summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorCindy H Kao <cindy.h.kao@intel.com>2010-04-07 19:42:42 -0700
committerInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>2010-05-11 14:05:30 -0700
commitf4e413458104210bc29aa5c437882c68b4b20100 (patch)
tree72508e9a5d3620986120304db7fe78f0326b0743 /drivers/net
parent49d72df3f6cd63b49528306a2577ae7a6a0e9d6b (diff)
wimax/i2400m: fix for missed reset events if triggered by dev_reset_handle()
The problem is only seen on SDIO interface since on USB, a bus reset would really re-probe the driver, but on SDIO interface, a bus reset will not re-enumerate the SDIO bus, so no driver re-probe is happening. Therefore, on SDIO interface, the reset event should be still detected and handled by dev_reset_handle(). Problem description: Whenever a reboot barker is received during operational mode (i2400m->boot_mode == 0), dev_reset_handle() is invoked to handle that function reset event. dev_reset_handle() then sets the flag i2400m->boot_mode to 1 indicating the device is back to bootmode before proceeding to dev_stop() and dev_start(). If dev_start() returns failure, a bus reset is triggered by dev_reset_handle(). The flag i2400m->boot_mode then remains 1 when the second reboot barker arrives. However the interrupt service routine i2400ms_rx() instead of invoking dev_reset_handle() to handle that reset event, it filters out that boot event to bootmode because it sees the flag i2400m->boot_mode equal to 1. The fix: Maintain the flag i2400m->boot_mode within dev_reset_handle() and set the flag i2400m->boot_mode to 1 when entering dev_reset_handle(). It remains 1 until the dev_reset_handle() issues a bus reset. ie: the bus reset is taking place just like it happens for the first time during operational mode. To denote the actual device state and the state we expect, a flag i2400m->alive is introduced in addition to the existing flag i2400m->updown. It's maintained with the same way for i2400m->updown but instead of reflecting the actual state like i2400m->updown does, i2400m->alive maintains the state we expect. i2400m->alive is set 1 just like whenever i2400m->updown is set 1. Yet i2400m->alive remains 1 since we expect the device to be up all the time until the driver is removed. See the doc for @alive in i2400m.h. An enumeration I2400M_BUS_RESET_RETRIES is added to define the maximum number of bus resets that a device reboot can retry. A counter i2400m->bus_reset_retries is added to track how many bus resets have been retried in one device reboot. If I2400M_BUS_RESET_RETRIES bus resets were retried in this boot, we give up any further retrying so the device would enter low power state. The counter i2400m->bus_reset_retries is incremented whenever dev_reset_handle() is issuing a bus reset and is cleared to 0 when dev_start() is successfully done, ie: a successful reboot. Signed-off-by: Cindy H Kao <cindy.h.kao@intel.com>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/wimax/i2400m/driver.c68
-rw-r--r--drivers/net/wimax/i2400m/i2400m.h34
2 files changed, 86 insertions, 16 deletions
diff --git a/drivers/net/wimax/i2400m/driver.c b/drivers/net/wimax/i2400m/driver.c
index 3a6c8ddb535..1674dba43f8 100644
--- a/drivers/net/wimax/i2400m/driver.c
+++ b/drivers/net/wimax/i2400m/driver.c
@@ -436,7 +436,8 @@ int i2400m_dev_start(struct i2400m *i2400m, enum i2400m_bri bm_flags)
result = __i2400m_dev_start(i2400m, bm_flags);
if (result >= 0) {
i2400m->updown = 1;
- wmb(); /* see i2400m->updown's documentation */
+ i2400m->alive = 1;
+ wmb();/* see i2400m->updown and i2400m->alive's doc */
}
}
mutex_unlock(&i2400m->init_mutex);
@@ -497,7 +498,8 @@ void i2400m_dev_stop(struct i2400m *i2400m)
if (i2400m->updown) {
__i2400m_dev_stop(i2400m);
i2400m->updown = 0;
- wmb(); /* see i2400m->updown's documentation */
+ i2400m->alive = 0;
+ wmb(); /* see i2400m->updown and i2400m->alive's doc */
}
mutex_unlock(&i2400m->init_mutex);
}
@@ -669,6 +671,9 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
d_fnstart(3, dev, "(ws %p i2400m %p reason %s)\n", ws, i2400m, reason);
+ i2400m->boot_mode = 1;
+ wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */
+
result = 0;
if (mutex_trylock(&i2400m->init_mutex) == 0) {
/* We are still in i2400m_dev_start() [let it fail] or
@@ -679,32 +684,62 @@ void __i2400m_dev_reset_handle(struct work_struct *ws)
complete(&i2400m->msg_completion);
goto out;
}
- if (i2400m->updown == 0) {
- dev_info(dev, "%s: device is down, doing nothing\n", reason);
- goto out_unlock;
- }
+
dev_err(dev, "%s: reinitializing driver\n", reason);
- __i2400m_dev_stop(i2400m);
- result = __i2400m_dev_start(i2400m,
- I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
- if (result < 0) {
+ rmb();
+ if (i2400m->updown) {
+ __i2400m_dev_stop(i2400m);
i2400m->updown = 0;
wmb(); /* see i2400m->updown's documentation */
- dev_err(dev, "%s: cannot start the device: %d\n",
- reason, result);
- result = -EUCLEAN;
}
-out_unlock:
+
+ if (i2400m->alive) {
+ result = __i2400m_dev_start(i2400m,
+ I2400M_BRI_SOFT | I2400M_BRI_MAC_REINIT);
+ if (result < 0) {
+ dev_err(dev, "%s: cannot start the device: %d\n",
+ reason, result);
+ result = -EUCLEAN;
+ if (atomic_read(&i2400m->bus_reset_retries)
+ >= I2400M_BUS_RESET_RETRIES) {
+ result = -ENODEV;
+ dev_err(dev, "tried too many times to "
+ "reset the device, giving up\n");
+ }
+ }
+ }
+
if (i2400m->reset_ctx) {
ctx->result = result;
complete(&ctx->completion);
}
mutex_unlock(&i2400m->init_mutex);
if (result == -EUCLEAN) {
+ /*
+ * We come here because the reset during operational mode
+ * wasn't successully done and need to proceed to a bus
+ * reset. For the dev_reset_handle() to be able to handle
+ * the reset event later properly, we restore boot_mode back
+ * to the state before previous reset. ie: just like we are
+ * issuing the bus reset for the first time
+ */
+ i2400m->boot_mode = 0;
+ wmb();
+
+ atomic_inc(&i2400m->bus_reset_retries);
/* ops, need to clean up [w/ init_mutex not held] */
result = i2400m_reset(i2400m, I2400M_RT_BUS);
if (result >= 0)
result = -ENODEV;
+ } else {
+ rmb();
+ if (i2400m->alive) {
+ /* great, we expect the device state up and
+ * dev_start() actually brings the device state up */
+ i2400m->updown = 1;
+ wmb();
+ atomic_set(&i2400m->bus_reset_retries, 0);
+ }
}
out:
i2400m_put(i2400m);
@@ -729,8 +764,6 @@ out:
*/
int i2400m_dev_reset_handle(struct i2400m *i2400m, const char *reason)
{
- i2400m->boot_mode = 1;
- wmb(); /* Make sure i2400m_msg_to_dev() sees boot_mode */
return i2400m_schedule_work(i2400m, __i2400m_dev_reset_handle,
GFP_ATOMIC, &reason, sizeof(reason));
}
@@ -803,6 +836,9 @@ void i2400m_init(struct i2400m *i2400m)
mutex_init(&i2400m->init_mutex);
/* wake_tx_ws is initialized in i2400m_tx_setup() */
+ atomic_set(&i2400m->bus_reset_retries, 0);
+
+ i2400m->alive = 0;
}
EXPORT_SYMBOL_GPL(i2400m_init);
diff --git a/drivers/net/wimax/i2400m/i2400m.h b/drivers/net/wimax/i2400m/i2400m.h
index da218b98e27..ad8e6a3be1e 100644
--- a/drivers/net/wimax/i2400m/i2400m.h
+++ b/drivers/net/wimax/i2400m/i2400m.h
@@ -177,6 +177,11 @@ enum {
I2400M_BM_ACK_BUF_SIZE = 256,
};
+enum {
+ /* Maximum number of bus reset can be retried */
+ I2400M_BUS_RESET_RETRIES = 3,
+};
+
/**
* struct i2400m_poke_table - Hardware poke table for the Intel 2400m
*
@@ -517,6 +522,29 @@ struct i2400m_barker_db;
* same.
*
* @pm_notifier: used to register for PM events
+ *
+ * @bus_reset_retries: counter for the number of bus resets attempted for
+ * this boot. It's not for tracking the number of bus resets during
+ * the whole driver life cycle (from insmod to rmmod) but for the
+ * number of dev_start() executed until dev_start() returns a success
+ * (ie: a good boot means a dev_stop() followed by a successful
+ * dev_start()). dev_reset_handler() increments this counter whenever
+ * it is triggering a bus reset. It checks this counter to decide if a
+ * subsequent bus reset should be retried. dev_reset_handler() retries
+ * the bus reset until dev_start() succeeds or the counter reaches
+ * I2400M_BUS_RESET_RETRIES. The counter is cleared to 0 in
+ * dev_reset_handle() when dev_start() returns a success,
+ * ie: a successul boot is completed.
+ *
+ * @alive: flag to denote if the device *should* be alive. This flag is
+ * everything like @updown (see doc for @updown) except reflecting
+ * the device state *we expect* rather than the actual state as denoted
+ * by @updown. It is set 1 whenever @updown is set 1 in dev_start().
+ * Then the device is expected to be alive all the time
+ * (i2400m->alive remains 1) until the driver is removed. Therefore
+ * all the device reboot events detected can be still handled properly
+ * by either dev_reset_handle() or .pre_reset/.post_reset as long as
+ * the driver presents. It is set 0 along with @updown in dev_stop().
*/
struct i2400m {
struct wimax_dev wimax_dev; /* FIRST! See doc */
@@ -591,6 +619,12 @@ struct i2400m {
struct i2400m_barker_db *barker;
struct notifier_block pm_notifier;
+
+ /* counting bus reset retries in this boot */
+ atomic_t bus_reset_retries;
+
+ /* if the device is expected to be alive */
+ unsigned alive;
};