0x800000cd, 0x00000000, 0x2c1e0000, + 0x00000008, 0x2c8000b8, 0x00000008, 0x2d000010, 0x00000008, 0x2d800048, + 0x00000010, 0x20530000, 0x00000010, 0x91de0000, 0x00000018, 0x8000fdfe, + 0x0000000c, 0x29800001, 0x00000000, 0x03550000, 0x00000000, 0x06460000, + 0x00000000, 0x03d60000, 0x00000000, 0x2a000000, 0x0000000f, 0x0f480007, + 0x00000010, 0xb18c0027, 0x0000000f, 0x47420008, 0x00000009, 0x070e000f, + 0x00000008, 0x070e0008, 0x00000010, 0x001f0000, 0x00000008, 0x09000001, + 0x00000007, 0x09121c00, 0x00000003, 0xcbca9200, 0x00000000, 0x0b97a200, + 0x00000007, 0x4b171c00, 0x0000000f, 0x0a960003, 0x00000000, 0x0a959c00, + 0x00000000, 0x4a009a00, 0x00000008, 0x82120001, 0x00000001, 0x0c170800, + 0x00000000, 0x02180000, 0x00000000, 0x0c971800, 0x00000008, 0x0d00ffff, + 0x00000008, 0x0f800006, 0x0000000c, 0x29000000, 0x00000008, 0x22000001, + 0x00000000, 0x22c50c00, 0x00000010, 0x009f0000, 0x00000010, 0xb197320b, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x800000a4, 0x00000000, 0x02180000, 0x00000010, 0x20530000, + 0x00000000, 0x22c53600, 0x00000010, 0x001f0000, 0x00000008, 0x0f800006, + 0x00000018, 0x8000fff5, 0x00000010, 0x91870002, 0x00000008, 0x2200000a, + 0x00000000, 0x231b0000, 0x00000000, 0x27110800, 0x00000000, 0x66900000, + 0x00000018, 0x80000098, 0x00000008, 0x0200000a, 0x00000010, 0x91c40804, + 0x00000010, 0x02c20003, 0x00000010, 0x001f0000, 0x00000008, 0x0f800008, + 0x00000010, 0x20530000, 0x00000018, 0x8000fdc9, 0x00000000, 0x06820000, + 0x00000010, 0x001f0000, 0x00000010, 0x0ce70028, 0x00000000, 0x03720000, + 0x00000000, 0xa8760c00, 0x00000000, 0x0cf60000, 0x00000010, 0xb8723224, + 0x00000000, 0x03440000, 0x00000008, 0x22000010, 0x00000000, 0x03ca0000, + 0x0000000f, 0x65680010, 0x00000000, 0x0bcf0000, 0x00000000, 0x27f20000, + 0x00000010, 0xb7ef3203, 0x0000000c, 0x21420004, 0x0000000c, 0x73e70019, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x8000007e, + 0x00000004, 0xb9723200, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x0000000c, 0x61420004, 0x00000000, 0x25070000, 0x00000000, 0x27970000, + 0x00000000, 0x290e0000, 0x00000010, 0x0ce70010, 0x00000010, 0xb873320f, + 0x0000000f, 0x436c0010, 0x00000000, 0x03f30c00, 0x00000000, 0x03f30000, + 0x00000000, 0x83990e00, 0x00000001, 0x83860e00, 0x00000000, 0x83060e00, + 0x00000003, 0xf66c0c00, 0x00000000, 0x39f30e00, 0x00000000, 0x3af50e00, + 0x00000000, 0x7a740000, 0x0000000f, 0x43680010, 0x00000001, 0x83860e00, + 0x00000000, 0x83060e00, 0x00000003, 0xf4680c00, 0x00000000, 0x286d0000, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c54, 0x00000000, 0x0a6a0000, + 0x00000000, 0x0aeb0000, 0x00000009, 0x0b6cffff, 0x00000000, 0x0c000000, + 0x00000000, 0x0be90000, 0x00000003, 0x8cf6a000, 0x0000000c, 0x09800002, + 0x00000010, 0x009f0000, 0x00000010, 0xb8173209, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34970000, + 0x00000004, 0xb8f12e00, 0x00000010, 0x001f0000, 0x00000008, 0x0f800004, + 0x00000018, 0x8000fff7, 0x00000000, 0x03e90000, 0x00000010, 0xb8f6a01a, + 0x00000010, 0x20130019, 0x00000010, 0xb1f10e18, 0x00000000, 0x83973200, + 0x00000000, 0x38700e00, 0x00000000, 0xbb760e00, 0x00000000, 0x37d00000, + 0x0000000c, 0x73e7001a, 0x00000003, 0xb8f1a000, 0x00000000, 0x32140000, + 0x00000000, 0x32950000, 0x00000005, 0x73e72c00, 0x00000000, 0x33190000, + 0x00000005, 0x74680000, 0x00000010, 0x0ce7000d, 0x00000008, 0x22000009, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x0000000c, 0x73e70019, + 0x0000000f, 0x65680010, 0x0000000c, 0x21420004, 0x00000018, 0x8000003c, + 0x00000010, 0x20530000, 0x0000000c, 0x61420004, 0x00000000, 0x290e0000, + 0x00000018, 0x80000002, 0x00000010, 0x91973206, 0x00000000, 0x35140000, + 0x00000000, 0x35950000, 0x00000005, 0x766c2c00, 0x00000000, 0x34990000, + 0x00000004, 0xb8f13200, 0x00000000, 0x83690c00, 0x00000010, 0xb1860013, + 0x00000000, 0x28e90000, 0x00000008, 0x22000004, 0x00000000, 0x23ec0000, + 0x00000000, 0x03690000, 0x00000010, 0xb8660c07, 0x00000009, 0x036cffff, + 0x00000000, 0x326a0000, 0x00000000, 0x32eb0000, 0x00000005, 0x73e70c00, + 0x00000000, 0x33690000, 0x00000005, 0x74680000, 0x0000000c, 0x73e7001c, + 0x00000000, 0x03690000, 0x00000010, 0xb1f60c12, 0x00000010, 0xb1d00c11, + 0x0000000c, 0x21420005, 0x0000000c, 0x33e7001c, 0x00000018, 0x8000000e, + 0x00000010, 0x2e67000d, 0x00000000, 0x03690000, 0x00000010, 0xb1f60c0b, + 0x00000010, 0xb1d00c0a, 0x00000000, 0x03440000, 0x00000008, 0x2200000c, + 0x00000000, 0x07520000, 0x00000000, 0x29000000, 0x00000018, 0x80000015, + 0x0000000c, 0x33e7001c, 0x00000010, 0x20530000, 0x00000000, 0x22060000, + 0x00000000, 0x290e0000, 0x00000018, 0x000d0000, 0x00000000, 0x06820000, + 0x00000010, 0x2de7000d, 0x00000010, 0x0ce7000c, 0x00000000, 0x27f20000, + 0x00000010, 0xb96d9e0a, 0x00000000, 0xa86d9e00, 0x00000009, 0x0361ffff, + 0x00000010, 0xb7500c07, 0x00000008, 0x2200000f, 0x0000000f, 0x65680010, + 0x00000000, 0x29000000, 0x00000018, 0x80000004, 0x0000000c, 0x33e7001b, + 0x00000010, 0x20530000, 0x00000018, 0x000d0000, 0x00000000, 0x2b820000, + 0x00000010, 0x20d2002f, 0x00000010, 0x0052002e, 0x00000009, 0x054e0007, + 0x00000010, 0xb18a002c, 0x00000000, 0x050a8c00, 0x00000008, 0x850a0008, + 0x00000010, 0x918a0029, 0x00000003, 0xc5008800, 0x00000008, 0xa3460001, + 0x00000010, 0xb1c60007, 0x00000008, 0x22000001, 0x0000000c, 0x29800000, + 0x00000010, 0x20530000, 0x00000000, 0x274e8c00, 0x00000000, 0x66cd0000, + 0x00000000, 0x22c58c00, 0x00000008, 0x22000014, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x0000000c, 0x69520000, + 0x0000000c, 0x29800000, 0x00000010, 0x20530000, 0x00000003, 0x22c58e00, + 0x00000003, 0x23c58e00, 0x00000003, 0x22c58e00, 0x00000003, 0x26cd9e00, + 0x00000003, 0x27cd9e00, 0x00000003, 0x26cd9e00, 0x00000003, 0x274ea000, + 0x00000003, 0x284ea000, 0x00000003, 0x274ea000, 0x00000000, 0xa2c58c00, + 0x00000000, 0xa74e8c00, 0x00000000, 0xe6cd0000, 0x0000000f, 0x620a0010, + 0x00000008, 0x23460001, 0x0000000c, 0x29800000, 0x00000010, 0x20530000, + 0x0000000c, 0x29520000, 0x00000018, 0x80000002, 0x0000000c, 0x29800000, + 0x00000018, 0x00570000 }; + +static int bnx2_TPAT_b06FwReleaseMajor = 0x0; +static int bnx2_TPAT_b06FwReleaseMinor = 0x0; +static int bnx2_TPAT_b06FwReleaseFix = 0x0; +static u32 bnx2_TPAT_b06FwStartAddr = 0x08000858; +static u32 bnx2_TPAT_b06FwTextAddr = 0x08000800; +static int bnx2_TPAT_b06FwTextLen = 0x1314; +static u32 bnx2_TPAT_b06FwDataAddr = 0x08001b40; +static int bnx2_TPAT_b06FwDataLen = 0x0; +static u32 bnx2_TPAT_b06FwRodataAddr = 0x00000000; +static int bnx2_TPAT_b06FwRodataLen = 0x0; +static u32 bnx2_TPAT_b06FwBssAddr = 0x08001b90; +static int bnx2_TPAT_b06FwBssLen = 0x80; +static u32 bnx2_TPAT_b06FwSbssAddr = 0x08001b40; +static int bnx2_TPAT_b06FwSbssLen = 0x48; + +static u32 bnx2_TPAT_b06FwText[(0x1314/4) + 1] = { + 0x0a000216, 0x00000000, 0x00000000, 0x0000000d, 0x74706174, 0x20302e36, + 0x2e390000, 0x00060901, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x10000003, + 0x00000000, 0x0000000d, 0x0000000d, 0x3c020800, 0x24421b40, 0x3c030800, + 0x24631c10, 0xac400000, 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, + 0x37bd3ffc, 0x03a0f021, 0x3c100800, 0x26100858, 0x3c1c0800, 0x279c1b40, + 0x0e00051f, 0x00000000, 0x0000000d, 0x8f820024, 0x27bdffe8, 0xafbf0014, + 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, 0x2400015f, 0x8f82001c, + 0x8c450008, 0x24030800, 0xaf430178, 0x97430104, 0x3c020008, 0xaf420140, + 0x8f820034, 0x30420001, 0x10400006, 0x3070ffff, 0x24020002, 0x2603fffe, + 0xa7420146, 0x0a000246, 0xa7430148, 0xa7400146, 0x8f850034, 0x30a20020, + 0x0002102b, 0x00021023, 0x30460009, 0x30a30c00, 0x24020400, 0x14620002, + 0x34c40001, 0x34c40005, 0xa744014a, 0x3c020800, 0x8c440820, 0x3c030048, + 0x24020002, 0x00832025, 0x30a30006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000271, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a000269, 0x00821025, 0x0a000268, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000271, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x8f830030, 0x1060003f, 0x3c048000, + 0x8f421000, 0x00441024, 0x1040fffd, 0x00000000, 0x10600039, 0x00000000, + 0x8f421000, 0x3c030020, 0x00431024, 0x10400034, 0x00000000, 0x97421014, + 0x14400031, 0x00000000, 0x97421008, 0x8f84001c, 0x24420006, 0x00024082, + 0x00081880, 0x00643821, 0x8ce50000, 0x30430003, 0x30420001, 0x10400004, + 0x00000000, 0x0000000d, 0x0a0002b0, 0x00081080, 0x5460000f, 0x30a5ffff, + 0x3c06ffff, 0x00a62824, 0x0005182b, 0x00a61026, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x240001fc, 0x8ce20000, + 0x0a0002af, 0x00462825, 0x0005182b, 0x38a2ffff, 0x0002102b, 0x00621824, + 0x10600004, 0x00000000, 0x0000000d, 0x00000000, 0x24000206, 0x8ce20000, + 0x3445ffff, 0x00081080, 0x00441021, 0x3c030800, 0xac450000, 0x8c620840, + 0x24420001, 0xac620840, 0x8f820008, 0x10400003, 0x00000000, 0x0e000660, + 0x00000000, 0x8f840028, 0x02002821, 0x24820008, 0x30421fff, 0x24434000, + 0x0343d821, 0x30a30007, 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, + 0x24a20007, 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, + 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, + 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, 0x03421821, 0x3c021000, + 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, 0x27bd0018, 0x8f820024, + 0x27bdffe8, 0xafbf0014, 0x10400004, 0xafb00010, 0x0000000d, 0x00000000, + 0x24000249, 0x8f85001c, 0x24020001, 0xaf820024, 0x8ca70008, 0xa3800023, + 0x8f620004, 0x3c100800, 0x26041b90, 0x00021402, 0xa3820010, 0x304600ff, + 0x24c60005, 0x0e00064a, 0x00063082, 0x8f640004, 0x8f430108, 0x3c021000, + 0x00621824, 0xa7840020, 0x10600008, 0x00000000, 0x97420104, 0x93830023, + 0x2442ffec, 0x34630002, 0xa3830023, 0x0a000304, 0x3045ffff, 0x97420104, + 0x2442fff0, 0x3045ffff, 0x8f620004, 0x3042ffff, 0x2c420013, 0x14400004, + 0x00000000, 0x93820023, 0x34420001, 0xa3820023, 0x93830023, 0x24020001, + 0x10620009, 0x28620002, 0x14400014, 0x24020002, 0x10620012, 0x24020003, + 0x1062000a, 0x00000000, 0x0a000325, 0x00000000, 0x8f82001c, 0x8c43000c, + 0x3c04ffff, 0x00641824, 0x00651825, 0x0a000325, 0xac43000c, 0x8f82001c, + 0x8c430010, 0x3c04ffff, 0x00641824, 0x00651825, 0xac430010, 0x8f620004, + 0x3042ffff, 0x24420002, 0x00021083, 0xa3820038, 0x304500ff, 0x8f82001c, + 0x3c04ffff, 0x00052880, 0x00a22821, 0x8ca70000, 0x97820020, 0x97430104, + 0x00e42024, 0x24420002, 0x00621823, 0x00833825, 0xaca70000, 0x93840038, + 0x26061b90, 0x00041080, 0x00461021, 0x90430000, 0x3063000f, 0x00832021, + 0xa3840022, 0x308200ff, 0x3c04fff6, 0x24420003, 0x00021080, 0x00461021, + 0x8c450000, 0x93830022, 0x8f82001c, 0x3484ffff, 0x00a43824, 0x00031880, + 0x00621821, 0xaf850000, 0xac67000c, 0x93820022, 0x93830022, 0x8f84001c, + 0x24420003, 0x00021080, 0x00461021, 0x24630004, 0x00031880, 0xac470000, + 0x93820022, 0x00661821, 0x94670002, 0x00021080, 0x00441021, 0xac670000, + 0x24030010, 0xac470010, 0xa7430140, 0x24030002, 0xa7400142, 0xa7400144, + 0xa7430146, 0x97420104, 0x8f840034, 0x24030001, 0x2442fffe, 0x30840006, + 0xa7420148, 0x24020002, 0xa743014a, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020009, 0x0a000383, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020119, 0x0a00037d, 0x24030001, 0x0a00037c, + 0x3c020109, 0x3c020019, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000383, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x93820010, 0x24030008, 0x8f840030, 0x24420002, 0x30420007, + 0x00621823, 0x30630007, 0xaf83000c, 0x10800005, 0x3c038000, 0x8f421000, + 0x00431024, 0x1040fffd, 0x00000000, 0x8f820028, 0xaf820018, 0x24420010, + 0x30421fff, 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, + 0x3063ffff, 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, + 0x8f840004, 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, + 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, + 0x03e00008, 0x27bd0018, 0x8f820024, 0x27bdffe8, 0xafbf0014, 0x14400004, + 0xafb00010, 0x0000000d, 0x00000000, 0x240002db, 0x8f620004, 0x04410009, + 0x3c050800, 0x93820022, 0x8f830000, 0x24a41b90, 0xaf800024, 0x24420003, + 0x00021080, 0x00441021, 0xac430000, 0x93820038, 0x24a51b90, 0x93860010, + 0x3c040001, 0x27700008, 0x24420001, 0x00021080, 0x00451021, 0x8c430000, + 0x24c60005, 0x00063082, 0x00641821, 0x02002021, 0x0e00064a, 0xac430000, + 0x93840022, 0x3c057fff, 0x8f620004, 0x00042080, 0x00902021, 0x8c830004, + 0x34a5ffff, 0x00451024, 0x00621821, 0xac830004, 0x93850038, 0x3c07ffff, + 0x93840010, 0x00052880, 0x00b02821, 0x8ca30000, 0x97420104, 0x97860020, + 0x00671824, 0x00441021, 0x00461023, 0x3042ffff, 0x00621825, 0xaca30000, + 0x93830023, 0x24020001, 0x10620009, 0x28620002, 0x1440001a, 0x24020002, + 0x10620018, 0x24020003, 0x1062000d, 0x00000000, 0x0a000411, 0x00000000, + 0x93820010, 0x97430104, 0x8e04000c, 0x00621821, 0x2463fff2, 0x3063ffff, + 0x00872024, 0x00832025, 0x0a000411, 0xae04000c, 0x93820010, 0x97430104, + 0x8e040010, 0x00621821, 0x2463ffee, 0x3063ffff, 0x00872024, 0x00832025, + 0xae040010, 0x9783000e, 0x8f840034, 0x2402000a, 0xa7420140, 0xa7430142, + 0x93820010, 0xa7420144, 0xa7400146, 0x97430104, 0x30840006, 0x24020001, + 0xa7430148, 0xa742014a, 0x24020002, 0x1082000d, 0x2c820003, 0x10400005, + 0x24020004, 0x10800011, 0x3c020041, 0x0a000437, 0x00000000, 0x10820007, + 0x24020006, 0x1482000d, 0x3c020151, 0x0a000431, 0x24030001, 0x0a000430, + 0x3c020141, 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a000437, + 0x00000000, 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x8f820030, 0x93840010, 0x8f850028, 0x10400005, 0x3c038000, + 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x2483000a, 0x30620007, + 0x10400002, 0x24620007, 0x304303f8, 0x00a31021, 0x30421fff, 0xaf850018, + 0xaf820028, 0xaf420084, 0x97430104, 0x24424000, 0x0342d821, 0x3063ffff, + 0x30620007, 0x10400002, 0x24620007, 0x3043fff8, 0x8f820044, 0x8f840004, + 0x00431821, 0xaf82002c, 0x0064102b, 0xaf830044, 0x14400002, 0x00641023, + 0xaf820044, 0x8f840044, 0x34028000, 0x8fbf0014, 0x8fb00010, 0x00821021, + 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0xaf420178, 0x03e00008, + 0x27bd0018, 0x3c026000, 0x8c444448, 0x3c030800, 0xac64082c, 0x8f620000, + 0x97430104, 0x3c048000, 0x3046ffff, 0x3067ffff, 0x8f420178, 0x00441024, + 0x1440fffd, 0x2402000a, 0x30c30007, 0xa7420140, 0x24020008, 0x00431023, + 0x30420007, 0x24c3fffe, 0xa7420142, 0xa7430144, 0xa7400146, 0xa7470148, + 0x8f420108, 0x3c036000, 0x8f850034, 0x30420020, 0x0002102b, 0x00021023, + 0x30420009, 0x34420001, 0xa742014a, 0x8c644448, 0x3c020800, 0x30a50006, + 0xac440830, 0x24020002, 0x10a2000d, 0x2ca20003, 0x10400005, 0x24020004, + 0x10a00011, 0x3c020041, 0x0a0004a8, 0x00000000, 0x10a20007, 0x24020006, + 0x14a2000d, 0x3c020151, 0x0a0004a2, 0x24030001, 0x0a0004a1, 0x3c020141, + 0x3c020051, 0x24030001, 0xaf421000, 0xaf830030, 0x0a0004a8, 0x00000000, + 0xaf421000, 0xaf800030, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x8f820030, 0x24c30008, 0x10400006, 0x30e6ffff, 0x3c048000, 0x8f421000, + 0x00441024, 0x1040fffd, 0x00000000, 0x3c026000, 0x8c444448, 0x3065ffff, + 0x3c020800, 0x30a30007, 0x10600003, 0xac440834, 0x24a20007, 0x3045fff8, + 0x8f840028, 0x00851021, 0x30421fff, 0x24434000, 0x0343d821, 0x30c30007, + 0xaf840018, 0xaf820028, 0xaf420084, 0x10600002, 0x24c20007, 0x3046fff8, + 0x8f820044, 0x8f840004, 0x00461821, 0xaf82002c, 0x0064102b, 0xaf830044, + 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, 0x3c030800, + 0x8c650844, 0x00821021, 0x03421821, 0xaf83001c, 0xaf440080, 0x10a00006, + 0x2402000e, 0x93830043, 0x14620004, 0x3c021000, 0x2402043f, 0xa7420148, + 0x3c021000, 0x3c036000, 0xaf420178, 0x8c644448, 0x3c020800, 0x03e00008, + 0xac440838, 0x8f820034, 0x30424000, 0x10400005, 0x24020800, 0x0000000d, + 0x00000000, 0x24000405, 0x24020800, 0xaf420178, 0x97440104, 0x3c030008, + 0xaf430140, 0x8f820034, 0x30420001, 0x10400006, 0x3085ffff, 0x24020002, + 0x24a3fffe, 0xa7420146, 0x0a0004ff, 0xa7430148, 0xa7400146, 0x8f840028, + 0x2402000d, 0xa742014a, 0x24830008, 0x30631fff, 0x24624000, 0x0342d821, + 0x30a20007, 0xaf840018, 0xaf830028, 0xaf430084, 0x10400002, 0x24a20007, + 0x3045fff8, 0x8f820044, 0x8f840004, 0x00451821, 0xaf82002c, 0x0064102b, + 0xaf830044, 0x14400002, 0x00641023, 0xaf820044, 0x8f840044, 0x34028000, + 0x00821021, 0x03421821, 0x3c021000, 0xaf83001c, 0xaf440080, 0x03e00008, + 0xaf420178, 0x27bdffe8, 0x3c046008, 0xafbf0014, 0xafb00010, 0x8c825000, + 0x3c1a8000, 0x2403ff7f, 0x375b4000, 0x00431024, 0x3442380c, 0xac825000, + 0x8f430008, 0x3c100800, 0x37428000, 0x34630001, 0xaf430008, 0xaf82001c, + 0x3c02601c, 0xaf800028, 0xaf400080, 0xaf400084, 0x8c450008, 0x3c036000, + 0x8c620808, 0x3c040800, 0x3c030080, 0xac830820, 0x3042fff0, 0x38420010, + 0x2c420001, 0xaf850004, 0xaf820008, 0x0e00062f, 0x00000000, 0x8f420000, + 0x30420001, 0x1040fffb, 0x00000000, 0x8f440108, 0x30822000, 0xaf840034, + 0x10400004, 0x8e02083c, 0x24420001, 0x0a00059d, 0xae02083c, 0x30820200, + 0x10400027, 0x00000000, 0x97420104, 0x1040001c, 0x30824000, 0x14400005, + 0x00000000, 0x0e00022d, 0x00000000, 0x0a000592, 0x00000000, 0x8f620008, + 0x8f630000, 0x24020030, 0x00031e02, 0x306300f0, 0x10620007, 0x28620031, + 0x14400031, 0x24020040, 0x10620007, 0x00000000, 0x0a000592, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a000592, 0x00000000, 0x0e0003b8, 0x00000000, + 0x0a000592, 0x00000000, 0x30820040, 0x1440002d, 0x00000000, 0x0000000d, + 0x00000000, 0x240004a6, 0x0a00059d, 0x00000000, 0x8f430100, 0x24020d00, + 0x1462000f, 0x30820006, 0x97420104, 0x10400005, 0x30820040, 0x0e0004e9, + 0x00000000, 0x0a000592, 0x00000000, 0x1440001b, 0x00000000, 0x0000000d, + 0x00000000, 0x240004b8, 0x0a00059d, 0x00000000, 0x1040000e, 0x30821000, + 0x10400005, 0x00000000, 0x0e00065d, 0x00000000, 0x0a000592, 0x00000000, + 0x0e00046b, 0x00000000, 0x8f820040, 0x24420001, 0xaf820040, 0x0a00059d, + 0x00000000, 0x30820040, 0x14400004, 0x00000000, 0x0000000d, 0x00000000, + 0x240004cf, 0x8f420138, 0x3c034000, 0x00431025, 0xaf420138, 0x0a00053f, + 0x00000000, 0x3c046008, 0x8c835000, 0x3c1a8000, 0x2402ff7f, 0x375b4000, + 0x00621824, 0x3463380c, 0xac835000, 0x8f420008, 0x3c056000, 0x3c03601c, + 0x34420001, 0xaf420008, 0x37428000, 0xaf800028, 0xaf82001c, 0xaf400080, + 0xaf400084, 0x8c660008, 0x8ca20808, 0x3c040800, 0x3c030080, 0xac830820, + 0x3042fff0, 0x38420010, 0x2c420001, 0xaf860004, 0xaf820008, 0x03e00008, + 0x00000000, 0x3084ffff, 0x30820007, 0x10400002, 0x24820007, 0x3044fff8, + 0x8f820028, 0x00441821, 0x30631fff, 0x24644000, 0x0344d821, 0xaf820018, + 0xaf830028, 0x03e00008, 0xaf430084, 0x3084ffff, 0x30820007, 0x10400002, + 0x24820007, 0x3044fff8, 0x8f820044, 0x8f830004, 0x00442021, 0xaf82002c, + 0x0083102b, 0xaf840044, 0x14400002, 0x00831023, 0xaf820044, 0x8f820044, + 0x34038000, 0x00431821, 0x03432021, 0xaf84001c, 0x03e00008, 0xaf420080, + 0x8f830034, 0x24020002, 0x30630006, 0x1062000d, 0x2c620003, 0x50400005, + 0x24020004, 0x10600012, 0x3c020001, 0x0a000601, 0x00000000, 0x10620007, + 0x24020006, 0x1462000f, 0x3c020111, 0x0a0005f9, 0x00821025, 0x0a0005f8, + 0x3c020101, 0x3c020011, 0x00821025, 0x24030001, 0xaf421000, 0xaf830030, + 0x0a000601, 0x00000000, 0x00821025, 0xaf421000, 0xaf800030, 0x00000000, + 0x00000000, 0x00000000, 0x03e00008, 0x00000000, 0x8f820030, 0x10400005, + 0x3c038000, 0x8f421000, 0x00431024, 0x1040fffd, 0x00000000, 0x03e00008, + 0x00000000, 0x8f820034, 0x27bdffe8, 0x30424000, 0x14400005, 0xafbf0010, + 0x0e00022d, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x8f620008, 0x8f630000, + 0x24020030, 0x00031e02, 0x306300f0, 0x10620008, 0x28620031, 0x1440000d, + 0x8fbf0010, 0x24020040, 0x10620007, 0x00000000, 0x0a00062d, 0x00000000, + 0x0e0002dd, 0x00000000, 0x0a00062d, 0x8fbf0010, 0x0e0003b8, 0x00000000, + 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x8f84003c, 0x1080000f, 0x3c026000, + 0x8c430c3c, 0x30630fff, 0xaf830014, 0x14600011, 0x3082000f, 0x10400005, + 0x308200f0, 0x10400003, 0x30820f00, 0x14400006, 0x00000000, 0x0000000d, + 0x00000000, 0x2400050e, 0x03e00008, 0x00000000, 0x0000000d, 0x00000000, + 0x24000513, 0x03e00008, 0x00000000, 0xaf83003c, 0x03e00008, 0x00000000, + 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, 0xac820000, + 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000659, 0x00a01021, + 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, 0x03e00008, + 0x00000000, 0x0000000d, 0x03e00008, 0x00000000, 0x3c040800, 0x8c82084c, + 0x54400007, 0xac80084c, 0x8f820034, 0x24030400, 0x30420c00, 0x1443005b, + 0x00000000, 0xac80084c, 0x0000000d, 0x00000000, 0x2400003c, 0x3c026000, + 0x8c444448, 0x3c030800, 0xac640850, 0x24000043, 0x97420104, 0x3045ffff, + 0x000530c2, 0x24a2007f, 0x000239c2, 0x2400004e, 0x3c046020, 0x24030020, + 0xac830000, 0x8c820000, 0x30420020, 0x10400005, 0x3c036020, 0x8c620000, + 0x30420020, 0x1440fffd, 0x00000000, 0x3c026020, 0x8c430010, 0x24040001, + 0x0087102b, 0x30ea007f, 0x24abfffe, 0x10400010, 0x00034240, 0x3c056020, + 0x24090020, 0xaca90000, 0x8ca20000, 0x30420020, 0x10400006, 0x24840001, + 0x3c036020, 0x8c620000, 0x30420020, 0x1440fffd, 0x00000000, 0x0087102b, + 0x1440fff4, 0x00000000, 0x8f85001c, 0x3c026020, 0x8c430010, 0x3c046020, + 0x34848000, 0x006a1825, 0x01034025, 0x2400006b, 0x10c0000b, 0x00000000, + 0x8ca30000, 0x24a50004, 0x8ca20000, 0x24a50004, 0x24c6ffff, 0xac820000, + 0x24840004, 0xac830000, 0x14c0fff7, 0x24840004, 0x24000077, 0x3c020007, + 0x34427700, 0x3c036000, 0xac6223c8, 0xac6b23cc, 0xac6823e4, 0x24000086, + 0x3c046000, 0x3c038000, 0x8c8223f8, 0x00431024, 0x1440fffd, 0x3c021000, + 0x3c056000, 0x24030019, 0xaca223f8, 0xa743014a, 0x8ca44448, 0x3c020800, + 0xac440854, 0x03e00008, 0x00000000, 0x00000000 }; + +static u32 bnx2_TPAT_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwBss[(0x80/4) + 1] = { 0x00000000 }; +static u32 bnx2_TPAT_b06FwSbss[(0x48/4) + 1] = { 0x00000000 }; + +static int bnx2_TXP_b06FwReleaseMajor = 0x0; +static int bnx2_TXP_b06FwReleaseMinor = 0x0; +static int bnx2_TXP_b06FwReleaseFix = 0x0; +static u32 bnx2_TXP_b06FwStartAddr = 0x08002090; +static u32 bnx2_TXP_b06FwTextAddr = 0x08000000; +static int bnx2_TXP_b06FwTextLen = 0x3ffc; +static u32 bnx2_TXP_b06FwDataAddr = 0x08004020; +static int bnx2_TXP_b06FwDataLen = 0x0; +static u32 bnx2_TXP_b06FwRodataAddr = 0x00000000; +static int bnx2_TXP_b06FwRodataLen = 0x0; +static u32 bnx2_TXP_b06FwBssAddr = 0x08004060; +static int bnx2_TXP_b06FwBssLen = 0x194; +static u32 bnx2_TXP_b06FwSbssAddr = 0x08004020; +static int bnx2_TXP_b06FwSbssLen = 0x34; +static u32 bnx2_TXP_b06FwText[(0x3ffc/4) + 1] = { + 0x0a000824, 0x00000000, 0x00000000, 0x0000000d, 0x74787020, 0x302e362e, + 0x39000000, 0x00060900, 0x0000000a, 0x000003e8, 0x0000ea60, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x00000000, 0x10000003, 0x00000000, 0x0000000d, + 0x0000000d, 0x3c020800, 0x24424020, 0x3c030800, 0x246341f4, 0xac400000, + 0x0043202b, 0x1480fffd, 0x24420004, 0x3c1d0800, 0x37bd7ffc, 0x03a0f021, + 0x3c100800, 0x26102090, 0x3c1c0800, 0x279c4020, 0x0e000a0e, 0x00000000, + 0x0000000d, 0x8f840014, 0x27bdffe8, 0xafb00010, 0x8f460104, 0x8f830008, + 0x8c8500ac, 0xaf430080, 0x948200a8, 0xa7420e10, 0x948300aa, 0xa7430e12, + 0x8c8200ac, 0xaf420e18, 0x97430e10, 0xa7430e14, 0x97420e12, 0xa7420e16, + 0x8f430e18, 0x00005021, 0x00c53023, 0x10c001a3, 0xaf430e1c, 0x240f0800, + 0x3c0e1000, 0x2419fff8, 0x24100010, 0x3c188100, 0x93620008, 0x10400009, + 0x00000000, 0x97620010, 0x00c2102b, 0x14400005, 0x00000000, 0x97620010, + 0x3042ffff, 0x0a000862, 0xaf420e00, 0xaf460e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0x8f450e04, 0x3044ffff, 0x30820001, + 0x14400005, 0x00000000, 0x14a00005, 0x3083a040, 0x0a0009e6, 0x00000000, + 0x0000000d, 0x3083a040, 0x24020040, 0x14620049, 0x3082a000, 0x8f87000c, + 0x30880036, 0x30890008, 0xaf4f0178, 0x00e01821, 0x9742008a, 0x00431023, + 0x2442ffff, 0x30421fff, 0x2c420008, 0x1440fffa, 0x00000000, 0x8f830018, + 0x00a05021, 0x00c53023, 0x24e24000, 0x03422821, 0x306b00ff, 0x24630001, + 0xaf830018, 0x93840012, 0x000b1400, 0x3c030100, 0x00431025, 0xaca20000, + 0x8f820018, 0x30840007, 0x00042240, 0x34870001, 0x00e83825, 0x1120000f, + 0xaca20004, 0x97430e0a, 0x8f84000c, 0x00ee3825, 0x2402000e, 0x00781825, + 0xaf430160, 0x25430006, 0x24840008, 0x30841fff, 0xa742015a, 0xa7430158, + 0xaf84000c, 0x0a0008a9, 0x00000000, 0x8f83000c, 0x25420002, 0xa7420158, + 0x24630008, 0x30631fff, 0xaf83000c, 0x54c0000c, 0x8f420e14, 0x97420e10, + 0x97430e12, 0x8f840014, 0x00021400, 0x00621825, 0xac8300a8, 0x8f850014, + 0x8f420e18, 0x34e70040, 0xaca200ac, 0x8f420e14, 0x8f430e1c, 0xaf420144, + 0xaf430148, 0xa34b0152, 0xaf470154, 0x0a0009f1, 0xaf4e0178, 0x10400128, + 0x00000000, 0x97620010, 0x00a2102b, 0x10400003, 0x30820040, 0x10400122, + 0x00000000, 0xafa60008, 0xa7840010, 0xaf850004, 0x93620008, 0x1440005e, + 0x27ac0008, 0xaf60000c, 0x97820010, 0x30424000, 0x10400002, 0x2403000e, + 0x24030016, 0xa363000a, 0x24034007, 0xaf630014, 0x93820012, 0x8f630014, + 0x30420007, 0x00021240, 0x00621825, 0xaf630014, 0x97820010, 0x8f630014, + 0x30420010, 0x00621825, 0xaf630014, 0x97820010, 0x30420008, 0x5040000e, + 0x00002821, 0x8f620014, 0x004e1025, 0xaf620014, 0x97430e0a, 0x2402000e, + 0x00781825, 0xaf630004, 0xa3620002, 0x9363000a, 0x3405fffc, 0x24630004, + 0x0a0008f2, 0xa363000a, 0xaf600004, 0xa3600002, 0x97820010, 0x9363000a, + 0x30421f00, 0x00021182, 0x24420028, 0x00621821, 0xa3630009, 0x97420e0c, + 0xa7620010, 0x93630009, 0x24020008, 0x24630002, 0x30630007, 0x00431023, + 0x30420007, 0xa362000b, 0x93640009, 0x97620010, 0x8f890004, 0x97830010, + 0x00441021, 0x00a21021, 0x30630040, 0x10600006, 0x3045ffff, 0x15250005, + 0x0125102b, 0x3c068000, 0x0a000925, 0x00005821, 0x0125102b, 0x144000c8, + 0x00005021, 0x97420e14, 0xa7420e10, 0x97430e16, 0xa7430e12, 0x8f420e1c, + 0xaf420e18, 0xaf450e00, 0x8f420000, 0x30420008, 0x1040fffd, 0x00000000, + 0x97420e08, 0x00a04821, 0xa7820010, 0x8f430e04, 0x00003021, 0x240b0001, + 0xaf830004, 0x97620010, 0x0a000936, 0x304dffff, 0x8f890004, 0x97820010, + 0x30420040, 0x10400004, 0x01206821, 0x3c068000, 0x0a000936, 0x00005821, + 0x97630010, 0x8f820004, 0x144300a7, 0x00005021, 0x00003021, 0x240b0001, + 0x8d820000, 0x00491023, 0x1440000d, 0xad820000, 0x8f620014, 0x34420040, + 0xaf620014, 0x97430e10, 0x97420e12, 0x8f840014, 0x00031c00, 0x00431025, + 0xac8200a8, 0x8f830014, 0x8f420e18, 0xac6200ac, 0x93620008, 0x1440003f, + 0x00000000, 0x25260002, 0x8f84000c, 0x9743008a, 0x3063ffff, 0xafa30000, + 0x8fa20000, 0x00441023, 0x2442ffff, 0x30421fff, 0x2c420010, 0x1440fff7, + 0x00000000, 0x8f82000c, 0x8f830018, 0x00021082, 0x00021080, 0x24424000, + 0x03422821, 0x00605021, 0x24630001, 0x314200ff, 0x00021400, 0xaf830018, + 0x3c033200, 0x00431025, 0xaca20000, 0x93630009, 0x9362000a, 0x00031c00, + 0x00431025, 0xaca20004, 0x8f830018, 0xaca30008, 0x97820010, 0x30420008, + 0x10400002, 0x00c04021, 0x25280006, 0x97430e14, 0x93640002, 0x8f450e1c, + 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, 0x97420e16, + 0xa7420146, 0xaf450148, 0xa34a0152, 0x8f82000c, 0x308400ff, 0xa744015a, + 0xaf460160, 0xa7480158, 0xaf470154, 0xaf4e0178, 0x00501021, 0x30421fff, + 0xaf82000c, 0x0a0009c5, 0x8d820000, 0x93620009, 0x9363000b, 0x8f85000c, + 0x2463000a, 0x00435021, 0x25440007, 0x00992024, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x8f840018, 0x00021082, 0x00021080, + 0x24424000, 0x03422821, 0x00804021, 0x24840001, 0xaf840018, 0x93630009, + 0x310200ff, 0x00022400, 0x3c024100, 0x24630002, 0x00621825, 0x00832025, + 0xaca40000, 0x8f62000c, 0x00461025, 0xaca20004, 0x97430e14, 0x93640002, + 0x8f450e1c, 0x8f660004, 0x8f670014, 0xaf4f0178, 0x3063ffff, 0xa7430144, + 0x97420e16, 0x308400ff, 0xa7420146, 0xaf450148, 0xa3480152, 0x8f83000c, + 0x25420007, 0x00591024, 0xa744015a, 0xaf460160, 0xa7490158, 0xaf470154, + 0xaf4e0178, 0x00621821, 0x30631fff, 0xaf83000c, 0x8d820000, 0x14400005, + 0x00000000, 0x8f620014, 0x2403ffbf, 0x00431024, 0xaf620014, 0x8f62000c, + 0x004d1021, 0xaf62000c, 0x93630008, 0x14600008, 0x00000000, 0x11600006, + 0x00000000, 0x8f630014, 0x3c02efff, 0x3442fffe, 0x00621824, 0xaf630014, + 0xa36b0008, 0x01205021, 0x15400016, 0x8fa60008, 0x97420e14, 0x97430e16, + 0x8f850014, 0x00021400, 0x00621825, 0xaca300a8, 0x8f840014, 0x8f420e1c, + 0x0a0009f3, 0xac8200ac, 0x97420e14, 0x97430e16, 0x8f840014, 0x00021400, + 0x00621825, 0xac8300a8, 0x8f850014, 0x8f420e1c, 0x00005021, 0x0a0009f3, + 0xaca200ac, 0x14c0fe64, 0x00000000, 0x55400018, 0x8fb00010, 0x3c038000, + 0x8f420178, 0x00431024, 0x1440fffd, 0x00000000, 0x97430e14, 0x8f440e1c, + 0x24020800, 0xaf420178, 0x3063ffff, 0xa7430144, 0x97420e16, 0x3c031000, + 0xa7420146, 0x24020240, 0xaf440148, 0xa3400152, 0xa740015a, 0xaf400160, + 0xa7400158, 0xaf420154, 0xaf430178, 0x8fb00010, 0x03e00008, 0x27bd0018, + 0x27bdffd8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0020, 0xafb3001c, 0xafb20018, 0xafb10014, 0xafb00010, 0xaf830014, + 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, 0x00000000, 0x00000000, + 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, 0x8c835000, 0x24130d00, + 0x3c120800, 0x3c114000, 0x2402ff7f, 0x00621824, 0x3463380c, 0x24020009, + 0xac835000, 0xaf420008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, + 0x0e000a96, 0x00000000, 0x3c020800, 0x24504080, 0x8f420000, 0x30420001, + 0x1040fffd, 0x00000000, 0x8f440100, 0xaf840008, 0xaf440020, 0x93430108, + 0xa3830012, 0x93820012, 0x30420001, 0x10400008, 0x00000000, 0x93820012, + 0x30420006, 0x00021100, 0x0e00083b, 0x0050d821, 0x0a000a52, 0x00000000, + 0x14930005, 0x00000000, 0x0e00083b, 0x265b4100, 0x0a000a52, 0x00000000, + 0x0e000ba3, 0x00000000, 0xaf510138, 0x0a000a36, 0x00000000, 0x27bdfff8, + 0x3084ffff, 0x24820007, 0x3044fff8, 0x8f85000c, 0x9743008a, 0x3063ffff, + 0xafa30000, 0x8fa20000, 0x00451023, 0x2442ffff, 0x30421fff, 0x0044102b, + 0x1440fff7, 0x00000000, 0x8f82000c, 0x00021082, 0x00021080, 0x24424000, + 0x03421021, 0x03e00008, 0x27bd0008, 0x3084ffff, 0x8f82000c, 0x24840007, + 0x3084fff8, 0x00441021, 0x30421fff, 0xaf82000c, 0x03e00008, 0x00000000, + 0x27bdffe8, 0x3c1a8000, 0x3c0420ff, 0x3484fffd, 0x3c020008, 0x03421821, + 0xafbf0010, 0xaf830014, 0xaf440e00, 0x00000000, 0x00000000, 0x00000000, + 0x00000000, 0x00000000, 0x3c0200ff, 0x3442fffd, 0x3c046004, 0xaf420e00, + 0x8c825000, 0x2403ff7f, 0x00431024, 0x3442380c, 0x24030009, 0xac825000, + 0xaf430008, 0xaf800018, 0xaf80000c, 0x0e000fa1, 0x00000000, 0x0e000a96, + 0x00000000, 0x8fbf0010, 0x03e00008, 0x27bd0018, 0x27bdffe8, 0x3c02000a, + 0x03421821, 0x3c040800, 0x24844120, 0x24050018, 0xafbf0010, 0xaf830024, + 0x0e000fad, 0x00003021, 0x3c050800, 0x3c020800, 0x24423d60, 0xaca24180, + 0x24a54180, 0x3c020800, 0x24423e18, 0x3c030800, 0x24633e2c, 0x3c040800, + 0xaca20004, 0x3c020800, 0x24423d68, 0xaca30008, 0xac824190, 0x24844190, + 0x3c020800, 0x24423da4, 0x3c070800, 0x24e73de4, 0x3c060800, 0x24c63e40, + 0x3c050800, 0x24a52b28, 0x3c030800, 0xac820004, 0x3c020800, 0x24423e48, + 0xac870008, 0xac86000c, 0xac850010, 0xac6241b0, 0x246341b0, 0x8fbf0010, + 0x3c020800, 0x24423e60, 0xac620004, 0xac670008, 0xac66000c, 0xac650010, + 0x03e00008, 0x27bd0018, 0x27bdffc8, 0x3c020800, 0x24424120, 0xafbf0030, + 0xafb3002c, 0xafb20028, 0xafb10024, 0xafb00020, 0x90470021, 0x8c510008, + 0x8c45001c, 0x8f900020, 0x3c060800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8cc2414c, 0x24c3414c, 0x2473ffd4, 0xaf420144, 0x8e620030, + 0x30b22000, 0xaf420148, 0x3c021000, 0xaf50014c, 0xa3470152, 0xa7510158, + 0xaf450154, 0xaf420178, 0x12400004, 0x3c030800, 0x8c620030, 0x24420001, + 0xac620030, 0x93420109, 0x9344010a, 0x00111c00, 0xafa30018, 0x00071a00, + 0xafa50014, 0x8cc5414c, 0x00021600, 0x00042400, 0x00441025, 0x00431025, + 0xafa20010, 0x8f440100, 0x8e660030, 0x0e000fe1, 0x02003821, 0x1640000e, + 0x8fbf0030, 0x8f820000, 0x8e630030, 0x8c44017c, 0x02031823, 0x00711823, + 0x00641823, 0x2c630002, 0x14600006, 0x8fb3002c, 0x0000000d, 0x00000000, + 0x240000ca, 0x8fbf0030, 0x8fb3002c, 0x8fb20028, 0x8fb10024, 0x8fb00020, + 0x03e00008, 0x27bd0038, 0x974309da, 0x00804021, 0xad030000, 0x8f4209dc, + 0xad020004, 0x8f4309e0, 0xad030008, 0x934409d9, 0x24020001, 0x30840003, + 0x1082001f, 0x30a900ff, 0x28820002, 0x10400005, 0x24020002, 0x10800009, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x1082000b, 0x24020003, 0x10820026, + 0x3c0a0800, 0x0a000b64, 0x93420934, 0x974209e4, 0x00021400, 0x34420800, + 0xad02000c, 0x0a000b63, 0x25080010, 0x974209e4, 0x00021400, 0x34428100, + 0xad02000c, 0x974309e8, 0x3c0a0800, 0x00031c00, 0x34630800, 0xad030010, + 0x0a000b63, 0x25080014, 0x974409e4, 0x3c050800, 0x24a24120, 0x94430018, + 0x94460010, 0x9447000c, 0x00a05021, 0x24020800, 0xad000010, 0xad020014, + 0x00042400, 0x00661821, 0x00671823, 0x2463fff2, 0x00832025, 0xad04000c, + 0x0a000b63, 0x25080018, 0x974209e4, 0x3c050800, 0x00021400, 0x34428100, + 0xad02000c, 0x974409e8, 0x24a24120, 0x94430018, 0x94460010, 0x9447000c, + 0x00a05021, 0x24020800, 0xad000014, 0xad020018, 0x00042400, 0x00661821, + 0x00671823, 0x2463ffee, 0x00832025, 0xad040010, 0x2508001c, 0x93420934, + 0x93450921, 0x3c074000, 0x25444120, 0x94830014, 0x94860010, 0x00021082, + 0x00021600, 0x00052c00, 0x00a72825, 0x00451025, 0x00661821, 0x00431025, + 0xad020000, 0x97830028, 0x974209ea, 0x00621821, 0x00031c00, 0xad030004, + 0x97820028, 0x24420001, 0x30427fff, 0xa7820028, 0x93430920, 0x3c020006, + 0x00031e00, 0x00621825, 0xad030008, 0x8f42092c, 0xad02000c, 0x8f430930, + 0xad030010, 0x8f440938, 0x25080014, 0xad040000, 0x8f820020, 0x11200004, + 0xad020004, 0x8f420940, 0x0a000b8d, 0x2442ffff, 0x8f420940, 0xad020008, + 0x8f440948, 0x8f420940, 0x93430936, 0x00822823, 0x00652806, 0x3402ffff, + 0x0045102b, 0x54400001, 0x3405ffff, 0x93420937, 0x25444120, 0x90830020, + 0xad000010, 0x00021700, 0x34630010, 0x00031c00, 0x00431025, 0x00451025, + 0xad02000c, 0x03e00008, 0x25020014, 0x27bdffb0, 0x3c020008, 0x03421821, + 0xafbf004c, 0xafbe0048, 0xafb70044, 0xafb60040, 0xafb5003c, 0xafb40038, + 0xafb30034, 0xafb20030, 0xafb1002c, 0xafb00028, 0xaf830000, 0x24020040, + 0xaf420814, 0xaf400810, 0x8f420944, 0x8f430950, 0x8f440954, 0x8f45095c, + 0xaf820030, 0xaf830020, 0xaf84001c, 0xaf85002c, 0x93430900, 0x24020020, + 0x10620005, 0x24020030, 0x10620022, 0x3c030800, 0x0a000bf1, 0x8c62002c, + 0x24020088, 0xaf420818, 0x3c020800, 0x24424180, 0xafa20020, 0x93430109, + 0x3c020800, 0x10600009, 0x24574190, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x2400031d, 0x9342010a, + 0x30420080, 0x1440001c, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000324, 0x0a000bf4, + 0x00000000, 0x93430109, 0x3063007f, 0x00031140, 0x000318c0, 0x00431021, + 0x24430088, 0xaf430818, 0x0000000d, 0x3c020800, 0x244241d0, 0x3c030800, + 0x247741e0, 0x0a000bf4, 0xafa20020, 0x24420001, 0x0a000f4c, 0xac62002c, + 0x8f840000, 0x8f850020, 0x24020800, 0xaf420178, 0x8f4209a4, 0x8c83017c, + 0x00a21023, 0x00431023, 0x2c420002, 0x14400004, 0x00000000, 0x0000000d, + 0x00000000, 0x24000349, 0x8f420104, 0x8f430988, 0x00431023, 0x58400005, + 0x8f4209a0, 0x0000000d, 0x00000000, 0x2400034d, 0x8f4209a0, 0x3c100800, + 0xae02414c, 0x8f4309a4, 0x2604414c, 0x2491ffd4, 0xae230030, 0x8f420104, + 0xae250024, 0x00431023, 0xac82ffd4, 0x8fa30020, 0x8c620000, 0x0040f809, + 0x0200b021, 0x00409021, 0x32440010, 0x32420002, 0x10400007, 0xafa40024, + 0x8e22001c, 0x32500040, 0x2403ffbf, 0x00431024, 0x0a000f13, 0xae22001c, + 0x32420020, 0x10400002, 0x3c020800, 0x245741b0, 0x32420001, 0x14400007, + 0x00000000, 0x8f820008, 0xaf420080, 0x8ec3414c, 0xaf430e10, 0x8e220030, + 0xaf420e18, 0x9343010b, 0x93420905, 0x30420008, 0x1040003c, 0x307400ff, + 0x8f820000, 0x8c430074, 0x0460000a, 0x00000000, 0x3c026000, 0x24030100, + 0xac43081c, 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x24000384, + 0x8f820000, 0x9044007b, 0x9343010a, 0x14830027, 0x32500040, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, 0xaf420148, + 0x24020047, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424700, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070100, 0x3c030800, 0x24624120, 0x0a000d01, 0x8c43001c, 0x32820002, + 0x10400047, 0x3c039000, 0x34630001, 0x8f820008, 0x32500040, 0x3c048000, + 0x00431025, 0xaf420020, 0x8f420020, 0x00441024, 0x1440fffd, 0x00000000, + 0x8f830000, 0x90620005, 0x3c058000, 0x34420008, 0xa0620005, 0x8f860000, + 0x34a50001, 0x8f840008, 0x8cc20074, 0x3c038000, 0x00852025, 0x00431025, + 0xacc20074, 0xaf440020, 0x90c3007b, 0x9342010a, 0x14620028, 0x3c040800, + 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, + 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030100, + 0xaf420148, 0x24020046, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34424600, 0xafa20010, 0x8f440100, + 0x0e000fe1, 0x3c070100, 0x3c040800, 0x24824120, 0x0a000d01, 0x8c43001c, + 0x93420108, 0x30420010, 0x50400050, 0x9343093f, 0x8f860000, 0x90c3007f, + 0x90c2007e, 0x90c40080, 0x306800ff, 0x00021600, 0x00081c00, 0x00431025, + 0x00042200, 0x90c3007a, 0x90c5000a, 0x00441025, 0x11050028, 0x00623825, + 0xa0c8000a, 0x24086000, 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, + 0x00001821, 0xaf420148, 0x24020052, 0xaf47014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf480154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, + 0x24630001, 0xad230030, 0x93420109, 0x9343010a, 0xafa80014, 0xafa00018, + 0x00021600, 0x00031c00, 0x00431025, 0x34425200, 0xafa20010, 0x0e000fe1, + 0x8f440100, 0x0a000cfb, 0x00000000, 0x3c026000, 0x24030100, 0xac43081c, + 0x3c030001, 0xac43081c, 0x0000000d, 0x00000000, 0x240003cd, 0x16800009, + 0x3c040800, 0x3c030800, 0x24624120, 0x8c43001c, 0x32500040, 0x2404ffbf, + 0x00641824, 0x0a000f13, 0xac43001c, 0x8c824120, 0x10400005, 0x3c030800, + 0x8c620034, 0xac804120, 0x24420001, 0xac620034, 0x9343093f, 0x24020012, + 0x1462000f, 0x329e0038, 0x17c0000c, 0x3c030800, 0x8f830000, 0x8c62004c, + 0xac62005c, 0x3c020800, 0x24444120, 0x8c82001c, 0x32500040, 0x2403ffbf, + 0x00431024, 0x0a000f13, 0xac82001c, 0xac604120, 0x97420908, 0x000211c0, + 0xaf420024, 0x97420908, 0x3c030080, 0x34630003, 0x000211c0, 0xaf42080c, + 0xaf43081c, 0x974209ec, 0x8f4309a4, 0xa7820028, 0x3c020800, 0x24444120, + 0xac830028, 0x93420937, 0x93430934, 0x00021080, 0x00621821, 0xa4830014, + 0x934209d8, 0x00621821, 0xa4830016, 0x934209d8, 0x93430934, 0x00809821, + 0x00431021, 0x24420010, 0xa4820012, 0x0000a821, 0x24020006, 0x13c00003, + 0xae62001c, 0x0a000d82, 0x24120008, 0x8f420958, 0x8f830020, 0x8f84002c, + 0x00431023, 0x00832023, 0x04800003, 0xae620004, 0x04410003, 0x0082102b, + 0x0a000d4e, 0xae600004, 0x54400001, 0xae640004, 0x8ee20000, 0x0040f809, + 0x00000000, 0x00409021, 0x32420001, 0x5440001e, 0x8ee20004, 0x8e630008, + 0x1060002b, 0x3c02c000, 0x00621025, 0xaf420e00, 0x8f420000, 0x30420008, + 0x1040fffd, 0x00000000, 0x97420e08, 0xa7820010, 0x8f430e04, 0x8e620008, + 0xaf830004, 0x8f840004, 0x0044102b, 0x1040000b, 0x24150001, 0x24020100, + 0x3c016000, 0xac22081c, 0x3c020001, 0x3c016000, 0xac22081c, 0x0000000d, + 0x00000000, 0x24000449, 0x24150001, 0x8ee20004, 0x0040f809, 0x00000000, + 0x02429025, 0x32420002, 0x5040001d, 0x8f470940, 0x12a00006, 0x8ec2414c, + 0x8f830000, 0xac6200a8, 0x8f840000, 0x8e620030, 0xac8200ac, 0x32420004, + 0x50400013, 0x8f470940, 0x3c020800, 0x3283007d, 0x106000fe, 0x245741b0, + 0x32820001, 0x50400006, 0x36520002, 0x8f830030, 0x8f420940, 0x106200f7, + 0x00000000, 0x36520002, 0x24020008, 0xa660000c, 0xa662000e, 0xae600008, + 0xa2600020, 0x8f470940, 0x3c030800, 0x24684120, 0x8d020028, 0x8d050008, + 0x9504000c, 0x9506000a, 0x95030022, 0x00451021, 0x00862021, 0x00641821, + 0xaf870030, 0xad020028, 0x32820030, 0x10400006, 0xa5030010, 0x91020020, + 0x32910040, 0x34420004, 0x0a000dd4, 0xa1020020, 0x93420923, 0x30420040, + 0x10400029, 0x32910040, 0x8f830000, 0x8f840020, 0x8c620084, 0x00441023, + 0x0442000a, 0x3c039000, 0x95020010, 0x8c630084, 0x00821021, 0x00621823, + 0x1c600004, 0x3c039000, 0x91020020, 0x34420001, 0xa1020020, 0x34630001, + 0x8f820008, 0x32910040, 0x3c048000, 0x00431025, 0xaf420020, 0x8f420020, + 0x00441024, 0x1440fffd, 0x00000000, 0x8f840000, 0x9083003f, 0x2402000a, + 0x10620005, 0x2402000c, 0x9083003f, 0x24020008, 0x14620002, 0x24020014, + 0xa082003f, 0x8f830008, 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, + 0x3c040800, 0x24904120, 0x9602000c, 0x96030016, 0x9604000e, 0x00431021, + 0x00442021, 0x24840002, 0x3084ffff, 0x0e000a55, 0xa6020018, 0x8f850018, + 0x00a01821, 0xa2030021, 0x8ee60008, 0x00402021, 0x24a50001, 0xaf850018, + 0x00c0f809, 0x00000000, 0x00402021, 0x0e000b12, 0x02202821, 0x8ee3000c, + 0x0060f809, 0x00402021, 0x96040018, 0x9602000e, 0x00822021, 0x24840002, + 0x0e000a6b, 0x3084ffff, 0x3c030800, 0x8c624120, 0x8e030008, 0x3c040800, + 0x00431023, 0x14400012, 0xac824120, 0x54600006, 0x8e02001c, 0x3243004a, + 0x24020002, 0x14620005, 0x00000000, 0x8e02001c, 0x34420040, 0x0a000e0b, + 0xae02001c, 0x52a00006, 0x36520002, 0x8e02002c, 0xaf420e10, 0x8e030030, + 0xaf430e18, 0x36520002, 0x52a00008, 0x96670010, 0x8f830000, 0x8f420e10, + 0xac6200a8, 0x8f840000, 0x8f420e18, 0xac8200ac, 0x96670010, 0x92680020, + 0x24020040, 0xaf420814, 0x8f830020, 0x8f82001c, 0x00671821, 0x00621023, + 0xaf830020, 0x58400005, 0x8f42095c, 0x8f820000, 0xaf83001c, 0xac430054, + 0x8f42095c, 0x31030008, 0xaf82002c, 0x1060001a, 0x00000000, 0x8f840000, + 0x90820120, 0x90830121, 0x304600ff, 0x00c31823, 0x30630007, 0x24020007, + 0x1062000e, 0x00000000, 0x90820122, 0x304200fe, 0xa0820122, 0x8f850000, + 0x00061880, 0x8f840020, 0x24a20100, 0x00431021, 0x24c30001, 0x30630007, + 0xac440000, 0x0a000e40, 0xa0a30120, 0x90820122, 0x34420001, 0xa0820122, + 0x14e00003, 0x31020001, 0x10400031, 0x32510002, 0x8f820000, 0x8c43000c, + 0x30630001, 0x1060002c, 0x32510002, 0x3c029000, 0x8f830008, 0x34420001, + 0x3c048000, 0x00621825, 0xaf430020, 0x8f420020, 0x00441024, 0x1440fffd, + 0x00000000, 0x8f870000, 0x8ce2000c, 0x30420001, 0x10400018, 0x00000000, + 0x94e2006a, 0x00022880, 0x50a00001, 0x24050001, 0x94e30068, 0x90e40081, + 0x3c020800, 0x8c460024, 0x00652821, 0x00852804, 0x00c5102b, 0x54400001, + 0x00a03021, 0x3c020800, 0x8c440028, 0x00c4182b, 0x54600001, 0x00c02021, + 0x8f430074, 0x2402fffe, 0x00822824, 0x00a31821, 0xace3000c, 0x8f830008, + 0x3c028000, 0x34420001, 0x00621825, 0xaf430020, 0x8f830020, 0x3c020800, + 0x24504120, 0xae030024, 0x8ee20010, 0x0040f809, 0x00000000, 0x12a00005, + 0x00000000, 0x8f420e10, 0xae02002c, 0x8f430e18, 0xae030030, 0x1220feba, + 0x0000a821, 0x8f870024, 0x97860028, 0x8f830000, 0x8f820030, 0x8f840020, + 0x8f85001c, 0x32500040, 0xa4e6002c, 0xac620044, 0x32420008, 0xac640050, + 0xac650054, 0x1040007a, 0x32820020, 0x10400027, 0x32910010, 0x24072000, + 0x3c090800, 0x3c038000, 0x8f420178, 0x00431024, 0x1440fffd, 0x8ec2414c, + 0x26c4414c, 0x2484ffd4, 0xaf420144, 0x8c820030, 0x3c030400, 0xaf420148, + 0x24020041, 0xaf43014c, 0x00001821, 0xa3420152, 0x3c021000, 0xa7430158, + 0xaf470154, 0xaf420178, 0x8ec5414c, 0x8d230030, 0x8c860030, 0x24630001, + 0xad230030, 0x93420109, 0x9343010a, 0xafa70014, 0xafa00018, 0x00021600, + 0x00031c00, 0x00431025, 0x34424100, 0xafa20010, 0x8f440100, 0x0e000fe1, + 0x3c070400, 0x12200028, 0x24072000, 0x3c090800, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030300, 0xaf420148, 0x2402004e, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424e00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070300, 0x0a000f0b, 0x8fa30024, + 0x32820008, 0x10400026, 0x3c090800, 0x24072000, 0x3c038000, 0x8f420178, + 0x00431024, 0x1440fffd, 0x8ec2414c, 0x26c4414c, 0x2484ffd4, 0xaf420144, + 0x8c820030, 0x3c030200, 0xaf420148, 0x2402004b, 0xaf43014c, 0x00001821, + 0xa3420152, 0x3c021000, 0xa7430158, 0xaf470154, 0xaf420178, 0x8ec5414c, + 0x8d230030, 0x8c860030, 0x24630001, 0xad230030, 0x93420109, 0x9343010a, + 0xafa70014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, 0x34424b00, + 0xafa20010, 0x8f440100, 0x0e000fe1, 0x3c070200, 0x8fa30024, 0x14600004, + 0x8fa40020, 0x32420010, 0x10400004, 0x00000000, 0x8c820004, 0x0040f809, + 0x00000000, 0x12000006, 0x8fa30020, 0x8c620008, 0x0040f809, 0x00000000, + 0x0a000f4d, 0x8fbf004c, 0x3c030800, 0x8c62413c, 0x30420040, 0x1440002f, + 0x8fbf004c, 0x24040040, 0x8f910020, 0x3c038000, 0x8f420178, 0x00431024, + 0x1440fffd, 0x8ec2414c, 0x26d0414c, 0x2610ffd4, 0xaf420144, 0x8e020030, + 0x00001821, 0xaf420148, 0x24020049, 0xaf51014c, 0xa3420152, 0x3c021000, + 0xa7430158, 0xaf440154, 0xaf420178, 0x8ec5414c, 0x8e060030, 0x93420109, + 0x9343010a, 0xafa40014, 0xafa00018, 0x00021600, 0x00031c00, 0x00431025, + 0x34424900, 0xafa20010, 0x8f440100, 0x0e000fe1, 0x02203821, 0x8f830000, + 0x8e020030, 0x8c64017c, 0x02221023, 0x00441023, 0x2c420002, 0x14400005, + 0x8fbf004c, 0x0000000d, 0x00000000, 0x240000ca, 0x8fbf004c, 0x8fbe0048, + 0x8fb70044, 0x8fb60040, 0x8fb5003c, 0x8fb40038, 0x8fb30034, 0x8fb20030, + 0x8fb1002c, 0x8fb00028, 0x03e00008, 0x27bd0050, 0x03e00008, 0x00001021, + 0x3c030800, 0x24654120, 0x8ca40004, 0x8c634120, 0x0064102b, 0x54400001, + 0x00602021, 0x9743093c, 0x0083102b, 0x54400001, 0x00801821, 0x00001021, + 0xaca30008, 0x03e00008, 0xa4a00022, 0x8f850004, 0x97840010, 0x3c030800, + 0x24634120, 0x24020008, 0xa462000e, 0x8f820004, 0xa460000c, 0x000420c2, + 0x30840008, 0x2c420001, 0x00021023, 0x30420006, 0xac650008, 0x03e00008, + 0xa0640020, 0x3c020800, 0x24424120, 0x90450021, 0x94430018, 0x3c021100, + 0xac800004, 0x00052c00, 0x24630002, 0x00621825, 0x00a32825, 0x24820008, + 0x03e00008, 0xac850000, 0x0000000d, 0x00000000, 0x2400016f, 0x03e00008, + 0x00000000, 0x0000000d, 0x00000000, 0x2400017b, 0x03e00008, 0x00000000, + 0x03e00008, 0x00000000, 0x3c020800, 0x24424120, 0xac400008, 0xa4400022, + 0x03e00008, 0x24020001, 0x3c020800, 0x24424120, 0x24030008, 0xac400008, + 0xa440000c, 0xa443000e, 0xa0400020, 0x03e00008, 0x24020004, 0x03e00008, + 0x00001021, 0x10c00007, 0x00000000, 0x8ca20000, 0x24c6ffff, 0x24a50004, + 0xac820000, 0x14c0fffb, 0x24840004, 0x03e00008, 0x00000000, 0x0a000fb2, + 0x00a01021, 0xac860000, 0x24840004, 0x00a01021, 0x1440fffc, 0x24a5ffff, + 0x03e00008, 0x00000000, 0x3c0a0800, 0x8d490068, 0x3c050800, 0x24a51090, + 0x00093140, 0x00c51021, 0xac440000, 0x8f440e04, 0x00a61021, 0xac440004, + 0x97430e08, 0x97420e0c, 0x00a62021, 0x00031c00, 0x00431025, 0xac820008, + 0x8f430e10, 0x00801021, 0xac43000c, 0x8f440e14, 0xac440010, 0x8f430e18, + 0x3c0800ff, 0xac430014, 0x8f470e1c, 0x3508ffff, 0x25290001, 0xac470018, + 0x3c070800, 0x8ce3006c, 0x9344010a, 0x3c026000, 0x24630001, 0xace3006c, + 0x8c434448, 0x3129007f, 0x00a62821, 0xad490068, 0x00042600, 0x00681824, + 0x00832025, 0x03e00008, 0xaca4001c, 0x8fac0010, 0x8fad0014, 0x8fae0018, + 0x3c0b0800, 0x8d6a0060, 0x3c080800, 0x25080078, 0x000a4940, 0x01281021, + 0x01091821, 0xac440000, 0x00601021, 0xac650004, 0xac460008, 0xac67000c, + 0xac4c0010, 0xac6d0014, 0x3c036000, 0xac4e0018, 0x8c654448, 0x3c040800, + 0x8c820064, 0x254a0001, 0x314a007f, 0x01094021, 0xad6a0060, 0x24420001, + 0xac820064, 0x03e00008, 0xad05001c, 0x00000000 }; + +static u32 bnx2_TXP_b06FwData[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwRodata[(0x0/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwBss[(0x194/4) + 1] = { 0x00000000 }; +static u32 bnx2_TXP_b06FwSbss[(0x34/4) + 1] = { 0x00000000 }; + diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 770e28f98fd..269a5e40734 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3037,7 +3037,7 @@ static void bond_activebackup_arp_mon(struct net_device *bond_dev) bond_set_slave_inactive_flags(bond->current_arp_slave); /* search for next candidate */ - bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave) { + bond_for_each_slave_from(bond, slave, i, bond->current_arp_slave->next) { if (IS_UP(slave->dev)) { slave->link = BOND_LINK_BACK; bond_set_slave_active_flags(slave); diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c new file mode 100644 index 00000000000..f4ba0ffb863 --- /dev/null +++ b/drivers/net/dm9000.c @@ -0,0 +1,1219 @@ +/* + * dm9000.c: Version 1.2 03/18/2003 + * + * A Davicom DM9000 ISA NIC fast Ethernet driver for Linux. + * Copyright (C) 1997 Sten Wang + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * (C)Copyright 1997-1998 DAVICOM Semiconductor,Inc. All Rights Reserved. + * + * V0.11 06/20/2001 REG_0A bit3=1, default enable BP with DA match + * 06/22/2001 Support DM9801 progrmming + * E3: R25 = ((R24 + NF) & 0x00ff) | 0xf000 + * E4: R25 = ((R24 + NF) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + 3 + * E5: R25 = ((R24 + NF - 3) & 0x00ff) | 0xc200 + * R17 = (R17 & 0xfff0) | NF + * + * v1.00 modify by simon 2001.9.5 + * change for kernel 2.4.x + * + * v1.1 11/09/2001 fix force mode bug + * + * v1.2 03/18/2003 Weilun Huang <weilun_huang@davicom.com.tw>: + * Fixed phy reset. + * Added tx/rx 32 bit mode. + * Cleaned up for kernel merge. + * + * 03/03/2004 Sascha Hauer <s.hauer@pengutronix.de> + * Port to 2.6 kernel + * + * 24-Sep-2004 Ben Dooks <ben@simtec.co.uk> + * Cleanup of code to remove ifdefs + * Allowed platform device data to influence access width + * Reformatting areas of code + * + * 17-Mar-2005 Sascha Hauer <s.hauer@pengutronix.de> + * * removed 2.4 style module parameters + * * removed removed unused stat counter and fixed + * net_device_stats + * * introduced tx_timeout function + * * reworked locking + */ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/init.h> +#include <linux/skbuff.h> +#include <linux/version.h> +#include <linux/spinlock.h> +#include <linux/crc32.h> +#include <linux/mii.h> +#include <linux/dm9000.h> +#include <linux/delay.h> + +#include <asm/delay.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include "dm9000.h" + +/* Board/System/Debug information/definition ---------------- */ + +#define DM9000_PHY 0x40 /* PHY address 0x01 */ + +#define TRUE 1 +#define FALSE 0 + +#define CARDNAME "dm9000" +#define PFX CARDNAME ": " + +#define DM9000_TIMER_WUT jiffies+(HZ*2) /* timer wakeup time : 2 second */ + +#define DM9000_DEBUG 0 + +#if DM9000_DEBUG > 2 +#define PRINTK3(args...) printk(CARDNAME ": " args) +#else +#define PRINTK3(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 1 +#define PRINTK2(args...) printk(CARDNAME ": " args) +#else +#define PRINTK2(args...) do { } while(0) +#endif + +#if DM9000_DEBUG > 0 +#define PRINTK1(args...) printk(CARDNAME ": " args) +#define PRINTK(args...) printk(CARDNAME ": " args) +#else +#define PRINTK1(args...) do { } while(0) +#define PRINTK(args...) printk(KERN_DEBUG args) +#endif + +/* + * Transmit timeout, default 5 seconds. + */ +static int watchdog = 5000; +module_param(watchdog, int, 0400); +MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); + +/* Structure/enum declaration ------------------------------- */ +typedef struct board_info { + + void __iomem *io_addr; /* Register I/O base address */ + void __iomem *io_data; /* Data I/O address */ + u16 irq; /* IRQ */ + + u16 tx_pkt_cnt; + u16 queue_pkt_len; + u16 queue_start_addr; + u16 dbug_cnt; + u8 io_mode; /* 0:word, 2:byte */ + u8 phy_addr; + + void (*inblk)(void __iomem *port, void *data, int length); + void (*outblk)(void __iomem *port, void *data, int length); + void (*dumpblk)(void __iomem *port, int length); + + struct resource *addr_res; /* resources found */ + struct resource *data_res; + struct resource *addr_req; /* resources requested */ + struct resource *data_req; + struct resource *irq_res; + + struct timer_list timer; + struct net_device_stats stats; + unsigned char srom[128]; + spinlock_t lock; + + struct mii_if_info mii; + u32 msg_enable; +} board_info_t; + +/* function declaration ------------------------------------- */ +static int dm9000_probe(struct device *); +static int dm9000_open(struct net_device *); +static int dm9000_start_xmit(struct sk_buff *, struct net_device *); +static int dm9000_stop(struct net_device *); +static int dm9000_do_ioctl(struct net_device *, struct ifreq *, int); + + +static void dm9000_timer(unsigned long); +static void dm9000_init_dm9000(struct net_device *); + +static struct net_device_stats *dm9000_get_stats(struct net_device *); + +static irqreturn_t dm9000_interrupt(int, void *, struct pt_regs *); + +static int dm9000_phy_read(struct net_device *dev, int phyaddr_unsused, int reg); +static void dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, + int value); +static u16 read_srom_word(board_info_t *, int); +static void dm9000_rx(struct net_device *); +static void dm9000_hash_table(struct net_device *); + +//#define DM9000_PROGRAM_EEPROM +#ifdef DM9000_PROGRAM_EEPROM +static void program_eeprom(board_info_t * db); +#endif +/* DM9000 network board routine ---------------------------- */ + +static void +dm9000_reset(board_info_t * db) +{ + PRINTK1("dm9000x: resetting\n"); + /* RESET device */ + writeb(DM9000_NCR, db->io_addr); + udelay(200); + writeb(NCR_RST, db->io_data); + udelay(200); +} + +/* + * Read a byte from I/O port + */ +static u8 +ior(board_info_t * db, int reg) +{ + writeb(reg, db->io_addr); + return readb(db->io_data); +} + +/* + * Write a byte to I/O port + */ + +static void +iow(board_info_t * db, int reg, int value) +{ + writeb(reg, db->io_addr); + writeb(value, db->io_data); +} + +/* routines for sending block to chip */ + +static void dm9000_outblk_8bit(void __iomem *reg, void *data, int count) +{ + writesb(reg, data, count); +} + +static void dm9000_outblk_16bit(void __iomem *reg, void *data, int count) +{ + writesw(reg, data, (count+1) >> 1); +} + +static void dm9000_outblk_32bit(void __iomem *reg, void *data, int count) +{ + writesl(reg, data, (count+3) >> 2); +} + +/* input block from chip to memory */ + +static void dm9000_inblk_8bit(void __iomem *reg, void *data, int count) +{ + readsb(reg, data, count+1); +} + + +static void dm9000_inblk_16bit(void __iomem *reg, void *data, int count) +{ + readsw(reg, data, (count+1) >> 1); +} + +static void dm9000_inblk_32bit(void __iomem *reg, void *data, int count) +{ + readsl(reg, data, (count+3) >> 2); +} + +/* dump block from chip to null */ + +static void dm9000_dumpblk_8bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + for (i = 0; i < count; i++) + tmp = readb(reg); +} + +static void dm9000_dumpblk_16bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 1) >> 1; + + for (i = 0; i < count; i++) + tmp = readw(reg); +} + +static void dm9000_dumpblk_32bit(void __iomem *reg, int count) +{ + int i; + int tmp; + + count = (count + 3) >> 2; + + for (i = 0; i < count; i++) + tmp = readl(reg); +} + +/* dm9000_set_io + * + * select the specified set of io routines to use with the + * device + */ + +static void dm9000_set_io(struct board_info *db, int byte_width) +{ + /* use the size of the data resource to work out what IO + * routines we want to use + */ + + switch (byte_width) { + case 1: + db->dumpblk = dm9000_dumpblk_8bit; + db->outblk = dm9000_outblk_8bit; + db->inblk = dm9000_inblk_8bit; + break; + + case 2: + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 3: + printk(KERN_ERR PFX ": 3 byte IO, falling back to 16bit\n"); + db->dumpblk = dm9000_dumpblk_16bit; + db->outblk = dm9000_outblk_16bit; + db->inblk = dm9000_inblk_16bit; + break; + + case 4: + default: + db->dumpblk = dm9000_dumpblk_32bit; + db->outblk = dm9000_outblk_32bit; + db->inblk = dm9000_inblk_32bit; + break; + } +} + + +/* Our watchdog timed out. Called by the networking layer */ +static void dm9000_timeout(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + /* Save previous register address */ + reg_save = readb(db->io_addr); + spin_lock_irqsave(db->lock,flags); + + netif_stop_queue(dev); + dm9000_reset(db); + dm9000_init_dm9000(dev); + /* We can accept TX packets again */ + dev->trans_start = jiffies; + netif_wake_queue(dev); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); +} + + +/* dm9000_release_board + * + * release a board, and any mapped resources + */ + +static void +dm9000_release_board(struct platform_device *pdev, struct board_info *db) +{ + if (db->data_res == NULL) { + if (db->addr_res != NULL) + release_mem_region((unsigned long)db->io_addr, 4); + return; + } + + /* unmap our resources */ + + iounmap(db->io_addr); + iounmap(db->io_data); + + /* release the resources */ + + if (db->data_req != NULL) { + release_resource(db->data_req); + kfree(db->data_req); + } + + if (db->addr_res != NULL) { + release_resource(db->data_req); + kfree(db->addr_req); + } +} + +#define res_size(_r) (((_r)->end - (_r)->start) + 1) + +/* + * Search DM9000 board, allocate space and register it + */ +static int +dm9000_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct dm9000_plat_data *pdata = pdev->dev.platform_data; + struct board_info *db; /* Point a board information structure */ + struct net_device *ndev; + unsigned long base; + int ret = 0; + int iosize; + int i; + u32 id_val; + + printk(KERN_INFO "%s Ethernet Driver\n", CARDNAME); + + /* Init network device */ + ndev = alloc_etherdev(sizeof (struct board_info)); + if (!ndev) { + printk("%s: could not allocate device.\n", CARDNAME); + return -ENOMEM; + } + + SET_MODULE_OWNER(ndev); + SET_NETDEV_DEV(ndev, dev); + + PRINTK2("dm9000_probe()"); + + /* setup board info structure */ + db = (struct board_info *) ndev->priv; + memset(db, 0, sizeof (*db)); + + if (pdev->num_resources < 2) { + ret = -ENODEV; + goto out; + } + + switch (pdev->num_resources) { + case 2: + base = pdev->resource[0].start; + + if (!request_mem_region(base, 4, ndev->name)) { + ret = -EBUSY; + goto out; + } + + ndev->base_addr = base; + ndev->irq = pdev->resource[1].start; + db->io_addr = (void *)base; + db->io_data = (void *)(base + 4); + + break; + + case 3: + db->addr_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + db->data_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + db->irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + + if (db->addr_res == NULL || db->data_res == NULL) { + printk(KERN_ERR PFX "insufficient resources\n"); + ret = -ENOENT; + goto out; + } + + i = res_size(db->addr_res); + db->addr_req = request_mem_region(db->addr_res->start, i, + pdev->name); + + if (db->addr_req == NULL) { + printk(KERN_ERR PFX "cannot claim address reg area\n"); + ret = -EIO; + goto out; + } + + db->io_addr = ioremap(db->addr_res->start, i); + + if (db->io_addr == NULL) { + printk(KERN_ERR "failed to ioremap address reg\n"); + ret = -EINVAL; + goto out; + } + + iosize = res_size(db->data_res); + db->data_req = request_mem_region(db->data_res->start, iosize, + pdev->name); + + if (db->data_req == NULL) { + printk(KERN_ERR PFX "cannot claim data reg area\n"); + ret = -EIO; + goto out; + } + + db->io_data = ioremap(db->data_res->start, iosize); + + if (db->io_data == NULL) { + printk(KERN_ERR "failed to ioremap data reg\n"); + ret = -EINVAL; + goto out; + } + + /* fill in parameters for net-dev structure */ + + ndev->base_addr = (unsigned long)db->io_addr; + ndev->irq = db->irq_res->start; + + /* ensure at least we have a default set of IO routines */ + dm9000_set_io(db, iosize); + + } + + /* check to see if anything is being over-ridden */ + if (pdata != NULL) { + /* check to see if the driver wants to over-ride the + * default IO width */ + + if (pdata->flags & DM9000_PLATF_8BITONLY) + dm9000_set_io(db, 1); + + if (pdata->flags & DM9000_PLATF_16BITONLY) + dm9000_set_io(db, 2); + + if (pdata->flags & DM9000_PLATF_32BITONLY) + dm9000_set_io(db, 4); + + /* check to see if there are any IO routine + * over-rides */ + + if (pdata->inblk != NULL) + db->inblk = pdata->inblk; + + if (pdata->outblk != NULL) + db->outblk = pdata->outblk; + + if (pdata->dumpblk != NULL) + db->dumpblk = pdata->dumpblk; + } + + dm9000_reset(db); + + /* try two times, DM9000 sometimes gets the first read wrong */ + for (i = 0; i < 2; i++) { + id_val = ior(db, DM9000_VIDL); + id_val |= (u32)ior(db, DM9000_VIDH) << 8; + id_val |= (u32)ior(db, DM9000_PIDL) << 16; + id_val |= (u32)ior(db, DM9000_PIDH) << 24; + + if (id_val == DM9000_ID) + break; + printk("%s: read wrong id 0x%08x\n", CARDNAME, id_val); + } + + if (id_val != DM9000_ID) { + printk("%s: wrong id: 0x%08x\n", CARDNAME, id_val); + goto release; + } + + /* from this point we assume that we have found a DM9000 */ + + /* driver system function */ + ether_setup(ndev); + + ndev->open = &dm9000_open; + ndev->hard_start_xmit = &dm9000_start_xmit; + ndev->tx_timeout = &dm9000_timeout; + ndev->watchdog_timeo = msecs_to_jiffies(watchdog); + ndev->stop = &dm9000_stop; + ndev->get_stats = &dm9000_get_stats; + ndev->set_multicast_list = &dm9000_hash_table; + ndev->do_ioctl = &dm9000_do_ioctl; + +#ifdef DM9000_PROGRAM_EEPROM + program_eeprom(db); +#endif + db->msg_enable = NETIF_MSG_LINK; + db->mii.phy_id_mask = 0x1f; + db->mii.reg_num_mask = 0x1f; + db->mii.force_media = 0; + db->mii.full_duplex = 0; + db->mii.dev = ndev; + db->mii.mdio_read = dm9000_phy_read; + db->mii.mdio_write = dm9000_phy_write; + + /* Read SROM content */ + for (i = 0; i < 64; i++) + ((u16 *) db->srom)[i] = read_srom_word(db, i); + + /* Set Node Address */ + for (i = 0; i < 6; i++) + ndev->dev_addr[i] = db->srom[i]; + + if (!is_valid_ether_addr(ndev->dev_addr)) + printk("%s: Invalid ethernet MAC address. Please " + "set using ifconfig\n", ndev->name); + + dev_set_drvdata(dev, ndev); + ret = register_netdev(ndev); + + if (ret == 0) { + printk("%s: dm9000 at %p,%p IRQ %d MAC: ", + ndev->name, db->io_addr, db->io_data, ndev->irq); + for (i = 0; i < 5; i++) + printk("%02x:", ndev->dev_addr[i]); + printk("%02x\n", ndev->dev_addr[5]); + } + return 0; + + release: + out: + printk("%s: not found (%d).\n", CARDNAME, ret); + + dm9000_release_board(pdev, db); + kfree(ndev); + + return ret; +} + +/* + * Open the interface. + * The interface is opened whenever "ifconfig" actives it. + */ +static int +dm9000_open(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK2("entering dm9000_open\n"); + + if (request_irq(dev->irq, &dm9000_interrupt, SA_SHIRQ, dev->name, dev)) + return -EAGAIN; + + /* Initialize DM9000 board */ + dm9000_reset(db); + dm9000_init_dm9000(dev); + + /* Init driver variable */ + db->dbug_cnt = 0; + + /* set and active a timer process */ + init_timer(&db->timer); + db->timer.expires = DM9000_TIMER_WUT * 2; + db->timer.data = (unsigned long) dev; + db->timer.function = &dm9000_timer; + add_timer(&db->timer); + + mii_check_media(&db->mii, netif_msg_link(db), 1); + netif_start_queue(dev); + + return 0; +} + +/* + * Initilize dm9000 board + */ +static void +dm9000_init_dm9000(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* I/O mode */ + db->io_mode = ior(db, DM9000_ISR) >> 6; /* ISR bit7:6 keeps I/O mode */ + + /* GPIO0 on pre-activate PHY */ + iow(db, DM9000_GPR, 0); /* REG_1F bit0 activate phyxcer */ + iow(db, DM9000_GPCR, GPCR_GEP_CNTL); /* Let GPIO0 output */ + iow(db, DM9000_GPR, 0); /* Enable PHY */ + + /* Program operating register */ + iow(db, DM9000_TCR, 0); /* TX Polling clear */ + iow(db, DM9000_BPTR, 0x3f); /* Less 3Kb, 200us */ + iow(db, DM9000_FCR, 0xff); /* Flow Control */ + iow(db, DM9000_SMCR, 0); /* Special Mode */ + /* clear TX status */ + iow(db, DM9000_NSR, NSR_WAKEST | NSR_TX2END | NSR_TX1END); + iow(db, DM9000_ISR, ISR_CLR_STATUS); /* Clear interrupt status */ + + /* Set address filter table */ + dm9000_hash_table(dev); + + /* Activate DM9000 */ + iow(db, DM9000_RCR, RCR_DIS_LONG | RCR_DIS_CRC | RCR_RXEN); + /* Enable TX/RX interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Init Driver variable */ + db->tx_pkt_cnt = 0; + db->queue_pkt_len = 0; + dev->trans_start = 0; + spin_lock_init(&db->lock); +} + +/* + * Hardware start transmission. + * Send a packet to media from the upper layer. + */ +static int +dm9000_start_xmit(struct sk_buff *skb, struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + PRINTK3("dm9000_start_xmit\n"); + + if (db->tx_pkt_cnt > 1) + return 1; + + netif_stop_queue(dev); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Move data to DM9000 TX RAM */ + writeb(DM9000_MWCMD, db->io_addr); + + (db->outblk)(db->io_data, skb->data, skb->len); + db->stats.tx_bytes += skb->len; + + /* TX control: First packet immediately send, second packet queue */ + if (db->tx_pkt_cnt == 0) { + + /* First Packet */ + db->tx_pkt_cnt++; + + /* Set TX length to DM9000 */ + iow(db, DM9000_TXPLL, skb->len & 0xff); + iow(db, DM9000_TXPLH, (skb->len >> 8) & 0xff); + + /* Issue TX polling command */ + iow(db, DM9000_TCR, TCR_TXREQ); /* Cleared after TX complete */ + + dev->trans_start = jiffies; /* save the time stamp */ + + } else { + /* Second packet */ + db->tx_pkt_cnt++; + db->queue_pkt_len = skb->len; + } + + /* free this SKB */ + dev_kfree_skb(skb); + + /* Re-enable resource check */ + if (db->tx_pkt_cnt == 1) + netif_wake_queue(dev); + + /* Re-enable interrupt */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + return 0; +} + +static void +dm9000_shutdown(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + + /* RESET device */ + dm9000_phy_write(dev, 0, MII_BMCR, BMCR_RESET); /* PHY RESET */ + iow(db, DM9000_GPR, 0x01); /* Power-Down PHY */ + iow(db, DM9000_IMR, IMR_PAR); /* Disable all interrupt */ + iow(db, DM9000_RCR, 0x00); /* Disable RX */ +} + +/* + * Stop the interface. + * The interface is stopped when it is brought. + */ +static int +dm9000_stop(struct net_device *ndev) +{ + board_info_t *db = (board_info_t *) ndev->priv; + + PRINTK1("entering %s\n",__FUNCTION__); + + /* deleted timer */ + del_timer(&db->timer); + + netif_stop_queue(ndev); + netif_carrier_off(ndev); + + /* free interrupt */ + free_irq(ndev->irq, ndev); + + dm9000_shutdown(ndev); + + return 0; +} + +/* + * DM9000 interrupt handler + * receive the packet to upper layer, free the transmitted packet + */ + +void +dm9000_tx_done(struct net_device *dev, board_info_t * db) +{ + int tx_status = ior(db, DM9000_NSR); /* Got TX status */ + + if (tx_status & (NSR_TX2END | NSR_TX1END)) { + /* One packet sent complete */ + db->tx_pkt_cnt--; + db->stats.tx_packets++; + + /* Queue packet check & send */ + if (db->tx_pkt_cnt > 0) { + iow(db, DM9000_TXPLL, db->queue_pkt_len & 0xff); + iow(db, DM9000_TXPLH, (db->queue_pkt_len >> 8) & 0xff); + iow(db, DM9000_TCR, TCR_TXREQ); + dev->trans_start = jiffies; + } + netif_wake_queue(dev); + } +} + +static irqreturn_t +dm9000_interrupt(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + board_info_t *db; + int int_status; + u8 reg_save; + + PRINTK3("entering %s\n",__FUNCTION__); + + if (!dev) { + PRINTK1("dm9000_interrupt() without DEVICE arg\n"); + return IRQ_HANDLED; + } + + /* A real interrupt coming */ + db = (board_info_t *) dev->priv; + spin_lock(&db->lock); + + /* Save previous register address */ + reg_save = readb(db->io_addr); + + /* Disable all interrupts */ + iow(db, DM9000_IMR, IMR_PAR); + + /* Got DM9000 interrupt status */ + int_status = ior(db, DM9000_ISR); /* Got ISR */ + iow(db, DM9000_ISR, int_status); /* Clear ISR status */ + + /* Received the coming packet */ + if (int_status & ISR_PRS) + dm9000_rx(dev); + + /* Trnasmit Interrupt check */ + if (int_status & ISR_PTS) + dm9000_tx_done(dev, db); + + /* Re-enable interrupt mask */ + iow(db, DM9000_IMR, IMR_PAR | IMR_PTM | IMR_PRM); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + + spin_unlock(&db->lock); + + return IRQ_HANDLED; +} + +/* + * Get statistics from driver. + */ +static struct net_device_stats * +dm9000_get_stats(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + return &db->stats; +} + +/* + * Process the upper socket ioctl command + */ +static int +dm9000_do_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) +{ + PRINTK1("entering %s\n",__FUNCTION__); + return 0; +} + +/* + * A periodic timer routine + * Dynamic media sense, allocated Rx buffer... + */ +static void +dm9000_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *) data; + board_info_t *db = (board_info_t *) dev->priv; + u8 reg_save; + unsigned long flags; + + PRINTK3("dm9000_timer()\n"); + + spin_lock_irqsave(db->lock,flags); + /* Save previous register address */ + reg_save = readb(db->io_addr); + + mii_check_media(&db->mii, netif_msg_link(db), 0); + + /* Restore previous register address */ + writeb(reg_save, db->io_addr); + spin_unlock_irqrestore(db->lock,flags); + + /* Set timer again */ + db->timer.expires = DM9000_TIMER_WUT; + add_timer(&db->timer); +} + +struct dm9000_rxhdr { + u16 RxStatus; + u16 RxLen; +} __attribute__((__packed__)); + +/* + * Received a packet and pass to upper layer + */ +static void +dm9000_rx(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dm9000_rxhdr rxhdr; + struct sk_buff *skb; + u8 rxbyte, *rdptr; + int GoodPacket; + int RxLen; + + /* Check packet ready or not */ + do { + ior(db, DM9000_MRCMDX); /* Dummy read */ + + /* Get most updated data */ + rxbyte = readb(db->io_data); + + /* Status check: this byte must be 0 or 1 */ + if (rxbyte > DM9000_PKT_RDY) { + printk("status check failed: %d\n", rxbyte); + iow(db, DM9000_RCR, 0x00); /* Stop Device */ + iow(db, DM9000_ISR, IMR_PAR); /* Stop INT request */ + return; + } + + if (rxbyte != DM9000_PKT_RDY) + return; + + /* A packet ready now & Get status/length */ + GoodPacket = TRUE; + writeb(DM9000_MRCMD, db->io_addr); + + (db->inblk)(db->io_data, &rxhdr, sizeof(rxhdr)); + + RxLen = rxhdr.RxLen; + + /* Packet Status check */ + if (RxLen < 0x40) { + GoodPacket = FALSE; + PRINTK1("Bad Packet received (runt)\n"); + } + + if (RxLen > DM9000_PKT_MAX) { + PRINTK1("RST: RX Len:%x\n", RxLen); + } + + if (rxhdr.RxStatus & 0xbf00) { + GoodPacket = FALSE; + if (rxhdr.RxStatus & 0x100) { + PRINTK1("fifo error\n"); + db->stats.rx_fifo_errors++; + } + if (rxhdr.RxStatus & 0x200) { + PRINTK1("crc error\n"); + db->stats.rx_crc_errors++; + } + if (rxhdr.RxStatus & 0x8000) { + PRINTK1("length error\n"); + db->stats.rx_length_errors++; + } + } + + /* Move data from DM9000 */ + if (GoodPacket + && ((skb = dev_alloc_skb(RxLen + 4)) != NULL)) { + skb->dev = dev; + skb_reserve(skb, 2); + rdptr = (u8 *) skb_put(skb, RxLen - 4); + + /* Read received packet from RX SRAM */ + + (db->inblk)(db->io_data, rdptr, RxLen); + db->stats.rx_bytes += RxLen; + + /* Pass to upper layer */ + skb->protocol = eth_type_trans(skb, dev); + netif_rx(skb); + db->stats.rx_packets++; + + } else { + /* need to dump the packet's data */ + + (db->dumpblk)(db->io_data, RxLen); + } + } while (rxbyte == DM9000_PKT_RDY); +} + +/* + * Read a word data from SROM + */ +static u16 +read_srom_word(board_info_t * db, int offset) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPCR, EPCR_ERPRR); + mdelay(8); /* according to the datasheet 200us should be enough, + but it doesn't work */ + iow(db, DM9000_EPCR, 0x0); + return (ior(db, DM9000_EPDRL) + (ior(db, DM9000_EPDRH) << 8)); +} + +#ifdef DM9000_PROGRAM_EEPROM +/* + * Write a word data to SROM + */ +static void +write_srom_word(board_info_t * db, int offset, u16 val) +{ + iow(db, DM9000_EPAR, offset); + iow(db, DM9000_EPDRH, ((val >> 8) & 0xff)); + iow(db, DM9000_EPDRL, (val & 0xff)); + iow(db, DM9000_EPCR, EPCR_WEP | EPCR_ERPRW); + mdelay(8); /* same shit */ + iow(db, DM9000_EPCR, 0); +} + +/* + * Only for development: + * Here we write static data to the eeprom in case + * we don't have valid content on a new board + */ +static void +program_eeprom(board_info_t * db) +{ + u16 eeprom[] = { 0x0c00, 0x007f, 0x1300, /* MAC Address */ + 0x0000, /* Autoload: accept nothing */ + 0x0a46, 0x9000, /* Vendor / Product ID */ + 0x0000, /* pin control */ + 0x0000, + }; /* Wake-up mode control */ + int i; + for (i = 0; i < 8; i++) + write_srom_word(db, i, eeprom[i]); +} +#endif + + +/* + * Calculate the CRC valude of the Rx packet + * flag = 1 : return the reverse CRC (for the received packet CRC) + * 0 : return the normal CRC (for Hash Table index) + */ + +static unsigned long +cal_CRC(unsigned char *Data, unsigned int Len, u8 flag) +{ + + u32 crc = ether_crc_le(Len, Data); + + if (flag) + return ~crc; + + return crc; +} + +/* + * Set DM9000 multicast address + */ +static void +dm9000_hash_table(struct net_device *dev) +{ + board_info_t *db = (board_info_t *) dev->priv; + struct dev_mc_list *mcptr = dev->mc_list; + int mc_cnt = dev->mc_count; + u32 hash_val; + u16 i, oft, hash_table[4]; + unsigned long flags; + + PRINTK2("dm9000_hash_table()\n"); + + spin_lock_irqsave(&db->lock,flags); + + for (i = 0, oft = 0x10; i < 6; i++, oft++) + iow(db, oft, dev->dev_addr[i]); + + /* Clear Hash Table */ + for (i = 0; i < 4; i++) + hash_table[i] = 0x0; + + /* broadcast address */ + hash_table[3] = 0x8000; + + /* the multicast address in Hash Table : 64 bits */ + for (i = 0; i < mc_cnt; i++, mcptr = mcptr->next) { + hash_val = cal_CRC((char *) mcptr->dmi_addr, 6, 0) & 0x3f; + hash_table[hash_val / 16] |= (u16) 1 << (hash_val % 16); + } + + /* Write the hash table to MAC MD table */ + for (i = 0, oft = 0x16; i < 4; i++) { + iow(db, oft++, hash_table[i] & 0xff); + iow(db, oft++, (hash_table[i] >> 8) & 0xff); + } + + spin_unlock_irqrestore(&db->lock,flags); +} + + +/* + * Read a word from phyxcer + */ +static int +dm9000_phy_read(struct net_device *dev, int phy_reg_unused, int reg) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + int ret; + + spin_lock_irqsave(&db->lock,flags); + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + iow(db, DM9000_EPCR, 0xc); /* Issue phyxcer read command */ + udelay(100); /* Wait read complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer read command */ + + /* The read data keeps on REG_0D & REG_0E */ + ret = (ior(db, DM9000_EPDRH) << 8) | ior(db, DM9000_EPDRL); + + spin_unlock_irqrestore(&db->lock,flags); + + return ret; +} + +/* + * Write a word to phyxcer + */ +static void +dm9000_phy_write(struct net_device *dev, int phyaddr_unused, int reg, int value) +{ + board_info_t *db = (board_info_t *) dev->priv; + unsigned long flags; + + spin_lock_irqsave(&db->lock,flags); + + /* Fill the phyxcer register into REG_0C */ + iow(db, DM9000_EPAR, DM9000_PHY | reg); + + /* Fill the written data into REG_0D & REG_0E */ + iow(db, DM9000_EPDRL, (value & 0xff)); + iow(db, DM9000_EPDRH, ((value >> 8) & 0xff)); + + iow(db, DM9000_EPCR, 0xa); /* Issue phyxcer write command */ + udelay(500); /* Wait write complete */ + iow(db, DM9000_EPCR, 0x0); /* Clear phyxcer write command */ + + spin_unlock_irqrestore(&db->lock,flags); +} + +static int +dm9000_drv_suspend(struct device *dev, u32 state, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + + if (ndev && level == SUSPEND_DISABLE) { + if (netif_running(ndev)) { + netif_device_detach(ndev); + dm9000_shutdown(ndev); + } + } + return 0; +} + +static int +dm9000_drv_resume(struct device *dev, u32 level) +{ + struct net_device *ndev = dev_get_drvdata(dev); + board_info_t *db = (board_info_t *) ndev->priv; + + if (ndev && level == RESUME_ENABLE) { + + if (netif_running(ndev)) { + dm9000_reset(db); + dm9000_init_dm9000(ndev); + + netif_device_attach(ndev); + } + } + return 0; +} + +static int +dm9000_drv_remove(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct net_device *ndev = dev_get_drvdata(dev); + + dev_set_drvdata(dev, NULL); + + unregister_netdev(ndev); + dm9000_release_board(pdev, (board_info_t *) ndev->priv); + kfree(ndev); /* free device structure */ + + PRINTK1("clean_module() exit\n"); + + return 0; +} + +static struct device_driver dm9000_driver = { + .name = "dm9000", + .bus = &platform_bus_type, + .probe = dm9000_probe, + .remove = dm9000_drv_remove, + .suspend = dm9000_drv_suspend, + .resume = dm9000_drv_resume, +}; + +static int __init +dm9000_init(void) +{ + return driver_register(&dm9000_driver); /* search board and register */ +} + +static void __exit +dm9000_cleanup(void) +{ + driver_unregister(&dm9000_driver); +} + +module_init(dm9000_init); +module_exit(dm9000_cleanup); + +MODULE_AUTHOR("Sascha Hauer, Ben Dooks"); +MODULE_DESCRIPTION("Davicom DM9000 network driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/dm9000.h b/drivers/net/dm9000.h new file mode 100644 index 00000000000..82cad360baf --- /dev/null +++ b/drivers/net/dm9000.h @@ -0,0 +1,135 @@ +/* + * dm9000 Ethernet + */ + +#ifndef _DM9000X_H_ +#define _DM9000X_H_ + +#define DM9000_ID 0x90000A46 + +/* although the registers are 16 bit, they are 32-bit aligned. + */ + +#define DM9000_NCR 0x00 +#define DM9000_NSR 0x01 +#define DM9000_TCR 0x02 +#define DM9000_TSR1 0x03 +#define DM9000_TSR2 0x04 +#define DM9000_RCR 0x05 +#define DM9000_RSR 0x06 +#define DM9000_ROCR 0x07 +#define DM9000_BPTR 0x08 +#define DM9000_FCTR 0x09 +#define DM9000_FCR 0x0A +#define DM9000_EPCR 0x0B +#define DM9000_EPAR 0x0C +#define DM9000_EPDRL 0x0D +#define DM9000_EPDRH 0x0E +#define DM9000_WCR 0x0F + +#define DM9000_PAR 0x10 +#define DM9000_MAR 0x16 + +#define DM9000_GPCR 0x1e +#define DM9000_GPR 0x1f +#define DM9000_TRPAL 0x22 +#define DM9000_TRPAH 0x23 +#define DM9000_RWPAL 0x24 +#define DM9000_RWPAH 0x25 + +#define DM9000_VIDL 0x28 +#define DM9000_VIDH 0x29 +#define DM9000_PIDL 0x2A +#define DM9000_PIDH 0x2B + +#define DM9000_CHIPR 0x2C +#define DM9000_SMCR 0x2F + +#define DM9000_MRCMDX 0xF0 +#define DM9000_MRCMD 0xF2 +#define DM9000_MRRL 0xF4 +#define DM9000_MRRH 0xF5 +#define DM9000_MWCMDX 0xF6 +#define DM9000_MWCMD 0xF8 +#define DM9000_MWRL 0xFA +#define DM9000_MWRH 0xFB +#define DM9000_TXPLL 0xFC +#define DM9000_TXPLH 0xFD +#define DM9000_ISR 0xFE +#define DM9000_IMR 0xFF + +#define NCR_EXT_PHY (1<<7) +#define NCR_WAKEEN (1<<6) +#define NCR_FCOL (1<<4) +#define NCR_FDX (1<<3) +#define NCR_LBK (3<<1) +#define NCR_RST (1<<0) + +#define NSR_SPEED (1<<7) +#define NSR_LINKST (1<<6) +#define NSR_WAKEST (1<<5) +#define NSR_TX2END (1<<3) +#define NSR_TX1END (1<<2) +#define NSR_RXOV (1<<1) + +#define TCR_TJDIS (1<<6) +#define TCR_EXCECM (1<<5) +#define TCR_PAD_DIS2 (1<<4) +#define TCR_CRC_DIS2 (1<<3) +#define TCR_PAD_DIS1 (1<<2) +#define TCR_CRC_DIS1 (1<<1) +#define TCR_TXREQ (1<<0) + +#define TSR_TJTO (1<<7) +#define TSR_LC (1<<6) +#define TSR_NC (1<<5) +#define TSR_LCOL (1<<4) +#define TSR_COL (1<<3) +#define TSR_EC (1<<2) + +#define RCR_WTDIS (1<<6) +#define RCR_DIS_LONG (1<<5) +#define RCR_DIS_CRC (1<<4) +#define RCR_ALL (1<<3) +#define RCR_RUNT (1<<2) +#define RCR_PRMSC (1<<1) +#define RCR_RXEN (1<<0) + +#define RSR_RF (1<<7) +#define RSR_MF (1<<6) +#define RSR_LCS (1<<5) +#define RSR_RWTO (1<<4) +#define RSR_PLE (1<<3) +#define RSR_AE (1<<2) +#define RSR_CE (1<<1) +#define RSR_FOE (1<<0) + +#define FCTR_HWOT(ot) (( ot & 0xf ) << 4 ) +#define FCTR_LWOT(ot) ( ot & 0xf ) + +#define IMR_PAR (1<<7) +#define IMR_ROOM (1<<3) +#define IMR_ROM (1<<2) +#define IMR_PTM (1<<1) +#define IMR_PRM (1<<0) + +#define ISR_ROOS (1<<3) +#define ISR_ROS (1<<2) +#define ISR_PTS (1<<1) +#define ISR_PRS (1<<0) +#define ISR_CLR_STATUS (ISR_ROOS | ISR_ROS | ISR_PTS | ISR_PRS) + +#define EPCR_REEP (1<<5) +#define EPCR_WEP (1<<4) +#define EPCR_EPOS (1<<3) +#define EPCR_ERPRR (1<<2) +#define EPCR_ERPRW (1<<1) +#define EPCR_ERRE (1<<0) + +#define GPCR_GEP_CNTL (1<<0) + +#define DM9000_PKT_RDY 0x01 /* Packet ready to receive */ +#define DM9000_PKT_MAX 1536 /* Received packet max size */ + +#endif /* _DM9000X_H_ */ + diff --git a/drivers/net/e100.c b/drivers/net/e100.c index 1b68dd5a49b..4a47df5a9ff 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -155,9 +155,9 @@ #define DRV_NAME "e100" #define DRV_EXT "-NAPI" -#define DRV_VERSION "3.3.6-k2"DRV_EXT +#define DRV_VERSION "3.4.8-k2"DRV_EXT #define DRV_DESCRIPTION "Intel(R) PRO/100 Network Driver" -#define DRV_COPYRIGHT "Copyright(c) 1999-2004 Intel Corporation" +#define DRV_COPYRIGHT "Copyright(c) 1999-2005 Intel Corporation" #define PFX DRV_NAME ": " #define E100_WATCHDOG_PERIOD (2 * HZ) @@ -210,11 +210,17 @@ static struct pci_device_id e100_id_table[] = { INTEL_8255X_ETHERNET_DEVICE(0x1069, 6), INTEL_8255X_ETHERNET_DEVICE(0x106A, 6), INTEL_8255X_ETHERNET_DEVICE(0x106B, 6), + INTEL_8255X_ETHERNET_DEVICE(0x1091, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1092, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1093, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1094, 7), + INTEL_8255X_ETHERNET_DEVICE(0x1095, 7), INTEL_8255X_ETHERNET_DEVICE(0x1209, 0), INTEL_8255X_ETHERNET_DEVICE(0x1229, 0), INTEL_8255X_ETHERNET_DEVICE(0x2449, 2), INTEL_8255X_ETHERNET_DEVICE(0x2459, 2), INTEL_8255X_ETHERNET_DEVICE(0x245D, 2), + INTEL_8255X_ETHERNET_DEVICE(0x27DC, 7), { 0, } }; MODULE_DEVICE_TABLE(pci, e100_id_table); @@ -269,6 +275,12 @@ enum scb_status { rus_mask = 0x3C, }; +enum ru_state { + RU_SUSPENDED = 0, + RU_RUNNING = 1, + RU_UNINITIALIZED = -1, +}; + enum scb_stat_ack { stat_ack_not_ours = 0x00, stat_ack_sw_gen = 0x04, @@ -510,7 +522,7 @@ struct nic { struct rx *rx_to_use; struct rx *rx_to_clean; struct rfd blank_rfd; - int ru_running; + enum ru_state ru_running; spinlock_t cb_lock ____cacheline_aligned; spinlock_t cmd_lock; @@ -539,6 +551,7 @@ struct nic { struct timer_list watchdog; struct timer_list blink_timer; struct mii_if_info mii; + struct work_struct tx_timeout_task; enum loopback loopback; struct mem *mem; @@ -770,7 +783,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count) return 0; } -#define E100_WAIT_SCB_TIMEOUT 40 +#define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr) { unsigned long flags; @@ -840,6 +853,10 @@ static inline int e100_exec_cb(struct nic *nic, struct sk_buff *skb, * because the controller is too busy, so * let's just queue the command and try again * when another command is scheduled. */ + if(err == -ENOSPC) { + //request a reset + schedule_work(&nic->tx_timeout_task); + } break; } else { nic->cuc_cmd = cuc_resume; @@ -884,7 +901,7 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data) static void e100_get_defaults(struct nic *nic) { - struct param_range rfds = { .min = 64, .max = 256, .count = 64 }; + struct param_range rfds = { .min = 16, .max = 256, .count = 64 }; struct param_range cbs = { .min = 64, .max = 256, .count = 64 }; pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id); @@ -899,8 +916,9 @@ static void e100_get_defaults(struct nic *nic) /* Quadwords to DMA into FIFO before starting frame transmit */ nic->tx_threshold = 0xE0; - nic->tx_command = cpu_to_le16(cb_tx | cb_i | cb_tx_sf | - ((nic->mac >= mac_82558_D101_A4) ? cb_cid : 0)); + /* no interrupt for every tx completion, delay = 256us if not 557*/ + nic->tx_command = cpu_to_le16(cb_tx | cb_tx_sf | + ((nic->mac >= mac_82558_D101_A4) ? cb_cid : cb_i)); /* Template for a freshly allocated RFD */ nic->blank_rfd.command = cpu_to_le16(cb_el); @@ -964,7 +982,8 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb) if(nic->flags & multicast_all) config->multicast_all = 0x1; /* 1=accept, 0=no */ - if(!(nic->flags & wol_magic)) + /* disable WoL when up */ + if(netif_running(nic->netdev) || !(nic->flags & wol_magic)) config->magic_packet_disable = 0x1; /* 1=off, 0=on */ if(nic->mac >= mac_82558_D101_A4) { @@ -1203,7 +1222,9 @@ static void e100_update_stats(struct nic *nic) } } - e100_exec_cmd(nic, cuc_dump_reset, 0); + + if(e100_exec_cmd(nic, cuc_dump_reset, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_dump_reset failed\n"); } static void e100_adjust_adaptive_ifs(struct nic *nic, int speed, int duplex) @@ -1279,12 +1300,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb, struct sk_buff *skb) { cb->command = nic->tx_command; + /* interrupt every 16 packets regardless of delay */ + if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i; cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd); cb->u.tcb.tcb_byte_count = 0; cb->u.tcb.threshold = nic->tx_threshold; cb->u.tcb.tbd_count = 1; cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev, skb->data, skb->len, PCI_DMA_TODEVICE)); + // check for mapping failure? cb->u.tcb.tbd.size = cpu_to_le16(skb->len); } @@ -1297,7 +1321,8 @@ static int e100_xmit_frame(struct sk_buff *skb, struct net_device *netdev) /* SW workaround for ICH[x] 10Mbps/half duplex Tx hang. Issue a NOP command followed by a 1us delay before issuing the Tx command. */ - e100_exec_cmd(nic, cuc_nop, 0); + if(e100_exec_cmd(nic, cuc_nop, 0)) + DPRINTK(TX_ERR, DEBUG, "exec cuc_nop failed\n"); udelay(1); } @@ -1415,12 +1440,18 @@ static int e100_alloc_cbs(struct nic *nic) return 0; } -static inline void e100_start_receiver(struct nic *nic) +static inline void e100_start_receiver(struct nic *nic, struct rx *rx) { + if(!nic->rxs) return; + if(RU_SUSPENDED != nic->ru_running) return; + + /* handle init time starts */ + if(!rx) rx = nic->rxs; + /* (Re)start RU if suspended or idle and RFA is non-NULL */ - if(!nic->ru_running && nic->rx_to_clean->skb) { - e100_exec_cmd(nic, ruc_start, nic->rx_to_clean->dma_addr); - nic->ru_running = 1; + if(rx->skb) { + e100_exec_cmd(nic, ruc_start, rx->dma_addr); + nic->ru_running = RU_RUNNING; } } @@ -1437,6 +1468,13 @@ static inline int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) rx->dma_addr = pci_map_single(nic->pdev, rx->skb->data, RFD_BUF_LEN, PCI_DMA_BIDIRECTIONAL); + if(pci_dma_mapping_error(rx->dma_addr)) { + dev_kfree_skb_any(rx->skb); + rx->skb = 0; + rx->dma_addr = 0; + return -ENOMEM; + } + /* Link the RFD to end of RFA by linking previous RFD to * this one, and clearing EL bit of previous. */ if(rx->prev->skb) { @@ -1471,7 +1509,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, /* If data isn't ready, nothing to indicate */ if(unlikely(!(rfd_status & cb_complete))) - return -EAGAIN; + return -ENODATA; /* Get actual data size */ actual_size = le16_to_cpu(rfd->actual_size) & 0x3FFF; @@ -1482,6 +1520,10 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx, pci_unmap_single(nic->pdev, rx->dma_addr, RFD_BUF_LEN, PCI_DMA_FROMDEVICE); + /* this allows for a fast restart without re-enabling interrupts */ + if(le16_to_cpu(rfd->command) & cb_el) + nic->ru_running = RU_SUSPENDED; + /* Pull off the RFD and put the actual data (minus eth hdr) */ skb_reserve(skb, sizeof(struct rfd)); skb_put(skb, actual_size); @@ -1514,20 +1556,45 @@ static inline void e100_rx_clean(struct nic *nic, unsigned int *work_done, unsigned int work_to_do) { struct rx *rx; + int restart_required = 0; + struct rx *rx_to_start = NULL; + + /* are we already rnr? then pay attention!!! this ensures that + * the state machine progression never allows a start with a + * partially cleaned list, avoiding a race between hardware + * and rx_to_clean when in NAPI mode */ + if(RU_SUSPENDED == nic->ru_running) + restart_required = 1; /* Indicate newly arrived packets */ for(rx = nic->rx_to_clean; rx->skb; rx = nic->rx_to_clean = rx->next) { - if(e100_rx_indicate(nic, rx, work_done, work_to_do)) + int err = e100_rx_indicate(nic, rx, work_done, work_to_do); + if(-EAGAIN == err) { + /* hit quota so have more work to do, restart once + * cleanup is complete */ + restart_required = 0; + break; + } else if(-ENODATA == err) break; /* No more to clean */ } + /* save our starting point as the place we'll restart the receiver */ + if(restart_required) + rx_to_start = nic->rx_to_clean; + /* Alloc new skbs to refill list */ for(rx = nic->rx_to_use; !rx->skb; rx = nic->rx_to_use = rx->next) { if(unlikely(e100_rx_alloc_skb(nic, rx))) break; /* Better luck next time (see watchdog) */ } - e100_start_receiver(nic); + if(restart_required) { + // ack the rnr? + writeb(stat_ack_rnr, &nic->csr->scb.stat_ack); + e100_start_receiver(nic, rx_to_start); + if(work_done) + (*work_done)++; + } } static void e100_rx_clean_list(struct nic *nic) @@ -1535,6 +1602,8 @@ static void e100_rx_clean_list(struct nic *nic) struct rx *rx; unsigned int i, count = nic->params.rfds.count; + nic->ru_running = RU_UNINITIALIZED; + if(nic->rxs) { for(rx = nic->rxs, i = 0; i < count; rx++, i++) { if(rx->skb) { @@ -1548,7 +1617,6 @@ static void e100_rx_clean_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = NULL; - nic->ru_running = 0; } static int e100_rx_alloc_list(struct nic *nic) @@ -1557,6 +1625,7 @@ static int e100_rx_alloc_list(struct nic *nic) unsigned int i, count = nic->params.rfds.count; nic->rx_to_use = nic->rx_to_clean = NULL; + nic->ru_running = RU_UNINITIALIZED; if(!(nic->rxs = kmalloc(sizeof(struct rx) * count, GFP_ATOMIC))) return -ENOMEM; @@ -1572,6 +1641,7 @@ static int e100_rx_alloc_list(struct nic *nic) } nic->rx_to_use = nic->rx_to_clean = nic->rxs; + nic->ru_running = RU_SUSPENDED; return 0; } @@ -1593,7 +1663,7 @@ static irqreturn_t e100_intr(int irq, void *dev_id, struct pt_regs *regs) /* We hit Receive No Resource (RNR); restart RU after cleaning */ if(stat_ack & stat_ack_rnr) - nic->ru_running = 0; + nic->ru_running = RU_SUSPENDED; e100_disable_irq(nic); netif_rx_schedule(netdev); @@ -1663,6 +1733,7 @@ static int e100_change_mtu(struct net_device *netdev, int new_mtu) return 0; } +#ifdef CONFIG_PM static int e100_asf(struct nic *nic) { /* ASF can be enabled from eeprom */ @@ -1671,6 +1742,7 @@ static int e100_asf(struct nic *nic) !(nic->eeprom[eeprom_config_asf] & eeprom_gcl) && ((nic->eeprom[eeprom_smbus_addr] & 0xFF) != 0xFE)); } +#endif static int e100_up(struct nic *nic) { @@ -1683,13 +1755,16 @@ static int e100_up(struct nic *nic) if((err = e100_hw_init(nic))) goto err_clean_cbs; e100_set_multicast_list(nic->netdev); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); mod_timer(&nic->watchdog, jiffies); if((err = request_irq(nic->pdev->irq, e100_intr, SA_SHIRQ, nic->netdev->name, nic->netdev))) goto err_no_irq; - e100_enable_irq(nic); netif_wake_queue(nic->netdev); + netif_poll_enable(nic->netdev); + /* enable ints _after_ enabling poll, preventing a race between + * disable ints+schedule */ + e100_enable_irq(nic); return 0; err_no_irq: @@ -1703,11 +1778,13 @@ err_rx_clean_list: static void e100_down(struct nic *nic) { + /* wait here for poll to complete */ + netif_poll_disable(nic->netdev); + netif_stop_queue(nic->netdev); e100_hw_reset(nic); free_irq(nic->pdev->irq, nic->netdev); del_timer_sync(&nic->watchdog); netif_carrier_off(nic->netdev); - netif_stop_queue(nic->netdev); e100_clean_cbs(nic); e100_rx_clean_list(nic); } @@ -1716,6 +1793,15 @@ static void e100_tx_timeout(struct net_device *netdev) { struct nic *nic = netdev_priv(netdev); + /* Reset outside of interrupt context, to avoid request_irq + * in interrupt context */ + schedule_work(&nic->tx_timeout_task); +} + +static void e100_tx_timeout_task(struct net_device *netdev) +{ + struct nic *nic = netdev_priv(netdev); + DPRINTK(TX_ERR, DEBUG, "scb.status=0x%02X\n", readb(&nic->csr->scb.status)); e100_down(netdev_priv(netdev)); @@ -1749,7 +1835,7 @@ static int e100_loopback_test(struct nic *nic, enum loopback loopback_mode) mdio_write(nic->netdev, nic->mii.phy_id, MII_BMCR, BMCR_LOOPBACK); - e100_start_receiver(nic); + e100_start_receiver(nic, 0); if(!(skb = dev_alloc_skb(ETH_DATA_LEN))) { err = -ENOMEM; @@ -1869,7 +1955,6 @@ static int e100_set_wol(struct net_device *netdev, struct ethtool_wolinfo *wol) else nic->flags &= ~wol_magic; - pci_enable_wake(nic->pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); e100_exec_cb(nic, NULL, e100_configure); return 0; @@ -2223,6 +2308,7 @@ static int __devinit e100_probe(struct pci_dev *pdev, e100_get_defaults(nic); + /* locks must be initialized before calling hw_reset */ spin_lock_init(&nic->cb_lock); spin_lock_init(&nic->cmd_lock); @@ -2240,6 +2326,9 @@ static int __devinit e100_probe(struct pci_dev *pdev, nic->blink_timer.function = e100_blink_led; nic->blink_timer.data = (unsigned long)nic; + INIT_WORK(&nic->tx_timeout_task, + (void (*)(void *))e100_tx_timeout_task, netdev); + if((err = e100_alloc(nic))) { DPRINTK(PROBE, ERR, "Cannot alloc driver memory, aborting.\n"); goto err_out_iounmap; @@ -2263,7 +2352,8 @@ static int __devinit e100_probe(struct pci_dev *pdev, (nic->eeprom[eeprom_id] & eeprom_id_wol)) nic->flags |= wol_magic; - pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) { @@ -2335,7 +2425,10 @@ static int e100_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); - e100_hw_init(nic); + /* ack any pending wake events, disable PME */ + pci_enable_wake(pdev, 0, 0); + if(e100_hw_init(nic)) + DPRINTK(HW, ERR, "e100_hw_init failed\n"); netif_device_attach(netdev); if(netif_running(netdev)) @@ -2345,6 +2438,21 @@ static int e100_resume(struct pci_dev *pdev) } #endif + +static void e100_shutdown(struct device *dev) +{ + struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct net_device *netdev = pci_get_drvdata(pdev); + struct nic *nic = netdev_priv(netdev); + +#ifdef CONFIG_PM + pci_enable_wake(pdev, 0, nic->flags & (wol_magic | e100_asf(nic))); +#else + pci_enable_wake(pdev, 0, nic->flags & (wol_magic)); +#endif +} + + static struct pci_driver e100_driver = { .name = DRV_NAME, .id_table = e100_id_table, @@ -2354,6 +2462,11 @@ static struct pci_driver e100_driver = { .suspend = e100_suspend, .resume = e100_resume, #endif + + .driver = { + .shutdown = e100_shutdown, + } + }; static int __init e100_init_module(void) diff --git a/drivers/net/e1000/e1000.h b/drivers/net/e1000/e1000.h index 148930d4e9b..af1e82c5b80 100644 --- a/drivers/net/e1000/e1000.h +++ b/drivers/net/e1000/e1000.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -112,6 +112,8 @@ struct e1000_adapter; #define E1000_MAX_82544_RXD 4096 /* Supported Rx Buffer Sizes */ +#define E1000_RXBUFFER_128 128 /* Used for packet split */ +#define E1000_RXBUFFER_256 256 /* Used for packet split */ #define E1000_RXBUFFER_2048 2048 #define E1000_RXBUFFER_4096 4096 #define E1000_RXBUFFER_8192 8192 @@ -137,15 +139,19 @@ struct e1000_adapter; /* How many Rx Buffers do we bundle into one write to the hardware ? */ #define E1000_RX_BUFFER_WRITE 16 /* Must be power of 2 */ -#define AUTO_ALL_MODES 0 -#define E1000_EEPROM_82544_APM 0x0004 -#define E1000_EEPROM_APME 0x0400 +#define AUTO_ALL_MODES 0 +#define E1000_EEPROM_82544_APM 0x0400 +#define E1000_EEPROM_APME 0x0400 #ifndef E1000_MASTER_SLAVE /* Switch to override PHY master/slave setting */ #define E1000_MASTER_SLAVE e1000_ms_hw_default #endif +#define E1000_MNG_VLAN_NONE -1 +/* Number of packet split data buffers (not including the header buffer) */ +#define PS_PAGE_BUFFERS MAX_PS_BUFFERS-1 + /* only works for sizes that are powers of 2 */ #define E1000_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) @@ -159,6 +165,9 @@ struct e1000_buffer { uint16_t next_to_watch; }; +struct e1000_ps_page { struct page *ps_page[MAX_PS_BUFFERS]; }; +struct e1000_ps_page_dma { uint64_t ps_page_dma[MAX_PS_BUFFERS]; }; + struct e1000_desc_ring { /* pointer to the descriptor ring memory */ void *desc; @@ -174,12 +183,19 @@ struct e1000_desc_ring { unsigned int next_to_clean; /* array of buffer information structs */ struct e1000_buffer *buffer_info; + /* arrays of page information for packet split */ + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; }; #define E1000_DESC_UNUSED(R) \ ((((R)->next_to_clean > (R)->next_to_use) ? 0 : (R)->count) + \ (R)->next_to_clean - (R)->next_to_use - 1) +#define E1000_RX_DESC_PS(R, i) \ + (&(((union e1000_rx_desc_packet_split *)((R).desc))[i])) +#define E1000_RX_DESC_EXT(R, i) \ + (&(((union e1000_rx_desc_extended *)((R).desc))[i])) #define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i])) #define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc) #define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc) @@ -192,6 +208,7 @@ struct e1000_adapter { struct timer_list watchdog_timer; struct timer_list phy_info_timer; struct vlan_group *vlgrp; + uint16_t mng_vlan_id; uint32_t bd_number; uint32_t rx_buffer_len; uint32_t part_num; @@ -228,14 +245,23 @@ struct e1000_adapter { boolean_t detect_tx_hung; /* RX */ +#ifdef CONFIG_E1000_NAPI + boolean_t (*clean_rx) (struct e1000_adapter *adapter, int *work_done, + int work_to_do); +#else + boolean_t (*clean_rx) (struct e1000_adapter *adapter); +#endif + void (*alloc_rx_buf) (struct e1000_adapter *adapter); struct e1000_desc_ring rx_ring; uint64_t hw_csum_err; uint64_t hw_csum_good; uint32_t rx_int_delay; uint32_t rx_abs_int_delay; boolean_t rx_csum; + boolean_t rx_ps; uint32_t gorcl; uint64_t gorcl_old; + uint16_t rx_ps_bsize0; /* Interrupt Throttle Rate */ uint32_t itr; @@ -257,5 +283,8 @@ struct e1000_adapter { int msg_enable; +#ifdef CONFIG_PCI_MSI + boolean_t have_msi; +#endif }; #endif /* _E1000_H_ */ diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 0a2ca7c73a4..237247f74df 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -69,6 +69,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = { { "rx_crc_errors", E1000_STAT(net_stats.rx_crc_errors) }, { "rx_frame_errors", E1000_STAT(net_stats.rx_frame_errors) }, { "rx_fifo_errors", E1000_STAT(net_stats.rx_fifo_errors) }, + { "rx_no_buffer_count", E1000_STAT(stats.rnbc) }, { "rx_missed_errors", E1000_STAT(net_stats.rx_missed_errors) }, { "tx_aborted_errors", E1000_STAT(net_stats.tx_aborted_errors) }, { "tx_carrier_errors", E1000_STAT(net_stats.tx_carrier_errors) }, @@ -593,7 +594,7 @@ e1000_set_ringparam(struct net_device *netdev, tx_old = adapter->tx_ring; rx_old = adapter->rx_ring; - if ((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) + if((ring->rx_mini_pending) || (ring->rx_jumbo_pending)) return -EINVAL; if(netif_running(adapter->netdev)) @@ -784,8 +785,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) /* Hook up test interrupt handler just for this test */ if(!request_irq(irq, &e1000_test_intr, 0, netdev->name, netdev)) { shared_int = FALSE; - } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, - netdev->name, netdev)){ + } else if(request_irq(irq, &e1000_test_intr, SA_SHIRQ, + netdev->name, netdev)){ *data = 1; return -1; } @@ -842,10 +843,8 @@ e1000_intr_test(struct e1000_adapter *adapter, uint64_t *data) * test failed. */ adapter->test_icr = 0; - E1000_WRITE_REG(&adapter->hw, IMC, - (~mask & 0x00007FFF)); - E1000_WRITE_REG(&adapter->hw, ICS, - (~mask & 0x00007FFF)); + E1000_WRITE_REG(&adapter->hw, IMC, ~mask & 0x00007FFF); + E1000_WRITE_REG(&adapter->hw, ICS, ~mask & 0x00007FFF); msec_delay(10); if(adapter->test_icr) { @@ -919,7 +918,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Tx descriptor ring and Tx buffers */ - txdr->count = 80; + if(!txdr->count) + txdr->count = E1000_DEFAULT_TXD; size = txdr->count * sizeof(struct e1000_buffer); if(!(txdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -974,7 +974,8 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) /* Setup Rx descriptor ring and Rx buffers */ - rxdr->count = 80; + if(!rxdr->count) + rxdr->count = E1000_DEFAULT_RXD; size = rxdr->count * sizeof(struct e1000_buffer); if(!(rxdr->buffer_info = kmalloc(size, GFP_KERNEL))) { @@ -1008,7 +1009,7 @@ e1000_setup_desc_rings(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i); struct sk_buff *skb; - if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, + if(!(skb = alloc_skb(E1000_RXBUFFER_2048 + NET_IP_ALIGN, GFP_KERNEL))) { ret_val = 6; goto err_nomem; @@ -1310,31 +1311,62 @@ e1000_run_loopback_test(struct e1000_adapter *adapter) struct e1000_desc_ring *txdr = &adapter->test_tx_ring; struct e1000_desc_ring *rxdr = &adapter->test_rx_ring; struct pci_dev *pdev = adapter->pdev; - int i, ret_val; + int i, j, k, l, lc, good_cnt, ret_val=0; + unsigned long time; E1000_WRITE_REG(&adapter->hw, RDT, rxdr->count - 1); - for(i = 0; i < 64; i++) { - e1000_create_lbtest_frame(txdr->buffer_info[i].skb, 1024); - pci_dma_sync_single_for_device(pdev, txdr->buffer_info[i].dma, - txdr->buffer_info[i].length, - PCI_DMA_TODEVICE); - } - E1000_WRITE_REG(&adapter->hw, TDT, i); - - msec_delay(200); - - i = 0; - do { - pci_dma_sync_single_for_cpu(pdev, rxdr->buffer_info[i].dma, - rxdr->buffer_info[i].length, - PCI_DMA_FROMDEVICE); - - ret_val = e1000_check_lbtest_frame(rxdr->buffer_info[i].skb, - 1024); - i++; - } while (ret_val != 0 && i < 64); + /* Calculate the loop count based on the largest descriptor ring + * The idea is to wrap the largest ring a number of times using 64 + * send/receive pairs during each loop + */ + if(rxdr->count <= txdr->count) + lc = ((txdr->count / 64) * 2) + 1; + else + lc = ((rxdr->count / 64) * 2) + 1; + + k = l = 0; + for(j = 0; j <= lc; j++) { /* loop count loop */ + for(i = 0; i < 64; i++) { /* send the packets */ + e1000_create_lbtest_frame(txdr->buffer_info[i].skb, + 1024); + pci_dma_sync_single_for_device(pdev, + txdr->buffer_info[k].dma, + txdr->buffer_info[k].length, + PCI_DMA_TODEVICE); + if(unlikely(++k == txdr->count)) k = 0; + } + E1000_WRITE_REG(&adapter->hw, TDT, k); + msec_delay(200); + time = jiffies; /* set the start time for the receive */ + good_cnt = 0; + do { /* receive the sent packets */ + pci_dma_sync_single_for_cpu(pdev, + rxdr->buffer_info[l].dma, + rxdr->buffer_info[l].length, + PCI_DMA_FROMDEVICE); + + ret_val = e1000_check_lbtest_frame( + rxdr->buffer_info[l].skb, + 1024); + if(!ret_val) + good_cnt++; + if(unlikely(++l == rxdr->count)) l = 0; + /* time + 20 msecs (200 msecs on 2.4) is more than + * enough time to complete the receives, if it's + * exceeded, break and error off + */ + } while (good_cnt < 64 && jiffies < (time + 20)); + if(good_cnt != 64) { + ret_val = 13; /* ret_val is the same as mis-compare */ + break; + } + if(jiffies >= (time + 2)) { + ret_val = 14; /* error code for time out error */ + break; + } + } /* end loop count loop */ return ret_val; } @@ -1354,13 +1386,12 @@ static int e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) { *data = 0; - if (adapter->hw.media_type == e1000_media_type_internal_serdes) { int i = 0; adapter->hw.serdes_link_down = TRUE; - /* on some blade server designs link establishment */ - /* could take as long as 2-3 minutes. */ + /* On some blade server designs, link establishment + * could take as long as 2-3 minutes */ do { e1000_check_for_link(&adapter->hw); if (adapter->hw.serdes_link_down == FALSE) @@ -1368,9 +1399,11 @@ e1000_link_test(struct e1000_adapter *adapter, uint64_t *data) msec_delay(20); } while (i++ < 3750); - *data = 1; + *data = 1; } else { e1000_check_for_link(&adapter->hw); + if(adapter->hw.autoneg) /* if auto_neg is set wait for it */ + msec_delay(4000); if(!(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_LU)) { *data = 1; diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 786a9b93565..723589b28be 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -63,10 +63,11 @@ static uint16_t e1000_shift_in_ee_bits(struct e1000_hw *hw, uint16_t count); static int32_t e1000_acquire_eeprom(struct e1000_hw *hw); static void e1000_release_eeprom(struct e1000_hw *hw); static void e1000_standby_eeprom(struct e1000_hw *hw); -static int32_t e1000_id_led_init(struct e1000_hw * hw); static int32_t e1000_set_vco_speed(struct e1000_hw *hw); static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw); static int32_t e1000_set_phy_mode(struct e1000_hw *hw); +static int32_t e1000_host_if_read_cookie(struct e1000_hw *hw, uint8_t *buffer); +static uint8_t e1000_calculate_mng_checksum(char *buffer, uint32_t length); /* IGP cable length table */ static const @@ -80,6 +81,17 @@ uint16_t e1000_igp_cable_length_table[IGP01E1000_AGC_LENGTH_TABLE_SIZE] = 100, 100, 100, 100, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 110, 120, 120, 120, 120, 120, 120, 120, 120, 120, 120}; +static const +uint16_t e1000_igp_2_cable_length_table[IGP02E1000_AGC_LENGTH_TABLE_SIZE] = + { 8, 13, 17, 19, 21, 23, 25, 27, 29, 31, 33, 35, 37, 39, 41, 43, + 22, 24, 27, 30, 32, 35, 37, 40, 42, 44, 47, 49, 51, 54, 56, 58, + 32, 35, 38, 41, 44, 47, 50, 53, 55, 58, 61, 63, 66, 69, 71, 74, + 43, 47, 51, 54, 58, 61, 64, 67, 71, 74, 77, 80, 82, 85, 88, 90, + 57, 62, 66, 70, 74, 77, 81, 85, 88, 91, 94, 97, 100, 103, 106, 108, + 73, 78, 82, 87, 91, 95, 98, 102, 105, 109, 112, 114, 117, 119, 122, 124, + 91, 96, 101, 105, 109, 113, 116, 119, 122, 125, 127, 128, 128, 128, 128, 128, + 108, 113, 117, 121, 124, 127, 128, 128, 128, 128, 128, 128, 128, 128, 128, 128}; + /****************************************************************************** * Set the phy type member in the hw struct. @@ -91,10 +103,14 @@ e1000_set_phy_type(struct e1000_hw *hw) { DEBUGFUNC("e1000_set_phy_type"); + if(hw->mac_type == e1000_undefined) + return -E1000_ERR_PHY_TYPE; + switch(hw->phy_id) { case M88E1000_E_PHY_ID: case M88E1000_I_PHY_ID: case M88E1011_I_PHY_ID: + case M88E1111_I_PHY_ID: hw->phy_type = e1000_phy_m88; break; case IGP01E1000_I_PHY_ID: @@ -128,7 +144,6 @@ e1000_phy_init_script(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_init_script"); - if(hw->phy_init_script) { msec_delay(20); @@ -271,6 +286,7 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82546GB_FIBER: case E1000_DEV_ID_82546GB_SERDES: case E1000_DEV_ID_82546GB_PCIE: + case E1000_DEV_ID_82546GB_QUAD_COPPER: hw->mac_type = e1000_82546_rev_3; break; case E1000_DEV_ID_82541EI: @@ -289,12 +305,19 @@ e1000_set_mac_type(struct e1000_hw *hw) case E1000_DEV_ID_82547GI: hw->mac_type = e1000_82547_rev_2; break; + case E1000_DEV_ID_82573E: + case E1000_DEV_ID_82573E_IAMT: + hw->mac_type = e1000_82573; + break; default: /* Should never have loaded on this device */ return -E1000_ERR_MAC_TYPE; } switch(hw->mac_type) { + case e1000_82573: + hw->eeprom_semaphore_present = TRUE; + /* fall through */ case e1000_82541: case e1000_82547: case e1000_82541_rev_2: @@ -360,6 +383,9 @@ e1000_reset_hw(struct e1000_hw *hw) uint32_t icr; uint32_t manc; uint32_t led_ctrl; + uint32_t timeout; + uint32_t extcnf_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_reset_hw"); @@ -369,6 +395,15 @@ e1000_reset_hw(struct e1000_hw *hw) e1000_pci_clear_mwi(hw); } + if(hw->bus_type == e1000_bus_type_pci_express) { + /* Prevent the PCI-E bus from sticking if there is no TLP connection + * on the last TLP read/write transaction when MAC is reset. + */ + if(e1000_disable_pciex_master(hw) != E1000_SUCCESS) { + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + } + } + /* Clear interrupt mask to stop board from generating interrupts */ DEBUGOUT("Masking off all interrupts\n"); E1000_WRITE_REG(hw, IMC, 0xffffffff); @@ -393,10 +428,32 @@ e1000_reset_hw(struct e1000_hw *hw) /* Must reset the PHY before resetting the MAC */ if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - E1000_WRITE_REG_IO(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); + E1000_WRITE_REG(hw, CTRL, (ctrl | E1000_CTRL_PHY_RST)); msec_delay(5); } + /* Must acquire the MDIO ownership before MAC reset. + * Ownership defaults to firmware after a reset. */ + if(hw->mac_type == e1000_82573) { + timeout = 10; + + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + do { + E1000_WRITE_REG(hw, EXTCNF_CTRL, extcnf_ctrl); + extcnf_ctrl = E1000_READ_REG(hw, EXTCNF_CTRL); + + if(extcnf_ctrl & E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP) + break; + else + extcnf_ctrl |= E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP; + + msec_delay(2); + timeout--; + } while(timeout); + } + /* Issue a global reset to the MAC. This will reset the chip's * transmit, receive, DMA, and link units. It will not effect * the current PCI configuration. The global reset bit is self- @@ -450,6 +507,18 @@ e1000_reset_hw(struct e1000_hw *hw) /* Wait for EEPROM reload */ msec_delay(20); break; + case e1000_82573: + udelay(10); + ctrl_ext = E1000_READ_REG(hw, CTRL_EXT); + ctrl_ext |= E1000_CTRL_EXT_EE_RST; + E1000_WRITE_REG(hw, CTRL_EXT, ctrl_ext); + E1000_WRITE_FLUSH(hw); + /* fall through */ + ret_val = e1000_get_auto_rd_done(hw); + if(ret_val) + /* We don't want to continue accessing MAC registers. */ + return ret_val; + break; default: /* Wait for EEPROM reload (it happens automatically) */ msec_delay(5); @@ -457,7 +526,7 @@ e1000_reset_hw(struct e1000_hw *hw) } /* Disable HW ARPs on ASF enabled adapters */ - if(hw->mac_type >= e1000_82540) { + if(hw->mac_type >= e1000_82540 && hw->mac_type <= e1000_82547_rev_2) { manc = E1000_READ_REG(hw, MANC); manc &= ~(E1000_MANC_ARP_EN); E1000_WRITE_REG(hw, MANC, manc); @@ -510,6 +579,8 @@ e1000_init_hw(struct e1000_hw *hw) uint16_t pcix_stat_hi_word; uint16_t cmd_mmrbc; uint16_t stat_mmrbc; + uint32_t mta_size; + DEBUGFUNC("e1000_init_hw"); /* Initialize Identification LED */ @@ -524,8 +595,8 @@ e1000_init_hw(struct e1000_hw *hw) /* Disabling VLAN filtering. */ DEBUGOUT("Initializing the IEEE VLAN\n"); - E1000_WRITE_REG(hw, VET, 0); - + if (hw->mac_type < e1000_82545_rev_3) + E1000_WRITE_REG(hw, VET, 0); e1000_clear_vfta(hw); /* For 82542 (rev 2.0), disable MWI and put the receiver into reset */ @@ -553,14 +624,16 @@ e1000_init_hw(struct e1000_hw *hw) /* Zero out the Multicast HASH table */ DEBUGOUT("Zeroing the MTA\n"); - for(i = 0; i < E1000_MC_TBL_SIZE; i++) + mta_size = E1000_MC_TBL_SIZE; + for(i = 0; i < mta_size; i++) E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); /* Set the PCI priority bit correctly in the CTRL register. This * determines if the adapter gives priority to receives, or if it - * gives equal priority to transmits and receives. + * gives equal priority to transmits and receives. Valid only on + * 82542 and 82543 silicon. */ - if(hw->dma_fairness) { + if(hw->dma_fairness && hw->mac_type <= e1000_82543) { ctrl = E1000_READ_REG(hw, CTRL); E1000_WRITE_REG(hw, CTRL, ctrl | E1000_CTRL_PRIOR); } @@ -598,9 +671,21 @@ e1000_init_hw(struct e1000_hw *hw) if(hw->mac_type > e1000_82544) { ctrl = E1000_READ_REG(hw, TXDCTL); ctrl = (ctrl & ~E1000_TXDCTL_WTHRESH) | E1000_TXDCTL_FULL_TX_DESC_WB; + switch (hw->mac_type) { + default: + break; + case e1000_82573: + ctrl |= E1000_TXDCTL_COUNT_DESC; + break; + } E1000_WRITE_REG(hw, TXDCTL, ctrl); } + if (hw->mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(hw); + } + + /* Clear all of the statistics registers (clear on read). It is * important that we do this after we have tried to establish link * because the symbol error count will increment wildly if there @@ -679,7 +764,7 @@ e1000_setup_link(struct e1000_hw *hw) * control setting, then the variable hw->fc will * be initialized based on a value in the EEPROM. */ - if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data) < 0) { + if(e1000_read_eeprom(hw, EEPROM_INIT_CONTROL2_REG, 1, &eeprom_data)) { DEBUGOUT("EEPROM Read Error\n"); return -E1000_ERR_EEPROM; } @@ -736,6 +821,7 @@ e1000_setup_link(struct e1000_hw *hw) E1000_WRITE_REG(hw, FCAL, FLOW_CONTROL_ADDRESS_LOW); E1000_WRITE_REG(hw, FCAH, FLOW_CONTROL_ADDRESS_HIGH); E1000_WRITE_REG(hw, FCT, FLOW_CONTROL_TYPE); + E1000_WRITE_REG(hw, FCTTV, hw->fc_pause_time); /* Set the flow control receive threshold registers. Normally, @@ -906,20 +992,18 @@ e1000_setup_fiber_serdes_link(struct e1000_hw *hw) } /****************************************************************************** -* Detects which PHY is present and the speed and duplex +* Make sure we have a valid PHY and change PHY mode before link setup. * * hw - Struct containing variables accessed by shared code ******************************************************************************/ static int32_t -e1000_setup_copper_link(struct e1000_hw *hw) +e1000_copper_link_preconfig(struct e1000_hw *hw) { uint32_t ctrl; - uint32_t led_ctrl; int32_t ret_val; - uint16_t i; uint16_t phy_data; - DEBUGFUNC("e1000_setup_copper_link"); + DEBUGFUNC("e1000_copper_link_preconfig"); ctrl = E1000_READ_REG(hw, CTRL); /* With 82543, we need to force speed and duplex on the MAC equal to what @@ -933,7 +1017,9 @@ e1000_setup_copper_link(struct e1000_hw *hw) } else { ctrl |= (E1000_CTRL_FRCSPD | E1000_CTRL_FRCDPX | E1000_CTRL_SLU); E1000_WRITE_REG(hw, CTRL, ctrl); - e1000_phy_hw_reset(hw); + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; } /* Make sure we have a valid PHY */ @@ -961,274 +1047,398 @@ e1000_setup_copper_link(struct e1000_hw *hw) hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) hw->phy_reset_disable = FALSE; - if(!hw->phy_reset_disable) { - if (hw->phy_type == e1000_phy_igp) { + return E1000_SUCCESS; +} - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } - /* Wait 10ms for MAC to configure PHY from eeprom settings */ - msec_delay(15); +/******************************************************************** +* Copper link setup for e1000_phy_igp series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_igp_setup(struct e1000_hw *hw) +{ + uint32_t led_ctrl; + int32_t ret_val; + uint16_t phy_data; - /* Configure activity LED after PHY reset */ - led_ctrl = E1000_READ_REG(hw, LEDCTL); - led_ctrl &= IGP_ACTIVITY_LED_MASK; - led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); - E1000_WRITE_REG(hw, LEDCTL, led_ctrl); + DEBUGFUNC("e1000_copper_link_igp_setup"); - /* disable lplu d3 during driver init */ - ret_val = e1000_set_d3_lplu_state(hw, FALSE); - if(ret_val) { - DEBUGOUT("Error Disabling LPLU D3\n"); - return ret_val; - } + if (hw->phy_reset_disable) + return E1000_SUCCESS; + + ret_val = e1000_phy_reset(hw); + if (ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } - /* Configure mdi-mdix settings */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - &phy_data); - if(ret_val) - return ret_val; + /* Wait 10ms for MAC to configure PHY from eeprom settings */ + msec_delay(15); - if((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { - hw->dsp_config_state = e1000_dsp_config_disabled; - /* Force MDI for earlier revs of the IGP PHY */ - phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | - IGP01E1000_PSCR_FORCE_MDI_MDIX); - hw->mdix = 1; + /* Configure activity LED after PHY reset */ + led_ctrl = E1000_READ_REG(hw, LEDCTL); + led_ctrl &= IGP_ACTIVITY_LED_MASK; + led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); + E1000_WRITE_REG(hw, LEDCTL, led_ctrl); - } else { - hw->dsp_config_state = e1000_dsp_config_enabled; - phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - - switch (hw->mdix) { - case 1: - phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 2: - phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; - break; - case 0: - default: - phy_data |= IGP01E1000_PSCR_AUTO_MDIX; - break; - } - } - ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, - phy_data); - if(ret_val) - return ret_val; + /* disable lplu d3 during driver init */ + ret_val = e1000_set_d3_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D3\n"); + return ret_val; + } - /* set auto-master slave resolution settings */ - if(hw->autoneg) { - e1000_ms_type phy_ms_setting = hw->master_slave; + /* disable lplu d0 during driver init */ + ret_val = e1000_set_d0_lplu_state(hw, FALSE); + if (ret_val) { + DEBUGOUT("Error Disabling LPLU D0\n"); + return ret_val; + } + /* Configure mdi-mdix settings */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, &phy_data); + if (ret_val) + return ret_val; - if(hw->ffe_config_state == e1000_ffe_config_active) - hw->ffe_config_state = e1000_ffe_config_enabled; + if ((hw->mac_type == e1000_82541) || (hw->mac_type == e1000_82547)) { + hw->dsp_config_state = e1000_dsp_config_disabled; + /* Force MDI for earlier revs of the IGP PHY */ + phy_data &= ~(IGP01E1000_PSCR_AUTO_MDIX | IGP01E1000_PSCR_FORCE_MDI_MDIX); + hw->mdix = 1; - if(hw->dsp_config_state == e1000_dsp_config_activated) - hw->dsp_config_state = e1000_dsp_config_enabled; + } else { + hw->dsp_config_state = e1000_dsp_config_enabled; + phy_data &= ~IGP01E1000_PSCR_AUTO_MDIX; - /* when autonegotiation advertisment is only 1000Mbps then we - * should disable SmartSpeed and enable Auto MasterSlave - * resolution as hardware default. */ - if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { - /* Disable SmartSpeed */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, - &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; - ret_val = e1000_write_phy_reg(hw, - IGP01E1000_PHY_PORT_CONFIG, - phy_data); - if(ret_val) - return ret_val; - /* Set auto Master/Slave resolution process */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; - phy_data &= ~CR_1000T_MS_ENABLE; - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } + switch (hw->mdix) { + case 1: + phy_data &= ~IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 2: + phy_data |= IGP01E1000_PSCR_FORCE_MDI_MDIX; + break; + case 0: + default: + phy_data |= IGP01E1000_PSCR_AUTO_MDIX; + break; + } + } + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CTRL, phy_data); + if(ret_val) + return ret_val; - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); - if(ret_val) - return ret_val; + /* set auto-master slave resolution settings */ + if(hw->autoneg) { + e1000_ms_type phy_ms_setting = hw->master_slave; - /* load defaults for future use */ - hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? - ((phy_data & CR_1000T_MS_VALUE) ? - e1000_ms_force_master : - e1000_ms_force_slave) : - e1000_ms_auto; - - switch (phy_ms_setting) { - case e1000_ms_force_master: - phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); - break; - case e1000_ms_force_slave: - phy_data |= CR_1000T_MS_ENABLE; - phy_data &= ~(CR_1000T_MS_VALUE); - break; - case e1000_ms_auto: - phy_data &= ~CR_1000T_MS_ENABLE; - default: - break; - } - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); - if(ret_val) - return ret_val; - } - } else { - /* Enable CRS on TX. This must be set for half-duplex operation. */ - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - &phy_data); + if(hw->ffe_config_state == e1000_ffe_config_active) + hw->ffe_config_state = e1000_ffe_config_enabled; + + if(hw->dsp_config_state == e1000_dsp_config_activated) + hw->dsp_config_state = e1000_dsp_config_enabled; + + /* when autonegotiation advertisment is only 1000Mbps then we + * should disable SmartSpeed and enable Auto MasterSlave + * resolution as hardware default. */ + if(hw->autoneg_advertised == ADVERTISE_1000_FULL) { + /* Disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); + if(ret_val) + return ret_val; + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, + IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + /* Set auto Master/Slave resolution process */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; + phy_data &= ~CR_1000T_MS_ENABLE; + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); if(ret_val) return ret_val; + } - phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &phy_data); + if(ret_val) + return ret_val; - /* Options: - * MDI/MDI-X = 0 (default) - * 0 - Auto for all speeds - * 1 - MDI mode - * 2 - MDI-X mode - * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) - */ - phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + /* load defaults for future use */ + hw->original_master_slave = (phy_data & CR_1000T_MS_ENABLE) ? + ((phy_data & CR_1000T_MS_VALUE) ? + e1000_ms_force_master : + e1000_ms_force_slave) : + e1000_ms_auto; - switch (hw->mdix) { - case 1: - phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; - break; - case 2: - phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; - break; - case 3: - phy_data |= M88E1000_PSCR_AUTO_X_1000T; - break; - case 0: + switch (phy_ms_setting) { + case e1000_ms_force_master: + phy_data |= (CR_1000T_MS_ENABLE | CR_1000T_MS_VALUE); + break; + case e1000_ms_force_slave: + phy_data |= CR_1000T_MS_ENABLE; + phy_data &= ~(CR_1000T_MS_VALUE); + break; + case e1000_ms_auto: + phy_data &= ~CR_1000T_MS_ENABLE; default: - phy_data |= M88E1000_PSCR_AUTO_X_MODE; - break; - } + break; + } + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, phy_data); + if(ret_val) + return ret_val; + } - /* Options: - * disable_polarity_correction = 0 (default) - * Automatic Correction for Reversed Cable Polarity - * 0 - Disabled - * 1 - Enabled - */ - phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; - if(hw->disable_polarity_correction == 1) - phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; - ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, - phy_data); - if(ret_val) - return ret_val; + return E1000_SUCCESS; +} - /* Force TX_CLK in the Extended PHY Specific Control Register - * to 25MHz clock. - */ - ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - &phy_data); - if(ret_val) - return ret_val; - phy_data |= M88E1000_EPSCR_TX_CLK_25; +/******************************************************************** +* Copper link setup for e1000_phy_m88 series. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_mgp_setup(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; + + DEBUGFUNC("e1000_copper_link_mgp_setup"); + + if(hw->phy_reset_disable) + return E1000_SUCCESS; + + /* Enable CRS on TX. This must be set for half-duplex operation. */ + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX; + + /* Options: + * MDI/MDI-X = 0 (default) + * 0 - Auto for all speeds + * 1 - MDI mode + * 2 - MDI-X mode + * 3 - Auto for 1000Base-T only (MDI-X for 10/100Base-T modes) + */ + phy_data &= ~M88E1000_PSCR_AUTO_X_MODE; + + switch (hw->mdix) { + case 1: + phy_data |= M88E1000_PSCR_MDI_MANUAL_MODE; + break; + case 2: + phy_data |= M88E1000_PSCR_MDIX_MANUAL_MODE; + break; + case 3: + phy_data |= M88E1000_PSCR_AUTO_X_1000T; + break; + case 0: + default: + phy_data |= M88E1000_PSCR_AUTO_X_MODE; + break; + } + + /* Options: + * disable_polarity_correction = 0 (default) + * Automatic Correction for Reversed Cable Polarity + * 0 - Disabled + * 1 - Enabled + */ + phy_data &= ~M88E1000_PSCR_POLARITY_REVERSAL; + if(hw->disable_polarity_correction == 1) + phy_data |= M88E1000_PSCR_POLARITY_REVERSAL; + ret_val = e1000_write_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, phy_data); + if(ret_val) + return ret_val; - if (hw->phy_revision < M88E1011_I_REV_4) { - /* Configure Master and Slave downshift values */ - phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | + /* Force TX_CLK in the Extended PHY Specific Control Register + * to 25MHz clock. + */ + ret_val = e1000_read_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= M88E1000_EPSCR_TX_CLK_25; + + if (hw->phy_revision < M88E1011_I_REV_4) { + /* Configure Master and Slave downshift values */ + phy_data &= ~(M88E1000_EPSCR_MASTER_DOWNSHIFT_MASK | M88E1000_EPSCR_SLAVE_DOWNSHIFT_MASK); - phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | + phy_data |= (M88E1000_EPSCR_MASTER_DOWNSHIFT_1X | M88E1000_EPSCR_SLAVE_DOWNSHIFT_1X); - ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, - phy_data); - if(ret_val) - return ret_val; - } + ret_val = e1000_write_phy_reg(hw, M88E1000_EXT_PHY_SPEC_CTRL, phy_data); + if(ret_val) + return ret_val; + } - /* SW Reset the PHY so all changes take effect */ - ret_val = e1000_phy_reset(hw); - if(ret_val) { - DEBUGOUT("Error Resetting the PHY\n"); - return ret_val; - } + /* SW Reset the PHY so all changes take effect */ + ret_val = e1000_phy_reset(hw); + if(ret_val) { + DEBUGOUT("Error Resetting the PHY\n"); + return ret_val; + } + + return E1000_SUCCESS; +} + +/******************************************************************** +* Setup auto-negotiation and flow control advertisements, +* and then perform auto-negotiation. +* +* hw - Struct containing variables accessed by shared code +*********************************************************************/ +static int32_t +e1000_copper_link_autoneg(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t phy_data; + + DEBUGFUNC("e1000_copper_link_autoneg"); + + /* Perform some bounds checking on the hw->autoneg_advertised + * parameter. If this variable is zero, then set it to the default. + */ + hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + + /* If autoneg_advertised is zero, we assume it was not defaulted + * by the calling code so we set to advertise full capability. + */ + if(hw->autoneg_advertised == 0) + hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; + + DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); + ret_val = e1000_phy_setup_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error Setting up Auto-Negotiation\n"); + return ret_val; + } + DEBUGOUT("Restarting Auto-Neg\n"); + + /* Restart auto-negotiation by setting the Auto Neg Enable bit and + * the Auto Neg Restart bit in the PHY control register. + */ + ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); + if(ret_val) + return ret_val; + + phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); + ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); + if(ret_val) + return ret_val; + + /* Does the user want to wait for Auto-Neg to complete here, or + * check at a later time (for example, callback routine). + */ + if(hw->wait_autoneg_complete) { + ret_val = e1000_wait_autoneg(hw); + if(ret_val) { + DEBUGOUT("Error while waiting for autoneg to complete\n"); + return ret_val; } + } - /* Options: - * autoneg = 1 (default) - * PHY will advertise value(s) parsed from - * autoneg_advertised and fc - * autoneg = 0 - * PHY will be set to 10H, 10F, 100H, or 100F - * depending on value parsed from forced_speed_duplex. - */ + hw->get_link_status = TRUE; - /* Is autoneg enabled? This is enabled by default or by software - * override. If so, call e1000_phy_setup_autoneg routine to parse the - * autoneg_advertised and fc options. If autoneg is NOT enabled, then - * the user should have provided a speed/duplex override. If so, then - * call e1000_phy_force_speed_duplex to parse and set this up. - */ - if(hw->autoneg) { - /* Perform some bounds checking on the hw->autoneg_advertised - * parameter. If this variable is zero, then set it to the default. - */ - hw->autoneg_advertised &= AUTONEG_ADVERTISE_SPEED_DEFAULT; + return E1000_SUCCESS; +} - /* If autoneg_advertised is zero, we assume it was not defaulted - * by the calling code so we set to advertise full capability. - */ - if(hw->autoneg_advertised == 0) - hw->autoneg_advertised = AUTONEG_ADVERTISE_SPEED_DEFAULT; - DEBUGOUT("Reconfiguring auto-neg advertisement params\n"); - ret_val = e1000_phy_setup_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error Setting up Auto-Negotiation\n"); - return ret_val; - } - DEBUGOUT("Restarting Auto-Neg\n"); +/****************************************************************************** +* Config the MAC and the PHY after link is up. +* 1) Set up the MAC to the current PHY speed/duplex +* if we are on 82543. If we +* are on newer silicon, we only need to configure +* collision distance in the Transmit Control Register. +* 2) Set up flow control on the MAC to that established with +* the link partner. +* 3) Config DSP to improve Gigabit link quality for some PHY revisions. +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_copper_link_postconfig(struct e1000_hw *hw) +{ + int32_t ret_val; + DEBUGFUNC("e1000_copper_link_postconfig"); + + if(hw->mac_type >= e1000_82544) { + e1000_config_collision_dist(hw); + } else { + ret_val = e1000_config_mac_to_phy(hw); + if(ret_val) { + DEBUGOUT("Error configuring MAC to PHY settings\n"); + return ret_val; + } + } + ret_val = e1000_config_fc_after_link_up(hw); + if(ret_val) { + DEBUGOUT("Error Configuring Flow Control\n"); + return ret_val; + } - /* Restart auto-negotiation by setting the Auto Neg Enable bit and - * the Auto Neg Restart bit in the PHY control register. - */ - ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); - if(ret_val) - return ret_val; + /* Config DSP to improve Giga link quality */ + if(hw->phy_type == e1000_phy_igp) { + ret_val = e1000_config_dsp_after_link_change(hw, TRUE); + if(ret_val) { + DEBUGOUT("Error Configuring DSP after link up\n"); + return ret_val; + } + } + + return E1000_SUCCESS; +} - phy_data |= (MII_CR_AUTO_NEG_EN | MII_CR_RESTART_AUTO_NEG); - ret_val = e1000_write_phy_reg(hw, PHY_CTRL, phy_data); - if(ret_val) - return ret_val; +/****************************************************************************** +* Detects which PHY is present and setup the speed and duplex +* +* hw - Struct containing variables accessed by shared code +******************************************************************************/ +static int32_t +e1000_setup_copper_link(struct e1000_hw *hw) +{ + int32_t ret_val; + uint16_t i; + uint16_t phy_data; - /* Does the user want to wait for Auto-Neg to complete here, or - * check at a later time (for example, callback routine). - */ - if(hw->wait_autoneg_complete) { - ret_val = e1000_wait_autoneg(hw); - if(ret_val) { - DEBUGOUT("Error while waiting for autoneg to complete\n"); - return ret_val; - } - } - hw->get_link_status = TRUE; - } else { - DEBUGOUT("Forcing speed and duplex\n"); - ret_val = e1000_phy_force_speed_duplex(hw); - if(ret_val) { - DEBUGOUT("Error Forcing Speed and Duplex\n"); - return ret_val; - } + DEBUGFUNC("e1000_setup_copper_link"); + + /* Check if it is a valid PHY and set PHY mode if necessary. */ + ret_val = e1000_copper_link_preconfig(hw); + if(ret_val) + return ret_val; + + if (hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { + ret_val = e1000_copper_link_igp_setup(hw); + if(ret_val) + return ret_val; + } else if (hw->phy_type == e1000_phy_m88) { + ret_val = e1000_copper_link_mgp_setup(hw); + if(ret_val) + return ret_val; + } + + if(hw->autoneg) { + /* Setup autoneg and flow control advertisement + * and perform autonegotiation */ + ret_val = e1000_copper_link_autoneg(hw); + if(ret_val) + return ret_val; + } else { + /* PHY will be set to 10H, 10F, 100H,or 100F + * depending on value from forced_speed_duplex. */ + DEBUGOUT("Forcing speed and duplex\n"); + ret_val = e1000_phy_force_speed_duplex(hw); + if(ret_val) { + DEBUGOUT("Error Forcing Speed and Duplex\n"); + return ret_val; } - } /* !hw->phy_reset_disable */ + } /* Check link status. Wait up to 100 microseconds for link to become * valid. @@ -1242,37 +1452,11 @@ e1000_setup_copper_link(struct e1000_hw *hw) return ret_val; if(phy_data & MII_SR_LINK_STATUS) { - /* We have link, so we need to finish the config process: - * 1) Set up the MAC to the current PHY speed/duplex - * if we are on 82543. If we - * are on newer silicon, we only need to configure - * collision distance in the Transmit Control Register. - * 2) Set up flow control on the MAC to that established with - * the link partner. - */ - if(hw->mac_type >= e1000_82544) { - e1000_config_collision_dist(hw); - } else { - ret_val = e1000_config_mac_to_phy(hw); - if(ret_val) { - DEBUGOUT("Error configuring MAC to PHY settings\n"); - return ret_val; - } - } - ret_val = e1000_config_fc_after_link_up(hw); - if(ret_val) { - DEBUGOUT("Error Configuring Flow Control\n"); + /* Config the MAC and PHY after link is up */ + ret_val = e1000_copper_link_postconfig(hw); + if(ret_val) return ret_val; - } - DEBUGOUT("Valid link established!!!\n"); - - if(hw->phy_type == e1000_phy_igp) { - ret_val = e1000_config_dsp_after_link_change(hw, TRUE); - if(ret_val) { - DEBUGOUT("Error Configuring DSP after link up\n"); - return ret_val; - } - } + DEBUGOUT("Valid link established!!!\n"); return E1000_SUCCESS; } @@ -1302,10 +1486,10 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) if(ret_val) return ret_val; - /* Read the MII 1000Base-T Control Register (Address 9). */ - ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); - if(ret_val) - return ret_val; + /* Read the MII 1000Base-T Control Register (Address 9). */ + ret_val = e1000_read_phy_reg(hw, PHY_1000T_CTRL, &mii_1000t_ctrl_reg); + if(ret_val) + return ret_val; /* Need to parse both autoneg_advertised and fc and set up * the appropriate PHY registers. First we will parse for @@ -1417,7 +1601,7 @@ e1000_phy_setup_autoneg(struct e1000_hw *hw) DEBUGOUT1("Auto-Neg Advertising %x\n", mii_autoneg_adv_reg); - ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); + ret_val = e1000_write_phy_reg(hw, PHY_1000T_CTRL, mii_1000t_ctrl_reg); if(ret_val) return ret_val; @@ -1678,6 +1862,11 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) DEBUGFUNC("e1000_config_mac_to_phy"); + /* 82544 or newer MAC, Auto Speed Detection takes care of + * MAC speed/duplex configuration.*/ + if (hw->mac_type >= e1000_82544) + return E1000_SUCCESS; + /* Read the Device Control Register and set the bits to Force Speed * and Duplex. */ @@ -1688,45 +1877,25 @@ e1000_config_mac_to_phy(struct e1000_hw *hw) /* Set up duplex in the Device Control and Transmit Control * registers depending on negotiated values. */ - if (hw->phy_type == e1000_phy_igp) { - ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, - &phy_data); - if(ret_val) - return ret_val; - - if(phy_data & IGP01E1000_PSSR_FULL_DUPLEX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; - - e1000_config_collision_dist(hw); + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); + if(ret_val) + return ret_val; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_1000MBPS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & IGP01E1000_PSSR_SPEED_MASK) == - IGP01E1000_PSSR_SPEED_100MBPS) - ctrl |= E1000_CTRL_SPD_100; - } else { - ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, - &phy_data); - if(ret_val) - return ret_val; + if(phy_data & M88E1000_PSSR_DPLX) + ctrl |= E1000_CTRL_FD; + else + ctrl &= ~E1000_CTRL_FD; - if(phy_data & M88E1000_PSSR_DPLX) ctrl |= E1000_CTRL_FD; - else ctrl &= ~E1000_CTRL_FD; + e1000_config_collision_dist(hw); - e1000_config_collision_dist(hw); + /* Set up speed in the Device Control register depending on + * negotiated values. + */ + if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) + ctrl |= E1000_CTRL_SPD_1000; + else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) + ctrl |= E1000_CTRL_SPD_100; - /* Set up speed in the Device Control register depending on - * negotiated values. - */ - if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_1000MBS) - ctrl |= E1000_CTRL_SPD_1000; - else if((phy_data & M88E1000_PSSR_SPEED) == M88E1000_PSSR_100MBS) - ctrl |= E1000_CTRL_SPD_100; - } /* Write the configured values back to the Device Control Reg. */ E1000_WRITE_REG(hw, CTRL, ctrl); return E1000_SUCCESS; @@ -2494,8 +2663,8 @@ e1000_read_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_read_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2600,8 +2769,8 @@ e1000_write_phy_reg(struct e1000_hw *hw, DEBUGFUNC("e1000_write_phy_reg"); - - if(hw->phy_type == e1000_phy_igp && + if((hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) && (reg_addr > MAX_PHY_MULTI_PAGE_REG)) { ret_val = e1000_write_phy_reg_ex(hw, IGP01E1000_PHY_PAGE_SELECT, (uint16_t)reg_addr); @@ -2679,19 +2848,27 @@ e1000_write_phy_reg_ex(struct e1000_hw *hw, return E1000_SUCCESS; } + /****************************************************************************** * Returns the PHY to the power-on reset state * * hw - Struct containing variables accessed by shared code ******************************************************************************/ -void +int32_t e1000_phy_hw_reset(struct e1000_hw *hw) { uint32_t ctrl, ctrl_ext; uint32_t led_ctrl; + int32_t ret_val; DEBUGFUNC("e1000_phy_hw_reset"); + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + DEBUGOUT("Resetting Phy...\n"); if(hw->mac_type > e1000_82543) { @@ -2727,6 +2904,11 @@ e1000_phy_hw_reset(struct e1000_hw *hw) led_ctrl |= (IGP_ACTIVITY_LED_ENABLE | IGP_LED3_MODE); E1000_WRITE_REG(hw, LEDCTL, led_ctrl); } + + /* Wait for FW to finish PHY configuration. */ + ret_val = e1000_get_phy_cfg_done(hw); + + return ret_val; } /****************************************************************************** @@ -2744,7 +2926,19 @@ e1000_phy_reset(struct e1000_hw *hw) DEBUGFUNC("e1000_phy_reset"); - if(hw->mac_type != e1000_82541_rev_2) { + /* In the case of the phy reset being blocked, it's not an error, we + * simply return success without performing the reset. */ + ret_val = e1000_check_phy_reset_block(hw); + if (ret_val) + return E1000_SUCCESS; + + switch (hw->mac_type) { + case e1000_82541_rev_2: + ret_val = e1000_phy_hw_reset(hw); + if(ret_val) + return ret_val; + break; + default: ret_val = e1000_read_phy_reg(hw, PHY_CTRL, &phy_data); if(ret_val) return ret_val; @@ -2755,9 +2949,10 @@ e1000_phy_reset(struct e1000_hw *hw) return ret_val; udelay(1); - } else e1000_phy_hw_reset(hw); + break; + } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || hw->phy_type == e1000_phy_igp_2) e1000_phy_init_script(hw); return E1000_SUCCESS; @@ -2811,6 +3006,9 @@ e1000_detect_gig_phy(struct e1000_hw *hw) case e1000_82547_rev_2: if(hw->phy_id == IGP01E1000_I_PHY_ID) match = TRUE; break; + case e1000_82573: + if(hw->phy_id == M88E1111_I_PHY_ID) match = TRUE; + break; default: DEBUGOUT1("Invalid MAC type %d\n", hw->mac_type); return -E1000_ERR_CONFIG; @@ -2866,7 +3064,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; /* IGP01E1000 does not need to support it. */ phy_info->extended_10bt_distance = e1000_10bt_ext_dist_enable_normal; @@ -2905,7 +3103,7 @@ e1000_phy_igp_get_info(struct e1000_hw *hw, if(ret_val) return ret_val; - /* transalte to old method */ + /* Translate to old method */ average = (max_length + min_length) / 2; if(average <= e1000_igp_cable_length_50) @@ -2940,7 +3138,7 @@ e1000_phy_m88_get_info(struct e1000_hw *hw, /* The downshift status is checked only once, after link is established, * and it stored in the hw->speed_downgraded parameter. */ - phy_info->downshift = hw->speed_downgraded; + phy_info->downshift = (e1000_downshift)hw->speed_downgraded; ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_CTRL, &phy_data); if(ret_val) @@ -3029,7 +3227,8 @@ e1000_phy_get_info(struct e1000_hw *hw, return -E1000_ERR_CONFIG; } - if(hw->phy_type == e1000_phy_igp) + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) return e1000_phy_igp_get_info(hw, phy_info); else return e1000_phy_m88_get_info(hw, phy_info); @@ -3055,11 +3254,12 @@ e1000_validate_mdi_setting(struct e1000_hw *hw) * * hw - Struct containing variables accessed by shared code *****************************************************************************/ -void +int32_t e1000_init_eeprom_params(struct e1000_hw *hw) { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t eecd = E1000_READ_REG(hw, EECD); + int32_t ret_val = E1000_SUCCESS; uint16_t eeprom_size; DEBUGFUNC("e1000_init_eeprom_params"); @@ -3074,6 +3274,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->opcode_bits = 3; eeprom->address_bits = 6; eeprom->delay_usec = 50; + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82540: case e1000_82545: @@ -3090,6 +3292,8 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->word_size = 64; eeprom->address_bits = 6; } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; break; case e1000_82541: case e1000_82541_rev_2: @@ -3118,42 +3322,60 @@ e1000_init_eeprom_params(struct e1000_hw *hw) eeprom->address_bits = 6; } } + eeprom->use_eerd = FALSE; + eeprom->use_eewr = FALSE; + break; + case e1000_82573: + eeprom->type = e1000_eeprom_spi; + eeprom->opcode_bits = 8; + eeprom->delay_usec = 1; + if (eecd & E1000_EECD_ADDR_BITS) { + eeprom->page_size = 32; + eeprom->address_bits = 16; + } else { + eeprom->page_size = 8; + eeprom->address_bits = 8; + } + eeprom->use_eerd = TRUE; + eeprom->use_eewr = TRUE; + if(e1000_is_onboard_nvm_eeprom(hw) == FALSE) { + eeprom->type = e1000_eeprom_flash; + eeprom->word_size = 2048; + + /* Ensure that the Autonomous FLASH update bit is cleared due to + * Flash update issue on parts which use a FLASH for NVM. */ + eecd &= ~E1000_EECD_AUPDEN; + E1000_WRITE_REG(hw, EECD, eecd); + } break; default: break; } if (eeprom->type == e1000_eeprom_spi) { - eeprom->word_size = 64; - if (e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size) == 0) { - eeprom_size &= EEPROM_SIZE_MASK; - - switch (eeprom_size) { - case EEPROM_SIZE_16KB: - eeprom->word_size = 8192; - break; - case EEPROM_SIZE_8KB: - eeprom->word_size = 4096; - break; - case EEPROM_SIZE_4KB: - eeprom->word_size = 2048; - break; - case EEPROM_SIZE_2KB: - eeprom->word_size = 1024; - break; - case EEPROM_SIZE_1KB: - eeprom->word_size = 512; - break; - case EEPROM_SIZE_512B: - eeprom->word_size = 256; - break; - case EEPROM_SIZE_128B: - default: - eeprom->word_size = 64; - break; - } + /* eeprom_size will be an enum [0..8] that maps to eeprom sizes 128B to + * 32KB (incremented by powers of 2). + */ + if(hw->mac_type <= e1000_82547_rev_2) { + /* Set to default value for initial eeprom read. */ + eeprom->word_size = 64; + ret_val = e1000_read_eeprom(hw, EEPROM_CFG, 1, &eeprom_size); + if(ret_val) + return ret_val; + eeprom_size = (eeprom_size & EEPROM_SIZE_MASK) >> EEPROM_SIZE_SHIFT; + /* 256B eeprom size was not supported in earlier hardware, so we + * bump eeprom_size up one to ensure that "1" (which maps to 256B) + * is never the result used in the shifting logic below. */ + if(eeprom_size) + eeprom_size++; + } else { + eeprom_size = (uint16_t)((eecd & E1000_EECD_SIZE_EX_MASK) >> + E1000_EECD_SIZE_EX_SHIFT); } + + eeprom->word_size = 1 << (eeprom_size + EEPROM_WORD_SIZE_SHIFT); } + return ret_val; } /****************************************************************************** @@ -3306,8 +3528,12 @@ e1000_acquire_eeprom(struct e1000_hw *hw) DEBUGFUNC("e1000_acquire_eeprom"); + if(e1000_get_hw_eeprom_semaphore(hw)) + return -E1000_ERR_EEPROM; + eecd = E1000_READ_REG(hw, EECD); + if (hw->mac_type != e1000_82573) { /* Request EEPROM Access */ if(hw->mac_type > e1000_82544) { eecd |= E1000_EECD_REQ; @@ -3326,6 +3552,7 @@ e1000_acquire_eeprom(struct e1000_hw *hw) return -E1000_ERR_EEPROM; } } + } /* Setup EEPROM for Read/Write */ @@ -3443,6 +3670,8 @@ e1000_release_eeprom(struct e1000_hw *hw) eecd &= ~E1000_EECD_REQ; E1000_WRITE_REG(hw, EECD, eecd); } + + e1000_put_hw_eeprom_semaphore(hw); } /****************************************************************************** @@ -3504,8 +3733,10 @@ e1000_read_eeprom(struct e1000_hw *hw, { struct e1000_eeprom_info *eeprom = &hw->eeprom; uint32_t i = 0; + int32_t ret_val; DEBUGFUNC("e1000_read_eeprom"); + /* A check for invalid values: offset too large, too many words, and not * enough words. */ @@ -3515,9 +3746,23 @@ e1000_read_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } - /* Prepare the EEPROM for reading */ - if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) - return -E1000_ERR_EEPROM; + /* FLASH reads without acquiring the semaphore are safe in 82573-based + * controllers. + */ + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) { + /* Prepare the EEPROM for reading */ + if(e1000_acquire_eeprom(hw) != E1000_SUCCESS) + return -E1000_ERR_EEPROM; + } + + if(eeprom->use_eerd == TRUE) { + ret_val = e1000_read_eeprom_eerd(hw, offset, words, data); + if ((e1000_is_onboard_nvm_eeprom(hw) == TRUE) || + (hw->mac_type != e1000_82573)) + e1000_release_eeprom(hw); + return ret_val; + } if(eeprom->type == e1000_eeprom_spi) { uint16_t word_in; @@ -3569,6 +3814,132 @@ e1000_read_eeprom(struct e1000_hw *hw, } /****************************************************************************** + * Reads a 16 bit word from the EEPROM using the EERD register. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_read_eeprom_eerd(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) +{ + uint32_t i, eerd = 0; + int32_t error = 0; + + for (i = 0; i < words; i++) { + eerd = ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) + + E1000_EEPROM_RW_REG_START; + + E1000_WRITE_REG(hw, EERD, eerd); + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_READ); + + if(error) { + break; + } + data[i] = (E1000_READ_REG(hw, EERD) >> E1000_EEPROM_RW_REG_DATA); + + } + + return error; +} + +/****************************************************************************** + * Writes a 16 bit word from the EEPROM using the EEWR register. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_write_eeprom_eewr(struct e1000_hw *hw, + uint16_t offset, + uint16_t words, + uint16_t *data) +{ + uint32_t register_value = 0; + uint32_t i = 0; + int32_t error = 0; + + for (i = 0; i < words; i++) { + register_value = (data[i] << E1000_EEPROM_RW_REG_DATA) | + ((offset+i) << E1000_EEPROM_RW_ADDR_SHIFT) | + E1000_EEPROM_RW_REG_START; + + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + if(error) { + break; + } + + E1000_WRITE_REG(hw, EEWR, register_value); + + error = e1000_poll_eerd_eewr_done(hw, E1000_EEPROM_POLL_WRITE); + + if(error) { + break; + } + } + + return error; +} + +/****************************************************************************** + * Polls the status bit (bit 1) of the EERD to determine when the read is done. + * + * hw - Struct containing variables accessed by shared code + *****************************************************************************/ +int32_t +e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd) +{ + uint32_t attempts = 100000; + uint32_t i, reg = 0; + int32_t done = E1000_ERR_EEPROM; + + for(i = 0; i < attempts; i++) { + if(eerd == E1000_EEPROM_POLL_READ) + reg = E1000_READ_REG(hw, EERD); + else + reg = E1000_READ_REG(hw, EEWR); + + if(reg & E1000_EEPROM_RW_REG_DONE) { + done = E1000_SUCCESS; + break; + } + udelay(5); + } + + return done; +} + +/*************************************************************************** +* Description: Determines if the onboard NVM is FLASH or EEPROM. +* +* hw - Struct containing variables accessed by shared code +****************************************************************************/ +boolean_t +e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw) +{ + uint32_t eecd = 0; + + if(hw->mac_type == e1000_82573) { + eecd = E1000_READ_REG(hw, EECD); + + /* Isolate bits 15 & 16 */ + eecd = ((eecd >> 15) & 0x03); + + /* If both bits are set, device is Flash type */ + if(eecd == 0x03) { + return FALSE; + } + } + return TRUE; +} + +/****************************************************************************** * Verifies that the EEPROM has a valid checksum * * hw - Struct containing variables accessed by shared code @@ -3585,6 +3956,25 @@ e1000_validate_eeprom_checksum(struct e1000_hw *hw) DEBUGFUNC("e1000_validate_eeprom_checksum"); + if ((hw->mac_type == e1000_82573) && + (e1000_is_onboard_nvm_eeprom(hw) == FALSE)) { + /* Check bit 4 of word 10h. If it is 0, firmware is done updating + * 10h-12h. Checksum may need to be fixed. */ + e1000_read_eeprom(hw, 0x10, 1, &eeprom_data); + if ((eeprom_data & 0x10) == 0) { + /* Read 0x23 and check bit 15. This bit is a 1 when the checksum + * has already been fixed. If the checksum is still wrong and this + * bit is a 1, we need to return bad checksum. Otherwise, we need + * to set this bit to a 1 and update the checksum. */ + e1000_read_eeprom(hw, 0x23, 1, &eeprom_data); + if ((eeprom_data & 0x8000) == 0) { + eeprom_data |= 0x8000; + e1000_write_eeprom(hw, 0x23, 1, &eeprom_data); + e1000_update_eeprom_checksum(hw); + } + } + } + for(i = 0; i < (EEPROM_CHECKSUM_REG + 1); i++) { if(e1000_read_eeprom(hw, i, 1, &eeprom_data) < 0) { DEBUGOUT("EEPROM Read Error\n"); @@ -3628,6 +4018,8 @@ e1000_update_eeprom_checksum(struct e1000_hw *hw) if(e1000_write_eeprom(hw, EEPROM_CHECKSUM_REG, 1, &checksum) < 0) { DEBUGOUT("EEPROM Write Error\n"); return -E1000_ERR_EEPROM; + } else if (hw->eeprom.type == e1000_eeprom_flash) { + e1000_commit_shadow_ram(hw); } return E1000_SUCCESS; } @@ -3663,6 +4055,10 @@ e1000_write_eeprom(struct e1000_hw *hw, return -E1000_ERR_EEPROM; } + /* 82573 reads only through eerd */ + if(eeprom->use_eewr == TRUE) + return e1000_write_eeprom_eewr(hw, offset, words, data); + /* Prepare the EEPROM for writing */ if (e1000_acquire_eeprom(hw) != E1000_SUCCESS) return -E1000_ERR_EEPROM; @@ -3833,6 +4229,65 @@ e1000_write_eeprom_microwire(struct e1000_hw *hw, } /****************************************************************************** + * Flushes the cached eeprom to NVM. This is done by saving the modified values + * in the eeprom cache and the non modified values in the currently active bank + * to the new bank. + * + * hw - Struct containing variables accessed by shared code + * offset - offset of word in the EEPROM to read + * data - word read from the EEPROM + * words - number of words to read + *****************************************************************************/ +int32_t +e1000_commit_shadow_ram(struct e1000_hw *hw) +{ + uint32_t attempts = 100000; + uint32_t eecd = 0; + uint32_t flop = 0; + uint32_t i = 0; + int32_t error = E1000_SUCCESS; + + /* The flop register will be used to determine if flash type is STM */ + flop = E1000_READ_REG(hw, FLOP); + + if (hw->mac_type == e1000_82573) { + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + + /* If STM opcode located in bits 15:8 of flop, reset firmware */ + if ((flop & 0xFF00) == E1000_STM_OPCODE) { + E1000_WRITE_REG(hw, HICR, E1000_HICR_FW_RESET); + } + + /* Perform the flash update */ + E1000_WRITE_REG(hw, EECD, eecd | E1000_EECD_FLUPD); + + for (i=0; i < attempts; i++) { + eecd = E1000_READ_REG(hw, EECD); + if ((eecd & E1000_EECD_FLUPD) == 0) { + break; + } + udelay(5); + } + + if (i == attempts) { + return -E1000_ERR_EEPROM; + } + } + + return error; +} + +/****************************************************************************** * Reads the adapter's part number from the EEPROM * * hw - Struct containing variables accessed by shared code @@ -3911,6 +4366,7 @@ void e1000_init_rx_addrs(struct e1000_hw *hw) { uint32_t i; + uint32_t rar_num; DEBUGFUNC("e1000_init_rx_addrs"); @@ -3919,9 +4375,10 @@ e1000_init_rx_addrs(struct e1000_hw *hw) e1000_rar_set(hw, hw->mac_addr, 0); + rar_num = E1000_RAR_ENTRIES; /* Zero out the other 15 receive addresses. */ DEBUGOUT("Clearing RAR[1-15]\n"); - for(i = 1; i < E1000_RAR_ENTRIES; i++) { + for(i = 1; i < rar_num; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } @@ -3950,7 +4407,9 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, { uint32_t hash_value; uint32_t i; - + uint32_t num_rar_entry; + uint32_t num_mta_entry; + DEBUGFUNC("e1000_mc_addr_list_update"); /* Set the new number of MC addresses that we are being requested to use. */ @@ -3958,14 +4417,16 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Clear RAR[1-15] */ DEBUGOUT(" Clearing RAR[1-15]\n"); - for(i = rar_used_count; i < E1000_RAR_ENTRIES; i++) { + num_rar_entry = E1000_RAR_ENTRIES; + for(i = rar_used_count; i < num_rar_entry; i++) { E1000_WRITE_REG_ARRAY(hw, RA, (i << 1), 0); E1000_WRITE_REG_ARRAY(hw, RA, ((i << 1) + 1), 0); } /* Clear the MTA */ DEBUGOUT(" Clearing MTA\n"); - for(i = 0; i < E1000_NUM_MTA_REGISTERS; i++) { + num_mta_entry = E1000_NUM_MTA_REGISTERS; + for(i = 0; i < num_mta_entry; i++) { E1000_WRITE_REG_ARRAY(hw, MTA, i, 0); } @@ -3989,7 +4450,7 @@ e1000_mc_addr_list_update(struct e1000_hw *hw, /* Place this multicast address in the RAR if there is room, * * else put it in the MTA */ - if(rar_used_count < E1000_RAR_ENTRIES) { + if (rar_used_count < num_rar_entry) { e1000_rar_set(hw, mc_addr_list + (i * (ETH_LENGTH_OF_ADDRESS + pad)), rar_used_count); @@ -4040,6 +4501,7 @@ e1000_hash_mc_addr(struct e1000_hw *hw, } hash_value &= 0xFFF; + return hash_value; } @@ -4144,12 +4606,33 @@ void e1000_clear_vfta(struct e1000_hw *hw) { uint32_t offset; - - for(offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) - E1000_WRITE_REG_ARRAY(hw, VFTA, offset, 0); + uint32_t vfta_value = 0; + uint32_t vfta_offset = 0; + uint32_t vfta_bit_in_reg = 0; + + if (hw->mac_type == e1000_82573) { + if (hw->mng_cookie.vlan_id != 0) { + /* The VFTA is a 4096b bit-field, each identifying a single VLAN + * ID. The following operations determine which 32b entry + * (i.e. offset) into the array we want to set the VLAN ID + * (i.e. bit) of the manageability unit. */ + vfta_offset = (hw->mng_cookie.vlan_id >> + E1000_VFTA_ENTRY_SHIFT) & + E1000_VFTA_ENTRY_MASK; + vfta_bit_in_reg = 1 << (hw->mng_cookie.vlan_id & + E1000_VFTA_ENTRY_BIT_SHIFT_MASK); + } + } + for (offset = 0; offset < E1000_VLAN_FILTER_TBL_SIZE; offset++) { + /* If the offset we want to clear is the same offset of the + * manageability VLAN ID, then clear all bits except that of the + * manageability unit */ + vfta_value = (offset == vfta_offset) ? vfta_bit_in_reg : 0; + E1000_WRITE_REG_ARRAY(hw, VFTA, offset, vfta_value); + } } -static int32_t +int32_t e1000_id_led_init(struct e1000_hw * hw) { uint32_t ledctl; @@ -4480,6 +4963,19 @@ e1000_clear_hw_cntrs(struct e1000_hw *hw) temp = E1000_READ_REG(hw, MGTPRC); temp = E1000_READ_REG(hw, MGTPDC); temp = E1000_READ_REG(hw, MGTPTC); + + if(hw->mac_type <= e1000_82547_rev_2) return; + + temp = E1000_READ_REG(hw, IAC); + temp = E1000_READ_REG(hw, ICRXOC); + temp = E1000_READ_REG(hw, ICRXPTC); + temp = E1000_READ_REG(hw, ICRXATC); + temp = E1000_READ_REG(hw, ICTXPTC); + temp = E1000_READ_REG(hw, ICTXATC); + temp = E1000_READ_REG(hw, ICTXQEC); + temp = E1000_READ_REG(hw, ICTXQMTC); + temp = E1000_READ_REG(hw, ICRXDMTC); + } /****************************************************************************** @@ -4646,6 +5142,11 @@ e1000_get_bus_info(struct e1000_hw *hw) hw->bus_speed = e1000_bus_speed_unknown; hw->bus_width = e1000_bus_width_unknown; break; + case e1000_82573: + hw->bus_type = e1000_bus_type_pci_express; + hw->bus_speed = e1000_bus_speed_2500; + hw->bus_width = e1000_bus_width_pciex_4; + break; default: status = E1000_READ_REG(hw, STATUS); hw->bus_type = (status & E1000_STATUS_PCIX_MODE) ? @@ -4749,6 +5250,7 @@ e1000_get_cable_length(struct e1000_hw *hw, /* Use old method for Phy older than IGP */ if(hw->phy_type == e1000_phy_m88) { + ret_val = e1000_read_phy_reg(hw, M88E1000_PHY_SPEC_STATUS, &phy_data); if(ret_val) @@ -4865,7 +5367,8 @@ e1000_check_polarity(struct e1000_hw *hw, return ret_val; *polarity = (phy_data & M88E1000_PSSR_REV_POLARITY) >> M88E1000_PSSR_REV_POLARITY_SHIFT; - } else if(hw->phy_type == e1000_phy_igp) { + } else if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { /* Read the Status register to check the speed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_STATUS, &phy_data); @@ -4917,7 +5420,8 @@ e1000_check_downshift(struct e1000_hw *hw) DEBUGFUNC("e1000_check_downshift"); - if(hw->phy_type == e1000_phy_igp) { + if(hw->phy_type == e1000_phy_igp || + hw->phy_type == e1000_phy_igp_2) { ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_LINK_HEALTH, &phy_data); if(ret_val) @@ -4933,6 +5437,7 @@ e1000_check_downshift(struct e1000_hw *hw) hw->speed_downgraded = (phy_data & M88E1000_PSSR_DOWNSHIFT) >> M88E1000_PSSR_DOWNSHIFT_SHIFT; } + return E1000_SUCCESS; } @@ -5047,7 +5552,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5071,7 +5576,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5096,7 +5601,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); ret_val = e1000_write_phy_reg(hw, 0x0000, IGP01E1000_IEEE_FORCE_GIGA); @@ -5112,7 +5617,7 @@ e1000_config_dsp_after_link_change(struct e1000_hw *hw, if(ret_val) return ret_val; - msec_delay(20); + msec_delay_irq(20); /* Now enable the transmitter */ ret_val = e1000_write_phy_reg(hw, 0x2F5B, phy_saved_data); @@ -5187,22 +5692,36 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, uint16_t phy_data; DEBUGFUNC("e1000_set_d3_lplu_state"); - if(!((hw->mac_type == e1000_82541_rev_2) || - (hw->mac_type == e1000_82547_rev_2))) + if(hw->phy_type != e1000_phy_igp && hw->phy_type != e1000_phy_igp_2) return E1000_SUCCESS; /* During driver activity LPLU should not be used or it will attain link * from the lowest speeds starting from 10Mbps. The capability is used for * Dx transitions and states */ - ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); - if(ret_val) - return ret_val; - - if(!active) { - phy_data &= ~IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || hw->mac_type == e1000_82547_rev_2) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_GMII_FIFO, &phy_data); if(ret_val) return ret_val; + } else { + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); + if(ret_val) + return ret_val; + } + + if(!active) { + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data &= ~IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data &= ~IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during * Dx states where the power conservation is most important. During @@ -5236,11 +5755,105 @@ e1000_set_d3_lplu_state(struct e1000_hw *hw, (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_ALL ) || (hw->autoneg_advertised == AUTONEG_ADVERTISE_10_100_ALL)) { - phy_data |= IGP01E1000_GMII_FLEX_SPD; - ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(hw->mac_type == e1000_82541_rev_2 || + hw->mac_type == e1000_82547_rev_2) { + phy_data |= IGP01E1000_GMII_FLEX_SPD; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_GMII_FIFO, phy_data); + if(ret_val) + return ret_val; + } else { + phy_data |= IGP02E1000_PM_D3_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, + phy_data); + if (ret_val) + return ret_val; + } + + /* When LPLU is enabled we should disable SmartSpeed */ + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); + if(ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, phy_data); if(ret_val) return ret_val; + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * + * This function sets the lplu d0 state according to the active flag. When + * activating lplu this function also disables smart speed and vise versa. + * lplu will not be activated unless the device autonegotiation advertisment + * meets standards of either 10 or 10/100 or 10/100/1000 at all duplexes. + * hw: Struct containing variables accessed by shared code + * active - true to enable lplu false to disable lplu. + * + * returns: - E1000_ERR_PHY if fail to read/write the PHY + * E1000_SUCCESS at any other case. + * + ****************************************************************************/ + +int32_t +e1000_set_d0_lplu_state(struct e1000_hw *hw, + boolean_t active) +{ + int32_t ret_val; + uint16_t phy_data; + DEBUGFUNC("e1000_set_d0_lplu_state"); + + if(hw->mac_type <= e1000_82547_rev_2) + return E1000_SUCCESS; + + ret_val = e1000_read_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, &phy_data); + if(ret_val) + return ret_val; + + if (!active) { + phy_data &= ~IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + + /* LPLU and SmartSpeed are mutually exclusive. LPLU is used during + * Dx states where the power conservation is most important. During + * driver activity we should enable SmartSpeed, so performance is + * maintained. */ + if (hw->smart_speed == e1000_smart_speed_on) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if(ret_val) + return ret_val; + + phy_data |= IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } else if (hw->smart_speed == e1000_smart_speed_off) { + ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + &phy_data); + if (ret_val) + return ret_val; + + phy_data &= ~IGP01E1000_PSCFR_SMART_SPEED; + ret_val = e1000_write_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, + phy_data); + if(ret_val) + return ret_val; + } + + + } else { + + phy_data |= IGP02E1000_PM_D0_LPLU; + ret_val = e1000_write_phy_reg(hw, IGP02E1000_PHY_POWER_MGMT, phy_data); + if (ret_val) + return ret_val; + /* When LPLU is enabled we should disable SmartSpeed */ ret_val = e1000_read_phy_reg(hw, IGP01E1000_PHY_PORT_CONFIG, &phy_data); if(ret_val) @@ -5318,6 +5931,338 @@ e1000_set_vco_speed(struct e1000_hw *hw) return E1000_SUCCESS; } + +/***************************************************************************** + * This function reads the cookie from ARC ram. + * + * returns: - E1000_SUCCESS . + ****************************************************************************/ +int32_t +e1000_host_if_read_cookie(struct e1000_hw * hw, uint8_t *buffer) +{ + uint8_t i; + uint32_t offset = E1000_MNG_DHCP_COOKIE_OFFSET; + uint8_t length = E1000_MNG_DHCP_COOKIE_LENGTH; + + length = (length >> 2); + offset = (offset >> 2); + + for (i = 0; i < length; i++) { + *((uint32_t *) buffer + i) = + E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset + i); + } + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks whether the HOST IF is enabled for command operaton + * and also checks whether the previous command is completed. + * It busy waits in case of previous command is not completed. + * + * returns: - E1000_ERR_HOST_INTERFACE_COMMAND in case if is not ready or + * timeout + * - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_enable_host_if(struct e1000_hw * hw) +{ + uint32_t hicr; + uint8_t i; + + /* Check that the host interface is enabled. */ + hicr = E1000_READ_REG(hw, HICR); + if ((hicr & E1000_HICR_EN) == 0) { + DEBUGOUT("E1000_HOST_EN bit disabled.\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + /* check the previous command is completed */ + for (i = 0; i < E1000_MNG_DHCP_COMMAND_TIMEOUT; i++) { + hicr = E1000_READ_REG(hw, HICR); + if (!(hicr & E1000_HICR_C)) + break; + msec_delay_irq(1); + } + + if (i == E1000_MNG_DHCP_COMMAND_TIMEOUT) { + DEBUGOUT("Previous command timeout failed .\n"); + return -E1000_ERR_HOST_INTERFACE_COMMAND; + } + return E1000_SUCCESS; +} + +/***************************************************************************** + * This function writes the buffer content at the offset given on the host if. + * It also does alignment considerations to do the writes in most efficient way. + * Also fills up the sum of the buffer in *buffer parameter. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_host_if_write(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum) +{ + uint8_t *tmp; + uint8_t *bufptr = buffer; + uint32_t data; + uint16_t remaining, i, j, prev_bytes; + + /* sum = only sum of the data and it is not checksum */ + + if (length == 0 || offset + length > E1000_HI_MAX_MNG_DATA_LENGTH) { + return -E1000_ERR_PARAM; + } + + tmp = (uint8_t *)&data; + prev_bytes = offset & 0x3; + offset &= 0xFFFC; + offset >>= 2; + + if (prev_bytes) { + data = E1000_READ_REG_ARRAY_DWORD(hw, HOST_IF, offset); + for (j = prev_bytes; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset, data); + length -= j - prev_bytes; + offset++; + } + + remaining = length & 0x3; + length -= remaining; + + /* Calculate length in DWORDs */ + length >>= 2; + + /* The device driver writes the relevant command block into the + * ram area. */ + for (i = 0; i < length; i++) { + for (j = 0; j < sizeof(uint32_t); j++) { + *(tmp + j) = *bufptr++; + *sum += *(tmp + j); + } + + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + if (remaining) { + for (j = 0; j < sizeof(uint32_t); j++) { + if (j < remaining) + *(tmp + j) = *bufptr++; + else + *(tmp + j) = 0; + + *sum += *(tmp + j); + } + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, offset + i, data); + } + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function writes the command header after does the checksum calculation. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_cmd_header(struct e1000_hw * hw, + struct e1000_host_mng_command_header * hdr) +{ + uint16_t i; + uint8_t sum; + uint8_t *buffer; + + /* Write the whole command header structure which includes sum of + * the buffer */ + + uint16_t length = sizeof(struct e1000_host_mng_command_header); + + sum = hdr->checksum; + hdr->checksum = 0; + + buffer = (uint8_t *) hdr; + i = length; + while(i--) + sum += buffer[i]; + + hdr->checksum = 0 - sum; + + length >>= 2; + /* The device driver writes the relevant command block into the ram area. */ + for (i = 0; i < length; i++) + E1000_WRITE_REG_ARRAY_DWORD(hw, HOST_IF, i, *((uint32_t *) hdr + i)); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function indicates to ARC that a new command is pending which completes + * one write operation by the driver. + * + * returns - E1000_SUCCESS for success. + ****************************************************************************/ +int32_t +e1000_mng_write_commit( + struct e1000_hw * hw) +{ + uint32_t hicr; + + hicr = E1000_READ_REG(hw, HICR); + /* Setting this bit tells the ARC that a new command is pending. */ + E1000_WRITE_REG(hw, HICR, hicr | E1000_HICR_C); + + return E1000_SUCCESS; +} + + +/***************************************************************************** + * This function checks the mode of the firmware. + * + * returns - TRUE when the mode is IAMT or FALSE. + ****************************************************************************/ +boolean_t +e1000_check_mng_mode( + struct e1000_hw *hw) +{ + uint32_t fwsm; + + fwsm = E1000_READ_REG(hw, FWSM); + + if((fwsm & E1000_FWSM_MODE_MASK) == + (E1000_MNG_IAMT_MODE << E1000_FWSM_MODE_SHIFT)) + return TRUE; + + return FALSE; +} + + +/***************************************************************************** + * This function writes the dhcp info . + ****************************************************************************/ +int32_t +e1000_mng_write_dhcp_info(struct e1000_hw * hw, uint8_t *buffer, + uint16_t length) +{ + int32_t ret_val; + struct e1000_host_mng_command_header hdr; + + hdr.command_id = E1000_MNG_DHCP_TX_PAYLOAD_CMD; + hdr.command_length = length; + hdr.reserved1 = 0; + hdr.reserved2 = 0; + hdr.checksum = 0; + + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_host_if_write(hw, buffer, length, sizeof(hdr), + &(hdr.checksum)); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_mng_write_cmd_header(hw, &hdr); + if (ret_val == E1000_SUCCESS) + ret_val = e1000_mng_write_commit(hw); + } + } + return ret_val; +} + + +/***************************************************************************** + * This function calculates the checksum. + * + * returns - checksum of buffer contents. + ****************************************************************************/ +uint8_t +e1000_calculate_mng_checksum(char *buffer, uint32_t length) +{ + uint8_t sum = 0; + uint32_t i; + + if (!buffer) + return 0; + + for (i=0; i < length; i++) + sum += buffer[i]; + + return (uint8_t) (0 - sum); +} + +/***************************************************************************** + * This function checks whether tx pkt filtering needs to be enabled or not. + * + * returns - TRUE for packet filtering or FALSE. + ****************************************************************************/ +boolean_t +e1000_enable_tx_pkt_filtering(struct e1000_hw *hw) +{ + /* called in init as well as watchdog timer functions */ + + int32_t ret_val, checksum; + boolean_t tx_filter = FALSE; + struct e1000_host_mng_dhcp_cookie *hdr = &(hw->mng_cookie); + uint8_t *buffer = (uint8_t *) &(hw->mng_cookie); + + if (e1000_check_mng_mode(hw)) { + ret_val = e1000_mng_enable_host_if(hw); + if (ret_val == E1000_SUCCESS) { + ret_val = e1000_host_if_read_cookie(hw, buffer); + if (ret_val == E1000_SUCCESS) { + checksum = hdr->checksum; + hdr->checksum = 0; + if ((hdr->signature == E1000_IAMT_SIGNATURE) && + checksum == e1000_calculate_mng_checksum((char *)buffer, + E1000_MNG_DHCP_COOKIE_LENGTH)) { + if (hdr->status & + E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT) + tx_filter = TRUE; + } else + tx_filter = TRUE; + } else + tx_filter = TRUE; + } + } + + hw->tx_pkt_filtering = tx_filter; + return tx_filter; +} + +/****************************************************************************** + * Verifies the hardware needs to allow ARPs to be processed by the host + * + * hw - Struct containing variables accessed by shared code + * + * returns: - TRUE/FALSE + * + *****************************************************************************/ +uint32_t +e1000_enable_mng_pass_thru(struct e1000_hw *hw) +{ + uint32_t manc; + uint32_t fwsm, factps; + + if (hw->asf_firmware_present) { + manc = E1000_READ_REG(hw, MANC); + + if (!(manc & E1000_MANC_RCV_TCO_EN) || + !(manc & E1000_MANC_EN_MAC_ADDR_FILTER)) + return FALSE; + if (e1000_arc_subsystem_valid(hw) == TRUE) { + fwsm = E1000_READ_REG(hw, FWSM); + factps = E1000_READ_REG(hw, FACTPS); + + if (((fwsm & E1000_FWSM_MODE_MASK) == + (e1000_mng_mode_pt << E1000_FWSM_MODE_SHIFT)) && + (factps & E1000_FACTPS_MNGCG)) + return TRUE; + } else + if ((manc & E1000_MANC_SMBUS_EN) && !(manc & E1000_MANC_ASF_EN)) + return TRUE; + } + return FALSE; +} + static int32_t e1000_polarity_reversal_workaround(struct e1000_hw *hw) { @@ -5403,3 +6348,265 @@ e1000_polarity_reversal_workaround(struct e1000_hw *hw) return E1000_SUCCESS; } +/*************************************************************************** + * + * Disables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_set_pci_express_master_disable(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_set_pci_express_master_disable"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl |= E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/*************************************************************************** + * + * Enables PCI-Express master access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - none. + * + ***************************************************************************/ +void +e1000_enable_pciex_master(struct e1000_hw *hw) +{ + uint32_t ctrl; + + DEBUGFUNC("e1000_enable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return; + + ctrl = E1000_READ_REG(hw, CTRL); + ctrl &= ~E1000_CTRL_GIO_MASTER_DISABLE; + E1000_WRITE_REG(hw, CTRL, ctrl); +} + +/******************************************************************************* + * + * Disables PCI-Express master access and verifies there are no pending requests + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_MASTER_REQUESTS_PENDING if master disable bit hasn't + * caused the master requests to be disabled. + * E1000_SUCCESS master requests disabled. + * + ******************************************************************************/ +int32_t +e1000_disable_pciex_master(struct e1000_hw *hw) +{ + int32_t timeout = MASTER_DISABLE_TIMEOUT; /* 80ms */ + + DEBUGFUNC("e1000_disable_pciex_master"); + + if (hw->bus_type != e1000_bus_type_pci_express) + return E1000_SUCCESS; + + e1000_set_pci_express_master_disable(hw); + + while(timeout) { + if(!(E1000_READ_REG(hw, STATUS) & E1000_STATUS_GIO_MASTER_ENABLE)) + break; + else + udelay(100); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Master requests are pending.\n"); + return -E1000_ERR_MASTER_REQUESTS_PENDING; + } + + return E1000_SUCCESS; +} + +/******************************************************************************* + * + * Check for EEPROM Auto Read bit done. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ******************************************************************************/ +int32_t +e1000_get_auto_rd_done(struct e1000_hw *hw) +{ + int32_t timeout = AUTO_READ_DONE_TIMEOUT; + + DEBUGFUNC("e1000_get_auto_rd_done"); + + switch (hw->mac_type) { + default: + msec_delay(5); + break; + case e1000_82573: + while(timeout) { + if (E1000_READ_REG(hw, EECD) & E1000_EECD_AUTO_RD) break; + else msec_delay(1); + timeout--; + } + + if(!timeout) { + DEBUGOUT("Auto read by HW from EEPROM has not completed.\n"); + return -E1000_ERR_RESET; + } + break; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * Checks if the PHY configuration is done + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_RESET if fail to reset MAC + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_phy_cfg_done(struct e1000_hw *hw) +{ + DEBUGFUNC("e1000_get_phy_cfg_done"); + + /* Simply wait for 10ms */ + msec_delay(10); + + return E1000_SUCCESS; +} + +/*************************************************************************** + * + * Using the combination of SMBI and SWESMBI semaphore bits when resetting + * adapter or Eeprom access. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - E1000_ERR_EEPROM if fail to access EEPROM. + * E1000_SUCCESS at any other case. + * + ***************************************************************************/ +int32_t +e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + int32_t timeout; + uint32_t swsm; + + DEBUGFUNC("e1000_get_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return E1000_SUCCESS; + + + /* Get the FW semaphore. */ + timeout = hw->eeprom.word_size + 1; + while(timeout) { + swsm = E1000_READ_REG(hw, SWSM); + swsm |= E1000_SWSM_SWESMBI; + E1000_WRITE_REG(hw, SWSM, swsm); + /* if we managed to set the bit we got the semaphore. */ + swsm = E1000_READ_REG(hw, SWSM); + if(swsm & E1000_SWSM_SWESMBI) + break; + + udelay(50); + timeout--; + } + + if(!timeout) { + /* Release semaphores */ + e1000_put_hw_eeprom_semaphore(hw); + DEBUGOUT("Driver can't access the Eeprom - SWESMBI bit is set.\n"); + return -E1000_ERR_EEPROM; + } + + return E1000_SUCCESS; +} + +/*************************************************************************** + * This function clears HW semaphore bits. + * + * hw: Struct containing variables accessed by shared code + * + * returns: - None. + * + ***************************************************************************/ +void +e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw) +{ + uint32_t swsm; + + DEBUGFUNC("e1000_put_hw_eeprom_semaphore"); + + if(!hw->eeprom_semaphore_present) + return; + + swsm = E1000_READ_REG(hw, SWSM); + /* Release both semaphores. */ + swsm &= ~(E1000_SWSM_SMBI | E1000_SWSM_SWESMBI); + E1000_WRITE_REG(hw, SWSM, swsm); +} + +/****************************************************************************** + * Checks if PHY reset is blocked due to SOL/IDER session, for example. + * Returning E1000_BLK_PHY_RESET isn't necessarily an error. But it's up to + * the caller to figure out how to deal with it. + * + * hw - Struct containing variables accessed by shared code + * + * returns: - E1000_BLK_PHY_RESET + * E1000_SUCCESS + * + *****************************************************************************/ +int32_t +e1000_check_phy_reset_block(struct e1000_hw *hw) +{ + uint32_t manc = 0; + if(hw->mac_type > e1000_82547_rev_2) + manc = E1000_READ_REG(hw, MANC); + return (manc & E1000_MANC_BLK_PHY_RST_ON_IDE) ? + E1000_BLK_PHY_RESET : E1000_SUCCESS; +} + +uint8_t +e1000_arc_subsystem_valid(struct e1000_hw *hw) +{ + uint32_t fwsm; + + /* On 8257x silicon, registers in the range of 0x8800 - 0x8FFC + * may not be provided a DMA clock when no manageability features are + * enabled. We do not want to perform any reads/writes to these registers + * if this is the case. We read FWSM to determine the manageability mode. + */ + switch (hw->mac_type) { + case e1000_82573: + fwsm = E1000_READ_REG(hw, FWSM); + if((fwsm & E1000_FWSM_MODE_MASK) != 0) + return TRUE; + break; + default: + break; + } + return FALSE; +} + + + diff --git a/drivers/net/e1000/e1000_hw.h b/drivers/net/e1000/e1000_hw.h index f397e637a3c..a0263ee96c6 100644 --- a/drivers/net/e1000/e1000_hw.h +++ b/drivers/net/e1000/e1000_hw.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -57,6 +57,7 @@ typedef enum { e1000_82541_rev_2, e1000_82547, e1000_82547_rev_2, + e1000_82573, e1000_num_macs } e1000_mac_type; @@ -64,6 +65,7 @@ typedef enum { e1000_eeprom_uninitialized = 0, e1000_eeprom_spi, e1000_eeprom_microwire, + e1000_eeprom_flash, e1000_num_eeprom_types } e1000_eeprom_type; @@ -96,6 +98,7 @@ typedef enum { e1000_bus_type_unknown = 0, e1000_bus_type_pci, e1000_bus_type_pcix, + e1000_bus_type_pci_express, e1000_bus_type_reserved } e1000_bus_type; @@ -107,6 +110,7 @@ typedef enum { e1000_bus_speed_100, e1000_bus_speed_120, e1000_bus_speed_133, + e1000_bus_speed_2500, e1000_bus_speed_reserved } e1000_bus_speed; @@ -115,6 +119,8 @@ typedef enum { e1000_bus_width_unknown = 0, e1000_bus_width_32, e1000_bus_width_64, + e1000_bus_width_pciex_1, + e1000_bus_width_pciex_4, e1000_bus_width_reserved } e1000_bus_width; @@ -196,6 +202,7 @@ typedef enum { typedef enum { e1000_phy_m88 = 0, e1000_phy_igp, + e1000_phy_igp_2, e1000_phy_undefined = 0xFF } e1000_phy_type; @@ -242,8 +249,19 @@ struct e1000_eeprom_info { uint16_t address_bits; uint16_t delay_usec; uint16_t page_size; + boolean_t use_eerd; + boolean_t use_eewr; }; +/* Flex ASF Information */ +#define E1000_HOST_IF_MAX_SIZE 2048 + +typedef enum { + e1000_byte_align = 0, + e1000_word_align = 1, + e1000_dword_align = 2 +} e1000_align_type; + /* Error Codes */ @@ -254,11 +272,16 @@ struct e1000_eeprom_info { #define E1000_ERR_PARAM 4 #define E1000_ERR_MAC_TYPE 5 #define E1000_ERR_PHY_TYPE 6 +#define E1000_ERR_RESET 9 +#define E1000_ERR_MASTER_REQUESTS_PENDING 10 +#define E1000_ERR_HOST_INTERFACE_COMMAND 11 +#define E1000_BLK_PHY_RESET 12 /* Function prototypes */ /* Initialization */ int32_t e1000_reset_hw(struct e1000_hw *hw); int32_t e1000_init_hw(struct e1000_hw *hw); +int32_t e1000_id_led_init(struct e1000_hw * hw); int32_t e1000_set_mac_type(struct e1000_hw *hw); void e1000_set_media_type(struct e1000_hw *hw); @@ -275,7 +298,7 @@ int32_t e1000_force_mac_fc(struct e1000_hw *hw); /* PHY */ int32_t e1000_read_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t *phy_data); int32_t e1000_write_phy_reg(struct e1000_hw *hw, uint32_t reg_addr, uint16_t data); -void e1000_phy_hw_reset(struct e1000_hw *hw); +int32_t e1000_phy_hw_reset(struct e1000_hw *hw); int32_t e1000_phy_reset(struct e1000_hw *hw); int32_t e1000_detect_gig_phy(struct e1000_hw *hw); int32_t e1000_phy_get_info(struct e1000_hw *hw, struct e1000_phy_info *phy_info); @@ -287,13 +310,86 @@ int32_t e1000_check_downshift(struct e1000_hw *hw); int32_t e1000_validate_mdi_setting(struct e1000_hw *hw); /* EEPROM Functions */ -void e1000_init_eeprom_params(struct e1000_hw *hw); +int32_t e1000_init_eeprom_params(struct e1000_hw *hw); +boolean_t e1000_is_onboard_nvm_eeprom(struct e1000_hw *hw); +int32_t e1000_read_eeprom_eerd(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_write_eeprom_eewr(struct e1000_hw *hw, uint16_t offset, uint16_t words, uint16_t *data); +int32_t e1000_poll_eerd_eewr_done(struct e1000_hw *hw, int eerd); + +/* MNG HOST IF functions */ +uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); + +#define E1000_MNG_DHCP_TX_PAYLOAD_CMD 64 +#define E1000_HI_MAX_MNG_DATA_LENGTH 0x6F8 /* Host Interface data length */ + +#define E1000_MNG_DHCP_COMMAND_TIMEOUT 10 /* Time in ms to process MNG command */ +#define E1000_MNG_DHCP_COOKIE_OFFSET 0x6F0 /* Cookie offset */ +#define E1000_MNG_DHCP_COOKIE_LENGTH 0x10 /* Cookie length */ +#define E1000_MNG_IAMT_MODE 0x3 +#define E1000_IAMT_SIGNATURE 0x544D4149 /* Intel(R) Active Management Technology signature */ + +#define E1000_MNG_DHCP_COOKIE_STATUS_PARSING_SUPPORT 0x1 /* DHCP parsing enabled */ +#define E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT 0x2 /* DHCP parsing enabled */ +#define E1000_VFTA_ENTRY_SHIFT 0x5 +#define E1000_VFTA_ENTRY_MASK 0x7F +#define E1000_VFTA_ENTRY_BIT_SHIFT_MASK 0x1F + +struct e1000_host_mng_command_header { + uint8_t command_id; + uint8_t checksum; + uint16_t reserved1; + uint16_t reserved2; + uint16_t command_length; +}; + +struct e1000_host_mng_command_info { + struct e1000_host_mng_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_MNG_DATA_LENGTH]; /* Command data can length 0..0x658*/ +}; +#ifdef __BIG_ENDIAN +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint16_t vlan_id; + uint8_t reserved0; + uint8_t status; + uint32_t reserved1; + uint8_t checksum; + uint8_t reserved3; + uint16_t reserved2; +}; +#else +struct e1000_host_mng_dhcp_cookie{ + uint32_t signature; + uint8_t status; + uint8_t reserved0; + uint16_t vlan_id; + uint32_t reserved1; + uint16_t reserved2; + uint8_t reserved3; + uint8_t checksum; +}; +#endif + +int32_t e1000_mng_write_dhcp_info(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length); +boolean_t e1000_check_mng_mode(struct e1000_hw *hw); +boolean_t e1000_enable_tx_pkt_filtering(struct e1000_hw *hw); +int32_t e1000_mng_enable_host_if(struct e1000_hw *hw); +int32_t e1000_mng_host_if_write(struct e1000_hw *hw, uint8_t *buffer, + uint16_t length, uint16_t offset, uint8_t *sum); +int32_t e1000_mng_write_cmd_header(struct e1000_hw* hw, + struct e1000_host_mng_command_header* hdr); + +int32_t e1000_mng_write_commit(struct e1000_hw *hw); + int32_t e1000_read_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_validate_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_update_eeprom_checksum(struct e1000_hw *hw); int32_t e1000_write_eeprom(struct e1000_hw *hw, uint16_t reg, uint16_t words, uint16_t *data); int32_t e1000_read_part_num(struct e1000_hw *hw, uint32_t * part_num); int32_t e1000_read_mac_addr(struct e1000_hw * hw); +int32_t e1000_swfw_sync_acquire(struct e1000_hw *hw, uint16_t mask); +void e1000_swfw_sync_release(struct e1000_hw *hw, uint16_t mask); /* Filters (multicast, vlan, receive) */ void e1000_init_rx_addrs(struct e1000_hw *hw); @@ -313,7 +409,6 @@ int32_t e1000_led_off(struct e1000_hw *hw); /* Adaptive IFS Functions */ /* Everything else */ -uint32_t e1000_enable_mng_pass_thru(struct e1000_hw *hw); void e1000_clear_hw_cntrs(struct e1000_hw *hw); void e1000_reset_adaptive(struct e1000_hw *hw); void e1000_update_adaptive(struct e1000_hw *hw); @@ -330,6 +425,19 @@ void e1000_io_write(struct e1000_hw *hw, unsigned long port, uint32_t value); void e1000_write_reg_io(struct e1000_hw *hw, uint32_t offset, uint32_t value); int32_t e1000_config_dsp_after_link_change(struct e1000_hw *hw, boolean_t link_up); int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); +int32_t e1000_set_d0_lplu_state(struct e1000_hw *hw, boolean_t active); +void e1000_set_pci_express_master_disable(struct e1000_hw *hw); +void e1000_enable_pciex_master(struct e1000_hw *hw); +int32_t e1000_disable_pciex_master(struct e1000_hw *hw); +int32_t e1000_get_auto_rd_done(struct e1000_hw *hw); +int32_t e1000_get_phy_cfg_done(struct e1000_hw *hw); +int32_t e1000_get_software_semaphore(struct e1000_hw *hw); +void e1000_release_software_semaphore(struct e1000_hw *hw); +int32_t e1000_check_phy_reset_block(struct e1000_hw *hw); +int32_t e1000_get_hw_eeprom_semaphore(struct e1000_hw *hw); +void e1000_put_hw_eeprom_semaphore(struct e1000_hw *hw); +int32_t e1000_commit_shadow_ram(struct e1000_hw *hw); +uint8_t e1000_arc_subsystem_valid(struct e1000_hw *hw); #define E1000_READ_REG_IO(a, reg) \ e1000_read_reg_io((a), E1000_##reg) @@ -369,6 +477,10 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_DEV_ID_82546GB_SERDES 0x107B #define E1000_DEV_ID_82546GB_PCIE 0x108A #define E1000_DEV_ID_82547EI 0x1019 +#define E1000_DEV_ID_82573E 0x108B +#define E1000_DEV_ID_82573E_IAMT 0x108C + +#define E1000_DEV_ID_82546GB_QUAD_COPPER 0x1099 #define NODE_ADDRESS_SIZE 6 #define ETH_LENGTH_OF_ADDRESS 6 @@ -381,6 +493,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); #define E1000_REVISION_0 0 #define E1000_REVISION_1 1 #define E1000_REVISION_2 2 +#define E1000_REVISION_3 3 #define SPEED_10 10 #define SPEED_100 100 @@ -437,6 +550,7 @@ int32_t e1000_set_d3_lplu_state(struct e1000_hw *hw, boolean_t active); E1000_IMS_RXSEQ | \ E1000_IMS_LSC) + /* Number of high/low register pairs in the RAR. The RAR (Receive Address * Registers) holds the directed and multicast addresses that we monitor. We * reserve one of these spots for our directed address, allowing us room for @@ -457,14 +571,74 @@ struct e1000_rx_desc { uint16_t special; }; +/* Receive Descriptor - Extended */ +union e1000_rx_desc_extended { + struct { + uint64_t buffer_addr; + uint64_t reserved; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length; + uint16_t vlan; /* VLAN tag */ + } upper; + } wb; /* writeback */ +}; + +#define MAX_PS_BUFFERS 4 +/* Receive Descriptor - Packet Split */ +union e1000_rx_desc_packet_split { + struct { + /* one buffer for protocol header(s), three data buffers */ + uint64_t buffer_addr[MAX_PS_BUFFERS]; + } read; + struct { + struct { + uint32_t mrq; /* Multiple Rx Queues */ + union { + uint32_t rss; /* RSS Hash */ + struct { + uint16_t ip_id; /* IP id */ + uint16_t csum; /* Packet Checksum */ + } csum_ip; + } hi_dword; + } lower; + struct { + uint32_t status_error; /* ext status/error */ + uint16_t length0; /* length of buffer 0 */ + uint16_t vlan; /* VLAN tag */ + } middle; + struct { + uint16_t header_status; + uint16_t length[3]; /* length of buffers 1-3 */ + } upper; + uint64_t reserved; + } wb; /* writeback */ +}; + /* Receive Decriptor bit definitions */ #define E1000_RXD_STAT_DD 0x01 /* Descriptor Done */ #define E1000_RXD_STAT_EOP 0x02 /* End of Packet */ #define E1000_RXD_STAT_IXSM 0x04 /* Ignore checksum */ #define E1000_RXD_STAT_VP 0x08 /* IEEE VLAN Packet */ +#define E1000_RXD_STAT_UDPCS 0x10 /* UDP xsum caculated */ #define E1000_RXD_STAT_TCPCS 0x20 /* TCP xsum calculated */ #define E1000_RXD_STAT_IPCS 0x40 /* IP xsum calculated */ #define E1000_RXD_STAT_PIF 0x80 /* passed in-exact filter */ +#define E1000_RXD_STAT_IPIDV 0x200 /* IP identification valid */ +#define E1000_RXD_STAT_UDPV 0x400 /* Valid UDP checksum */ +#define E1000_RXD_STAT_ACK 0x8000 /* ACK Packet indication */ #define E1000_RXD_ERR_CE 0x01 /* CRC Error */ #define E1000_RXD_ERR_SE 0x02 /* Symbol Error */ #define E1000_RXD_ERR_SEQ 0x04 /* Sequence Error */ @@ -474,9 +648,20 @@ struct e1000_rx_desc { #define E1000_RXD_ERR_RXE 0x80 /* Rx Data Error */ #define E1000_RXD_SPC_VLAN_MASK 0x0FFF /* VLAN ID is in lower 12 bits */ #define E1000_RXD_SPC_PRI_MASK 0xE000 /* Priority is in upper 3 bits */ -#define E1000_RXD_SPC_PRI_SHIFT 0x000D /* Priority is in upper 3 of 16 */ +#define E1000_RXD_SPC_PRI_SHIFT 13 #define E1000_RXD_SPC_CFI_MASK 0x1000 /* CFI is bit 12 */ -#define E1000_RXD_SPC_CFI_SHIFT 0x000C /* CFI is bit 12 */ +#define E1000_RXD_SPC_CFI_SHIFT 12 + +#define E1000_RXDEXT_STATERR_CE 0x01000000 +#define E1000_RXDEXT_STATERR_SE 0x02000000 +#define E1000_RXDEXT_STATERR_SEQ 0x04000000 +#define E1000_RXDEXT_STATERR_CXE 0x10000000 +#define E1000_RXDEXT_STATERR_TCPE 0x20000000 +#define E1000_RXDEXT_STATERR_IPE 0x40000000 +#define E1000_RXDEXT_STATERR_RXE 0x80000000 + +#define E1000_RXDPS_HDRSTAT_HDRSP 0x00008000 +#define E1000_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF /* mask to determine if packets should be dropped due to frame errors */ #define E1000_RXD_ERR_FRAME_ERR_MASK ( \ @@ -486,6 +671,15 @@ struct e1000_rx_desc { E1000_RXD_ERR_CXE | \ E1000_RXD_ERR_RXE) + +/* Same mask, but for extended and packet split descriptors */ +#define E1000_RXDEXT_ERR_FRAME_ERR_MASK ( \ + E1000_RXDEXT_STATERR_CE | \ + E1000_RXDEXT_STATERR_SE | \ + E1000_RXDEXT_STATERR_SEQ | \ + E1000_RXDEXT_STATERR_CXE | \ + E1000_RXDEXT_STATERR_RXE) + /* Transmit Descriptor */ struct e1000_tx_desc { uint64_t buffer_addr; /* Address of the descriptor's data buffer */ @@ -667,6 +861,7 @@ struct e1000_ffvt_entry { #define E1000_ICS 0x000C8 /* Interrupt Cause Set - WO */ #define E1000_IMS 0x000D0 /* Interrupt Mask Set - RW */ #define E1000_IMC 0x000D8 /* Interrupt Mask Clear - WO */ +#define E1000_IAM 0x000E0 /* Interrupt Acknowledge Auto Mask */ #define E1000_RCTL 0x00100 /* RX Control - RW */ #define E1000_FCTTV 0x00170 /* Flow Control Transmit Timer Value - RW */ #define E1000_TXCW 0x00178 /* TX Configuration Word - RW */ @@ -676,9 +871,23 @@ struct e1000_ffvt_entry { #define E1000_TBT 0x00448 /* TX Burst Timer - RW */ #define E1000_AIT 0x00458 /* Adaptive Interframe Spacing Throttle - RW */ #define E1000_LEDCTL 0x00E00 /* LED Control - RW */ +#define E1000_EXTCNF_CTRL 0x00F00 /* Extended Configuration Control */ +#define E1000_EXTCNF_SIZE 0x00F08 /* Extended Configuration Size */ #define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */ +#define E1000_PBS 0x01008 /* Packet Buffer Size */ +#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */ +#define E1000_FLASH_UPDATES 1000 +#define E1000_EEARBC 0x01024 /* EEPROM Auto Read Bus Control */ +#define E1000_FLASHT 0x01028 /* FLASH Timer Register */ +#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */ +#define E1000_FLSWCTL 0x01030 /* FLASH control register */ +#define E1000_FLSWDATA 0x01034 /* FLASH data register */ +#define E1000_FLSWCNT 0x01038 /* FLASH Access Counter */ +#define E1000_FLOP 0x0103C /* FLASH Opcode Register */ +#define E1000_ERT 0x02008 /* Early Rx Threshold - RW */ #define E1000_FCRTL 0x02160 /* Flow Control Receive Threshold Low - RW */ #define E1000_FCRTH 0x02168 /* Flow Control Receive Threshold High - RW */ +#define E1000_PSRCTL 0x02170 /* Packet Split Receive Control - RW */ #define E1000_RDBAL 0x02800 /* RX Descriptor Base Address Low - RW */ #define E1000_RDBAH 0x02804 /* RX Descriptor Base Address High - RW */ #define E1000_RDLEN 0x02808 /* RX Descriptor Length - RW */ @@ -688,6 +897,7 @@ struct e1000_ffvt_entry { #define E1000_RXDCTL 0x02828 /* RX Descriptor Control - RW */ #define E1000_RADV 0x0282C /* RX Interrupt Absolute Delay Timer - RW */ #define E1000_RSRPD 0x02C00 /* RX Small Packet Detect - RW */ +#define E1000_RAID 0x02C08 /* Receive Ack Interrupt Delay - RW */ #define E1000_TXDMAC 0x03000 /* TX DMA Control - RW */ #define E1000_TDFH 0x03410 /* TX Data FIFO Head - RW */ #define E1000_TDFT 0x03418 /* TX Data FIFO Tail - RW */ @@ -703,6 +913,14 @@ struct e1000_ffvt_entry { #define E1000_TXDCTL 0x03828 /* TX Descriptor Control - RW */ #define E1000_TADV 0x0382C /* TX Interrupt Absolute Delay Val - RW */ #define E1000_TSPMT 0x03830 /* TCP Segmentation PAD & Min Threshold - RW */ +#define E1000_TARC0 0x03840 /* TX Arbitration Count (0) */ +#define E1000_TDBAL1 0x03900 /* TX Desc Base Address Low (1) - RW */ +#define E1000_TDBAH1 0x03904 /* TX Desc Base Address High (1) - RW */ +#define E1000_TDLEN1 0x03908 /* TX Desc Length (1) - RW */ +#define E1000_TDH1 0x03910 /* TX Desc Head (1) - RW */ +#define E1000_TDT1 0x03918 /* TX Desc Tail (1) - RW */ +#define E1000_TXDCTL1 0x03928 /* TX Descriptor Control (1) - RW */ +#define E1000_TARC1 0x03940 /* TX Arbitration Count (1) */ #define E1000_CRCERRS 0x04000 /* CRC Error Count - R/clr */ #define E1000_ALGNERRC 0x04004 /* Alignment Error Count - R/clr */ #define E1000_SYMERRS 0x04008 /* Symbol Error Count - R/clr */ @@ -761,7 +979,17 @@ struct e1000_ffvt_entry { #define E1000_BPTC 0x040F4 /* Broadcast Packets TX Count - R/clr */ #define E1000_TSCTC 0x040F8 /* TCP Segmentation Context TX - R/clr */ #define E1000_TSCTFC 0x040FC /* TCP Segmentation Context TX Fail - R/clr */ +#define E1000_IAC 0x4100 /* Interrupt Assertion Count */ +#define E1000_ICRXPTC 0x4104 /* Interrupt Cause Rx Packet Timer Expire Count */ +#define E1000_ICRXATC 0x4108 /* Interrupt Cause Rx Absolute Timer Expire Count */ +#define E1000_ICTXPTC 0x410C /* Interrupt Cause Tx Packet Timer Expire Count */ +#define E1000_ICTXATC 0x4110 /* Interrupt Cause Tx Absolute Timer Expire Count */ +#define E1000_ICTXQEC 0x4118 /* Interrupt Cause Tx Queue Empty Count */ +#define E1000_ICTXQMTC 0x411C /* Interrupt Cause Tx Queue Minimum Threshold Count */ +#define E1000_ICRXDMTC 0x4120 /* Interrupt Cause Rx Descriptor Minimum Threshold Count */ +#define E1000_ICRXOC 0x4124 /* Interrupt Cause Receiver Overrun Count */ #define E1000_RXCSUM 0x05000 /* RX Checksum Control - RW */ +#define E1000_RFCTL 0x05008 /* Receive Filter Control*/ #define E1000_MTA 0x05200 /* Multicast Table Array - RW Array */ #define E1000_RA 0x05400 /* Receive Address - RW Array */ #define E1000_VFTA 0x05600 /* VLAN Filter Table Array - RW Array */ @@ -779,6 +1007,16 @@ struct e1000_ffvt_entry { #define E1000_FFMT 0x09000 /* Flexible Filter Mask Table - RW Array */ #define E1000_FFVT 0x09800 /* Flexible Filter Value Table - RW Array */ +#define E1000_GCR 0x05B00 /* PCI-Ex Control */ +#define E1000_GSCL_1 0x05B10 /* PCI-Ex Statistic Control #1 */ +#define E1000_GSCL_2 0x05B14 /* PCI-Ex Statistic Control #2 */ +#define E1000_GSCL_3 0x05B18 /* PCI-Ex Statistic Control #3 */ +#define E1000_GSCL_4 0x05B1C /* PCI-Ex Statistic Control #4 */ +#define E1000_FACTPS 0x05B30 /* Function Active and Power State to MNG */ +#define E1000_SWSM 0x05B50 /* SW Semaphore */ +#define E1000_FWSM 0x05B54 /* FW Semaphore */ +#define E1000_FFLT_DBG 0x05F04 /* Debug Register */ +#define E1000_HICR 0x08F00 /* Host Inteface Control */ /* Register Set (82542) * * Some of the 82542 registers are located at different offsets than they are @@ -829,6 +1067,18 @@ struct e1000_ffvt_entry { #define E1000_82542_VFTA 0x00600 #define E1000_82542_LEDCTL E1000_LEDCTL #define E1000_82542_PBA E1000_PBA +#define E1000_82542_PBS E1000_PBS +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_EEARBC E1000_EEARBC +#define E1000_82542_FLASHT E1000_FLASHT +#define E1000_82542_EEWR E1000_EEWR +#define E1000_82542_FLSWCTL E1000_FLSWCTL +#define E1000_82542_FLSWDATA E1000_FLSWDATA +#define E1000_82542_FLSWCNT E1000_FLSWCNT +#define E1000_82542_FLOP E1000_FLOP +#define E1000_82542_EXTCNF_CTRL E1000_EXTCNF_CTRL +#define E1000_82542_EXTCNF_SIZE E1000_EXTCNF_SIZE +#define E1000_82542_ERT E1000_ERT #define E1000_82542_RXDCTL E1000_RXDCTL #define E1000_82542_RADV E1000_RADV #define E1000_82542_RSRPD E1000_RSRPD @@ -913,6 +1163,38 @@ struct e1000_ffvt_entry { #define E1000_82542_FFMT E1000_FFMT #define E1000_82542_FFVT E1000_FFVT #define E1000_82542_HOST_IF E1000_HOST_IF +#define E1000_82542_IAM E1000_IAM +#define E1000_82542_EEMNGCTL E1000_EEMNGCTL +#define E1000_82542_PSRCTL E1000_PSRCTL +#define E1000_82542_RAID E1000_RAID +#define E1000_82542_TARC0 E1000_TARC0 +#define E1000_82542_TDBAL1 E1000_TDBAL1 +#define E1000_82542_TDBAH1 E1000_TDBAH1 +#define E1000_82542_TDLEN1 E1000_TDLEN1 +#define E1000_82542_TDH1 E1000_TDH1 +#define E1000_82542_TDT1 E1000_TDT1 +#define E1000_82542_TXDCTL1 E1000_TXDCTL1 +#define E1000_82542_TARC1 E1000_TARC1 +#define E1000_82542_RFCTL E1000_RFCTL +#define E1000_82542_GCR E1000_GCR +#define E1000_82542_GSCL_1 E1000_GSCL_1 +#define E1000_82542_GSCL_2 E1000_GSCL_2 +#define E1000_82542_GSCL_3 E1000_GSCL_3 +#define E1000_82542_GSCL_4 E1000_GSCL_4 +#define E1000_82542_FACTPS E1000_FACTPS +#define E1000_82542_SWSM E1000_SWSM +#define E1000_82542_FWSM E1000_FWSM +#define E1000_82542_FFLT_DBG E1000_FFLT_DBG +#define E1000_82542_IAC E1000_IAC +#define E1000_82542_ICRXPTC E1000_ICRXPTC +#define E1000_82542_ICRXATC E1000_ICRXATC +#define E1000_82542_ICTXPTC E1000_ICTXPTC +#define E1000_82542_ICTXATC E1000_ICTXATC +#define E1000_82542_ICTXQEC E1000_ICTXQEC +#define E1000_82542_ICTXQMTC E1000_ICTXQMTC +#define E1000_82542_ICRXDMTC E1000_ICRXDMTC +#define E1000_82542_ICRXOC E1000_ICRXOC +#define E1000_82542_HICR E1000_HICR /* Statistics counters collected by the MAC */ struct e1000_hw_stats { @@ -974,11 +1256,21 @@ struct e1000_hw_stats { uint64_t bptc; uint64_t tsctc; uint64_t tsctfc; + uint64_t iac; + uint64_t icrxptc; + uint64_t icrxatc; + uint64_t ictxptc; + uint64_t ictxatc; + uint64_t ictxqec; + uint64_t ictxqmtc; + uint64_t icrxdmtc; + uint64_t icrxoc; }; /* Structure containing variables used by the shared code (e1000_hw.c) */ struct e1000_hw { - uint8_t __iomem *hw_addr; + uint8_t *hw_addr; + uint8_t *flash_address; e1000_mac_type mac_type; e1000_phy_type phy_type; uint32_t phy_init_script; @@ -993,6 +1285,7 @@ struct e1000_hw { e1000_ms_type original_master_slave; e1000_ffe_config ffe_config_state; uint32_t asf_firmware_present; + uint32_t eeprom_semaphore_present; unsigned long io_base; uint32_t phy_id; uint32_t phy_revision; @@ -1009,6 +1302,8 @@ struct e1000_hw { uint32_t ledctl_default; uint32_t ledctl_mode1; uint32_t ledctl_mode2; + boolean_t tx_pkt_filtering; + struct e1000_host_mng_dhcp_cookie mng_cookie; uint16_t phy_spd_default; uint16_t autoneg_advertised; uint16_t pci_cmd_word; @@ -1047,16 +1342,24 @@ struct e1000_hw { boolean_t adaptive_ifs; boolean_t ifs_params_forced; boolean_t in_ifs_mode; + boolean_t mng_reg_access_disabled; }; #define E1000_EEPROM_SWDPIN0 0x0001 /* SWDPIN 0 EEPROM Value */ #define E1000_EEPROM_LED_LOGIC 0x0020 /* Led Logic Word */ +#define E1000_EEPROM_RW_REG_DATA 16 /* Offset to data in EEPROM read/write registers */ +#define E1000_EEPROM_RW_REG_DONE 2 /* Offset to READ/WRITE done bit */ +#define E1000_EEPROM_RW_REG_START 1 /* First bit for telling part to start operation */ +#define E1000_EEPROM_RW_ADDR_SHIFT 2 /* Shift to the address bits */ +#define E1000_EEPROM_POLL_WRITE 1 /* Flag for polling for write complete */ +#define E1000_EEPROM_POLL_READ 0 /* Flag for polling for read complete */ /* Register Bit Masks */ /* Device Control */ #define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */ #define E1000_CTRL_BEM 0x00000002 /* Endian Mode.0=little,1=big */ #define E1000_CTRL_PRIOR 0x00000004 /* Priority on PCI. 0=rx,1=fair */ +#define E1000_CTRL_GIO_MASTER_DISABLE 0x00000004 /*Blocks new Master requests */ #define E1000_CTRL_LRST 0x00000008 /* Link reset. 0=normal,1=reset */ #define E1000_CTRL_TME 0x00000010 /* Test mode. 0=normal,1=test */ #define E1000_CTRL_SLE 0x00000020 /* Serial Link on 0=dis,1=en */ @@ -1070,6 +1373,7 @@ struct e1000_hw { #define E1000_CTRL_BEM32 0x00000400 /* Big Endian 32 mode */ #define E1000_CTRL_FRCSPD 0x00000800 /* Force Speed */ #define E1000_CTRL_FRCDPX 0x00001000 /* Force Duplex */ +#define E1000_CTRL_D_UD_POLARITY 0x00004000 /* Defined polarity of Dock/Undock indication in SDP[0] */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ #define E1000_CTRL_SWDPIN2 0x00100000 /* SWDPIN 2 value */ @@ -1089,6 +1393,7 @@ struct e1000_hw { #define E1000_STATUS_FD 0x00000001 /* Full duplex.0=half,1=full */ #define E1000_STATUS_LU 0x00000002 /* Link up.0=no,1=link */ #define E1000_STATUS_FUNC_MASK 0x0000000C /* PCI Function Mask */ +#define E1000_STATUS_FUNC_SHIFT 2 #define E1000_STATUS_FUNC_0 0x00000000 /* Function 0 */ #define E1000_STATUS_FUNC_1 0x00000004 /* Function 1 */ #define E1000_STATUS_TXOFF 0x00000010 /* transmission paused */ @@ -1098,6 +1403,8 @@ struct e1000_hw { #define E1000_STATUS_SPEED_100 0x00000040 /* Speed 100Mb/s */ #define E1000_STATUS_SPEED_1000 0x00000080 /* Speed 1000Mb/s */ #define E1000_STATUS_ASDV 0x00000300 /* Auto speed detect value */ +#define E1000_STATUS_DOCK_CI 0x00000800 /* Change in Dock/Undock state. Clear on write '0'. */ +#define E1000_STATUS_GIO_MASTER_ENABLE 0x00080000 /* Status of Master requests. */ #define E1000_STATUS_MTXCKOK 0x00000400 /* MTX clock running OK */ #define E1000_STATUS_PCI66 0x00000800 /* In 66Mhz slot */ #define E1000_STATUS_BUS64 0x00001000 /* In 64 bit slot */ @@ -1128,6 +1435,18 @@ struct e1000_hw { #ifndef E1000_EEPROM_GRANT_ATTEMPTS #define E1000_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */ #endif +#define E1000_EECD_AUTO_RD 0x00000200 /* EEPROM Auto Read done */ +#define E1000_EECD_SIZE_EX_MASK 0x00007800 /* EEprom Size */ +#define E1000_EECD_SIZE_EX_SHIFT 11 +#define E1000_EECD_NVADDS 0x00018000 /* NVM Address Size */ +#define E1000_EECD_SELSHAD 0x00020000 /* Select Shadow RAM */ +#define E1000_EECD_INITSRAM 0x00040000 /* Initialize Shadow RAM */ +#define E1000_EECD_FLUPD 0x00080000 /* Update FLASH */ +#define E1000_EECD_AUPDEN 0x00100000 /* Enable Autonomous FLASH update */ +#define E1000_EECD_SHADV 0x00200000 /* Shadow RAM Data Valid */ +#define E1000_EECD_SEC1VAL 0x00400000 /* Sector One Valid */ +#define E1000_STM_OPCODE 0xDB00 +#define E1000_HICR_FW_RESET 0xC0 /* EEPROM Read */ #define E1000_EERD_START 0x00000001 /* Start Read */ @@ -1171,6 +1490,8 @@ struct e1000_hw { #define E1000_CTRL_EXT_WR_WMARK_320 0x01000000 #define E1000_CTRL_EXT_WR_WMARK_384 0x02000000 #define E1000_CTRL_EXT_WR_WMARK_448 0x03000000 +#define E1000_CTRL_EXT_IAME 0x08000000 /* Interrupt acknowledge Auto-mask */ +#define E1000_CTRL_EXT_INT_TIMER_CLR 0x20000000 /* Clear Interrupt timers after IMS clear */ /* MDI Control */ #define E1000_MDIC_DATA_MASK 0x0000FFFF @@ -1187,14 +1508,17 @@ struct e1000_hw { /* LED Control */ #define E1000_LEDCTL_LED0_MODE_MASK 0x0000000F #define E1000_LEDCTL_LED0_MODE_SHIFT 0 +#define E1000_LEDCTL_LED0_BLINK_RATE 0x0000020 #define E1000_LEDCTL_LED0_IVRT 0x00000040 #define E1000_LEDCTL_LED0_BLINK 0x00000080 #define E1000_LEDCTL_LED1_MODE_MASK 0x00000F00 #define E1000_LEDCTL_LED1_MODE_SHIFT 8 +#define E1000_LEDCTL_LED1_BLINK_RATE 0x0002000 #define E1000_LEDCTL_LED1_IVRT 0x00004000 #define E1000_LEDCTL_LED1_BLINK 0x00008000 #define E1000_LEDCTL_LED2_MODE_MASK 0x000F0000 #define E1000_LEDCTL_LED2_MODE_SHIFT 16 +#define E1000_LEDCTL_LED2_BLINK_RATE 0x00200000 #define E1000_LEDCTL_LED2_IVRT 0x00400000 #define E1000_LEDCTL_LED2_BLINK 0x00800000 #define E1000_LEDCTL_LED3_MODE_MASK 0x0F000000 @@ -1238,6 +1562,10 @@ struct e1000_hw { #define E1000_ICR_GPI_EN3 0x00004000 /* GP Int 3 */ #define E1000_ICR_TXD_LOW 0x00008000 #define E1000_ICR_SRPD 0x00010000 +#define E1000_ICR_ACK 0x00020000 /* Receive Ack frame */ +#define E1000_ICR_MNG 0x00040000 /* Manageability event */ +#define E1000_ICR_DOCK 0x00080000 /* Dock/Undock */ +#define E1000_ICR_INT_ASSERTED 0x80000000 /* If this bit asserted, the driver should claim the interrupt */ /* Interrupt Cause Set */ #define E1000_ICS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1255,6 +1583,9 @@ struct e1000_hw { #define E1000_ICS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_ICS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_ICS_SRPD E1000_ICR_SRPD +#define E1000_ICS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_ICS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_ICS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Set */ #define E1000_IMS_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1272,6 +1603,9 @@ struct e1000_hw { #define E1000_IMS_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMS_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMS_SRPD E1000_ICR_SRPD +#define E1000_IMS_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMS_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMS_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Interrupt Mask Clear */ #define E1000_IMC_TXDW E1000_ICR_TXDW /* Transmit desc written back */ @@ -1289,6 +1623,9 @@ struct e1000_hw { #define E1000_IMC_GPI_EN3 E1000_ICR_GPI_EN3 /* GP Int 3 */ #define E1000_IMC_TXD_LOW E1000_ICR_TXD_LOW #define E1000_IMC_SRPD E1000_ICR_SRPD +#define E1000_IMC_ACK E1000_ICR_ACK /* Receive Ack frame */ +#define E1000_IMC_MNG E1000_ICR_MNG /* Manageability event */ +#define E1000_IMC_DOCK E1000_ICR_DOCK /* Dock/Undock */ /* Receive Control */ #define E1000_RCTL_RST 0x00000001 /* Software reset */ @@ -1301,6 +1638,8 @@ struct e1000_hw { #define E1000_RCTL_LBM_MAC 0x00000040 /* MAC loopback mode */ #define E1000_RCTL_LBM_SLP 0x00000080 /* serial link loopback mode */ #define E1000_RCTL_LBM_TCVR 0x000000C0 /* tcvr loopback mode */ +#define E1000_RCTL_DTYP_MASK 0x00000C00 /* Descriptor type mask */ +#define E1000_RCTL_DTYP_PS 0x00000400 /* Packet Split descriptor */ #define E1000_RCTL_RDMTS_HALF 0x00000000 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_QUAT 0x00000100 /* rx desc min threshold size */ #define E1000_RCTL_RDMTS_EIGTH 0x00000200 /* rx desc min threshold size */ @@ -1327,6 +1666,34 @@ struct e1000_hw { #define E1000_RCTL_PMCF 0x00800000 /* pass MAC control frames */ #define E1000_RCTL_BSEX 0x02000000 /* Buffer size extension */ #define E1000_RCTL_SECRC 0x04000000 /* Strip Ethernet CRC */ +#define E1000_RCTL_FLXBUF_MASK 0x78000000 /* Flexible buffer size */ +#define E1000_RCTL_FLXBUF_SHIFT 27 /* Flexible buffer shift */ + +/* Use byte values for the following shift parameters + * Usage: + * psrctl |= (((ROUNDUP(value0, 128) >> E1000_PSRCTL_BSIZE0_SHIFT) & + * E1000_PSRCTL_BSIZE0_MASK) | + * ((ROUNDUP(value1, 1024) >> E1000_PSRCTL_BSIZE1_SHIFT) & + * E1000_PSRCTL_BSIZE1_MASK) | + * ((ROUNDUP(value2, 1024) << E1000_PSRCTL_BSIZE2_SHIFT) & + * E1000_PSRCTL_BSIZE2_MASK) | + * ((ROUNDUP(value3, 1024) << E1000_PSRCTL_BSIZE3_SHIFT) |; + * E1000_PSRCTL_BSIZE3_MASK)) + * where value0 = [128..16256], default=256 + * value1 = [1024..64512], default=4096 + * value2 = [0..64512], default=4096 + * value3 = [0..64512], default=0 + */ + +#define E1000_PSRCTL_BSIZE0_MASK 0x0000007F +#define E1000_PSRCTL_BSIZE1_MASK 0x00003F00 +#define E1000_PSRCTL_BSIZE2_MASK 0x003F0000 +#define E1000_PSRCTL_BSIZE3_MASK 0x3F000000 + +#define E1000_PSRCTL_BSIZE0_SHIFT 7 /* Shift _right_ 7 */ +#define E1000_PSRCTL_BSIZE1_SHIFT 2 /* Shift _right_ 2 */ +#define E1000_PSRCTL_BSIZE2_SHIFT 6 /* Shift _left_ 6 */ +#define E1000_PSRCTL_BSIZE3_SHIFT 14 /* Shift _left_ 14 */ /* Receive Descriptor */ #define E1000_RDT_DELAY 0x0000ffff /* Delay timer (1=1024us) */ @@ -1341,6 +1708,23 @@ struct e1000_hw { #define E1000_FCRTL_RTL 0x0000FFF8 /* Mask Bits[15:3] for RTL */ #define E1000_FCRTL_XONE 0x80000000 /* Enable XON frame transmission */ +/* Header split receive */ +#define E1000_RFCTL_ISCSI_DIS 0x00000001 +#define E1000_RFCTL_ISCSI_DWC_MASK 0x0000003E +#define E1000_RFCTL_ISCSI_DWC_SHIFT 1 +#define E1000_RFCTL_NFSW_DIS 0x00000040 +#define E1000_RFCTL_NFSR_DIS 0x00000080 +#define E1000_RFCTL_NFS_VER_MASK 0x00000300 +#define E1000_RFCTL_NFS_VER_SHIFT 8 +#define E1000_RFCTL_IPV6_DIS 0x00000400 +#define E1000_RFCTL_IPV6_XSUM_DIS 0x00000800 +#define E1000_RFCTL_ACK_DIS 0x00001000 +#define E1000_RFCTL_ACKD_DIS 0x00002000 +#define E1000_RFCTL_IPFRSP_DIS 0x00004000 +#define E1000_RFCTL_EXTEN 0x00008000 +#define E1000_RFCTL_IPV6_EX_DIS 0x00010000 +#define E1000_RFCTL_NEW_IPV6_EXT_DIS 0x00020000 + /* Receive Descriptor Control */ #define E1000_RXDCTL_PTHRESH 0x0000003F /* RXDCTL Prefetch Threshold */ #define E1000_RXDCTL_HTHRESH 0x00003F00 /* RXDCTL Host Threshold */ @@ -1354,6 +1738,8 @@ struct e1000_hw { #define E1000_TXDCTL_GRAN 0x01000000 /* TXDCTL Granularity */ #define E1000_TXDCTL_LWTHRESH 0xFE000000 /* TXDCTL Low Threshold */ #define E1000_TXDCTL_FULL_TX_DESC_WB 0x01010000 /* GRAN=1, WTHRESH=1 */ +#define E1000_TXDCTL_COUNT_DESC 0x00400000 /* Enable the counting of desc. + still to be processed. */ /* Transmit Configuration Word */ #define E1000_TXCW_FD 0x00000020 /* TXCW full duplex */ @@ -1387,12 +1773,16 @@ struct e1000_hw { #define E1000_TCTL_PBE 0x00800000 /* Packet Burst Enable */ #define E1000_TCTL_RTLC 0x01000000 /* Re-transmit on late collision */ #define E1000_TCTL_NRTU 0x02000000 /* No Re-transmit on underrun */ +#define E1000_TCTL_MULR 0x10000000 /* Multiple request support */ /* Receive Checksum Control */ #define E1000_RXCSUM_PCSS_MASK 0x000000FF /* Packet Checksum Start */ #define E1000_RXCSUM_IPOFL 0x00000100 /* IPv4 checksum offload */ #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ #define E1000_RXCSUM_IPV6OFL 0x00000400 /* IPv6 checksum offload */ +#define E1000_RXCSUM_IPPCSE 0x00001000 /* IP payload checksum enable */ +#define E1000_RXCSUM_PCSD 0x00002000 /* packet checksum disabled */ + /* Definitions for power management and wakeup registers */ /* Wake Up Control */ @@ -1411,6 +1801,7 @@ struct e1000_hw { #define E1000_WUFC_ARP 0x00000020 /* ARP Request Packet Wakeup Enable */ #define E1000_WUFC_IPV4 0x00000040 /* Directed IPv4 Packet Wakeup Enable */ #define E1000_WUFC_IPV6 0x00000080 /* Directed IPv6 Packet Wakeup Enable */ +#define E1000_WUFC_IGNORE_TCO 0x00008000 /* Ignore WakeOn TCO packets */ #define E1000_WUFC_FLX0 0x00010000 /* Flexible Filter 0 Enable */ #define E1000_WUFC_FLX1 0x00020000 /* Flexible Filter 1 Enable */ #define E1000_WUFC_FLX2 0x00040000 /* Flexible Filter 2 Enable */ @@ -1446,13 +1837,19 @@ struct e1000_hw { #define E1000_MANC_ARP_EN 0x00002000 /* Enable ARP Request Filtering */ #define E1000_MANC_NEIGHBOR_EN 0x00004000 /* Enable Neighbor Discovery * Filtering */ +#define E1000_MANC_ARP_RES_EN 0x00008000 /* Enable ARP response Filtering */ #define E1000_MANC_TCO_RESET 0x00010000 /* TCO Reset Occurred */ #define E1000_MANC_RCV_TCO_EN 0x00020000 /* Receive TCO Packets Enabled */ #define E1000_MANC_REPORT_STATUS 0x00040000 /* Status Reporting Enabled */ +#define E1000_MANC_BLK_PHY_RST_ON_IDE 0x00040000 /* Block phy resets */ #define E1000_MANC_EN_MAC_ADDR_FILTER 0x00100000 /* Enable MAC address * filtering */ #define E1000_MANC_EN_MNG2HOST 0x00200000 /* Enable MNG packets to host * memory */ +#define E1000_MANC_EN_IP_ADDR_FILTER 0x00400000 /* Enable IP address + * filtering */ +#define E1000_MANC_EN_XSUM_FILTER 0x00800000 /* Enable checksum filtering */ +#define E1000_MANC_BR_EN 0x01000000 /* Enable broadcast filtering */ #define E1000_MANC_SMB_REQ 0x01000000 /* SMBus Request */ #define E1000_MANC_SMB_GNT 0x02000000 /* SMBus Grant */ #define E1000_MANC_SMB_CLK_IN 0x04000000 /* SMBus Clock In */ @@ -1463,11 +1860,97 @@ struct e1000_hw { #define E1000_MANC_SMB_DATA_OUT_SHIFT 28 /* SMBus Data Out Shift */ #define E1000_MANC_SMB_CLK_OUT_SHIFT 29 /* SMBus Clock Out Shift */ +/* SW Semaphore Register */ +#define E1000_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */ +#define E1000_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */ +#define E1000_SWSM_WMNG 0x00000004 /* Wake MNG Clock */ +#define E1000_SWSM_DRV_LOAD 0x00000008 /* Driver Loaded Bit */ + +/* FW Semaphore Register */ +#define E1000_FWSM_MODE_MASK 0x0000000E /* FW mode */ +#define E1000_FWSM_MODE_SHIFT 1 +#define E1000_FWSM_FW_VALID 0x00008000 /* FW established a valid mode */ + +/* FFLT Debug Register */ +#define E1000_FFLT_DBG_INVC 0x00100000 /* Invalid /C/ code handling */ + +typedef enum { + e1000_mng_mode_none = 0, + e1000_mng_mode_asf, + e1000_mng_mode_pt, + e1000_mng_mode_ipmi, + e1000_mng_mode_host_interface_only +} e1000_mng_mode; + +/* Host Inteface Control Register */ +#define E1000_HICR_EN 0x00000001 /* Enable Bit - RO */ +#define E1000_HICR_C 0x00000002 /* Driver sets this bit when done + * to put command in RAM */ +#define E1000_HICR_SV 0x00000004 /* Status Validity */ +#define E1000_HICR_FWR 0x00000080 /* FW reset. Set by the Host */ + +/* Host Interface Command Interface - Address range 0x8800-0x8EFF */ +#define E1000_HI_MAX_DATA_LENGTH 252 /* Host Interface data length */ +#define E1000_HI_MAX_BLOCK_BYTE_LENGTH 1792 /* Number of bytes in range */ +#define E1000_HI_MAX_BLOCK_DWORD_LENGTH 448 /* Number of dwords in range */ +#define E1000_HI_COMMAND_TIMEOUT 500 /* Time in ms to process HI command */ + +struct e1000_host_command_header { + uint8_t command_id; + uint8_t command_length; + uint8_t command_options; /* I/F bits for command, status for return */ + uint8_t checksum; +}; +struct e1000_host_command_info { + struct e1000_host_command_header command_header; /* Command Head/Command Result Head has 4 bytes */ + uint8_t command_data[E1000_HI_MAX_DATA_LENGTH]; /* Command data can length 0..252 */ +}; + +/* Host SMB register #0 */ +#define E1000_HSMC0R_CLKIN 0x00000001 /* SMB Clock in */ +#define E1000_HSMC0R_DATAIN 0x00000002 /* SMB Data in */ +#define E1000_HSMC0R_DATAOUT 0x00000004 /* SMB Data out */ +#define E1000_HSMC0R_CLKOUT 0x00000008 /* SMB Clock out */ + +/* Host SMB register #1 */ +#define E1000_HSMC1R_CLKIN E1000_HSMC0R_CLKIN +#define E1000_HSMC1R_DATAIN E1000_HSMC0R_DATAIN +#define E1000_HSMC1R_DATAOUT E1000_HSMC0R_DATAOUT +#define E1000_HSMC1R_CLKOUT E1000_HSMC0R_CLKOUT + +/* FW Status Register */ +#define E1000_FWSTS_FWS_MASK 0x000000FF /* FW Status */ + /* Wake Up Packet Length */ #define E1000_WUPL_LENGTH_MASK 0x0FFF /* Only the lower 12 bits are valid */ #define E1000_MDALIGN 4096 +#define E1000_GCR_BEM32 0x00400000 +/* Function Active and Power State to MNG */ +#define E1000_FACTPS_FUNC0_POWER_STATE_MASK 0x00000003 +#define E1000_FACTPS_LAN0_VALID 0x00000004 +#define E1000_FACTPS_FUNC0_AUX_EN 0x00000008 +#define E1000_FACTPS_FUNC1_POWER_STATE_MASK 0x000000C0 +#define E1000_FACTPS_FUNC1_POWER_STATE_SHIFT 6 +#define E1000_FACTPS_LAN1_VALID 0x00000100 +#define E1000_FACTPS_FUNC1_AUX_EN 0x00000200 +#define E1000_FACTPS_FUNC2_POWER_STATE_MASK 0x00003000 +#define E1000_FACTPS_FUNC2_POWER_STATE_SHIFT 12 +#define E1000_FACTPS_IDE_ENABLE 0x00004000 +#define E1000_FACTPS_FUNC2_AUX_EN 0x00008000 +#define E1000_FACTPS_FUNC3_POWER_STATE_MASK 0x000C0000 +#define E1000_FACTPS_FUNC3_POWER_STATE_SHIFT 18 +#define E1000_FACTPS_SP_ENABLE 0x00100000 +#define E1000_FACTPS_FUNC3_AUX_EN 0x00200000 +#define E1000_FACTPS_FUNC4_POWER_STATE_MASK 0x03000000 +#define E1000_FACTPS_FUNC4_POWER_STATE_SHIFT 24 +#define E1000_FACTPS_IPMI_ENABLE 0x04000000 +#define E1000_FACTPS_FUNC4_AUX_EN 0x08000000 +#define E1000_FACTPS_MNGCG 0x20000000 +#define E1000_FACTPS_LAN_FUNC_SEL 0x40000000 +#define E1000_FACTPS_PM_STATE_CHANGED 0x80000000 + /* EEPROM Commands - Microwire */ #define EEPROM_READ_OPCODE_MICROWIRE 0x6 /* EEPROM read opcode */ #define EEPROM_WRITE_OPCODE_MICROWIRE 0x5 /* EEPROM write opcode */ @@ -1477,22 +1960,20 @@ struct e1000_hw { /* EEPROM Commands - SPI */ #define EEPROM_MAX_RETRY_SPI 5000 /* Max wait of 5ms, for RDY signal */ -#define EEPROM_READ_OPCODE_SPI 0x3 /* EEPROM read opcode */ -#define EEPROM_WRITE_OPCODE_SPI 0x2 /* EEPROM write opcode */ -#define EEPROM_A8_OPCODE_SPI 0x8 /* opcode bit-3 = address bit-8 */ -#define EEPROM_WREN_OPCODE_SPI 0x6 /* EEPROM set Write Enable latch */ -#define EEPROM_WRDI_OPCODE_SPI 0x4 /* EEPROM reset Write Enable latch */ -#define EEPROM_RDSR_OPCODE_SPI 0x5 /* EEPROM read Status register */ -#define EEPROM_WRSR_OPCODE_SPI 0x1 /* EEPROM write Status register */ +#define EEPROM_READ_OPCODE_SPI 0x03 /* EEPROM read opcode */ +#define EEPROM_WRITE_OPCODE_SPI 0x02 /* EEPROM write opcode */ +#define EEPROM_A8_OPCODE_SPI 0x08 /* opcode bit-3 = address bit-8 */ +#define EEPROM_WREN_OPCODE_SPI 0x06 /* EEPROM set Write Enable latch */ +#define EEPROM_WRDI_OPCODE_SPI 0x04 /* EEPROM reset Write Enable latch */ +#define EEPROM_RDSR_OPCODE_SPI 0x05 /* EEPROM read Status register */ +#define EEPROM_WRSR_OPCODE_SPI 0x01 /* EEPROM write Status register */ +#define EEPROM_ERASE4K_OPCODE_SPI 0x20 /* EEPROM ERASE 4KB */ +#define EEPROM_ERASE64K_OPCODE_SPI 0xD8 /* EEPROM ERASE 64KB */ +#define EEPROM_ERASE256_OPCODE_SPI 0xDB /* EEPROM ERASE 256B */ /* EEPROM Size definitions */ -#define EEPROM_SIZE_16KB 0x1800 -#define EEPROM_SIZE_8KB 0x1400 -#define EEPROM_SIZE_4KB 0x1000 -#define EEPROM_SIZE_2KB 0x0C00 -#define EEPROM_SIZE_1KB 0x0800 -#define EEPROM_SIZE_512B 0x0400 -#define EEPROM_SIZE_128B 0x0000 +#define EEPROM_WORD_SIZE_SHIFT 6 +#define EEPROM_SIZE_SHIFT 10 #define EEPROM_SIZE_MASK 0x1C00 /* EEPROM Word Offsets */ @@ -1606,7 +2087,22 @@ struct e1000_hw { #define IFS_MIN 40 #define IFS_RATIO 4 +/* Extended Configuration Control and Size */ +#define E1000_EXTCNF_CTRL_PCIE_WRITE_ENABLE 0x00000001 +#define E1000_EXTCNF_CTRL_PHY_WRITE_ENABLE 0x00000002 +#define E1000_EXTCNF_CTRL_D_UD_ENABLE 0x00000004 +#define E1000_EXTCNF_CTRL_D_UD_LATENCY 0x00000008 +#define E1000_EXTCNF_CTRL_D_UD_OWNER 0x00000010 +#define E1000_EXTCNF_CTRL_MDIO_SW_OWNERSHIP 0x00000020 +#define E1000_EXTCNF_CTRL_MDIO_HW_OWNERSHIP 0x00000040 +#define E1000_EXTCNF_CTRL_EXT_CNF_POINTER 0x1FFF0000 + +#define E1000_EXTCNF_SIZE_EXT_PHY_LENGTH 0x000000FF +#define E1000_EXTCNF_SIZE_EXT_DOCK_LENGTH 0x0000FF00 +#define E1000_EXTCNF_SIZE_EXT_PCIE_LENGTH 0x00FF0000 + /* PBA constants */ +#define E1000_PBA_12K 0x000C /* 12KB, default Rx allocation */ #define E1000_PBA_16K 0x0010 /* 16KB, default TX allocation */ #define E1000_PBA_22K 0x0016 #define E1000_PBA_24K 0x0018 @@ -1663,6 +2159,13 @@ struct e1000_hw { /* Number of milliseconds we wait for auto-negotiation to complete */ #define LINK_UP_TIMEOUT 500 +/* Number of 100 microseconds we wait for PCI Express master disable */ +#define MASTER_DISABLE_TIMEOUT 800 +/* Number of milliseconds we wait for Eeprom auto read bit done after MAC reset */ +#define AUTO_READ_DONE_TIMEOUT 10 +/* Number of milliseconds we wait for PHY configuration done after MAC reset */ +#define PHY_CFG_TIMEOUT 40 + #define E1000_TX_BUFFER_SIZE ((uint32_t)1514) /* The carrier extension symbol, as received by the NIC. */ @@ -1763,6 +2266,7 @@ struct e1000_hw { #define IGP01E1000_PHY_LINK_HEALTH 0x13 /* PHY Link Health Register */ #define IGP01E1000_GMII_FIFO 0x14 /* GMII FIFO Register */ #define IGP01E1000_PHY_CHANNEL_QUALITY 0x15 /* PHY Channel Quality Register */ +#define IGP02E1000_PHY_POWER_MGMT 0x19 #define IGP01E1000_PHY_PAGE_SELECT 0x1F /* PHY Page Select Core Register */ /* IGP01E1000 AGC Registers - stores the cable length values*/ @@ -1771,12 +2275,20 @@ struct e1000_hw { #define IGP01E1000_PHY_AGC_C 0x1472 #define IGP01E1000_PHY_AGC_D 0x1872 +/* IGP02E1000 AGC Registers for cable length values */ +#define IGP02E1000_PHY_AGC_A 0x11B1 +#define IGP02E1000_PHY_AGC_B 0x12B1 +#define IGP02E1000_PHY_AGC_C 0x14B1 +#define IGP02E1000_PHY_AGC_D 0x18B1 + /* IGP01E1000 DSP Reset Register */ #define IGP01E1000_PHY_DSP_RESET 0x1F33 #define IGP01E1000_PHY_DSP_SET 0x1F71 #define IGP01E1000_PHY_DSP_FFE 0x1F35 #define IGP01E1000_PHY_CHANNEL_NUM 4 +#define IGP02E1000_PHY_CHANNEL_NUM 4 + #define IGP01E1000_PHY_AGC_PARAM_A 0x1171 #define IGP01E1000_PHY_AGC_PARAM_B 0x1271 #define IGP01E1000_PHY_AGC_PARAM_C 0x1471 @@ -2060,20 +2572,30 @@ struct e1000_hw { #define IGP01E1000_MSE_CHANNEL_B 0x0F00 #define IGP01E1000_MSE_CHANNEL_A 0xF000 +#define IGP02E1000_PM_SPD 0x0001 /* Smart Power Down */ +#define IGP02E1000_PM_D3_LPLU 0x0004 /* Enable LPLU in non-D0a modes */ +#define IGP02E1000_PM_D0_LPLU 0x0002 /* Enable LPLU in D0a mode */ + /* IGP01E1000 DSP reset macros */ #define DSP_RESET_ENABLE 0x0 #define DSP_RESET_DISABLE 0x2 #define E1000_MAX_DSP_RESETS 10 -/* IGP01E1000 AGC Registers */ +/* IGP01E1000 & IGP02E1000 AGC Registers */ #define IGP01E1000_AGC_LENGTH_SHIFT 7 /* Coarse - 13:11, Fine - 10:7 */ +#define IGP02E1000_AGC_LENGTH_SHIFT 9 /* Coarse - 15:13, Fine - 12:9 */ + +/* IGP02E1000 AGC Register Length 9-bit mask */ +#define IGP02E1000_AGC_LENGTH_MASK 0x7F /* 7 bits (3 Coarse + 4 Fine) --> 128 optional values */ #define IGP01E1000_AGC_LENGTH_TABLE_SIZE 128 +#define IGP02E1000_AGC_LENGTH_TABLE_SIZE 128 -/* The precision of the length is +/- 10 meters */ +/* The precision error of the cable length is +/- 10 meters */ #define IGP01E1000_AGC_RANGE 10 +#define IGP02E1000_AGC_RANGE 10 /* IGP01E1000 PCS Initialization register */ /* bits 3:6 in the PCS registers stores the channels polarity */ @@ -2113,6 +2635,8 @@ struct e1000_hw { #define M88E1000_12_PHY_ID M88E1000_E_PHY_ID #define M88E1000_14_PHY_ID M88E1000_E_PHY_ID #define M88E1011_I_REV_4 0x04 +#define M88E1111_I_PHY_ID 0x01410CC0 +#define L1LXT971A_PHY_ID 0x001378E0 /* Miscellaneous PHY bit definitions. */ #define PHY_PREAMBLE 0xFFFFFFFF diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 82549a6fcfb..137226d98d4 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -29,33 +29,9 @@ #include "e1000.h" /* Change Log - * 5.3.12 6/7/04 - * - kcompat NETIF_MSG for older kernels (2.4.9) <sean.p.mcdermott@intel.com> - * - if_mii support and associated kcompat for older kernels - * - More errlogging support from Jon Mason <jonmason@us.ibm.com> - * - Fix TSO issues on PPC64 machines -- Jon Mason <jonmason@us.ibm.com> - * - * 5.7.1 12/16/04 - * - Resurrect 82547EI/GI related fix in e1000_intr to avoid deadlocks. This - * fix was removed as it caused system instability. The suspected cause of - * this is the called to e1000_irq_disable in e1000_intr. Inlined the - * required piece of e1000_irq_disable into e1000_intr - Anton Blanchard - * 5.7.0 12/10/04 - * - include fix to the condition that determines when to quit NAPI - Robert Olsson - * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down - * 5.6.5 11/01/04 - * - Enabling NETIF_F_SG without checksum offload is illegal - - John Mason <jdmason@us.ibm.com> - * 5.6.3 10/26/04 - * - Remove redundant initialization - Jamal Hadi - * - Reset buffer_info->dma in tx resource cleanup logic - * 5.6.2 10/12/04 - * - Avoid filling tx_ring completely - shemminger@osdl.org - * - Replace schedule_timeout() with msleep()/msleep_interruptible() - - * nacc@us.ibm.com - * - Sparse cleanup - shemminger@osdl.org - * - Fix tx resource cleanup logic - * - LLTX support - ak@suse.de and hadi@cyberus.ca + * 6.0.44+ 2/15/05 + * o applied Anton's patch to resolve tx hang in hardware + * o Applied Andrew Mortons patch - e1000 stops working after resume */ char e1000_driver_name[] = "e1000"; @@ -65,7 +41,7 @@ char e1000_driver_string[] = "Intel(R) PRO/1000 Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "5.7.6-k2"DRIVERNAPI +#define DRV_VERSION "6.0.54-k2"DRIVERNAPI char e1000_driver_version[] = DRV_VERSION; char e1000_copyright[] = "Copyright (c) 1999-2004 Intel Corporation."; @@ -96,6 +72,7 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x1017), INTEL_E1000_ETHERNET_DEVICE(0x1018), INTEL_E1000_ETHERNET_DEVICE(0x1019), + INTEL_E1000_ETHERNET_DEVICE(0x101A), INTEL_E1000_ETHERNET_DEVICE(0x101D), INTEL_E1000_ETHERNET_DEVICE(0x101E), INTEL_E1000_ETHERNET_DEVICE(0x1026), @@ -110,6 +87,9 @@ static struct pci_device_id e1000_pci_tbl[] = { INTEL_E1000_ETHERNET_DEVICE(0x107B), INTEL_E1000_ETHERNET_DEVICE(0x107C), INTEL_E1000_ETHERNET_DEVICE(0x108A), + INTEL_E1000_ETHERNET_DEVICE(0x108B), + INTEL_E1000_ETHERNET_DEVICE(0x108C), + INTEL_E1000_ETHERNET_DEVICE(0x1099), /* required last entry */ {0,} }; @@ -155,10 +135,14 @@ static boolean_t e1000_clean_tx_irq(struct e1000_adapter *adapter); static int e1000_clean(struct net_device *netdev, int *budget); static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter, int *work_done, int work_to_do); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, + int *work_done, int work_to_do); #else static boolean_t e1000_clean_rx_irq(struct e1000_adapter *adapter); +static boolean_t e1000_clean_rx_irq_ps(struct e1000_adapter *adapter); #endif static void e1000_alloc_rx_buffers(struct e1000_adapter *adapter); +static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter); static int e1000_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd); @@ -286,7 +270,29 @@ e1000_irq_enable(struct e1000_adapter *adapter) E1000_WRITE_FLUSH(&adapter->hw); } } - +void +e1000_update_mng_vlan(struct e1000_adapter *adapter) +{ + struct net_device *netdev = adapter->netdev; + uint16_t vid = adapter->hw.mng_cookie.vlan_id; + uint16_t old_vid = adapter->mng_vlan_id; + if(adapter->vlgrp) { + if(!adapter->vlgrp->vlan_devices[vid]) { + if(adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) { + e1000_vlan_rx_add_vid(netdev, vid); + adapter->mng_vlan_id = vid; + } else + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + + if((old_vid != (uint16_t)E1000_MNG_VLAN_NONE) && + (vid != old_vid) && + !adapter->vlgrp->vlan_devices[old_vid]) + e1000_vlan_rx_kill_vid(netdev, old_vid); + } + } +} + int e1000_up(struct e1000_adapter *adapter) { @@ -310,19 +316,33 @@ e1000_up(struct e1000_adapter *adapter) e1000_configure_tx(adapter); e1000_setup_rctl(adapter); e1000_configure_rx(adapter); - e1000_alloc_rx_buffers(adapter); + adapter->alloc_rx_buf(adapter); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->have_msi = TRUE; + if((err = pci_enable_msi(adapter->pdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate MSI interrupt Error: %d\n", err); + adapter->have_msi = FALSE; + } + } +#endif if((err = request_irq(adapter->pdev->irq, &e1000_intr, SA_SHIRQ | SA_SAMPLE_RANDOM, - netdev->name, netdev))) + netdev->name, netdev))) { + DPRINTK(PROBE, ERR, + "Unable to allocate interrupt Error: %d\n", err); return err; + } mod_timer(&adapter->watchdog_timer, jiffies); - e1000_irq_enable(adapter); #ifdef CONFIG_E1000_NAPI netif_poll_enable(netdev); #endif + e1000_irq_enable(adapter); + return 0; } @@ -333,6 +353,11 @@ e1000_down(struct e1000_adapter *adapter) e1000_irq_disable(adapter); free_irq(adapter->pdev->irq, netdev); +#ifdef CONFIG_PCI_MSI + if(adapter->hw.mac_type > e1000_82547_rev_2 && + adapter->have_msi == TRUE) + pci_disable_msi(adapter->pdev); +#endif del_timer_sync(&adapter->tx_fifo_stall_timer); del_timer_sync(&adapter->watchdog_timer); del_timer_sync(&adapter->phy_info_timer); @@ -350,62 +375,93 @@ e1000_down(struct e1000_adapter *adapter) e1000_clean_rx_ring(adapter); /* If WoL is not enabled + * and management mode is not IAMT * Power down the PHY so no link is implied when interface is down */ - if(!adapter->wol && adapter->hw.media_type == e1000_media_type_copper) { + if(!adapter->wol && adapter->hw.mac_type >= e1000_82540 && + adapter->hw.media_type == e1000_media_type_copper && + !e1000_check_mng_mode(&adapter->hw) && + !(E1000_READ_REG(&adapter->hw, MANC) & E1000_MANC_SMBUS_EN)) { uint16_t mii_reg; e1000_read_phy_reg(&adapter->hw, PHY_CTRL, &mii_reg); mii_reg |= MII_CR_POWER_DOWN; e1000_write_phy_reg(&adapter->hw, PHY_CTRL, mii_reg); + mdelay(1); } } void e1000_reset(struct e1000_adapter *adapter) { - uint32_t pba; + struct net_device *netdev = adapter->netdev; + uint32_t pba, manc; + uint16_t fc_high_water_mark = E1000_FC_HIGH_DIFF; + uint16_t fc_low_water_mark = E1000_FC_LOW_DIFF; /* Repartition Pba for greater than 9k mtu * To take effect CTRL.RST is required. */ - if(adapter->hw.mac_type < e1000_82547) { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_40K; - else - pba = E1000_PBA_48K; - } else { - if(adapter->rx_buffer_len > E1000_RXBUFFER_8192) - pba = E1000_PBA_22K; - else - pba = E1000_PBA_30K; + switch (adapter->hw.mac_type) { + case e1000_82547: + case e1000_82547_rev_2: + pba = E1000_PBA_30K; + break; + case e1000_82573: + pba = E1000_PBA_12K; + break; + default: + pba = E1000_PBA_48K; + break; + } + + if((adapter->hw.mac_type != e1000_82573) && + (adapter->rx_buffer_len > E1000_RXBUFFER_8192)) { + pba -= 8; /* allocate more FIFO for Tx */ + /* send an XOFF when there is enough space in the + * Rx FIFO to hold one extra full size Rx packet + */ + fc_high_water_mark = netdev->mtu + ENET_HEADER_SIZE + + ETHERNET_FCS_SIZE + 1; + fc_low_water_mark = fc_high_water_mark + 8; + } + + + if(adapter->hw.mac_type == e1000_82547) { adapter->tx_fifo_head = 0; adapter->tx_head_addr = pba << E1000_TX_HEAD_ADDR_SHIFT; adapter->tx_fifo_size = (E1000_PBA_40K - pba) << E1000_PBA_BYTES_SHIFT; atomic_set(&adapter->tx_fifo_stall, 0); } + E1000_WRITE_REG(&adapter->hw, PBA, pba); /* flow control settings */ adapter->hw.fc_high_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_HIGH_DIFF; + fc_high_water_mark; adapter->hw.fc_low_water = (pba << E1000_PBA_BYTES_SHIFT) - - E1000_FC_LOW_DIFF; + fc_low_water_mark; adapter->hw.fc_pause_time = E1000_FC_PAUSE_TIME; adapter->hw.fc_send_xon = 1; adapter->hw.fc = adapter->hw.original_fc; + /* Allow time for pending master requests to run */ e1000_reset_hw(&adapter->hw); if(adapter->hw.mac_type >= e1000_82544) E1000_WRITE_REG(&adapter->hw, WUC, 0); if(e1000_init_hw(&adapter->hw)) DPRINTK(PROBE, ERR, "Hardware Error\n"); - + e1000_update_mng_vlan(adapter); /* Enable h/w to recognize an 802.1Q VLAN Ethernet packet */ E1000_WRITE_REG(&adapter->hw, VET, ETHERNET_IEEE_VLAN_TYPE); e1000_reset_adaptive(&adapter->hw); e1000_phy_get_info(&adapter->hw, &adapter->phy_info); + if (adapter->en_mng_pt) { + manc = E1000_READ_REG(&adapter->hw, MANC); + manc |= (E1000_MANC_ARP_EN | E1000_MANC_EN_MNG2HOST); + E1000_WRITE_REG(&adapter->hw, MANC, manc); + } } /** @@ -426,15 +482,13 @@ e1000_probe(struct pci_dev *pdev, { struct net_device *netdev; struct e1000_adapter *adapter; + unsigned long mmio_start, mmio_len; + uint32_t swsm; + static int cards_found = 0; - unsigned long mmio_start; - int mmio_len; - int pci_using_dac; - int i; - int err; + int i, err, pci_using_dac; uint16_t eeprom_data; uint16_t eeprom_apme_mask = E1000_EEPROM_APME; - if((err = pci_enable_device(pdev))) return err; @@ -521,6 +575,9 @@ e1000_probe(struct pci_dev *pdev, if((err = e1000_sw_init(adapter))) goto err_sw_init; + if((err = e1000_check_phy_reset_block(&adapter->hw))) + DPRINTK(PROBE, INFO, "PHY reset is blocked due to SOL/IDER session.\n"); + if(adapter->hw.mac_type >= e1000_82543) { netdev->features = NETIF_F_SG | NETIF_F_HW_CSUM | @@ -533,6 +590,11 @@ e1000_probe(struct pci_dev *pdev, if((adapter->hw.mac_type >= e1000_82544) && (adapter->hw.mac_type != e1000_82547)) netdev->features |= NETIF_F_TSO; + +#ifdef NETIF_F_TSO_IPV6 + if(adapter->hw.mac_type > e1000_82547_rev_2) + netdev->features |= NETIF_F_TSO_IPV6; +#endif #endif if(pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -540,6 +602,8 @@ e1000_probe(struct pci_dev *pdev, /* hard_start_xmit is safe against parallel locking */ netdev->features |= NETIF_F_LLTX; + adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw); + /* before reading the EEPROM, reset the controller to * put the device in a known good starting state */ @@ -555,7 +619,7 @@ e1000_probe(struct pci_dev *pdev, /* copy the MAC address out of the EEPROM */ - if (e1000_read_mac_addr(&adapter->hw)) + if(e1000_read_mac_addr(&adapter->hw)) DPRINTK(PROBE, ERR, "EEPROM Read Error\n"); memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len); @@ -629,6 +693,17 @@ e1000_probe(struct pci_dev *pdev, /* reset the hardware with the new settings */ e1000_reset(adapter); + /* Let firmware know the driver has taken over */ + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + strcpy(netdev->name, "eth%d"); if((err = register_netdev(netdev))) goto err_register; @@ -664,7 +739,7 @@ e1000_remove(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc; + uint32_t manc, swsm; flush_scheduled_work(); @@ -677,9 +752,21 @@ e1000_remove(struct pci_dev *pdev) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + + default: + break; + } + unregister_netdev(netdev); - e1000_phy_hw_reset(&adapter->hw); + if(!e1000_check_phy_reset_block(&adapter->hw)) + e1000_phy_hw_reset(&adapter->hw); iounmap(adapter->hw.hw_addr); pci_release_regions(pdev); @@ -717,6 +804,7 @@ e1000_sw_init(struct e1000_adapter *adapter) pci_read_config_word(pdev, PCI_COMMAND, &hw->pci_cmd_word); adapter->rx_buffer_len = E1000_RXBUFFER_2048; + adapter->rx_ps_bsize0 = E1000_RXBUFFER_256; hw->max_frame_size = netdev->mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; hw->min_frame_size = MINIMUM_ETHERNET_FRAME_SIZE; @@ -730,7 +818,10 @@ e1000_sw_init(struct e1000_adapter *adapter) /* initialize eeprom parameters */ - e1000_init_eeprom_params(hw); + if(e1000_init_eeprom_params(hw)) { + E1000_ERR("EEPROM initialization failed\n"); + return -EIO; + } switch(hw->mac_type) { default: @@ -795,6 +886,11 @@ e1000_open(struct net_device *netdev) if((err = e1000_up(adapter))) goto err_up; + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_update_mng_vlan(adapter); + } return E1000_SUCCESS; @@ -830,14 +926,18 @@ e1000_close(struct net_device *netdev) e1000_free_tx_resources(adapter); e1000_free_rx_resources(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + } return 0; } /** * e1000_check_64k_bound - check that memory doesn't cross 64kB boundary * @adapter: address of board private structure - * @begin: address of beginning of memory - * @end: address of end of memory + * @start: address of beginning of memory + * @len: length of memory **/ static inline boolean_t e1000_check_64k_bound(struct e1000_adapter *adapter, @@ -846,12 +946,10 @@ e1000_check_64k_bound(struct e1000_adapter *adapter, unsigned long begin = (unsigned long) start; unsigned long end = begin + len; - /* first rev 82545 and 82546 need to not allow any memory - * write location to cross a 64k boundary due to errata 23 */ + /* First rev 82545 and 82546 need to not allow any memory + * write location to cross 64k boundary due to errata 23 */ if (adapter->hw.mac_type == e1000_82545 || - adapter->hw.mac_type == e1000_82546 ) { - - /* check buffer doesn't cross 64kB */ + adapter->hw.mac_type == e1000_82546) { return ((begin ^ (end - 1)) >> 16) != 0 ? FALSE : TRUE; } @@ -875,8 +973,8 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) size = sizeof(struct e1000_buffer) * txdr->count; txdr->buffer_info = vmalloc(size); if(!txdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } memset(txdr->buffer_info, 0, size); @@ -889,38 +987,38 @@ e1000_setup_tx_resources(struct e1000_adapter *adapter) txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); if(!txdr->desc) { setup_tx_desc_die: - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Transmit descriptor ring\n"); vfree(txdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the transmit descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { void *olddesc = txdr->desc; dma_addr_t olddma = txdr->dma; - DPRINTK(TX_ERR,ERR,"txdr align check failed: %u bytes at %p\n", - txdr->size, txdr->desc); - /* try again, without freeing the previous */ + DPRINTK(TX_ERR, ERR, "txdr align check failed: %u bytes " + "at %p\n", txdr->size, txdr->desc); + /* Try again, without freeing the previous */ txdr->desc = pci_alloc_consistent(pdev, txdr->size, &txdr->dma); - /* failed allocation, critial failure */ if(!txdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); goto setup_tx_desc_die; } if (!e1000_check_64k_bound(adapter, txdr->desc, txdr->size)) { /* give up */ - pci_free_consistent(pdev, txdr->size, - txdr->desc, txdr->dma); + pci_free_consistent(pdev, txdr->size, txdr->desc, + txdr->dma); pci_free_consistent(pdev, txdr->size, olddesc, olddma); DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the Transmit" - " descriptor ring\n"); + "Unable to allocate aligned memory " + "for the transmit descriptor ring\n"); vfree(txdr->buffer_info); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, txdr->size, olddesc, olddma); } } @@ -1022,59 +1120,88 @@ e1000_setup_rx_resources(struct e1000_adapter *adapter) { struct e1000_desc_ring *rxdr = &adapter->rx_ring; struct pci_dev *pdev = adapter->pdev; - int size; + int size, desc_len; size = sizeof(struct e1000_buffer) * rxdr->count; rxdr->buffer_info = vmalloc(size); if(!rxdr->buffer_info) { - DPRINTK(PROBE, ERR, - "Unable to Allocate Memory for the Recieve descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } memset(rxdr->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rxdr->count; + rxdr->ps_page = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page) { + vfree(rxdr->buffer_info); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page, 0, size); + + size = sizeof(struct e1000_ps_page_dma) * rxdr->count; + rxdr->ps_page_dma = kmalloc(size, GFP_KERNEL); + if(!rxdr->ps_page_dma) { + vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); + return -ENOMEM; + } + memset(rxdr->ps_page_dma, 0, size); + + if(adapter->hw.mac_type <= e1000_82547_rev_2) + desc_len = sizeof(struct e1000_rx_desc); + else + desc_len = sizeof(union e1000_rx_desc_packet_split); + /* Round up to nearest 4K */ - rxdr->size = rxdr->count * sizeof(struct e1000_rx_desc); + rxdr->size = rxdr->count * desc_len; E1000_ROUNDUP(rxdr->size, 4096); rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); if(!rxdr->desc) { setup_rx_desc_die: - DPRINTK(PROBE, ERR, - "Unble to Allocate Memory for the Recieve descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); + DPRINTK(PROBE, ERR, + "Unable to allocate memory for the receive descriptor ring\n"); return -ENOMEM; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { void *olddesc = rxdr->desc; dma_addr_t olddma = rxdr->dma; - DPRINTK(RX_ERR,ERR, - "rxdr align check failed: %u bytes at %p\n", - rxdr->size, rxdr->desc); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "rxdr align check failed: %u bytes " + "at %p\n", rxdr->size, rxdr->desc); + /* Try again, without freeing the previous */ rxdr->desc = pci_alloc_consistent(pdev, rxdr->size, &rxdr->dma); - /* failed allocation, critial failure */ if(!rxdr->desc) { + /* Failed allocation, critical failure */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); goto setup_rx_desc_die; } if (!e1000_check_64k_bound(adapter, rxdr->desc, rxdr->size)) { /* give up */ - pci_free_consistent(pdev, rxdr->size, - rxdr->desc, rxdr->dma); + pci_free_consistent(pdev, rxdr->size, rxdr->desc, + rxdr->dma); pci_free_consistent(pdev, rxdr->size, olddesc, olddma); - DPRINTK(PROBE, ERR, - "Unable to Allocate aligned Memory for the" - " Receive descriptor ring\n"); + DPRINTK(PROBE, ERR, + "Unable to allocate aligned memory " + "for the receive descriptor ring\n"); vfree(rxdr->buffer_info); + kfree(rxdr->ps_page); + kfree(rxdr->ps_page_dma); return -ENOMEM; } else { - /* free old, move on with the new one since its okay */ + /* Free old allocation, new allocation was successful */ pci_free_consistent(pdev, rxdr->size, olddesc, olddma); } } @@ -1087,14 +1214,15 @@ setup_rx_desc_die: } /** - * e1000_setup_rctl - configure the receive control register + * e1000_setup_rctl - configure the receive control registers * @adapter: Board private structure **/ static void e1000_setup_rctl(struct e1000_adapter *adapter) { - uint32_t rctl; + uint32_t rctl, rfctl; + uint32_t psrctl = 0; rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1109,24 +1237,69 @@ e1000_setup_rctl(struct e1000_adapter *adapter) else rctl &= ~E1000_RCTL_SBP; + if (adapter->netdev->mtu <= ETH_DATA_LEN) + rctl &= ~E1000_RCTL_LPE; + else + rctl |= E1000_RCTL_LPE; + /* Setup buffer sizes */ - rctl &= ~(E1000_RCTL_SZ_4096); - rctl |= (E1000_RCTL_BSEX | E1000_RCTL_LPE); - switch (adapter->rx_buffer_len) { - case E1000_RXBUFFER_2048: - default: - rctl |= E1000_RCTL_SZ_2048; - rctl &= ~(E1000_RCTL_BSEX | E1000_RCTL_LPE); - break; - case E1000_RXBUFFER_4096: - rctl |= E1000_RCTL_SZ_4096; - break; - case E1000_RXBUFFER_8192: - rctl |= E1000_RCTL_SZ_8192; - break; - case E1000_RXBUFFER_16384: - rctl |= E1000_RCTL_SZ_16384; - break; + if(adapter->hw.mac_type == e1000_82573) { + /* We can now specify buffers in 1K increments. + * BSIZE and BSEX are ignored in this case. */ + rctl |= adapter->rx_buffer_len << 0x11; + } else { + rctl &= ~E1000_RCTL_SZ_4096; + rctl |= E1000_RCTL_BSEX; + switch (adapter->rx_buffer_len) { + case E1000_RXBUFFER_2048: + default: + rctl |= E1000_RCTL_SZ_2048; + rctl &= ~E1000_RCTL_BSEX; + break; + case E1000_RXBUFFER_4096: + rctl |= E1000_RCTL_SZ_4096; + break; + case E1000_RXBUFFER_8192: + rctl |= E1000_RCTL_SZ_8192; + break; + case E1000_RXBUFFER_16384: + rctl |= E1000_RCTL_SZ_16384; + break; + } + } + +#ifdef CONFIG_E1000_PACKET_SPLIT + /* 82571 and greater support packet-split where the protocol + * header is placed in skb->data and the packet data is + * placed in pages hanging off of skb_shinfo(skb)->nr_frags. + * In the case of a non-split, skb->data is linearly filled, + * followed by the page buffers. Therefore, skb->data is + * sized to hold the largest protocol header. + */ + adapter->rx_ps = (adapter->hw.mac_type > e1000_82547_rev_2) + && (adapter->netdev->mtu + < ((3 * PAGE_SIZE) + adapter->rx_ps_bsize0)); +#endif + if(adapter->rx_ps) { + /* Configure extra packet-split registers */ + rfctl = E1000_READ_REG(&adapter->hw, RFCTL); + rfctl |= E1000_RFCTL_EXTEN; + /* disable IPv6 packet split support */ + rfctl |= E1000_RFCTL_IPV6_DIS; + E1000_WRITE_REG(&adapter->hw, RFCTL, rfctl); + + rctl |= E1000_RCTL_DTYP_PS | E1000_RCTL_SECRC; + + psrctl |= adapter->rx_ps_bsize0 >> + E1000_PSRCTL_BSIZE0_SHIFT; + psrctl |= PAGE_SIZE >> + E1000_PSRCTL_BSIZE1_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE2_SHIFT; + psrctl |= PAGE_SIZE << + E1000_PSRCTL_BSIZE3_SHIFT; + + E1000_WRITE_REG(&adapter->hw, PSRCTL, psrctl); } E1000_WRITE_REG(&adapter->hw, RCTL, rctl); @@ -1143,9 +1316,18 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) { uint64_t rdba = adapter->rx_ring.dma; - uint32_t rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); - uint32_t rctl; - uint32_t rxcsum; + uint32_t rdlen, rctl, rxcsum; + + if(adapter->rx_ps) { + rdlen = adapter->rx_ring.count * + sizeof(union e1000_rx_desc_packet_split); + adapter->clean_rx = e1000_clean_rx_irq_ps; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; + } else { + rdlen = adapter->rx_ring.count * sizeof(struct e1000_rx_desc); + adapter->clean_rx = e1000_clean_rx_irq; + adapter->alloc_rx_buf = e1000_alloc_rx_buffers; + } /* disable receives while setting up the descriptors */ rctl = E1000_READ_REG(&adapter->hw, RCTL); @@ -1172,13 +1354,27 @@ e1000_configure_rx(struct e1000_adapter *adapter) E1000_WRITE_REG(&adapter->hw, RDT, 0); /* Enable 82543 Receive Checksum Offload for TCP and UDP */ - if((adapter->hw.mac_type >= e1000_82543) && - (adapter->rx_csum == TRUE)) { + if(adapter->hw.mac_type >= e1000_82543) { rxcsum = E1000_READ_REG(&adapter->hw, RXCSUM); - rxcsum |= E1000_RXCSUM_TUOFL; + if(adapter->rx_csum == TRUE) { + rxcsum |= E1000_RXCSUM_TUOFL; + + /* Enable 82573 IPv4 payload checksum for UDP fragments + * Must be used in conjunction with packet-split. */ + if((adapter->hw.mac_type > e1000_82547_rev_2) && + (adapter->rx_ps)) { + rxcsum |= E1000_RXCSUM_IPPCSE; + } + } else { + rxcsum &= ~E1000_RXCSUM_TUOFL; + /* don't need to clear IPPCSE as it defaults to 0 */ + } E1000_WRITE_REG(&adapter->hw, RXCSUM, rxcsum); } + if (adapter->hw.mac_type == e1000_82573) + E1000_WRITE_REG(&adapter->hw, ERT, 0x0100); + /* Enable Receives */ E1000_WRITE_REG(&adapter->hw, RCTL, rctl); } @@ -1210,13 +1406,11 @@ static inline void e1000_unmap_and_free_tx_resource(struct e1000_adapter *adapter, struct e1000_buffer *buffer_info) { - struct pci_dev *pdev = adapter->pdev; - if(buffer_info->dma) { - pci_unmap_page(pdev, - buffer_info->dma, - buffer_info->length, - PCI_DMA_TODEVICE); + pci_unmap_page(adapter->pdev, + buffer_info->dma, + buffer_info->length, + PCI_DMA_TODEVICE); buffer_info->dma = 0; } if(buffer_info->skb) { @@ -1241,7 +1435,7 @@ e1000_clean_tx_ring(struct e1000_adapter *adapter) /* Free all the Tx ring sk_buffs */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -1281,6 +1475,10 @@ e1000_free_rx_resources(struct e1000_adapter *adapter) vfree(rx_ring->buffer_info); rx_ring->buffer_info = NULL; + kfree(rx_ring->ps_page); + rx_ring->ps_page = NULL; + kfree(rx_ring->ps_page_dma); + rx_ring->ps_page_dma = NULL; pci_free_consistent(pdev, rx_ring->size, rx_ring->desc, rx_ring->dma); @@ -1297,16 +1495,19 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) { struct e1000_desc_ring *rx_ring = &adapter->rx_ring; struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; struct pci_dev *pdev = adapter->pdev; unsigned long size; - unsigned int i; + unsigned int i, j; /* Free all the Rx ring sk_buffs */ for(i = 0; i < rx_ring->count; i++) { buffer_info = &rx_ring->buffer_info[i]; if(buffer_info->skb) { - + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; pci_unmap_single(pdev, buffer_info->dma, buffer_info->length, @@ -1314,11 +1515,25 @@ e1000_clean_rx_ring(struct e1000_adapter *adapter) dev_kfree_skb(buffer_info->skb); buffer_info->skb = NULL; + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!ps_page->ps_page[j]) break; + pci_unmap_single(pdev, + ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + put_page(ps_page->ps_page[j]); + ps_page->ps_page[j] = NULL; + } } } size = sizeof(struct e1000_buffer) * rx_ring->count; memset(rx_ring->buffer_info, 0, size); + size = sizeof(struct e1000_ps_page) * rx_ring->count; + memset(rx_ring->ps_page, 0, size); + size = sizeof(struct e1000_ps_page_dma) * rx_ring->count; + memset(rx_ring->ps_page_dma, 0, size); /* Zero out the descriptor ring */ @@ -1422,15 +1637,15 @@ e1000_set_multi(struct net_device *netdev) struct e1000_adapter *adapter = netdev->priv; struct e1000_hw *hw = &adapter->hw; struct dev_mc_list *mc_ptr; + unsigned long flags; uint32_t rctl; uint32_t hash_value; int i; - unsigned long flags; - - /* Check for Promiscuous and All Multicast modes */ spin_lock_irqsave(&adapter->tx_lock, flags); + /* Check for Promiscuous and All Multicast modes */ + rctl = E1000_READ_REG(hw, RCTL); if(netdev->flags & IFF_PROMISC) { @@ -1556,6 +1771,11 @@ e1000_watchdog_task(struct e1000_adapter *adapter) uint32_t link; e1000_check_for_link(&adapter->hw); + if (adapter->hw.mac_type == e1000_82573) { + e1000_enable_tx_pkt_filtering(&adapter->hw); + if(adapter->mng_vlan_id != adapter->hw.mng_cookie.vlan_id) + e1000_update_mng_vlan(adapter); + } if((adapter->hw.media_type == e1000_media_type_internal_serdes) && !(E1000_READ_REG(&adapter->hw, TXCW) & E1000_TXCW_ANE)) @@ -1632,7 +1852,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) /* Cause software interrupt to ensure rx ring is cleaned */ E1000_WRITE_REG(&adapter->hw, ICS, E1000_ICS_RXDMT0); - /* Force detection of hung controller every watchdog period*/ + /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = TRUE; /* Reset the timer */ @@ -1642,6 +1862,7 @@ e1000_watchdog_task(struct e1000_adapter *adapter) #define E1000_TX_FLAGS_CSUM 0x00000001 #define E1000_TX_FLAGS_VLAN 0x00000002 #define E1000_TX_FLAGS_TSO 0x00000004 +#define E1000_TX_FLAGS_IPV4 0x00000008 #define E1000_TX_FLAGS_VLAN_MASK 0xffff0000 #define E1000_TX_FLAGS_VLAN_SHIFT 16 @@ -1652,7 +1873,7 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) struct e1000_context_desc *context_desc; unsigned int i; uint32_t cmd_length = 0; - uint16_t ipcse, tucse, mss; + uint16_t ipcse = 0, tucse, mss; uint8_t ipcss, ipcso, tucss, tucso, hdr_len; int err; @@ -1665,23 +1886,37 @@ e1000_tso(struct e1000_adapter *adapter, struct sk_buff *skb) hdr_len = ((skb->h.raw - skb->data) + (skb->h.th->doff << 2)); mss = skb_shinfo(skb)->tso_size; - skb->nh.iph->tot_len = 0; - skb->nh.iph->check = 0; - skb->h.th->check = ~csum_tcpudp_magic(skb->nh.iph->saddr, - skb->nh.iph->daddr, - 0, - IPPROTO_TCP, - 0); + if(skb->protocol == ntohs(ETH_P_IP)) { + skb->nh.iph->tot_len = 0; + skb->nh.iph->check = 0; + skb->h.th->check = + ~csum_tcpudp_magic(skb->nh.iph->saddr, + skb->nh.iph->daddr, + 0, + IPPROTO_TCP, + 0); + cmd_length = E1000_TXD_CMD_IP; + ipcse = skb->h.raw - skb->data - 1; +#ifdef NETIF_F_TSO_IPV6 + } else if(skb->protocol == ntohs(ETH_P_IPV6)) { + skb->nh.ipv6h->payload_len = 0; + skb->h.th->check = + ~csum_ipv6_magic(&skb->nh.ipv6h->saddr, + &skb->nh.ipv6h->daddr, + 0, + IPPROTO_TCP, + 0); + ipcse = 0; +#endif + } ipcss = skb->nh.raw - skb->data; ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data; - ipcse = skb->h.raw - skb->data - 1; tucss = skb->h.raw - skb->data; tucso = (void *)&(skb->h.th->check) - (void *)skb->data; tucse = 0; cmd_length |= (E1000_TXD_CMD_DEXT | E1000_TXD_CMD_TSE | - E1000_TXD_CMD_IP | E1000_TXD_CMD_TCP | - (skb->len - (hdr_len))); + E1000_TXD_CMD_TCP | (skb->len - (hdr_len))); i = adapter->tx_ring.next_to_use; context_desc = E1000_CONTEXT_DESC(adapter->tx_ring, i); @@ -1760,6 +1995,15 @@ e1000_tx_map(struct e1000_adapter *adapter, struct sk_buff *skb, if(unlikely(mss && !nr_frags && size == len && size > 8)) size -= 4; #endif + /* work-around for errata 10 and it applies + * to all controllers in PCI-X mode + * The fix is to make sure that the first descriptor of a + * packet is smaller than 2048 - 16 - 16 (or 2016) bytes + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (size > 2015) && count == 0)) + size = 2015; + /* Workaround for potential 82544 hang in PCI-X. Avoid * terminating buffers within evenly-aligned dwords. */ if(unlikely(adapter->pcix_82544 && @@ -1840,7 +2084,10 @@ e1000_tx_queue(struct e1000_adapter *adapter, int count, int tx_flags) if(likely(tx_flags & E1000_TX_FLAGS_TSO)) { txd_lower |= E1000_TXD_CMD_DEXT | E1000_TXD_DTYP_D | E1000_TXD_CMD_TSE; - txd_upper |= (E1000_TXD_POPTS_IXSM | E1000_TXD_POPTS_TXSM) << 8; + txd_upper |= E1000_TXD_POPTS_TXSM << 8; + + if(likely(tx_flags & E1000_TX_FLAGS_IPV4)) + txd_upper |= E1000_TXD_POPTS_IXSM << 8; } if(likely(tx_flags & E1000_TX_FLAGS_CSUM)) { @@ -1915,6 +2162,53 @@ no_fifo_stall_required: return 0; } +#define MINIMUM_DHCP_PACKET_SIZE 282 +static inline int +e1000_transfer_dhcp_info(struct e1000_adapter *adapter, struct sk_buff *skb) +{ + struct e1000_hw *hw = &adapter->hw; + uint16_t length, offset; + if(vlan_tx_tag_present(skb)) { + if(!((vlan_tx_tag_get(skb) == adapter->hw.mng_cookie.vlan_id) && + ( adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT)) ) + return 0; + } + if(htons(ETH_P_IP) == skb->protocol) { + const struct iphdr *ip = skb->nh.iph; + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = (struct udphdr *)(skb->h.uh); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, length); + } + } + } else if((skb->len > MINIMUM_DHCP_PACKET_SIZE) && (!skb->protocol)) { + struct ethhdr *eth = (struct ethhdr *) skb->data; + if((htons(ETH_P_IP) == eth->h_proto)) { + const struct iphdr *ip = + (struct iphdr *)((uint8_t *)skb->data+14); + if(IPPROTO_UDP == ip->protocol) { + struct udphdr *udp = + (struct udphdr *)((uint8_t *)ip + + (ip->ihl << 2)); + if(ntohs(udp->dest) == 67) { + offset = (uint8_t *)udp + 8 - skb->data; + length = skb->len - offset; + + return e1000_mng_write_dhcp_info(hw, + (uint8_t *)udp + 8, + length); + } + } + } + } + return 0; +} + #define TXD_USE_COUNT(S, X) (((S) >> (X)) + 1 ) static int e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) @@ -1939,7 +2233,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) #ifdef NETIF_F_TSO mss = skb_shinfo(skb)->tso_size; - /* The controller does a simple calculation to + /* The controller does a simple calculation to * make sure there is enough room in the FIFO before * initiating the DMA for each buffer. The calc is: * 4 = ceil(buffer len/mss). To make sure we don't @@ -1952,7 +2246,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if((mss) || (skb->ip_summed == CHECKSUM_HW)) count++; - count++; /* for sentinel desc */ + count++; #else if(skb->ip_summed == CHECKSUM_HW) count++; @@ -1962,6 +2256,13 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) if(adapter->pcix_82544) count++; + /* work-around for errata 10 and it applies to all controllers + * in PCI-X mode, so add one more descriptor to the count + */ + if(unlikely((adapter->hw.bus_type == e1000_bus_type_pcix) && + (len > 2015))) + count++; + nr_frags = skb_shinfo(skb)->nr_frags; for(f = 0; f < nr_frags; f++) count += TXD_USE_COUNT(skb_shinfo(skb)->frags[f].size, @@ -1975,6 +2276,9 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) local_irq_restore(flags); return NETDEV_TX_LOCKED; } + if(adapter->hw.tx_pkt_filtering && (adapter->hw.mac_type == e1000_82573) ) + e1000_transfer_dhcp_info(adapter, skb); + /* need: count + 2 desc gap to keep tail from touching * head, otherwise try next time */ @@ -2003,6 +2307,7 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) tso = e1000_tso(adapter, skb); if (tso < 0) { dev_kfree_skb_any(skb); + spin_unlock_irqrestore(&adapter->tx_lock, flags); return NETDEV_TX_OK; } @@ -2011,6 +2316,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev) else if(likely(e1000_tx_csum(adapter, skb))) tx_flags |= E1000_TX_FLAGS_CSUM; + /* Old method was to assume IPv4 packet by default if TSO was enabled. + * 82573 hardware supports TSO capabilities for IPv6 as well... + * no longer assume, we must. */ + if(likely(skb->protocol == ntohs(ETH_P_IP))) + tx_flags |= E1000_TX_FLAGS_IPV4; + e1000_tx_queue(adapter, e1000_tx_map(adapter, skb, first, max_per_txd, nr_frags, mss), tx_flags); @@ -2077,7 +2388,6 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) { struct e1000_adapter *adapter = netdev->priv; - int old_mtu = adapter->rx_buffer_len; int max_frame = new_mtu + ENET_HEADER_SIZE + ETHERNET_FCS_SIZE; if((max_frame < MINIMUM_ETHERNET_FRAME_SIZE) || @@ -2086,29 +2396,45 @@ e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } - if(max_frame <= MAXIMUM_ETHERNET_FRAME_SIZE) { - adapter->rx_buffer_len = E1000_RXBUFFER_2048; - - } else if(adapter->hw.mac_type < e1000_82543) { - DPRINTK(PROBE, ERR, "Jumbo Frames not supported on 82542\n"); +#define MAX_STD_JUMBO_FRAME_SIZE 9216 + /* might want this to be bigger enum check... */ + if (adapter->hw.mac_type == e1000_82573 && + max_frame > MAXIMUM_ETHERNET_FRAME_SIZE) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82573\n"); return -EINVAL; + } - } else if(max_frame <= E1000_RXBUFFER_4096) { - adapter->rx_buffer_len = E1000_RXBUFFER_4096; - - } else if(max_frame <= E1000_RXBUFFER_8192) { - adapter->rx_buffer_len = E1000_RXBUFFER_8192; - + if(adapter->hw.mac_type > e1000_82547_rev_2) { + adapter->rx_buffer_len = max_frame; + E1000_ROUNDUP(adapter->rx_buffer_len, 1024); } else { - adapter->rx_buffer_len = E1000_RXBUFFER_16384; + if(unlikely((adapter->hw.mac_type < e1000_82543) && + (max_frame > MAXIMUM_ETHERNET_FRAME_SIZE))) { + DPRINTK(PROBE, ERR, "Jumbo Frames not supported " + "on 82542\n"); + return -EINVAL; + + } else { + if(max_frame <= E1000_RXBUFFER_2048) { + adapter->rx_buffer_len = E1000_RXBUFFER_2048; + } else if(max_frame <= E1000_RXBUFFER_4096) { + adapter->rx_buffer_len = E1000_RXBUFFER_4096; + } else if(max_frame <= E1000_RXBUFFER_8192) { + adapter->rx_buffer_len = E1000_RXBUFFER_8192; + } else if(max_frame <= E1000_RXBUFFER_16384) { + adapter->rx_buffer_len = E1000_RXBUFFER_16384; + } + } } - if(old_mtu != adapter->rx_buffer_len && netif_running(netdev)) { + netdev->mtu = new_mtu; + + if(netif_running(netdev)) { e1000_down(adapter); e1000_up(adapter); } - netdev->mtu = new_mtu; adapter->hw.max_frame_size = max_frame; return 0; @@ -2199,6 +2525,17 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->stats.tsctc += E1000_READ_REG(hw, TSCTC); adapter->stats.tsctfc += E1000_READ_REG(hw, TSCTFC); } + if(hw->mac_type > e1000_82547_rev_2) { + adapter->stats.iac += E1000_READ_REG(hw, IAC); + adapter->stats.icrxoc += E1000_READ_REG(hw, ICRXOC); + adapter->stats.icrxptc += E1000_READ_REG(hw, ICRXPTC); + adapter->stats.icrxatc += E1000_READ_REG(hw, ICRXATC); + adapter->stats.ictxptc += E1000_READ_REG(hw, ICTXPTC); + adapter->stats.ictxatc += E1000_READ_REG(hw, ICTXATC); + adapter->stats.ictxqec += E1000_READ_REG(hw, ICTXQEC); + adapter->stats.ictxqmtc += E1000_READ_REG(hw, ICTXQMTC); + adapter->stats.icrxdmtc += E1000_READ_REG(hw, ICRXDMTC); + } /* Fill out the OS statistics structure */ @@ -2213,9 +2550,9 @@ e1000_update_stats(struct e1000_adapter *adapter) adapter->net_stats.rx_errors = adapter->stats.rxerrc + adapter->stats.crcerrs + adapter->stats.algnerrc + - adapter->stats.rlec + adapter->stats.rnbc + - adapter->stats.mpc + adapter->stats.cexterr; - adapter->net_stats.rx_dropped = adapter->stats.rnbc; + adapter->stats.rlec + adapter->stats.mpc + + adapter->stats.cexterr; + adapter->net_stats.rx_dropped = adapter->stats.mpc; adapter->net_stats.rx_length_errors = adapter->stats.rlec; adapter->net_stats.rx_crc_errors = adapter->stats.crcerrs; adapter->net_stats.rx_frame_errors = adapter->stats.algnerrc; @@ -2300,11 +2637,11 @@ e1000_intr(int irq, void *data, struct pt_regs *regs) */ if(hw->mac_type == e1000_82547 || hw->mac_type == e1000_82547_rev_2){ atomic_inc(&adapter->irq_sem); - E1000_WRITE_REG(&adapter->hw, IMC, ~0); + E1000_WRITE_REG(hw, IMC, ~0); } for(i = 0; i < E1000_MAX_INTR; i++) - if(unlikely(!e1000_clean_rx_irq(adapter) & + if(unlikely(!adapter->clean_rx(adapter) & !e1000_clean_tx_irq(adapter))) break; @@ -2328,16 +2665,15 @@ e1000_clean(struct net_device *netdev, int *budget) int work_to_do = min(*budget, netdev->quota); int tx_cleaned; int work_done = 0; - + tx_cleaned = e1000_clean_tx_irq(adapter); - e1000_clean_rx_irq(adapter, &work_done, work_to_do); + adapter->clean_rx(adapter, &work_done, work_to_do); *budget -= work_done; netdev->quota -= work_done; - /* if no Tx and not enough Rx work done, exit the polling mode */ - if((!tx_cleaned && (work_done < work_to_do)) || - !netif_running(netdev)) { + /* If no Tx and no Rx work done, exit the polling mode */ + if ((!tx_cleaned && (work_done == 0)) || !netif_running(netdev)) { netif_rx_complete(netdev); e1000_irq_enable(adapter); return 0; @@ -2367,11 +2703,10 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) eop_desc = E1000_TX_DESC(*tx_ring, eop); while(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) { - /* pre-mature writeback of Tx descriptors */ - /* clear (free buffers and unmap pci_mapping) */ - /* previous_buffer_info */ + /* Premature writeback of Tx descriptors clear (free buffers + * and unmap pci_mapping) previous_buffer_info */ if (likely(adapter->previous_buffer_info.skb != NULL)) { - e1000_unmap_and_free_tx_resource(adapter, + e1000_unmap_and_free_tx_resource(adapter, &adapter->previous_buffer_info); } @@ -2380,26 +2715,30 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) buffer_info = &tx_ring->buffer_info[i]; cleaned = (i == eop); - /* pre-mature writeback of Tx descriptors */ - /* save the cleaning of the this for the */ - /* next iteration */ - if (cleaned) { - memcpy(&adapter->previous_buffer_info, - buffer_info, - sizeof(struct e1000_buffer)); - memset(buffer_info, - 0, - sizeof(struct e1000_buffer)); +#ifdef NETIF_F_TSO + if (!(netdev->features & NETIF_F_TSO)) { +#endif + e1000_unmap_and_free_tx_resource(adapter, + buffer_info); +#ifdef NETIF_F_TSO } else { - e1000_unmap_and_free_tx_resource(adapter, - buffer_info); + if (cleaned) { + memcpy(&adapter->previous_buffer_info, + buffer_info, + sizeof(struct e1000_buffer)); + memset(buffer_info, 0, + sizeof(struct e1000_buffer)); + } else { + e1000_unmap_and_free_tx_resource( + adapter, buffer_info); + } } +#endif tx_desc->buffer_addr = 0; tx_desc->lower.data = 0; tx_desc->upper.data = 0; - cleaned = (i == eop); if(unlikely(++i == tx_ring->count)) i = 0; } @@ -2416,57 +2755,107 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter) netif_wake_queue(netdev); spin_unlock(&adapter->tx_lock); - if(adapter->detect_tx_hung) { - /* detect a transmit hang in hardware, this serializes the + + /* Detect a transmit hang in hardware, this serializes the * check with the clearing of time_stamp and movement of i */ adapter->detect_tx_hung = FALSE; - if(tx_ring->buffer_info[i].dma && - time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) && - !(E1000_READ_REG(&adapter->hw, STATUS) & E1000_STATUS_TXOFF)) + if (tx_ring->buffer_info[i].dma && + time_after(jiffies, tx_ring->buffer_info[i].time_stamp + HZ) + && !(E1000_READ_REG(&adapter->hw, STATUS) & + E1000_STATUS_TXOFF)) { + + /* detected Tx unit hang */ + i = tx_ring->next_to_clean; + eop = tx_ring->buffer_info[i].next_to_watch; + eop_desc = E1000_TX_DESC(*tx_ring, eop); + DPRINTK(TX_ERR, ERR, "Detected Tx Unit Hang\n" + " TDH <%x>\n" + " TDT <%x>\n" + " next_to_use <%x>\n" + " next_to_clean <%x>\n" + "buffer_info[next_to_clean]\n" + " dma <%llx>\n" + " time_stamp <%lx>\n" + " next_to_watch <%x>\n" + " jiffies <%lx>\n" + " next_to_watch.status <%x>\n", + E1000_READ_REG(&adapter->hw, TDH), + E1000_READ_REG(&adapter->hw, TDT), + tx_ring->next_to_use, + i, + tx_ring->buffer_info[i].dma, + tx_ring->buffer_info[i].time_stamp, + eop, + jiffies, + eop_desc->upper.fields.status); netif_stop_queue(netdev); + } } +#ifdef NETIF_F_TSO + + if( unlikely(!(eop_desc->upper.data & cpu_to_le32(E1000_TXD_STAT_DD)) && + time_after(jiffies, adapter->previous_buffer_info.time_stamp + HZ))) + e1000_unmap_and_free_tx_resource( + adapter, &adapter->previous_buffer_info); +#endif return cleaned; } /** * e1000_rx_checksum - Receive Checksum Offload for 82543 - * @adapter: board private structure - * @rx_desc: receive descriptor - * @sk_buff: socket buffer with received data + * @adapter: board private structure + * @status_err: receive descriptor status and error fields + * @csum: receive descriptor csum field + * @sk_buff: socket buffer with received data **/ static inline void e1000_rx_checksum(struct e1000_adapter *adapter, - struct e1000_rx_desc *rx_desc, - struct sk_buff *skb) + uint32_t status_err, uint32_t csum, + struct sk_buff *skb) { + uint16_t status = (uint16_t)status_err; + uint8_t errors = (uint8_t)(status_err >> 24); + skb->ip_summed = CHECKSUM_NONE; + /* 82543 or newer only */ - if(unlikely((adapter->hw.mac_type < e1000_82543) || + if(unlikely(adapter->hw.mac_type < e1000_82543)) return; /* Ignore Checksum bit is set */ - (rx_desc->status & E1000_RXD_STAT_IXSM) || - /* TCP Checksum has not been calculated */ - (!(rx_desc->status & E1000_RXD_STAT_TCPCS)))) { - skb->ip_summed = CHECKSUM_NONE; - return; - } - - /* At this point we know the hardware did the TCP checksum */ - /* now look at the TCP checksum error bit */ - if(rx_desc->errors & E1000_RXD_ERR_TCPE) { + if(unlikely(status & E1000_RXD_STAT_IXSM)) return; + /* TCP/UDP checksum error bit is set */ + if(unlikely(errors & E1000_RXD_ERR_TCPE)) { /* let the stack verify checksum errors */ - skb->ip_summed = CHECKSUM_NONE; adapter->hw_csum_err++; + return; + } + /* TCP/UDP Checksum has not been calculated */ + if(adapter->hw.mac_type <= e1000_82547_rev_2) { + if(!(status & E1000_RXD_STAT_TCPCS)) + return; } else { + if(!(status & (E1000_RXD_STAT_TCPCS | E1000_RXD_STAT_UDPCS))) + return; + } + /* It must be a TCP or UDP packet with a valid checksum */ + if (likely(status & E1000_RXD_STAT_TCPCS)) { /* TCP checksum is good */ skb->ip_summed = CHECKSUM_UNNECESSARY; - adapter->hw_csum_good++; + } else if (adapter->hw.mac_type > e1000_82547_rev_2) { + /* IP fragment with UDP payload */ + /* Hardware complements the payload checksum, so we undo it + * and then put the value in host order for further stack use. + */ + csum = ntohl(csum ^ 0xFFFF); + skb->csum = csum; + skb->ip_summed = CHECKSUM_HW; } + adapter->hw_csum_good++; } /** - * e1000_clean_rx_irq - Send received data up the network stack + * e1000_clean_rx_irq - Send received data up the network stack; legacy * @adapter: board private structure **/ @@ -2513,7 +2902,7 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) if(unlikely(!(rx_desc->status & E1000_RXD_STAT_EOP))) { /* All receives must fit into a single buffer */ E1000_DBG("%s: Receive packet consumed multiple" - " buffers\n", netdev->name); + " buffers\n", netdev->name); dev_kfree_skb_irq(skb); goto next_desc; } @@ -2539,15 +2928,17 @@ e1000_clean_rx_irq(struct e1000_adapter *adapter) skb_put(skb, length - ETHERNET_FCS_SIZE); /* Receive Checksum Offload */ - e1000_rx_checksum(adapter, rx_desc, skb); - + e1000_rx_checksum(adapter, + (uint32_t)(rx_desc->status) | + ((uint32_t)(rx_desc->errors) << 24), + rx_desc->csum, skb); skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_E1000_NAPI if(unlikely(adapter->vlgrp && (rx_desc->status & E1000_RXD_STAT_VP))) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, - le16_to_cpu(rx_desc->special) & - E1000_RXD_SPC_VLAN_MASK); + le16_to_cpu(rx_desc->special) & + E1000_RXD_SPC_VLAN_MASK); } else { netif_receive_skb(skb); } @@ -2570,16 +2961,142 @@ next_desc: rx_desc = E1000_RX_DESC(*rx_ring, i); } - rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); + + return cleaned; +} + +/** + * e1000_clean_rx_irq_ps - Send received data up the network stack; packet split + * @adapter: board private structure + **/ + +static boolean_t +#ifdef CONFIG_E1000_NAPI +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, int *work_done, + int work_to_do) +#else +e1000_clean_rx_irq_ps(struct e1000_adapter *adapter) +#endif +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + union e1000_rx_desc_packet_split *rx_desc; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + uint32_t length, staterr; + boolean_t cleaned = FALSE; + + i = rx_ring->next_to_clean; + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + + while(staterr & E1000_RXD_STAT_DD) { + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; +#ifdef CONFIG_E1000_NAPI + if(unlikely(*work_done >= work_to_do)) + break; + (*work_done)++; +#endif + cleaned = TRUE; + pci_unmap_single(pdev, buffer_info->dma, + buffer_info->length, + PCI_DMA_FROMDEVICE); + + skb = buffer_info->skb; + + if(unlikely(!(staterr & E1000_RXD_STAT_EOP))) { + E1000_DBG("%s: Packet Split buffers didn't pick up" + " the full packet\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } + + if(unlikely(staterr & E1000_RXDEXT_ERR_FRAME_ERR_MASK)) { + dev_kfree_skb_irq(skb); + goto next_desc; + } + + length = le16_to_cpu(rx_desc->wb.middle.length0); + + if(unlikely(!length)) { + E1000_DBG("%s: Last part of the packet spanning" + " multiple descriptors\n", netdev->name); + dev_kfree_skb_irq(skb); + goto next_desc; + } + + /* Good Receive */ + skb_put(skb, length); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(!(length = le16_to_cpu(rx_desc->wb.upper.length[j]))) + break; + + pci_unmap_page(pdev, ps_page_dma->ps_page_dma[j], + PAGE_SIZE, PCI_DMA_FROMDEVICE); + ps_page_dma->ps_page_dma[j] = 0; + skb_shinfo(skb)->frags[j].page = + ps_page->ps_page[j]; + ps_page->ps_page[j] = NULL; + skb_shinfo(skb)->frags[j].page_offset = 0; + skb_shinfo(skb)->frags[j].size = length; + skb_shinfo(skb)->nr_frags++; + skb->len += length; + skb->data_len += length; + } - e1000_alloc_rx_buffers(adapter); + e1000_rx_checksum(adapter, staterr, + rx_desc->wb.lower.hi_dword.csum_ip.csum, skb); + skb->protocol = eth_type_trans(skb, netdev); + +#ifdef HAVE_RX_ZERO_COPY + if(likely(rx_desc->wb.upper.header_status & + E1000_RXDPS_HDRSTAT_HDRSP)) + skb_shinfo(skb)->zero_copy = TRUE; +#endif +#ifdef CONFIG_E1000_NAPI + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_receive_skb(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_receive_skb(skb); + } +#else /* CONFIG_E1000_NAPI */ + if(unlikely(adapter->vlgrp && (staterr & E1000_RXD_STAT_VP))) { + vlan_hwaccel_rx(skb, adapter->vlgrp, + le16_to_cpu(rx_desc->wb.middle.vlan & + E1000_RXD_SPC_VLAN_MASK)); + } else { + netif_rx(skb); + } +#endif /* CONFIG_E1000_NAPI */ + netdev->last_rx = jiffies; + +next_desc: + rx_desc->wb.middle.status_error &= ~0xFF; + buffer_info->skb = NULL; + if(unlikely(++i == rx_ring->count)) i = 0; + + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + staterr = rx_desc->wb.middle.status_error; + } + rx_ring->next_to_clean = i; + adapter->alloc_rx_buf(adapter); return cleaned; } /** - * e1000_alloc_rx_buffers - Replace used receive buffers + * e1000_alloc_rx_buffers - Replace used receive buffers; legacy & extended * @adapter: address of board private structure **/ @@ -2592,43 +3109,43 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) struct e1000_rx_desc *rx_desc; struct e1000_buffer *buffer_info; struct sk_buff *skb; - unsigned int i, bufsz; + unsigned int i; + unsigned int bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; i = rx_ring->next_to_use; buffer_info = &rx_ring->buffer_info[i]; while(!buffer_info->skb) { - bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; - skb = dev_alloc_skb(bufsz); + if(unlikely(!skb)) { /* Better luck next round */ break; } - /* fix for errata 23, cant cross 64kB boundary */ + /* Fix for errata 23, can't cross 64kB boundary */ if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { struct sk_buff *oldskb = skb; - DPRINTK(RX_ERR,ERR, - "skb align check failed: %u bytes at %p\n", - bufsz, skb->data); - /* try again, without freeing the previous */ + DPRINTK(RX_ERR, ERR, "skb align check failed: %u bytes " + "at %p\n", bufsz, skb->data); + /* Try again, without freeing the previous */ skb = dev_alloc_skb(bufsz); + /* Failed allocation, critical failure */ if (!skb) { dev_kfree_skb(oldskb); break; } + if (!e1000_check_64k_bound(adapter, skb->data, bufsz)) { /* give up */ dev_kfree_skb(skb); dev_kfree_skb(oldskb); break; /* while !buffer_info->skb */ } else { - /* move on with the new one */ + /* Use new allocation */ dev_kfree_skb(oldskb); } } - /* Make buffer alignment 2 beyond a 16 byte boundary * this will result in a 16 byte aligned IP header after * the 14 byte MAC header is removed @@ -2644,25 +3161,23 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); - /* fix for errata 23, cant cross 64kB boundary */ - if(!e1000_check_64k_bound(adapter, - (void *)(unsigned long)buffer_info->dma, - adapter->rx_buffer_len)) { - DPRINTK(RX_ERR,ERR, - "dma align check failed: %u bytes at %ld\n", - adapter->rx_buffer_len, (unsigned long)buffer_info->dma); - + /* Fix for errata 23, can't cross 64kB boundary */ + if (!e1000_check_64k_bound(adapter, + (void *)(unsigned long)buffer_info->dma, + adapter->rx_buffer_len)) { + DPRINTK(RX_ERR, ERR, + "dma align check failed: %u bytes at %p\n", + adapter->rx_buffer_len, + (void *)(unsigned long)buffer_info->dma); dev_kfree_skb(skb); buffer_info->skb = NULL; - pci_unmap_single(pdev, - buffer_info->dma, + pci_unmap_single(pdev, buffer_info->dma, adapter->rx_buffer_len, PCI_DMA_FROMDEVICE); break; /* while !buffer_info->skb */ } - rx_desc = E1000_RX_DESC(*rx_ring, i); rx_desc->buffer_addr = cpu_to_le64(buffer_info->dma); @@ -2672,7 +3187,6 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) * applicable for weak-ordered memory model archs, * such as IA-64). */ wmb(); - E1000_WRITE_REG(&adapter->hw, RDT, i); } @@ -2684,6 +3198,95 @@ e1000_alloc_rx_buffers(struct e1000_adapter *adapter) } /** + * e1000_alloc_rx_buffers_ps - Replace used receive buffers; packet split + * @adapter: address of board private structure + **/ + +static void +e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter) +{ + struct e1000_desc_ring *rx_ring = &adapter->rx_ring; + struct net_device *netdev = adapter->netdev; + struct pci_dev *pdev = adapter->pdev; + union e1000_rx_desc_packet_split *rx_desc; + struct e1000_buffer *buffer_info; + struct e1000_ps_page *ps_page; + struct e1000_ps_page_dma *ps_page_dma; + struct sk_buff *skb; + unsigned int i, j; + + i = rx_ring->next_to_use; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + + while(!buffer_info->skb) { + rx_desc = E1000_RX_DESC_PS(*rx_ring, i); + + for(j = 0; j < PS_PAGE_BUFFERS; j++) { + if(unlikely(!ps_page->ps_page[j])) { + ps_page->ps_page[j] = + alloc_page(GFP_ATOMIC); + if(unlikely(!ps_page->ps_page[j])) + goto no_buffers; + ps_page_dma->ps_page_dma[j] = + pci_map_page(pdev, + ps_page->ps_page[j], + 0, PAGE_SIZE, + PCI_DMA_FROMDEVICE); + } + /* Refresh the desc even if buffer_addrs didn't + * change because each write-back erases this info. + */ + rx_desc->read.buffer_addr[j+1] = + cpu_to_le64(ps_page_dma->ps_page_dma[j]); + } + + skb = dev_alloc_skb(adapter->rx_ps_bsize0 + NET_IP_ALIGN); + + if(unlikely(!skb)) + break; + + /* Make buffer alignment 2 beyond a 16 byte boundary + * this will result in a 16 byte aligned IP header after + * the 14 byte MAC header is removed + */ + skb_reserve(skb, NET_IP_ALIGN); + + skb->dev = netdev; + + buffer_info->skb = skb; + buffer_info->length = adapter->rx_ps_bsize0; + buffer_info->dma = pci_map_single(pdev, skb->data, + adapter->rx_ps_bsize0, + PCI_DMA_FROMDEVICE); + + rx_desc->read.buffer_addr[0] = cpu_to_le64(buffer_info->dma); + + if(unlikely((i & ~(E1000_RX_BUFFER_WRITE - 1)) == i)) { + /* Force memory writes to complete before letting h/w + * know there are new descriptors to fetch. (Only + * applicable for weak-ordered memory model archs, + * such as IA-64). */ + wmb(); + /* Hardware increments by 16 bytes, but packet split + * descriptors are 32 bytes...so we increment tail + * twice as much. + */ + E1000_WRITE_REG(&adapter->hw, RDT, i<<1); + } + + if(unlikely(++i == rx_ring->count)) i = 0; + buffer_info = &rx_ring->buffer_info[i]; + ps_page = &rx_ring->ps_page[i]; + ps_page_dma = &rx_ring->ps_page_dma[i]; + } + +no_buffers: + rx_ring->next_to_use = i; +} + +/** * e1000_smartspeed - Workaround for SmartSpeed on 82541 and 82547 controllers. * @adapter: **/ @@ -2856,9 +3459,10 @@ void e1000_pci_set_mwi(struct e1000_hw *hw) { struct e1000_adapter *adapter = hw->back; + int ret_val = pci_set_mwi(adapter->pdev); - int ret; - ret = pci_set_mwi(adapter->pdev); + if(ret_val) + DPRINTK(PROBE, ERR, "Error in setting MWI\n"); } void @@ -2917,6 +3521,7 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl |= E1000_RCTL_VFE; rctl &= ~E1000_RCTL_CFIEN; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + e1000_update_mng_vlan(adapter); } else { /* disable VLAN tag insert/strip */ ctrl = E1000_READ_REG(&adapter->hw, CTRL); @@ -2927,6 +3532,10 @@ e1000_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) rctl = E1000_READ_REG(&adapter->hw, RCTL); rctl &= ~E1000_RCTL_VFE; E1000_WRITE_REG(&adapter->hw, RCTL, rctl); + if(adapter->mng_vlan_id != (uint16_t)E1000_MNG_VLAN_NONE) { + e1000_vlan_rx_kill_vid(netdev, adapter->mng_vlan_id); + adapter->mng_vlan_id = E1000_MNG_VLAN_NONE; + } } e1000_irq_enable(adapter); @@ -2937,7 +3546,10 @@ e1000_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid) { struct e1000_adapter *adapter = netdev->priv; uint32_t vfta, index; - + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* add VID to filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -2958,6 +3570,10 @@ e1000_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid) e1000_irq_enable(adapter); + if((adapter->hw.mng_cookie.status & + E1000_MNG_DHCP_COOKIE_STATUS_VLAN_SUPPORT) && + (vid == adapter->mng_vlan_id)) + return; /* remove VID from filter table */ index = (vid >> 5) & 0x7F; vfta = E1000_READ_REG_ARRAY(&adapter->hw, VFTA, index); @@ -3004,8 +3620,7 @@ e1000_set_spd_dplx(struct e1000_adapter *adapter, uint16_t spddplx) break; case SPEED_1000 + DUPLEX_HALF: /* not supported */ default: - DPRINTK(PROBE, ERR, - "Unsupported Speed/Duplexity configuration\n"); + DPRINTK(PROBE, ERR, "Unsupported Speed/Duplex configuration\n"); return -EINVAL; } return 0; @@ -3033,7 +3648,7 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t ctrl, ctrl_ext, rctl, manc, status; + uint32_t ctrl, ctrl_ext, rctl, manc, status, swsm; uint32_t wufc = adapter->wol; netif_device_detach(netdev); @@ -3075,6 +3690,9 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) E1000_WRITE_REG(&adapter->hw, CTRL_EXT, ctrl_ext); } + /* Allow time for pending master requests to run */ + e1000_disable_pciex_master(&adapter->hw); + E1000_WRITE_REG(&adapter->hw, WUC, E1000_WUC_PME_EN); E1000_WRITE_REG(&adapter->hw, WUFC, wufc); pci_enable_wake(pdev, 3, 1); @@ -3099,6 +3717,16 @@ e1000_suspend(struct pci_dev *pdev, uint32_t state) } } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm & ~E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + pci_disable_device(pdev); state = (state > 0) ? 3 : 0; @@ -3113,13 +3741,12 @@ e1000_resume(struct pci_dev *pdev) { struct net_device *netdev = pci_get_drvdata(pdev); struct e1000_adapter *adapter = netdev->priv; - uint32_t manc, ret; + uint32_t manc, ret, swsm; pci_set_power_state(pdev, 0); pci_restore_state(pdev); ret = pci_enable_device(pdev); - if (pdev->is_busmaster) - pci_set_master(pdev); + pci_set_master(pdev); pci_enable_wake(pdev, 3, 0); pci_enable_wake(pdev, 4, 0); /* 4 == D3 cold */ @@ -3139,10 +3766,19 @@ e1000_resume(struct pci_dev *pdev) E1000_WRITE_REG(&adapter->hw, MANC, manc); } + switch(adapter->hw.mac_type) { + case e1000_82573: + swsm = E1000_READ_REG(&adapter->hw, SWSM); + E1000_WRITE_REG(&adapter->hw, SWSM, + swsm | E1000_SWSM_DRV_LOAD); + break; + default: + break; + } + return 0; } #endif - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -3150,7 +3786,7 @@ e1000_resume(struct pci_dev *pdev) * the interrupt routine is executing. */ static void -e1000_netpoll (struct net_device *netdev) +e1000_netpoll(struct net_device *netdev) { struct e1000_adapter *adapter = netdev->priv; disable_irq(adapter->pdev->irq); diff --git a/drivers/net/e1000/e1000_osdep.h b/drivers/net/e1000/e1000_osdep.h index 970c656a517..aac64de6143 100644 --- a/drivers/net/e1000/e1000_osdep.h +++ b/drivers/net/e1000/e1000_osdep.h @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -42,7 +42,12 @@ #include <linux/sched.h> #ifndef msec_delay -#define msec_delay(x) msleep(x) +#define msec_delay(x) do { if(in_interrupt()) { \ + /* Don't mdelay in interrupt context! */ \ + BUG(); \ + } else { \ + msleep(x); \ + } } while(0) /* Some workarounds require millisecond delays and are run during interrupt * context. Most notably, when establishing link, the phy may need tweaking @@ -96,6 +101,29 @@ typedef enum { (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ ((offset) << 2))) +#define E1000_READ_REG_ARRAY_DWORD E1000_READ_REG_ARRAY +#define E1000_WRITE_REG_ARRAY_DWORD E1000_WRITE_REG_ARRAY + +#define E1000_WRITE_REG_ARRAY_WORD(a, reg, offset, value) ( \ + writew((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1)))) + +#define E1000_READ_REG_ARRAY_WORD(a, reg, offset) ( \ + readw((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + ((offset) << 1))) + +#define E1000_WRITE_REG_ARRAY_BYTE(a, reg, offset, value) ( \ + writeb((value), ((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset)))) + +#define E1000_READ_REG_ARRAY_BYTE(a, reg, offset) ( \ + readb((a)->hw_addr + \ + (((a)->mac_type >= e1000_82543) ? E1000_##reg : E1000_82542_##reg) + \ + (offset))) + #define E1000_WRITE_FLUSH(a) E1000_READ_REG(a, STATUS) #endif /* _E1000_OSDEP_H_ */ diff --git a/drivers/net/e1000/e1000_param.c b/drivers/net/e1000/e1000_param.c index e914d09fe6f..676247f9f1c 100644 --- a/drivers/net/e1000/e1000_param.c +++ b/drivers/net/e1000/e1000_param.c @@ -1,7 +1,7 @@ /******************************************************************************* - Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved. + Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free @@ -478,7 +478,6 @@ e1000_check_options(struct e1000_adapter *adapter) DPRINTK(PROBE, INFO, "%s set to dynamic mode\n", opt.name); break; - case -1: default: e1000_validate_option(&adapter->itr, &opt, adapter); diff --git a/drivers/net/fmv18x.c b/drivers/net/fmv18x.c deleted file mode 100644 index 04c74852347..00000000000 --- a/drivers/net/fmv18x.c +++ /dev/null @@ -1,689 +0,0 @@ -/* fmv18x.c: A network device driver for the Fujitsu FMV-181/182/183/184. - - Original: at1700.c (1993-94 by Donald Becker). - Copyright 1993 United States Government as represented by the - Director, National Security Agency. - The author may be reached as becker@scyld.com, or C/O - Scyld Computing Corporation - 410 Severn Ave., Suite 210 - Annapolis MD 21403 - - Modified by Yutaka TAMIYA (tamy@flab.fujitsu.co.jp) - Copyright 1994 Fujitsu Laboratories Ltd. - Special thanks to: - Masayoshi UTAKA (utaka@ace.yk.fujitsu.co.jp) - for testing this driver. - H. NEGISHI (agy, negishi@sun45.psd.cs.fujitsu.co.jp) - for suggestion of some program modification. - Masahiro SEKIGUCHI <seki@sysrap.cs.fujitsu.co.jp> - for suggestion of some program modification. - Kazutoshi MORIOKA (morioka@aurora.oaks.cs.fujitsu.co.jp) - for testing this driver. - - This software may be used and distributed according to the terms - of the GNU General Public License, incorporated herein by reference. - - This is a device driver for the Fujitsu FMV-181/182/183/184, which - is a straight-forward Fujitsu MB86965 implementation. - - Sources: - at1700.c - The Fujitsu MB86965 datasheet. - The Fujitsu FMV-181/182 user's guide -*/ - -static const char version[] = - "fmv18x.c:v2.2.0 09/24/98 Yutaka TAMIYA (tamy@flab.fujitsu.co.jp)\n"; - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/fcntl.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/in.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/init.h> -#include <linux/errno.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> -#include <asm/dma.h> - -#define DRV_NAME "fmv18x" - -static unsigned fmv18x_probe_list[] __initdata = { - 0x220, 0x240, 0x260, 0x280, 0x2a0, 0x2c0, 0x300, 0x340, 0 -}; - -/* use 0 for production, 1 for verification, >2 for debug */ -#ifndef NET_DEBUG -#define NET_DEBUG 1 -#endif -static unsigned int net_debug = NET_DEBUG; - -typedef unsigned char uchar; - -/* Information that need to be kept for each board. */ -struct net_local { - struct net_device_stats stats; - long open_time; /* Useless example local info. */ - uint tx_started:1; /* Number of packet on the Tx queue. */ - uint tx_queue_ready:1; /* Tx queue is ready to be sent. */ - uint rx_started:1; /* Packets are Rxing. */ - uchar tx_queue; /* Number of packet on the Tx queue. */ - ushort tx_queue_len; /* Current length of the Tx queue. */ - spinlock_t lock; -}; - - -/* Offsets from the base address. */ -#define STATUS 0 -#define TX_STATUS 0 -#define RX_STATUS 1 -#define TX_INTR 2 /* Bit-mapped interrupt enable registers. */ -#define RX_INTR 3 -#define TX_MODE 4 -#define RX_MODE 5 -#define CONFIG_0 6 /* Misc. configuration settings. */ -#define CONFIG_1 7 -/* Run-time register bank 2 definitions. */ -#define DATAPORT 8 /* Word-wide DMA or programmed-I/O dataport. */ -#define TX_START 10 -#define COL16CNTL 11 /* Controll Reg for 16 collisions */ -#define MODE13 13 -/* Fujitsu FMV-18x Card Configuration */ -#define FJ_STATUS0 0x10 -#define FJ_STATUS1 0x11 -#define FJ_CONFIG0 0x12 -#define FJ_CONFIG1 0x13 -#define FJ_MACADDR 0x14 /* 0x14 - 0x19 */ -#define FJ_BUFCNTL 0x1A -#define FJ_BUFDATA 0x1C -#define FMV18X_IO_EXTENT 32 - -/* Index to functions, as function prototypes. */ - -static int fmv18x_probe1(struct net_device *dev, short ioaddr); -static int net_open(struct net_device *dev); -static int net_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t net_interrupt(int irq, void *dev_id, struct pt_regs *regs); -static void net_rx(struct net_device *dev); -static void net_timeout(struct net_device *dev); -static int net_close(struct net_device *dev); -static struct net_device_stats *net_get_stats(struct net_device *dev); -static void set_multicast_list(struct net_device *dev); - - -/* Check for a network adaptor of this type, and return '0' iff one exists. - If dev->base_addr == 0, probe all likely locations. - If dev->base_addr == 1, always return failure. - If dev->base_addr == 2, allocate space for the device and return success - (detachable devices only). - */ - -static int io = 0x220; -static int irq; - -struct net_device * __init fmv18x_probe(int unit) -{ - struct net_device *dev = alloc_etherdev(sizeof(struct net_local)); - unsigned *port; - int err = 0; - - if (!dev) - return ERR_PTR(-ENODEV); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - irq = dev->irq; - } - - SET_MODULE_OWNER(dev); - - if (io > 0x1ff) { /* Check a single specified location. */ - err = fmv18x_probe1(dev, io); - } else if (io != 0) { /* Don't probe at all. */ - err = -ENXIO; - } else { - for (port = fmv18x_probe_list; *port; port++) - if (fmv18x_probe1(dev, *port) == 0) - break; - if (!*port) - err = -ENODEV; - } - if (err) - goto out; - err = register_netdev(dev); - if (err) - goto out1; - return dev; -out1: - free_irq(dev->irq, dev); - release_region(dev->base_addr, FMV18X_IO_EXTENT); -out: - free_netdev(dev); - return ERR_PTR(err); -} - -/* The Fujitsu datasheet suggests that the NIC be probed for by checking its - "signature", the default bit pattern after a reset. This *doesn't* work -- - there is no way to reset the bus interface without a complete power-cycle! - - It turns out that ATI came to the same conclusion I did: the only thing - that can be done is checking a few bits and then diving right into MAC - address check. */ - -static int __init fmv18x_probe1(struct net_device *dev, short ioaddr) -{ - char irqmap[4] = {3, 7, 10, 15}; - char irqmap_pnp[8] = {3, 4, 5, 7, 9, 10, 11, 15}; - unsigned int i, retval; - struct net_local *lp; - - /* Resetting the chip doesn't reset the ISA interface, so don't bother. - That means we have to be careful with the register values we probe for. - */ - - if (!request_region(ioaddr, FMV18X_IO_EXTENT, DRV_NAME)) - return -EBUSY; - - dev->irq = irq; - dev->base_addr = ioaddr; - - /* Check I/O address configuration and Fujitsu vendor code */ - if (inb(ioaddr+FJ_MACADDR ) != 0x00 - || inb(ioaddr+FJ_MACADDR+1) != 0x00 - || inb(ioaddr+FJ_MACADDR+2) != 0x0e) { - retval = -ENODEV; - goto out; - } - - /* Check PnP mode for FMV-183/184/183A/184A. */ - /* This PnP routine is very poor. IO and IRQ should be known. */ - if (inb(ioaddr + FJ_STATUS1) & 0x20) { - for (i = 0; i < 8; i++) { - if (dev->irq == irqmap_pnp[i]) - break; - } - if (i == 8) { - retval = -ENODEV; - goto out; - } - } else { - if (fmv18x_probe_list[inb(ioaddr + FJ_CONFIG0) & 0x07] != ioaddr) - return -ENODEV; - dev->irq = irqmap[(inb(ioaddr + FJ_CONFIG0)>>6) & 0x03]; - } - - /* Snarf the interrupt vector now. */ - retval = request_irq(dev->irq, &net_interrupt, 0, DRV_NAME, dev); - if (retval) { - printk ("FMV-18x found at %#3x, but it's unusable due to a conflict on" - "IRQ %d.\n", ioaddr, dev->irq); - goto out; - } - - printk("%s: FMV-18x found at %#3x, IRQ %d, address ", dev->name, - ioaddr, dev->irq); - - for(i = 0; i < 6; i++) { - unsigned char val = inb(ioaddr + FJ_MACADDR + i); - printk("%02x", val); - dev->dev_addr[i] = val; - } - - /* "FJ_STATUS0" 12 bit 0x0400 means use regular 100 ohm 10baseT signals, - rather than 150 ohm shielded twisted pair compensation. - 0x0000 == auto-sense the interface - 0x0800 == use TP interface - 0x1800 == use coax interface - */ - { - const char *porttype[] = {"auto-sense", "10baseT", "auto-sense", "10base2/5"}; - ushort setup_value = inb(ioaddr + FJ_STATUS0); - - switch( setup_value & 0x07 ){ - case 0x01 /* 10base5 */: - case 0x02 /* 10base2 */: dev->if_port = 0x18; break; - case 0x04 /* 10baseT */: dev->if_port = 0x08; break; - default /* auto-sense*/: dev->if_port = 0x00; break; - } - printk(" %s interface.\n", porttype[(dev->if_port>>3) & 3]); - } - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure (TAMIYA) */ - - /* wait for a while */ - udelay(200); - - /* Set the station address in bank zero. */ - outb(0x00, ioaddr + CONFIG_1); - for (i = 0; i < 6; i++) - outb(dev->dev_addr[i], ioaddr + 8 + i); - - /* Switch to bank 1 and set the multicast table to accept none. */ - outb(0x04, ioaddr + CONFIG_1); - for (i = 0; i < 8; i++) - outb(0x00, ioaddr + 8 + i); - - /* Switch to bank 2 and lock our I/O address. */ - outb(0x08, ioaddr + CONFIG_1); - outb(dev->if_port, ioaddr + MODE13); - outb(0x00, ioaddr + COL16CNTL); - - if (net_debug) - printk(version); - - /* Initialize the device structure. */ - dev->priv = kmalloc(sizeof(struct net_local), GFP_KERNEL); - if (!dev->priv) { - retval = -ENOMEM; - goto out_irq; - } - memset(dev->priv, 0, sizeof(struct net_local)); - lp = dev->priv; - spin_lock_init(&lp->lock); - - dev->open = net_open; - dev->stop = net_close; - dev->hard_start_xmit = net_send_packet; - dev->tx_timeout = net_timeout; - dev->watchdog_timeo = HZ/10; - dev->get_stats = net_get_stats; - dev->set_multicast_list = set_multicast_list; - return 0; - -out_irq: - free_irq(dev->irq, dev); -out: - release_region(ioaddr, FMV18X_IO_EXTENT); - return retval; -} - - -static int net_open(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - - /* Set the configuration register 0 to 32K 100ns. byte-wide memory, - 16 bit bus access, and two 4K Tx, enable the Rx and Tx. */ - outb(0x5a, ioaddr + CONFIG_0); - - /* Powerup and switch to register bank 2 for the run-time registers. */ - outb(0xe8, ioaddr + CONFIG_1); - - lp->tx_started = 0; - lp->tx_queue_ready = 1; - lp->rx_started = 0; - lp->tx_queue = 0; - lp->tx_queue_len = 0; - - /* Clear Tx and Rx Status */ - outb(0xff, ioaddr + TX_STATUS); - outb(0xff, ioaddr + RX_STATUS); - lp->open_time = jiffies; - - netif_start_queue(dev); - - /* Enable the IRQ of the LAN Card */ - outb(0x80, ioaddr + FJ_CONFIG1); - - /* Enable both Tx and Rx interrupts */ - outw(0x8182, ioaddr+TX_INTR); - - return 0; -} - -static void net_timeout(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - unsigned long flags; - - - printk(KERN_WARNING "%s: transmit timed out with status %04x, %s?\n", dev->name, - htons(inw(ioaddr + TX_STATUS)), - inb(ioaddr + TX_STATUS) & 0x80 - ? "IRQ conflict" : "network cable problem"); - printk(KERN_WARNING "%s: timeout registers: %04x %04x %04x %04x %04x %04x %04x %04x.\n", - dev->name, htons(inw(ioaddr + 0)), - htons(inw(ioaddr + 2)), htons(inw(ioaddr + 4)), - htons(inw(ioaddr + 6)), htons(inw(ioaddr + 8)), - htons(inw(ioaddr +10)), htons(inw(ioaddr +12)), - htons(inw(ioaddr +14))); - printk(KERN_WARNING "eth card: %04x %04x\n", - htons(inw(ioaddr+FJ_STATUS0)), - htons(inw(ioaddr+FJ_CONFIG0))); - lp->stats.tx_errors++; - /* ToDo: We should try to restart the adaptor... */ - spin_lock_irqsave(&lp->lock, flags); - - /* Initialize LAN Controller and LAN Card */ - outb(0xda, ioaddr + CONFIG_0); /* Initialize LAN Controller */ - outb(0x00, ioaddr + CONFIG_1); /* Stand by mode */ - outb(0x00, ioaddr + FJ_CONFIG1); /* Disable IRQ of LAN Card */ - outb(0x00, ioaddr + FJ_BUFCNTL); /* Reset ? I'm not sure */ - net_open(dev); - spin_unlock_irqrestore(&lp->lock, flags); - - netif_wake_queue(dev); -} - -static int net_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - short length = skb->len; - unsigned char *buf; - unsigned long flags; - - /* Block a transmit from overlapping. */ - - if (length > ETH_FRAME_LEN) { - if (net_debug) - printk("%s: Attempting to send a large packet (%d bytes).\n", - dev->name, length); - return 1; - } - - if (length < ETH_ZLEN) { - skb = skb_padto(skb, ETH_ZLEN); - if (skb == NULL) - return 0; - length = ETH_ZLEN; - } - buf = skb->data; - - if (net_debug > 4) - printk("%s: Transmitting a packet of length %lu.\n", dev->name, - (unsigned long)skb->len); - /* We may not start transmitting unless we finish transferring - a packet into the Tx queue. During executing the following - codes we possibly catch a Tx interrupt. Thus we flag off - tx_queue_ready, so that we prevent the interrupt routine - (net_interrupt) to start transmitting. */ - spin_lock_irqsave(&lp->lock, flags); - lp->tx_queue_ready = 0; - { - outw(length, ioaddr + DATAPORT); - outsw(ioaddr + DATAPORT, buf, (length + 1) >> 1); - lp->tx_queue++; - lp->tx_queue_len += length + 2; - } - lp->tx_queue_ready = 1; - spin_unlock_irqrestore(&lp->lock, flags); - - if (lp->tx_started == 0) { - /* If the Tx is idle, always trigger a transmit. */ - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - lp->tx_started = 1; - } else if (lp->tx_queue_len >= 4096 - 1502) /* No room for a packet */ - netif_stop_queue(dev); - - dev_kfree_skb(skb); - return 0; -} - -/* The typical workload of the driver: - Handle the network interface interrupts. */ -static irqreturn_t -net_interrupt(int irq, void *dev_id, struct pt_regs *regs) -{ - struct net_device *dev = dev_id; - struct net_local *lp; - int ioaddr, status; - - ioaddr = dev->base_addr; - lp = dev->priv; - status = inw(ioaddr + TX_STATUS); - outw(status, ioaddr + TX_STATUS); - - if (net_debug > 4) - printk("%s: Interrupt with status %04x.\n", dev->name, status); - if (lp->rx_started == 0 && - (status & 0xff00 || (inb(ioaddr + RX_MODE) & 0x40) == 0)) { - /* Got a packet(s). - We cannot execute net_rx more than once at the same time for - the same device. During executing net_rx, we possibly catch a - Tx interrupt. Thus we flag on rx_started, so that we prevent - the interrupt routine (net_interrupt) to dive into net_rx - again. */ - lp->rx_started = 1; - outb(0x00, ioaddr + RX_INTR); /* Disable RX intr. */ - net_rx(dev); - outb(0x81, ioaddr + RX_INTR); /* Enable RX intr. */ - lp->rx_started = 0; - } - if (status & 0x00ff) { - if (status & 0x02) { - /* More than 16 collisions occurred */ - if (net_debug > 4) - printk("%s: 16 Collision occur during Txing.\n", dev->name); - /* Cancel sending a packet. */ - outb(0x03, ioaddr + COL16CNTL); - lp->stats.collisions++; - } - if (status & 0x82) { - spin_lock(&lp->lock); - lp->stats.tx_packets++; - if (lp->tx_queue && lp->tx_queue_ready) { - outb(0x80 | lp->tx_queue, ioaddr + TX_START); - lp->tx_queue = 0; - lp->tx_queue_len = 0; - dev->trans_start = jiffies; - netif_wake_queue(dev); /* Inform upper layers. */ - } else { - lp->tx_started = 0; - netif_wake_queue(dev); /* Inform upper layers. */ - } - spin_unlock(&lp->lock); - } - } - return IRQ_RETVAL(status); -} - -/* We have a good packet(s), get it/them out of the buffers. */ -static void net_rx(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - int ioaddr = dev->base_addr; - int boguscount = 5; - - while ((inb(ioaddr + RX_MODE) & 0x40) == 0) { - /* Clear PKT_RDY bit: by agy 19940922 */ - /* outb(0x80, ioaddr + RX_STATUS); */ - ushort status = inw(ioaddr + DATAPORT); - - if (net_debug > 4) - printk("%s: Rxing packet mode %02x status %04x.\n", - dev->name, inb(ioaddr + RX_MODE), status); -#ifndef final_version - if (status == 0) { - outb(0x05, ioaddr + 14); - break; - } -#endif - - if ((status & 0xF0) != 0x20) { /* There was an error. */ - lp->stats.rx_errors++; - if (status & 0x08) lp->stats.rx_length_errors++; - if (status & 0x04) lp->stats.rx_frame_errors++; - if (status & 0x02) lp->stats.rx_crc_errors++; - if (status & 0x01) lp->stats.rx_over_errors++; - } else { - ushort pkt_len = inw(ioaddr + DATAPORT); - /* Malloc up new buffer. */ - struct sk_buff *skb; - - if (pkt_len > 1550) { - printk("%s: The FMV-18x claimed a very large packet, size %d.\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_errors++; - break; - } - skb = dev_alloc_skb(pkt_len+3); - if (skb == NULL) { - printk("%s: Memory squeeze, dropping packet (len %d).\n", - dev->name, pkt_len); - outb(0x05, ioaddr + 14); - lp->stats.rx_dropped++; - break; - } - skb->dev = dev; - skb_reserve(skb,2); - - insw(ioaddr + DATAPORT, skb_put(skb,pkt_len), (pkt_len + 1) >> 1); - - if (net_debug > 5) { - int i; - printk("%s: Rxed packet of length %d: ", dev->name, pkt_len); - for (i = 0; i < 14; i++) - printk(" %02x", skb->data[i]); - printk(".\n"); - } - - skb->protocol=eth_type_trans(skb, dev); - netif_rx(skb); - dev->last_rx = jiffies; - lp->stats.rx_packets++; - lp->stats.rx_bytes += pkt_len; - } - if (--boguscount <= 0) - break; - } - - /* If any worth-while packets have been received, dev_rint() - has done a mark_bh(NET_BH) for us and will work on them - when we get to the bottom-half routine. */ - { - int i; - for (i = 0; i < 20; i++) { - if ((inb(ioaddr + RX_MODE) & 0x40) == 0x40) - break; - (void)inw(ioaddr + DATAPORT); /* dummy status read */ - outb(0x05, ioaddr + 14); - } - - if (net_debug > 5 && i > 0) - printk("%s: Exint Rx packet with mode %02x after %d ticks.\n", - dev->name, inb(ioaddr + RX_MODE), i); - } - - return; -} - -/* The inverse routine to net_open(). */ -static int net_close(struct net_device *dev) -{ - int ioaddr = dev->base_addr; - - ((struct net_local *)dev->priv)->open_time = 0; - - netif_stop_queue(dev); - - /* Set configuration register 0 to disable Tx and Rx. */ - outb(0xda, ioaddr + CONFIG_0); - - /* Update the statistics -- ToDo. */ - - /* Power-down the chip. Green, green, green! */ - outb(0x00, ioaddr + CONFIG_1); - - /* Set the ethernet adaptor disable IRQ */ - outb(0x00, ioaddr + FJ_CONFIG1); - - return 0; -} - -/* Get the current statistics. This may be called with the card open or - closed. */ -static struct net_device_stats *net_get_stats(struct net_device *dev) -{ - struct net_local *lp = dev->priv; - return &lp->stats; -} - -/* Set or clear the multicast filter for this adaptor. - num_addrs == -1 Promiscuous mode, receive all packets - num_addrs == 0 Normal mode, clear multicast list - num_addrs > 0 Multicast mode, receive normal and MC packets, and do - best-effort filtering. - */ - -static void set_multicast_list(struct net_device *dev) -{ - short ioaddr = dev->base_addr; - if (dev->mc_count || dev->flags&(IFF_PROMISC|IFF_ALLMULTI)) - { - /* - * We must make the kernel realise we had to move - * into promisc mode or we start all out war on - * the cable. - AC - */ - dev->flags|=IFF_PROMISC; - - outb(3, ioaddr + RX_MODE); /* Enable promiscuous mode */ - } - else - outb(2, ioaddr + RX_MODE); /* Disable promiscuous, use normal mode */ -} - -#ifdef MODULE -static struct net_device *dev_fmv18x; - -MODULE_PARM(io, "i"); -MODULE_PARM(irq, "i"); -MODULE_PARM(net_debug, "i"); -MODULE_PARM_DESC(io, "FMV-18X I/O address"); -MODULE_PARM_DESC(irq, "FMV-18X IRQ number"); -MODULE_PARM_DESC(net_debug, "FMV-18X debug level (0-1,5-6)"); -MODULE_LICENSE("GPL"); - -int init_module(void) -{ - if (io == 0) - printk("fmv18x: You should not use auto-probing with insmod!\n"); - dev_fmv18x = fmv18x_probe(-1); - if (IS_ERR(dev_fmv18x)) - return PTR_ERR(dev_fmv18x); - return 0; -} - -void -cleanup_module(void) -{ - unregister_netdev(dev_fmv18x); - free_irq(dev_fmv18x->irq, dev_fmv18x); - release_region(dev_fmv18x->base_addr, FMV18X_IO_EXTENT); - free_netdev(dev_fmv18x); -} -#endif /* MODULE */ - -/* - * Local variables: - * compile-command: "gcc -D__KERNEL__ -I/usr/src/linux/net/inet -Wall -Wstrict-prototypes -O6 -m486 -c fmv18x.c" - * version-control: t - * kept-new-versions: 5 - * tab-width: 4 - * c-indent-level: 4 - * End: - */ diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index cda48c5d72a..4ebcd052e15 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -81,6 +81,7 @@ * cause DMA to kfree'd memory. * 0.31: 14 Nov 2004: ethtool support for getting/setting link * capabilities. + * 0.32: 16 Apr 2005: RX_ERROR4 handling added. * * Known bugs: * We suspect that on some hardware no TX done interrupts are generated. @@ -92,7 +93,7 @@ * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few * superfluous timer interrupts from the nic. */ -#define FORCEDETH_VERSION "0.31" +#define FORCEDETH_VERSION "0.32" #define DRV_NAME "forcedeth" #include <linux/module.h> @@ -109,6 +110,7 @@ #include <linux/mii.h> #include <linux/random.h> #include <linux/init.h> +#include <linux/if_vlan.h> #include <asm/irq.h> #include <asm/io.h> @@ -1013,6 +1015,59 @@ static void nv_tx_timeout(struct net_device *dev) spin_unlock_irq(&np->lock); } +/* + * Called when the nic notices a mismatch between the actual data len on the + * wire and the len indicated in the 802 header + */ +static int nv_getlen(struct net_device *dev, void *packet, int datalen) +{ + int hdrlen; /* length of the 802 header */ + int protolen; /* length as stored in the proto field */ + + /* 1) calculate len according to header */ + if ( ((struct vlan_ethhdr *)packet)->h_vlan_proto == __constant_htons(ETH_P_8021Q)) { + protolen = ntohs( ((struct vlan_ethhdr *)packet)->h_vlan_encapsulated_proto ); + hdrlen = VLAN_HLEN; + } else { + protolen = ntohs( ((struct ethhdr *)packet)->h_proto); + hdrlen = ETH_HLEN; + } + dprintk(KERN_DEBUG "%s: nv_getlen: datalen %d, protolen %d, hdrlen %d\n", + dev->name, datalen, protolen, hdrlen); + if (protolen > ETH_DATA_LEN) + return datalen; /* Value in proto field not a len, no checks possible */ + + protolen += hdrlen; + /* consistency checks: */ + if (datalen > ETH_ZLEN) { + if (datalen >= protolen) { + /* more data on wire than in 802 header, trim of + * additional data. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, protolen); + return protolen; + } else { + /* less data on wire than mentioned in header. + * Discard the packet. + */ + dprintk(KERN_DEBUG "%s: nv_getlen: discarding long packet.\n", + dev->name); + return -1; + } + } else { + /* short packet. Accept only if 802 values are also short */ + if (protolen > ETH_ZLEN) { + dprintk(KERN_DEBUG "%s: nv_getlen: discarding short packet.\n", + dev->name); + return -1; + } + dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n", + dev->name, datalen); + return datalen; + } +} + static void nv_rx_process(struct net_device *dev) { struct fe_priv *np = get_nvpriv(dev); @@ -1064,7 +1119,7 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3|NV_RX_ERROR4)) { + if (Flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1078,22 +1133,24 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX_FRAMINGERR) { - if (Flags & NV_RX_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors. */ + if (Flags & NV_RX_FRAMINGERR) { + if (Flags & NV_RX_SUBSTRACT1) { + len--; + } + } } else { if (!(Flags & NV_RX2_DESCRIPTORVALID)) goto next_pkt; - if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3|NV_RX2_ERROR4)) { + if (Flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) { np->stats.rx_errors++; goto next_pkt; } @@ -1107,17 +1164,19 @@ static void nv_rx_process(struct net_device *dev) np->stats.rx_errors++; goto next_pkt; } - if (Flags & NV_RX2_ERROR) { - /* framing errors are soft errors, the rest is fatal. */ - if (Flags & NV_RX2_FRAMINGERR) { - if (Flags & NV_RX2_SUBSTRACT1) { - len--; - } - } else { + if (Flags & NV_RX2_ERROR4) { + len = nv_getlen(dev, np->rx_skbuff[i]->data, len); + if (len < 0) { np->stats.rx_errors++; goto next_pkt; } } + /* framing errors are soft errors */ + if (Flags & NV_RX2_FRAMINGERR) { + if (Flags & NV_RX2_SUBSTRACT1) { + len--; + } + } Flags &= NV_RX2_CHECKSUMMASK; if (Flags == NV_RX2_CHECKSUMOK1 || Flags == NV_RX2_CHECKSUMOK2 || @@ -1480,6 +1539,13 @@ static void nv_do_nic_poll(unsigned long data) enable_irq(dev->irq); } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void nv_poll_controller(struct net_device *dev) +{ + nv_do_nic_poll((unsigned long) dev); +} +#endif + static void nv_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) { struct fe_priv *np = get_nvpriv(dev); @@ -1962,6 +2028,9 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i dev->get_stats = nv_get_stats; dev->change_mtu = nv_change_mtu; dev->set_multicast_list = nv_set_multicast; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = nv_poll_controller; +#endif SET_ETHTOOL_OPS(dev, &ops); dev->tx_timeout = nv_tx_timeout; dev->watchdog_timeo = NV_WATCHDOG_TIMEO; diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c index 89454915b85..e44f8e9055e 100644 --- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -848,7 +848,7 @@ static void __exit sixpack_exit_driver(void) { int ret; - if ((ret = tty_register_ldisc(N_6PACK, NULL))) + if ((ret = tty_unregister_ldisc(N_6PACK))) printk(msg_unregfail, ret); } diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index 1c563f905a5..a7f15d9f13e 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -374,29 +374,6 @@ static inline void do_kiss_params(struct baycom_state *bc, } /* --------------------------------------------------------------------- */ -/* - * high performance HDLC encoder - * yes, it's ugly, but generates pretty good code - */ - -#define ENCODEITERA(j) \ -({ \ - if (!(notbitstream & (0x1f0 << j))) \ - goto stuff##j; \ - encodeend##j: ; \ -}) - -#define ENCODEITERB(j) \ -({ \ - stuff##j: \ - bitstream &= ~(0x100 << j); \ - bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | \ - ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); \ - numbit++; \ - notbitstream = ~bitstream; \ - goto encodeend##j; \ -}) - static void encode_hdlc(struct baycom_state *bc) { @@ -405,6 +382,7 @@ static void encode_hdlc(struct baycom_state *bc) int pkt_len; unsigned bitstream, notbitstream, bitbuf, numbit, crc; unsigned char crcarr[2]; + int j; if (bc->hdlctx.bufcnt > 0) return; @@ -429,24 +407,14 @@ static void encode_hdlc(struct baycom_state *bc) pkt_len--; if (!pkt_len) bp = crcarr; - ENCODEITERA(0); - ENCODEITERA(1); - ENCODEITERA(2); - ENCODEITERA(3); - ENCODEITERA(4); - ENCODEITERA(5); - ENCODEITERA(6); - ENCODEITERA(7); - goto enditer; - ENCODEITERB(0); - ENCODEITERB(1); - ENCODEITERB(2); - ENCODEITERB(3); - ENCODEITERB(4); - ENCODEITERB(5); - ENCODEITERB(6); - ENCODEITERB(7); - enditer: + for (j = 0; j < 8; j++) + if (unlikely(!(notbitstream & (0x1f0 << j)))) { + bitstream &= ~(0x100 << j); + bitbuf = (bitbuf & (((2 << j) << numbit) - 1)) | + ((bitbuf & ~(((2 << j) << numbit) - 1)) << 1); + numbit++; + notbitstream = ~bitstream; + } numbit += 8; while (numbit >= 8) { *wp++ = bitbuf; @@ -610,37 +578,6 @@ static void do_rxpacket(struct net_device *dev) bc->stats.rx_packets++; } -#define DECODEITERA(j) \ -({ \ - if (!(notbitstream & (0x0fc << j))) /* flag or abort */ \ - goto flgabrt##j; \ - if ((bitstream & (0x1f8 << j)) == (0xf8 << j)) /* stuffed bit */ \ - goto stuff##j; \ - enditer##j: ; \ -}) - -#define DECODEITERB(j) \ -({ \ - flgabrt##j: \ - if (!(notbitstream & (0x1fc << j))) { /* abort received */ \ - state = 0; \ - goto enditer##j; \ - } \ - if ((bitstream & (0x1fe << j)) != (0x0fc << j)) /* flag received */ \ - goto enditer##j; \ - if (state) \ - do_rxpacket(dev); \ - bc->hdlcrx.bufcnt = 0; \ - bc->hdlcrx.bufptr = bc->hdlcrx.buf; \ - state = 1; \ - numbits = 7-j; \ - goto enditer##j; \ - stuff##j: \ - numbits--; \ - bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); \ - goto enditer##j; \ -}) - static int receive(struct net_device *dev, int cnt) { struct baycom_state *bc = netdev_priv(dev); @@ -649,6 +586,7 @@ static int receive(struct net_device *dev, int cnt) unsigned char tmp[128]; unsigned char *cp; int cnt2, ret = 0; + int j; numbits = bc->hdlcrx.numbits; state = bc->hdlcrx.state; @@ -669,24 +607,32 @@ static int receive(struct net_device *dev, int cnt) bitbuf |= (*cp) << 8; numbits += 8; notbitstream = ~bitstream; - DECODEITERA(0); - DECODEITERA(1); - DECODEITERA(2); - DECODEITERA(3); - DECODEITERA(4); - DECODEITERA(5); - DECODEITERA(6); - DECODEITERA(7); - goto enddec; - DECODEITERB(0); - DECODEITERB(1); - DECODEITERB(2); - DECODEITERB(3); - DECODEITERB(4); - DECODEITERB(5); - DECODEITERB(6); - DECODEITERB(7); - enddec: + for (j = 0; j < 8; j++) { + + /* flag or abort */ + if (unlikely(!(notbitstream & (0x0fc << j)))) { + + /* abort received */ + if (!(notbitstream & (0x1fc << j))) + state = 0; + + /* not flag received */ + else if (!(bitstream & (0x1fe << j)) != (0x0fc << j)) { + if (state) + do_rxpacket(dev); + bc->hdlcrx.bufcnt = 0; + bc->hdlcrx.bufptr = bc->hdlcrx.buf; + state = 1; + numbits = 7-j; + } + } + + /* stuffed bit */ + else if (unlikely((bitstream & (0x1f8 << j)) == (0xf8 << j))) { + numbits--; + bitbuf = (bitbuf & ((~0xff) << j)) | ((bitbuf & ~((~0xff) << j)) << 1); + } + } while (state && numbits >= 8) { if (bc->hdlcrx.bufcnt >= TXBUFFER_SIZE) { state = 0; diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c index 62790511098..3035422f5ad 100644 --- a/drivers/net/hamradio/mkiss.c +++ b/drivers/net/hamradio/mkiss.c @@ -934,7 +934,7 @@ static void __exit mkiss_exit_driver(void) kfree(ax25_ctrls); ax25_ctrls = NULL; - if ((i = tty_register_ldisc(N_AX25, NULL))) + if ((i = tty_unregister_ldisc(N_AX25))) printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i); } diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c index ab44358ddbf..6482d994d48 100644 --- a/drivers/net/ibm_emac/ibm_emac_core.c +++ b/drivers/net/ibm_emac/ibm_emac_core.c @@ -1595,7 +1595,7 @@ static struct ethtool_ops emac_ethtool_ops = { static int emac_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { struct ocp_enet_private *fep = dev->priv; - uint *data = (uint *) & rq->ifr_ifru; + uint16_t *data = (uint16_t *) & rq->ifr_ifru; switch (cmd) { case SIOCGMIIPHY: diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 1c553d7efdd..ca5914091d3 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -389,7 +389,7 @@ config VIA_FIR help Say Y here if you want to build support for the VIA VT8231 and VIA VT1211 IrDA controllers, found on the motherboards using - those those VIA chipsets. To use this controller, you will need + those VIA chipsets. To use this controller, you will need to plug a specific 5 pins FIR IrDA dongle in the specific motherboard connector. The driver provides support for SIR, MIR and FIR (4Mbps) speeds. diff --git a/drivers/net/irda/irtty-sir.c b/drivers/net/irda/irtty-sir.c index 7d23aa37590..b8d112348ba 100644 --- a/drivers/net/irda/irtty-sir.c +++ b/drivers/net/irda/irtty-sir.c @@ -626,7 +626,7 @@ static void __exit irtty_sir_cleanup(void) { int err; - if ((err = tty_register_ldisc(N_IRDA, NULL))) { + if ((err = tty_unregister_ldisc(N_IRDA))) { IRDA_ERROR("%s(), can't unregister line discipline (err = %d)\n", __FUNCTION__, err); } diff --git a/drivers/net/irda/sir_kthread.c b/drivers/net/irda/sir_kthread.c index 18cea109953..c65054364bc 100644 --- a/drivers/net/irda/sir_kthread.c +++ b/drivers/net/irda/sir_kthread.c @@ -135,8 +135,7 @@ static int irda_thread(void *startup) remove_wait_queue(&irda_rq_queue.kick, &wait); /* make swsusp happy with our thread */ - if (current->flags & PF_FREEZE) - refrigerator(PF_FREEZE); + try_to_freeze(); run_irda_queue(); } diff --git a/drivers/net/irda/stir4200.c b/drivers/net/irda/stir4200.c index 66f488c1371..15f207323d9 100644 --- a/drivers/net/irda/stir4200.c +++ b/drivers/net/irda/stir4200.c @@ -763,7 +763,7 @@ static int stir_transmit_thread(void *arg) { #ifdef CONFIG_PM /* if suspending, then power off and wait */ - if (unlikely(current->flags & PF_FREEZE)) { + if (unlikely(freezing(current))) { if (stir->receiving) receive_stop(stir); else @@ -771,7 +771,7 @@ static int stir_transmit_thread(void *arg) write_reg(stir, REG_CTRL1, CTRL1_TXPWD|CTRL1_RXPWD); - refrigerator(PF_FREEZE); + refrigerator(); if (change_speed(stir, stir->speed)) break; diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c index 855f8b2cf13..55af32e9bf0 100644 --- a/drivers/net/iseries_veth.c +++ b/drivers/net/iseries_veth.c @@ -802,13 +802,14 @@ static void veth_tx_timeout(struct net_device *dev) spin_lock_irqsave(&port->pending_gate, flags); + if (!port->pending_lpmask) { + spin_unlock_irqrestore(&port->pending_gate, flags); + return; + } + printk(KERN_WARNING "%s: Tx timeout! Resetting lp connections: %08x\n", dev->name, port->pending_lpmask); - /* If we've timed out the queue must be stopped, which should - * only ever happen when there is a pending packet. */ - WARN_ON(! port->pending_lpmask); - for (i = 0; i < HVMAXARCHITECTEDLPS; i++) { struct veth_lpar_connection *cnx = veth_cnx[i]; @@ -924,7 +925,7 @@ static int veth_transmit_to_one(struct sk_buff *skb, HvLpIndex rlp, spin_lock_irqsave(&cnx->lock, flags); - if (! cnx->state & VETH_STATE_READY) + if (! (cnx->state & VETH_STATE_READY)) goto drop; if ((skb->len - 14) > VETH_MAX_MTU) @@ -1023,6 +1024,8 @@ static int veth_start_xmit(struct sk_buff *skb, struct net_device *dev) lpmask = veth_transmit_to_many(skb, lpmask, dev); + dev->trans_start = jiffies; + if (! lpmask) { dev_kfree_skb(skb); } else { @@ -1262,13 +1265,18 @@ static void veth_receive(struct veth_lpar_connection *cnx, vlan = skb->data[9]; dev = veth_dev[vlan]; - if (! dev) - /* Some earlier versions of the driver sent - broadcasts down all connections, even to - lpars that weren't on the relevant vlan. - So ignore packets belonging to a vlan we're - not on. */ + if (! dev) { + /* + * Some earlier versions of the driver sent + * broadcasts down all connections, even to lpars + * that weren't on the relevant vlan. So ignore + * packets belonging to a vlan we're not on. + * We can also be here if we receive packets while + * the driver is going down, because then dev is NULL. + */ + dev_kfree_skb_irq(skb); continue; + } port = (struct veth_port *)dev->priv; dest = *((u64 *) skb->data) & 0xFFFFFFFFFFFF0000; @@ -1381,18 +1389,25 @@ void __exit veth_module_cleanup(void) { int i; - vio_unregister_driver(&veth_driver); + /* Stop the queues first to stop any new packets being sent. */ + for (i = 0; i < HVMAXARCHITECTEDVIRTUALLANS; i++) + if (veth_dev[i]) + netif_stop_queue(veth_dev[i]); + /* Stop the connections before we unregister the driver. This + * ensures there's no skbs lying around holding the device open. */ for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_stop_connection(i); HvLpEvent_unregisterHandler(HvLpEvent_Type_VirtualLan); /* Hypervisor callbacks may have scheduled more work while we - * were destroying connections. Now that we've disconnected from + * were stoping connections. Now that we've disconnected from * the hypervisor make sure everything's finished. */ flush_scheduled_work(); + vio_unregister_driver(&veth_driver); + for (i = 0; i < HVMAXARCHITECTEDLPS; ++i) veth_destroy_connection(i); diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h index 26c4f15f7fc..f8d3385c784 100644 --- a/drivers/net/ixgb/ixgb.h +++ b/drivers/net/ixgb/ixgb.h @@ -110,7 +110,7 @@ struct ixgb_adapter; #define IXGB_TX_QUEUE_WAKE 16 /* How many Rx Buffers do we bundle into one write to the hardware ? */ -#define IXGB_RX_BUFFER_WRITE 16 /* Must be power of 2 */ +#define IXGB_RX_BUFFER_WRITE 4 /* Must be power of 2 */ /* only works for sizes that are powers of 2 */ #define IXGB_ROUNDUP(i, size) ((i) = (((i) + (size) - 1) & ~((size) - 1))) diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c index 653e99f919c..3aae110c556 100644 --- a/drivers/net/ixgb/ixgb_ee.c +++ b/drivers/net/ixgb/ixgb_ee.c @@ -411,7 +411,7 @@ ixgb_write_eeprom(struct ixgb_hw *hw, uint16_t offset, uint16_t data) ixgb_cleanup_eeprom(hw); /* clear the init_ctrl_reg_1 to signify that the cache is invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return; } @@ -483,7 +483,7 @@ ixgb_get_eeprom_data(struct ixgb_hw *hw) DEBUGOUT("ixgb_ee: Checksum invalid.\n"); /* clear the init_ctrl_reg_1 to signify that the cache is * invalidated */ - ee_map->init_ctrl_reg_1 = EEPROM_ICW1_SIGNATURE_CLEAR; + ee_map->init_ctrl_reg_1 = le16_to_cpu(EEPROM_ICW1_SIGNATURE_CLEAR); return (FALSE); } @@ -579,7 +579,7 @@ ixgb_get_ee_compatibility(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->compatibility); + return (le16_to_cpu(ee_map->compatibility)); return(0); } @@ -616,7 +616,7 @@ ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_1); + return (le16_to_cpu(ee_map->init_ctrl_reg_1)); return(0); } @@ -635,7 +635,7 @@ ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->init_ctrl_reg_2); + return (le16_to_cpu(ee_map->init_ctrl_reg_2)); return(0); } @@ -654,7 +654,7 @@ ixgb_get_ee_subsystem_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subsystem_id); + return (le16_to_cpu(ee_map->subsystem_id)); return(0); } @@ -673,7 +673,7 @@ ixgb_get_ee_subvendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->subvendor_id); + return (le16_to_cpu(ee_map->subvendor_id)); return(0); } @@ -692,7 +692,7 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->device_id); + return (le16_to_cpu(ee_map->device_id)); return(0); } @@ -711,7 +711,7 @@ ixgb_get_ee_vendor_id(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->vendor_id); + return (le16_to_cpu(ee_map->vendor_id)); return(0); } @@ -730,7 +730,7 @@ ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->swdpins_reg); + return (le16_to_cpu(ee_map->swdpins_reg)); return(0); } @@ -749,7 +749,7 @@ ixgb_get_ee_d3_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d3_power); + return (le16_to_cpu(ee_map->d3_power)); return(0); } @@ -768,7 +768,7 @@ ixgb_get_ee_d0_power(struct ixgb_hw *hw) struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom; if(ixgb_check_and_get_eeprom_data(hw) == TRUE) - return(ee_map->d0_power); + return (le16_to_cpu(ee_map->d0_power)); return(0); } diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c index aea10e8aaa7..3fa113854ee 100644 --- a/drivers/net/ixgb/ixgb_ethtool.c +++ b/drivers/net/ixgb/ixgb_ethtool.c @@ -252,7 +252,9 @@ ixgb_get_regs(struct net_device *netdev, uint32_t *reg_start = reg; uint8_t i; - regs->version = (adapter->hw.device_id << 16) | adapter->hw.subsystem_id; + /* the 1 (one) below indicates an attempt at versioning, if the + * interface in ethtool or the driver this 1 should be incremented */ + regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id; /* General Registers */ *reg++ = IXGB_READ_REG(hw, CTRL0); /* 0 */ diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c index a6af9d9e340..097b90ccf57 100644 --- a/drivers/net/ixgb/ixgb_main.c +++ b/drivers/net/ixgb/ixgb_main.c @@ -47,7 +47,8 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver"; #else #define DRIVERNAPI "-NAPI" #endif -#define DRV_VERSION "1.0.90-k2"DRIVERNAPI + +#define DRV_VERSION "1.0.95-k2"DRIVERNAPI char ixgb_driver_version[] = DRV_VERSION; char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation."; @@ -104,6 +105,7 @@ static int ixgb_change_mtu(struct net_device *netdev, int new_mtu); static int ixgb_set_mac(struct net_device *netdev, void *p); static irqreturn_t ixgb_intr(int irq, void *data, struct pt_regs *regs); static boolean_t ixgb_clean_tx_irq(struct ixgb_adapter *adapter); + #ifdef CONFIG_IXGB_NAPI static int ixgb_clean(struct net_device *netdev, int *budget); static boolean_t ixgb_clean_rx_irq(struct ixgb_adapter *adapter, @@ -121,33 +123,20 @@ static void ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid); static void ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid); static void ixgb_restore_vlan(struct ixgb_adapter *adapter); -static int ixgb_notify_reboot(struct notifier_block *, unsigned long event, - void *ptr); -static int ixgb_suspend(struct pci_dev *pdev, uint32_t state); - #ifdef CONFIG_NET_POLL_CONTROLLER /* for netdump / net console */ static void ixgb_netpoll(struct net_device *dev); #endif -struct notifier_block ixgb_notifier_reboot = { - .notifier_call = ixgb_notify_reboot, - .next = NULL, - .priority = 0 -}; - /* Exported from other modules */ extern void ixgb_check_options(struct ixgb_adapter *adapter); static struct pci_driver ixgb_driver = { - .name = ixgb_driver_name, + .name = ixgb_driver_name, .id_table = ixgb_pci_tbl, - .probe = ixgb_probe, - .remove = __devexit_p(ixgb_remove), - /* Power Managment Hooks */ - .suspend = NULL, - .resume = NULL + .probe = ixgb_probe, + .remove = __devexit_p(ixgb_remove), }; MODULE_AUTHOR("Intel Corporation, <linux.nics@intel.com>"); @@ -171,17 +160,12 @@ MODULE_VERSION(DRV_VERSION); static int __init ixgb_init_module(void) { - int ret; printk(KERN_INFO "%s - version %s\n", ixgb_driver_string, ixgb_driver_version); printk(KERN_INFO "%s\n", ixgb_copyright); - ret = pci_module_init(&ixgb_driver); - if(ret >= 0) { - register_reboot_notifier(&ixgb_notifier_reboot); - } - return ret; + return pci_module_init(&ixgb_driver); } module_init(ixgb_init_module); @@ -196,7 +180,6 @@ module_init(ixgb_init_module); static void __exit ixgb_exit_module(void) { - unregister_reboot_notifier(&ixgb_notifier_reboot); pci_unregister_driver(&ixgb_driver); } @@ -226,8 +209,8 @@ ixgb_irq_enable(struct ixgb_adapter *adapter) { if(atomic_dec_and_test(&adapter->irq_sem)) { IXGB_WRITE_REG(&adapter->hw, IMS, - IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | - IXGB_INT_RXO | IXGB_INT_LSC); + IXGB_INT_RXT0 | IXGB_INT_RXDMT0 | IXGB_INT_TXDW | + IXGB_INT_LSC); IXGB_WRITE_FLUSH(&adapter->hw); } } @@ -1211,10 +1194,10 @@ ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb) | IXGB_CONTEXT_DESC_CMD_TSE | IXGB_CONTEXT_DESC_CMD_IP | IXGB_CONTEXT_DESC_CMD_TCP - | IXGB_CONTEXT_DESC_CMD_RS | IXGB_CONTEXT_DESC_CMD_IDE | (skb->len - (hdr_len))); + if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; @@ -1249,8 +1232,7 @@ ixgb_tx_csum(struct ixgb_adapter *adapter, struct sk_buff *skb) context_desc->mss = 0; context_desc->cmd_type_len = cpu_to_le32(IXGB_CONTEXT_DESC_TYPE - | IXGB_TX_DESC_CMD_RS - | IXGB_TX_DESC_CMD_IDE); + | IXGB_TX_DESC_CMD_IDE); if(++i == adapter->tx_ring.count) i = 0; adapter->tx_ring.next_to_use = i; @@ -1275,6 +1257,7 @@ ixgb_tx_map(struct ixgb_adapter *adapter, struct sk_buff *skb, unsigned int nr_frags = skb_shinfo(skb)->nr_frags; unsigned int f; + len -= skb->data_len; i = tx_ring->next_to_use; @@ -1528,14 +1511,33 @@ ixgb_change_mtu(struct net_device *netdev, int new_mtu) void ixgb_update_stats(struct ixgb_adapter *adapter) { + struct net_device *netdev = adapter->netdev; + + if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) || + (netdev->mc_count > IXGB_MAX_NUM_MULTICAST_ADDRESSES)) { + u64 multi = IXGB_READ_REG(&adapter->hw, MPRCL); + u32 bcast_l = IXGB_READ_REG(&adapter->hw, BPRCL); + u32 bcast_h = IXGB_READ_REG(&adapter->hw, BPRCH); + u64 bcast = ((u64)bcast_h << 32) | bcast_l; + + multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32); + /* fix up multicast stats by removing broadcasts */ + multi -= bcast; + + adapter->stats.mprcl += (multi & 0xFFFFFFFF); + adapter->stats.mprch += (multi >> 32); + adapter->stats.bprcl += bcast_l; + adapter->stats.bprch += bcast_h; + } else { + adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); + adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); + adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); + adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); + } adapter->stats.tprl += IXGB_READ_REG(&adapter->hw, TPRL); adapter->stats.tprh += IXGB_READ_REG(&adapter->hw, TPRH); adapter->stats.gprcl += IXGB_READ_REG(&adapter->hw, GPRCL); adapter->stats.gprch += IXGB_READ_REG(&adapter->hw, GPRCH); - adapter->stats.bprcl += IXGB_READ_REG(&adapter->hw, BPRCL); - adapter->stats.bprch += IXGB_READ_REG(&adapter->hw, BPRCH); - adapter->stats.mprcl += IXGB_READ_REG(&adapter->hw, MPRCL); - adapter->stats.mprch += IXGB_READ_REG(&adapter->hw, MPRCH); adapter->stats.uprcl += IXGB_READ_REG(&adapter->hw, UPRCL); adapter->stats.uprch += IXGB_READ_REG(&adapter->hw, UPRCH); adapter->stats.vprcl += IXGB_READ_REG(&adapter->hw, VPRCL); @@ -1825,7 +1827,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) struct pci_dev *pdev = adapter->pdev; struct ixgb_rx_desc *rx_desc, *next_rxd; struct ixgb_buffer *buffer_info, *next_buffer, *next2_buffer; - struct sk_buff *skb, *next_skb; uint32_t length; unsigned int i, j; boolean_t cleaned = FALSE; @@ -1835,6 +1836,8 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) buffer_info = &rx_ring->buffer_info[i]; while(rx_desc->status & IXGB_RX_DESC_STATUS_DD) { + struct sk_buff *skb, *next_skb; + u8 status; #ifdef CONFIG_IXGB_NAPI if(*work_done >= work_to_do) @@ -1842,7 +1845,9 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) (*work_done)++; #endif + status = rx_desc->status; skb = buffer_info->skb; + prefetch(skb->data); if(++i == rx_ring->count) i = 0; @@ -1857,7 +1862,6 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) next_skb = next_buffer->skb; prefetch(next_skb); - cleaned = TRUE; pci_unmap_single(pdev, @@ -1867,7 +1871,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) length = le16_to_cpu(rx_desc->length); - if(unlikely(!(rx_desc->status & IXGB_RX_DESC_STATUS_EOP))) { + if(unlikely(!(status & IXGB_RX_DESC_STATUS_EOP))) { /* All receives must fit into a single buffer */ @@ -1875,12 +1879,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) "length<%x>\n", length); dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } if (unlikely(rx_desc->errors @@ -1889,12 +1888,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) IXGB_RX_DESC_ERRORS_RXE))) { dev_kfree_skb_irq(skb); - rx_desc->status = 0; - buffer_info->skb = NULL; - - rx_desc = next_rxd; - buffer_info = next_buffer; - continue; + goto rxdesc_done; } /* Good Receive */ @@ -1905,7 +1899,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) skb->protocol = eth_type_trans(skb, netdev); #ifdef CONFIG_IXGB_NAPI - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_receive_skb(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1913,7 +1907,7 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) netif_receive_skb(skb); } #else /* CONFIG_IXGB_NAPI */ - if(adapter->vlgrp && (rx_desc->status & IXGB_RX_DESC_STATUS_VP)) { + if(adapter->vlgrp && (status & IXGB_RX_DESC_STATUS_VP)) { vlan_hwaccel_rx(skb, adapter->vlgrp, le16_to_cpu(rx_desc->special) & IXGB_RX_DESC_SPECIAL_VLAN_MASK); @@ -1923,9 +1917,12 @@ ixgb_clean_rx_irq(struct ixgb_adapter *adapter) #endif /* CONFIG_IXGB_NAPI */ netdev->last_rx = jiffies; +rxdesc_done: + /* clean up descriptor, might be written over by hw */ rx_desc->status = 0; buffer_info->skb = NULL; + /* use prefetched values */ rx_desc = next_rxd; buffer_info = next_buffer; } @@ -1961,8 +1958,8 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) num_group_tail_writes = IXGB_RX_BUFFER_WRITE; - /* leave one descriptor unused */ - while(--cleancount > 0) { + /* leave three descriptors unused */ + while(--cleancount > 2) { rx_desc = IXGB_RX_DESC(*rx_ring, i); skb = dev_alloc_skb(adapter->rx_buffer_len + NET_IP_ALIGN); @@ -1989,6 +1986,10 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter) PCI_DMA_FROMDEVICE); rx_desc->buff_addr = cpu_to_le64(buffer_info->dma); + /* guarantee DD bit not set now before h/w gets descriptor + * this is the rest of the workaround for h/w double + * writeback. */ + rx_desc->status = 0; if((i & ~(num_group_tail_writes- 1)) == i) { /* Force memory writes to complete before letting h/w @@ -2101,54 +2102,6 @@ ixgb_restore_vlan(struct ixgb_adapter *adapter) } } -/** - * ixgb_notify_reboot - handles OS notification of reboot event. - * @param nb notifier block, unused - * @param event Event being passed to driver to act upon - * @param p A pointer to our net device - **/ -static int -ixgb_notify_reboot(struct notifier_block *nb, unsigned long event, void *p) -{ - struct pci_dev *pdev = NULL; - - switch(event) { - case SYS_DOWN: - case SYS_HALT: - case SYS_POWER_OFF: - while ((pdev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, pdev))) { - if (pci_dev_driver(pdev) == &ixgb_driver) - ixgb_suspend(pdev, 3); - } - } - return NOTIFY_DONE; -} - -/** - * ixgb_suspend - driver suspend function called from notify. - * @param pdev pci driver structure used for passing to - * @param state power state to enter - **/ -static int -ixgb_suspend(struct pci_dev *pdev, uint32_t state) -{ - struct net_device *netdev = pci_get_drvdata(pdev); - struct ixgb_adapter *adapter = netdev->priv; - - netif_device_detach(netdev); - - if(netif_running(netdev)) - ixgb_down(adapter, TRUE); - - pci_save_state(pdev); - - state = (state > 0) ? 3 : 0; - pci_set_power_state(pdev, state); - msec_delay(200); - - return 0; -} - #ifdef CONFIG_NET_POLL_CONTROLLER /* * Polling 'interrupt' - used by things like netconsole to send skbs @@ -2159,6 +2112,7 @@ ixgb_suspend(struct pci_dev *pdev, uint32_t state) static void ixgb_netpoll(struct net_device *dev) { struct ixgb_adapter *adapter = dev->priv; + disable_irq(adapter->pdev->irq); ixgb_intr(adapter->pdev->irq, dev, NULL); enable_irq(adapter->pdev->irq); diff --git a/drivers/net/ixgb/ixgb_osdep.h b/drivers/net/ixgb/ixgb_osdep.h index 9eba9289190..dba20481ee8 100644 --- a/drivers/net/ixgb/ixgb_osdep.h +++ b/drivers/net/ixgb/ixgb_osdep.h @@ -45,8 +45,7 @@ /* Don't mdelay in interrupt context! */ \ BUG(); \ } else { \ - set_current_state(TASK_UNINTERRUPTIBLE); \ - schedule_timeout((x * HZ)/1000 + 2); \ + msleep(x); \ } } while(0) #endif diff --git a/drivers/net/natsemi.c b/drivers/net/natsemi.c index 223bdadd4c0..babb59e146e 100644 --- a/drivers/net/natsemi.c +++ b/drivers/net/natsemi.c @@ -2433,9 +2433,9 @@ static void __set_rx_mode(struct net_device *dev) rx_mode = RxFilterEnable | AcceptBroadcast | AcceptMulticast | AcceptMyPhys; for (i = 0; i < 64; i += 2) { - writew(HASH_TABLE + i, ioaddr + RxFilterAddr); - writew((mc_filter[i+1]<<8) + mc_filter[i], - ioaddr + RxFilterData); + writel(HASH_TABLE + i, ioaddr + RxFilterAddr); + writel((mc_filter[i + 1] << 8) + mc_filter[i], + ioaddr + RxFilterData); } } writel(rx_mode, ioaddr + RxFilterAddr); diff --git a/drivers/net/ns83820.c b/drivers/net/ns83820.c index 2fcc181a862..c336b46bd33 100644 --- a/drivers/net/ns83820.c +++ b/drivers/net/ns83820.c @@ -1,4 +1,4 @@ -#define _VERSION "0.20" +#define VERSION "0.22" /* ns83820.c by Benjamin LaHaise with contributions. * * Questions/comments/discussion to linux-ns83820@kvack.org. @@ -63,9 +63,11 @@ * - fix missed txok introduced during performance * tuning * 0.20 - fix stupid RFEN thinko. i am such a smurf. - * * 20040828 0.21 - add hardware vlan accleration * by Neil Horman <nhorman@redhat.com> + * 20050406 0.22 - improved DAC ifdefs from Andi Kleen + * - removal of dead code from Adrian Bunk + * - fix half duplex collision behaviour * Driver Overview * =============== * @@ -129,18 +131,6 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #undef Dprintk #define Dprintk dprintk -#if defined(CONFIG_HIGHMEM64G) || defined(__ia64__) -#define USE_64BIT_ADDR "+" -#endif - -#if defined(USE_64BIT_ADDR) -#define VERSION _VERSION USE_64BIT_ADDR -#define TRY_DAC 1 -#else -#define VERSION _VERSION -#define TRY_DAC 0 -#endif - /* tunables */ #define RX_BUF_SIZE 1500 /* 8192 */ #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) @@ -386,22 +376,16 @@ static int lnksts = 0; /* CFG_LNKSTS bit polarity */ #define LINK_DOWN 0x02 #define LINK_UP 0x04 -#ifdef USE_64BIT_ADDR -#define HW_ADDR_LEN 8 +#define HW_ADDR_LEN sizeof(dma_addr_t) #define desc_addr_set(desc, addr) \ do { \ - u64 __addr = (addr); \ - (desc)[0] = cpu_to_le32(__addr); \ - (desc)[1] = cpu_to_le32(__addr >> 32); \ + ((desc)[0] = cpu_to_le32(addr)); \ + if (HW_ADDR_LEN == 8) \ + (desc)[1] = cpu_to_le32(((u64)addr) >> 32); \ } while(0) #define desc_addr_get(desc) \ - (((u64)le32_to_cpu((desc)[1]) << 32) \ - | le32_to_cpu((desc)[0])) -#else -#define HW_ADDR_LEN 4 -#define desc_addr_set(desc, addr) ((desc)[0] = cpu_to_le32(addr)) -#define desc_addr_get(desc) (le32_to_cpu((desc)[0])) -#endif + (le32_to_cpu((desc)[0]) | \ + (HW_ADDR_LEN == 8 ? ((dma_addr_t)le32_to_cpu((desc)[1]))<<32 : 0)) #define DESC_LINK 0 #define DESC_BUFPTR (DESC_LINK + HW_ADDR_LEN/4) @@ -727,11 +711,23 @@ static void fastcall phy_intr(struct net_device *ndev) speed = ((cfg / CFG_SPDSTS0) & 3); fullduplex = (cfg & CFG_DUPSTS); - if (fullduplex) + if (fullduplex) { new_cfg |= CFG_SB; + writel(readl(dev->base + TXCFG) + | TXCFG_CSI | TXCFG_HBI, + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) | RXCFG_RX_FD, + dev->base + RXCFG); + } else { + writel(readl(dev->base + TXCFG) + & ~(TXCFG_CSI | TXCFG_HBI), + dev->base + TXCFG); + writel(readl(dev->base + RXCFG) & ~(RXCFG_RX_FD), + dev->base + RXCFG); + } if ((cfg & CFG_LNKSTS) && - ((new_cfg ^ dev->CFG_cache) & CFG_MODE_1000)) { + ((new_cfg ^ dev->CFG_cache) != 0)) { writel(new_cfg, dev->base + CFG); dev->CFG_cache = new_cfg; } @@ -1189,7 +1185,6 @@ again: for (;;) { volatile u32 *desc = dev->tx_descs + (free_idx * DESC_SIZE); - u32 residue = 0; dprintk("frag[%3u]: %4u @ 0x%08Lx\n", free_idx, len, (unsigned long long)buf); @@ -1199,17 +1194,11 @@ again: desc_addr_set(desc + DESC_BUFPTR, buf); desc[DESC_EXTSTS] = cpu_to_le32(extsts); - cmdsts = ((nr_frags|residue) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); + cmdsts = ((nr_frags) ? CMDSTS_MORE : do_intr ? CMDSTS_INTR : 0); cmdsts |= (desc == first_desc) ? 0 : CMDSTS_OWN; cmdsts |= len; desc[DESC_CMDSTS] = cpu_to_le32(cmdsts); - if (residue) { - buf += len; - len = residue; - continue; - } - if (!nr_frags) break; @@ -1841,7 +1830,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ int using_dac = 0; /* See if we can set the dma mask early on; failure is fatal. */ - if (TRY_DAC && !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { + if (sizeof(dma_addr_t) == 8 && + !pci_set_dma_mask(pci_dev, 0xffffffffffffffffULL)) { using_dac = 1; } else if (!pci_set_dma_mask(pci_dev, 0xffffffff)) { using_dac = 0; @@ -1972,9 +1962,8 @@ static int __devinit ns83820_init_one(struct pci_dev *pci_dev, const struct pci_ /* When compiled with 64 bit addressing, we must always enable * the 64 bit descriptor format. */ -#ifdef USE_64BIT_ADDR - dev->CFG_cache |= CFG_M64ADDR; -#endif + if (sizeof(dma_addr_t) == 8) + dev->CFG_cache |= CFG_M64ADDR; if (using_dac) dev->CFG_cache |= CFG_T64ADDR; diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c index 41e51711480..c6e8b25f968 100644 --- a/drivers/net/pcmcia/3c574_cs.c +++ b/drivers/net/pcmcia/3c574_cs.c @@ -1274,6 +1274,9 @@ static int el3_close(struct net_device *dev) spin_lock_irqsave(&lp->window_lock, flags); update_stats(dev); spin_unlock_irqrestore(&lp->window_lock, flags); + + /* force interrupts off */ + outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD); } link->open--; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index b0126304ca0..181b6ed5500 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -1537,20 +1537,20 @@ static void shmem_get_8390_hdr(struct net_device *dev, static void shmem_block_input(struct net_device *dev, int count, struct sk_buff *skb, int ring_offset) { - void __iomem *xfer_start = ei_status.mem + (TX_PAGES<<8) - + ring_offset + void __iomem *base = ei_status.mem; + unsigned long offset = (TX_PAGES<<8) + ring_offset - (ei_status.rx_start_page << 8); char *buf = skb->data; - if (xfer_start + count > (void __iomem *)ei_status.rmem_end) { + if (offset + count > ei_status.priv) { /* We must wrap the input move. */ - int semi_count = (void __iomem *)ei_status.rmem_end - xfer_start; - copyin(buf, xfer_start, semi_count); + int semi_count = ei_status.priv - offset; + copyin(buf, base + offset, semi_count); buf += semi_count; - xfer_start = ei_status.mem + (TX_PAGES<<8); + offset = TX_PAGES<<8; count -= semi_count; } - copyin(buf, xfer_start, count); + copyin(buf, base + offset, count); } /*====================================================================*/ @@ -1611,8 +1611,9 @@ static int setup_shmem_window(dev_link_t *link, int start_pg, } ei_status.mem = info->base + offset; + ei_status.priv = req.Size; dev->mem_start = (u_long)ei_status.mem; - dev->mem_end = ei_status.rmem_end = (u_long)info->base + req.Size; + dev->mem_end = dev->mem_start + req.Size; ei_status.tx_start_page = start_pg; ei_status.rx_start_page = start_pg + TX_PAGES; diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index 17947e6c879..13f11487696 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -22,8 +22,8 @@ *************************************************************************/ #define DRV_NAME "pcnet32" -#define DRV_VERSION "1.30i" -#define DRV_RELDATE "06.28.2004" +#define DRV_VERSION "1.30j" +#define DRV_RELDATE "29.04.2005" #define PFX DRV_NAME ": " static const char *version = @@ -256,6 +256,7 @@ static int homepna[MAX_UNITS]; * homepna for selecting HomePNA mode for PCNet/Home 79C978. * v1.30h 24 Jun 2004 Don Fry correctly select auto, speed, duplex in bcr32. * v1.30i 28 Jun 2004 Don Fry change to use module_param. + * v1.30j 29 Apr 2005 Don Fry fix skb/map leak with loopback test. */ @@ -395,6 +396,7 @@ static void pcnet32_led_blink_callback(struct net_device *dev); static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); +static void pcnet32_purge_tx_ring(struct net_device *dev); enum pci_flags_bit { PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4, @@ -785,6 +787,7 @@ static int pcnet32_loopback_test(struct net_device *dev, uint64_t *data1) } clean_up: + pcnet32_purge_tx_ring(dev); x = a->read_csr(ioaddr, 15) & 0xFFFF; a->write_csr(ioaddr, 15, (x & ~0x0044)); /* reset bits 6 and 2 */ diff --git a/drivers/net/ppp_async.c b/drivers/net/ppp_async.c index 33b9d79b1aa..5e48b9ab304 100644 --- a/drivers/net/ppp_async.c +++ b/drivers/net/ppp_async.c @@ -1025,7 +1025,7 @@ static void async_lcp_peek(struct asyncppp *ap, unsigned char *data, static void __exit ppp_async_cleanup(void) { - if (tty_register_ldisc(N_PPP, NULL) != 0) + if (tty_unregister_ldisc(N_PPP) != 0) printk(KERN_ERR "failed to unregister PPP line discipline\n"); } diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 3b377f6cd4a..ab726ab4379 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -273,7 +273,7 @@ static int ppp_connect_channel(struct channel *pch, int unit); static int ppp_disconnect_channel(struct channel *pch); static void ppp_destroy_channel(struct channel *pch); -static struct class_simple *ppp_class; +static struct class *ppp_class; /* Translates a PPP protocol number to a NP index (NP == network protocol) */ static inline int proto_to_npindex(int proto) @@ -858,12 +858,12 @@ static int __init ppp_init(void) printk(KERN_INFO "PPP generic driver version " PPP_VERSION "\n"); err = register_chrdev(PPP_MAJOR, "ppp", &ppp_device_fops); if (!err) { - ppp_class = class_simple_create(THIS_MODULE, "ppp"); + ppp_class = class_create(THIS_MODULE, "ppp"); if (IS_ERR(ppp_class)) { err = PTR_ERR(ppp_class); goto out_chrdev; } - class_simple_device_add(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); + class_device_create(ppp_class, MKDEV(PPP_MAJOR, 0), NULL, "ppp"); err = devfs_mk_cdev(MKDEV(PPP_MAJOR, 0), S_IFCHR|S_IRUSR|S_IWUSR, "ppp"); if (err) @@ -876,8 +876,8 @@ out: return err; out_class: - class_simple_device_remove(MKDEV(PPP_MAJOR,0)); - class_simple_destroy(ppp_class); + class_device_destroy(ppp_class, MKDEV(PPP_MAJOR,0)); + class_destroy(ppp_class); out_chrdev: unregister_chrdev(PPP_MAJOR, "ppp"); goto out; @@ -1217,36 +1217,43 @@ ppp_push(struct ppp *ppp) */ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) { - int nch, len, fragsize; + int len, fragsize; int i, bits, hdrlen, mtu; - int flen, fnb; + int flen; + int navail, nfree; + int nbigger; unsigned char *p, *q; struct list_head *list; struct channel *pch; struct sk_buff *frag; struct ppp_channel *chan; - nch = 0; + nfree = 0; /* # channels which have no packet already queued */ + navail = 0; /* total # of usable channels (not deregistered) */ hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; + i = 0; list = &ppp->channels; while ((list = list->next) != &ppp->channels) { pch = list_entry(list, struct channel, clist); - nch += pch->avail = (skb_queue_len(&pch->file.xq) == 0); - /* - * If a channel hasn't had a fragment yet, it has to get - * one before we send any fragments on later channels. - * If it can't take a fragment now, don't give any - * to subsequent channels. - */ - if (!pch->had_frag && !pch->avail) { - while ((list = list->next) != &ppp->channels) { - pch = list_entry(list, struct channel, clist); - pch->avail = 0; + navail += pch->avail = (pch->chan != NULL); + if (pch->avail) { + if (skb_queue_len(&pch->file.xq) == 0 + || !pch->had_frag) { + pch->avail = 2; + ++nfree; } - break; + if (!pch->had_frag && i < ppp->nxchan) + ppp->nxchan = i; } + ++i; } - if (nch == 0) + + /* + * Don't start sending this packet unless at least half of + * the channels are free. This gives much better TCP + * performance if we have a lot of channels. + */ + if (nfree == 0 || nfree < navail / 2) return 0; /* can't take now, leave it in xmit_pending */ /* Do protocol field compression (XXX this should be optional) */ @@ -1257,14 +1264,19 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) --len; } - /* decide on fragment size */ + /* + * Decide on fragment size. + * We create a fragment for each free channel regardless of + * how small they are (i.e. even 0 length) in order to minimize + * the time that it will take to detect when a channel drops + * a fragment. + */ fragsize = len; - if (nch > 1) { - int maxch = ROUNDUP(len, MIN_FRAG_SIZE); - if (nch > maxch) - nch = maxch; - fragsize = ROUNDUP(fragsize, nch); - } + if (nfree > 1) + fragsize = ROUNDUP(fragsize, nfree); + /* nbigger channels get fragsize bytes, the rest get fragsize-1, + except if nbigger==0, then they all get fragsize. */ + nbigger = len % nfree; /* skip to the channel after the one we last used and start at that one */ @@ -1278,7 +1290,7 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) /* create a fragment for each channel */ bits = B; - do { + while (nfree > 0 || len > 0) { list = list->next; if (list == &ppp->channels) { i = 0; @@ -1289,61 +1301,92 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) if (!pch->avail) continue; + /* + * Skip this channel if it has a fragment pending already and + * we haven't given a fragment to all of the free channels. + */ + if (pch->avail == 1) { + if (nfree > 0) + continue; + } else { + --nfree; + pch->avail = 1; + } + /* check the channel's mtu and whether it is still attached. */ spin_lock_bh(&pch->downl); - if (pch->chan == 0 || (mtu = pch->chan->mtu) < hdrlen) { - /* can't use this channel */ + if (pch->chan == NULL) { + /* can't use this channel, it's being deregistered */ spin_unlock_bh(&pch->downl); pch->avail = 0; - if (--nch == 0) + if (--navail == 0) break; continue; } /* - * We have to create multiple fragments for this channel - * if fragsize is greater than the channel's mtu. + * Create a fragment for this channel of + * min(max(mtu+2-hdrlen, 4), fragsize, len) bytes. + * If mtu+2-hdrlen < 4, that is a ridiculously small + * MTU, so we use mtu = 2 + hdrlen. */ if (fragsize > len) fragsize = len; - for (flen = fragsize; flen > 0; flen -= fnb) { - fnb = flen; - if (fnb > mtu + 2 - hdrlen) - fnb = mtu + 2 - hdrlen; - if (fnb >= len) - bits |= E; - frag = alloc_skb(fnb + hdrlen, GFP_ATOMIC); - if (frag == 0) - goto noskb; - q = skb_put(frag, fnb + hdrlen); - /* make the MP header */ - q[0] = PPP_MP >> 8; - q[1] = PPP_MP; - if (ppp->flags & SC_MP_XSHORTSEQ) { - q[2] = bits + ((ppp->nxseq >> 8) & 0xf); - q[3] = ppp->nxseq; - } else { - q[2] = bits; - q[3] = ppp->nxseq >> 16; - q[4] = ppp->nxseq >> 8; - q[5] = ppp->nxseq; - } - - /* copy the data in */ - memcpy(q + hdrlen, p, fnb); - - /* try to send it down the channel */ - chan = pch->chan; - if (!chan->ops->start_xmit(chan, frag)) - skb_queue_tail(&pch->file.xq, frag); - pch->had_frag = 1; - p += fnb; - len -= fnb; - ++ppp->nxseq; - bits = 0; + flen = fragsize; + mtu = pch->chan->mtu + 2 - hdrlen; + if (mtu < 4) + mtu = 4; + if (flen > mtu) + flen = mtu; + if (flen == len && nfree == 0) + bits |= E; + frag = alloc_skb(flen + hdrlen + (flen == 0), GFP_ATOMIC); + if (frag == 0) + goto noskb; + q = skb_put(frag, flen + hdrlen); + + /* make the MP header */ + q[0] = PPP_MP >> 8; + q[1] = PPP_MP; + if (ppp->flags & SC_MP_XSHORTSEQ) { + q[2] = bits + ((ppp->nxseq >> 8) & 0xf); + q[3] = ppp->nxseq; + } else { + q[2] = bits; + q[3] = ppp->nxseq >> 16; + q[4] = ppp->nxseq >> 8; + q[5] = ppp->nxseq; } + + /* + * Copy the data in. + * Unfortunately there is a bug in older versions of + * the Linux PPP multilink reconstruction code where it + * drops 0-length fragments. Therefore we make sure the + * fragment has at least one byte of data. Any bytes + * we add in this situation will end up as padding on the + * end of the reconstructed packet. + */ + if (flen == 0) + *skb_put(frag, 1) = 0; + else + memcpy(q + hdrlen, p, flen); + + /* try to send it down the channel */ + chan = pch->chan; + if (skb_queue_len(&pch->file.xq) + || !chan->ops->start_xmit(chan, frag)) + skb_queue_tail(&pch->file.xq, frag); + pch->had_frag = 1; + p += flen; + len -= flen; + ++ppp->nxseq; + bits = 0; spin_unlock_bh(&pch->downl); - } while (len > 0); + + if (--nbigger == 0 && fragsize > 0) + --fragsize; + } ppp->nxchan = i; return 1; @@ -1422,7 +1465,7 @@ ppp_input(struct ppp_channel *chan, struct sk_buff *skb) kfree_skb(skb); return; } - + proto = PPP_PROTO(skb); read_lock_bh(&pch->upl); if (pch->ppp == 0 || proto >= 0xc000 || proto == PPP_CCPFRAG) { @@ -1691,7 +1734,7 @@ ppp_receive_mp_frame(struct ppp *ppp, struct sk_buff *skb, struct channel *pch) struct list_head *l; int mphdrlen = (ppp->flags & SC_MP_SHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; - if (!pskb_may_pull(skb, mphdrlen + 1) || ppp->mrru == 0) + if (!pskb_may_pull(skb, mphdrlen) || ppp->mrru == 0) goto err; /* no good, throw it away */ /* Decode sequence number and begin/end bits */ @@ -2611,8 +2654,8 @@ static void __exit ppp_cleanup(void) if (unregister_chrdev(PPP_MAJOR, "ppp") != 0) printk(KERN_ERR "PPP: failed to unregister PPP device\n"); devfs_remove("ppp"); - class_simple_device_remove(MKDEV(PPP_MAJOR, 0)); - class_simple_destroy(ppp_class); + class_device_destroy(ppp_class, MKDEV(PPP_MAJOR, 0)); + class_destroy(ppp_class); } /* diff --git a/drivers/net/ppp_synctty.c b/drivers/net/ppp_synctty.c index 7d0150b4c62..fd9f5018035 100644 --- a/drivers/net/ppp_synctty.c +++ b/drivers/net/ppp_synctty.c @@ -793,7 +793,7 @@ err: static void __exit ppp_sync_cleanup(void) { - if (tty_register_ldisc(N_SYNC_PPP, NULL) != 0) + if (tty_unregister_ldisc(N_SYNC_PPP) != 0) printk(KERN_ERR "failed to unregister Sync PPP line discipline\n"); } diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index c59507f8a76..ce449fe90e6 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -69,7 +69,13 @@ VERSION 2.2LK <2005/01/25> #include <asm/io.h> #include <asm/irq.h> -#define RTL8169_VERSION "2.2LK" +#ifdef CONFIG_R8169_NAPI +#define NAPI_SUFFIX "-NAPI" +#else +#define NAPI_SUFFIX "" +#endif + +#define RTL8169_VERSION "2.2LK" NAPI_SUFFIX #define MODULENAME "r8169" #define PFX MODULENAME ": " @@ -85,6 +91,10 @@ VERSION 2.2LK <2005/01/25> #define dprintk(fmt, args...) do {} while (0) #endif /* RTL8169_DEBUG */ +#define R8169_MSG_DEFAULT \ + (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | NETIF_MSG_IFUP | \ + NETIF_MSG_IFDOWN) + #define TX_BUFFS_AVAIL(tp) \ (tp->dirty_tx + NUM_TX_DESC - tp->cur_tx - 1) @@ -174,8 +184,9 @@ const static struct { #undef _R static struct pci_device_id rtl8169_pci_tbl[] = { - {0x10ec, 0x8169, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, - {0x1186, 0x4300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, + { PCI_DEVICE(PCI_VENDOR_ID_REALTEK, 0x8169), }, + { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4300), }, + { PCI_DEVICE(0x16ec, 0x0116), }, {0,}, }; @@ -183,10 +194,15 @@ MODULE_DEVICE_TABLE(pci, rtl8169_pci_tbl); static int rx_copybreak = 200; static int use_dac; +static struct { + u32 msg_enable; +} debug = { -1 }; enum RTL8169_registers { MAC0 = 0, /* Ethernet hardware address. */ MAR0 = 8, /* Multicast filter. */ + CounterAddrLow = 0x10, + CounterAddrHigh = 0x14, TxDescStartAddrLow = 0x20, TxDescStartAddrHigh = 0x24, TxHDescStartAddrLow = 0x28, @@ -328,6 +344,9 @@ enum RTL8169_register_content { /* _TBICSRBit */ TBILinkOK = 0x02000000, + + /* DumpCounterCommand */ + CounterDump = 0x8, }; enum _DescStatusBit { @@ -385,6 +404,7 @@ struct rtl8169_private { struct pci_dev *pci_dev; /* Index of PCI device */ struct net_device_stats stats; /* statistics of net device */ spinlock_t lock; /* spin lock flag */ + u32 msg_enable; int chipset; int mac_version; int phy_version; @@ -415,12 +435,16 @@ struct rtl8169_private { struct work_struct task; }; -MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@oss.sgi.com>"); +MODULE_AUTHOR("Realtek and the Linux r8169 crew <netdev@vger.kernel.org>"); MODULE_DESCRIPTION("RealTek RTL-8169 Gigabit Ethernet driver"); module_param_array(media, int, &num_media, 0); +MODULE_PARM_DESC(media, "force phy operation. Deprecated by ethtool (8)."); module_param(rx_copybreak, int, 0); +MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames"); module_param(use_dac, int, 0); MODULE_PARM_DESC(use_dac, "Enable PCI DAC. Unsafe on 32 bit PCI slot."); +module_param_named(debug, debug.msg_enable, int, 0); +MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)"); MODULE_LICENSE("GPL"); MODULE_VERSION(RTL8169_VERSION); @@ -433,10 +457,10 @@ static void rtl8169_hw_start(struct net_device *dev); static int rtl8169_close(struct net_device *dev); static void rtl8169_set_rx_mode(struct net_device *dev); static void rtl8169_tx_timeout(struct net_device *dev); -static struct net_device_stats *rtl8169_get_stats(struct net_device *netdev); +static struct net_device_stats *rtl8169_get_stats(struct net_device *dev); static int rtl8169_rx_interrupt(struct net_device *, struct rtl8169_private *, void __iomem *); -static int rtl8169_change_mtu(struct net_device *netdev, int new_mtu); +static int rtl8169_change_mtu(struct net_device *dev, int new_mtu); static void rtl8169_down(struct net_device *dev); #ifdef CONFIG_R8169_NAPI @@ -543,9 +567,13 @@ static void rtl8169_check_link_status(struct net_device *dev, spin_lock_irqsave(&tp->lock, flags); if (tp->link_ok(ioaddr)) { netif_carrier_on(dev); - printk(KERN_INFO PFX "%s: link up\n", dev->name); - } else + if (netif_msg_ifup(tp)) + printk(KERN_INFO PFX "%s: link up\n", dev->name); + } else { + if (netif_msg_ifdown(tp)) + printk(KERN_INFO PFX "%s: link down\n", dev->name); netif_carrier_off(dev); + } spin_unlock_irqrestore(&tp->lock, flags); } @@ -569,7 +597,7 @@ static void rtl8169_link_option(int idx, u8 *autoneg, u16 *speed, u8 *duplex) option = ((idx < MAX_UNITS) && (idx >= 0)) ? media[idx] : 0xff; - if ((option != 0xff) && !idx) + if ((option != 0xff) && !idx && netif_msg_drv(&debug)) printk(KERN_WARNING PFX "media option is deprecated.\n"); for (p = link_settings; p->media != 0xff; p++) { @@ -611,9 +639,11 @@ static int rtl8169_set_speed_tbi(struct net_device *dev, } else if (autoneg == AUTONEG_ENABLE) RTL_W32(TBICSR, reg | TBINwEnable | TBINwRestart); else { - printk(KERN_WARNING PFX - "%s: incorrect speed setting refused in TBI mode\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_WARNING "%s: " + "incorrect speed setting refused in TBI mode\n", + dev->name); + } ret = -EOPNOTSUPP; } @@ -871,12 +901,120 @@ static void rtl8169_get_regs(struct net_device *dev, struct ethtool_regs *regs, spin_unlock_irqrestore(&tp->lock, flags); } +static u32 rtl8169_get_msglevel(struct net_device *dev) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + return tp->msg_enable; +} + +static void rtl8169_set_msglevel(struct net_device *dev, u32 value) +{ + struct rtl8169_private *tp = netdev_priv(dev); + + tp->msg_enable = value; +} + +static const char rtl8169_gstrings[][ETH_GSTRING_LEN] = { + "tx_packets", + "rx_packets", + "tx_errors", + "rx_errors", + "rx_missed", + "align_errors", + "tx_single_collisions", + "tx_multi_collisions", + "unicast", + "broadcast", + "multicast", + "tx_aborted", + "tx_underrun", +}; + +struct rtl8169_counters { + u64 tx_packets; + u64 rx_packets; + u64 tx_errors; + u32 rx_errors; + u16 rx_missed; + u16 align_errors; + u32 tx_one_collision; + u32 tx_multi_collision; + u64 rx_unicast; + u64 rx_broadcast; + u32 rx_multicast; + u16 tx_aborted; + u16 tx_underun; +}; + +static int rtl8169_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(rtl8169_gstrings); +} + +static void rtl8169_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct rtl8169_private *tp = netdev_priv(dev); + void __iomem *ioaddr = tp->mmio_addr; + struct rtl8169_counters *counters; + dma_addr_t paddr; + u32 cmd; + + ASSERT_RTNL(); + + counters = pci_alloc_consistent(tp->pci_dev, sizeof(*counters), &paddr); + if (!counters) + return; + + RTL_W32(CounterAddrHigh, (u64)paddr >> 32); + cmd = (u64)paddr & DMA_32BIT_MASK; + RTL_W32(CounterAddrLow, cmd); + RTL_W32(CounterAddrLow, cmd | CounterDump); + + while (RTL_R32(CounterAddrLow) & CounterDump) { + if (msleep_interruptible(1)) + break; + } + + RTL_W32(CounterAddrLow, 0); + RTL_W32(CounterAddrHigh, 0); + + data[0] = le64_to_cpu(counters->tx_packets); + data[1] = le64_to_cpu(counters->rx_packets); + data[2] = le64_to_cpu(counters->tx_errors); + data[3] = le32_to_cpu(counters->rx_errors); + data[4] = le16_to_cpu(counters->rx_missed); + data[5] = le16_to_cpu(counters->align_errors); + data[6] = le32_to_cpu(counters->tx_one_collision); + data[7] = le32_to_cpu(counters->tx_multi_collision); + data[8] = le64_to_cpu(counters->rx_unicast); + data[9] = le64_to_cpu(counters->rx_broadcast); + data[10] = le32_to_cpu(counters->rx_multicast); + data[11] = le16_to_cpu(counters->tx_aborted); + data[12] = le16_to_cpu(counters->tx_underun); + + pci_free_consistent(tp->pci_dev, sizeof(*counters), counters, paddr); +} + +static void rtl8169_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + switch(stringset) { + case ETH_SS_STATS: + memcpy(data, *rtl8169_gstrings, sizeof(rtl8169_gstrings)); + break; + } +} + + static struct ethtool_ops rtl8169_ethtool_ops = { .get_drvinfo = rtl8169_get_drvinfo, .get_regs_len = rtl8169_get_regs_len, .get_link = ethtool_op_get_link, .get_settings = rtl8169_get_settings, .set_settings = rtl8169_set_settings, + .get_msglevel = rtl8169_get_msglevel, + .set_msglevel = rtl8169_set_msglevel, .get_rx_csum = rtl8169_get_rx_csum, .set_rx_csum = rtl8169_set_rx_csum, .get_tx_csum = ethtool_op_get_tx_csum, @@ -886,6 +1024,9 @@ static struct ethtool_ops rtl8169_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = ethtool_op_set_tso, .get_regs = rtl8169_get_regs, + .get_strings = rtl8169_get_strings, + .get_stats_count = rtl8169_get_stats_count, + .get_ethtool_stats = rtl8169_get_ethtool_stats, }; static void rtl8169_write_gmii_reg_bit(void __iomem *ioaddr, int reg, int bitnum, @@ -1091,7 +1232,8 @@ static void rtl8169_phy_timer(unsigned long __opaque) if (tp->link_ok(ioaddr)) goto out_unlock; - printk(KERN_WARNING PFX "%s: PHY reset until link up\n", dev->name); + if (netif_msg_link(tp)) + printk(KERN_WARNING "%s: PHY reset until link up\n", dev->name); tp->phy_reset_enable(ioaddr); @@ -1169,18 +1311,23 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* dev zeroed in alloc_etherdev */ dev = alloc_etherdev(sizeof (*tp)); if (dev == NULL) { - printk(KERN_ERR PFX "unable to alloc new ethernet\n"); + if (netif_msg_drv(&debug)) + printk(KERN_ERR PFX "unable to alloc new ethernet\n"); goto err_out; } SET_MODULE_OWNER(dev); SET_NETDEV_DEV(dev, &pdev->dev); tp = netdev_priv(dev); + tp->msg_enable = netif_msg_init(debug.msg_enable, R8169_MSG_DEFAULT); /* enable device (incl. PCI PM wakeup and hotplug setup) */ rc = pci_enable_device(pdev); - if (rc) { - printk(KERN_ERR PFX "%s: enable failure\n", pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: enable failure\n", + pci_name(pdev)); + } goto err_out_free_dev; } @@ -1196,29 +1343,39 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, pci_read_config_word(pdev, pm_cap + PCI_PM_CTRL, &pwr_command); acpi_idle_state = pwr_command & PCI_PM_CTRL_STATE_MASK; } else { - printk(KERN_ERR PFX - "Cannot find PowerManagement capability, aborting.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Cannot find PowerManagement capability. " + "Aborting.\n"); + } goto err_out_mwi; } /* make sure PCI base addr 1 is MMIO */ if (!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) { - printk(KERN_ERR PFX - "region #1 not an MMIO resource, aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "region #1 not an MMIO resource, aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } /* check for weird/broken PCI region reporting */ if (pci_resource_len(pdev, 1) < R8169_REGS_SIZE) { - printk(KERN_ERR PFX "Invalid PCI region size(s), aborting\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "Invalid PCI region size(s), aborting\n"); + } rc = -ENODEV; goto err_out_mwi; } rc = pci_request_regions(pdev, MODULENAME); - if (rc) { - printk(KERN_ERR PFX "%s: could not request regions.\n", - pci_name(pdev)); + if (rc < 0) { + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX "%s: could not request regions.\n", + pci_name(pdev)); + } goto err_out_mwi; } @@ -1231,7 +1388,10 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } else { rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); if (rc < 0) { - printk(KERN_ERR PFX "DMA configuration failed.\n"); + if (netif_msg_probe(tp)) { + printk(KERN_ERR PFX + "DMA configuration failed.\n"); + } goto err_out_free_res; } } @@ -1241,7 +1401,8 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, /* ioremap MMIO region */ ioaddr = ioremap(pci_resource_start(pdev, 1), R8169_REGS_SIZE); if (ioaddr == NULL) { - printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); + if (netif_msg_probe(tp)) + printk(KERN_ERR PFX "cannot remap MMIO, aborting\n"); rc = -EIO; goto err_out_free_res; } @@ -1272,9 +1433,11 @@ rtl8169_init_board(struct pci_dev *pdev, struct net_device **dev_out, } if (i < 0) { /* Unknown chip: assume array element #0, original RTL-8169 */ - printk(KERN_DEBUG PFX - "PCI device %s: unknown chip version, assuming %s\n", - pci_name(pdev), rtl_chip_info[0].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG PFX "PCI device %s: " + "unknown chip version, assuming %s\n", + pci_name(pdev), rtl_chip_info[0].name); + } i++; } tp->chipset = i; @@ -1308,7 +1471,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct rtl8169_private *tp; void __iomem *ioaddr = NULL; static int board_idx = -1; - static int printed_version = 0; u8 autoneg, duplex; u16 speed; int i, rc; @@ -1318,10 +1480,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) board_idx++; - if (!printed_version) { + if (netif_msg_drv(&debug)) { printk(KERN_INFO "%s Gigabit Ethernet driver %s loaded\n", MODULENAME, RTL8169_VERSION); - printed_version = 1; } rc = rtl8169_init_board(pdev, &dev, &ioaddr); @@ -1366,7 +1527,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) #ifdef CONFIG_R8169_NAPI dev->poll = rtl8169_poll; dev->weight = R8169_NAPI_WEIGHT; - printk(KERN_INFO PFX "NAPI enabled\n"); #endif #ifdef CONFIG_R8169_VLAN @@ -1391,20 +1551,24 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } - printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", dev->name, - rtl_chip_info[tp->chipset].name); + if (netif_msg_probe(tp)) { + printk(KERN_DEBUG "%s: Identified chip type is '%s'.\n", + dev->name, rtl_chip_info[tp->chipset].name); + } pci_set_drvdata(pdev, dev); - printk(KERN_INFO "%s: %s at 0x%lx, " - "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " - "IRQ %d\n", - dev->name, - rtl_chip_info[ent->driver_data].name, - dev->base_addr, - dev->dev_addr[0], dev->dev_addr[1], - dev->dev_addr[2], dev->dev_addr[3], - dev->dev_addr[4], dev->dev_addr[5], dev->irq); + if (netif_msg_probe(tp)) { + printk(KERN_INFO "%s: %s at 0x%lx, " + "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, " + "IRQ %d\n", + dev->name, + rtl_chip_info[ent->driver_data].name, + dev->base_addr, + dev->dev_addr[0], dev->dev_addr[1], + dev->dev_addr[2], dev->dev_addr[3], + dev->dev_addr[4], dev->dev_addr[5], dev->irq); + } rtl8169_hw_phy_config(dev); @@ -1427,7 +1591,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) rtl8169_set_speed(dev, autoneg, speed, duplex); - if (RTL_R8(PHYstatus) & TBI_Enable) + if ((RTL_R8(PHYstatus) & TBI_Enable) && netif_msg_link(tp)) printk(KERN_INFO PFX "%s: TBI auto-negotiating\n", dev->name); return 0; @@ -1585,8 +1749,8 @@ rtl8169_hw_start(struct net_device *dev) RTL_W8(ChipCmd, CmdTxEnb | CmdRxEnb); RTL_W8(EarlyTxThres, EarlyTxThld); - /* For gigabit rtl8169, MTU + header + CRC + VLAN */ - RTL_W16(RxMaxSize, tp->rx_buf_sz); + /* Low hurts. Let's disable the filtering. */ + RTL_W16(RxMaxSize, 16383); /* Set Rx Config register */ i = rtl8169_rx_config | @@ -1860,8 +2024,13 @@ static void rtl8169_reinit_task(void *_data) ret = rtl8169_open(dev); if (unlikely(ret < 0)) { if (net_ratelimit()) { - printk(PFX KERN_ERR "%s: reinit failure (status = %d)." - " Rescheduling.\n", dev->name, ret); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_drv(tp)) { + printk(PFX KERN_ERR + "%s: reinit failure (status = %d)." + " Rescheduling.\n", dev->name, ret); + } } rtl8169_schedule_work(dev, rtl8169_reinit_task); } @@ -1886,8 +2055,12 @@ static void rtl8169_reset_task(void *_data) netif_wake_queue(dev); } else { if (net_ratelimit()) { - printk(PFX KERN_EMERG "%s: Rx buffers shortage\n", - dev->name); + struct rtl8169_private *tp = netdev_priv(dev); + + if (netif_msg_intr(tp)) { + printk(PFX KERN_EMERG + "%s: Rx buffers shortage\n", dev->name); + } } rtl8169_schedule_work(dev, rtl8169_reset_task); } @@ -1973,8 +2146,11 @@ static int rtl8169_start_xmit(struct sk_buff *skb, struct net_device *dev) int ret = 0; if (unlikely(TX_BUFFS_AVAIL(tp) < skb_shinfo(skb)->nr_frags)) { - printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", - dev->name); + if (netif_msg_drv(tp)) { + printk(KERN_ERR + "%s: BUG! Tx Ring full when queue awake!\n", + dev->name); + } goto err_stop; } @@ -2049,8 +2225,11 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd); pci_read_config_word(pdev, PCI_STATUS, &pci_status); - printk(KERN_ERR PFX "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", - dev->name, pci_cmd, pci_status); + if (netif_msg_intr(tp)) { + printk(KERN_ERR + "%s: PCI error (cmd = 0x%04x, status = 0x%04x).\n", + dev->name, pci_cmd, pci_status); + } /* * The recovery sequence below admits a very elaborated explanation: @@ -2069,7 +2248,8 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) /* The infamous DAC f*ckup only happens at boot time */ if ((tp->cp_cmd & PCIDAC) && !tp->dirty_rx && !tp->cur_rx) { - printk(KERN_INFO PFX "%s: disabling PCI DAC.\n", dev->name); + if (netif_msg_intr(tp)) + printk(KERN_INFO "%s: disabling PCI DAC.\n", dev->name); tp->cp_cmd &= ~PCIDAC; RTL_W16(CPlusCmd, tp->cp_cmd); dev->features &= ~NETIF_F_HIGHDMA; @@ -2127,6 +2307,11 @@ rtl8169_tx_interrupt(struct net_device *dev, struct rtl8169_private *tp, } } +static inline int rtl8169_fragmented_frame(u32 status) +{ + return (status & (FirstFrag | LastFrag)) != (FirstFrag | LastFrag); +} + static inline void rtl8169_rx_csum(struct sk_buff *skb, struct RxDesc *desc) { u32 opts1 = le32_to_cpu(desc->opts1); @@ -2175,29 +2360,46 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx; rx_left = rtl8169_rx_quota(rx_left, (u32) dev->quota); - while (rx_left > 0) { + for (; rx_left > 0; rx_left--, cur_rx++) { unsigned int entry = cur_rx % NUM_RX_DESC; + struct RxDesc *desc = tp->RxDescArray + entry; u32 status; rmb(); - status = le32_to_cpu(tp->RxDescArray[entry].opts1); + status = le32_to_cpu(desc->opts1); if (status & DescOwn) break; - if (status & RxRES) { - printk(KERN_INFO "%s: Rx ERROR!!!\n", dev->name); + if (unlikely(status & RxRES)) { + if (netif_msg_rx_err(tp)) { + printk(KERN_INFO + "%s: Rx ERROR. status = %08x\n", + dev->name, status); + } tp->stats.rx_errors++; if (status & (RxRWT | RxRUNT)) tp->stats.rx_length_errors++; if (status & RxCRC) tp->stats.rx_crc_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); } else { - struct RxDesc *desc = tp->RxDescArray + entry; struct sk_buff *skb = tp->Rx_skbuff[entry]; int pkt_size = (status & 0x00001FFF) - 4; void (*pci_action)(struct pci_dev *, dma_addr_t, size_t, int) = pci_dma_sync_single_for_device; + /* + * The driver does not support incoming fragmented + * frames. They are seen as a symptom of over-mtu + * sized frames. + */ + if (unlikely(rtl8169_fragmented_frame(status))) { + tp->stats.rx_dropped++; + tp->stats.rx_length_errors++; + rtl8169_mark_to_asic(desc, tp->rx_buf_sz); + continue; + } + rtl8169_rx_csum(skb, desc); pci_dma_sync_single_for_cpu(tp->pci_dev, @@ -2224,16 +2426,13 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, tp->stats.rx_bytes += pkt_size; tp->stats.rx_packets++; } - - cur_rx++; - rx_left--; } count = cur_rx - tp->cur_rx; tp->cur_rx = cur_rx; delta = rtl8169_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx); - if (!delta && count) + if (!delta && count && netif_msg_intr(tp)) printk(KERN_INFO "%s: no Rx buffer allocated\n", dev->name); tp->dirty_rx += delta; @@ -2244,7 +2443,7 @@ rtl8169_rx_interrupt(struct net_device *dev, struct rtl8169_private *tp, * after refill ? * - how do others driver handle this condition (Uh oh...). */ - if (tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) + if ((tp->dirty_rx + NUM_RX_DESC == tp->cur_rx) && netif_msg_intr(tp)) printk(KERN_EMERG "%s: Rx buffers exhausted\n", dev->name); return count; @@ -2296,7 +2495,7 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) if (likely(netif_rx_schedule_prep(dev))) __netif_rx_schedule(dev); - else { + else if (netif_msg_intr(tp)) { printk(KERN_INFO "%s: interrupt %04x taken in poll\n", dev->name, status); } @@ -2315,8 +2514,10 @@ rtl8169_interrupt(int irq, void *dev_instance, struct pt_regs *regs) } while (boguscnt > 0); if (boguscnt <= 0) { - printk(KERN_WARNING "%s: Too much work at interrupt!\n", - dev->name); + if (net_ratelimit() && netif_msg_intr(tp)) { + printk(KERN_WARNING + "%s: Too much work at interrupt!\n", dev->name); + } /* Clear all interrupt sources. */ RTL_W16(IntrStatus, 0xffff); } @@ -2439,8 +2640,10 @@ rtl8169_set_rx_mode(struct net_device *dev) if (dev->flags & IFF_PROMISC) { /* Unconditionally log net taps. */ - printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", - dev->name); + if (netif_msg_link(tp)) { + printk(KERN_NOTICE "%s: Promiscuous mode enabled.\n", + dev->name); + } rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys | AcceptAllPhys; diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c index e68cf5fb492..20edeb34579 100644 --- a/drivers/net/shaper.c +++ b/drivers/net/shaper.c @@ -100,35 +100,8 @@ static int sh_debug; /* Debug flag */ #define SHAPER_BANNER "CymruNet Traffic Shaper BETA 0.04 for Linux 2.1\n" -/* - * Locking - */ - -static int shaper_lock(struct shaper *sh) -{ - /* - * Lock in an interrupt must fail - */ - while (test_and_set_bit(0, &sh->locked)) - { - if (!in_interrupt()) - sleep_on(&sh->wait_queue); - else - return 0; - - } - return 1; -} - static void shaper_kick(struct shaper *sh); -static void shaper_unlock(struct shaper *sh) -{ - clear_bit(0, &sh->locked); - wake_up(&sh->wait_queue); - shaper_kick(sh); -} - /* * Compute clocks on a buffer */ @@ -157,17 +130,15 @@ static void shaper_setspeed(struct shaper *shaper, int bitspersec) * Throw a frame at a shaper. */ -static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) + +static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) { + struct shaper *shaper = dev->priv; struct sk_buff *ptr; - /* - * Get ready to work on this shaper. Lock may fail if its - * an interrupt and locked. - */ - - if(!shaper_lock(shaper)) - return -1; + if (down_trylock(&shaper->sem)) + return -1; + ptr=shaper->sendq.prev; /* @@ -260,7 +231,8 @@ static int shaper_qframe(struct shaper *shaper, struct sk_buff *skb) dev_kfree_skb(ptr); shaper->stats.collisions++; } - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); return 0; } @@ -297,8 +269,13 @@ static void shaper_queue_xmit(struct shaper *shaper, struct sk_buff *skb) static void shaper_timer(unsigned long data) { - struct shaper *sh=(struct shaper *)data; - shaper_kick(sh); + struct shaper *shaper = (struct shaper *)data; + + if (!down_trylock(&shaper->sem)) { + shaper_kick(shaper); + up(&shaper->sem); + } else + mod_timer(&shaper->timer, jiffies); } /* @@ -311,19 +288,6 @@ static void shaper_kick(struct shaper *shaper) struct sk_buff *skb; /* - * Shaper unlock will kick - */ - - if (test_and_set_bit(0, &shaper->locked)) - { - if(sh_debug) - printk("Shaper locked.\n"); - mod_timer(&shaper->timer, jiffies); - return; - } - - - /* * Walk the list (may be empty) */ @@ -364,8 +328,6 @@ static void shaper_kick(struct shaper *shaper) if(skb!=NULL) mod_timer(&shaper->timer, SHAPERCB(skb)->shapeclock); - - clear_bit(0, &shaper->locked); } @@ -376,14 +338,12 @@ static void shaper_kick(struct shaper *shaper) static void shaper_flush(struct shaper *shaper) { struct sk_buff *skb; - if(!shaper_lock(shaper)) - { - printk(KERN_ERR "shaper: shaper_flush() called by an irq!\n"); - return; - } + + down(&shaper->sem); while((skb=skb_dequeue(&shaper->sendq))!=NULL) dev_kfree_skb(skb); - shaper_unlock(shaper); + shaper_kick(shaper); + up(&shaper->sem); } /* @@ -426,13 +386,6 @@ static int shaper_close(struct net_device *dev) * ARP and other resolutions and not before. */ - -static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct shaper *sh=dev->priv; - return shaper_qframe(sh, skb); -} - static struct net_device_stats *shaper_get_stats(struct net_device *dev) { struct shaper *sh=dev->priv; @@ -623,7 +576,6 @@ static void shaper_init_priv(struct net_device *dev) init_timer(&sh->timer); sh->timer.function=shaper_timer; sh->timer.data=(unsigned long)sh; - init_waitqueue_head(&sh->wait_queue); } /* diff --git a/drivers/net/sis900.c b/drivers/net/sis900.c index 3e9d9aab058..3107aed0fb5 100644 --- a/drivers/net/sis900.c +++ b/drivers/net/sis900.c @@ -162,6 +162,7 @@ struct sis900_private { struct mii_phy * mii; struct mii_phy * first_mii; /* record the first mii structure */ unsigned int cur_phy; + struct mii_if_info mii_info; struct timer_list timer; /* Link status detection timer. */ u8 autong_complete; /* 1: auto-negotiate complete */ @@ -203,7 +204,7 @@ static int sis900_open(struct net_device *net_dev); static int sis900_mii_probe (struct net_device * net_dev); static void sis900_init_rxfilter (struct net_device * net_dev); static u16 read_eeprom(long ioaddr, int location); -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location); +static int mdio_read(struct net_device *net_dev, int phy_id, int location); static void mdio_write(struct net_device *net_dev, int phy_id, int location, int val); static void sis900_timer(unsigned long data); static void sis900_check_mode (struct net_device *net_dev, struct mii_phy *mii_phy); @@ -478,7 +479,13 @@ static int __devinit sis900_probe(struct pci_dev *pci_dev, sis_priv->msg_enable = sis900_debug; else sis_priv->msg_enable = SIS900_DEF_MSG; - + + sis_priv->mii_info.dev = net_dev; + sis_priv->mii_info.mdio_read = mdio_read; + sis_priv->mii_info.mdio_write = mdio_write; + sis_priv->mii_info.phy_id_mask = 0x1f; + sis_priv->mii_info.reg_num_mask = 0x1f; + /* Get Mac address according to the chip revision */ pci_read_config_byte(pci_dev, PCI_CLASS_REVISION, &(sis_priv->chipset_rev)); if(netif_msg_probe(sis_priv)) @@ -725,6 +732,8 @@ static u16 sis900_default_phy(struct net_device * net_dev) pci_name(sis_priv->pci_dev), sis_priv->cur_phy); } + sis_priv->mii_info.phy_id = sis_priv->cur_phy; + status = mdio_read(net_dev, sis_priv->cur_phy, MII_CONTROL); status &= (~MII_CNTL_ISOLATE); @@ -852,7 +861,7 @@ static void mdio_reset(long mdio_addr) * Please see SiS7014 or ICS spec */ -static u16 mdio_read(struct net_device *net_dev, int phy_id, int location) +static int mdio_read(struct net_device *net_dev, int phy_id, int location) { long mdio_addr = net_dev->base_addr + mear; int mii_cmd = MIIread|(phy_id<<MIIpmdShift)|(location<<MIIregShift); @@ -1966,10 +1975,47 @@ static void sis900_set_msglevel(struct net_device *net_dev, u32 value) sis_priv->msg_enable = value; } +static u32 sis900_get_link(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_link_ok(&sis_priv->mii_info); +} + +static int sis900_get_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + spin_lock_irq(&sis_priv->lock); + mii_ethtool_gset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return 0; +} + +static int sis900_set_settings(struct net_device *net_dev, + struct ethtool_cmd *cmd) +{ + struct sis900_private *sis_priv = net_dev->priv; + int rt; + spin_lock_irq(&sis_priv->lock); + rt = mii_ethtool_sset(&sis_priv->mii_info, cmd); + spin_unlock_irq(&sis_priv->lock); + return rt; +} + +static int sis900_nway_reset(struct net_device *net_dev) +{ + struct sis900_private *sis_priv = net_dev->priv; + return mii_nway_restart(&sis_priv->mii_info); +} + static struct ethtool_ops sis900_ethtool_ops = { .get_drvinfo = sis900_get_drvinfo, .get_msglevel = sis900_get_msglevel, .set_msglevel = sis900_set_msglevel, + .get_link = sis900_get_link, + .get_settings = sis900_get_settings, + .set_settings = sis900_set_settings, + .nway_reset = sis900_nway_reset, }; /** diff --git a/drivers/net/sk98lin/skge.c b/drivers/net/sk98lin/skge.c index 05b827f79f5..1ccb2989001 100644 --- a/drivers/net/sk98lin/skge.c +++ b/drivers/net/sk98lin/skge.c @@ -4212,7 +4212,7 @@ SK_BOOL DualNet; Flags); SkGeStopPort(pAC, IoC, FromPort, SK_STOP_ALL, SK_HARD_RST); - pAC->dev[Param.Para32[0]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[0]]); spin_unlock_irqrestore( &pAC->TxPort[FromPort][TX_PRIO_LOW].TxDesRingLock, Flags); @@ -4355,7 +4355,7 @@ SK_BOOL DualNet; } /* Inform the world that link protocol is up. */ - pAC->dev[Param.Para32[0]]->flags |= IFF_RUNNING; + netif_carrier_on(pAC->dev[Param.Para32[0]]); break; case SK_DRV_NET_DOWN: /* SK_U32 Reason */ @@ -4368,7 +4368,7 @@ SK_BOOL DualNet; } else { DoPrintInterfaceChange = SK_TRUE; } - pAC->dev[Param.Para32[1]]->flags &= ~IFF_RUNNING; + netif_carrier_off(pAC->dev[Param.Para32[1]]); break; case SK_DRV_SWITCH_HARD: /* SK_U32 FromPortIdx SK_U32 ToPortIdx */ SK_DBG_MSG(NULL, SK_DBGMOD_DRV, SK_DBGCAT_DRV_EVENT, @@ -4961,7 +4961,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = &SkGePollController; #endif - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); @@ -5035,7 +5034,6 @@ static int __devinit skge_probe_one(struct pci_dev *pdev, dev->set_mac_address = &SkGeSetMacAddr; dev->do_ioctl = &SkGeIoctl; dev->change_mtu = &SkGeChangeMtu; - dev->flags &= ~IFF_RUNNING; SET_NETDEV_DEV(dev, &pdev->dev); SET_ETHTOOL_OPS(dev, &SkGeEthtoolOps); diff --git a/drivers/net/sk_g16.c b/drivers/net/sk_g16.c deleted file mode 100644 index 134ae0e6495..00000000000 --- a/drivers/net/sk_g16.c +++ /dev/null @@ -1,2066 +0,0 @@ -/*- - * Copyright (C) 1994 by PJD Weichmann & SWS Bern, Switzerland - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.c - * - * Version : $Revision: 1.1 $ - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/26 - * Last Updated : $Date: 1994/06/30 16:25:15 $ - * - * Description : Schneider & Koch G16 Ethernet Device Driver for - * Linux Kernel >= 1.1.22 - * Update History : - * Paul Gortmaker, 03/97: Fix for v2.1.x to use read{b,w} - * write{b,w} and memcpy -> memcpy_{to,from}io - * - * Jeff Garzik, 06/2000, Modularize - * --*/ - -static const char rcsid[] = "$Id: sk_g16.c,v 1.1 1994/06/30 16:25:15 root Exp $"; - -/* - * The Schneider & Koch (SK) G16 Network device driver is based - * on the 'ni6510' driver from Michael Hipp which can be found at - * ftp://sunsite.unc.edu/pub/Linux/system/Network/drivers/nidrivers.tar.gz - * - * Sources: 1) ni6510.c by M. Hipp - * 2) depca.c by D.C. Davies - * 3) skeleton.c by D. Becker - * 4) Am7990 Local Area Network Controller for Ethernet (LANCE), - * AMD, Pub. #05698, June 1989 - * - * Many Thanks for helping me to get things working to: - * - * A. Cox (A.Cox@swansea.ac.uk) - * M. Hipp (mhipp@student.uni-tuebingen.de) - * R. Bolz (Schneider & Koch, Germany) - * - * To Do: - * - Support of SK_G8 and other SK Network Cards. - * - Autoset memory mapped RAM. Check for free memory and then - * configure RAM correctly. - * - SK_close should really set card in to initial state. - * - Test if IRQ 3 is not switched off. Use autoirq() functionality. - * (as in /drivers/net/skeleton.c) - * - Implement Multicast addressing. At minimum something like - * in depca.c. - * - Redo the statistics part. - * - Try to find out if the board is in 8 Bit or 16 Bit slot. - * If in 8 Bit mode don't use IRQ 11. - * - (Try to make it slightly faster.) - * - Power management support - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/fcntl.h> -#include <linux/ioport.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/delay.h> -#include <linux/errno.h> -#include <linux/init.h> -#include <linux/spinlock.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> -#include <linux/skbuff.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <asm/io.h> - -#include "sk_g16.h" - -/* - * Schneider & Koch Card Definitions - * ================================= - */ - -#define SK_NAME "SK_G16" - -/* - * SK_G16 Configuration - * -------------------- - */ - -/* - * Abbreviations - * ------------- - * - * RAM - used for the 16KB shared memory - * Boot_ROM, ROM - are used for referencing the BootEPROM - * - * SK_BOOT_ROM and SK_ADDR are symbolic constants used to configure - * the behaviour of the driver and the SK_G16. - * - * ! See sk_g16.install on how to install and configure the driver ! - * - * SK_BOOT_ROM defines if the Boot_ROM should be switched off or not. - * - * SK_ADDR defines the address where the RAM will be mapped into the real - * host memory. - * valid addresses are from 0xa0000 to 0xfc000 in 16Kbyte steps. - */ - -#define SK_BOOT_ROM 1 /* 1=BootROM on 0=off */ - -#define SK_ADDR 0xcc000 - -/* - * In POS3 are bits A14-A19 of the address bus. These bits can be set - * to choose the RAM address. That's why we only can choose the RAM address - * in 16KB steps. - */ - -#define POS_ADDR (rom_addr>>14) /* Do not change this line */ - -/* - * SK_G16 I/O PORT's + IRQ's + Boot_ROM locations - * ---------------------------------------------- - */ - -/* - * As nearly every card has also SK_G16 a specified I/O Port region and - * only a few possible IRQ's. - * In the Installation Guide from Schneider & Koch is listed a possible - * Interrupt IRQ2. IRQ2 is always IRQ9 in boards with two cascaded interrupt - * controllers. So we use in SK_IRQS IRQ9. - */ - -/* Don't touch any of the following #defines. */ - -#define SK_IO_PORTS { 0x100, 0x180, 0x208, 0x220, 0x288, 0x320, 0x328, 0x390, 0 } - -#define SK_IRQS { 3, 5, 9, 11, 0 } - -#define SK_BOOT_ROM_LOCATIONS { 0xc0000, 0xc4000, 0xc8000, 0xcc000, 0xd0000, 0xd4000, 0xd8000, 0xdc000, 0 } - -#define SK_BOOT_ROM_ID { 0x55, 0xaa, 0x10, 0x50, 0x06, 0x33 } - -/* - * SK_G16 POS REGISTERS - * -------------------- - */ - -/* - * SK_G16 has a Programmable Option Select (POS) Register. - * The POS is composed of 8 separate registers (POS0-7) which - * are I/O mapped on an address set by the W1 switch. - * - */ - -#define SK_POS_SIZE 8 /* 8 I/O Ports are used by SK_G16 */ - -#define SK_POS0 ioaddr /* Card-ID Low (R) */ -#define SK_POS1 ioaddr+1 /* Card-ID High (R) */ -#define SK_POS2 ioaddr+2 /* Card-Enable, Boot-ROM Disable (RW) */ -#define SK_POS3 ioaddr+3 /* Base address of RAM */ -#define SK_POS4 ioaddr+4 /* IRQ */ - -/* POS5 - POS7 are unused */ - -/* - * SK_G16 MAC PREFIX - * ----------------- - */ - -/* - * Scheider & Koch manufacturer code (00:00:a5). - * This must be checked, that we are sure it is a SK card. - */ - -#define SK_MAC0 0x00 -#define SK_MAC1 0x00 -#define SK_MAC2 0x5a - -/* - * SK_G16 ID - * --------- - */ - -/* - * If POS0,POS1 contain the following ID, then we know - * at which I/O Port Address we are. - */ - -#define SK_IDLOW 0xfd -#define SK_IDHIGH 0x6a - - -/* - * LANCE POS Bit definitions - * ------------------------- - */ - -#define SK_ROM_RAM_ON (POS2_CARD) -#define SK_ROM_RAM_OFF (POS2_EPROM) -#define SK_ROM_ON (inb(SK_POS2) & POS2_CARD) -#define SK_ROM_OFF (inb(SK_POS2) | POS2_EPROM) -#define SK_RAM_ON (inb(SK_POS2) | POS2_CARD) -#define SK_RAM_OFF (inb(SK_POS2) & POS2_EPROM) - -#define POS2_CARD 0x0001 /* 1 = SK_G16 on 0 = off */ -#define POS2_EPROM 0x0002 /* 1 = Boot EPROM off 0 = on */ - -/* - * SK_G16 Memory mapped Registers - * ------------------------------ - * - */ - -#define SK_IOREG (&board->ioreg) /* LANCE data registers. */ -#define SK_PORT (&board->port) /* Control, Status register */ -#define SK_IOCOM (&board->iocom) /* I/O Command */ - -/* - * SK_G16 Status/Control Register bits - * ----------------------------------- - * - * (C) Controlreg (S) Statusreg - */ - -/* - * Register transfer: 0 = no transfer - * 1 = transferring data between LANCE and I/O reg - */ -#define SK_IORUN 0x20 - -/* - * LANCE interrupt: 0 = LANCE interrupt occurred - * 1 = no LANCE interrupt occurred - */ -#define SK_IRQ 0x10 - -#define SK_RESET 0x08 /* Reset SK_CARD: 0 = RESET 1 = normal */ -#define SK_RW 0x02 /* 0 = write to 1 = read from */ -#define SK_ADR 0x01 /* 0 = REG DataPort 1 = RAP Reg addr port */ - - -#define SK_RREG SK_RW /* Transferdirection to read from lance */ -#define SK_WREG 0 /* Transferdirection to write to lance */ -#define SK_RAP SK_ADR /* Destination Register RAP */ -#define SK_RDATA 0 /* Destination Register REG DataPort */ - -/* - * SK_G16 I/O Command - * ------------------ - */ - -/* - * Any bitcombination sets the internal I/O bit (transfer will start) - * when written to I/O Command - */ - -#define SK_DOIO 0x80 /* Do Transfer */ - -/* - * LANCE RAP (Register Address Port). - * --------------------------------- - */ - -/* - * The LANCE internal registers are selected through the RAP. - * The Registers are: - * - * CSR0 - Status and Control flags - * CSR1 - Low order bits of initialize block (bits 15:00) - * CSR2 - High order bits of initialize block (bits 07:00, 15:08 are reserved) - * CSR3 - Allows redefinition of the Bus Master Interface. - * This register must be set to 0x0002, which means BSWAP = 0, - * ACON = 1, BCON = 0; - * - */ - -#define CSR0 0x00 -#define CSR1 0x01 -#define CSR2 0x02 -#define CSR3 0x03 - -/* - * General Definitions - * =================== - */ - -/* - * Set the number of Tx and Rx buffers, using Log_2(# buffers). - * We have 16KB RAM which can be accessed by the LANCE. In the - * memory are not only the buffers but also the ring descriptors and - * the initialize block. - * Don't change anything unless you really know what you do. - */ - -#define LC_LOG_TX_BUFFERS 1 /* (2 == 2^^1) 2 Transmit buffers */ -#define LC_LOG_RX_BUFFERS 3 /* (8 == 2^^3) 8 Receive buffers */ - -/* Descriptor ring sizes */ - -#define TMDNUM (1 << (LC_LOG_TX_BUFFERS)) /* 2 Transmit descriptor rings */ -#define RMDNUM (1 << (LC_LOG_RX_BUFFERS)) /* 8 Receive Buffers */ - -/* Define Mask for setting RMD, TMD length in the LANCE init_block */ - -#define TMDNUMMASK (LC_LOG_TX_BUFFERS << 29) -#define RMDNUMMASK (LC_LOG_RX_BUFFERS << 29) - -/* - * Data Buffer size is set to maximum packet length. - */ - -#define PKT_BUF_SZ 1518 - -/* - * The number of low I/O ports used by the ethercard. - */ - -#define ETHERCARD_TOTAL_SIZE SK_POS_SIZE - -/* - * SK_DEBUG - * - * Here you can choose what level of debugging wanted. - * - * If SK_DEBUG and SK_DEBUG2 are undefined, then only the - * necessary messages will be printed. - * - * If SK_DEBUG is defined, there will be many debugging prints - * which can help to find some mistakes in configuration or even - * in the driver code. - * - * If SK_DEBUG2 is defined, many many messages will be printed - * which normally you don't need. I used this to check the interrupt - * routine. - * - * (If you define only SK_DEBUG2 then only the messages for - * checking interrupts will be printed!) - * - * Normal way of live is: - * - * For the whole thing get going let both symbolic constants - * undefined. If you face any problems and you know what's going - * on (you know something about the card and you can interpret some - * hex LANCE register output) then define SK_DEBUG - * - */ - -#undef SK_DEBUG /* debugging */ -#undef SK_DEBUG2 /* debugging with more verbose report */ - -#ifdef SK_DEBUG -#define PRINTK(x) printk x -#else -#define PRINTK(x) /**/ -#endif - -#ifdef SK_DEBUG2 -#define PRINTK2(x) printk x -#else -#define PRINTK2(x) /**/ -#endif - -/* - * SK_G16 RAM - * - * The components are memory mapped and can be set in a region from - * 0x00000 through 0xfc000 in 16KB steps. - * - * The Network components are: dual ported RAM, Prom, I/O Reg, Status-, - * Controlregister and I/O Command. - * - * dual ported RAM: This is the only memory region which the LANCE chip - * has access to. From the Lance it is addressed from 0x0000 to - * 0x3fbf. The host accesses it normally. - * - * PROM: The PROM obtains the ETHERNET-MAC-Address. It is realised as a - * 8-Bit PROM, this means only the 16 even addresses are used of the - * 32 Byte Address region. Access to an odd address results in invalid - * data. - * - * LANCE I/O Reg: The I/O Reg is build of 4 single Registers, Low-Byte Write, - * Hi-Byte Write, Low-Byte Read, Hi-Byte Read. - * Transfer from or to the LANCE is always in 16Bit so Low and High - * registers are always relevant. - * - * The Data from the Readregister is not the data in the Writeregister!! - * - * Port: Status- and Controlregister. - * Two different registers which share the same address, Status is - * read-only, Control is write-only. - * - * I/O Command: - * Any bitcombination written in here starts the transmission between - * Host and LANCE. - */ - -typedef struct -{ - unsigned char ram[0x3fc0]; /* 16KB dual ported ram */ - unsigned char rom[0x0020]; /* 32Byte PROM containing 6Byte MAC */ - unsigned char res1[0x0010]; /* reserved */ - unsigned volatile short ioreg;/* LANCE I/O Register */ - unsigned volatile char port; /* Statusregister and Controlregister */ - unsigned char iocom; /* I/O Command Register */ -} SK_RAM; - -/* struct */ - -/* - * This is the structure for the dual ported ram. We - * have exactly 16 320 Bytes. In here there must be: - * - * - Initialize Block (starting at a word boundary) - * - Receive and Transmit Descriptor Rings (quadword boundary) - * - Data Buffers (arbitrary boundary) - * - * This is because LANCE has on SK_G16 only access to the dual ported - * RAM and nowhere else. - */ - -struct SK_ram -{ - struct init_block ib; - struct tmd tmde[TMDNUM]; - struct rmd rmde[RMDNUM]; - char tmdbuf[TMDNUM][PKT_BUF_SZ]; - char rmdbuf[RMDNUM][PKT_BUF_SZ]; -}; - -/* - * Structure where all necessary information is for ring buffer - * management and statistics. - */ - -struct priv -{ - struct SK_ram *ram; /* dual ported ram structure */ - struct rmd *rmdhead; /* start of receive ring descriptors */ - struct tmd *tmdhead; /* start of transmit ring descriptors */ - int rmdnum; /* actual used ring descriptor */ - int tmdnum; /* actual transmit descriptor for transmitting data */ - int tmdlast; /* last sent descriptor used for error handling, etc */ - void *rmdbufs[RMDNUM]; /* pointer to the receive buffers */ - void *tmdbufs[TMDNUM]; /* pointer to the transmit buffers */ - struct net_device_stats stats; /* Device driver statistics */ -}; - -/* global variable declaration */ - -/* IRQ map used to reserve a IRQ (see SK_open()) */ - -/* static variables */ - -static SK_RAM *board; /* pointer to our memory mapped board components */ -static DEFINE_SPINLOCK(SK_lock); - -/* Macros */ - - -/* Function Prototypes */ - -/* - * Device Driver functions - * ----------------------- - * See for short explanation of each function its definitions header. - */ - -static int SK_probe(struct net_device *dev, short ioaddr); - -static void SK_timeout(struct net_device *dev); -static int SK_open(struct net_device *dev); -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev); -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs); -static void SK_rxintr(struct net_device *dev); -static void SK_txintr(struct net_device *dev); -static int SK_close(struct net_device *dev); - -static struct net_device_stats *SK_get_stats(struct net_device *dev); - -unsigned int SK_rom_addr(void); - -static void set_multicast_list(struct net_device *dev); - -/* - * LANCE Functions - * --------------- - */ - -static int SK_lance_init(struct net_device *dev, unsigned short mode); -void SK_reset_board(void); -void SK_set_RAP(int reg_number); -int SK_read_reg(int reg_number); -int SK_rread_reg(void); -void SK_write_reg(int reg_number, int value); - -/* - * Debugging functions - * ------------------- - */ - -void SK_print_pos(struct net_device *dev, char *text); -void SK_print_dev(struct net_device *dev, char *text); -void SK_print_ram(struct net_device *dev); - - -/*- - * Function : SK_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Check for a SK_G16 network adaptor and initialize it. - * This function gets called by dev_init which initializes - * all Network devices. - * - * Parameters : I : struct net_device *dev - structure preconfigured - * from Space.c - * Return Value : 0 = Driver Found and initialized - * Errors : ENODEV - no device found - * ENXIO - not probed - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int io; /* 0 == probe */ - -/* - * Check for a network adaptor of this type, and return '0' if one exists. - * If dev->base_addr == 0, probe all likely locations. - * If dev->base_addr == 1, always return failure. - */ - -struct net_device * __init SK_init(int unit) -{ - int *port, ports[] = SK_IO_PORTS; /* SK_G16 supported ports */ - static unsigned version_printed; - struct net_device *dev = alloc_etherdev(sizeof(struct priv)); - int err = -ENODEV; - - if (!dev) - return ERR_PTR(-ENOMEM); - - if (unit >= 0) { - sprintf(dev->name, "eth%d", unit); - netdev_boot_setup_check(dev); - io = dev->base_addr; - } - - if (version_printed++ == 0) - PRINTK(("%s: %s", SK_NAME, rcsid)); - - if (io > 0xff) { /* Check a single specified address */ - err = -EBUSY; - /* Check if on specified address is a SK_G16 */ - if (request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) { - err = SK_probe(dev, io); - if (!err) - goto got_it; - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } else if (io > 0) { /* Don't probe at all */ - err = -ENXIO; - } else { - /* Autoprobe base_addr */ - for (port = &ports[0]; *port; port++) { - io = *port; - - /* Check if I/O Port region is used by another board */ - if (!request_region(io, ETHERCARD_TOTAL_SIZE, "sk_g16")) - continue; /* Try next Port address */ - - /* Check if at ioaddr is a SK_G16 */ - if (SK_probe(dev, io) == 0) - goto got_it; - - release_region(io, ETHERCARD_TOTAL_SIZE); - } - } -err_out: - free_netdev(dev); - return ERR_PTR(err); - -got_it: - err = register_netdev(dev); - if (err) { - release_region(dev->base_addr, ETHERCARD_TOTAL_SIZE); - goto err_out; - } - return dev; - -} /* End of SK_init */ - - -MODULE_AUTHOR("Patrick J.D. Weichmann"); -MODULE_DESCRIPTION("Schneider & Koch G16 Ethernet Device Driver"); -MODULE_LICENSE("GPL"); -MODULE_PARM(io, "i"); -MODULE_PARM_DESC(io, "0 to probe common ports (unsafe), or the I/O base of the board"); - - -#ifdef MODULE - -static struct net_device *SK_dev; - -static int __init SK_init_module (void) -{ - SK_dev = SK_init(-1); - return IS_ERR(SK_dev) ? PTR_ERR(SK_dev) : 0; -} - -static void __exit SK_cleanup_module (void) -{ - unregister_netdev(SK_dev); - release_region(SK_dev->base_addr, ETHERCARD_TOTAL_SIZE); - free_netdev(SK_dev); -} - -module_init(SK_init_module); -module_exit(SK_cleanup_module); -#endif - - -/*- - * Function : SK_probe - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called by SK_init and - * does the main part of initialization. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : short ioaddr - I/O Port address where POS is. - * Return Value : 0 = Initialization done - * Errors : ENODEV - No SK_G16 found - * -1 - Configuration problem - * Globals : board - pointer to SK_RAM - * Update History : - * YY/MM/DD uid Description - * 94/06/30 pwe SK_ADDR now checked and at the correct place --*/ - -int __init SK_probe(struct net_device *dev, short ioaddr) -{ - int i,j; /* Counters */ - int sk_addr_flag = 0; /* SK ADDR correct? 1 - no, 0 - yes */ - unsigned int rom_addr; /* used to store RAM address used for POS_ADDR */ - - struct priv *p = netdev_priv(dev); /* SK_G16 private structure */ - - if (inb(SK_POS0) != SK_IDLOW || inb(SK_POS1) != SK_IDHIGH) - return -ENODEV; - dev->base_addr = ioaddr; - - if (SK_ADDR & 0x3fff || SK_ADDR < 0xa0000) - { - - sk_addr_flag = 1; - - /* - * Now here we could use a routine which searches for a free - * place in the ram and set SK_ADDR if found. TODO. - */ - } - - if (SK_BOOT_ROM) /* Shall we keep Boot_ROM on ? */ - { - PRINTK(("## %s: SK_BOOT_ROM is set.\n", SK_NAME)); - - rom_addr = SK_rom_addr(); - - if (rom_addr == 0) /* No Boot_ROM found */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; /* assign predefined address */ - - PRINTK(("## %s: NO Bootrom found \n", SK_NAME)); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else if (rom_addr == SK_ADDR) - { - printk("%s: RAM + ROM are set to the same address %#08x\n" - " Check configuration. Now switching off Boot_ROM\n", - SK_NAME, rom_addr); - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off*/ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - else - { - PRINTK(("## %s: Found ROM at %#08x\n", SK_NAME, rom_addr)); - PRINTK(("## %s: Keeping Boot_ROM on\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - outb(SK_ROM_RAM_ON, SK_POS2); /* RAM on, BOOT_ROM on */ - } - } - else /* Don't keep Boot_ROM */ - { - PRINTK(("## %s: SK_BOOT_ROM is not set.\n", SK_NAME)); - - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_rom_addr(); /* Try to find a Boot_ROM */ - - /* IF we find a Boot_ROM disable it */ - - outb(SK_ROM_RAM_OFF, SK_POS2); /* Boot_ROM + RAM off */ - - /* We found a Boot_ROM and it's gone. Set RAM address on - * Boot_ROM address. - */ - - if (rom_addr) - { - printk("%s: We found Boot_ROM at %#08x. Now setting RAM on" - "that address\n", SK_NAME, rom_addr); - - outb(POS_ADDR, SK_POS3); /* Set RAM on Boot_ROM address */ - } - else /* We did not find a Boot_ROM, use predefined SK_ADDR for ram */ - { - if (sk_addr_flag) /* No or Invalid SK_ADDR is defined */ - { - printk("%s: SK_ADDR %#08x is not valid. Check configuration.\n", - dev->name, SK_ADDR); - return -1; - } - - rom_addr = SK_ADDR; - - outb(POS_ADDR, SK_POS3); /* Set RAM address */ - } - outb(SK_RAM_ON, SK_POS2); /* enable RAM */ - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "POS registers after ROM, RAM config"); -#endif - - board = (SK_RAM *) isa_bus_to_virt(rom_addr); - - /* Read in station address */ - for (i = 0, j = 0; i < ETH_ALEN; i++, j+=2) - { - dev->dev_addr[i] = readb(board->rom+j); - } - - /* Check for manufacturer code */ - if (!(dev->dev_addr[0] == SK_MAC0 && - dev->dev_addr[1] == SK_MAC1 && - dev->dev_addr[2] == SK_MAC2) ) - { - PRINTK(("## %s: We did not find SK_G16 at RAM location.\n", - SK_NAME)); - return -ENODEV; /* NO SK_G16 found */ - } - - printk("%s: %s found at %#3x, HW addr: %#04x:%02x:%02x:%02x:%02x:%02x\n", - dev->name, - "Schneider & Koch Netcard", - (unsigned int) dev->base_addr, - dev->dev_addr[0], - dev->dev_addr[1], - dev->dev_addr[2], - dev->dev_addr[3], - dev->dev_addr[4], - dev->dev_addr[5]); - - memset((char *) dev->priv, 0, sizeof(struct priv)); /* clear memory */ - - /* Assign our Device Driver functions */ - - dev->open = SK_open; - dev->stop = SK_close; - dev->hard_start_xmit = SK_send_packet; - dev->get_stats = SK_get_stats; - dev->set_multicast_list = set_multicast_list; - dev->tx_timeout = SK_timeout; - dev->watchdog_timeo = HZ/7; - - - dev->flags &= ~IFF_MULTICAST; - - /* Initialize private structure */ - - p->ram = (struct SK_ram *) rom_addr; /* Set dual ported RAM addr */ - p->tmdhead = &(p->ram)->tmde[0]; /* Set TMD head */ - p->rmdhead = &(p->ram)->rmde[0]; /* Set RMD head */ - - /* Initialize buffer pointers */ - - for (i = 0; i < TMDNUM; i++) - { - p->tmdbufs[i] = &(p->ram)->tmdbuf[i]; - } - - for (i = 0; i < RMDNUM; i++) - { - p->rmdbufs[i] = &(p->ram)->rmdbuf[i]; - } - -#ifdef SK_DEBUG - SK_print_pos(dev, "End of SK_probe"); - SK_print_ram(dev); -#endif - return 0; /* Initialization done */ -} /* End of SK_probe() */ - - -/*- - * Function : SK_open - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function is called sometimes after booting - * when ifconfig program is run. - * - * This function requests an IRQ, sets the correct - * IRQ in the card. Then calls SK_lance_init() to - * init and start the LANCE chip. Then if everything is - * ok returns with 0 (OK), which means SK_G16 is now - * opened and operational. - * - * (Called by dev_open() /net/inet/dev.c) - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - Device opened - * Errors : -EAGAIN - Open failed - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_open(struct net_device *dev) -{ - int i = 0; - int irqval = 0; - int ioaddr = dev->base_addr; - - int irqtab[] = SK_IRQS; - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: At beginning of SK_open(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev->irq == 0) /* Autoirq */ - { - i = 0; - - /* - * Check if one IRQ out of SK_IRQS is free and install - * interrupt handler. - * Most done by request_irq(). - * irqval: 0 - interrupt handler installed for IRQ irqtab[i] - * -EBUSY - interrupt busy - * -EINVAL - irq > 15 or handler = NULL - */ - - do - { - irqval = request_irq(irqtab[i], &SK_interrupt, 0, "sk_g16", dev); - i++; - } while (irqval && irqtab[i]); - - if (irqval) /* We tried every possible IRQ but no success */ - { - printk("%s: unable to get an IRQ\n", dev->name); - return -EAGAIN; - } - - dev->irq = irqtab[--i]; - - outb(i<<2, SK_POS4); /* Set Card on probed IRQ */ - - } - else if (dev->irq == 2) /* IRQ2 is always IRQ9 */ - { - if (request_irq(9, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get IRQ 9\n", dev->name); - return -EAGAIN; - } - dev->irq = 9; - - /* - * Now we set card on IRQ2. - * This can be confusing, but remember that IRQ2 on the network - * card is in reality IRQ9 - */ - outb(0x08, SK_POS4); /* set card to IRQ2 */ - - } - else /* Check IRQ as defined in Space.c */ - { - int i = 0; - - /* check if IRQ free and valid. Then install Interrupt handler */ - - if (request_irq(dev->irq, &SK_interrupt, 0, "sk_g16", dev)) - { - printk("%s: unable to get selected IRQ\n", dev->name); - return -EAGAIN; - } - - switch(dev->irq) - { - case 3: i = 0; - break; - case 5: i = 1; - break; - case 2: i = 2; - break; - case 11:i = 3; - break; - default: - printk("%s: Preselected IRQ %d is invalid for %s boards", - dev->name, - dev->irq, - SK_NAME); - return -EAGAIN; - } - - outb(i<<2, SK_POS4); /* Set IRQ on card */ - } - - printk("%s: Schneider & Koch G16 at %#3x, IRQ %d, shared mem at %#08x\n", - dev->name, (unsigned int)dev->base_addr, - (int) dev->irq, (unsigned int) p->ram); - - if (!(i = SK_lance_init(dev, 0))) /* LANCE init OK? */ - { - netif_start_queue(dev); - -#ifdef SK_DEBUG - - /* - * This debug block tries to stop LANCE, - * reinit LANCE with transmitter and receiver disabled, - * then stop again and reinit with NORMAL_MODE - */ - - printk("## %s: After lance init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_DTX | MODE_DRX); - printk("## %s: Reinit with DTX + DRX off. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_write_reg(CSR0, CSR0_STOP); - printk("## %s: LANCE stopped. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_lance_init(dev, MODE_NORMAL); - printk("## %s: LANCE back to normal mode. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0)); - SK_print_pos(dev, "POS regs before returning OK"); - -#endif /* SK_DEBUG */ - - return 0; /* SK_open() is successful */ - } - else /* LANCE init failed */ - { - - PRINTK(("## %s: LANCE init failed: CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return -EAGAIN; - } - -} /* End of SK_open() */ - - -/*- - * Function : SK_lance_init - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Reset LANCE chip, fill RMD, TMD structures with - * start values and Start LANCE. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : int mode - put LANCE into "mode" see data-sheet for - * more info. - * Return Value : 0 - Init done - * Errors : -1 - Init failed - * Update History : - * YY/MM/DD uid Description --*/ - -static int SK_lance_init(struct net_device *dev, unsigned short mode) -{ - int i; - unsigned long flags; - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - struct rmd *rmdp; - - PRINTK(("## %s: At beginning of LANCE init. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Reset LANCE */ - SK_reset_board(); - - /* Initialize TMD's with start values */ - p->tmdnum = 0; /* First descriptor for transmitting */ - p->tmdlast = 0; /* First descriptor for reading stats */ - - for (i = 0; i < TMDNUM; i++) /* Init all TMD's */ - { - tmdp = p->tmdhead + i; - - writel((unsigned long) p->tmdbufs[i], tmdp->u.buffer); /* assign buffer */ - - /* Mark TMD as start and end of packet */ - writeb(TX_STP | TX_ENP, &tmdp->u.s.status); - } - - - /* Initialize RMD's with start values */ - - p->rmdnum = 0; /* First RMD which will be used */ - - for (i = 0; i < RMDNUM; i++) /* Init all RMD's */ - { - rmdp = p->rmdhead + i; - - - writel((unsigned long) p->rmdbufs[i], rmdp->u.buffer); /* assign buffer */ - - /* - * LANCE must be owner at beginning so that he can fill in - * receiving packets, set status and release RMD - */ - - writeb(RX_OWN, &rmdp->u.s.status); - - writew(-PKT_BUF_SZ, &rmdp->blen); /* Buffer Size (two's complement) */ - - writeb(0, &rmdp->mlen); /* init message length */ - - } - - /* Fill LANCE Initialize Block */ - - writew(mode, (&((p->ram)->ib.mode))); /* Set operation mode */ - - for (i = 0; i < ETH_ALEN; i++) /* Set physical address */ - { - writeb(dev->dev_addr[i], (&((p->ram)->ib.paddr[i]))); - } - - for (i = 0; i < 8; i++) /* Set multicast, logical address */ - { - writeb(0, (&((p->ram)->ib.laddr[i]))); /* We do not use logical addressing */ - } - - /* Set ring descriptor pointers and set number of descriptors */ - - writel((int)p->rmdhead | RMDNUMMASK, (&((p->ram)->ib.rdrp))); - writel((int)p->tmdhead | TMDNUMMASK, (&((p->ram)->ib.tdrp))); - - /* Prepare LANCE Control and Status Registers */ - - spin_lock_irqsave(&SK_lock, flags); - - SK_write_reg(CSR3, CSR3_ACON); /* Ale Control !!!THIS MUST BE SET!!!! */ - - /* - * LANCE addresses the RAM from 0x0000 to 0x3fbf and has no access to - * PC Memory locations. - * - * In structure SK_ram is defined that the first thing in ram - * is the initialization block. So his address is for LANCE always - * 0x0000 - * - * CSR1 contains low order bits 15:0 of initialization block address - * CSR2 is built of: - * 7:0 High order bits 23:16 of initialization block address - * 15:8 reserved, must be 0 - */ - - /* Set initialization block address (must be on word boundary) */ - SK_write_reg(CSR1, 0); /* Set low order bits 15:0 */ - SK_write_reg(CSR2, 0); /* Set high order bits 23:16 */ - - - PRINTK(("## %s: After setting CSR1-3. CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - /* Initialize LANCE */ - - /* - * INIT = Initialize, when set, causes the LANCE to begin the - * initialization procedure and access the Init Block. - */ - - SK_write_reg(CSR0, CSR0_INIT); - - spin_unlock_irqrestore(&SK_lock, flags); - - /* Wait until LANCE finished initialization */ - - SK_set_RAP(CSR0); /* Register Address Pointer to CSR0 */ - - for (i = 0; (i < 100) && !(SK_rread_reg() & CSR0_IDON); i++) - ; /* Wait until init done or go ahead if problems (i>=100) */ - - if (i >= 100) /* Something is wrong ! */ - { - printk("%s: can't init am7990, status: %04x " - "init_block: %#08x\n", - dev->name, (int) SK_read_reg(CSR0), - (unsigned int) &(p->ram)->ib); - -#ifdef SK_DEBUG - SK_print_pos(dev, "LANCE INIT failed"); - SK_print_dev(dev,"Device Structure:"); -#endif - - return -1; /* LANCE init failed */ - } - - PRINTK(("## %s: init done after %d ticks\n", SK_NAME, i)); - - /* Clear Initialize done, enable Interrupts, start LANCE */ - - SK_write_reg(CSR0, CSR0_IDON | CSR0_INEA | CSR0_STRT); - - PRINTK(("## %s: LANCE started. CSR0: %#06x\n", SK_NAME, - SK_read_reg(CSR0))); - - return 0; /* LANCE is up and running */ - -} /* End of SK_lance_init() */ - - - -/*- - * Function : SK_send_packet - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Writes an socket buffer into a transmit descriptor - * and starts transmission. - * - * Parameters : I : struct sk_buff *skb - packet to transfer - * I : struct net_device *dev - SK_G16 device structure - * Return Value : 0 - OK - * 1 - Could not transmit (dev_queue_xmit will queue it) - * and try to sent it later - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_timeout(struct net_device *dev) -{ - printk(KERN_WARNING "%s: xmitter timed out, try to restart!\n", dev->name); - SK_lance_init(dev, MODE_NORMAL); /* Reinit LANCE */ - netif_wake_queue(dev); /* Clear Transmitter flag */ - dev->trans_start = jiffies; /* Mark Start of transmission */ -} - -static int SK_send_packet(struct sk_buff *skb, struct net_device *dev) -{ - struct priv *p = netdev_priv(dev); - struct tmd *tmdp; - static char pad[64]; - - PRINTK2(("## %s: SK_send_packet() called, CSR0 %#04x.\n", - SK_NAME, SK_read_reg(CSR0))); - - - /* - * Block a timer-based transmit from overlapping. - * This means check if we are already in. - */ - - netif_stop_queue (dev); - - { - - /* Evaluate Packet length */ - short len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN; - - tmdp = p->tmdhead + p->tmdnum; /* Which descriptor for transmitting */ - - /* Fill in Transmit Message Descriptor */ - - /* Copy data into dual ported ram */ - - memcpy_toio((tmdp->u.buffer & 0x00ffffff), skb->data, skb->len); - if (len != skb->len) - memcpy_toio((tmdp->u.buffer & 0x00ffffff) + skb->len, pad, len-skb->len); - - writew(-len, &tmdp->blen); /* set length to transmit */ - - /* - * Packet start and end is always set because we use the maximum - * packet length as buffer length. - * Relinquish ownership to LANCE - */ - - writeb(TX_OWN | TX_STP | TX_ENP, &tmdp->u.s.status); - - /* Start Demand Transmission */ - SK_write_reg(CSR0, CSR0_TDMD | CSR0_INEA); - - dev->trans_start = jiffies; /* Mark start of transmission */ - - /* Set pointer to next transmit buffer */ - p->tmdnum++; - p->tmdnum &= TMDNUM-1; - - /* Do we own the next transmit buffer ? */ - if (! (readb(&((p->tmdhead + p->tmdnum)->u.s.status)) & TX_OWN) ) - { - /* - * We own next buffer and are ready to transmit, so - * clear busy flag - */ - netif_start_queue(dev); - } - - p->stats.tx_bytes += skb->len; - - } - - dev_kfree_skb(skb); - return 0; -} /* End of SK_send_packet */ - - -/*- - * Function : SK_interrupt - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : SK_G16 interrupt handler which checks for LANCE - * Errors, handles transmit and receive interrupts - * - * Parameters : I : int irq, void *dev_id, struct pt_regs * regs - - * Return Value : None - * Errors : None - * Globals : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static irqreturn_t SK_interrupt(int irq, void *dev_id, struct pt_regs * regs) -{ - int csr0; - struct net_device *dev = dev_id; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_interrupt(). status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - if (dev == NULL) - { - printk("SK_interrupt(): IRQ %d for unknown device.\n", irq); - } - - spin_lock (&SK_lock); - - csr0 = SK_read_reg(CSR0); /* store register for checking */ - - /* - * Acknowledge all of the current interrupt sources, disable - * Interrupts (INEA = 0) - */ - - SK_write_reg(CSR0, csr0 & CSR0_CLRALL); - - if (csr0 & CSR0_ERR) /* LANCE Error */ - { - printk("%s: error: %04x\n", dev->name, csr0); - - if (csr0 & CSR0_MISS) /* No place to store packet ? */ - { - p->stats.rx_dropped++; - } - } - - if (csr0 & CSR0_RINT) /* Receive Interrupt (packet arrived) */ - { - SK_rxintr(dev); - } - - if (csr0 & CSR0_TINT) /* Transmit interrupt (packet sent) */ - { - SK_txintr(dev); - } - - SK_write_reg(CSR0, CSR0_INEA); /* Enable Interrupts */ - - spin_unlock (&SK_lock); - return IRQ_HANDLED; -} /* End of SK_interrupt() */ - - -/*- - * Function : SK_txintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : After sending a packet we check status, update - * statistics and relinquish ownership of transmit - * descriptor ring. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_txintr(struct net_device *dev) -{ - int tmdstat; - struct tmd *tmdp; - struct priv *p = netdev_priv(dev); - - - PRINTK2(("## %s: SK_txintr() status: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - tmdp = p->tmdhead + p->tmdlast; /* Which buffer we sent at last ? */ - - /* Set next buffer */ - p->tmdlast++; - p->tmdlast &= TMDNUM-1; - - tmdstat = readb(&tmdp->u.s.status); - - /* - * We check status of transmitted packet. - * see LANCE data-sheet for error explanation - */ - if (tmdstat & TX_ERR) /* Error occurred */ - { - int stat2 = readw(&tmdp->status2); - - printk("%s: TX error: %04x %04x\n", dev->name, tmdstat, stat2); - - if (stat2 & TX_TDR) /* TDR problems? */ - { - printk("%s: tdr-problems \n", dev->name); - } - - if (stat2 & TX_RTRY) /* Failed in 16 attempts to transmit ? */ - p->stats.tx_aborted_errors++; - if (stat2 & TX_LCOL) /* Late collision ? */ - p->stats.tx_window_errors++; - if (stat2 & TX_LCAR) /* Loss of Carrier ? */ - p->stats.tx_carrier_errors++; - if (stat2 & TX_UFLO) /* Underflow error ? */ - { - p->stats.tx_fifo_errors++; - - /* - * If UFLO error occurs it will turn transmitter of. - * So we must reinit LANCE - */ - - SK_lance_init(dev, MODE_NORMAL); - } - - p->stats.tx_errors++; - - writew(0, &tmdp->status2); /* Clear error flags */ - } - else if (tmdstat & TX_MORE) /* Collisions occurred ? */ - { - /* - * Here I have a problem. - * I only know that there must be one or up to 15 collisions. - * That's why TX_MORE is set, because after 16 attempts TX_RTRY - * will be set which means couldn't send packet aborted transfer. - * - * First I did not have this in but then I thought at minimum - * we see that something was not ok. - * If anyone knows something better than this to handle this - * please report it. - */ - - p->stats.collisions++; - } - else /* Packet sent without any problems */ - { - p->stats.tx_packets++; - } - - /* - * We mark transmitter not busy anymore, because now we have a free - * transmit descriptor which can be filled by SK_send_packet and - * afterwards sent by the LANCE - * - * The function which do handle slow IRQ parts is do_bottom_half() - * which runs at normal kernel priority, that means all interrupt are - * enabled. (see kernel/irq.c) - * - * net_bh does something like this: - * - check if already in net_bh - * - try to transmit something from the send queue - * - if something is in the receive queue send it up to higher - * levels if it is a known protocol - * - try to transmit something from the send queue - */ - - netif_wake_queue(dev); - -} /* End of SK_txintr() */ - - -/*- - * Function : SK_rxintr - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/27 - * - * Description : Buffer sent, check for errors, relinquish ownership - * of the receive message descriptor. - * - * Parameters : I : SK_G16 device structure - * Return Value : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -static void SK_rxintr(struct net_device *dev) -{ - - struct rmd *rmdp; - int rmdstat; - struct priv *p = netdev_priv(dev); - - PRINTK2(("## %s: SK_rxintr(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - rmdp = p->rmdhead + p->rmdnum; - - /* As long as we own the next entry, check status and send - * it up to higher layer - */ - - while (!( (rmdstat = readb(&rmdp->u.s.status)) & RX_OWN)) - { - /* - * Start and end of packet must be set, because we use - * the ethernet maximum packet length (1518) as buffer size. - * - * Because our buffers are at maximum OFLO and BUFF errors are - * not to be concerned (see Data sheet) - */ - - if ((rmdstat & (RX_STP | RX_ENP)) != (RX_STP | RX_ENP)) - { - /* Start of a frame > 1518 Bytes ? */ - - if (rmdstat & RX_STP) - { - p->stats.rx_errors++; /* bad packet received */ - p->stats.rx_length_errors++; /* packet too long */ - - printk("%s: packet too long\n", dev->name); - } - - /* - * All other packets will be ignored until a new frame with - * start (RX_STP) set follows. - * - * What we do is just give descriptor free for new incoming - * packets. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else if (rmdstat & RX_ERR) /* Receive Error ? */ - { - printk("%s: RX error: %04x\n", dev->name, (int) rmdstat); - - p->stats.rx_errors++; - - if (rmdstat & RX_FRAM) p->stats.rx_frame_errors++; - if (rmdstat & RX_CRC) p->stats.rx_crc_errors++; - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - - } - else /* We have a packet which can be queued for the upper layers */ - { - - int len = readw(&rmdp->mlen) & 0x0fff; /* extract message length from receive buffer */ - struct sk_buff *skb; - - skb = dev_alloc_skb(len+2); /* allocate socket buffer */ - - if (skb == NULL) /* Could not get mem ? */ - { - - /* - * Couldn't allocate sk_buffer so we give descriptor back - * to Lance, update statistics and go ahead. - */ - - writeb(RX_OWN, &rmdp->u.s.status); /* Relinquish ownership to LANCE */ - printk("%s: Couldn't allocate sk_buff, deferring packet.\n", - dev->name); - p->stats.rx_dropped++; - - break; /* Jump out */ - } - - /* Prepare sk_buff to queue for upper layers */ - - skb->dev = dev; - skb_reserve(skb,2); /* Align IP header on 16 byte boundary */ - - /* - * Copy data out of our receive descriptor into sk_buff. - * - * (rmdp->u.buffer & 0x00ffffff) -> get address of buffer and - * ignore status fields) - */ - - memcpy_fromio(skb_put(skb,len), (rmdp->u.buffer & 0x00ffffff), len); - - - /* - * Notify the upper protocol layers that there is another packet - * to handle - * - * netif_rx() always succeeds. see /net/inet/dev.c for more. - */ - - skb->protocol=eth_type_trans(skb,dev); - netif_rx(skb); /* queue packet and mark it for processing */ - - /* - * Packet is queued and marked for processing so we - * free our descriptor and update statistics - */ - - writeb(RX_OWN, &rmdp->u.s.status); - dev->last_rx = jiffies; - p->stats.rx_packets++; - p->stats.rx_bytes += len; - - - p->rmdnum++; - p->rmdnum %= RMDNUM; - - rmdp = p->rmdhead + p->rmdnum; - } - } -} /* End of SK_rxintr() */ - - -/*- - * Function : SK_close - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : close gets called from dev_close() and should - * deinstall the card (free_irq, mem etc). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : 0 - closed device driver - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -/* I have tried to set BOOT_ROM on and RAM off but then, after a 'ifconfig - * down' the system stops. So I don't shut set card to init state. - */ - -static int SK_close(struct net_device *dev) -{ - - PRINTK(("## %s: SK_close(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - netif_stop_queue(dev); /* Transmitter busy */ - - printk("%s: Shutting %s down CSR0 %#06x\n", dev->name, SK_NAME, - (int) SK_read_reg(CSR0)); - - SK_write_reg(CSR0, CSR0_STOP); /* STOP the LANCE */ - - free_irq(dev->irq, dev); /* Free IRQ */ - - return 0; /* always succeed */ - -} /* End of SK_close() */ - - -/*- - * Function : SK_get_stats - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : Return current status structure to upper layers. - * It is called by sprintf_stats (dev.c). - * - * Parameters : I : struct net_device *dev - our device structure - * Return Value : struct net_device_stats * - our current statistics - * Errors : None - * Side Effects : None - * Update History : - * YY/MM/DD uid Description --*/ - -static struct net_device_stats *SK_get_stats(struct net_device *dev) -{ - - struct priv *p = netdev_priv(dev); - - PRINTK(("## %s: SK_get_stats(). CSR0: %#06x\n", - SK_NAME, SK_read_reg(CSR0))); - - return &p->stats; /* Return Device status */ - -} /* End of SK_get_stats() */ - - -/*- - * Function : set_multicast_list - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/26 - * - * Description : This function gets called when a program performs - * a SIOCSIFFLAGS call. Ifconfig does this if you call - * 'ifconfig [-]allmulti' which enables or disables the - * Promiscuous mode. - * Promiscuous mode is when the Network card accepts all - * packets, not only the packets which match our MAC - * Address. It is useful for writing a network monitor, - * but it is also a security problem. You have to remember - * that all information on the net is not encrypted. - * - * Parameters : I : struct net_device *dev - SK_G16 device Structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description - * 95/10/18 ACox New multicast calling scheme --*/ - - -/* Set or clear the multicast filter for SK_G16. - */ - -static void set_multicast_list(struct net_device *dev) -{ - - if (dev->flags&IFF_PROMISC) - { - /* Reinitialize LANCE with MODE_PROM set */ - SK_lance_init(dev, MODE_PROM); - } - else if (dev->mc_count==0 && !(dev->flags&IFF_ALLMULTI)) - { - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - } - else - { - /* Multicast with logical address filter on */ - /* Reinitialize LANCE without MODE_PROM */ - SK_lance_init(dev, MODE_NORMAL); - - /* Not implemented yet. */ - } -} /* End of set_multicast_list() */ - - - -/*- - * Function : SK_rom_addr - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/01 - * - * Description : Try to find a Boot_ROM at all possible locations - * - * Parameters : None - * Return Value : Address where Boot_ROM is - * Errors : 0 - Did not find Boot_ROM - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -unsigned int __init SK_rom_addr(void) -{ - int i,j; - int rom_found = 0; - unsigned int rom_location[] = SK_BOOT_ROM_LOCATIONS; - unsigned char rom_id[] = SK_BOOT_ROM_ID; - unsigned char test_byte; - - /* Autodetect Boot_ROM */ - PRINTK(("## %s: Autodetection of Boot_ROM\n", SK_NAME)); - - for (i = 0; (rom_location[i] != 0) && (rom_found == 0); i++) - { - - PRINTK(("## Trying ROM location %#08x", rom_location[i])); - - rom_found = 1; - for (j = 0; j < 6; j++) - { - test_byte = readb(rom_location[i]+j); - PRINTK((" %02x ", *test_byte)); - - if(test_byte != rom_id[j]) - { - rom_found = 0; - } - } - PRINTK(("\n")); - } - - if (rom_found == 1) - { - PRINTK(("## %s: Boot_ROM found at %#08x\n", - SK_NAME, rom_location[(i-1)])); - - return (rom_location[--i]); - } - else - { - PRINTK(("%s: No Boot_ROM found\n", SK_NAME)); - return 0; - } -} /* End of SK_rom_addr() */ - - - -/* LANCE access functions - * - * ! CSR1-3 can only be accessed when in CSR0 the STOP bit is set ! - */ - - -/*- - * Function : SK_reset_board - * - * Author : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : This function resets SK_G16 and all components, but - * POS registers are not changed - * - * Parameters : None - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_reset_board(void) -{ - writeb(0x00, SK_PORT); /* Reset active */ - mdelay(5); /* Delay min 5ms */ - writeb(SK_RESET, SK_PORT); /* Set back to normal operation */ - -} /* End of SK_reset_board() */ - - -/*- - * Function : SK_set_RAP - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set LANCE Register Address Port to register - * for later data transfer. - * - * Parameters : I : reg_number - which CSR to read/write from/to - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_set_RAP(int reg_number) -{ - writew(reg_number, SK_IOREG); - writeb(SK_RESET | SK_RAP | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_set_RAP() */ - - -/*- - * Function : SK_read_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : Set RAP and read data from a LANCE CSR register - * - * Parameters : I : reg_number - which CSR to read from - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_read_reg(int reg_number) -{ - SK_set_RAP(reg_number); - - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_read_reg() */ - - -/*- - * Function : SK_rread_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/28 - * - * Description : Read data from preseted register. - * This function requires that you know which - * Register is actually set. Be aware that CSR1-3 - * can only be accessed when in CSR0 STOP is set. - * - * Return Value : Register contents - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -int SK_rread_reg(void) -{ - writeb(SK_RESET | SK_RDATA | SK_RREG, SK_PORT); - - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); - return (readw(SK_IOREG)); - -} /* End of SK_rread_reg() */ - - -/*- - * Function : SK_write_reg - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function sets the RAP then fills in the - * LANCE I/O Reg and starts Transfer to LANCE. - * It waits until transfer has ended which is max. 7 ms - * and then it returns. - * - * Parameters : I : reg_number - which CSR to write to - * I : value - what value to fill into register - * Return Value : None - * Errors : None - * Globals : SK_RAM *board - SK_RAM structure pointer - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_write_reg(int reg_number, int value) -{ - SK_set_RAP(reg_number); - - writew(value, SK_IOREG); - writeb(SK_RESET | SK_RDATA | SK_WREG, SK_PORT); - writeb(SK_DOIO, SK_IOCOM); - - while (readb(SK_PORT) & SK_IORUN) - barrier(); -} /* End of SK_write_reg */ - - - -/* - * Debugging functions - * ------------------- - */ - -/*- - * Function : SK_print_pos - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function prints out the 4 POS (Programmable - * Option Select) Registers. Used mainly to debug operation. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char * - Text which will be printed as title - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_pos(struct net_device *dev, char *text) -{ - int ioaddr = dev->base_addr; - - unsigned char pos0 = inb(SK_POS0), - pos1 = inb(SK_POS1), - pos2 = inb(SK_POS2), - pos3 = inb(SK_POS3), - pos4 = inb(SK_POS4); - - - printk("## %s: %s.\n" - "## pos0=%#4x pos1=%#4x pos2=%#04x pos3=%#08x pos4=%#04x\n", - SK_NAME, text, pos0, pos1, pos2, (pos3<<14), pos4); - -} /* End of SK_print_pos() */ - - - -/*- - * Function : SK_print_dev - * Author : Patrick J.D. Weichmann - * Date Created : 94/05/25 - * - * Description : This function simply prints out the important fields - * of the device structure. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * I : char *text - Title for printing - * Return Value : None - * Errors : None - * Update History : - * YY/MM/DD uid Description --*/ - -void SK_print_dev(struct net_device *dev, char *text) -{ - if (dev == NULL) - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## DEVICE == NULL\n"); - } - else - { - printk("## %s: Device Structure. %s\n", SK_NAME, text); - printk("## Device Name: %s Base Address: %#06lx IRQ: %d\n", - dev->name, dev->base_addr, dev->irq); - - printk("## next device: %#08x init function: %#08x\n", - (int) dev->next, (int) dev->init); - } - -} /* End of SK_print_dev() */ - - - -/*- - * Function : SK_print_ram - * Author : Patrick J.D. Weichmann - * Date Created : 94/06/02 - * - * Description : This function is used to check how are things set up - * in the 16KB RAM. Also the pointers to the receive and - * transmit descriptor rings and rx and tx buffers locations. - * It contains a minor bug in printing, but has no effect to the values - * only newlines are not correct. - * - * Parameters : I : struct net_device *dev - SK_G16 device structure - * Return Value : None - * Errors : None - * Globals : None - * Update History : - * YY/MM/DD uid Description --*/ - -void __init SK_print_ram(struct net_device *dev) -{ - - int i; - struct priv *p = netdev_priv(dev); - - printk("## %s: RAM Details.\n" - "## RAM at %#08x tmdhead: %#08x rmdhead: %#08x initblock: %#08x\n", - SK_NAME, - (unsigned int) p->ram, - (unsigned int) p->tmdhead, - (unsigned int) p->rmdhead, - (unsigned int) &(p->ram)->ib); - - printk("## "); - - for(i = 0; i < TMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("tmdbufs%d: %#08x ", (i+1), (int) p->tmdbufs[i]); - } - printk("## "); - - for(i = 0; i < RMDNUM; i++) - { - if (!(i % 3)) /* Every third line do a newline */ - { - printk("\n## "); - } - printk("rmdbufs%d: %#08x ", (i+1), (int) p->rmdbufs[i]); - } - printk("\n"); - -} /* End of SK_print_ram() */ - diff --git a/drivers/net/sk_g16.h b/drivers/net/sk_g16.h deleted file mode 100644 index 0a5dc0908a0..00000000000 --- a/drivers/net/sk_g16.h +++ /dev/null @@ -1,165 +0,0 @@ -/*- - * - * This software may be used and distributed according to the terms - * of the GNU General Public License, incorporated herein by reference. - * - * Module : sk_g16.h - * Version : $Revision$ - * - * Author : M.Hipp (mhipp@student.uni-tuebingen.de) - * changes by : Patrick J.D. Weichmann - * - * Date Created : 94/05/25 - * - * Description : In here are all necessary definitions of - * the am7990 (LANCE) chip used for writing a - * network device driver which uses this chip - * - * $Log$ --*/ - -#ifndef SK_G16_H - -#define SK_G16_H - - -/* - * Control and Status Register 0 (CSR0) bit definitions - * - * (R=Readable) (W=Writeable) (S=Set on write) (C-Clear on write) - * - */ - -#define CSR0_ERR 0x8000 /* Error summary (R) */ -#define CSR0_BABL 0x4000 /* Babble transmitter timeout error (RC) */ -#define CSR0_CERR 0x2000 /* Collision Error (RC) */ -#define CSR0_MISS 0x1000 /* Missed packet (RC) */ -#define CSR0_MERR 0x0800 /* Memory Error (RC) */ -#define CSR0_RINT 0x0400 /* Receiver Interrupt (RC) */ -#define CSR0_TINT 0x0200 /* Transmit Interrupt (RC) */ -#define CSR0_IDON 0x0100 /* Initialization Done (RC) */ -#define CSR0_INTR 0x0080 /* Interrupt Flag (R) */ -#define CSR0_INEA 0x0040 /* Interrupt Enable (RW) */ -#define CSR0_RXON 0x0020 /* Receiver on (R) */ -#define CSR0_TXON 0x0010 /* Transmitter on (R) */ -#define CSR0_TDMD 0x0008 /* Transmit Demand (RS) */ -#define CSR0_STOP 0x0004 /* Stop (RS) */ -#define CSR0_STRT 0x0002 /* Start (RS) */ -#define CSR0_INIT 0x0001 /* Initialize (RS) */ - -#define CSR0_CLRALL 0x7f00 /* mask for all clearable bits */ - -/* - * Control and Status Register 3 (CSR3) bit definitions - * - */ - -#define CSR3_BSWAP 0x0004 /* Byte Swap (RW) */ -#define CSR3_ACON 0x0002 /* ALE Control (RW) */ -#define CSR3_BCON 0x0001 /* Byte Control (RW) */ - -/* - * Initialization Block Mode operation Bit Definitions. - */ - -#define MODE_PROM 0x8000 /* Promiscuous Mode */ -#define MODE_INTL 0x0040 /* Internal Loopback */ -#define MODE_DRTY 0x0020 /* Disable Retry */ -#define MODE_COLL 0x0010 /* Force Collision */ -#define MODE_DTCR 0x0008 /* Disable Transmit CRC) */ -#define MODE_LOOP 0x0004 /* Loopback */ -#define MODE_DTX 0x0002 /* Disable the Transmitter */ -#define MODE_DRX 0x0001 /* Disable the Receiver */ - -#define MODE_NORMAL 0x0000 /* Normal operation mode */ - -/* - * Receive message descriptor status bit definitions. - */ - -#define RX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define RX_ERR 0x40 /* Error Summary */ -#define RX_FRAM 0x20 /* Framing Error */ -#define RX_OFLO 0x10 /* Overflow Error */ -#define RX_CRC 0x08 /* CRC Error */ -#define RX_BUFF 0x04 /* Buffer Error */ -#define RX_STP 0x02 /* Start of Packet */ -#define RX_ENP 0x01 /* End of Packet */ - - -/* - * Transmit message descriptor status bit definitions. - */ - -#define TX_OWN 0x80 /* Owner bit 0 = host, 1 = lance */ -#define TX_ERR 0x40 /* Error Summary */ -#define TX_MORE 0x10 /* More the 1 retry needed to Xmit */ -#define TX_ONE 0x08 /* One retry needed to Xmit */ -#define TX_DEF 0x04 /* Deferred */ -#define TX_STP 0x02 /* Start of Packet */ -#define TX_ENP 0x01 /* End of Packet */ - -/* - * Transmit status (2) (valid if TX_ERR == 1) - */ - -#define TX_BUFF 0x8000 /* Buffering error (no ENP) */ -#define TX_UFLO 0x4000 /* Underflow (late memory) */ -#define TX_LCOL 0x1000 /* Late collision */ -#define TX_LCAR 0x0400 /* Loss of Carrier */ -#define TX_RTRY 0x0200 /* Failed after 16 retransmissions */ -#define TX_TDR 0x003f /* Time-domain-reflectometer-value */ - - -/* - * Structures used for Communication with the LANCE - */ - -/* LANCE Initialize Block */ - -struct init_block -{ - unsigned short mode; /* Mode Register */ - unsigned char paddr[6]; /* Physical Address (MAC) */ - unsigned char laddr[8]; /* Logical Filter Address (not used) */ - unsigned int rdrp; /* Receive Descriptor Ring pointer */ - unsigned int tdrp; /* Transmit Descriptor Ring pointer */ -}; - - -/* Receive Message Descriptor Entry */ - -struct rmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - volatile short blen; /* Buffer Length (two's complement) */ - unsigned short mlen; /* Message Byte Count */ -}; - - -/* Transmit Message Descriptor Entry */ - -struct tmd -{ - union - { - unsigned long buffer; /* Address of buffer */ - struct - { - unsigned char unused[3]; - unsigned volatile char status; /* Status Bits */ - } s; - } u; - unsigned short blen; /* Buffer Length (two's complement) */ - unsigned volatile short status2; /* Error Status Bits */ -}; - -#endif /* End of SK_G16_H */ diff --git a/drivers/net/skge.c b/drivers/net/skge.c new file mode 100644 index 00000000000..30e8d589d16 --- /dev/null +++ b/drivers/net/skge.c @@ -0,0 +1,3386 @@ +/* + * New driver for Marvell Yukon chipset and SysKonnect Gigabit + * Ethernet adapters. Based on earlier sk98lin, e100 and + * FreeBSD if_sk drivers. + * + * This driver intentionally does not support all the features + * of the original driver such as link fail-over and link management because + * those should be done at higher levels. + * + * Copyright (C) 2004, Stephen Hemminger <shemminger@osdl.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/pci.h> +#include <linux/if_vlan.h> +#include <linux/ip.h> +#include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/dma-mapping.h> +#include <asm/irq.h> + +#include "skge.h" + +#define DRV_NAME "skge" +#define DRV_VERSION "0.6" +#define PFX DRV_NAME " " + +#define DEFAULT_TX_RING_SIZE 128 +#define DEFAULT_RX_RING_SIZE 512 +#define MAX_TX_RING_SIZE 1024 +#define MAX_RX_RING_SIZE 4096 +#define PHY_RETRIES 1000 +#define ETH_JUMBO_MTU 9000 +#define TX_WATCHDOG (5 * HZ) +#define NAPI_WEIGHT 64 +#define BLINK_HZ (HZ/4) +#define LINK_POLL_HZ (HZ/10) + +MODULE_DESCRIPTION("SysKonnect Gigabit Ethernet driver"); +MODULE_AUTHOR("Stephen Hemminger <shemminger@osdl.org>"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); + +static const u32 default_msg + = NETIF_MSG_DRV| NETIF_MSG_PROBE| NETIF_MSG_LINK + | NETIF_MSG_IFUP| NETIF_MSG_IFDOWN; + +static int debug = -1; /* defaults above */ +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); + +static const struct pci_device_id skge_id_table[] = { + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3C940B, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_GE, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, PCI_DEVICE_ID_SYSKONNECT_YU, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_SYSKONNECT, 0x9E00, /* SK-9Exx */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_DLINK, PCI_DEVICE_ID_DLINK_DGE510T, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_MARVELL, 0x4320, /* Gigabit Ethernet Controller */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_MARVELL, 0x5005, /* Marvell (11ab), Belkin */ + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032, + PCI_ANY_ID, PCI_ANY_ID }, + { PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064, + PCI_ANY_ID, PCI_ANY_ID }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, skge_id_table); + +static int skge_up(struct net_device *dev); +static int skge_down(struct net_device *dev); +static void skge_tx_clean(struct skge_port *skge); +static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val); +static void genesis_get_stats(struct skge_port *skge, u64 *data); +static void yukon_get_stats(struct skge_port *skge, u64 *data); +static void yukon_init(struct skge_hw *hw, int port); +static void yukon_reset(struct skge_hw *hw, int port); +static void genesis_mac_init(struct skge_hw *hw, int port); +static void genesis_reset(struct skge_hw *hw, int port); + +static const int txqaddr[] = { Q_XA1, Q_XA2 }; +static const int rxqaddr[] = { Q_R1, Q_R2 }; +static const u32 rxirqmask[] = { IS_R1_F, IS_R2_F }; +static const u32 txirqmask[] = { IS_XA1_F, IS_XA2_F }; + +/* Don't need to look at whole 16K. + * last interesting register is descriptor poll timer. + */ +#define SKGE_REGS_LEN (29*128) + +static int skge_get_regs_len(struct net_device *dev) +{ + return SKGE_REGS_LEN; +} + +/* + * Returns copy of control register region + * I/O region is divided into banks and certain regions are unreadable + */ +static void skge_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + const struct skge_port *skge = netdev_priv(dev); + unsigned long offs; + const void __iomem *io = skge->hw->regs; + static const unsigned long bankmap + = (1<<0) | (1<<2) | (1<<8) | (1<<9) + | (1<<12) | (1<<13) | (1<<14) | (1<<15) | (1<<16) + | (1<<17) | (1<<20) | (1<<21) | (1<<22) | (1<<23) + | (1<<24) | (1<<25) | (1<<26) | (1<<27) | (1<<28); + + regs->version = 1; + for (offs = 0; offs < regs->len; offs += 128) { + u32 len = min_t(u32, 128, regs->len - offs); + + if (bankmap & (1<<(offs/128))) + memcpy_fromio(p + offs, io + offs, len); + else + memset(p + offs, 0, len); + } +} + +/* Wake on Lan only supported on Yukon chps with rev 1 or above */ +static int wol_supported(const struct skge_hw *hw) +{ + return !((hw->chip_id == CHIP_ID_GENESIS || + (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0))); +} + +static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct skge_port *skge = netdev_priv(dev); + + wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0; + wol->wolopts = skge->wol ? WAKE_MAGIC : 0; +} + +static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if(wol->wolopts != WAKE_MAGIC && wol->wolopts != 0) + return -EOPNOTSUPP; + + if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw)) + return -EOPNOTSUPP; + + skge->wol = wol->wolopts == WAKE_MAGIC; + + if (skge->wol) { + memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN); + + skge_write16(hw, WOL_CTRL_STAT, + WOL_CTL_ENA_PME_ON_MAGIC_PKT | + WOL_CTL_ENA_MAGIC_PKT_UNIT); + } else + skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT); + + return 0; +} + + +static int skge_get_settings(struct net_device *dev, + struct ethtool_cmd *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + ecmd->transceiver = XCVR_INTERNAL; + + if (iscopper(hw)) { + if (hw->chip_id == CHIP_ID_GENESIS) + ecmd->supported = SUPPORTED_1000baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_Autoneg | SUPPORTED_TP; + else { + ecmd->supported = SUPPORTED_10baseT_Half + | SUPPORTED_10baseT_Full + | SUPPORTED_100baseT_Half + | SUPPORTED_100baseT_Full + | SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full + | SUPPORTED_Autoneg| SUPPORTED_TP; + + if (hw->chip_id == CHIP_ID_YUKON) + ecmd->supported &= ~SUPPORTED_1000baseT_Half; + + else if (hw->chip_id == CHIP_ID_YUKON_FE) + ecmd->supported &= ~(SUPPORTED_1000baseT_Half + | SUPPORTED_1000baseT_Full); + } + + ecmd->port = PORT_TP; + ecmd->phy_address = hw->phy_addr; + } else { + ecmd->supported = SUPPORTED_1000baseT_Full + | SUPPORTED_FIBRE + | SUPPORTED_Autoneg; + + ecmd->port = PORT_FIBRE; + } + + ecmd->advertising = skge->advertising; + ecmd->autoneg = skge->autoneg; + ecmd->speed = skge->speed; + ecmd->duplex = skge->duplex; + return 0; +} + +static u32 skge_modes(const struct skge_hw *hw) +{ + u32 modes = ADVERTISED_Autoneg + | ADVERTISED_1000baseT_Full | ADVERTISED_1000baseT_Half + | ADVERTISED_100baseT_Full | ADVERTISED_100baseT_Half + | ADVERTISED_10baseT_Full | ADVERTISED_10baseT_Half; + + if (iscopper(hw)) { + modes |= ADVERTISED_TP; + switch(hw->chip_id) { + case CHIP_ID_GENESIS: + modes &= ~(ADVERTISED_100baseT_Full + | ADVERTISED_100baseT_Half + | ADVERTISED_10baseT_Full + | ADVERTISED_10baseT_Half); + break; + + case CHIP_ID_YUKON: + modes &= ~ADVERTISED_1000baseT_Half; + break; + + case CHIP_ID_YUKON_FE: + modes &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full); + break; + } + } else { + modes |= ADVERTISED_FIBRE; + modes &= ~ADVERTISED_1000baseT_Half; + } + return modes; +} + +static int skge_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + const struct skge_hw *hw = skge->hw; + + if (ecmd->autoneg == AUTONEG_ENABLE) { + if (ecmd->advertising & skge_modes(hw)) + return -EINVAL; + } else { + switch(ecmd->speed) { + case SPEED_1000: + if (hw->chip_id == CHIP_ID_YUKON_FE) + return -EINVAL; + break; + case SPEED_100: + case SPEED_10: + if (iscopper(hw) || hw->chip_id == CHIP_ID_GENESIS) + return -EINVAL; + break; + default: + return -EINVAL; + } + } + + skge->autoneg = ecmd->autoneg; + skge->speed = ecmd->speed; + skge->duplex = ecmd->duplex; + skge->advertising = ecmd->advertising; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + return (0); +} + +static void skge_get_drvinfo(struct net_device *dev, + struct ethtool_drvinfo *info) +{ + struct skge_port *skge = netdev_priv(dev); + + strcpy(info->driver, DRV_NAME); + strcpy(info->version, DRV_VERSION); + strcpy(info->fw_version, "N/A"); + strcpy(info->bus_info, pci_name(skge->hw->pdev)); +} + +static const struct skge_stat { + char name[ETH_GSTRING_LEN]; + u16 xmac_offset; + u16 gma_offset; +} skge_stats[] = { + { "tx_bytes", XM_TXO_OK_HI, GM_TXO_OK_HI }, + { "rx_bytes", XM_RXO_OK_HI, GM_RXO_OK_HI }, + + { "tx_broadcast", XM_TXF_BC_OK, GM_TXF_BC_OK }, + { "rx_broadcast", XM_RXF_BC_OK, GM_RXF_BC_OK }, + { "tx_multicast", XM_TXF_MC_OK, GM_TXF_MC_OK }, + { "rx_multicast", XM_RXF_MC_OK, GM_RXF_MC_OK }, + { "tx_unicast", XM_TXF_UC_OK, GM_TXF_UC_OK }, + { "rx_unicast", XM_RXF_UC_OK, GM_RXF_UC_OK }, + { "tx_mac_pause", XM_TXF_MPAUSE, GM_TXF_MPAUSE }, + { "rx_mac_pause", XM_RXF_MPAUSE, GM_RXF_MPAUSE }, + + { "collisions", XM_TXF_SNG_COL, GM_TXF_SNG_COL }, + { "multi_collisions", XM_TXF_MUL_COL, GM_TXF_MUL_COL }, + { "aborted", XM_TXF_ABO_COL, GM_TXF_ABO_COL }, + { "late_collision", XM_TXF_LAT_COL, GM_TXF_LAT_COL }, + { "fifo_underrun", XM_TXE_FIFO_UR, GM_TXE_FIFO_UR }, + { "fifo_overflow", XM_RXE_FIFO_OV, GM_RXE_FIFO_OV }, + + { "rx_toolong", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR }, + { "rx_jabber", XM_RXF_JAB_PKT, GM_RXF_JAB_PKT }, + { "rx_runt", XM_RXE_RUNT, GM_RXE_FRAG }, + { "rx_too_long", XM_RXF_LNG_ERR, GM_RXF_LNG_ERR }, + { "rx_fcs_error", XM_RXF_FCS_ERR, GM_RXF_FCS_ERR }, +}; + +static int skge_get_stats_count(struct net_device *dev) +{ + return ARRAY_SIZE(skge_stats); +} + +static void skge_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, u64 *data) +{ + struct skge_port *skge = netdev_priv(dev); + + if (skge->hw->chip_id == CHIP_ID_GENESIS) + genesis_get_stats(skge, data); + else + yukon_get_stats(skge, data); +} + +/* Use hardware MIB variables for critical path statistics and + * transmit feedback not reported at interrupt. + * Other errors are accounted for in interrupt handler. + */ +static struct net_device_stats *skge_get_stats(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + u64 data[ARRAY_SIZE(skge_stats)]; + + if (skge->hw->chip_id == CHIP_ID_GENESIS) + genesis_get_stats(skge, data); + else + yukon_get_stats(skge, data); + + skge->net_stats.tx_bytes = data[0]; + skge->net_stats.rx_bytes = data[1]; + skge->net_stats.tx_packets = data[2] + data[4] + data[6]; + skge->net_stats.rx_packets = data[3] + data[5] + data[7]; + skge->net_stats.multicast = data[5] + data[7]; + skge->net_stats.collisions = data[10]; + skge->net_stats.tx_aborted_errors = data[12]; + + return &skge->net_stats; +} + +static void skge_get_strings(struct net_device *dev, u32 stringset, u8 *data) +{ + int i; + + switch(stringset) { + case ETH_SS_STATS: + for (i = 0; i < ARRAY_SIZE(skge_stats); i++) + memcpy(data + i * ETH_GSTRING_LEN, + skge_stats[i].name, ETH_GSTRING_LEN); + break; + } +} + +static void skge_get_ring_param(struct net_device *dev, + struct ethtool_ringparam *p) +{ + struct skge_port *skge = netdev_priv(dev); + + p->rx_max_pending = MAX_RX_RING_SIZE; + p->tx_max_pending = MAX_TX_RING_SIZE; + p->rx_mini_max_pending = 0; + p->rx_jumbo_max_pending = 0; + + p->rx_pending = skge->rx_ring.count; + p->tx_pending = skge->tx_ring.count; + p->rx_mini_pending = 0; + p->rx_jumbo_pending = 0; +} + +static int skge_set_ring_param(struct net_device *dev, + struct ethtool_ringparam *p) +{ + struct skge_port *skge = netdev_priv(dev); + + if (p->rx_pending == 0 || p->rx_pending > MAX_RX_RING_SIZE || + p->tx_pending == 0 || p->tx_pending > MAX_TX_RING_SIZE) + return -EINVAL; + + skge->rx_ring.count = p->rx_pending; + skge->tx_ring.count = p->tx_pending; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + + return 0; +} + +static u32 skge_get_msglevel(struct net_device *netdev) +{ + struct skge_port *skge = netdev_priv(netdev); + return skge->msg_enable; +} + +static void skge_set_msglevel(struct net_device *netdev, u32 value) +{ + struct skge_port *skge = netdev_priv(netdev); + skge->msg_enable = value; +} + +static int skge_nway_reset(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (skge->autoneg != AUTONEG_ENABLE || !netif_running(dev)) + return -EINVAL; + + spin_lock_bh(&hw->phy_lock); + if (hw->chip_id == CHIP_ID_GENESIS) { + genesis_reset(hw, port); + genesis_mac_init(hw, port); + } else { + yukon_reset(hw, port); + yukon_init(hw, port); + } + spin_unlock_bh(&hw->phy_lock); + return 0; +} + +static int skge_set_sg(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if (hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + return ethtool_op_set_sg(dev, data); +} + +static int skge_set_tx_csum(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + + if (hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + + return ethtool_op_set_tx_csum(dev, data); +} + +static u32 skge_get_rx_csum(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + return skge->rx_csum; +} + +/* Only Yukon supports checksum offload. */ +static int skge_set_rx_csum(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + + if (skge->hw->chip_id == CHIP_ID_GENESIS && data) + return -EOPNOTSUPP; + + skge->rx_csum = data; + return 0; +} + +/* Only Yukon II supports TSO (not implemented yet) */ +static int skge_set_tso(struct net_device *dev, u32 data) +{ + if (data) + return -EOPNOTSUPP; + return 0; +} + +static void skge_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + + ecmd->tx_pause = (skge->flow_control == FLOW_MODE_LOC_SEND) + || (skge->flow_control == FLOW_MODE_SYMMETRIC); + ecmd->rx_pause = (skge->flow_control == FLOW_MODE_REM_SEND) + || (skge->flow_control == FLOW_MODE_SYMMETRIC); + + ecmd->autoneg = skge->autoneg; +} + +static int skge_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + + skge->autoneg = ecmd->autoneg; + if (ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_SYMMETRIC; + else if(ecmd->rx_pause && !ecmd->tx_pause) + skge->flow_control = FLOW_MODE_REM_SEND; + else if(!ecmd->rx_pause && ecmd->tx_pause) + skge->flow_control = FLOW_MODE_LOC_SEND; + else + skge->flow_control = FLOW_MODE_NONE; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + return 0; +} + +/* Chip internal frequency for clock calculations */ +static inline u32 hwkhz(const struct skge_hw *hw) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + return 53215; /* or: 53.125 MHz */ + else if (hw->chip_id == CHIP_ID_YUKON_EC) + return 125000; /* or: 125.000 MHz */ + else + return 78215; /* or: 78.125 MHz */ +} + +/* Chip hz to microseconds */ +static inline u32 skge_clk2usec(const struct skge_hw *hw, u32 ticks) +{ + return (ticks * 1000) / hwkhz(hw); +} + +/* Microseconds to chip hz */ +static inline u32 skge_usecs2clk(const struct skge_hw *hw, u32 usec) +{ + return hwkhz(hw) * usec / 1000; +} + +static int skge_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + ecmd->rx_coalesce_usecs = 0; + ecmd->tx_coalesce_usecs = 0; + + if (skge_read32(hw, B2_IRQM_CTRL) & TIM_START) { + u32 delay = skge_clk2usec(hw, skge_read32(hw, B2_IRQM_INI)); + u32 msk = skge_read32(hw, B2_IRQM_MSK); + + if (msk & rxirqmask[port]) + ecmd->rx_coalesce_usecs = delay; + if (msk & txirqmask[port]) + ecmd->tx_coalesce_usecs = delay; + } + + return 0; +} + +/* Note: interrupt timer is per board, but can turn on/off per port */ +static int skge_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *ecmd) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + u32 msk = skge_read32(hw, B2_IRQM_MSK); + u32 delay = 25; + + if (ecmd->rx_coalesce_usecs == 0) + msk &= ~rxirqmask[port]; + else if (ecmd->rx_coalesce_usecs < 25 || + ecmd->rx_coalesce_usecs > 33333) + return -EINVAL; + else { + msk |= rxirqmask[port]; + delay = ecmd->rx_coalesce_usecs; + } + + if (ecmd->tx_coalesce_usecs == 0) + msk &= ~txirqmask[port]; + else if (ecmd->tx_coalesce_usecs < 25 || + ecmd->tx_coalesce_usecs > 33333) + return -EINVAL; + else { + msk |= txirqmask[port]; + delay = min(delay, ecmd->rx_coalesce_usecs); + } + + skge_write32(hw, B2_IRQM_MSK, msk); + if (msk == 0) + skge_write32(hw, B2_IRQM_CTRL, TIM_STOP); + else { + skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, delay)); + skge_write32(hw, B2_IRQM_CTRL, TIM_START); + } + return 0; +} + +static void skge_led_on(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, B0_LED, LED_STAT_ON); + + skge_write8(hw, SKGEMAC_REG(port, RX_LED_TST), LED_T_ON); + skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 100); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + + switch (hw->phy_type) { + case SK_PHY_BCOM: + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, + PHY_B_PEC_LED_ON); + break; + case SK_PHY_LONE: + skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, + 0x0800); + break; + default: + skge_write8(hw, SKGEMAC_REG(port, TX_LED_TST), LED_T_ON); + skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 100); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + } + } else { + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_DUP(MO_LED_ON) | + PHY_M_LED_MO_10(MO_LED_ON) | + PHY_M_LED_MO_100(MO_LED_ON) | + PHY_M_LED_MO_1000(MO_LED_ON) | + PHY_M_LED_MO_RX(MO_LED_ON)); + } +} + +static void skge_led_off(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_OFF); + skge_write8(hw, B0_LED, LED_STAT_OFF); + + skge_write32(hw, SKGEMAC_REG(port, RX_LED_VAL), 0); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_T_OFF); + + switch (hw->phy_type) { + case SK_PHY_BCOM: + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, + PHY_B_PEC_LED_OFF); + break; + case SK_PHY_LONE: + skge_xm_phy_write(hw, port, PHY_LONE_LED_CFG, + PHY_L_LC_LEDT); + break; + default: + skge_write32(hw, SKGEMAC_REG(port, TX_LED_VAL), 0); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_T_OFF); + } + } else { + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, 0); + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, + PHY_M_LED_MO_DUP(MO_LED_OFF) | + PHY_M_LED_MO_10(MO_LED_OFF) | + PHY_M_LED_MO_100(MO_LED_OFF) | + PHY_M_LED_MO_1000(MO_LED_OFF) | + PHY_M_LED_MO_RX(MO_LED_OFF)); + } +} + +static void skge_blink_timer(unsigned long data) +{ + struct skge_port *skge = (struct skge_port *) data; + struct skge_hw *hw = skge->hw; + unsigned long flags; + + spin_lock_irqsave(&hw->phy_lock, flags); + if (skge->blink_on) + skge_led_on(hw, skge->port); + else + skge_led_off(hw, skge->port); + spin_unlock_irqrestore(&hw->phy_lock, flags); + + skge->blink_on = !skge->blink_on; + mod_timer(&skge->led_blink, jiffies + BLINK_HZ); +} + +/* blink LED's for finding board */ +static int skge_phys_id(struct net_device *dev, u32 data) +{ + struct skge_port *skge = netdev_priv(dev); + + if(!data || data > (u32)(MAX_SCHEDULE_TIMEOUT / HZ)) + data = (u32)(MAX_SCHEDULE_TIMEOUT / HZ); + + /* start blinking */ + skge->blink_on = 1; + mod_timer(&skge->led_blink, jiffies+1); + + msleep_interruptible(data * 1000); + del_timer_sync(&skge->led_blink); + + skge_led_off(skge->hw, skge->port); + + return 0; +} + +static struct ethtool_ops skge_ethtool_ops = { + .get_settings = skge_get_settings, + .set_settings = skge_set_settings, + .get_drvinfo = skge_get_drvinfo, + .get_regs_len = skge_get_regs_len, + .get_regs = skge_get_regs, + .get_wol = skge_get_wol, + .set_wol = skge_set_wol, + .get_msglevel = skge_get_msglevel, + .set_msglevel = skge_set_msglevel, + .nway_reset = skge_nway_reset, + .get_link = ethtool_op_get_link, + .get_ringparam = skge_get_ring_param, + .set_ringparam = skge_set_ring_param, + .get_pauseparam = skge_get_pauseparam, + .set_pauseparam = skge_set_pauseparam, + .get_coalesce = skge_get_coalesce, + .set_coalesce = skge_set_coalesce, + .get_tso = ethtool_op_get_tso, + .set_tso = skge_set_tso, + .get_sg = ethtool_op_get_sg, + .set_sg = skge_set_sg, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = skge_set_tx_csum, + .get_rx_csum = skge_get_rx_csum, + .set_rx_csum = skge_set_rx_csum, + .get_strings = skge_get_strings, + .phys_id = skge_phys_id, + .get_stats_count = skge_get_stats_count, + .get_ethtool_stats = skge_get_ethtool_stats, +}; + +/* + * Allocate ring elements and chain them together + * One-to-one association of board descriptors with ring elements + */ +static int skge_ring_alloc(struct skge_ring *ring, void *vaddr, u64 base) +{ + struct skge_tx_desc *d; + struct skge_element *e; + int i; + + ring->start = kmalloc(sizeof(*e)*ring->count, GFP_KERNEL); + if (!ring->start) + return -ENOMEM; + + for (i = 0, e = ring->start, d = vaddr; i < ring->count; i++, e++, d++) { + e->desc = d; + if (i == ring->count - 1) { + e->next = ring->start; + d->next_offset = base; + } else { + e->next = e + 1; + d->next_offset = base + (i+1) * sizeof(*d); + } + } + ring->to_use = ring->to_clean = ring->start; + + return 0; +} + +/* Setup buffer for receiving */ +static inline int skge_rx_alloc(struct skge_port *skge, + struct skge_element *e) +{ + unsigned long bufsize = skge->netdev->mtu + ETH_HLEN; /* VLAN? */ + struct skge_rx_desc *rd = e->desc; + struct sk_buff *skb; + u64 map; + + skb = dev_alloc_skb(bufsize + NET_IP_ALIGN); + if (unlikely(!skb)) { + printk(KERN_DEBUG PFX "%s: out of memory for receive\n", + skge->netdev->name); + return -ENOMEM; + } + + skb->dev = skge->netdev; + skb_reserve(skb, NET_IP_ALIGN); + + map = pci_map_single(skge->hw->pdev, skb->data, bufsize, + PCI_DMA_FROMDEVICE); + + rd->dma_lo = map; + rd->dma_hi = map >> 32; + e->skb = skb; + rd->csum1_start = ETH_HLEN; + rd->csum2_start = ETH_HLEN; + rd->csum1 = 0; + rd->csum2 = 0; + + wmb(); + + rd->control = BMU_OWN | BMU_STF | BMU_IRQ_EOF | BMU_TCP_CHECK | bufsize; + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, bufsize); + return 0; +} + +/* Free all unused buffers in receive ring, assumes receiver stopped */ +static void skge_rx_clean(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + + for (e = ring->to_clean; e != ring->to_use; e = e->next) { + struct skge_rx_desc *rd = e->desc; + rd->control = 0; + + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + dev_kfree_skb(e->skb); + e->skb = NULL; + } + ring->to_clean = e; +} + +/* Allocate buffers for receive ring + * For receive: to_use is refill location + * to_clean is next received frame. + * + * if (to_use == to_clean) + * then ring all frames in ring need buffers + * if (to_use->next == to_clean) + * then ring all frames in ring have buffers + */ +static int skge_rx_fill(struct skge_port *skge) +{ + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + int ret = 0; + + for (e = ring->to_use; e->next != ring->to_clean; e = e->next) { + if (skge_rx_alloc(skge, e)) { + ret = 1; + break; + } + + } + ring->to_use = e; + + return ret; +} + +static void skge_link_up(struct skge_port *skge) +{ + netif_carrier_on(skge->netdev); + if (skge->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(skge->netdev); + + if (netif_msg_link(skge)) + printk(KERN_INFO PFX + "%s: Link is up at %d Mbps, %s duplex, flow control %s\n", + skge->netdev->name, skge->speed, + skge->duplex == DUPLEX_FULL ? "full" : "half", + (skge->flow_control == FLOW_MODE_NONE) ? "none" : + (skge->flow_control == FLOW_MODE_LOC_SEND) ? "tx only" : + (skge->flow_control == FLOW_MODE_REM_SEND) ? "rx only" : + (skge->flow_control == FLOW_MODE_SYMMETRIC) ? "tx and rx" : + "unknown"); +} + +static void skge_link_down(struct skge_port *skge) +{ + netif_carrier_off(skge->netdev); + netif_stop_queue(skge->netdev); + + if (netif_msg_link(skge)) + printk(KERN_INFO PFX "%s: Link is down.\n", skge->netdev->name); +} + +static u16 skge_xm_phy_read(struct skge_hw *hw, int port, u16 reg) +{ + int i; + u16 v; + + skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + v = skge_xm_read16(hw, port, XM_PHY_DATA); + if (hw->phy_type != SK_PHY_XMAC) { + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (skge_xm_read16(hw, port, XM_MMU_CMD) + & XM_MMU_PHY_RDY) + goto ready; + } + + printk(KERN_WARNING PFX "%s: phy read timed out\n", + hw->dev[port]->name); + return 0; + ready: + v = skge_xm_read16(hw, port, XM_PHY_DATA); + } + + return v; +} + +static void skge_xm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +{ + int i; + + skge_xm_write16(hw, port, XM_PHY_ADDR, reg | hw->phy_addr); + for (i = 0; i < PHY_RETRIES; i++) { + if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + goto ready; + cpu_relax(); + } + printk(KERN_WARNING PFX "%s: phy write failed to come ready\n", + hw->dev[port]->name); + + + ready: + skge_xm_write16(hw, port, XM_PHY_DATA, val); + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (!(skge_xm_read16(hw, port, XM_MMU_CMD) & XM_MMU_PHY_BUSY)) + return; + } + printk(KERN_WARNING PFX "%s: phy write timed out\n", + hw->dev[port]->name); +} + +static void genesis_init(struct skge_hw *hw) +{ + /* set blink source counter */ + skge_write32(hw, B2_BSC_INI, (SK_BLK_DUR * SK_FACT_53) / 100); + skge_write8(hw, B2_BSC_CTRL, BSC_START); + + /* configure mac arbiter */ + skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure mac arbiter timeout values */ + skge_write8(hw, B3_MA_TOINI_RX1, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_RX2, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_TX1, SK_MAC_TO_53); + skge_write8(hw, B3_MA_TOINI_TX2, SK_MAC_TO_53); + + skge_write8(hw, B3_MA_RCINI_RX1, 0); + skge_write8(hw, B3_MA_RCINI_RX2, 0); + skge_write8(hw, B3_MA_RCINI_TX1, 0); + skge_write8(hw, B3_MA_RCINI_TX2, 0); + + /* configure packet arbiter timeout */ + skge_write16(hw, B3_PA_CTRL, PA_RST_CLR); + skge_write16(hw, B3_PA_TOINI_RX1, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_TX1, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_RX2, SK_PKT_TO_MAX); + skge_write16(hw, B3_PA_TOINI_TX2, SK_PKT_TO_MAX); +} + +static void genesis_reset(struct skge_hw *hw, int port) +{ + int i; + u64 zero = 0; + + /* reset the statistics module */ + skge_xm_write32(hw, port, XM_GP_PORT, XM_GP_RES_STAT); + skge_xm_write16(hw, port, XM_IMSK, 0xffff); /* disable XMAC IRQs */ + skge_xm_write32(hw, port, XM_MODE, 0); /* clear Mode Reg */ + skge_xm_write16(hw, port, XM_TX_CMD, 0); /* reset TX CMD Reg */ + skge_xm_write16(hw, port, XM_RX_CMD, 0); /* reset RX CMD Reg */ + + /* disable all PHY IRQs */ + if (hw->phy_type == SK_PHY_BCOM) + skge_xm_write16(hw, port, PHY_BCOM_INT_MASK, 0xffff); + + skge_xm_outhash(hw, port, XM_HSM, (u8 *) &zero); + for (i = 0; i < 15; i++) + skge_xm_outaddr(hw, port, XM_EXM(i), (u8 *) &zero); + skge_xm_outhash(hw, port, XM_SRC_CHK, (u8 *) &zero); +} + + +static void genesis_mac_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + int i; + u32 r; + u16 id1; + u16 ctrl1, ctrl2, ctrl3, ctrl4, ctrl5; + + /* magic workaround patterns for Broadcom */ + static const struct { + u16 reg; + u16 val; + } A1hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1104 }, + { 0x17, 0x0013 }, { 0x15, 0x0404 }, { 0x17, 0x8006 }, + { 0x15, 0x0132 }, { 0x17, 0x8006 }, { 0x15, 0x0232 }, + { 0x17, 0x800D }, { 0x15, 0x000F }, { 0x18, 0x0420 }, + }, C0hack[] = { + { 0x18, 0x0c20 }, { 0x17, 0x0012 }, { 0x15, 0x1204 }, + { 0x17, 0x0013 }, { 0x15, 0x0A04 }, { 0x18, 0x0420 }, + }; + + + /* initialize Rx, Tx and Link LED */ + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_ON); + skge_write8(hw, SKGEMAC_REG(port, LNK_LED_REG), LINKLED_LINKSYNC_ON); + + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_START); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_START); + + /* Unreset the XMAC. */ + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_CLR_MAC_RST); + + /* + * Perform additional initialization for external PHYs, + * namely for the 1000baseTX cards that use the XMAC's + * GMII mode. + */ + spin_lock_bh(&hw->phy_lock); + if (hw->phy_type != SK_PHY_XMAC) { + /* Take PHY out of reset. */ + r = skge_read32(hw, B2_GP_IO); + if (port == 0) + r |= GP_DIR_0|GP_IO_0; + else + r |= GP_DIR_2|GP_IO_2; + + skge_write32(hw, B2_GP_IO, r); + skge_read32(hw, B2_GP_IO); + + /* Enable GMII mode on the XMAC. */ + skge_xm_write16(hw, port, XM_HW_CFG, XM_HW_GMII_MD); + + id1 = skge_xm_phy_read(hw, port, PHY_XMAC_ID1); + + /* Optimize MDIO transfer by suppressing preamble. */ + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + | XM_MMU_NO_PRE); + + if (id1 == PHY_BCOM_ID1_C0) { + /* + * Workaround BCOM Errata for the C0 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(C0hack); i++) + skge_xm_phy_write(hw, port, + C0hack[i].reg, C0hack[i].val); + + } else if (id1 == PHY_BCOM_ID1_A1) { + /* + * Workaround BCOM Errata for the A1 type. + * Write magic patterns to reserved registers. + */ + for (i = 0; i < ARRAY_SIZE(A1hack); i++) + skge_xm_phy_write(hw, port, + A1hack[i].reg, A1hack[i].val); + } + + /* + * Workaround BCOM Errata (#10523) for all BCom PHYs. + * Disable Power Management after reset. + */ + r = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL); + skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, r | PHY_B_AC_DIS_PM); + } + + /* Dummy read */ + skge_xm_read16(hw, port, XM_ISRC); + + r = skge_xm_read32(hw, port, XM_MODE); + skge_xm_write32(hw, port, XM_MODE, r|XM_MD_CSA); + + /* We don't need the FCS appended to the packet. */ + r = skge_xm_read16(hw, port, XM_RX_CMD); + skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_STRIP_FCS); + + /* We want short frames padded to 60 bytes. */ + r = skge_xm_read16(hw, port, XM_TX_CMD); + skge_xm_write16(hw, port, XM_TX_CMD, r | XM_TX_AUTO_PAD); + + /* + * Enable the reception of all error frames. This is is + * a necessary evil due to the design of the XMAC. The + * XMAC's receive FIFO is only 8K in size, however jumbo + * frames can be up to 9000 bytes in length. When bad + * frame filtering is enabled, the XMAC's RX FIFO operates + * in 'store and forward' mode. For this to work, the + * entire frame has to fit into the FIFO, but that means + * that jumbo frames larger than 8192 bytes will be + * truncated. Disabling all bad frame filtering causes + * the RX FIFO to operate in streaming mode, in which + * case the XMAC will start transfering frames out of the + * RX FIFO as soon as the FIFO threshold is reached. + */ + r = skge_xm_read32(hw, port, XM_MODE); + skge_xm_write32(hw, port, XM_MODE, + XM_MD_RX_CRCE|XM_MD_RX_LONG|XM_MD_RX_RUNT| + XM_MD_RX_ERR|XM_MD_RX_IRLE); + + skge_xm_outaddr(hw, port, XM_SA, hw->dev[port]->dev_addr); + skge_xm_outaddr(hw, port, XM_EXM(0), hw->dev[port]->dev_addr); + + /* + * Bump up the transmit threshold. This helps hold off transmit + * underruns when we're blasting traffic from both ports at once. + */ + skge_xm_write16(hw, port, XM_TX_THR, 512); + + /* Configure MAC arbiter */ + skge_write16(hw, B3_MA_TO_CTRL, MA_RST_CLR); + + /* configure timeout values */ + skge_write8(hw, B3_MA_TOINI_RX1, 72); + skge_write8(hw, B3_MA_TOINI_RX2, 72); + skge_write8(hw, B3_MA_TOINI_TX1, 72); + skge_write8(hw, B3_MA_TOINI_TX2, 72); + + skge_write8(hw, B3_MA_RCINI_RX1, 0); + skge_write8(hw, B3_MA_RCINI_RX2, 0); + skge_write8(hw, B3_MA_RCINI_TX1, 0); + skge_write8(hw, B3_MA_RCINI_TX2, 0); + + /* Configure Rx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_TIM_PAT); + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_ENA_OP_MD); + + /* Configure Tx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_TX_CTRL_DEF); + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_ENA_OP_MD); + + if (hw->dev[port]->mtu > ETH_DATA_LEN) { + /* Enable frame flushing if jumbo frames used */ + skge_write16(hw, SKGEMAC_REG(port,RX_MFF_CTRL1), MFF_ENA_FLUSH); + } else { + /* enable timeout timers if normal frames */ + skge_write16(hw, B3_PA_CTRL, + port == 0 ? PA_ENA_TO_TX1 : PA_ENA_TO_TX2); + } + + + r = skge_xm_read16(hw, port, XM_RX_CMD); + if (hw->dev[port]->mtu > ETH_DATA_LEN) + skge_xm_write16(hw, port, XM_RX_CMD, r | XM_RX_BIG_PK_OK); + else + skge_xm_write16(hw, port, XM_RX_CMD, r & ~(XM_RX_BIG_PK_OK)); + + switch (hw->phy_type) { + case SK_PHY_XMAC: + if (skge->autoneg == AUTONEG_ENABLE) { + ctrl1 = PHY_X_AN_FD | PHY_X_AN_HD; + + switch (skge->flow_control) { + case FLOW_MODE_NONE: + ctrl1 |= PHY_X_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl1 |= PHY_X_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl1 |= PHY_X_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + ctrl1 |= PHY_X_P_BOTH_MD; + break; + } + + skge_xm_phy_write(hw, port, PHY_XMAC_AUNE_ADV, ctrl1); + ctrl2 = PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + ctrl2 = 0; + if (skge->duplex == DUPLEX_FULL) + ctrl2 |= PHY_CT_DUP_MD; + } + + skge_xm_phy_write(hw, port, PHY_XMAC_CTRL, ctrl2); + break; + + case SK_PHY_BCOM: + ctrl1 = PHY_CT_SP1000; + ctrl2 = 0; + ctrl3 = PHY_SEL_TYPE; + ctrl4 = PHY_B_PEC_EN_LTR; + ctrl5 = PHY_B_AC_TX_TST; + + if (skge->autoneg == AUTONEG_ENABLE) { + /* + * Workaround BCOM Errata #1 for the C5 type. + * 1000Base-T Link Acquisition Failure in Slave Mode + * Set Repeater/DTE bit 10 of the 1000Base-T Control Register + */ + ctrl2 |= PHY_B_1000C_RD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + ctrl2 |= PHY_B_1000C_AHD; + if (skge->advertising & ADVERTISED_1000baseT_Full) + ctrl2 |= PHY_B_1000C_AFD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + ctrl3 |= PHY_B_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + ctrl3 |= PHY_B_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + ctrl3 |= PHY_B_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + ctrl3 |= PHY_B_P_BOTH_MD; + break; + } + + /* Restart Auto-negotiation */ + ctrl1 |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + if (skge->duplex == DUPLEX_FULL) + ctrl1 |= PHY_CT_DUP_MD; + + ctrl2 |= PHY_B_1000C_MSE; /* set it to Slave */ + } + + skge_xm_phy_write(hw, port, PHY_BCOM_1000T_CTRL, ctrl2); + skge_xm_phy_write(hw, port, PHY_BCOM_AUNE_ADV, ctrl3); + + if (skge->netdev->mtu > ETH_DATA_LEN) { + ctrl4 |= PHY_B_PEC_HIGH_LA; + ctrl5 |= PHY_B_AC_LONG_PACK; + + skge_xm_phy_write(hw, port,PHY_BCOM_AUX_CTRL, ctrl5); + } + + skge_xm_phy_write(hw, port, PHY_BCOM_P_EXT_CTRL, ctrl4); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, ctrl1); + break; + } + spin_unlock_bh(&hw->phy_lock); + + /* Clear MIB counters */ + skge_xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + /* Clear two times according to Errata #3 */ + skge_xm_write16(hw, port, XM_STAT_CMD, + XM_SC_CLR_RXC | XM_SC_CLR_TXC); + + /* Start polling for link status */ + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); +} + +static void genesis_stop(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + /* Clear Tx packet arbiter timeout IRQ */ + skge_write16(hw, B3_PA_CTRL, + port == 0 ? PA_CLR_TO_TX1 : PA_CLR_TO_TX2); + + /* + * If the transfer stucks at the MAC the STOP command will not + * terminate if we don't flush the XMAC's transmit FIFO ! + */ + skge_xm_write32(hw, port, XM_MODE, + skge_xm_read32(hw, port, XM_MODE)|XM_MD_FTF); + + + /* Reset the MAC */ + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), MFF_SET_MAC_RST); + + /* For external PHYs there must be special handling */ + if (hw->phy_type != SK_PHY_XMAC) { + u32 reg = skge_read32(hw, B2_GP_IO); + + if (port == 0) { + reg |= GP_DIR_0; + reg &= ~GP_IO_0; + } else { + reg |= GP_DIR_2; + reg &= ~GP_IO_2; + } + skge_write32(hw, B2_GP_IO, reg); + skge_read32(hw, B2_GP_IO); + } + + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + skge_xm_read16(hw, port, XM_MMU_CMD); +} + + +static void genesis_get_stats(struct skge_port *skge, u64 *data) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i; + unsigned long timeout = jiffies + HZ; + + skge_xm_write16(hw, port, + XM_STAT_CMD, XM_SC_SNP_TXC | XM_SC_SNP_RXC); + + /* wait for update to complete */ + while (skge_xm_read16(hw, port, XM_STAT_CMD) + & (XM_SC_SNP_TXC | XM_SC_SNP_RXC)) { + if (time_after(jiffies, timeout)) + break; + udelay(10); + } + + /* special case for 64 bit octet counter */ + data[0] = (u64) skge_xm_read32(hw, port, XM_TXO_OK_HI) << 32 + | skge_xm_read32(hw, port, XM_TXO_OK_LO); + data[1] = (u64) skge_xm_read32(hw, port, XM_RXO_OK_HI) << 32 + | skge_xm_read32(hw, port, XM_RXO_OK_LO); + + for (i = 2; i < ARRAY_SIZE(skge_stats); i++) + data[i] = skge_xm_read32(hw, port, skge_stats[i].xmac_offset); +} + +static void genesis_mac_intr(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u16 status = skge_xm_read16(hw, port, XM_ISRC); + + pr_debug("genesis_intr status %x\n", status); + if (hw->phy_type == SK_PHY_XMAC) { + /* LInk down, start polling for state change */ + if (status & XM_IS_INP_ASS) { + skge_xm_write16(hw, port, XM_IMSK, + skge_xm_read16(hw, port, XM_IMSK) | XM_IS_INP_ASS); + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } + else if (status & XM_IS_AND) + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } + + if (status & XM_IS_TXF_UR) { + skge_xm_write32(hw, port, XM_MODE, XM_MD_FTF); + ++skge->net_stats.tx_fifo_errors; + } + if (status & XM_IS_RXF_OV) { + skge_xm_write32(hw, port, XM_MODE, XM_MD_FRF); + ++skge->net_stats.rx_fifo_errors; + } +} + +static void skge_gm_phy_write(struct skge_hw *hw, int port, u16 reg, u16 val) +{ + int i; + + skge_gma_write16(hw, port, GM_SMI_DATA, val); + skge_gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(hw->phy_addr) | GM_SMI_CT_REG_AD(reg)); + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + + if (!(skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY)) + break; + } +} + +static u16 skge_gm_phy_read(struct skge_hw *hw, int port, u16 reg) +{ + int i; + + skge_gma_write16(hw, port, GM_SMI_CTRL, + GM_SMI_CT_PHY_AD(hw->phy_addr) + | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD); + + for (i = 0; i < PHY_RETRIES; i++) { + udelay(1); + if (skge_gma_read16(hw, port, GM_SMI_CTRL) & GM_SMI_CT_RD_VAL) + goto ready; + } + + printk(KERN_WARNING PFX "%s: phy read timeout\n", + hw->dev[port]->name); + return 0; + ready: + return skge_gma_read16(hw, port, GM_SMI_DATA); +} + +static void genesis_link_down(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + pr_debug("genesis_link_down\n"); + + skge_xm_write16(hw, port, XM_MMU_CMD, + skge_xm_read16(hw, port, XM_MMU_CMD) + & ~(XM_MMU_ENA_RX | XM_MMU_ENA_TX)); + + /* dummy read to ensure writing */ + (void) skge_xm_read16(hw, port, XM_MMU_CMD); + + skge_link_down(skge); +} + +static void genesis_link_up(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 cmd; + u32 mode, msk; + + pr_debug("genesis_link_up\n"); + cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + + /* + * enabling pause frame reception is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + if (skge->flow_control == FLOW_MODE_NONE || + skge->flow_control == FLOW_MODE_LOC_SEND) + cmd |= XM_MMU_IGN_PF; + else + /* Enable Pause Frame Reception */ + cmd &= ~XM_MMU_IGN_PF; + + skge_xm_write16(hw, port, XM_MMU_CMD, cmd); + + mode = skge_xm_read32(hw, port, XM_MODE); + if (skge->flow_control == FLOW_MODE_SYMMETRIC || + skge->flow_control == FLOW_MODE_LOC_SEND) { + /* + * Configure Pause Frame Generation + * Use internal and external Pause Frame Generation. + * Sending pause frames is edge triggered. + * Send a Pause frame with the maximum pause time if + * internal oder external FIFO full condition occurs. + * Send a zero pause time frame to re-start transmission. + */ + /* XM_PAUSE_DA = '010000C28001' (default) */ + /* XM_MAC_PTIME = 0xffff (maximum) */ + /* remember this value is defined in big endian (!) */ + skge_xm_write16(hw, port, XM_MAC_PTIME, 0xffff); + + mode |= XM_PAUSE_MODE; + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_ENA_PAUSE); + } else { + /* + * disable pause frame generation is required for 1000BT + * because the XMAC is not reset if the link is going down + */ + /* Disable Pause Mode in Mode Register */ + mode &= ~XM_PAUSE_MODE; + + skge_write16(hw, SKGEMAC_REG(port, RX_MFF_CTRL1), MFF_DIS_PAUSE); + } + + skge_xm_write32(hw, port, XM_MODE, mode); + + msk = XM_DEF_MSK; + if (hw->phy_type != SK_PHY_XMAC) + msk |= XM_IS_INP_ASS; /* disable GP0 interrupt bit */ + + skge_xm_write16(hw, port, XM_IMSK, msk); + skge_xm_read16(hw, port, XM_ISRC); + + /* get MMU Command Reg. */ + cmd = skge_xm_read16(hw, port, XM_MMU_CMD); + if (hw->phy_type != SK_PHY_XMAC && skge->duplex == DUPLEX_FULL) + cmd |= XM_MMU_GMII_FD; + + if (hw->phy_type == SK_PHY_BCOM) { + /* + * Workaround BCOM Errata (#10523) for all BCom Phys + * Enable Power Management after link up + */ + skge_xm_phy_write(hw, port, PHY_BCOM_AUX_CTRL, + skge_xm_phy_read(hw, port, PHY_BCOM_AUX_CTRL) + & ~PHY_B_AC_DIS_PM); + skge_xm_phy_write(hw, port, PHY_BCOM_INT_MASK, + PHY_B_DEF_MSK); + } + + /* enable Rx/Tx */ + skge_xm_write16(hw, port, XM_MMU_CMD, + cmd | XM_MMU_ENA_RX | XM_MMU_ENA_TX); + skge_link_up(skge); +} + + +static void genesis_bcom_intr(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 stat = skge_xm_phy_read(hw, port, PHY_BCOM_INT_STAT); + + pr_debug("genesis_bcom intr stat=%x\n", stat); + + /* Workaround BCom Errata: + * enable and disable loopback mode if "NO HCD" occurs. + */ + if (stat & PHY_B_IS_NO_HDCL) { + u16 ctrl = skge_xm_phy_read(hw, port, PHY_BCOM_CTRL); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + ctrl | PHY_CT_LOOP); + skge_xm_phy_write(hw, port, PHY_BCOM_CTRL, + ctrl & ~PHY_CT_LOOP); + } + + stat = skge_xm_phy_read(hw, port, PHY_BCOM_STAT); + if (stat & (PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) { + u16 aux = skge_xm_phy_read(hw, port, PHY_BCOM_AUX_STAT); + if ( !(aux & PHY_B_AS_LS) && netif_carrier_ok(skge->netdev)) + genesis_link_down(skge); + + else if (stat & PHY_B_IS_LST_CHANGE) { + if (aux & PHY_B_AS_AN_C) { + switch (aux & PHY_B_AS_AN_RES_MSK) { + case PHY_B_RES_1000FD: + skge->duplex = DUPLEX_FULL; + break; + case PHY_B_RES_1000HD: + skge->duplex = DUPLEX_HALF; + break; + } + + switch (aux & PHY_B_AS_PAUSE_MSK) { + case PHY_B_AS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_B_AS_PRR: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_B_AS_PRT: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + skge->speed = SPEED_1000; + } + genesis_link_up(skge); + } + else + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + } +} + +/* Perodic poll of phy status to check for link transistion */ +static void skge_link_timer(unsigned long __arg) +{ + struct skge_port *skge = (struct skge_port *) __arg; + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (hw->chip_id != CHIP_ID_GENESIS || !netif_running(skge->netdev)) + return; + + spin_lock_bh(&hw->phy_lock); + if (hw->phy_type == SK_PHY_BCOM) + genesis_bcom_intr(skge); + else { + int i; + for (i = 0; i < 3; i++) + if (skge_xm_read16(hw, port, XM_ISRC) & XM_IS_INP_ASS) + break; + + if (i == 3) + mod_timer(&skge->link_check, jiffies + LINK_POLL_HZ); + else + genesis_link_up(skge); + } + spin_unlock_bh(&hw->phy_lock); +} + +/* Marvell Phy Initailization */ +static void yukon_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u16 ctrl, ct1000, adv; + u16 ledctrl, ledover; + + pr_debug("yukon_init\n"); + if (skge->autoneg == AUTONEG_ENABLE) { + u16 ectrl = skge_gm_phy_read(hw, port, PHY_MARV_EXT_CTRL); + + ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK | + PHY_M_EC_MAC_S_MSK); + ectrl |= PHY_M_EC_MAC_S(MAC_TX_CLK_25_MHZ); + + /* on PHY 88E1111 there is a change for downshift control */ + if (hw->chip_id == CHIP_ID_YUKON_EC) + ectrl |= PHY_M_EC_M_DSC_2(0) | PHY_M_EC_DOWN_S_ENA; + else + ectrl |= PHY_M_EC_M_DSC(0) | PHY_M_EC_S_DSC(1); + + skge_gm_phy_write(hw, port, PHY_MARV_EXT_CTRL, ectrl); + } + + ctrl = skge_gm_phy_read(hw, port, PHY_MARV_CTRL); + if (skge->autoneg == AUTONEG_DISABLE) + ctrl &= ~PHY_CT_ANE; + + ctrl |= PHY_CT_RESET; + skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + ctrl = 0; + ct1000 = 0; + adv = PHY_SEL_TYPE; + + if (skge->autoneg == AUTONEG_ENABLE) { + if (iscopper(hw)) { + if (skge->advertising & ADVERTISED_1000baseT_Full) + ct1000 |= PHY_M_1000C_AFD; + if (skge->advertising & ADVERTISED_1000baseT_Half) + ct1000 |= PHY_M_1000C_AHD; + if (skge->advertising & ADVERTISED_100baseT_Full) + adv |= PHY_M_AN_100_FD; + if (skge->advertising & ADVERTISED_100baseT_Half) + adv |= PHY_M_AN_100_HD; + if (skge->advertising & ADVERTISED_10baseT_Full) + adv |= PHY_M_AN_10_FD; + if (skge->advertising & ADVERTISED_10baseT_Half) + adv |= PHY_M_AN_10_HD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + adv |= PHY_B_P_NO_PAUSE; + break; + case FLOW_MODE_LOC_SEND: + adv |= PHY_B_P_ASYM_MD; + break; + case FLOW_MODE_SYMMETRIC: + adv |= PHY_B_P_SYM_MD; + break; + case FLOW_MODE_REM_SEND: + adv |= PHY_B_P_BOTH_MD; + break; + } + } else { /* special defines for FIBER (88E1011S only) */ + adv |= PHY_M_AN_1000X_AHD | PHY_M_AN_1000X_AFD; + + /* Set Flow-control capabilities */ + switch (skge->flow_control) { + case FLOW_MODE_NONE: + adv |= PHY_M_P_NO_PAUSE_X; + break; + case FLOW_MODE_LOC_SEND: + adv |= PHY_M_P_ASYM_MD_X; + break; + case FLOW_MODE_SYMMETRIC: + adv |= PHY_M_P_SYM_MD_X; + break; + case FLOW_MODE_REM_SEND: + adv |= PHY_M_P_BOTH_MD_X; + break; + } + } + /* Restart Auto-negotiation */ + ctrl |= PHY_CT_ANE | PHY_CT_RE_CFG; + } else { + /* forced speed/duplex settings */ + ct1000 = PHY_M_1000C_MSE; + + if (skge->duplex == DUPLEX_FULL) + ctrl |= PHY_CT_DUP_MD; + + switch (skge->speed) { + case SPEED_1000: + ctrl |= PHY_CT_SP1000; + break; + case SPEED_100: + ctrl |= PHY_CT_SP100; + break; + } + + ctrl |= PHY_CT_RESET; + } + + if (hw->chip_id != CHIP_ID_YUKON_FE) + skge_gm_phy_write(hw, port, PHY_MARV_1000T_CTRL, ct1000); + + skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, adv); + skge_gm_phy_write(hw, port, PHY_MARV_CTRL, ctrl); + + /* Setup Phy LED's */ + ledctrl = PHY_M_LED_PULS_DUR(PULS_170MS); + ledover = 0; + + if (hw->chip_id == CHIP_ID_YUKON_FE) { + /* on 88E3082 these bits are at 11..9 (shifted left) */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) << 1; + + skge_gm_phy_write(hw, port, PHY_MARV_FE_LED_PAR, + ((skge_gm_phy_read(hw, port, PHY_MARV_FE_LED_PAR) + + & ~PHY_M_FELP_LED1_MSK) + | PHY_M_FELP_LED1_CTRL(LED_PAR_CTRL_ACT_BL))); + } else { + /* set Tx LED (LED_TX) to blink mode on Rx OR Tx activity */ + ledctrl |= PHY_M_LED_BLINK_RT(BLINK_84MS) | PHY_M_LEDC_TX_CTRL; + + /* turn off the Rx LED (LED_RX) */ + ledover |= PHY_M_LED_MO_RX(MO_LED_OFF); + } + + /* disable blink mode (LED_DUPLEX) on collisions */ + ctrl |= PHY_M_LEDC_DP_CTRL; + skge_gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl); + + if (skge->autoneg == AUTONEG_DISABLE || skge->speed == SPEED_100) { + /* turn on 100 Mbps LED (LED_LINK100) */ + ledover |= PHY_M_LED_MO_100(MO_LED_ON); + } + + if (ledover) + skge_gm_phy_write(hw, port, PHY_MARV_LED_OVER, ledover); + + /* Enable phy interrupt on autonegotiation complete (or link up) */ + if (skge->autoneg == AUTONEG_ENABLE) + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_IS_AN_COMPL); + else + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); +} + +static void yukon_reset(struct skge_hw *hw, int port) +{ + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0);/* disable PHY IRQs */ + skge_gma_write16(hw, port, GM_MC_ADDR_H1, 0); /* clear MC hash */ + skge_gma_write16(hw, port, GM_MC_ADDR_H2, 0); + skge_gma_write16(hw, port, GM_MC_ADDR_H3, 0); + skge_gma_write16(hw, port, GM_MC_ADDR_H4, 0); + + skge_gma_write16(hw, port, GM_RX_CTRL, + skge_gma_read16(hw, port, GM_RX_CTRL) + | GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); +} + +static void yukon_mac_init(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + int i; + u32 reg; + const u8 *addr = hw->dev[port]->dev_addr; + + /* WA code for COMA mode -- set PHY reset */ + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + skge_write32(hw, B2_GP_IO, + (skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9)); + + /* hard reset */ + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), GPC_RST_SET); + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_RST_SET); + + /* WA code for COMA mode -- clear PHY reset */ + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + skge_write32(hw, B2_GP_IO, + (skge_read32(hw, B2_GP_IO) | GP_DIR_9) + & ~GP_IO_9); + + /* Set hardware config mode */ + reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP | + GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE; + reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB; + + /* Clear GMC reset */ + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_SET); + skge_write32(hw, SKGEMAC_REG(port, GPHY_CTRL), reg | GPC_RST_CLR); + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON | GMC_RST_CLR); + if (skge->autoneg == AUTONEG_DISABLE) { + reg = GM_GPCR_AU_ALL_DIS; + skge_gma_write16(hw, port, GM_GP_CTRL, + skge_gma_read16(hw, port, GM_GP_CTRL) | reg); + + switch (skge->speed) { + case SPEED_1000: + reg |= GM_GPCR_SPEED_1000; + /* fallthru */ + case SPEED_100: + reg |= GM_GPCR_SPEED_100; + } + + if (skge->duplex == DUPLEX_FULL) + reg |= GM_GPCR_DUP_FULL; + } else + reg = GM_GPCR_SPEED_1000 | GM_GPCR_SPEED_100 | GM_GPCR_DUP_FULL; + switch (skge->flow_control) { + case FLOW_MODE_NONE: + skge_write32(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + reg |= GM_GPCR_FC_TX_DIS | GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + break; + case FLOW_MODE_LOC_SEND: + /* disable Rx flow-control */ + reg |= GM_GPCR_FC_RX_DIS | GM_GPCR_AU_FCT_DIS; + } + + skge_gma_write16(hw, port, GM_GP_CTRL, reg); + skge_read16(hw, GMAC_IRQ_SRC); + + spin_lock_bh(&hw->phy_lock); + yukon_init(hw, port); + spin_unlock_bh(&hw->phy_lock); + + /* MIB clear */ + reg = skge_gma_read16(hw, port, GM_PHY_ADDR); + skge_gma_write16(hw, port, GM_PHY_ADDR, reg | GM_PAR_MIB_CLR); + + for (i = 0; i < GM_MIB_CNT_SIZE; i++) + skge_gma_read16(hw, port, GM_MIB_CNT_BASE + 8*i); + skge_gma_write16(hw, port, GM_PHY_ADDR, reg); + + /* transmit control */ + skge_gma_write16(hw, port, GM_TX_CTRL, TX_COL_THR(TX_COL_DEF)); + + /* receive control reg: unicast + multicast + no FCS */ + skge_gma_write16(hw, port, GM_RX_CTRL, + GM_RXCR_UCF_ENA | GM_RXCR_CRC_DIS | GM_RXCR_MCF_ENA); + + /* transmit flow control */ + skge_gma_write16(hw, port, GM_TX_FLOW_CTRL, 0xffff); + + /* transmit parameter */ + skge_gma_write16(hw, port, GM_TX_PARAM, + TX_JAM_LEN_VAL(TX_JAM_LEN_DEF) | + TX_JAM_IPG_VAL(TX_JAM_IPG_DEF) | + TX_IPG_JAM_DATA(TX_IPG_JAM_DEF)); + + /* serial mode register */ + reg = GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); + if (hw->dev[port]->mtu > 1500) + reg |= GM_SMOD_JUMBO_ENA; + + skge_gma_write16(hw, port, GM_SERIAL_MODE, reg); + + /* physical address: used for pause frames */ + skge_gm_set_addr(hw, port, GM_SRC_ADDR_1L, addr); + /* virtual address for data */ + skge_gm_set_addr(hw, port, GM_SRC_ADDR_2L, addr); + + /* enable interrupt mask for counter overflows */ + skge_gma_write16(hw, port, GM_TX_IRQ_MSK, 0); + skge_gma_write16(hw, port, GM_RX_IRQ_MSK, 0); + skge_gma_write16(hw, port, GM_TR_IRQ_MSK, 0); + + /* Initialize Mac Fifo */ + + /* Configure Rx MAC FIFO */ + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_MSK), RX_FF_FL_DEF_MSK); + reg = GMF_OPER_ON | GMF_RX_F_FL_ON; + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) + reg &= ~GMF_RX_F_FL_ON; + skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), reg); + skge_write16(hw, SKGEMAC_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF); + + /* Configure Tx MAC FIFO */ + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR); + skge_write16(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON); +} + +static void yukon_stop(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (hw->chip_id == CHIP_ID_YUKON_LITE && + chip_rev(hw) == CHIP_REV_YU_LITE_A3) { + skge_write32(hw, B2_GP_IO, + skge_read32(hw, B2_GP_IO) | GP_DIR_9 | GP_IO_9); + } + + skge_gma_write16(hw, port, GM_GP_CTRL, + skge_gma_read16(hw, port, GM_GP_CTRL) + & ~(GM_GPCR_RX_ENA|GM_GPCR_RX_ENA)); + skge_gma_read16(hw, port, GM_GP_CTRL); + + /* set GPHY Control reset */ + skge_gma_write32(hw, port, GPHY_CTRL, GPC_RST_SET); + skge_gma_write32(hw, port, GMAC_CTRL, GMC_RST_SET); +} + +static void yukon_get_stats(struct skge_port *skge, u64 *data) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i; + + data[0] = (u64) skge_gma_read32(hw, port, GM_TXO_OK_HI) << 32 + | skge_gma_read32(hw, port, GM_TXO_OK_LO); + data[1] = (u64) skge_gma_read32(hw, port, GM_RXO_OK_HI) << 32 + | skge_gma_read32(hw, port, GM_RXO_OK_LO); + + for (i = 2; i < ARRAY_SIZE(skge_stats); i++) + data[i] = skge_gma_read32(hw, port, + skge_stats[i].gma_offset); +} + +static void yukon_mac_intr(struct skge_hw *hw, int port) +{ + struct skge_port *skge = netdev_priv(hw->dev[port]); + u8 status = skge_read8(hw, SKGEMAC_REG(port, GMAC_IRQ_SRC)); + + pr_debug("yukon_intr status %x\n", status); + if (status & GM_IS_RX_FF_OR) { + ++skge->net_stats.rx_fifo_errors; + skge_gma_write8(hw, port, RX_GMF_CTRL_T, GMF_CLI_RX_FO); + } + if (status & GM_IS_TX_FF_UR) { + ++skge->net_stats.tx_fifo_errors; + skge_gma_write8(hw, port, TX_GMF_CTRL_T, GMF_CLI_TX_FU); + } + +} + +static u16 yukon_speed(const struct skge_hw *hw, u16 aux) +{ + if (hw->chip_id == CHIP_ID_YUKON_FE) + return (aux & PHY_M_PS_SPEED_100) ? SPEED_100 : SPEED_10; + + switch(aux & PHY_M_PS_SPEED_MSK) { + case PHY_M_PS_SPEED_1000: + return SPEED_1000; + case PHY_M_PS_SPEED_100: + return SPEED_100; + default: + return SPEED_10; + } +} + +static void yukon_link_up(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + u16 reg; + + pr_debug("yukon_link_up\n"); + + /* Enable Transmit FIFO Underrun */ + skge_write8(hw, GMAC_IRQ_MSK, GMAC_DEF_MSK); + + reg = skge_gma_read16(hw, port, GM_GP_CTRL); + if (skge->duplex == DUPLEX_FULL || skge->autoneg == AUTONEG_ENABLE) + reg |= GM_GPCR_DUP_FULL; + + /* enable Rx/Tx */ + reg |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA; + skge_gma_write16(hw, port, GM_GP_CTRL, reg); + + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, PHY_M_DEF_MSK); + skge_link_up(skge); +} + +static void yukon_link_down(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + + pr_debug("yukon_link_down\n"); + skge_gm_phy_write(hw, port, PHY_MARV_INT_MASK, 0); + skge_gm_phy_write(hw, port, GM_GP_CTRL, + skge_gm_phy_read(hw, port, GM_GP_CTRL) + & ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA)); + + if (hw->chip_id != CHIP_ID_YUKON_FE && + skge->flow_control == FLOW_MODE_REM_SEND) { + /* restore Asymmetric Pause bit */ + skge_gm_phy_write(hw, port, PHY_MARV_AUNE_ADV, + skge_gm_phy_read(hw, port, + PHY_MARV_AUNE_ADV) + | PHY_M_AN_ASP); + + } + + yukon_reset(hw, port); + skge_link_down(skge); + + yukon_init(hw, port); +} + +static void yukon_phy_intr(struct skge_port *skge) +{ + struct skge_hw *hw = skge->hw; + int port = skge->port; + const char *reason = NULL; + u16 istatus, phystat; + + istatus = skge_gm_phy_read(hw, port, PHY_MARV_INT_STAT); + phystat = skge_gm_phy_read(hw, port, PHY_MARV_PHY_STAT); + pr_debug("yukon phy intr istat=%x phy_stat=%x\n", istatus, phystat); + + if (istatus & PHY_M_IS_AN_COMPL) { + if (skge_gm_phy_read(hw, port, PHY_MARV_AUNE_LP) + & PHY_M_AN_RF) { + reason = "remote fault"; + goto failed; + } + + if (!(hw->chip_id == CHIP_ID_YUKON_FE || hw->chip_id == CHIP_ID_YUKON_EC) + && (skge_gm_phy_read(hw, port, PHY_MARV_1000T_STAT) + & PHY_B_1000S_MSF)) { + reason = "master/slave fault"; + goto failed; + } + + if (!(phystat & PHY_M_PS_SPDUP_RES)) { + reason = "speed/duplex"; + goto failed; + } + + skge->duplex = (phystat & PHY_M_PS_FULL_DUP) + ? DUPLEX_FULL : DUPLEX_HALF; + skge->speed = yukon_speed(hw, phystat); + + /* Tx & Rx Pause Enabled bits are at 9..8 */ + if (hw->chip_id == CHIP_ID_YUKON_XL) + phystat >>= 6; + + /* We are using IEEE 802.3z/D5.0 Table 37-4 */ + switch (phystat & PHY_M_PS_PAUSE_MSK) { + case PHY_M_PS_PAUSE_MSK: + skge->flow_control = FLOW_MODE_SYMMETRIC; + break; + case PHY_M_PS_RX_P_EN: + skge->flow_control = FLOW_MODE_REM_SEND; + break; + case PHY_M_PS_TX_P_EN: + skge->flow_control = FLOW_MODE_LOC_SEND; + break; + default: + skge->flow_control = FLOW_MODE_NONE; + } + + if (skge->flow_control == FLOW_MODE_NONE || + (skge->speed < SPEED_1000 && skge->duplex == DUPLEX_HALF)) + skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_OFF); + else + skge_write8(hw, SKGEMAC_REG(port, GMAC_CTRL), GMC_PAUSE_ON); + yukon_link_up(skge); + return; + } + + if (istatus & PHY_M_IS_LSP_CHANGE) + skge->speed = yukon_speed(hw, phystat); + + if (istatus & PHY_M_IS_DUP_CHANGE) + skge->duplex = (phystat & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF; + if (istatus & PHY_M_IS_LST_CHANGE) { + if (phystat & PHY_M_PS_LINK_UP) + yukon_link_up(skge); + else + yukon_link_down(skge); + } + return; + failed: + printk(KERN_ERR PFX "%s: autonegotiation failed (%s)\n", + skge->netdev->name, reason); + + /* XXX restart autonegotiation? */ +} + +static void skge_ramset(struct skge_hw *hw, u16 q, u32 start, size_t len) +{ + u32 end; + + start /= 8; + len /= 8; + end = start + len - 1; + + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_RST_CLR); + skge_write32(hw, RB_ADDR(q, RB_START), start); + skge_write32(hw, RB_ADDR(q, RB_WP), start); + skge_write32(hw, RB_ADDR(q, RB_RP), start); + skge_write32(hw, RB_ADDR(q, RB_END), end); + + if (q == Q_R1 || q == Q_R2) { + /* Set thresholds on receive queue's */ + skge_write32(hw, RB_ADDR(q, RB_RX_UTPP), + start + (2*len)/3); + skge_write32(hw, RB_ADDR(q, RB_RX_LTPP), + start + (len/3)); + } else { + /* Enable store & forward on Tx queue's because + * Tx FIFO is only 4K on Genesis and 1K on Yukon + */ + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_STFWD); + } + + skge_write8(hw, RB_ADDR(q, RB_CTRL), RB_ENA_OP_MD); +} + +/* Setup Bus Memory Interface */ +static void skge_qset(struct skge_port *skge, u16 q, + const struct skge_element *e) +{ + struct skge_hw *hw = skge->hw; + u32 watermark = 0x600; + u64 base = skge->dma + (e->desc - skge->mem); + + /* optimization to reduce window on 32bit/33mhz */ + if ((skge_read16(hw, B0_CTST) & (CS_BUS_CLOCK | CS_BUS_SLOT_SZ)) == 0) + watermark /= 2; + + skge_write32(hw, Q_ADDR(q, Q_CSR), CSR_CLR_RESET); + skge_write32(hw, Q_ADDR(q, Q_F), watermark); + skge_write32(hw, Q_ADDR(q, Q_DA_H), (u32)(base >> 32)); + skge_write32(hw, Q_ADDR(q, Q_DA_L), (u32)base); +} + +static int skge_up(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + u32 chunk, ram_addr; + size_t rx_size, tx_size; + int err; + + if (netif_msg_ifup(skge)) + printk(KERN_INFO PFX "%s: enabling interface\n", dev->name); + + rx_size = skge->rx_ring.count * sizeof(struct skge_rx_desc); + tx_size = skge->tx_ring.count * sizeof(struct skge_tx_desc); + skge->mem_size = tx_size + rx_size; + skge->mem = pci_alloc_consistent(hw->pdev, skge->mem_size, &skge->dma); + if (!skge->mem) + return -ENOMEM; + + memset(skge->mem, 0, skge->mem_size); + + if ((err = skge_ring_alloc(&skge->rx_ring, skge->mem, skge->dma))) + goto free_pci_mem; + + if (skge_rx_fill(skge)) + goto free_rx_ring; + + if ((err = skge_ring_alloc(&skge->tx_ring, skge->mem + rx_size, + skge->dma + rx_size))) + goto free_rx_ring; + + skge->tx_avail = skge->tx_ring.count - 1; + + /* Initialze MAC */ + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_mac_init(hw, port); + else + yukon_mac_init(hw, port); + + /* Configure RAMbuffers */ + chunk = hw->ram_size / (isdualport(hw) ? 4 : 2); + ram_addr = hw->ram_offset + 2 * chunk * port; + + skge_ramset(hw, rxqaddr[port], ram_addr, chunk); + skge_qset(skge, rxqaddr[port], skge->rx_ring.to_clean); + + BUG_ON(skge->tx_ring.to_use != skge->tx_ring.to_clean); + skge_ramset(hw, txqaddr[port], ram_addr+chunk, chunk); + skge_qset(skge, txqaddr[port], skge->tx_ring.to_use); + + /* Start receiver BMU */ + wmb(); + skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_START | CSR_IRQ_CL_F); + + pr_debug("skge_up completed\n"); + return 0; + + free_rx_ring: + skge_rx_clean(skge); + kfree(skge->rx_ring.start); + free_pci_mem: + pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + + return err; +} + +static int skge_down(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + + if (netif_msg_ifdown(skge)) + printk(KERN_INFO PFX "%s: disabling interface\n", dev->name); + + netif_stop_queue(dev); + + del_timer_sync(&skge->led_blink); + del_timer_sync(&skge->link_check); + + /* Stop transmitter */ + skge_write8(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_STOP); + skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), + RB_RST_SET|RB_DIS_OP_MD); + + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_stop(skge); + else + yukon_stop(skge); + + /* Disable Force Sync bit and Enable Alloc bit */ + skge_write8(hw, SKGEMAC_REG(port, TXA_CTRL), + TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC); + + /* Stop Interval Timer and Limit Counter of Tx Arbiter */ + skge_write32(hw, SKGEMAC_REG(port, TXA_ITI_INI), 0L); + skge_write32(hw, SKGEMAC_REG(port, TXA_LIM_INI), 0L); + + /* Reset PCI FIFO */ + skge_write32(hw, Q_ADDR(txqaddr[port], Q_CSR), CSR_SET_RESET); + skge_write32(hw, RB_ADDR(txqaddr[port], RB_CTRL), RB_RST_SET); + + /* Reset the RAM Buffer async Tx queue */ + skge_write8(hw, RB_ADDR(port == 0 ? Q_XA1 : Q_XA2, RB_CTRL), RB_RST_SET); + /* stop receiver */ + skge_write8(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_STOP); + skge_write32(hw, RB_ADDR(port ? Q_R2 : Q_R1, RB_CTRL), + RB_RST_SET|RB_DIS_OP_MD); + skge_write32(hw, Q_ADDR(rxqaddr[port], Q_CSR), CSR_SET_RESET); + + if (hw->chip_id == CHIP_ID_GENESIS) { + skge_write8(hw, SKGEMAC_REG(port, TX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, RX_MFF_CTRL2), MFF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, TX_LED_CTRL), LED_STOP); + skge_write8(hw, SKGEMAC_REG(port, RX_LED_CTRL), LED_STOP); + } else { + skge_write8(hw, SKGEMAC_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), GMF_RST_SET); + } + + /* turn off led's */ + skge_write16(hw, B0_LED, LED_STAT_OFF); + + skge_tx_clean(skge); + skge_rx_clean(skge); + + kfree(skge->rx_ring.start); + kfree(skge->tx_ring.start); + pci_free_consistent(hw->pdev, skge->mem_size, skge->mem, skge->dma); + return 0; +} + +static int skge_xmit_frame(struct sk_buff *skb, struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + struct skge_tx_desc *td; + int i; + u32 control, len; + u64 map; + unsigned long flags; + + skb = skb_padto(skb, ETH_ZLEN); + if (!skb) + return NETDEV_TX_OK; + + local_irq_save(flags); + if (!spin_trylock(&skge->tx_lock)) { + /* Collision - tell upper layer to requeue */ + local_irq_restore(flags); + return NETDEV_TX_LOCKED; + } + + if (unlikely(skge->tx_avail < skb_shinfo(skb)->nr_frags +1)) { + netif_stop_queue(dev); + spin_unlock_irqrestore(&skge->tx_lock, flags); + + printk(KERN_WARNING PFX "%s: ring full when queue awake!\n", + dev->name); + return NETDEV_TX_BUSY; + } + + e = ring->to_use; + td = e->desc; + e->skb = skb; + len = skb_headlen(skb); + map = pci_map_single(hw->pdev, skb->data, len, PCI_DMA_TODEVICE); + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, len); + + td->dma_lo = map; + td->dma_hi = map >> 32; + + if (skb->ip_summed == CHECKSUM_HW) { + const struct iphdr *ip + = (const struct iphdr *) (skb->data + ETH_HLEN); + int offset = skb->h.raw - skb->data; + + /* This seems backwards, but it is what the sk98lin + * does. Looks like hardware is wrong? + */ + if (ip->protocol == IPPROTO_UDP + && chip_rev(hw) == 0 && hw->chip_id == CHIP_ID_YUKON) + control = BMU_TCP_CHECK; + else + control = BMU_UDP_CHECK; + + td->csum_offs = 0; + td->csum_start = offset; + td->csum_write = offset + skb->csum; + } else + control = BMU_CHECK; + + if (!skb_shinfo(skb)->nr_frags) /* single buffer i.e. no fragments */ + control |= BMU_EOF| BMU_IRQ_EOF; + else { + struct skge_tx_desc *tf = td; + + control |= BMU_STFWD; + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + map = pci_map_page(hw->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + + e = e->next; + e->skb = NULL; + tf = e->desc; + tf->dma_lo = map; + tf->dma_hi = (u64) map >> 32; + pci_unmap_addr_set(e, mapaddr, map); + pci_unmap_len_set(e, maplen, frag->size); + + tf->control = BMU_OWN | BMU_SW | control | frag->size; + } + tf->control |= BMU_EOF | BMU_IRQ_EOF; + } + /* Make sure all the descriptors written */ + wmb(); + td->control = BMU_OWN | BMU_SW | BMU_STF | control | len; + wmb(); + + skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_START); + + if (netif_msg_tx_queued(skge)) + printk(KERN_DEBUG "%s: tx queued, slot %td, len %d\n", + dev->name, e - ring->start, skb->len); + + ring->to_use = e->next; + skge->tx_avail -= skb_shinfo(skb)->nr_frags + 1; + if (skge->tx_avail <= MAX_SKB_FRAGS + 1) { + pr_debug("%s: transmit queue full\n", dev->name); + netif_stop_queue(dev); + } + + dev->trans_start = jiffies; + spin_unlock_irqrestore(&skge->tx_lock, flags); + + return NETDEV_TX_OK; +} + +static inline void skge_tx_free(struct skge_hw *hw, struct skge_element *e) +{ + if (e->skb) { + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + dev_kfree_skb_any(e->skb); + e->skb = NULL; + } else { + pci_unmap_page(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_TODEVICE); + } +} + +static void skge_tx_clean(struct skge_port *skge) +{ + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + unsigned long flags; + + spin_lock_irqsave(&skge->tx_lock, flags); + for (e = ring->to_clean; e != ring->to_use; e = e->next) { + ++skge->tx_avail; + skge_tx_free(skge->hw, e); + } + ring->to_clean = e; + spin_unlock_irqrestore(&skge->tx_lock, flags); +} + +static void skge_tx_timeout(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + if (netif_msg_timer(skge)) + printk(KERN_DEBUG PFX "%s: tx timeout\n", dev->name); + + skge_write8(skge->hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_STOP); + skge_tx_clean(skge); +} + +static int skge_change_mtu(struct net_device *dev, int new_mtu) +{ + int err = 0; + + if(new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU) + return -EINVAL; + + dev->mtu = new_mtu; + + if (netif_running(dev)) { + skge_down(dev); + skge_up(dev); + } + + return err; +} + +static void genesis_set_multicast(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + int i, count = dev->mc_count; + struct dev_mc_list *list = dev->mc_list; + u32 mode; + u8 filter[8]; + + mode = skge_xm_read32(hw, port, XM_MODE); + mode |= XM_MD_ENA_HASH; + if (dev->flags & IFF_PROMISC) + mode |= XM_MD_ENA_PROM; + else + mode &= ~XM_MD_ENA_PROM; + + if (dev->flags & IFF_ALLMULTI) + memset(filter, 0xff, sizeof(filter)); + else { + memset(filter, 0, sizeof(filter)); + for(i = 0; list && i < count; i++, list = list->next) { + u32 crc = crc32_le(~0, list->dmi_addr, ETH_ALEN); + u8 bit = 63 - (crc & 63); + + filter[bit/8] |= 1 << (bit%8); + } + } + + skge_xm_outhash(hw, port, XM_HSM, filter); + + skge_xm_write32(hw, port, XM_MODE, mode); +} + +static void yukon_set_multicast(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + int port = skge->port; + struct dev_mc_list *list = dev->mc_list; + u16 reg; + u8 filter[8]; + + memset(filter, 0, sizeof(filter)); + + reg = skge_gma_read16(hw, port, GM_RX_CTRL); + reg |= GM_RXCR_UCF_ENA; + + if (dev->flags & IFF_PROMISC) /* promiscious */ + reg &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA); + else if (dev->flags & IFF_ALLMULTI) /* all multicast */ + memset(filter, 0xff, sizeof(filter)); + else if (dev->mc_count == 0) /* no multicast */ + reg &= ~GM_RXCR_MCF_ENA; + else { + int i; + reg |= GM_RXCR_MCF_ENA; + + for(i = 0; list && i < dev->mc_count; i++, list = list->next) { + u32 bit = ether_crc(ETH_ALEN, list->dmi_addr) & 0x3f; + filter[bit/8] |= 1 << (bit%8); + } + } + + + skge_gma_write16(hw, port, GM_MC_ADDR_H1, + (u16)filter[0] | ((u16)filter[1] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H2, + (u16)filter[2] | ((u16)filter[3] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H3, + (u16)filter[4] | ((u16)filter[5] << 8)); + skge_gma_write16(hw, port, GM_MC_ADDR_H4, + (u16)filter[6] | ((u16)filter[7] << 8)); + + skge_gma_write16(hw, port, GM_RX_CTRL, reg); +} + +static inline int bad_phy_status(const struct skge_hw *hw, u32 status) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + return (status & (XMR_FS_ERR | XMR_FS_2L_VLAN)) != 0; + else + return (status & GMR_FS_ANY_ERR) || + (status & GMR_FS_RX_OK) == 0; +} + +static void skge_rx_error(struct skge_port *skge, int slot, + u32 control, u32 status) +{ + if (netif_msg_rx_err(skge)) + printk(KERN_DEBUG PFX "%s: rx err, slot %d control 0x%x status 0x%x\n", + skge->netdev->name, slot, control, status); + + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || (control & BMU_BBC) > skge->netdev->mtu + VLAN_ETH_HLEN) + skge->net_stats.rx_length_errors++; + else { + if (skge->hw->chip_id == CHIP_ID_GENESIS) { + if (status & (XMR_FS_RUNT|XMR_FS_LNG_ERR)) + skge->net_stats.rx_length_errors++; + if (status & XMR_FS_FRA_ERR) + skge->net_stats.rx_frame_errors++; + if (status & XMR_FS_FCS_ERR) + skge->net_stats.rx_crc_errors++; + } else { + if (status & (GMR_FS_LONG_ERR|GMR_FS_UN_SIZE)) + skge->net_stats.rx_length_errors++; + if (status & GMR_FS_FRAGMENT) + skge->net_stats.rx_frame_errors++; + if (status & GMR_FS_CRC_ERR) + skge->net_stats.rx_crc_errors++; + } + } +} + +static int skge_poll(struct net_device *dev, int *budget) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->rx_ring; + struct skge_element *e; + unsigned int to_do = min(dev->quota, *budget); + unsigned int work_done = 0; + int done; + static const u32 irqmask[] = { IS_PORT_1, IS_PORT_2 }; + + for (e = ring->to_clean; e != ring->to_use && work_done < to_do; + e = e->next) { + struct skge_rx_desc *rd = e->desc; + struct sk_buff *skb = e->skb; + u32 control, len, status; + + rmb(); + control = rd->control; + if (control & BMU_OWN) + break; + + len = control & BMU_BBC; + e->skb = NULL; + + pci_unmap_single(hw->pdev, + pci_unmap_addr(e, mapaddr), + pci_unmap_len(e, maplen), + PCI_DMA_FROMDEVICE); + + status = rd->status; + if ((control & (BMU_EOF|BMU_STF)) != (BMU_STF|BMU_EOF) + || len > dev->mtu + VLAN_ETH_HLEN + || bad_phy_status(hw, status)) { + skge_rx_error(skge, e - ring->start, control, status); + dev_kfree_skb(skb); + continue; + } + + if (netif_msg_rx_status(skge)) + printk(KERN_DEBUG PFX "%s: rx slot %td status 0x%x len %d\n", + dev->name, e - ring->start, rd->status, len); + + skb_put(skb, len); + skb->protocol = eth_type_trans(skb, dev); + + if (skge->rx_csum) { + skb->csum = le16_to_cpu(rd->csum2); + skb->ip_summed = CHECKSUM_HW; + } + + dev->last_rx = jiffies; + netif_receive_skb(skb); + + ++work_done; + } + ring->to_clean = e; + + *budget -= work_done; + dev->quota -= work_done; + done = work_done < to_do; + + if (skge_rx_fill(skge)) + done = 0; + + /* restart receiver */ + wmb(); + skge_write8(hw, Q_ADDR(rxqaddr[skge->port], Q_CSR), + CSR_START | CSR_IRQ_CL_F); + + if (done) { + local_irq_disable(); + hw->intr_mask |= irqmask[skge->port]; + /* Order is important since data can get interrupted */ + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_complete(dev); + local_irq_enable(); + } + + return !done; +} + +static inline void skge_tx_intr(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + struct skge_hw *hw = skge->hw; + struct skge_ring *ring = &skge->tx_ring; + struct skge_element *e; + + spin_lock(&skge->tx_lock); + for(e = ring->to_clean; e != ring->to_use; e = e->next) { + struct skge_tx_desc *td = e->desc; + u32 control; + + rmb(); + control = td->control; + if (control & BMU_OWN) + break; + + if (unlikely(netif_msg_tx_done(skge))) + printk(KERN_DEBUG PFX "%s: tx done slot %td status 0x%x\n", + dev->name, e - ring->start, td->status); + + skge_tx_free(hw, e); + e->skb = NULL; + ++skge->tx_avail; + } + ring->to_clean = e; + skge_write8(hw, Q_ADDR(txqaddr[skge->port], Q_CSR), CSR_IRQ_CL_F); + + if (skge->tx_avail > MAX_SKB_FRAGS + 1) + netif_wake_queue(dev); + + spin_unlock(&skge->tx_lock); +} + +static void skge_mac_parity(struct skge_hw *hw, int port) +{ + printk(KERN_ERR PFX "%s: mac data parity error\n", + hw->dev[port] ? hw->dev[port]->name + : (port == 0 ? "(port A)": "(port B")); + + if (hw->chip_id == CHIP_ID_GENESIS) + skge_write16(hw, SKGEMAC_REG(port, TX_MFF_CTRL1), + MFF_CLR_PERR); + else + /* HW-Bug #8: cleared by GMF_CLI_TX_FC instead of GMF_CLI_TX_PE */ + skge_write8(hw, SKGEMAC_REG(port, TX_GMF_CTRL_T), + (hw->chip_id == CHIP_ID_YUKON && chip_rev(hw) == 0) + ? GMF_CLI_TX_FC : GMF_CLI_TX_PE); +} + +static void skge_pci_clear(struct skge_hw *hw) +{ + u16 status; + + status = skge_read16(hw, SKGEPCI_REG(PCI_STATUS)); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON); + skge_write16(hw, SKGEPCI_REG(PCI_STATUS), + status | PCI_STATUS_ERROR_BITS); + skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF); +} + +static void skge_mac_intr(struct skge_hw *hw, int port) +{ + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_mac_intr(hw, port); + else + yukon_mac_intr(hw, port); +} + +/* Handle device specific framing and timeout interrupts */ +static void skge_error_irq(struct skge_hw *hw) +{ + u32 hwstatus = skge_read32(hw, B0_HWE_ISRC); + + if (hw->chip_id == CHIP_ID_GENESIS) { + /* clear xmac errors */ + if (hwstatus & (IS_NO_STAT_M1|IS_NO_TIST_M1)) + skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL1), MFF_CLR_INSTAT); + if (hwstatus & (IS_NO_STAT_M2|IS_NO_TIST_M2)) + skge_write16(hw, SKGEMAC_REG(0, RX_MFF_CTRL2), MFF_CLR_INSTAT); + } else { + /* Timestamp (unused) overflow */ + if (hwstatus & IS_IRQ_TIST_OV) + skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ); + + if (hwstatus & IS_IRQ_SENSOR) { + /* no sensors on 32-bit Yukon */ + if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) { + printk(KERN_ERR PFX "ignoring bogus sensor interrups\n"); + skge_write32(hw, B0_HWE_IMSK, + IS_ERR_MSK & ~IS_IRQ_SENSOR); + } else + printk(KERN_WARNING PFX "sensor interrupt\n"); + } + + + } + + if (hwstatus & IS_RAM_RD_PAR) { + printk(KERN_ERR PFX "Ram read data parity error\n"); + skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR); + } + + if (hwstatus & IS_RAM_WR_PAR) { + printk(KERN_ERR PFX "Ram write data parity error\n"); + skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR); + } + + if (hwstatus & IS_M1_PAR_ERR) + skge_mac_parity(hw, 0); + + if (hwstatus & IS_M2_PAR_ERR) + skge_mac_parity(hw, 1); + + if (hwstatus & IS_R1_PAR_ERR) + skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P); + + if (hwstatus & IS_R2_PAR_ERR) + skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P); + + if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) { + printk(KERN_ERR PFX "hardware error detected (status 0x%x)\n", + hwstatus); + + skge_pci_clear(hw); + + hwstatus = skge_read32(hw, B0_HWE_ISRC); + if (hwstatus & IS_IRQ_STAT) { + printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n", + hwstatus); + hw->intr_mask &= ~IS_HW_ERR; + } + } +} + +/* + * Interrrupt from PHY are handled in tasklet (soft irq) + * because accessing phy registers requires spin wait which might + * cause excess interrupt latency. + */ +static void skge_extirq(unsigned long data) +{ + struct skge_hw *hw = (struct skge_hw *) data; + int port; + + spin_lock(&hw->phy_lock); + for (port = 0; port < 2; port++) { + struct net_device *dev = hw->dev[port]; + + if (dev && netif_running(dev)) { + struct skge_port *skge = netdev_priv(dev); + + if (hw->chip_id != CHIP_ID_GENESIS) + yukon_phy_intr(skge); + else if (hw->phy_type == SK_PHY_BCOM) + genesis_bcom_intr(skge); + } + } + spin_unlock(&hw->phy_lock); + + local_irq_disable(); + hw->intr_mask |= IS_EXT_REG; + skge_write32(hw, B0_IMSK, hw->intr_mask); + local_irq_enable(); +} + +static irqreturn_t skge_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct skge_hw *hw = dev_id; + u32 status = skge_read32(hw, B0_SP_ISRC); + + if (status == 0 || status == ~0) /* hotplug or shared irq */ + return IRQ_NONE; + + status &= hw->intr_mask; + + if ((status & IS_R1_F) && netif_rx_schedule_prep(hw->dev[0])) { + status &= ~IS_R1_F; + hw->intr_mask &= ~IS_R1_F; + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_schedule(hw->dev[0]); + } + + if ((status & IS_R2_F) && netif_rx_schedule_prep(hw->dev[1])) { + status &= ~IS_R2_F; + hw->intr_mask &= ~IS_R2_F; + skge_write32(hw, B0_IMSK, hw->intr_mask); + __netif_rx_schedule(hw->dev[1]); + } + + if (status & IS_XA1_F) + skge_tx_intr(hw->dev[0]); + + if (status & IS_XA2_F) + skge_tx_intr(hw->dev[1]); + + if (status & IS_MAC1) + skge_mac_intr(hw, 0); + + if (status & IS_MAC2) + skge_mac_intr(hw, 1); + + if (status & IS_HW_ERR) + skge_error_irq(hw); + + if (status & IS_EXT_REG) { + hw->intr_mask &= ~IS_EXT_REG; + tasklet_schedule(&hw->ext_tasklet); + } + + if (status) + skge_write32(hw, B0_IMSK, hw->intr_mask); + + return IRQ_HANDLED; +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void skge_netpoll(struct net_device *dev) +{ + struct skge_port *skge = netdev_priv(dev); + + disable_irq(dev->irq); + skge_intr(dev->irq, skge->hw, NULL); + enable_irq(dev->irq); +} +#endif + +static int skge_set_mac_address(struct net_device *dev, void *p) +{ + struct skge_port *skge = netdev_priv(dev); + struct sockaddr *addr = p; + int err = 0; + + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + skge_down(dev); + memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); + memcpy_toio(skge->hw->regs + B2_MAC_1 + skge->port*8, + dev->dev_addr, ETH_ALEN); + memcpy_toio(skge->hw->regs + B2_MAC_2 + skge->port*8, + dev->dev_addr, ETH_ALEN); + if (dev->flags & IFF_UP) + err = skge_up(dev); + return err; +} + +static const struct { + u8 id; + const char *name; +} skge_chips[] = { + { CHIP_ID_GENESIS, "Genesis" }, + { CHIP_ID_YUKON, "Yukon" }, + { CHIP_ID_YUKON_LITE, "Yukon-Lite"}, + { CHIP_ID_YUKON_LP, "Yukon-LP"}, + { CHIP_ID_YUKON_XL, "Yukon-2 XL"}, + { CHIP_ID_YUKON_EC, "YUKON-2 EC"}, + { CHIP_ID_YUKON_FE, "YUKON-2 FE"}, +}; + +static const char *skge_board_name(const struct skge_hw *hw) +{ + int i; + static char buf[16]; + + for (i = 0; i < ARRAY_SIZE(skge_chips); i++) + if (skge_chips[i].id == hw->chip_id) + return skge_chips[i].name; + + snprintf(buf, sizeof buf, "chipid 0x%x", hw->chip_id); + return buf; +} + + +/* + * Setup the board data structure, but don't bring up + * the port(s) + */ +static int skge_reset(struct skge_hw *hw) +{ + u16 ctst; + u8 t8; + int i, ports; + + ctst = skge_read16(hw, B0_CTST); + + /* do a SW reset */ + skge_write8(hw, B0_CTST, CS_RST_SET); + skge_write8(hw, B0_CTST, CS_RST_CLR); + + /* clear PCI errors, if any */ + skge_pci_clear(hw); + + skge_write8(hw, B0_CTST, CS_MRST_CLR); + + /* restore CLK_RUN bits (for Yukon-Lite) */ + skge_write16(hw, B0_CTST, + ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA)); + + hw->chip_id = skge_read8(hw, B2_CHIP_ID); + hw->phy_type = skge_read8(hw, B2_E_1) & 0xf; + hw->pmd_type = skge_read8(hw, B2_PMD_TYP); + + switch(hw->chip_id) { + case CHIP_ID_GENESIS: + switch (hw->phy_type) { + case SK_PHY_XMAC: + hw->phy_addr = PHY_ADDR_XMAC; + break; + case SK_PHY_BCOM: + hw->phy_addr = PHY_ADDR_BCOM; + break; + default: + printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n", + pci_name(hw->pdev), hw->phy_type); + return -EOPNOTSUPP; + } + break; + + case CHIP_ID_YUKON: + case CHIP_ID_YUKON_LITE: + case CHIP_ID_YUKON_LP: + if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S') + hw->phy_type = SK_PHY_MARV_COPPER; + + hw->phy_addr = PHY_ADDR_MARV; + if (!iscopper(hw)) + hw->phy_type = SK_PHY_MARV_FIBER; + + break; + + default: + printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n", + pci_name(hw->pdev), hw->chip_id); + return -EOPNOTSUPP; + } + + hw->mac_cfg = skge_read8(hw, B2_MAC_CFG); + ports = isdualport(hw) ? 2 : 1; + + /* read the adapters RAM size */ + t8 = skge_read8(hw, B2_E_0); + if (hw->chip_id == CHIP_ID_GENESIS) { + if (t8 == 3) { + /* special case: 4 x 64k x 36, offset = 0x80000 */ + hw->ram_size = 0x100000; + hw->ram_offset = 0x80000; + } else + hw->ram_size = t8 * 512; + } + else if (t8 == 0) + hw->ram_size = 0x20000; + else + hw->ram_size = t8 * 4096; + + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_init(hw); + else { + /* switch power to VCC (WA for VAUX problem) */ + skge_write8(hw, B0_POWER_CTRL, + PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON); + for (i = 0; i < ports; i++) { + skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET); + skge_write16(hw, SKGEMAC_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR); + } + } + + /* turn off hardware timer (unused) */ + skge_write8(hw, B2_TI_CTRL, TIM_STOP); + skge_write8(hw, B2_TI_CTRL, TIM_CLR_IRQ); + skge_write8(hw, B0_LED, LED_STAT_ON); + + /* enable the Tx Arbiters */ + for (i = 0; i < ports; i++) + skge_write8(hw, SKGEMAC_REG(i, TXA_CTRL), TXA_ENA_ARB); + + /* Initialize ram interface */ + skge_write16(hw, B3_RI_CTRL, RI_RST_CLR); + + skge_write8(hw, B3_RI_WTO_R1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XA1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XS1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_R1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XA1, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XS1, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_R2, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XA2, SK_RI_TO_53); + skge_write8(hw, B3_RI_WTO_XS2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_R2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XA2, SK_RI_TO_53); + skge_write8(hw, B3_RI_RTO_XS2, SK_RI_TO_53); + + skge_write32(hw, B0_HWE_IMSK, IS_ERR_MSK); + + /* Set interrupt moderation for Transmit only + * Receive interrupts avoided by NAPI + */ + skge_write32(hw, B2_IRQM_MSK, IS_XA1_F|IS_XA2_F); + skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100)); + skge_write32(hw, B2_IRQM_CTRL, TIM_START); + + hw->intr_mask = IS_HW_ERR | IS_EXT_REG | IS_PORT_1; + if (isdualport(hw)) + hw->intr_mask |= IS_PORT_2; + skge_write32(hw, B0_IMSK, hw->intr_mask); + + if (hw->chip_id != CHIP_ID_GENESIS) + skge_write8(hw, GMAC_IRQ_MSK, 0); + + spin_lock_bh(&hw->phy_lock); + for (i = 0; i < ports; i++) { + if (hw->chip_id == CHIP_ID_GENESIS) + genesis_reset(hw, i); + else + yukon_reset(hw, i); + } + spin_unlock_bh(&hw->phy_lock); + + return 0; +} + +/* Initialize network device */ +static struct net_device *skge_devinit(struct skge_hw *hw, int port) +{ + struct skge_port *skge; + struct net_device *dev = alloc_etherdev(sizeof(*skge)); + + if (!dev) { + printk(KERN_ERR "skge etherdev alloc failed"); + return NULL; + } + + SET_MODULE_OWNER(dev); + SET_NETDEV_DEV(dev, &hw->pdev->dev); + dev->open = skge_up; + dev->stop = skge_down; + dev->hard_start_xmit = skge_xmit_frame; + dev->get_stats = skge_get_stats; + if (hw->chip_id == CHIP_ID_GENESIS) + dev->set_multicast_list = genesis_set_multicast; + else + dev->set_multicast_list = yukon_set_multicast; + + dev->set_mac_address = skge_set_mac_address; + dev->change_mtu = skge_change_mtu; + SET_ETHTOOL_OPS(dev, &skge_ethtool_ops); + dev->tx_timeout = skge_tx_timeout; + dev->watchdog_timeo = TX_WATCHDOG; + dev->poll = skge_poll; + dev->weight = NAPI_WEIGHT; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = skge_netpoll; +#endif + dev->irq = hw->pdev->irq; + dev->features = NETIF_F_LLTX; + + skge = netdev_priv(dev); + skge->netdev = dev; + skge->hw = hw; + skge->msg_enable = netif_msg_init(debug, default_msg); + skge->tx_ring.count = DEFAULT_TX_RING_SIZE; + skge->rx_ring.count = DEFAULT_RX_RING_SIZE; + + /* Auto speed and flow control */ + skge->autoneg = AUTONEG_ENABLE; + skge->flow_control = FLOW_MODE_SYMMETRIC; + skge->duplex = -1; + skge->speed = -1; + skge->advertising = skge_modes(hw); + + hw->dev[port] = dev; + + skge->port = port; + + spin_lock_init(&skge->tx_lock); + + init_timer(&skge->link_check); + skge->link_check.function = skge_link_timer; + skge->link_check.data = (unsigned long) skge; + + init_timer(&skge->led_blink); + skge->led_blink.function = skge_blink_timer; + skge->led_blink.data = (unsigned long) skge; + + if (hw->chip_id != CHIP_ID_GENESIS) { + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; + skge->rx_csum = 1; + } + + /* read the mac address */ + memcpy_fromio(dev->dev_addr, hw->regs + B2_MAC_1 + port*8, ETH_ALEN); + + /* device is off until link detection */ + netif_carrier_off(dev); + netif_stop_queue(dev); + + return dev; +} + +static void __devinit skge_show_addr(struct net_device *dev) +{ + const struct skge_port *skge = netdev_priv(dev); + + if (netif_msg_probe(skge)) + printk(KERN_INFO PFX "%s: addr %02x:%02x:%02x:%02x:%02x:%02x\n", + dev->name, + dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], + dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); +} + +static int __devinit skge_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct net_device *dev, *dev1; + struct skge_hw *hw; + int err, using_dac = 0; + + if ((err = pci_enable_device(pdev))) { + printk(KERN_ERR PFX "%s cannot enable PCI device\n", + pci_name(pdev)); + goto err_out; + } + + if ((err = pci_request_regions(pdev, DRV_NAME))) { + printk(KERN_ERR PFX "%s cannot obtain PCI resources\n", + pci_name(pdev)); + goto err_out_disable_pdev; + } + + pci_set_master(pdev); + + if (!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) + using_dac = 1; + else if (!(err = pci_set_dma_mask(pdev, DMA_32BIT_MASK))) { + printk(KERN_ERR PFX "%s no usable DMA configuration\n", + pci_name(pdev)); + goto err_out_free_regions; + } + +#ifdef __BIG_ENDIAN + /* byte swap decriptors in hardware */ + { + u32 reg; + + pci_read_config_dword(pdev, PCI_DEV_REG2, ®); + reg |= PCI_REV_DESC; + pci_write_config_dword(pdev, PCI_DEV_REG2, reg); + } +#endif + + err = -ENOMEM; + hw = kmalloc(sizeof(*hw), GFP_KERNEL); + if (!hw) { + printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n", + pci_name(pdev)); + goto err_out_free_regions; + } + + memset(hw, 0, sizeof(*hw)); + hw->pdev = pdev; + spin_lock_init(&hw->phy_lock); + tasklet_init(&hw->ext_tasklet, skge_extirq, (unsigned long) hw); + + hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000); + if (!hw->regs) { + printk(KERN_ERR PFX "%s: cannot map device registers\n", + pci_name(pdev)); + goto err_out_free_hw; + } + + if ((err = request_irq(pdev->irq, skge_intr, SA_SHIRQ, DRV_NAME, hw))) { + printk(KERN_ERR PFX "%s: cannot assign irq %d\n", + pci_name(pdev), pdev->irq); + goto err_out_iounmap; + } + pci_set_drvdata(pdev, hw); + + err = skge_reset(hw); + if (err) + goto err_out_free_irq; + + printk(KERN_INFO PFX "addr 0x%lx irq %d chip %s rev %d\n", + pci_resource_start(pdev, 0), pdev->irq, + skge_board_name(hw), chip_rev(hw)); + + if ((dev = skge_devinit(hw, 0)) == NULL) + goto err_out_led_off; + + if (using_dac) + dev->features |= NETIF_F_HIGHDMA; + + if ((err = register_netdev(dev))) { + printk(KERN_ERR PFX "%s: cannot register net device\n", + pci_name(pdev)); + goto err_out_free_netdev; + } + + skge_show_addr(dev); + + if (isdualport(hw) && (dev1 = skge_devinit(hw, 1))) { + if (using_dac) + dev1->features |= NETIF_F_HIGHDMA; + + if (register_netdev(dev1) == 0) + skge_show_addr(dev1); + else { + /* Failure to register second port need not be fatal */ + printk(KERN_WARNING PFX "register of second port failed\n"); + hw->dev[1] = NULL; + free_netdev(dev1); + } + } + + return 0; + +err_out_free_netdev: + free_netdev(dev); +err_out_led_off: + skge_write16(hw, B0_LED, LED_STAT_OFF); +err_out_free_irq: + free_irq(pdev->irq, hw); +err_out_iounmap: + iounmap(hw->regs); +err_out_free_hw: + kfree(hw); +err_out_free_regions: + pci_release_regions(pdev); +err_out_disable_pdev: + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); +err_out: + return err; +} + +static void __devexit skge_remove(struct pci_dev *pdev) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + struct net_device *dev0, *dev1; + + if(!hw) + return; + + if ((dev1 = hw->dev[1])) + unregister_netdev(dev1); + dev0 = hw->dev[0]; + unregister_netdev(dev0); + + tasklet_kill(&hw->ext_tasklet); + + free_irq(pdev->irq, hw); + pci_release_regions(pdev); + pci_disable_device(pdev); + if (dev1) + free_netdev(dev1); + free_netdev(dev0); + skge_write16(hw, B0_LED, LED_STAT_OFF); + iounmap(hw->regs); + kfree(hw); + pci_set_drvdata(pdev, NULL); +} + +#ifdef CONFIG_PM +static int skge_suspend(struct pci_dev *pdev, u32 state) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + int i, wol = 0; + + for(i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + + if (dev) { + struct skge_port *skge = netdev_priv(dev); + if (netif_running(dev)) { + netif_carrier_off(dev); + skge_down(dev); + } + netif_device_detach(dev); + wol |= skge->wol; + } + } + + pci_save_state(pdev); + pci_enable_wake(pdev, state, wol); + pci_disable_device(pdev); + pci_set_power_state(pdev, pci_choose_state(pdev, state)); + + return 0; +} + +static int skge_resume(struct pci_dev *pdev) +{ + struct skge_hw *hw = pci_get_drvdata(pdev); + int i; + + pci_set_power_state(pdev, PCI_D0); + pci_restore_state(pdev); + pci_enable_wake(pdev, PCI_D0, 0); + + skge_reset(hw); + + for(i = 0; i < 2; i++) { + struct net_device *dev = hw->dev[i]; + if (dev) { + netif_device_attach(dev); + if(netif_running(dev)) + skge_up(dev); + } + } + return 0; +} +#endif + +static struct pci_driver skge_driver = { + .name = DRV_NAME, + .id_table = skge_id_table, + .probe = skge_probe, + .remove = __devexit_p(skge_remove), +#ifdef CONFIG_PM + .suspend = skge_suspend, + .resume = skge_resume, +#endif +}; + +static int __init skge_init_module(void) +{ + return pci_module_init(&skge_driver); +} + +static void __exit skge_cleanup_module(void) +{ + pci_unregister_driver(&skge_driver); +} + +module_init(skge_init_module); +module_exit(skge_cleanup_module); diff --git a/drivers/net/skge.h b/drivers/net/skge.h new file mode 100644 index 00000000000..36c62b68fab --- /dev/null +++ b/drivers/net/skge.h @@ -0,0 +1,3005 @@ +/* + * Definitions for the new Marvell Yukon / SysKonenct driver. + */ +#ifndef _SKGE_H +#define _SKGE_H + +/* PCI config registers */ +#define PCI_DEV_REG1 0x40 +#define PCI_DEV_REG2 0x44 +#ifndef PCI_VPD +#define PCI_VPD 0x50 +#endif + +/* PCI_OUR_REG_2 32 bit Our Register 2 */ +enum { + PCI_VPD_WR_THR = 0xff<<24, /* Bit 31..24: VPD Write Threshold */ + PCI_DEV_SEL = 0x7f<<17, /* Bit 23..17: EEPROM Device Select */ + PCI_VPD_ROM_SZ = 7 <<14, /* Bit 16..14: VPD ROM Size */ + /* Bit 13..12: reserved */ + PCI_EN_DUMMY_RD = 1<<3, /* Enable Dummy Read */ + PCI_REV_DESC = 1<<2, /* Reverse Desc. Bytes */ + PCI_USEDATA64 = 1<<0, /* Use 64Bit Data bus ext */ +}; + +/* PCI_VPD_ADR_REG 16 bit VPD Address Register */ +enum { + PCI_VPD_FLAG = 1<<15, /* starts VPD rd/wr cycle */ + PCI_VPD_ADR_MSK =0x7fffL, /* Bit 14.. 0: VPD Address Mask */ + VPD_RES_ID = 0x82, + VPD_RES_READ = 0x90, + VPD_RES_WRITE = 0x81, + VPD_RES_END = 0x78, +}; + + +#define PCI_STATUS_ERROR_BITS (PCI_STATUS_DETECTED_PARITY | \ + PCI_STATUS_SIG_SYSTEM_ERROR | \ + PCI_STATUS_REC_MASTER_ABORT | \ + PCI_STATUS_REC_TARGET_ABORT | \ + PCI_STATUS_PARITY) + + +enum csr_regs { + B0_RAP = 0x0000, + B0_CTST = 0x0004, + B0_LED = 0x0006, + B0_POWER_CTRL = 0x0007, + B0_ISRC = 0x0008, + B0_IMSK = 0x000c, + B0_HWE_ISRC = 0x0010, + B0_HWE_IMSK = 0x0014, + B0_SP_ISRC = 0x0018, + B0_XM1_IMSK = 0x0020, + B0_XM1_ISRC = 0x0028, + B0_XM1_PHY_ADDR = 0x0030, + B0_XM1_PHY_DATA = 0x0034, + B0_XM2_IMSK = 0x0040, + B0_XM2_ISRC = 0x0048, + B0_XM2_PHY_ADDR = 0x0050, + B0_XM2_PHY_DATA = 0x0054, + B0_R1_CSR = 0x0060, + B0_R2_CSR = 0x0064, + B0_XS1_CSR = 0x0068, + B0_XA1_CSR = 0x006c, + B0_XS2_CSR = 0x0070, + B0_XA2_CSR = 0x0074, + + B2_MAC_1 = 0x0100, + B2_MAC_2 = 0x0108, + B2_MAC_3 = 0x0110, + B2_CONN_TYP = 0x0118, + B2_PMD_TYP = 0x0119, + B2_MAC_CFG = 0x011a, + B2_CHIP_ID = 0x011b, + B2_E_0 = 0x011c, + B2_E_1 = 0x011d, + B2_E_2 = 0x011e, + B2_E_3 = 0x011f, + B2_FAR = 0x0120, + B2_FDP = 0x0124, + B2_LD_CTRL = 0x0128, + B2_LD_TEST = 0x0129, + B2_TI_INI = 0x0130, + B2_TI_VAL = 0x0134, + B2_TI_CTRL = 0x0138, + B2_TI_TEST = 0x0139, + B2_IRQM_INI = 0x0140, + B2_IRQM_VAL = 0x0144, + B2_IRQM_CTRL = 0x0148, + B2_IRQM_TEST = 0x0149, + B2_IRQM_MSK = 0x014c, + B2_IRQM_HWE_MSK = 0x0150, + B2_TST_CTRL1 = 0x0158, + B2_TST_CTRL2 = 0x0159, + B2_GP_IO = 0x015c, + B2_I2C_CTRL = 0x0160, + B2_I2C_DATA = 0x0164, + B2_I2C_IRQ = 0x0168, + B2_I2C_SW = 0x016c, + B2_BSC_INI = 0x0170, + B2_BSC_VAL = 0x0174, + B2_BSC_CTRL = 0x0178, + B2_BSC_STAT = 0x0179, + B2_BSC_TST = 0x017a, + + B3_RAM_ADDR = 0x0180, + B3_RAM_DATA_LO = 0x0184, + B3_RAM_DATA_HI = 0x0188, + B3_RI_WTO_R1 = 0x0190, + B3_RI_WTO_XA1 = 0x0191, + B3_RI_WTO_XS1 = 0x0192, + B3_RI_RTO_R1 = 0x0193, + B3_RI_RTO_XA1 = 0x0194, + B3_RI_RTO_XS1 = 0x0195, + B3_RI_WTO_R2 = 0x0196, + B3_RI_WTO_XA2 = 0x0197, + B3_RI_WTO_XS2 = 0x0198, + B3_RI_RTO_R2 = 0x0199, + B3_RI_RTO_XA2 = 0x019a, + B3_RI_RTO_XS2 = 0x019b, + B3_RI_TO_VAL = 0x019c, + B3_RI_CTRL = 0x01a0, + B3_RI_TEST = 0x01a2, + B3_MA_TOINI_RX1 = 0x01b0, + B3_MA_TOINI_RX2 = 0x01b1, + B3_MA_TOINI_TX1 = 0x01b2, + B3_MA_TOINI_TX2 = 0x01b3, + B3_MA_TOVAL_RX1 = 0x01b4, + B3_MA_TOVAL_RX2 = 0x01b5, + B3_MA_TOVAL_TX1 = 0x01b6, + B3_MA_TOVAL_TX2 = 0x01b7, + B3_MA_TO_CTRL = 0x01b8, + B3_MA_TO_TEST = 0x01ba, + B3_MA_RCINI_RX1 = 0x01c0, + B3_MA_RCINI_RX2 = 0x01c1, + B3_MA_RCINI_TX1 = 0x01c2, + B3_MA_RCINI_TX2 = 0x01c3, + B3_MA_RCVAL_RX1 = 0x01c4, + B3_MA_RCVAL_RX2 = 0x01c5, + B3_MA_RCVAL_TX1 = 0x01c6, + B3_MA_RCVAL_TX2 = 0x01c7, + B3_MA_RC_CTRL = 0x01c8, + B3_MA_RC_TEST = 0x01ca, + B3_PA_TOINI_RX1 = 0x01d0, + B3_PA_TOINI_RX2 = 0x01d4, + B3_PA_TOINI_TX1 = 0x01d8, + B3_PA_TOINI_TX2 = 0x01dc, + B3_PA_TOVAL_RX1 = 0x01e0, + B3_PA_TOVAL_RX2 = 0x01e4, + B3_PA_TOVAL_TX1 = 0x01e8, + B3_PA_TOVAL_TX2 = 0x01ec, + B3_PA_CTRL = 0x01f0, + B3_PA_TEST = 0x01f2, +}; + +/* B0_CTST 16 bit Control/Status register */ +enum { + CS_CLK_RUN_HOT = 1<<13,/* CLK_RUN hot m. (YUKON-Lite only) */ + CS_CLK_RUN_RST = 1<<12,/* CLK_RUN reset (YUKON-Lite only) */ + CS_CLK_RUN_ENA = 1<<11,/* CLK_RUN enable (YUKON-Lite only) */ + CS_VAUX_AVAIL = 1<<10,/* VAUX available (YUKON only) */ + CS_BUS_CLOCK = 1<<9, /* Bus Clock 0/1 = 33/66 MHz */ + CS_BUS_SLOT_SZ = 1<<8, /* Slot Size 0/1 = 32/64 bit slot */ + CS_ST_SW_IRQ = 1<<7, /* Set IRQ SW Request */ + CS_CL_SW_IRQ = 1<<6, /* Clear IRQ SW Request */ + CS_STOP_DONE = 1<<5, /* Stop Master is finished */ + CS_STOP_MAST = 1<<4, /* Command Bit to stop the master */ + CS_MRST_CLR = 1<<3, /* Clear Master reset */ + CS_MRST_SET = 1<<2, /* Set Master reset */ + CS_RST_CLR = 1<<1, /* Clear Software reset */ + CS_RST_SET = 1, /* Set Software reset */ + +/* B0_LED 8 Bit LED register */ +/* Bit 7.. 2: reserved */ + LED_STAT_ON = 1<<1, /* Status LED on */ + LED_STAT_OFF = 1, /* Status LED off */ + +/* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ + PC_VAUX_ENA = 1<<7, /* Switch VAUX Enable */ + PC_VAUX_DIS = 1<<6, /* Switch VAUX Disable */ + PC_VCC_ENA = 1<<5, /* Switch VCC Enable */ + PC_VCC_DIS = 1<<4, /* Switch VCC Disable */ + PC_VAUX_ON = 1<<3, /* Switch VAUX On */ + PC_VAUX_OFF = 1<<2, /* Switch VAUX Off */ + PC_VCC_ON = 1<<1, /* Switch VCC On */ + PC_VCC_OFF = 1<<0, /* Switch VCC Off */ +}; + +/* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ +enum { + IS_ALL_MSK = 0xbffffffful, /* All Interrupt bits */ + IS_HW_ERR = 1<<31, /* Interrupt HW Error */ + /* Bit 30: reserved */ + IS_PA_TO_RX1 = 1<<29, /* Packet Arb Timeout Rx1 */ + IS_PA_TO_RX2 = 1<<28, /* Packet Arb Timeout Rx2 */ + IS_PA_TO_TX1 = 1<<27, /* Packet Arb Timeout Tx1 */ + IS_PA_TO_TX2 = 1<<26, /* Packet Arb Timeout Tx2 */ + IS_I2C_READY = 1<<25, /* IRQ on end of I2C Tx */ + IS_IRQ_SW = 1<<24, /* SW forced IRQ */ + IS_EXT_REG = 1<<23, /* IRQ from LM80 or PHY (GENESIS only) */ + /* IRQ from PHY (YUKON only) */ + IS_TIMINT = 1<<22, /* IRQ from Timer */ + IS_MAC1 = 1<<21, /* IRQ from MAC 1 */ + IS_LNK_SYNC_M1 = 1<<20, /* Link Sync Cnt wrap MAC 1 */ + IS_MAC2 = 1<<19, /* IRQ from MAC 2 */ + IS_LNK_SYNC_M2 = 1<<18, /* Link Sync Cnt wrap MAC 2 */ +/* Receive Queue 1 */ + IS_R1_B = 1<<17, /* Q_R1 End of Buffer */ + IS_R1_F = 1<<16, /* Q_R1 End of Frame */ + IS_R1_C = 1<<15, /* Q_R1 Encoding Error */ +/* Receive Queue 2 */ + IS_R2_B = 1<<14, /* Q_R2 End of Buffer */ + IS_R2_F = 1<<13, /* Q_R2 End of Frame */ + IS_R2_C = 1<<12, /* Q_R2 Encoding Error */ +/* Synchronous Transmit Queue 1 */ + IS_XS1_B = 1<<11, /* Q_XS1 End of Buffer */ + IS_XS1_F = 1<<10, /* Q_XS1 End of Frame */ + IS_XS1_C = 1<<9, /* Q_XS1 Encoding Error */ +/* Asynchronous Transmit Queue 1 */ + IS_XA1_B = 1<<8, /* Q_XA1 End of Buffer */ + IS_XA1_F = 1<<7, /* Q_XA1 End of Frame */ + IS_XA1_C = 1<<6, /* Q_XA1 Encoding Error */ +/* Synchronous Transmit Queue 2 */ + IS_XS2_B = 1<<5, /* Q_XS2 End of Buffer */ + IS_XS2_F = 1<<4, /* Q_XS2 End of Frame */ + IS_XS2_C = 1<<3, /* Q_XS2 Encoding Error */ +/* Asynchronous Transmit Queue 2 */ + IS_XA2_B = 1<<2, /* Q_XA2 End of Buffer */ + IS_XA2_F = 1<<1, /* Q_XA2 End of Frame */ + IS_XA2_C = 1<<0, /* Q_XA2 Encoding Error */ + + IS_PORT_1 = IS_XA1_F| IS_R1_F| IS_MAC1, + IS_PORT_2 = IS_XA2_F| IS_R2_F| IS_MAC2, +}; + + +/* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ +enum { + IS_ERR_MSK = 0x00003fff,/* All Error bits */ + + IS_IRQ_TIST_OV = 1<<13, /* Time Stamp Timer Overflow (YUKON only) */ + IS_IRQ_SENSOR = 1<<12, /* IRQ from Sensor (YUKON only) */ + IS_IRQ_MST_ERR = 1<<11, /* IRQ master error detected */ + IS_IRQ_STAT = 1<<10, /* IRQ status exception */ + IS_NO_STAT_M1 = 1<<9, /* No Rx Status from MAC 1 */ + IS_NO_STAT_M2 = 1<<8, /* No Rx Status from MAC 2 */ + IS_NO_TIST_M1 = 1<<7, /* No Time Stamp from MAC 1 */ + IS_NO_TIST_M2 = 1<<6, /* No Time Stamp from MAC 2 */ + IS_RAM_RD_PAR = 1<<5, /* RAM Read Parity Error */ + IS_RAM_WR_PAR = 1<<4, /* RAM Write Parity Error */ + IS_M1_PAR_ERR = 1<<3, /* MAC 1 Parity Error */ + IS_M2_PAR_ERR = 1<<2, /* MAC 2 Parity Error */ + IS_R1_PAR_ERR = 1<<1, /* Queue R1 Parity Error */ + IS_R2_PAR_ERR = 1<<0, /* Queue R2 Parity Error */ +}; + +/* B2_TST_CTRL1 8 bit Test Control Register 1 */ +enum { + TST_FRC_DPERR_MR = 1<<7, /* force DATAPERR on MST RD */ + TST_FRC_DPERR_MW = 1<<6, /* force DATAPERR on MST WR */ + TST_FRC_DPERR_TR = 1<<5, /* force DATAPERR on TRG RD */ + TST_FRC_DPERR_TW = 1<<4, /* force DATAPERR on TRG WR */ + TST_FRC_APERR_M = 1<<3, /* force ADDRPERR on MST */ + TST_FRC_APERR_T = 1<<2, /* force ADDRPERR on TRG */ + TST_CFG_WRITE_ON = 1<<1, /* Enable Config Reg WR */ + TST_CFG_WRITE_OFF= 1<<0, /* Disable Config Reg WR */ +}; + +/* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ +enum { + CFG_CHIP_R_MSK = 0xf<<4, /* Bit 7.. 4: Chip Revision */ + /* Bit 3.. 2: reserved */ + CFG_DIS_M2_CLK = 1<<1, /* Disable Clock for 2nd MAC */ + CFG_SNG_MAC = 1<<0, /* MAC Config: 0=2 MACs / 1=1 MAC*/ +}; + +/* B2_CHIP_ID 8 bit Chip Identification Number */ +enum { + CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */ + CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */ + CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */ + CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */ + CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */ + CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */ + CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */ + + CHIP_REV_YU_LITE_A1 = 3, /* Chip Rev. for YUKON-Lite A1,A2 */ + CHIP_REV_YU_LITE_A3 = 7, /* Chip Rev. for YUKON-Lite A3 */ +}; + +/* B2_LD_TEST 8 bit EPROM loader test register */ +enum { + LD_T_ON = 1<<3, /* Loader Test mode on */ + LD_T_OFF = 1<<2, /* Loader Test mode off */ + LD_T_STEP = 1<<1, /* Decrement FPROM addr. Counter */ + LD_START = 1<<0, /* Start loading FPROM */ +}; + +/* B2_TI_CTRL 8 bit Timer control */ +/* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ +enum { + TIM_START = 1<<2, /* Start Timer */ + TIM_STOP = 1<<1, /* Stop Timer */ + TIM_CLR_IRQ = 1<<0, /* Clear Timer IRQ (!IRQM) */ +}; + +/* B2_TI_TEST 8 Bit Timer Test */ +/* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ +/* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ +enum { + TIM_T_ON = 1<<2, /* Test mode on */ + TIM_T_OFF = 1<<1, /* Test mode off */ + TIM_T_STEP = 1<<0, /* Test step */ +}; + +/* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ +/* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ +/* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ +enum { + DPT_MSK = 0x00ffffffL, /* Bit 23.. 0: Desc Poll Timer Bits */ + + DPT_START = 1<<1, /* Start Descriptor Poll Timer */ + DPT_STOP = 1<<0, /* Stop Descriptor Poll Timer */ +}; + +/* B2_GP_IO 32 bit General Purpose I/O Register */ +enum { + GP_DIR_9 = 1<<25, /* IO_9 direct, 0=In/1=Out */ + GP_DIR_8 = 1<<24, /* IO_8 direct, 0=In/1=Out */ + GP_DIR_7 = 1<<23, /* IO_7 direct, 0=In/1=Out */ + GP_DIR_6 = 1<<22, /* IO_6 direct, 0=In/1=Out */ + GP_DIR_5 = 1<<21, /* IO_5 direct, 0=In/1=Out */ + GP_DIR_4 = 1<<20, /* IO_4 direct, 0=In/1=Out */ + GP_DIR_3 = 1<<19, /* IO_3 direct, 0=In/1=Out */ + GP_DIR_2 = 1<<18, /* IO_2 direct, 0=In/1=Out */ + GP_DIR_1 = 1<<17, /* IO_1 direct, 0=In/1=Out */ + GP_DIR_0 = 1<<16, /* IO_0 direct, 0=In/1=Out */ + + GP_IO_9 = 1<<9, /* IO_9 pin */ + GP_IO_8 = 1<<8, /* IO_8 pin */ + GP_IO_7 = 1<<7, /* IO_7 pin */ + GP_IO_6 = 1<<6, /* IO_6 pin */ + GP_IO_5 = 1<<5, /* IO_5 pin */ + GP_IO_4 = 1<<4, /* IO_4 pin */ + GP_IO_3 = 1<<3, /* IO_3 pin */ + GP_IO_2 = 1<<2, /* IO_2 pin */ + GP_IO_1 = 1<<1, /* IO_1 pin */ + GP_IO_0 = 1<<0, /* IO_0 pin */ +}; + +/* Rx/Tx Path related Arbiter Test Registers */ +/* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ +/* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ +/* B3_PA_TEST 16 bit Packet Arbiter Test Register */ +/* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ +enum { + TX2_T_EV = 1<<15,/* TX2 Timeout/Recv Event occured */ + TX2_T_ON = 1<<14,/* TX2 Timeout/Recv Timer Test On */ + TX2_T_OFF = 1<<13,/* TX2 Timeout/Recv Timer Tst Off */ + TX2_T_STEP = 1<<12,/* TX2 Timeout/Recv Timer Step */ + TX1_T_EV = 1<<11,/* TX1 Timeout/Recv Event occured */ + TX1_T_ON = 1<<10,/* TX1 Timeout/Recv Timer Test On */ + TX1_T_OFF = 1<<9, /* TX1 Timeout/Recv Timer Tst Off */ + TX1_T_STEP = 1<<8, /* TX1 Timeout/Recv Timer Step */ + RX2_T_EV = 1<<7, /* RX2 Timeout/Recv Event occured */ + RX2_T_ON = 1<<6, /* RX2 Timeout/Recv Timer Test On */ + RX2_T_OFF = 1<<5, /* RX2 Timeout/Recv Timer Tst Off */ + RX2_T_STEP = 1<<4, /* RX2 Timeout/Recv Timer Step */ + RX1_T_EV = 1<<3, /* RX1 Timeout/Recv Event occured */ + RX1_T_ON = 1<<2, /* RX1 Timeout/Recv Timer Test On */ + RX1_T_OFF = 1<<1, /* RX1 Timeout/Recv Timer Tst Off */ + RX1_T_STEP = 1<<0, /* RX1 Timeout/Recv Timer Step */ +}; + +/* Descriptor Bit Definition */ +/* TxCtrl Transmit Buffer Control Field */ +/* RxCtrl Receive Buffer Control Field */ +enum { + BMU_OWN = 1<<31, /* OWN bit: 0=host/1=BMU */ + BMU_STF = 1<<30, /* Start of Frame */ + BMU_EOF = 1<<29, /* End of Frame */ + BMU_IRQ_EOB = 1<<28, /* Req "End of Buffer" IRQ */ + BMU_IRQ_EOF = 1<<27, /* Req "End of Frame" IRQ */ + /* TxCtrl specific bits */ + BMU_STFWD = 1<<26, /* (Tx) Store & Forward Frame */ + BMU_NO_FCS = 1<<25, /* (Tx) Disable MAC FCS (CRC) generation */ + BMU_SW = 1<<24, /* (Tx) 1 bit res. for SW use */ + /* RxCtrl specific bits */ + BMU_DEV_0 = 1<<26, /* (Rx) Transfer data to Dev0 */ + BMU_STAT_VAL = 1<<25, /* (Rx) Rx Status Valid */ + BMU_TIST_VAL = 1<<24, /* (Rx) Rx TimeStamp Valid */ + /* Bit 23..16: BMU Check Opcodes */ + BMU_CHECK = 0x55<<16, /* Default BMU check */ + BMU_TCP_CHECK = 0x56<<16, /* Descr with TCP ext */ + BMU_UDP_CHECK = 0x57<<16, /* Descr with UDP ext (YUKON only) */ + BMU_BBC = 0xffffL, /* Bit 15.. 0: Buffer Byte Counter */ +}; + +/* B2_BSC_CTRL 8 bit Blink Source Counter Control */ +enum { + BSC_START = 1<<1, /* Start Blink Source Counter */ + BSC_STOP = 1<<0, /* Stop Blink Source Counter */ +}; + +/* B2_BSC_STAT 8 bit Blink Source Counter Status */ +enum { + BSC_SRC = 1<<0, /* Blink Source, 0=Off / 1=On */ +}; + +/* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ +enum { + BSC_T_ON = 1<<2, /* Test mode on */ + BSC_T_OFF = 1<<1, /* Test mode off */ + BSC_T_STEP = 1<<0, /* Test step */ +}; + +/* B3_RAM_ADDR 32 bit RAM Address, to read or write */ + /* Bit 31..19: reserved */ +#define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ +/* RAM Interface Registers */ + +/* B3_RI_CTRL 16 bit RAM Iface Control Register */ +enum { + RI_CLR_RD_PERR = 1<<9, /* Clear IRQ RAM Read Parity Err */ + RI_CLR_WR_PERR = 1<<8, /* Clear IRQ RAM Write Parity Err*/ + + RI_RST_CLR = 1<<1, /* Clear RAM Interface Reset */ + RI_RST_SET = 1<<0, /* Set RAM Interface Reset */ +}; + +/* B3_RI_TEST 8 bit RAM Iface Test Register */ +enum { + RI_T_EV = 1<<3, /* Timeout Event occured */ + RI_T_ON = 1<<2, /* Timeout Timer Test On */ + RI_T_OFF = 1<<1, /* Timeout Timer Test Off */ + RI_T_STEP = 1<<0, /* Timeout Timer Step */ +}; + +/* MAC Arbiter Registers */ +/* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ +enum { + MA_FOE_ON = 1<<3, /* XMAC Fast Output Enable ON */ + MA_FOE_OFF = 1<<2, /* XMAC Fast Output Enable OFF */ + MA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */ + MA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */ + +}; + +/* Timeout values */ +#define SK_MAC_TO_53 72 /* MAC arbiter timeout */ +#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */ +#define SK_PKT_TO_MAX 0xffff /* Maximum value */ +#define SK_RI_TO_53 36 /* RAM interface timeout */ + + +/* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ +enum { + MA_ENA_REC_TX2 = 1<<7, /* Enable Recovery Timer TX2 */ + MA_DIS_REC_TX2 = 1<<6, /* Disable Recovery Timer TX2 */ + MA_ENA_REC_TX1 = 1<<5, /* Enable Recovery Timer TX1 */ + MA_DIS_REC_TX1 = 1<<4, /* Disable Recovery Timer TX1 */ + MA_ENA_REC_RX2 = 1<<3, /* Enable Recovery Timer RX2 */ + MA_DIS_REC_RX2 = 1<<2, /* Disable Recovery Timer RX2 */ + MA_ENA_REC_RX1 = 1<<1, /* Enable Recovery Timer RX1 */ + MA_DIS_REC_RX1 = 1<<0, /* Disable Recovery Timer RX1 */ +}; + +/* Packet Arbiter Registers */ +/* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ +enum { + PA_CLR_TO_TX2 = 1<<13, /* Clear IRQ Packet Timeout TX2 */ + PA_CLR_TO_TX1 = 1<<12, /* Clear IRQ Packet Timeout TX1 */ + PA_CLR_TO_RX2 = 1<<11, /* Clear IRQ Packet Timeout RX2 */ + PA_CLR_TO_RX1 = 1<<10, /* Clear IRQ Packet Timeout RX1 */ + PA_ENA_TO_TX2 = 1<<9, /* Enable Timeout Timer TX2 */ + PA_DIS_TO_TX2 = 1<<8, /* Disable Timeout Timer TX2 */ + PA_ENA_TO_TX1 = 1<<7, /* Enable Timeout Timer TX1 */ + PA_DIS_TO_TX1 = 1<<6, /* Disable Timeout Timer TX1 */ + PA_ENA_TO_RX2 = 1<<5, /* Enable Timeout Timer RX2 */ + PA_DIS_TO_RX2 = 1<<4, /* Disable Timeout Timer RX2 */ + PA_ENA_TO_RX1 = 1<<3, /* Enable Timeout Timer RX1 */ + PA_DIS_TO_RX1 = 1<<2, /* Disable Timeout Timer RX1 */ + PA_RST_CLR = 1<<1, /* Clear MAC Arbiter Reset */ + PA_RST_SET = 1<<0, /* Set MAC Arbiter Reset */ +}; + +#define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ + PA_ENA_TO_TX1 | PA_ENA_TO_TX2) + + +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +/* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ +/* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ +/* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ +/* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ + +#define TXA_MAX_VAL 0x00ffffffUL /* Bit 23.. 0: Max TXA Timer/Cnt Val */ + +/* TXA_CTRL 8 bit Tx Arbiter Control Register */ +enum { + TXA_ENA_FSYNC = 1<<7, /* Enable force of sync Tx queue */ + TXA_DIS_FSYNC = 1<<6, /* Disable force of sync Tx queue */ + TXA_ENA_ALLOC = 1<<5, /* Enable alloc of free bandwidth */ + TXA_DIS_ALLOC = 1<<4, /* Disable alloc of free bandwidth */ + TXA_START_RC = 1<<3, /* Start sync Rate Control */ + TXA_STOP_RC = 1<<2, /* Stop sync Rate Control */ + TXA_ENA_ARB = 1<<1, /* Enable Tx Arbiter */ + TXA_DIS_ARB = 1<<0, /* Disable Tx Arbiter */ +}; + +/* + * Bank 4 - 5 + */ +/* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ +enum { + TXA_ITI_INI = 0x0200,/* 32 bit Tx Arb Interval Timer Init Val*/ + TXA_ITI_VAL = 0x0204,/* 32 bit Tx Arb Interval Timer Value */ + TXA_LIM_INI = 0x0208,/* 32 bit Tx Arb Limit Counter Init Val */ + TXA_LIM_VAL = 0x020c,/* 32 bit Tx Arb Limit Counter Value */ + TXA_CTRL = 0x0210,/* 8 bit Tx Arbiter Control Register */ + TXA_TEST = 0x0211,/* 8 bit Tx Arbiter Test Register */ + TXA_STAT = 0x0212,/* 8 bit Tx Arbiter Status Register */ +}; + + +enum { + B6_EXT_REG = 0x0300,/* External registers (GENESIS only) */ + B7_CFG_SPC = 0x0380,/* copy of the Configuration register */ + B8_RQ1_REGS = 0x0400,/* Receive Queue 1 */ + B8_RQ2_REGS = 0x0480,/* Receive Queue 2 */ + B8_TS1_REGS = 0x0600,/* Transmit sync queue 1 */ + B8_TA1_REGS = 0x0680,/* Transmit async queue 1 */ + B8_TS2_REGS = 0x0700,/* Transmit sync queue 2 */ + B8_TA2_REGS = 0x0780,/* Transmit sync queue 2 */ + B16_RAM_REGS = 0x0800,/* RAM Buffer Registers */ +}; + +/* Queue Register Offsets, use Q_ADDR() to access */ +enum { + B8_Q_REGS = 0x0400, /* base of Queue registers */ + Q_D = 0x00, /* 8*32 bit Current Descriptor */ + Q_DA_L = 0x20, /* 32 bit Current Descriptor Address Low dWord */ + Q_DA_H = 0x24, /* 32 bit Current Descriptor Address High dWord */ + Q_AC_L = 0x28, /* 32 bit Current Address Counter Low dWord */ + Q_AC_H = 0x2c, /* 32 bit Current Address Counter High dWord */ + Q_BC = 0x30, /* 32 bit Current Byte Counter */ + Q_CSR = 0x34, /* 32 bit BMU Control/Status Register */ + Q_F = 0x38, /* 32 bit Flag Register */ + Q_T1 = 0x3c, /* 32 bit Test Register 1 */ + Q_T1_TR = 0x3c, /* 8 bit Test Register 1 Transfer SM */ + Q_T1_WR = 0x3d, /* 8 bit Test Register 1 Write Descriptor SM */ + Q_T1_RD = 0x3e, /* 8 bit Test Register 1 Read Descriptor SM */ + Q_T1_SV = 0x3f, /* 8 bit Test Register 1 Supervisor SM */ + Q_T2 = 0x40, /* 32 bit Test Register 2 */ + Q_T3 = 0x44, /* 32 bit Test Register 3 */ + +/* Yukon-2 */ + Q_DONE = 0x24, /* 16 bit Done Index (Yukon-2 only) */ + Q_WM = 0x40, /* 16 bit FIFO Watermark */ + Q_AL = 0x42, /* 8 bit FIFO Alignment */ + Q_RSP = 0x44, /* 16 bit FIFO Read Shadow Pointer */ + Q_RSL = 0x46, /* 8 bit FIFO Read Shadow Level */ + Q_RP = 0x48, /* 8 bit FIFO Read Pointer */ + Q_RL = 0x4a, /* 8 bit FIFO Read Level */ + Q_WP = 0x4c, /* 8 bit FIFO Write Pointer */ + Q_WSP = 0x4d, /* 8 bit FIFO Write Shadow Pointer */ + Q_WL = 0x4e, /* 8 bit FIFO Write Level */ + Q_WSL = 0x4f, /* 8 bit FIFO Write Shadow Level */ +}; +#define Q_ADDR(reg, offs) (B8_Q_REGS + (reg) + (offs)) + +/* RAM Buffer Register Offsets */ +enum { + + RB_START = 0x00,/* 32 bit RAM Buffer Start Address */ + RB_END = 0x04,/* 32 bit RAM Buffer End Address */ + RB_WP = 0x08,/* 32 bit RAM Buffer Write Pointer */ + RB_RP = 0x0c,/* 32 bit RAM Buffer Read Pointer */ + RB_RX_UTPP = 0x10,/* 32 bit Rx Upper Threshold, Pause Packet */ + RB_RX_LTPP = 0x14,/* 32 bit Rx Lower Threshold, Pause Packet */ + RB_RX_UTHP = 0x18,/* 32 bit Rx Upper Threshold, High Prio */ + RB_RX_LTHP = 0x1c,/* 32 bit Rx Lower Threshold, High Prio */ + /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ + RB_PC = 0x20,/* 32 bit RAM Buffer Packet Counter */ + RB_LEV = 0x24,/* 32 bit RAM Buffer Level Register */ + RB_CTRL = 0x28,/* 32 bit RAM Buffer Control Register */ + RB_TST1 = 0x29,/* 8 bit RAM Buffer Test Register 1 */ + RB_TST2 = 0x2a,/* 8 bit RAM Buffer Test Register 2 */ +}; + +/* Receive and Transmit Queues */ +enum { + Q_R1 = 0x0000, /* Receive Queue 1 */ + Q_R2 = 0x0080, /* Receive Queue 2 */ + Q_XS1 = 0x0200, /* Synchronous Transmit Queue 1 */ + Q_XA1 = 0x0280, /* Asynchronous Transmit Queue 1 */ + Q_XS2 = 0x0300, /* Synchronous Transmit Queue 2 */ + Q_XA2 = 0x0380, /* Asynchronous Transmit Queue 2 */ +}; + +/* Different MAC Types */ +enum { + SK_MAC_XMAC = 0, /* Xaqti XMAC II */ + SK_MAC_GMAC = 1, /* Marvell GMAC */ +}; + +/* Different PHY Types */ +enum { + SK_PHY_XMAC = 0,/* integrated in XMAC II */ + SK_PHY_BCOM = 1,/* Broadcom BCM5400 */ + SK_PHY_LONE = 2,/* Level One LXT1000 [not supported]*/ + SK_PHY_NAT = 3,/* National DP83891 [not supported] */ + SK_PHY_MARV_COPPER= 4,/* Marvell 88E1011S */ + SK_PHY_MARV_FIBER = 5,/* Marvell 88E1011S working on fiber */ +}; + +/* PHY addresses (bits 12..8 of PHY address reg) */ +enum { + PHY_ADDR_XMAC = 0<<8, + PHY_ADDR_BCOM = 1<<8, + PHY_ADDR_LONE = 3<<8, + PHY_ADDR_NAT = 0<<8, +/* GPHY address (bits 15..11 of SMI control reg) */ + PHY_ADDR_MARV = 0, +}; + +#define RB_ADDR(offs, queue) (B16_RAM_REGS + (queue) + (offs)) + +/* Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) */ +enum { + RX_MFF_EA = 0x0c00,/* 32 bit Receive MAC FIFO End Address */ + RX_MFF_WP = 0x0c04,/* 32 bit Receive MAC FIFO Write Pointer */ + + RX_MFF_RP = 0x0c0c,/* 32 bit Receive MAC FIFO Read Pointer */ + RX_MFF_PC = 0x0c10,/* 32 bit Receive MAC FIFO Packet Cnt */ + RX_MFF_LEV = 0x0c14,/* 32 bit Receive MAC FIFO Level */ + RX_MFF_CTRL1 = 0x0c18,/* 16 bit Receive MAC FIFO Control Reg 1*/ + RX_MFF_STAT_TO = 0x0c1a,/* 8 bit Receive MAC Status Timeout */ + RX_MFF_TIST_TO = 0x0c1b,/* 8 bit Receive MAC Time Stamp Timeout */ + RX_MFF_CTRL2 = 0x0c1c,/* 8 bit Receive MAC FIFO Control Reg 2*/ + RX_MFF_TST1 = 0x0c1d,/* 8 bit Receive MAC FIFO Test Reg 1 */ + RX_MFF_TST2 = 0x0c1e,/* 8 bit Receive MAC FIFO Test Reg 2 */ + + RX_LED_INI = 0x0c20,/* 32 bit Receive LED Cnt Init Value */ + RX_LED_VAL = 0x0c24,/* 32 bit Receive LED Cnt Current Value */ + RX_LED_CTRL = 0x0c28,/* 8 bit Receive LED Cnt Control Reg */ + RX_LED_TST = 0x0c29,/* 8 bit Receive LED Cnt Test Register */ + + LNK_SYNC_INI = 0x0c30,/* 32 bit Link Sync Cnt Init Value */ + LNK_SYNC_VAL = 0x0c34,/* 32 bit Link Sync Cnt Current Value */ + LNK_SYNC_CTRL = 0x0c38,/* 8 bit Link Sync Cnt Control Register */ + LNK_SYNC_TST = 0x0c39,/* 8 bit Link Sync Cnt Test Register */ + LNK_LED_REG = 0x0c3c,/* 8 bit Link LED Register */ +}; + +/* Receive and Transmit MAC FIFO Registers (GENESIS only) */ +/* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ +enum { + MFF_ENA_RDY_PAT = 1<<13, /* Enable Ready Patch */ + MFF_DIS_RDY_PAT = 1<<12, /* Disable Ready Patch */ + MFF_ENA_TIM_PAT = 1<<11, /* Enable Timing Patch */ + MFF_DIS_TIM_PAT = 1<<10, /* Disable Timing Patch */ + MFF_ENA_ALM_FUL = 1<<9, /* Enable AlmostFull Sign */ + MFF_DIS_ALM_FUL = 1<<8, /* Disable AlmostFull Sign */ + MFF_ENA_PAUSE = 1<<7, /* Enable Pause Signaling */ + MFF_DIS_PAUSE = 1<<6, /* Disable Pause Signaling */ + MFF_ENA_FLUSH = 1<<5, /* Enable Frame Flushing */ + MFF_DIS_FLUSH = 1<<4, /* Disable Frame Flushing */ + MFF_ENA_TIST = 1<<3, /* Enable Time Stamp Gener */ + MFF_DIS_TIST = 1<<2, /* Disable Time Stamp Gener */ + MFF_CLR_INTIST = 1<<1, /* Clear IRQ No Time Stamp */ + MFF_CLR_INSTAT = 1<<0, /* Clear IRQ No Status */ +#define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT +}; + +/* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ +enum { + MFF_CLR_PERR = 1<<15, /* Clear Parity Error IRQ */ + /* Bit 14: reserved */ + MFF_ENA_PKT_REC = 1<<13, /* Enable Packet Recovery */ + MFF_DIS_PKT_REC = 1<<12, /* Disable Packet Recovery */ + + MFF_ENA_W4E = 1<<7, /* Enable Wait for Empty */ + MFF_DIS_W4E = 1<<6, /* Disable Wait for Empty */ + + MFF_ENA_LOOPB = 1<<3, /* Enable Loopback */ + MFF_DIS_LOOPB = 1<<2, /* Disable Loopback */ + MFF_CLR_MAC_RST = 1<<1, /* Clear XMAC Reset */ + MFF_SET_MAC_RST = 1<<0, /* Set XMAC Reset */ +}; + +#define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) + +/* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ +/* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ +enum { + MFF_WSP_T_ON = 1<<6, /* Tx: Write Shadow Ptr TestOn */ + MFF_WSP_T_OFF = 1<<5, /* Tx: Write Shadow Ptr TstOff */ + MFF_WSP_INC = 1<<4, /* Tx: Write Shadow Ptr Increment */ + MFF_PC_DEC = 1<<3, /* Packet Counter Decrement */ + MFF_PC_T_ON = 1<<2, /* Packet Counter Test On */ + MFF_PC_T_OFF = 1<<1, /* Packet Counter Test Off */ + MFF_PC_INC = 1<<0, /* Packet Counter Increment */ +}; + +/* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ +/* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ +enum { + MFF_WP_T_ON = 1<<6, /* Write Pointer Test On */ + MFF_WP_T_OFF = 1<<5, /* Write Pointer Test Off */ + MFF_WP_INC = 1<<4, /* Write Pointer Increm */ + + MFF_RP_T_ON = 1<<2, /* Read Pointer Test On */ + MFF_RP_T_OFF = 1<<1, /* Read Pointer Test Off */ + MFF_RP_DEC = 1<<0, /* Read Pointer Decrement */ +}; + +/* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ +/* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ +enum { + MFF_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + MFF_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + MFF_RST_CLR = 1<<1, /* Clear MAC FIFO Reset */ + MFF_RST_SET = 1<<0, /* Set MAC FIFO Reset */ +}; + + +/* Link LED Counter Registers (GENESIS only) */ + +/* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ +/* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ +/* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ +enum { + LED_START = 1<<2, /* Start Timer */ + LED_STOP = 1<<1, /* Stop Timer */ + LED_STATE = 1<<0, /* Rx/Tx: LED State, 1=LED on */ +}; + +/* RX_LED_TST 8 bit Receive LED Cnt Test Register */ +/* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ +/* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ +enum { + LED_T_ON = 1<<2, /* LED Counter Test mode On */ + LED_T_OFF = 1<<1, /* LED Counter Test mode Off */ + LED_T_STEP = 1<<0, /* LED Counter Step */ +}; + +/* LNK_LED_REG 8 bit Link LED Register */ +enum { + LED_BLK_ON = 1<<5, /* Link LED Blinking On */ + LED_BLK_OFF = 1<<4, /* Link LED Blinking Off */ + LED_SYNC_ON = 1<<3, /* Use Sync Wire to switch LED */ + LED_SYNC_OFF = 1<<2, /* Disable Sync Wire Input */ + LED_ON = 1<<1, /* switch LED on */ + LED_OFF = 1<<0, /* switch LED off */ +}; + +/* Receive GMAC FIFO (YUKON and Yukon-2) */ +enum { + RX_GMF_EA = 0x0c40,/* 32 bit Rx GMAC FIFO End Address */ + RX_GMF_AF_THR = 0x0c44,/* 32 bit Rx GMAC FIFO Almost Full Thresh. */ + RX_GMF_CTRL_T = 0x0c48,/* 32 bit Rx GMAC FIFO Control/Test */ + RX_GMF_FL_MSK = 0x0c4c,/* 32 bit Rx GMAC FIFO Flush Mask */ + RX_GMF_FL_THR = 0x0c50,/* 32 bit Rx GMAC FIFO Flush Threshold */ + RX_GMF_TR_THR = 0x0c54,/* 32 bit Rx Truncation Threshold (Yukon-2) */ + + RX_GMF_VLAN = 0x0c5c,/* 32 bit Rx VLAN Type Register (Yukon-2) */ + RX_GMF_WP = 0x0c60,/* 32 bit Rx GMAC FIFO Write Pointer */ + + RX_GMF_WLEV = 0x0c68,/* 32 bit Rx GMAC FIFO Write Level */ + + RX_GMF_RP = 0x0c70,/* 32 bit Rx GMAC FIFO Read Pointer */ + + RX_GMF_RLEV = 0x0c78,/* 32 bit Rx GMAC FIFO Read Level */ +}; + + +/* TXA_TEST 8 bit Tx Arbiter Test Register */ +enum { + TXA_INT_T_ON = 1<<5, /* Tx Arb Interval Timer Test On */ + TXA_INT_T_OFF = 1<<4, /* Tx Arb Interval Timer Test Off */ + TXA_INT_T_STEP = 1<<3, /* Tx Arb Interval Timer Step */ + TXA_LIM_T_ON = 1<<2, /* Tx Arb Limit Timer Test On */ + TXA_LIM_T_OFF = 1<<1, /* Tx Arb Limit Timer Test Off */ + TXA_LIM_T_STEP = 1<<0, /* Tx Arb Limit Timer Step */ +}; + +/* TXA_STAT 8 bit Tx Arbiter Status Register */ +enum { + TXA_PRIO_XS = 1<<0, /* sync queue has prio to send */ +}; + + +/* Q_BC 32 bit Current Byte Counter */ + +/* BMU Control Status Registers */ +/* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ +/* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ +/* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ +/* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ +/* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ +/* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ +/* Q_CSR 32 bit BMU Control/Status Register */ + +enum { + CSR_SV_IDLE = 1<<24, /* BMU SM Idle */ + + CSR_DESC_CLR = 1<<21, /* Clear Reset for Descr */ + CSR_DESC_SET = 1<<20, /* Set Reset for Descr */ + CSR_FIFO_CLR = 1<<19, /* Clear Reset for FIFO */ + CSR_FIFO_SET = 1<<18, /* Set Reset for FIFO */ + CSR_HPI_RUN = 1<<17, /* Release HPI SM */ + CSR_HPI_RST = 1<<16, /* Reset HPI SM to Idle */ + CSR_SV_RUN = 1<<15, /* Release Supervisor SM */ + CSR_SV_RST = 1<<14, /* Reset Supervisor SM */ + CSR_DREAD_RUN = 1<<13, /* Release Descr Read SM */ + CSR_DREAD_RST = 1<<12, /* Reset Descr Read SM */ + CSR_DWRITE_RUN = 1<<11, /* Release Descr Write SM */ + CSR_DWRITE_RST = 1<<10, /* Reset Descr Write SM */ + CSR_TRANS_RUN = 1<<9, /* Release Transfer SM */ + CSR_TRANS_RST = 1<<8, /* Reset Transfer SM */ + CSR_ENA_POL = 1<<7, /* Enable Descr Polling */ + CSR_DIS_POL = 1<<6, /* Disable Descr Polling */ + CSR_STOP = 1<<5, /* Stop Rx/Tx Queue */ + CSR_START = 1<<4, /* Start Rx/Tx Queue */ + CSR_IRQ_CL_P = 1<<3, /* (Rx) Clear Parity IRQ */ + CSR_IRQ_CL_B = 1<<2, /* Clear EOB IRQ */ + CSR_IRQ_CL_F = 1<<1, /* Clear EOF IRQ */ + CSR_IRQ_CL_C = 1<<0, /* Clear ERR IRQ */ +}; + +#define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ + CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ + CSR_TRANS_RST) +#define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ + CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ + CSR_TRANS_RUN) + +/* Q_F 32 bit Flag Register */ +enum { + F_ALM_FULL = 1<<27, /* Rx FIFO: almost full */ + F_EMPTY = 1<<27, /* Tx FIFO: empty flag */ + F_FIFO_EOF = 1<<26, /* Tag (EOF Flag) bit in FIFO */ + F_WM_REACHED = 1<<25, /* Watermark reached */ + + F_FIFO_LEVEL = 0x1fL<<16, /* Bit 23..16: # of Qwords in FIFO */ + F_WATER_MARK = 0x0007ffL, /* Bit 10.. 0: Watermark */ +}; + +/* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ +/* RB_START 32 bit RAM Buffer Start Address */ +/* RB_END 32 bit RAM Buffer End Address */ +/* RB_WP 32 bit RAM Buffer Write Pointer */ +/* RB_RP 32 bit RAM Buffer Read Pointer */ +/* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ +/* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ +/* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ +/* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ +/* RB_PC 32 bit RAM Buffer Packet Counter */ +/* RB_LEV 32 bit RAM Buffer Level Register */ + +#define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ +/* RB_TST2 8 bit RAM Buffer Test Register 2 */ +/* RB_TST1 8 bit RAM Buffer Test Register 1 */ + +/* RB_CTRL 8 bit RAM Buffer Control Register */ +enum { + RB_ENA_STFWD = 1<<5, /* Enable Store & Forward */ + RB_DIS_STFWD = 1<<4, /* Disable Store & Forward */ + RB_ENA_OP_MD = 1<<3, /* Enable Operation Mode */ + RB_DIS_OP_MD = 1<<2, /* Disable Operation Mode */ + RB_RST_CLR = 1<<1, /* Clear RAM Buf STM Reset */ + RB_RST_SET = 1<<0, /* Set RAM Buf STM Reset */ +}; + +/* Transmit MAC FIFO and Transmit LED Registers (GENESIS only), */ +enum { + TX_MFF_EA = 0x0d00,/* 32 bit Transmit MAC FIFO End Address */ + TX_MFF_WP = 0x0d04,/* 32 bit Transmit MAC FIFO WR Pointer */ + TX_MFF_WSP = 0x0d08,/* 32 bit Transmit MAC FIFO WR Shadow Ptr */ + TX_MFF_RP = 0x0d0c,/* 32 bit Transmit MAC FIFO RD Pointer */ + TX_MFF_PC = 0x0d10,/* 32 bit Transmit MAC FIFO Packet Cnt */ + TX_MFF_LEV = 0x0d14,/* 32 bit Transmit MAC FIFO Level */ + TX_MFF_CTRL1 = 0x0d18,/* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ + TX_MFF_WAF = 0x0d1a,/* 8 bit Transmit MAC Wait after flush */ + + TX_MFF_CTRL2 = 0x0d1c,/* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ + TX_MFF_TST1 = 0x0d1d,/* 8 bit Transmit MAC FIFO Test Reg 1 */ + TX_MFF_TST2 = 0x0d1e,/* 8 bit Transmit MAC FIFO Test Reg 2 */ + + TX_LED_INI = 0x0d20,/* 32 bit Transmit LED Cnt Init Value */ + TX_LED_VAL = 0x0d24,/* 32 bit Transmit LED Cnt Current Val */ + TX_LED_CTRL = 0x0d28,/* 8 bit Transmit LED Cnt Control Reg */ + TX_LED_TST = 0x0d29,/* 8 bit Transmit LED Cnt Test Reg */ +}; + +/* Counter and Timer constants, for a host clock of 62.5 MHz */ +#define SK_XMIT_DUR 0x002faf08UL /* 50 ms */ +#define SK_BLK_DUR 0x01dcd650UL /* 500 ms */ + +#define SK_DPOLL_DEF 0x00ee6b28UL /* 250 ms at 62.5 MHz */ + +#define SK_DPOLL_MAX 0x00ffffffUL /* 268 ms at 62.5 MHz */ + /* 215 ms at 78.12 MHz */ + +#define SK_FACT_62 100 /* is given in percent */ +#define SK_FACT_53 85 /* on GENESIS: 53.12 MHz */ +#define SK_FACT_78 125 /* on YUKON: 78.12 MHz */ + + +/* Transmit GMAC FIFO (YUKON only) */ +enum { + TX_GMF_EA = 0x0d40,/* 32 bit Tx GMAC FIFO End Address */ + TX_GMF_AE_THR = 0x0d44,/* 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ + TX_GMF_CTRL_T = 0x0d48,/* 32 bit Tx GMAC FIFO Control/Test */ + + TX_GMF_WP = 0x0d60,/* 32 bit Tx GMAC FIFO Write Pointer */ + TX_GMF_WSP = 0x0d64,/* 32 bit Tx GMAC FIFO Write Shadow Ptr. */ + TX_GMF_WLEV = 0x0d68,/* 32 bit Tx GMAC FIFO Write Level */ + + TX_GMF_RP = 0x0d70,/* 32 bit Tx GMAC FIFO Read Pointer */ + TX_GMF_RSTP = 0x0d74,/* 32 bit Tx GMAC FIFO Restart Pointer */ + TX_GMF_RLEV = 0x0d78,/* 32 bit Tx GMAC FIFO Read Level */ + + /* Descriptor Poll Timer Registers */ + B28_DPT_INI = 0x0e00,/* 24 bit Descriptor Poll Timer Init Val */ + B28_DPT_VAL = 0x0e04,/* 24 bit Descriptor Poll Timer Curr Val */ + B28_DPT_CTRL = 0x0e08,/* 8 bit Descriptor Poll Timer Ctrl Reg */ + + B28_DPT_TST = 0x0e0a,/* 8 bit Descriptor Poll Timer Test Reg */ + + /* Time Stamp Timer Registers (YUKON only) */ + GMAC_TI_ST_VAL = 0x0e14,/* 32 bit Time Stamp Timer Curr Val */ + GMAC_TI_ST_CTRL = 0x0e18,/* 8 bit Time Stamp Timer Ctrl Reg */ + GMAC_TI_ST_TST = 0x0e1a,/* 8 bit Time Stamp Timer Test Reg */ +}; + +/* Status BMU Registers (Yukon-2 only)*/ +enum { + STAT_CTRL = 0x0e80,/* 32 bit Status BMU Control Reg */ + STAT_LAST_IDX = 0x0e84,/* 16 bit Status BMU Last Index */ + /* 0x0e85 - 0x0e86: reserved */ + STAT_LIST_ADDR_LO = 0x0e88,/* 32 bit Status List Start Addr (low) */ + STAT_LIST_ADDR_HI = 0x0e8c,/* 32 bit Status List Start Addr (high) */ + STAT_TXA1_RIDX = 0x0e90,/* 16 bit Status TxA1 Report Index Reg */ + STAT_TXS1_RIDX = 0x0e92,/* 16 bit Status TxS1 Report Index Reg */ + STAT_TXA2_RIDX = 0x0e94,/* 16 bit Status TxA2 Report Index Reg */ + STAT_TXS2_RIDX = 0x0e96,/* 16 bit Status TxS2 Report Index Reg */ + STAT_TX_IDX_TH = 0x0e98,/* 16 bit Status Tx Index Threshold Reg */ + STAT_PUT_IDX = 0x0e9c,/* 16 bit Status Put Index Reg */ + +/* FIFO Control/Status Registers (Yukon-2 only)*/ + STAT_FIFO_WP = 0x0ea0,/* 8 bit Status FIFO Write Pointer Reg */ + STAT_FIFO_RP = 0x0ea4,/* 8 bit Status FIFO Read Pointer Reg */ + STAT_FIFO_RSP = 0x0ea6,/* 8 bit Status FIFO Read Shadow Ptr */ + STAT_FIFO_LEVEL = 0x0ea8,/* 8 bit Status FIFO Level Reg */ + STAT_FIFO_SHLVL = 0x0eaa,/* 8 bit Status FIFO Shadow Level Reg */ + STAT_FIFO_WM = 0x0eac,/* 8 bit Status FIFO Watermark Reg */ + STAT_FIFO_ISR_WM = 0x0ead,/* 8 bit Status FIFO ISR Watermark Reg */ + +/* Level and ISR Timer Registers (Yukon-2 only)*/ + STAT_LEV_TIMER_INI = 0x0eb0,/* 32 bit Level Timer Init. Value Reg */ + STAT_LEV_TIMER_CNT = 0x0eb4,/* 32 bit Level Timer Counter Reg */ + STAT_LEV_TIMER_CTRL = 0x0eb8,/* 8 bit Level Timer Control Reg */ + STAT_LEV_TIMER_TEST = 0x0eb9,/* 8 bit Level Timer Test Reg */ + STAT_TX_TIMER_INI = 0x0ec0,/* 32 bit Tx Timer Init. Value Reg */ + STAT_TX_TIMER_CNT = 0x0ec4,/* 32 bit Tx Timer Counter Reg */ + STAT_TX_TIMER_CTRL = 0x0ec8,/* 8 bit Tx Timer Control Reg */ + STAT_TX_TIMER_TEST = 0x0ec9,/* 8 bit Tx Timer Test Reg */ + STAT_ISR_TIMER_INI = 0x0ed0,/* 32 bit ISR Timer Init. Value Reg */ + STAT_ISR_TIMER_CNT = 0x0ed4,/* 32 bit ISR Timer Counter Reg */ + STAT_ISR_TIMER_CTRL = 0x0ed8,/* 8 bit ISR Timer Control Reg */ + STAT_ISR_TIMER_TEST = 0x0ed9,/* 8 bit ISR Timer Test Reg */ + + ST_LAST_IDX_MASK = 0x007f,/* Last Index Mask */ + ST_TXRP_IDX_MASK = 0x0fff,/* Tx Report Index Mask */ + ST_TXTH_IDX_MASK = 0x0fff,/* Tx Threshold Index Mask */ + ST_WM_IDX_MASK = 0x3f,/* FIFO Watermark Index Mask */ +}; + +enum { + LINKLED_OFF = 0x01, + LINKLED_ON = 0x02, + LINKLED_LINKSYNC_OFF = 0x04, + LINKLED_LINKSYNC_ON = 0x08, + LINKLED_BLINK_OFF = 0x10, + LINKLED_BLINK_ON = 0x20, +}; + +/* GMAC and GPHY Control Registers (YUKON only) */ +enum { + GMAC_CTRL = 0x0f00,/* 32 bit GMAC Control Reg */ + GPHY_CTRL = 0x0f04,/* 32 bit GPHY Control Reg */ + GMAC_IRQ_SRC = 0x0f08,/* 8 bit GMAC Interrupt Source Reg */ + GMAC_IRQ_MSK = 0x0f0c,/* 8 bit GMAC Interrupt Mask Reg */ + GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */ + +/* Wake-up Frame Pattern Match Control Registers (YUKON only) */ + + WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */ + + WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */ + WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */ + WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */ + WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */ + WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */ + WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */ + WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */ + +/* WOL Pattern Length Registers (YUKON only) */ + + WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */ + WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */ + +/* WOL Pattern Counter Registers (YUKON only) */ + + WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */ + WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */ +}; + +enum { + WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */ + WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */ +}; + +enum { + BASE_XMAC_1 = 0x2000,/* XMAC 1 registers */ + BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */ + BASE_XMAC_2 = 0x3000,/* XMAC 2 registers */ + BASE_GMAC_2 = 0x3800,/* GMAC 2 registers */ +}; + +/* + * Receive Frame Status Encoding + */ +enum { + XMR_FS_LEN = 0x3fff<<18, /* Bit 31..18: Rx Frame Length */ + XMR_FS_2L_VLAN = 1<<17, /* Bit 17: tagged wh 2Lev VLAN ID*/ + XMR_FS_1_VLAN = 1<<16, /* Bit 16: tagged wh 1ev VLAN ID*/ + XMR_FS_BC = 1<<15, /* Bit 15: Broadcast Frame */ + XMR_FS_MC = 1<<14, /* Bit 14: Multicast Frame */ + XMR_FS_UC = 1<<13, /* Bit 13: Unicast Frame */ + + XMR_FS_BURST = 1<<11, /* Bit 11: Burst Mode */ + XMR_FS_CEX_ERR = 1<<10, /* Bit 10: Carrier Ext. Error */ + XMR_FS_802_3 = 1<<9, /* Bit 9: 802.3 Frame */ + XMR_FS_COL_ERR = 1<<8, /* Bit 8: Collision Error */ + XMR_FS_CAR_ERR = 1<<7, /* Bit 7: Carrier Event Error */ + XMR_FS_LEN_ERR = 1<<6, /* Bit 6: In-Range Length Error */ + XMR_FS_FRA_ERR = 1<<5, /* Bit 5: Framing Error */ + XMR_FS_RUNT = 1<<4, /* Bit 4: Runt Frame */ + XMR_FS_LNG_ERR = 1<<3, /* Bit 3: Giant (Jumbo) Frame */ + XMR_FS_FCS_ERR = 1<<2, /* Bit 2: Frame Check Sequ Err */ + XMR_FS_ERR = 1<<1, /* Bit 1: Frame Error */ + XMR_FS_MCTRL = 1<<0, /* Bit 0: MAC Control Packet */ + +/* + * XMR_FS_ERR will be set if + * XMR_FS_FCS_ERR, XMR_FS_LNG_ERR, XMR_FS_RUNT, + * XMR_FS_FRA_ERR, XMR_FS_LEN_ERR, or XMR_FS_CEX_ERR + * is set. XMR_FS_LNG_ERR and XMR_FS_LEN_ERR will issue + * XMR_FS_ERR unless the corresponding bit in the Receive Command + * Register is set. + */ +}; + +/* +,* XMAC-PHY Registers, indirect addressed over the XMAC + */ +enum { + PHY_XMAC_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_XMAC_STAT = 0x01,/* 16 bit r/w PHY Status Register */ + PHY_XMAC_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_XMAC_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_XMAC_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_XMAC_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Abi Reg */ + PHY_XMAC_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_XMAC_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_XMAC_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + + PHY_XMAC_EXT_STAT = 0x0f,/* 16 bit r/o Ext Status Register */ + PHY_XMAC_RES_ABI = 0x10,/* 16 bit r/o PHY Resolved Ability */ +}; +/* + * Broadcom-PHY Registers, indirect addressed over XMAC + */ +enum { + PHY_BCOM_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_BCOM_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_BCOM_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_BCOM_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_BCOM_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_BCOM_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_BCOM_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_BCOM_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_BCOM_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Broadcom-specific registers */ + PHY_BCOM_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_BCOM_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_BCOM_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_BCOM_P_EXT_CTRL = 0x10,/* 16 bit r/w PHY Extended Ctrl Reg */ + PHY_BCOM_P_EXT_STAT = 0x11,/* 16 bit r/o PHY Extended Stat Reg */ + PHY_BCOM_RE_CTR = 0x12,/* 16 bit r/w Receive Error Counter */ + PHY_BCOM_FC_CTR = 0x13,/* 16 bit r/w False Carrier Sense Cnt */ + PHY_BCOM_RNO_CTR = 0x14,/* 16 bit r/w Receiver NOT_OK Cnt */ + + PHY_BCOM_AUX_CTRL = 0x18,/* 16 bit r/w Auxiliary Control Reg */ + PHY_BCOM_AUX_STAT = 0x19,/* 16 bit r/o Auxiliary Stat Summary */ + PHY_BCOM_INT_STAT = 0x1a,/* 16 bit r/o Interrupt Status Reg */ + PHY_BCOM_INT_MASK = 0x1b,/* 16 bit r/w Interrupt Mask Reg */ +}; + +/* + * Marvel-PHY Registers, indirect addressed over GMAC + */ +enum { + PHY_MARV_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_MARV_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_MARV_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_MARV_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_MARV_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_MARV_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_MARV_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_MARV_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_MARV_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Marvel-specific registers */ + PHY_MARV_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_MARV_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_MARV_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_MARV_PHY_CTRL = 0x10,/* 16 bit r/w PHY Specific Ctrl Reg */ + PHY_MARV_PHY_STAT = 0x11,/* 16 bit r/o PHY Specific Stat Reg */ + PHY_MARV_INT_MASK = 0x12,/* 16 bit r/w Interrupt Mask Reg */ + PHY_MARV_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_MARV_EXT_CTRL = 0x14,/* 16 bit r/w Ext. PHY Specific Ctrl */ + PHY_MARV_RXE_CNT = 0x15,/* 16 bit r/w Receive Error Counter */ + PHY_MARV_EXT_ADR = 0x16,/* 16 bit r/w Ext. Ad. for Cable Diag. */ + PHY_MARV_PORT_IRQ = 0x17,/* 16 bit r/o Port 0 IRQ (88E1111 only) */ + PHY_MARV_LED_CTRL = 0x18,/* 16 bit r/w LED Control Reg */ + PHY_MARV_LED_OVER = 0x19,/* 16 bit r/w Manual LED Override Reg */ + PHY_MARV_EXT_CTRL_2 = 0x1a,/* 16 bit r/w Ext. PHY Specific Ctrl 2 */ + PHY_MARV_EXT_P_STAT = 0x1b,/* 16 bit r/w Ext. PHY Spec. Stat Reg */ + PHY_MARV_CABLE_DIAG = 0x1c,/* 16 bit r/o Cable Diagnostic Reg */ + PHY_MARV_PAGE_ADDR = 0x1d,/* 16 bit r/w Extended Page Address Reg */ + PHY_MARV_PAGE_DATA = 0x1e,/* 16 bit r/w Extended Page Data Reg */ + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ + PHY_MARV_FE_LED_PAR = 0x16,/* 16 bit r/w LED Parallel Select Reg. */ + PHY_MARV_FE_LED_SER = 0x17,/* 16 bit r/w LED Stream Select S. LED */ + PHY_MARV_FE_VCT_TX = 0x1a,/* 16 bit r/w VCT Reg. for TXP/N Pins */ + PHY_MARV_FE_VCT_RX = 0x1b,/* 16 bit r/o VCT Reg. for RXP/N Pins */ + PHY_MARV_FE_SPEC_2 = 0x1c,/* 16 bit r/w Specific Control Reg. 2 */ +}; + +/* Level One-PHY Registers, indirect addressed over XMAC */ +enum { + PHY_LONE_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_LONE_STAT = 0x01,/* 16 bit r/o PHY Status Register */ + PHY_LONE_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_LONE_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_LONE_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_LONE_AUNE_LP = 0x05,/* 16 bit r/o Link Part Ability Reg */ + PHY_LONE_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_LONE_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_LONE_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner */ + /* Level One-specific registers */ + PHY_LONE_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_LONE_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_LONE_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Reg */ + PHY_LONE_PORT_CFG = 0x10,/* 16 bit r/w Port Configuration Reg*/ + PHY_LONE_Q_STAT = 0x11,/* 16 bit r/o Quick Status Reg */ + PHY_LONE_INT_ENAB = 0x12,/* 16 bit r/w Interrupt Enable Reg */ + PHY_LONE_INT_STAT = 0x13,/* 16 bit r/o Interrupt Status Reg */ + PHY_LONE_LED_CFG = 0x14,/* 16 bit r/w LED Configuration Reg */ + PHY_LONE_PORT_CTRL = 0x15,/* 16 bit r/w Port Control Reg */ + PHY_LONE_CIM = 0x16,/* 16 bit r/o CIM Reg */ +}; + +/* National-PHY Registers, indirect addressed over XMAC */ +enum { + PHY_NAT_CTRL = 0x00,/* 16 bit r/w PHY Control Register */ + PHY_NAT_STAT = 0x01,/* 16 bit r/w PHY Status Register */ + PHY_NAT_ID0 = 0x02,/* 16 bit r/o PHY ID0 Register */ + PHY_NAT_ID1 = 0x03,/* 16 bit r/o PHY ID1 Register */ + PHY_NAT_AUNE_ADV = 0x04,/* 16 bit r/w Auto-Neg. Advertisement */ + PHY_NAT_AUNE_LP = 0x05,/* 16 bit r/o Link Partner Ability Reg */ + PHY_NAT_AUNE_EXP = 0x06,/* 16 bit r/o Auto-Neg. Expansion Reg */ + PHY_NAT_NEPG = 0x07,/* 16 bit r/w Next Page Register */ + PHY_NAT_NEPG_LP = 0x08,/* 16 bit r/o Next Page Link Partner Reg */ + /* National-specific registers */ + PHY_NAT_1000T_CTRL = 0x09,/* 16 bit r/w 1000Base-T Control Reg */ + PHY_NAT_1000T_STAT = 0x0a,/* 16 bit r/o 1000Base-T Status Reg */ + PHY_NAT_EXT_STAT = 0x0f,/* 16 bit r/o Extended Status Register */ + PHY_NAT_EXT_CTRL1 = 0x10,/* 16 bit r/o Extended Control Reg1 */ + PHY_NAT_Q_STAT1 = 0x11,/* 16 bit r/o Quick Status Reg1 */ + PHY_NAT_10B_OP = 0x12,/* 16 bit r/o 10Base-T Operations Reg */ + PHY_NAT_EXT_CTRL2 = 0x13,/* 16 bit r/o Extended Control Reg1 */ + PHY_NAT_Q_STAT2 = 0x14,/* 16 bit r/o Quick Status Reg2 */ + + PHY_NAT_PHY_ADDR = 0x19,/* 16 bit r/o PHY Address Register */ +}; + +enum { + PHY_CT_RESET = 1<<15, /* Bit 15: (sc) clear all PHY related regs */ + PHY_CT_LOOP = 1<<14, /* Bit 14: enable Loopback over PHY */ + PHY_CT_SPS_LSB = 1<<13, /* Bit 13: Speed select, lower bit */ + PHY_CT_ANE = 1<<12, /* Bit 12: Auto-Negotiation Enabled */ + PHY_CT_PDOWN = 1<<11, /* Bit 11: Power Down Mode */ + PHY_CT_ISOL = 1<<10, /* Bit 10: Isolate Mode */ + PHY_CT_RE_CFG = 1<<9, /* Bit 9: (sc) Restart Auto-Negotiation */ + PHY_CT_DUP_MD = 1<<8, /* Bit 8: Duplex Mode */ + PHY_CT_COL_TST = 1<<7, /* Bit 7: Collision Test enabled */ + PHY_CT_SPS_MSB = 1<<6, /* Bit 6: Speed select, upper bit */ +}; + +enum { + PHY_CT_SP1000 = PHY_CT_SPS_MSB, /* enable speed of 1000 Mbps */ + PHY_CT_SP100 = PHY_CT_SPS_LSB, /* enable speed of 100 Mbps */ + PHY_CT_SP10 = 0, /* enable speed of 10 Mbps */ +}; + +enum { + PHY_ST_EXT_ST = 1<<8, /* Bit 8: Extended Status Present */ + + PHY_ST_PRE_SUP = 1<<6, /* Bit 6: Preamble Suppression */ + PHY_ST_AN_OVER = 1<<5, /* Bit 5: Auto-Negotiation Over */ + PHY_ST_REM_FLT = 1<<4, /* Bit 4: Remote Fault Condition Occured */ + PHY_ST_AN_CAP = 1<<3, /* Bit 3: Auto-Negotiation Capability */ + PHY_ST_LSYNC = 1<<2, /* Bit 2: Link Synchronized */ + PHY_ST_JAB_DET = 1<<1, /* Bit 1: Jabber Detected */ + PHY_ST_EXT_REG = 1<<0, /* Bit 0: Extended Register available */ +}; + +enum { + PHY_I1_OUI_MSK = 0x3f<<10, /* Bit 15..10: Organization Unique ID */ + PHY_I1_MOD_NUM = 0x3f<<4, /* Bit 9.. 4: Model Number */ + PHY_I1_REV_MSK = 0xf, /* Bit 3.. 0: Revision Number */ +}; + +/* different Broadcom PHY Ids */ +enum { + PHY_BCOM_ID1_A1 = 0x6041, + PHY_BCOM_ID1_B2 = 0x6043, + PHY_BCOM_ID1_C0 = 0x6044, + PHY_BCOM_ID1_C5 = 0x6047, +}; + +/* different Marvell PHY Ids */ +enum { + PHY_MARV_ID0_VAL= 0x0141, /* Marvell Unique Identifier */ + PHY_MARV_ID1_B0 = 0x0C23, /* Yukon (PHY 88E1011) */ + PHY_MARV_ID1_B2 = 0x0C25, /* Yukon-Plus (PHY 88E1011) */ + PHY_MARV_ID1_C2 = 0x0CC2, /* Yukon-EC (PHY 88E1111) */ + PHY_MARV_ID1_Y2 = 0x0C91, /* Yukon-2 (PHY 88E1112) */ +}; + +enum { + PHY_AN_NXT_PG = 1<<15, /* Bit 15: Request Next Page */ + PHY_X_AN_ACK = 1<<14, /* Bit 14: (ro) Acknowledge Received */ + PHY_X_AN_RFB = 3<<12,/* Bit 13..12: Remote Fault Bits */ + + PHY_X_AN_PAUSE = 3<<7,/* Bit 8.. 7: Pause Bits */ + PHY_X_AN_HD = 1<<6, /* Bit 6: Half Duplex */ + PHY_X_AN_FD = 1<<5, /* Bit 5: Full Duplex */ +}; + +enum { + PHY_B_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + + PHY_B_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ + PHY_B_AN_PC = 1<<10, /* Bit 10: Pause Capable */ + PHY_B_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +enum { + PHY_L_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + /* Bit 12: reserved */ + PHY_L_AN_ASP = 1<<11, /* Bit 11: Asymmetric Pause */ + PHY_L_AN_PC = 1<<10, /* Bit 10: Pause Capable */ + + PHY_L_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +/* PHY_NAT_AUNE_ADV 16 bit r/w Auto-Negotiation Advertisement */ +/* PHY_NAT_AUNE_LP 16 bit r/o Link Partner Ability Reg *****/ +/* PHY_AN_NXT_PG (see XMAC) Bit 15: Request Next Page */ +enum { + PHY_N_AN_RF = 1<<13, /* Bit 13: Remote Fault */ + + PHY_N_AN_100F = 1<<11, /* Bit 11: 100Base-T2 FD Support */ + PHY_N_AN_100H = 1<<10, /* Bit 10: 100Base-T2 HD Support */ + + PHY_N_AN_SEL = 0x1f, /* Bit 4..0: Selector Field, 00001=Ethernet*/ +}; + +/* field type definition for PHY_x_AN_SEL */ +enum { + PHY_SEL_TYPE = 1, /* 00001 = Ethernet */ +}; + +enum { + PHY_ANE_LP_NP = 1<<3, /* Bit 3: Link Partner can Next Page */ + PHY_ANE_LOC_NP = 1<<2, /* Bit 2: Local PHY can Next Page */ + PHY_ANE_RX_PG = 1<<1, /* Bit 1: Page Received */ +}; + +enum { + PHY_ANE_PAR_DF = 1<<4, /* Bit 4: Parallel Detection Fault */ + + PHY_ANE_LP_CAP = 1<<0, /* Bit 0: Link Partner Auto-Neg. Cap. */ +}; + +enum { + PHY_NP_MORE = 1<<15, /* Bit 15: More, Next Pages to follow */ + PHY_NP_ACK1 = 1<<14, /* Bit 14: (ro) Ack1, for receiving a message */ + PHY_NP_MSG_VAL = 1<<13, /* Bit 13: Message Page valid */ + PHY_NP_ACK2 = 1<<12, /* Bit 12: Ack2, comply with msg content */ + PHY_NP_TOG = 1<<11, /* Bit 11: Toggle Bit, ensure sync */ + PHY_NP_MSG = 0x07ff, /* Bit 10..0: Message from/to Link Partner */ +}; + +enum { + PHY_X_EX_FD = 1<<15, /* Bit 15: Device Supports Full Duplex */ + PHY_X_EX_HD = 1<<14, /* Bit 14: Device Supports Half Duplex */ +}; + +enum { + PHY_X_RS_PAUSE = 3<<7,/* Bit 8..7: selected Pause Mode */ + PHY_X_RS_HD = 1<<6, /* Bit 6: Half Duplex Mode selected */ + PHY_X_RS_FD = 1<<5, /* Bit 5: Full Duplex Mode selected */ + PHY_X_RS_ABLMIS = 1<<4, /* Bit 4: duplex or pause cap mismatch */ + PHY_X_RS_PAUMIS = 1<<3, /* Bit 3: pause capability mismatch */ +}; + +/** Remote Fault Bits (PHY_X_AN_RFB) encoding */ +enum { + X_RFB_OK = 0<<12,/* Bit 13..12 No errors, Link OK */ + X_RFB_LF = 1<<12, /* Bit 13..12 Link Failure */ + X_RFB_OFF = 2<<12,/* Bit 13..12 Offline */ + X_RFB_AN_ERR = 3<<12,/* Bit 13..12 Auto-Negotiation Error */ +}; + +/* Pause Bits (PHY_X_AN_PAUSE and PHY_X_RS_PAUSE) encoding */ +enum { + PHY_X_P_NO_PAUSE = 0<<7,/* Bit 8..7: no Pause Mode */ + PHY_X_P_SYM_MD = 1<<7, /* Bit 8..7: symmetric Pause Mode */ + PHY_X_P_ASYM_MD = 2<<7,/* Bit 8..7: asymmetric Pause Mode */ + PHY_X_P_BOTH_MD = 3<<7,/* Bit 8..7: both Pause Mode */ +}; + + +/* Broadcom-Specific */ +/***** PHY_BCOM_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_B_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_B_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_B_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_B_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_B_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_B_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ +}; + +/***** PHY_BCOM_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +/***** PHY_MARV_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_B_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_B_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_B_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_B_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_B_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_B_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + /* Bit 9..8: reserved */ + PHY_B_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/***** PHY_BCOM_EXT_STAT 16 bit r/o Extended Status Register *****/ +enum { + PHY_B_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_B_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_B_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_B_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/***** PHY_BCOM_P_EXT_CTRL 16 bit r/w PHY Extended Control Reg *****/ +enum { + PHY_B_PEC_MAC_PHY = 1<<15, /* Bit 15: 10BIT/GMI-Interface */ + PHY_B_PEC_DIS_CROSS = 1<<14, /* Bit 14: Disable MDI Crossover */ + PHY_B_PEC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ + PHY_B_PEC_INT_DIS = 1<<12, /* Bit 12: Interrupts Disabled */ + PHY_B_PEC_F_INT = 1<<11, /* Bit 11: Force Interrupt */ + PHY_B_PEC_BY_45 = 1<<10, /* Bit 10: Bypass 4B5B-Decoder */ + PHY_B_PEC_BY_SCR = 1<<9, /* Bit 9: Bypass Scrambler */ + PHY_B_PEC_BY_MLT3 = 1<<8, /* Bit 8: Bypass MLT3 Encoder */ + PHY_B_PEC_BY_RXA = 1<<7, /* Bit 7: Bypass Rx Alignm. */ + PHY_B_PEC_RES_SCR = 1<<6, /* Bit 6: Reset Scrambler */ + PHY_B_PEC_EN_LTR = 1<<5, /* Bit 5: Ena LED Traffic Mode */ + PHY_B_PEC_LED_ON = 1<<4, /* Bit 4: Force LED's on */ + PHY_B_PEC_LED_OFF = 1<<3, /* Bit 3: Force LED's off */ + PHY_B_PEC_EX_IPG = 1<<2, /* Bit 2: Extend Tx IPG Mode */ + PHY_B_PEC_3_LED = 1<<1, /* Bit 1: Three Link LED mode */ + PHY_B_PEC_HIGH_LA = 1<<0, /* Bit 0: GMII FIFO Elasticy */ +}; + +/***** PHY_BCOM_P_EXT_STAT 16 bit r/o PHY Extended Status Reg *****/ +enum { + PHY_B_PES_CROSS_STAT = 1<<13, /* Bit 13: MDI Crossover Status */ + PHY_B_PES_INT_STAT = 1<<12, /* Bit 12: Interrupt Status */ + PHY_B_PES_RRS = 1<<11, /* Bit 11: Remote Receiver Stat. */ + PHY_B_PES_LRS = 1<<10, /* Bit 10: Local Receiver Stat. */ + PHY_B_PES_LOCKED = 1<<9, /* Bit 9: Locked */ + PHY_B_PES_LS = 1<<8, /* Bit 8: Link Status */ + PHY_B_PES_RF = 1<<7, /* Bit 7: Remote Fault */ + PHY_B_PES_CE_ER = 1<<6, /* Bit 6: Carrier Ext Error */ + PHY_B_PES_BAD_SSD = 1<<5, /* Bit 5: Bad SSD */ + PHY_B_PES_BAD_ESD = 1<<4, /* Bit 4: Bad ESD */ + PHY_B_PES_RX_ER = 1<<3, /* Bit 3: Receive Error */ + PHY_B_PES_TX_ER = 1<<2, /* Bit 2: Transmit Error */ + PHY_B_PES_LOCK_ER = 1<<1, /* Bit 1: Lock Error */ + PHY_B_PES_MLT3_ER = 1<<0, /* Bit 0: MLT3 code Error */ +}; + +/***** PHY_BCOM_FC_CTR 16 bit r/w False Carrier Counter *****/ +enum { + PHY_B_FC_CTR = 0xff, /* Bit 7..0: False Carrier Counter */ + +/***** PHY_BCOM_RNO_CTR 16 bit r/w Receive NOT_OK Counter *****/ + PHY_B_RC_LOC_MSK = 0xff00, /* Bit 15..8: Local Rx NOT_OK cnt */ + PHY_B_RC_REM_MSK = 0x00ff, /* Bit 7..0: Remote Rx NOT_OK cnt */ + +/***** PHY_BCOM_AUX_CTRL 16 bit r/w Auxiliary Control Reg *****/ + PHY_B_AC_L_SQE = 1<<15, /* Bit 15: Low Squelch */ + PHY_B_AC_LONG_PACK = 1<<14, /* Bit 14: Rx Long Packets */ + PHY_B_AC_ER_CTRL = 3<<12,/* Bit 13..12: Edgerate Control */ + /* Bit 11: reserved */ + PHY_B_AC_TX_TST = 1<<10, /* Bit 10: Tx test bit, always 1 */ + /* Bit 9.. 8: reserved */ + PHY_B_AC_DIS_PRF = 1<<7, /* Bit 7: dis part resp filter */ + /* Bit 6: reserved */ + PHY_B_AC_DIS_PM = 1<<5, /* Bit 5: dis power management */ + /* Bit 4: reserved */ + PHY_B_AC_DIAG = 1<<3, /* Bit 3: Diagnostic Mode */ +}; + +/***** PHY_BCOM_AUX_STAT 16 bit r/o Auxiliary Status Reg *****/ +enum { + PHY_B_AS_AN_C = 1<<15, /* Bit 15: AutoNeg complete */ + PHY_B_AS_AN_CA = 1<<14, /* Bit 14: AN Complete Ack */ + PHY_B_AS_ANACK_D = 1<<13, /* Bit 13: AN Ack Detect */ + PHY_B_AS_ANAB_D = 1<<12, /* Bit 12: AN Ability Detect */ + PHY_B_AS_NPW = 1<<11, /* Bit 11: AN Next Page Wait */ + PHY_B_AS_AN_RES_MSK = 7<<8,/* Bit 10..8: AN HDC */ + PHY_B_AS_PDF = 1<<7, /* Bit 7: Parallel Detect. Fault */ + PHY_B_AS_RF = 1<<6, /* Bit 6: Remote Fault */ + PHY_B_AS_ANP_R = 1<<5, /* Bit 5: AN Page Received */ + PHY_B_AS_LP_ANAB = 1<<4, /* Bit 4: LP AN Ability */ + PHY_B_AS_LP_NPAB = 1<<3, /* Bit 3: LP Next Page Ability */ + PHY_B_AS_LS = 1<<2, /* Bit 2: Link Status */ + PHY_B_AS_PRR = 1<<1, /* Bit 1: Pause Resolution-Rx */ + PHY_B_AS_PRT = 1<<0, /* Bit 0: Pause Resolution-Tx */ +}; +#define PHY_B_AS_PAUSE_MSK (PHY_B_AS_PRR | PHY_B_AS_PRT) + +/***** PHY_BCOM_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +/***** PHY_BCOM_INT_MASK 16 bit r/w Interrupt Mask Reg *****/ +enum { + PHY_B_IS_PSE = 1<<14, /* Bit 14: Pair Swap Error */ + PHY_B_IS_MDXI_SC = 1<<13, /* Bit 13: MDIX Status Change */ + PHY_B_IS_HCT = 1<<12, /* Bit 12: counter above 32k */ + PHY_B_IS_LCT = 1<<11, /* Bit 11: counter above 128 */ + PHY_B_IS_AN_PR = 1<<10, /* Bit 10: Page Received */ + PHY_B_IS_NO_HDCL = 1<<9, /* Bit 9: No HCD Link */ + PHY_B_IS_NO_HDC = 1<<8, /* Bit 8: No HCD */ + PHY_B_IS_NEG_USHDC = 1<<7, /* Bit 7: Negotiated Unsup. HCD */ + PHY_B_IS_SCR_S_ER = 1<<6, /* Bit 6: Scrambler Sync Error */ + PHY_B_IS_RRS_CHANGE = 1<<5, /* Bit 5: Remote Rx Stat Change */ + PHY_B_IS_LRS_CHANGE = 1<<4, /* Bit 4: Local Rx Stat Change */ + PHY_B_IS_DUP_CHANGE = 1<<3, /* Bit 3: Duplex Mode Change */ + PHY_B_IS_LSP_CHANGE = 1<<2, /* Bit 2: Link Speed Change */ + PHY_B_IS_LST_CHANGE = 1<<1, /* Bit 1: Link Status Changed */ + PHY_B_IS_CRC_ER = 1<<0, /* Bit 0: CRC Error */ +}; +#define PHY_B_DEF_MSK (~(PHY_B_IS_AN_PR | PHY_B_IS_LST_CHANGE)) + +/* Pause Bits (PHY_B_AN_ASP and PHY_B_AN_PC) encoding */ +enum { + PHY_B_P_NO_PAUSE = 0<<10,/* Bit 11..10: no Pause Mode */ + PHY_B_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ + PHY_B_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ + PHY_B_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ +}; +/* + * Resolved Duplex mode and Capabilities (Aux Status Summary Reg) + */ +enum { + PHY_B_RES_1000FD = 7<<8,/* Bit 10..8: 1000Base-T Full Dup. */ + PHY_B_RES_1000HD = 6<<8,/* Bit 10..8: 1000Base-T Half Dup. */ +}; + +/* + * Level One-Specific + */ +/***** PHY_LONE_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_L_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_L_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_L_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_L_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_L_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_L_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ +}; + +/***** PHY_LONE_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_L_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_L_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_L_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_L_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status */ + PHY_L_1000S_LP_FD = 1<<11, /* Bit 11: Link Partner can FD */ + PHY_L_1000S_LP_HD = 1<<10, /* Bit 10: Link Partner can HD */ + + PHY_L_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ + +/***** PHY_LONE_EXT_STAT 16 bit r/o Extended Status Register *****/ + PHY_L_ES_X_FD_CAP = 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_L_ES_X_HD_CAP = 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_L_ES_T_FD_CAP = 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_L_ES_T_HD_CAP = 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/***** PHY_LONE_PORT_CFG 16 bit r/w Port Configuration Reg *****/ +enum { + PHY_L_PC_REP_MODE = 1<<15, /* Bit 15: Repeater Mode */ + + PHY_L_PC_TX_DIS = 1<<13, /* Bit 13: Tx output Disabled */ + PHY_L_PC_BY_SCR = 1<<12, /* Bit 12: Bypass Scrambler */ + PHY_L_PC_BY_45 = 1<<11, /* Bit 11: Bypass 4B5B-Decoder */ + PHY_L_PC_JAB_DIS = 1<<10, /* Bit 10: Jabber Disabled */ + PHY_L_PC_SQE = 1<<9, /* Bit 9: Enable Heartbeat */ + PHY_L_PC_TP_LOOP = 1<<8, /* Bit 8: TP Loopback */ + PHY_L_PC_SSS = 1<<7, /* Bit 7: Smart Speed Selection */ + PHY_L_PC_FIFO_SIZE = 1<<6, /* Bit 6: FIFO Size */ + PHY_L_PC_PRE_EN = 1<<5, /* Bit 5: Preamble Enable */ + PHY_L_PC_CIM = 1<<4, /* Bit 4: Carrier Integrity Mon */ + PHY_L_PC_10_SER = 1<<3, /* Bit 3: Use Serial Output */ + PHY_L_PC_ANISOL = 1<<2, /* Bit 2: Unisolate Port */ + PHY_L_PC_TEN_BIT = 1<<1, /* Bit 1: 10bit iface mode on */ + PHY_L_PC_ALTCLOCK = 1<<0, /* Bit 0: (ro) ALTCLOCK Mode on */ +}; + +/***** PHY_LONE_Q_STAT 16 bit r/o Quick Status Reg *****/ +enum { + PHY_L_QS_D_RATE = 3<<14,/* Bit 15..14: Data Rate */ + PHY_L_QS_TX_STAT = 1<<13, /* Bit 13: Transmitting */ + PHY_L_QS_RX_STAT = 1<<12, /* Bit 12: Receiving */ + PHY_L_QS_COL_STAT = 1<<11, /* Bit 11: Collision */ + PHY_L_QS_L_STAT = 1<<10, /* Bit 10: Link is up */ + PHY_L_QS_DUP_MOD = 1<<9, /* Bit 9: Full/Half Duplex */ + PHY_L_QS_AN = 1<<8, /* Bit 8: AutoNeg is On */ + PHY_L_QS_AN_C = 1<<7, /* Bit 7: AN is Complete */ + PHY_L_QS_LLE = 7<<4,/* Bit 6..4: Line Length Estim. */ + PHY_L_QS_PAUSE = 1<<3, /* Bit 3: LP advertised Pause */ + PHY_L_QS_AS_PAUSE = 1<<2, /* Bit 2: LP adv. asym. Pause */ + PHY_L_QS_ISOLATE = 1<<1, /* Bit 1: CIM Isolated */ + PHY_L_QS_EVENT = 1<<0, /* Bit 0: Event has occurred */ +}; + +/***** PHY_LONE_INT_ENAB 16 bit r/w Interrupt Enable Reg *****/ +/***** PHY_LONE_INT_STAT 16 bit r/o Interrupt Status Reg *****/ +enum { + PHY_L_IS_AN_F = 1<<13, /* Bit 13: Auto-Negotiation fault */ + PHY_L_IS_CROSS = 1<<11, /* Bit 11: Crossover used */ + PHY_L_IS_POL = 1<<10, /* Bit 10: Polarity correct. used */ + PHY_L_IS_SS = 1<<9, /* Bit 9: Smart Speed Downgrade */ + PHY_L_IS_CFULL = 1<<8, /* Bit 8: Counter Full */ + PHY_L_IS_AN_C = 1<<7, /* Bit 7: AutoNeg Complete */ + PHY_L_IS_SPEED = 1<<6, /* Bit 6: Speed Changed */ + PHY_L_IS_DUP = 1<<5, /* Bit 5: Duplex Changed */ + PHY_L_IS_LS = 1<<4, /* Bit 4: Link Status Changed */ + PHY_L_IS_ISOL = 1<<3, /* Bit 3: Isolate Occured */ + PHY_L_IS_MDINT = 1<<2, /* Bit 2: (ro) STAT: MII Int Pending */ + PHY_L_IS_INTEN = 1<<1, /* Bit 1: ENAB: Enable IRQs */ + PHY_L_IS_FORCE = 1<<0, /* Bit 0: ENAB: Force Interrupt */ +}; + +/* int. mask */ +#define PHY_L_DEF_MSK (PHY_L_IS_LS | PHY_L_IS_ISOL | PHY_L_IS_INTEN) + +/***** PHY_LONE_LED_CFG 16 bit r/w LED Configuration Reg *****/ +enum { + PHY_L_LC_LEDC = 3<<14,/* Bit 15..14: Col/Blink/On/Off */ + PHY_L_LC_LEDR = 3<<12,/* Bit 13..12: Rx/Blink/On/Off */ + PHY_L_LC_LEDT = 3<<10,/* Bit 11..10: Tx/Blink/On/Off */ + PHY_L_LC_LEDG = 3<<8,/* Bit 9..8: Giga/Blink/On/Off */ + PHY_L_LC_LEDS = 3<<6,/* Bit 7..6: 10-100/Blink/On/Off */ + PHY_L_LC_LEDL = 3<<4,/* Bit 5..4: Link/Blink/On/Off */ + PHY_L_LC_LEDF = 3<<2,/* Bit 3..2: Duplex/Blink/On/Off */ + PHY_L_LC_PSTRECH= 1<<1, /* Bit 1: Strech LED Pulses */ + PHY_L_LC_FREQ = 1<<0, /* Bit 0: 30/100 ms */ +}; + +/***** PHY_LONE_PORT_CTRL 16 bit r/w Port Control Reg *****/ +enum { + PHY_L_PC_TX_TCLK = 1<<15, /* Bit 15: Enable TX_TCLK */ + PHY_L_PC_ALT_NP = 1<<13, /* Bit 14: Alternate Next Page */ + PHY_L_PC_GMII_ALT= 1<<12, /* Bit 13: Alternate GMII driver */ + PHY_L_PC_TEN_CRS = 1<<10, /* Bit 10: Extend CRS*/ +}; + +/***** PHY_LONE_CIM 16 bit r/o CIM Reg *****/ +enum { + PHY_L_CIM_ISOL = 0xff<<8,/* Bit 15..8: Isolate Count */ + PHY_L_CIM_FALSE_CAR = 0xff, /* Bit 7..0: False Carrier Count */ +}; + +/* + * Pause Bits (PHY_L_AN_ASP and PHY_L_AN_PC) encoding + */ +enum { + PHY_L_P_NO_PAUSE= 0<<10,/* Bit 11..10: no Pause Mode */ + PHY_L_P_SYM_MD = 1<<10, /* Bit 11..10: symmetric Pause Mode */ + PHY_L_P_ASYM_MD = 2<<10,/* Bit 11..10: asymmetric Pause Mode */ + PHY_L_P_BOTH_MD = 3<<10,/* Bit 11..10: both Pause Mode */ +}; + +/* + * National-Specific + */ +/***** PHY_NAT_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_N_1000C_TEST= 7<<13,/* Bit 15..13: Test Modes */ + PHY_N_1000C_MSE = 1<<12, /* Bit 12: Master/Slave Enable */ + PHY_N_1000C_MSC = 1<<11, /* Bit 11: M/S Configuration */ + PHY_N_1000C_RD = 1<<10, /* Bit 10: Repeater/DTE */ + PHY_N_1000C_AFD = 1<<9, /* Bit 9: Advertise Full Duplex */ + PHY_N_1000C_AHD = 1<<8, /* Bit 8: Advertise Half Duplex */ + PHY_N_1000C_APC = 1<<7, /* Bit 7: Asymmetric Pause Cap. */}; + + +/***** PHY_NAT_1000T_STAT 16 bit r/o 1000Base-T Status Reg *****/ +enum { + PHY_N_1000S_MSF = 1<<15, /* Bit 15: Master/Slave Fault */ + PHY_N_1000S_MSR = 1<<14, /* Bit 14: Master/Slave Result */ + PHY_N_1000S_LRS = 1<<13, /* Bit 13: Local Receiver Status */ + PHY_N_1000S_RRS = 1<<12, /* Bit 12: Remote Receiver Status*/ + PHY_N_1000S_LP_FD= 1<<11, /* Bit 11: Link Partner can FD */ + PHY_N_1000S_LP_HD= 1<<10, /* Bit 10: Link Partner can HD */ + PHY_N_1000C_LP_APC= 1<<9, /* Bit 9: LP Asym. Pause Cap. */ + PHY_N_1000S_IEC = 0xff, /* Bit 7..0: Idle Error Count */ +}; + +/***** PHY_NAT_EXT_STAT 16 bit r/o Extended Status Register *****/ +enum { + PHY_N_ES_X_FD_CAP= 1<<15, /* Bit 15: 1000Base-X FD capable */ + PHY_N_ES_X_HD_CAP= 1<<14, /* Bit 14: 1000Base-X HD capable */ + PHY_N_ES_T_FD_CAP= 1<<13, /* Bit 13: 1000Base-T FD capable */ + PHY_N_ES_T_HD_CAP= 1<<12, /* Bit 12: 1000Base-T HD capable */ +}; + +/** Marvell-Specific */ +enum { + PHY_M_AN_NXT_PG = 1<<15, /* Request Next Page */ + PHY_M_AN_ACK = 1<<14, /* (ro) Acknowledge Received */ + PHY_M_AN_RF = 1<<13, /* Remote Fault */ + + PHY_M_AN_ASP = 1<<11, /* Asymmetric Pause */ + PHY_M_AN_PC = 1<<10, /* MAC Pause implemented */ + PHY_M_AN_100_T4 = 1<<9, /* Not cap. 100Base-T4 (always 0) */ + PHY_M_AN_100_FD = 1<<8, /* Advertise 100Base-TX Full Duplex */ + PHY_M_AN_100_HD = 1<<7, /* Advertise 100Base-TX Half Duplex */ + PHY_M_AN_10_FD = 1<<6, /* Advertise 10Base-TX Full Duplex */ + PHY_M_AN_10_HD = 1<<5, /* Advertise 10Base-TX Half Duplex */ + PHY_M_AN_SEL_MSK =0x1f<<4, /* Bit 4.. 0: Selector Field Mask */ +}; + +/* special defines for FIBER (88E1011S only) */ +enum { + PHY_M_AN_ASP_X = 1<<8, /* Asymmetric Pause */ + PHY_M_AN_PC_X = 1<<7, /* MAC Pause implemented */ + PHY_M_AN_1000X_AHD = 1<<6, /* Advertise 10000Base-X Half Duplex */ + PHY_M_AN_1000X_AFD = 1<<5, /* Advertise 10000Base-X Full Duplex */ +}; + +/* Pause Bits (PHY_M_AN_ASP_X and PHY_M_AN_PC_X) encoding */ +enum { + PHY_M_P_NO_PAUSE_X = 0<<7,/* Bit 8.. 7: no Pause Mode */ + PHY_M_P_SYM_MD_X = 1<<7, /* Bit 8.. 7: symmetric Pause Mode */ + PHY_M_P_ASYM_MD_X = 2<<7,/* Bit 8.. 7: asymmetric Pause Mode */ + PHY_M_P_BOTH_MD_X = 3<<7,/* Bit 8.. 7: both Pause Mode */ +}; + +/***** PHY_MARV_1000T_CTRL 16 bit r/w 1000Base-T Control Reg *****/ +enum { + PHY_M_1000C_TEST = 7<<13,/* Bit 15..13: Test Modes */ + PHY_M_1000C_MSE = 1<<12, /* Manual Master/Slave Enable */ + PHY_M_1000C_MSC = 1<<11, /* M/S Configuration (1=Master) */ + PHY_M_1000C_MPD = 1<<10, /* Multi-Port Device */ + PHY_M_1000C_AFD = 1<<9, /* Advertise Full Duplex */ + PHY_M_1000C_AHD = 1<<8, /* Advertise Half Duplex */ +}; + +/***** PHY_MARV_PHY_CTRL 16 bit r/w PHY Specific Ctrl Reg *****/ +enum { + PHY_M_PC_TX_FFD_MSK = 3<<14,/* Bit 15..14: Tx FIFO Depth Mask */ + PHY_M_PC_RX_FFD_MSK = 3<<12,/* Bit 13..12: Rx FIFO Depth Mask */ + PHY_M_PC_ASS_CRS_TX = 1<<11, /* Assert CRS on Transmit */ + PHY_M_PC_FL_GOOD = 1<<10, /* Force Link Good */ + PHY_M_PC_EN_DET_MSK = 3<<8,/* Bit 9.. 8: Energy Detect Mask */ + PHY_M_PC_ENA_EXT_D = 1<<7, /* Enable Ext. Distance (10BT) */ + PHY_M_PC_MDIX_MSK = 3<<5,/* Bit 6.. 5: MDI/MDIX Config. Mask */ + PHY_M_PC_DIS_125CLK = 1<<4, /* Disable 125 CLK */ + PHY_M_PC_MAC_POW_UP = 1<<3, /* MAC Power up */ + PHY_M_PC_SQE_T_ENA = 1<<2, /* SQE Test Enabled */ + PHY_M_PC_POL_R_DIS = 1<<1, /* Polarity Reversal Disabled */ + PHY_M_PC_DIS_JABBER = 1<<0, /* Disable Jabber */ +}; + +enum { + PHY_M_PC_EN_DET = 2<<8, /* Energy Detect (Mode 1) */ + PHY_M_PC_EN_DET_PLUS = 3<<8, /* Energy Detect Plus (Mode 2) */ +}; + +#define PHY_M_PC_MDI_XMODE(x) (((x)<<5) & PHY_M_PC_MDIX_MSK) + +enum { + PHY_M_PC_MAN_MDI = 0, /* 00 = Manual MDI configuration */ + PHY_M_PC_MAN_MDIX = 1, /* 01 = Manual MDIX configuration */ + PHY_M_PC_ENA_AUTO = 3, /* 11 = Enable Automatic Crossover */ +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PC_ENA_DTE_DT = 1<<15, /* Enable Data Terminal Equ. (DTE) Detect */ + PHY_M_PC_ENA_ENE_DT = 1<<14, /* Enable Energy Detect (sense & pulse) */ + PHY_M_PC_DIS_NLP_CK = 1<<13, /* Disable Normal Link Puls (NLP) Check */ + PHY_M_PC_ENA_LIP_NP = 1<<12, /* Enable Link Partner Next Page Reg. */ + PHY_M_PC_DIS_NLP_GN = 1<<11, /* Disable Normal Link Puls Generation */ + + PHY_M_PC_DIS_SCRAMB = 1<<9, /* Disable Scrambler */ + PHY_M_PC_DIS_FEFI = 1<<8, /* Disable Far End Fault Indic. (FEFI) */ + + PHY_M_PC_SH_TP_SEL = 1<<6, /* Shielded Twisted Pair Select */ + PHY_M_PC_RX_FD_MSK = 3<<2,/* Bit 3.. 2: Rx FIFO Depth Mask */ +}; + +/***** PHY_MARV_PHY_STAT 16 bit r/o PHY Specific Status Reg *****/ +enum { + PHY_M_PS_SPEED_MSK = 3<<14, /* Bit 15..14: Speed Mask */ + PHY_M_PS_SPEED_1000 = 1<<15, /* 10 = 1000 Mbps */ + PHY_M_PS_SPEED_100 = 1<<14, /* 01 = 100 Mbps */ + PHY_M_PS_SPEED_10 = 0, /* 00 = 10 Mbps */ + PHY_M_PS_FULL_DUP = 1<<13, /* Full Duplex */ + PHY_M_PS_PAGE_REC = 1<<12, /* Page Received */ + PHY_M_PS_SPDUP_RES = 1<<11, /* Speed & Duplex Resolved */ + PHY_M_PS_LINK_UP = 1<<10, /* Link Up */ + PHY_M_PS_CABLE_MSK = 7<<7, /* Bit 9.. 7: Cable Length Mask */ + PHY_M_PS_MDI_X_STAT = 1<<6, /* MDI Crossover Stat (1=MDIX) */ + PHY_M_PS_DOWNS_STAT = 1<<5, /* Downshift Status (1=downsh.) */ + PHY_M_PS_ENDET_STAT = 1<<4, /* Energy Detect Status (1=act) */ + PHY_M_PS_TX_P_EN = 1<<3, /* Tx Pause Enabled */ + PHY_M_PS_RX_P_EN = 1<<2, /* Rx Pause Enabled */ + PHY_M_PS_POL_REV = 1<<1, /* Polarity Reversed */ + PHY_M_PS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_PS_PAUSE_MSK (PHY_M_PS_TX_P_EN | PHY_M_PS_RX_P_EN) + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +enum { + PHY_M_PS_DTE_DETECT = 1<<15, /* Data Terminal Equipment (DTE) Detected */ + PHY_M_PS_RES_SPEED = 1<<14, /* Resolved Speed (1=100 Mbps, 0=10 Mbps */ +}; + +enum { + PHY_M_IS_AN_ERROR = 1<<15, /* Auto-Negotiation Error */ + PHY_M_IS_LSP_CHANGE = 1<<14, /* Link Speed Changed */ + PHY_M_IS_DUP_CHANGE = 1<<13, /* Duplex Mode Changed */ + PHY_M_IS_AN_PR = 1<<12, /* Page Received */ + PHY_M_IS_AN_COMPL = 1<<11, /* Auto-Negotiation Completed */ + PHY_M_IS_LST_CHANGE = 1<<10, /* Link Status Changed */ + PHY_M_IS_SYMB_ERROR = 1<<9, /* Symbol Error */ + PHY_M_IS_FALSE_CARR = 1<<8, /* False Carrier */ + PHY_M_IS_FIFO_ERROR = 1<<7, /* FIFO Overflow/Underrun Error */ + PHY_M_IS_MDI_CHANGE = 1<<6, /* MDI Crossover Changed */ + PHY_M_IS_DOWNSH_DET = 1<<5, /* Downshift Detected */ + PHY_M_IS_END_CHANGE = 1<<4, /* Energy Detect Changed */ + + PHY_M_IS_DTE_CHANGE = 1<<2, /* DTE Power Det. Status Changed */ + PHY_M_IS_POL_CHANGE = 1<<1, /* Polarity Changed */ + PHY_M_IS_JABBER = 1<<0, /* Jabber */ +}; + +#define PHY_M_DEF_MSK ( PHY_M_IS_AN_ERROR | PHY_M_IS_LSP_CHANGE | \ + PHY_M_IS_LST_CHANGE | PHY_M_IS_FIFO_ERROR) + +/***** PHY_MARV_EXT_CTRL 16 bit r/w Ext. PHY Specific Ctrl *****/ +enum { + PHY_M_EC_ENA_BC_EXT = 1<<15, /* Enable Block Carr. Ext. (88E1111 only) */ + PHY_M_EC_ENA_LIN_LB = 1<<14, /* Enable Line Loopback (88E1111 only) */ + + PHY_M_EC_DIS_LINK_P = 1<<12, /* Disable Link Pulses (88E1111 only) */ + PHY_M_EC_M_DSC_MSK = 3<<10, /* Bit 11..10: Master Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_S_DSC_MSK = 3<<8,/* Bit 9.. 8: Slave Downshift Counter */ + /* (88E1011 only) */ + PHY_M_EC_M_DSC_MSK2 = 7<<9,/* Bit 11.. 9: Master Downshift Counter */ + /* (88E1111 only) */ + PHY_M_EC_DOWN_S_ENA = 1<<8, /* Downshift Enable (88E1111 only) */ + /* !!! Errata in spec. (1 = disable) */ + PHY_M_EC_RX_TIM_CT = 1<<7, /* RGMII Rx Timing Control*/ + PHY_M_EC_MAC_S_MSK = 7<<4,/* Bit 6.. 4: Def. MAC interface speed */ + PHY_M_EC_FIB_AN_ENA = 1<<3, /* Fiber Auto-Neg. Enable (88E1011S only) */ + PHY_M_EC_DTE_D_ENA = 1<<2, /* DTE Detect Enable (88E1111 only) */ + PHY_M_EC_TX_TIM_CT = 1<<1, /* RGMII Tx Timing Control */ + PHY_M_EC_TRANS_DIS = 1<<0, /* Transmitter Disable (88E1111 only) */}; + +#define PHY_M_EC_M_DSC(x) ((x)<<10) /* 00=1x; 01=2x; 10=3x; 11=4x */ +#define PHY_M_EC_S_DSC(x) ((x)<<8) /* 00=dis; 01=1x; 10=2x; 11=3x */ +#define PHY_M_EC_MAC_S(x) ((x)<<4) /* 01X=0; 110=2.5; 111=25 (MHz) */ + +#define PHY_M_EC_M_DSC_2(x) ((x)<<9) /* 000=1x; 001=2x; 010=3x; 011=4x */ + /* 100=5x; 101=6x; 110=7x; 111=8x */ +enum { + MAC_TX_CLK_0_MHZ = 2, + MAC_TX_CLK_2_5_MHZ = 6, + MAC_TX_CLK_25_MHZ = 7, +}; + +/***** PHY_MARV_LED_CTRL 16 bit r/w LED Control Reg *****/ +enum { + PHY_M_LEDC_DIS_LED = 1<<15, /* Disable LED */ + PHY_M_LEDC_PULS_MSK = 7<<12,/* Bit 14..12: Pulse Stretch Mask */ + PHY_M_LEDC_F_INT = 1<<11, /* Force Interrupt */ + PHY_M_LEDC_BL_R_MSK = 7<<8,/* Bit 10.. 8: Blink Rate Mask */ + PHY_M_LEDC_DP_C_LSB = 1<<7, /* Duplex Control (LSB, 88E1111 only) */ + PHY_M_LEDC_TX_C_LSB = 1<<6, /* Tx Control (LSB, 88E1111 only) */ + PHY_M_LEDC_LK_C_MSK = 7<<3,/* Bit 5.. 3: Link Control Mask */ + /* (88E1111 only) */ +}; + +enum { + PHY_M_LEDC_LINK_MSK = 3<<3,/* Bit 4.. 3: Link Control Mask */ + /* (88E1011 only) */ + PHY_M_LEDC_DP_CTRL = 1<<2, /* Duplex Control */ + PHY_M_LEDC_DP_C_MSB = 1<<2, /* Duplex Control (MSB, 88E1111 only) */ + PHY_M_LEDC_RX_CTRL = 1<<1, /* Rx Activity / Link */ + PHY_M_LEDC_TX_CTRL = 1<<0, /* Tx Activity / Link */ + PHY_M_LEDC_TX_C_MSB = 1<<0, /* Tx Control (MSB, 88E1111 only) */ +}; + +#define PHY_M_LED_PULS_DUR(x) ( ((x)<<12) & PHY_M_LEDC_PULS_MSK) + +enum { + PULS_NO_STR = 0,/* no pulse stretching */ + PULS_21MS = 1,/* 21 ms to 42 ms */ + PULS_42MS = 2,/* 42 ms to 84 ms */ + PULS_84MS = 3,/* 84 ms to 170 ms */ + PULS_170MS = 4,/* 170 ms to 340 ms */ + PULS_340MS = 5,/* 340 ms to 670 ms */ + PULS_670MS = 6,/* 670 ms to 1.3 s */ + PULS_1300MS = 7,/* 1.3 s to 2.7 s */ +}; + +#define PHY_M_LED_BLINK_RT(x) ( ((x)<<8) & PHY_M_LEDC_BL_R_MSK) + +enum { + BLINK_42MS = 0,/* 42 ms */ + BLINK_84MS = 1,/* 84 ms */ + BLINK_170MS = 2,/* 170 ms */ + BLINK_340MS = 3,/* 340 ms */ + BLINK_670MS = 4,/* 670 ms */ +}; + +/***** PHY_MARV_LED_OVER 16 bit r/w Manual LED Override Reg *****/ +#define PHY_M_LED_MO_SGMII(x) ((x)<<14) /* Bit 15..14: SGMII AN Timer */ + /* Bit 13..12: reserved */ +#define PHY_M_LED_MO_DUP(x) ((x)<<10) /* Bit 11..10: Duplex */ +#define PHY_M_LED_MO_10(x) ((x)<<8) /* Bit 9.. 8: Link 10 */ +#define PHY_M_LED_MO_100(x) ((x)<<6) /* Bit 7.. 6: Link 100 */ +#define PHY_M_LED_MO_1000(x) ((x)<<4) /* Bit 5.. 4: Link 1000 */ +#define PHY_M_LED_MO_RX(x) ((x)<<2) /* Bit 3.. 2: Rx */ +#define PHY_M_LED_MO_TX(x) ((x)<<0) /* Bit 1.. 0: Tx */ + +enum { + MO_LED_NORM = 0, + MO_LED_BLINK = 1, + MO_LED_OFF = 2, + MO_LED_ON = 3, +}; + +/***** PHY_MARV_EXT_CTRL_2 16 bit r/w Ext. PHY Specific Ctrl 2 *****/ +enum { + PHY_M_EC2_FI_IMPED = 1<<6, /* Fiber Input Impedance */ + PHY_M_EC2_FO_IMPED = 1<<5, /* Fiber Output Impedance */ + PHY_M_EC2_FO_M_CLK = 1<<4, /* Fiber Mode Clock Enable */ + PHY_M_EC2_FO_BOOST = 1<<3, /* Fiber Output Boost */ + PHY_M_EC2_FO_AM_MSK = 7,/* Bit 2.. 0: Fiber Output Amplitude */ +}; + +/***** PHY_MARV_EXT_P_STAT 16 bit r/w Ext. PHY Specific Status *****/ +enum { + PHY_M_FC_AUTO_SEL = 1<<15, /* Fiber/Copper Auto Sel. Dis. */ + PHY_M_FC_AN_REG_ACC = 1<<14, /* Fiber/Copper AN Reg. Access */ + PHY_M_FC_RESOLUTION = 1<<13, /* Fiber/Copper Resolution */ + PHY_M_SER_IF_AN_BP = 1<<12, /* Ser. IF AN Bypass Enable */ + PHY_M_SER_IF_BP_ST = 1<<11, /* Ser. IF AN Bypass Status */ + PHY_M_IRQ_POLARITY = 1<<10, /* IRQ polarity */ + PHY_M_DIS_AUT_MED = 1<<9, /* Disable Aut. Medium Reg. Selection */ + /* (88E1111 only) */ + /* Bit 9.. 4: reserved (88E1011 only) */ + PHY_M_UNDOC1 = 1<<7, /* undocumented bit !! */ + PHY_M_DTE_POW_STAT = 1<<4, /* DTE Power Status (88E1111 only) */ + PHY_M_MODE_MASK = 0xf, /* Bit 3.. 0: copy of HWCFG MODE[3:0] */ +}; + +/***** PHY_MARV_CABLE_DIAG 16 bit r/o Cable Diagnostic Reg *****/ +enum { + PHY_M_CABD_ENA_TEST = 1<<15, /* Enable Test (Page 0) */ + PHY_M_CABD_DIS_WAIT = 1<<15, /* Disable Waiting Period (Page 1) */ + /* (88E1111 only) */ + PHY_M_CABD_STAT_MSK = 3<<13, /* Bit 14..13: Status Mask */ + PHY_M_CABD_AMPL_MSK = 0x1f<<8,/* Bit 12.. 8: Amplitude Mask */ + /* (88E1111 only) */ + PHY_M_CABD_DIST_MSK = 0xff, /* Bit 7.. 0: Distance Mask */ +}; + +/* values for Cable Diagnostic Status (11=fail; 00=OK; 10=open; 01=short) */ +enum { + CABD_STAT_NORMAL= 0, + CABD_STAT_SHORT = 1, + CABD_STAT_OPEN = 2, + CABD_STAT_FAIL = 3, +}; + +/* for 10/100 Fast Ethernet PHY (88E3082 only) */ +/***** PHY_MARV_FE_LED_PAR 16 bit r/w LED Parallel Select Reg. *****/ + /* Bit 15..12: reserved (used internally) */ +enum { + PHY_M_FELP_LED2_MSK = 0xf<<8, /* Bit 11.. 8: LED2 Mask (LINK) */ + PHY_M_FELP_LED1_MSK = 0xf<<4, /* Bit 7.. 4: LED1 Mask (ACT) */ + PHY_M_FELP_LED0_MSK = 0xf, /* Bit 3.. 0: LED0 Mask (SPEED) */ +}; + +#define PHY_M_FELP_LED2_CTRL(x) ( ((x)<<8) & PHY_M_FELP_LED2_MSK) +#define PHY_M_FELP_LED1_CTRL(x) ( ((x)<<4) & PHY_M_FELP_LED1_MSK) +#define PHY_M_FELP_LED0_CTRL(x) ( ((x)<<0) & PHY_M_FELP_LED0_MSK) + +enum { + LED_PAR_CTRL_COLX = 0x00, + LED_PAR_CTRL_ERROR = 0x01, + LED_PAR_CTRL_DUPLEX = 0x02, + LED_PAR_CTRL_DP_COL = 0x03, + LED_PAR_CTRL_SPEED = 0x04, + LED_PAR_CTRL_LINK = 0x05, + LED_PAR_CTRL_TX = 0x06, + LED_PAR_CTRL_RX = 0x07, + LED_PAR_CTRL_ACT = 0x08, + LED_PAR_CTRL_LNK_RX = 0x09, + LED_PAR_CTRL_LNK_AC = 0x0a, + LED_PAR_CTRL_ACT_BL = 0x0b, + LED_PAR_CTRL_TX_BL = 0x0c, + LED_PAR_CTRL_RX_BL = 0x0d, + LED_PAR_CTRL_COL_BL = 0x0e, + LED_PAR_CTRL_INACT = 0x0f +}; + +/*****,PHY_MARV_FE_SPEC_2 16 bit r/w Specific Control Reg. 2 *****/ +enum { + PHY_M_FESC_DIS_WAIT = 1<<2, /* Disable TDR Waiting Period */ + PHY_M_FESC_ENA_MCLK = 1<<1, /* Enable MAC Rx Clock in sleep mode */ + PHY_M_FESC_SEL_CL_A = 1<<0, /* Select Class A driver (100B-TX) */ +}; + +/* for Yukon-2 Gigabit Ethernet PHY (88E1112 only) */ +/***** PHY_MARV_PHY_CTRL (page 2) 16 bit r/w MAC Specific Ctrl *****/ +enum { + PHY_M_MAC_MD_MSK = 7<<7, /* Bit 9.. 7: Mode Select Mask */ + PHY_M_MAC_MD_AUTO = 3,/* Auto Copper/1000Base-X */ + PHY_M_MAC_MD_COPPER = 5,/* Copper only */ + PHY_M_MAC_MD_1000BX = 7,/* 1000Base-X only */ +}; +#define PHY_M_MAC_MODE_SEL(x) ( ((x)<<7) & PHY_M_MAC_MD_MSK) + +/***** PHY_MARV_PHY_CTRL (page 3) 16 bit r/w LED Control Reg. *****/ +enum { + PHY_M_LEDC_LOS_MSK = 0xf<<12,/* Bit 15..12: LOS LED Ctrl. Mask */ + PHY_M_LEDC_INIT_MSK = 0xf<<8, /* Bit 11.. 8: INIT LED Ctrl. Mask */ + PHY_M_LEDC_STA1_MSK = 0xf<<4,/* Bit 7.. 4: STAT1 LED Ctrl. Mask */ + PHY_M_LEDC_STA0_MSK = 0xf, /* Bit 3.. 0: STAT0 LED Ctrl. Mask */ +}; + +#define PHY_M_LEDC_LOS_CTRL(x) ( ((x)<<12) & PHY_M_LEDC_LOS_MSK) +#define PHY_M_LEDC_INIT_CTRL(x) ( ((x)<<8) & PHY_M_LEDC_INIT_MSK) +#define PHY_M_LEDC_STA1_CTRL(x) ( ((x)<<4) & PHY_M_LEDC_STA1_MSK) +#define PHY_M_LEDC_STA0_CTRL(x) ( ((x)<<0) & PHY_M_LEDC_STA0_MSK) + +/* GMAC registers */ +/* Port Registers */ +enum { + GM_GP_STAT = 0x0000, /* 16 bit r/o General Purpose Status */ + GM_GP_CTRL = 0x0004, /* 16 bit r/w General Purpose Control */ + GM_TX_CTRL = 0x0008, /* 16 bit r/w Transmit Control Reg. */ + GM_RX_CTRL = 0x000c, /* 16 bit r/w Receive Control Reg. */ + GM_TX_FLOW_CTRL = 0x0010, /* 16 bit r/w Transmit Flow-Control */ + GM_TX_PARAM = 0x0014, /* 16 bit r/w Transmit Parameter Reg. */ + GM_SERIAL_MODE = 0x0018, /* 16 bit r/w Serial Mode Register */ +/* Source Address Registers */ + GM_SRC_ADDR_1L = 0x001c, /* 16 bit r/w Source Address 1 (low) */ + GM_SRC_ADDR_1M = 0x0020, /* 16 bit r/w Source Address 1 (middle) */ + GM_SRC_ADDR_1H = 0x0024, /* 16 bit r/w Source Address 1 (high) */ + GM_SRC_ADDR_2L = 0x0028, /* 16 bit r/w Source Address 2 (low) */ + GM_SRC_ADDR_2M = 0x002c, /* 16 bit r/w Source Address 2 (middle) */ + GM_SRC_ADDR_2H = 0x0030, /* 16 bit r/w Source Address 2 (high) */ + +/* Multicast Address Hash Registers */ + GM_MC_ADDR_H1 = 0x0034, /* 16 bit r/w Multicast Address Hash 1 */ + GM_MC_ADDR_H2 = 0x0038, /* 16 bit r/w Multicast Address Hash 2 */ + GM_MC_ADDR_H3 = 0x003c, /* 16 bit r/w Multicast Address Hash 3 */ + GM_MC_ADDR_H4 = 0x0040, /* 16 bit r/w Multicast Address Hash 4 */ + +/* Interrupt Source Registers */ + GM_TX_IRQ_SRC = 0x0044, /* 16 bit r/o Tx Overflow IRQ Source */ + GM_RX_IRQ_SRC = 0x0048, /* 16 bit r/o Rx Overflow IRQ Source */ + GM_TR_IRQ_SRC = 0x004c, /* 16 bit r/o Tx/Rx Over. IRQ Source */ + +/* Interrupt Mask Registers */ + GM_TX_IRQ_MSK = 0x0050, /* 16 bit r/w Tx Overflow IRQ Mask */ + GM_RX_IRQ_MSK = 0x0054, /* 16 bit r/w Rx Overflow IRQ Mask */ + GM_TR_IRQ_MSK = 0x0058, /* 16 bit r/w Tx/Rx Over. IRQ Mask */ + +/* Serial Management Interface (SMI) Registers */ + GM_SMI_CTRL = 0x0080, /* 16 bit r/w SMI Control Register */ + GM_SMI_DATA = 0x0084, /* 16 bit r/w SMI Data Register */ + GM_PHY_ADDR = 0x0088, /* 16 bit r/w GPHY Address Register */ +}; + +/* MIB Counters */ +#define GM_MIB_CNT_BASE 0x0100 /* Base Address of MIB Counters */ +#define GM_MIB_CNT_SIZE 44 /* Number of MIB Counters */ + +/* + * MIB Counters base address definitions (low word) - + * use offset 4 for access to high word (32 bit r/o) + */ +enum { + GM_RXF_UC_OK = GM_MIB_CNT_BASE + 0, /* Unicast Frames Received OK */ + GM_RXF_BC_OK = GM_MIB_CNT_BASE + 8, /* Broadcast Frames Received OK */ + GM_RXF_MPAUSE = GM_MIB_CNT_BASE + 16, /* Pause MAC Ctrl Frames Received */ + GM_RXF_MC_OK = GM_MIB_CNT_BASE + 24, /* Multicast Frames Received OK */ + GM_RXF_FCS_ERR = GM_MIB_CNT_BASE + 32, /* Rx Frame Check Seq. Error */ + /* GM_MIB_CNT_BASE + 40: reserved */ + GM_RXO_OK_LO = GM_MIB_CNT_BASE + 48, /* Octets Received OK Low */ + GM_RXO_OK_HI = GM_MIB_CNT_BASE + 56, /* Octets Received OK High */ + GM_RXO_ERR_LO = GM_MIB_CNT_BASE + 64, /* Octets Received Invalid Low */ + GM_RXO_ERR_HI = GM_MIB_CNT_BASE + 72, /* Octets Received Invalid High */ + GM_RXF_SHT = GM_MIB_CNT_BASE + 80, /* Frames <64 Byte Received OK */ + GM_RXE_FRAG = GM_MIB_CNT_BASE + 88, /* Frames <64 Byte Received with FCS Err */ + GM_RXF_64B = GM_MIB_CNT_BASE + 96, /* 64 Byte Rx Frame */ + GM_RXF_127B = GM_MIB_CNT_BASE + 104, /* 65-127 Byte Rx Frame */ + GM_RXF_255B = GM_MIB_CNT_BASE + 112, /* 128-255 Byte Rx Frame */ + GM_RXF_511B = GM_MIB_CNT_BASE + 120, /* 256-511 Byte Rx Frame */ + GM_RXF_1023B = GM_MIB_CNT_BASE + 128, /* 512-1023 Byte Rx Frame */ + GM_RXF_1518B = GM_MIB_CNT_BASE + 136, /* 1024-1518 Byte Rx Frame */ + GM_RXF_MAX_SZ = GM_MIB_CNT_BASE + 144, /* 1519-MaxSize Byte Rx Frame */ + GM_RXF_LNG_ERR = GM_MIB_CNT_BASE + 152, /* Rx Frame too Long Error */ + GM_RXF_JAB_PKT = GM_MIB_CNT_BASE + 160, /* Rx Jabber Packet Frame */ + /* GM_MIB_CNT_BASE + 168: reserved */ + GM_RXE_FIFO_OV = GM_MIB_CNT_BASE + 176, /* Rx FIFO overflow Event */ + /* GM_MIB_CNT_BASE + 184: reserved */ + GM_TXF_UC_OK = GM_MIB_CNT_BASE + 192, /* Unicast Frames Xmitted OK */ + GM_TXF_BC_OK = GM_MIB_CNT_BASE + 200, /* Broadcast Frames Xmitted OK */ + GM_TXF_MPAUSE = GM_MIB_CNT_BASE + 208, /* Pause MAC Ctrl Frames Xmitted */ + GM_TXF_MC_OK = GM_MIB_CNT_BASE + 216, /* Multicast Frames Xmitted OK */ + GM_TXO_OK_LO = GM_MIB_CNT_BASE + 224, /* Octets Transmitted OK Low */ + GM_TXO_OK_HI = GM_MIB_CNT_BASE + 232, /* Octets Transmitted OK High */ + GM_TXF_64B = GM_MIB_CNT_BASE + 240, /* 64 Byte Tx Frame */ + GM_TXF_127B = GM_MIB_CNT_BASE + 248, /* 65-127 Byte Tx Frame */ + GM_TXF_255B = GM_MIB_CNT_BASE + 256, /* 128-255 Byte Tx Frame */ + GM_TXF_511B = GM_MIB_CNT_BASE + 264, /* 256-511 Byte Tx Frame */ + GM_TXF_1023B = GM_MIB_CNT_BASE + 272, /* 512-1023 Byte Tx Frame */ + GM_TXF_1518B = GM_MIB_CNT_BASE + 280, /* 1024-1518 Byte Tx Frame */ + GM_TXF_MAX_SZ = GM_MIB_CNT_BASE + 288, /* 1519-MaxSize Byte Tx Frame */ + + GM_TXF_COL = GM_MIB_CNT_BASE + 304, /* Tx Collision */ + GM_TXF_LAT_COL = GM_MIB_CNT_BASE + 312, /* Tx Late Collision */ + GM_TXF_ABO_COL = GM_MIB_CNT_BASE + 320, /* Tx aborted due to Exces. Col. */ + GM_TXF_MUL_COL = GM_MIB_CNT_BASE + 328, /* Tx Multiple Collision */ + GM_TXF_SNG_COL = GM_MIB_CNT_BASE + 336, /* Tx Single Collision */ + GM_TXE_FIFO_UR = GM_MIB_CNT_BASE + 344, /* Tx FIFO Underrun Event */ +}; + +/* GMAC Bit Definitions */ +/* GM_GP_STAT 16 bit r/o General Purpose Status Register */ +enum { + GM_GPSR_SPEED = 1<<15, /* Bit 15: Port Speed (1 = 100 Mbps) */ + GM_GPSR_DUPLEX = 1<<14, /* Bit 14: Duplex Mode (1 = Full) */ + GM_GPSR_FC_TX_DIS = 1<<13, /* Bit 13: Tx Flow-Control Mode Disabled */ + GM_GPSR_LINK_UP = 1<<12, /* Bit 12: Link Up Status */ + GM_GPSR_PAUSE = 1<<11, /* Bit 11: Pause State */ + GM_GPSR_TX_ACTIVE = 1<<10, /* Bit 10: Tx in Progress */ + GM_GPSR_EXC_COL = 1<<9, /* Bit 9: Excessive Collisions Occured */ + GM_GPSR_LAT_COL = 1<<8, /* Bit 8: Late Collisions Occured */ + + GM_GPSR_PHY_ST_CH = 1<<5, /* Bit 5: PHY Status Change */ + GM_GPSR_GIG_SPEED = 1<<4, /* Bit 4: Gigabit Speed (1 = 1000 Mbps) */ + GM_GPSR_PART_MODE = 1<<3, /* Bit 3: Partition mode */ + GM_GPSR_FC_RX_DIS = 1<<2, /* Bit 2: Rx Flow-Control Mode Disabled */ + GM_GPSR_PROM_EN = 1<<1, /* Bit 1: Promiscuous Mode Enabled */ +}; + +/* GM_GP_CTRL 16 bit r/w General Purpose Control Register */ +enum { + GM_GPCR_PROM_ENA = 1<<14, /* Bit 14: Enable Promiscuous Mode */ + GM_GPCR_FC_TX_DIS = 1<<13, /* Bit 13: Disable Tx Flow-Control Mode */ + GM_GPCR_TX_ENA = 1<<12, /* Bit 12: Enable Transmit */ + GM_GPCR_RX_ENA = 1<<11, /* Bit 11: Enable Receive */ + GM_GPCR_BURST_ENA = 1<<10, /* Bit 10: Enable Burst Mode */ + GM_GPCR_LOOP_ENA = 1<<9, /* Bit 9: Enable MAC Loopback Mode */ + GM_GPCR_PART_ENA = 1<<8, /* Bit 8: Enable Partition Mode */ + GM_GPCR_GIGS_ENA = 1<<7, /* Bit 7: Gigabit Speed (1000 Mbps) */ + GM_GPCR_FL_PASS = 1<<6, /* Bit 6: Force Link Pass */ + GM_GPCR_DUP_FULL = 1<<5, /* Bit 5: Full Duplex Mode */ + GM_GPCR_FC_RX_DIS = 1<<4, /* Bit 4: Disable Rx Flow-Control Mode */ + GM_GPCR_SPEED_100 = 1<<3, /* Bit 3: Port Speed 100 Mbps */ + GM_GPCR_AU_DUP_DIS = 1<<2, /* Bit 2: Disable Auto-Update Duplex */ + GM_GPCR_AU_FCT_DIS = 1<<1, /* Bit 1: Disable Auto-Update Flow-C. */ + GM_GPCR_AU_SPD_DIS = 1<<0, /* Bit 0: Disable Auto-Update Speed */ +}; + +#define GM_GPCR_SPEED_1000 (GM_GPCR_GIGS_ENA | GM_GPCR_SPEED_100) +#define GM_GPCR_AU_ALL_DIS (GM_GPCR_AU_DUP_DIS | GM_GPCR_AU_FCT_DIS|GM_GPCR_AU_SPD_DIS) + +/* GM_TX_CTRL 16 bit r/w Transmit Control Register */ +enum { + GM_TXCR_FORCE_JAM = 1<<15, /* Bit 15: Force Jam / Flow-Control */ + GM_TXCR_CRC_DIS = 1<<14, /* Bit 14: Disable insertion of CRC */ + GM_TXCR_PAD_DIS = 1<<13, /* Bit 13: Disable padding of packets */ + GM_TXCR_COL_THR_MSK = 1<<10, /* Bit 12..10: Collision Threshold */ +}; + +#define TX_COL_THR(x) (((x)<<10) & GM_TXCR_COL_THR_MSK) +#define TX_COL_DEF 0x04 + +/* GM_RX_CTRL 16 bit r/w Receive Control Register */ +enum { + GM_RXCR_UCF_ENA = 1<<15, /* Bit 15: Enable Unicast filtering */ + GM_RXCR_MCF_ENA = 1<<14, /* Bit 14: Enable Multicast filtering */ + GM_RXCR_CRC_DIS = 1<<13, /* Bit 13: Remove 4-byte CRC */ + GM_RXCR_PASS_FC = 1<<12, /* Bit 12: Pass FC packets to FIFO */ +}; + +/* GM_TX_PARAM 16 bit r/w Transmit Parameter Register */ +enum { + GM_TXPA_JAMLEN_MSK = 0x03<<14, /* Bit 15..14: Jam Length */ + GM_TXPA_JAMIPG_MSK = 0x1f<<9, /* Bit 13..9: Jam IPG */ + GM_TXPA_JAMDAT_MSK = 0x1f<<4, /* Bit 8..4: IPG Jam to Data */ + + TX_JAM_LEN_DEF = 0x03, + TX_JAM_IPG_DEF = 0x0b, + TX_IPG_JAM_DEF = 0x1c, +}; + +#define TX_JAM_LEN_VAL(x) (((x)<<14) & GM_TXPA_JAMLEN_MSK) +#define TX_JAM_IPG_VAL(x) (((x)<<9) & GM_TXPA_JAMIPG_MSK) +#define TX_IPG_JAM_DATA(x) (((x)<<4) & GM_TXPA_JAMDAT_MSK) + + +/* GM_SERIAL_MODE 16 bit r/w Serial Mode Register */ +enum { + GM_SMOD_DATABL_MSK = 0x1f<<11, /* Bit 15..11: Data Blinder (r/o) */ + GM_SMOD_LIMIT_4 = 1<<10, /* Bit 10: 4 consecutive Tx trials */ + GM_SMOD_VLAN_ENA = 1<<9, /* Bit 9: Enable VLAN (Max. Frame Len) */ + GM_SMOD_JUMBO_ENA = 1<<8, /* Bit 8: Enable Jumbo (Max. Frame Len) */ + GM_SMOD_IPG_MSK = 0x1f /* Bit 4..0: Inter-Packet Gap (IPG) */ +}; + +#define DATA_BLIND_VAL(x) (((x)<<11) & GM_SMOD_DATABL_MSK) +#define DATA_BLIND_DEF 0x04 + +#define IPG_DATA_VAL(x) (x & GM_SMOD_IPG_MSK) +#define IPG_DATA_DEF 0x1e + +/* GM_SMI_CTRL 16 bit r/w SMI Control Register */ +enum { + GM_SMI_CT_PHY_A_MSK = 0x1f<<11,/* Bit 15..11: PHY Device Address */ + GM_SMI_CT_REG_A_MSK = 0x1f<<6,/* Bit 10.. 6: PHY Register Address */ + GM_SMI_CT_OP_RD = 1<<5, /* Bit 5: OpCode Read (0=Write)*/ + GM_SMI_CT_RD_VAL = 1<<4, /* Bit 4: Read Valid (Read completed) */ + GM_SMI_CT_BUSY = 1<<3, /* Bit 3: Busy (Operation in progress) */ +}; + +#define GM_SMI_CT_PHY_AD(x) (((x)<<11) & GM_SMI_CT_PHY_A_MSK) +#define GM_SMI_CT_REG_AD(x) (((x)<<6) & GM_SMI_CT_REG_A_MSK) + +/* GM_PHY_ADDR 16 bit r/w GPHY Address Register */ +enum { + GM_PAR_MIB_CLR = 1<<5, /* Bit 5: Set MIB Clear Counter Mode */ + GM_PAR_MIB_TST = 1<<4, /* Bit 4: MIB Load Counter (Test Mode) */ +}; + +/* Receive Frame Status Encoding */ +enum { + GMR_FS_LEN = 0xffff<<16, /* Bit 31..16: Rx Frame Length */ + GMR_FS_VLAN = 1<<13, /* Bit 13: VLAN Packet */ + GMR_FS_JABBER = 1<<12, /* Bit 12: Jabber Packet */ + GMR_FS_UN_SIZE = 1<<11, /* Bit 11: Undersize Packet */ + GMR_FS_MC = 1<<10, /* Bit 10: Multicast Packet */ + GMR_FS_BC = 1<<9, /* Bit 9: Broadcast Packet */ + GMR_FS_RX_OK = 1<<8, /* Bit 8: Receive OK (Good Packet) */ + GMR_FS_GOOD_FC = 1<<7, /* Bit 7: Good Flow-Control Packet */ + GMR_FS_BAD_FC = 1<<6, /* Bit 6: Bad Flow-Control Packet */ + GMR_FS_MII_ERR = 1<<5, /* Bit 5: MII Error */ + GMR_FS_LONG_ERR = 1<<4, /* Bit 4: Too Long Packet */ + GMR_FS_FRAGMENT = 1<<3, /* Bit 3: Fragment */ + + GMR_FS_CRC_ERR = 1<<1, /* Bit 1: CRC Error */ + GMR_FS_RX_FF_OV = 1<<0, /* Bit 0: Rx FIFO Overflow */ + +/* + * GMR_FS_ANY_ERR (analogous to XMR_FS_ANY_ERR) + */ + GMR_FS_ANY_ERR = GMR_FS_CRC_ERR | GMR_FS_LONG_ERR | + GMR_FS_MII_ERR | GMR_FS_BAD_FC | GMR_FS_GOOD_FC | + GMR_FS_JABBER, +/* Rx GMAC FIFO Flush Mask (default) */ + RX_FF_FL_DEF_MSK = GMR_FS_CRC_ERR | GMR_FS_RX_FF_OV |GMR_FS_MII_ERR | + GMR_FS_BAD_FC | GMR_FS_GOOD_FC | GMR_FS_UN_SIZE | + GMR_FS_JABBER, +}; + +/* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ +enum { + GMF_WP_TST_ON = 1<<14, /* Write Pointer Test On */ + GMF_WP_TST_OFF = 1<<13, /* Write Pointer Test Off */ + GMF_WP_STEP = 1<<12, /* Write Pointer Step/Increment */ + + GMF_RP_TST_ON = 1<<10, /* Read Pointer Test On */ + GMF_RP_TST_OFF = 1<<9, /* Read Pointer Test Off */ + GMF_RP_STEP = 1<<8, /* Read Pointer Step/Increment */ + GMF_RX_F_FL_ON = 1<<7, /* Rx FIFO Flush Mode On */ + GMF_RX_F_FL_OFF = 1<<6, /* Rx FIFO Flush Mode Off */ + GMF_CLI_RX_FO = 1<<5, /* Clear IRQ Rx FIFO Overrun */ + GMF_CLI_RX_FC = 1<<4, /* Clear IRQ Rx Frame Complete */ + GMF_OPER_ON = 1<<3, /* Operational Mode On */ + GMF_OPER_OFF = 1<<2, /* Operational Mode Off */ + GMF_RST_CLR = 1<<1, /* Clear GMAC FIFO Reset */ + GMF_RST_SET = 1<<0, /* Set GMAC FIFO Reset */ + + RX_GMF_FL_THR_DEF = 0xa, /* flush threshold (default) */ +}; + + +/* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test */ +enum { + GMF_WSP_TST_ON = 1<<18,/* Write Shadow Pointer Test On */ + GMF_WSP_TST_OFF = 1<<17,/* Write Shadow Pointer Test Off */ + GMF_WSP_STEP = 1<<16,/* Write Shadow Pointer Step/Increment */ + + GMF_CLI_TX_FU = 1<<6, /* Clear IRQ Tx FIFO Underrun */ + GMF_CLI_TX_FC = 1<<5, /* Clear IRQ Tx Frame Complete */ + GMF_CLI_TX_PE = 1<<4, /* Clear IRQ Tx Parity Error */ +}; + +/* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ +enum { + GMT_ST_START = 1<<2, /* Start Time Stamp Timer */ + GMT_ST_STOP = 1<<1, /* Stop Time Stamp Timer */ + GMT_ST_CLR_IRQ = 1<<0, /* Clear Time Stamp Timer IRQ */ +}; + +/* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ +enum { + GMC_H_BURST_ON = 1<<7, /* Half Duplex Burst Mode On */ + GMC_H_BURST_OFF = 1<<6, /* Half Duplex Burst Mode Off */ + GMC_F_LOOPB_ON = 1<<5, /* FIFO Loopback On */ + GMC_F_LOOPB_OFF = 1<<4, /* FIFO Loopback Off */ + GMC_PAUSE_ON = 1<<3, /* Pause On */ + GMC_PAUSE_OFF = 1<<2, /* Pause Off */ + GMC_RST_CLR = 1<<1, /* Clear GMAC Reset */ + GMC_RST_SET = 1<<0, /* Set GMAC Reset */ +}; + +/* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ +enum { + GPC_SEL_BDT = 1<<28, /* Select Bi-Dir. Transfer for MDC/MDIO */ + GPC_INT_POL_HI = 1<<27, /* IRQ Polarity is Active HIGH */ + GPC_75_OHM = 1<<26, /* Use 75 Ohm Termination instead of 50 */ + GPC_DIS_FC = 1<<25, /* Disable Automatic Fiber/Copper Detection */ + GPC_DIS_SLEEP = 1<<24, /* Disable Energy Detect */ + GPC_HWCFG_M_3 = 1<<23, /* HWCFG_MODE[3] */ + GPC_HWCFG_M_2 = 1<<22, /* HWCFG_MODE[2] */ + GPC_HWCFG_M_1 = 1<<21, /* HWCFG_MODE[1] */ + GPC_HWCFG_M_0 = 1<<20, /* HWCFG_MODE[0] */ + GPC_ANEG_0 = 1<<19, /* ANEG[0] */ + GPC_ENA_XC = 1<<18, /* Enable MDI crossover */ + GPC_DIS_125 = 1<<17, /* Disable 125 MHz clock */ + GPC_ANEG_3 = 1<<16, /* ANEG[3] */ + GPC_ANEG_2 = 1<<15, /* ANEG[2] */ + GPC_ANEG_1 = 1<<14, /* ANEG[1] */ + GPC_ENA_PAUSE = 1<<13, /* Enable Pause (SYM_OR_REM) */ + GPC_PHYADDR_4 = 1<<12, /* Bit 4 of Phy Addr */ + GPC_PHYADDR_3 = 1<<11, /* Bit 3 of Phy Addr */ + GPC_PHYADDR_2 = 1<<10, /* Bit 2 of Phy Addr */ + GPC_PHYADDR_1 = 1<<9, /* Bit 1 of Phy Addr */ + GPC_PHYADDR_0 = 1<<8, /* Bit 0 of Phy Addr */ + /* Bits 7..2: reserved */ + GPC_RST_CLR = 1<<1, /* Clear GPHY Reset */ + GPC_RST_SET = 1<<0, /* Set GPHY Reset */ +}; + +#define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3|GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0) +#define GPC_HWCFG_GMII_FIB (GPC_HWCFG_M_2 | GPC_HWCFG_M_1 | GPC_HWCFG_M_0) +#define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | GPC_ANEG_1 | GPC_ANEG_0) + +/* forced speed and duplex mode (don't mix with other ANEG bits) */ +#define GPC_FRC10MBIT_HALF 0 +#define GPC_FRC10MBIT_FULL GPC_ANEG_0 +#define GPC_FRC100MBIT_HALF GPC_ANEG_1 +#define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) + +/* auto-negotiation with limited advertised speeds */ +/* mix only with master/slave settings (for copper) */ +#define GPC_ADV_1000_HALF GPC_ANEG_2 +#define GPC_ADV_1000_FULL GPC_ANEG_3 +#define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) + +/* master/slave settings */ +/* only for copper with 1000 Mbps */ +#define GPC_FORCE_MASTER 0 +#define GPC_FORCE_SLAVE GPC_ANEG_0 +#define GPC_PREF_MASTER GPC_ANEG_1 +#define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) + +/* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ +/* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ +enum { + GM_IS_TX_CO_OV = 1<<5, /* Transmit Counter Overflow IRQ */ + GM_IS_RX_CO_OV = 1<<4, /* Receive Counter Overflow IRQ */ + GM_IS_TX_FF_UR = 1<<3, /* Transmit FIFO Underrun */ + GM_IS_TX_COMPL = 1<<2, /* Frame Transmission Complete */ + GM_IS_RX_FF_OR = 1<<1, /* Receive FIFO Overrun */ + GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */ + +#define GMAC_DEF_MSK (GM_IS_TX_CO_OV | GM_IS_RX_CO_OV | GM_IS_TX_FF_UR) + +/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */ + /* Bits 15.. 2: reserved */ + GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */ + GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */ + + +/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ + WOL_CTL_LINK_CHG_OCC = 1<<15, + WOL_CTL_MAGIC_PKT_OCC = 1<<14, + WOL_CTL_PATTERN_OCC = 1<<13, + WOL_CTL_CLEAR_RESULT = 1<<12, + WOL_CTL_ENA_PME_ON_LINK_CHG = 1<<11, + WOL_CTL_DIS_PME_ON_LINK_CHG = 1<<10, + WOL_CTL_ENA_PME_ON_MAGIC_PKT = 1<<9, + WOL_CTL_DIS_PME_ON_MAGIC_PKT = 1<<8, + WOL_CTL_ENA_PME_ON_PATTERN = 1<<7, + WOL_CTL_DIS_PME_ON_PATTERN = 1<<6, + WOL_CTL_ENA_LINK_CHG_UNIT = 1<<5, + WOL_CTL_DIS_LINK_CHG_UNIT = 1<<4, + WOL_CTL_ENA_MAGIC_PKT_UNIT = 1<<3, + WOL_CTL_DIS_MAGIC_PKT_UNIT = 1<<2, + WOL_CTL_ENA_PATTERN_UNIT = 1<<1, + WOL_CTL_DIS_PATTERN_UNIT = 1<<0, +}; + +#define WOL_CTL_DEFAULT \ + (WOL_CTL_DIS_PME_ON_LINK_CHG | \ + WOL_CTL_DIS_PME_ON_PATTERN | \ + WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ + WOL_CTL_DIS_LINK_CHG_UNIT | \ + WOL_CTL_DIS_PATTERN_UNIT | \ + WOL_CTL_DIS_MAGIC_PKT_UNIT) + +/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ +#define WOL_CTL_PATT_ENA(x) (1 << (x)) + + +/* XMAC II registers */ +enum { + XM_MMU_CMD = 0x0000, /* 16 bit r/w MMU Command Register */ + XM_POFF = 0x0008, /* 32 bit r/w Packet Offset Register */ + XM_BURST = 0x000c, /* 32 bit r/w Burst Register for half duplex*/ + XM_1L_VLAN_TAG = 0x0010, /* 16 bit r/w One Level VLAN Tag ID */ + XM_2L_VLAN_TAG = 0x0014, /* 16 bit r/w Two Level VLAN Tag ID */ + XM_TX_CMD = 0x0020, /* 16 bit r/w Transmit Command Register */ + XM_TX_RT_LIM = 0x0024, /* 16 bit r/w Transmit Retry Limit Register */ + XM_TX_STIME = 0x0028, /* 16 bit r/w Transmit Slottime Register */ + XM_TX_IPG = 0x002c, /* 16 bit r/w Transmit Inter Packet Gap */ + XM_RX_CMD = 0x0030, /* 16 bit r/w Receive Command Register */ + XM_PHY_ADDR = 0x0034, /* 16 bit r/w PHY Address Register */ + XM_PHY_DATA = 0x0038, /* 16 bit r/w PHY Data Register */ + XM_GP_PORT = 0x0040, /* 32 bit r/w General Purpose Port Register */ + XM_IMSK = 0x0044, /* 16 bit r/w Interrupt Mask Register */ + XM_ISRC = 0x0048, /* 16 bit r/o Interrupt Status Register */ + XM_HW_CFG = 0x004c, /* 16 bit r/w Hardware Config Register */ + XM_TX_LO_WM = 0x0060, /* 16 bit r/w Tx FIFO Low Water Mark */ + XM_TX_HI_WM = 0x0062, /* 16 bit r/w Tx FIFO High Water Mark */ + XM_TX_THR = 0x0064, /* 16 bit r/w Tx Request Threshold */ + XM_HT_THR = 0x0066, /* 16 bit r/w Host Request Threshold */ + XM_PAUSE_DA = 0x0068, /* NA reg r/w Pause Destination Address */ + XM_CTL_PARA = 0x0070, /* 32 bit r/w Control Parameter Register */ + XM_MAC_OPCODE = 0x0074, /* 16 bit r/w Opcode for MAC control frames */ + XM_MAC_PTIME = 0x0076, /* 16 bit r/w Pause time for MAC ctrl frames*/ + XM_TX_STAT = 0x0078, /* 32 bit r/o Tx Status LIFO Register */ + + XM_EXM_START = 0x0080, /* r/w Start Address of the EXM Regs */ +#define XM_EXM(reg) (XM_EXM_START + ((reg) << 3)) +}; + +enum { + XM_SRC_CHK = 0x0100, /* NA reg r/w Source Check Address Register */ + XM_SA = 0x0108, /* NA reg r/w Station Address Register */ + XM_HSM = 0x0110, /* 64 bit r/w Hash Match Address Registers */ + XM_RX_LO_WM = 0x0118, /* 16 bit r/w Receive Low Water Mark */ + XM_RX_HI_WM = 0x011a, /* 16 bit r/w Receive High Water Mark */ + XM_RX_THR = 0x011c, /* 32 bit r/w Receive Request Threshold */ + XM_DEV_ID = 0x0120, /* 32 bit r/o Device ID Register */ + XM_MODE = 0x0124, /* 32 bit r/w Mode Register */ + XM_LSA = 0x0128, /* NA reg r/o Last Source Register */ + XM_TS_READ = 0x0130, /* 32 bit r/o Time Stamp Read Register */ + XM_TS_LOAD = 0x0134, /* 32 bit r/o Time Stamp Load Value */ + XM_STAT_CMD = 0x0200, /* 16 bit r/w Statistics Command Register */ + XM_RX_CNT_EV = 0x0204, /* 32 bit r/o Rx Counter Event Register */ + XM_TX_CNT_EV = 0x0208, /* 32 bit r/o Tx Counter Event Register */ + XM_RX_EV_MSK = 0x020c, /* 32 bit r/w Rx Counter Event Mask */ + XM_TX_EV_MSK = 0x0210, /* 32 bit r/w Tx Counter Event Mask */ + XM_TXF_OK = 0x0280, /* 32 bit r/o Frames Transmitted OK Conuter */ + XM_TXO_OK_HI = 0x0284, /* 32 bit r/o Octets Transmitted OK High Cnt*/ + XM_TXO_OK_LO = 0x0288, /* 32 bit r/o Octets Transmitted OK Low Cnt */ + XM_TXF_BC_OK = 0x028c, /* 32 bit r/o Broadcast Frames Xmitted OK */ + XM_TXF_MC_OK = 0x0290, /* 32 bit r/o Multicast Frames Xmitted OK */ + XM_TXF_UC_OK = 0x0294, /* 32 bit r/o Unicast Frames Xmitted OK */ + XM_TXF_LONG = 0x0298, /* 32 bit r/o Tx Long Frame Counter */ + XM_TXE_BURST = 0x029c, /* 32 bit r/o Tx Burst Event Counter */ + XM_TXF_MPAUSE = 0x02a0, /* 32 bit r/o Tx Pause MAC Ctrl Frame Cnt */ + XM_TXF_MCTRL = 0x02a4, /* 32 bit r/o Tx MAC Ctrl Frame Counter */ + XM_TXF_SNG_COL = 0x02a8, /* 32 bit r/o Tx Single Collision Counter */ + XM_TXF_MUL_COL = 0x02ac, /* 32 bit r/o Tx Multiple Collision Counter */ + XM_TXF_ABO_COL = 0x02b0, /* 32 bit r/o Tx aborted due to Exces. Col. */ + XM_TXF_LAT_COL = 0x02b4, /* 32 bit r/o Tx Late Collision Counter */ + XM_TXF_DEF = 0x02b8, /* 32 bit r/o Tx Deferred Frame Counter */ + XM_TXF_EX_DEF = 0x02bc, /* 32 bit r/o Tx Excessive Deferall Counter */ + XM_TXE_FIFO_UR = 0x02c0, /* 32 bit r/o Tx FIFO Underrun Event Cnt */ + XM_TXE_CS_ERR = 0x02c4, /* 32 bit r/o Tx Carrier Sense Error Cnt */ + XM_TXP_UTIL = 0x02c8, /* 32 bit r/o Tx Utilization in % */ + XM_TXF_64B = 0x02d0, /* 32 bit r/o 64 Byte Tx Frame Counter */ + XM_TXF_127B = 0x02d4, /* 32 bit r/o 65-127 Byte Tx Frame Counter */ + XM_TXF_255B = 0x02d8, /* 32 bit r/o 128-255 Byte Tx Frame Counter */ + XM_TXF_511B = 0x02dc, /* 32 bit r/o 256-511 Byte Tx Frame Counter */ + XM_TXF_1023B = 0x02e0, /* 32 bit r/o 512-1023 Byte Tx Frame Counter*/ + XM_TXF_MAX_SZ = 0x02e4, /* 32 bit r/o 1024-MaxSize Byte Tx Frame Cnt*/ + XM_RXF_OK = 0x0300, /* 32 bit r/o Frames Received OK */ + XM_RXO_OK_HI = 0x0304, /* 32 bit r/o Octets Received OK High Cnt */ + XM_RXO_OK_LO = 0x0308, /* 32 bit r/o Octets Received OK Low Counter*/ + XM_RXF_BC_OK = 0x030c, /* 32 bit r/o Broadcast Frames Received OK */ + XM_RXF_MC_OK = 0x0310, /* 32 bit r/o Multicast Frames Received OK */ + XM_RXF_UC_OK = 0x0314, /* 32 bit r/o Unicast Frames Received OK */ + XM_RXF_MPAUSE = 0x0318, /* 32 bit r/o Rx Pause MAC Ctrl Frame Cnt */ + XM_RXF_MCTRL = 0x031c, /* 32 bit r/o Rx MAC Ctrl Frame Counter */ + XM_RXF_INV_MP = 0x0320, /* 32 bit r/o Rx invalid Pause Frame Cnt */ + XM_RXF_INV_MOC = 0x0324, /* 32 bit r/o Rx Frames with inv. MAC Opcode*/ + XM_RXE_BURST = 0x0328, /* 32 bit r/o Rx Burst Event Counter */ + XM_RXE_FMISS = 0x032c, /* 32 bit r/o Rx Missed Frames Event Cnt */ + XM_RXF_FRA_ERR = 0x0330, /* 32 bit r/o Rx Framing Error Counter */ + XM_RXE_FIFO_OV = 0x0334, /* 32 bit r/o Rx FIFO overflow Event Cnt */ + XM_RXF_JAB_PKT = 0x0338, /* 32 bit r/o Rx Jabber Packet Frame Cnt */ + XM_RXE_CAR_ERR = 0x033c, /* 32 bit r/o Rx Carrier Event Error Cnt */ + XM_RXF_LEN_ERR = 0x0340, /* 32 bit r/o Rx in Range Length Error */ + XM_RXE_SYM_ERR = 0x0344, /* 32 bit r/o Rx Symbol Error Counter */ + XM_RXE_SHT_ERR = 0x0348, /* 32 bit r/o Rx Short Event Error Cnt */ + XM_RXE_RUNT = 0x034c, /* 32 bit r/o Rx Runt Event Counter */ + XM_RXF_LNG_ERR = 0x0350, /* 32 bit r/o Rx Frame too Long Error Cnt */ + XM_RXF_FCS_ERR = 0x0354, /* 32 bit r/o Rx Frame Check Seq. Error Cnt */ + XM_RXF_CEX_ERR = 0x035c, /* 32 bit r/o Rx Carrier Ext Error Frame Cnt*/ + XM_RXP_UTIL = 0x0360, /* 32 bit r/o Rx Utilization in % */ + XM_RXF_64B = 0x0368, /* 32 bit r/o 64 Byte Rx Frame Counter */ + XM_RXF_127B = 0x036c, /* 32 bit r/o 65-127 Byte Rx Frame Counter */ + XM_RXF_255B = 0x0370, /* 32 bit r/o 128-255 Byte Rx Frame Counter */ + XM_RXF_511B = 0x0374, /* 32 bit r/o 256-511 Byte Rx Frame Counter */ + XM_RXF_1023B = 0x0378, /* 32 bit r/o 512-1023 Byte Rx Frame Counter*/ + XM_RXF_MAX_SZ = 0x037c, /* 32 bit r/o 1024-MaxSize Byte Rx Frame Cnt*/ +}; + +/* XM_MMU_CMD 16 bit r/w MMU Command Register */ +enum { + XM_MMU_PHY_RDY = 1<<12,/* Bit 12: PHY Read Ready */ + XM_MMU_PHY_BUSY = 1<<11,/* Bit 11: PHY Busy */ + XM_MMU_IGN_PF = 1<<10,/* Bit 10: Ignore Pause Frame */ + XM_MMU_MAC_LB = 1<<9, /* Bit 9: Enable MAC Loopback */ + XM_MMU_FRC_COL = 1<<7, /* Bit 7: Force Collision */ + XM_MMU_SIM_COL = 1<<6, /* Bit 6: Simulate Collision */ + XM_MMU_NO_PRE = 1<<5, /* Bit 5: No MDIO Preamble */ + XM_MMU_GMII_FD = 1<<4, /* Bit 4: GMII uses Full Duplex */ + XM_MMU_RAT_CTRL = 1<<3, /* Bit 3: Enable Rate Control */ + XM_MMU_GMII_LOOP= 1<<2, /* Bit 2: PHY is in Loopback Mode */ + XM_MMU_ENA_RX = 1<<1, /* Bit 1: Enable Receiver */ + XM_MMU_ENA_TX = 1<<0, /* Bit 0: Enable Transmitter */ +}; + + +/* XM_TX_CMD 16 bit r/w Transmit Command Register */ +enum { + XM_TX_BK2BK = 1<<6, /* Bit 6: Ignor Carrier Sense (Tx Bk2Bk)*/ + XM_TX_ENC_BYP = 1<<5, /* Bit 5: Set Encoder in Bypass Mode */ + XM_TX_SAM_LINE = 1<<4, /* Bit 4: (sc) Start utilization calculation */ + XM_TX_NO_GIG_MD = 1<<3, /* Bit 3: Disable Carrier Extension */ + XM_TX_NO_PRE = 1<<2, /* Bit 2: Disable Preamble Generation */ + XM_TX_NO_CRC = 1<<1, /* Bit 1: Disable CRC Generation */ + XM_TX_AUTO_PAD = 1<<0, /* Bit 0: Enable Automatic Padding */ +}; + +/* XM_TX_RT_LIM 16 bit r/w Transmit Retry Limit Register */ +#define XM_RT_LIM_MSK 0x1f /* Bit 4..0: Tx Retry Limit */ + + +/* XM_TX_STIME 16 bit r/w Transmit Slottime Register */ +#define XM_STIME_MSK 0x7f /* Bit 6..0: Tx Slottime bits */ + + +/* XM_TX_IPG 16 bit r/w Transmit Inter Packet Gap */ +#define XM_IPG_MSK 0xff /* Bit 7..0: IPG value bits */ + + +/* XM_RX_CMD 16 bit r/w Receive Command Register */ +enum { + XM_RX_LENERR_OK = 1<<8, /* Bit 8 don't set Rx Err bit for */ + /* inrange error packets */ + XM_RX_BIG_PK_OK = 1<<7, /* Bit 7 don't set Rx Err bit for */ + /* jumbo packets */ + XM_RX_IPG_CAP = 1<<6, /* Bit 6 repl. type field with IPG */ + XM_RX_TP_MD = 1<<5, /* Bit 5: Enable transparent Mode */ + XM_RX_STRIP_FCS = 1<<4, /* Bit 4: Enable FCS Stripping */ + XM_RX_SELF_RX = 1<<3, /* Bit 3: Enable Rx of own packets */ + XM_RX_SAM_LINE = 1<<2, /* Bit 2: (sc) Start utilization calculation */ + XM_RX_STRIP_PAD = 1<<1, /* Bit 1: Strip pad bytes of Rx frames */ + XM_RX_DIS_CEXT = 1<<0, /* Bit 0: Disable carrier ext. check */ +}; + + +/* XM_PHY_ADDR 16 bit r/w PHY Address Register */ +#define XM_PHY_ADDR_SZ 0x1f /* Bit 4..0: PHY Address bits */ + + +/* XM_GP_PORT 32 bit r/w General Purpose Port Register */ +enum { + XM_GP_ANIP = 1<<6, /* Bit 6: (ro) Auto-Neg. in progress */ + XM_GP_FRC_INT = 1<<5, /* Bit 5: (sc) Force Interrupt */ + XM_GP_RES_MAC = 1<<3, /* Bit 3: (sc) Reset MAC and FIFOs */ + XM_GP_RES_STAT = 1<<2, /* Bit 2: (sc) Reset the statistics module */ + XM_GP_INP_ASS = 1<<0, /* Bit 0: (ro) GP Input Pin asserted */ +}; + + +/* XM_IMSK 16 bit r/w Interrupt Mask Register */ +/* XM_ISRC 16 bit r/o Interrupt Status Register */ +enum { + XM_IS_LNK_AE = 1<<14, /* Bit 14: Link Asynchronous Event */ + XM_IS_TX_ABORT = 1<<13, /* Bit 13: Transmit Abort, late Col. etc */ + XM_IS_FRC_INT = 1<<12, /* Bit 12: Force INT bit set in GP */ + XM_IS_INP_ASS = 1<<11, /* Bit 11: Input Asserted, GP bit 0 set */ + XM_IS_LIPA_RC = 1<<10, /* Bit 10: Link Partner requests config */ + XM_IS_RX_PAGE = 1<<9, /* Bit 9: Page Received */ + XM_IS_TX_PAGE = 1<<8, /* Bit 8: Next Page Loaded for Transmit */ + XM_IS_AND = 1<<7, /* Bit 7: Auto-Negotiation Done */ + XM_IS_TSC_OV = 1<<6, /* Bit 6: Time Stamp Counter Overflow */ + XM_IS_RXC_OV = 1<<5, /* Bit 5: Rx Counter Event Overflow */ + XM_IS_TXC_OV = 1<<4, /* Bit 4: Tx Counter Event Overflow */ + XM_IS_RXF_OV = 1<<3, /* Bit 3: Receive FIFO Overflow */ + XM_IS_TXF_UR = 1<<2, /* Bit 2: Transmit FIFO Underrun */ + XM_IS_TX_COMP = 1<<1, /* Bit 1: Frame Tx Complete */ + XM_IS_RX_COMP = 1<<0, /* Bit 0: Frame Rx Complete */ +}; + +#define XM_DEF_MSK (~(XM_IS_INP_ASS | XM_IS_LIPA_RC | XM_IS_RX_PAGE | \ + XM_IS_AND | XM_IS_RXC_OV | XM_IS_TXC_OV | \ + XM_IS_RXF_OV | XM_IS_TXF_UR)) + + +/* XM_HW_CFG 16 bit r/w Hardware Config Register */ +enum { + XM_HW_GEN_EOP = 1<<3, /* Bit 3: generate End of Packet pulse */ + XM_HW_COM4SIG = 1<<2, /* Bit 2: use Comma Detect for Sig. Det.*/ + XM_HW_GMII_MD = 1<<0, /* Bit 0: GMII Interface selected */ +}; + + +/* XM_TX_LO_WM 16 bit r/w Tx FIFO Low Water Mark */ +/* XM_TX_HI_WM 16 bit r/w Tx FIFO High Water Mark */ +#define XM_TX_WM_MSK 0x01ff /* Bit 9.. 0 Tx FIFO Watermark bits */ + +/* XM_TX_THR 16 bit r/w Tx Request Threshold */ +/* XM_HT_THR 16 bit r/w Host Request Threshold */ +/* XM_RX_THR 16 bit r/w Rx Request Threshold */ +#define XM_THR_MSK 0x03ff /* Bit 10.. 0 Rx/Tx Request Threshold bits */ + + +/* XM_TX_STAT 32 bit r/o Tx Status LIFO Register */ +enum { + XM_ST_VALID = (1UL<<31), /* Bit 31: Status Valid */ + XM_ST_BYTE_CNT = (0x3fffL<<17), /* Bit 30..17: Tx frame Length */ + XM_ST_RETRY_CNT = (0x1fL<<12), /* Bit 16..12: Retry Count */ + XM_ST_EX_COL = 1<<11, /* Bit 11: Excessive Collisions */ + XM_ST_EX_DEF = 1<<10, /* Bit 10: Excessive Deferral */ + XM_ST_BURST = 1<<9, /* Bit 9: p. xmitted in burst md*/ + XM_ST_DEFER = 1<<8, /* Bit 8: packet was defered */ + XM_ST_BC = 1<<7, /* Bit 7: Broadcast packet */ + XM_ST_MC = 1<<6, /* Bit 6: Multicast packet */ + XM_ST_UC = 1<<5, /* Bit 5: Unicast packet */ + XM_ST_TX_UR = 1<<4, /* Bit 4: FIFO Underrun occured */ + XM_ST_CS_ERR = 1<<3, /* Bit 3: Carrier Sense Error */ + XM_ST_LAT_COL = 1<<2, /* Bit 2: Late Collision Error */ + XM_ST_MUL_COL = 1<<1, /* Bit 1: Multiple Collisions */ + XM_ST_SGN_COL = 1<<0, /* Bit 0: Single Collision */ +}; + +/* XM_RX_LO_WM 16 bit r/w Receive Low Water Mark */ +/* XM_RX_HI_WM 16 bit r/w Receive High Water Mark */ +#define XM_RX_WM_MSK 0x03ff /* Bit 11.. 0: Rx FIFO Watermark bits */ + + +/* XM_DEV_ID 32 bit r/o Device ID Register */ +#define XM_DEV_OUI (0x00ffffffUL<<8) /* Bit 31..8: Device OUI */ +#define XM_DEV_REV (0x07L << 5) /* Bit 7..5: Chip Rev Num */ + + +/* XM_MODE 32 bit r/w Mode Register */ +enum { + XM_MD_ENA_REJ = 1<<26, /* Bit 26: Enable Frame Reject */ + XM_MD_SPOE_E = 1<<25, /* Bit 25: Send Pause on Edge */ + /* extern generated */ + XM_MD_TX_REP = 1<<24, /* Bit 24: Transmit Repeater Mode */ + XM_MD_SPOFF_I = 1<<23, /* Bit 23: Send Pause on FIFO full */ + /* intern generated */ + XM_MD_LE_STW = 1<<22, /* Bit 22: Rx Stat Word in Little Endian */ + XM_MD_TX_CONT = 1<<21, /* Bit 21: Send Continuous */ + XM_MD_TX_PAUSE = 1<<20, /* Bit 20: (sc) Send Pause Frame */ + XM_MD_ATS = 1<<19, /* Bit 19: Append Time Stamp */ + XM_MD_SPOL_I = 1<<18, /* Bit 18: Send Pause on Low */ + /* intern generated */ + XM_MD_SPOH_I = 1<<17, /* Bit 17: Send Pause on High */ + /* intern generated */ + XM_MD_CAP = 1<<16, /* Bit 16: Check Address Pair */ + XM_MD_ENA_HASH = 1<<15, /* Bit 15: Enable Hashing */ + XM_MD_CSA = 1<<14, /* Bit 14: Check Station Address */ + XM_MD_CAA = 1<<13, /* Bit 13: Check Address Array */ + XM_MD_RX_MCTRL = 1<<12, /* Bit 12: Rx MAC Control Frame */ + XM_MD_RX_RUNT = 1<<11, /* Bit 11: Rx Runt Frames */ + XM_MD_RX_IRLE = 1<<10, /* Bit 10: Rx in Range Len Err Frame */ + XM_MD_RX_LONG = 1<<9, /* Bit 9: Rx Long Frame */ + XM_MD_RX_CRCE = 1<<8, /* Bit 8: Rx CRC Error Frame */ + XM_MD_RX_ERR = 1<<7, /* Bit 7: Rx Error Frame */ + XM_MD_DIS_UC = 1<<6, /* Bit 6: Disable Rx Unicast */ + XM_MD_DIS_MC = 1<<5, /* Bit 5: Disable Rx Multicast */ + XM_MD_DIS_BC = 1<<4, /* Bit 4: Disable Rx Broadcast */ + XM_MD_ENA_PROM = 1<<3, /* Bit 3: Enable Promiscuous */ + XM_MD_ENA_BE = 1<<2, /* Bit 2: Enable Big Endian */ + XM_MD_FTF = 1<<1, /* Bit 1: (sc) Flush Tx FIFO */ + XM_MD_FRF = 1<<0, /* Bit 0: (sc) Flush Rx FIFO */ +}; + +#define XM_PAUSE_MODE (XM_MD_SPOE_E | XM_MD_SPOL_I | XM_MD_SPOH_I) +#define XM_DEF_MODE (XM_MD_RX_RUNT | XM_MD_RX_IRLE | XM_MD_RX_LONG |\ + XM_MD_RX_CRCE | XM_MD_RX_ERR | XM_MD_CSA | XM_MD_CAA) + +/* XM_STAT_CMD 16 bit r/w Statistics Command Register */ +enum { + XM_SC_SNP_RXC = 1<<5, /* Bit 5: (sc) Snap Rx Counters */ + XM_SC_SNP_TXC = 1<<4, /* Bit 4: (sc) Snap Tx Counters */ + XM_SC_CP_RXC = 1<<3, /* Bit 3: Copy Rx Counters Continuously */ + XM_SC_CP_TXC = 1<<2, /* Bit 2: Copy Tx Counters Continuously */ + XM_SC_CLR_RXC = 1<<1, /* Bit 1: (sc) Clear Rx Counters */ + XM_SC_CLR_TXC = 1<<0, /* Bit 0: (sc) Clear Tx Counters */ +}; + + +/* XM_RX_CNT_EV 32 bit r/o Rx Counter Event Register */ +/* XM_RX_EV_MSK 32 bit r/w Rx Counter Event Mask */ +enum { + XMR_MAX_SZ_OV = 1<<31, /* Bit 31: 1024-MaxSize Rx Cnt Ov*/ + XMR_1023B_OV = 1<<30, /* Bit 30: 512-1023Byte Rx Cnt Ov*/ + XMR_511B_OV = 1<<29, /* Bit 29: 256-511 Byte Rx Cnt Ov*/ + XMR_255B_OV = 1<<28, /* Bit 28: 128-255 Byte Rx Cnt Ov*/ + XMR_127B_OV = 1<<27, /* Bit 27: 65-127 Byte Rx Cnt Ov */ + XMR_64B_OV = 1<<26, /* Bit 26: 64 Byte Rx Cnt Ov */ + XMR_UTIL_OV = 1<<25, /* Bit 25: Rx Util Cnt Overflow */ + XMR_UTIL_UR = 1<<24, /* Bit 24: Rx Util Cnt Underrun */ + XMR_CEX_ERR_OV = 1<<23, /* Bit 23: CEXT Err Cnt Ov */ + XMR_FCS_ERR_OV = 1<<21, /* Bit 21: Rx FCS Error Cnt Ov */ + XMR_LNG_ERR_OV = 1<<20, /* Bit 20: Rx too Long Err Cnt Ov*/ + XMR_RUNT_OV = 1<<19, /* Bit 19: Runt Event Cnt Ov */ + XMR_SHT_ERR_OV = 1<<18, /* Bit 18: Rx Short Ev Err Cnt Ov*/ + XMR_SYM_ERR_OV = 1<<17, /* Bit 17: Rx Sym Err Cnt Ov */ + XMR_CAR_ERR_OV = 1<<15, /* Bit 15: Rx Carr Ev Err Cnt Ov */ + XMR_JAB_PKT_OV = 1<<14, /* Bit 14: Rx Jabb Packet Cnt Ov */ + XMR_FIFO_OV = 1<<13, /* Bit 13: Rx FIFO Ov Ev Cnt Ov */ + XMR_FRA_ERR_OV = 1<<12, /* Bit 12: Rx Framing Err Cnt Ov */ + XMR_FMISS_OV = 1<<11, /* Bit 11: Rx Missed Ev Cnt Ov */ + XMR_BURST = 1<<10, /* Bit 10: Rx Burst Event Cnt Ov */ + XMR_INV_MOC = 1<<9, /* Bit 9: Rx with inv. MAC OC Ov*/ + XMR_INV_MP = 1<<8, /* Bit 8: Rx inv Pause Frame Ov */ + XMR_MCTRL_OV = 1<<7, /* Bit 7: Rx MAC Ctrl-F Cnt Ov */ + XMR_MPAUSE_OV = 1<<6, /* Bit 6: Rx Pause MAC Ctrl-F Ov*/ + XMR_UC_OK_OV = 1<<5, /* Bit 5: Rx Unicast Frame CntOv*/ + XMR_MC_OK_OV = 1<<4, /* Bit 4: Rx Multicast Cnt Ov */ + XMR_BC_OK_OV = 1<<3, /* Bit 3: Rx Broadcast Cnt Ov */ + XMR_OK_LO_OV = 1<<2, /* Bit 2: Octets Rx OK Low CntOv*/ + XMR_OK_HI_OV = 1<<1, /* Bit 1: Octets Rx OK Hi Cnt Ov*/ + XMR_OK_OV = 1<<0, /* Bit 0: Frames Received Ok Ov */ +}; + +#define XMR_DEF_MSK (XMR_OK_LO_OV | XMR_OK_HI_OV) + +/* XM_TX_CNT_EV 32 bit r/o Tx Counter Event Register */ +/* XM_TX_EV_MSK 32 bit r/w Tx Counter Event Mask */ +enum { + XMT_MAX_SZ_OV = 1<<25, /* Bit 25: 1024-MaxSize Tx Cnt Ov*/ + XMT_1023B_OV = 1<<24, /* Bit 24: 512-1023Byte Tx Cnt Ov*/ + XMT_511B_OV = 1<<23, /* Bit 23: 256-511 Byte Tx Cnt Ov*/ + XMT_255B_OV = 1<<22, /* Bit 22: 128-255 Byte Tx Cnt Ov*/ + XMT_127B_OV = 1<<21, /* Bit 21: 65-127 Byte Tx Cnt Ov */ + XMT_64B_OV = 1<<20, /* Bit 20: 64 Byte Tx Cnt Ov */ + XMT_UTIL_OV = 1<<19, /* Bit 19: Tx Util Cnt Overflow */ + XMT_UTIL_UR = 1<<18, /* Bit 18: Tx Util Cnt Underrun */ + XMT_CS_ERR_OV = 1<<17, /* Bit 17: Tx Carr Sen Err Cnt Ov*/ + XMT_FIFO_UR_OV = 1<<16, /* Bit 16: Tx FIFO Ur Ev Cnt Ov */ + XMT_EX_DEF_OV = 1<<15, /* Bit 15: Tx Ex Deferall Cnt Ov */ + XMT_DEF = 1<<14, /* Bit 14: Tx Deferred Cnt Ov */ + XMT_LAT_COL_OV = 1<<13, /* Bit 13: Tx Late Col Cnt Ov */ + XMT_ABO_COL_OV = 1<<12, /* Bit 12: Tx abo dueto Ex Col Ov*/ + XMT_MUL_COL_OV = 1<<11, /* Bit 11: Tx Mult Col Cnt Ov */ + XMT_SNG_COL = 1<<10, /* Bit 10: Tx Single Col Cnt Ov */ + XMT_MCTRL_OV = 1<<9, /* Bit 9: Tx MAC Ctrl Counter Ov*/ + XMT_MPAUSE = 1<<8, /* Bit 8: Tx Pause MAC Ctrl-F Ov*/ + XMT_BURST = 1<<7, /* Bit 7: Tx Burst Event Cnt Ov */ + XMT_LONG = 1<<6, /* Bit 6: Tx Long Frame Cnt Ov */ + XMT_UC_OK_OV = 1<<5, /* Bit 5: Tx Unicast Cnt Ov */ + XMT_MC_OK_OV = 1<<4, /* Bit 4: Tx Multicast Cnt Ov */ + XMT_BC_OK_OV = 1<<3, /* Bit 3: Tx Broadcast Cnt Ov */ + XMT_OK_LO_OV = 1<<2, /* Bit 2: Octets Tx OK Low CntOv*/ + XMT_OK_HI_OV = 1<<1, /* Bit 1: Octets Tx OK Hi Cnt Ov*/ + XMT_OK_OV = 1<<0, /* Bit 0: Frames Tx Ok Ov */ +}; + +#define XMT_DEF_MSK (XMT_OK_LO_OV | XMT_OK_HI_OV) + +struct skge_rx_desc { + u32 control; + u32 next_offset; + u32 dma_lo; + u32 dma_hi; + u32 status; + u32 timestamp; + u16 csum2; + u16 csum1; + u16 csum2_start; + u16 csum1_start; +}; + +struct skge_tx_desc { + u32 control; + u32 next_offset; + u32 dma_lo; + u32 dma_hi; + u32 status; + u32 csum_offs; + u16 csum_write; + u16 csum_start; + u32 rsvd; +}; + +struct skge_element { + struct skge_element *next; + void *desc; + struct sk_buff *skb; + DECLARE_PCI_UNMAP_ADDR(mapaddr); + DECLARE_PCI_UNMAP_LEN(maplen); +}; + +struct skge_ring { + struct skge_element *to_clean; + struct skge_element *to_use; + struct skge_element *start; + unsigned long count; +}; + + +struct skge_hw { + void __iomem *regs; + struct pci_dev *pdev; + u32 intr_mask; + struct net_device *dev[2]; + + u8 mac_cfg; + u8 chip_id; + u8 phy_type; + u8 pmd_type; + u16 phy_addr; + + u32 ram_size; + u32 ram_offset; + + struct tasklet_struct ext_tasklet; + spinlock_t phy_lock; +}; + +static inline int isdualport(const struct skge_hw *hw) +{ + return !(hw->mac_cfg & CFG_SNG_MAC); +} + +static inline u8 chip_rev(const struct skge_hw *hw) +{ + return (hw->mac_cfg & CFG_CHIP_R_MSK) >> 4; +} + +static inline int iscopper(const struct skge_hw *hw) +{ + return (hw->pmd_type == 'T'); +} + +enum { + FLOW_MODE_NONE = 0, /* No Flow-Control */ + FLOW_MODE_LOC_SEND = 1, /* Local station sends PAUSE */ + FLOW_MODE_REM_SEND = 2, /* Symmetric or just remote */ + FLOW_MODE_SYMMETRIC = 3, /* Both stations may send PAUSE */ +}; + +struct skge_port { + u32 msg_enable; + struct skge_hw *hw; + struct net_device *netdev; + int port; + + spinlock_t tx_lock; + u32 tx_avail; + struct skge_ring tx_ring; + struct skge_ring rx_ring; + + struct net_device_stats net_stats; + + u8 rx_csum; + u8 blink_on; + u8 flow_control; + u8 wol; + u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */ + u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */ + u16 speed; /* SPEED_1000, SPEED_100, ... */ + u32 advertising; + + void *mem; /* PCI memory for rings */ + dma_addr_t dma; + unsigned long mem_size; + + struct timer_list link_check; + struct timer_list led_blink; +}; + + +/* Register accessor for memory mapped device */ +static inline u32 skge_read32(const struct skge_hw *hw, int reg) +{ + return readl(hw->regs + reg); + +} + +static inline u16 skge_read16(const struct skge_hw *hw, int reg) +{ + return readw(hw->regs + reg); +} + +static inline u8 skge_read8(const struct skge_hw *hw, int reg) +{ + return readb(hw->regs + reg); +} + +static inline void skge_write32(const struct skge_hw *hw, int reg, u32 val) +{ + writel(val, hw->regs + reg); +} + +static inline void skge_write16(const struct skge_hw *hw, int reg, u16 val) +{ + writew(val, hw->regs + reg); +} + +static inline void skge_write8(const struct skge_hw *hw, int reg, u8 val) +{ + writeb(val, hw->regs + reg); +} + +/* MAC Related Registers inside the device. */ +#define SKGEMAC_REG(port,reg) (((port)<<7)+(reg)) + +/* PCI config space can be accessed via memory mapped space */ +#define SKGEPCI_REG(reg) ((reg)+ 0x380) + +#define SKGEXM_REG(port, reg) \ + ((BASE_XMAC_1 + (port) * (BASE_XMAC_2 - BASE_XMAC_1)) | (reg) << 1) + +static inline u32 skge_xm_read32(const struct skge_hw *hw, int port, int reg) +{ + return skge_read32(hw, SKGEXM_REG(port,reg)); +} + +static inline u16 skge_xm_read16(const struct skge_hw *hw, int port, int reg) +{ + return skge_read16(hw, SKGEXM_REG(port,reg)); +} + +static inline u8 skge_xm_read8(const struct skge_hw *hw, int port, int reg) +{ + return skge_read8(hw, SKGEXM_REG(port,reg)); +} + +static inline void skge_xm_write32(const struct skge_hw *hw, int port, int r, u32 v) +{ + skge_write32(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_write16(const struct skge_hw *hw, int port, int r, u16 v) +{ + skge_write16(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_write8(const struct skge_hw *hw, int port, int r, u8 v) +{ + skge_write8(hw, SKGEXM_REG(port,r), v); +} + +static inline void skge_xm_outhash(const struct skge_hw *hw, int port, int reg, + const u8 *hash) +{ + skge_xm_write16(hw, port, reg, + (u16)hash[0] | ((u16)hash[1] << 8)); + skge_xm_write16(hw, port, reg+2, + (u16)hash[2] | ((u16)hash[3] << 8)); + skge_xm_write16(hw, port, reg+4, + (u16)hash[4] | ((u16)hash[5] << 8)); + skge_xm_write16(hw, port, reg+6, + (u16)hash[6] | ((u16)hash[7] << 8)); +} + +static inline void skge_xm_outaddr(const struct skge_hw *hw, int port, int reg, + const u8 *addr) +{ + skge_xm_write16(hw, port, reg, + (u16)addr[0] | ((u16)addr[1] << 8)); + skge_xm_write16(hw, port, reg, + (u16)addr[2] | ((u16)addr[3] << 8)); + skge_xm_write16(hw, port, reg, + (u16)addr[4] | ((u16)addr[5] << 8)); +} + + +#define SKGEGMA_REG(port,reg) \ + ((reg) + BASE_GMAC_1 + \ + (port) * (BASE_GMAC_2-BASE_GMAC_1)) + +static inline u16 skge_gma_read16(const struct skge_hw *hw, int port, int reg) +{ + return skge_read16(hw, SKGEGMA_REG(port,reg)); +} + +static inline u32 skge_gma_read32(const struct skge_hw *hw, int port, int reg) +{ + return (u32) skge_read16(hw, SKGEGMA_REG(port,reg)) + | ((u32)skge_read16(hw, SKGEGMA_REG(port,reg+4)) << 16); +} + +static inline u8 skge_gma_read8(const struct skge_hw *hw, int port, int reg) +{ + return skge_read8(hw, SKGEGMA_REG(port,reg)); +} + +static inline void skge_gma_write16(const struct skge_hw *hw, int port, int r, u16 v) +{ + skge_write16(hw, SKGEGMA_REG(port,r), v); +} + +static inline void skge_gma_write32(const struct skge_hw *hw, int port, int r, u32 v) +{ + skge_write16(hw, SKGEGMA_REG(port, r), (u16) v); + skge_write32(hw, SKGEGMA_REG(port, r+4), (u16)(v >> 16)); +} + +static inline void skge_gma_write8(const struct skge_hw *hw, int port, int r, u8 v) +{ + skge_write8(hw, SKGEGMA_REG(port,r), v); +} + +static inline void skge_gm_set_addr(struct skge_hw *hw, int port, int reg, + const u8 *addr) +{ + skge_gma_write16(hw, port, reg, + (u16) addr[0] | ((u16) addr[1] << 8)); + skge_gma_write16(hw, port, reg+4, + (u16) addr[2] | ((u16) addr[3] << 8)); + skge_gma_write16(hw, port, reg+8, + (u16) addr[4] | ((u16) addr[5] << 8)); +} + +#endif diff --git a/drivers/net/slip.c b/drivers/net/slip.c index 8f7841c0374..c79e0ad4ba0 100644 --- a/drivers/net/slip.c +++ b/drivers/net/slip.c @@ -198,18 +198,12 @@ err_exit: static void sl_free_bufs(struct slip *sl) { - void * tmp; - /* Free all SLIP frame buffers. */ - tmp = xchg(&sl->rbuff, NULL); - kfree(tmp); - tmp = xchg(&sl->xbuff, NULL); - kfree(tmp); + kfree(xchg(&sl->rbuff, NULL)); + kfree(xchg(&sl->xbuff, NULL)); #ifdef SL_INCLUDE_CSLIP - tmp = xchg(&sl->cbuff, NULL); - kfree(tmp); - if ((tmp = xchg(&sl->slcomp, NULL)) != NULL) - slhc_free(tmp); + kfree(xchg(&sl->cbuff, NULL)); + slhc_free(xchg(&sl->slcomp, NULL)); #endif } @@ -1430,7 +1424,7 @@ static void __exit slip_exit(void) kfree(slip_devs); slip_devs = NULL; - if ((i = tty_register_ldisc(N_SLIP, NULL))) + if ((i = tty_unregister_ldisc(N_SLIP))) { printk(KERN_ERR "SLIP: can't unregister line discipline (err = %d)\n", i); } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index 5e561ba4433..fd80048f7f7 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -129,7 +129,7 @@ MODULE_PARM_DESC(nowait, "set to 1 for no wait state"); /* * Transmit timeout, default 5 seconds. */ -static int watchdog = 5000; +static int watchdog = 1000; module_param(watchdog, int, 0400); MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds"); @@ -660,15 +660,14 @@ static void smc_hardware_send_pkt(unsigned long data) SMC_outw(((len & 1) ? (0x2000 | buf[len-1]) : 0), ioaddr, DATA_REG); /* - * If THROTTLE_TX_PKTS is set, we look at the TX_EMPTY flag - * before queueing this packet for TX, and if it's clear then - * we stop the queue here. This will have the effect of - * having at most 2 packets queued for TX in the chip's memory - * at all time. If THROTTLE_TX_PKTS is not set then the queue - * is stopped only when memory allocation (MC_ALLOC) does not - * succeed right away. + * If THROTTLE_TX_PKTS is set, we stop the queue here. This will + * have the effect of having at most one packet queued for TX + * in the chip's memory at all time. + * + * If THROTTLE_TX_PKTS is not set then the queue is stopped only + * when memory allocation (MC_ALLOC) does not succeed right away. */ - if (THROTTLE_TX_PKTS && !(SMC_GET_INT() & IM_TX_EMPTY_INT)) + if (THROTTLE_TX_PKTS) netif_stop_queue(dev); /* queue the packet for TX */ @@ -792,17 +791,20 @@ static void smc_tx(struct net_device *dev) DBG(2, "%s: TX STATUS 0x%04x PNR 0x%02x\n", dev->name, tx_status, packet_no); - if (!(tx_status & TS_SUCCESS)) + if (!(tx_status & ES_TX_SUC)) lp->stats.tx_errors++; - if (tx_status & TS_LOSTCAR) + + if (tx_status & ES_LOSTCARR) lp->stats.tx_carrier_errors++; - if (tx_status & TS_LATCOL) { - PRINTK("%s: late collision occurred on last xmit\n", dev->name); + if (tx_status & (ES_LATCOL | ES_16COL)) { + PRINTK("%s: %s occurred on last xmit\n", dev->name, + (tx_status & ES_LATCOL) ? + "late collision" : "too many collisions"); lp->stats.tx_window_errors++; if (!(lp->stats.tx_window_errors & 63) && net_ratelimit()) { - printk(KERN_INFO "%s: unexpectedly large numbers of " - "late collisions. Please check duplex " + printk(KERN_INFO "%s: unexpectedly large number of " + "bad collisions. Please check duplex " "setting.\n", dev->name); } } @@ -1236,7 +1238,7 @@ static void smc_10bt_check_media(struct net_device *dev, int init) old_carrier = netif_carrier_ok(dev) ? 1 : 0; SMC_SELECT_BANK(0); - new_carrier = SMC_inw(ioaddr, EPH_STATUS_REG) & ES_LINK_OK ? 1 : 0; + new_carrier = (SMC_GET_EPH_STATUS() & ES_LINK_OK) ? 1 : 0; SMC_SELECT_BANK(2); if (init || (old_carrier != new_carrier)) { @@ -1308,15 +1310,16 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (!status) break; - if (status & IM_RCV_INT) { - DBG(3, "%s: RX irq\n", dev->name); - smc_rcv(dev); - } else if (status & IM_TX_INT) { + if (status & IM_TX_INT) { + /* do this before RX as it will free memory quickly */ DBG(3, "%s: TX int\n", dev->name); smc_tx(dev); SMC_ACK_INT(IM_TX_INT); if (THROTTLE_TX_PKTS) netif_wake_queue(dev); + } else if (status & IM_RCV_INT) { + DBG(3, "%s: RX irq\n", dev->name); + smc_rcv(dev); } else if (status & IM_ALLOC_INT) { DBG(3, "%s: Allocation irq\n", dev->name); tasklet_hi_schedule(&lp->tx_task); @@ -1337,7 +1340,10 @@ static irqreturn_t smc_interrupt(int irq, void *dev_id, struct pt_regs *regs) /* multiple collisions */ lp->stats.collisions += card_stats & 0xF; } else if (status & IM_RX_OVRN_INT) { - DBG(1, "%s: RX overrun\n", dev->name); + DBG(1, "%s: RX overrun (EPH_ST 0x%04x)\n", dev->name, + ({ int eph_st; SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); + SMC_SELECT_BANK(2); eph_st; }) ); SMC_ACK_INT(IM_RX_OVRN_INT); lp->stats.rx_errors++; lp->stats.rx_fifo_errors++; @@ -1389,7 +1395,7 @@ static void smc_timeout(struct net_device *dev) { struct smc_local *lp = netdev_priv(dev); void __iomem *ioaddr = lp->base; - int status, mask, meminfo, fifo; + int status, mask, eph_st, meminfo, fifo; DBG(2, "%s: %s\n", dev->name, __FUNCTION__); @@ -1398,11 +1404,13 @@ static void smc_timeout(struct net_device *dev) mask = SMC_GET_INT_MASK(); fifo = SMC_GET_FIFO(); SMC_SELECT_BANK(0); + eph_st = SMC_GET_EPH_STATUS(); meminfo = SMC_GET_MIR(); SMC_SELECT_BANK(2); spin_unlock_irq(&lp->lock); - PRINTK( "%s: INT 0x%02x MASK 0x%02x MEM 0x%04x FIFO 0x%04x\n", - dev->name, status, mask, meminfo, fifo ); + PRINTK( "%s: TX timeout (INT 0x%02x INTMASK 0x%02x " + "MEM 0x%04x FIFO 0x%04x EPH_ST 0x%04x)\n", + dev->name, status, mask, meminfo, fifo, eph_st ); smc_reset(dev); smc_enable(dev); @@ -1863,7 +1871,7 @@ static int __init smc_probe(struct net_device *dev, void __iomem *ioaddr) SMC_SELECT_BANK(1); val = SMC_GET_BASE(); val = ((val & 0x1F00) >> 3) << SMC_IO_SHIFT; - if (((unsigned long)ioaddr & ((PAGE_SIZE-1)<<SMC_IO_SHIFT)) != val) { /*XXX: WTF? */ + if (((unsigned int)ioaddr & (0x3e0 << SMC_IO_SHIFT)) != val) { printk("%s: IOADDR %p doesn't match configuration (%x).\n", CARDNAME, ioaddr, val); } diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index ddd2688e7d3..946528e6b74 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -151,7 +151,7 @@ /* We actually can't write halfwords properly if not word aligned */ static inline void -SMC_outw(u16 val, unsigned long ioaddr, int reg) +SMC_outw(u16 val, void __iomem *ioaddr, int reg) { if (reg & 2) { unsigned int v = val << 16; @@ -317,7 +317,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l) #define SMC_insl(a, r, p, l) \ smc_pxa_dma_insl(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insl(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -355,7 +355,7 @@ smc_pxa_dma_insl(u_long ioaddr, u_long physaddr, int reg, int dma, #define SMC_insw(a, r, p, l) \ smc_pxa_dma_insw(a, lp->physaddr, r, dev->dma, p, l) static inline void -smc_pxa_dma_insw(u_long ioaddr, u_long physaddr, int reg, int dma, +smc_pxa_dma_insw(void __iomem *ioaddr, u_long physaddr, int reg, int dma, u_char *buf, int len) { dma_addr_t dmabuf; @@ -681,14 +681,6 @@ static const char * chip_ids[ 16 ] = { /* - . Transmit status bits -*/ -#define TS_SUCCESS 0x0001 -#define TS_LOSTCAR 0x0400 -#define TS_LATCOL 0x0200 -#define TS_16COL 0x0010 - -/* . Receive status bits */ #define RS_ALGNERR 0x8000 @@ -845,6 +837,7 @@ static const char * chip_ids[ 16 ] = { #define SMC_GET_FIFO() SMC_inw( ioaddr, FIFO_REG ) #define SMC_GET_PTR() SMC_inw( ioaddr, PTR_REG ) #define SMC_SET_PTR(x) SMC_outw( x, ioaddr, PTR_REG ) +#define SMC_GET_EPH_STATUS() SMC_inw( ioaddr, EPH_STATUS_REG ) #define SMC_GET_RCR() SMC_inw( ioaddr, RCR_REG ) #define SMC_SET_RCR(x) SMC_outw( x, ioaddr, RCR_REG ) #define SMC_GET_REV() SMC_inw( ioaddr, REV_REG ) diff --git a/drivers/net/starfire.c b/drivers/net/starfire.c index 236bdd3f6ba..12e2b6826fa 100644 --- a/drivers/net/starfire.c +++ b/drivers/net/starfire.c @@ -2,7 +2,7 @@ /* Written 1998-2000 by Donald Becker. - Current maintainer is Ion Badulescu <ionut@cs.columbia.edu>. Please + Current maintainer is Ion Badulescu <ionut ta badula tod org>. Please send all bug reports to me, and not to Donald Becker, as this code has been heavily modified from Donald's original version. @@ -129,12 +129,18 @@ - put the chip to a D3 slumber on driver unload - added config option to enable/disable NAPI -TODO: bugfixes (no bugs known as of right now) + LK1.4.2 (Ion Badulescu) + - finally added firmware (GPL'ed by Adaptec) + - removed compatibility code for 2.2.x + +TODO: - fix forced speed/duplexing code (broken a long time ago, when + somebody converted the driver to use the generic MII code) + - fix VLAN support */ #define DRV_NAME "starfire" -#define DRV_VERSION "1.03+LK1.4.1" -#define DRV_RELDATE "February 10, 2002" +#define DRV_VERSION "1.03+LK1.4.2" +#define DRV_RELDATE "January 19, 2005" #include <linux/config.h> #include <linux/version.h> @@ -145,25 +151,15 @@ TODO: bugfixes (no bugs known as of right now) #include <linux/etherdevice.h> #include <linux/init.h> #include <linux/delay.h> +#include <linux/crc32.h> +#include <linux/ethtool.h> +#include <linux/mii.h> +#include <linux/if_vlan.h> #include <asm/processor.h> /* Processor type for cache alignment. */ #include <asm/uaccess.h> #include <asm/io.h> -/* - * Adaptec's license for their drivers (which is where I got the - * firmware files) does not allow one to redistribute them. Thus, we can't - * include the firmware with this driver. - * - * However, should a legal-to-distribute firmware become available, - * the driver developer would need only to obtain the firmware in the - * form of a C header file. - * Once that's done, the #undef below must be changed into a #define - * for this driver to really use the firmware. Note that Rx/Tx - * hardware TCP checksumming is not possible without the firmware. - * - * WANTED: legal firmware to include with this GPL'd driver. - */ -#undef HAS_FIRMWARE +#include "starfire_firmware.h" /* * The current frame processor firmware fails to checksum a fragment * of length 1. If and when this is fixed, the #define below can be removed. @@ -172,13 +168,7 @@ TODO: bugfixes (no bugs known as of right now) /* * Define this if using the driver with the zero-copy patch */ -#if defined(HAS_FIRMWARE) && defined(MAX_SKB_FRAGS) #define ZEROCOPY -#endif - -#ifdef HAS_FIRMWARE -#include "starfire_firmware.h" -#endif /* HAS_FIRMWARE */ #if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE) #define VLAN_SUPPORT @@ -202,11 +192,7 @@ static int mtu; The Starfire has a 512 element hash table based on the Ethernet CRC. */ static int multicast_filter_limit = 512; /* Whether to do TCP/UDP checksums in hardware */ -#ifdef HAS_FIRMWARE static int enable_hw_cksum = 1; -#else -static int enable_hw_cksum = 0; -#endif #define PKT_BUF_SZ 1536 /* Size of each temporary Rx buffer.*/ /* @@ -291,43 +277,15 @@ static int full_duplex[MAX_UNITS] = {0, }; #define RX_DESC_ADDR_SIZE RxDescAddr32bit #endif -#ifdef MAX_SKB_FRAGS #define skb_first_frag_len(skb) skb_headlen(skb) #define skb_num_frags(skb) (skb_shinfo(skb)->nr_frags + 1) -#else /* not MAX_SKB_FRAGS */ -#define skb_first_frag_len(skb) (skb->len) -#define skb_num_frags(skb) 1 -#endif /* not MAX_SKB_FRAGS */ - -/* 2.2.x compatibility code */ -#if LINUX_VERSION_CODE < 0x20300 - -#include "starfire-kcomp22.h" - -#else /* LINUX_VERSION_CODE > 0x20300 */ - -#include <linux/crc32.h> -#include <linux/ethtool.h> -#include <linux/mii.h> - -#include <linux/if_vlan.h> - -#define init_tx_timer(dev, func, timeout) \ - dev->tx_timeout = func; \ - dev->watchdog_timeo = timeout; -#define kick_tx_timer(dev, func, timeout) - -#define netif_start_if(dev) -#define netif_stop_if(dev) - -#define PCI_SLOT_NAME(pci_dev) pci_name(pci_dev) - -#endif /* LINUX_VERSION_CODE > 0x20300 */ #ifdef HAVE_NETDEV_POLL #define init_poll(dev) \ +do { \ dev->poll = &netdev_poll; \ - dev->weight = max_interrupt_work; + dev->weight = max_interrupt_work; \ +} while (0) #define netdev_rx(dev, ioaddr) \ do { \ u32 intr_enable; \ @@ -341,7 +299,7 @@ do { \ /* Paranoia check */ \ intr_enable = readl(ioaddr + IntrEnable); \ if (intr_enable & (IntrRxDone | IntrRxEmpty)) { \ - printk("%s: interrupt while in polling mode!\n", dev->name); \ + printk(KERN_INFO "%s: interrupt while in polling mode!\n", dev->name); \ intr_enable &= ~(IntrRxDone | IntrRxEmpty); \ writel(intr_enable, ioaddr + IntrEnable); \ } \ @@ -371,6 +329,7 @@ KERN_INFO " (unofficial 2.2/2.4 kernel port, version " DRV_VERSION ", " DRV_RELD MODULE_AUTHOR("Donald Becker <becker@scyld.com>"); MODULE_DESCRIPTION("Adaptec Starfire Ethernet driver"); MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); module_param(max_interrupt_work, int, 0); module_param(mtu, int, 0); @@ -425,7 +384,7 @@ on the 32/64 bitness of the architecture), and relies on automatic minimum-length padding. It does not use the completion queue consumer index, but instead checks for non-zero status entries. -For receive this driver uses type 0/1/2/3 receive descriptors. The driver +For receive this driver uses type 2/3 receive descriptors. The driver allocates full frame size skbuffs for the Rx ring buffers, so all frames should fit in a single descriptor. The driver does not use the completion queue consumer index, but instead checks for non-zero status entries. @@ -476,7 +435,7 @@ IVc. Errata */ - + enum chip_capability_flags {CanHaveMII=1, }; @@ -670,7 +629,6 @@ struct full_rx_done_desc { u32 timestamp; }; /* XXX: this is ugly and I'm not sure it's worth the trouble -Ion */ -#ifdef HAS_FIRMWARE #ifdef VLAN_SUPPORT typedef struct full_rx_done_desc rx_done_desc; #define RxComplType RxComplType3 @@ -678,15 +636,6 @@ typedef struct full_rx_done_desc rx_done_desc; typedef struct csum_rx_done_desc rx_done_desc; #define RxComplType RxComplType2 #endif /* not VLAN_SUPPORT */ -#else /* not HAS_FIRMWARE */ -#ifdef VLAN_SUPPORT -typedef struct basic_rx_done_desc rx_done_desc; -#define RxComplType RxComplType1 -#else /* not VLAN_SUPPORT */ -typedef struct short_rx_done_desc rx_done_desc; -#define RxComplType RxComplType0 -#endif /* not VLAN_SUPPORT */ -#endif /* not HAS_FIRMWARE */ enum rx_done_bits { RxOK=0x20000000, RxFIFOErr=0x10000000, RxBufQ2=0x08000000, @@ -898,13 +847,10 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, /* enable MWI -- it vastly improves Rx performance on sparc64 */ pci_set_mwi(pdev); -#ifdef MAX_SKB_FRAGS - dev->features |= NETIF_F_SG; -#endif /* MAX_SKB_FRAGS */ #ifdef ZEROCOPY /* Starfire can do TCP/UDP checksumming */ if (enable_hw_cksum) - dev->features |= NETIF_F_IP_CSUM; + dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG; #endif /* ZEROCOPY */ #ifdef VLAN_SUPPORT dev->features |= NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; @@ -1008,7 +954,8 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, /* The chip-specific entries in the device structure. */ dev->open = &netdev_open; dev->hard_start_xmit = &start_tx; - init_tx_timer(dev, tx_timeout, TX_TIMEOUT); + dev->tx_timeout = tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; init_poll(dev); dev->stop = &netdev_close; dev->get_stats = &get_stats; @@ -1039,7 +986,7 @@ static int __devinit starfire_init_one(struct pci_dev *pdev, if ((mdio_read(dev, phy, MII_BMCR) & BMCR_RESET) == 0) break; if (boguscnt == 0) { - printk("%s: PHY reset never completed!\n", dev->name); + printk("%s: PHY#%d reset never completed!\n", dev->name, phy); continue; } mii_status = mdio_read(dev, phy, MII_BMSR); @@ -1110,6 +1057,7 @@ static int netdev_open(struct net_device *dev) size_t tx_done_q_size, rx_done_q_size, tx_ring_size, rx_ring_size; /* Do we ever need to reset the chip??? */ + retval = request_irq(dev->irq, &intr_handler, SA_SHIRQ, dev->name, dev); if (retval) return retval; @@ -1211,7 +1159,6 @@ static int netdev_open(struct net_device *dev) writel(np->intr_timer_ctrl, ioaddr + IntrTimerCtrl); - netif_start_if(dev); netif_start_queue(dev); if (debug > 1) @@ -1238,13 +1185,11 @@ static int netdev_open(struct net_device *dev) writel(ETH_P_8021Q, ioaddr + VlanType); #endif /* VLAN_SUPPORT */ -#ifdef HAS_FIRMWARE /* Load Rx/Tx firmware into the frame processors */ for (i = 0; i < FIRMWARE_RX_SIZE * 2; i++) writel(firmware_rx[i], ioaddr + RxGfpMem + i * 4); for (i = 0; i < FIRMWARE_TX_SIZE * 2; i++) writel(firmware_tx[i], ioaddr + TxGfpMem + i * 4); -#endif /* HAS_FIRMWARE */ if (enable_hw_cksum) /* Enable the Rx and Tx units, and the Rx/Tx frame processors. */ writel(TxEnable|TxGFPEnable|RxEnable|RxGFPEnable, ioaddr + GenCtrl); @@ -1378,8 +1323,6 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) u32 status; int i; - kick_tx_timer(dev, tx_timeout, TX_TIMEOUT); - /* * be cautious here, wrapping the queue has weird semantics * and we may not have enough slots even when it seems we do. @@ -1404,7 +1347,7 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) } if (has_bad_length) - skb_checksum_help(skb); + skb_checksum_help(skb, 0); } #endif /* ZEROCOPY && HAS_BROKEN_FIRMWARE */ @@ -1433,12 +1376,10 @@ static int start_tx(struct sk_buff *skb, struct net_device *dev) np->tx_info[entry].mapping = pci_map_single(np->pci_dev, skb->data, skb_first_frag_len(skb), PCI_DMA_TODEVICE); } else { -#ifdef MAX_SKB_FRAGS skb_frag_t *this_frag = &skb_shinfo(skb)->frags[i - 1]; status |= this_frag->size; np->tx_info[entry].mapping = pci_map_single(np->pci_dev, page_address(this_frag->page) + this_frag->page_offset, this_frag->size, PCI_DMA_TODEVICE); -#endif /* MAX_SKB_FRAGS */ } np->tx_ring[entry].addr = cpu_to_dma(np->tx_info[entry].mapping); @@ -1531,7 +1472,6 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs np->tx_info[entry].mapping = 0; np->dirty_tx += np->tx_info[entry].used_slots; entry = (entry + np->tx_info[entry].used_slots) % TX_RING_SIZE; -#ifdef MAX_SKB_FRAGS { int i; for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { @@ -1543,7 +1483,7 @@ static irqreturn_t intr_handler(int irq, void *dev_instance, struct pt_regs *rgs entry++; } } -#endif /* MAX_SKB_FRAGS */ + dev_kfree_skb_irq(skb); } np->tx_done_q[np->tx_done].status = 0; @@ -1603,7 +1543,7 @@ static int __netdev_rx(struct net_device *dev, int *quota) if (debug > 4) printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status); if (!(desc_status & RxOK)) { - /* There was a error. */ + /* There was an error. */ if (debug > 2) printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status); np->stats.rx_errors++; @@ -1656,11 +1596,10 @@ static int __netdev_rx(struct net_device *dev, int *quota) #endif skb->protocol = eth_type_trans(skb, dev); -#if defined(HAS_FIRMWARE) || defined(VLAN_SUPPORT) +#ifdef VLAN_SUPPORT if (debug > 4) printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2)); #endif -#ifdef HAS_FIRMWARE if (le16_to_cpu(desc->status2) & 0x0100) { skb->ip_summed = CHECKSUM_UNNECESSARY; np->stats.rx_compressed++; @@ -1679,7 +1618,6 @@ static int __netdev_rx(struct net_device *dev, int *quota) skb->csum = le16_to_cpu(desc->csum); printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2)); } -#endif /* HAS_FIRMWARE */ #ifdef VLAN_SUPPORT if (np->vlgrp && le16_to_cpu(desc->status2) & 0x0200) { if (debug > 4) @@ -1900,9 +1838,6 @@ static struct net_device_stats *get_stats(struct net_device *dev) } -/* Chips may use the upper or lower CRC bits, and may reverse and/or invert - them. Select the endian-ness that results in minimal calculations. -*/ static void set_rx_mode(struct net_device *dev) { struct netdev_private *np = netdev_priv(dev); @@ -1969,6 +1904,8 @@ static void set_rx_mode(struct net_device *dev) memset(mc_filter, 0, sizeof(mc_filter)); for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; i++, mclist = mclist->next) { + /* The chip uses the upper 9 CRC bits + as index into the hash table */ int bit_nr = ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 23; __u32 *fptr = (__u32 *) &mc_filter[(bit_nr >> 4) & ~1]; @@ -2001,7 +1938,7 @@ static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) struct netdev_private *np = netdev_priv(dev); strcpy(info->driver, DRV_NAME); strcpy(info->version, DRV_VERSION); - strcpy(info->bus_info, PCI_SLOT_NAME(np->pci_dev)); + strcpy(info->bus_info, pci_name(np->pci_dev)); } static int get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) @@ -2083,7 +2020,6 @@ static int netdev_close(struct net_device *dev) int i; netif_stop_queue(dev); - netif_stop_if(dev); if (debug > 1) { printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n", @@ -2184,7 +2120,13 @@ static int __init starfire_init (void) /* when a module, this is printed whether or not devices are found in probe */ #ifdef MODULE printk(version); +#ifdef HAVE_NETDEV_POLL + printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n"); +#else + printk(KERN_INFO DRV_NAME ": polling (NAPI) disabled\n"); #endif +#endif + #ifndef ADDR_64BITS /* we can do this test only at run-time... sigh */ if (sizeof(dma_addr_t) == sizeof(u64)) { @@ -2192,10 +2134,6 @@ static int __init starfire_init (void) return -ENODEV; } #endif /* not ADDR_64BITS */ -#ifndef HAS_FIRMWARE - /* unconditionally disable hw cksums if firmware is not present */ - enable_hw_cksum = 0; -#endif /* not HAS_FIRMWARE */ return pci_module_init (&starfire_driver); } diff --git a/drivers/net/starfire_firmware.h b/drivers/net/starfire_firmware.h new file mode 100644 index 00000000000..0a668528955 --- /dev/null +++ b/drivers/net/starfire_firmware.h @@ -0,0 +1,346 @@ +/* + * Copyright 2003 Adaptec, Inc. + * + * Please read the following license before using the Adaptec Software + * ("Program"). If you do not agree to the license terms, do not use the + * Program: + * + * You agree to be bound by version 2 of the General Public License ("GPL") + * dated June 1991, which can be found at http://www.fsf.org/licenses/gpl.html. + * If the link is broken, write to Free Software Foundation, 59 Temple Place, + * Boston, Massachusetts 02111-1307. + * + * BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE IT IS LICENSED "AS IS" AND + * THERE IS NO WARRANTY FOR THE PROGRAM, INCLUDING BUT NOT LIMITED TO THE + * IMPLIED WARRANTIES OF MERCHANTIBILITY OR FITNESS FOR A PARTICULAR PURPOSE + * (TO THE EXTENT PERMITTED BY APPLICABLE LAW). USE OF THE PROGRAM IS AT YOUR + * OWN RISK. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE TO YOU FOR + * DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES + * ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM. + * + */ + +static const u32 firmware_rx[] = { + 0x010003dc, 0x00000000, + 0x04000421, 0x00000086, + 0x80000015, 0x0000180e, + 0x81000015, 0x00006664, + 0x1a0040ab, 0x00000b06, + 0x14200011, 0x00000000, + 0x14204022, 0x0000aaaa, + 0x14204022, 0x00000300, + 0x14204022, 0x00000000, + 0x1a0040ab, 0x00000b14, + 0x14200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x009e8050, 0x00000000, + 0x03008015, 0x00000000, + 0x86008015, 0x00000000, + 0x82000015, 0x00008000, + 0x0100001c, 0x00000000, + 0x000050a0, 0x0000010c, + 0x4e20d011, 0x00006008, + 0x1420d012, 0x00004008, + 0x0000f090, 0x00007000, + 0x0000c8b0, 0x00003000, + 0x00004040, 0x00000000, + 0x00108015, 0x00000000, + 0x00a2c150, 0x00004000, + 0x00a400b0, 0x00000014, + 0x00000020, 0x00000000, + 0x2500400d, 0x00002525, + 0x00047220, 0x00003100, + 0x00934070, 0x00000000, + 0x00000020, 0x00000000, + 0x00924460, 0x00000184, + 0x2b20c011, 0x00000000, + 0x0000c420, 0x00000540, + 0x36014018, 0x0000422d, + 0x14200011, 0x00000000, + 0x00924460, 0x00000183, + 0x3200001f, 0x00000034, + 0x02ac0015, 0x00000002, + 0x00a60110, 0x00000008, + 0x42200011, 0x00000000, + 0x00924060, 0x00000103, + 0x0000001e, 0x00000000, + 0x00000020, 0x00000100, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x45014018, 0x00004545, + 0x00808050, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x15200011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000060, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x000643a9, 0x00000000, + 0x0000c420, 0x00000140, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x000642a9, 0x00000000, + 0x00024420, 0x00000183, + 0x5601401a, 0x00005956, + 0x82000015, 0x00002000, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, +}; /* 104 Rx instructions */ +#define FIRMWARE_RX_SIZE 104 + +static const u32 firmware_tx[] = { + 0x010003dc, 0x00000000, + 0x04000421, 0x00000086, + 0x80000015, 0x0000180e, + 0x81000015, 0x00006664, + 0x1a0040ab, 0x00000b06, + 0x14200011, 0x00000000, + 0x14204022, 0x0000aaaa, + 0x14204022, 0x00000300, + 0x14204022, 0x00000000, + 0x1a0040ab, 0x00000b14, + 0x14200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x009e8050, 0x00000000, + 0x03008015, 0x00000000, + 0x86008015, 0x00000000, + 0x82000015, 0x00008000, + 0x0100001c, 0x00000000, + 0x000050a0, 0x0000010c, + 0x4e20d011, 0x00006008, + 0x1420d012, 0x00004008, + 0x0000f090, 0x00007000, + 0x0000c8b0, 0x00003000, + 0x00004040, 0x00000000, + 0x00108015, 0x00000000, + 0x00a2c150, 0x00004000, + 0x00a400b0, 0x00000014, + 0x00000020, 0x00000000, + 0x2500400d, 0x00002525, + 0x00047220, 0x00003100, + 0x00934070, 0x00000000, + 0x00000020, 0x00000000, + 0x00924460, 0x00000184, + 0x2b20c011, 0x00000000, + 0x0000c420, 0x00000540, + 0x36014018, 0x0000422d, + 0x14200011, 0x00000000, + 0x00924460, 0x00000183, + 0x3200001f, 0x00000034, + 0x02ac0015, 0x00000002, + 0x00a60110, 0x00000008, + 0x42200011, 0x00000000, + 0x00924060, 0x00000103, + 0x0000001e, 0x00000000, + 0x00000020, 0x00000100, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x45014018, 0x00004545, + 0x00808050, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x15200011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000060, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x000643a9, 0x00000000, + 0x0000c420, 0x00000140, + 0x5601401a, 0x00005956, + 0x14000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x000642a9, 0x00000000, + 0x00024420, 0x00000183, + 0x5601401a, 0x00005956, + 0x82000015, 0x00002000, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, + 0x82000015, 0x00000010, + 0x15200011, 0x00000000, +}; /* 104 Tx instructions */ +#define FIRMWARE_TX_SIZE 104 +#if 0 +static const u32 firmware_wol[] = { + 0x010003dc, 0x00000000, + 0x19000421, 0x00000087, + 0x80000015, 0x00001a1a, + 0x81000015, 0x00001a1a, + 0x1a0040ab, 0x00000b06, + 0x15200011, 0x00000000, + 0x15204022, 0x0000aaaa, + 0x15204022, 0x00000300, + 0x15204022, 0x00000000, + 0x1a0040ab, 0x00000b15, + 0x15200011, 0x00000000, + 0x83000015, 0x00000002, + 0x04000021, 0x00000000, + 0x00000010, 0x00000000, + 0x04000421, 0x00000087, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00008015, 0x00000000, + 0x0000003e, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x82000015, 0x00004000, + 0x82000015, 0x00008000, + 0x0000000c, 0x00000000, + 0x00000010, 0x00000000, + 0x00004080, 0x00000100, + 0x1f20c011, 0x00001122, + 0x2720f011, 0x00003011, + 0x19200071, 0x00000000, + 0x1a200051, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x1d2040a4, 0x00003344, + 0x1d2040a2, 0x00005566, + 0x000040a0, 0x00000100, + 0x00108050, 0x00000001, + 0x1a208012, 0x00000006, + 0x82000015, 0x00008080, + 0x010003dc, 0x00000000, + 0x1d2040a4, 0x00002233, + 0x1d2040a4, 0x00004455, + 0x2d208011, 0x00000005, + 0x1d2040a4, 0x00006611, + 0x00108050, 0x00000001, + 0x27200011, 0x00000000, + 0x1d2050a4, 0x00006600, + 0x82000015, 0x00008080, + 0x010003dc, 0x00000000, + 0x00000050, 0x00000000, + 0x1b200031, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x0000001e, 0x00000000, + 0x00924460, 0x00000086, + 0x00004080, 0x00000000, + 0x0092c070, 0x00000000, + 0x00924060, 0x00000100, + 0x0000c890, 0x00005000, + 0x00a6c110, 0x00000000, + 0x00b0c090, 0x00000012, + 0x021c0015, 0x00000000, + 0x3200001f, 0x00000034, + 0x00924460, 0x00000510, + 0x44210011, 0x00000000, + 0x42000011, 0x00000000, + 0x83000015, 0x00000040, + 0x00924460, 0x00000508, + 0x476a0012, 0x00000100, + 0x83000015, 0x00000008, + 0x16200011, 0x00000000, + 0x001e8050, 0x00000000, + 0x001e8050, 0x00000000, + 0x00808050, 0x00000000, + 0x03008015, 0x00000000, + 0x62208012, 0x00000000, + 0x82000015, 0x00000800, + 0x16200011, 0x00000000, + 0x80000015, 0x0000eea4, + 0x81000015, 0x0000005f, + 0x00000020, 0x00000000, + 0x00004120, 0x00000000, + 0x00004a00, 0x00004000, + 0x00924460, 0x00000190, + 0x5c01401a, 0x0000595c, + 0x15000011, 0x00000000, + 0x00934050, 0x00000018, + 0x00930050, 0x00000018, + 0x3601403a, 0x0000002d, + 0x00064029, 0x00000000, + 0x0000c420, 0x00000140, + 0x5c01401a, 0x0000595c, + 0x15000011, 0x00000000, + 0x00000010, 0x00000000, + 0x00000010, 0x00000000, + 0x00064029, 0x00000000, + 0x00024420, 0x00000183, + 0x5c01401a, 0x0000595c, + 0x82000015, 0x00002000, + 0x16200011, 0x00000000, + 0x82000015, 0x00000010, + 0x16200011, 0x00000000, + 0x82000015, 0x00000010, + 0x16200011, 0x00000000, +}; /* 104 WoL instructions */ +#define FIRMWARE_WOL_SIZE 104 +#endif diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f79b02e80e7..7e371b1209a 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7,7 +7,12 @@ * Copyright (C) 2005 Broadcom Corporation. * * Firmware is: - * Copyright (C) 2000-2003 Broadcom Corporation. + * Derived from proprietary unpublished source code, + * Copyright (C) 2000-2003 Broadcom Corporation. + * + * Permission is hereby granted for the distribution of this firmware + * data in hexadecimal or equivalent format, provided this copyright + * notice is accompanying it. */ #include <linux/config.h> @@ -61,8 +66,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.27" -#define DRV_MODULE_RELDATE "May 5, 2005" +#define DRV_MODULE_VERSION "3.32" +#define DRV_MODULE_RELDATE "June 24, 2005" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 @@ -133,6 +138,8 @@ /* number of ETHTOOL_GSTATS u64's */ #define TG3_NUM_STATS (sizeof(struct tg3_ethtool_stats)/sizeof(u64)) +#define TG3_NUM_TEST 6 + static char version[] __devinitdata = DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; @@ -206,6 +213,8 @@ static struct pci_device_id tg3_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, + { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5752M, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL }, { PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_TIGON3_5753M, @@ -314,15 +323,24 @@ static struct { { "nic_tx_threshold_hit" } }; +static struct { + const char string[ETH_GSTRING_LEN]; +} ethtool_test_keys[TG3_NUM_TEST] = { + { "nvram test (online) " }, + { "link test (online) " }, + { "register test (offline)" }, + { "memory test (offline)" }, + { "loopback test (offline)" }, + { "interrupt test (offline)" }, +}; + static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } else { writel(val, tp->regs + off); if ((tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) != 0) @@ -333,12 +351,10 @@ static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val) static void _tw32_flush(struct tg3 *tp, u32 off, u32 val) { if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } else { void __iomem *dest = tp->regs + off; writel(val, dest); @@ -378,28 +394,24 @@ static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val) static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); /* Always leave this as zero. */ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val) { - unsigned long flags; - - spin_lock_irqsave(&tp->indirect_lock, flags); + spin_lock_bh(&tp->indirect_lock); pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off); pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val); /* Always leave this as zero. */ pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0); - spin_unlock_irqrestore(&tp->indirect_lock, flags); + spin_unlock_bh(&tp->indirect_lock); } static void tg3_disable_ints(struct tg3 *tp) @@ -418,11 +430,14 @@ static inline void tg3_cond_int(struct tg3 *tp) static void tg3_enable_ints(struct tg3 *tp) { + tp->irq_sync = 0; + wmb(); + tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + (tp->last_tag << 24)); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); - tg3_cond_int(tp); } @@ -455,16 +470,23 @@ static void tg3_restart_ints(struct tg3 *tp) { tw32(TG3PCI_MISC_HOST_CTRL, (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT)); - tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000000); + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + tp->last_tag << 24); mmiowb(); - if (tg3_has_work(tp)) + /* When doing tagged status, this work check is unnecessary. + * The last_tag we write above tells the chip which piece of + * work we've completed. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) && + tg3_has_work(tp)) tw32(HOSTCC_MODE, tp->coalesce_mode | (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); } static inline void tg3_netif_stop(struct tg3 *tp) { + tp->dev->trans_start = jiffies; /* prevent tx timeout */ netif_poll_disable(tp->dev); netif_tx_disable(tp->dev); } @@ -477,7 +499,8 @@ static inline void tg3_netif_start(struct tg3 *tp) * (such as after tg3_init_hw) */ netif_poll_enable(tp->dev); - tg3_cond_int(tp); + tp->hw_status->status |= SD_STATUS_UPDATED; + tg3_enable_ints(tp); } static void tg3_switch_clocks(struct tg3 *tp) @@ -2500,7 +2523,7 @@ static int tg3_setup_phy(struct tg3 *tp, int force_reset) if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { if (netif_carrier_ok(tp->dev)) { tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); + tp->coal.stats_block_coalesce_usecs); } else { tw32(HOSTCC_STAT_COAL_TICKS, 0); } @@ -2551,7 +2574,7 @@ static void tg3_tx(struct tg3 *tp) sw_idx = NEXT_TX(sw_idx); } - dev_kfree_skb_irq(skb); + dev_kfree_skb(skb); } tp->tx_cons = sw_idx; @@ -2857,11 +2880,8 @@ static int tg3_poll(struct net_device *netdev, int *budget) { struct tg3 *tp = netdev_priv(netdev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; int done; - spin_lock_irqsave(&tp->lock, flags); - /* handle link change and other phy events */ if (!(tp->tg3_flags & (TG3_FLAG_USE_LINKCHG_REG | @@ -2869,7 +2889,9 @@ static int tg3_poll(struct net_device *netdev, int *budget) if (sblk->status & SD_STATUS_LINK_CHG) { sblk->status = SD_STATUS_UPDATED | (sblk->status & ~SD_STATUS_LINK_CHG); + spin_lock(&tp->lock); tg3_setup_phy(tp, 0); + spin_unlock(&tp->lock); } } @@ -2880,13 +2902,10 @@ static int tg3_poll(struct net_device *netdev, int *budget) spin_unlock(&tp->tx_lock); } - spin_unlock_irqrestore(&tp->lock, flags); - /* run RX thread, within the bounds set by NAPI. * All RX "locking" is done by ensuring outside * code synchronizes with dev->poll() */ - done = 1; if (sblk->idx[0].rx_producer != tp->rx_rcb_ptr) { int orig_budget = *budget; int work_done; @@ -2898,22 +2917,59 @@ static int tg3_poll(struct net_device *netdev, int *budget) *budget -= work_done; netdev->quota -= work_done; - - if (work_done >= orig_budget) - done = 0; } + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->last_tag = sblk->status_tag; + rmb(); + sblk->status &= ~SD_STATUS_UPDATED; + /* if no more work, tell net stack and NIC we're done */ + done = !tg3_has_work(tp); if (done) { - spin_lock_irqsave(&tp->lock, flags); - __netif_rx_complete(netdev); + spin_lock(&tp->lock); + netif_rx_complete(netdev); tg3_restart_ints(tp); - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock(&tp->lock); } return (done ? 0 : 1); } +static void tg3_irq_quiesce(struct tg3 *tp) +{ + BUG_ON(tp->irq_sync); + + tp->irq_sync = 1; + smp_mb(); + + synchronize_irq(tp->pdev->irq); +} + +static inline int tg3_irq_sync(struct tg3 *tp) +{ + return tp->irq_sync; +} + +/* Fully shutdown all tg3 driver activity elsewhere in the system. + * If irq_sync is non-zero, then the IRQ handler must be synchronized + * with as well. Most of the time, this is not necessary except when + * shutting down the device. + */ +static inline void tg3_full_lock(struct tg3 *tp, int irq_sync) +{ + if (irq_sync) + tg3_irq_quiesce(tp); + spin_lock_bh(&tp->lock); + spin_lock(&tp->tx_lock); +} + +static inline void tg3_full_unlock(struct tg3 *tp) +{ + spin_unlock(&tp->tx_lock); + spin_unlock_bh(&tp->lock); +} + /* MSI ISR - No need to check for interrupt sharing and no need to * flush status block and interrupt mailbox. PCI ordering rules * guarantee that MSI will arrive after the status block. @@ -2923,31 +2979,28 @@ static irqreturn_t tg3_msi(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; - - spin_lock_irqsave(&tp->lock, flags); /* - * writing any value to intr-mbox-0 clears PCI INTA# and + * Writing any value to intr-mbox-0 clears PCI INTA# and * chip-internal interrupt pending events. - * writing non-zero to intr-mbox-0 additional tells the + * Writing non-zero to intr-mbox-0 additional tells the * NIC to stop sending us irqs, engaging "in-intr-handler" * event coalescing. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); + tp->last_tag = sblk->status_tag; + rmb(); + if (tg3_irq_sync(tp)) + goto out; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { - /* no work, re-enable interrupts - */ + /* No work, re-enable interrupts. */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); } - - spin_unlock_irqrestore(&tp->lock, flags); - +out: return IRQ_RETVAL(1); } @@ -2956,10 +3009,50 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) struct net_device *dev = dev_id; struct tg3 *tp = netdev_priv(dev); struct tg3_hw_status *sblk = tp->hw_status; - unsigned long flags; unsigned int handled = 1; - spin_lock_irqsave(&tp->lock, flags); + /* In INTx mode, it is possible for the interrupt to arrive at + * the CPU before the status block posted prior to the interrupt. + * Reading the PCI State register will confirm whether the + * interrupt is ours and will flush the status block. + */ + if ((sblk->status & SD_STATUS_UPDATED) || + !(tr32(TG3PCI_PCISTATE) & PCISTATE_INT_NOT_ACTIVE)) { + /* + * Writing any value to intr-mbox-0 clears PCI INTA# and + * chip-internal interrupt pending events. + * Writing non-zero to intr-mbox-0 additional tells the + * NIC to stop sending us irqs, engaging "in-intr-handler" + * event coalescing. + */ + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000001); + if (tg3_irq_sync(tp)) + goto out; + sblk->status &= ~SD_STATUS_UPDATED; + if (likely(tg3_has_work(tp))) + netif_rx_schedule(dev); /* schedule NAPI poll */ + else { + /* No work, shared interrupt perhaps? re-enable + * interrupts, and flush that PCI write + */ + tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, + 0x00000000); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + } + } else { /* shared interrupt */ + handled = 0; + } +out: + return IRQ_RETVAL(handled); +} + +static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *regs) +{ + struct net_device *dev = dev_id; + struct tg3 *tp = netdev_priv(dev); + struct tg3_hw_status *sblk = tp->hw_status; + unsigned int handled = 1; /* In INTx mode, it is possible for the interrupt to arrive at * the CPU before the status block posted prior to the interrupt. @@ -2977,13 +3070,11 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001); - /* - * Flush PCI write. This also guarantees that our - * status block has been flushed to host memory. - */ - tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tp->last_tag = sblk->status_tag; + rmb(); + if (tg3_irq_sync(tp)) + goto out; sblk->status &= ~SD_STATUS_UPDATED; - if (likely(tg3_has_work(tp))) netif_rx_schedule(dev); /* schedule NAPI poll */ else { @@ -2991,15 +3082,13 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs) * interrupts, and flush that PCI write */ tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, - 0x00000000); + tp->last_tag << 24); tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); } } else { /* shared interrupt */ handled = 0; } - - spin_unlock_irqrestore(&tp->lock, flags); - +out: return IRQ_RETVAL(handled); } @@ -3020,7 +3109,7 @@ static irqreturn_t tg3_test_isr(int irq, void *dev_id, } static int tg3_init_hw(struct tg3 *); -static int tg3_halt(struct tg3 *, int); +static int tg3_halt(struct tg3 *, int, int); #ifdef CONFIG_NET_POLL_CONTROLLER static void tg3_poll_controller(struct net_device *dev) @@ -3038,19 +3127,17 @@ static void tg3_reset_task(void *_data) tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); restart_timer = tp->tg3_flags2 & TG3_FLG2_RESTART_TIMER; tp->tg3_flags2 &= ~TG3_FLG2_RESTART_TIMER; - tg3_halt(tp, 0); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 0); tg3_init_hw(tp); tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (restart_timer) mod_timer(&tp->timer, jiffies + 1); @@ -3156,39 +3243,21 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned int i; u32 len, entry, base_flags, mss; int would_hit_hwbug; - unsigned long flags; len = skb_headlen(skb); /* No BH disabling for tx_lock here. We are running in BH disabled * context and TX reclaim runs via tp->poll inside of a software - * interrupt. Rejoice! - * - * Actually, things are not so simple. If we are to take a hw - * IRQ here, we can deadlock, consider: - * - * CPU1 CPU2 - * tg3_start_xmit - * take tp->tx_lock - * tg3_timer - * take tp->lock - * tg3_interrupt - * spin on tp->lock - * spin on tp->tx_lock - * - * So we really do need to disable interrupts when taking - * tx_lock here. + * interrupt. Furthermore, IRQ processing runs lockless so we have + * no IRQ context deadlocks to worry about either. Rejoice! */ - local_irq_save(flags); - if (!spin_trylock(&tp->tx_lock)) { - local_irq_restore(flags); + if (!spin_trylock(&tp->tx_lock)) return NETDEV_TX_LOCKED; - } /* This is a hard error, log it. */ if (unlikely(TX_BUFFS_AVAIL(tp) <= (skb_shinfo(skb)->nr_frags + 1))) { netif_stop_queue(dev); - spin_unlock_irqrestore(&tp->tx_lock, flags); + spin_unlock(&tp->tx_lock); printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n", dev->name); return NETDEV_TX_BUSY; @@ -3353,7 +3422,7 @@ static int tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) out_unlock: mmiowb(); - spin_unlock_irqrestore(&tp->tx_lock, flags); + spin_unlock(&tp->tx_lock); dev->trans_start = jiffies; @@ -3387,10 +3456,10 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) } tg3_netif_stop(tp); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); + tg3_full_lock(tp, 1); + + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_set_mtu(dev, tp, new_mtu); @@ -3398,8 +3467,7 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -4081,19 +4149,19 @@ static void tg3_stop_fw(struct tg3 *tp) } /* tp->lock is held. */ -static int tg3_halt(struct tg3 *tp, int silent) +static int tg3_halt(struct tg3 *tp, int kind, int silent) { int err; tg3_stop_fw(tp); - tg3_write_sig_pre_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_pre_reset(tp, kind); tg3_abort_hw(tp, silent); err = tg3_chip_reset(tp); - tg3_write_sig_legacy(tp, RESET_KIND_SHUTDOWN); - tg3_write_sig_post_reset(tp, RESET_KIND_SHUTDOWN); + tg3_write_sig_legacy(tp, kind); + tg3_write_sig_post_reset(tp, kind); if (err) return err; @@ -4307,7 +4375,12 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b */ tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG; + /* It is possible that bootcode is still loading at this point. + * Get the nvram lock first before halting the cpu. + */ + tg3_nvram_lock(tp); err = tg3_halt_cpu(tp, cpu_base); + tg3_nvram_unlock(tp); if (err) goto out; @@ -5015,9 +5088,9 @@ static int tg3_set_mac_addr(struct net_device *dev, void *p) memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); __tg3_set_mac_addr(tp); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -5044,6 +5117,27 @@ static void tg3_set_bdinfo(struct tg3 *tp, u32 bdinfo_addr, } static void __tg3_set_rx_mode(struct net_device *); +static void tg3_set_coalesce(struct tg3 *tp, struct ethtool_coalesce *ec) +{ + tw32(HOSTCC_RXCOL_TICKS, ec->rx_coalesce_usecs); + tw32(HOSTCC_TXCOL_TICKS, ec->tx_coalesce_usecs); + tw32(HOSTCC_RXMAX_FRAMES, ec->rx_max_coalesced_frames); + tw32(HOSTCC_TXMAX_FRAMES, ec->tx_max_coalesced_frames); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + tw32(HOSTCC_RXCOAL_TICK_INT, ec->rx_coalesce_usecs_irq); + tw32(HOSTCC_TXCOAL_TICK_INT, ec->tx_coalesce_usecs_irq); + } + tw32(HOSTCC_RXCOAL_MAXF_INT, ec->rx_max_coalesced_frames_irq); + tw32(HOSTCC_TXCOAL_MAXF_INT, ec->tx_max_coalesced_frames_irq); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { + u32 val = ec->stats_block_coalesce_usecs; + + if (!netif_carrier_ok(tp->dev)) + val = 0; + + tw32(HOSTCC_STAT_COAL_TICKS, val); + } +} /* tp->lock is held. */ static int tg3_reset_hw(struct tg3 *tp) @@ -5366,16 +5460,7 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(10); } - tw32(HOSTCC_RXCOL_TICKS, 0); - tw32(HOSTCC_TXCOL_TICKS, LOW_TXCOL_TICKS); - tw32(HOSTCC_RXMAX_FRAMES, 1); - tw32(HOSTCC_TXMAX_FRAMES, LOW_RXMAX_FRAMES); - if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { - tw32(HOSTCC_RXCOAL_TICK_INT, 0); - tw32(HOSTCC_TXCOAL_TICK_INT, 0); - } - tw32(HOSTCC_RXCOAL_MAXF_INT, 1); - tw32(HOSTCC_TXCOAL_MAXF_INT, 0); + tg3_set_coalesce(tp, &tp->coal); /* set status block DMA address */ tw32(HOSTCC_STATUS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, @@ -5388,8 +5473,6 @@ static int tg3_reset_hw(struct tg3 *tp) * the tg3_periodic_fetch_stats call there, and * tg3_get_stats to see how this works for 5705/5750 chips. */ - tw32(HOSTCC_STAT_COAL_TICKS, - DEFAULT_STAT_COAL_TICKS); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_HIGH, ((u64) tp->stats_mapping >> 32)); tw32(HOSTCC_STATS_BLK_HOST_ADDR + TG3_64BIT_REG_LOW, @@ -5445,7 +5528,8 @@ static int tg3_reset_hw(struct tg3 *tp) udelay(100); tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0); - tr32(MAILBOX_INTERRUPT_0); + tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW); + tp->last_tag = 0; if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) { tw32_f(DMAC_MODE, DMAC_MODE_ENABLE); @@ -5643,9 +5727,6 @@ static int tg3_reset_hw(struct tg3 *tp) tg3_write_sig_post_reset(tp, RESET_KIND_INIT); - if (tp->tg3_flags & TG3_FLAG_INIT_COMPLETE) - tg3_enable_ints(tp); - return 0; } @@ -5718,36 +5799,35 @@ static void tg3_periodic_fetch_stats(struct tg3 *tp) static void tg3_timer(unsigned long __opaque) { struct tg3 *tp = (struct tg3 *) __opaque; - unsigned long flags; - spin_lock_irqsave(&tp->lock, flags); - spin_lock(&tp->tx_lock); + spin_lock(&tp->lock); - /* All of this garbage is because when using non-tagged - * IRQ status the mailbox/status_block protocol the chip - * uses with the cpu is race prone. - */ - if (tp->hw_status->status & SD_STATUS_UPDATED) { - tw32(GRC_LOCAL_CTRL, - tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); - } else { - tw32(HOSTCC_MODE, tp->coalesce_mode | - (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); - } + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + /* All of this garbage is because when using non-tagged + * IRQ status the mailbox/status_block protocol the chip + * uses with the cpu is race prone. + */ + if (tp->hw_status->status & SD_STATUS_UPDATED) { + tw32(GRC_LOCAL_CTRL, + tp->grc_local_ctrl | GRC_LCLCTRL_SETINT); + } else { + tw32(HOSTCC_MODE, tp->coalesce_mode | + (HOSTCC_MODE_ENABLE | HOSTCC_MODE_NOW)); + } - if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { - tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); - schedule_work(&tp->reset_task); - return; + if (!(tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { + tp->tg3_flags2 |= TG3_FLG2_RESTART_TIMER; + spin_unlock(&tp->lock); + schedule_work(&tp->reset_task); + return; + } } - if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) - tg3_periodic_fetch_stats(tp); - /* This part only runs once per second. */ if (!--tp->timer_counter) { + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + tg3_periodic_fetch_stats(tp); + if (tp->tg3_flags & TG3_FLAG_USE_LINKCHG_REG) { u32 mac_stat; int phy_event; @@ -5805,8 +5885,7 @@ static void tg3_timer(unsigned long __opaque) tp->asf_counter = tp->asf_multiplier; } - spin_unlock(&tp->tx_lock); - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock(&tp->lock); tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); @@ -5818,6 +5897,9 @@ static int tg3_test_interrupt(struct tg3 *tp) int err, i; u32 int_mbox = 0; + if (!netif_running(dev)) + return -ENODEV; + tg3_disable_ints(tp); free_irq(tp->pdev->irq, dev); @@ -5846,9 +5928,13 @@ static int tg3_test_interrupt(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; @@ -5900,23 +5986,26 @@ static int tg3_test_msi(struct tg3 *tp) tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; - err = request_irq(tp->pdev->irq, tg3_interrupt, - SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + err = request_irq(tp->pdev->irq, fn, + SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) return err; /* Need to reset the chip because the MSI cycle may have terminated * with Master Abort. */ - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); err = tg3_init_hw(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (err) free_irq(tp->pdev->irq, dev); @@ -5929,14 +6018,12 @@ static int tg3_open(struct net_device *dev) struct tg3 *tp = netdev_priv(dev); int err; - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_disable_ints(tp); tp->tg3_flags &= ~TG3_FLAG_INIT_COMPLETE; - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); /* The placement of this call is tied * to the setup and use of Host TX descriptors. @@ -5948,7 +6035,13 @@ static int tg3_open(struct net_device *dev) if ((tp->tg3_flags2 & TG3_FLG2_5750_PLUS) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_AX) && (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5750_BX)) { - if (pci_enable_msi(tp->pdev) == 0) { + /* All MSI supporting chips should support tagged + * status. Assert that this is the case. + */ + if (!(tp->tg3_flags & TG3_FLAG_TAGGED_STATUS)) { + printk(KERN_WARNING PFX "%s: MSI without TAGGED? " + "Not using MSI.\n", tp->dev->name); + } else if (pci_enable_msi(tp->pdev) == 0) { u32 msi_mode; msi_mode = tr32(MSGINT_MODE); @@ -5959,9 +6052,14 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) err = request_irq(tp->pdev->irq, tg3_msi, SA_SAMPLE_RANDOM, dev->name, dev); - else - err = request_irq(tp->pdev->irq, tg3_interrupt, + else { + irqreturn_t (*fn)(int, void *, struct pt_regs *)=tg3_interrupt; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + fn = tg3_interrupt_tagged; + + err = request_irq(tp->pdev->irq, fn, SA_SHIRQ | SA_SAMPLE_RANDOM, dev->name, dev); + } if (err) { if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { @@ -5972,17 +6070,23 @@ static int tg3_open(struct net_device *dev) return err; } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); err = tg3_init_hw(tp); if (err) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); } else { - tp->timer_offset = HZ / 10; - tp->timer_counter = tp->timer_multiplier = 10; - tp->asf_counter = tp->asf_multiplier = (10 * 120); + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) + tp->timer_offset = HZ; + else + tp->timer_offset = HZ / 10; + + BUG_ON(tp->timer_offset > HZ); + tp->timer_counter = tp->timer_multiplier = + (HZ / tp->timer_offset); + tp->asf_counter = tp->asf_multiplier = + ((HZ / tp->timer_offset) * 120); init_timer(&tp->timer); tp->timer.expires = jiffies + tp->timer_offset; @@ -5990,8 +6094,7 @@ static int tg3_open(struct net_device *dev) tp->timer.function = tg3_timer; } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); if (err) { free_irq(tp->pdev->irq, dev); @@ -6005,34 +6108,31 @@ static int tg3_open(struct net_device *dev) if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { err = tg3_test_msi(tp); + if (err) { - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { pci_disable_msi(tp->pdev); tp->tg3_flags2 &= ~TG3_FLG2_USING_MSI; } - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tg3_free_consistent(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return err; } } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); add_timer(&tp->timer); tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; tg3_enable_ints(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); netif_start_queue(dev); @@ -6278,23 +6378,21 @@ static int tg3_close(struct net_device *dev) del_timer_sync(&tp->timer); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); #if 0 tg3_dump_state(tp); #endif tg3_disable_ints(tp); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_free_rings(tp); tp->tg3_flags &= ~(TG3_FLAG_INIT_COMPLETE | TG3_FLAG_GOT_SERDES_FLOWCTL); netif_carrier_off(tp->dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); free_irq(tp->pdev->irq, dev); if (tp->tg3_flags2 & TG3_FLG2_USING_MSI) { @@ -6331,16 +6429,15 @@ static unsigned long calc_crc_errors(struct tg3 *tp) if (!(tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) && (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5700 || GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5701)) { - unsigned long flags; u32 val; - spin_lock_irqsave(&tp->lock, flags); + spin_lock_bh(&tp->lock); if (!tg3_readphy(tp, 0x1e, &val)) { tg3_writephy(tp, 0x1e, val | 0x8000); tg3_readphy(tp, 0x14, &val); } else val = 0; - spin_unlock_irqrestore(&tp->lock, flags); + spin_unlock_bh(&tp->lock); tp->phy_crc_errors += val; @@ -6602,11 +6699,9 @@ static void tg3_set_rx_mode(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); __tg3_set_rx_mode(dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } #define TG3_REGDUMP_LEN (32 * 1024) @@ -6628,8 +6723,7 @@ static void tg3_get_regs(struct net_device *dev, memset(p, 0, TG3_REGDUMP_LEN); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); #define __GET_REG32(reg) (*(p)++ = tr32(reg)) #define GET_REG32_LOOP(base,len) \ @@ -6679,8 +6773,7 @@ do { p = (u32 *)(orig_p + (reg)); \ #undef GET_REG32_LOOP #undef GET_REG32_1 - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } static int tg3_get_eeprom_len(struct net_device *dev) @@ -6856,8 +6949,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) return -EINVAL; } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tp->link_config.autoneg = cmd->autoneg; if (cmd->autoneg == AUTONEG_ENABLE) { @@ -6873,8 +6965,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) if (netif_running(dev)) tg3_setup_phy(tp, 1); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -6910,12 +7001,12 @@ static int tg3_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) !(tp->tg3_flags & TG3_FLAG_SERDES_WOL_CAP)) return -EINVAL; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); if (wol->wolopts & WAKE_MAGIC) tp->tg3_flags |= TG3_FLAG_WOL_ENABLE; else tp->tg3_flags &= ~TG3_FLAG_WOL_ENABLE; - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -6955,7 +7046,7 @@ static int tg3_nway_reset(struct net_device *dev) if (!netif_running(dev)) return -EAGAIN; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); r = -EINVAL; tg3_readphy(tp, MII_BMCR, &bmcr); if (!tg3_readphy(tp, MII_BMCR, &bmcr) && @@ -6963,7 +7054,7 @@ static int tg3_nway_reset(struct net_device *dev) tg3_writephy(tp, MII_BMCR, bmcr | BMCR_ANRESTART); r = 0; } - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return r; } @@ -6985,17 +7076,19 @@ static void tg3_get_ringparam(struct net_device *dev, struct ethtool_ringparam * static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *ering) { struct tg3 *tp = netdev_priv(dev); + int irq_sync = 0; if ((ering->rx_pending > TG3_RX_RING_SIZE - 1) || (ering->rx_jumbo_pending > TG3_RX_JUMBO_RING_SIZE - 1) || (ering->tx_pending > TG3_TX_RING_SIZE - 1)) return -EINVAL; - if (netif_running(dev)) + if (netif_running(dev)) { tg3_netif_stop(tp); + irq_sync = 1; + } - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, irq_sync); tp->rx_pending = ering->rx_pending; @@ -7006,13 +7099,12 @@ static int tg3_set_ringparam(struct net_device *dev, struct ethtool_ringparam *e tp->tx_pending = ering->tx_pending; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } @@ -7029,12 +7121,15 @@ static void tg3_get_pauseparam(struct net_device *dev, struct ethtool_pauseparam static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause) { struct tg3 *tp = netdev_priv(dev); + int irq_sync = 0; - if (netif_running(dev)) + if (netif_running(dev)) { tg3_netif_stop(tp); + irq_sync = 1; + } + + tg3_full_lock(tp, irq_sync); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); if (epause->autoneg) tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; else @@ -7049,12 +7144,12 @@ static int tg3_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam tp->tg3_flags &= ~TG3_FLAG_TX_PAUSE; if (netif_running(dev)) { - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); tg3_init_hw(tp); tg3_netif_start(tp); } - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + + tg3_full_unlock(tp); return 0; } @@ -7075,12 +7170,12 @@ static int tg3_set_rx_csum(struct net_device *dev, u32 data) return 0; } - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); if (data) tp->tg3_flags |= TG3_FLAG_RX_CHECKSUMS; else tp->tg3_flags &= ~TG3_FLAG_RX_CHECKSUMS; - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return 0; } @@ -7108,12 +7203,20 @@ static int tg3_get_stats_count (struct net_device *dev) return TG3_NUM_STATS; } +static int tg3_get_test_count (struct net_device *dev) +{ + return TG3_NUM_TEST; +} + static void tg3_get_strings (struct net_device *dev, u32 stringset, u8 *buf) { switch (stringset) { case ETH_SS_STATS: memcpy(buf, ðtool_stats_keys, sizeof(ethtool_stats_keys)); break; + case ETH_SS_TEST: + memcpy(buf, ðtool_test_keys, sizeof(ethtool_test_keys)); + break; default: WARN_ON(1); /* we need a WARN() */ break; @@ -7127,6 +7230,517 @@ static void tg3_get_ethtool_stats (struct net_device *dev, memcpy(tmp_stats, tg3_get_estats(tp), sizeof(tp->estats)); } +#define NVRAM_TEST_SIZE 0x100 + +static int tg3_test_nvram(struct tg3 *tp) +{ + u32 *buf, csum; + int i, j, err = 0; + + buf = kmalloc(NVRAM_TEST_SIZE, GFP_KERNEL); + if (buf == NULL) + return -ENOMEM; + + for (i = 0, j = 0; i < NVRAM_TEST_SIZE; i += 4, j++) { + u32 val; + + if ((err = tg3_nvram_read(tp, i, &val)) != 0) + break; + buf[j] = cpu_to_le32(val); + } + if (i < NVRAM_TEST_SIZE) + goto out; + + err = -EIO; + if (cpu_to_be32(buf[0]) != TG3_EEPROM_MAGIC) + goto out; + + /* Bootstrap checksum at offset 0x10 */ + csum = calc_crc((unsigned char *) buf, 0x10); + if(csum != cpu_to_le32(buf[0x10/4])) + goto out; + + /* Manufacturing block starts at offset 0x74, checksum at 0xfc */ + csum = calc_crc((unsigned char *) &buf[0x74/4], 0x88); + if (csum != cpu_to_le32(buf[0xfc/4])) + goto out; + + err = 0; + +out: + kfree(buf); + return err; +} + +#define TG3_SERDES_TIMEOUT_SEC 2 +#define TG3_COPPER_TIMEOUT_SEC 6 + +static int tg3_test_link(struct tg3 *tp) +{ + int i, max; + + if (!netif_running(tp->dev)) + return -ENODEV; + + if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) + max = TG3_SERDES_TIMEOUT_SEC; + else + max = TG3_COPPER_TIMEOUT_SEC; + + for (i = 0; i < max; i++) { + if (netif_carrier_ok(tp->dev)) + return 0; + + if (msleep_interruptible(1000)) + break; + } + + return -EIO; +} + +/* Only test the commonly used registers */ +static int tg3_test_registers(struct tg3 *tp) +{ + int i, is_5705; + u32 offset, read_mask, write_mask, val, save_val, read_val; + static struct { + u16 offset; + u16 flags; +#define TG3_FL_5705 0x1 +#define TG3_FL_NOT_5705 0x2 +#define TG3_FL_NOT_5788 0x4 + u32 read_mask; + u32 write_mask; + } reg_tbl[] = { + /* MAC Control Registers */ + { MAC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00ef6f8c }, + { MAC_MODE, TG3_FL_5705, + 0x00000000, 0x01ef6b8c }, + { MAC_STATUS, TG3_FL_NOT_5705, + 0x03800107, 0x00000000 }, + { MAC_STATUS, TG3_FL_5705, + 0x03800100, 0x00000000 }, + { MAC_ADDR_0_HIGH, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_ADDR_0_LOW, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_RX_MTU_SIZE, 0x0000, + 0x00000000, 0x0000ffff }, + { MAC_TX_MODE, 0x0000, + 0x00000000, 0x00000070 }, + { MAC_TX_LENGTHS, 0x0000, + 0x00000000, 0x00003fff }, + { MAC_RX_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x000007fc }, + { MAC_RX_MODE, TG3_FL_5705, + 0x00000000, 0x000007dc }, + { MAC_HASH_REG_0, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_1, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_2, 0x0000, + 0x00000000, 0xffffffff }, + { MAC_HASH_REG_3, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive Data and Receive BD Initiator Control Registers. */ + { RCVDBDI_JUMBO_BD+0, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_JUMBO_BD+8, TG3_FL_NOT_5705, + 0x00000000, 0x00000003 }, + { RCVDBDI_JUMBO_BD+0xc, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+0, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+4, 0x0000, + 0x00000000, 0xffffffff }, + { RCVDBDI_STD_BD+8, 0x0000, + 0x00000000, 0xffff0002 }, + { RCVDBDI_STD_BD+0xc, 0x0000, + 0x00000000, 0xffffffff }, + + /* Receive BD Initiator Control Registers. */ + { RCVBDI_STD_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { RCVBDI_STD_THRESH, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { RCVBDI_JUMBO_THRESH, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + + /* Host Coalescing Control Registers. */ + { HOSTCC_MODE, TG3_FL_NOT_5705, + 0x00000000, 0x00000004 }, + { HOSTCC_MODE, TG3_FL_5705, + 0x00000000, 0x000000f6 }, + { HOSTCC_RXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOL_TICKS, TG3_FL_5705, + 0x00000000, 0x000003ff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXMAX_FRAMES, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_RXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_TICK_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_RXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_TXCOAL_MAXF_INT, TG3_FL_5705 | TG3_FL_NOT_5788, + 0x00000000, 0x000000ff }, + { HOSTCC_STAT_COAL_TICKS, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_HOST_ADDR+4, TG3_FL_NOT_5705, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATUS_BLK_HOST_ADDR+4, 0x0000, + 0x00000000, 0xffffffff }, + { HOSTCC_STATS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + { HOSTCC_STATUS_BLK_NIC_ADDR, 0x0000, + 0xffffffff, 0x00000000 }, + + /* Buffer Manager Control Registers. */ + { BUFMGR_MB_POOL_ADDR, 0x0000, + 0x00000000, 0x007fff80 }, + { BUFMGR_MB_POOL_SIZE, 0x0000, + 0x00000000, 0x007fffff }, + { BUFMGR_MB_RDMA_LOW_WATER, 0x0000, + 0x00000000, 0x0000003f }, + { BUFMGR_MB_MACRX_LOW_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_MB_HIGH_WATER, 0x0000, + 0x00000000, 0x000001ff }, + { BUFMGR_DMA_DESC_POOL_ADDR, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + { BUFMGR_DMA_DESC_POOL_SIZE, TG3_FL_NOT_5705, + 0xffffffff, 0x00000000 }, + + /* Mailbox Registers */ + { GRCMBOX_RCVSTD_PROD_IDX+4, 0x0000, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVJUMBO_PROD_IDX+4, TG3_FL_NOT_5705, + 0x00000000, 0x000001ff }, + { GRCMBOX_RCVRET_CON_IDX_0+4, 0x0000, + 0x00000000, 0x000007ff }, + { GRCMBOX_SNDHOST_PROD_IDX_0+4, 0x0000, + 0x00000000, 0x000001ff }, + + { 0xffff, 0x0000, 0x00000000, 0x00000000 }, + }; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + is_5705 = 1; + else + is_5705 = 0; + + for (i = 0; reg_tbl[i].offset != 0xffff; i++) { + if (is_5705 && (reg_tbl[i].flags & TG3_FL_NOT_5705)) + continue; + + if (!is_5705 && (reg_tbl[i].flags & TG3_FL_5705)) + continue; + + if ((tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (reg_tbl[i].flags & TG3_FL_NOT_5788)) + continue; + + offset = (u32) reg_tbl[i].offset; + read_mask = reg_tbl[i].read_mask; + write_mask = reg_tbl[i].write_mask; + + /* Save the original register content */ + save_val = tr32(offset); + + /* Determine the read-only value. */ + read_val = save_val & read_mask; + + /* Write zero to the register, then make sure the read-only bits + * are not changed and the read/write bits are all zeros. + */ + tw32(offset, 0); + + val = tr32(offset); + + /* Test the read-only and read/write bits. */ + if (((val & read_mask) != read_val) || (val & write_mask)) + goto out; + + /* Write ones to all the bits defined by RdMask and WrMask, then + * make sure the read-only bits are not changed and the + * read/write bits are all ones. + */ + tw32(offset, read_mask | write_mask); + + val = tr32(offset); + + /* Test the read-only bits. */ + if ((val & read_mask) != read_val) + goto out; + + /* Test the read/write bits. */ + if ((val & write_mask) != write_mask) + goto out; + + tw32(offset, save_val); + } + + return 0; + +out: + printk(KERN_ERR PFX "Register test failed at offset %x\n", offset); + tw32(offset, save_val); + return -EIO; +} + +static int tg3_do_mem_test(struct tg3 *tp, u32 offset, u32 len) +{ + static u32 test_pattern[] = { 0x00000000, 0xffffffff, 0xaa55a55a }; + int i; + u32 j; + + for (i = 0; i < sizeof(test_pattern)/sizeof(u32); i++) { + for (j = 0; j < len; j += 4) { + u32 val; + + tg3_write_mem(tp, offset + j, test_pattern[i]); + tg3_read_mem(tp, offset + j, &val); + if (val != test_pattern[i]) + return -EIO; + } + } + return 0; +} + +static int tg3_test_memory(struct tg3 *tp) +{ + static struct mem_entry { + u32 offset; + u32 len; + } mem_tbl_570x[] = { + { 0x00000000, 0x01000}, + { 0x00002000, 0x1c000}, + { 0xffffffff, 0x00000} + }, mem_tbl_5705[] = { + { 0x00000100, 0x0000c}, + { 0x00000200, 0x00008}, + { 0x00000b50, 0x00400}, + { 0x00004000, 0x00800}, + { 0x00006000, 0x01000}, + { 0x00008000, 0x02000}, + { 0x00010000, 0x0e000}, + { 0xffffffff, 0x00000} + }; + struct mem_entry *mem_tbl; + int err = 0; + int i; + + if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) + mem_tbl = mem_tbl_5705; + else + mem_tbl = mem_tbl_570x; + + for (i = 0; mem_tbl[i].offset != 0xffffffff; i++) { + if ((err = tg3_do_mem_test(tp, mem_tbl[i].offset, + mem_tbl[i].len)) != 0) + break; + } + + return err; +} + +static int tg3_test_loopback(struct tg3 *tp) +{ + u32 mac_mode, send_idx, rx_start_idx, rx_idx, tx_idx, opaque_key; + u32 desc_idx; + struct sk_buff *skb, *rx_skb; + u8 *tx_data; + dma_addr_t map; + int num_pkts, tx_len, rx_len, i, err; + struct tg3_rx_buffer_desc *desc; + + if (!netif_running(tp->dev)) + return -ENODEV; + + err = -EIO; + + tg3_abort_hw(tp, 1); + + tg3_reset_hw(tp); + + mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) | + MAC_MODE_PORT_INT_LPBACK | MAC_MODE_LINK_POLARITY | + MAC_MODE_PORT_MODE_GMII; + tw32(MAC_MODE, mac_mode); + + tx_len = 1514; + skb = dev_alloc_skb(tx_len); + tx_data = skb_put(skb, tx_len); + memcpy(tx_data, tp->dev->dev_addr, 6); + memset(tx_data + 6, 0x0, 8); + + tw32(MAC_RX_MTU_SIZE, tx_len + 4); + + for (i = 14; i < tx_len; i++) + tx_data[i] = (u8) (i & 0xff); + + map = pci_map_single(tp->pdev, skb->data, tx_len, PCI_DMA_TODEVICE); + + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + rx_start_idx = tp->hw_status->idx[0].rx_producer; + + send_idx = 0; + num_pkts = 0; + + tg3_set_txd(tp, send_idx, map, tx_len, 0, 1); + + send_idx++; + num_pkts++; + + tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx); + tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW); + + udelay(10); + + for (i = 0; i < 10; i++) { + tw32_f(HOSTCC_MODE, tp->coalesce_mode | HOSTCC_MODE_ENABLE | + HOSTCC_MODE_NOW); + + udelay(10); + + tx_idx = tp->hw_status->idx[0].tx_consumer; + rx_idx = tp->hw_status->idx[0].rx_producer; + if ((tx_idx == send_idx) && + (rx_idx == (rx_start_idx + num_pkts))) + break; + } + + pci_unmap_single(tp->pdev, map, tx_len, PCI_DMA_TODEVICE); + dev_kfree_skb(skb); + + if (tx_idx != send_idx) + goto out; + + if (rx_idx != rx_start_idx + num_pkts) + goto out; + + desc = &tp->rx_rcb[rx_start_idx]; + desc_idx = desc->opaque & RXD_OPAQUE_INDEX_MASK; + opaque_key = desc->opaque & RXD_OPAQUE_RING_MASK; + if (opaque_key != RXD_OPAQUE_RING_STD) + goto out; + + if ((desc->err_vlan & RXD_ERR_MASK) != 0 && + (desc->err_vlan != RXD_ERR_ODD_NIBBLE_RCVD_MII)) + goto out; + + rx_len = ((desc->idx_len & RXD_LEN_MASK) >> RXD_LEN_SHIFT) - 4; + if (rx_len != tx_len) + goto out; + + rx_skb = tp->rx_std_buffers[desc_idx].skb; + + map = pci_unmap_addr(&tp->rx_std_buffers[desc_idx], mapping); + pci_dma_sync_single_for_cpu(tp->pdev, map, rx_len, PCI_DMA_FROMDEVICE); + + for (i = 14; i < tx_len; i++) { + if (*(rx_skb->data + i) != (u8) (i & 0xff)) + goto out; + } + err = 0; + + /* tg3_free_rings will unmap and free the rx_skb */ +out: + return err; +} + +static void tg3_self_test(struct net_device *dev, struct ethtool_test *etest, + u64 *data) +{ + struct tg3 *tp = netdev_priv(dev); + + memset(data, 0, sizeof(u64) * TG3_NUM_TEST); + + if (tg3_test_nvram(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[0] = 1; + } + if (tg3_test_link(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[1] = 1; + } + if (etest->flags & ETH_TEST_FL_OFFLINE) { + int irq_sync = 0; + + if (netif_running(dev)) { + tg3_netif_stop(tp); + irq_sync = 1; + } + + tg3_full_lock(tp, irq_sync); + + tg3_halt(tp, RESET_KIND_SUSPEND, 1); + tg3_nvram_lock(tp); + tg3_halt_cpu(tp, RX_CPU_BASE); + if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) + tg3_halt_cpu(tp, TX_CPU_BASE); + tg3_nvram_unlock(tp); + + if (tg3_test_registers(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[2] = 1; + } + if (tg3_test_memory(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[3] = 1; + } + if (tg3_test_loopback(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[4] = 1; + } + + tg3_full_unlock(tp); + + if (tg3_test_interrupt(tp) != 0) { + etest->flags |= ETH_TEST_FL_FAILED; + data[5] = 1; + } + + tg3_full_lock(tp, 0); + + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + if (netif_running(dev)) { + tp->tg3_flags |= TG3_FLAG_INIT_COMPLETE; + tg3_init_hw(tp); + tg3_netif_start(tp); + } + + tg3_full_unlock(tp); + } +} + static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) { struct mii_ioctl_data *data = if_mii(ifr); @@ -7144,9 +7758,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (tp->tg3_flags2 & TG3_FLG2_PHY_SERDES) break; /* We have no PHY */ - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); err = tg3_readphy(tp, data->reg_num & 0x1f, &mii_regval); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); data->val_out = mii_regval; @@ -7160,9 +7774,9 @@ static int tg3_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) if (!capable(CAP_NET_ADMIN)) return -EPERM; - spin_lock_irq(&tp->lock); + spin_lock_bh(&tp->lock); err = tg3_writephy(tp, data->reg_num & 0x1f, data->val_in); - spin_unlock_irq(&tp->lock); + spin_unlock_bh(&tp->lock); return err; @@ -7178,31 +7792,35 @@ static void tg3_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tp->vlgrp = grp; /* Update RX_MODE_KEEP_VLAN_TAG bit in RX_MODE register. */ __tg3_set_rx_mode(dev); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } static void tg3_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) { struct tg3 *tp = netdev_priv(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); if (tp->vlgrp) tp->vlgrp->vlan_devices[vid] = NULL; - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } #endif +static int tg3_get_coalesce(struct net_device *dev, struct ethtool_coalesce *ec) +{ + struct tg3 *tp = netdev_priv(dev); + + memcpy(ec, &tp->coal, sizeof(*ec)); + return 0; +} + static struct ethtool_ops tg3_ethtool_ops = { .get_settings = tg3_get_settings, .set_settings = tg3_set_settings, @@ -7232,9 +7850,12 @@ static struct ethtool_ops tg3_ethtool_ops = { .get_tso = ethtool_op_get_tso, .set_tso = tg3_set_tso, #endif + .self_test_count = tg3_get_test_count, + .self_test = tg3_self_test, .get_strings = tg3_get_strings, .get_stats_count = tg3_get_stats_count, .get_ethtool_stats = tg3_get_ethtool_stats, + .get_coalesce = tg3_get_coalesce, }; static void __devinit tg3_get_eeprom_size(struct tg3 *tp) @@ -7914,6 +8535,16 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp) case NIC_SRAM_DATA_CFG_LED_MODE_MAC: tp->led_ctrl = LED_CTRL_MODE_MAC; + + /* Default to PHY_1_MODE if 0 (MAC_MODE) is + * read on some older 5700/5701 bootcode. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5700 || + GET_ASIC_REV(tp->pci_chip_rev_id) == + ASIC_REV_5701) + tp->led_ctrl = LED_CTRL_MODE_PHY_1; + break; case SHASTA_EXT_LED_SHARED: @@ -8422,15 +9053,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (tp->tg3_flags2 & TG3_FLG2_5705_PLUS) tp->tg3_flags2 |= TG3_FLG2_PHY_BER_BUG; - /* Only 5701 and later support tagged irq status mode. - * Also, 5788 chips cannot use tagged irq status. - * - * However, since we are using NAPI avoid tagged irq status - * because the interrupt condition is more difficult to - * fully clear in that mode. - */ tp->coalesce_mode = 0; - if (GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_AX && GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5700_BX) tp->coalesce_mode |= HOSTCC_MODE_32BYTE; @@ -8494,6 +9117,18 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) grc_misc_cfg == GRC_MISC_CFG_BOARD_ID_5788M)) tp->tg3_flags2 |= TG3_FLG2_IS_5788; + if (!(tp->tg3_flags2 & TG3_FLG2_IS_5788) && + (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700)) + tp->tg3_flags |= TG3_FLAG_TAGGED_STATUS; + if (tp->tg3_flags & TG3_FLAG_TAGGED_STATUS) { + tp->coalesce_mode |= (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD); + + tp->misc_host_ctrl |= MISC_HOST_CTRL_TAGGED_STATUS; + pci_write_config_dword(tp->pdev, TG3PCI_MISC_HOST_CTRL, + tp->misc_host_ctrl); + } + /* these are limited to 10/100 only */ if ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5703 && (grc_misc_cfg == 0x8000 || grc_misc_cfg == 0x4000)) || @@ -8671,6 +9306,146 @@ static int __devinit tg3_get_device_address(struct tg3 *tp) return 0; } +#define BOUNDARY_SINGLE_CACHELINE 1 +#define BOUNDARY_MULTI_CACHELINE 2 + +static u32 __devinit tg3_calc_dma_bndry(struct tg3 *tp, u32 val) +{ + int cacheline_size; + u8 byte; + int goal; + + pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); + if (byte == 0) + cacheline_size = 1024; + else + cacheline_size = (int) byte * 4; + + /* On 5703 and later chips, the boundary bits have no + * effect. + */ + if (GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5700 && + GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701 && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) + goto out; + +#if defined(CONFIG_PPC64) || defined(CONFIG_IA64) || defined(CONFIG_PARISC) + goal = BOUNDARY_MULTI_CACHELINE; +#else +#if defined(CONFIG_SPARC64) || defined(CONFIG_ALPHA) + goal = BOUNDARY_SINGLE_CACHELINE; +#else + goal = 0; +#endif +#endif + + if (!goal) + goto out; + + /* PCI controllers on most RISC systems tend to disconnect + * when a device tries to burst across a cache-line boundary. + * Therefore, letting tg3 do so just wastes PCI bandwidth. + * + * Unfortunately, for PCI-E there are only limited + * write-side controls for this, and thus for reads + * we will still get the disconnects. We'll also waste + * these PCI cycles for both read and write for chips + * other than 5700 and 5701 which do not implement the + * boundary bits. + */ + if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && + !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128_PCIX | + DMA_RWCTRL_WRITE_BNDRY_128_PCIX); + } else { + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + } + break; + + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256_PCIX | + DMA_RWCTRL_WRITE_BNDRY_256_PCIX); + break; + + default: + val |= (DMA_RWCTRL_READ_BNDRY_384_PCIX | + DMA_RWCTRL_WRITE_BNDRY_384_PCIX); + break; + }; + } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { + switch (cacheline_size) { + case 16: + case 32: + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_64_PCIE; + break; + } + /* fallthrough */ + case 128: + default: + val &= ~DMA_RWCTRL_WRITE_BNDRY_DISAB_PCIE; + val |= DMA_RWCTRL_WRITE_BNDRY_128_PCIE; + break; + }; + } else { + switch (cacheline_size) { + case 16: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_16 | + DMA_RWCTRL_WRITE_BNDRY_16); + break; + } + /* fallthrough */ + case 32: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_32 | + DMA_RWCTRL_WRITE_BNDRY_32); + break; + } + /* fallthrough */ + case 64: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_64 | + DMA_RWCTRL_WRITE_BNDRY_64); + break; + } + /* fallthrough */ + case 128: + if (goal == BOUNDARY_SINGLE_CACHELINE) { + val |= (DMA_RWCTRL_READ_BNDRY_128 | + DMA_RWCTRL_WRITE_BNDRY_128); + break; + } + /* fallthrough */ + case 256: + val |= (DMA_RWCTRL_READ_BNDRY_256 | + DMA_RWCTRL_WRITE_BNDRY_256); + break; + case 512: + val |= (DMA_RWCTRL_READ_BNDRY_512 | + DMA_RWCTRL_WRITE_BNDRY_512); + break; + case 1024: + default: + val |= (DMA_RWCTRL_READ_BNDRY_1024 | + DMA_RWCTRL_WRITE_BNDRY_1024); + break; + }; + } + +out: + return val; +} + static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dma, int size, int to_device) { struct tg3_internal_buffer_desc test_desc; @@ -8752,12 +9527,12 @@ static int __devinit tg3_do_test_dma(struct tg3 *tp, u32 *buf, dma_addr_t buf_dm return ret; } -#define TEST_BUFFER_SIZE 0x400 +#define TEST_BUFFER_SIZE 0x2000 static int __devinit tg3_test_dma(struct tg3 *tp) { dma_addr_t buf_dma; - u32 *buf; + u32 *buf, saved_dma_rwctrl; int ret; buf = pci_alloc_consistent(tp->pdev, TEST_BUFFER_SIZE, &buf_dma); @@ -8769,46 +9544,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) tp->dma_rwctrl = ((0x7 << DMA_RWCTRL_PCI_WRITE_CMD_SHIFT) | (0x6 << DMA_RWCTRL_PCI_READ_CMD_SHIFT)); -#ifndef CONFIG_X86 - { - u8 byte; - int cacheline_size; - pci_read_config_byte(tp->pdev, PCI_CACHE_LINE_SIZE, &byte); - - if (byte == 0) - cacheline_size = 1024; - else - cacheline_size = (int) byte * 4; - - switch (cacheline_size) { - case 16: - case 32: - case 64: - case 128: - if ((tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) { - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_384_PCIX; - break; - } else if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { - tp->dma_rwctrl &= - ~(DMA_RWCTRL_PCI_WRITE_CMD); - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_128_PCIE; - break; - } - /* fallthrough */ - case 256: - if (!(tp->tg3_flags & TG3_FLAG_PCIX_MODE) && - !(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256; - else if (!(tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)) - tp->dma_rwctrl |= - DMA_RWCTRL_WRITE_BNDRY_256_PCIX; - }; - } -#endif + tp->dma_rwctrl = tg3_calc_dma_bndry(tp, tp->dma_rwctrl); if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS) { /* DMA read watermark not used on PCIE */ @@ -8827,7 +9563,7 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (ccval == 0x6 || ccval == 0x7) tp->dma_rwctrl |= DMA_RWCTRL_ONE_DMA; - /* Set bit 23 to renable PCIX hw bug fix */ + /* Set bit 23 to enable PCIX hw bug fix */ tp->dma_rwctrl |= 0x009f0000; } else { tp->dma_rwctrl |= 0x001b000f; @@ -8868,6 +9604,13 @@ static int __devinit tg3_test_dma(struct tg3 *tp) GET_ASIC_REV(tp->pci_chip_rev_id) != ASIC_REV_5701) goto out; + /* It is best to perform DMA test with maximum write burst size + * to expose the 5700/5701 write DMA bug. + */ + saved_dma_rwctrl = tp->dma_rwctrl; + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + while (1) { u32 *p = buf, i; @@ -8906,8 +9649,9 @@ static int __devinit tg3_test_dma(struct tg3 *tp) if (p[i] == i) continue; - if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) == - DMA_RWCTRL_WRITE_BNDRY_DISAB) { + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); break; @@ -8924,6 +9668,28 @@ static int __devinit tg3_test_dma(struct tg3 *tp) break; } } + if ((tp->dma_rwctrl & DMA_RWCTRL_WRITE_BNDRY_MASK) != + DMA_RWCTRL_WRITE_BNDRY_16) { + static struct pci_device_id dma_wait_state_chipsets[] = { + { PCI_DEVICE(PCI_VENDOR_ID_APPLE, + PCI_DEVICE_ID_APPLE_UNI_N_PCI15) }, + { }, + }; + + /* DMA test passed without adjusting DMA boundary, + * now look for chipsets that are known to expose the + * DMA bug without failing the test. + */ + if (pci_dev_present(dma_wait_state_chipsets)) { + tp->dma_rwctrl &= ~DMA_RWCTRL_WRITE_BNDRY_MASK; + tp->dma_rwctrl |= DMA_RWCTRL_WRITE_BNDRY_16; + } + else + /* Safe to use the calculated DMA boundary. */ + tp->dma_rwctrl = saved_dma_rwctrl; + + tw32(TG3PCI_DMA_RW_CTRL, tp->dma_rwctrl); + } out: pci_free_consistent(tp->pdev, TEST_BUFFER_SIZE, buf, buf_dma); @@ -9011,6 +9777,31 @@ static struct pci_dev * __devinit tg3_find_5704_peer(struct tg3 *tp) return peer; } +static void __devinit tg3_init_coal(struct tg3 *tp) +{ + struct ethtool_coalesce *ec = &tp->coal; + + memset(ec, 0, sizeof(*ec)); + ec->cmd = ETHTOOL_GCOALESCE; + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS; + ec->rx_max_coalesced_frames = LOW_RXMAX_FRAMES; + ec->tx_max_coalesced_frames = LOW_TXMAX_FRAMES; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT; + ec->rx_max_coalesced_frames_irq = DEFAULT_RXCOAL_MAXF_INT; + ec->tx_max_coalesced_frames_irq = DEFAULT_TXCOAL_MAXF_INT; + ec->stats_block_coalesce_usecs = DEFAULT_STAT_COAL_TICKS; + + if (tp->coalesce_mode & (HOSTCC_MODE_CLRTICK_RXBD | + HOSTCC_MODE_CLRTICK_TXBD)) { + ec->rx_coalesce_usecs = LOW_RXCOL_TICKS_CLRTCKS; + ec->rx_coalesce_usecs_irq = DEFAULT_RXCOAL_TICK_INT_CLRTCKS; + ec->tx_coalesce_usecs = LOW_TXCOL_TICKS_CLRTCKS; + ec->tx_coalesce_usecs_irq = DEFAULT_TXCOAL_TICK_INT_CLRTCKS; + } +} + static int __devinit tg3_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -9232,7 +10023,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tr32(WDMAC_MODE) & WDMAC_MODE_ENABLE)) { pci_save_state(tp->pdev); tw32(MEMARB_MODE, MEMARB_MODE_ENABLE); - tg3_halt(tp, 1); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); } err = tg3_test_dma(tp); @@ -9256,6 +10047,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, /* flow control autonegotiation is default behavior */ tp->tg3_flags |= TG3_FLAG_PAUSE_AUTONEG; + tg3_init_coal(tp); + err = register_netdev(dev); if (err) { printk(KERN_ERR PFX "Cannot register net device, " @@ -9298,6 +10091,8 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, (tp->tg3_flags & TG3_FLAG_SPLIT_MODE) != 0, (tp->tg3_flags2 & TG3_FLG2_NO_ETH_WIRE_SPEED) == 0, (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) != 0); + printk(KERN_INFO "%s: dma_rwctrl[%08x]\n", + dev->name, tp->dma_rwctrl); return 0; @@ -9345,24 +10140,19 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) del_timer_sync(&tp->timer); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 1); tg3_disable_ints(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); netif_device_detach(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); - tg3_halt(tp, 1); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_lock(tp, 0); + tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); + tg3_full_unlock(tp); err = tg3_set_power_state(tp, pci_choose_state(pdev, state)); if (err) { - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_init_hw(tp); @@ -9372,8 +10162,7 @@ static int tg3_suspend(struct pci_dev *pdev, pm_message_t state) netif_device_attach(dev); tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); } return err; @@ -9396,20 +10185,16 @@ static int tg3_resume(struct pci_dev *pdev) netif_device_attach(dev); - spin_lock_irq(&tp->lock); - spin_lock(&tp->tx_lock); + tg3_full_lock(tp, 0); tg3_init_hw(tp); tp->timer.expires = jiffies + tp->timer_offset; add_timer(&tp->timer); - tg3_enable_ints(tp); - tg3_netif_start(tp); - spin_unlock(&tp->tx_lock); - spin_unlock_irq(&tp->lock); + tg3_full_unlock(tp); return 0; } diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index 8de6f21037b..99c5f9675a5 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -876,10 +876,12 @@ #define HOSTCC_STATUS_ERROR_ATTN 0x00000004 #define HOSTCC_RXCOL_TICKS 0x00003c08 #define LOW_RXCOL_TICKS 0x00000032 +#define LOW_RXCOL_TICKS_CLRTCKS 0x00000014 #define DEFAULT_RXCOL_TICKS 0x00000048 #define HIGH_RXCOL_TICKS 0x00000096 #define HOSTCC_TXCOL_TICKS 0x00003c0c #define LOW_TXCOL_TICKS 0x00000096 +#define LOW_TXCOL_TICKS_CLRTCKS 0x00000048 #define DEFAULT_TXCOL_TICKS 0x0000012c #define HIGH_TXCOL_TICKS 0x00000145 #define HOSTCC_RXMAX_FRAMES 0x00003c10 @@ -892,8 +894,10 @@ #define HIGH_TXMAX_FRAMES 0x00000052 #define HOSTCC_RXCOAL_TICK_INT 0x00003c18 #define DEFAULT_RXCOAL_TICK_INT 0x00000019 +#define DEFAULT_RXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_TXCOAL_TICK_INT 0x00003c1c #define DEFAULT_TXCOAL_TICK_INT 0x00000019 +#define DEFAULT_TXCOAL_TICK_INT_CLRTCKS 0x00000014 #define HOSTCC_RXCOAL_MAXF_INT 0x00003c20 #define DEFAULT_RXCOAL_MAXF_INT 0x00000005 #define HOSTCC_TXCOAL_MAXF_INT 0x00003c24 @@ -2002,17 +2006,31 @@ struct tg3_ethtool_stats { struct tg3 { /* begin "general, frequently-used members" cacheline section */ + /* If the IRQ handler (which runs lockless) needs to be + * quiesced, the following bitmask state is used. The + * SYNC flag is set by non-IRQ context code to initiate + * the quiescence. + * + * When the IRQ handler notices that SYNC is set, it + * disables interrupts and returns. + * + * When all outstanding IRQ handlers have returned after + * the SYNC flag has been set, the setter can be assured + * that interrupts will no longer get run. + * + * In this way all SMP driver locks are never acquired + * in hw IRQ context, only sw IRQ context or lower. + */ + unsigned int irq_sync; + /* SMP locking strategy: * * lock: Held during all operations except TX packet * processing. * - * tx_lock: Held during tg3_start_xmit{,_4gbug} and tg3_tx + * tx_lock: Held during tg3_start_xmit and tg3_tx * - * If you want to shut up all asynchronous processing you must - * acquire both locks, 'lock' taken before 'tx_lock'. IRQs must - * be disabled to take 'lock' but only softirq disabling is - * necessary for acquisition of 'tx_lock'. + * Both of these locks are to be held with BH safety. */ spinlock_t lock; spinlock_t indirect_lock; @@ -2023,6 +2041,7 @@ struct tg3 { struct tg3_hw_status *hw_status; dma_addr_t status_mapping; + u32 last_tag; u32 msg_enable; @@ -2068,6 +2087,7 @@ struct tg3 { u32 rx_offset; u32 tg3_flags; +#define TG3_FLAG_TAGGED_STATUS 0x00000001 #define TG3_FLAG_TXD_MBOX_HWBUG 0x00000002 #define TG3_FLAG_RX_CHECKSUMS 0x00000004 #define TG3_FLAG_USE_LINKCHG_REG 0x00000008 @@ -2225,7 +2245,7 @@ struct tg3 { #define SST_25VF0X0_PAGE_SIZE 4098 - + struct ethtool_coalesce coal; }; #endif /* !(_T3_H) */ diff --git a/drivers/net/tlan.c b/drivers/net/tlan.c index a7ffa64502d..cf31c062985 100644 --- a/drivers/net/tlan.c +++ b/drivers/net/tlan.c @@ -193,6 +193,12 @@ static int aui[MAX_TLAN_BOARDS]; static int duplex[MAX_TLAN_BOARDS]; static int speed[MAX_TLAN_BOARDS]; static int boards_found; +module_param_array(aui, int, NULL, 0); +module_param_array(duplex, int, NULL, 0); +module_param_array(speed, int, NULL, 0); +MODULE_PARM_DESC(aui, "ThunderLAN use AUI port(s) (0-1)"); +MODULE_PARM_DESC(duplex, "ThunderLAN duplex setting(s) (0-default, 1-half, 2-full)"); +MODULE_PARM_DESC(speed, "ThunderLAN port speen setting(s) (0,10,100)"); MODULE_AUTHOR("Maintainer: Samuel Chessman <chessman@tux.org>"); MODULE_DESCRIPTION("Driver for TI ThunderLAN based ethernet PCI adapters"); @@ -204,8 +210,13 @@ MODULE_LICENSE("GPL"); /* Turn on debugging. See Documentation/networking/tlan.txt for details */ static int debug; +module_param(debug, int, 0); +MODULE_PARM_DESC(debug, "ThunderLAN debug mask"); static int bbuf; +module_param(bbuf, int, 0); +MODULE_PARM_DESC(bbuf, "ThunderLAN use big buffer (0-1)"); + static u8 *TLanPadBuffer; static dma_addr_t TLanPadBufferDMA; static char TLanSignature[] = "TLAN"; @@ -2381,6 +2392,7 @@ TLan_FinishReset( struct net_device *dev ) TLan_SetTimer( dev, (10*HZ), TLAN_TIMER_FINISH_RESET ); return; } + TLan_SetMulticastList(dev); } /* TLan_FinishReset */ @@ -2807,7 +2819,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if (priv->link) { priv->link = 0; printk(KERN_DEBUG "TLAN: %s has lost link\n", dev->name); - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); TLan_SetTimer( dev, (2*HZ), TLAN_TIMER_LINK_BEAT ); return; } @@ -2817,7 +2829,7 @@ void TLan_PhyMonitor( struct net_device *dev ) if ((phy_status & MII_GS_LINK) && !priv->link) { priv->link = 1; printk(KERN_DEBUG "TLAN: %s has reestablished link\n", dev->name); - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); } /* Setup a new monitor */ diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c index c098863bdd9..3873917a9c2 100644 --- a/drivers/net/tokenring/ibmtr.c +++ b/drivers/net/tokenring/ibmtr.c @@ -888,11 +888,6 @@ static int tok_open(struct net_device *dev) ti->sap_status = CLOSED; /* CLOSED or OPEN */ ti->open_failure = NO; /* NO or YES */ ti->open_mode = MANUAL; /* MANUAL or AUTOMATIC */ - /* 12/2000 not typical Linux, but we can use RUNNING to let us know when - the network has crapped out or cables are disconnected. Useful because - the IFF_UP flag stays up the whole time, until ifconfig tr0 down. - */ - dev->flags &= ~IFF_RUNNING; ti->sram_phys &= ~1; /* to reverse what we do in tok_close */ /* init the spinlock */ @@ -1242,7 +1237,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ti->open_status = CLOSED; ti->sap_status = CLOSED; ti->open_mode = AUTOMATIC; - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); netif_stop_queue(dev); ti->open_action = RESTART; outb(0, dev->base_addr + ADAPTRESET); @@ -1323,7 +1318,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) break; } netif_wake_queue(dev); - dev->flags |= IFF_RUNNING;/*BMS 12/2000*/ + netif_carrier_on(dev); break; case DIR_INTERRUPT: case DIR_MOD_OPEN_PARAMS: @@ -1427,7 +1422,7 @@ irqreturn_t tok_interrupt(int irq, void *dev_id, struct pt_regs *regs) ring_status); if(ring_status& (REMOVE_RECV|AUTO_REMOVAL|LOBE_FAULT)){ netif_stop_queue(dev); - dev->flags &= ~IFF_RUNNING;/*not typical Linux*/ + netif_carrier_off(dev); DPRINTK("Remove received, or Auto-removal error" ", or Lobe fault\n"); DPRINTK("We'll try to reopen the closed adapter" diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c index edae09a4b02..919c40cd635 100644 --- a/drivers/net/tulip/media.c +++ b/drivers/net/tulip/media.c @@ -174,6 +174,7 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val) break; } spin_unlock_irqrestore(&tp->mii_lock, flags); + return; } /* Establish sync by sending 32 logic ones. */ diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index d098b3ba353..e0ae3ed6e57 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1104,7 +1104,7 @@ static void set_rx_mode(struct net_device *dev) if (entry != 0) { /* Avoid a chip errata by prefixing a dummy entry. Don't do this on the ULI526X as it triggers a different problem */ - if (!(tp->chip_id == ULI526X && (tp->revision = 0x40 || tp->revision == 0x50))) { + if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) { tp->tx_buffers[entry].skb = NULL; tp->tx_buffers[entry].mapping = 0; tp->tx_ring[entry].length = diff --git a/drivers/net/wan/Kconfig b/drivers/net/wan/Kconfig index 66b94668ddd..18c27e1e788 100644 --- a/drivers/net/wan/Kconfig +++ b/drivers/net/wan/Kconfig @@ -435,7 +435,7 @@ config VENDOR_SANGOMA the driver to support. If you have one or more of these cards, say M to this option; - and read <file:Documentation/networking/wanpipe.txt>. + and read <file:Documentation/networking/wan-router.txt>. To compile this driver as a module, choose M here: the module will be called wanpipe. diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c index 921a573372e..7ff814fd65d 100644 --- a/drivers/net/wan/cosa.c +++ b/drivers/net/wan/cosa.c @@ -235,7 +235,7 @@ static int dma[MAX_CARDS+1]; static int irq[MAX_CARDS+1] = { -1, -1, -1, -1, -1, -1, 0, }; /* for class stuff*/ -static struct class_simple *cosa_class; +static struct class *cosa_class; #ifdef MODULE module_param_array(io, int, NULL, 0); @@ -394,19 +394,19 @@ static int __init cosa_init(void) goto out; } devfs_mk_dir("cosa"); - cosa_class = class_simple_create(THIS_MODULE, "cosa"); + cosa_class = class_create(THIS_MODULE, "cosa"); if (IS_ERR(cosa_class)) { err = PTR_ERR(cosa_class); goto out_chrdev; } for (i=0; i<nr_cards; i++) { - class_simple_device_add(cosa_class, MKDEV(cosa_major, i), + class_device_create(cosa_class, MKDEV(cosa_major, i), NULL, "cosa%d", i); err = devfs_mk_cdev(MKDEV(cosa_major, i), S_IFCHR|S_IRUSR|S_IWUSR, "cosa/%d", i); if (err) { - class_simple_device_remove(MKDEV(cosa_major, i)); + class_device_destroy(cosa_class, MKDEV(cosa_major, i)); goto out_chrdev; } } @@ -427,10 +427,10 @@ static void __exit cosa_exit(void) printk(KERN_INFO "Unloading the cosa module\n"); for (i=0; i<nr_cards; i++) { - class_simple_device_remove(MKDEV(cosa_major, i)); + class_device_destroy(cosa_class, MKDEV(cosa_major, i)); devfs_remove("cosa/%d", i); } - class_simple_destroy(cosa_class); + class_destroy(cosa_class); devfs_remove("cosa"); for (cosa=cosa_cards; nr_cards--; cosa++) { /* Clean up the per-channel data */ diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 7f450b51a6c..a5d6891c9d4 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -2,7 +2,7 @@ * Generic HDLC support routines for Linux * Frame Relay support * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -27,6 +27,10 @@ active = open and "link reliable" exist = new = not used + CCITT LMI: ITU-T Q.933 Annex A + ANSI LMI: ANSI T1.617 Annex D + CISCO LMI: the original, aka "Gang of Four" LMI + */ #include <linux/module.h> @@ -49,45 +53,41 @@ #undef DEBUG_ECN #undef DEBUG_LINK -#define MAXLEN_LMISTAT 20 /* max size of status enquiry frame */ - -#define PVC_STATE_NEW 0x01 -#define PVC_STATE_ACTIVE 0x02 -#define PVC_STATE_FECN 0x08 /* FECN condition */ -#define PVC_STATE_BECN 0x10 /* BECN condition */ - - -#define FR_UI 0x03 -#define FR_PAD 0x00 - -#define NLPID_IP 0xCC -#define NLPID_IPV6 0x8E -#define NLPID_SNAP 0x80 -#define NLPID_PAD 0x00 -#define NLPID_Q933 0x08 - - -#define LMI_DLCI 0 /* LMI DLCI */ -#define LMI_PROTO 0x08 -#define LMI_CALLREF 0x00 /* Call Reference */ -#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI lockshift */ -#define LMI_REPTYPE 1 /* report type */ -#define LMI_CCITT_REPTYPE 0x51 -#define LMI_ALIVE 3 /* keep alive */ -#define LMI_CCITT_ALIVE 0x53 -#define LMI_PVCSTAT 7 /* pvc status */ -#define LMI_CCITT_PVCSTAT 0x57 -#define LMI_FULLREP 0 /* full report */ -#define LMI_INTEGRITY 1 /* link integrity report */ -#define LMI_SINGLE 2 /* single pvc report */ +#define FR_UI 0x03 +#define FR_PAD 0x00 + +#define NLPID_IP 0xCC +#define NLPID_IPV6 0x8E +#define NLPID_SNAP 0x80 +#define NLPID_PAD 0x00 +#define NLPID_CCITT_ANSI_LMI 0x08 +#define NLPID_CISCO_LMI 0x09 + + +#define LMI_CCITT_ANSI_DLCI 0 /* LMI DLCI */ +#define LMI_CISCO_DLCI 1023 + +#define LMI_CALLREF 0x00 /* Call Reference */ +#define LMI_ANSI_LOCKSHIFT 0x95 /* ANSI locking shift */ +#define LMI_ANSI_CISCO_REPTYPE 0x01 /* report type */ +#define LMI_CCITT_REPTYPE 0x51 +#define LMI_ANSI_CISCO_ALIVE 0x03 /* keep alive */ +#define LMI_CCITT_ALIVE 0x53 +#define LMI_ANSI_CISCO_PVCSTAT 0x07 /* PVC status */ +#define LMI_CCITT_PVCSTAT 0x57 + +#define LMI_FULLREP 0x00 /* full report */ +#define LMI_INTEGRITY 0x01 /* link integrity report */ +#define LMI_SINGLE 0x02 /* single PVC report */ + #define LMI_STATUS_ENQUIRY 0x75 #define LMI_STATUS 0x7D /* reply */ #define LMI_REPT_LEN 1 /* report type element length */ #define LMI_INTEG_LEN 2 /* link integrity element length */ -#define LMI_LENGTH 13 /* standard LMI frame length */ -#define LMI_ANSI_LENGTH 14 +#define LMI_CCITT_CISCO_LENGTH 13 /* LMI frame lengths */ +#define LMI_ANSI_LENGTH 14 typedef struct { @@ -223,51 +223,34 @@ static inline struct net_device** get_dev_p(pvc_device *pvc, int type) } -static inline u16 status_to_dlci(u8 *status, int *active, int *new) -{ - *new = (status[2] & 0x08) ? 1 : 0; - *active = (status[2] & 0x02) ? 1 : 0; - - return ((status[0] & 0x3F) << 4) | ((status[1] & 0x78) >> 3); -} - - -static inline void dlci_to_status(u16 dlci, u8 *status, int active, int new) -{ - status[0] = (dlci >> 4) & 0x3F; - status[1] = ((dlci << 3) & 0x78) | 0x80; - status[2] = 0x80; - - if (new) - status[2] |= 0x08; - else if (active) - status[2] |= 0x02; -} - - - static int fr_hard_header(struct sk_buff **skb_p, u16 dlci) { u16 head_len; struct sk_buff *skb = *skb_p; switch (skb->protocol) { - case __constant_ntohs(ETH_P_IP): + case __constant_ntohs(NLPID_CCITT_ANSI_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IP; + skb->data[3] = NLPID_CCITT_ANSI_LMI; break; - case __constant_ntohs(ETH_P_IPV6): + case __constant_ntohs(NLPID_CISCO_LMI): head_len = 4; skb_push(skb, head_len); - skb->data[3] = NLPID_IPV6; + skb->data[3] = NLPID_CISCO_LMI; break; - case __constant_ntohs(LMI_PROTO): + case __constant_ntohs(ETH_P_IP): + head_len = 4; + skb_push(skb, head_len); + skb->data[3] = NLPID_IP; + break; + + case __constant_ntohs(ETH_P_IPV6): head_len = 4; skb_push(skb, head_len); - skb->data[3] = LMI_PROTO; + skb->data[3] = NLPID_IPV6; break; case __constant_ntohs(ETH_P_802_3): @@ -461,13 +444,14 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) hdlc_device *hdlc = dev_to_hdlc(dev); struct sk_buff *skb; pvc_device *pvc = hdlc->state.fr.first_pvc; - int len = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? LMI_ANSI_LENGTH - : LMI_LENGTH; - int stat_len = 3; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int len = lmi == LMI_ANSI ? LMI_ANSI_LENGTH : LMI_CCITT_CISCO_LENGTH; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3; u8 *data; int i = 0; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { len += hdlc->state.fr.dce_pvc_count * (2 + stat_len); if (len > HDLC_MAX_MRU) { printk(KERN_WARNING "%s: Too many PVCs while sending " @@ -484,29 +468,31 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) } memset(skb->data, 0, len); skb_reserve(skb, 4); - skb->protocol = __constant_htons(LMI_PROTO); - fr_hard_header(&skb, LMI_DLCI); + if (lmi == LMI_CISCO) { + skb->protocol = __constant_htons(NLPID_CISCO_LMI); + fr_hard_header(&skb, LMI_CISCO_DLCI); + } else { + skb->protocol = __constant_htons(NLPID_CCITT_ANSI_LMI); + fr_hard_header(&skb, LMI_CCITT_ANSI_DLCI); + } data = skb->tail; data[i++] = LMI_CALLREF; - data[i++] = hdlc->state.fr.settings.dce - ? LMI_STATUS : LMI_STATUS_ENQUIRY; - if (hdlc->state.fr.settings.lmi == LMI_ANSI) + data[i++] = dce ? LMI_STATUS : LMI_STATUS_ENQUIRY; + if (lmi == LMI_ANSI) data[i++] = LMI_ANSI_LOCKSHIFT; - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE; data[i++] = LMI_REPT_LEN; data[i++] = fullrep ? LMI_FULLREP : LMI_INTEGRITY; - - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_ALIVE : LMI_ANSI_CISCO_ALIVE; data[i++] = LMI_INTEG_LEN; data[i++] = hdlc->state.fr.txseq =fr_lmi_nextseq(hdlc->state.fr.txseq); data[i++] = hdlc->state.fr.rxseq; - if (hdlc->state.fr.settings.dce && fullrep) { + if (dce && fullrep) { while (pvc) { - data[i++] = (hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT; + data[i++] = lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT; data[i++] = stat_len; /* LMI start/restart */ @@ -523,8 +509,20 @@ static void fr_lmi_send(struct net_device *dev, int fullrep) fr_log_dlci_active(pvc); } - dlci_to_status(pvc->dlci, data + i, - pvc->state.active, pvc->state.new); + if (lmi == LMI_CISCO) { + data[i] = pvc->dlci >> 8; + data[i + 1] = pvc->dlci & 0xFF; + } else { + data[i] = (pvc->dlci >> 4) & 0x3F; + data[i + 1] = ((pvc->dlci << 3) & 0x78) | 0x80; + data[i + 2] = 0x80; + } + + if (pvc->state.new) + data[i + 2] |= 0x08; + else if (pvc->state.active) + data[i + 2] |= 0x02; + i += stat_len; pvc = pvc->next; } @@ -569,6 +567,8 @@ static void fr_set_link_state(int reliable, struct net_device *dev) pvc_carrier(0, pvc); pvc->state.exist = pvc->state.active = 0; pvc->state.new = 0; + if (!hdlc->state.fr.settings.dce) + pvc->state.bandwidth = 0; pvc = pvc->next; } } @@ -583,11 +583,12 @@ static void fr_timer(unsigned long arg) int i, cnt = 0, reliable; u32 list; - if (hdlc->state.fr.settings.dce) + if (hdlc->state.fr.settings.dce) { reliable = hdlc->state.fr.request && time_before(jiffies, hdlc->state.fr.last_poll + hdlc->state.fr.settings.t392 * HZ); - else { + hdlc->state.fr.request = 0; + } else { hdlc->state.fr.last_errors <<= 1; /* Shift the list */ if (hdlc->state.fr.request) { if (hdlc->state.fr.reliable) @@ -634,65 +635,88 @@ static void fr_timer(unsigned long arg) static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) { hdlc_device *hdlc = dev_to_hdlc(dev); - int stat_len; pvc_device *pvc; - int reptype = -1, error, no_ram; u8 rxseq, txseq; - int i; + int lmi = hdlc->state.fr.settings.lmi; + int dce = hdlc->state.fr.settings.dce; + int stat_len = (lmi == LMI_CISCO) ? 6 : 3, reptype, error, no_ram, i; - if (skb->len < ((hdlc->state.fr.settings.lmi == LMI_ANSI) - ? LMI_ANSI_LENGTH : LMI_LENGTH)) { + if (skb->len < (lmi == LMI_ANSI ? LMI_ANSI_LENGTH : + LMI_CCITT_CISCO_LENGTH)) { printk(KERN_INFO "%s: Short LMI frame\n", dev->name); return 1; } - if (skb->data[5] != (!hdlc->state.fr.settings.dce ? - LMI_STATUS : LMI_STATUS_ENQUIRY)) { - printk(KERN_INFO "%s: LMI msgtype=%x, Not LMI status %s\n", - dev->name, skb->data[2], - hdlc->state.fr.settings.dce ? "enquiry" : "reply"); + if (skb->data[3] != (lmi == LMI_CISCO ? NLPID_CISCO_LMI : + NLPID_CCITT_ANSI_LMI)) { + printk(KERN_INFO "%s: Received non-LMI frame with LMI" + " DLCI\n", dev->name); + return 1; + } + + if (skb->data[4] != LMI_CALLREF) { + printk(KERN_INFO "%s: Invalid LMI Call reference (0x%02X)\n", + dev->name, skb->data[4]); + return 1; + } + + if (skb->data[5] != (dce ? LMI_STATUS_ENQUIRY : LMI_STATUS)) { + printk(KERN_INFO "%s: Invalid LMI Message type (0x%02X)\n", + dev->name, skb->data[5]); return 1; } - i = (hdlc->state.fr.settings.lmi == LMI_ANSI) ? 7 : 6; + if (lmi == LMI_ANSI) { + if (skb->data[6] != LMI_ANSI_LOCKSHIFT) { + printk(KERN_INFO "%s: Not ANSI locking shift in LMI" + " message (0x%02X)\n", dev->name, skb->data[6]); + return 1; + } + i = 7; + } else + i = 6; - if (skb->data[i] != - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_REPTYPE : LMI_REPTYPE)) { - printk(KERN_INFO "%s: Not a report type=%x\n", + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_REPTYPE : + LMI_ANSI_CISCO_REPTYPE)) { + printk(KERN_INFO "%s: Not an LMI Report type IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_REPT_LEN) { + printk(KERN_INFO "%s: Invalid LMI Report type IE length" + " (%u)\n", dev->name, skb->data[i]); + return 1; + } - reptype = skb->data[i++]; + reptype = skb->data[++i]; + if (reptype != LMI_INTEGRITY && reptype != LMI_FULLREP) { + printk(KERN_INFO "%s: Unsupported LMI Report type (0x%02X)\n", + dev->name, reptype); + return 1; + } - if (skb->data[i]!= - ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_ALIVE : LMI_ALIVE)) { - printk(KERN_INFO "%s: Unsupported status element=%x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != (lmi == LMI_CCITT ? LMI_CCITT_ALIVE : + LMI_ANSI_CISCO_ALIVE)) { + printk(KERN_INFO "%s: Not an LMI Link integrity verification" + " IE (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - i++; /* Skip length field */ + if (skb->data[++i] != LMI_INTEG_LEN) { + printk(KERN_INFO "%s: Invalid LMI Link integrity verification" + " IE length (%u)\n", dev->name, skb->data[i]); + return 1; + } + i++; hdlc->state.fr.rxseq = skb->data[i++]; /* TX sequence from peer */ rxseq = skb->data[i++]; /* Should confirm our sequence */ txseq = hdlc->state.fr.txseq; - if (hdlc->state.fr.settings.dce) { - if (reptype != LMI_FULLREP && reptype != LMI_INTEGRITY) { - printk(KERN_INFO "%s: Unsupported report type=%x\n", - dev->name, reptype); - return 1; - } + if (dce) hdlc->state.fr.last_poll = jiffies; - } error = 0; if (!hdlc->state.fr.reliable) @@ -703,7 +727,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) error = 1; } - if (hdlc->state.fr.settings.dce) { + if (dce) { if (hdlc->state.fr.fullrep_sent && !error) { /* Stop sending full report - the last one has been confirmed by DTE */ hdlc->state.fr.fullrep_sent = 0; @@ -725,6 +749,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) hdlc->state.fr.dce_changed = 0; } + hdlc->state.fr.request = 1; /* got request */ fr_lmi_send(dev, reptype == LMI_FULLREP ? 1 : 0); return 0; } @@ -739,7 +764,6 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) if (reptype != LMI_FULLREP) return 0; - stat_len = 3; pvc = hdlc->state.fr.first_pvc; while (pvc) { @@ -750,24 +774,35 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) no_ram = 0; while (skb->len >= i + 2 + stat_len) { u16 dlci; + u32 bw; unsigned int active, new; - if (skb->data[i] != ((hdlc->state.fr.settings.lmi == LMI_CCITT) - ? LMI_CCITT_PVCSTAT : LMI_PVCSTAT)) { - printk(KERN_WARNING "%s: Invalid PVCSTAT ID: %x\n", - dev->name, skb->data[i]); + if (skb->data[i] != (lmi == LMI_CCITT ? LMI_CCITT_PVCSTAT : + LMI_ANSI_CISCO_PVCSTAT)) { + printk(KERN_INFO "%s: Not an LMI PVC status IE" + " (0x%02X)\n", dev->name, skb->data[i]); return 1; } - i++; - if (skb->data[i] != stat_len) { - printk(KERN_WARNING "%s: Invalid PVCSTAT length: %x\n", - dev->name, skb->data[i]); + if (skb->data[++i] != stat_len) { + printk(KERN_INFO "%s: Invalid LMI PVC status IE length" + " (%u)\n", dev->name, skb->data[i]); return 1; } i++; - dlci = status_to_dlci(skb->data + i, &active, &new); + new = !! (skb->data[i + 2] & 0x08); + active = !! (skb->data[i + 2] & 0x02); + if (lmi == LMI_CISCO) { + dlci = (skb->data[i] << 8) | skb->data[i + 1]; + bw = (skb->data[i + 3] << 16) | + (skb->data[i + 4] << 8) | + (skb->data[i + 5]); + } else { + dlci = ((skb->data[i] & 0x3F) << 4) | + ((skb->data[i + 1] & 0x78) >> 3); + bw = 0; + } pvc = add_pvc(dev, dlci); @@ -783,9 +818,11 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc->state.deleted = 0; if (active != pvc->state.active || new != pvc->state.new || + bw != pvc->state.bandwidth || !pvc->state.exist) { pvc->state.new = new; pvc->state.active = active; + pvc->state.bandwidth = bw; pvc_carrier(active, pvc); fr_log_dlci_active(pvc); } @@ -801,6 +838,7 @@ static int fr_lmi_recv(struct net_device *dev, struct sk_buff *skb) pvc_carrier(0, pvc); pvc->state.active = pvc->state.new = 0; pvc->state.exist = 0; + pvc->state.bandwidth = 0; fr_log_dlci_active(pvc); } pvc = pvc->next; @@ -829,22 +867,15 @@ static int fr_rx(struct sk_buff *skb) dlci = q922_to_dlci(skb->data); - if (dlci == LMI_DLCI) { - if (hdlc->state.fr.settings.lmi == LMI_NONE) - goto rx_error; /* LMI packet with no LMI? */ - - if (data[3] == LMI_PROTO) { - if (fr_lmi_recv(ndev, skb)) - goto rx_error; - else { - dev_kfree_skb_any(skb); - return NET_RX_SUCCESS; - } - } - - printk(KERN_INFO "%s: Received non-LMI frame with LMI DLCI\n", - ndev->name); - goto rx_error; + if ((dlci == LMI_CCITT_ANSI_DLCI && + (hdlc->state.fr.settings.lmi == LMI_ANSI || + hdlc->state.fr.settings.lmi == LMI_CCITT)) || + (dlci == LMI_CISCO_DLCI && + hdlc->state.fr.settings.lmi == LMI_CISCO)) { + if (fr_lmi_recv(ndev, skb)) + goto rx_error; + dev_kfree_skb_any(skb); + return NET_RX_SUCCESS; } pvc = find_pvc(hdlc, dlci); @@ -1170,7 +1201,8 @@ int hdlc_fr_ioctl(struct net_device *dev, struct ifreq *ifr) if ((new_settings.lmi != LMI_NONE && new_settings.lmi != LMI_ANSI && - new_settings.lmi != LMI_CCITT) || + new_settings.lmi != LMI_CCITT && + new_settings.lmi != LMI_CISCO) || new_settings.t391 < 1 || new_settings.t392 < 2 || new_settings.n391 < 1 || diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c index 6ed064cb446..a63f6a2cc4f 100644 --- a/drivers/net/wan/hdlc_generic.c +++ b/drivers/net/wan/hdlc_generic.c @@ -1,7 +1,7 @@ /* * Generic HDLC support routines for Linux * - * Copyright (C) 1999 - 2003 Krzysztof Halasa <khc@pm.waw.pl> + * Copyright (C) 1999 - 2005 Krzysztof Halasa <khc@pm.waw.pl> * * This program is free software; you can redistribute it and/or modify it * under the terms of version 2 of the GNU General Public License @@ -38,7 +38,7 @@ #include <linux/hdlc.h> -static const char* version = "HDLC support module revision 1.17"; +static const char* version = "HDLC support module revision 1.18"; #undef DEBUG_LINK @@ -126,10 +126,13 @@ void hdlc_set_carrier(int on, struct net_device *dev) if (!hdlc->open) goto carrier_exit; - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); - else + } else { + printk(KERN_INFO "%s: Carrier lost\n", dev->name); __hdlc_set_carrier_off(dev); + } carrier_exit: spin_unlock_irqrestore(&hdlc->state_lock, flags); @@ -157,8 +160,11 @@ int hdlc_open(struct net_device *dev) spin_lock_irq(&hdlc->state_lock); - if (hdlc->carrier) + if (hdlc->carrier) { + printk(KERN_INFO "%s: Carrier detected\n", dev->name); __hdlc_set_carrier_on(dev); + } else + printk(KERN_INFO "%s: No carrier\n", dev->name); hdlc->open = 1; diff --git a/drivers/net/wan/lmc/lmc_main.c b/drivers/net/wan/lmc/lmc_main.c index 15e545f66cd..2b948ea397d 100644 --- a/drivers/net/wan/lmc/lmc_main.c +++ b/drivers/net/wan/lmc/lmc_main.c @@ -723,7 +723,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Why reset??? The link can go down ok */ /* Inform the world that link has been lost */ - dev->flags &= ~IFF_RUNNING; + netif_carrier_off(dev); } /* @@ -736,7 +736,7 @@ static void lmc_watchdog (unsigned long data) /*fold00*/ /* lmc_reset (sc); Again why reset??? */ /* Inform the world that link protocol is back up. */ - dev->flags |= IFF_RUNNING; + netif_carrier_on(dev); /* Now we have to tell the syncppp that we had an outage * and that it should deal. Calling sppp_reopen here @@ -1168,8 +1168,6 @@ static void lmc_running_reset (struct net_device *dev) /*fold00*/ sc->lmc_media->set_link_status (sc, 1); sc->lmc_media->set_status (sc, NULL); - //dev->flags |= IFF_RUNNING; - netif_wake_queue(dev); sc->lmc_txfull = 0; @@ -1233,8 +1231,6 @@ static int lmc_ifdown (struct net_device *dev) /*fold00*/ csr6 &= ~LMC_DEC_SR; /* Turn off the Receive bit */ LMC_CSR_WRITE (sc, csr_command, csr6); - dev->flags &= ~IFF_RUNNING; - sc->stats.rx_missed_errors += LMC_CSR_READ (sc, csr_missed_frames) & 0xffff; diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 1c540d82555..bdf672c4818 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -829,7 +829,7 @@ static void __exit exit_x25_asy(void) } kfree(x25_asy_devs); - tty_register_ldisc(N_X25, NULL); + tty_unregister_ldisc(N_X25); } module_init(init_x25_asy); diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig index 0aaa12c0c09..1d3231cc471 100644 --- a/drivers/net/wireless/Kconfig +++ b/drivers/net/wireless/Kconfig @@ -323,7 +323,7 @@ config PRISM54 For a complete list of supported cards visit <http://prism54.org>. Here is the latest confirmed list of supported cards: - 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 + 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 (version 1) Allnet ALL0271 PCI Card Compex WL54G Cardbus Card Corega CG-WLCB54GT Cardbus Card diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 463c789cdc7..d72e0385e4f 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -754,7 +754,7 @@ typedef struct { u8 zero; u8 ssidLen; u8 ssid[32]; - u16 rssi; + u16 dBm; #define CAP_ESS (1<<0) #define CAP_IBSS (1<<1) #define CAP_PRIVACY (1<<4) @@ -1125,6 +1125,9 @@ static int micsetup(struct airo_info *ai); static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len); static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen); +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi); +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm); + #include <linux/crypto.h> #endif @@ -1713,6 +1716,7 @@ static int readBSSListRid(struct airo_info *ai, int first, list->fh.dwell = le16_to_cpu(list->fh.dwell); list->dsChannel = le16_to_cpu(list->dsChannel); list->atimWindow = le16_to_cpu(list->atimWindow); + list->dBm = le16_to_cpu(list->dBm); return rc; } @@ -2914,7 +2918,7 @@ static int airo_thread(void *data) { flush_signals(current); /* make swsusp happy with our thread */ - try_to_freeze(PF_FREEZE); + try_to_freeze(); if (test_bit(JOB_DIE, &ai->flags)) break; @@ -3245,7 +3249,10 @@ badrx: wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = apriv->wstats.qual.noise; + wstats.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_QUAL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(dev, sa, &wstats); } @@ -3588,7 +3595,10 @@ void mpi_receive_802_11 (struct airo_info *ai) wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm; else wstats.level = (hdr.rssi[1] + 321) / 2; - wstats.updated = 3; + wstats.noise = ai->wstats.qual.noise; + wstats.updated = IW_QUAL_QUAL_UPDATED + | IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; /* Update spy records */ wireless_spy_update(ai->dev, sa, &wstats); } @@ -3679,7 +3689,7 @@ static u16 setup_card(struct airo_info *ai, u8 *mac, int lock) status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock); if ( status == SUCCESS ) { if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL) - memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); + memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512); /* Skip RID length member */ } else { if (ai->rssi) { @@ -5348,7 +5358,7 @@ static int proc_BSSList_open( struct inode *inode, struct file *file ) { (int)BSSList_rid.bssid[5], (int)BSSList_rid.ssidLen, BSSList_rid.ssid, - (int)BSSList_rid.rssi); + (int)BSSList_rid.dBm); ptr += sprintf(ptr, " channel = %d %s %s %s %s\n", (int)BSSList_rid.dsChannel, BSSList_rid.cap & CAP_ESS ? "ESS" : "", @@ -5593,6 +5603,29 @@ static void __exit airo_cleanup_module( void ) * would not work at all... - Jean II */ +static u8 airo_rssi_to_dbm (tdsRssiEntry *rssi_rid, u8 rssi) +{ + if( !rssi_rid ) + return 0; + + return (0x100 - rssi_rid[rssi].rssidBm); +} + +static u8 airo_dbm_to_pct (tdsRssiEntry *rssi_rid, u8 dbm) +{ + int i; + + if( !rssi_rid ) + return 0; + + for( i = 0; i < 256; i++ ) + if (rssi_rid[i].rssidBm == dbm) + return rssi_rid[i].rssipct; + + return 0; +} + + static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid) { int quality = 0; @@ -6443,11 +6476,29 @@ static int airo_get_range(struct net_device *dev, } range->num_frequency = k; + range->sensitivity = 65535; + /* Hum... Should put the right values there */ - range->max_qual.qual = airo_get_max_quality(&cap_rid); - range->max_qual.level = 0x100 - 120; /* -120 dBm */ + if (local->rssi) + range->max_qual.qual = 100; /* % */ + else + range->max_qual.qual = airo_get_max_quality(&cap_rid); + range->max_qual.level = 0; /* 0 means we use dBm */ range->max_qual.noise = 0; - range->sensitivity = 65535; + range->max_qual.updated = 0; + + /* Experimental measurements - boundary 11/5.5 Mb/s */ + /* Note : with or without the (local->rssi), results + * are somewhat different. - Jean II */ + if (local->rssi) { + range->avg_qual.qual = 50; /* % */ + range->avg_qual.level = 186; /* -70 dBm */ + } else { + range->avg_qual.qual = airo_get_avg_quality(&cap_rid); + range->avg_qual.level = 176; /* -80 dBm */ + } + range->avg_qual.noise = 0; + range->avg_qual.updated = 0; for(i = 0 ; i < 8 ; i++) { range->bitrate[i] = cap_rid.supportedRates[i] * 500000; @@ -6508,15 +6559,6 @@ static int airo_get_range(struct net_device *dev, range->max_retry = 65535; range->min_r_time = 1024; range->max_r_time = 65535 * 1024; - /* Experimental measurements - boundary 11/5.5 Mb/s */ - /* Note : with or without the (local->rssi), results - * are somewhat different. - Jean II */ - range->avg_qual.qual = airo_get_avg_quality(&cap_rid); - if (local->rssi) - range->avg_qual.level = 186; /* -70 dBm */ - else - range->avg_qual.level = 176; /* -80 dBm */ - range->avg_qual.noise = 0; /* Event capability (kernel + driver) */ range->event_capa[0] = (IW_EVENT_CAPA_K_0 | @@ -6676,12 +6718,18 @@ static int airo_get_aplist(struct net_device *dev, loseSync = 0; memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN); address[i].sa_family = ARPHRD_ETHER; - if (local->rssi) - qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm; - else - qual[i].level = (BSSList.rssi + 321) / 2; - qual[i].qual = qual[i].noise = 0; - qual[i].updated = 2; + if (local->rssi) { + qual[i].level = 0x100 - BSSList.dBm; + qual[i].qual = airo_dbm_to_pct( local->rssi, BSSList.dBm ); + qual[i].updated = IW_QUAL_QUAL_UPDATED; + } else { + qual[i].level = (BSSList.dBm + 321) / 2; + qual[i].qual = 0; + qual[i].updated = IW_QUAL_QUAL_INVALID; + } + qual[i].noise = local->wstats.qual.noise; + qual[i].updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; if (BSSList.index == 0xffff) break; } @@ -6760,7 +6808,7 @@ static int airo_set_scan(struct net_device *dev, static inline char *airo_translate_scan(struct net_device *dev, char *current_ev, char *end_buf, - BSSListRid *list) + BSSListRid *bss) { struct airo_info *ai = dev->priv; struct iw_event iwe; /* Temporary buffer */ @@ -6771,22 +6819,22 @@ static inline char *airo_translate_scan(struct net_device *dev, /* First entry *MUST* be the AP MAC address */ iwe.cmd = SIOCGIWAP; iwe.u.ap_addr.sa_family = ARPHRD_ETHER; - memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN); + memcpy(iwe.u.ap_addr.sa_data, bss->bssid, ETH_ALEN); current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN); /* Other entries will be displayed in the order we give them */ /* Add the ESSID */ - iwe.u.data.length = list->ssidLen; + iwe.u.data.length = bss->ssidLen; if(iwe.u.data.length > 32) iwe.u.data.length = 32; iwe.cmd = SIOCGIWESSID; iwe.u.data.flags = 1; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Add mode */ iwe.cmd = SIOCGIWMODE; - capabilities = le16_to_cpu(list->cap); + capabilities = le16_to_cpu(bss->cap); if(capabilities & (CAP_ESS | CAP_IBSS)) { if(capabilities & CAP_ESS) iwe.u.mode = IW_MODE_MASTER; @@ -6797,19 +6845,25 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Add frequency */ iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = le16_to_cpu(list->dsChannel); + iwe.u.freq.m = le16_to_cpu(bss->dsChannel); iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000; iwe.u.freq.e = 1; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); /* Add quality statistics */ iwe.cmd = IWEVQUAL; - if (ai->rssi) - iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm; - else - iwe.u.qual.level = (list->rssi + 321) / 2; - iwe.u.qual.noise = 0; - iwe.u.qual.qual = 0; + if (ai->rssi) { + iwe.u.qual.level = 0x100 - bss->dBm; + iwe.u.qual.qual = airo_dbm_to_pct( ai->rssi, bss->dBm ); + iwe.u.qual.updated = IW_QUAL_QUAL_UPDATED; + } else { + iwe.u.qual.level = (bss->dBm + 321) / 2; + iwe.u.qual.qual = 0; + iwe.u.qual.updated = IW_QUAL_QUAL_INVALID; + } + iwe.u.qual.noise = ai->wstats.qual.noise; + iwe.u.qual.updated = IW_QUAL_LEVEL_UPDATED + | IW_QUAL_NOISE_UPDATED; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN); /* Add encryption capability */ @@ -6819,7 +6873,7 @@ static inline char *airo_translate_scan(struct net_device *dev, else iwe.u.data.flags = IW_ENCODE_DISABLED; iwe.u.data.length = 0; - current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid); + current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, bss->ssid); /* Rate : stuffing multiple values in a single event require a bit * more of magic - Jean II */ @@ -6831,10 +6885,10 @@ static inline char *airo_translate_scan(struct net_device *dev, /* Max 8 values */ for(i = 0 ; i < 8 ; i++) { /* NULL terminated */ - if(list->rates[i] == 0) + if(bss->rates[i] == 0) break; /* Bit rate given in 500 kb/s units (+ 0x80) */ - iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000); + iwe.u.bitrate.value = ((bss->rates[i] & 0x7f) * 500000); /* Add new value to event */ current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN); } @@ -7153,18 +7207,22 @@ static void airo_read_wireless_stats(struct airo_info *local) /* The status */ local->wstats.status = status_rid.mode; - /* Signal quality and co. But where is the noise level ??? */ - local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); - if (local->rssi) - local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm; - else + /* Signal quality and co */ + if (local->rssi) { + local->wstats.qual.level = airo_rssi_to_dbm( local->rssi, status_rid.sigQuality ); + /* normalizedSignalStrength appears to be a percentage */ + local->wstats.qual.qual = status_rid.normalizedSignalStrength; + } else { local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2; + local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid); + } + local->wstats.qual.updated = IW_QUAL_QUAL_UPDATED | IW_QUAL_LEVEL_UPDATED; if (status_rid.len >= 124) { - local->wstats.qual.noise = 256 - status_rid.noisedBm; - local->wstats.qual.updated = 7; + local->wstats.qual.noise = 0x100 - status_rid.noisedBm; + local->wstats.qual.updated |= IW_QUAL_NOISE_UPDATED; } else { local->wstats.qual.noise = 0; - local->wstats.qual.updated = 3; + local->wstats.qual.updated |= IW_QUAL_NOISE_INVALID; } /* Packets discarded in the wireless adapter due to wireless diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c index a91b507e0a7..a4ed28d9c78 100644 --- a/drivers/net/wireless/atmel_cs.c +++ b/drivers/net/wireless/atmel_cs.c @@ -321,6 +321,7 @@ static struct { { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" }, { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" }, { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" }, + { 0, 0, "IEEE 802.11b/Wireless LAN Card S", ATMEL_FW_TYPE_504_2958, "Siemens Gigaset PC Card II" }, { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" }, { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" }, { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" }, diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c index a3a32430ae9..b1078baa1d5 100644 --- a/drivers/net/wireless/orinoco.c +++ b/drivers/net/wireless/orinoco.c @@ -492,6 +492,9 @@ EXPORT_SYMBOL(orinoco_debug); static int suppress_linkstatus; /* = 0 */ module_param(suppress_linkstatus, bool, 0644); MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes"); +static int ignore_disconnect; /* = 0 */ +module_param(ignore_disconnect, int, 0644); +MODULE_PARM_DESC(ignore_disconnect, "Don't report lost link to the network layer"); /********************************************************************/ /* Compile time configuration and compatibility stuff */ @@ -604,7 +607,6 @@ struct hermes_rx_descriptor { static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); static int __orinoco_program_rids(struct net_device *dev); static void __orinoco_set_multicast_list(struct net_device *dev); -static int orinoco_debug_dump_recs(struct net_device *dev); /********************************************************************/ /* Internal helper functions */ @@ -655,7 +657,7 @@ static int orinoco_open(struct net_device *dev) return err; } -int orinoco_stop(struct net_device *dev) +static int orinoco_stop(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); int err = 0; @@ -686,7 +688,7 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) struct orinoco_private *priv = netdev_priv(dev); hermes_t *hw = &priv->hw; struct iw_statistics *wstats = &priv->wstats; - int err = 0; + int err; unsigned long flags; if (! netif_device_present(dev)) { @@ -695,9 +697,21 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) return NULL; /* FIXME: Can we do better than this? */ } + /* If busy, return the old stats. Returning NULL may cause + * the interface to disappear from /proc/net/wireless */ if (orinoco_lock(priv, &flags) != 0) - return NULL; /* FIXME: Erg, we've been signalled, how - * do we propagate this back up? */ + return wstats; + + /* We can't really wait for the tallies inquiry command to + * complete, so we just use the previous results and trigger + * a new tallies inquiry command for next time - Jean II */ + /* FIXME: Really we should wait for the inquiry to come back - + * as it is the stats we give don't make a whole lot of sense. + * Unfortunately, it's not clear how to do that within the + * wireless extensions framework: I think we're in user + * context, but a lock seems to be held by the time we get in + * here so we're not safe to sleep here. */ + hermes_inquire(hw, HERMES_INQ_TALLIES); if (priv->iw_mode == IW_MODE_ADHOC) { memset(&wstats->qual, 0, sizeof(wstats->qual)); @@ -716,25 +730,16 @@ static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev) err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_COMMSQUALITY, &cq); - - wstats->qual.qual = (int)le16_to_cpu(cq.qual); - wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; - wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; - wstats->qual.updated = 7; + + if (!err) { + wstats->qual.qual = (int)le16_to_cpu(cq.qual); + wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95; + wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95; + wstats->qual.updated = 7; + } } - /* We can't really wait for the tallies inquiry command to - * complete, so we just use the previous results and trigger - * a new tallies inquiry command for next time - Jean II */ - /* FIXME: We're in user context (I think?), so we should just - wait for the tallies to come through */ - err = hermes_inquire(hw, HERMES_INQ_TALLIES); - orinoco_unlock(priv, &flags); - - if (err) - return NULL; - return wstats; } @@ -1275,9 +1280,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) len = sizeof(tallies); } - /* Read directly the data (no seek) */ - hermes_read_words(hw, HERMES_DATA1, (void *) &tallies, - len / 2); /* FIXME: blech! */ + err = hermes_bap_pread(hw, IRQ_BAP, &tallies, len, + infofid, sizeof(info)); + if (err) + break; /* Increment our various counters */ /* wstats->discard.nwid - no wrong BSSID stuff */ @@ -1307,8 +1313,10 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) break; } - hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus, - len / 2); + err = hermes_bap_pread(hw, IRQ_BAP, &linkstatus, len, + infofid, sizeof(info)); + if (err) + break; newstatus = le16_to_cpu(linkstatus.linkstatus); connected = (newstatus == HERMES_LINKSTATUS_CONNECTED) @@ -1317,7 +1325,7 @@ static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw) if (connected) netif_carrier_on(dev); - else + else if (!ignore_disconnect) netif_carrier_off(dev); if (newstatus != priv->last_linkstatus) @@ -1350,6 +1358,8 @@ int __orinoco_up(struct net_device *dev) struct hermes *hw = &priv->hw; int err; + netif_carrier_off(dev); /* just to make sure */ + err = __orinoco_program_rids(dev); if (err) { printk(KERN_ERR "%s: Error %d configuring card\n", @@ -1413,7 +1423,7 @@ int orinoco_reinit_firmware(struct net_device *dev) return err; err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { + if (err == -EIO && priv->nicbuf_size > TX_NICBUF_SIZE_BUG) { /* Try workaround for old Symbol firmware bug */ printk(KERN_WARNING "%s: firmware ALLOC bug detected " "(old Symbol firmware?). Trying to work around... ", @@ -1610,17 +1620,15 @@ static int __orinoco_program_rids(struct net_device *dev) return err; } /* Set the channel/frequency */ - if (priv->channel == 0) { - printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name); - if (priv->createibss) - priv->channel = 10; - } - err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL, - priv->channel); - if (err) { - printk(KERN_ERR "%s: Error %d setting channel\n", - dev->name, err); - return err; + if (priv->channel != 0 && priv->iw_mode != IW_MODE_INFRA) { + err = hermes_write_wordrec(hw, USER_BAP, + HERMES_RID_CNFOWNCHANNEL, + priv->channel); + if (err) { + printk(KERN_ERR "%s: Error %d setting channel %d\n", + dev->name, err, priv->channel); + return err; + } } if (priv->has_ibss) { @@ -1916,7 +1924,7 @@ static void orinoco_reset(struct net_device *dev) { struct orinoco_private *priv = netdev_priv(dev); struct hermes *hw = &priv->hw; - int err = 0; + int err; unsigned long flags; if (orinoco_lock(priv, &flags) != 0) @@ -1938,20 +1946,20 @@ static void orinoco_reset(struct net_device *dev) orinoco_unlock(priv, &flags); - if (priv->hard_reset) + if (priv->hard_reset) { err = (*priv->hard_reset)(priv); - if (err) { - printk(KERN_ERR "%s: orinoco_reset: Error %d " - "performing hard reset\n", dev->name, err); - /* FIXME: shutdown of some sort */ - return; + if (err) { + printk(KERN_ERR "%s: orinoco_reset: Error %d " + "performing hard reset\n", dev->name, err); + goto disable; + } } err = orinoco_reinit_firmware(dev); if (err) { printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n", dev->name, err); - return; + goto disable; } spin_lock_irq(&priv->lock); /* This has to be called from user context */ @@ -1972,6 +1980,10 @@ static void orinoco_reset(struct net_device *dev) spin_unlock_irq(&priv->lock); return; + disable: + hermes_set_irqmask(hw, 0); + netif_device_detach(dev); + printk(KERN_ERR "%s: Device has been disabled!\n", dev->name); } /********************************************************************/ @@ -2056,7 +2068,7 @@ irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs) if (events & HERMES_EV_ALLOC) __orinoco_ev_alloc(dev, hw); - hermes_write_regn(hw, EVACK, events); + hermes_write_regn(hw, EVACK, evstat); evstat = hermes_read_regn(hw, EVSTAT); events = evstat & hw->inten; @@ -2215,6 +2227,8 @@ static int determine_firmware(struct net_device *dev) firmver >= 0x31000; priv->has_preamble = (firmver >= 0x20000); priv->ibss_port = 4; + priv->broken_disableport = (firmver == 0x25013) || + (firmver >= 0x30000 && firmver <= 0x31000); /* Tested with Intel firmware : 0x20015 => Jean II */ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */ break; @@ -2267,7 +2281,7 @@ static int orinoco_init(struct net_device *dev) priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN; /* Initialize the firmware */ - err = hermes_init(hw); + err = orinoco_reinit_firmware(dev); if (err != 0) { printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n", dev->name, err); @@ -2400,31 +2414,12 @@ static int orinoco_init(struct net_device *dev) /* By default use IEEE/IBSS ad-hoc mode if we have it */ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss); set_port_type(priv); - priv->channel = 10; /* default channel, more-or-less arbitrary */ + priv->channel = 0; /* use firmware default */ priv->promiscuous = 0; priv->wep_on = 0; priv->tx_key = 0; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err == -EIO) { - /* Try workaround for old Symbol firmware bug */ - printk(KERN_WARNING "%s: firmware ALLOC bug detected " - "(old Symbol firmware?). Trying to work around... ", - dev->name); - - priv->nicbuf_size = TX_NICBUF_SIZE_BUG; - err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid); - if (err) - printk("failed!\n"); - else - printk("ok.\n"); - } - if (err) { - printk("%s: Error %d allocating Tx buffer\n", dev->name, err); - goto out; - } - /* Make the hardware available, as long as it hasn't been * removed elsewhere (e.g. by PCMCIA hot unplug) */ spin_lock_irq(&priv->lock); @@ -2450,7 +2445,7 @@ struct net_device *alloc_orinocodev(int sizeof_card, priv = netdev_priv(dev); priv->ndev = dev; if (sizeof_card) - priv->card = (void *)((unsigned long)netdev_priv(dev) + priv->card = (void *)((unsigned long)priv + sizeof(struct orinoco_private)); else priv->card = NULL; @@ -2555,6 +2550,7 @@ static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active, } len = le16_to_cpu(essidbuf.len); + BUG_ON(len > IW_ESSID_MAX_SIZE); memset(buf, 0, IW_ESSID_MAX_SIZE+1); memcpy(buf, p, len); @@ -2923,13 +2919,14 @@ static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq) memset(&essidbuf, 0, sizeof(essidbuf)); if (erq->flags) { - if (erq->length > IW_ESSID_MAX_SIZE) + /* iwconfig includes the NUL in the specified length */ + if (erq->length > IW_ESSID_MAX_SIZE+1) return -E2BIG; if (copy_from_user(&essidbuf, erq->pointer, erq->length)) return -EFAULT; - essidbuf[erq->length] = '\0'; + essidbuf[IW_ESSID_MAX_SIZE] = '\0'; } if (orinoco_lock(priv, &flags) != 0) @@ -3855,7 +3852,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) { SIOCIWFIRSTPRIV + 0x7, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "get_ibssport" }, - { SIOCIWLASTPRIV, 0, 0, "dump_recs" }, }; wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]); @@ -3943,14 +3939,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) err = orinoco_ioctl_getibssport(dev, wrq); break; - case SIOCIWLASTPRIV: - err = orinoco_debug_dump_recs(dev); - if (err) - printk(KERN_ERR "%s: Unable to dump records (%d)\n", - dev->name, err); - break; - - default: err = -EOPNOTSUPP; } @@ -3964,187 +3952,6 @@ orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) return err; } -struct { - u16 rid; - char *name; - int displaytype; -#define DISPLAY_WORDS 0 -#define DISPLAY_BYTES 1 -#define DISPLAY_STRING 2 -#define DISPLAY_XSTRING 3 -} record_table[] = { -#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type } - DEBUG_REC(CNFPORTTYPE,WORDS), - DEBUG_REC(CNFOWNMACADDR,BYTES), - DEBUG_REC(CNFDESIREDSSID,STRING), - DEBUG_REC(CNFOWNCHANNEL,WORDS), - DEBUG_REC(CNFOWNSSID,STRING), - DEBUG_REC(CNFOWNATIMWINDOW,WORDS), - DEBUG_REC(CNFSYSTEMSCALE,WORDS), - DEBUG_REC(CNFMAXDATALEN,WORDS), - DEBUG_REC(CNFPMENABLED,WORDS), - DEBUG_REC(CNFPMEPS,WORDS), - DEBUG_REC(CNFMULTICASTRECEIVE,WORDS), - DEBUG_REC(CNFMAXSLEEPDURATION,WORDS), - DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS), - DEBUG_REC(CNFOWNNAME,STRING), - DEBUG_REC(CNFOWNDTIMPERIOD,WORDS), - DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS), - DEBUG_REC(CNFWEPENABLED_AGERE,WORDS), - DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS), - DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS), - DEBUG_REC(CNFDEFAULTKEY0,BYTES), - DEBUG_REC(CNFDEFAULTKEY1,BYTES), - DEBUG_REC(CNFMWOROBUST_AGERE,WORDS), - DEBUG_REC(CNFDEFAULTKEY2,BYTES), - DEBUG_REC(CNFDEFAULTKEY3,BYTES), - DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS), - DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS), - DEBUG_REC(CNFAUTHENTICATION,WORDS), - DEBUG_REC(CNFMAXASSOCSTA,WORDS), - DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS), - DEBUG_REC(CNFTXCONTROL,WORDS), - DEBUG_REC(CNFROAMINGMODE,WORDS), - DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS), - DEBUG_REC(CNFRCVCRCERROR,WORDS), - DEBUG_REC(CNFMMLIFE,WORDS), - DEBUG_REC(CNFALTRETRYCOUNT,WORDS), - DEBUG_REC(CNFBEACONINT,WORDS), - DEBUG_REC(CNFAPPCFINFO,WORDS), - DEBUG_REC(CNFSTAPCFINFO,WORDS), - DEBUG_REC(CNFPRIORITYQUSAGE,WORDS), - DEBUG_REC(CNFTIMCTRL,WORDS), - DEBUG_REC(CNFTHIRTY2TALLY,WORDS), - DEBUG_REC(CNFENHSECURITY,WORDS), - DEBUG_REC(CNFGROUPADDRESSES,BYTES), - DEBUG_REC(CNFCREATEIBSS,WORDS), - DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS), - DEBUG_REC(CNFRTSTHRESHOLD,WORDS), - DEBUG_REC(CNFTXRATECONTROL,WORDS), - DEBUG_REC(CNFPROMISCUOUSMODE,WORDS), - DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS), - DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS), - DEBUG_REC(CNFSHORTPREAMBLE,WORDS), - DEBUG_REC(CNFWEPKEYS_AGERE,BYTES), - DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS), - DEBUG_REC(CNFTXKEY_AGERE,WORDS), - DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS), - DEBUG_REC(CNFBASICRATES,WORDS), - DEBUG_REC(CNFSUPPORTEDRATES,WORDS), - DEBUG_REC(CNFTICKTIME,WORDS), - DEBUG_REC(CNFSCANREQUEST,WORDS), - DEBUG_REC(CNFJOINREQUEST,WORDS), - DEBUG_REC(CNFAUTHENTICATESTATION,WORDS), - DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS), - DEBUG_REC(MAXLOADTIME,WORDS), - DEBUG_REC(DOWNLOADBUFFER,WORDS), - DEBUG_REC(PRIID,WORDS), - DEBUG_REC(PRISUPRANGE,WORDS), - DEBUG_REC(CFIACTRANGES,WORDS), - DEBUG_REC(NICSERNUM,XSTRING), - DEBUG_REC(NICID,WORDS), - DEBUG_REC(MFISUPRANGE,WORDS), - DEBUG_REC(CFISUPRANGE,WORDS), - DEBUG_REC(CHANNELLIST,WORDS), - DEBUG_REC(REGULATORYDOMAINS,WORDS), - DEBUG_REC(TEMPTYPE,WORDS), -/* DEBUG_REC(CIS,BYTES), */ - DEBUG_REC(STAID,WORDS), - DEBUG_REC(CURRENTSSID,STRING), - DEBUG_REC(CURRENTBSSID,BYTES), - DEBUG_REC(COMMSQUALITY,WORDS), - DEBUG_REC(CURRENTTXRATE,WORDS), - DEBUG_REC(CURRENTBEACONINTERVAL,WORDS), - DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS), - DEBUG_REC(PROTOCOLRSPTIME,WORDS), - DEBUG_REC(SHORTRETRYLIMIT,WORDS), - DEBUG_REC(LONGRETRYLIMIT,WORDS), - DEBUG_REC(MAXTRANSMITLIFETIME,WORDS), - DEBUG_REC(MAXRECEIVELIFETIME,WORDS), - DEBUG_REC(CFPOLLABLE,WORDS), - DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS), - DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS), - DEBUG_REC(OWNMACADDR,BYTES), - DEBUG_REC(SCANRESULTSTABLE,WORDS), - DEBUG_REC(PHYTYPE,WORDS), - DEBUG_REC(CURRENTCHANNEL,WORDS), - DEBUG_REC(CURRENTPOWERSTATE,WORDS), - DEBUG_REC(CCAMODE,WORDS), - DEBUG_REC(SUPPORTEDDATARATES,WORDS), - DEBUG_REC(BUILDSEQ,BYTES), - DEBUG_REC(FWID,XSTRING) -#undef DEBUG_REC -}; - -#define DEBUG_LTV_SIZE 128 - -static int orinoco_debug_dump_recs(struct net_device *dev) -{ - struct orinoco_private *priv = netdev_priv(dev); - hermes_t *hw = &priv->hw; - u8 *val8; - u16 *val16; - int i,j; - u16 length; - int err; - - /* I'm not sure: we might have a lock here, so we'd better go - atomic, just in case. */ - val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC); - if (! val8) - return -ENOMEM; - val16 = (u16 *)val8; - - for (i = 0; i < ARRAY_SIZE(record_table); i++) { - u16 rid = record_table[i].rid; - int len; - - memset(val8, 0, DEBUG_LTV_SIZE + 2); - - err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE, - &length, val8); - if (err) { - DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid); - continue; - } - val16 = (u16 *)val8; - if (length == 0) - continue; - - printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=", - record_table[i].name, - rid, length, (length-1)*2); - len = min(((int)length-1)*2, DEBUG_LTV_SIZE); - - switch (record_table[i].displaytype) { - case DISPLAY_WORDS: - for (j = 0; j < len / 2; j++) - printk("%04X-", le16_to_cpu(val16[j])); - break; - - case DISPLAY_BYTES: - default: - for (j = 0; j < len; j++) - printk("%02X:", val8[j]); - break; - - case DISPLAY_STRING: - len = min(len, le16_to_cpu(val16[0])+2); - val8[len] = '\0'; - printk("\"%s\"", (char *)&val16[1]); - break; - - case DISPLAY_XSTRING: - printk("'%s'", (char *)val8); - } - - printk("\n"); - } - - kfree(val8); - - return 0; -} /********************************************************************/ /* Debugging */ @@ -4218,7 +4025,6 @@ EXPORT_SYMBOL(free_orinocodev); EXPORT_SYMBOL(__orinoco_up); EXPORT_SYMBOL(__orinoco_down); -EXPORT_SYMBOL(orinoco_stop); EXPORT_SYMBOL(orinoco_reinit_firmware); EXPORT_SYMBOL(orinoco_interrupt); diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h index 13e42c2afb2..f749b50d108 100644 --- a/drivers/net/wireless/orinoco.h +++ b/drivers/net/wireless/orinoco.h @@ -119,7 +119,6 @@ extern struct net_device *alloc_orinocodev(int sizeof_card, extern void free_orinocodev(struct net_device *dev); extern int __orinoco_up(struct net_device *dev); extern int __orinoco_down(struct net_device *dev); -extern int orinoco_stop(struct net_device *dev); extern int orinoco_reinit_firmware(struct net_device *dev); extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs); diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c index ec8cf29ffce..6c42b573a95 100644 --- a/drivers/net/wireless/strip.c +++ b/drivers/net/wireless/strip.c @@ -2828,7 +2828,7 @@ static void __exit strip_exit_driver(void) /* Unregister with the /proc/net file here. */ proc_net_remove("strip"); - if ((i = tty_register_ldisc(N_STRIP, NULL))) + if ((i = tty_unregister_ldisc(N_STRIP))) printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i); printk(signoff); |