Merge git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300

* git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-2.6-mn10300: (44 commits)
  MN10300: Save frame pointer in thread_info struct rather than global var
  MN10300: Change "Matsushita" to "Panasonic".
  MN10300: Create a defconfig for the ASB2364 board
  MN10300: Update the ASB2303 defconfig
  MN10300: ASB2364: Add support for SMSC911X and SMC911X
  MN10300: ASB2364: Handle the IRQ multiplexer in the FPGA
  MN10300: Generic time support
  MN10300: Specify an ELF HWCAP flag for MN10300 Atomic Operations Unit support
  MN10300: Map userspace atomic op regs as a vmalloc page
  MN10300: And Panasonic AM34 subarch and implement SMP
  MN10300: Delete idle_timestamp from irq_cpustat_t
  MN10300: Make various interrupt priority settings configurable
  MN10300: Optimise do_csum()
  MN10300: Implement atomic ops using atomic ops unit
  MN10300: Make the FPU operate in non-lazy mode under SMP
  MN10300: SMP TLB flushing
  MN10300: Use the [ID]PTEL2 registers rather than [ID]PTEL for TLB control
  MN10300: Make the use of PIDR to mark TLB entries controllable
  MN10300: Rename __flush_tlb*() to local_flush_tlb*()
  MN10300: AM34 erratum requires MMUCTR read and write on exception entry
  ...

3 files changed, 23 insertions, 3 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 86fe67fd49b..9334539ebf7 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1041,7 +1041,7 @@ config SMC911X
 	tristate "SMSC LAN911[5678] support"
 	select CRC32
 	select MII
-	depends on ARM || SUPERH
+	depends on ARM || SUPERH || MN10300
 	help
 	  This is a driver for SMSC's LAN911x series of Ethernet chipsets
 	  including the new LAN9115, LAN9116, LAN9117, and LAN9118.
@@ -1055,7 +1055,7 @@ config SMC911X
 
 config SMSC911X
 	tristate "SMSC LAN911x/LAN921x families embedded ethernet support"
-	depends on ARM || SUPERH || BLACKFIN || MIPS
+	depends on ARM || SUPERH || BLACKFIN || MIPS || MN10300
 	select CRC32
 	select MII
 	select PHYLIB
@@ -1067,6 +1067,14 @@ config SMSC911X
 	  <file:Documentation/networking/net-modules.txt>. The module
 	  will be called smsc911x.
 
+config SMSC911X_ARCH_HOOKS
+	def_bool n
+	depends on SMSC911X
+	help
+	  If the arch enables this, it allows the arch to implement various
+	  hooks for more comprehensive interrupt control and also to override
+	  the source of the MAC address.
+
 config NET_VENDOR_RACAL
 	bool "Racal-Interlan (Micom) NI cards"
 	depends on ISA
diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c
index a8e5856ce88..64bfdae5956 100644
--- a/drivers/net/smsc911x.c
+++ b/drivers/net/smsc911x.c
@@ -2075,7 +2075,7 @@ static int __devinit smsc911x_drv_probe(struct platform_device *pdev)
 	} else {
 		/* Try reading mac address from device. if EEPROM is present
 		 * it will already have been set */
-		smsc911x_read_mac_address(dev);
+		smsc_get_mac(dev);
 
 		if (is_valid_ether_addr(dev->dev_addr)) {
 			/* eeprom values are valid  so use them */
@@ -2176,6 +2176,7 @@ static struct platform_driver smsc911x_driver = {
 /* Entry point for loading the module */
 static int __init smsc911x_init_module(void)
 {
+	SMSC_INITIALIZE();
 	return platform_driver_register(&smsc911x_driver);
 }
 
diff --git a/drivers/net/smsc911x.h b/drivers/net/smsc911x.h
index 016360c65ce..52f38e12a87 100644
--- a/drivers/net/smsc911x.h
+++ b/drivers/net/smsc911x.h
@@ -394,4 +394,15 @@
 #define LPA_PAUSE_ALL			(LPA_PAUSE_CAP | \
 					 LPA_PAUSE_ASYM)
 
+/*
+ * Provide hooks to let the arch add to the initialisation procedure
+ * and to override the source of the MAC address.
+ */
+#define SMSC_INITIALIZE()		do {} while (0)
+#define smsc_get_mac(dev)		smsc911x_read_mac_address((dev))
+
+#ifdef CONFIG_SMSC911X_ARCH_HOOKS
+#include <asm/smsc911x.h>
+#endif
+
 #endif				/* __SMSC911X_H__ */