diff options
| author | stephen hemminger <shemminger@vyatta.com> | 2012-03-21 05:32:05 +0000 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2012-03-21 16:54:36 -0400 |
| commit | 5676cc7bfe1e388e87843f71daa229610385b41e (patch) | |
| tree | a46908a8b9e428e4689fd58d6c3b50fd53781993 /drivers/net | |
| parent | 2a2a459eeeff48640dc557548ce576d666ab06ed (diff) | |
sky2: override for PCI legacy power management
Some BIOS's don't setup power management correctly (what else is
new) and don't allow use of PCI Express power control. Add a special
exception module parameter to allow working around this issue.
Based on slightly different patch by Knut Petersen.
Reported-by: Arkadiusz Miskiewicz <arekm@maven.pl>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
| -rw-r--r-- | drivers/net/ethernet/marvell/sky2.c | 11 |
1 files changed, 11 insertions, 0 deletions
diff --git a/drivers/net/ethernet/marvell/sky2.c b/drivers/net/ethernet/marvell/sky2.c index 82c2c86a195..423a1a2a702 100644 --- a/drivers/net/ethernet/marvell/sky2.c +++ b/drivers/net/ethernet/marvell/sky2.c @@ -95,6 +95,10 @@ static int disable_msi = 0; module_param(disable_msi, int, 0); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); +static int legacy_pme = 0; +module_param(legacy_pme, int, 0); +MODULE_PARM_DESC(legacy_pme, "Legacy power management"); + static DEFINE_PCI_DEVICE_TABLE(sky2_id_table) = { { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9000) }, /* SK-9Sxx */ { PCI_DEVICE(PCI_VENDOR_ID_SYSKONNECT, 0x9E00) }, /* SK-9Exx */ @@ -867,6 +871,13 @@ static void sky2_wol_init(struct sky2_port *sky2) /* Disable PiG firmware */ sky2_write16(hw, B0_CTST, Y2_HW_WOL_OFF); + /* Needed by some broken BIOSes, use PCI rather than PCI-e for WOL */ + if (legacy_pme) { + u32 reg1 = sky2_pci_read32(hw, PCI_DEV_REG1); + reg1 |= PCI_Y2_PME_LEGACY; + sky2_pci_write32(hw, PCI_DEV_REG1, reg1); + } + /* block receiver */ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET); sky2_read32(hw, B0_CTST); |