Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c changes from Wolfram Sang:

 - an arbitration driver.  While the driver is quite simple, it caused
   discussion if we need additional arbitration on top of the one
   specified in the I2C standard.  Conclusion is that I accept a few
   generic mechanisms, but not very specific ones.

 - the core lost the detach_adapter() call.  It has no users anymore and
   was in the way for other cleanups.  attach_adapter() is sadly still
   there since there are users waiting to be converted.

 - the core gained a bus recovery infrastructure.  I2C defines a way to
   recover if the data line is stalled.  This mechanism is now in the
   core and drivers can now pass some data to make use of it.

 - bigger driver cleanups for designware, s3c2410

 - removing superfluous refcounting from drivers

 - removing Ben Dooks as second maintainer due to inactivity.  Thanks
   for all your work so far, Ben!

 - bugfixes, feature additions, devicetree fixups, simplifications...

* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
  i2c: xiic: must always write 16-bit words to TX_FIFO
  i2c: octeon: use HZ in timeout value
  i2c: octeon: Fix i2c fail problem when a process is terminated by a signal
  i2c: designware-pci: drop superfluous {get|put}_device
  i2c: designware-plat: drop superfluous {get|put}_device
  i2c: davinci: drop superfluous {get|put}_device
  MAINTAINERS: Ben Dooks is inactive regarding I2C
  i2c: mux: Add i2c-arb-gpio-challenge 'mux' driver
  i2c: at91: convert to dma_request_slave_channel_compat()
  i2c: mxs: do error checking and handling in PIO mode
  i2c: mxs: remove races in PIO code
  i2c-designware: switch to use runtime PM autosuspend
  i2c-designware: use usleep_range() in the busy-loop
  i2c-designware: enable/disable the controller properly
  i2c-designware: use dynamic adapter numbering on Lynxpoint
  i2c-designware-pci: use managed functions pcim_* and devm_*
  i2c-designware-pci: use dev_err() instead of printk()
  i2c-designware: move to managed functions (devm_*)
  i2c: remove CONFIG_HOTPLUG ifdefs
  i2c: s3c2410: Add SMBus emulation for block read
  ...

1 files changed, 2 insertions, 4 deletions

diff --git a/drivers/net/ethernet/sfc/falcon.c b/drivers/net/ethernet/sfc/falcon.c
index 4486102fa9b..71998e7995d 100644
--- a/drivers/net/ethernet/sfc/falcon.c
+++ b/drivers/net/ethernet/sfc/falcon.c
@@ -1528,7 +1528,7 @@ static int falcon_probe_nic(struct efx_nic *efx)
 	return 0;
 
  fail6:
-	BUG_ON(i2c_del_adapter(&board->i2c_adap));
+	i2c_del_adapter(&board->i2c_adap);
 	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
  fail5:
 	efx_nic_free_buffer(efx, &efx->irq_status);
@@ -1666,13 +1666,11 @@ static void falcon_remove_nic(struct efx_nic *efx)
 {
 	struct falcon_nic_data *nic_data = efx->nic_data;
 	struct falcon_board *board = falcon_board(efx);
-	int rc;
 
 	board->type->fini(efx);
 
 	/* Remove I2C adapter and clear it in preparation for a retry */
-	rc = i2c_del_adapter(&board->i2c_adap);
-	BUG_ON(rc);
+	i2c_del_adapter(&board->i2c_adap);
 	memset(&board->i2c_adap, 0, sizeof(board->i2c_adap));
 
 	efx_nic_free_buffer(efx, &efx->irq_status);