[PATCH] pcmcia: remove unneeded Vcc pseudo setting

As we do not allow setting Vcc in the pcmcia core, and Vpp1 and
Vpp2 can only be set to the same value, a lot of code can be
streamlined.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>

19 files changed, 31 insertions, 80 deletions

diff --git a/drivers/net/pcmcia/3c574_cs.c b/drivers/net/pcmcia/3c574_cs.c
index 8dfa30b3c70..179c9b7ad04 100644
--- a/drivers/net/pcmcia/3c574_cs.c
+++ b/drivers/net/pcmcia/3c574_cs.c
@@ -280,7 +280,6 @@ static int tc574_attach(struct pcmcia_device *p_dev)
 	link->irq.Handler = &el3_interrupt;
 	link->irq.Instance = dev;
 	link->conf.Attributes = CONF_ENABLE_IRQ;
-	link->conf.Vcc = 50;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex = 1;
 	link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/pcmcia/3c589_cs.c b/drivers/net/pcmcia/3c589_cs.c
index b15066be26f..7e8036f2e19 100644
--- a/drivers/net/pcmcia/3c589_cs.c
+++ b/drivers/net/pcmcia/3c589_cs.c
@@ -194,7 +194,6 @@ static int tc589_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &el3_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c
index c34547c7924..5ca0d571858 100644
--- a/drivers/net/pcmcia/axnet_cs.c
+++ b/drivers/net/pcmcia/axnet_cs.c
@@ -302,7 +302,6 @@ static void axnet_config(dev_link_t *link)
     cisparse_t parse;
     int i, j, last_ret, last_fn;
     u_short buf[64];
-    config_info_t conf;
 
     DEBUG(0, "axnet_config(0x%p)\n", link);
 
@@ -321,10 +320,6 @@ static void axnet_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
-
     tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
     tuple.Attributes = 0;
     CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
diff --git a/drivers/net/pcmcia/com20020_cs.c b/drivers/net/pcmcia/com20020_cs.c
index 0748c3d4954..e14d3d18b97 100644
--- a/drivers/net/pcmcia/com20020_cs.c
+++ b/drivers/net/pcmcia/com20020_cs.c
@@ -178,7 +178,6 @@ static int com20020_attach(struct pcmcia_device *p_dev)
     link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 62efbc7c2dc..34bf963b129 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -257,7 +257,6 @@ static int fmvj18x_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The FMVJ18x specific entries in the device structure. */
@@ -396,12 +395,7 @@ static void fmvj18x_config(dev_link_t *link)
 	switch (le16_to_cpu(buf[0])) {
 	case MANFID_TDK:
 	    cardtype = TDK;
-	    if (le16_to_cpu(buf[1]) == PRODID_TDK_CF010) {
-		cs_status_t status;
-		pcmcia_get_status(handle, &status);
-		if (status.CardState & CS_EVENT_3VCARD)
-		    link->conf.Vcc = 33; /* inserted in 3.3V slot */
-	    } else if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
+	    if (le16_to_cpu(buf[1]) == PRODID_TDK_GN3410
 			|| le16_to_cpu(buf[1]) == PRODID_TDK_NP9610
 			|| le16_to_cpu(buf[1]) == PRODID_TDK_MN3200) {
 		/* MultiFunction Card */
diff --git a/drivers/net/pcmcia/ibmtr_cs.c b/drivers/net/pcmcia/ibmtr_cs.c
index 6d7f8f52e17..904c5cb04e7 100644
--- a/drivers/net/pcmcia/ibmtr_cs.c
+++ b/drivers/net/pcmcia/ibmtr_cs.c
@@ -167,7 +167,6 @@ static int ibmtr_attach(struct pcmcia_device *p_dev)
     link->irq.IRQInfo1 = IRQ_LEVEL_ID;
     link->irq.Handler = &tok_interrupt;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.Present = PRESENT_OPTION;
 
diff --git a/drivers/net/pcmcia/nmclan_cs.c b/drivers/net/pcmcia/nmclan_cs.c
index cf2a50c015d..c25d9451d57 100644
--- a/drivers/net/pcmcia/nmclan_cs.c
+++ b/drivers/net/pcmcia/nmclan_cs.c
@@ -469,7 +469,6 @@ static int nmclan_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &mace_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c
index 3a2b731eeb3..5a7e58af0b3 100644
--- a/drivers/net/pcmcia/pcnet_cs.c
+++ b/drivers/net/pcmcia/pcnet_cs.c
@@ -531,7 +531,6 @@ static void pcnet_config(dev_link_t *link)
     int i, last_ret, last_fn, start_pg, stop_pg, cm_offset;
     int manfid = 0, prodid = 0, has_shmem = 0;
     u_short buf[64];
-    config_info_t conf;
     hw_info_t *hw_info;
 
     DEBUG(0, "pcnet_config(0x%p)\n", link);
@@ -550,10 +549,6 @@ static void pcnet_config(dev_link_t *link)
     /* Configure card */
     link->state |= DEV_CONFIG;
 
-    /* Look up current Vcc */
-    CS_CHECK(GetConfigurationInfo, pcmcia_get_configuration_info(handle, &conf));
-    link->conf.Vcc = conf.Vcc;
-
     tuple.DesiredTuple = CISTPL_MANFID;
     tuple.Attributes = TUPLE_RETURN_COMMON;
     if ((pcmcia_get_first_tuple(handle, &tuple) == CS_SUCCESS) &&
diff --git a/drivers/net/pcmcia/smc91c92_cs.c b/drivers/net/pcmcia/smc91c92_cs.c
index 86942c09d8d..b46b7e14839 100644
--- a/drivers/net/pcmcia/smc91c92_cs.c
+++ b/drivers/net/pcmcia/smc91c92_cs.c
@@ -334,7 +334,6 @@ static int smc91c92_attach(struct pcmcia_device *p_dev)
     link->irq.Handler = &smc_interrupt;
     link->irq.Instance = dev;
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
 
     /* The SMC91c92-specific entries in the device structure. */
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
index 19347bcb2f1..f5fa86d046d 100644
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ b/drivers/net/pcmcia/xirc2ps_cs.c
@@ -571,7 +571,6 @@ xirc2ps_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
index adb90b679d7..2216c04a02a 100644
--- a/drivers/net/wireless/airo_cs.c
+++ b/drivers/net/wireless/airo_cs.c
@@ -168,7 +168,6 @@ static int airo_attach(struct pcmcia_device *p_dev)
 	  device, and can be hard-wired here.
 	*/
 	link->conf.Attributes = 0;
-	link->conf.Vcc = 50;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 	
 	/* Allocate space for private device-specific data */
@@ -294,16 +293,11 @@ static void airo_config(dev_link_t *link)
 		
 		/* Use power settings for Vcc and Vpp if present */
 		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-		
 		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
 		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
 		
 		/* Do we need to allocate an interrupt? */
@@ -391,11 +385,10 @@ static void airo_config(dev_link_t *link)
 	link->dev = &dev->node;
 	
 	/* Finally, report what we've done */
-	printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-	       dev->node.dev_name, link->conf.ConfigIndex,
-	       link->conf.Vcc/10, link->conf.Vcc%10);
-	if (link->conf.Vpp1)
-		printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+	printk(KERN_INFO "%s: index 0x%02x: ",
+	       dev->node.dev_name, link->conf.ConfigIndex);
+	if (link->conf.Vpp)
+		printk(", Vpp %d.%d", link->conf.Vpp/10, link->conf.Vpp%10);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq.AssignedIRQ);
 	if (link->io.NumPorts1)
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
index 89dbc783ff8..53fdaa22226 100644
--- a/drivers/net/wireless/atmel_cs.c
+++ b/drivers/net/wireless/atmel_cs.c
@@ -179,7 +179,6 @@ static int atmel_attach(struct pcmcia_device *p_dev)
 	  device, and can be hard-wired here.
 	*/
 	link->conf.Attributes = 0;
-	link->conf.Vcc = 50;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	/* Allocate space for private device-specific data */
@@ -314,16 +313,11 @@ static void atmel_config(dev_link_t *link)
 		
 		/* Use power settings for Vcc and Vpp if present */
 		/*  Note that the CIS values need to be rescaled */
-		if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
-		else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
-		
 		if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
 		else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
 		
 		/* Do we need to allocate an interrupt? */
diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c
index 0fb62518545..69024bfb5bb 100644
--- a/drivers/net/wireless/hostap/hostap_cs.c
+++ b/drivers/net/wireless/hostap/hostap_cs.c
@@ -512,7 +512,6 @@ static int prism2_attach(struct pcmcia_device *p_dev)
 	memset(link, 0, sizeof(dev_link_t));
 
 	PDEBUG(DEBUG_HW, "%s: setting Vcc=33 (constant)\n", dev_info);
-	link->conf.Vcc = 33;
 	link->conf.IntType = INT_MEMORY_AND_IO;
 
 	link->handle = p_dev;
@@ -603,9 +602,6 @@ static int prism2_config(dev_link_t *link)
 
 	CS_CHECK(GetConfigurationInfo,
 		 pcmcia_get_configuration_info(link->handle, &conf));
-	PDEBUG(DEBUG_HW, "%s: %s Vcc=%d (from config)\n", dev_info,
-	       ignore_cis_vcc ? "ignoring" : "setting", conf.Vcc);
-	link->conf.Vcc = conf.Vcc;
 
 	/* Look for an appropriate configuration table entry in the CIS */
 	tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
@@ -650,10 +646,10 @@ static int prism2_config(dev_link_t *link)
 		}
 
 		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 				dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 
 		/* Do we need to allocate an interrupt? */
@@ -745,12 +741,11 @@ static int prism2_config(dev_link_t *link)
 	dev->base_addr = link->io.BasePort1;
 
 	/* Finally, report what we've done */
-	printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
-	       dev_info, link->conf.ConfigIndex,
-	       link->conf.Vcc / 10, link->conf.Vcc % 10);
-	if (link->conf.Vpp1)
-		printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-		       link->conf.Vpp1 % 10);
+	printk(KERN_INFO "%s: index 0x%02x: ",
+	       dev_info, link->conf.ConfigIndex);
+	if (link->conf.Vpp)
+		printk(", Vpp %d.%d", link->conf.Vpp / 10,
+		       link->conf.Vpp % 10);
 	if (link->conf.Attributes & CONF_ENABLE_IRQ)
 		printk(", irq %d", link->irq.AssignedIRQ);
 	if (link->io.NumPorts1)
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
index 545717b5e1e..23d6b3376e6 100644
--- a/drivers/net/wireless/netwave_cs.c
+++ b/drivers/net/wireless/netwave_cs.c
@@ -406,7 +406,6 @@ static int netwave_attach(struct pcmcia_device *p_dev)
     
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
index 89e16cd1be8..75981d88a1e 100644
--- a/drivers/net/wireless/orinoco_cs.c
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -218,8 +218,7 @@ orinoco_cs_config(dev_link_t *link)
 
 	/* Look up the current Vcc */
 	CS_CHECK(GetConfigurationInfo,
-		 pcmcia_get_configuration_info(handle, &conf));
-	link->conf.Vcc = conf.Vcc;
+		 pcmcia_get_configuration_info(link->handle, &conf));
 
 	/*
 	 * In this loop, we scan the CIS for configuration table
@@ -274,10 +273,10 @@ orinoco_cs_config(dev_link_t *link)
 		}
 
 		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 			    cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 			    dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		
 		/* Do we need to allocate an interrupt? */
@@ -373,12 +372,11 @@ orinoco_cs_config(dev_link_t *link)
 	link->state &= ~DEV_CONFIG_PENDING;
 
 	/* Finally, report what we've done */
-	printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
-	       dev->name, link->conf.ConfigIndex,
-	       link->conf.Vcc / 10, link->conf.Vcc % 10);
-	if (link->conf.Vpp1)
-		printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-		       link->conf.Vpp1 % 10);
+	printk(KERN_DEBUG "%s: index 0x%02x: ",
+	       dev->name, link->conf.ConfigIndex);
+	if (link->conf.Vpp)
+		printk(", Vpp %d.%d", link->conf.Vpp / 10,
+		       link->conf.Vpp % 10);
 	printk(", irq %d", link->irq.AssignedIRQ);
 	if (link->io.NumPorts1)
 		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
index ed4bf5013f1..7d95587d09d 100644
--- a/drivers/net/wireless/ray_cs.c
+++ b/drivers/net/wireless/ray_cs.c
@@ -342,7 +342,6 @@ static int ray_attach(struct pcmcia_device *p_dev)
 
     /* General socket configuration */
     link->conf.Attributes = CONF_ENABLE_IRQ;
-    link->conf.Vcc = 50;
     link->conf.IntType = INT_MEMORY_AND_IO;
     link->conf.ConfigIndex = 1;
     link->conf.Present = PRESENT_OPTION;
diff --git a/drivers/net/wireless/spectrum_cs.c b/drivers/net/wireless/spectrum_cs.c
index 0429f1dc7fa..7a4a80b01f9 100644
--- a/drivers/net/wireless/spectrum_cs.c
+++ b/drivers/net/wireless/spectrum_cs.c
@@ -692,7 +692,6 @@ spectrum_cs_config(dev_link_t *link)
 	/* Look up the current Vcc */
 	CS_CHECK(GetConfigurationInfo,
 		 pcmcia_get_configuration_info(handle, &conf));
-	link->conf.Vcc = conf.Vcc;
 
 	/*
 	 * In this loop, we scan the CIS for configuration table
@@ -747,10 +746,10 @@ spectrum_cs_config(dev_link_t *link)
 		}
 
 		if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 			    cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
-			link->conf.Vpp1 = link->conf.Vpp2 =
+			link->conf.Vpp =
 			    dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
 		
 		/* Do we need to allocate an interrupt? */
@@ -851,12 +850,11 @@ spectrum_cs_config(dev_link_t *link)
 	link->state &= ~DEV_CONFIG_PENDING;
 
 	/* Finally, report what we've done */
-	printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
-	       dev->name, link->conf.ConfigIndex,
-	       link->conf.Vcc / 10, link->conf.Vcc % 10);
-	if (link->conf.Vpp1)
-		printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
-		       link->conf.Vpp1 % 10);
+	printk(KERN_DEBUG "%s: index 0x%02x: ",
+	       dev->name, link->conf.ConfigIndex);
+	if (link->conf.Vpp)
+		printk(", Vpp %d.%d", link->conf.Vpp / 10,
+		       link->conf.Vpp % 10);
 	printk(", irq %d", link->irq.AssignedIRQ);
 	if (link->io.NumPorts1)
 		printk(", io 0x%04x-0x%04x", link->io.BasePort1,
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
index 8cabcfe3a65..daa17dc3432 100644
--- a/drivers/net/wireless/wavelan_cs.c
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -4607,7 +4607,6 @@ wavelan_attach(struct pcmcia_device *p_dev)
 
   /* General socket configuration */
   link->conf.Attributes = CONF_ENABLE_IRQ;
-  link->conf.Vcc = 50;
   link->conf.IntType = INT_MEMORY_AND_IO;
 
   /* Chain drivers */
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
index 3a93a8bb2e1..393b5cb7a52 100644
--- a/drivers/net/wireless/wl3501_cs.c
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -1976,7 +1976,6 @@ static int wl3501_attach(struct pcmcia_device *p_dev)
 
 	/* General socket configuration */
 	link->conf.Attributes	= CONF_ENABLE_IRQ;
-	link->conf.Vcc		= 50;
 	link->conf.IntType	= INT_MEMORY_AND_IO;
 	link->conf.ConfigIndex	= 1;
 	link->conf.Present	= PRESENT_OPTION;