/spare/repo/netdev-2.6 branch 'master'

100 files changed, 18642 insertions, 4094 deletions

diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 8edb6936fb9..e0239a10d32 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -131,6 +131,8 @@ config NET_SB1000
 
 	source "drivers/net/arcnet/Kconfig"
 
+source "drivers/net/phy/Kconfig"
+
 #
 #	Ethernet
 #
@@ -1921,6 +1923,17 @@ config R8169_VLAN
 	  
 	  If in doubt, say Y.
 
+config SIS190
+	tristate "SiS190 gigabit ethernet support"
+	depends on PCI
+	select CRC32
+	select MII
+	---help---
+	  Say Y here if you have a SiS 190 PCI Gigabit Ethernet adapter.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called sis190.  This is recommended.
+
 config SKGE
 	tristate "New SysKonnect GigaEthernet support (EXPERIMENTAL)"
 	depends on PCI && EXPERIMENTAL
@@ -2091,6 +2104,25 @@ endmenu
 menu "Ethernet (10000 Mbit)"
 	depends on !UML
 
+config CHELSIO_T1
+        tristate "Chelsio 10Gb Ethernet support"
+        depends on PCI
+        help
+          This driver supports Chelsio N110 and N210 models 10Gb Ethernet
+          cards. More information about adapter features and performance
+          tuning is in <file:Documentation/networking/cxgb.txt>.
+
+          For general information about Chelsio and our products, visit
+          our website at <http://www.chelsio.com>.
+
+          For customer support, please visit our customer support page at
+          <http://www.chelsio.com/support.htm>.
+
+          Please send feedback to <linux-bugs@chelsio.com>.
+
+          To compile this driver as a module, choose M here: the module
+          will be called cxgb.
+
 config IXGB
 	tristate "Intel(R) PRO/10GbE support"
 	depends on PCI
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 63c6d1e6d4d..5baafcd5561 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -9,6 +9,7 @@ endif
 obj-$(CONFIG_E1000) += e1000/
 obj-$(CONFIG_IBM_EMAC) += ibm_emac/
 obj-$(CONFIG_IXGB) += ixgb/
+obj-$(CONFIG_CHELSIO_T1) += chelsio/
 obj-$(CONFIG_BONDING) += bonding/
 obj-$(CONFIG_GIANFAR) += gianfar_driver.o
 
@@ -42,6 +43,7 @@ obj-$(CONFIG_EEPRO100) += eepro100.o
 obj-$(CONFIG_E100) += e100.o
 obj-$(CONFIG_TLAN) += tlan.o
 obj-$(CONFIG_EPIC100) += epic100.o
+obj-$(CONFIG_SIS190) += sis190.o
 obj-$(CONFIG_SIS900) += sis900.o
 obj-$(CONFIG_YELLOWFIN) += yellowfin.o
 obj-$(CONFIG_ACENIC) += acenic.o
@@ -65,6 +67,7 @@ obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
 #
 
 obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_PHYLIB) += phy/
 
 obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
diff --git a/drivers/net/Space.c b/drivers/net/Space.c
index 3707df6b0cf..60304f7e7e5 100644
--- a/drivers/net/Space.c
+++ b/drivers/net/Space.c
@@ -87,7 +87,6 @@ extern struct net_device *mvme147lance_probe(int unit);
 extern struct net_device *tc515_probe(int unit);
 extern struct net_device *lance_probe(int unit);
 extern struct net_device *mace_probe(int unit);
-extern struct net_device *macsonic_probe(int unit);
 extern struct net_device *mac8390_probe(int unit);
 extern struct net_device *mac89x0_probe(int unit);
 extern struct net_device *mc32_probe(int unit);
@@ -284,9 +283,6 @@ static struct devprobe2 m68k_probes[] __initdata = {
 #ifdef CONFIG_MACMACE		/* Mac 68k Quadra AV builtin Ethernet */
 	{mace_probe, 0},
 #endif
-#ifdef CONFIG_MACSONIC		/* Mac SONIC-based Ethernet of all sorts */ 
-	{macsonic_probe, 0},
-#endif
 #ifdef CONFIG_MAC8390           /* NuBus NS8390-based cards */
 	{mac8390_probe, 0},
 #endif
@@ -318,17 +314,9 @@ static void __init ethif_probe2(int unit)
 #ifdef CONFIG_TR
 /* Token-ring device probe */
 extern int ibmtr_probe_card(struct net_device *);
-extern struct net_device *sk_isa_probe(int unit);
-extern struct net_device *proteon_probe(int unit);
 extern struct net_device *smctr_probe(int unit);
 
 static struct devprobe2 tr_probes2[] __initdata = {
-#ifdef CONFIG_SKISA
-	{sk_isa_probe, 0},
-#endif
-#ifdef CONFIG_PROTEON
-	{proteon_probe, 0},
-#endif
 #ifdef CONFIG_SMCTR
 	{smctr_probe, 0},
 #endif
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index 8acc655ec1e..7babf6af4e2 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -14,8 +14,8 @@
 
 #define DRV_MODULE_NAME		"bnx2"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"1.2.19"
-#define DRV_MODULE_RELDATE	"May 23, 2005"
+#define DRV_MODULE_VERSION	"1.2.20"
+#define DRV_MODULE_RELDATE	"August 22, 2005"
 
 #define RUN_AT(x) (jiffies + (x))
 
@@ -52,7 +52,6 @@ static struct {
 	{ "HP NC370i Multifunction Gigabit Server Adapter" },
 	{ "Broadcom NetXtreme II BCM5706 1000Base-SX" },
 	{ "HP NC370F Multifunction Gigabit Server Adapter" },
-	{ 0 },
 	};
 
 static struct pci_device_id bnx2_pci_tbl[] = {
@@ -108,6 +107,15 @@ static struct flash_spec flash_table[] =
 
 MODULE_DEVICE_TABLE(pci, bnx2_pci_tbl);
 
+static inline u32 bnx2_tx_avail(struct bnx2 *bp)
+{
+	u32 diff = TX_RING_IDX(bp->tx_prod) - TX_RING_IDX(bp->tx_cons);
+
+	if (diff > MAX_TX_DESC_CNT)
+		diff = (diff & MAX_TX_DESC_CNT) - 1;
+	return (bp->tx_ring_size - diff);
+}
+
 static u32
 bnx2_reg_rd_ind(struct bnx2 *bp, u32 offset)
 {
@@ -807,7 +815,19 @@ bnx2_setup_serdes_phy(struct bnx2 *bp)
 		bnx2_write_phy(bp, MII_ADVERTISE, new_adv);
 		bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART |
 			BMCR_ANENABLE);
-		bp->serdes_an_pending = SERDES_AN_TIMEOUT / bp->timer_interval;
+		if (CHIP_NUM(bp) == CHIP_NUM_5706) {
+			/* Speed up link-up time when the link partner
+			 * does not autonegotiate which is very common
+			 * in blade servers. Some blade servers use
+			 * IPMI for kerboard input and it's important
+			 * to minimize link disruptions. Autoneg. involves
+			 * exchanging base pages plus 3 next pages and
+			 * normally completes in about 120 msec.
+			 */
+			bp->current_interval = SERDES_AN_TIMEOUT;
+			bp->serdes_an_pending = 1;
+			mod_timer(&bp->timer, jiffies + bp->current_interval);
+		}
 	}
 
 	return 0;
@@ -1327,22 +1347,17 @@ bnx2_tx_int(struct bnx2 *bp)
 		}
 	}
 
-	atomic_add(tx_free_bd, &bp->tx_avail_bd);
+	bp->tx_cons = sw_cons;
 
 	if (unlikely(netif_queue_stopped(bp->dev))) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&bp->tx_lock, flags);
+		spin_lock(&bp->tx_lock);
 		if ((netif_queue_stopped(bp->dev)) &&
-			(atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)) {
+		    (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)) {
 
 			netif_wake_queue(bp->dev);
 		}
-		spin_unlock_irqrestore(&bp->tx_lock, flags);
+		spin_unlock(&bp->tx_lock);
 	}
-
-	bp->tx_cons = sw_cons;
-
 }
 
 static inline void
@@ -1523,15 +1538,12 @@ bnx2_msi(int irq, void *dev_instance, struct pt_regs *regs)
 		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
 
 	/* Return here if interrupt is disabled. */
-	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		return IRQ_RETVAL(1);
-	}
+	if (unlikely(atomic_read(&bp->intr_sem) != 0))
+		return IRQ_HANDLED;
 
-	if (netif_rx_schedule_prep(dev)) {
-		__netif_rx_schedule(dev);
-	}
+	netif_rx_schedule(dev);
 
-	return IRQ_RETVAL(1);
+	return IRQ_HANDLED;
 }
 
 static irqreturn_t
@@ -1549,22 +1561,19 @@ bnx2_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
 	if ((bp->status_blk->status_idx == bp->last_status_idx) ||
 	    (REG_RD(bp, BNX2_PCICFG_MISC_STATUS) &
 	     BNX2_PCICFG_MISC_STATUS_INTA_VALUE))
-		return IRQ_RETVAL(0);
+		return IRQ_NONE;
 
 	REG_WR(bp, BNX2_PCICFG_INT_ACK_CMD,
 		BNX2_PCICFG_INT_ACK_CMD_USE_INT_HC_PARAM |
 		BNX2_PCICFG_INT_ACK_CMD_MASK_INT);
 
 	/* Return here if interrupt is shared and is disabled. */
-	if (unlikely(atomic_read(&bp->intr_sem) != 0)) {
-		return IRQ_RETVAL(1);
-	}
+	if (unlikely(atomic_read(&bp->intr_sem) != 0))
+		return IRQ_HANDLED;
 
-	if (netif_rx_schedule_prep(dev)) {
-		__netif_rx_schedule(dev);
-	}
+	netif_rx_schedule(dev);
 
-	return IRQ_RETVAL(1);
+	return IRQ_HANDLED;
 }
 
 static int
@@ -1581,11 +1590,9 @@ bnx2_poll(struct net_device *dev, int *budget)
 		(bp->status_blk->status_attn_bits_ack &
 		STATUS_ATTN_BITS_LINK_STATE)) {
 
-		unsigned long flags;
-
-		spin_lock_irqsave(&bp->phy_lock, flags);
+		spin_lock(&bp->phy_lock);
 		bnx2_phy_int(bp);
-		spin_unlock_irqrestore(&bp->phy_lock, flags);
+		spin_unlock(&bp->phy_lock);
 	}
 
 	if (bp->status_blk->status_tx_quick_consumer_index0 != bp->tx_cons) {
@@ -1628,9 +1635,8 @@ bnx2_set_rx_mode(struct net_device *dev)
 	struct bnx2 *bp = dev->priv;
 	u32 rx_mode, sort_mode;
 	int i;
-	unsigned long flags;
 
-	spin_lock_irqsave(&bp->phy_lock, flags);
+	spin_lock_bh(&bp->phy_lock);
 
 	rx_mode = bp->rx_mode & ~(BNX2_EMAC_RX_MODE_PROMISCUOUS |
 				  BNX2_EMAC_RX_MODE_KEEP_VLAN_TAG);
@@ -1691,7 +1697,7 @@ bnx2_set_rx_mode(struct net_device *dev)
 	REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode);
 	REG_WR(bp, BNX2_RPM_SORT_USER0, sort_mode | BNX2_RPM_SORT_USER0_ENA);
 
-	spin_unlock_irqrestore(&bp->phy_lock, flags);
+	spin_unlock_bh(&bp->phy_lock);
 }
 
 static void
@@ -2960,7 +2966,6 @@ bnx2_init_tx_ring(struct bnx2 *bp)
 	bp->tx_prod = 0;
 	bp->tx_cons = 0;
 	bp->tx_prod_bseq = 0;
-	atomic_set(&bp->tx_avail_bd, bp->tx_ring_size);
 	
 	val = BNX2_L2CTX_TYPE_TYPE_L2;
 	val |= BNX2_L2CTX_TYPE_SIZE_L2;
@@ -3507,11 +3512,11 @@ bnx2_test_registers(struct bnx2 *bp)
 		rw_mask = reg_tbl[i].rw_mask;
 		ro_mask = reg_tbl[i].ro_mask;
 
-		save_val = readl((u8 *) bp->regview + offset);
+		save_val = readl(bp->regview + offset);
 
-		writel(0, (u8 *) bp->regview + offset);
+		writel(0, bp->regview + offset);
 
-		val = readl((u8 *) bp->regview + offset);
+		val = readl(bp->regview + offset);
 		if ((val & rw_mask) != 0) {
 			goto reg_test_err;
 		}
@@ -3520,9 +3525,9 @@ bnx2_test_registers(struct bnx2 *bp)
 			goto reg_test_err;
 		}
 
-		writel(0xffffffff, (u8 *) bp->regview + offset);
+		writel(0xffffffff, bp->regview + offset);
 
-		val = readl((u8 *) bp->regview + offset);
+		val = readl(bp->regview + offset);
 		if ((val & rw_mask) != rw_mask) {
 			goto reg_test_err;
 		}
@@ -3531,11 +3536,11 @@ bnx2_test_registers(struct bnx2 *bp)
 			goto reg_test_err;
 		}
 
-		writel(save_val, (u8 *) bp->regview + offset);
+		writel(save_val, bp->regview + offset);
 		continue;
 
 reg_test_err:
-		writel(save_val, (u8 *) bp->regview + offset);
+		writel(save_val, bp->regview + offset);
 		ret = -ENODEV;
 		break;
 	}
@@ -3752,10 +3757,10 @@ bnx2_test_link(struct bnx2 *bp)
 {
 	u32 bmsr;
 
-	spin_lock_irq(&bp->phy_lock);
+	spin_lock_bh(&bp->phy_lock);
 	bnx2_read_phy(bp, MII_BMSR, &bmsr);
 	bnx2_read_phy(bp, MII_BMSR, &bmsr);
-	spin_unlock_irq(&bp->phy_lock);
+	spin_unlock_bh(&bp->phy_lock);
 		
 	if (bmsr & BMSR_LSTATUS) {
 		return 0;
@@ -3801,6 +3806,9 @@ bnx2_timer(unsigned long data)
 	struct bnx2 *bp = (struct bnx2 *) data;
 	u32 msg;
 
+	if (!netif_running(bp->dev))
+		return;
+
 	if (atomic_read(&bp->intr_sem) != 0)
 		goto bnx2_restart_timer;
 
@@ -3809,15 +3817,16 @@ bnx2_timer(unsigned long data)
 
 	if ((bp->phy_flags & PHY_SERDES_FLAG) &&
 	    (CHIP_NUM(bp) == CHIP_NUM_5706)) {
-		unsigned long flags;
 
-		spin_lock_irqsave(&bp->phy_lock, flags);
+		spin_lock(&bp->phy_lock);
 		if (bp->serdes_an_pending) {
 			bp->serdes_an_pending--;
 		}
 		else if ((bp->link_up == 0) && (bp->autoneg & AUTONEG_SPEED)) {
 			u32 bmcr;
 
+			bp->current_interval = bp->timer_interval;
+
 			bnx2_read_phy(bp, MII_BMCR, &bmcr);
 
 			if (bmcr & BMCR_ANENABLE) {
@@ -3860,14 +3869,14 @@ bnx2_timer(unsigned long data)
 
 			}
 		}
+		else
+			bp->current_interval = bp->timer_interval;
 
-		spin_unlock_irqrestore(&bp->phy_lock, flags);
+		spin_unlock(&bp->phy_lock);
 	}
 
 bnx2_restart_timer:
-	bp->timer.expires = RUN_AT(bp->timer_interval);
-
-	add_timer(&bp->timer);
+	mod_timer(&bp->timer, jiffies + bp->current_interval);
 }
 
 /* Called with rtnl_lock */
@@ -3920,12 +3929,7 @@ bnx2_open(struct net_device *dev)
 		return rc;
 	}
 	
-	init_timer(&bp->timer);
-
-	bp->timer.expires = RUN_AT(bp->timer_interval);
-	bp->timer.data = (unsigned long) bp;
-	bp->timer.function = bnx2_timer;
-	add_timer(&bp->timer);
+	mod_timer(&bp->timer, jiffies + bp->current_interval);
 
 	atomic_set(&bp->intr_sem, 0);
 
@@ -3976,12 +3980,17 @@ bnx2_reset_task(void *data)
 {
 	struct bnx2 *bp = data;
 
+	if (!netif_running(bp->dev))
+		return;
+
+	bp->in_reset_task = 1;
 	bnx2_netif_stop(bp);
 
 	bnx2_init_nic(bp);
 
 	atomic_set(&bp->intr_sem, 1);
 	bnx2_netif_start(bp);
+	bp->in_reset_task = 0;
 }
 
 static void
@@ -4041,9 +4050,7 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	u16 prod, ring_prod;
 	int i;
 
-	if (unlikely(atomic_read(&bp->tx_avail_bd) <
-		(skb_shinfo(skb)->nr_frags + 1))) {
-
+	if (unlikely(bnx2_tx_avail(bp) < (skb_shinfo(skb)->nr_frags + 1))) {
 		netif_stop_queue(dev);
 		printk(KERN_ERR PFX "%s: BUG! Tx ring full when queue awake!\n",
 			dev->name);
@@ -4140,8 +4147,6 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	prod = NEXT_TX_BD(prod);
 	bp->tx_prod_bseq += skb->len;
 
-	atomic_sub(last_frag + 1, &bp->tx_avail_bd);
-
 	REG_WR16(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BIDX, prod);
 	REG_WR(bp, MB_TX_CID_ADDR + BNX2_L2CTX_TX_HOST_BSEQ, bp->tx_prod_bseq);
 
@@ -4150,17 +4155,13 @@ bnx2_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	bp->tx_prod = prod;
 	dev->trans_start = jiffies;
 
-	if (unlikely(atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS)) {
-		unsigned long flags;
-
-		spin_lock_irqsave(&bp->tx_lock, flags);
-		if (atomic_read(&bp->tx_avail_bd) <= MAX_SKB_FRAGS) {
-			netif_stop_queue(dev);
-
-			if (atomic_read(&bp->tx_avail_bd) > MAX_SKB_FRAGS)
-				netif_wake_queue(dev);
-		}
-		spin_unlock_irqrestore(&bp->tx_lock, flags);
+	if (unlikely(bnx2_tx_avail(bp) <= MAX_SKB_FRAGS)) {
+		spin_lock(&bp->tx_lock);
+		netif_stop_queue(dev);
+		
+		if (bnx2_tx_avail(bp) > MAX_SKB_FRAGS)
+			netif_wake_queue(dev);
+		spin_unlock(&bp->tx_lock);
 	}
 
 	return NETDEV_TX_OK;
@@ -4173,7 +4174,13 @@ bnx2_close(struct net_device *dev)
 	struct bnx2 *bp = dev->priv;
 	u32 reset_code;
 
-	flush_scheduled_work();
+	/* Calling flush_scheduled_work() may deadlock because
+	 * linkwatch_event() may be on the workqueue and it will try to get
+	 * the rtnl_lock which we are holding.
+	 */
+	while (bp->in_reset_task)
+		msleep(1);
+
 	bnx2_netif_stop(bp);
 	del_timer_sync(&bp->timer);
 	if (bp->wol)
@@ -4390,11 +4397,11 @@ bnx2_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
 	bp->req_line_speed = req_line_speed;
 	bp->req_duplex = req_duplex;
 
-	spin_lock_irq(&bp->phy_lock);
+	spin_lock_bh(&bp->phy_lock);
 
 	bnx2_setup_phy(bp);
 
-	spin_unlock_irq(&bp->phy_lock);
+	spin_unlock_bh(&bp->phy_lock);
 
 	return 0;
 }
@@ -4464,19 +4471,20 @@ bnx2_nway_reset(struct net_device *dev)
 		return -EINVAL;
 	}
 
-	spin_lock_irq(&bp->phy_lock);
+	spin_lock_bh(&bp->phy_lock);
 
 	/* Force a link down visible on the other side */
 	if (bp->phy_flags & PHY_SERDES_FLAG) {
 		bnx2_write_phy(bp, MII_BMCR, BMCR_LOOPBACK);
-		spin_unlock_irq(&bp->phy_lock);
+		spin_unlock_bh(&bp->phy_lock);
 
 		msleep(20);
 
-		spin_lock_irq(&bp->phy_lock);
+		spin_lock_bh(&bp->phy_lock);
 		if (CHIP_NUM(bp) == CHIP_NUM_5706) {
-			bp->serdes_an_pending = SERDES_AN_TIMEOUT /
-				bp->timer_interval;
+			bp->current_interval = SERDES_AN_TIMEOUT;
+			bp->serdes_an_pending = 1;
+			mod_timer(&bp->timer, jiffies + bp->current_interval);
 		}
 	}
 
@@ -4484,7 +4492,7 @@ bnx2_nway_reset(struct net_device *dev)
 	bmcr &= ~BMCR_LOOPBACK;
 	bnx2_write_phy(bp, MII_BMCR, bmcr | BMCR_ANRESTART | BMCR_ANENABLE);
 
-	spin_unlock_irq(&bp->phy_lock);
+	spin_unlock_bh(&bp->phy_lock);
 
 	return 0;
 }
@@ -4670,11 +4678,11 @@ bnx2_set_pauseparam(struct net_device *dev, struct ethtool_pauseparam *epause)
 		bp->autoneg &= ~AUTONEG_FLOW_CTRL;
 	}
 
-	spin_lock_irq(&bp->phy_lock);
+	spin_lock_bh(&bp->phy_lock);
 
 	bnx2_setup_phy(bp);
 
-	spin_unlock_irq(&bp->phy_lock);
+	spin_unlock_bh(&bp->phy_lock);
 
 	return 0;
 }
@@ -4698,7 +4706,7 @@ bnx2_set_rx_csum(struct net_device *dev, u32 data)
 
 #define BNX2_NUM_STATS 45
 
-struct {
+static struct {
 	char string[ETH_GSTRING_LEN];
 } bnx2_stats_str_arr[BNX2_NUM_STATS] = {
 	{ "rx_bytes" },
@@ -4750,7 +4758,7 @@ struct {
 
 #define STATS_OFFSET32(offset_name) (offsetof(struct statistics_block, offset_name) / 4)
 
-unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
+static unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
     STATS_OFFSET32(stat_IfHCInOctets_hi),
     STATS_OFFSET32(stat_IfHCInBadOctets_hi),
     STATS_OFFSET32(stat_IfHCOutOctets_hi),
@@ -4801,7 +4809,7 @@ unsigned long bnx2_stats_offset_arr[BNX2_NUM_STATS] = {
 /* stat_IfHCInBadOctets and stat_Dot3StatsCarrierSenseErrors are
  * skipped because of errata.
  */               
-u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
+static u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
 	8,0,8,8,8,8,8,8,8,8,
 	4,0,4,4,4,4,4,4,4,4,
 	4,4,4,4,4,4,4,4,4,4,
@@ -4811,7 +4819,7 @@ u8 bnx2_5706_stats_len_arr[BNX2_NUM_STATS] = {
 
 #define BNX2_NUM_TESTS 6
 
-struct {
+static struct {
 	char string[ETH_GSTRING_LEN];
 } bnx2_tests_str_arr[BNX2_NUM_TESTS] = {
 	{ "register_test (offline)" },
@@ -4910,7 +4918,7 @@ bnx2_get_ethtool_stats(struct net_device *dev,
 	struct bnx2 *bp = dev->priv;
 	int i;
 	u32 *hw_stats = (u32 *) bp->stats_blk;
-	u8 *stats_len_arr = 0;
+	u8 *stats_len_arr = NULL;
 
 	if (hw_stats == NULL) {
 		memset(buf, 0, sizeof(u64) * BNX2_NUM_STATS);
@@ -5012,7 +5020,7 @@ static struct ethtool_ops bnx2_ethtool_ops = {
 static int
 bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 {
-	struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
+	struct mii_ioctl_data *data = if_mii(ifr);
 	struct bnx2 *bp = dev->priv;
 	int err;
 
@@ -5024,9 +5032,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 	case SIOCGMIIREG: {
 		u32 mii_regval;
 
-		spin_lock_irq(&bp->phy_lock);
+		spin_lock_bh(&bp->phy_lock);
 		err = bnx2_read_phy(bp, data->reg_num & 0x1f, &mii_regval);
-		spin_unlock_irq(&bp->phy_lock);
+		spin_unlock_bh(&bp->phy_lock);
 
 		data->val_out = mii_regval;
 
@@ -5037,9 +5045,9 @@ bnx2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
 		if (!capable(CAP_NET_ADMIN))
 			return -EPERM;
 
-		spin_lock_irq(&bp->phy_lock);
+		spin_lock_bh(&bp->phy_lock);
 		err = bnx2_write_phy(bp, data->reg_num & 0x1f, data->val_in);
-		spin_unlock_irq(&bp->phy_lock);
+		spin_unlock_bh(&bp->phy_lock);
 
 		return err;
 
@@ -5057,6 +5065,9 @@ bnx2_change_mac_addr(struct net_device *dev, void *p)
 	struct sockaddr *addr = p;
 	struct bnx2 *bp = dev->priv;
 
+	if (!is_valid_ether_addr(addr->sa_data))
+		return -EINVAL;
+
 	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	if (netif_running(dev))
 		bnx2_set_mac_addr(bp);
@@ -5305,6 +5316,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->stats_ticks = 1000000 & 0xffff00;
 
 	bp->timer_interval =  HZ;
+	bp->current_interval =  HZ;
 
 	/* Disable WOL support if we are running on a SERDES chip. */
 	if (CHIP_BOND_ID(bp) & CHIP_BOND_ID_SERDES_BIT) {
@@ -5328,6 +5340,15 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 	bp->req_line_speed = 0;
 	if (bp->phy_flags & PHY_SERDES_FLAG) {
 		bp->advertising = ETHTOOL_ALL_FIBRE_SPEED | ADVERTISED_Autoneg;
+
+		reg = REG_RD_IND(bp, HOST_VIEW_SHMEM_BASE +
+				 BNX2_PORT_HW_CFG_CONFIG);
+		reg &= BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK;
+		if (reg == BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G) {
+			bp->autoneg = 0;
+			bp->req_line_speed = bp->line_speed = SPEED_1000;
+			bp->req_duplex = DUPLEX_FULL;
+		}
 	}
 	else {
 		bp->advertising = ETHTOOL_ALL_COPPER_SPEED | ADVERTISED_Autoneg;
@@ -5335,11 +5356,17 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev)
 
 	bp->req_flow_ctrl = FLOW_CTRL_RX | FLOW_CTRL_TX;
 
+	init_timer(&bp->timer);
+	bp->timer.expires = RUN_AT(bp->timer_interval);
+	bp->timer.data = (unsigned long) bp;
+	bp->timer.function = bnx2_timer;
+
 	return 0;
 
 err_out_unmap:
 	if (bp->regview) {
 		iounmap(bp->regview);
+		bp->regview = NULL;
 	}
 
 err_out_release:
@@ -5454,6 +5481,8 @@ bnx2_remove_one(struct pci_dev *pdev)
 	struct net_device *dev = pci_get_drvdata(pdev);
 	struct bnx2 *bp = dev->priv;
 
+	flush_scheduled_work();
+
 	unregister_netdev(dev);
 
 	if (bp->regview)
@@ -5505,12 +5534,12 @@ bnx2_resume(struct pci_dev *pdev)
 }
 
 static struct pci_driver bnx2_pci_driver = {
-	name:		DRV_MODULE_NAME,
-	id_table:	bnx2_pci_tbl,
-	probe:		bnx2_init_one,
-	remove:		__devexit_p(bnx2_remove_one),
-	suspend:	bnx2_suspend,
-	resume:		bnx2_resume,
+	.name		= DRV_MODULE_NAME,
+	.id_table	= bnx2_pci_tbl,
+	.probe		= bnx2_init_one,
+	.remove		= __devexit_p(bnx2_remove_one),
+	.suspend	= bnx2_suspend,
+	.resume		= bnx2_resume,
 };
 
 static int __init bnx2_init(void)
diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h
index 8214a2853d0..9ad3f5740cd 100644
--- a/drivers/net/bnx2.h
+++ b/drivers/net/bnx2.h
@@ -3841,12 +3841,12 @@ struct bnx2 {
 	struct status_block	*status_blk;
 	u32 			last_status_idx;
 
-	atomic_t		tx_avail_bd;
 	struct tx_bd		*tx_desc_ring;
 	struct sw_bd		*tx_buf_ring;
 	u32			tx_prod_bseq;
 	u16			tx_prod;
 	u16			tx_cons;
+	int			tx_ring_size;
 
 #ifdef BCM_VLAN 
 	struct			vlan_group *vlgrp;
@@ -3872,8 +3872,10 @@ struct bnx2 {
 	char			*name;
 
 	int			timer_interval;
+	int			current_interval;
 	struct			timer_list timer;
 	struct work_struct	reset_task;
+	int			in_reset_task;
 
 	/* Used to synchronize phy accesses. */
 	spinlock_t		phy_lock;
@@ -3927,7 +3929,6 @@ struct bnx2 {
 	u16			fw_wr_seq;
 	u16			fw_drv_pulse_wr_seq;
 
-	int			tx_ring_size;
 	dma_addr_t		tx_desc_mapping;
 
 
@@ -3985,7 +3986,7 @@ struct bnx2 {
 #define PHY_LOOPBACK		2
 
 	u8			serdes_an_pending;
-#define SERDES_AN_TIMEOUT	(2 * HZ)
+#define SERDES_AN_TIMEOUT	(HZ / 3)
 
 	u8			mac_addr[8];
 
@@ -4171,6 +4172,9 @@ struct fw_info {
 
 #define BNX2_PORT_HW_CFG_MAC_LOWER		0x00000054
 #define BNX2_PORT_HW_CFG_CONFIG			0x00000058
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_MASK	 0x001f0000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_AN	 0x00000000
+#define BNX2_PORT_HW_CFG_CFG_DFLT_LINK_1G	 0x00030000
 
 #define BNX2_PORT_HW_CFG_IMD_MAC_A_UPPER	0x00000068
 #define BNX2_PORT_HW_CFG_IMD_MAC_A_LOWER	0x0000006c
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a2e8dda5afa..d2f34d5a808 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -2419,22 +2419,19 @@ out:
 	return 0;
 }
 
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype)
+int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev)
 {
 	struct bonding *bond = dev->priv;
 	struct slave *slave = NULL;
 	int ret = NET_RX_DROP;
 
-	if (!(dev->flags & IFF_MASTER)) {
+	if (!(dev->flags & IFF_MASTER))
 		goto out;
-	}
 
 	read_lock(&bond->lock);
-	slave = bond_get_slave_by_dev((struct bonding *)dev->priv,
-				      skb->real_dev);
-	if (slave == NULL) {
+	slave = bond_get_slave_by_dev((struct bonding *)dev->priv, orig_dev);
+	if (!slave)
 		goto out_unlock;
-	}
 
 	bond_3ad_rx_indication((struct lacpdu *) skb->data, slave, skb->len);
 
diff --git a/drivers/net/bonding/bond_3ad.h b/drivers/net/bonding/bond_3ad.h
index f4682389418..673a30af566 100644
--- a/drivers/net/bonding/bond_3ad.h
+++ b/drivers/net/bonding/bond_3ad.h
@@ -295,6 +295,6 @@ void bond_3ad_adapter_duplex_changed(struct slave *slave);
 void bond_3ad_handle_link_change(struct slave *slave, char link);
 int  bond_3ad_get_active_agg_info(struct bonding *bond, struct ad_info *ad_info);
 int bond_3ad_xmit_xor(struct sk_buff *skb, struct net_device *dev);
-int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype);
+int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct packet_type* ptype, struct net_device *orig_dev);
 #endif //__BOND_3AD_H__
 
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 5ce606d9dc0..f8fce396119 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -354,15 +354,14 @@ static void rlb_update_entry_from_arp(struct bonding *bond, struct arp_pkt *arp)
 	_unlock_rx_hashtbl(bond);
 }
 
-static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype)
+static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct packet_type *ptype, struct net_device *orig_dev)
 {
 	struct bonding *bond = bond_dev->priv;
 	struct arp_pkt *arp = (struct arp_pkt *)skb->data;
 	int res = NET_RX_DROP;
 
-	if (!(bond_dev->flags & IFF_MASTER)) {
+	if (!(bond_dev->flags & IFF_MASTER))
 		goto out;
-	}
 
 	if (!arp) {
 		dprintk("Packet has no ARP data\n");
@@ -1106,18 +1105,13 @@ static int alb_handle_addr_collision_on_attach(struct bonding *bond, struct slav
 			}
 		}
 
-		if (found) {
-			/* a slave was found that is using the mac address
-			 * of the new slave
-			 */
-			printk(KERN_ERR DRV_NAME
-			       ": Error: the hw address of slave %s is not "
-			       "unique - cannot enslave it!",
-			       slave->dev->name);
-			return -EINVAL;
-		}
+		if (!found)
+			return 0;
 
-		return 0;
+		/* Try setting slave mac to bond address and fall-through
+		   to code handling that situation below... */
+		alb_set_slave_mac_addr(slave, bond->dev->dev_addr,
+				       bond->alb_info.rlb_enabled);
 	}
 
 	/* The slave's address is equal to the address of the bond.
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 2c930da90a8..94c9f68dd16 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -1604,6 +1604,44 @@ static int bond_sethwaddr(struct net_device *bond_dev, struct net_device *slave_
 	return 0;
 }
 
+#define BOND_INTERSECT_FEATURES \
+	(NETIF_F_SG|NETIF_F_IP_CSUM|NETIF_F_NO_CSUM|NETIF_F_HW_CSUM)
+
+/* 
+ * Compute the features available to the bonding device by 
+ * intersection of all of the slave devices' BOND_INTERSECT_FEATURES.
+ * Call this after attaching or detaching a slave to update the 
+ * bond's features.
+ */
+static int bond_compute_features(struct bonding *bond)
+{
+	int i;
+	struct slave *slave;
+	struct net_device *bond_dev = bond->dev;
+	int features = bond->bond_features;
+
+	bond_for_each_slave(bond, slave, i) {
+		struct net_device * slave_dev = slave->dev;
+		if (i == 0) {
+			features |= BOND_INTERSECT_FEATURES;
+		}
+		features &=
+			~(~slave_dev->features & BOND_INTERSECT_FEATURES);
+	}
+
+	/* turn off NETIF_F_SG if we need a csum and h/w can't do it */
+	if ((features & NETIF_F_SG) && 
+		!(features & (NETIF_F_IP_CSUM |
+			      NETIF_F_NO_CSUM |
+			      NETIF_F_HW_CSUM))) {
+		features &= ~NETIF_F_SG;
+	}
+
+	bond_dev->features = features;
+
+	return 0;
+}
+
 /* enslave device <slave> to bond device <master> */
 static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev)
 {
@@ -1811,6 +1849,8 @@ static int bond_enslave(struct net_device *bond_dev, struct net_device *slave_de
 	new_slave->delay = 0;
 	new_slave->link_failure_count = 0;
 
+	bond_compute_features(bond);
+
 	if (bond->params.miimon && !bond->params.use_carrier) {
 		link_reporting = bond_check_dev_link(bond, slave_dev, 1);
 
@@ -2015,7 +2055,7 @@ err_free:
 
 err_undo_flags:
 	bond_dev->features = old_features;
-
+ 
 	return res;
 }
 
@@ -2100,6 +2140,8 @@ static int bond_release(struct net_device *bond_dev, struct net_device *slave_de
 	/* release the slave from its bond */
 	bond_detach_slave(bond, slave);
 
+	bond_compute_features(bond);
+
 	if (bond->primary_slave == slave) {
 		bond->primary_slave = NULL;
 	}
@@ -2243,6 +2285,8 @@ static int bond_release_all(struct net_device *bond_dev)
 			bond_alb_deinit_slave(bond, slave);
 		}
 
+		bond_compute_features(bond);
+
 		/* now that the slave is detached, unlock and perform
 		 * all the undo steps that should not be called from
 		 * within a lock.
@@ -3588,6 +3632,7 @@ static int bond_master_netdev_event(unsigned long event, struct net_device *bond
 static int bond_slave_netdev_event(unsigned long event, struct net_device *slave_dev)
 {
 	struct net_device *bond_dev = slave_dev->master;
+	struct bonding *bond = bond_dev->priv;
 
 	switch (event) {
 	case NETDEV_UNREGISTER:
@@ -3626,6 +3671,9 @@ static int bond_slave_netdev_event(unsigned long event, struct net_device *slave
 		 * TODO: handle changing the primary's name
 		 */
 		break;
+	case NETDEV_FEAT_CHANGE:
+		bond_compute_features(bond);
+		break;
 	default:
 		break;
 	}
@@ -4526,6 +4574,11 @@ static inline void bond_set_mode_ops(struct bonding *bond, int mode)
 	}
 }
 
+static struct ethtool_ops bond_ethtool_ops = {
+	.get_tx_csum		= ethtool_op_get_tx_csum,
+	.get_sg			= ethtool_op_get_sg,
+};
+
 /*
  * Does not allocate but creates a /proc entry.
  * Allowed to fail.
@@ -4555,6 +4608,7 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
 	bond_dev->stop = bond_close;
 	bond_dev->get_stats = bond_get_stats;
 	bond_dev->do_ioctl = bond_do_ioctl;
+	bond_dev->ethtool_ops = &bond_ethtool_ops;
 	bond_dev->set_multicast_list = bond_set_multicast_list;
 	bond_dev->change_mtu = bond_change_mtu;
 	bond_dev->set_mac_address = bond_set_mac_address;
@@ -4591,6 +4645,8 @@ static int __init bond_init(struct net_device *bond_dev, struct bond_params *par
 			       NETIF_F_HW_VLAN_RX |
 			       NETIF_F_HW_VLAN_FILTER);
 
+	bond->bond_features = bond_dev->features;
+
 #ifdef CONFIG_PROC_FS
 	bond_create_proc_entry(bond);
 #endif
diff --git a/drivers/net/bonding/bonding.h b/drivers/net/bonding/bonding.h
index d27f377b3ee..38819698086 100644
--- a/drivers/net/bonding/bonding.h
+++ b/drivers/net/bonding/bonding.h
@@ -211,6 +211,9 @@ struct bonding {
 	struct   bond_params params;
 	struct   list_head vlan_list;
 	struct   vlan_group *vlgrp;
+	/* the features the bonding device supports, independently 
+	 * of any slaves */
+	int	 bond_features; 
 };
 
 /**
diff --git a/drivers/net/chelsio/Makefile b/drivers/net/chelsio/Makefile
new file mode 100644
index 00000000000..91e927827c4
--- /dev/null
+++ b/drivers/net/chelsio/Makefile
@@ -0,0 +1,11 @@
+#
+# Chelsio 10Gb NIC driver for Linux.
+#
+
+obj-$(CONFIG_CHELSIO_T1) += cxgb.o
+
+EXTRA_CFLAGS += -I$(TOPDIR)/drivers/net/chelsio $(DEBUG_FLAGS)
+
+
+cxgb-objs := cxgb2.o espi.o pm3393.o sge.o subr.o mv88x201x.o
+
diff --git a/drivers/net/chelsio/common.h b/drivers/net/chelsio/common.h
new file mode 100644
index 00000000000..f09348802b4
--- /dev/null
+++ b/drivers/net/chelsio/common.h
@@ -0,0 +1,314 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: common.h                                                            *
+ * $Revision: 1.21 $                                                         *
+ * $Date: 2005/06/22 00:43:25 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_COMMON_H_
+#define _CXGB_COMMON_H_
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include <linux/crc32.h>
+#include <linux/init.h>
+#include <asm/io.h>
+#include <linux/pci_ids.h>
+
+#define DRV_DESCRIPTION "Chelsio 10Gb Ethernet Driver"
+#define DRV_NAME "cxgb"
+#define DRV_VERSION "2.1.1"
+#define PFX      DRV_NAME ": "
+
+#define CH_ERR(fmt, ...)   printk(KERN_ERR PFX fmt, ## __VA_ARGS__)
+#define CH_WARN(fmt, ...)  printk(KERN_WARNING PFX fmt, ## __VA_ARGS__)
+#define CH_ALERT(fmt, ...) printk(KERN_ALERT PFX fmt, ## __VA_ARGS__)
+
+#define CH_DEVICE(devid, ssid, idx) \
+	{ PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
+
+#define SUPPORTED_PAUSE       (1 << 13)
+#define SUPPORTED_LOOPBACK    (1 << 15)
+
+#define ADVERTISED_PAUSE      (1 << 13)
+#define ADVERTISED_ASYM_PAUSE (1 << 14)
+
+typedef struct adapter adapter_t;
+
+void t1_elmer0_ext_intr(adapter_t *adapter);
+void t1_link_changed(adapter_t *adapter, int port_id, int link_status,
+			int speed, int duplex, int fc);
+
+struct t1_rx_mode {
+	struct net_device *dev;
+	u32 idx;
+	struct dev_mc_list *list;
+};
+
+#define t1_rx_mode_promisc(rm)	(rm->dev->flags & IFF_PROMISC)
+#define t1_rx_mode_allmulti(rm)	(rm->dev->flags & IFF_ALLMULTI)
+#define t1_rx_mode_mc_cnt(rm)	(rm->dev->mc_count)
+
+static inline u8 *t1_get_next_mcaddr(struct t1_rx_mode *rm)
+{
+	u8 *addr = 0;
+
+	if (rm->idx++ < rm->dev->mc_count) {
+		addr = rm->list->dmi_addr;
+		rm->list = rm->list->next;
+	}
+	return addr;
+}
+
+#define	MAX_NPORTS 4
+
+#define SPEED_INVALID 0xffff
+#define DUPLEX_INVALID 0xff
+
+enum {
+	CHBT_BOARD_N110,
+	CHBT_BOARD_N210
+};
+
+enum {
+	CHBT_TERM_T1,
+	CHBT_TERM_T2
+};
+
+enum {
+	CHBT_MAC_PM3393,
+};
+
+enum {
+	CHBT_PHY_88X2010,
+};
+
+enum {
+	PAUSE_RX      = 1 << 0,
+	PAUSE_TX      = 1 << 1,
+	PAUSE_AUTONEG = 1 << 2
+};
+
+/* Revisions of T1 chip */
+enum {
+	TERM_T1A   = 0,
+	TERM_T1B   = 1,
+	TERM_T2    = 3
+};
+
+struct sge_params {
+	unsigned int cmdQ_size[2];
+	unsigned int freelQ_size[2];
+	unsigned int large_buf_capacity;
+	unsigned int rx_coalesce_usecs;
+	unsigned int last_rx_coalesce_raw;
+	unsigned int default_rx_coalesce_usecs;
+	unsigned int sample_interval_usecs;
+	unsigned int coalesce_enable;
+	unsigned int polling;
+};
+
+struct chelsio_pci_params {
+	unsigned short speed;
+	unsigned char  width;
+	unsigned char  is_pcix;
+};
+
+struct adapter_params {
+	struct sge_params sge;
+	struct chelsio_pci_params pci;
+
+	const struct board_info *brd_info;
+
+	unsigned int   nports;          /* # of ethernet ports */
+	unsigned int   stats_update_period;
+	unsigned short chip_revision;
+	unsigned char  chip_version;
+};
+
+struct link_config {
+	unsigned int   supported;        /* link capabilities */
+	unsigned int   advertising;      /* advertised capabilities */
+	unsigned short requested_speed;  /* speed user has requested */
+	unsigned short speed;            /* actual link speed */
+	unsigned char  requested_duplex; /* duplex user has requested */
+	unsigned char  duplex;           /* actual link duplex */
+	unsigned char  requested_fc;     /* flow control user has requested */
+	unsigned char  fc;               /* actual link flow control */
+	unsigned char  autoneg;          /* autonegotiating? */
+};
+
+struct cmac;
+struct cphy;
+
+struct port_info {
+	struct net_device *dev;
+	struct cmac *mac;
+	struct cphy *phy;
+	struct link_config link_config;
+	struct net_device_stats netstats;
+};
+
+struct sge;
+struct peespi;
+
+struct adapter {
+	u8 *regs;
+	struct pci_dev *pdev;
+	unsigned long registered_device_map;
+	unsigned long open_device_map;
+	unsigned long flags;
+
+	const char *name;
+	int msg_enable;
+	u32 mmio_len;
+
+	struct work_struct ext_intr_handler_task;
+	struct adapter_params params;
+
+	struct vlan_group *vlan_grp;
+
+	/* Terminator modules. */
+	struct sge    *sge;
+	struct peespi *espi;
+
+	struct port_info port[MAX_NPORTS];
+	struct work_struct stats_update_task;
+	struct timer_list stats_update_timer;
+
+	struct semaphore mib_mutex;
+	spinlock_t tpi_lock;
+	spinlock_t work_lock;
+	/* guards async operations */
+	spinlock_t async_lock ____cacheline_aligned;
+	u32 slow_intr_mask;
+};
+
+enum {                                           /* adapter flags */
+	FULL_INIT_DONE        = 1 << 0,
+	TSO_CAPABLE           = 1 << 2,
+	TCP_CSUM_CAPABLE      = 1 << 3,
+	UDP_CSUM_CAPABLE      = 1 << 4,
+	VLAN_ACCEL_CAPABLE    = 1 << 5,
+	RX_CSUM_ENABLED       = 1 << 6,
+};
+
+struct mdio_ops;
+struct gmac;
+struct gphy;
+
+struct board_info {
+	unsigned char           board;
+	unsigned char           port_number;
+	unsigned long           caps;
+	unsigned char           chip_term;
+	unsigned char           chip_mac;
+	unsigned char           chip_phy;
+	unsigned int            clock_core;
+	unsigned int            clock_mc3;
+	unsigned int            clock_mc4;
+	unsigned int            espi_nports;
+	unsigned int            clock_cspi;
+	unsigned int            clock_elmer0;
+	unsigned char           mdio_mdien;
+	unsigned char           mdio_mdiinv;
+	unsigned char           mdio_mdc;
+	unsigned char           mdio_phybaseaddr;
+	struct gmac            *gmac;
+	struct gphy            *gphy;
+	struct mdio_ops	       *mdio_ops;
+	const char             *desc;
+};
+
+extern struct pci_device_id t1_pci_tbl[];
+
+static inline int adapter_matches_type(const adapter_t *adapter,
+				       int version, int revision)
+{
+	return adapter->params.chip_version == version &&
+	       adapter->params.chip_revision == revision;
+}
+
+#define t1_is_T1B(adap) adapter_matches_type(adap, CHBT_TERM_T1, TERM_T1B)
+#define is_T2(adap)     adapter_matches_type(adap, CHBT_TERM_T2, TERM_T2)
+
+/* Returns true if an adapter supports VLAN acceleration and TSO */
+static inline int vlan_tso_capable(const adapter_t *adapter)
+{
+	return !t1_is_T1B(adapter);
+}
+
+#define for_each_port(adapter, iter) \
+	for (iter = 0; iter < (adapter)->params.nports; ++iter)
+
+#define board_info(adapter) ((adapter)->params.brd_info)
+#define is_10G(adapter) (board_info(adapter)->caps & SUPPORTED_10000baseT_Full)
+
+static inline unsigned int core_ticks_per_usec(const adapter_t *adap)
+{
+	return board_info(adap)->clock_core / 1000000;
+}
+
+extern int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value);
+extern int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *value);
+
+extern void t1_interrupts_enable(adapter_t *adapter);
+extern void t1_interrupts_disable(adapter_t *adapter);
+extern void t1_interrupts_clear(adapter_t *adapter);
+extern int elmer0_ext_intr_handler(adapter_t *adapter);
+extern int t1_slow_intr_handler(adapter_t *adapter);
+
+extern int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
+extern const struct board_info *t1_get_board_info(unsigned int board_id);
+extern const struct board_info *t1_get_board_info_from_ids(unsigned int devid,
+						    unsigned short ssid);
+extern int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data);
+extern int t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
+		     struct adapter_params *p);
+extern int t1_init_hw_modules(adapter_t *adapter);
+extern int t1_init_sw_modules(adapter_t *adapter, const struct board_info *bi);
+extern void t1_free_sw_modules(adapter_t *adapter);
+extern void t1_fatal_err(adapter_t *adapter);
+
+extern void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable);
+extern void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable);
+
+#endif /* _CXGB_COMMON_H_ */
diff --git a/drivers/net/chelsio/cphy.h b/drivers/net/chelsio/cphy.h
new file mode 100644
index 00000000000..3412342f734
--- /dev/null
+++ b/drivers/net/chelsio/cphy.h
@@ -0,0 +1,148 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: cphy.h                                                              *
+ * $Revision: 1.7 $                                                          *
+ * $Date: 2005/06/21 18:29:47 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_CPHY_H_
+#define _CXGB_CPHY_H_
+
+#include "common.h"
+
+struct mdio_ops {
+	void (*init)(adapter_t *adapter, const struct board_info *bi);
+	int  (*read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+		     int reg_addr, unsigned int *val);
+	int  (*write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+		      int reg_addr, unsigned int val);
+};
+
+/* PHY interrupt types */
+enum {
+	cphy_cause_link_change = 0x1,
+	cphy_cause_error = 0x2
+};
+
+struct cphy;
+
+/* PHY operations */
+struct cphy_ops {
+	void (*destroy)(struct cphy *);
+	int (*reset)(struct cphy *, int wait);
+
+	int (*interrupt_enable)(struct cphy *);
+	int (*interrupt_disable)(struct cphy *);
+	int (*interrupt_clear)(struct cphy *);
+	int (*interrupt_handler)(struct cphy *);
+
+	int (*autoneg_enable)(struct cphy *);
+	int (*autoneg_disable)(struct cphy *);
+	int (*autoneg_restart)(struct cphy *);
+
+	int (*advertise)(struct cphy *phy, unsigned int advertise_map);
+	int (*set_loopback)(struct cphy *, int on);
+	int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
+	int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
+			       int *duplex, int *fc);
+};
+
+/* A PHY instance */
+struct cphy {
+	int addr;                            /* PHY address */
+	adapter_t *adapter;                  /* associated adapter */
+	struct cphy_ops *ops;                /* PHY operations */
+	int (*mdio_read)(adapter_t *adapter, int phy_addr, int mmd_addr,
+			 int reg_addr, unsigned int *val);
+	int (*mdio_write)(adapter_t *adapter, int phy_addr, int mmd_addr,
+			  int reg_addr, unsigned int val);
+	struct cphy_instance *instance;
+};
+
+/* Convenience MDIO read/write wrappers */
+static inline int mdio_read(struct cphy *cphy, int mmd, int reg,
+			    unsigned int *valp)
+{
+	return cphy->mdio_read(cphy->adapter, cphy->addr, mmd, reg, valp);
+}
+
+static inline int mdio_write(struct cphy *cphy, int mmd, int reg,
+			     unsigned int val)
+{
+	return cphy->mdio_write(cphy->adapter, cphy->addr, mmd, reg, val);
+}
+
+static inline int simple_mdio_read(struct cphy *cphy, int reg,
+				   unsigned int *valp)
+{
+	return mdio_read(cphy, 0, reg, valp);
+}
+
+static inline int simple_mdio_write(struct cphy *cphy, int reg,
+				    unsigned int val)
+{
+	return mdio_write(cphy, 0, reg, val);
+}
+
+/* Convenience initializer */
+static inline void cphy_init(struct cphy *phy, adapter_t *adapter,
+			     int phy_addr, struct cphy_ops *phy_ops,
+			     struct mdio_ops *mdio_ops)
+{
+	phy->adapter = adapter;
+	phy->addr    = phy_addr;
+	phy->ops     = phy_ops;
+	if (mdio_ops) {
+		phy->mdio_read  = mdio_ops->read;
+		phy->mdio_write = mdio_ops->write;
+	}
+}
+
+/* Operations of the PHY-instance factory */
+struct gphy {
+	/* Construct a PHY instance with the given PHY address */
+	struct cphy *(*create)(adapter_t *adapter, int phy_addr,
+			       struct mdio_ops *mdio_ops);
+
+	/*
+	 * Reset the PHY chip.  This resets the whole PHY chip, not individual
+	 * ports.
+	 */
+	int (*reset)(adapter_t *adapter);
+};
+
+extern struct gphy t1_mv88x201x_ops;
+extern struct gphy t1_dummy_phy_ops;
+
+#endif /* _CXGB_CPHY_H_ */
diff --git a/drivers/net/chelsio/cpl5_cmd.h b/drivers/net/chelsio/cpl5_cmd.h
new file mode 100644
index 00000000000..27925e487bc
--- /dev/null
+++ b/drivers/net/chelsio/cpl5_cmd.h
@@ -0,0 +1,145 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: cpl5_cmd.h                                                          *
+ * $Revision: 1.6 $                                                          *
+ * $Date: 2005/06/21 18:29:47 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_CPL5_CMD_H_
+#define _CXGB_CPL5_CMD_H_
+
+#include <asm/byteorder.h>
+
+#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD)
+#error "Adjust your <asm/byteorder.h> defines"
+#endif
+
+enum CPL_opcode {
+	CPL_RX_PKT            = 0xAD,
+	CPL_TX_PKT            = 0xB2,
+	CPL_TX_PKT_LSO        = 0xB6,
+};
+
+enum {                /* TX_PKT_LSO ethernet types */
+	CPL_ETH_II,
+	CPL_ETH_II_VLAN,
+	CPL_ETH_802_3,
+	CPL_ETH_802_3_VLAN
+};
+
+struct cpl_rx_data {
+	u32 rsvd0;
+	u32 len;
+	u32 seq;
+	u16 urg;
+	u8  rsvd1;
+	u8  status;
+};
+
+/*
+ * We want this header's alignment to be no more stringent than 2-byte aligned.
+ * All fields are u8 or u16 except for the length.  However that field is not
+ * used so we break it into 2 16-bit parts to easily meet our alignment needs.
+ */
+struct cpl_tx_pkt {
+	u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 iff:4;
+	u8 ip_csum_dis:1;
+	u8 l4_csum_dis:1;
+	u8 vlan_valid:1;
+	u8 rsvd:1;
+#else
+	u8 rsvd:1;
+	u8 vlan_valid:1;
+	u8 l4_csum_dis:1;
+	u8 ip_csum_dis:1;
+	u8 iff:4;
+#endif
+	u16 vlan;
+	u16 len_hi;
+	u16 len_lo;
+};
+
+struct cpl_tx_pkt_lso {
+	u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 iff:4;
+	u8 ip_csum_dis:1;
+	u8 l4_csum_dis:1;
+	u8 vlan_valid:1;
+	u8 rsvd:1;
+#else
+	u8 rsvd:1;
+	u8 vlan_valid:1;
+	u8 l4_csum_dis:1;
+	u8 ip_csum_dis:1;
+	u8 iff:4;
+#endif
+	u16 vlan;
+	u32 len;
+
+	u32 rsvd2;
+	u8 rsvd3;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 tcp_hdr_words:4;
+	u8 ip_hdr_words:4;
+#else
+	u8 ip_hdr_words:4;
+	u8 tcp_hdr_words:4;
+#endif
+	u16 eth_type_mss;
+};
+
+struct cpl_rx_pkt {
+	u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+	u8 iff:4;
+	u8 csum_valid:1;
+	u8 bad_pkt:1;
+	u8 vlan_valid:1;
+	u8 rsvd:1;
+#else
+	u8 rsvd:1;
+	u8 vlan_valid:1;
+	u8 bad_pkt:1;
+	u8 csum_valid:1;
+	u8 iff:4;
+#endif
+	u16 csum;
+	u16 vlan;
+	u16 len;
+};
+
+#endif /* _CXGB_CPL5_CMD_H_ */
diff --git a/drivers/net/chelsio/cxgb2.c b/drivers/net/chelsio/cxgb2.c
new file mode 100644
index 00000000000..28ae478b386
--- /dev/null
+++ b/drivers/net/chelsio/cxgb2.c
@@ -0,0 +1,1256 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: cxgb2.c                                                             *
+ * $Revision: 1.25 $                                                         *
+ * $Date: 2005/06/22 00:43:25 $                                              *
+ * Description:                                                              *
+ *  Chelsio 10Gb Ethernet Driver.                                            *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "common.h"
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/mii.h>
+#include <linux/sockios.h>
+#include <linux/proc_fs.h>
+#include <linux/dma-mapping.h>
+#include <asm/uaccess.h>
+
+#include "cpl5_cmd.h"
+#include "regs.h"
+#include "gmac.h"
+#include "cphy.h"
+#include "sge.h"
+#include "espi.h"
+
+#ifdef work_struct
+#include <linux/tqueue.h>
+#define INIT_WORK INIT_TQUEUE
+#define schedule_work schedule_task
+#define flush_scheduled_work flush_scheduled_tasks
+
+static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
+{
+	mod_timer(&ap->stats_update_timer, jiffies + secs * HZ);
+}
+
+static inline void cancel_mac_stats_update(struct adapter *ap)
+{
+	del_timer_sync(&ap->stats_update_timer);
+	flush_scheduled_tasks();
+}
+
+/*
+ * Stats update timer for 2.4.  It schedules a task to do the actual update as
+ * we need to access MAC statistics in process context.
+ */
+static void mac_stats_timer(unsigned long data)
+{
+	struct adapter *ap = (struct adapter *)data;
+
+	schedule_task(&ap->stats_update_task);
+}
+#else
+#include <linux/workqueue.h>
+
+static inline void schedule_mac_stats_update(struct adapter *ap, int secs)
+{
+	schedule_delayed_work(&ap->stats_update_task, secs * HZ);
+}
+
+static inline void cancel_mac_stats_update(struct adapter *ap)
+{
+	cancel_delayed_work(&ap->stats_update_task);
+}
+#endif
+
+#define MAX_CMDQ_ENTRIES 16384
+#define MAX_CMDQ1_ENTRIES 1024
+#define MAX_RX_BUFFERS 16384
+#define MAX_RX_JUMBO_BUFFERS 16384
+#define MAX_TX_BUFFERS_HIGH	16384U
+#define MAX_TX_BUFFERS_LOW	1536U
+#define MIN_FL_ENTRIES 32
+
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+			 NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+			 NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+/*
+ * The EEPROM is actually bigger but only the first few bytes are used so we
+ * only report those.
+ */
+#define EEPROM_SIZE 32
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("GPL");
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+MODULE_PARM(dflt_msg_enable, "i");
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T1 message enable bitmap");
+
+
+static const char pci_speed[][4] = {
+	"33", "66", "100", "133"
+};
+
+/*
+ * Setup MAC to receive the types of packets we want.
+ */
+static void t1_set_rxmode(struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+	struct cmac *mac = adapter->port[dev->if_port].mac;
+	struct t1_rx_mode rm;
+
+	rm.dev = dev;
+	rm.idx = 0;
+	rm.list = dev->mc_list;
+	mac->ops->set_rx_mode(mac, &rm);
+}
+
+static void link_report(struct port_info *p)
+{
+	if (!netif_carrier_ok(p->dev))
+        	printk(KERN_INFO "%s: link down\n", p->dev->name);
+	else {
+		const char *s = "10Mbps";
+
+		switch (p->link_config.speed) {
+			case SPEED_10000: s = "10Gbps"; break;
+			case SPEED_1000:  s = "1000Mbps"; break;
+			case SPEED_100:   s = "100Mbps"; break;
+		}
+
+        printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
+		       p->dev->name, s,
+		       p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
+	}
+}
+
+void t1_link_changed(struct adapter *adapter, int port_id, int link_stat,
+			int speed, int duplex, int pause)
+{
+	struct port_info *p = &adapter->port[port_id];
+
+	if (link_stat != netif_carrier_ok(p->dev)) {
+		if (link_stat)
+			netif_carrier_on(p->dev);
+		else
+			netif_carrier_off(p->dev);
+		link_report(p);
+
+	}
+}
+
+static void link_start(struct port_info *p)
+{
+	struct cmac *mac = p->mac;
+
+	mac->ops->reset(mac);
+	if (mac->ops->macaddress_set)
+		mac->ops->macaddress_set(mac, p->dev->dev_addr);
+	t1_set_rxmode(p->dev);
+	t1_link_start(p->phy, mac, &p->link_config);
+	mac->ops->enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+}
+
+static void enable_hw_csum(struct adapter *adapter)
+{
+	if (adapter->flags & TSO_CAPABLE)
+		t1_tp_set_ip_checksum_offload(adapter, 1); /* for TSO only */
+	t1_tp_set_tcp_checksum_offload(adapter, 1);
+}
+
+/*
+ * Things to do upon first use of a card.
+ * This must run with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adapter)
+{
+	int err = 0;
+
+	if (!(adapter->flags & FULL_INIT_DONE)) {
+		err = t1_init_hw_modules(adapter);
+		if (err)
+			goto out_err;
+
+		enable_hw_csum(adapter);
+		adapter->flags |= FULL_INIT_DONE;
+	}
+
+	t1_interrupts_clear(adapter);
+	if ((err = request_irq(adapter->pdev->irq,
+			       t1_select_intr_handler(adapter), SA_SHIRQ,
+			       adapter->name, adapter))) {
+		goto out_err;
+	}
+	t1_sge_start(adapter->sge);
+	t1_interrupts_enable(adapter);
+ out_err:
+	return err;
+}
+
+/*
+ * Release resources when all the ports have been stopped.
+ */
+static void cxgb_down(struct adapter *adapter)
+{
+	t1_sge_stop(adapter->sge);
+	t1_interrupts_disable(adapter);
+	free_irq(adapter->pdev->irq, adapter);
+}
+
+static int cxgb_open(struct net_device *dev)
+{
+	int err;
+	struct adapter *adapter = dev->priv;
+	int other_ports = adapter->open_device_map & PORT_MASK;
+
+	if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
+		return err;
+
+	__set_bit(dev->if_port, &adapter->open_device_map);
+	link_start(&adapter->port[dev->if_port]);
+	netif_start_queue(dev);
+	if (!other_ports && adapter->params.stats_update_period)
+		schedule_mac_stats_update(adapter,
+					  adapter->params.stats_update_period);
+	return 0;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+	struct cmac *mac = p->mac;
+
+	netif_stop_queue(dev);
+	mac->ops->disable(mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX);
+	netif_carrier_off(dev);
+
+	clear_bit(dev->if_port, &adapter->open_device_map);
+	if (adapter->params.stats_update_period &&
+	    !(adapter->open_device_map & PORT_MASK)) {
+		/* Stop statistics accumulation. */
+		smp_mb__after_clear_bit();
+		spin_lock(&adapter->work_lock);   /* sync with update task */
+		spin_unlock(&adapter->work_lock);
+		cancel_mac_stats_update(adapter);
+	}
+
+	if (!adapter->open_device_map)
+		cxgb_down(adapter);
+	return 0;
+}
+
+static struct net_device_stats *t1_get_stats(struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+	struct net_device_stats *ns = &p->netstats;
+	const struct cmac_statistics *pstats;
+
+	/* Do a full update of the MAC stats */
+	pstats = p->mac->ops->statistics_update(p->mac,
+						      MAC_STATS_UPDATE_FULL);
+
+	ns->tx_packets = pstats->TxUnicastFramesOK +
+		pstats->TxMulticastFramesOK + pstats->TxBroadcastFramesOK;
+
+	ns->rx_packets = pstats->RxUnicastFramesOK +
+		pstats->RxMulticastFramesOK + pstats->RxBroadcastFramesOK;
+
+	ns->tx_bytes = pstats->TxOctetsOK;
+	ns->rx_bytes = pstats->RxOctetsOK;
+
+	ns->tx_errors = pstats->TxLateCollisions + pstats->TxLengthErrors +
+		pstats->TxUnderrun + pstats->TxFramesAbortedDueToXSCollisions;
+	ns->rx_errors = pstats->RxDataErrors + pstats->RxJabberErrors +
+		pstats->RxFCSErrors + pstats->RxAlignErrors +
+		pstats->RxSequenceErrors + pstats->RxFrameTooLongErrors +
+		pstats->RxSymbolErrors + pstats->RxRuntErrors;
+
+	ns->multicast  = pstats->RxMulticastFramesOK;
+	ns->collisions = pstats->TxTotalCollisions;
+
+	/* detailed rx_errors */
+	ns->rx_length_errors = pstats->RxFrameTooLongErrors +
+		pstats->RxJabberErrors;
+	ns->rx_over_errors   = 0;
+	ns->rx_crc_errors    = pstats->RxFCSErrors;
+	ns->rx_frame_errors  = pstats->RxAlignErrors;
+	ns->rx_fifo_errors   = 0;
+	ns->rx_missed_errors = 0;
+
+	/* detailed tx_errors */
+	ns->tx_aborted_errors   = pstats->TxFramesAbortedDueToXSCollisions;
+	ns->tx_carrier_errors   = 0;
+	ns->tx_fifo_errors      = pstats->TxUnderrun;
+	ns->tx_heartbeat_errors = 0;
+	ns->tx_window_errors    = pstats->TxLateCollisions;
+	return ns;
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+
+	return adapter->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+	struct adapter *adapter = dev->priv;
+
+	adapter->msg_enable = val;
+}
+
+static char stats_strings[][ETH_GSTRING_LEN] = {
+        "TxOctetsOK",
+        "TxOctetsBad",
+        "TxUnicastFramesOK",
+        "TxMulticastFramesOK",
+        "TxBroadcastFramesOK",
+        "TxPauseFrames",
+        "TxFramesWithDeferredXmissions",
+        "TxLateCollisions",
+        "TxTotalCollisions",
+        "TxFramesAbortedDueToXSCollisions",
+        "TxUnderrun",
+        "TxLengthErrors",
+        "TxInternalMACXmitError",
+        "TxFramesWithExcessiveDeferral",
+        "TxFCSErrors",
+
+        "RxOctetsOK",
+        "RxOctetsBad",
+        "RxUnicastFramesOK",
+        "RxMulticastFramesOK",
+        "RxBroadcastFramesOK",
+        "RxPauseFrames",
+        "RxFCSErrors",
+        "RxAlignErrors",
+        "RxSymbolErrors",
+        "RxDataErrors",
+        "RxSequenceErrors",
+        "RxRuntErrors",
+        "RxJabberErrors",
+        "RxInternalMACRcvError",
+        "RxInRangeLengthErrors",
+        "RxOutOfRangeLengthField",
+        "RxFrameTooLongErrors",
+
+	"TSO",
+	"VLANextractions",
+	"VLANinsertions",
+	"RxCsumGood",
+	"TxCsumOffload",
+	"RxDrops"
+
+	"respQ_empty",
+	"respQ_overflow",
+	"freelistQ_empty",
+	"pkt_too_big",
+	"pkt_mismatch",
+	"cmdQ_full0",
+	"cmdQ_full1",
+	"tx_ipfrags",
+	"tx_reg_pkts",
+	"tx_lso_pkts",
+	"tx_do_cksum",
+	
+	"espi_DIP2ParityErr",
+	"espi_DIP4Err",
+	"espi_RxDrops",
+	"espi_TxDrops",
+	"espi_RxOvfl",
+	"espi_ParityErr"
+};
+ 
+#define T2_REGMAP_SIZE (3 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+	return T2_REGMAP_SIZE;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+	struct adapter *adapter = dev->priv;
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->fw_version, "N/A");
+	strcpy(info->bus_info, pci_name(adapter->pdev));
+}
+
+static int get_stats_count(struct net_device *dev)
+{
+	return ARRAY_SIZE(stats_strings);
+}
+
+static void get_strings(struct net_device *dev, u32 stringset, u8 *data)
+{
+	if (stringset == ETH_SS_STATS)
+		memcpy(data, stats_strings, sizeof(stats_strings));
+}
+
+static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
+		      u64 *data)
+{
+	struct adapter *adapter = dev->priv;
+	struct cmac *mac = adapter->port[dev->if_port].mac;
+	const struct cmac_statistics *s;
+	const struct sge_port_stats *ss;
+	const struct sge_intr_counts *t;
+
+	s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL);
+	ss = t1_sge_get_port_stats(adapter->sge, dev->if_port);
+	t = t1_sge_get_intr_counts(adapter->sge);
+
+        *data++ = s->TxOctetsOK;
+        *data++ = s->TxOctetsBad;
+        *data++ = s->TxUnicastFramesOK;
+        *data++ = s->TxMulticastFramesOK;
+        *data++ = s->TxBroadcastFramesOK;
+        *data++ = s->TxPauseFrames;
+        *data++ = s->TxFramesWithDeferredXmissions;
+        *data++ = s->TxLateCollisions;
+        *data++ = s->TxTotalCollisions;
+        *data++ = s->TxFramesAbortedDueToXSCollisions;
+        *data++ = s->TxUnderrun;
+        *data++ = s->TxLengthErrors;
+        *data++ = s->TxInternalMACXmitError;
+        *data++ = s->TxFramesWithExcessiveDeferral;
+        *data++ = s->TxFCSErrors;
+
+        *data++ = s->RxOctetsOK;
+        *data++ = s->RxOctetsBad;
+        *data++ = s->RxUnicastFramesOK;
+        *data++ = s->RxMulticastFramesOK;
+        *data++ = s->RxBroadcastFramesOK;
+        *data++ = s->RxPauseFrames;
+        *data++ = s->RxFCSErrors;
+        *data++ = s->RxAlignErrors;
+        *data++ = s->RxSymbolErrors;
+        *data++ = s->RxDataErrors;
+        *data++ = s->RxSequenceErrors;
+        *data++ = s->RxRuntErrors;
+        *data++ = s->RxJabberErrors;
+        *data++ = s->RxInternalMACRcvError;
+        *data++ = s->RxInRangeLengthErrors;
+        *data++ = s->RxOutOfRangeLengthField;
+        *data++ = s->RxFrameTooLongErrors;
+
+	*data++ = ss->tso;
+	*data++ = ss->vlan_xtract;
+	*data++ = ss->vlan_insert;
+	*data++ = ss->rx_cso_good;
+	*data++ = ss->tx_cso;
+	*data++ = ss->rx_drops;
+
+	*data++ = (u64)t->respQ_empty;
+	*data++ = (u64)t->respQ_overflow;
+	*data++ = (u64)t->freelistQ_empty;
+	*data++ = (u64)t->pkt_too_big;
+	*data++ = (u64)t->pkt_mismatch;
+	*data++ = (u64)t->cmdQ_full[0];
+	*data++ = (u64)t->cmdQ_full[1];
+	*data++ = (u64)t->tx_ipfrags;
+	*data++ = (u64)t->tx_reg_pkts;
+	*data++ = (u64)t->tx_lso_pkts;
+	*data++ = (u64)t->tx_do_cksum;
+}
+
+static inline void reg_block_dump(struct adapter *ap, void *buf,
+				  unsigned int start, unsigned int end)
+{
+	u32 *p = buf + start;
+
+	for ( ; start <= end; start += sizeof(u32))
+		*p++ = readl(ap->regs + start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+		     void *buf)
+{
+	struct adapter *ap = dev->priv;
+
+	/*
+	 * Version scheme: bits 0..9: chip version, bits 10..15: chip revision
+	 */
+	regs->version = 2;
+
+	memset(buf, 0, T2_REGMAP_SIZE);
+	reg_block_dump(ap, buf, 0, A_SG_RESPACCUTIMER);
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+
+	cmd->supported = p->link_config.supported;
+	cmd->advertising = p->link_config.advertising;
+
+	if (netif_carrier_ok(dev)) {
+		cmd->speed = p->link_config.speed;
+		cmd->duplex = p->link_config.duplex;
+	} else {
+		cmd->speed = -1;
+		cmd->duplex = -1;
+	}
+
+        cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+        cmd->phy_address = p->phy->addr;
+        cmd->transceiver = XCVR_EXTERNAL;
+        cmd->autoneg = p->link_config.autoneg;
+        cmd->maxtxpkt = 0;
+        cmd->maxrxpkt = 0;
+	return 0;
+}
+
+static int speed_duplex_to_caps(int speed, int duplex)
+{
+	int cap = 0;
+
+	switch (speed) {
+	case SPEED_10:
+		if (duplex == DUPLEX_FULL)
+			cap = SUPPORTED_10baseT_Full;
+		else
+			cap = SUPPORTED_10baseT_Half;
+		break;
+	case SPEED_100:
+		if (duplex == DUPLEX_FULL)
+			cap = SUPPORTED_100baseT_Full;
+		else
+			cap = SUPPORTED_100baseT_Half;
+		break;
+	case SPEED_1000:
+		if (duplex == DUPLEX_FULL)
+			cap = SUPPORTED_1000baseT_Full;
+		else
+			cap = SUPPORTED_1000baseT_Half;
+		break;
+	case SPEED_10000:
+		if (duplex == DUPLEX_FULL)
+			cap = SUPPORTED_10000baseT_Full;
+	}
+	return cap;
+}
+
+#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
+		      ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+		      ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \
+		      ADVERTISED_10000baseT_Full)
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+	struct link_config *lc = &p->link_config;
+
+	if (!(lc->supported & SUPPORTED_Autoneg))
+		return -EOPNOTSUPP;             /* can't change speed/duplex */
+
+	if (cmd->autoneg == AUTONEG_DISABLE) {
+		int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+
+		if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+			return -EINVAL;
+		lc->requested_speed = cmd->speed;
+		lc->requested_duplex = cmd->duplex;
+		lc->advertising = 0;
+	} else {
+		cmd->advertising &= ADVERTISED_MASK;
+		if (cmd->advertising & (cmd->advertising - 1))
+			cmd->advertising = lc->supported;
+		cmd->advertising &= lc->supported;
+		if (!cmd->advertising)
+			return -EINVAL;
+		lc->requested_speed = SPEED_INVALID;
+		lc->requested_duplex = DUPLEX_INVALID;
+		lc->advertising = cmd->advertising | ADVERTISED_Autoneg;
+	}
+	lc->autoneg = cmd->autoneg;
+	if (netif_running(dev))
+		t1_link_start(p->phy, p->mac, lc);
+	return 0;
+}
+
+static void get_pauseparam(struct net_device *dev,
+			   struct ethtool_pauseparam *epause)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+
+	epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0;
+	epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0;
+	epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0;
+}
+
+static int set_pauseparam(struct net_device *dev,
+			  struct ethtool_pauseparam *epause)
+{
+	struct adapter *adapter = dev->priv;
+	struct port_info *p = &adapter->port[dev->if_port];
+	struct link_config *lc = &p->link_config;
+
+	if (epause->autoneg == AUTONEG_DISABLE)
+		lc->requested_fc = 0;
+	else if (lc->supported & SUPPORTED_Autoneg)
+		lc->requested_fc = PAUSE_AUTONEG;
+	else
+		return -EINVAL;
+
+	if (epause->rx_pause)
+		lc->requested_fc |= PAUSE_RX;
+	if (epause->tx_pause)
+		lc->requested_fc |= PAUSE_TX;
+	if (lc->autoneg == AUTONEG_ENABLE) {
+		if (netif_running(dev))
+			t1_link_start(p->phy, p->mac, lc);
+	} else {
+		lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+		if (netif_running(dev))
+			p->mac->ops->set_speed_duplex_fc(p->mac, -1, -1,
+							 lc->fc);
+	}
+	return 0;
+}
+
+static u32 get_rx_csum(struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+
+	return (adapter->flags & RX_CSUM_ENABLED) != 0;
+}
+
+static int set_rx_csum(struct net_device *dev, u32 data)
+{
+	struct adapter *adapter = dev->priv;
+
+	if (data)
+		adapter->flags |= RX_CSUM_ENABLED;
+	else
+		adapter->flags &= ~RX_CSUM_ENABLED;
+	return 0;
+}
+
+static int set_tso(struct net_device *dev, u32 value)
+{
+	struct adapter *adapter = dev->priv;
+
+	if (!(adapter->flags & TSO_CAPABLE))
+		return value ? -EOPNOTSUPP : 0;
+	return ethtool_op_set_tso(dev, value);
+}
+
+static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+	struct adapter *adapter = dev->priv;
+	int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+	e->rx_max_pending = MAX_RX_BUFFERS;
+	e->rx_mini_max_pending = 0;
+	e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
+	e->tx_max_pending = MAX_CMDQ_ENTRIES;
+
+	e->rx_pending = adapter->params.sge.freelQ_size[!jumbo_fl];
+	e->rx_mini_pending = 0;
+	e->rx_jumbo_pending = adapter->params.sge.freelQ_size[jumbo_fl];
+	e->tx_pending = adapter->params.sge.cmdQ_size[0];
+}
+
+static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+	struct adapter *adapter = dev->priv;
+	int jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+	if (e->rx_pending > MAX_RX_BUFFERS || e->rx_mini_pending ||
+	    e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
+	    e->tx_pending > MAX_CMDQ_ENTRIES ||
+	    e->rx_pending < MIN_FL_ENTRIES ||
+	    e->rx_jumbo_pending < MIN_FL_ENTRIES ||
+	    e->tx_pending < (adapter->params.nports + 1) * (MAX_SKB_FRAGS + 1))
+		return -EINVAL;
+
+	if (adapter->flags & FULL_INIT_DONE)
+        return -EBUSY;
+
+	adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
+	adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
+	adapter->params.sge.cmdQ_size[0] = e->tx_pending;
+	adapter->params.sge.cmdQ_size[1] = e->tx_pending > MAX_CMDQ1_ENTRIES ?
+		MAX_CMDQ1_ENTRIES : e->tx_pending;
+	return 0;
+}
+
+static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+	struct adapter *adapter = dev->priv;
+
+	/*
+	 * If RX coalescing is requested we use NAPI, otherwise interrupts.
+	 * This choice can be made only when all ports and the TOE are off.
+	 */
+	if (adapter->open_device_map == 0)
+		adapter->params.sge.polling = c->use_adaptive_rx_coalesce;
+
+	if (adapter->params.sge.polling) {
+		adapter->params.sge.rx_coalesce_usecs = 0;
+	} else {
+		adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
+	}
+ 	adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
+	adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
+	t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
+	return 0;
+}
+
+static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+	struct adapter *adapter = dev->priv;
+
+	c->rx_coalesce_usecs = adapter->params.sge.rx_coalesce_usecs;
+	c->rate_sample_interval = adapter->params.sge.sample_interval_usecs;
+	c->use_adaptive_rx_coalesce = adapter->params.sge.coalesce_enable;
+	return 0;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+    return EEPROM_SIZE;
+}
+
+#define EEPROM_MAGIC(ap) \
+	(PCI_VENDOR_ID_CHELSIO | ((ap)->params.chip_version << 16))
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
+		      u8 *data)
+{
+	int i;
+	u8 buf[EEPROM_SIZE] __attribute__((aligned(4)));
+	struct adapter *adapter = dev->priv;
+
+	e->magic = EEPROM_MAGIC(adapter);
+	for (i = e->offset & ~3; i < e->offset + e->len; i += sizeof(u32))
+		t1_seeprom_read(adapter, i, (u32 *)&buf[i]);
+	memcpy(data, buf + e->offset, e->len);
+	return 0;
+}
+
+static struct ethtool_ops t1_ethtool_ops = {
+	.get_settings      = get_settings,
+	.set_settings      = set_settings,
+	.get_drvinfo       = get_drvinfo,
+	.get_msglevel      = get_msglevel,
+	.set_msglevel      = set_msglevel,
+	.get_ringparam     = get_sge_param,
+	.set_ringparam     = set_sge_param,
+	.get_coalesce      = get_coalesce,
+	.set_coalesce      = set_coalesce,
+	.get_eeprom_len    = get_eeprom_len,
+	.get_eeprom        = get_eeprom,
+	.get_pauseparam    = get_pauseparam,
+	.set_pauseparam    = set_pauseparam,
+	.get_rx_csum       = get_rx_csum,
+	.set_rx_csum       = set_rx_csum,
+	.get_tx_csum       = ethtool_op_get_tx_csum,
+	.set_tx_csum       = ethtool_op_set_tx_csum,
+	.get_sg            = ethtool_op_get_sg,
+	.set_sg            = ethtool_op_set_sg,
+	.get_link          = ethtool_op_get_link,
+	.get_strings       = get_strings,
+	.get_stats_count   = get_stats_count,
+	.get_ethtool_stats = get_stats,
+	.get_regs_len      = get_regs_len,
+	.get_regs          = get_regs,
+	.get_tso           = ethtool_op_get_tso,
+	.set_tso           = set_tso,
+};
+
+static void cxgb_proc_cleanup(struct adapter *adapter,
+					struct proc_dir_entry *dir)
+{
+	const char *name;
+	name = adapter->name;
+	remove_proc_entry(name, dir);
+}
+//#define chtoe_setup_toedev(adapter) NULL
+#define update_mtu_tab(adapter)
+#define write_smt_entry(adapter, idx)
+
+static int t1_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+        struct adapter *adapter = dev->priv;
+        struct mii_ioctl_data *data = (struct mii_ioctl_data *)&req->ifr_data;
+
+	switch (cmd) {
+        case SIOCGMIIPHY:
+                data->phy_id = adapter->port[dev->if_port].phy->addr;
+                /* FALLTHRU */
+        case SIOCGMIIREG: {
+		struct cphy *phy = adapter->port[dev->if_port].phy;
+		u32 val;
+
+		if (!phy->mdio_read)
+            return -EOPNOTSUPP;
+		phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
+			       &val);
+                data->val_out = val;
+                break;
+	}
+        case SIOCSMIIREG: {
+		struct cphy *phy = adapter->port[dev->if_port].phy;
+
+                if (!capable(CAP_NET_ADMIN))
+                    return -EPERM;
+		if (!phy->mdio_write)
+            return -EOPNOTSUPP;
+		phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
+			        data->val_in);
+                break;
+	}
+
+	default:
+		return -EOPNOTSUPP;
+	}
+	return 0;
+}
+
+static int t1_change_mtu(struct net_device *dev, int new_mtu)
+{
+	int ret;
+	struct adapter *adapter = dev->priv;
+	struct cmac *mac = adapter->port[dev->if_port].mac;
+
+	if (!mac->ops->set_mtu)
+        return -EOPNOTSUPP;
+	if (new_mtu < 68)
+        return -EINVAL;
+	if ((ret = mac->ops->set_mtu(mac, new_mtu)))
+		return ret;
+	dev->mtu = new_mtu;
+	return 0;
+}
+
+static int t1_set_mac_addr(struct net_device *dev, void *p)
+{
+	struct adapter *adapter = dev->priv;
+	struct cmac *mac = adapter->port[dev->if_port].mac;
+	struct sockaddr *addr = p;
+
+	if (!mac->ops->macaddress_set)
+		return -EOPNOTSUPP;
+
+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+	mac->ops->macaddress_set(mac, dev->dev_addr);
+	return 0;
+}
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void vlan_rx_register(struct net_device *dev,
+				   struct vlan_group *grp)
+{
+	struct adapter *adapter = dev->priv;
+
+	spin_lock_irq(&adapter->async_lock);
+	adapter->vlan_grp = grp;
+	t1_set_vlan_accel(adapter, grp != NULL);
+	spin_unlock_irq(&adapter->async_lock);
+}
+
+static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+	struct adapter *adapter = dev->priv;
+
+	spin_lock_irq(&adapter->async_lock);
+	if (adapter->vlan_grp)
+		adapter->vlan_grp->vlan_devices[vid] = NULL;
+	spin_unlock_irq(&adapter->async_lock);
+}
+#endif
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void t1_netpoll(struct net_device *dev)
+{
+	unsigned long flags;
+	struct adapter *adapter = dev->priv;
+
+	local_irq_save(flags);
+        t1_select_intr_handler(adapter)(adapter->pdev->irq, adapter, NULL);
+	local_irq_restore(flags);
+}
+#endif
+
+/*
+ * Periodic accumulation of MAC statistics.  This is used only if the MAC
+ * does not have any other way to prevent stats counter overflow.
+ */
+static void mac_stats_task(void *data)
+{
+	int i;
+	struct adapter *adapter = data;
+
+	for_each_port(adapter, i) {
+		struct port_info *p = &adapter->port[i];
+
+		if (netif_running(p->dev))
+			p->mac->ops->statistics_update(p->mac,
+						       MAC_STATS_UPDATE_FAST);
+	}
+
+	/* Schedule the next statistics update if any port is active. */
+	spin_lock(&adapter->work_lock);
+	if (adapter->open_device_map & PORT_MASK)
+		schedule_mac_stats_update(adapter,
+					  adapter->params.stats_update_period);
+	spin_unlock(&adapter->work_lock);
+}
+
+/*
+ * Processes elmer0 external interrupts in process context.
+ */
+static void ext_intr_task(void *data)
+{
+	struct adapter *adapter = data;
+
+	elmer0_ext_intr_handler(adapter);
+
+	/* Now reenable external interrupts */
+	spin_lock_irq(&adapter->async_lock);
+	adapter->slow_intr_mask |= F_PL_INTR_EXT;
+	writel(F_PL_INTR_EXT, adapter->regs + A_PL_CAUSE);
+	writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+                   adapter->regs + A_PL_ENABLE);
+	spin_unlock_irq(&adapter->async_lock);
+}
+
+/*
+ * Interrupt-context handler for elmer0 external interrupts.
+ */
+void t1_elmer0_ext_intr(struct adapter *adapter)
+{
+	/*
+	 * Schedule a task to handle external interrupts as we require
+	 * a process context.  We disable EXT interrupts in the interim
+	 * and let the task reenable them when it's done.
+	 */
+	adapter->slow_intr_mask &= ~F_PL_INTR_EXT;
+	writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
+                   adapter->regs + A_PL_ENABLE);
+	schedule_work(&adapter->ext_intr_handler_task);
+}
+
+void t1_fatal_err(struct adapter *adapter)
+{
+	if (adapter->flags & FULL_INIT_DONE) {
+		t1_sge_stop(adapter->sge);
+		t1_interrupts_disable(adapter);
+	}
+	CH_ALERT("%s: encountered fatal error, operation suspended\n",
+		 adapter->name);
+}
+
+static int __devinit init_one(struct pci_dev *pdev,
+			      const struct pci_device_id *ent)
+{
+	static int version_printed;
+
+	int i, err, pci_using_dac = 0;
+	unsigned long mmio_start, mmio_len;
+	const struct board_info *bi;
+	struct adapter *adapter = NULL;
+	struct port_info *pi;
+
+	if (!version_printed) {
+		printk(KERN_INFO "%s - version %s\n", DRV_DESCRIPTION,
+		       DRV_VERSION);
+		++version_printed;
+	}
+
+	err = pci_enable_device(pdev);
+	if (err)
+        return err;
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		CH_ERR("%s: cannot find PCI device memory base address\n",
+		       pci_name(pdev));
+		err = -ENODEV;
+		goto out_disable_pdev;
+	}
+
+	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+		pci_using_dac = 1;
+
+		if (pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK)) {
+			CH_ERR("%s: unable to obtain 64-bit DMA for"
+			       "consistent allocations\n", pci_name(pdev));
+			err = -ENODEV;
+			goto out_disable_pdev;
+		}
+
+	} else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
+		CH_ERR("%s: no usable DMA configuration\n", pci_name(pdev));
+		goto out_disable_pdev;
+	}
+
+	err = pci_request_regions(pdev, DRV_NAME);
+	if (err) {
+		CH_ERR("%s: cannot obtain PCI resources\n", pci_name(pdev));
+		goto out_disable_pdev;
+	}
+
+	pci_set_master(pdev);
+
+    mmio_start = pci_resource_start(pdev, 0);
+	mmio_len = pci_resource_len(pdev, 0);
+	bi = t1_get_board_info(ent->driver_data);
+
+	for (i = 0; i < bi->port_number; ++i) {
+		struct net_device *netdev;
+
+		netdev = alloc_etherdev(adapter ? 0 : sizeof(*adapter));
+		if (!netdev) {
+			err = -ENOMEM;
+			goto out_free_dev;
+		}
+
+		SET_MODULE_OWNER(netdev);
+		SET_NETDEV_DEV(netdev, &pdev->dev);
+
+		if (!adapter) {
+			adapter = netdev->priv;
+			adapter->pdev = pdev;
+			adapter->port[0].dev = netdev;  /* so we don't leak it */
+
+			adapter->regs = ioremap(mmio_start, mmio_len);
+			if (!adapter->regs) {
+				CH_ERR("%s: cannot map device registers\n",
+				       pci_name(pdev));
+				err = -ENOMEM;
+				goto out_free_dev;
+			}
+
+			if (t1_get_board_rev(adapter, bi, &adapter->params)) {
+				err = -ENODEV;	  /* Can't handle this chip rev */
+				goto out_free_dev;
+			}
+
+			adapter->name = pci_name(pdev);
+			adapter->msg_enable = dflt_msg_enable;
+			adapter->mmio_len = mmio_len;
+
+			init_MUTEX(&adapter->mib_mutex);
+			spin_lock_init(&adapter->tpi_lock);
+			spin_lock_init(&adapter->work_lock);
+			spin_lock_init(&adapter->async_lock);
+
+			INIT_WORK(&adapter->ext_intr_handler_task,
+				  ext_intr_task, adapter);
+			INIT_WORK(&adapter->stats_update_task, mac_stats_task,
+				  adapter);
+#ifdef work_struct
+			init_timer(&adapter->stats_update_timer);
+			adapter->stats_update_timer.function = mac_stats_timer;
+			adapter->stats_update_timer.data =
+				(unsigned long)adapter;
+#endif
+
+			pci_set_drvdata(pdev, netdev);
+		}
+
+		pi = &adapter->port[i];
+		pi->dev = netdev;
+		netif_carrier_off(netdev);
+		netdev->irq = pdev->irq;
+		netdev->if_port = i;
+		netdev->mem_start = mmio_start;
+		netdev->mem_end = mmio_start + mmio_len - 1;
+		netdev->priv = adapter;
+		netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
+		netdev->features |= NETIF_F_LLTX;
+
+		adapter->flags |= RX_CSUM_ENABLED | TCP_CSUM_CAPABLE;
+		if (pci_using_dac)
+			netdev->features |= NETIF_F_HIGHDMA;
+		if (vlan_tso_capable(adapter)) {
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+			adapter->flags |= VLAN_ACCEL_CAPABLE;
+			netdev->features |=
+				NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+			netdev->vlan_rx_register = vlan_rx_register;
+			netdev->vlan_rx_kill_vid = vlan_rx_kill_vid;
+#endif
+			adapter->flags |= TSO_CAPABLE;
+			netdev->features |= NETIF_F_TSO;
+		}
+
+		netdev->open = cxgb_open;
+		netdev->stop = cxgb_close;
+		netdev->hard_start_xmit = t1_start_xmit;
+		netdev->hard_header_len += (adapter->flags & TSO_CAPABLE) ?
+			sizeof(struct cpl_tx_pkt_lso) :
+			sizeof(struct cpl_tx_pkt);
+		netdev->get_stats = t1_get_stats;
+		netdev->set_multicast_list = t1_set_rxmode;
+		netdev->do_ioctl = t1_ioctl;
+		netdev->change_mtu = t1_change_mtu;
+		netdev->set_mac_address = t1_set_mac_addr;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+		netdev->poll_controller = t1_netpoll;
+#endif
+		netdev->weight = 64;
+
+        SET_ETHTOOL_OPS(netdev, &t1_ethtool_ops);
+	}
+
+	if (t1_init_sw_modules(adapter, bi) < 0) {
+		err = -ENODEV;
+		goto out_free_dev;
+	}
+
+	/*
+	 * The card is now ready to go.  If any errors occur during device
+	 * registration we do not fail the whole card but rather proceed only
+	 * with the ports we manage to register successfully.  However we must
+	 * register at least one net device.
+	 */
+	for (i = 0; i < bi->port_number; ++i) {
+		err = register_netdev(adapter->port[i].dev);
+		if (err)
+			CH_WARN("%s: cannot register net device %s, skipping\n",
+				pci_name(pdev), adapter->port[i].dev->name);
+		else {
+			/*
+			 * Change the name we use for messages to the name of
+			 * the first successfully registered interface.
+			 */
+			if (!adapter->registered_device_map)
+				adapter->name = adapter->port[i].dev->name;
+
+                __set_bit(i, &adapter->registered_device_map);
+		}
+	}
+	if (!adapter->registered_device_map) {
+		CH_ERR("%s: could not register any net devices\n",
+		       pci_name(pdev));
+		goto out_release_adapter_res;
+	}
+
+	printk(KERN_INFO "%s: %s (rev %d), %s %dMHz/%d-bit\n", adapter->name,
+	       bi->desc, adapter->params.chip_revision,
+	       adapter->params.pci.is_pcix ? "PCIX" : "PCI",
+	       adapter->params.pci.speed, adapter->params.pci.width);
+	return 0;
+
+ out_release_adapter_res:
+	t1_free_sw_modules(adapter);
+ out_free_dev:
+	if (adapter) {
+		if (adapter->regs) iounmap(adapter->regs);
+		for (i = bi->port_number - 1; i >= 0; --i)
+			if (adapter->port[i].dev) {
+				cxgb_proc_cleanup(adapter, proc_root_driver);
+				kfree(adapter->port[i].dev);
+			}
+	}
+	pci_release_regions(pdev);
+ out_disable_pdev:
+	pci_disable_device(pdev);
+	pci_set_drvdata(pdev, NULL);
+	return err;
+}
+
+static inline void t1_sw_reset(struct pci_dev *pdev)
+{
+	pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 3);
+	pci_write_config_dword(pdev, A_PCICFG_PM_CSR, 0);
+}
+
+static void __devexit remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	if (dev) {
+		int i;
+		struct adapter *adapter = dev->priv;
+
+		for_each_port(adapter, i)
+			if (test_bit(i, &adapter->registered_device_map))
+				unregister_netdev(adapter->port[i].dev);
+
+		t1_free_sw_modules(adapter);
+		iounmap(adapter->regs);
+		while (--i >= 0)
+			if (adapter->port[i].dev) {
+				cxgb_proc_cleanup(adapter, proc_root_driver);
+				kfree(adapter->port[i].dev);
+			}
+		pci_release_regions(pdev);
+		pci_disable_device(pdev);
+		pci_set_drvdata(pdev, NULL);
+		t1_sw_reset(pdev);
+	}
+}
+
+static struct pci_driver driver = {
+	.name     = DRV_NAME,
+	.id_table = t1_pci_tbl,
+	.probe    = init_one,
+	.remove   = __devexit_p(remove_one),
+};
+
+static int __init t1_init_module(void)
+{
+	return pci_module_init(&driver);
+}
+
+static void __exit t1_cleanup_module(void)
+{
+	pci_unregister_driver(&driver);
+}
+
+module_init(t1_init_module);
+module_exit(t1_cleanup_module);
diff --git a/drivers/net/chelsio/elmer0.h b/drivers/net/chelsio/elmer0.h
new file mode 100644
index 00000000000..5590cb2dac1
--- /dev/null
+++ b/drivers/net/chelsio/elmer0.h
@@ -0,0 +1,151 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: elmer0.h                                                            *
+ * $Revision: 1.6 $                                                          *
+ * $Date: 2005/06/21 22:49:43 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_ELMER0_H_
+#define _CXGB_ELMER0_H_
+
+/* ELMER0 registers */
+#define A_ELMER0_VERSION 0x100000
+#define A_ELMER0_PHY_CFG 0x100004
+#define A_ELMER0_INT_ENABLE 0x100008
+#define A_ELMER0_INT_CAUSE 0x10000c
+#define A_ELMER0_GPI_CFG 0x100010
+#define A_ELMER0_GPI_STAT 0x100014
+#define A_ELMER0_GPO 0x100018
+#define A_ELMER0_PORT0_MI1_CFG 0x400000
+
+#define S_MI1_MDI_ENABLE    0
+#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE)
+#define F_MI1_MDI_ENABLE    V_MI1_MDI_ENABLE(1U)
+
+#define S_MI1_MDI_INVERT    1
+#define V_MI1_MDI_INVERT(x) ((x) << S_MI1_MDI_INVERT)
+#define F_MI1_MDI_INVERT    V_MI1_MDI_INVERT(1U)
+
+#define S_MI1_PREAMBLE_ENABLE    2
+#define V_MI1_PREAMBLE_ENABLE(x) ((x) << S_MI1_PREAMBLE_ENABLE)
+#define F_MI1_PREAMBLE_ENABLE    V_MI1_PREAMBLE_ENABLE(1U)
+
+#define S_MI1_SOF    3
+#define M_MI1_SOF    0x3
+#define V_MI1_SOF(x) ((x) << S_MI1_SOF)
+#define G_MI1_SOF(x) (((x) >> S_MI1_SOF) & M_MI1_SOF)
+
+#define S_MI1_CLK_DIV    5
+#define M_MI1_CLK_DIV    0xff
+#define V_MI1_CLK_DIV(x) ((x) << S_MI1_CLK_DIV)
+#define G_MI1_CLK_DIV(x) (((x) >> S_MI1_CLK_DIV) & M_MI1_CLK_DIV)
+
+#define A_ELMER0_PORT0_MI1_ADDR 0x400004
+
+#define S_MI1_REG_ADDR    0
+#define M_MI1_REG_ADDR    0x1f
+#define V_MI1_REG_ADDR(x) ((x) << S_MI1_REG_ADDR)
+#define G_MI1_REG_ADDR(x) (((x) >> S_MI1_REG_ADDR) & M_MI1_REG_ADDR)
+
+#define S_MI1_PHY_ADDR    5
+#define M_MI1_PHY_ADDR    0x1f
+#define V_MI1_PHY_ADDR(x) ((x) << S_MI1_PHY_ADDR)
+#define G_MI1_PHY_ADDR(x) (((x) >> S_MI1_PHY_ADDR) & M_MI1_PHY_ADDR)
+
+#define A_ELMER0_PORT0_MI1_DATA 0x400008
+
+#define S_MI1_DATA    0
+#define M_MI1_DATA    0xffff
+#define V_MI1_DATA(x) ((x) << S_MI1_DATA)
+#define G_MI1_DATA(x) (((x) >> S_MI1_DATA) & M_MI1_DATA)
+
+#define A_ELMER0_PORT0_MI1_OP 0x40000c
+
+#define S_MI1_OP    0
+#define M_MI1_OP    0x3
+#define V_MI1_OP(x) ((x) << S_MI1_OP)
+#define G_MI1_OP(x) (((x) >> S_MI1_OP) & M_MI1_OP)
+
+#define S_MI1_ADDR_AUTOINC    2
+#define V_MI1_ADDR_AUTOINC(x) ((x) << S_MI1_ADDR_AUTOINC)
+#define F_MI1_ADDR_AUTOINC    V_MI1_ADDR_AUTOINC(1U)
+
+#define S_MI1_OP_BUSY    31
+#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY)
+#define F_MI1_OP_BUSY    V_MI1_OP_BUSY(1U)
+
+#define A_ELMER0_PORT1_MI1_CFG 0x500000
+#define A_ELMER0_PORT1_MI1_ADDR 0x500004
+#define A_ELMER0_PORT1_MI1_DATA 0x500008
+#define A_ELMER0_PORT1_MI1_OP 0x50000c
+#define A_ELMER0_PORT2_MI1_CFG 0x600000
+#define A_ELMER0_PORT2_MI1_ADDR 0x600004
+#define A_ELMER0_PORT2_MI1_DATA 0x600008
+#define A_ELMER0_PORT2_MI1_OP 0x60000c
+#define A_ELMER0_PORT3_MI1_CFG 0x700000
+#define A_ELMER0_PORT3_MI1_ADDR 0x700004
+#define A_ELMER0_PORT3_MI1_DATA 0x700008
+#define A_ELMER0_PORT3_MI1_OP 0x70000c
+
+/* Simple bit definition for GPI and GP0 registers. */
+#define     ELMER0_GP_BIT0              0x0001
+#define     ELMER0_GP_BIT1              0x0002
+#define     ELMER0_GP_BIT2              0x0004
+#define     ELMER0_GP_BIT3              0x0008
+#define     ELMER0_GP_BIT4              0x0010
+#define     ELMER0_GP_BIT5              0x0020
+#define     ELMER0_GP_BIT6              0x0040
+#define     ELMER0_GP_BIT7              0x0080
+#define     ELMER0_GP_BIT8              0x0100
+#define     ELMER0_GP_BIT9              0x0200
+#define     ELMER0_GP_BIT10             0x0400
+#define     ELMER0_GP_BIT11             0x0800
+#define     ELMER0_GP_BIT12             0x1000
+#define     ELMER0_GP_BIT13             0x2000
+#define     ELMER0_GP_BIT14             0x4000
+#define     ELMER0_GP_BIT15             0x8000
+#define     ELMER0_GP_BIT16             0x10000
+#define     ELMER0_GP_BIT17             0x20000
+#define     ELMER0_GP_BIT18             0x40000
+#define     ELMER0_GP_BIT19             0x80000
+
+#define MI1_OP_DIRECT_WRITE 1
+#define MI1_OP_DIRECT_READ  2
+
+#define MI1_OP_INDIRECT_ADDRESS  0
+#define MI1_OP_INDIRECT_WRITE    1
+#define MI1_OP_INDIRECT_READ_INC 2
+#define MI1_OP_INDIRECT_READ     3
+
+#endif /* _CXGB_ELMER0_H_ */
diff --git a/drivers/net/chelsio/espi.c b/drivers/net/chelsio/espi.c
new file mode 100644
index 00000000000..230642571c9
--- /dev/null
+++ b/drivers/net/chelsio/espi.c
@@ -0,0 +1,346 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: espi.c                                                              *
+ * $Revision: 1.14 $                                                         *
+ * $Date: 2005/05/14 00:59:32 $                                              *
+ * Description:                                                              *
+ *  Ethernet SPI functionality.                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "common.h"
+#include "regs.h"
+#include "espi.h"
+
+struct peespi {
+	adapter_t *adapter;
+	struct espi_intr_counts intr_cnt;
+	u32 misc_ctrl;
+	spinlock_t lock;
+};
+
+#define ESPI_INTR_MASK (F_DIP4ERR | F_RXDROP | F_TXDROP | F_RXOVERFLOW | \
+			F_RAMPARITYERR | F_DIP2PARITYERR)
+#define MON_MASK  (V_MONITORED_PORT_NUM(3) | F_MONITORED_DIRECTION \
+		   | F_MONITORED_INTERFACE)
+
+#define TRICN_CNFG 14
+#define TRICN_CMD_READ  0x11
+#define TRICN_CMD_WRITE 0x21
+#define TRICN_CMD_ATTEMPTS 10
+
+static int tricn_write(adapter_t *adapter, int bundle_addr, int module_addr,
+		       int ch_addr, int reg_offset, u32 wr_data)
+{
+	int busy, attempts = TRICN_CMD_ATTEMPTS;
+
+	writel(V_WRITE_DATA(wr_data) |
+	       V_REGISTER_OFFSET(reg_offset) |
+	       V_CHANNEL_ADDR(ch_addr) | V_MODULE_ADDR(module_addr) |
+	       V_BUNDLE_ADDR(bundle_addr) |
+	       V_SPI4_COMMAND(TRICN_CMD_WRITE),
+	       adapter->regs + A_ESPI_CMD_ADDR);
+	writel(0, adapter->regs + A_ESPI_GOSTAT);
+
+	do {
+		busy = readl(adapter->regs + A_ESPI_GOSTAT) & F_ESPI_CMD_BUSY;
+	} while (busy && --attempts);
+
+	if (busy)
+		CH_ERR("%s: TRICN write timed out\n", adapter->name);
+
+	return busy;
+}
+
+/* 1. Deassert rx_reset_core. */
+/* 2. Program TRICN_CNFG registers. */
+/* 3. Deassert rx_reset_link */
+static int tricn_init(adapter_t *adapter)
+{
+	int     i               = 0;
+	int     sme             = 1;
+	int     stat            = 0;
+	int     timeout         = 0;
+	int     is_ready        = 0;
+	int     dynamic_deskew  = 0;
+
+	if (dynamic_deskew)
+		sme = 0;
+
+
+	/* 1 */
+	timeout=1000;
+	do {
+		stat = readl(adapter->regs + A_ESPI_RX_RESET);
+		is_ready = (stat & 0x4);
+		timeout--;
+		udelay(5);
+	} while (!is_ready || (timeout==0));
+	writel(0x2, adapter->regs + A_ESPI_RX_RESET);
+	if (timeout==0)
+	{
+		CH_ERR("ESPI : ERROR : Timeout tricn_init() \n");
+		t1_fatal_err(adapter);
+	}
+
+	/* 2 */
+	if (sme) {
+		tricn_write(adapter, 0, 0, 0, TRICN_CNFG, 0x81);
+		tricn_write(adapter, 0, 1, 0, TRICN_CNFG, 0x81);
+		tricn_write(adapter, 0, 2, 0, TRICN_CNFG, 0x81);
+	}
+	for (i=1; i<= 8; i++) tricn_write(adapter, 0, 0, i, TRICN_CNFG, 0xf1);
+	for (i=1; i<= 2; i++) tricn_write(adapter, 0, 1, i, TRICN_CNFG, 0xf1);
+	for (i=1; i<= 3; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+	for (i=4; i<= 4; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+	for (i=5; i<= 5; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xe1);
+	for (i=6; i<= 6; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+	for (i=7; i<= 7; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0x80);
+	for (i=8; i<= 8; i++) tricn_write(adapter, 0, 2, i, TRICN_CNFG, 0xf1);
+
+	/* 3 */
+	writel(0x3, adapter->regs + A_ESPI_RX_RESET);
+
+	return 0;
+}
+
+void t1_espi_intr_enable(struct peespi *espi)
+{
+	u32 enable, pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
+
+	/*
+	 * Cannot enable ESPI interrupts on T1B because HW asserts the
+	 * interrupt incorrectly, namely the driver gets ESPI interrupts
+	 * but no data is actually dropped (can verify this reading the ESPI
+	 * drop registers).  Also, once the ESPI interrupt is asserted it
+	 * cannot be cleared (HW bug).
+	 */
+	enable = t1_is_T1B(espi->adapter) ? 0 : ESPI_INTR_MASK;
+	writel(enable, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	writel(pl_intr | F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
+}
+
+void t1_espi_intr_clear(struct peespi *espi)
+{
+	writel(0xffffffff, espi->adapter->regs + A_ESPI_INTR_STATUS);
+	writel(F_PL_INTR_ESPI, espi->adapter->regs + A_PL_CAUSE);
+}
+
+void t1_espi_intr_disable(struct peespi *espi)
+{
+	u32 pl_intr = readl(espi->adapter->regs + A_PL_ENABLE);
+
+	writel(0, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	writel(pl_intr & ~F_PL_INTR_ESPI, espi->adapter->regs + A_PL_ENABLE);
+}
+
+int t1_espi_intr_handler(struct peespi *espi)
+{
+	u32 cnt;
+	u32 status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
+
+	if (status & F_DIP4ERR)
+		espi->intr_cnt.DIP4_err++;
+	if (status & F_RXDROP)
+		espi->intr_cnt.rx_drops++;
+	if (status & F_TXDROP)
+		espi->intr_cnt.tx_drops++;
+	if (status & F_RXOVERFLOW)
+		espi->intr_cnt.rx_ovflw++;
+	if (status & F_RAMPARITYERR)
+		espi->intr_cnt.parity_err++;
+	if (status & F_DIP2PARITYERR) {
+		espi->intr_cnt.DIP2_parity_err++;
+
+		/*
+		 * Must read the error count to clear the interrupt
+		 * that it causes.
+		 */
+		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+	}
+
+	/*
+	 * For T1B we need to write 1 to clear ESPI interrupts.  For T2+ we
+	 * write the status as is.
+	 */
+	if (status && t1_is_T1B(espi->adapter))
+		status = 1;
+	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
+	return 0;
+}
+
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi)
+{
+    return &espi->intr_cnt;
+}
+
+static void espi_setup_for_pm3393(adapter_t *adapter)
+{
+	u32 wmark = t1_is_T1B(adapter) ? 0x4000 : 0x3200;
+
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+	writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN3);
+	writel(0x100, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
+	writel(wmark, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
+	writel(3, adapter->regs + A_ESPI_CALENDAR_LENGTH);
+	writel(0x08000008, adapter->regs + A_ESPI_TRAIN);
+	writel(V_RX_NPORTS(1) | V_TX_NPORTS(1), adapter->regs + A_PORT_CONFIG);
+}
+
+/* T2 Init part --  */
+/* 1. Set T_ESPI_MISCCTRL_ADDR */
+/* 2. Init ESPI registers. */
+/* 3. Init TriCN Hard Macro */
+int t1_espi_init(struct peespi *espi, int mac_type, int nports)
+{
+	u32 cnt;
+
+	u32 status_enable_extra = 0;
+	adapter_t *adapter = espi->adapter;
+	u32 status, burstval = 0x800100;
+
+	/* Disable ESPI training.  MACs that can handle it enable it below. */
+	writel(0, adapter->regs + A_ESPI_TRAIN);
+
+	if (is_T2(adapter)) {
+		writel(V_OUT_OF_SYNC_COUNT(4) |
+		       V_DIP2_PARITY_ERR_THRES(3) |
+		       V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
+		if (nports == 4) {
+			/* T204: maxburst1 = 0x40, maxburst2 = 0x20 */
+			burstval = 0x200040;
+		}
+	}
+	writel(burstval, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+
+	switch (mac_type) {
+	case CHBT_MAC_PM3393:
+		espi_setup_for_pm3393(adapter);
+		break;
+	default:
+		return -1;
+	}
+
+	/*
+	 * Make sure any pending interrupts from the SPI are
+	 * Cleared before enabling the interrupt.
+	 */
+	writel(ESPI_INTR_MASK, espi->adapter->regs + A_ESPI_INTR_ENABLE);
+	status = readl(espi->adapter->regs + A_ESPI_INTR_STATUS);
+	if (status & F_DIP2PARITYERR) {
+		cnt = readl(espi->adapter->regs + A_ESPI_DIP2_ERR_COUNT);
+	}
+
+	/*
+	 * For T1B we need to write 1 to clear ESPI interrupts.  For T2+ we
+	 * write the status as is.
+	 */
+	if (status && t1_is_T1B(espi->adapter))
+		status = 1;
+	writel(status, espi->adapter->regs + A_ESPI_INTR_STATUS);
+
+	writel(status_enable_extra | F_RXSTATUSENABLE,
+	       adapter->regs + A_ESPI_FIFO_STATUS_ENABLE);
+
+	if (is_T2(adapter)) {
+		tricn_init(adapter);
+		/*
+		 * Always position the control at the 1st port egress IN
+		 * (sop,eop) counter to reduce PIOs for T/N210 workaround.
+		 */
+		espi->misc_ctrl = (readl(adapter->regs + A_ESPI_MISC_CONTROL)
+				   & ~MON_MASK) | (F_MONITORED_DIRECTION
+				   | F_MONITORED_INTERFACE);
+		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+		spin_lock_init(&espi->lock);
+	}
+
+	return 0;
+}
+
+void t1_espi_destroy(struct peespi *espi)
+{
+	kfree(espi);
+}
+
+struct peespi *t1_espi_create(adapter_t *adapter)
+{
+	struct peespi *espi = kmalloc(sizeof(*espi), GFP_KERNEL);
+
+	memset(espi, 0, sizeof(*espi));
+
+	if (espi)
+		espi->adapter = adapter;
+	return espi;
+}
+
+void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val)
+{
+	struct peespi *espi = adapter->espi;
+
+	if (!is_T2(adapter))
+		return;
+	spin_lock(&espi->lock);
+	espi->misc_ctrl = (val & ~MON_MASK) |
+			  (espi->misc_ctrl & MON_MASK);
+	writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+	spin_unlock(&espi->lock);
+}
+
+u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait)
+{
+	u32 sel;
+
+	struct peespi *espi = adapter->espi;
+
+	if (!is_T2(adapter))
+		return 0;
+	sel = V_MONITORED_PORT_NUM((addr & 0x3c) >> 2);
+	if (!wait) {
+		if (!spin_trylock(&espi->lock))
+			return 0;
+	}
+	else
+		spin_lock(&espi->lock);
+	if ((sel != (espi->misc_ctrl & MON_MASK))) {
+		writel(((espi->misc_ctrl & ~MON_MASK) | sel),
+		       adapter->regs + A_ESPI_MISC_CONTROL);
+		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+		writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+	}
+	else
+		sel = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+	spin_unlock(&espi->lock);
+	return sel;
+}
diff --git a/drivers/net/chelsio/espi.h b/drivers/net/chelsio/espi.h
new file mode 100644
index 00000000000..c90e37f8457
--- /dev/null
+++ b/drivers/net/chelsio/espi.h
@@ -0,0 +1,68 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: espi.h                                                              *
+ * $Revision: 1.7 $                                                          *
+ * $Date: 2005/06/21 18:29:47 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_ESPI_H_
+#define _CXGB_ESPI_H_
+
+#include "common.h"
+
+struct espi_intr_counts {
+	unsigned int DIP4_err;
+	unsigned int rx_drops;
+	unsigned int tx_drops;
+	unsigned int rx_ovflw;
+	unsigned int parity_err;
+	unsigned int DIP2_parity_err;
+};
+
+struct peespi;
+
+struct peespi *t1_espi_create(adapter_t *adapter);
+void t1_espi_destroy(struct peespi *espi);
+int t1_espi_init(struct peespi *espi, int mac_type, int nports);
+
+void t1_espi_intr_enable(struct peespi *);
+void t1_espi_intr_clear(struct peespi *);
+void t1_espi_intr_disable(struct peespi *);
+int t1_espi_intr_handler(struct peespi *);
+const struct espi_intr_counts *t1_espi_get_intr_counts(struct peespi *espi);
+
+void t1_espi_set_misc_ctrl(adapter_t *adapter, u32 val);
+u32 t1_espi_get_mon(adapter_t *adapter, u32 addr, u8 wait);
+
+#endif /* _CXGB_ESPI_H_ */
diff --git a/drivers/net/chelsio/gmac.h b/drivers/net/chelsio/gmac.h
new file mode 100644
index 00000000000..746b0eeea96
--- /dev/null
+++ b/drivers/net/chelsio/gmac.h
@@ -0,0 +1,134 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: gmac.h                                                              *
+ * $Revision: 1.6 $                                                          *
+ * $Date: 2005/06/21 18:29:47 $                                              *
+ * Description:                                                              *
+ *  Generic MAC functionality.                                               *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_GMAC_H_
+#define _CXGB_GMAC_H_
+
+#include "common.h"
+
+enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL };
+enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 };
+
+struct cmac_statistics {
+	/* Transmit */
+	u64 TxOctetsOK;
+	u64 TxOctetsBad;
+	u64 TxUnicastFramesOK;
+	u64 TxMulticastFramesOK;
+	u64 TxBroadcastFramesOK;
+	u64 TxPauseFrames;
+	u64 TxFramesWithDeferredXmissions;
+	u64 TxLateCollisions;
+	u64 TxTotalCollisions;
+	u64 TxFramesAbortedDueToXSCollisions;
+	u64 TxUnderrun;
+	u64 TxLengthErrors;
+	u64 TxInternalMACXmitError;
+	u64 TxFramesWithExcessiveDeferral;
+	u64 TxFCSErrors;
+
+	/* Receive */
+	u64 RxOctetsOK;
+	u64 RxOctetsBad;
+	u64 RxUnicastFramesOK;
+	u64 RxMulticastFramesOK;
+	u64 RxBroadcastFramesOK;
+	u64 RxPauseFrames;
+	u64 RxFCSErrors;
+	u64 RxAlignErrors;
+	u64 RxSymbolErrors;
+	u64 RxDataErrors;
+	u64 RxSequenceErrors;
+	u64 RxRuntErrors;
+	u64 RxJabberErrors;
+	u64 RxInternalMACRcvError;
+	u64 RxInRangeLengthErrors;
+	u64 RxOutOfRangeLengthField;
+	u64 RxFrameTooLongErrors;
+};
+
+struct cmac_ops {
+	void (*destroy)(struct cmac *);
+	int (*reset)(struct cmac *);
+	int (*interrupt_enable)(struct cmac *);
+	int (*interrupt_disable)(struct cmac *);
+	int (*interrupt_clear)(struct cmac *);
+	int (*interrupt_handler)(struct cmac *);
+
+	int (*enable)(struct cmac *, int);
+	int (*disable)(struct cmac *, int);
+
+	int (*loopback_enable)(struct cmac *);
+	int (*loopback_disable)(struct cmac *);
+
+	int (*set_mtu)(struct cmac *, int mtu);
+	int (*set_rx_mode)(struct cmac *, struct t1_rx_mode *rm);
+
+	int (*set_speed_duplex_fc)(struct cmac *, int speed, int duplex, int fc);
+	int (*get_speed_duplex_fc)(struct cmac *, int *speed, int *duplex,
+				   int *fc);
+
+	const struct cmac_statistics *(*statistics_update)(struct cmac *, int);
+
+	int (*macaddress_get)(struct cmac *, u8 mac_addr[6]);
+	int (*macaddress_set)(struct cmac *, u8 mac_addr[6]);
+};
+
+typedef struct _cmac_instance cmac_instance;
+
+struct cmac {
+	struct cmac_statistics stats;
+	adapter_t *adapter;
+	struct cmac_ops *ops;
+	cmac_instance *instance;
+};
+
+struct gmac {
+	unsigned int stats_update_period;
+	struct cmac *(*create)(adapter_t *adapter, int index);
+	int (*reset)(adapter_t *);
+};
+
+extern struct gmac t1_pm3393_ops;
+extern struct gmac t1_chelsio_mac_ops;
+extern struct gmac t1_vsc7321_ops;
+extern struct gmac t1_ixf1010_ops;
+extern struct gmac t1_dummy_mac_ops;
+
+#endif /* _CXGB_GMAC_H_ */
diff --git a/drivers/net/chelsio/mv88x201x.c b/drivers/net/chelsio/mv88x201x.c
new file mode 100644
index 00000000000..db503428278
--- /dev/null
+++ b/drivers/net/chelsio/mv88x201x.c
@@ -0,0 +1,252 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: mv88x201x.c                                                         *
+ * $Revision: 1.12 $                                                         *
+ * $Date: 2005/04/15 19:27:14 $                                              *
+ * Description:                                                              *
+ *  Marvell PHY (mv88x201x) functionality.                                   *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "cphy.h"
+#include "elmer0.h"
+
+/*
+ * The 88x2010 Rev C. requires some link status registers * to be read
+ * twice in order to get the right values. Future * revisions will fix
+ * this problem and then this macro * can disappear.
+ */
+#define MV88x2010_LINK_STATUS_BUGS    1
+
+static int led_init(struct cphy *cphy)
+{
+	/* Setup the LED registers so we can turn on/off.
+	 * Writing these bits maps control to another
+	 * register. mmd(0x1) addr(0x7)
+	 */
+	mdio_write(cphy, 0x3, 0x8304, 0xdddd);
+	return 0;
+}
+
+static int led_link(struct cphy *cphy, u32 do_enable)
+{
+	u32 led = 0;
+#define LINK_ENABLE_BIT 0x1
+
+	mdio_read(cphy, 0x1, 0x7, &led);
+
+	if (do_enable & LINK_ENABLE_BIT) {
+		led |= LINK_ENABLE_BIT;
+		mdio_write(cphy, 0x1, 0x7, led);
+	} else {
+		led &= ~LINK_ENABLE_BIT;
+		mdio_write(cphy, 0x1, 0x7, led);
+	}
+	return 0;
+}
+
+/* Port Reset */
+static int mv88x201x_reset(struct cphy *cphy, int wait)
+{
+	/* This can be done through registers.  It is not required since
+	 * a full chip reset is used.
+	 */
+	return 0;
+}
+
+static int mv88x201x_interrupt_enable(struct cphy *cphy)
+{
+	u32 elmer;
+
+	/* Enable PHY LASI interrupts. */
+	mdio_write(cphy, 0x1, 0x9002, 0x1);
+
+	/* Enable Marvell interrupts through Elmer0. */
+	t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+	elmer |= ELMER0_GP_BIT6;
+	t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	return 0;
+}
+
+static int mv88x201x_interrupt_disable(struct cphy *cphy)
+{
+	u32 elmer;
+
+	/* Disable PHY LASI interrupts. */
+	mdio_write(cphy, 0x1, 0x9002, 0x0);
+
+	/* Disable Marvell interrupts through Elmer0. */
+	t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
+	elmer &= ~ELMER0_GP_BIT6;
+	t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
+	return 0;
+}
+
+static int mv88x201x_interrupt_clear(struct cphy *cphy)
+{
+	u32 elmer;
+	u32 val;
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+	/* Required to read twice before clear takes affect. */
+	mdio_read(cphy, 0x1, 0x9003, &val);
+	mdio_read(cphy, 0x1, 0x9004, &val);
+	mdio_read(cphy, 0x1, 0x9005, &val);
+
+	/* Read this register after the others above it else
+	 * the register doesn't clear correctly.
+	 */
+	mdio_read(cphy, 0x1, 0x1, &val);
+#endif
+
+	/* Clear link status. */
+	mdio_read(cphy, 0x1, 0x1, &val);
+	/* Clear PHY LASI interrupts. */
+	mdio_read(cphy, 0x1, 0x9005, &val);
+
+#ifdef MV88x2010_LINK_STATUS_BUGS
+	/* Do it again. */
+	mdio_read(cphy, 0x1, 0x9003, &val);
+	mdio_read(cphy, 0x1, 0x9004, &val);
+#endif
+
+	/* Clear Marvell interrupts through Elmer0. */
+	t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
+	elmer |= ELMER0_GP_BIT6;
+	t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
+	return 0;
+}
+
+static int mv88x201x_interrupt_handler(struct cphy *cphy)
+{
+	/* Clear interrupts */
+	mv88x201x_interrupt_clear(cphy);
+
+	/* We have only enabled link change interrupts and so
+	 * cphy_cause must be a link change interrupt.
+	 */
+	return cphy_cause_link_change;
+}
+
+static int mv88x201x_set_loopback(struct cphy *cphy, int on)
+{
+	return 0;
+}
+
+static int mv88x201x_get_link_status(struct cphy *cphy, int *link_ok,
+				     int *speed, int *duplex, int *fc)
+{
+	u32 val = 0;
+#define LINK_STATUS_BIT 0x4
+
+	if (link_ok) {
+		/* Read link status. */
+		mdio_read(cphy, 0x1, 0x1, &val);
+		val &= LINK_STATUS_BIT;
+		*link_ok = (val == LINK_STATUS_BIT);
+		/* Turn on/off Link LED */
+		led_link(cphy, *link_ok);
+	}
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	if (fc)
+		*fc = PAUSE_RX | PAUSE_TX;
+	return 0;
+}
+
+static void mv88x201x_destroy(struct cphy *cphy)
+{
+	kfree(cphy);
+}
+
+static struct cphy_ops mv88x201x_ops = {
+	.destroy           = mv88x201x_destroy,
+	.reset             = mv88x201x_reset,
+	.interrupt_enable  = mv88x201x_interrupt_enable,
+	.interrupt_disable = mv88x201x_interrupt_disable,
+	.interrupt_clear   = mv88x201x_interrupt_clear,
+	.interrupt_handler = mv88x201x_interrupt_handler,
+	.get_link_status   = mv88x201x_get_link_status,
+	.set_loopback      = mv88x201x_set_loopback,
+};
+
+static struct cphy *mv88x201x_phy_create(adapter_t *adapter, int phy_addr,
+					 struct mdio_ops *mdio_ops)
+{
+	u32 val;
+	struct cphy *cphy = kmalloc(sizeof(*cphy), GFP_KERNEL);
+
+	if (!cphy)
+		return NULL;
+	memset(cphy, 0, sizeof(*cphy));
+	cphy_init(cphy, adapter, phy_addr, &mv88x201x_ops, mdio_ops);
+
+	/* Commands the PHY to enable XFP's clock. */
+	mdio_read(cphy, 0x3, 0x8300, &val);
+	mdio_write(cphy, 0x3, 0x8300, val | 1);
+
+	/* Clear link status. Required because of a bug in the PHY.  */
+	mdio_read(cphy, 0x1, 0x8, &val);
+	mdio_read(cphy, 0x3, 0x8, &val);
+
+	/* Allows for Link,Ack LED turn on/off */
+	led_init(cphy);
+	return cphy;
+}
+
+/* Chip Reset */
+static int mv88x201x_phy_reset(adapter_t *adapter)
+{
+	u32 val;
+
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val &= ~4;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	msleep(100);
+
+	t1_tpi_write(adapter, A_ELMER0_GPO, val | 4);
+	msleep(1000);
+
+	/* Now lets enable the Laser. Delay 100us */
+	t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+	val |= 0x8000;
+	t1_tpi_write(adapter, A_ELMER0_GPO, val);
+	udelay(100);
+	return 0;
+}
+
+struct gphy t1_mv88x201x_ops = {
+	mv88x201x_phy_create,
+	mv88x201x_phy_reset
+};
diff --git a/drivers/net/chelsio/pm3393.c b/drivers/net/chelsio/pm3393.c
new file mode 100644
index 00000000000..04a1404fc65
--- /dev/null
+++ b/drivers/net/chelsio/pm3393.c
@@ -0,0 +1,826 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: pm3393.c                                                            *
+ * $Revision: 1.16 $                                                         *
+ * $Date: 2005/05/14 00:59:32 $                                              *
+ * Description:                                                              *
+ *  PMC/SIERRA (pm3393) MAC-PHY functionality.                               *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "common.h"
+#include "regs.h"
+#include "gmac.h"
+#include "elmer0.h"
+#include "suni1x10gexp_regs.h"
+
+/* 802.3ae 10Gb/s MDIO Manageable Device(MMD)
+ */
+enum {
+    MMD_RESERVED,
+    MMD_PMAPMD,
+    MMD_WIS,
+    MMD_PCS,
+    MMD_PHY_XGXS,	/* XGMII Extender Sublayer */
+    MMD_DTE_XGXS,
+};
+
+enum {
+    PHY_XGXS_CTRL_1,
+    PHY_XGXS_STATUS_1
+};
+
+#define OFFSET(REG_ADDR)    (REG_ADDR << 2)
+
+/* Max frame size PM3393 can handle. Includes Ethernet header and CRC. */
+#define MAX_FRAME_SIZE  9600
+
+#define IPG 12
+#define TXXG_CONF1_VAL ((IPG << SUNI1x10GEXP_BITOFF_TXXG_IPGT) | \
+	SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN | SUNI1x10GEXP_BITMSK_TXXG_CRCEN | \
+	SUNI1x10GEXP_BITMSK_TXXG_PADEN)
+#define RXXG_CONF1_VAL (SUNI1x10GEXP_BITMSK_RXXG_PUREP | 0x14 | \
+	SUNI1x10GEXP_BITMSK_RXXG_FLCHK | SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP)
+
+/* Update statistics every 15 minutes */
+#define STATS_TICK_SECS (15 * 60)
+
+enum {                     /* RMON registers */
+	RxOctetsReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW,
+	RxUnicastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW,
+	RxMulticastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW,
+	RxBroadcastFramesReceivedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW,
+	RxPAUSEMACCtrlFramesReceived = SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW,
+	RxFrameCheckSequenceErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW,
+	RxFramesLostDueToInternalMACErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW,
+	RxSymbolErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW,
+	RxInRangeLengthErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW,
+	RxFramesTooLongErrors = SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW,
+	RxJabbers = SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW,
+	RxFragments = SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW,
+	RxUndersizedFrames =  SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW,
+
+	TxOctetsTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW,
+	TxFramesLostDueToInternalMACTransmissionError = SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW,
+	TxTransmitSystemError = SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW,
+	TxUnicastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW,
+	TxMulticastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW,
+	TxBroadcastFramesTransmittedOK = SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW,
+	TxPAUSEMACCtrlFramesTransmitted = SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW
+};
+
+struct _cmac_instance {
+	u8 enabled;
+	u8 fc;
+	u8 mac_addr[6];
+};
+
+static int pmread(struct cmac *cmac, u32 reg, u32 * data32)
+{
+	t1_tpi_read(cmac->adapter, OFFSET(reg), data32);
+	return 0;
+}
+
+static int pmwrite(struct cmac *cmac, u32 reg, u32 data32)
+{
+	t1_tpi_write(cmac->adapter, OFFSET(reg), data32);
+	return 0;
+}
+
+/* Port reset. */
+static int pm3393_reset(struct cmac *cmac)
+{
+	return 0;
+}
+
+/*
+ * Enable interrupts for the PM3393
+
+	1. Enable PM3393 BLOCK interrupts.
+	2. Enable PM3393 Master Interrupt bit(INTE)
+	3. Enable ELMER's PM3393 bit.
+	4. Enable Terminator external interrupt.
+*/
+static int pm3393_interrupt_enable(struct cmac *cmac)
+{
+	u32 pl_intr;
+
+	/* PM3393 - Enabling all hardware block interrupts.
+	 */
+	pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0xffff);
+
+	/* Don't interrupt on statistics overflow, we are polling */
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
+
+	pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0xffff);
+	pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0xffff);
+
+	/* PM3393 - Global interrupt enable
+	 */
+	/* TBD XXX Disable for now until we figure out why error interrupts keep asserting. */
+	pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE,
+		0 /*SUNI1x10GEXP_BITMSK_TOP_INTE */ );
+
+	/* TERMINATOR - PL_INTERUPTS_EXT */
+	pl_intr = readl(cmac->adapter->regs + A_PL_ENABLE);
+	pl_intr |= F_PL_INTR_EXT;
+	writel(pl_intr, cmac->adapter->regs + A_PL_ENABLE);
+	return 0;
+}
+
+static int pm3393_interrupt_disable(struct cmac *cmac)
+{
+	u32 elmer;
+
+	/* PM3393 - Enabling HW interrupt blocks. */
+	pmwrite(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_3, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_3, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK, 0);
+	pmwrite(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE, 0);
+
+	/* PM3393 - Global interrupt enable */
+	pmwrite(cmac, SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE, 0);
+
+	/* ELMER - External chip interrupts. */
+	t1_tpi_read(cmac->adapter, A_ELMER0_INT_ENABLE, &elmer);
+	elmer &= ~ELMER0_GP_BIT1;
+	t1_tpi_write(cmac->adapter, A_ELMER0_INT_ENABLE, elmer);
+
+	/* TERMINATOR - PL_INTERUPTS_EXT */
+	/* DO NOT DISABLE TERMINATOR's EXTERNAL INTERRUPTS. ANOTHER CHIP
+	 * COULD WANT THEM ENABLED. We disable PM3393 at the ELMER level.
+	 */
+
+	return 0;
+}
+
+static int pm3393_interrupt_clear(struct cmac *cmac)
+{
+	u32 elmer;
+	u32 pl_intr;
+	u32 val32;
+
+	/* PM3393 - Clearing HW interrupt blocks. Note, this assumes
+	 *          bit WCIMODE=0 for a clear-on-read.
+	 */
+	pmread(cmac, SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_PL4ODP_INTERRUPT, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_RXXG_INTERRUPT, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_TXXG_INTERRUPT, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_PL4IDU_INTERRUPT, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION,
+	       &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS, &val32);
+	pmread(cmac, SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE, &val32);
+
+	/* PM3393 - Global interrupt status
+	 */
+	pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS, &val32);
+
+	/* ELMER - External chip interrupts.
+	 */
+	t1_tpi_read(cmac->adapter, A_ELMER0_INT_CAUSE, &elmer);
+	elmer |= ELMER0_GP_BIT1;
+	t1_tpi_write(cmac->adapter, A_ELMER0_INT_CAUSE, elmer);
+
+	/* TERMINATOR - PL_INTERUPTS_EXT
+	 */
+	pl_intr = readl(cmac->adapter->regs + A_PL_CAUSE);
+	pl_intr |= F_PL_INTR_EXT;
+	writel(pl_intr, cmac->adapter->regs + A_PL_CAUSE);
+
+	return 0;
+}
+
+/* Interrupt handler */
+static int pm3393_interrupt_handler(struct cmac *cmac)
+{
+	u32 master_intr_status;
+/*
+	1. Read master interrupt register.
+	2. Read BLOCK's interrupt status registers.
+	3. Handle BLOCK interrupts.
+*/
+	/* Read the master interrupt status register. */
+	pmread(cmac, SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS,
+	       &master_intr_status);
+
+	/* TBD XXX Lets just clear everything for now */
+	pm3393_interrupt_clear(cmac);
+
+	return 0;
+}
+
+static int pm3393_enable(struct cmac *cmac, int which)
+{
+	if (which & MAC_DIRECTION_RX)
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1,
+			(RXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_RXXG_RXEN));
+
+	if (which & MAC_DIRECTION_TX) {
+		u32 val = TXXG_CONF1_VAL | SUNI1x10GEXP_BITMSK_TXXG_TXEN0;
+
+		if (cmac->instance->fc & PAUSE_RX)
+			val |= SUNI1x10GEXP_BITMSK_TXXG_FCRX;
+		if (cmac->instance->fc & PAUSE_TX)
+			val |= SUNI1x10GEXP_BITMSK_TXXG_FCTX;
+		pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, val);
+	}
+
+	cmac->instance->enabled |= which;
+	return 0;
+}
+
+static int pm3393_enable_port(struct cmac *cmac, int which)
+{
+	/* Clear port statistics */
+	pmwrite(cmac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
+		SUNI1x10GEXP_BITMSK_MSTAT_CLEAR);
+	udelay(2);
+	memset(&cmac->stats, 0, sizeof(struct cmac_statistics));
+
+	pm3393_enable(cmac, which);
+
+	/*
+	 * XXX This should be done by the PHY and preferrably not at all.
+	 * The PHY doesn't give us link status indication on its own so have
+	 * the link management code query it instead.
+	 */
+	{
+		extern void link_changed(adapter_t *adapter, int port_id);
+
+		link_changed(cmac->adapter, 0);
+	}
+	return 0;
+}
+
+static int pm3393_disable(struct cmac *cmac, int which)
+{
+	if (which & MAC_DIRECTION_RX)
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_CONFIG_1, RXXG_CONF1_VAL);
+	if (which & MAC_DIRECTION_TX)
+		pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_CONFIG_1, TXXG_CONF1_VAL);
+
+	/*
+	 * The disable is graceful. Give the PM3393 time.  Can't wait very
+	 * long here, we may be holding locks.
+	 */
+	udelay(20);
+
+	cmac->instance->enabled &= ~which;
+	return 0;
+}
+
+static int pm3393_loopback_enable(struct cmac *cmac)
+{
+	return 0;
+}
+
+static int pm3393_loopback_disable(struct cmac *cmac)
+{
+	return 0;
+}
+
+static int pm3393_set_mtu(struct cmac *cmac, int mtu)
+{
+	int enabled = cmac->instance->enabled;
+
+	/* MAX_FRAME_SIZE includes header + FCS, mtu doesn't */
+	mtu += 14 + 4;
+	if (mtu > MAX_FRAME_SIZE)
+		return -EINVAL;
+
+	/* Disable Rx/Tx MAC before configuring it. */
+	if (enabled)
+		pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH, mtu);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE, mtu);
+
+	if (enabled)
+		pm3393_enable(cmac, enabled);
+	return 0;
+}
+
+static u32 calc_crc(u8 *b, int len)
+{
+	int i;
+	u32 crc = (u32)~0;
+
+	/* calculate crc one bit at a time */
+	while (len--) {
+		crc ^= *b++;
+		for (i = 0; i < 8; i++) {
+			if (crc & 0x1)
+				crc = (crc >> 1) ^ 0xedb88320;
+			else
+				crc = (crc >> 1);
+		}
+	}
+
+	/* reverse bits */
+	crc = ((crc >> 4) & 0x0f0f0f0f) | ((crc << 4) & 0xf0f0f0f0);
+	crc = ((crc >> 2) & 0x33333333) | ((crc << 2) & 0xcccccccc);
+	crc = ((crc >> 1) & 0x55555555) | ((crc << 1) & 0xaaaaaaaa);
+	/* swap bytes */
+	crc = (crc >> 16) | (crc << 16);
+	crc = (crc >> 8 & 0x00ff00ff) | (crc << 8 & 0xff00ff00);
+
+	return crc;
+}
+
+static int pm3393_set_rx_mode(struct cmac *cmac, struct t1_rx_mode *rm)
+{
+	int enabled = cmac->instance->enabled & MAC_DIRECTION_RX;
+	u32 rx_mode;
+
+	/* Disable MAC RX before reconfiguring it */
+	if (enabled)
+		pm3393_disable(cmac, MAC_DIRECTION_RX);
+
+	pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, &rx_mode);
+	rx_mode &= ~(SUNI1x10GEXP_BITMSK_RXXG_PMODE |
+		     SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2,
+		(u16)rx_mode);
+
+	if (t1_rx_mode_promisc(rm)) {
+		/* Promiscuous mode. */
+		rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_PMODE;
+	}
+	if (t1_rx_mode_allmulti(rm)) {
+		/* Accept all multicast. */
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, 0xffff);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, 0xffff);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, 0xffff);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, 0xffff);
+		rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN;
+	} else if (t1_rx_mode_mc_cnt(rm)) {
+		/* Accept one or more multicast(s). */
+		u8 *addr;
+		int bit;
+		u16 mc_filter[4] = { 0, };
+
+		while ((addr = t1_get_next_mcaddr(rm))) {
+			bit = (calc_crc(addr, ETH_ALEN) >> 23) & 0x3f;	/* bit[23:28] */
+			mc_filter[bit >> 4] |= 1 << (bit & 0xf);
+		}
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW, mc_filter[0]);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW, mc_filter[1]);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH, mc_filter[2]);
+		pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH, mc_filter[3]);
+		rx_mode |= SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN;
+	}
+
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2, (u16)rx_mode);
+
+	if (enabled)
+		pm3393_enable(cmac, MAC_DIRECTION_RX);
+
+	return 0;
+}
+
+static int pm3393_get_speed_duplex_fc(struct cmac *cmac, int *speed,
+				      int *duplex, int *fc)
+{
+	if (speed)
+		*speed = SPEED_10000;
+	if (duplex)
+		*duplex = DUPLEX_FULL;
+	if (fc)
+		*fc = cmac->instance->fc;
+	return 0;
+}
+
+static int pm3393_set_speed_duplex_fc(struct cmac *cmac, int speed, int duplex,
+				      int fc)
+{
+	if (speed >= 0 && speed != SPEED_10000)
+		return -1;
+	if (duplex >= 0 && duplex != DUPLEX_FULL)
+		return -1;
+	if (fc & ~(PAUSE_TX | PAUSE_RX))
+		return -1;
+
+	if (fc != cmac->instance->fc) {
+		cmac->instance->fc = (u8) fc;
+		if (cmac->instance->enabled & MAC_DIRECTION_TX)
+			pm3393_enable(cmac, MAC_DIRECTION_TX);
+	}
+	return 0;
+}
+
+#define RMON_UPDATE(mac, name, stat_name) \
+	{ \
+		t1_tpi_read((mac)->adapter, OFFSET(name), &val0);	\
+		t1_tpi_read((mac)->adapter, OFFSET(((name)+1)), &val1); \
+		t1_tpi_read((mac)->adapter, OFFSET(((name)+2)), &val2); \
+		(mac)->stats.stat_name = ((u64)val0 & 0xffff) | \
+						(((u64)val1 & 0xffff) << 16) | \
+						(((u64)val2 & 0xff) << 32) | \
+						((mac)->stats.stat_name & \
+							(~(u64)0 << 40)); \
+		if (ro &	\
+			((name -  SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)) \
+			(mac)->stats.stat_name += ((u64)1 << 40); \
+	}
+
+static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
+							      int flag)
+{
+	u64	ro;
+	u32	val0, val1, val2, val3;
+
+	/* Snap the counters */
+	pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
+		SUNI1x10GEXP_BITMSK_MSTAT_SNAP);
+
+	/* Counter rollover, clear on read */
+	pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0, &val0);
+	pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1, &val1);
+	pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2, &val2);
+	pmread(mac, SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3, &val3);
+	ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) |
+		(((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48);
+
+	/* Rx stats */
+	RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK);
+	RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK);
+	RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK);
+	RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK);
+	RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames);
+	RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors);
+	RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors,
+				RxInternalMACRcvError);
+	RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors);
+	RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors);
+	RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors);
+	RMON_UPDATE(mac, RxJabbers, RxJabberErrors);
+	RMON_UPDATE(mac, RxFragments, RxRuntErrors);
+	RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors);
+
+	/* Tx stats */
+	RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK);
+	RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError,
+				TxInternalMACXmitError);
+	RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors);
+	RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK);
+	RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK);
+	RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK);
+	RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames);
+
+	return &mac->stats;
+}
+
+static int pm3393_macaddress_get(struct cmac *cmac, u8 mac_addr[6])
+{
+	memcpy(mac_addr, cmac->instance->mac_addr, 6);
+	return 0;
+}
+
+static int pm3393_macaddress_set(struct cmac *cmac, u8 ma[6])
+{
+	u32 val, lo, mid, hi, enabled = cmac->instance->enabled;
+
+	/*
+	 * MAC addr: 00:07:43:00:13:09
+	 *
+	 * ma[5] = 0x09
+	 * ma[4] = 0x13
+	 * ma[3] = 0x00
+	 * ma[2] = 0x43
+	 * ma[1] = 0x07
+	 * ma[0] = 0x00
+	 *
+	 * The PM3393 requires byte swapping and reverse order entry
+	 * when programming MAC addresses:
+	 *
+	 * low_bits[15:0]    = ma[1]:ma[0]
+	 * mid_bits[31:16]   = ma[3]:ma[2]
+	 * high_bits[47:32]  = ma[5]:ma[4]
+	 */
+
+	/* Store local copy */
+	memcpy(cmac->instance->mac_addr, ma, 6);
+
+	lo = ((u32) ma[1] << 8) | (u32) ma[0];
+	mid = ((u32) ma[3] << 8) | (u32) ma[2];
+	hi = ((u32) ma[5] << 8) | (u32) ma[4];
+
+	/* Disable Rx/Tx MAC before configuring it. */
+	if (enabled)
+		pm3393_disable(cmac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+
+	/* Set RXXG Station Address */
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_15_0, lo);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_31_16, mid);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_SA_47_32, hi);
+
+	/* Set TXXG Station Address */
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_15_0, lo);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_31_16, mid);
+	pmwrite(cmac, SUNI1x10GEXP_REG_TXXG_SA_47_32, hi);
+
+	/* Setup Exact Match Filter 1 with our MAC address
+	 *
+	 * Must disable exact match filter before configuring it.
+	 */
+	pmread(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, &val);
+	val &= 0xff0f;
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val);
+
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW, lo);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID, mid);
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH, hi);
+
+	val |= 0x0090;
+	pmwrite(cmac, SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0, val);
+
+	if (enabled)
+		pm3393_enable(cmac, enabled);
+	return 0;
+}
+
+static void pm3393_destroy(struct cmac *cmac)
+{
+	kfree(cmac);
+}
+
+static struct cmac_ops pm3393_ops = {
+	.destroy                 = pm3393_destroy,
+	.reset                   = pm3393_reset,
+	.interrupt_enable        = pm3393_interrupt_enable,
+	.interrupt_disable       = pm3393_interrupt_disable,
+	.interrupt_clear         = pm3393_interrupt_clear,
+	.interrupt_handler       = pm3393_interrupt_handler,
+	.enable                  = pm3393_enable_port,
+	.disable                 = pm3393_disable,
+	.loopback_enable         = pm3393_loopback_enable,
+	.loopback_disable        = pm3393_loopback_disable,
+	.set_mtu                 = pm3393_set_mtu,
+	.set_rx_mode             = pm3393_set_rx_mode,
+	.get_speed_duplex_fc     = pm3393_get_speed_duplex_fc,
+	.set_speed_duplex_fc     = pm3393_set_speed_duplex_fc,
+	.statistics_update       = pm3393_update_statistics,
+	.macaddress_get          = pm3393_macaddress_get,
+	.macaddress_set          = pm3393_macaddress_set
+};
+
+static struct cmac *pm3393_mac_create(adapter_t *adapter, int index)
+{
+	struct cmac *cmac;
+
+	cmac = kmalloc(sizeof(*cmac) + sizeof(cmac_instance), GFP_KERNEL);
+	if (!cmac)
+		return NULL;
+	memset(cmac, 0, sizeof(*cmac));
+
+	cmac->ops = &pm3393_ops;
+	cmac->instance = (cmac_instance *) (cmac + 1);
+	cmac->adapter = adapter;
+	cmac->instance->fc = PAUSE_TX | PAUSE_RX;
+
+	t1_tpi_write(adapter, OFFSET(0x0001), 0x00008000);
+	t1_tpi_write(adapter, OFFSET(0x0001), 0x00000000);
+	t1_tpi_write(adapter, OFFSET(0x2308), 0x00009800);
+	t1_tpi_write(adapter, OFFSET(0x2305), 0x00001001);   /* PL4IO Enable */
+	t1_tpi_write(adapter, OFFSET(0x2320), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2321), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2322), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2323), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2324), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2325), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2326), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2327), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2328), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x2329), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232a), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232b), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232c), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232d), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232e), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x232f), 0x00008800);
+	t1_tpi_write(adapter, OFFSET(0x230d), 0x00009c00);
+	t1_tpi_write(adapter, OFFSET(0x2304), 0x00000202);	/* PL4IO Calendar Repetitions */
+
+	t1_tpi_write(adapter, OFFSET(0x3200), 0x00008080);	/* EFLX Enable */
+	t1_tpi_write(adapter, OFFSET(0x3210), 0x00000000);	/* EFLX Channel Deprovision */
+	t1_tpi_write(adapter, OFFSET(0x3203), 0x00000000);	/* EFLX Low Limit */
+	t1_tpi_write(adapter, OFFSET(0x3204), 0x00000040);	/* EFLX High Limit */
+	t1_tpi_write(adapter, OFFSET(0x3205), 0x000002cc);	/* EFLX Almost Full */
+	t1_tpi_write(adapter, OFFSET(0x3206), 0x00000199);	/* EFLX Almost Empty */
+	t1_tpi_write(adapter, OFFSET(0x3207), 0x00000240);	/* EFLX Cut Through Threshold */
+	t1_tpi_write(adapter, OFFSET(0x3202), 0x00000000);	/* EFLX Indirect Register Update */
+	t1_tpi_write(adapter, OFFSET(0x3210), 0x00000001);	/* EFLX Channel Provision */
+	t1_tpi_write(adapter, OFFSET(0x3208), 0x0000ffff);	/* EFLX Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x320a), 0x0000ffff);	/* EFLX Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x320c), 0x0000ffff);	/* EFLX enable overflow interrupt The other bit are undocumented */
+	t1_tpi_write(adapter, OFFSET(0x320e), 0x0000ffff);	/* EFLX Undocumented */
+
+	t1_tpi_write(adapter, OFFSET(0x2200), 0x0000c000);	/* IFLX Configuration - enable */
+	t1_tpi_write(adapter, OFFSET(0x2201), 0x00000000);	/* IFLX Channel Deprovision */
+	t1_tpi_write(adapter, OFFSET(0x220e), 0x00000000);	/* IFLX Low Limit */
+	t1_tpi_write(adapter, OFFSET(0x220f), 0x00000100);	/* IFLX High Limit */
+	t1_tpi_write(adapter, OFFSET(0x2210), 0x00000c00);	/* IFLX Almost Full Limit */
+	t1_tpi_write(adapter, OFFSET(0x2211), 0x00000599);	/* IFLX Almost Empty Limit */
+	t1_tpi_write(adapter, OFFSET(0x220d), 0x00000000);	/* IFLX Indirect Register Update */
+	t1_tpi_write(adapter, OFFSET(0x2201), 0x00000001);	/* IFLX Channel Provision */
+	t1_tpi_write(adapter, OFFSET(0x2203), 0x0000ffff);	/* IFLX Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x2205), 0x0000ffff);	/* IFLX Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x2209), 0x0000ffff);	/* IFLX Enable overflow interrupt.  The other bit are undocumented */
+
+	t1_tpi_write(adapter, OFFSET(0x2241), 0xfffffffe);	/* PL4MOS Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x2242), 0x0000ffff);	/* PL4MOS Undocumented */
+	t1_tpi_write(adapter, OFFSET(0x2243), 0x00000008);	/* PL4MOS Starving Burst Size */
+	t1_tpi_write(adapter, OFFSET(0x2244), 0x00000008);	/* PL4MOS Hungry Burst Size */
+	t1_tpi_write(adapter, OFFSET(0x2245), 0x00000008);	/* PL4MOS Transfer Size */
+	t1_tpi_write(adapter, OFFSET(0x2240), 0x00000005);	/* PL4MOS Disable */
+
+	t1_tpi_write(adapter, OFFSET(0x2280), 0x00002103);	/* PL4ODP Training Repeat and SOP rule */
+	t1_tpi_write(adapter, OFFSET(0x2284), 0x00000000);	/* PL4ODP MAX_T setting */
+
+	t1_tpi_write(adapter, OFFSET(0x3280), 0x00000087);	/* PL4IDU Enable data forward, port state machine. Set ALLOW_NON_ZERO_OLB */
+	t1_tpi_write(adapter, OFFSET(0x3282), 0x0000001f);	/* PL4IDU Enable Dip4 check error interrupts */
+
+	t1_tpi_write(adapter, OFFSET(0x3040), 0x0c32);	/* # TXXG Config */
+	/* For T1 use timer based Mac flow control. */
+	t1_tpi_write(adapter, OFFSET(0x304d), 0x8000);
+	t1_tpi_write(adapter, OFFSET(0x2040), 0x059c);	/* # RXXG Config */
+	t1_tpi_write(adapter, OFFSET(0x2049), 0x0001);	/* # RXXG Cut Through */
+	t1_tpi_write(adapter, OFFSET(0x2070), 0x0000);	/* # Disable promiscuous mode */
+
+	/* Setup Exact Match Filter 0 to allow broadcast packets.
+	 */
+	t1_tpi_write(adapter, OFFSET(0x206e), 0x0000);	/* # Disable Match Enable bit */
+	t1_tpi_write(adapter, OFFSET(0x204a), 0xffff);	/* # low addr */
+	t1_tpi_write(adapter, OFFSET(0x204b), 0xffff);	/* # mid addr */
+	t1_tpi_write(adapter, OFFSET(0x204c), 0xffff);	/* # high addr */
+	t1_tpi_write(adapter, OFFSET(0x206e), 0x0009);	/* # Enable Match Enable bit */
+
+	t1_tpi_write(adapter, OFFSET(0x0003), 0x0000);	/* # NO SOP/ PAD_EN setup */
+	t1_tpi_write(adapter, OFFSET(0x0100), 0x0ff0);	/* # RXEQB disabled */
+	t1_tpi_write(adapter, OFFSET(0x0101), 0x0f0f);	/* # No Preemphasis */
+
+	return cmac;
+}
+
+static int pm3393_mac_reset(adapter_t * adapter)
+{
+	u32 val;
+	u32 x;
+	u32 is_pl4_reset_finished;
+	u32 is_pl4_outof_lock;
+	u32 is_xaui_mabc_pll_locked;
+	u32 successful_reset;
+	int i;
+
+	/* The following steps are required to properly reset
+	 * the PM3393. This information is provided in the
+	 * PM3393 datasheet (Issue 2: November 2002)
+	 * section 13.1 -- Device Reset.
+	 *
+	 * The PM3393 has three types of components that are
+	 * individually reset:
+	 *
+	 * DRESETB      - Digital circuitry
+	 * PL4_ARESETB  - PL4 analog circuitry
+	 * XAUI_ARESETB - XAUI bus analog circuitry
+	 *
+	 * Steps to reset PM3393 using RSTB pin:
+	 *
+	 * 1. Assert RSTB pin low ( write 0 )
+	 * 2. Wait at least 1ms to initiate a complete initialization of device.
+	 * 3. Wait until all external clocks and REFSEL are stable.
+	 * 4. Wait minimum of 1ms. (after external clocks and REFEL are stable)
+	 * 5. De-assert RSTB ( write 1 )
+	 * 6. Wait until internal timers to expires after ~14ms.
+	 *    - Allows analog clock synthesizer(PL4CSU) to stabilize to
+	 *      selected reference frequency before allowing the digital
+	 *      portion of the device to operate.
+	 * 7. Wait at least 200us for XAUI interface to stabilize.
+	 * 8. Verify the PM3393 came out of reset successfully.
+	 *    Set successful reset flag if everything worked else try again
+	 *    a few more times.
+	 */
+
+	successful_reset = 0;
+	for (i = 0; i < 3 && !successful_reset; i++) {
+		/* 1 */
+		t1_tpi_read(adapter, A_ELMER0_GPO, &val);
+		val &= ~1;
+		t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+		/* 2 */
+		msleep(1);
+
+		/* 3 */
+		msleep(1);
+
+		/* 4 */
+		msleep(2 /*1 extra ms for safety */ );
+
+		/* 5 */
+		val |= 1;
+		t1_tpi_write(adapter, A_ELMER0_GPO, val);
+
+		/* 6 */
+		msleep(15 /*1 extra ms for safety */ );
+
+		/* 7 */
+		msleep(1);
+
+		/* 8 */
+
+		/* Has PL4 analog block come out of reset correctly? */
+		t1_tpi_read(adapter, OFFSET(SUNI1x10GEXP_REG_DEVICE_STATUS), &val);
+		is_pl4_reset_finished = (val & SUNI1x10GEXP_BITMSK_TOP_EXPIRED);
+
+		/* TBD XXX SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL gets locked later in the init sequence
+		 *         figure out why? */
+
+		/* Have all PL4 block clocks locked? */
+		x = (SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL
+		     /*| SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL */  |
+		     SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL |
+		     SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL |
+		     SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL);
+		is_pl4_outof_lock = (val & x);
+
+		/* ??? If this fails, might be able to software reset the XAUI part
+		 *     and try to recover... thus saving us from doing another HW reset */
+		/* Has the XAUI MABC PLL circuitry stablized? */
+		is_xaui_mabc_pll_locked =
+		    (val & SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED);
+
+		successful_reset = (is_pl4_reset_finished && !is_pl4_outof_lock
+				    && is_xaui_mabc_pll_locked);
+	}
+	return successful_reset ? 0 : 1;
+}
+
+struct gmac t1_pm3393_ops = {
+	STATS_TICK_SECS,
+	pm3393_mac_create,
+	pm3393_mac_reset
+};
diff --git a/drivers/net/chelsio/regs.h b/drivers/net/chelsio/regs.h
new file mode 100644
index 00000000000..b90e11f40d1
--- /dev/null
+++ b/drivers/net/chelsio/regs.h
@@ -0,0 +1,468 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: regs.h                                                              *
+ * $Revision: 1.8 $                                                          *
+ * $Date: 2005/06/21 18:29:48 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_REGS_H_
+#define _CXGB_REGS_H_
+
+/* SGE registers */
+#define A_SG_CONTROL 0x0
+
+#define S_CMDQ0_ENABLE    0
+#define V_CMDQ0_ENABLE(x) ((x) << S_CMDQ0_ENABLE)
+#define F_CMDQ0_ENABLE    V_CMDQ0_ENABLE(1U)
+
+#define S_CMDQ1_ENABLE    1
+#define V_CMDQ1_ENABLE(x) ((x) << S_CMDQ1_ENABLE)
+#define F_CMDQ1_ENABLE    V_CMDQ1_ENABLE(1U)
+
+#define S_FL0_ENABLE    2
+#define V_FL0_ENABLE(x) ((x) << S_FL0_ENABLE)
+#define F_FL0_ENABLE    V_FL0_ENABLE(1U)
+
+#define S_FL1_ENABLE    3
+#define V_FL1_ENABLE(x) ((x) << S_FL1_ENABLE)
+#define F_FL1_ENABLE    V_FL1_ENABLE(1U)
+
+#define S_CPL_ENABLE    4
+#define V_CPL_ENABLE(x) ((x) << S_CPL_ENABLE)
+#define F_CPL_ENABLE    V_CPL_ENABLE(1U)
+
+#define S_RESPONSE_QUEUE_ENABLE    5
+#define V_RESPONSE_QUEUE_ENABLE(x) ((x) << S_RESPONSE_QUEUE_ENABLE)
+#define F_RESPONSE_QUEUE_ENABLE    V_RESPONSE_QUEUE_ENABLE(1U)
+
+#define S_CMDQ_PRIORITY    6
+#define M_CMDQ_PRIORITY    0x3
+#define V_CMDQ_PRIORITY(x) ((x) << S_CMDQ_PRIORITY)
+#define G_CMDQ_PRIORITY(x) (((x) >> S_CMDQ_PRIORITY) & M_CMDQ_PRIORITY)
+
+#define S_DISABLE_CMDQ1_GTS    9
+#define V_DISABLE_CMDQ1_GTS(x) ((x) << S_DISABLE_CMDQ1_GTS)
+#define F_DISABLE_CMDQ1_GTS    V_DISABLE_CMDQ1_GTS(1U)
+
+#define S_DISABLE_FL0_GTS    10
+#define V_DISABLE_FL0_GTS(x) ((x) << S_DISABLE_FL0_GTS)
+#define F_DISABLE_FL0_GTS    V_DISABLE_FL0_GTS(1U)
+
+#define S_DISABLE_FL1_GTS    11
+#define V_DISABLE_FL1_GTS(x) ((x) << S_DISABLE_FL1_GTS)
+#define F_DISABLE_FL1_GTS    V_DISABLE_FL1_GTS(1U)
+
+#define S_ENABLE_BIG_ENDIAN    12
+#define V_ENABLE_BIG_ENDIAN(x) ((x) << S_ENABLE_BIG_ENDIAN)
+#define F_ENABLE_BIG_ENDIAN    V_ENABLE_BIG_ENDIAN(1U)
+
+#define S_ISCSI_COALESCE    14
+#define V_ISCSI_COALESCE(x) ((x) << S_ISCSI_COALESCE)
+#define F_ISCSI_COALESCE    V_ISCSI_COALESCE(1U)
+
+#define S_RX_PKT_OFFSET    15
+#define V_RX_PKT_OFFSET(x) ((x) << S_RX_PKT_OFFSET)
+
+#define S_VLAN_XTRACT    18
+#define V_VLAN_XTRACT(x) ((x) << S_VLAN_XTRACT)
+#define F_VLAN_XTRACT    V_VLAN_XTRACT(1U)
+
+#define A_SG_DOORBELL 0x4
+#define A_SG_CMD0BASELWR 0x8
+#define A_SG_CMD0BASEUPR 0xc
+#define A_SG_CMD1BASELWR 0x10
+#define A_SG_CMD1BASEUPR 0x14
+#define A_SG_FL0BASELWR 0x18
+#define A_SG_FL0BASEUPR 0x1c
+#define A_SG_FL1BASELWR 0x20
+#define A_SG_FL1BASEUPR 0x24
+#define A_SG_CMD0SIZE 0x28
+#define A_SG_FL0SIZE 0x2c
+#define A_SG_RSPSIZE 0x30
+#define A_SG_RSPBASELWR 0x34
+#define A_SG_RSPBASEUPR 0x38
+#define A_SG_FLTHRESHOLD 0x3c
+#define A_SG_RSPQUEUECREDIT 0x40
+#define A_SG_SLEEPING 0x48
+#define A_SG_INTRTIMER 0x4c
+#define A_SG_CMD1SIZE 0xb0
+#define A_SG_FL1SIZE 0xb4
+#define A_SG_INT_ENABLE 0xb8
+
+#define S_RESPQ_EXHAUSTED    0
+#define V_RESPQ_EXHAUSTED(x) ((x) << S_RESPQ_EXHAUSTED)
+#define F_RESPQ_EXHAUSTED    V_RESPQ_EXHAUSTED(1U)
+
+#define S_RESPQ_OVERFLOW    1
+#define V_RESPQ_OVERFLOW(x) ((x) << S_RESPQ_OVERFLOW)
+#define F_RESPQ_OVERFLOW    V_RESPQ_OVERFLOW(1U)
+
+#define S_FL_EXHAUSTED    2
+#define V_FL_EXHAUSTED(x) ((x) << S_FL_EXHAUSTED)
+#define F_FL_EXHAUSTED    V_FL_EXHAUSTED(1U)
+
+#define S_PACKET_TOO_BIG    3
+#define V_PACKET_TOO_BIG(x) ((x) << S_PACKET_TOO_BIG)
+#define F_PACKET_TOO_BIG    V_PACKET_TOO_BIG(1U)
+
+#define S_PACKET_MISMATCH    4
+#define V_PACKET_MISMATCH(x) ((x) << S_PACKET_MISMATCH)
+#define F_PACKET_MISMATCH    V_PACKET_MISMATCH(1U)
+
+#define A_SG_INT_CAUSE 0xbc
+#define A_SG_RESPACCUTIMER 0xc0
+
+/* MC3 registers */
+
+#define S_READY    1
+#define V_READY(x) ((x) << S_READY)
+#define F_READY    V_READY(1U)
+
+/* MC4 registers */
+
+#define A_MC4_CFG 0x180
+#define S_MC4_SLOW    25
+#define V_MC4_SLOW(x) ((x) << S_MC4_SLOW)
+#define F_MC4_SLOW    V_MC4_SLOW(1U)
+
+/* TPI registers */
+
+#define A_TPI_ADDR 0x280
+#define A_TPI_WR_DATA 0x284
+#define A_TPI_RD_DATA 0x288
+#define A_TPI_CSR 0x28c
+
+#define S_TPIWR    0
+#define V_TPIWR(x) ((x) << S_TPIWR)
+#define F_TPIWR    V_TPIWR(1U)
+
+#define S_TPIRDY    1
+#define V_TPIRDY(x) ((x) << S_TPIRDY)
+#define F_TPIRDY    V_TPIRDY(1U)
+
+#define A_TPI_PAR 0x29c
+
+#define S_TPIPAR    0
+#define M_TPIPAR    0x7f
+#define V_TPIPAR(x) ((x) << S_TPIPAR)
+#define G_TPIPAR(x) (((x) >> S_TPIPAR) & M_TPIPAR)
+
+/* TP registers */
+
+#define A_TP_IN_CONFIG 0x300
+
+#define S_TP_IN_CSPI_CPL    3
+#define V_TP_IN_CSPI_CPL(x) ((x) << S_TP_IN_CSPI_CPL)
+#define F_TP_IN_CSPI_CPL    V_TP_IN_CSPI_CPL(1U)
+
+#define S_TP_IN_CSPI_CHECK_IP_CSUM    5
+#define V_TP_IN_CSPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_IP_CSUM)
+#define F_TP_IN_CSPI_CHECK_IP_CSUM    V_TP_IN_CSPI_CHECK_IP_CSUM(1U)
+
+#define S_TP_IN_CSPI_CHECK_TCP_CSUM    6
+#define V_TP_IN_CSPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_CSPI_CHECK_TCP_CSUM)
+#define F_TP_IN_CSPI_CHECK_TCP_CSUM    V_TP_IN_CSPI_CHECK_TCP_CSUM(1U)
+
+#define S_TP_IN_ESPI_ETHERNET    8
+#define V_TP_IN_ESPI_ETHERNET(x) ((x) << S_TP_IN_ESPI_ETHERNET)
+#define F_TP_IN_ESPI_ETHERNET    V_TP_IN_ESPI_ETHERNET(1U)
+
+#define S_TP_IN_ESPI_CHECK_IP_CSUM    12
+#define V_TP_IN_ESPI_CHECK_IP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_IP_CSUM)
+#define F_TP_IN_ESPI_CHECK_IP_CSUM    V_TP_IN_ESPI_CHECK_IP_CSUM(1U)
+
+#define S_TP_IN_ESPI_CHECK_TCP_CSUM    13
+#define V_TP_IN_ESPI_CHECK_TCP_CSUM(x) ((x) << S_TP_IN_ESPI_CHECK_TCP_CSUM)
+#define F_TP_IN_ESPI_CHECK_TCP_CSUM    V_TP_IN_ESPI_CHECK_TCP_CSUM(1U)
+
+#define S_OFFLOAD_DISABLE    14
+#define V_OFFLOAD_DISABLE(x) ((x) << S_OFFLOAD_DISABLE)
+#define F_OFFLOAD_DISABLE    V_OFFLOAD_DISABLE(1U)
+
+#define A_TP_OUT_CONFIG 0x304
+
+#define S_TP_OUT_CSPI_CPL    2
+#define V_TP_OUT_CSPI_CPL(x) ((x) << S_TP_OUT_CSPI_CPL)
+#define F_TP_OUT_CSPI_CPL    V_TP_OUT_CSPI_CPL(1U)
+
+#define S_TP_OUT_ESPI_ETHERNET    6
+#define V_TP_OUT_ESPI_ETHERNET(x) ((x) << S_TP_OUT_ESPI_ETHERNET)
+#define F_TP_OUT_ESPI_ETHERNET    V_TP_OUT_ESPI_ETHERNET(1U)
+
+#define S_TP_OUT_ESPI_GENERATE_IP_CSUM    10
+#define V_TP_OUT_ESPI_GENERATE_IP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_IP_CSUM)
+#define F_TP_OUT_ESPI_GENERATE_IP_CSUM    V_TP_OUT_ESPI_GENERATE_IP_CSUM(1U)
+
+#define S_TP_OUT_ESPI_GENERATE_TCP_CSUM    11
+#define V_TP_OUT_ESPI_GENERATE_TCP_CSUM(x) ((x) << S_TP_OUT_ESPI_GENERATE_TCP_CSUM)
+#define F_TP_OUT_ESPI_GENERATE_TCP_CSUM    V_TP_OUT_ESPI_GENERATE_TCP_CSUM(1U)
+
+#define A_TP_GLOBAL_CONFIG 0x308
+
+#define S_IP_TTL    0
+#define M_IP_TTL    0xff
+#define V_IP_TTL(x) ((x) << S_IP_TTL)
+
+#define S_TCP_CSUM    11
+#define V_TCP_CSUM(x) ((x) << S_TCP_CSUM)
+#define F_TCP_CSUM    V_TCP_CSUM(1U)
+
+#define S_UDP_CSUM    12
+#define V_UDP_CSUM(x) ((x) << S_UDP_CSUM)
+#define F_UDP_CSUM    V_UDP_CSUM(1U)
+
+#define S_IP_CSUM    13
+#define V_IP_CSUM(x) ((x) << S_IP_CSUM)
+#define F_IP_CSUM    V_IP_CSUM(1U)
+
+#define S_PATH_MTU    15
+#define V_PATH_MTU(x) ((x) << S_PATH_MTU)
+#define F_PATH_MTU    V_PATH_MTU(1U)
+
+#define S_5TUPLE_LOOKUP    17
+#define V_5TUPLE_LOOKUP(x) ((x) << S_5TUPLE_LOOKUP)
+
+#define S_SYN_COOKIE_PARAMETER    26
+#define V_SYN_COOKIE_PARAMETER(x) ((x) << S_SYN_COOKIE_PARAMETER)
+
+#define A_TP_PC_CONFIG 0x348
+#define S_DIS_TX_FILL_WIN_PUSH    12
+#define V_DIS_TX_FILL_WIN_PUSH(x) ((x) << S_DIS_TX_FILL_WIN_PUSH)
+#define F_DIS_TX_FILL_WIN_PUSH    V_DIS_TX_FILL_WIN_PUSH(1U)
+
+#define S_TP_PC_REV    30
+#define M_TP_PC_REV    0x3
+#define G_TP_PC_REV(x) (((x) >> S_TP_PC_REV) & M_TP_PC_REV)
+#define A_TP_RESET 0x44c
+#define S_TP_RESET    0
+#define V_TP_RESET(x) ((x) << S_TP_RESET)
+#define F_TP_RESET    V_TP_RESET(1U)
+
+#define A_TP_INT_ENABLE 0x470
+#define A_TP_INT_CAUSE 0x474
+#define A_TP_TX_DROP_CONFIG 0x4b8
+
+#define S_ENABLE_TX_DROP    31
+#define V_ENABLE_TX_DROP(x) ((x) << S_ENABLE_TX_DROP)
+#define F_ENABLE_TX_DROP    V_ENABLE_TX_DROP(1U)
+
+#define S_ENABLE_TX_ERROR    30
+#define V_ENABLE_TX_ERROR(x) ((x) << S_ENABLE_TX_ERROR)
+#define F_ENABLE_TX_ERROR    V_ENABLE_TX_ERROR(1U)
+
+#define S_DROP_TICKS_CNT    4
+#define V_DROP_TICKS_CNT(x) ((x) << S_DROP_TICKS_CNT)
+
+#define S_NUM_PKTS_DROPPED    0
+#define V_NUM_PKTS_DROPPED(x) ((x) << S_NUM_PKTS_DROPPED)
+
+/* CSPI registers */
+
+#define S_DIP4ERR    0
+#define V_DIP4ERR(x) ((x) << S_DIP4ERR)
+#define F_DIP4ERR    V_DIP4ERR(1U)
+
+#define S_RXDROP    1
+#define V_RXDROP(x) ((x) << S_RXDROP)
+#define F_RXDROP    V_RXDROP(1U)
+
+#define S_TXDROP    2
+#define V_TXDROP(x) ((x) << S_TXDROP)
+#define F_TXDROP    V_TXDROP(1U)
+
+#define S_RXOVERFLOW    3
+#define V_RXOVERFLOW(x) ((x) << S_RXOVERFLOW)
+#define F_RXOVERFLOW    V_RXOVERFLOW(1U)
+
+#define S_RAMPARITYERR    4
+#define V_RAMPARITYERR(x) ((x) << S_RAMPARITYERR)
+#define F_RAMPARITYERR    V_RAMPARITYERR(1U)
+
+/* ESPI registers */
+
+#define A_ESPI_SCH_TOKEN0 0x880
+#define A_ESPI_SCH_TOKEN1 0x884
+#define A_ESPI_SCH_TOKEN2 0x888
+#define A_ESPI_SCH_TOKEN3 0x88c
+#define A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK 0x890
+#define A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK 0x894
+#define A_ESPI_CALENDAR_LENGTH 0x898
+#define A_PORT_CONFIG 0x89c
+
+#define S_RX_NPORTS    0
+#define V_RX_NPORTS(x) ((x) << S_RX_NPORTS)
+
+#define S_TX_NPORTS    8
+#define V_TX_NPORTS(x) ((x) << S_TX_NPORTS)
+
+#define A_ESPI_FIFO_STATUS_ENABLE 0x8a0
+
+#define S_RXSTATUSENABLE    0
+#define V_RXSTATUSENABLE(x) ((x) << S_RXSTATUSENABLE)
+#define F_RXSTATUSENABLE    V_RXSTATUSENABLE(1U)
+
+#define S_INTEL1010MODE    4
+#define V_INTEL1010MODE(x) ((x) << S_INTEL1010MODE)
+#define F_INTEL1010MODE    V_INTEL1010MODE(1U)
+
+#define A_ESPI_MAXBURST1_MAXBURST2 0x8a8
+#define A_ESPI_TRAIN 0x8ac
+#define A_ESPI_INTR_STATUS 0x8c8
+
+#define S_DIP2PARITYERR    5
+#define V_DIP2PARITYERR(x) ((x) << S_DIP2PARITYERR)
+#define F_DIP2PARITYERR    V_DIP2PARITYERR(1U)
+
+#define A_ESPI_INTR_ENABLE 0x8cc
+#define A_RX_DROP_THRESHOLD 0x8d0
+#define A_ESPI_RX_RESET 0x8ec
+#define A_ESPI_MISC_CONTROL 0x8f0
+
+#define S_OUT_OF_SYNC_COUNT    0
+#define V_OUT_OF_SYNC_COUNT(x) ((x) << S_OUT_OF_SYNC_COUNT)
+
+#define S_DIP2_PARITY_ERR_THRES    5
+#define V_DIP2_PARITY_ERR_THRES(x) ((x) << S_DIP2_PARITY_ERR_THRES)
+
+#define S_DIP4_THRES    9
+#define V_DIP4_THRES(x) ((x) << S_DIP4_THRES)
+
+#define S_MONITORED_PORT_NUM    25
+#define V_MONITORED_PORT_NUM(x) ((x) << S_MONITORED_PORT_NUM)
+
+#define S_MONITORED_DIRECTION    27
+#define V_MONITORED_DIRECTION(x) ((x) << S_MONITORED_DIRECTION)
+#define F_MONITORED_DIRECTION    V_MONITORED_DIRECTION(1U)
+
+#define S_MONITORED_INTERFACE    28
+#define V_MONITORED_INTERFACE(x) ((x) << S_MONITORED_INTERFACE)
+#define F_MONITORED_INTERFACE    V_MONITORED_INTERFACE(1U)
+
+#define A_ESPI_DIP2_ERR_COUNT 0x8f4
+#define A_ESPI_CMD_ADDR 0x8f8
+
+#define S_WRITE_DATA    0
+#define V_WRITE_DATA(x) ((x) << S_WRITE_DATA)
+
+#define S_REGISTER_OFFSET    8
+#define V_REGISTER_OFFSET(x) ((x) << S_REGISTER_OFFSET)
+
+#define S_CHANNEL_ADDR    12
+#define V_CHANNEL_ADDR(x) ((x) << S_CHANNEL_ADDR)
+
+#define S_MODULE_ADDR    16
+#define V_MODULE_ADDR(x) ((x) << S_MODULE_ADDR)
+
+#define S_BUNDLE_ADDR    20
+#define V_BUNDLE_ADDR(x) ((x) << S_BUNDLE_ADDR)
+
+#define S_SPI4_COMMAND    24
+#define V_SPI4_COMMAND(x) ((x) << S_SPI4_COMMAND)
+
+#define A_ESPI_GOSTAT 0x8fc
+#define S_ESPI_CMD_BUSY    8
+#define V_ESPI_CMD_BUSY(x) ((x) << S_ESPI_CMD_BUSY)
+#define F_ESPI_CMD_BUSY    V_ESPI_CMD_BUSY(1U)
+
+/* PL registers */
+
+#define A_PL_ENABLE 0xa00
+
+#define S_PL_INTR_SGE_ERR    0
+#define V_PL_INTR_SGE_ERR(x) ((x) << S_PL_INTR_SGE_ERR)
+#define F_PL_INTR_SGE_ERR    V_PL_INTR_SGE_ERR(1U)
+
+#define S_PL_INTR_SGE_DATA    1
+#define V_PL_INTR_SGE_DATA(x) ((x) << S_PL_INTR_SGE_DATA)
+#define F_PL_INTR_SGE_DATA    V_PL_INTR_SGE_DATA(1U)
+
+#define S_PL_INTR_TP    6
+#define V_PL_INTR_TP(x) ((x) << S_PL_INTR_TP)
+#define F_PL_INTR_TP    V_PL_INTR_TP(1U)
+
+#define S_PL_INTR_ESPI    8
+#define V_PL_INTR_ESPI(x) ((x) << S_PL_INTR_ESPI)
+#define F_PL_INTR_ESPI    V_PL_INTR_ESPI(1U)
+
+#define S_PL_INTR_PCIX    10
+#define V_PL_INTR_PCIX(x) ((x) << S_PL_INTR_PCIX)
+#define F_PL_INTR_PCIX    V_PL_INTR_PCIX(1U)
+
+#define S_PL_INTR_EXT    11
+#define V_PL_INTR_EXT(x) ((x) << S_PL_INTR_EXT)
+#define F_PL_INTR_EXT    V_PL_INTR_EXT(1U)
+
+#define A_PL_CAUSE 0xa04
+
+/* MC5 registers */
+
+#define A_MC5_CONFIG 0xc04
+
+#define S_TCAM_RESET    1
+#define V_TCAM_RESET(x) ((x) << S_TCAM_RESET)
+#define F_TCAM_RESET    V_TCAM_RESET(1U)
+
+#define S_M_BUS_ENABLE    5
+#define V_M_BUS_ENABLE(x) ((x) << S_M_BUS_ENABLE)
+#define F_M_BUS_ENABLE    V_M_BUS_ENABLE(1U)
+
+/* PCICFG registers */
+
+#define A_PCICFG_PM_CSR 0x44
+#define A_PCICFG_VPD_ADDR 0x4a
+
+#define S_VPD_OP_FLAG    15
+#define V_VPD_OP_FLAG(x) ((x) << S_VPD_OP_FLAG)
+#define F_VPD_OP_FLAG    V_VPD_OP_FLAG(1U)
+
+#define A_PCICFG_VPD_DATA 0x4c
+
+#define A_PCICFG_INTR_ENABLE 0xf4
+#define A_PCICFG_INTR_CAUSE 0xf8
+
+#define A_PCICFG_MODE 0xfc
+
+#define S_PCI_MODE_64BIT    0
+#define V_PCI_MODE_64BIT(x) ((x) << S_PCI_MODE_64BIT)
+#define F_PCI_MODE_64BIT    V_PCI_MODE_64BIT(1U)
+
+#define S_PCI_MODE_PCIX    5
+#define V_PCI_MODE_PCIX(x) ((x) << S_PCI_MODE_PCIX)
+#define F_PCI_MODE_PCIX    V_PCI_MODE_PCIX(1U)
+
+#define S_PCI_MODE_CLK    6
+#define M_PCI_MODE_CLK    0x3
+#define G_PCI_MODE_CLK(x) (((x) >> S_PCI_MODE_CLK) & M_PCI_MODE_CLK)
+
+#endif /* _CXGB_REGS_H_ */
diff --git a/drivers/net/chelsio/sge.c b/drivers/net/chelsio/sge.c
new file mode 100644
index 00000000000..53b41d99b00
--- /dev/null
+++ b/drivers/net/chelsio/sge.c
@@ -0,0 +1,1684 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: sge.c                                                               *
+ * $Revision: 1.26 $                                                         *
+ * $Date: 2005/06/21 18:29:48 $                                              *
+ * Description:                                                              *
+ *  DMA engine.                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "common.h"
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/skbuff.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/ip.h>
+#include <linux/in.h>
+#include <linux/if_arp.h>
+
+#include "cpl5_cmd.h"
+#include "sge.h"
+#include "regs.h"
+#include "espi.h"
+
+
+#ifdef NETIF_F_TSO
+#include <linux/tcp.h>
+#endif
+
+#define SGE_CMDQ_N		2
+#define SGE_FREELQ_N		2
+#define SGE_CMDQ0_E_N		1024
+#define SGE_CMDQ1_E_N		128
+#define SGE_FREEL_SIZE		4096
+#define SGE_JUMBO_FREEL_SIZE	512
+#define SGE_FREEL_REFILL_THRESH	16
+#define SGE_RESPQ_E_N		1024
+#define SGE_INTRTIMER_NRES	1000
+#define SGE_RX_COPY_THRES	256
+#define SGE_RX_SM_BUF_SIZE	1536
+
+# define SGE_RX_DROP_THRES 2
+
+#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4)
+
+/*
+ * Period of the TX buffer reclaim timer.  This timer does not need to run
+ * frequently as TX buffers are usually reclaimed by new TX packets.
+ */
+#define TX_RECLAIM_PERIOD (HZ / 4)
+
+#ifndef NET_IP_ALIGN
+# define NET_IP_ALIGN 2
+#endif
+
+#define M_CMD_LEN       0x7fffffff
+#define V_CMD_LEN(v)    (v)
+#define G_CMD_LEN(v)    ((v) & M_CMD_LEN)
+#define V_CMD_GEN1(v)   ((v) << 31)
+#define V_CMD_GEN2(v)   (v)
+#define F_CMD_DATAVALID (1 << 1)
+#define F_CMD_SOP       (1 << 2)
+#define V_CMD_EOP(v)    ((v) << 3)
+
+/*
+ * Command queue, receive buffer list, and response queue descriptors.
+ */
+#if defined(__BIG_ENDIAN_BITFIELD)
+struct cmdQ_e {
+	u32 addr_lo;
+	u32 len_gen;
+	u32 flags;
+	u32 addr_hi;
+};
+
+struct freelQ_e {
+	u32 addr_lo;
+	u32 len_gen;
+	u32 gen2;
+	u32 addr_hi;
+};
+
+struct respQ_e {
+	u32 Qsleeping		: 4;
+	u32 Cmdq1CreditReturn	: 5;
+	u32 Cmdq1DmaComplete	: 5;
+	u32 Cmdq0CreditReturn	: 5;
+	u32 Cmdq0DmaComplete	: 5;
+	u32 FreelistQid		: 2;
+	u32 CreditValid		: 1;
+	u32 DataValid		: 1;
+	u32 Offload		: 1;
+	u32 Eop			: 1;
+	u32 Sop			: 1;
+	u32 GenerationBit	: 1;
+	u32 BufferLength;
+};
+#elif defined(__LITTLE_ENDIAN_BITFIELD)
+struct cmdQ_e {
+	u32 len_gen;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 flags;
+};
+
+struct freelQ_e {
+	u32 len_gen;
+	u32 addr_lo;
+	u32 addr_hi;
+	u32 gen2;
+};
+
+struct respQ_e {
+	u32 BufferLength;
+	u32 GenerationBit	: 1;
+	u32 Sop			: 1;
+	u32 Eop			: 1;
+	u32 Offload		: 1;
+	u32 DataValid		: 1;
+	u32 CreditValid		: 1;
+	u32 FreelistQid		: 2;
+	u32 Cmdq0DmaComplete	: 5;
+	u32 Cmdq0CreditReturn	: 5;
+	u32 Cmdq1DmaComplete	: 5;
+	u32 Cmdq1CreditReturn	: 5;
+	u32 Qsleeping		: 4;
+} ;
+#endif
+
+/*
+ * SW Context Command and Freelist Queue Descriptors
+ */
+struct cmdQ_ce {
+	struct sk_buff *skb;
+	DECLARE_PCI_UNMAP_ADDR(dma_addr);
+	DECLARE_PCI_UNMAP_LEN(dma_len);
+};
+
+struct freelQ_ce {
+	struct sk_buff *skb;
+	DECLARE_PCI_UNMAP_ADDR(dma_addr);
+	DECLARE_PCI_UNMAP_LEN(dma_len);
+};
+
+/*
+ * SW command, freelist and response rings
+ */
+struct cmdQ {
+	unsigned long   status;         /* HW DMA fetch status */
+	unsigned int    in_use;         /* # of in-use command descriptors */
+	unsigned int	size;	        /* # of descriptors */
+	unsigned int	processed;      /* total # of descs HW has processed */
+	unsigned int	cleaned;        /* total # of descs SW has reclaimed */
+	unsigned int	stop_thres;     /* SW TX queue suspend threshold */
+	u16		pidx;           /* producer index (SW) */
+	u16		cidx;           /* consumer index (HW) */
+	u8		genbit;         /* current generation (=valid) bit */
+	u8		sop;            /* is next entry start of packet? */
+	struct cmdQ_e  *entries;        /* HW command descriptor Q */
+	struct cmdQ_ce *centries;       /* SW command context descriptor Q */
+	spinlock_t	lock;           /* Lock to protect cmdQ enqueuing */
+	dma_addr_t	dma_addr;       /* DMA addr HW command descriptor Q */
+};
+
+struct freelQ {
+	unsigned int	credits;        /* # of available RX buffers */
+	unsigned int	size;	        /* free list capacity */
+	u16		pidx;           /* producer index (SW) */
+	u16		cidx;           /* consumer index (HW) */
+	u16		rx_buffer_size; /* Buffer size on this free list */
+	u16		dma_offset;     /* DMA offset to align IP headers */
+	u16		recycleq_idx;   /* skb recycle q to use */
+	u8		genbit;	        /* current generation (=valid) bit */
+	struct freelQ_e	*entries;       /* HW freelist descriptor Q */
+	struct freelQ_ce *centries;     /* SW freelist context descriptor Q */
+	dma_addr_t	dma_addr;       /* DMA addr HW freelist descriptor Q */
+};
+
+struct respQ {
+	unsigned int	credits;        /* credits to be returned to SGE */
+	unsigned int	size;	        /* # of response Q descriptors */
+	u16		cidx;	        /* consumer index (SW) */
+	u8		genbit;	        /* current generation(=valid) bit */
+	struct respQ_e *entries;        /* HW response descriptor Q */
+	dma_addr_t	dma_addr;       /* DMA addr HW response descriptor Q */
+};
+
+/* Bit flags for cmdQ.status */
+enum {
+	CMDQ_STAT_RUNNING = 1,          /* fetch engine is running */
+	CMDQ_STAT_LAST_PKT_DB = 2       /* last packet rung the doorbell */
+};
+
+/*
+ * Main SGE data structure
+ *
+ * Interrupts are handled by a single CPU and it is likely that on a MP system
+ * the application is migrated to another CPU. In that scenario, we try to
+ * seperate the RX(in irq context) and TX state in order to decrease memory
+ * contention.
+ */
+struct sge {
+	struct adapter *adapter; 	/* adapter backpointer */
+	struct net_device *netdev;      /* netdevice backpointer */
+	struct freelQ 	freelQ[SGE_FREELQ_N]; /* buffer free lists */
+	struct respQ 	respQ;		/* response Q */
+	unsigned long   stopped_tx_queues; /* bitmap of suspended Tx queues */
+	unsigned int	rx_pkt_pad;     /* RX padding for L2 packets */
+	unsigned int	jumbo_fl;       /* jumbo freelist Q index */
+	unsigned int	intrtimer_nres;	/* no-resource interrupt timer */
+	unsigned int	fixed_intrtimer;/* non-adaptive interrupt timer */
+	struct timer_list tx_reclaim_timer; /* reclaims TX buffers */
+	struct timer_list espibug_timer;
+	unsigned int	espibug_timeout;
+	struct sk_buff	*espibug_skb;
+	u32		sge_control;	/* shadow value of sge control reg */
+	struct sge_intr_counts stats;
+	struct sge_port_stats port_stats[MAX_NPORTS];
+	struct cmdQ cmdQ[SGE_CMDQ_N] ____cacheline_aligned_in_smp;
+};
+
+/*
+ * PIO to indicate that memory mapped Q contains valid descriptor(s).
+ */
+static inline void doorbell_pio(struct adapter *adapter, u32 val)
+{
+	wmb();
+	writel(val, adapter->regs + A_SG_DOORBELL);
+}
+
+/*
+ * Frees all RX buffers on the freelist Q. The caller must make sure that
+ * the SGE is turned off before calling this function.
+ */
+static void free_freelQ_buffers(struct pci_dev *pdev, struct freelQ *q)
+{
+	unsigned int cidx = q->cidx;
+
+	while (q->credits--) {
+		struct freelQ_ce *ce = &q->centries[cidx];
+
+		pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+				 pci_unmap_len(ce, dma_len),
+				 PCI_DMA_FROMDEVICE);
+		dev_kfree_skb(ce->skb);
+		ce->skb = NULL;
+		if (++cidx == q->size)
+			cidx = 0;
+	}
+}
+
+/*
+ * Free RX free list and response queue resources.
+ */
+static void free_rx_resources(struct sge *sge)
+{
+	struct pci_dev *pdev = sge->adapter->pdev;
+	unsigned int size, i;
+
+	if (sge->respQ.entries) {
+		size = sizeof(struct respQ_e) * sge->respQ.size;
+		pci_free_consistent(pdev, size, sge->respQ.entries,
+				    sge->respQ.dma_addr);
+	}
+
+	for (i = 0; i < SGE_FREELQ_N; i++) {
+		struct freelQ *q = &sge->freelQ[i];
+
+		if (q->centries) {
+			free_freelQ_buffers(pdev, q);
+			kfree(q->centries);
+		}
+		if (q->entries) {
+			size = sizeof(struct freelQ_e) * q->size;
+			pci_free_consistent(pdev, size, q->entries,
+					    q->dma_addr);
+		}
+	}
+}
+
+/*
+ * Allocates basic RX resources, consisting of memory mapped freelist Qs and a
+ * response queue.
+ */
+static int alloc_rx_resources(struct sge *sge, struct sge_params *p)
+{
+	struct pci_dev *pdev = sge->adapter->pdev;
+	unsigned int size, i;
+
+	for (i = 0; i < SGE_FREELQ_N; i++) {
+		struct freelQ *q = &sge->freelQ[i];
+
+		q->genbit = 1;
+		q->size = p->freelQ_size[i];
+		q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN;
+		size = sizeof(struct freelQ_e) * q->size;
+		q->entries = (struct freelQ_e *)
+			      pci_alloc_consistent(pdev, size, &q->dma_addr);
+		if (!q->entries)
+			goto err_no_mem;
+		memset(q->entries, 0, size);
+		size = sizeof(struct freelQ_ce) * q->size;
+		q->centries = kmalloc(size, GFP_KERNEL);
+		if (!q->centries)
+			goto err_no_mem;
+		memset(q->centries, 0, size);
+	}
+
+	/*
+	 * Calculate the buffer sizes for the two free lists.  FL0 accommodates
+	 * regular sized Ethernet frames, FL1 is sized not to exceed 16K,
+	 * including all the sk_buff overhead.
+	 *
+	 * Note: For T2 FL0 and FL1 are reversed.
+	 */
+	sge->freelQ[!sge->jumbo_fl].rx_buffer_size = SGE_RX_SM_BUF_SIZE +
+		sizeof(struct cpl_rx_data) +
+		sge->freelQ[!sge->jumbo_fl].dma_offset;
+	sge->freelQ[sge->jumbo_fl].rx_buffer_size = (16 * 1024) -
+		SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+	/*
+	 * Setup which skb recycle Q should be used when recycling buffers from
+	 * each free list.
+	 */
+	sge->freelQ[!sge->jumbo_fl].recycleq_idx = 0;
+	sge->freelQ[sge->jumbo_fl].recycleq_idx = 1;
+
+	sge->respQ.genbit = 1;
+	sge->respQ.size = SGE_RESPQ_E_N;
+	sge->respQ.credits = 0;
+	size = sizeof(struct respQ_e) * sge->respQ.size;
+	sge->respQ.entries = (struct respQ_e *)
+		pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr);
+	if (!sge->respQ.entries)
+		goto err_no_mem;
+	memset(sge->respQ.entries, 0, size);
+	return 0;
+
+err_no_mem:
+	free_rx_resources(sge);
+	return -ENOMEM;
+}
+
+/*
+ * Reclaims n TX descriptors and frees the buffers associated with them.
+ */
+static void free_cmdQ_buffers(struct sge *sge, struct cmdQ *q, unsigned int n)
+{
+	struct cmdQ_ce *ce;
+	struct pci_dev *pdev = sge->adapter->pdev;
+	unsigned int cidx = q->cidx;
+
+	q->in_use -= n;
+	ce = &q->centries[cidx];
+	while (n--) {
+		if (q->sop)
+			pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+			 		 pci_unmap_len(ce, dma_len),
+					 PCI_DMA_TODEVICE);
+		else
+			pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr),
+			 	       pci_unmap_len(ce, dma_len),
+				       PCI_DMA_TODEVICE);
+		q->sop = 0;
+		if (ce->skb) {
+			dev_kfree_skb(ce->skb);
+			q->sop = 1;
+		}
+		ce++;
+		if (++cidx == q->size) {
+			cidx = 0;
+			ce = q->centries;
+		}
+	}
+	q->cidx = cidx;
+}
+
+/*
+ * Free TX resources.
+ *
+ * Assumes that SGE is stopped and all interrupts are disabled.
+ */
+static void free_tx_resources(struct sge *sge)
+{
+	struct pci_dev *pdev = sge->adapter->pdev;
+	unsigned int size, i;
+
+	for (i = 0; i < SGE_CMDQ_N; i++) {
+		struct cmdQ *q = &sge->cmdQ[i];
+
+		if (q->centries) {
+			if (q->in_use)
+				free_cmdQ_buffers(sge, q, q->in_use);
+			kfree(q->centries);
+		}
+		if (q->entries) {
+			size = sizeof(struct cmdQ_e) * q->size;
+			pci_free_consistent(pdev, size, q->entries,
+					    q->dma_addr);
+		}
+	}
+}
+
+/*
+ * Allocates basic TX resources, consisting of memory mapped command Qs.
+ */
+static int alloc_tx_resources(struct sge *sge, struct sge_params *p)
+{
+	struct pci_dev *pdev = sge->adapter->pdev;
+	unsigned int size, i;
+
+	for (i = 0; i < SGE_CMDQ_N; i++) {
+		struct cmdQ *q = &sge->cmdQ[i];
+
+		q->genbit = 1;
+		q->sop = 1;
+		q->size = p->cmdQ_size[i];
+		q->in_use = 0;
+		q->status = 0;
+		q->processed = q->cleaned = 0;
+		q->stop_thres = 0;
+		spin_lock_init(&q->lock);
+		size = sizeof(struct cmdQ_e) * q->size;
+		q->entries = (struct cmdQ_e *)
+			      pci_alloc_consistent(pdev, size, &q->dma_addr);
+		if (!q->entries)
+			goto err_no_mem;
+		memset(q->entries, 0, size);
+		size = sizeof(struct cmdQ_ce) * q->size;
+		q->centries = kmalloc(size, GFP_KERNEL);
+		if (!q->centries)
+			goto err_no_mem;
+		memset(q->centries, 0, size);
+	}
+
+	/*
+	 * CommandQ 0 handles Ethernet and TOE packets, while queue 1 is TOE
+	 * only.  For queue 0 set the stop threshold so we can handle one more
+	 * packet from each port, plus reserve an additional 24 entries for
+	 * Ethernet packets only.  Queue 1 never suspends nor do we reserve
+	 * space for Ethernet packets.
+	 */
+	sge->cmdQ[0].stop_thres = sge->adapter->params.nports *
+		(MAX_SKB_FRAGS + 1);
+	return 0;
+
+err_no_mem:
+	free_tx_resources(sge);
+	return -ENOMEM;
+}
+
+static inline void setup_ring_params(struct adapter *adapter, u64 addr,
+				     u32 size, int base_reg_lo,
+				     int base_reg_hi, int size_reg)
+{
+	writel((u32)addr, adapter->regs + base_reg_lo);
+	writel(addr >> 32, adapter->regs + base_reg_hi);
+	writel(size, adapter->regs + size_reg);
+}
+
+/*
+ * Enable/disable VLAN acceleration.
+ */
+void t1_set_vlan_accel(struct adapter *adapter, int on_off)
+{
+	struct sge *sge = adapter->sge;
+
+	sge->sge_control &= ~F_VLAN_XTRACT;
+	if (on_off)
+		sge->sge_control |= F_VLAN_XTRACT;
+	if (adapter->open_device_map) {
+		writel(sge->sge_control, adapter->regs + A_SG_CONTROL);
+		readl(adapter->regs + A_SG_CONTROL); /* flush */
+	}
+}
+
+/*
+ * Programs the various SGE registers. However, the engine is not yet enabled,
+ * but sge->sge_control is setup and ready to go.
+ */
+static void configure_sge(struct sge *sge, struct sge_params *p)
+{
+	struct adapter *ap = sge->adapter;
+	
+	writel(0, ap->regs + A_SG_CONTROL);
+	setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size,
+			  A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE);
+	setup_ring_params(ap, sge->cmdQ[1].dma_addr, sge->cmdQ[1].size,
+			  A_SG_CMD1BASELWR, A_SG_CMD1BASEUPR, A_SG_CMD1SIZE);
+	setup_ring_params(ap, sge->freelQ[0].dma_addr,
+			  sge->freelQ[0].size, A_SG_FL0BASELWR,
+			  A_SG_FL0BASEUPR, A_SG_FL0SIZE);
+	setup_ring_params(ap, sge->freelQ[1].dma_addr,
+			  sge->freelQ[1].size, A_SG_FL1BASELWR,
+			  A_SG_FL1BASEUPR, A_SG_FL1SIZE);
+
+	/* The threshold comparison uses <. */
+	writel(SGE_RX_SM_BUF_SIZE + 1, ap->regs + A_SG_FLTHRESHOLD);
+
+	setup_ring_params(ap, sge->respQ.dma_addr, sge->respQ.size,
+			  A_SG_RSPBASELWR, A_SG_RSPBASEUPR, A_SG_RSPSIZE);
+	writel((u32)sge->respQ.size - 1, ap->regs + A_SG_RSPQUEUECREDIT);
+
+	sge->sge_control = F_CMDQ0_ENABLE | F_CMDQ1_ENABLE | F_FL0_ENABLE |
+		F_FL1_ENABLE | F_CPL_ENABLE | F_RESPONSE_QUEUE_ENABLE |
+		V_CMDQ_PRIORITY(2) | F_DISABLE_CMDQ1_GTS | F_ISCSI_COALESCE |
+		F_DISABLE_FL0_GTS | F_DISABLE_FL1_GTS |
+		V_RX_PKT_OFFSET(sge->rx_pkt_pad);
+
+#if defined(__BIG_ENDIAN_BITFIELD)
+	sge->sge_control |= F_ENABLE_BIG_ENDIAN;
+#endif
+
+	/* Initialize no-resource timer */
+	sge->intrtimer_nres = SGE_INTRTIMER_NRES * core_ticks_per_usec(ap);
+
+	t1_sge_set_coalesce_params(sge, p);
+}
+
+/*
+ * Return the payload capacity of the jumbo free-list buffers.
+ */
+static inline unsigned int jumbo_payload_capacity(const struct sge *sge)
+{
+	return sge->freelQ[sge->jumbo_fl].rx_buffer_size -
+		sge->freelQ[sge->jumbo_fl].dma_offset -
+		sizeof(struct cpl_rx_data);
+}
+
+/*
+ * Frees all SGE related resources and the sge structure itself
+ */
+void t1_sge_destroy(struct sge *sge)
+{
+	if (sge->espibug_skb)
+		kfree_skb(sge->espibug_skb);
+
+	free_tx_resources(sge);
+	free_rx_resources(sge);
+	kfree(sge);
+}
+
+/*
+ * Allocates new RX buffers on the freelist Q (and tracks them on the freelist
+ * context Q) until the Q is full or alloc_skb fails.
+ *
+ * It is possible that the generation bits already match, indicating that the
+ * buffer is already valid and nothing needs to be done. This happens when we
+ * copied a received buffer into a new sk_buff during the interrupt processing.
+ *
+ * If the SGE doesn't automatically align packets properly (!sge->rx_pkt_pad),
+ * we specify a RX_OFFSET in order to make sure that the IP header is 4B
+ * aligned.
+ */
+static void refill_free_list(struct sge *sge, struct freelQ *q)
+{
+	struct pci_dev *pdev = sge->adapter->pdev;
+	struct freelQ_ce *ce = &q->centries[q->pidx];
+	struct freelQ_e *e = &q->entries[q->pidx];
+	unsigned int dma_len = q->rx_buffer_size - q->dma_offset;
+
+
+	while (q->credits < q->size) {
+		struct sk_buff *skb;
+		dma_addr_t mapping;
+
+		skb = alloc_skb(q->rx_buffer_size, GFP_ATOMIC);
+		if (!skb)
+			break;
+
+		skb_reserve(skb, q->dma_offset);
+		mapping = pci_map_single(pdev, skb->data, dma_len,
+					 PCI_DMA_FROMDEVICE);
+		ce->skb = skb;
+		pci_unmap_addr_set(ce, dma_addr, mapping);
+		pci_unmap_len_set(ce, dma_len, dma_len);
+		e->addr_lo = (u32)mapping;
+		e->addr_hi = (u64)mapping >> 32;
+		e->len_gen = V_CMD_LEN(dma_len) | V_CMD_GEN1(q->genbit);
+		wmb();
+		e->gen2 = V_CMD_GEN2(q->genbit);
+
+		e++;
+		ce++;
+		if (++q->pidx == q->size) {
+			q->pidx = 0;
+			q->genbit ^= 1;
+			ce = q->centries;
+			e = q->entries;
+		}
+		q->credits++;
+	}
+
+}
+
+/*
+ * Calls refill_free_list for both free lists. If we cannot fill at least 1/4
+ * of both rings, we go into 'few interrupt mode' in order to give the system
+ * time to free up resources.
+ */
+static void freelQs_empty(struct sge *sge)
+{
+	struct adapter *adapter = sge->adapter;
+	u32 irq_reg = readl(adapter->regs + A_SG_INT_ENABLE);
+	u32 irqholdoff_reg;
+
+	refill_free_list(sge, &sge->freelQ[0]);
+	refill_free_list(sge, &sge->freelQ[1]);
+
+	if (sge->freelQ[0].credits > (sge->freelQ[0].size >> 2) &&
+	    sge->freelQ[1].credits > (sge->freelQ[1].size >> 2)) {
+		irq_reg |= F_FL_EXHAUSTED;
+		irqholdoff_reg = sge->fixed_intrtimer;
+	} else {
+		/* Clear the F_FL_EXHAUSTED interrupts for now */
+		irq_reg &= ~F_FL_EXHAUSTED;
+		irqholdoff_reg = sge->intrtimer_nres;
+	}
+	writel(irqholdoff_reg, adapter->regs + A_SG_INTRTIMER);
+	writel(irq_reg, adapter->regs + A_SG_INT_ENABLE);
+
+	/* We reenable the Qs to force a freelist GTS interrupt later */
+	doorbell_pio(adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+}
+
+#define SGE_PL_INTR_MASK (F_PL_INTR_SGE_ERR | F_PL_INTR_SGE_DATA)
+#define SGE_INT_FATAL (F_RESPQ_OVERFLOW | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+#define SGE_INT_ENABLE (F_RESPQ_EXHAUSTED | F_RESPQ_OVERFLOW | \
+			F_FL_EXHAUSTED | F_PACKET_TOO_BIG | F_PACKET_MISMATCH)
+
+/*
+ * Disable SGE Interrupts
+ */
+void t1_sge_intr_disable(struct sge *sge)
+{
+	u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+	writel(val & ~SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+	writel(0, sge->adapter->regs + A_SG_INT_ENABLE);
+}
+
+/*
+ * Enable SGE interrupts.
+ */
+void t1_sge_intr_enable(struct sge *sge)
+{
+	u32 en = SGE_INT_ENABLE;
+	u32 val = readl(sge->adapter->regs + A_PL_ENABLE);
+
+	if (sge->adapter->flags & TSO_CAPABLE)
+		en &= ~F_PACKET_TOO_BIG;
+	writel(en, sge->adapter->regs + A_SG_INT_ENABLE);
+	writel(val | SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_ENABLE);
+}
+
+/*
+ * Clear SGE interrupts.
+ */
+void t1_sge_intr_clear(struct sge *sge)
+{
+	writel(SGE_PL_INTR_MASK, sge->adapter->regs + A_PL_CAUSE);
+	writel(0xffffffff, sge->adapter->regs + A_SG_INT_CAUSE);
+}
+
+/*
+ * SGE 'Error' interrupt handler
+ */
+int t1_sge_intr_error_handler(struct sge *sge)
+{
+	struct adapter *adapter = sge->adapter;
+	u32 cause = readl(adapter->regs + A_SG_INT_CAUSE);
+
+	if (adapter->flags & TSO_CAPABLE)
+		cause &= ~F_PACKET_TOO_BIG;
+	if (cause & F_RESPQ_EXHAUSTED)
+		sge->stats.respQ_empty++;
+	if (cause & F_RESPQ_OVERFLOW) {
+		sge->stats.respQ_overflow++;
+		CH_ALERT("%s: SGE response queue overflow\n",
+			 adapter->name);
+	}
+	if (cause & F_FL_EXHAUSTED) {
+		sge->stats.freelistQ_empty++;
+		freelQs_empty(sge);
+	}
+	if (cause & F_PACKET_TOO_BIG) {
+		sge->stats.pkt_too_big++;
+		CH_ALERT("%s: SGE max packet size exceeded\n",
+			 adapter->name);
+	}
+	if (cause & F_PACKET_MISMATCH) {
+		sge->stats.pkt_mismatch++;
+		CH_ALERT("%s: SGE packet mismatch\n", adapter->name);
+	}
+	if (cause & SGE_INT_FATAL)
+		t1_fatal_err(adapter);
+
+	writel(cause, adapter->regs + A_SG_INT_CAUSE);
+	return 0;
+}
+
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge)
+{
+	return &sge->stats;
+}
+
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port)
+{
+	return &sge->port_stats[port];
+}
+
+/**
+ *	recycle_fl_buf - recycle a free list buffer
+ *	@fl: the free list
+ *	@idx: index of buffer to recycle
+ *
+ *	Recycles the specified buffer on the given free list by adding it at
+ *	the next available slot on the list.
+ */
+static void recycle_fl_buf(struct freelQ *fl, int idx)
+{
+	struct freelQ_e *from = &fl->entries[idx];
+	struct freelQ_e *to = &fl->entries[fl->pidx];
+
+	fl->centries[fl->pidx] = fl->centries[idx];
+	to->addr_lo = from->addr_lo;
+	to->addr_hi = from->addr_hi;
+	to->len_gen = G_CMD_LEN(from->len_gen) | V_CMD_GEN1(fl->genbit);
+	wmb();
+	to->gen2 = V_CMD_GEN2(fl->genbit);
+	fl->credits++;
+
+	if (++fl->pidx == fl->size) {
+		fl->pidx = 0;
+		fl->genbit ^= 1;
+	}
+}
+
+/**
+ *	get_packet - return the next ingress packet buffer
+ *	@pdev: the PCI device that received the packet
+ *	@fl: the SGE free list holding the packet
+ *	@len: the actual packet length, excluding any SGE padding
+ *	@dma_pad: padding at beginning of buffer left by SGE DMA
+ *	@skb_pad: padding to be used if the packet is copied
+ *	@copy_thres: length threshold under which a packet should be copied
+ *	@drop_thres: # of remaining buffers before we start dropping packets
+ *
+ *	Get the next packet from a free list and complete setup of the
+ *	sk_buff.  If the packet is small we make a copy and recycle the
+ *	original buffer, otherwise we use the original buffer itself.  If a
+ *	positive drop threshold is supplied packets are dropped and their
+ *	buffers recycled if (a) the number of remaining buffers is under the
+ *	threshold and the packet is too big to copy, or (b) the packet should
+ *	be copied but there is no memory for the copy.
+ */
+static inline struct sk_buff *get_packet(struct pci_dev *pdev,
+					 struct freelQ *fl, unsigned int len,
+					 int dma_pad, int skb_pad,
+					 unsigned int copy_thres,
+					 unsigned int drop_thres)
+{
+	struct sk_buff *skb;
+	struct freelQ_ce *ce = &fl->centries[fl->cidx];
+
+	if (len < copy_thres) {
+		skb = alloc_skb(len + skb_pad, GFP_ATOMIC);
+		if (likely(skb != NULL)) {
+			skb_reserve(skb, skb_pad);
+			skb_put(skb, len);
+			pci_dma_sync_single_for_cpu(pdev,
+					    pci_unmap_addr(ce, dma_addr),
+ 					    pci_unmap_len(ce, dma_len),
+					    PCI_DMA_FROMDEVICE);
+			memcpy(skb->data, ce->skb->data + dma_pad, len);
+			pci_dma_sync_single_for_device(pdev,
+					    pci_unmap_addr(ce, dma_addr),
+ 					    pci_unmap_len(ce, dma_len),
+					    PCI_DMA_FROMDEVICE);
+		} else if (!drop_thres)
+			goto use_orig_buf;
+
+		recycle_fl_buf(fl, fl->cidx);
+		return skb;
+	}
+
+	if (fl->credits < drop_thres) {
+		recycle_fl_buf(fl, fl->cidx);
+		return NULL;
+	}
+
+use_orig_buf:
+	pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+			 pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+	skb = ce->skb;
+	skb_reserve(skb, dma_pad);
+	skb_put(skb, len);
+	return skb;
+}
+
+/**
+ *	unexpected_offload - handle an unexpected offload packet
+ *	@adapter: the adapter
+ *	@fl: the free list that received the packet
+ *
+ *	Called when we receive an unexpected offload packet (e.g., the TOE
+ *	function is disabled or the card is a NIC).  Prints a message and
+ *	recycles the buffer.
+ */
+static void unexpected_offload(struct adapter *adapter, struct freelQ *fl)
+{
+	struct freelQ_ce *ce = &fl->centries[fl->cidx];
+	struct sk_buff *skb = ce->skb;
+
+	pci_dma_sync_single_for_cpu(adapter->pdev, pci_unmap_addr(ce, dma_addr),
+			    pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
+	CH_ERR("%s: unexpected offload packet, cmd %u\n",
+	       adapter->name, *skb->data);
+	recycle_fl_buf(fl, fl->cidx);
+}
+
+/*
+ * Write the command descriptors to transmit the given skb starting at
+ * descriptor pidx with the given generation.
+ */
+static inline void write_tx_descs(struct adapter *adapter, struct sk_buff *skb,
+				  unsigned int pidx, unsigned int gen,
+				  struct cmdQ *q)
+{
+	dma_addr_t mapping;
+	struct cmdQ_e *e, *e1;
+	struct cmdQ_ce *ce;
+	unsigned int i, flags, nfrags = skb_shinfo(skb)->nr_frags;
+
+	mapping = pci_map_single(adapter->pdev, skb->data,
+				 skb->len - skb->data_len, PCI_DMA_TODEVICE);
+	ce = &q->centries[pidx];
+	ce->skb = NULL;
+	pci_unmap_addr_set(ce, dma_addr, mapping);
+	pci_unmap_len_set(ce, dma_len, skb->len - skb->data_len);
+
+	flags = F_CMD_DATAVALID | F_CMD_SOP | V_CMD_EOP(nfrags == 0) |
+		V_CMD_GEN2(gen);
+	e = &q->entries[pidx];
+	e->addr_lo = (u32)mapping;
+	e->addr_hi = (u64)mapping >> 32;
+	e->len_gen = V_CMD_LEN(skb->len - skb->data_len) | V_CMD_GEN1(gen);
+	for (e1 = e, i = 0; nfrags--; i++) {
+		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+		ce++;
+		e1++;
+		if (++pidx == q->size) {
+			pidx = 0;
+			gen ^= 1;
+			ce = q->centries;
+			e1 = q->entries;
+		}
+
+		mapping = pci_map_page(adapter->pdev, frag->page,
+				       frag->page_offset, frag->size,
+				       PCI_DMA_TODEVICE);
+		ce->skb = NULL;
+		pci_unmap_addr_set(ce, dma_addr, mapping);
+		pci_unmap_len_set(ce, dma_len, frag->size);
+
+		e1->addr_lo = (u32)mapping;
+		e1->addr_hi = (u64)mapping >> 32;
+		e1->len_gen = V_CMD_LEN(frag->size) | V_CMD_GEN1(gen);
+		e1->flags = F_CMD_DATAVALID | V_CMD_EOP(nfrags == 0) |
+			    V_CMD_GEN2(gen);
+	}
+
+	ce->skb = skb;
+	wmb();
+	e->flags = flags;
+}
+
+/*
+ * Clean up completed Tx buffers.
+ */
+static inline void reclaim_completed_tx(struct sge *sge, struct cmdQ *q)
+{
+	unsigned int reclaim = q->processed - q->cleaned;
+
+	if (reclaim) {
+		free_cmdQ_buffers(sge, q, reclaim);
+		q->cleaned += reclaim;
+	}
+}
+
+#ifndef SET_ETHTOOL_OPS
+# define __netif_rx_complete(dev) netif_rx_complete(dev)
+#endif
+
+/*
+ * We cannot use the standard netif_rx_schedule_prep() because we have multiple
+ * ports plus the TOE all multiplexing onto a single response queue, therefore
+ * accepting new responses cannot depend on the state of any particular port.
+ * So define our own equivalent that omits the netif_running() test.
+ */
+static inline int napi_schedule_prep(struct net_device *dev)
+{
+	return !test_and_set_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+
+/**
+ *	sge_rx - process an ingress ethernet packet
+ *	@sge: the sge structure
+ *	@fl: the free list that contains the packet buffer
+ *	@len: the packet length
+ *
+ *	Process an ingress ethernet pakcet and deliver it to the stack.
+ */
+static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
+{
+	struct sk_buff *skb;
+	struct cpl_rx_pkt *p;
+	struct adapter *adapter = sge->adapter;
+
+	sge->stats.ethernet_pkts++;
+	skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad,
+			 sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES,
+			 SGE_RX_DROP_THRES);
+	if (!skb) {
+		sge->port_stats[0].rx_drops++; /* charge only port 0 for now */
+		return 0;
+	}
+
+	p = (struct cpl_rx_pkt *)skb->data;
+	skb_pull(skb, sizeof(*p));
+	skb->dev = adapter->port[p->iff].dev;
+	skb->dev->last_rx = jiffies;
+	skb->protocol = eth_type_trans(skb, skb->dev);
+	if ((adapter->flags & RX_CSUM_ENABLED) && p->csum == 0xffff &&
+	    skb->protocol == htons(ETH_P_IP) &&
+	    (skb->data[9] == IPPROTO_TCP || skb->data[9] == IPPROTO_UDP)) {
+		sge->port_stats[p->iff].rx_cso_good++;
+		skb->ip_summed = CHECKSUM_UNNECESSARY;
+	} else
+		skb->ip_summed = CHECKSUM_NONE;
+
+	if (unlikely(adapter->vlan_grp && p->vlan_valid)) {
+		sge->port_stats[p->iff].vlan_xtract++;
+		if (adapter->params.sge.polling)
+			vlan_hwaccel_receive_skb(skb, adapter->vlan_grp,
+						 ntohs(p->vlan));
+		else
+			vlan_hwaccel_rx(skb, adapter->vlan_grp,
+					ntohs(p->vlan));
+	} else if (adapter->params.sge.polling)
+		netif_receive_skb(skb);
+	else
+		netif_rx(skb);
+	return 0;
+}
+
+/*
+ * Returns true if a command queue has enough available descriptors that
+ * we can resume Tx operation after temporarily disabling its packet queue.
+ */
+static inline int enough_free_Tx_descs(const struct cmdQ *q)
+{
+	unsigned int r = q->processed - q->cleaned;
+
+	return q->in_use - r < (q->size >> 1);
+}
+
+/*
+ * Called when sufficient space has become available in the SGE command queues
+ * after the Tx packet schedulers have been suspended to restart the Tx path.
+ */
+static void restart_tx_queues(struct sge *sge)
+{
+	struct adapter *adap = sge->adapter;
+
+	if (enough_free_Tx_descs(&sge->cmdQ[0])) {
+		int i;
+
+		for_each_port(adap, i) {
+			struct net_device *nd = adap->port[i].dev;
+
+			if (test_and_clear_bit(nd->if_port,
+					       &sge->stopped_tx_queues) &&
+			    netif_running(nd)) {
+				sge->stats.cmdQ_restarted[3]++;
+				netif_wake_queue(nd);
+			}
+		}
+	}
+}
+
+/*
+ * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0 
+ * information.
+ */
+static unsigned int update_tx_info(struct adapter *adapter, 
+					  unsigned int flags, 
+					  unsigned int pr0)
+{
+	struct sge *sge = adapter->sge;
+	struct cmdQ *cmdq = &sge->cmdQ[0];
+
+	cmdq->processed += pr0;
+
+	if (flags & F_CMDQ0_ENABLE) {
+		clear_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+	
+		if (cmdq->cleaned + cmdq->in_use != cmdq->processed &&
+		    !test_and_set_bit(CMDQ_STAT_LAST_PKT_DB, &cmdq->status)) {
+			set_bit(CMDQ_STAT_RUNNING, &cmdq->status);
+			writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+		}
+	 	flags &= ~F_CMDQ0_ENABLE;
+	}
+	
+	if (unlikely(sge->stopped_tx_queues != 0))
+		restart_tx_queues(sge);
+
+	return flags;
+}
+
+/*
+ * Process SGE responses, up to the supplied budget.  Returns the number of
+ * responses processed.  A negative budget is effectively unlimited.
+ */
+static int process_responses(struct adapter *adapter, int budget)
+{
+	struct sge *sge = adapter->sge;
+	struct respQ *q = &sge->respQ;
+	struct respQ_e *e = &q->entries[q->cidx];
+	int budget_left = budget;
+	unsigned int flags = 0;
+	unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+	
+
+	while (likely(budget_left && e->GenerationBit == q->genbit)) {
+		flags |= e->Qsleeping;
+		
+		cmdq_processed[0] += e->Cmdq0CreditReturn;
+		cmdq_processed[1] += e->Cmdq1CreditReturn;
+		
+		/* We batch updates to the TX side to avoid cacheline
+		 * ping-pong of TX state information on MP where the sender
+		 * might run on a different CPU than this function...
+		 */
+		if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) {
+			flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+			cmdq_processed[0] = 0;
+		}
+		if (unlikely(cmdq_processed[1] > 16)) {
+			sge->cmdQ[1].processed += cmdq_processed[1];
+			cmdq_processed[1] = 0;
+		}
+		if (likely(e->DataValid)) {
+			struct freelQ *fl = &sge->freelQ[e->FreelistQid];
+
+			if (unlikely(!e->Sop || !e->Eop))
+				BUG();
+			if (unlikely(e->Offload))
+				unexpected_offload(adapter, fl);
+			else
+				sge_rx(sge, fl, e->BufferLength);
+
+			/*
+			 * Note: this depends on each packet consuming a
+			 * single free-list buffer; cf. the BUG above.
+			 */
+			if (++fl->cidx == fl->size)
+				fl->cidx = 0;
+			if (unlikely(--fl->credits <
+				     fl->size - SGE_FREEL_REFILL_THRESH))
+				refill_free_list(sge, fl);
+		} else
+			sge->stats.pure_rsps++;
+
+		e++;
+		if (unlikely(++q->cidx == q->size)) {
+			q->cidx = 0;
+			q->genbit ^= 1;
+			e = q->entries;
+		}
+		prefetch(e);
+
+		if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+			writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+			q->credits = 0;
+		}
+		--budget_left;
+	}
+
+	flags = update_tx_info(adapter, flags, cmdq_processed[0]); 
+	sge->cmdQ[1].processed += cmdq_processed[1];
+
+	budget -= budget_left;
+	return budget;
+}
+
+/*
+ * A simpler version of process_responses() that handles only pure (i.e.,
+ * non data-carrying) responses.  Such respones are too light-weight to justify
+ * calling a softirq when using NAPI, so we handle them specially in hard
+ * interrupt context.  The function is called with a pointer to a response,
+ * which the caller must ensure is a valid pure response.  Returns 1 if it
+ * encounters a valid data-carrying response, 0 otherwise.
+ */
+static int process_pure_responses(struct adapter *adapter, struct respQ_e *e)
+{
+	struct sge *sge = adapter->sge;
+	struct respQ *q = &sge->respQ;
+	unsigned int flags = 0;
+	unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+
+	do {
+		flags |= e->Qsleeping;
+
+		cmdq_processed[0] += e->Cmdq0CreditReturn;
+		cmdq_processed[1] += e->Cmdq1CreditReturn;
+		
+		e++;
+		if (unlikely(++q->cidx == q->size)) {
+			q->cidx = 0;
+			q->genbit ^= 1;
+			e = q->entries;
+		}
+		prefetch(e);
+
+		if (++q->credits > SGE_RESPQ_REPLENISH_THRES) {
+			writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
+			q->credits = 0;
+		}
+		sge->stats.pure_rsps++;
+	} while (e->GenerationBit == q->genbit && !e->DataValid);
+
+	flags = update_tx_info(adapter, flags, cmdq_processed[0]); 
+	sge->cmdQ[1].processed += cmdq_processed[1];
+
+	return e->GenerationBit == q->genbit;
+}
+
+/*
+ * Handler for new data events when using NAPI.  This does not need any locking
+ * or protection from interrupts as data interrupts are off at this point and
+ * other adapter interrupts do not interfere.
+ */
+static int t1_poll(struct net_device *dev, int *budget)
+{
+	struct adapter *adapter = dev->priv;
+	int effective_budget = min(*budget, dev->quota);
+
+	int work_done = process_responses(adapter, effective_budget);
+	*budget -= work_done;
+	dev->quota -= work_done;
+
+	if (work_done >= effective_budget)
+		return 1;
+
+	__netif_rx_complete(dev);
+
+	/*
+	 * Because we don't atomically flush the following write it is
+	 * possible that in very rare cases it can reach the device in a way
+	 * that races with a new response being written plus an error interrupt
+	 * causing the NAPI interrupt handler below to return unhandled status
+	 * to the OS.  To protect against this would require flushing the write
+	 * and doing both the write and the flush with interrupts off.  Way too
+	 * expensive and unjustifiable given the rarity of the race.
+	 */
+	writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
+	return 0;
+}
+
+/*
+ * Returns true if the device is already scheduled for polling.
+ */
+static inline int napi_is_scheduled(struct net_device *dev)
+{
+	return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/*
+ * NAPI version of the main interrupt handler.
+ */
+static irqreturn_t t1_interrupt_napi(int irq, void *data, struct pt_regs *regs)
+{
+	int handled;
+	struct adapter *adapter = data;
+	struct sge *sge = adapter->sge;
+	struct respQ *q = &adapter->sge->respQ;
+
+	/*
+	 * Clear the SGE_DATA interrupt first thing.  Normally the NAPI
+	 * handler has control of the response queue and the interrupt handler
+	 * can look at the queue reliably only once it knows NAPI is off.
+	 * We can't wait that long to clear the SGE_DATA interrupt because we
+	 * could race with t1_poll rearming the SGE interrupt, so we need to
+	 * clear the interrupt speculatively and really early on.
+	 */
+	writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+	spin_lock(&adapter->async_lock);
+	if (!napi_is_scheduled(sge->netdev)) {
+		struct respQ_e *e = &q->entries[q->cidx];
+
+		if (e->GenerationBit == q->genbit) {
+			if (e->DataValid ||
+			    process_pure_responses(adapter, e)) {
+				if (likely(napi_schedule_prep(sge->netdev)))
+					__netif_rx_schedule(sge->netdev);
+				else
+					printk(KERN_CRIT
+					       "NAPI schedule failure!\n");
+			} else
+			writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+			handled = 1;
+			goto unlock;
+		} else
+		writel(q->cidx, adapter->regs + A_SG_SLEEPING);
+	}  else
+	if (readl(adapter->regs + A_PL_CAUSE) & F_PL_INTR_SGE_DATA)
+		printk(KERN_ERR "data interrupt while NAPI running\n");
+	
+	handled = t1_slow_intr_handler(adapter);
+	if (!handled)
+		sge->stats.unhandled_irqs++;
+ unlock:
+	spin_unlock(&adapter->async_lock);
+	return IRQ_RETVAL(handled != 0);
+}
+
+/*
+ * Main interrupt handler, optimized assuming that we took a 'DATA'
+ * interrupt.
+ *
+ * 1. Clear the interrupt
+ * 2. Loop while we find valid descriptors and process them; accumulate
+ *      information that can be processed after the loop
+ * 3. Tell the SGE at which index we stopped processing descriptors
+ * 4. Bookkeeping; free TX buffers, ring doorbell if there are any
+ *      outstanding TX buffers waiting, replenish RX buffers, potentially
+ *      reenable upper layers if they were turned off due to lack of TX
+ *      resources which are available again.
+ * 5. If we took an interrupt, but no valid respQ descriptors was found we
+ *      let the slow_intr_handler run and do error handling.
+ */
+static irqreturn_t t1_interrupt(int irq, void *cookie, struct pt_regs *regs)
+{
+	int work_done;
+	struct respQ_e *e;
+	struct adapter *adapter = cookie;
+	struct respQ *Q = &adapter->sge->respQ;
+
+	spin_lock(&adapter->async_lock);
+	e = &Q->entries[Q->cidx];
+	prefetch(e);
+
+	writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+
+	if (likely(e->GenerationBit == Q->genbit))
+		work_done = process_responses(adapter, -1);
+	else
+		work_done = t1_slow_intr_handler(adapter);
+
+	/*
+	 * The unconditional clearing of the PL_CAUSE above may have raced
+	 * with DMA completion and the corresponding generation of a response
+	 * to cause us to miss the resulting data interrupt.  The next write
+	 * is also unconditional to recover the missed interrupt and render
+	 * this race harmless.
+	 */
+	writel(Q->cidx, adapter->regs + A_SG_SLEEPING);
+
+	if (!work_done)
+		adapter->sge->stats.unhandled_irqs++;
+	spin_unlock(&adapter->async_lock);
+	return IRQ_RETVAL(work_done != 0);
+}
+
+intr_handler_t t1_select_intr_handler(adapter_t *adapter)
+{
+	return adapter->params.sge.polling ? t1_interrupt_napi : t1_interrupt;
+}
+
+/*
+ * Enqueues the sk_buff onto the cmdQ[qid] and has hardware fetch it.
+ *
+ * The code figures out how many entries the sk_buff will require in the
+ * cmdQ and updates the cmdQ data structure with the state once the enqueue
+ * has complete. Then, it doesn't access the global structure anymore, but
+ * uses the corresponding fields on the stack. In conjuction with a spinlock
+ * around that code, we can make the function reentrant without holding the
+ * lock when we actually enqueue (which might be expensive, especially on
+ * architectures with IO MMUs).
+ *
+ * This runs with softirqs disabled.
+ */
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+		       unsigned int qid, struct net_device *dev)
+{
+	struct sge *sge = adapter->sge;
+	struct cmdQ *q = &sge->cmdQ[qid];
+	unsigned int credits, pidx, genbit, count;
+
+	spin_lock(&q->lock);
+	reclaim_completed_tx(sge, q);
+
+	pidx = q->pidx;
+	credits = q->size - q->in_use;
+	count = 1 + skb_shinfo(skb)->nr_frags;
+
+	{	/* Ethernet packet */
+	 	if (unlikely(credits < count)) {
+			netif_stop_queue(dev);
+			set_bit(dev->if_port, &sge->stopped_tx_queues);
+			sge->stats.cmdQ_full[3]++;
+			spin_unlock(&q->lock);
+			CH_ERR("%s: Tx ring full while queue awake!\n",
+			       adapter->name);
+			return 1;
+		}
+		if (unlikely(credits - count < q->stop_thres)) {
+			sge->stats.cmdQ_full[3]++;
+			netif_stop_queue(dev);
+			set_bit(dev->if_port, &sge->stopped_tx_queues);
+		}
+	}
+	q->in_use += count;
+	genbit = q->genbit;
+	q->pidx += count;
+	if (q->pidx >= q->size) {
+		q->pidx -= q->size;
+		q->genbit ^= 1;
+	}
+	spin_unlock(&q->lock);
+
+	write_tx_descs(adapter, skb, pidx, genbit, q);
+
+	/*
+	 * We always ring the doorbell for cmdQ1.  For cmdQ0, we only ring
+	 * the doorbell if the Q is asleep. There is a natural race, where
+	 * the hardware is going to sleep just after we checked, however,
+	 * then the interrupt handler will detect the outstanding TX packet
+	 * and ring the doorbell for us.
+	 */
+	if (qid)
+		doorbell_pio(adapter, F_CMDQ1_ENABLE);
+	else {
+		clear_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+		if (test_and_set_bit(CMDQ_STAT_RUNNING, &q->status) == 0) {
+			set_bit(CMDQ_STAT_LAST_PKT_DB, &q->status);
+			writel(F_CMDQ0_ENABLE, adapter->regs + A_SG_DOORBELL);
+		}
+	}
+	return 0;
+}
+
+#define MK_ETH_TYPE_MSS(type, mss) (((mss) & 0x3FFF) | ((type) << 14))
+
+/*
+ *	eth_hdr_len - return the length of an Ethernet header
+ *	@data: pointer to the start of the Ethernet header
+ *
+ *	Returns the length of an Ethernet header, including optional VLAN tag.
+ */
+static inline int eth_hdr_len(const void *data)
+{
+	const struct ethhdr *e = data;
+
+	return e->h_proto == htons(ETH_P_8021Q) ? VLAN_ETH_HLEN : ETH_HLEN;
+}
+
+/*
+ * Adds the CPL header to the sk_buff and passes it to t1_sge_tx.
+ */
+int t1_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct adapter *adapter = dev->priv;
+	struct sge_port_stats *st = &adapter->sge->port_stats[dev->if_port];
+	struct sge *sge = adapter->sge;
+	struct cpl_tx_pkt *cpl;
+
+#ifdef NETIF_F_TSO
+	if (skb_shinfo(skb)->tso_size) {
+		int eth_type;
+		struct cpl_tx_pkt_lso *hdr;
+
+		st->tso++;
+
+		eth_type = skb->nh.raw - skb->data == ETH_HLEN ?
+			CPL_ETH_II : CPL_ETH_II_VLAN;
+
+		hdr = (struct cpl_tx_pkt_lso *)skb_push(skb, sizeof(*hdr));
+		hdr->opcode = CPL_TX_PKT_LSO;
+		hdr->ip_csum_dis = hdr->l4_csum_dis = 0;
+		hdr->ip_hdr_words = skb->nh.iph->ihl;
+		hdr->tcp_hdr_words = skb->h.th->doff;
+		hdr->eth_type_mss = htons(MK_ETH_TYPE_MSS(eth_type,
+						skb_shinfo(skb)->tso_size));
+		hdr->len = htonl(skb->len - sizeof(*hdr));
+		cpl = (struct cpl_tx_pkt *)hdr;
+		sge->stats.tx_lso_pkts++;
+	} else
+#endif
+	{
+		/*
+	 	 * Packets shorter than ETH_HLEN can break the MAC, drop them
+		 * early.  Also, we may get oversized packets because some
+		 * parts of the kernel don't handle our unusual hard_header_len
+		 * right, drop those too.
+		 */
+		if (unlikely(skb->len < ETH_HLEN ||
+			     skb->len > dev->mtu + eth_hdr_len(skb->data))) {
+			dev_kfree_skb_any(skb);
+			return NET_XMIT_SUCCESS;
+		}
+
+		/*
+		 * We are using a non-standard hard_header_len and some kernel
+		 * components, such as pktgen, do not handle it right.
+		 * Complain when this happens but try to fix things up.
+		 */
+		if (unlikely(skb_headroom(skb) <
+			     dev->hard_header_len - ETH_HLEN)) {
+			struct sk_buff *orig_skb = skb;
+
+			if (net_ratelimit())
+				printk(KERN_ERR "%s: inadequate headroom in "
+				       "Tx packet\n", dev->name);
+			skb = skb_realloc_headroom(skb, sizeof(*cpl));
+			dev_kfree_skb_any(orig_skb);
+			if (!skb)
+				return -ENOMEM;
+		}
+
+		if (!(adapter->flags & UDP_CSUM_CAPABLE) &&
+		    skb->ip_summed == CHECKSUM_HW &&
+		    skb->nh.iph->protocol == IPPROTO_UDP)
+			if (unlikely(skb_checksum_help(skb, 0))) {
+				dev_kfree_skb_any(skb);
+				return -ENOMEM;
+			}
+
+		/* Hmmm, assuming to catch the gratious arp... and we'll use
+		 * it to flush out stuck espi packets...
+		  */
+		if (unlikely(!adapter->sge->espibug_skb)) {
+			if (skb->protocol == htons(ETH_P_ARP) &&
+			    skb->nh.arph->ar_op == htons(ARPOP_REQUEST)) {
+				adapter->sge->espibug_skb = skb;
+				/* We want to re-use this skb later. We
+				 * simply bump the reference count and it
+				 * will not be freed...
+				 */
+				skb = skb_get(skb);
+			}
+		}
+
+		cpl = (struct cpl_tx_pkt *)__skb_push(skb, sizeof(*cpl));
+		cpl->opcode = CPL_TX_PKT;
+		cpl->ip_csum_dis = 1;    /* SW calculates IP csum */
+		cpl->l4_csum_dis = skb->ip_summed == CHECKSUM_HW ? 0 : 1;
+		/* the length field isn't used so don't bother setting it */
+
+		st->tx_cso += (skb->ip_summed == CHECKSUM_HW);
+		sge->stats.tx_do_cksum += (skb->ip_summed == CHECKSUM_HW);
+		sge->stats.tx_reg_pkts++;
+	}
+	cpl->iff = dev->if_port;
+
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+	if (adapter->vlan_grp && vlan_tx_tag_present(skb)) {
+		cpl->vlan_valid = 1;
+		cpl->vlan = htons(vlan_tx_tag_get(skb));
+		st->vlan_insert++;
+	} else
+#endif
+		cpl->vlan_valid = 0;
+
+	dev->trans_start = jiffies;
+	return t1_sge_tx(skb, adapter, 0, dev);
+}
+
+/*
+ * Callback for the Tx buffer reclaim timer.  Runs with softirqs disabled.
+ */
+static void sge_tx_reclaim_cb(unsigned long data)
+{
+	int i;
+	struct sge *sge = (struct sge *)data;
+
+	for (i = 0; i < SGE_CMDQ_N; ++i) {
+		struct cmdQ *q = &sge->cmdQ[i];
+
+		if (!spin_trylock(&q->lock))
+			continue;
+
+		reclaim_completed_tx(sge, q);
+		if (i == 0 && q->in_use)   /* flush pending credits */
+			writel(F_CMDQ0_ENABLE,
+				sge->adapter->regs + A_SG_DOORBELL);
+
+		spin_unlock(&q->lock);
+	}
+	mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+}
+
+/*
+ * Propagate changes of the SGE coalescing parameters to the HW.
+ */
+int t1_sge_set_coalesce_params(struct sge *sge, struct sge_params *p)
+{
+	sge->netdev->poll = t1_poll;
+	sge->fixed_intrtimer = p->rx_coalesce_usecs *
+		core_ticks_per_usec(sge->adapter);
+	writel(sge->fixed_intrtimer, sge->adapter->regs + A_SG_INTRTIMER);
+	return 0;
+}
+
+/*
+ * Allocates both RX and TX resources and configures the SGE. However,
+ * the hardware is not enabled yet.
+ */
+int t1_sge_configure(struct sge *sge, struct sge_params *p)
+{
+	if (alloc_rx_resources(sge, p))
+		return -ENOMEM;
+	if (alloc_tx_resources(sge, p)) {
+		free_rx_resources(sge);
+		return -ENOMEM;
+	}
+	configure_sge(sge, p);
+
+	/*
+	 * Now that we have sized the free lists calculate the payload
+	 * capacity of the large buffers.  Other parts of the driver use
+	 * this to set the max offload coalescing size so that RX packets
+	 * do not overflow our large buffers.
+	 */
+	p->large_buf_capacity = jumbo_payload_capacity(sge);
+	return 0;
+}
+
+/*
+ * Disables the DMA engine.
+ */
+void t1_sge_stop(struct sge *sge)
+{
+	writel(0, sge->adapter->regs + A_SG_CONTROL);
+	(void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+	if (is_T2(sge->adapter))
+		del_timer_sync(&sge->espibug_timer);
+	del_timer_sync(&sge->tx_reclaim_timer);
+}
+
+/*
+ * Enables the DMA engine.
+ */
+void t1_sge_start(struct sge *sge)
+{
+	refill_free_list(sge, &sge->freelQ[0]);
+	refill_free_list(sge, &sge->freelQ[1]);
+
+	writel(sge->sge_control, sge->adapter->regs + A_SG_CONTROL);
+	doorbell_pio(sge->adapter, F_FL0_ENABLE | F_FL1_ENABLE);
+	(void) readl(sge->adapter->regs + A_SG_CONTROL); /* flush */
+
+	mod_timer(&sge->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+
+	if (is_T2(sge->adapter)) 
+		mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
+}
+
+/*
+ * Callback for the T2 ESPI 'stuck packet feature' workaorund
+ */
+static void espibug_workaround(void *data)
+{
+	struct adapter *adapter = (struct adapter *)data;
+	struct sge *sge = adapter->sge;
+
+	if (netif_running(adapter->port[0].dev)) {
+		struct sk_buff *skb = sge->espibug_skb;
+
+		u32 seop = t1_espi_get_mon(adapter, 0x930, 0);
+
+		if ((seop & 0xfff0fff) == 0xfff && skb) {
+			if (!skb->cb[0]) {
+				u8 ch_mac_addr[ETH_ALEN] =
+				    {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
+				memcpy(skb->data + sizeof(struct cpl_tx_pkt),
+				    ch_mac_addr, ETH_ALEN);
+				memcpy(skb->data + skb->len - 10, ch_mac_addr,
+				    ETH_ALEN);
+				skb->cb[0] = 0xff;
+			}
+
+			/* bump the reference count to avoid freeing of the
+			 * skb once the DMA has completed.
+			 */
+			skb = skb_get(skb);
+			t1_sge_tx(skb, adapter, 0, adapter->port[0].dev);
+		}
+	}
+	mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
+}
+
+/*
+ * Creates a t1_sge structure and returns suggested resource parameters.
+ */
+struct sge * __devinit t1_sge_create(struct adapter *adapter,
+				     struct sge_params *p)
+{
+	struct sge *sge = kmalloc(sizeof(*sge), GFP_KERNEL);
+
+	if (!sge)
+		return NULL;
+	memset(sge, 0, sizeof(*sge));
+
+	sge->adapter = adapter;
+	sge->netdev = adapter->port[0].dev;
+	sge->rx_pkt_pad = t1_is_T1B(adapter) ? 0 : 2;
+	sge->jumbo_fl = t1_is_T1B(adapter) ? 1 : 0;
+
+	init_timer(&sge->tx_reclaim_timer);
+	sge->tx_reclaim_timer.data = (unsigned long)sge;
+	sge->tx_reclaim_timer.function = sge_tx_reclaim_cb;
+
+	if (is_T2(sge->adapter)) {
+		init_timer(&sge->espibug_timer);
+		sge->espibug_timer.function = (void *)&espibug_workaround;
+		sge->espibug_timer.data = (unsigned long)sge->adapter;
+		sge->espibug_timeout = 1;
+	}
+	 
+
+	p->cmdQ_size[0] = SGE_CMDQ0_E_N;
+	p->cmdQ_size[1] = SGE_CMDQ1_E_N;
+	p->freelQ_size[!sge->jumbo_fl] = SGE_FREEL_SIZE;
+	p->freelQ_size[sge->jumbo_fl] = SGE_JUMBO_FREEL_SIZE;
+	p->rx_coalesce_usecs =  50;
+	p->coalesce_enable = 0;
+	p->sample_interval_usecs = 0;
+	p->polling = 0;
+
+	return sge;
+}
diff --git a/drivers/net/chelsio/sge.h b/drivers/net/chelsio/sge.h
new file mode 100644
index 00000000000..434b2558685
--- /dev/null
+++ b/drivers/net/chelsio/sge.h
@@ -0,0 +1,105 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: sge.h                                                               *
+ * $Revision: 1.11 $                                                          *
+ * $Date: 2005/06/21 22:10:55 $                                              *
+ * Description:                                                              *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_SGE_H_
+#define _CXGB_SGE_H_
+
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/byteorder.h>
+
+#ifndef IRQ_RETVAL
+#define IRQ_RETVAL(x)
+typedef void irqreturn_t;
+#endif
+
+typedef irqreturn_t (*intr_handler_t)(int, void *, struct pt_regs *);
+
+struct sge_intr_counts {
+	unsigned int respQ_empty;      /* # times respQ empty */
+	unsigned int respQ_overflow;   /* # respQ overflow (fatal) */
+	unsigned int freelistQ_empty;  /* # times freelist empty */
+	unsigned int pkt_too_big;      /* packet too large (fatal) */
+	unsigned int pkt_mismatch;
+	unsigned int cmdQ_full[3];     /* not HW IRQ, host cmdQ[] full */
+	unsigned int cmdQ_restarted[3];/* # of times cmdQ X was restarted */
+	unsigned int ethernet_pkts;    /* # of Ethernet packets received */
+	unsigned int offload_pkts;     /* # of offload packets received */
+	unsigned int offload_bundles;  /* # of offload pkt bundles delivered */
+	unsigned int pure_rsps;        /* # of non-payload responses */
+	unsigned int unhandled_irqs;   /* # of unhandled interrupts */
+	unsigned int tx_ipfrags;
+	unsigned int tx_reg_pkts;
+	unsigned int tx_lso_pkts;
+	unsigned int tx_do_cksum;
+};
+
+struct sge_port_stats {
+	unsigned long rx_cso_good;     /* # of successful RX csum offloads */
+	unsigned long tx_cso;          /* # of TX checksum offloads */
+	unsigned long vlan_xtract;     /* # of VLAN tag extractions */
+	unsigned long vlan_insert;     /* # of VLAN tag extractions */
+	unsigned long tso;             /* # of TSO requests */
+	unsigned long rx_drops;        /* # of packets dropped due to no mem */
+};
+
+struct sk_buff;
+struct net_device;
+struct adapter;
+struct sge_params;
+struct sge;
+
+struct sge *t1_sge_create(struct adapter *, struct sge_params *);
+int t1_sge_configure(struct sge *, struct sge_params *);
+int t1_sge_set_coalesce_params(struct sge *, struct sge_params *);
+void t1_sge_destroy(struct sge *);
+intr_handler_t t1_select_intr_handler(adapter_t *adapter);
+unsigned int t1_sge_tx(struct sk_buff *skb, struct adapter *adapter,
+		       unsigned int qid, struct net_device *netdev);
+int t1_start_xmit(struct sk_buff *skb, struct net_device *dev);
+void t1_set_vlan_accel(struct adapter *adapter, int on_off);
+void t1_sge_start(struct sge *);
+void t1_sge_stop(struct sge *);
+int t1_sge_intr_error_handler(struct sge *);
+void t1_sge_intr_enable(struct sge *);
+void t1_sge_intr_disable(struct sge *);
+void t1_sge_intr_clear(struct sge *);
+const struct sge_intr_counts *t1_sge_get_intr_counts(struct sge *sge);
+const struct sge_port_stats *t1_sge_get_port_stats(struct sge *sge, int port);
+
+#endif /* _CXGB_SGE_H_ */
diff --git a/drivers/net/chelsio/subr.c b/drivers/net/chelsio/subr.c
new file mode 100644
index 00000000000..1ebb5d149ae
--- /dev/null
+++ b/drivers/net/chelsio/subr.c
@@ -0,0 +1,812 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: subr.c                                                              *
+ * $Revision: 1.27 $                                                         *
+ * $Date: 2005/06/22 01:08:36 $                                              *
+ * Description:                                                              *
+ *  Various subroutines (intr,pio,etc.) used by Chelsio 10G Ethernet driver. *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Copyright (c) 2003 - 2005 Chelsio Communications, Inc.                    *
+ * All rights reserved.                                                      *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: Dimitrios Michailidis   <dm@chelsio.com>                         *
+ *          Tina Yang               <tainay@chelsio.com>                     *
+ *          Felix Marti             <felix@chelsio.com>                      *
+ *          Scott Bardone           <sbardone@chelsio.com>                   *
+ *          Kurt Ottaway            <kottaway@chelsio.com>                   *
+ *          Frank DiMambro          <frank@chelsio.com>                      *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#include "common.h"
+#include "elmer0.h"
+#include "regs.h"
+#include "gmac.h"
+#include "cphy.h"
+#include "sge.h"
+#include "espi.h"
+
+/**
+ *	t1_wait_op_done - wait until an operation is completed
+ *	@adapter: the adapter performing the operation
+ *	@reg: the register to check for completion
+ *	@mask: a single-bit field within @reg that indicates completion
+ *	@polarity: the value of the field when the operation is completed
+ *	@attempts: number of check iterations
+ *      @delay: delay in usecs between iterations
+ *
+ *	Wait until an operation is completed by checking a bit in a register
+ *	up to @attempts times.  Returns %0 if the operation completes and %1
+ *	otherwise.
+ */
+static int t1_wait_op_done(adapter_t *adapter, int reg, u32 mask, int polarity,
+		    int attempts, int delay)
+{
+	while (1) {
+		u32 val = readl(adapter->regs + reg) & mask;
+
+		if (!!val == polarity)
+			return 0;
+		if (--attempts == 0)
+			return 1;
+		if (delay)
+			udelay(delay);
+	}
+}
+
+#define TPI_ATTEMPTS 50
+
+/*
+ * Write a register over the TPI interface (unlocked and locked versions).
+ */
+static int __t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
+{
+	int tpi_busy;
+
+	writel(addr, adapter->regs + A_TPI_ADDR);
+	writel(value, adapter->regs + A_TPI_WR_DATA);
+	writel(F_TPIWR, adapter->regs + A_TPI_CSR);
+
+	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
+				   TPI_ATTEMPTS, 3);
+	if (tpi_busy)
+		CH_ALERT("%s: TPI write to 0x%x failed\n",
+			 adapter->name, addr);
+	return tpi_busy;
+}
+
+int t1_tpi_write(adapter_t *adapter, u32 addr, u32 value)
+{
+	int ret;
+
+	spin_lock(&(adapter)->tpi_lock);
+	ret = __t1_tpi_write(adapter, addr, value);
+	spin_unlock(&(adapter)->tpi_lock);
+	return ret;
+}
+
+/*
+ * Read a register over the TPI interface (unlocked and locked versions).
+ */
+static int __t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
+{
+	int tpi_busy;
+
+	writel(addr, adapter->regs + A_TPI_ADDR);
+	writel(0, adapter->regs + A_TPI_CSR);
+
+	tpi_busy = t1_wait_op_done(adapter, A_TPI_CSR, F_TPIRDY, 1,
+				   TPI_ATTEMPTS, 3);
+	if (tpi_busy)
+		CH_ALERT("%s: TPI read from 0x%x failed\n",
+			 adapter->name, addr);
+	else
+		*valp = readl(adapter->regs + A_TPI_RD_DATA);
+	return tpi_busy;
+}
+
+int t1_tpi_read(adapter_t *adapter, u32 addr, u32 *valp)
+{
+	int ret;
+
+	spin_lock(&(adapter)->tpi_lock);
+	ret = __t1_tpi_read(adapter, addr, valp);
+	spin_unlock(&(adapter)->tpi_lock);
+	return ret;
+}
+
+/*
+ * Called when a port's link settings change to propagate the new values to the
+ * associated PHY and MAC.  After performing the common tasks it invokes an
+ * OS-specific handler.
+ */
+/* static */ void link_changed(adapter_t *adapter, int port_id)
+{
+	int link_ok, speed, duplex, fc;
+	struct cphy *phy = adapter->port[port_id].phy;
+	struct link_config *lc = &adapter->port[port_id].link_config;
+
+	phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
+
+	lc->speed = speed < 0 ? SPEED_INVALID : speed;
+	lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
+	if (!(lc->requested_fc & PAUSE_AUTONEG))
+		fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+	if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
+		/* Set MAC speed, duplex, and flow control to match PHY. */
+		struct cmac *mac = adapter->port[port_id].mac;
+
+		mac->ops->set_speed_duplex_fc(mac, speed, duplex, fc);
+		lc->fc = (unsigned char)fc;
+	}
+	t1_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+}
+
+static int t1_pci_intr_handler(adapter_t *adapter)
+{
+	u32 pcix_cause;
+
+    	pci_read_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, &pcix_cause);
+
+	if (pcix_cause) {
+		pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE,
+					 pcix_cause);
+		t1_fatal_err(adapter);    /* PCI errors are fatal */
+	}
+	return 0;
+}
+
+
+/*
+ * Wait until Elmer's MI1 interface is ready for new operations.
+ */
+static int mi1_wait_until_ready(adapter_t *adapter, int mi1_reg)
+{
+	int attempts = 100, busy;
+
+	do {
+		u32 val;
+
+		__t1_tpi_read(adapter, mi1_reg, &val);
+		busy = val & F_MI1_OP_BUSY;
+		if (busy)
+			udelay(10);
+	} while (busy && --attempts);
+	if (busy)
+		CH_ALERT("%s: MDIO operation timed out\n",
+			 adapter->name);
+	return busy;
+}
+
+/*
+ * MI1 MDIO initialization.
+ */
+static void mi1_mdio_init(adapter_t *adapter, const struct board_info *bi)
+{
+	u32 clkdiv = bi->clock_elmer0 / (2 * bi->mdio_mdc) - 1;
+	u32 val = F_MI1_PREAMBLE_ENABLE | V_MI1_MDI_INVERT(bi->mdio_mdiinv) |
+		V_MI1_MDI_ENABLE(bi->mdio_mdien) | V_MI1_CLK_DIV(clkdiv);
+
+	if (!(bi->caps & SUPPORTED_10000baseT_Full))
+		val |= V_MI1_SOF(1);
+	t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_CFG, val);
+}
+
+static int mi1_mdio_ext_read(adapter_t *adapter, int phy_addr, int mmd_addr,
+			     int reg_addr, unsigned int *valp)
+{
+	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+	spin_lock(&(adapter)->tpi_lock);
+
+	/* Write the address we want. */
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
+		       MI1_OP_INDIRECT_ADDRESS);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+	/* Write the operation we want. */
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_READ);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+	/* Read the data. */
+	__t1_tpi_read(adapter, A_ELMER0_PORT0_MI1_DATA, valp);
+	spin_unlock(&(adapter)->tpi_lock);
+	return 0;
+}
+
+static int mi1_mdio_ext_write(adapter_t *adapter, int phy_addr, int mmd_addr,
+			      int reg_addr, unsigned int val)
+{
+	u32 addr = V_MI1_REG_ADDR(mmd_addr) | V_MI1_PHY_ADDR(phy_addr);
+
+	spin_lock(&(adapter)->tpi_lock);
+
+	/* Write the address we want. */
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_ADDR, addr);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, reg_addr);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP,
+		       MI1_OP_INDIRECT_ADDRESS);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+
+	/* Write the data. */
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_DATA, val);
+	__t1_tpi_write(adapter, A_ELMER0_PORT0_MI1_OP, MI1_OP_INDIRECT_WRITE);
+	mi1_wait_until_ready(adapter, A_ELMER0_PORT0_MI1_OP);
+	spin_unlock(&(adapter)->tpi_lock);
+	return 0;
+}
+
+static struct mdio_ops mi1_mdio_ext_ops = {
+	mi1_mdio_init,
+	mi1_mdio_ext_read,
+	mi1_mdio_ext_write
+};
+
+enum {
+	CH_BRD_N110_1F,
+	CH_BRD_N210_1F,
+};
+
+static struct board_info t1_board[] = {
+
+{ CHBT_BOARD_N110, 1/*ports#*/,
+  SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T1,
+  CHBT_MAC_PM3393, CHBT_PHY_88X2010,
+  125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
+  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+  0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
+  &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
+  "Chelsio N110 1x10GBaseX NIC" },
+
+{ CHBT_BOARD_N210, 1/*ports#*/,
+  SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE /*caps*/, CHBT_TERM_T2,
+  CHBT_MAC_PM3393, CHBT_PHY_88X2010,
+  125000000/*clk-core*/, 0/*clk-mc3*/, 0/*clk-mc4*/,
+  1/*espi-ports*/, 0/*clk-cspi*/, 44/*clk-elmer0*/, 0/*mdien*/,
+  0/*mdiinv*/, 1/*mdc*/, 0/*phybaseaddr*/, &t1_pm3393_ops,
+  &t1_mv88x201x_ops, &mi1_mdio_ext_ops,
+  "Chelsio N210 1x10GBaseX NIC" },
+
+};
+
+struct pci_device_id t1_pci_tbl[] = {
+	CH_DEVICE(7, 0, CH_BRD_N110_1F),
+	CH_DEVICE(10, 1, CH_BRD_N210_1F),
+	{ 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, t1_pci_tbl);
+
+/*
+ * Return the board_info structure with a given index.  Out-of-range indices
+ * return NULL.
+ */
+const struct board_info *t1_get_board_info(unsigned int board_id)
+{
+	return board_id < ARRAY_SIZE(t1_board) ? &t1_board[board_id] : NULL;
+}
+
+struct chelsio_vpd_t {
+	u32 format_version;
+	u8 serial_number[16];
+	u8 mac_base_address[6];
+	u8 pad[2];           /* make multiple-of-4 size requirement explicit */
+};
+
+#define EEPROMSIZE        (8 * 1024)
+#define EEPROM_MAX_POLL   4
+
+/*
+ * Read SEEPROM. A zero is written to the flag register when the addres is
+ * written to the Control register. The hardware device will set the flag to a
+ * one when 4B have been transferred to the Data register.
+ */
+int t1_seeprom_read(adapter_t *adapter, u32 addr, u32 *data)
+{
+	int i = EEPROM_MAX_POLL;
+	u16 val;
+
+	if (addr >= EEPROMSIZE || (addr & 3))
+		return -EINVAL;
+
+	pci_write_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, (u16)addr);
+	do {
+		udelay(50);
+		pci_read_config_word(adapter->pdev, A_PCICFG_VPD_ADDR, &val);
+	} while (!(val & F_VPD_OP_FLAG) && --i);
+
+	if (!(val & F_VPD_OP_FLAG)) {
+		CH_ERR("%s: reading EEPROM address 0x%x failed\n",
+		       adapter->name, addr);
+		return -EIO;
+	}
+	pci_read_config_dword(adapter->pdev, A_PCICFG_VPD_DATA, data);
+	*data = le32_to_cpu(*data);
+	return 0;
+}
+
+static int t1_eeprom_vpd_get(adapter_t *adapter, struct chelsio_vpd_t *vpd)
+{
+	int addr, ret = 0;
+
+	for (addr = 0; !ret && addr < sizeof(*vpd); addr += sizeof(u32))
+		ret = t1_seeprom_read(adapter, addr,
+				      (u32 *)((u8 *)vpd + addr));
+
+	return ret;
+}
+
+/*
+ * Read a port's MAC address from the VPD ROM.
+ */
+static int vpd_macaddress_get(adapter_t *adapter, int index, u8 mac_addr[])
+{
+	struct chelsio_vpd_t vpd;
+
+	if (t1_eeprom_vpd_get(adapter, &vpd))
+		return 1;
+	memcpy(mac_addr, vpd.mac_base_address, 5);
+	mac_addr[5] = vpd.mac_base_address[5] + index;
+	return 0;
+}
+
+/*
+ * Set up the MAC/PHY according to the requested link settings.
+ *
+ * If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired and reset.
+ *
+ * If the PHY does not auto-negotiate we just reset it.
+ *
+ * If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t1_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
+{
+	unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+	if (lc->supported & SUPPORTED_Autoneg) {
+		lc->advertising &= ~(ADVERTISED_ASYM_PAUSE | ADVERTISED_PAUSE);
+		if (fc) {
+			lc->advertising |= ADVERTISED_ASYM_PAUSE;
+			if (fc == (PAUSE_RX | PAUSE_TX))
+				lc->advertising |= ADVERTISED_PAUSE;
+		}
+		phy->ops->advertise(phy, lc->advertising);
+
+		if (lc->autoneg == AUTONEG_DISABLE) {
+			lc->speed = lc->requested_speed;
+			lc->duplex = lc->requested_duplex;
+			lc->fc = (unsigned char)fc;
+			mac->ops->set_speed_duplex_fc(mac, lc->speed,
+						      lc->duplex, fc);
+			/* Also disables autoneg */
+			phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
+			phy->ops->reset(phy, 0);
+		} else
+			phy->ops->autoneg_enable(phy); /* also resets PHY */
+	} else {
+		mac->ops->set_speed_duplex_fc(mac, -1, -1, fc);
+		lc->fc = (unsigned char)fc;
+		phy->ops->reset(phy, 0);
+	}
+	return 0;
+}
+
+/*
+ * External interrupt handler for boards using elmer0.
+ */
+int elmer0_ext_intr_handler(adapter_t *adapter)
+{
+    	struct cphy *phy;
+	int phy_cause;
+    	u32 cause;
+
+	t1_tpi_read(adapter, A_ELMER0_INT_CAUSE, &cause);
+
+	switch (board_info(adapter)->board) {
+	case CHBT_BOARD_N210:
+	case CHBT_BOARD_N110:
+		if (cause & ELMER0_GP_BIT6) { /* Marvell 88x2010 interrupt */
+			phy = adapter->port[0].phy;
+			phy_cause = phy->ops->interrupt_handler(phy);
+			if (phy_cause & cphy_cause_link_change)
+				link_changed(adapter, 0);
+		}
+		break;
+	}
+	t1_tpi_write(adapter, A_ELMER0_INT_CAUSE, cause);
+	return 0;
+}
+
+/* Enables all interrupts. */
+void t1_interrupts_enable(adapter_t *adapter)
+{
+	unsigned int i;
+	u32 pl_intr;
+
+	adapter->slow_intr_mask = F_PL_INTR_SGE_ERR;
+
+	t1_sge_intr_enable(adapter->sge);
+	if (adapter->espi) {
+		adapter->slow_intr_mask |= F_PL_INTR_ESPI;
+		t1_espi_intr_enable(adapter->espi);
+	}
+
+	/* Enable MAC/PHY interrupts for each port. */
+	for_each_port(adapter, i) {
+		adapter->port[i].mac->ops->interrupt_enable(adapter->port[i].mac);
+		adapter->port[i].phy->ops->interrupt_enable(adapter->port[i].phy);
+	}
+
+	/* Enable PCIX & external chip interrupts on ASIC boards. */
+	pl_intr = readl(adapter->regs + A_PL_ENABLE);
+
+	/* PCI-X interrupts */
+	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE,
+			       0xffffffff);
+
+	adapter->slow_intr_mask |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+	pl_intr |= F_PL_INTR_EXT | F_PL_INTR_PCIX;
+	writel(pl_intr, adapter->regs + A_PL_ENABLE);
+}
+
+/* Disables all interrupts. */
+void t1_interrupts_disable(adapter_t* adapter)
+{
+	unsigned int i;
+
+	t1_sge_intr_disable(adapter->sge);
+	if (adapter->espi)
+		t1_espi_intr_disable(adapter->espi);
+
+	/* Disable MAC/PHY interrupts for each port. */
+	for_each_port(adapter, i) {
+		adapter->port[i].mac->ops->interrupt_disable(adapter->port[i].mac);
+		adapter->port[i].phy->ops->interrupt_disable(adapter->port[i].phy);
+	}
+
+	/* Disable PCIX & external chip interrupts. */
+	writel(0, adapter->regs + A_PL_ENABLE);
+
+	/* PCI-X interrupts */
+	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
+
+	adapter->slow_intr_mask = 0;
+}
+
+/* Clears all interrupts */
+void t1_interrupts_clear(adapter_t* adapter)
+{
+	unsigned int i;
+	u32 pl_intr;
+
+
+	t1_sge_intr_clear(adapter->sge);
+	if (adapter->espi)
+		t1_espi_intr_clear(adapter->espi);
+
+	/* Clear MAC/PHY interrupts for each port. */
+	for_each_port(adapter, i) {
+		adapter->port[i].mac->ops->interrupt_clear(adapter->port[i].mac);
+		adapter->port[i].phy->ops->interrupt_clear(adapter->port[i].phy);
+	}
+
+	/* Enable interrupts for external devices. */
+    	pl_intr = readl(adapter->regs + A_PL_CAUSE);
+
+	writel(pl_intr | F_PL_INTR_EXT | F_PL_INTR_PCIX,
+	       adapter->regs + A_PL_CAUSE);
+
+	/* PCI-X interrupts */
+	pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_CAUSE, 0xffffffff);
+}
+
+/*
+ * Slow path interrupt handler for ASICs.
+ */
+int t1_slow_intr_handler(adapter_t *adapter)
+{
+	u32 cause = readl(adapter->regs + A_PL_CAUSE);
+
+	cause &= adapter->slow_intr_mask;
+	if (!cause)
+		return 0;
+	if (cause & F_PL_INTR_SGE_ERR)
+		t1_sge_intr_error_handler(adapter->sge);
+	if (cause & F_PL_INTR_ESPI)
+		t1_espi_intr_handler(adapter->espi);
+	if (cause & F_PL_INTR_PCIX)
+		t1_pci_intr_handler(adapter);
+	if (cause & F_PL_INTR_EXT)
+		t1_elmer0_ext_intr(adapter);
+
+	/* Clear the interrupts just processed. */
+	writel(cause, adapter->regs + A_PL_CAUSE);
+	(void)readl(adapter->regs + A_PL_CAUSE); /* flush writes */
+	return 1;
+}
+
+/* Pause deadlock avoidance parameters */
+#define DROP_MSEC 16
+#define DROP_PKTS_CNT  1
+
+static void set_csum_offload(adapter_t *adapter, u32 csum_bit, int enable)
+{
+	u32 val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+
+	if (enable)
+		val |= csum_bit;
+	else
+		val &= ~csum_bit;
+	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
+}
+
+void t1_tp_set_ip_checksum_offload(adapter_t *adapter, int enable)
+{
+	set_csum_offload(adapter, F_IP_CSUM, enable);
+}
+
+void t1_tp_set_udp_checksum_offload(adapter_t *adapter, int enable)
+{
+	set_csum_offload(adapter, F_UDP_CSUM, enable);
+}
+
+void t1_tp_set_tcp_checksum_offload(adapter_t *adapter, int enable)
+{
+	set_csum_offload(adapter, F_TCP_CSUM, enable);
+}
+
+static void t1_tp_reset(adapter_t *adapter, unsigned int tp_clk)
+{
+	u32 val;
+
+	val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
+	      F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
+	val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
+	       F_TP_IN_ESPI_CHECK_TCP_CSUM;
+	writel(val, adapter->regs + A_TP_IN_CONFIG);
+	writel(F_TP_OUT_CSPI_CPL |
+	       F_TP_OUT_ESPI_ETHERNET |
+	       F_TP_OUT_ESPI_GENERATE_IP_CSUM |
+	       F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
+	       adapter->regs + A_TP_OUT_CONFIG);
+
+	val = readl(adapter->regs + A_TP_GLOBAL_CONFIG);
+	val &= ~(F_IP_CSUM | F_UDP_CSUM | F_TCP_CSUM);
+	writel(val, adapter->regs + A_TP_GLOBAL_CONFIG);
+
+	/*
+	 * Enable pause frame deadlock prevention.
+	 */
+	if (is_T2(adapter)) {
+		u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
+
+		writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
+		       V_DROP_TICKS_CNT(drop_ticks) |
+		       V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
+		       adapter->regs + A_TP_TX_DROP_CONFIG);
+	}
+
+	writel(F_TP_RESET, adapter->regs + A_TP_RESET);
+}
+
+int __devinit t1_get_board_rev(adapter_t *adapter, const struct board_info *bi,
+			       struct adapter_params *p)
+{
+	p->chip_version = bi->chip_term;
+	if (p->chip_version == CHBT_TERM_T1 ||
+	    p->chip_version == CHBT_TERM_T2) {
+		u32 val = readl(adapter->regs + A_TP_PC_CONFIG);
+
+		val = G_TP_PC_REV(val);
+		if (val == 2)
+			p->chip_revision = TERM_T1B;
+		else if (val == 3)
+			p->chip_revision = TERM_T2;
+		else
+			return -1;
+	} else
+		return -1;
+	return 0;
+}
+
+/*
+ * Enable board components other than the Chelsio chip, such as external MAC
+ * and PHY.
+ */
+static int board_init(adapter_t *adapter, const struct board_info *bi)
+{
+	switch (bi->board) {
+	case CHBT_BOARD_N110:
+	case CHBT_BOARD_N210:
+		writel(V_TPIPAR(0xf), adapter->regs + A_TPI_PAR);
+    		t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+		break;
+	}
+	return 0;
+}
+
+/*
+ * Initialize and configure the Terminator HW modules.  Note that external
+ * MAC and PHYs are initialized separately.
+ */
+int t1_init_hw_modules(adapter_t *adapter)
+{
+	int err = -EIO;
+	const struct board_info *bi = board_info(adapter);
+
+	if (!bi->clock_mc4) {
+		u32 val = readl(adapter->regs + A_MC4_CFG);
+
+		writel(val | F_READY | F_MC4_SLOW, adapter->regs + A_MC4_CFG);
+		writel(F_M_BUS_ENABLE | F_TCAM_RESET,
+		       adapter->regs + A_MC5_CONFIG);
+	}
+
+	if (adapter->espi && t1_espi_init(adapter->espi, bi->chip_mac,
+					  bi->espi_nports))
+		goto out_err;
+
+	t1_tp_reset(adapter, bi->clock_core);
+
+	err = t1_sge_configure(adapter->sge, &adapter->params.sge);
+	if (err)
+		goto out_err;
+
+	err = 0;
+ out_err:
+	return err;
+}
+
+/*
+ * Determine a card's PCI mode.
+ */
+static void __devinit get_pci_mode(adapter_t *adapter, struct chelsio_pci_params *p)
+{
+	static unsigned short speed_map[] = { 33, 66, 100, 133 };
+	u32 pci_mode;
+
+	pci_read_config_dword(adapter->pdev, A_PCICFG_MODE, &pci_mode);
+	p->speed = speed_map[G_PCI_MODE_CLK(pci_mode)];
+	p->width = (pci_mode & F_PCI_MODE_64BIT) ? 64 : 32;
+	p->is_pcix = (pci_mode & F_PCI_MODE_PCIX) != 0;
+}
+
+/*
+ * Release the structures holding the SW per-Terminator-HW-module state.
+ */
+void t1_free_sw_modules(adapter_t *adapter)
+{
+	unsigned int i;
+
+	for_each_port(adapter, i) {
+		struct cmac *mac = adapter->port[i].mac;
+		struct cphy *phy = adapter->port[i].phy;
+
+		if (mac)
+			mac->ops->destroy(mac);
+		if (phy)
+			phy->ops->destroy(phy);
+	}
+
+	if (adapter->sge)
+		t1_sge_destroy(adapter->sge);
+	if (adapter->espi)
+		t1_espi_destroy(adapter->espi);
+}
+
+static void __devinit init_link_config(struct link_config *lc,
+				       const struct board_info *bi)
+{
+	lc->supported = bi->caps;
+	lc->requested_speed = lc->speed = SPEED_INVALID;
+	lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
+	lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+	if (lc->supported & SUPPORTED_Autoneg) {
+		lc->advertising = lc->supported;
+		lc->autoneg = AUTONEG_ENABLE;
+		lc->requested_fc |= PAUSE_AUTONEG;
+	} else {
+		lc->advertising = 0;
+		lc->autoneg = AUTONEG_DISABLE;
+	}
+}
+
+
+/*
+ * Allocate and initialize the data structures that hold the SW state of
+ * the Terminator HW modules.
+ */
+int __devinit t1_init_sw_modules(adapter_t *adapter,
+				 const struct board_info *bi)
+{
+	unsigned int i;
+
+	adapter->params.brd_info = bi;
+	adapter->params.nports = bi->port_number;
+	adapter->params.stats_update_period = bi->gmac->stats_update_period;
+
+	adapter->sge = t1_sge_create(adapter, &adapter->params.sge);
+	if (!adapter->sge) {
+		CH_ERR("%s: SGE initialization failed\n",
+		       adapter->name);
+		goto error;
+	}
+
+	if (bi->espi_nports && !(adapter->espi = t1_espi_create(adapter))) {
+		CH_ERR("%s: ESPI initialization failed\n",
+		       adapter->name);
+		goto error;
+	}
+
+	board_init(adapter, bi);
+	bi->mdio_ops->init(adapter, bi);
+	if (bi->gphy->reset)
+		bi->gphy->reset(adapter);
+	if (bi->gmac->reset)
+		bi->gmac->reset(adapter);
+
+	for_each_port(adapter, i) {
+		u8 hw_addr[6];
+		struct cmac *mac;
+		int phy_addr = bi->mdio_phybaseaddr + i;
+
+		adapter->port[i].phy = bi->gphy->create(adapter, phy_addr,
+							bi->mdio_ops);
+		if (!adapter->port[i].phy) {
+			CH_ERR("%s: PHY %d initialization failed\n",
+			       adapter->name, i);
+			goto error;
+		}
+
+		adapter->port[i].mac = mac = bi->gmac->create(adapter, i);
+		if (!mac) {
+			CH_ERR("%s: MAC %d initialization failed\n",
+			       adapter->name, i);
+			goto error;
+		}
+
+		/*
+		 * Get the port's MAC addresses either from the EEPROM if one
+		 * exists or the one hardcoded in the MAC.
+		 */
+		if (vpd_macaddress_get(adapter, i, hw_addr)) {
+			CH_ERR("%s: could not read MAC address from VPD ROM\n",
+			       adapter->port[i].dev->name);
+			goto error;
+		}
+		memcpy(adapter->port[i].dev->dev_addr, hw_addr, ETH_ALEN);
+		init_link_config(&adapter->port[i].link_config, bi);
+	}
+
+	get_pci_mode(adapter, &adapter->params.pci);
+	t1_interrupts_clear(adapter);
+	return 0;
+
+ error:
+	t1_free_sw_modules(adapter);
+	return -1;
+}
diff --git a/drivers/net/chelsio/suni1x10gexp_regs.h b/drivers/net/chelsio/suni1x10gexp_regs.h
new file mode 100644
index 00000000000..81816c2b708
--- /dev/null
+++ b/drivers/net/chelsio/suni1x10gexp_regs.h
@@ -0,0 +1,213 @@
+/*****************************************************************************
+ *                                                                           *
+ * File: suni1x10gexp_regs.h                                                 *
+ * $Revision: 1.9 $                                                          *
+ * $Date: 2005/06/22 00:17:04 $                                              *
+ * Description:                                                              *
+ *  PMC/SIERRA (pm3393) MAC-PHY functionality.                               *
+ *  part of the Chelsio 10Gb Ethernet Driver.                                *
+ *                                                                           *
+ * This program is free software; you can redistribute it and/or modify      *
+ * it under the terms of the GNU General Public License, version 2, as       *
+ * published by the Free Software Foundation.                                *
+ *                                                                           *
+ * You should have received a copy of the GNU General Public License along   *
+ * with this program; if not, write to the Free Software Foundation, Inc.,   *
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.                 *
+ *                                                                           *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR IMPLIED    *
+ * WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF      *
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.                     *
+ *                                                                           *
+ * http://www.chelsio.com                                                    *
+ *                                                                           *
+ * Maintainers: maintainers@chelsio.com                                      *
+ *                                                                           *
+ * Authors: PMC/SIERRA                                                       *
+ *                                                                           *
+ * History:                                                                  *
+ *                                                                           *
+ ****************************************************************************/
+
+#ifndef _CXGB_SUNI1x10GEXP_REGS_H_
+#define _CXGB_SUNI1x10GEXP_REGS_H_
+
+/******************************************************************************/
+/** S/UNI-1x10GE-XP REGISTER ADDRESS MAP                                     **/
+/******************************************************************************/
+/* Refer to the Register Bit Masks bellow for the naming of each register and */
+/* to the S/UNI-1x10GE-XP Data Sheet for the signification of each bit        */
+/******************************************************************************/
+
+#define SUNI1x10GEXP_REG_DEVICE_STATUS                                   0x0004
+#define SUNI1x10GEXP_REG_MASTER_INTERRUPT_STATUS                         0x000D
+#define SUNI1x10GEXP_REG_GLOBAL_INTERRUPT_ENABLE                         0x000E
+#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_ENABLE                    0x0102
+#define SUNI1x10GEXP_REG_SERDES_3125_INTERRUPT_STATUS                    0x0104
+#define SUNI1x10GEXP_REG_RXXG_CONFIG_1                                   0x2040
+#define SUNI1x10GEXP_REG_RXXG_CONFIG_3                                   0x2042
+#define SUNI1x10GEXP_REG_RXXG_INTERRUPT                                  0x2043
+#define SUNI1x10GEXP_REG_RXXG_MAX_FRAME_LENGTH                           0x2045
+#define SUNI1x10GEXP_REG_RXXG_SA_15_0                                    0x2046
+#define SUNI1x10GEXP_REG_RXXG_SA_31_16                                   0x2047
+#define SUNI1x10GEXP_REG_RXXG_SA_47_32                                   0x2048
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_LOW                     0x204D
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_MID                     0x204E
+#define SUNI1x10GEXP_REG_RXXG_EXACT_MATCH_ADDR_1_HIGH                    0x204F
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_LOW                         0x206A
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDLOW                      0x206B
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_MIDHIGH                     0x206C
+#define SUNI1x10GEXP_REG_RXXG_MULTICAST_HASH_HIGH                        0x206D
+#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_0                   0x206E
+#define SUNI1x10GEXP_REG_RXXG_ADDRESS_FILTER_CONTROL_2                   0x2070
+#define SUNI1x10GEXP_REG_XRF_INTERRUPT_ENABLE                            0x2088
+#define SUNI1x10GEXP_REG_XRF_INTERRUPT_STATUS                            0x2089
+#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_ENABLE                       0x208B
+#define SUNI1x10GEXP_REG_XRF_DIAG_INTERRUPT_STATUS                       0x208C
+#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_ENABLE                          0x20C7
+#define SUNI1x10GEXP_REG_RXOAM_INTERRUPT_STATUS                          0x20C8
+#define SUNI1x10GEXP_REG_MSTAT_CONTROL                                   0x2100
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_0                        0x2101
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_1                        0x2102
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_2                        0x2103
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_ROLLOVER_3                        0x2104
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_0                          0x2105
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_1                          0x2106
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_2                          0x2107
+#define SUNI1x10GEXP_REG_MSTAT_INTERRUPT_MASK_3                          0x2108
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW                             0x2110
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_1_LOW                             0x2114
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_4_LOW                             0x2120
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_5_LOW                             0x2124
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_6_LOW                             0x2128
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_8_LOW                             0x2130
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_10_LOW                            0x2138
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_11_LOW                            0x213C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_12_LOW                            0x2140
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_13_LOW                            0x2144
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_15_LOW                            0x214C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_16_LOW                            0x2150
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_17_LOW                            0x2154
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_18_LOW                            0x2158
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_33_LOW                            0x2194
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_35_LOW                            0x219C
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_36_LOW                            0x21A0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_38_LOW                            0x21A8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_40_LOW                            0x21B0
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_42_LOW                            0x21B8
+#define SUNI1x10GEXP_REG_MSTAT_COUNTER_43_LOW                            0x21BC
+#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_ENABLE                       0x2209
+#define SUNI1x10GEXP_REG_IFLX_FIFO_OVERFLOW_INTERRUPT                    0x220A
+#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT_MASK                           0x2282
+#define SUNI1x10GEXP_REG_PL4ODP_INTERRUPT                                0x2283
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_STATUS                        0x2300
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_CHANGE                        0x2301
+#define SUNI1x10GEXP_REG_PL4IO_LOCK_DETECT_MASK                          0x2302
+#define SUNI1x10GEXP_REG_TXXG_CONFIG_1                                   0x3040
+#define SUNI1x10GEXP_REG_TXXG_CONFIG_3                                   0x3042
+#define SUNI1x10GEXP_REG_TXXG_INTERRUPT                                  0x3043
+#define SUNI1x10GEXP_REG_TXXG_MAX_FRAME_SIZE                             0x3045
+#define SUNI1x10GEXP_REG_TXXG_SA_15_0                                    0x3047
+#define SUNI1x10GEXP_REG_TXXG_SA_31_16                                   0x3048
+#define SUNI1x10GEXP_REG_TXXG_SA_47_32                                   0x3049
+#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_STATUS                           0x3084
+#define SUNI1x10GEXP_REG_XTEF_INTERRUPT_ENABLE                           0x3085
+#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_ENABLE                          0x30C6
+#define SUNI1x10GEXP_REG_TXOAM_INTERRUPT_STATUS                          0x30C7
+#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_ENABLE                 0x320C
+#define SUNI1x10GEXP_REG_EFLX_FIFO_OVERFLOW_ERROR_INDICATION             0x320D
+#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT_MASK                           0x3282
+#define SUNI1x10GEXP_REG_PL4IDU_INTERRUPT                                0x3283
+
+/******************************************************************************/
+/*                 -- End register offset definitions --                      */
+/******************************************************************************/
+
+/******************************************************************************/
+/** SUNI-1x10GE-XP REGISTER BIT MASKS                                        **/
+/******************************************************************************/
+
+/*----------------------------------------------------------------------------
+ * Register 0x0004: S/UNI-1x10GE-XP Device Status
+ *    Bit 9 TOP_SXRA_EXPIRED
+ *    Bit 8 TOP_MDIO_BUSY
+ *    Bit 7 TOP_DTRB
+ *    Bit 6 TOP_EXPIRED
+ *    Bit 5 TOP_PAUSED
+ *    Bit 4 TOP_PL4_ID_DOOL
+ *    Bit 3 TOP_PL4_IS_DOOL
+ *    Bit 2 TOP_PL4_ID_ROOL
+ *    Bit 1 TOP_PL4_IS_ROOL
+ *    Bit 0 TOP_PL4_OUT_ROOL
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TOP_SXRA_EXPIRED  0x0200
+#define SUNI1x10GEXP_BITMSK_TOP_EXPIRED       0x0040
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_DOOL   0x0010
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_DOOL   0x0008
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_ID_ROOL   0x0004
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_IS_ROOL   0x0002
+#define SUNI1x10GEXP_BITMSK_TOP_PL4_OUT_ROOL  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x000E:PM3393 Global interrupt enable
+ *    Bit 15 TOP_INTE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TOP_INTE  0x8000
+
+/*----------------------------------------------------------------------------
+ * Register 0x2040: RXXG Configuration 1
+ *    Bit 15  RXXG_RXEN
+ *    Bit 14  RXXG_ROCF
+ *    Bit 13  RXXG_PAD_STRIP
+ *    Bit 10  RXXG_PUREP
+ *    Bit 9   RXXG_LONGP
+ *    Bit 8   RXXG_PARF
+ *    Bit 7   RXXG_FLCHK
+ *    Bit 5   RXXG_PASS_CTRL
+ *    Bit 3   RXXG_CRC_STRIP
+ *    Bit 2-0 RXXG_MIFG
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_RXEN       0x8000
+#define SUNI1x10GEXP_BITMSK_RXXG_PUREP      0x0400
+#define SUNI1x10GEXP_BITMSK_RXXG_FLCHK      0x0080
+#define SUNI1x10GEXP_BITMSK_RXXG_CRC_STRIP  0x0008
+
+/*----------------------------------------------------------------------------
+ * Register 0x2070: RXXG Address Filter Control 2
+ *    Bit 1 RXXG_PMODE
+ *    Bit 0 RXXG_MHASH_EN
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_RXXG_PMODE     0x0002
+#define SUNI1x10GEXP_BITMSK_RXXG_MHASH_EN  0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x2100: MSTAT Control
+ *    Bit 2 MSTAT_WRITE
+ *    Bit 1 MSTAT_CLEAR
+ *    Bit 0 MSTAT_SNAP
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_MSTAT_CLEAR  0x0002
+#define SUNI1x10GEXP_BITMSK_MSTAT_SNAP   0x0001
+
+/*----------------------------------------------------------------------------
+ * Register 0x3040: TXXG Configuration Register 1
+ *    Bit 15   TXXG_TXEN0
+ *    Bit 13   TXXG_HOSTPAUSE
+ *    Bit 12-7 TXXG_IPGT
+ *    Bit 5    TXXG_32BIT_ALIGN
+ *    Bit 4    TXXG_CRCEN
+ *    Bit 3    TXXG_FCTX
+ *    Bit 2    TXXG_FCRX
+ *    Bit 1    TXXG_PADEN
+ *    Bit 0    TXXG_SPRE
+ *----------------------------------------------------------------------------*/
+#define SUNI1x10GEXP_BITMSK_TXXG_TXEN0        0x8000
+#define SUNI1x10GEXP_BITOFF_TXXG_IPGT         7
+#define SUNI1x10GEXP_BITMSK_TXXG_32BIT_ALIGN  0x0020
+#define SUNI1x10GEXP_BITMSK_TXXG_CRCEN        0x0010
+#define SUNI1x10GEXP_BITMSK_TXXG_FCTX         0x0008
+#define SUNI1x10GEXP_BITMSK_TXXG_FCRX         0x0004
+#define SUNI1x10GEXP_BITMSK_TXXG_PADEN        0x0002
+
+#endif /* _CXGB_SUNI1x10GEXP_REGS_H_ */
+
diff --git a/drivers/net/e100.c b/drivers/net/e100.c
index d0fa2448761..25cc20e415d 100644
--- a/drivers/net/e100.c
+++ b/drivers/net/e100.c
@@ -1,7 +1,7 @@
 /*******************************************************************************
 
   
-  Copyright(c) 1999 - 2004 Intel Corporation. All rights reserved.
+  Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
   
   This program is free software; you can redistribute it and/or modify it 
   under the terms of the GNU General Public License as published by the Free 
@@ -156,7 +156,7 @@
 
 #define DRV_NAME		"e100"
 #define DRV_EXT		"-NAPI"
-#define DRV_VERSION		"3.4.8-k2"DRV_EXT
+#define DRV_VERSION		"3.4.14-k2"DRV_EXT
 #define DRV_DESCRIPTION		"Intel(R) PRO/100 Network Driver"
 #define DRV_COPYRIGHT		"Copyright(c) 1999-2005 Intel Corporation"
 #define PFX			DRV_NAME ": "
@@ -785,6 +785,7 @@ static int e100_eeprom_save(struct nic *nic, u16 start, u16 count)
 }
 
 #define E100_WAIT_SCB_TIMEOUT 20000 /* we might have to wait 100ms!!! */
+#define E100_WAIT_SCB_FAST 20       /* delay like the old code */
 static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
 {
 	unsigned long flags;
@@ -798,7 +799,7 @@ static inline int e100_exec_cmd(struct nic *nic, u8 cmd, dma_addr_t dma_addr)
 		if(likely(!readb(&nic->csr->scb.cmd_lo)))
 			break;
 		cpu_relax();
-		if(unlikely(i > (E100_WAIT_SCB_TIMEOUT >> 1)))
+		if(unlikely(i > E100_WAIT_SCB_FAST))
 			udelay(5);
 	}
 	if(unlikely(i == E100_WAIT_SCB_TIMEOUT)) {
@@ -902,8 +903,8 @@ static void mdio_write(struct net_device *netdev, int addr, int reg, int data)
 
 static void e100_get_defaults(struct nic *nic)
 {
-	struct param_range rfds = { .min = 16, .max = 256, .count = 64 };
-	struct param_range cbs  = { .min = 64, .max = 256, .count = 64 };
+	struct param_range rfds = { .min = 16, .max = 256, .count = 256 };
+	struct param_range cbs  = { .min = 64, .max = 256, .count = 128 };
 
 	pci_read_config_byte(nic->pdev, PCI_REVISION_ID, &nic->rev_id);
 	/* MAC type is encoded as rev ID; exception: ICH is treated as 82559 */
@@ -1006,25 +1007,213 @@ static void e100_configure(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 		c[16], c[17], c[18], c[19], c[20], c[21], c[22], c[23]);
 }
 
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 8                      */
+/********************************************************/
+
+/*  Parameter values for the D101M B-step  */
+#define D101M_CPUSAVER_TIMER_DWORD		78
+#define D101M_CPUSAVER_BUNDLE_DWORD		65
+#define D101M_CPUSAVER_MIN_SIZE_DWORD		126
+
+#define D101M_B_RCVBUNDLE_UCODE \
+{\
+0x00550215, 0xFFFF0437, 0xFFFFFFFF, 0x06A70789, 0xFFFFFFFF, 0x0558FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380216, \
+0x0010009C, 0x00204056, 0x002380CC, 0x00380056, \
+0x0010009C, 0x00244C0B, 0x00000800, 0x00124818, \
+0x00380438, 0x00000000, 0x00140000, 0x00380555, \
+0x00308000, 0x00100662, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222C21, 0x000C0002, 0x00103093, \
+0x00380C7A, 0x00080000, 0x00103090, 0x00380C7A, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244C2D, 0x00010004, 0x00041000, \
+0x003A0437, 0x00044010, 0x0038078A, 0x00000000, \
+0x00100099, 0x00206C7A, 0x0010009C, 0x00244C48, \
+0x00130824, 0x000C0001, 0x00101213, 0x00260C75, \
+0x00041000, 0x00010004, 0x00130826, 0x000C0006, \
+0x002206A8, 0x0013C926, 0x00101313, 0x003806A8, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380C34, 0x00000000, 0x00000000, \
+0x0021155B, 0x00100099, 0x00206559, 0x0010009C, \
+0x00244559, 0x00130836, 0x000C0000, 0x00220C62, \
+0x000C0001, 0x00101B13, 0x00229C0E, 0x00210C0E, \
+0x00226C0E, 0x00216C0E, 0x0022FC0E, 0x00215C0E, \
+0x00214C0E, 0x00380555, 0x00010004, 0x00041000, \
+0x00278C67, 0x00040800, 0x00018100, 0x003A0437, \
+0x00130826, 0x000C0001, 0x00220559, 0x00101313, \
+0x00380559, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00130831, 0x0010090B, 0x00124813, \
+0x000CFF80, 0x002606AB, 0x00041000, 0x00010004, \
+0x003806A8, 0x00000000, 0x00000000, 0x00000000, \
+}
+
+/********************************************************/
+/*  Micro code for 8086:1229 Rev 9                      */
+/********************************************************/
+
+/*  Parameter values for the D101S  */
+#define D101S_CPUSAVER_TIMER_DWORD		78
+#define D101S_CPUSAVER_BUNDLE_DWORD		67
+#define D101S_CPUSAVER_MIN_SIZE_DWORD		128
+
+#define D101S_RCVBUNDLE_UCODE \
+{\
+0x00550242, 0xFFFF047E, 0xFFFFFFFF, 0x06FF0818, 0xFFFFFFFF, 0x05A6FFFF, \
+0x000C0001, 0x00101312, 0x000C0008, 0x00380243, \
+0x0010009C, 0x00204056, 0x002380D0, 0x00380056, \
+0x0010009C, 0x00244F8B, 0x00000800, 0x00124818, \
+0x0038047F, 0x00000000, 0x00140000, 0x003805A3, \
+0x00308000, 0x00100610, 0x00100561, 0x000E0408, \
+0x00134861, 0x000C0002, 0x00103093, 0x00308000, \
+0x00100624, 0x00100561, 0x000E0408, 0x00100861, \
+0x000C007E, 0x00222FA1, 0x000C0002, 0x00103093, \
+0x00380F90, 0x00080000, 0x00103090, 0x00380F90, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x0010009C, 0x00244FAD, 0x00010004, 0x00041000, \
+0x003A047E, 0x00044010, 0x00380819, 0x00000000, \
+0x00100099, 0x00206FFD, 0x0010009A, 0x0020AFFD, \
+0x0010009C, 0x00244FC8, 0x00130824, 0x000C0001, \
+0x00101213, 0x00260FF7, 0x00041000, 0x00010004, \
+0x00130826, 0x000C0006, 0x00220700, 0x0013C926, \
+0x00101313, 0x00380700, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00080600, 0x00101B10, 0x00050004, 0x00100826, \
+0x00101210, 0x00380FB6, 0x00000000, 0x00000000, \
+0x002115A9, 0x00100099, 0x002065A7, 0x0010009A, \
+0x0020A5A7, 0x0010009C, 0x002445A7, 0x00130836, \
+0x000C0000, 0x00220FE4, 0x000C0001, 0x00101B13, \
+0x00229F8E, 0x00210F8E, 0x00226F8E, 0x00216F8E, \
+0x0022FF8E, 0x00215F8E, 0x00214F8E, 0x003805A3, \
+0x00010004, 0x00041000, 0x00278FE9, 0x00040800, \
+0x00018100, 0x003A047E, 0x00130826, 0x000C0001, \
+0x002205A7, 0x00101313, 0x003805A7, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00130831, \
+0x0010090B, 0x00124813, 0x000CFF80, 0x00260703, \
+0x00041000, 0x00010004, 0x00380700  \
+}
+
+/********************************************************/
+/*  Micro code for the 8086:1229 Rev F/10               */
+/********************************************************/
+
+/*  Parameter values for the D102 E-step  */
+#define D102_E_CPUSAVER_TIMER_DWORD		42
+#define D102_E_CPUSAVER_BUNDLE_DWORD		54
+#define D102_E_CPUSAVER_MIN_SIZE_DWORD		46
+
+#define     D102_E_RCVBUNDLE_UCODE \
+{\
+0x007D028F, 0x0E4204F9, 0x14ED0C85, 0x14FA14E9, 0x0EF70E36, 0x1FFF1FFF, \
+0x00E014B9, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014BD, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014D5, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C1, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00E014C8, 0x00000000, 0x00000000, 0x00000000, \
+0x00200600, 0x00E014EE, 0x00000000, 0x00000000, \
+0x0030FF80, 0x00940E46, 0x00038200, 0x00102000, \
+0x00E00E43, 0x00000000, 0x00000000, 0x00000000, \
+0x00300006, 0x00E014FB, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000, \
+0x00906EFD, 0x00900EFD, 0x00E00EF8, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+0x00000000, 0x00000000, 0x00000000, 0x00000000, \
+}
+
 static void e100_load_ucode(struct nic *nic, struct cb *cb, struct sk_buff *skb)
 {
-	int i;
-	static const u32 ucode[UCODE_SIZE] = {
-		/* NFS packets are misinterpreted as TCO packets and
-		 * incorrectly routed to the BMC over SMBus.  This
-		 * microcode patch checks the fragmented IP bit in the
-		 * NFS/UDP header to distinguish between NFS and TCO. */
-		0x0EF70E36, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF, 0x1FFF1FFF,
-		0x1FFF1FFF, 0x00906E41, 0x00800E3C, 0x00E00E39, 0x00000000,
-		0x00906EFD, 0x00900EFD,	0x00E00EF8,
-	};
+/* *INDENT-OFF* */
+	static struct {
+		u32 ucode[UCODE_SIZE + 1];
+		u8 mac;
+		u8 timer_dword;
+		u8 bundle_dword;
+		u8 min_size_dword;
+	} ucode_opts[] = {
+		{ D101M_B_RCVBUNDLE_UCODE,
+		  mac_82559_D101M,
+		  D101M_CPUSAVER_TIMER_DWORD,
+		  D101M_CPUSAVER_BUNDLE_DWORD,
+		  D101M_CPUSAVER_MIN_SIZE_DWORD },
+		{ D101S_RCVBUNDLE_UCODE,
+		  mac_82559_D101S,
+		  D101S_CPUSAVER_TIMER_DWORD,
+		  D101S_CPUSAVER_BUNDLE_DWORD,
+		  D101S_CPUSAVER_MIN_SIZE_DWORD },
+		{ D102_E_RCVBUNDLE_UCODE,
+		  mac_82551_F,
+		  D102_E_CPUSAVER_TIMER_DWORD,
+		  D102_E_CPUSAVER_BUNDLE_DWORD,
+		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+		{ D102_E_RCVBUNDLE_UCODE,
+		  mac_82551_10,
+		  D102_E_CPUSAVER_TIMER_DWORD,
+		  D102_E_CPUSAVER_BUNDLE_DWORD,
+		  D102_E_CPUSAVER_MIN_SIZE_DWORD },
+		{ {0}, 0, 0, 0, 0}
+	}, *opts;
+/* *INDENT-ON* */
+
+#define BUNDLESMALL 1
+#define BUNDLEMAX 50
+#define INTDELAY 15000
+
+	opts = ucode_opts;
+
+	/* do not load u-code for ICH devices */
+	if (nic->flags & ich)
+		return;
+
+	/* Search for ucode match against h/w rev_id */
+	while (opts->mac) {
+		if (nic->mac == opts->mac) {
+			int i;
+			u32 *ucode = opts->ucode;
+
+			/* Insert user-tunable settings */
+			ucode[opts->timer_dword] &= 0xFFFF0000;
+			ucode[opts->timer_dword] |=
+				(u16) INTDELAY;
+			ucode[opts->bundle_dword] &= 0xFFFF0000;
+			ucode[opts->bundle_dword] |= (u16) BUNDLEMAX;
+			ucode[opts->min_size_dword] &= 0xFFFF0000;
+			ucode[opts->min_size_dword] |=
+				(BUNDLESMALL) ?  0xFFFF : 0xFF80;
+
+			for(i = 0; i < UCODE_SIZE; i++)
+				cb->u.ucode[i] = cpu_to_le32(ucode[i]);
+			cb->command = cpu_to_le16(cb_ucode);
+			return;
+		}
+		opts++;
+	}
 
-	if(nic->mac == mac_82551_F || nic->mac == mac_82551_10) {
-		for(i = 0; i < UCODE_SIZE; i++)
-			cb->u.ucode[i] = cpu_to_le32(ucode[i]);
-		cb->command = cpu_to_le16(cb_ucode);
-	} else
-		cb->command = cpu_to_le16(cb_nop);
+	cb->command = cpu_to_le16(cb_nop);
 }
 
 static void e100_setup_iaaddr(struct nic *nic, struct cb *cb,
@@ -1307,14 +1496,15 @@ static inline void e100_xmit_prepare(struct nic *nic, struct cb *cb,
 {
 	cb->command = nic->tx_command;
 	/* interrupt every 16 packets regardless of delay */
-	if((nic->cbs_avail & ~15) == nic->cbs_avail) cb->command |= cb_i;
+	if((nic->cbs_avail & ~15) == nic->cbs_avail)
+		cb->command |= cpu_to_le16(cb_i);
 	cb->u.tcb.tbd_array = cb->dma_addr + offsetof(struct cb, u.tcb.tbd);
 	cb->u.tcb.tcb_byte_count = 0;
 	cb->u.tcb.threshold = nic->tx_threshold;
 	cb->u.tcb.tbd_count = 1;
 	cb->u.tcb.tbd.buf_addr = cpu_to_le32(pci_map_single(nic->pdev,
 		skb->data, skb->len, PCI_DMA_TODEVICE));
-	// check for mapping failure?
+	/* check for mapping failure? */
 	cb->u.tcb.tbd.size = cpu_to_le16(skb->len);
 }
 
@@ -1539,7 +1729,7 @@ static inline int e100_rx_indicate(struct nic *nic, struct rx *rx,
 		/* Don't indicate if hardware indicates errors */
 		nic->net_stats.rx_dropped++;
 		dev_kfree_skb_any(skb);
-	} else if(actual_size > nic->netdev->mtu + VLAN_ETH_HLEN) {
+	} else if(actual_size > ETH_DATA_LEN + VLAN_ETH_HLEN) {
 		/* Don't indicate oversized frames */
 		nic->rx_over_length_errors++;
 		nic->net_stats.rx_dropped++;
@@ -1706,6 +1896,7 @@ static int e100_poll(struct net_device *netdev, int *budget)
 static void e100_netpoll(struct net_device *netdev)
 {
 	struct nic *nic = netdev_priv(netdev);
+
 	e100_disable_irq(nic);
 	e100_intr(nic->pdev->irq, netdev, NULL);
 	e100_tx_clean(nic);
@@ -2108,6 +2299,8 @@ static void e100_diag_test(struct net_device *netdev,
 	}
 	for(i = 0; i < E100_TEST_LEN; i++)
 		test->flags |= data[i] ? ETH_TEST_FL_FAILED : 0;
+
+	msleep_interruptible(4 * 1000);
 }
 
 static int e100_phys_id(struct net_device *netdev, u32 data)
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index b82fd15d089..9b596e0bbf9 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -2767,7 +2767,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
 					"  next_to_use          <%x>\n"
 					"  next_to_clean        <%x>\n"
 					"buffer_info[next_to_clean]\n"
-					"  dma                  <%zx>\n"
+					"  dma                  <%llx>\n"
 					"  time_stamp           <%lx>\n"
 					"  next_to_watch        <%x>\n"
 					"  jiffies              <%lx>\n"
@@ -2776,7 +2776,7 @@ e1000_clean_tx_irq(struct e1000_adapter *adapter)
 				E1000_READ_REG(&adapter->hw, TDT),
 				tx_ring->next_to_use,
 				i,
-				tx_ring->buffer_info[i].dma,
+				(unsigned long long)tx_ring->buffer_info[i].dma,
 				tx_ring->buffer_info[i].time_stamp,
 				eop,
 				jiffies,
diff --git a/drivers/net/eepro100.c b/drivers/net/eepro100.c
index 1795425f512..8c62ced2c9b 100644
--- a/drivers/net/eepro100.c
+++ b/drivers/net/eepro100.c
@@ -1263,8 +1263,8 @@ speedo_init_rx_ring(struct net_device *dev)
 	for (i = 0; i < RX_RING_SIZE; i++) {
 		struct sk_buff *skb;
 		skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
-		/* XXX: do we really want to call this before the NULL check? --hch */
-		rx_align(skb);			/* Align IP on 16 byte boundary */
+		if (skb)
+			rx_align(skb);        /* Align IP on 16 byte boundary */
 		sp->rx_skbuff[i] = skb;
 		if (skb == NULL)
 			break;			/* OK.  Just initially short of Rx bufs. */
@@ -1654,8 +1654,8 @@ static inline struct RxFD *speedo_rx_alloc(struct net_device *dev, int entry)
 	struct sk_buff *skb;
 	/* Get a fresh skbuff to replace the consumed one. */
 	skb = dev_alloc_skb(PKT_BUF_SZ + sizeof(struct RxFD));
-	/* XXX: do we really want to call this before the NULL check? --hch */
-	rx_align(skb);				/* Align IP on 16 byte boundary */
+	if (skb)
+		rx_align(skb);		/* Align IP on 16 byte boundary */
 	sp->rx_skbuff[entry] = skb;
 	if (skb == NULL) {
 		sp->rx_ringp[entry] = NULL;
diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c
index 64f0f697c95..7d93948aec8 100644
--- a/drivers/net/forcedeth.c
+++ b/drivers/net/forcedeth.c
@@ -85,6 +85,16 @@
  *	0.33: 16 May 2005: Support for MCP51 added.
  *	0.34: 18 Jun 2005: Add DEV_NEED_LINKTIMER to all nForce nics.
  *	0.35: 26 Jun 2005: Support for MCP55 added.
+ *	0.36: 28 Jun 2005: Add jumbo frame support.
+ *	0.37: 10 Jul 2005: Additional ethtool support, cleanup of pci id list
+ *	0.38: 16 Jul 2005: tx irq rewrite: Use global flags instead of
+ *			   per-packet flags.
+ *      0.39: 18 Jul 2005: Add 64bit descriptor support.
+ *      0.40: 19 Jul 2005: Add support for mac address change.
+ *      0.41: 30 Jul 2005: Write back original MAC in nv_close instead
+ *			   of nv_remove
+ *      0.42: 06 Aug 2005: Fix lack of link speed initialization
+ *			   in the second (and later) nv_open call
  *
  * Known bugs:
  * We suspect that on some hardware no TX done interrupts are generated.
@@ -96,7 +106,7 @@
  * DEV_NEED_TIMERIRQ will not harm you on sane hardware, only generating a few
  * superfluous timer interrupts from the nic.
  */
-#define FORCEDETH_VERSION		"0.35"
+#define FORCEDETH_VERSION		"0.41"
 #define DRV_NAME			"forcedeth"
 
 #include <linux/module.h>
@@ -131,11 +141,10 @@
  * Hardware access:
  */
 
-#define DEV_NEED_LASTPACKET1	0x0001	/* set LASTPACKET1 in tx flags */
-#define DEV_IRQMASK_1		0x0002  /* use NVREG_IRQMASK_WANTED_1 for irq mask */
-#define DEV_IRQMASK_2		0x0004  /* use NVREG_IRQMASK_WANTED_2 for irq mask */
-#define DEV_NEED_TIMERIRQ	0x0008  /* set the timer irq flag in the irq mask */
-#define DEV_NEED_LINKTIMER	0x0010	/* poll link settings. Relies on the timer irq */
+#define DEV_NEED_TIMERIRQ	0x0001  /* set the timer irq flag in the irq mask */
+#define DEV_NEED_LINKTIMER	0x0002	/* poll link settings. Relies on the timer irq */
+#define DEV_HAS_LARGEDESC	0x0004	/* device supports jumbo frames and needs packet format 2 */
+#define DEV_HAS_HIGH_DMA        0x0008  /* device supports 64bit dma */
 
 enum {
 	NvRegIrqStatus = 0x000,
@@ -146,13 +155,16 @@ enum {
 #define NVREG_IRQ_RX			0x0002
 #define NVREG_IRQ_RX_NOBUF		0x0004
 #define NVREG_IRQ_TX_ERR		0x0008
-#define NVREG_IRQ_TX2			0x0010
+#define NVREG_IRQ_TX_OK			0x0010
 #define NVREG_IRQ_TIMER			0x0020
 #define NVREG_IRQ_LINK			0x0040
+#define NVREG_IRQ_TX_ERROR		0x0080
 #define NVREG_IRQ_TX1			0x0100
-#define NVREG_IRQMASK_WANTED_1		0x005f
-#define NVREG_IRQMASK_WANTED_2		0x0147
-#define NVREG_IRQ_UNKNOWN		(~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR|NVREG_IRQ_TX2|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX1))
+#define NVREG_IRQMASK_WANTED		0x00df
+
+#define NVREG_IRQ_UNKNOWN	(~(NVREG_IRQ_RX_ERROR|NVREG_IRQ_RX|NVREG_IRQ_RX_NOBUF|NVREG_IRQ_TX_ERR| \
+					NVREG_IRQ_TX_OK|NVREG_IRQ_TIMER|NVREG_IRQ_LINK|NVREG_IRQ_TX_ERROR| \
+					NVREG_IRQ_TX1))
 
 	NvRegUnknownSetupReg6 = 0x008,
 #define NVREG_UNKSETUP6_VAL		3
@@ -286,6 +298,18 @@ struct ring_desc {
 	u32 FlagLen;
 };
 
+struct ring_desc_ex {
+	u32 PacketBufferHigh;
+	u32 PacketBufferLow;
+	u32 Reserved;
+	u32 FlagLen;
+};
+
+typedef union _ring_type {
+	struct ring_desc* orig;
+	struct ring_desc_ex* ex;
+} ring_type;
+
 #define FLAG_MASK_V1 0xffff0000
 #define FLAG_MASK_V2 0xffffc000
 #define LEN_MASK_V1 (0xffffffff ^ FLAG_MASK_V1)
@@ -293,7 +317,7 @@ struct ring_desc {
 
 #define NV_TX_LASTPACKET	(1<<16)
 #define NV_TX_RETRYERROR	(1<<19)
-#define NV_TX_LASTPACKET1	(1<<24)
+#define NV_TX_FORCED_INTERRUPT	(1<<24)
 #define NV_TX_DEFERRED		(1<<26)
 #define NV_TX_CARRIERLOST	(1<<27)
 #define NV_TX_LATECOLLISION	(1<<28)
@@ -303,7 +327,7 @@ struct ring_desc {
 
 #define NV_TX2_LASTPACKET	(1<<29)
 #define NV_TX2_RETRYERROR	(1<<18)
-#define NV_TX2_LASTPACKET1	(1<<23)
+#define NV_TX2_FORCED_INTERRUPT	(1<<30)
 #define NV_TX2_DEFERRED		(1<<25)
 #define NV_TX2_CARRIERLOST	(1<<26)
 #define NV_TX2_LATECOLLISION	(1<<27)
@@ -379,9 +403,13 @@ struct ring_desc {
 #define TX_LIMIT_START	62
 
 /* rx/tx mac addr + type + vlan + align + slack*/
-#define RX_NIC_BUFSIZE		(ETH_DATA_LEN + 64)
-/* even more slack */
-#define RX_ALLOC_BUFSIZE	(ETH_DATA_LEN + 128)
+#define NV_RX_HEADERS		(64)
+/* even more slack. */
+#define NV_RX_ALLOC_PAD		(64)
+
+/* maximum mtu size */
+#define NV_PKTLIMIT_1	ETH_DATA_LEN	/* hard limit not known */
+#define NV_PKTLIMIT_2	9100	/* Actual limit according to NVidia: 9202 */
 
 #define OOM_REFILL	(1+HZ/20)
 #define POLL_WAIT	(1+HZ/100)
@@ -396,6 +424,7 @@ struct ring_desc {
  */
 #define DESC_VER_1	0x0
 #define DESC_VER_2	(0x02100|NVREG_TXRXCTL_RXCHECK)
+#define DESC_VER_3      (0x02200|NVREG_TXRXCTL_RXCHECK)
 
 /* PHY defines */
 #define PHY_OUI_MARVELL	0x5043
@@ -468,11 +497,12 @@ struct fe_priv {
 	/* rx specific fields.
 	 * Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
 	 */
-	struct ring_desc *rx_ring;
+	ring_type rx_ring;
 	unsigned int cur_rx, refill_rx;
 	struct sk_buff *rx_skbuff[RX_RING];
 	dma_addr_t rx_dma[RX_RING];
 	unsigned int rx_buf_sz;
+	unsigned int pkt_limit;
 	struct timer_list oom_kick;
 	struct timer_list nic_poll;
 
@@ -484,7 +514,7 @@ struct fe_priv {
 	/*
 	 * tx specific fields.
 	 */
-	struct ring_desc *tx_ring;
+	ring_type tx_ring;
 	unsigned int next_tx, nic_tx;
 	struct sk_buff *tx_skbuff[TX_RING];
 	dma_addr_t tx_dma[TX_RING];
@@ -519,6 +549,11 @@ static inline u32 nv_descr_getlength(struct ring_desc *prd, u32 v)
 		& ((v == DESC_VER_1) ? LEN_MASK_V1 : LEN_MASK_V2);
 }
 
+static inline u32 nv_descr_getlength_ex(struct ring_desc_ex *prd, u32 v)
+{
+	return le32_to_cpu(prd->FlagLen) & LEN_MASK_V2;
+}
+
 static int reg_delay(struct net_device *dev, int offset, u32 mask, u32 target,
 				int delay, int delaymax, const char *msg)
 {
@@ -792,7 +827,7 @@ static int nv_alloc_rx(struct net_device *dev)
 		nr = refill_rx % RX_RING;
 		if (np->rx_skbuff[nr] == NULL) {
 
-			skb = dev_alloc_skb(RX_ALLOC_BUFSIZE);
+			skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD);
 			if (!skb)
 				break;
 
@@ -803,9 +838,16 @@ static int nv_alloc_rx(struct net_device *dev)
 		}
 		np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data, skb->len,
 						PCI_DMA_FROMDEVICE);
-		np->rx_ring[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
-		wmb();
-		np->rx_ring[nr].FlagLen = cpu_to_le32(RX_NIC_BUFSIZE | NV_RX_AVAIL);
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+			np->rx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->rx_dma[nr]);
+			wmb();
+			np->rx_ring.orig[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
+		} else {
+			np->rx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->rx_dma[nr]) >> 32;
+			np->rx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF;
+			wmb();
+			np->rx_ring.ex[nr].FlagLen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
+		}
 		dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n",
 					dev->name, refill_rx);
 		refill_rx++;
@@ -831,19 +873,37 @@ static void nv_do_rx_refill(unsigned long data)
 	enable_irq(dev->irq);
 }
 
-static int nv_init_ring(struct net_device *dev)
+static void nv_init_rx(struct net_device *dev) 
 {
 	struct fe_priv *np = get_nvpriv(dev);
 	int i;
 
-	np->next_tx = np->nic_tx = 0;
-	for (i = 0; i < TX_RING; i++)
-		np->tx_ring[i].FlagLen = 0;
-
 	np->cur_rx = RX_RING;
 	np->refill_rx = 0;
 	for (i = 0; i < RX_RING; i++)
-		np->rx_ring[i].FlagLen = 0;
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			np->rx_ring.orig[i].FlagLen = 0;
+	        else
+			np->rx_ring.ex[i].FlagLen = 0;
+}
+
+static void nv_init_tx(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	int i;
+
+	np->next_tx = np->nic_tx = 0;
+	for (i = 0; i < TX_RING; i++)
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			np->tx_ring.orig[i].FlagLen = 0;
+	        else
+			np->tx_ring.ex[i].FlagLen = 0;
+}
+
+static int nv_init_ring(struct net_device *dev)
+{
+	nv_init_tx(dev);
+	nv_init_rx(dev);
 	return nv_alloc_rx(dev);
 }
 
@@ -852,7 +912,10 @@ static void nv_drain_tx(struct net_device *dev)
 	struct fe_priv *np = get_nvpriv(dev);
 	int i;
 	for (i = 0; i < TX_RING; i++) {
-		np->tx_ring[i].FlagLen = 0;
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			np->tx_ring.orig[i].FlagLen = 0;
+		else
+			np->tx_ring.ex[i].FlagLen = 0;
 		if (np->tx_skbuff[i]) {
 			pci_unmap_single(np->pci_dev, np->tx_dma[i],
 						np->tx_skbuff[i]->len,
@@ -869,7 +932,10 @@ static void nv_drain_rx(struct net_device *dev)
 	struct fe_priv *np = get_nvpriv(dev);
 	int i;
 	for (i = 0; i < RX_RING; i++) {
-		np->rx_ring[i].FlagLen = 0;
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			np->rx_ring.orig[i].FlagLen = 0;
+		else
+			np->rx_ring.ex[i].FlagLen = 0;
 		wmb();
 		if (np->rx_skbuff[i]) {
 			pci_unmap_single(np->pci_dev, np->rx_dma[i],
@@ -900,11 +966,19 @@ static int nv_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data,skb->len,
 					PCI_DMA_TODEVICE);
 
-	np->tx_ring[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+		np->tx_ring.orig[nr].PacketBuffer = cpu_to_le32(np->tx_dma[nr]);
+	else {
+		np->tx_ring.ex[nr].PacketBufferHigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
+		np->tx_ring.ex[nr].PacketBufferLow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
+	}
 
 	spin_lock_irq(&np->lock);
 	wmb();
-	np->tx_ring[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+		np->tx_ring.orig[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
+	else
+		np->tx_ring.ex[nr].FlagLen = cpu_to_le32( (skb->len-1) | np->tx_flags );
 	dprintk(KERN_DEBUG "%s: nv_start_xmit: packet packet %d queued for transmission.\n",
 				dev->name, np->next_tx);
 	{
@@ -942,7 +1016,10 @@ static void nv_tx_done(struct net_device *dev)
 	while (np->nic_tx != np->next_tx) {
 		i = np->nic_tx % TX_RING;
 
-		Flags = le32_to_cpu(np->tx_ring[i].FlagLen);
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			Flags = le32_to_cpu(np->tx_ring.orig[i].FlagLen);
+		else
+			Flags = le32_to_cpu(np->tx_ring.ex[i].FlagLen);
 
 		dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, Flags 0x%x.\n",
 					dev->name, np->nic_tx, Flags);
@@ -993,9 +1070,56 @@ static void nv_tx_timeout(struct net_device *dev)
 	struct fe_priv *np = get_nvpriv(dev);
 	u8 __iomem *base = get_hwbase(dev);
 
-	dprintk(KERN_DEBUG "%s: Got tx_timeout. irq: %08x\n", dev->name,
+	printk(KERN_INFO "%s: Got tx_timeout. irq: %08x\n", dev->name,
 			readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK);
 
+	{
+		int i;
+
+		printk(KERN_INFO "%s: Ring at %lx: next %d nic %d\n",
+				dev->name, (unsigned long)np->ring_addr,
+				np->next_tx, np->nic_tx);
+		printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
+		for (i=0;i<0x400;i+= 32) {
+			printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
+					i,
+					readl(base + i + 0), readl(base + i + 4),
+					readl(base + i + 8), readl(base + i + 12),
+					readl(base + i + 16), readl(base + i + 20),
+					readl(base + i + 24), readl(base + i + 28));
+		}
+		printk(KERN_INFO "%s: Dumping tx ring\n", dev->name);
+		for (i=0;i<TX_RING;i+= 4) {
+			if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+				printk(KERN_INFO "%03x: %08x %08x // %08x %08x // %08x %08x // %08x %08x\n",
+				       i, 
+				       le32_to_cpu(np->tx_ring.orig[i].PacketBuffer),
+				       le32_to_cpu(np->tx_ring.orig[i].FlagLen),
+				       le32_to_cpu(np->tx_ring.orig[i+1].PacketBuffer),
+				       le32_to_cpu(np->tx_ring.orig[i+1].FlagLen),
+				       le32_to_cpu(np->tx_ring.orig[i+2].PacketBuffer),
+				       le32_to_cpu(np->tx_ring.orig[i+2].FlagLen),
+				       le32_to_cpu(np->tx_ring.orig[i+3].PacketBuffer),
+				       le32_to_cpu(np->tx_ring.orig[i+3].FlagLen));
+			} else {
+				printk(KERN_INFO "%03x: %08x %08x %08x // %08x %08x %08x // %08x %08x %08x // %08x %08x %08x\n",
+				       i, 
+				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferHigh),
+				       le32_to_cpu(np->tx_ring.ex[i].PacketBufferLow),
+				       le32_to_cpu(np->tx_ring.ex[i].FlagLen),
+				       le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferHigh),
+				       le32_to_cpu(np->tx_ring.ex[i+1].PacketBufferLow),
+				       le32_to_cpu(np->tx_ring.ex[i+1].FlagLen),
+				       le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferHigh),
+				       le32_to_cpu(np->tx_ring.ex[i+2].PacketBufferLow),
+				       le32_to_cpu(np->tx_ring.ex[i+2].FlagLen),
+				       le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferHigh),
+				       le32_to_cpu(np->tx_ring.ex[i+3].PacketBufferLow),
+				       le32_to_cpu(np->tx_ring.ex[i+3].FlagLen));
+			}
+		}
+	}
+
 	spin_lock_irq(&np->lock);
 
 	/* 1) stop tx engine */
@@ -1009,7 +1133,10 @@ static void nv_tx_timeout(struct net_device *dev)
 		printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
 		nv_drain_tx(dev);
 		np->next_tx = np->nic_tx = 0;
-		writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+		else
+			writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
 		netif_wake_queue(dev);
 	}
 
@@ -1084,8 +1211,13 @@ static void nv_rx_process(struct net_device *dev)
 			break;	/* we scanned the whole ring - do not continue */
 
 		i = np->cur_rx % RX_RING;
-		Flags = le32_to_cpu(np->rx_ring[i].FlagLen);
-		len = nv_descr_getlength(&np->rx_ring[i], np->desc_ver);
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+			Flags = le32_to_cpu(np->rx_ring.orig[i].FlagLen);
+			len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver);
+		} else {
+			Flags = le32_to_cpu(np->rx_ring.ex[i].FlagLen);
+			len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver);
+		}
 
 		dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, Flags 0x%x.\n",
 					dev->name, np->cur_rx, Flags);
@@ -1207,15 +1339,133 @@ next_pkt:
 	}
 }
 
+static void set_bufsize(struct net_device *dev)
+{
+	struct fe_priv *np = netdev_priv(dev);
+
+	if (dev->mtu <= ETH_DATA_LEN)
+		np->rx_buf_sz = ETH_DATA_LEN + NV_RX_HEADERS;
+	else
+		np->rx_buf_sz = dev->mtu + NV_RX_HEADERS;
+}
+
 /*
  * nv_change_mtu: dev->change_mtu function
  * Called with dev_base_lock held for read.
  */
 static int nv_change_mtu(struct net_device *dev, int new_mtu)
 {
-	if (new_mtu > ETH_DATA_LEN)
+	struct fe_priv *np = get_nvpriv(dev);
+	int old_mtu;
+
+	if (new_mtu < 64 || new_mtu > np->pkt_limit)
 		return -EINVAL;
+
+	old_mtu = dev->mtu;
 	dev->mtu = new_mtu;
+
+	/* return early if the buffer sizes will not change */
+	if (old_mtu <= ETH_DATA_LEN && new_mtu <= ETH_DATA_LEN)
+		return 0;
+	if (old_mtu == new_mtu)
+		return 0;
+
+	/* synchronized against open : rtnl_lock() held by caller */
+	if (netif_running(dev)) {
+		u8 *base = get_hwbase(dev);
+		/*
+		 * It seems that the nic preloads valid ring entries into an
+		 * internal buffer. The procedure for flushing everything is
+		 * guessed, there is probably a simpler approach.
+		 * Changing the MTU is a rare event, it shouldn't matter.
+		 */
+		disable_irq(dev->irq);
+		spin_lock_bh(&dev->xmit_lock);
+		spin_lock(&np->lock);
+		/* stop engines */
+		nv_stop_rx(dev);
+		nv_stop_tx(dev);
+		nv_txrx_reset(dev);
+		/* drain rx queue */
+		nv_drain_rx(dev);
+		nv_drain_tx(dev);
+		/* reinit driver view of the rx queue */
+		nv_init_rx(dev);
+		nv_init_tx(dev);
+		/* alloc new rx buffers */
+		set_bufsize(dev);
+		if (nv_alloc_rx(dev)) {
+			if (!np->in_shutdown)
+				mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+		}
+		/* reinit nic view of the rx queue */
+		writel(np->rx_buf_sz, base + NvRegOffloadConfig);
+		writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
+		if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+			writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+		else
+			writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
+		writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
+			base + NvRegRingSizes);
+		pci_push(base);
+		writel(NVREG_TXRXCTL_KICK|np->desc_ver, get_hwbase(dev) + NvRegTxRxControl);
+		pci_push(base);
+
+		/* restart rx engine */
+		nv_start_rx(dev);
+		nv_start_tx(dev);
+		spin_unlock(&np->lock);
+		spin_unlock_bh(&dev->xmit_lock);
+		enable_irq(dev->irq);
+	}
+	return 0;
+}
+
+static void nv_copy_mac_to_hw(struct net_device *dev)
+{
+	u8 *base = get_hwbase(dev);
+	u32 mac[2];
+
+	mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
+			(dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
+	mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
+
+	writel(mac[0], base + NvRegMacAddrA);
+	writel(mac[1], base + NvRegMacAddrB);
+}
+
+/*
+ * nv_set_mac_address: dev->set_mac_address function
+ * Called with rtnl_lock() held.
+ */
+static int nv_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	struct sockaddr *macaddr = (struct sockaddr*)addr;
+
+	if(!is_valid_ether_addr(macaddr->sa_data))
+		return -EADDRNOTAVAIL;
+
+	/* synchronized against open : rtnl_lock() held by caller */
+	memcpy(dev->dev_addr, macaddr->sa_data, ETH_ALEN);
+
+	if (netif_running(dev)) {
+		spin_lock_bh(&dev->xmit_lock);
+		spin_lock_irq(&np->lock);
+
+		/* stop rx engine */
+		nv_stop_rx(dev);
+
+		/* set mac address */
+		nv_copy_mac_to_hw(dev);
+
+		/* restart rx engine */
+		nv_start_rx(dev);
+		spin_unlock_irq(&np->lock);
+		spin_unlock_bh(&dev->xmit_lock);
+	} else {
+		nv_copy_mac_to_hw(dev);
+	}
 	return 0;
 }
 
@@ -1470,7 +1720,7 @@ static irqreturn_t nv_nic_irq(int foo, void *data, struct pt_regs *regs)
 		if (!(events & np->irqmask))
 			break;
 
-		if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX2|NVREG_IRQ_TX_ERR)) {
+		if (events & (NVREG_IRQ_TX1|NVREG_IRQ_TX_OK|NVREG_IRQ_TX_ERROR|NVREG_IRQ_TX_ERR)) {
 			spin_lock(&np->lock);
 			nv_tx_done(dev);
 			spin_unlock(&np->lock);
@@ -1761,6 +2011,50 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 	return 0;
 }
 
+#define FORCEDETH_REGS_VER	1
+#define FORCEDETH_REGS_SIZE	0x400 /* 256 32-bit registers */
+
+static int nv_get_regs_len(struct net_device *dev)
+{
+	return FORCEDETH_REGS_SIZE;
+}
+
+static void nv_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	u8 __iomem *base = get_hwbase(dev);
+	u32 *rbuf = buf;
+	int i;
+
+	regs->version = FORCEDETH_REGS_VER;
+	spin_lock_irq(&np->lock);
+	for (i=0;i<FORCEDETH_REGS_SIZE/sizeof(u32);i++)
+		rbuf[i] = readl(base + i*sizeof(u32));
+	spin_unlock_irq(&np->lock);
+}
+
+static int nv_nway_reset(struct net_device *dev)
+{
+	struct fe_priv *np = get_nvpriv(dev);
+	int ret;
+
+	spin_lock_irq(&np->lock);
+	if (np->autoneg) {
+		int bmcr;
+
+		bmcr = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
+		bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
+		mii_rw(dev, np->phyaddr, MII_BMCR, bmcr);
+
+		ret = 0;
+	} else {
+		ret = -EINVAL;
+	}
+	spin_unlock_irq(&np->lock);
+
+	return ret;
+}
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = nv_get_drvinfo,
 	.get_link = ethtool_op_get_link,
@@ -1768,6 +2062,9 @@ static struct ethtool_ops ops = {
 	.set_wol = nv_set_wol,
 	.get_settings = nv_get_settings,
 	.set_settings = nv_set_settings,
+	.get_regs_len = nv_get_regs_len,
+	.get_regs = nv_get_regs,
+	.nway_reset = nv_nway_reset,
 };
 
 static int nv_open(struct net_device *dev)
@@ -1792,6 +2089,7 @@ static int nv_open(struct net_device *dev)
 	writel(0, base + NvRegAdapterControl);
 
 	/* 2) initialize descriptor rings */
+	set_bufsize(dev);
 	oom = nv_init_ring(dev);
 
 	writel(0, base + NvRegLinkSpeed);
@@ -1802,20 +2100,14 @@ static int nv_open(struct net_device *dev)
 	np->in_shutdown = 0;
 
 	/* 3) set mac address */
-	{
-		u32 mac[2];
-
-		mac[0] = (dev->dev_addr[0] << 0) + (dev->dev_addr[1] << 8) +
-				(dev->dev_addr[2] << 16) + (dev->dev_addr[3] << 24);
-		mac[1] = (dev->dev_addr[4] << 0) + (dev->dev_addr[5] << 8);
-
-		writel(mac[0], base + NvRegMacAddrA);
-		writel(mac[1], base + NvRegMacAddrB);
-	}
+	nv_copy_mac_to_hw(dev);
 
 	/* 4) give hw rings */
 	writel((u32) np->ring_addr, base + NvRegRxRingPhysAddr);
-	writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+		writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc)), base + NvRegTxRingPhysAddr);
+	else
+		writel((u32) (np->ring_addr + RX_RING*sizeof(struct ring_desc_ex)), base + NvRegTxRingPhysAddr);
 	writel( ((RX_RING-1) << NVREG_RINGSZ_RXSHIFT) + ((TX_RING-1) << NVREG_RINGSZ_TXSHIFT),
 		base + NvRegRingSizes);
 
@@ -1837,7 +2129,7 @@ static int nv_open(struct net_device *dev)
 	writel(NVREG_MISC1_FORCE | NVREG_MISC1_HD, base + NvRegMisc1);
 	writel(readl(base + NvRegTransmitterStatus), base + NvRegTransmitterStatus);
 	writel(NVREG_PFF_ALWAYS, base + NvRegPacketFilterFlags);
-	writel(NVREG_OFFLOAD_NORMAL, base + NvRegOffloadConfig);
+	writel(np->rx_buf_sz, base + NvRegOffloadConfig);
 
 	writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
 	get_random_bytes(&i, sizeof(i));
@@ -1888,6 +2180,9 @@ static int nv_open(struct net_device *dev)
 		writel(NVREG_MIISTAT_MASK, base + NvRegMIIStatus);
 		dprintk(KERN_INFO "startup: got 0x%08x.\n", miistat);
 	}
+	/* set linkspeed to invalid value, thus force nv_update_linkspeed
+	 * to init hw */
+	np->linkspeed = 0;
 	ret = nv_update_linkspeed(dev);
 	nv_start_rx(dev);
 	nv_start_tx(dev);
@@ -1942,6 +2237,12 @@ static int nv_close(struct net_device *dev)
 	if (np->wolenabled)
 		nv_start_rx(dev);
 
+	/* special op: write back the misordered MAC address - otherwise
+	 * the next nv_probe would see a wrong address.
+	 */
+	writel(np->orig_mac[0], base + NvRegMacAddrA);
+	writel(np->orig_mac[1], base + NvRegMacAddrB);
+
 	/* FIXME: power down nic */
 
 	return 0;
@@ -2006,32 +2307,55 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	}
 
 	/* handle different descriptor versions */
-	if (pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_1 ||
-		pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_2 ||
-		pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_3 ||    
-		pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_12 ||
-		pci_dev->device == PCI_DEVICE_ID_NVIDIA_NVENET_13)
-		np->desc_ver = DESC_VER_1;
-	else
+	if (id->driver_data & DEV_HAS_HIGH_DMA) {
+		/* packet format 3: supports 40-bit addressing */
+		np->desc_ver = DESC_VER_3;
+		if (pci_set_dma_mask(pci_dev, 0x0000007fffffffffULL)) {
+			printk(KERN_INFO "forcedeth: 64-bit DMA failed, using 32-bit addressing for device %s.\n",
+					pci_name(pci_dev));
+		}
+	} else if (id->driver_data & DEV_HAS_LARGEDESC) {
+		/* packet format 2: supports jumbo frames */
 		np->desc_ver = DESC_VER_2;
+	} else {
+		/* original packet format */
+		np->desc_ver = DESC_VER_1;
+	}
+
+	np->pkt_limit = NV_PKTLIMIT_1;
+	if (id->driver_data & DEV_HAS_LARGEDESC)
+		np->pkt_limit = NV_PKTLIMIT_2;
 
 	err = -ENOMEM;
 	np->base = ioremap(addr, NV_PCI_REGSZ);
 	if (!np->base)
 		goto out_relreg;
 	dev->base_addr = (unsigned long)np->base;
+
 	dev->irq = pci_dev->irq;
-	np->rx_ring = pci_alloc_consistent(pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
-						&np->ring_addr);
-	if (!np->rx_ring)
-		goto out_unmap;
-	np->tx_ring = &np->rx_ring[RX_RING];
+
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
+		np->rx_ring.orig = pci_alloc_consistent(pci_dev,
+					sizeof(struct ring_desc) * (RX_RING + TX_RING),
+					&np->ring_addr);
+		if (!np->rx_ring.orig)
+			goto out_unmap;
+		np->tx_ring.orig = &np->rx_ring.orig[RX_RING];
+	} else {
+		np->rx_ring.ex = pci_alloc_consistent(pci_dev,
+					sizeof(struct ring_desc_ex) * (RX_RING + TX_RING),
+					&np->ring_addr);
+		if (!np->rx_ring.ex)
+			goto out_unmap;
+		np->tx_ring.ex = &np->rx_ring.ex[RX_RING];
+	}
 
 	dev->open = nv_open;
 	dev->stop = nv_close;
 	dev->hard_start_xmit = nv_start_xmit;
 	dev->get_stats = nv_get_stats;
 	dev->change_mtu = nv_change_mtu;
+	dev->set_mac_address = nv_set_mac_address;
 	dev->set_multicast_list = nv_set_multicast;
 #ifdef CONFIG_NET_POLL_CONTROLLER
 	dev->poll_controller = nv_poll_controller;
@@ -2080,17 +2404,10 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 
 	if (np->desc_ver == DESC_VER_1) {
 		np->tx_flags = NV_TX_LASTPACKET|NV_TX_VALID;
-		if (id->driver_data & DEV_NEED_LASTPACKET1)
-			np->tx_flags |= NV_TX_LASTPACKET1;
 	} else {
 		np->tx_flags = NV_TX2_LASTPACKET|NV_TX2_VALID;
-		if (id->driver_data & DEV_NEED_LASTPACKET1)
-			np->tx_flags |= NV_TX2_LASTPACKET1;
 	}
-	if (id->driver_data & DEV_IRQMASK_1)
-		np->irqmask = NVREG_IRQMASK_WANTED_1;
-	if (id->driver_data & DEV_IRQMASK_2)
-		np->irqmask = NVREG_IRQMASK_WANTED_2;
+	np->irqmask = NVREG_IRQMASK_WANTED;
 	if (id->driver_data & DEV_NEED_TIMERIRQ)
 		np->irqmask |= NVREG_IRQ_TIMER;
 	if (id->driver_data & DEV_NEED_LINKTIMER) {
@@ -2155,8 +2472,12 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
 	return 0;
 
 out_freering:
-	pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
-				np->rx_ring, np->ring_addr);
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+		pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING),
+				    np->rx_ring.orig, np->ring_addr);
+	else
+		pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING),
+				    np->rx_ring.ex, np->ring_addr);
 	pci_set_drvdata(pci_dev, NULL);
 out_unmap:
 	iounmap(get_hwbase(dev));
@@ -2174,18 +2495,14 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
 {
 	struct net_device *dev = pci_get_drvdata(pci_dev);
 	struct fe_priv *np = get_nvpriv(dev);
-	u8 __iomem *base = get_hwbase(dev);
 
 	unregister_netdev(dev);
 
-	/* special op: write back the misordered MAC address - otherwise
-	 * the next nv_probe would see a wrong address.
-	 */
-	writel(np->orig_mac[0], base + NvRegMacAddrA);
-	writel(np->orig_mac[1], base + NvRegMacAddrB);
-
 	/* free all structures */
-	pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring, np->ring_addr);
+	if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+		pci_free_consistent(np->pci_dev, sizeof(struct ring_desc) * (RX_RING + TX_RING), np->rx_ring.orig, np->ring_addr);
+	else
+		pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (RX_RING + TX_RING), np->rx_ring.ex, np->ring_addr);
 	iounmap(get_hwbase(dev));
 	pci_release_regions(pci_dev);
 	pci_disable_device(pci_dev);
@@ -2195,109 +2512,64 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
 
 static struct pci_device_id pci_tbl[] = {
 	{	/* nForce Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_1,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_IRQMASK_1|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_1),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce2 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_2,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_2),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_3,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_3),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
 	},
 	{	/* nForce3 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_4,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_4),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
 	},
 	{	/* nForce3 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_5,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_5),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
 	},
 	{	/* nForce3 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_6,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_6),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
 	},
 	{	/* nForce3 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_7,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_7),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC,
 	},
 	{	/* CK804 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_8,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{	/* CK804 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_9,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP04 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_10,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP04 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_11,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP51 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_12,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP51 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_13,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP55 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_14,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{	/* MCP55 Ethernet Controller */
-		.vendor = PCI_VENDOR_ID_NVIDIA,
-		.device = PCI_DEVICE_ID_NVIDIA_NVENET_15,
-		.subvendor = PCI_ANY_ID,
-		.subdevice = PCI_ANY_ID,
-		.driver_data = DEV_NEED_LASTPACKET1|DEV_IRQMASK_2|DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER,
+		PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
+		.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA,
 	},
 	{0,},
 };
diff --git a/drivers/net/hamradio/6pack.c b/drivers/net/hamradio/6pack.c
index f9e3be96963..0b230222bfe 100644
--- a/drivers/net/hamradio/6pack.c
+++ b/drivers/net/hamradio/6pack.c
@@ -308,12 +308,6 @@ static int sp_set_mac_address(struct net_device *dev, void *addr)
 {
 	struct sockaddr_ax25 *sa = addr;
 
-	if (sa->sax25_family != AF_AX25)
-		return -EINVAL;
-
-	if (!sa->sax25_ndigis)
-		return -EINVAL;
-
 	spin_lock_irq(&dev->xmit_lock);
 	memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN);
 	spin_unlock_irq(&dev->xmit_lock);
@@ -668,6 +662,9 @@ static int sixpack_open(struct tty_struct *tty)
 	netif_start_queue(dev);
 
 	init_timer(&sp->tx_t);
+	sp->tx_t.function = sp_xmit_on_air;
+	sp->tx_t.data = (unsigned long) sp;
+
 	init_timer(&sp->resync_t);
 
 	spin_unlock_bh(&sp->lock);
diff --git a/drivers/net/hamradio/Kconfig b/drivers/net/hamradio/Kconfig
index 0cd54306e63..de087cd609d 100644
--- a/drivers/net/hamradio/Kconfig
+++ b/drivers/net/hamradio/Kconfig
@@ -1,6 +1,6 @@
 config MKISS
 	tristate "Serial port KISS driver"
-	depends on AX25 && BROKEN_ON_SMP
+	depends on AX25
 	---help---
 	  KISS is a protocol used for the exchange of data between a computer
 	  and a Terminal Node Controller (a small embedded system commonly
diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c
index a7f15d9f13e..5298096afbd 100644
--- a/drivers/net/hamradio/baycom_epp.c
+++ b/drivers/net/hamradio/baycom_epp.c
@@ -54,6 +54,7 @@
 #include <linux/kmod.h>
 #include <linux/hdlcdrv.h>
 #include <linux/baycom.h>
+#include <linux/jiffies.h>
 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 /* prototypes for ax25_encapsulate and ax25_rebuild_header */
 #include <net/ax25.h> 
@@ -287,7 +288,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
 	 * measure the interrupt frequency
 	 */
 	bc->debug_vals.cur_intcnt++;
-	if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+	if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
 		bc->debug_vals.last_jiffies = cur_jiffies;
 		bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
 		bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_par.c b/drivers/net/hamradio/baycom_par.c
index 612ad452bee..3b1bef1ee21 100644
--- a/drivers/net/hamradio/baycom_par.c
+++ b/drivers/net/hamradio/baycom_par.c
@@ -84,6 +84,7 @@
 #include <linux/baycom.h>
 #include <linux/parport.h>
 #include <linux/bitops.h>
+#include <linux/jiffies.h>
 
 #include <asm/bug.h>
 #include <asm/system.h>
@@ -165,7 +166,7 @@ static void __inline__ baycom_int_freq(struct baycom_state *bc)
 	 * measure the interrupt frequency
 	 */
 	bc->debug_vals.cur_intcnt++;
-	if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+	if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
 		bc->debug_vals.last_jiffies = cur_jiffies;
 		bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
 		bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_ser_fdx.c b/drivers/net/hamradio/baycom_ser_fdx.c
index 25f270b0537..232793d2ce6 100644
--- a/drivers/net/hamradio/baycom_ser_fdx.c
+++ b/drivers/net/hamradio/baycom_ser_fdx.c
@@ -79,6 +79,7 @@
 #include <asm/io.h>
 #include <linux/hdlcdrv.h>
 #include <linux/baycom.h>
+#include <linux/jiffies.h>
 
 /* --------------------------------------------------------------------- */
 
@@ -159,7 +160,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
 	 * measure the interrupt frequency
 	 */
 	bc->debug_vals.cur_intcnt++;
-	if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+	if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
 		bc->debug_vals.last_jiffies = cur_jiffies;
 		bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
 		bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/baycom_ser_hdx.c b/drivers/net/hamradio/baycom_ser_hdx.c
index eead85d0096..be596a3eb3f 100644
--- a/drivers/net/hamradio/baycom_ser_hdx.c
+++ b/drivers/net/hamradio/baycom_ser_hdx.c
@@ -69,6 +69,7 @@
 #include <asm/io.h>
 #include <linux/hdlcdrv.h>
 #include <linux/baycom.h>
+#include <linux/jiffies.h>
 
 /* --------------------------------------------------------------------- */
 
@@ -150,7 +151,7 @@ static inline void baycom_int_freq(struct baycom_state *bc)
 	 * measure the interrupt frequency
 	 */
 	bc->debug_vals.cur_intcnt++;
-	if ((cur_jiffies - bc->debug_vals.last_jiffies) >= HZ) {
+	if (time_after_eq(cur_jiffies, bc->debug_vals.last_jiffies + HZ)) {
 		bc->debug_vals.last_jiffies = cur_jiffies;
 		bc->debug_vals.last_intcnt = bc->debug_vals.cur_intcnt;
 		bc->debug_vals.cur_intcnt = 0;
diff --git a/drivers/net/hamradio/bpqether.c b/drivers/net/hamradio/bpqether.c
index ba9f0580e1f..2946e037a9b 100644
--- a/drivers/net/hamradio/bpqether.c
+++ b/drivers/net/hamradio/bpqether.c
@@ -98,7 +98,7 @@ static char bcast_addr[6]={0xFF,0xFF,0xFF,0xFF,0xFF,0xFF};
 
 static char bpq_eth_addr[6];
 
-static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *);
+static int bpq_rcv(struct sk_buff *, struct net_device *, struct packet_type *, struct net_device *);
 static int bpq_device_event(struct notifier_block *, unsigned long, void *);
 static const char *bpq_print_ethaddr(const unsigned char *);
 
@@ -165,7 +165,7 @@ static inline int dev_is_ethdev(struct net_device *dev)
 /*
  *	Receive an AX.25 frame via an ethernet interface.
  */
-static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype)
+static int bpq_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev)
 {
 	int len;
 	char * ptr;
diff --git a/drivers/net/hamradio/mkiss.c b/drivers/net/hamradio/mkiss.c
index 3035422f5ad..63b1a2b86ac 100644
--- a/drivers/net/hamradio/mkiss.c
+++ b/drivers/net/hamradio/mkiss.c
@@ -1,30 +1,19 @@
 /*
- *	MKISS Driver
+ *  This program is free software; you can distribute it and/or modify it
+ *  under the terms of the GNU General Public License (Version 2) as
+ *  published by the Free Software Foundation.
  *
- *	This module:
- *		This module is free software; you can redistribute it and/or
- *		modify it under the terms of the GNU General Public License
- *		as published by the Free Software Foundation; either version
- *		2 of the License, or (at your option) any later version.
+ *  This program is distributed in the hope it will be useful, but WITHOUT
+ *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+ *  for more details.
  *
- * 		This module implements the AX.25 protocol for kernel-based
- *		devices like TTYs. It interfaces between a raw TTY, and the
- *		kernel's AX.25 protocol layers, just like slip.c.
- *		AX.25 needs to be separated from slip.c while slip.c is no
- *		longer a static kernel device since it is a module.
- *		This method clears the way to implement other kiss protocols
- *		like mkiss smack g8bpq ..... so far only mkiss is implemented.
+ *  You should have received a copy of the GNU General Public License along
+ *  with this program; if not, write to the Free Software Foundation, Inc.,
+ *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
  *
- * Hans Alblas <hans@esrac.ele.tue.nl>
- *
- *	History
- *	Jonathan (G4KLX)	Fixed to match Linux networking changes - 2.1.15.
- *	Matthias (DG2FEF)       Added support for FlexNet CRC (on special request)
- *                              Fixed bug in ax25_close(): dev_lock_wait() was
- *                              called twice, causing a deadlock.
- *	Jeroen (PE1RXQ)		Removed old MKISS_MAGIC stuff and calls to
- *				MOD_*_USE_COUNT
- *				Remove cli() and fix rtnl lock usage.
+ * Copyright (C) Hans Alblas PE1AYX <hans@esrac.ele.tue.nl>
+ * Copyright (C) 2004, 05 Ralf Baechle DL5RB <ralf@linux-mips.org>
  */
 
 #include <linux/config.h>
@@ -46,177 +35,300 @@
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 #include <linux/if_arp.h>
+#include <linux/jiffies.h>
 
 #include <net/ax25.h>
 
-#include "mkiss.h"
-
 #ifdef CONFIG_INET
 #include <linux/ip.h>
 #include <linux/tcp.h>
 #endif
 
-static char banner[] __initdata = KERN_INFO "mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n";
-
-typedef struct ax25_ctrl {
-	struct ax_disp ctrl;	/* 				*/
-	struct net_device  dev;	/* the device			*/
-} ax25_ctrl_t;
-
-static ax25_ctrl_t **ax25_ctrls;
-
-int ax25_maxdev = AX25_MAXDEV;		/* Can be overridden with insmod! */
-
-static struct tty_ldisc	ax_ldisc;
-
-static int ax25_init(struct net_device *);
-static int kiss_esc(unsigned char *, unsigned char *, int);
-static int kiss_esc_crc(unsigned char *, unsigned char *, unsigned short, int);
-static void kiss_unesc(struct ax_disp *, unsigned char);
+#define AX_MTU		236
+
+/* SLIP/KISS protocol characters. */
+#define END             0300		/* indicates end of frame	*/
+#define ESC             0333		/* indicates byte stuffing	*/
+#define ESC_END         0334		/* ESC ESC_END means END 'data'	*/
+#define ESC_ESC         0335		/* ESC ESC_ESC means ESC 'data'	*/
+
+struct mkiss {
+	struct tty_struct	*tty;	/* ptr to TTY structure		*/
+	struct net_device	*dev;	/* easy for intr handling	*/
+
+	/* These are pointers to the malloc()ed frame buffers. */
+	spinlock_t		buflock;/* lock for rbuf and xbuf */
+	unsigned char		*rbuff;	/* receiver buffer		*/
+	int			rcount;	/* received chars counter       */
+	unsigned char		*xbuff;	/* transmitter buffer		*/
+	unsigned char		*xhead;	/* pointer to next byte to XMIT */
+	int			xleft;	/* bytes left in XMIT queue     */
+
+	struct net_device_stats	stats;
+
+	/* Detailed SLIP statistics. */
+	int		mtu;		/* Our mtu (to spot changes!)   */
+	int		buffsize;	/* Max buffers sizes            */
+
+	unsigned long	flags;		/* Flag values/ mode etc	*/
+					/* long req'd: used by set_bit --RR */
+#define AXF_INUSE	0		/* Channel in use               */
+#define AXF_ESCAPE	1               /* ESC received                 */
+#define AXF_ERROR	2               /* Parity, etc. error           */
+#define AXF_KEEPTEST	3		/* Keepalive test flag		*/
+#define AXF_OUTWAIT	4		/* is outpacket was flag	*/
+
+	int		mode;
+        int		crcmode;	/* MW: for FlexNet, SMACK etc.  */
+#define CRC_MODE_NONE   0
+#define CRC_MODE_FLEX   1
+#define CRC_MODE_SMACK  2
+
+	atomic_t		refcnt;
+	struct semaphore	dead_sem;
+};
 
 /*---------------------------------------------------------------------------*/
 
-static const unsigned short Crc_flex_table[] = {
-  0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38,
-  0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770,
-  0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9,
-  0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1,
-  0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a,
-  0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672,
-  0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb,
-  0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3,
-  0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c,
-  0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574,
-  0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd,
-  0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5,
-  0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e,
-  0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476,
-  0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf,
-  0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7,
-  0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30,
-  0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378,
-  0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1,
-  0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9,
-  0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32,
-  0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a,
-  0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3,
-  0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb,
-  0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34,
-  0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c,
-  0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5,
-  0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd,
-  0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36,
-  0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e,
-  0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7,
-  0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff
+static const unsigned short crc_flex_table[] = {
+	0x0f87, 0x1e0e, 0x2c95, 0x3d1c, 0x49a3, 0x582a, 0x6ab1, 0x7b38,
+	0x83cf, 0x9246, 0xa0dd, 0xb154, 0xc5eb, 0xd462, 0xe6f9, 0xf770,
+	0x1f06, 0x0e8f, 0x3c14, 0x2d9d, 0x5922, 0x48ab, 0x7a30, 0x6bb9,
+	0x934e, 0x82c7, 0xb05c, 0xa1d5, 0xd56a, 0xc4e3, 0xf678, 0xe7f1,
+	0x2e85, 0x3f0c, 0x0d97, 0x1c1e, 0x68a1, 0x7928, 0x4bb3, 0x5a3a,
+	0xa2cd, 0xb344, 0x81df, 0x9056, 0xe4e9, 0xf560, 0xc7fb, 0xd672,
+	0x3e04, 0x2f8d, 0x1d16, 0x0c9f, 0x7820, 0x69a9, 0x5b32, 0x4abb,
+	0xb24c, 0xa3c5, 0x915e, 0x80d7, 0xf468, 0xe5e1, 0xd77a, 0xc6f3,
+	0x4d83, 0x5c0a, 0x6e91, 0x7f18, 0x0ba7, 0x1a2e, 0x28b5, 0x393c,
+	0xc1cb, 0xd042, 0xe2d9, 0xf350, 0x87ef, 0x9666, 0xa4fd, 0xb574,
+	0x5d02, 0x4c8b, 0x7e10, 0x6f99, 0x1b26, 0x0aaf, 0x3834, 0x29bd,
+	0xd14a, 0xc0c3, 0xf258, 0xe3d1, 0x976e, 0x86e7, 0xb47c, 0xa5f5,
+	0x6c81, 0x7d08, 0x4f93, 0x5e1a, 0x2aa5, 0x3b2c, 0x09b7, 0x183e,
+	0xe0c9, 0xf140, 0xc3db, 0xd252, 0xa6ed, 0xb764, 0x85ff, 0x9476,
+	0x7c00, 0x6d89, 0x5f12, 0x4e9b, 0x3a24, 0x2bad, 0x1936, 0x08bf,
+	0xf048, 0xe1c1, 0xd35a, 0xc2d3, 0xb66c, 0xa7e5, 0x957e, 0x84f7,
+	0x8b8f, 0x9a06, 0xa89d, 0xb914, 0xcdab, 0xdc22, 0xeeb9, 0xff30,
+	0x07c7, 0x164e, 0x24d5, 0x355c, 0x41e3, 0x506a, 0x62f1, 0x7378,
+	0x9b0e, 0x8a87, 0xb81c, 0xa995, 0xdd2a, 0xcca3, 0xfe38, 0xefb1,
+	0x1746, 0x06cf, 0x3454, 0x25dd, 0x5162, 0x40eb, 0x7270, 0x63f9,
+	0xaa8d, 0xbb04, 0x899f, 0x9816, 0xeca9, 0xfd20, 0xcfbb, 0xde32,
+	0x26c5, 0x374c, 0x05d7, 0x145e, 0x60e1, 0x7168, 0x43f3, 0x527a,
+	0xba0c, 0xab85, 0x991e, 0x8897, 0xfc28, 0xeda1, 0xdf3a, 0xceb3,
+	0x3644, 0x27cd, 0x1556, 0x04df, 0x7060, 0x61e9, 0x5372, 0x42fb,
+	0xc98b, 0xd802, 0xea99, 0xfb10, 0x8faf, 0x9e26, 0xacbd, 0xbd34,
+	0x45c3, 0x544a, 0x66d1, 0x7758, 0x03e7, 0x126e, 0x20f5, 0x317c,
+	0xd90a, 0xc883, 0xfa18, 0xeb91, 0x9f2e, 0x8ea7, 0xbc3c, 0xadb5,
+	0x5542, 0x44cb, 0x7650, 0x67d9, 0x1366, 0x02ef, 0x3074, 0x21fd,
+	0xe889, 0xf900, 0xcb9b, 0xda12, 0xaead, 0xbf24, 0x8dbf, 0x9c36,
+	0x64c1, 0x7548, 0x47d3, 0x565a, 0x22e5, 0x336c, 0x01f7, 0x107e,
+	0xf808, 0xe981, 0xdb1a, 0xca93, 0xbe2c, 0xafa5, 0x9d3e, 0x8cb7,
+	0x7440, 0x65c9, 0x5752, 0x46db, 0x3264, 0x23ed, 0x1176, 0x00ff
 };
 
-/*---------------------------------------------------------------------------*/
-
 static unsigned short calc_crc_flex(unsigned char *cp, int size)
 {
-    unsigned short crc = 0xffff;
-    
-    while (size--)
-	crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
+	unsigned short crc = 0xffff;
 
-    return crc;
-}
+	while (size--)
+		crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
 
-/*---------------------------------------------------------------------------*/
+	return crc;
+}
 
 static int check_crc_flex(unsigned char *cp, int size)
 {
-  unsigned short crc = 0xffff;
+	unsigned short crc = 0xffff;
 
-  if (size < 3)
-      return -1;
+	if (size < 3)
+		return -1;
 
-  while (size--)
-      crc = (crc << 8) ^ Crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
+	while (size--)
+		crc = (crc << 8) ^ crc_flex_table[((crc >> 8) ^ *cp++) & 0xff];
 
-  if ((crc & 0xffff) != 0x7070) 
-      return -1;
+	if ((crc & 0xffff) != 0x7070)
+		return -1;
 
-  return 0;
+	return 0;
 }
 
-/*---------------------------------------------------------------------------*/
+/*
+ * Standard encapsulation
+ */
 
-/* Find a free channel, and link in this `tty' line. */
-static inline struct ax_disp *ax_alloc(void)
+static int kiss_esc(unsigned char *s, unsigned char *d, int len)
 {
-	ax25_ctrl_t *axp=NULL;
-	int i;
+	unsigned char *ptr = d;
+	unsigned char c;
 
-	for (i = 0; i < ax25_maxdev; i++) {
-		axp = ax25_ctrls[i];
+	/*
+	 * Send an initial END character to flush out any data that may have
+	 * accumulated in the receiver due to line noise.
+	 */
 
-		/* Not allocated ? */
-		if (axp == NULL)
-			break;
+	*ptr++ = END;
 
-		/* Not in use ? */
-		if (!test_and_set_bit(AXF_INUSE, &axp->ctrl.flags))
+	while (len-- > 0) {
+		switch (c = *s++) {
+		case END:
+			*ptr++ = ESC;
+			*ptr++ = ESC_END;
 			break;
+		case ESC:
+			*ptr++ = ESC;
+			*ptr++ = ESC_ESC;
+			break;
+		default:
+			*ptr++ = c;
+			break;
+		}
 	}
 
-	/* Sorry, too many, all slots in use */
-	if (i >= ax25_maxdev)
-		return NULL;
+	*ptr++ = END;
+
+	return ptr - d;
+}
+
+/*
+ * MW:
+ * OK its ugly, but tell me a better solution without copying the
+ * packet to a temporary buffer :-)
+ */
+static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc,
+	int len)
+{
+	unsigned char *ptr = d;
+	unsigned char c=0;
+
+	*ptr++ = END;
+	while (len > 0) {
+		if (len > 2)
+			c = *s++;
+		else if (len > 1)
+			c = crc >> 8;
+		else if (len > 0)
+			c = crc & 0xff;
+
+		len--;
 
-	/* If no channels are available, allocate one */
-	if (axp == NULL && (ax25_ctrls[i] = kmalloc(sizeof(ax25_ctrl_t), GFP_KERNEL)) != NULL) {
-		axp = ax25_ctrls[i];
+		switch (c) {
+		case END:
+			*ptr++ = ESC;
+			*ptr++ = ESC_END;
+			break;
+		case ESC:
+			*ptr++ = ESC;
+			*ptr++ = ESC_ESC;
+			break;
+		default:
+			*ptr++ = c;
+			break;
+		}
 	}
-	memset(axp, 0, sizeof(ax25_ctrl_t));
-
-	/* Initialize channel control data */
-	set_bit(AXF_INUSE, &axp->ctrl.flags);
-	sprintf(axp->dev.name, "ax%d", i++);
-	axp->ctrl.tty      = NULL;
-	axp->dev.base_addr = i;
-	axp->dev.priv      = (void *)&axp->ctrl;
-	axp->dev.next      = NULL;
-	axp->dev.init      = ax25_init;
-
-	if (axp != NULL) {
-		/*
-		 * register device so that it can be ifconfig'ed
-		 * ax25_init() will be called as a side-effect
-		 * SIDE-EFFECT WARNING: ax25_init() CLEARS axp->ctrl !
-		 */
-		if (register_netdev(&axp->dev) == 0) {
-			/* (Re-)Set the INUSE bit.   Very Important! */
-			set_bit(AXF_INUSE, &axp->ctrl.flags);
-			axp->ctrl.dev = &axp->dev;
-			axp->dev.priv = (void *) &axp->ctrl;
-
-			return &axp->ctrl;
-		} else {
-			clear_bit(AXF_INUSE,&axp->ctrl.flags);
-			printk(KERN_ERR "mkiss: ax_alloc() - register_netdev() failure.\n");
+	*ptr++ = END;
+
+	return ptr - d;
+}
+
+/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */
+static void ax_bump(struct mkiss *ax)
+{
+	struct sk_buff *skb;
+	int count;
+
+	spin_lock_bh(&ax->buflock);
+	if (ax->rbuff[0] > 0x0f) {
+		if (ax->rbuff[0] & 0x20) {
+		        ax->crcmode = CRC_MODE_FLEX;
+			if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
+			        ax->stats.rx_errors++;
+				return;
+			}
+			ax->rcount -= 2;
+                        /* dl9sau bugfix: the trailling two bytes flexnet crc
+                         * will not be passed to the kernel. thus we have
+                         * to correct the kissparm signature, because it
+                         * indicates a crc but there's none
+			 */
+                        *ax->rbuff &= ~0x20;
 		}
+ 	}
+	spin_unlock_bh(&ax->buflock);
+
+	count = ax->rcount;
+
+	if ((skb = dev_alloc_skb(count)) == NULL) {
+		printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n",
+		       ax->dev->name);
+		ax->stats.rx_dropped++;
+		return;
 	}
 
-	return NULL;
+	spin_lock_bh(&ax->buflock);
+	memcpy(skb_put(skb,count), ax->rbuff, count);
+	spin_unlock_bh(&ax->buflock);
+	skb->protocol = ax25_type_trans(skb, ax->dev);
+	netif_rx(skb);
+	ax->dev->last_rx = jiffies;
+	ax->stats.rx_packets++;
+	ax->stats.rx_bytes += count;
 }
 
-/* Free an AX25 channel. */
-static inline void ax_free(struct ax_disp *ax)
+static void kiss_unesc(struct mkiss *ax, unsigned char s)
 {
-	/* Free all AX25 frame buffers. */
-	if (ax->rbuff)
-		kfree(ax->rbuff);
-	ax->rbuff = NULL;
-	if (ax->xbuff)
-		kfree(ax->xbuff);
-	ax->xbuff = NULL;
-	if (!test_and_clear_bit(AXF_INUSE, &ax->flags))
-		printk(KERN_ERR "mkiss: %s: ax_free for already free unit.\n", ax->dev->name);
+	switch (s) {
+	case END:
+		/* drop keeptest bit = VSV */
+		if (test_bit(AXF_KEEPTEST, &ax->flags))
+			clear_bit(AXF_KEEPTEST, &ax->flags);
+
+		if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2))
+			ax_bump(ax);
+
+		clear_bit(AXF_ESCAPE, &ax->flags);
+		ax->rcount = 0;
+		return;
+
+	case ESC:
+		set_bit(AXF_ESCAPE, &ax->flags);
+		return;
+	case ESC_ESC:
+		if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
+			s = ESC;
+		break;
+	case ESC_END:
+		if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
+			s = END;
+		break;
+	}
+
+	spin_lock_bh(&ax->buflock);
+	if (!test_bit(AXF_ERROR, &ax->flags)) {
+		if (ax->rcount < ax->buffsize) {
+			ax->rbuff[ax->rcount++] = s;
+			spin_unlock_bh(&ax->buflock);
+			return;
+		}
+
+		ax->stats.rx_over_errors++;
+		set_bit(AXF_ERROR, &ax->flags);
+	}
+	spin_unlock_bh(&ax->buflock);
+}
+
+static int ax_set_mac_address(struct net_device *dev, void *addr)
+{
+	struct sockaddr_ax25 *sa = addr;
+
+	spin_lock_irq(&dev->xmit_lock);
+	memcpy(dev->dev_addr, &sa->sax25_call, AX25_ADDR_LEN);
+	spin_unlock_irq(&dev->xmit_lock);
+
+	return 0;
 }
 
-static void ax_changedmtu(struct ax_disp *ax)
+/*---------------------------------------------------------------------------*/
+
+static void ax_changedmtu(struct mkiss *ax)
 {
 	struct net_device *dev = ax->dev;
 	unsigned char *xbuff, *rbuff, *oxbuff, *orbuff;
@@ -236,7 +348,8 @@ static void ax_changedmtu(struct ax_disp *ax)
 	rbuff = kmalloc(len + 4, GFP_ATOMIC);
 
 	if (xbuff == NULL || rbuff == NULL)  {
-		printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, MTU change cancelled.\n",
+		printk(KERN_ERR "mkiss: %s: unable to grow ax25 buffers, "
+		       "MTU change cancelled.\n",
 		       ax->dev->name);
 		dev->mtu = ax->mtu;
 		if (xbuff != NULL)
@@ -258,7 +371,7 @@ static void ax_changedmtu(struct ax_disp *ax)
 			memcpy(ax->xbuff, ax->xhead, ax->xleft);
 		} else  {
 			ax->xleft = 0;
-			ax->tx_dropped++;
+			ax->stats.tx_dropped++;
 		}
 	}
 
@@ -269,7 +382,7 @@ static void ax_changedmtu(struct ax_disp *ax)
 			memcpy(ax->rbuff, orbuff, ax->rcount);
 		} else  {
 			ax->rcount = 0;
-			ax->rx_over_errors++;
+			ax->stats.rx_over_errors++;
 			set_bit(AXF_ERROR, &ax->flags);
 		}
 	}
@@ -279,72 +392,14 @@ static void ax_changedmtu(struct ax_disp *ax)
 
 	spin_unlock_bh(&ax->buflock);
 
-	if (oxbuff != NULL)
-		kfree(oxbuff);
-	if (orbuff != NULL)
-		kfree(orbuff);
-}
-
-
-/* Set the "sending" flag.  This must be atomic. */
-static inline void ax_lock(struct ax_disp *ax)
-{
-	netif_stop_queue(ax->dev);
-}
-
-
-/* Clear the "sending" flag.  This must be atomic. */
-static inline void ax_unlock(struct ax_disp *ax)
-{
-	netif_start_queue(ax->dev);
-}
-
-/* Send one completely decapsulated AX.25 packet to the AX.25 layer. */
-static void ax_bump(struct ax_disp *ax)
-{
-	struct sk_buff *skb;
-	int count;
-
-	spin_lock_bh(&ax->buflock);
-	if (ax->rbuff[0] > 0x0f) {
-		if (ax->rbuff[0] & 0x20) {
-		        ax->crcmode = CRC_MODE_FLEX;
-			if (check_crc_flex(ax->rbuff, ax->rcount) < 0) {
-			        ax->rx_errors++;
-				return;
-			}
-			ax->rcount -= 2;
-                        /* dl9sau bugfix: the trailling two bytes flexnet crc
-                         * will not be passed to the kernel. thus we have
-                         * to correct the kissparm signature, because it
-                         * indicates a crc but there's none
-			 */
-                        *ax->rbuff &= ~0x20;
-		}
- 	}
-	spin_unlock_bh(&ax->buflock);
-
-	count = ax->rcount;
-
-	if ((skb = dev_alloc_skb(count)) == NULL) {
-		printk(KERN_ERR "mkiss: %s: memory squeeze, dropping packet.\n", ax->dev->name);
-		ax->rx_dropped++;
-		return;
-	}
-
-	spin_lock_bh(&ax->buflock);
-	memcpy(skb_put(skb,count), ax->rbuff, count);
-	spin_unlock_bh(&ax->buflock);
-	skb->protocol = ax25_type_trans(skb, ax->dev);
-	netif_rx(skb);
-	ax->dev->last_rx = jiffies;
-	ax->rx_packets++;
-	ax->rx_bytes+=count;
+	kfree(oxbuff);
+	kfree(orbuff);
 }
 
 /* Encapsulate one AX.25 packet and stuff into a TTY queue. */
-static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
+static void ax_encaps(struct net_device *dev, unsigned char *icp, int len)
 {
+	struct mkiss *ax = netdev_priv(dev);
 	unsigned char *p;
 	int actual, count;
 
@@ -354,8 +409,8 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
 	if (len > ax->mtu) {		/* Sigh, shouldn't occur BUT ... */
 		len = ax->mtu;
 		printk(KERN_ERR "mkiss: %s: truncating oversized transmit packet!\n", ax->dev->name);
-		ax->tx_dropped++;
-		ax_unlock(ax);
+		ax->stats.tx_dropped++;
+		netif_start_queue(dev);
 		return;
 	}
 
@@ -376,10 +431,11 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
 		 break;
 	}
 	
-	ax->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+	set_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
 	actual = ax->tty->driver->write(ax->tty, ax->xbuff, count);
-	ax->tx_packets++;
-	ax->tx_bytes+=actual;
+	ax->stats.tx_packets++;
+	ax->stats.tx_bytes += actual;
+
 	ax->dev->trans_start = jiffies;
 	ax->xleft = count - actual;
 	ax->xhead = ax->xbuff + actual;
@@ -387,37 +443,10 @@ static void ax_encaps(struct ax_disp *ax, unsigned char *icp, int len)
 	spin_unlock_bh(&ax->buflock);
 }
 
-/*
- * Called by the driver when there's room for more data.  If we have
- * more packets to send, we send them here.
- */
-static void ax25_write_wakeup(struct tty_struct *tty)
-{
-	int actual;
-	struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
-
-	/* First make sure we're connected. */
-	if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
-		return;
-	if (ax->xleft <= 0)  {
-		/* Now serial buffer is almost free & we can start
-		 * transmission of another packet
-		 */
-		tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
-
-		netif_wake_queue(ax->dev);
-		return;
-	}
-
-	actual = tty->driver->write(tty, ax->xhead, ax->xleft);
-	ax->xleft -= actual;
-	ax->xhead += actual;
-}
-
 /* Encapsulate an AX.25 packet and kick it into a TTY queue. */
 static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 {
-	struct ax_disp *ax = netdev_priv(dev);
+	struct mkiss *ax = netdev_priv(dev);
 
 	if (!netif_running(dev))  {
 		printk(KERN_ERR "mkiss: %s: xmit call when iface is down\n", dev->name);
@@ -429,7 +458,7 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		 * May be we must check transmitter timeout here ?
 		 *      14 Oct 1994 Dmitry Gorodchanin.
 		 */
-		if (jiffies - dev->trans_start  < 20 * HZ) {
+		if (time_before(jiffies, dev->trans_start + 20 * HZ)) {
 			/* 20 sec timeout not reached */
 			return 1;
 		}
@@ -439,20 +468,30 @@ static int ax_xmit(struct sk_buff *skb, struct net_device *dev)
 		       "bad line quality" : "driver error");
 
 		ax->xleft = 0;
-		ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
-		ax_unlock(ax);
+		clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
+		netif_start_queue(dev);
 	}
 
 	/* We were not busy, so we are now... :-) */
 	if (skb != NULL) {
-		ax_lock(ax);
-		ax_encaps(ax, skb->data, skb->len);
+		netif_stop_queue(dev);
+		ax_encaps(dev, skb->data, skb->len);
 		kfree_skb(skb);
 	}
 
 	return 0;
 }
 
+static int ax_open_dev(struct net_device *dev)
+{
+	struct mkiss *ax = netdev_priv(dev);
+
+	if (ax->tty == NULL)
+		return -ENODEV;
+
+	return 0;
+}
+
 #if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
 
 /* Return the frame type ID */
@@ -481,7 +520,7 @@ static int ax_rebuild_header(struct sk_buff *skb)
 /* Open the low-level part of the AX25 channel. Easy! */
 static int ax_open(struct net_device *dev)
 {
-	struct ax_disp *ax = netdev_priv(dev);
+	struct mkiss *ax = netdev_priv(dev);
 	unsigned long len;
 
 	if (ax->tty == NULL)
@@ -518,7 +557,6 @@ static int ax_open(struct net_device *dev)
 
 	spin_lock_init(&ax->buflock);
 
-	netif_start_queue(dev);
 	return 0;
 
 noxbuff:
@@ -532,68 +570,100 @@ norbuff:
 /* Close the low-level part of the AX25 channel. Easy! */
 static int ax_close(struct net_device *dev)
 {
-	struct ax_disp *ax = netdev_priv(dev);
+	struct mkiss *ax = netdev_priv(dev);
 
-	if (ax->tty == NULL)
-		return -EBUSY;
-
-	ax->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+	if (ax->tty)
+		clear_bit(TTY_DO_WRITE_WAKEUP, &ax->tty->flags);
 
 	netif_stop_queue(dev);
 
 	return 0;
 }
 
-static int ax25_receive_room(struct tty_struct *tty)
+static struct net_device_stats *ax_get_stats(struct net_device *dev)
 {
-	return 65536;  /* We can handle an infinite amount of data. :-) */
+	struct mkiss *ax = netdev_priv(dev);
+
+	return &ax->stats;
+}
+
+static void ax_setup(struct net_device *dev)
+{
+	static char ax25_bcast[AX25_ADDR_LEN] =
+		{'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
+	static char ax25_test[AX25_ADDR_LEN] =
+		{'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
+
+	/* Finish setting up the DEVICE info. */
+	dev->mtu             = AX_MTU;
+	dev->hard_start_xmit = ax_xmit;
+	dev->open            = ax_open_dev;
+	dev->stop            = ax_close;
+	dev->get_stats	     = ax_get_stats;
+	dev->set_mac_address = ax_set_mac_address;
+	dev->hard_header_len = 0;
+	dev->addr_len        = 0;
+	dev->type            = ARPHRD_AX25;
+	dev->tx_queue_len    = 10;
+	dev->hard_header     = ax_header;
+	dev->rebuild_header  = ax_rebuild_header;
+
+	memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
+	memcpy(dev->dev_addr,  ax25_test,  AX25_ADDR_LEN);
+
+	dev->flags      = IFF_BROADCAST | IFF_MULTICAST;
 }
 
 /*
- * Handle the 'receiver data ready' interrupt.
- * This function is called by the 'tty_io' module in the kernel when
- * a block of data has been received, which can now be decapsulated
- * and sent on to the AX.25 layer for further processing.
+ * We have a potential race on dereferencing tty->disc_data, because the tty
+ * layer provides no locking at all - thus one cpu could be running
+ * sixpack_receive_buf while another calls sixpack_close, which zeroes
+ * tty->disc_data and frees the memory that sixpack_receive_buf is using.  The
+ * best way to fix this is to use a rwlock in the tty struct, but for now we
+ * use a single global rwlock for all ttys in ppp line discipline.
  */
-static void ax25_receive_buf(struct tty_struct *tty, const unsigned char *cp, char *fp, int count)
+static rwlock_t disc_data_lock = RW_LOCK_UNLOCKED;
+
+static struct mkiss *mkiss_get(struct tty_struct *tty)
 {
-	struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+	struct mkiss *ax;
 
-	if (ax == NULL || ax->magic != AX25_MAGIC || !netif_running(ax->dev))
-		return;
+	read_lock(&disc_data_lock);
+	ax = tty->disc_data;
+	if (ax)
+		atomic_inc(&ax->refcnt);
+	read_unlock(&disc_data_lock);
 
-	/*
-	 * Argh! mtu change time! - costs us the packet part received
-	 * at the change
-	 */
-	if (ax->mtu != ax->dev->mtu + 73)
-		ax_changedmtu(ax);
-
-	/* Read the characters out of the buffer */
-	while (count--) {
-		if (fp != NULL && *fp++) {
-			if (!test_and_set_bit(AXF_ERROR, &ax->flags))
-				ax->rx_errors++;
-			cp++;
-			continue;
-		}
+	return ax;
+}
 
-		kiss_unesc(ax, *cp++);
-	}
+static void mkiss_put(struct mkiss *ax)
+{
+	if (atomic_dec_and_test(&ax->refcnt))
+		up(&ax->dead_sem);
 }
 
-static int ax25_open(struct tty_struct *tty)
+static int mkiss_open(struct tty_struct *tty)
 {
-	struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+	struct net_device *dev;
+	struct mkiss *ax;
 	int err;
 
-	/* First make sure we're not already connected. */
-	if (ax && ax->magic == AX25_MAGIC)
-		return -EEXIST;
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
 
-	/* OK.  Find a free AX25 channel to use. */
-	if ((ax = ax_alloc()) == NULL)
-		return -ENFILE;
+	dev = alloc_netdev(sizeof(struct mkiss), "ax%d", ax_setup);
+	if (!dev) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	ax = netdev_priv(dev);
+	ax->dev = dev;
+
+	spin_lock_init(&ax->buflock);
+	atomic_set(&ax->refcnt, 1);
+	init_MUTEX_LOCKED(&ax->dead_sem);
 
 	ax->tty = tty;
 	tty->disc_data = ax;
@@ -602,283 +672,212 @@ static int ax25_open(struct tty_struct *tty)
 		tty->driver->flush_buffer(tty);
 
 	/* Restore default settings */
-	ax->dev->type = ARPHRD_AX25;
+	dev->type = ARPHRD_AX25;
 
 	/* Perform the low-level AX25 initialization. */
-	if ((err = ax_open(ax->dev)))
-		return err;
+	if ((err = ax_open(ax->dev))) {
+		goto out_free_netdev;
+	}
 
-	/* Done.  We have linked the TTY line to a channel. */
-	return ax->dev->base_addr;
-}
+	if (register_netdev(dev))
+		goto out_free_buffers;
 
-static void ax25_close(struct tty_struct *tty)
-{
-	struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
+	netif_start_queue(dev);
 
-	/* First make sure we're connected. */
-	if (ax == NULL || ax->magic != AX25_MAGIC)
-		return;
+	/* Done.  We have linked the TTY line to a channel. */
+	return 0;
 
-	unregister_netdev(ax->dev);
+out_free_buffers:
+	kfree(ax->rbuff);
+	kfree(ax->xbuff);
 
-	tty->disc_data = NULL;
-	ax->tty        = NULL;
+out_free_netdev:
+	free_netdev(dev);
 
-	ax_free(ax);
+out:
+	return err;
 }
 
-
-static struct net_device_stats *ax_get_stats(struct net_device *dev)
+static void mkiss_close(struct tty_struct *tty)
 {
-	static struct net_device_stats stats;
-	struct ax_disp *ax = netdev_priv(dev);
-
-	memset(&stats, 0, sizeof(struct net_device_stats));
-
-	stats.rx_packets     = ax->rx_packets;
-	stats.tx_packets     = ax->tx_packets;
-	stats.rx_bytes	     = ax->rx_bytes;
-	stats.tx_bytes       = ax->tx_bytes;
-	stats.rx_dropped     = ax->rx_dropped;
-	stats.tx_dropped     = ax->tx_dropped;
-	stats.tx_errors      = ax->tx_errors;
-	stats.rx_errors      = ax->rx_errors;
-	stats.rx_over_errors = ax->rx_over_errors;
-
-	return &stats;
-}
+	struct mkiss *ax;
 
+	write_lock(&disc_data_lock);
+	ax = tty->disc_data;
+	tty->disc_data = NULL;
+	write_unlock(&disc_data_lock);
 
-/************************************************************************
- *			   STANDARD ENCAPSULATION	        	 *
- ************************************************************************/
-
-static int kiss_esc(unsigned char *s, unsigned char *d, int len)
-{
-	unsigned char *ptr = d;
-	unsigned char c;
+	if (ax == 0)
+		return;
 
 	/*
-	 * Send an initial END character to flush out any
-	 * data that may have accumulated in the receiver
-	 * due to line noise.
+	 * We have now ensured that nobody can start using ap from now on, but
+	 * we have to wait for all existing users to finish.
 	 */
+	if (!atomic_dec_and_test(&ax->refcnt))
+		down(&ax->dead_sem);
 
-	*ptr++ = END;
-
-	while (len-- > 0) {
-		switch (c = *s++) {
-			case END:
-				*ptr++ = ESC;
-				*ptr++ = ESC_END;
-				break;
-			case ESC:
-				*ptr++ = ESC;
-				*ptr++ = ESC_ESC;
-				break;
-			default:
-				*ptr++ = c;
-				break;
-		}
-	}
+	unregister_netdev(ax->dev);
 
-	*ptr++ = END;
+	/* Free all AX25 frame buffers. */
+	kfree(ax->rbuff);
+	kfree(ax->xbuff);
 
-	return ptr - d;
+	ax->tty = NULL;
 }
 
-/*
- * MW:
- * OK its ugly, but tell me a better solution without copying the
- * packet to a temporary buffer :-)
- */
-static int kiss_esc_crc(unsigned char *s, unsigned char *d, unsigned short crc, int len)
+/* Perform I/O control on an active ax25 channel. */
+static int mkiss_ioctl(struct tty_struct *tty, struct file *file,
+	unsigned int cmd, unsigned long arg)
 {
-	unsigned char *ptr = d;
-	unsigned char c=0;
-
-	*ptr++ = END;
-	while (len > 0) {
-		if (len > 2) 
-			c = *s++;
-		else if (len > 1)
-			c = crc >> 8;
-		else if (len > 0)
-			c = crc & 0xff;
+	struct mkiss *ax = mkiss_get(tty);
+	struct net_device *dev = ax->dev;
+	unsigned int tmp, err;
 
-		len--;
+	/* First make sure we're connected. */
+	if (ax == NULL)
+		return -ENXIO;
 
-		switch (c) {
-                        case END:
-                                *ptr++ = ESC;
-                                *ptr++ = ESC_END;
-                                break;
-                        case ESC:
-                                *ptr++ = ESC;
-                                *ptr++ = ESC_ESC;
-                                break;
-                        default:
-                                *ptr++ = c;
-                                break;
+	switch (cmd) {
+ 	case SIOCGIFNAME:
+		err = copy_to_user((void __user *) arg, ax->dev->name,
+		                   strlen(ax->dev->name) + 1) ? -EFAULT : 0;
+		break;
+
+	case SIOCGIFENCAP:
+		err = put_user(4, (int __user *) arg);
+		break;
+
+	case SIOCSIFENCAP:
+		if (get_user(tmp, (int __user *) arg)) {
+			err = -EFAULT;
+			break;
 		}
-	}
-	*ptr++ = END;
-	return ptr - d;		
-}
 
-static void kiss_unesc(struct ax_disp *ax, unsigned char s)
-{
-	switch (s) {
-		case END:
-			/* drop keeptest bit = VSV */
-			if (test_bit(AXF_KEEPTEST, &ax->flags))
-				clear_bit(AXF_KEEPTEST, &ax->flags);
+		ax->mode = tmp;
+		dev->addr_len        = AX25_ADDR_LEN;
+		dev->hard_header_len = AX25_KISS_HEADER_LEN +
+		                       AX25_MAX_HEADER_LEN + 3;
+		dev->type            = ARPHRD_AX25;
 
-			if (!test_and_clear_bit(AXF_ERROR, &ax->flags) && (ax->rcount > 2))
-				ax_bump(ax);
+		err = 0;
+		break;
 
-			clear_bit(AXF_ESCAPE, &ax->flags);
-			ax->rcount = 0;
-			return;
+	case SIOCSIFHWADDR: {
+		char addr[AX25_ADDR_LEN];
+printk(KERN_INFO "In SIOCSIFHWADDR");
 
-		case ESC:
-			set_bit(AXF_ESCAPE, &ax->flags);
-			return;
-		case ESC_ESC:
-			if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
-				s = ESC;
+		if (copy_from_user(&addr,
+		                   (void __user *) arg, AX25_ADDR_LEN)) {
+			err = -EFAULT;
 			break;
-		case ESC_END:
-			if (test_and_clear_bit(AXF_ESCAPE, &ax->flags))
-				s = END;
-			break;
-	}
-
-	spin_lock_bh(&ax->buflock);
-	if (!test_bit(AXF_ERROR, &ax->flags)) {
-		if (ax->rcount < ax->buffsize) {
-			ax->rbuff[ax->rcount++] = s;
-			spin_unlock_bh(&ax->buflock);
-			return;
 		}
 
-		ax->rx_over_errors++;
-		set_bit(AXF_ERROR, &ax->flags);
+		spin_lock_irq(&dev->xmit_lock);
+		memcpy(dev->dev_addr, addr, AX25_ADDR_LEN);
+		spin_unlock_irq(&dev->xmit_lock);
+
+		err = 0;
+		break;
+	}
+	default:
+		err = -ENOIOCTLCMD;
 	}
-	spin_unlock_bh(&ax->buflock);
-}
 
+	mkiss_put(ax);
 
-static int ax_set_mac_address(struct net_device *dev, void __user *addr)
-{
-	if (copy_from_user(dev->dev_addr, addr, AX25_ADDR_LEN))
-		return -EFAULT;
-	return 0;
+	return err;
 }
 
-static int ax_set_dev_mac_address(struct net_device *dev, void *addr)
+/*
+ * Handle the 'receiver data ready' interrupt.
+ * This function is called by the 'tty_io' module in the kernel when
+ * a block of data has been received, which can now be decapsulated
+ * and sent on to the AX.25 layer for further processing.
+ */
+static void mkiss_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+	char *fp, int count)
 {
-	struct sockaddr *sa = addr;
-
-	memcpy(dev->dev_addr, sa->sa_data, AX25_ADDR_LEN);
+	struct mkiss *ax = mkiss_get(tty);
 
-	return 0;
-}
-
-
-/* Perform I/O control on an active ax25 channel. */
-static int ax25_disp_ioctl(struct tty_struct *tty, void *file, int cmd, void __user *arg)
-{
-	struct ax_disp *ax = (struct ax_disp *) tty->disc_data;
-	unsigned int tmp;
+	if (!ax)
+		return;
 
-	/* First make sure we're connected. */
-	if (ax == NULL || ax->magic != AX25_MAGIC)
-		return -EINVAL;
+	/*
+	 * Argh! mtu change time! - costs us the packet part received
+	 * at the change
+	 */
+	if (ax->mtu != ax->dev->mtu + 73)
+		ax_changedmtu(ax);
 
-	switch (cmd) {
-	 	case SIOCGIFNAME:
-			if (copy_to_user(arg, ax->dev->name, strlen(ax->dev->name) + 1))
-				return -EFAULT;
-			return 0;
-
-		case SIOCGIFENCAP:
-			return put_user(4, (int __user *)arg);
-
-		case SIOCSIFENCAP:
-			if (get_user(tmp, (int __user *)arg))
-				return -EFAULT;
-			ax->mode = tmp;
-			ax->dev->addr_len        = AX25_ADDR_LEN;	  /* sizeof an AX.25 addr */
-			ax->dev->hard_header_len = AX25_KISS_HEADER_LEN + AX25_MAX_HEADER_LEN + 3;
-			ax->dev->type            = ARPHRD_AX25;
-			return 0;
-
-		 case SIOCSIFHWADDR:
-			return ax_set_mac_address(ax->dev, arg);
+	/* Read the characters out of the buffer */
+	while (count--) {
+		if (fp != NULL && *fp++) {
+			if (!test_and_set_bit(AXF_ERROR, &ax->flags))
+				ax->stats.rx_errors++;
+			cp++;
+			continue;
+		}
 
-		default:
-			return -ENOIOCTLCMD;
+		kiss_unesc(ax, *cp++);
 	}
+
+	mkiss_put(ax);
+	if (test_and_clear_bit(TTY_THROTTLED, &tty->flags)
+	    && tty->driver->unthrottle)
+		tty->driver->unthrottle(tty);
 }
 
-static int ax_open_dev(struct net_device *dev)
+static int mkiss_receive_room(struct tty_struct *tty)
 {
-	struct ax_disp *ax = netdev_priv(dev);
-
-	if (ax->tty == NULL)
-		return -ENODEV;
-
-	return 0;
+	return 65536;  /* We can handle an infinite amount of data. :-) */
 }
 
-
-/* Initialize the driver.  Called by network startup. */
-static int ax25_init(struct net_device *dev)
+/*
+ * Called by the driver when there's room for more data.  If we have
+ * more packets to send, we send them here.
+ */
+static void mkiss_write_wakeup(struct tty_struct *tty)
 {
-	struct ax_disp *ax = netdev_priv(dev);
-
-	static char ax25_bcast[AX25_ADDR_LEN] =
-		{'Q'<<1,'S'<<1,'T'<<1,' '<<1,' '<<1,' '<<1,'0'<<1};
-	static char ax25_test[AX25_ADDR_LEN] =
-		{'L'<<1,'I'<<1,'N'<<1,'U'<<1,'X'<<1,' '<<1,'1'<<1};
-
-	if (ax == NULL)		/* Allocation failed ?? */
-		return -ENODEV;
+	struct mkiss *ax = mkiss_get(tty);
+	int actual;
 
-	/* Set up the "AX25 Control Block". (And clear statistics) */
-	memset(ax, 0, sizeof (struct ax_disp));
-	ax->magic  = AX25_MAGIC;
-	ax->dev	   = dev;
+	if (!ax)
+		return;
 
-	/* Finish setting up the DEVICE info. */
-	dev->mtu             = AX_MTU;
-	dev->hard_start_xmit = ax_xmit;
-	dev->open            = ax_open_dev;
-	dev->stop            = ax_close;
-	dev->get_stats	     = ax_get_stats;
-	dev->set_mac_address = ax_set_dev_mac_address;
-	dev->hard_header_len = 0;
-	dev->addr_len        = 0;
-	dev->type            = ARPHRD_AX25;
-	dev->tx_queue_len    = 10;
-	dev->hard_header     = ax_header;
-	dev->rebuild_header  = ax_rebuild_header;
+	if (ax->xleft <= 0)  {
+		/* Now serial buffer is almost free & we can start
+		 * transmission of another packet
+		 */
+		clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
 
-	memcpy(dev->broadcast, ax25_bcast, AX25_ADDR_LEN);
-	memcpy(dev->dev_addr,  ax25_test,  AX25_ADDR_LEN);
+		netif_wake_queue(ax->dev);
+		goto out;
+	}
 
-	/* New-style flags. */
-	dev->flags      = IFF_BROADCAST | IFF_MULTICAST;
+	actual = tty->driver->write(tty, ax->xhead, ax->xleft);
+	ax->xleft -= actual;
+	ax->xhead += actual;
 
-	return 0;
+out:
+	mkiss_put(ax);
 }
 
+static struct tty_ldisc ax_ldisc = {
+	.magic		= TTY_LDISC_MAGIC,
+	.name		= "mkiss",
+	.open		= mkiss_open,
+	.close		= mkiss_close,
+	.ioctl		= mkiss_ioctl,
+	.receive_buf	= mkiss_receive_buf,
+	.receive_room	= mkiss_receive_room,
+	.write_wakeup	= mkiss_write_wakeup
+};
 
-/* ******************************************************************** */
-/* *			Init MKISS driver			      * */
-/* ******************************************************************** */
+static char banner[] __initdata = KERN_INFO \
+	"mkiss: AX.25 Multikiss, Hans Albas PE1AYX\n";
+static char msg_regfail[] __initdata = KERN_ERR \
+	"mkiss: can't register line discipline (err = %d)\n";
 
 static int __init mkiss_init_driver(void)
 {
@@ -886,64 +885,27 @@ static int __init mkiss_init_driver(void)
 
 	printk(banner);
 
-	if (ax25_maxdev < 4)
-	  ax25_maxdev = 4; /* Sanity */
+	if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0)
+		printk(msg_regfail);
 
-	if ((ax25_ctrls = kmalloc(sizeof(void *) * ax25_maxdev, GFP_KERNEL)) == NULL) {
-		printk(KERN_ERR "mkiss: Can't allocate ax25_ctrls[] array!\n");
-		return -ENOMEM;
-	}
-
-	/* Clear the pointer array, we allocate devices when we need them */
-	memset(ax25_ctrls, 0, sizeof(void*) * ax25_maxdev); /* Pointers */
-
-	/* Fill in our line protocol discipline, and register it */
-	ax_ldisc.magic		= TTY_LDISC_MAGIC;
-	ax_ldisc.name		= "mkiss";
-	ax_ldisc.open		= ax25_open;
-	ax_ldisc.close		= ax25_close;
-	ax_ldisc.ioctl		= (int (*)(struct tty_struct *, struct file *,
-					unsigned int, unsigned long))ax25_disp_ioctl;
-	ax_ldisc.receive_buf	= ax25_receive_buf;
-	ax_ldisc.receive_room	= ax25_receive_room;
-	ax_ldisc.write_wakeup	= ax25_write_wakeup;
-
-	if ((status = tty_register_ldisc(N_AX25, &ax_ldisc)) != 0) {
-		printk(KERN_ERR "mkiss: can't register line discipline (err = %d)\n", status);
-		kfree(ax25_ctrls);
-	}
 	return status;
 }
 
+static const char msg_unregfail[] __exitdata = KERN_ERR \
+	"mkiss: can't unregister line discipline (err = %d)\n";
+
 static void __exit mkiss_exit_driver(void)
 {
-	int i;
-
-	for (i = 0; i < ax25_maxdev; i++) {
-		if (ax25_ctrls[i]) {
-			/*
-			* VSV = if dev->start==0, then device
-			* unregistered while close proc.
-			*/
-			if (netif_running(&ax25_ctrls[i]->dev))
-				unregister_netdev(&ax25_ctrls[i]->dev);
-			kfree(ax25_ctrls[i]);
-		}
-	}
+	int ret;
 
-	kfree(ax25_ctrls);
-	ax25_ctrls = NULL;
-
-	if ((i = tty_unregister_ldisc(N_AX25)))
-		printk(KERN_ERR "mkiss: can't unregister line discipline (err = %d)\n", i);
+	if ((ret = tty_unregister_ldisc(N_AX25)))
+		printk(msg_unregfail, ret);
 }
 
-MODULE_AUTHOR("Hans Albas PE1AYX <hans@esrac.ele.tue.nl>");
+MODULE_AUTHOR("Ralf Baechle DL5RB <ralf@linux-mips.org>");
 MODULE_DESCRIPTION("KISS driver for AX.25 over TTYs");
-MODULE_PARM(ax25_maxdev, "i");
-MODULE_PARM_DESC(ax25_maxdev, "number of MKISS devices");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_LDISC(N_AX25);
+
 module_init(mkiss_init_driver);
 module_exit(mkiss_exit_driver);
-
diff --git a/drivers/net/ibm_emac/ibm_emac_core.c b/drivers/net/ibm_emac/ibm_emac_core.c
index c7fb3675c09..0de3bb90617 100644
--- a/drivers/net/ibm_emac/ibm_emac_core.c
+++ b/drivers/net/ibm_emac/ibm_emac_core.c
@@ -1253,7 +1253,7 @@ static int emac_init_tah(struct ocp_enet_private *fep)
 		 TAH_MR_CVR | TAH_MR_ST_768 | TAH_MR_TFS_10KB | TAH_MR_DTFP |
 		 TAH_MR_DIG);
 
-	iounmap(&tahp);
+	iounmap(tahp);
 
 	return 0;
 }
diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c
index c39b0609742..32d5fabd4b1 100644
--- a/drivers/net/ibmveth.c
+++ b/drivers/net/ibmveth.c
@@ -1144,7 +1144,7 @@ static void ibmveth_proc_unregister_driver(void)
 
 static struct vio_device_id ibmveth_device_table[] __devinitdata= {
 	{ "network", "IBM,l-lan"},
-	{ 0,}
+	{ "", "" }
 };
 
 MODULE_DEVICE_TABLE(vio, ibmveth_device_table);
diff --git a/drivers/net/iseries_veth.c b/drivers/net/iseries_veth.c
index 55af32e9bf0..183ba97785b 100644
--- a/drivers/net/iseries_veth.c
+++ b/drivers/net/iseries_veth.c
@@ -1370,7 +1370,7 @@ static int veth_probe(struct vio_dev *vdev, const struct vio_device_id *id)
  */
 static struct vio_device_id veth_device_table[] __devinitdata = {
 	{ "vlan", "" },
-	{ NULL, NULL }
+	{ "", "" }
 };
 MODULE_DEVICE_TABLE(vio, veth_device_table);
 
diff --git a/drivers/net/ixgb/ixgb.h b/drivers/net/ixgb/ixgb.h
index f8d3385c784..c83271b3862 100644
--- a/drivers/net/ixgb/ixgb.h
+++ b/drivers/net/ixgb/ixgb.h
@@ -119,7 +119,7 @@ struct ixgb_adapter;
  * so a DMA handle can be stored along with the buffer */
 struct ixgb_buffer {
 	struct sk_buff *skb;
-	uint64_t dma;
+	dma_addr_t dma;
 	unsigned long time_stamp;
 	uint16_t length;
 	uint16_t next_to_watch;
diff --git a/drivers/net/ixgb/ixgb_ee.c b/drivers/net/ixgb/ixgb_ee.c
index 3aae110c556..661a46b95a6 100644
--- a/drivers/net/ixgb/ixgb_ee.c
+++ b/drivers/net/ixgb/ixgb_ee.c
@@ -565,24 +565,6 @@ ixgb_get_ee_mac_addr(struct ixgb_hw *hw,
 	}
 }
 
-/******************************************************************************
- * return the compatibility flags from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          compatibility flags if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_compatibility(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->compatibility));
-
-	return(0);
-}
 
 /******************************************************************************
  * return the Printed Board Assembly number from EEPROM
@@ -602,81 +584,6 @@ ixgb_get_ee_pba_number(struct ixgb_hw *hw)
 	return(0);
 }
 
-/******************************************************************************
- * return the Initialization Control Word 1 from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          Initialization Control Word 1 if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->init_ctrl_reg_1));
-
-	return(0);
-}
-
-/******************************************************************************
- * return the Initialization Control Word 2 from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          Initialization Control Word 2 if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->init_ctrl_reg_2));
-
-	return(0);
-}
-
-/******************************************************************************
- * return the Subsystem Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          Subsystem Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_subsystem_id(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->subsystem_id));
-
-	return(0);
-}
-
-/******************************************************************************
- * return the Sub Vendor Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          Sub Vendor Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_subvendor_id(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->subvendor_id));
-
-	return(0);
-}
 
 /******************************************************************************
  * return the Device Id from EEPROM
@@ -694,81 +601,6 @@ ixgb_get_ee_device_id(struct ixgb_hw *hw)
 	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
 		return (le16_to_cpu(ee_map->device_id));
 
-	return(0);
-}
-
-/******************************************************************************
- * return the Vendor Id from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          Device Id if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_vendor_id(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->vendor_id));
-
-	return(0);
-}
-
-/******************************************************************************
- * return the Software Defined Pins Register from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          SDP Register if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint16_t
-ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->swdpins_reg));
-
-	return(0);
+	return (0);
 }
 
-/******************************************************************************
- * return the D3 Power Management Bits from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          D3 Power Management Bits if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint8_t
-ixgb_get_ee_d3_power(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->d3_power));
-
-	return(0);
-}
-
-/******************************************************************************
- * return the D0 Power Management Bits from EEPROM
- *
- * hw - Struct containing variables accessed by shared code
- *
- * Returns:
- *          D0 Power Management Bits if EEPROM contents are valid, 0 otherwise
- ******************************************************************************/
-uint8_t
-ixgb_get_ee_d0_power(struct ixgb_hw *hw)
-{
-	struct ixgb_ee_map_type *ee_map = (struct ixgb_ee_map_type *)hw->eeprom;
-
-	if(ixgb_check_and_get_eeprom_data(hw) == TRUE)
-		return (le16_to_cpu(ee_map->d0_power));
-
-	return(0);
-}
diff --git a/drivers/net/ixgb/ixgb_ethtool.c b/drivers/net/ixgb/ixgb_ethtool.c
index 3fa113854ee..9d026ed77dd 100644
--- a/drivers/net/ixgb/ixgb_ethtool.c
+++ b/drivers/net/ixgb/ixgb_ethtool.c
@@ -98,10 +98,10 @@ static struct ixgb_stats ixgb_gstrings_stats[] = {
 static int
 ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	ecmd->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
-	ecmd->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
+	ecmd->advertising = (ADVERTISED_10000baseT_Full | ADVERTISED_FIBRE);
 	ecmd->port = PORT_FIBRE;
 	ecmd->transceiver = XCVR_EXTERNAL;
 
@@ -120,7 +120,7 @@ ixgb_get_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 static int
 ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	if(ecmd->autoneg == AUTONEG_ENABLE ||
 	   ecmd->speed + ecmd->duplex != SPEED_10000 + DUPLEX_FULL)
@@ -130,6 +130,12 @@ ixgb_set_settings(struct net_device *netdev, struct ethtool_cmd *ecmd)
 		ixgb_down(adapter, TRUE);
 		ixgb_reset(adapter);
 		ixgb_up(adapter);
+		/* be optimistic about our link, since we were up before */
+		adapter->link_speed = 10000;
+		adapter->link_duplex = FULL_DUPLEX;
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
+		
 	} else
 		ixgb_reset(adapter);
 
@@ -140,7 +146,7 @@ static void
 ixgb_get_pauseparam(struct net_device *netdev,
 			 struct ethtool_pauseparam *pause)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	
 	pause->autoneg = AUTONEG_DISABLE;
@@ -159,7 +165,7 @@ static int
 ixgb_set_pauseparam(struct net_device *netdev,
 			 struct ethtool_pauseparam *pause)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	
 	if(pause->autoneg == AUTONEG_ENABLE)
@@ -177,6 +183,11 @@ ixgb_set_pauseparam(struct net_device *netdev,
 	if(netif_running(adapter->netdev)) {
 		ixgb_down(adapter, TRUE);
 		ixgb_up(adapter);
+		/* be optimistic about our link, since we were up before */
+		adapter->link_speed = 10000;
+		adapter->link_duplex = FULL_DUPLEX;
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
 	} else
 		ixgb_reset(adapter);
 		
@@ -186,19 +197,26 @@ ixgb_set_pauseparam(struct net_device *netdev,
 static uint32_t
 ixgb_get_rx_csum(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
+
 	return adapter->rx_csum;
 }
 
 static int
 ixgb_set_rx_csum(struct net_device *netdev, uint32_t data)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
+
 	adapter->rx_csum = data;
 
 	if(netif_running(netdev)) {
 		ixgb_down(adapter,TRUE);
 		ixgb_up(adapter);
+		/* be optimistic about our link, since we were up before */
+		adapter->link_speed = 10000;
+		adapter->link_duplex = FULL_DUPLEX;
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
 	} else
 		ixgb_reset(adapter);
 	return 0;
@@ -246,14 +264,15 @@ static void
 ixgb_get_regs(struct net_device *netdev,
 		   struct ethtool_regs *regs, void *p)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	uint32_t *reg = p;
 	uint32_t *reg_start = reg;
 	uint8_t i;
 
 	/* the 1 (one) below indicates an attempt at versioning, if the
-	 * interface in ethtool or the driver this 1 should be incremented */
+	 * interface in ethtool or the driver changes, this 1 should be
+	 * incremented */
 	regs->version = (1<<24) | hw->revision_id << 16 | hw->device_id;
 
 	/* General Registers */
@@ -283,7 +302,8 @@ ixgb_get_regs(struct net_device *netdev,
 	*reg++ = IXGB_READ_REG(hw, RAIDC);	/*  19 */
 	*reg++ = IXGB_READ_REG(hw, RXCSUM);	/*  20 */
 
-	for (i = 0; i < IXGB_RAR_ENTRIES; i++) {
+	/* there are 16 RAR entries in hardware, we only use 3 */
+	for(i = 0; i < 16; i++) {
 		*reg++ = IXGB_READ_REG_ARRAY(hw, RAL, (i << 1)); /*21,...,51 */
 		*reg++ = IXGB_READ_REG_ARRAY(hw, RAH, (i << 1)); /*22,...,52 */
 	}
@@ -391,7 +411,7 @@ static int
 ixgb_get_eeprom(struct net_device *netdev,
 		  struct ethtool_eeprom *eeprom, uint8_t *bytes)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	uint16_t *eeprom_buff;
 	int i, max_len, first_word, last_word;
@@ -439,7 +459,7 @@ static int
 ixgb_set_eeprom(struct net_device *netdev,
 		  struct ethtool_eeprom *eeprom, uint8_t *bytes)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	uint16_t *eeprom_buff;
 	void *ptr;
@@ -497,7 +517,7 @@ static void
 ixgb_get_drvinfo(struct net_device *netdev,
 		   struct ethtool_drvinfo *drvinfo)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	strncpy(drvinfo->driver,  ixgb_driver_name, 32);
 	strncpy(drvinfo->version, ixgb_driver_version, 32);
@@ -512,7 +532,7 @@ static void
 ixgb_get_ringparam(struct net_device *netdev,
 		struct ethtool_ringparam *ring)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_desc_ring *txdr = &adapter->tx_ring;
 	struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
 
@@ -530,7 +550,7 @@ static int
 ixgb_set_ringparam(struct net_device *netdev,
 		struct ethtool_ringparam *ring)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_desc_ring *txdr = &adapter->tx_ring;
 	struct ixgb_desc_ring *rxdr = &adapter->rx_ring;
 	struct ixgb_desc_ring tx_old, tx_new, rx_old, rx_new;
@@ -573,6 +593,11 @@ ixgb_set_ringparam(struct net_device *netdev,
 		adapter->tx_ring = tx_new;
 		if((err = ixgb_up(adapter)))
 			return err;
+		/* be optimistic about our link, since we were up before */
+		adapter->link_speed = 10000;
+		adapter->link_duplex = FULL_DUPLEX;
+		netif_carrier_on(netdev);
+		netif_wake_queue(netdev);
 	}
 
 	return 0;
@@ -607,7 +632,7 @@ ixgb_led_blink_callback(unsigned long data)
 static int
 ixgb_phys_id(struct net_device *netdev, uint32_t data)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	if(!data || data > (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ))
 		data = (uint32_t)(MAX_SCHEDULE_TIMEOUT / HZ);
@@ -643,7 +668,7 @@ static void
 ixgb_get_ethtool_stats(struct net_device *netdev, 
 		struct ethtool_stats *stats, uint64_t *data)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int i;
 
 	ixgb_update_stats(adapter);
diff --git a/drivers/net/ixgb/ixgb_hw.h b/drivers/net/ixgb/ixgb_hw.h
index 97898efe7cc..8bcf31ed10c 100644
--- a/drivers/net/ixgb/ixgb_hw.h
+++ b/drivers/net/ixgb/ixgb_hw.h
@@ -822,17 +822,8 @@ extern void ixgb_clear_vfta(struct ixgb_hw *hw);
 
 /* Access functions to eeprom data */
 void ixgb_get_ee_mac_addr(struct ixgb_hw *hw, uint8_t *mac_addr);
-uint16_t ixgb_get_ee_compatibility(struct ixgb_hw *hw);
 uint32_t ixgb_get_ee_pba_number(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_init_ctrl_reg_1(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_init_ctrl_reg_2(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_subsystem_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_subvendor_id(struct ixgb_hw *hw);
 uint16_t ixgb_get_ee_device_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_vendor_id(struct ixgb_hw *hw);
-uint16_t ixgb_get_ee_swdpins_reg(struct ixgb_hw *hw);
-uint8_t ixgb_get_ee_d3_power(struct ixgb_hw *hw);
-uint8_t ixgb_get_ee_d0_power(struct ixgb_hw *hw);
 boolean_t ixgb_get_eeprom_data(struct ixgb_hw *hw);
 uint16_t ixgb_get_eeprom_word(struct ixgb_hw *hw, uint16_t index);
 
diff --git a/drivers/net/ixgb/ixgb_main.c b/drivers/net/ixgb/ixgb_main.c
index 097b90ccf57..5c555373adb 100644
--- a/drivers/net/ixgb/ixgb_main.c
+++ b/drivers/net/ixgb/ixgb_main.c
@@ -29,6 +29,11 @@
 #include "ixgb.h"
 
 /* Change Log
+ * 1.0.96 04/19/05
+ * - Make needlessly global code static -- bunk@stusta.de
+ * - ethtool cleanup -- shemminger@osdl.org
+ * - Support for MODULE_VERSION -- linville@tuxdriver.com
+ * - add skb_header_cloned check to the tso path -- herbert@apana.org.au
  * 1.0.88 01/05/05
  * - include fix to the condition that determines when to quit NAPI - Robert Olsson
  * - use netif_poll_{disable/enable} to synchronize between NAPI and i/f up/down
@@ -47,10 +52,9 @@ char ixgb_driver_string[] = "Intel(R) PRO/10GbE Network Driver";
 #else
 #define DRIVERNAPI "-NAPI"
 #endif
-
-#define DRV_VERSION "1.0.95-k2"DRIVERNAPI
+#define DRV_VERSION		"1.0.100-k2"DRIVERNAPI
 char ixgb_driver_version[] = DRV_VERSION;
-char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
+static char ixgb_copyright[] = "Copyright (c) 1999-2005 Intel Corporation.";
 
 /* ixgb_pci_tbl - PCI Device ID Table
  *
@@ -145,10 +149,12 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 /* some defines for controlling descriptor fetches in h/w */
-#define RXDCTL_PTHRESH_DEFAULT 128	/* chip considers prefech below this */
-#define RXDCTL_HTHRESH_DEFAULT 16	/* chip will only prefetch if tail is 
-					   pushed this many descriptors from head */
 #define RXDCTL_WTHRESH_DEFAULT 16	/* chip writes back at this many or RXT0 */
+#define RXDCTL_PTHRESH_DEFAULT 0		/* chip considers prefech below
+						 * this */
+#define RXDCTL_HTHRESH_DEFAULT 0		/* chip will only prefetch if tail
+						 * is pushed this many descriptors
+						 * from head */
 
 /**
  * ixgb_init_module - Driver Registration Routine
@@ -376,7 +382,7 @@ ixgb_probe(struct pci_dev *pdev,
 	SET_NETDEV_DEV(netdev, &pdev->dev);
 
 	pci_set_drvdata(pdev, netdev);
-	adapter = netdev->priv;
+	adapter = netdev_priv(netdev);
 	adapter->netdev = netdev;
 	adapter->pdev = pdev;
 	adapter->hw.back = adapter;
@@ -512,7 +518,7 @@ static void __devexit
 ixgb_remove(struct pci_dev *pdev)
 {
 	struct net_device *netdev = pci_get_drvdata(pdev);
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	unregister_netdev(netdev);
 
@@ -583,7 +589,7 @@ ixgb_sw_init(struct ixgb_adapter *adapter)
 static int
 ixgb_open(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int err;
 
 	/* allocate transmit descriptors */
@@ -626,7 +632,7 @@ err_setup_tx:
 static int
 ixgb_close(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	ixgb_down(adapter, TRUE);
 
@@ -1017,7 +1023,7 @@ ixgb_clean_rx_ring(struct ixgb_adapter *adapter)
 static int
 ixgb_set_mac(struct net_device *netdev, void *p)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct sockaddr *addr = p;
 
 	if(!is_valid_ether_addr(addr->sa_data))
@@ -1043,7 +1049,7 @@ ixgb_set_mac(struct net_device *netdev, void *p)
 static void
 ixgb_set_multi(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	struct dev_mc_list *mc_ptr;
 	uint32_t rctl;
@@ -1371,7 +1377,7 @@ ixgb_tx_queue(struct ixgb_adapter *adapter, int count, int vlan_id,int tx_flags)
 static int
 ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	unsigned int first;
 	unsigned int tx_flags = 0;
 	unsigned long flags;
@@ -1425,7 +1431,7 @@ ixgb_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 static void
 ixgb_tx_timeout(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	/* Do the reset outside of interrupt context */
 	schedule_work(&adapter->tx_timeout_task);
@@ -1434,7 +1440,7 @@ ixgb_tx_timeout(struct net_device *netdev)
 static void
 ixgb_tx_timeout_task(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	ixgb_down(adapter, TRUE);
 	ixgb_up(adapter);
@@ -1451,7 +1457,7 @@ ixgb_tx_timeout_task(struct net_device *netdev)
 static struct net_device_stats *
 ixgb_get_stats(struct net_device *netdev)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 
 	return &adapter->net_stats;
 }
@@ -1467,7 +1473,7 @@ ixgb_get_stats(struct net_device *netdev)
 static int
 ixgb_change_mtu(struct net_device *netdev, int new_mtu)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int max_frame = new_mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
 	int old_max_frame = netdev->mtu + ENET_HEADER_SIZE + ENET_FCS_LENGTH;
 
@@ -1522,7 +1528,8 @@ ixgb_update_stats(struct ixgb_adapter *adapter)
 
 		multi |= ((u64)IXGB_READ_REG(&adapter->hw, MPRCH) << 32);
 		/* fix up multicast stats by removing broadcasts */
-		multi -= bcast;
+		if(multi >= bcast)
+			multi -= bcast;
 		
 		adapter->stats.mprcl += (multi & 0xFFFFFFFF);
 		adapter->stats.mprch += (multi >> 32);
@@ -1641,7 +1648,7 @@ static irqreturn_t
 ixgb_intr(int irq, void *data, struct pt_regs *regs)
 {
 	struct net_device *netdev = data;
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	struct ixgb_hw *hw = &adapter->hw;
 	uint32_t icr = IXGB_READ_REG(hw, ICR);
 #ifndef CONFIG_IXGB_NAPI
@@ -1688,7 +1695,7 @@ ixgb_intr(int irq, void *data, struct pt_regs *regs)
 static int
 ixgb_clean(struct net_device *netdev, int *budget)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	int work_to_do = min(*budget, netdev->quota);
 	int tx_cleaned;
 	int work_done = 0;
@@ -2017,7 +2024,7 @@ ixgb_alloc_rx_buffers(struct ixgb_adapter *adapter)
 static void
 ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	uint32_t ctrl, rctl;
 
 	ixgb_irq_disable(adapter);
@@ -2055,7 +2062,7 @@ ixgb_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp)
 static void
 ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	uint32_t vfta, index;
 
 	/* add VID to filter table */
@@ -2069,7 +2076,7 @@ ixgb_vlan_rx_add_vid(struct net_device *netdev, uint16_t vid)
 static void
 ixgb_vlan_rx_kill_vid(struct net_device *netdev, uint16_t vid)
 {
-	struct ixgb_adapter *adapter = netdev->priv;
+	struct ixgb_adapter *adapter = netdev_priv(netdev);
 	uint32_t vfta, index;
 
 	ixgb_irq_disable(adapter);
diff --git a/drivers/net/jazzsonic.c b/drivers/net/jazzsonic.c
index 7fec613e167..8423cb6875f 100644
--- a/drivers/net/jazzsonic.c
+++ b/drivers/net/jazzsonic.c
@@ -1,5 +1,10 @@
 /*
- * sonic.c
+ * jazzsonic.c
+ *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, and (from the mac68k project) introduced
+ * dhd's support for 16-bit cards.
  *
  * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  * 
@@ -28,8 +33,8 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
-#include <linux/bitops.h>
 #include <linux/device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/bootinfo.h>
 #include <asm/system.h>
@@ -44,22 +49,20 @@ static struct platform_device *jazz_sonic_device;
 
 #define SONIC_MEM_SIZE	0x100
 
-#define SREGS_PAD(n)    u16 n;
-
 #include "sonic.h"
 
 /*
  * Macros to access SONIC registers
  */
-#define SONIC_READ(reg) (*((volatile unsigned int *)base_addr+reg))
+#define SONIC_READ(reg) (*((volatile unsigned int *)dev->base_addr+reg))
 
 #define SONIC_WRITE(reg,val)						\
 do {									\
-	*((volatile unsigned int *)base_addr+(reg)) = (val);		\
+	*((volatile unsigned int *)dev->base_addr+(reg)) = (val);		\
 } while (0)
 
 
-/* use 0 for production, 1 for verification, >2 for debug */
+/* use 0 for production, 1 for verification, >1 for debug */
 #ifdef SONIC_DEBUG
 static unsigned int sonic_debug = SONIC_DEBUG;
 #else 
@@ -85,18 +88,18 @@ static unsigned short known_revisions[] =
 	0xffff			/* end of list */
 };
 
-static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
-                               unsigned int irq)
+static int __init sonic_probe1(struct net_device *dev)
 {
 	static unsigned version_printed;
 	unsigned int silicon_revision;
 	unsigned int val;
-	struct sonic_local *lp;
+	struct sonic_local *lp = netdev_priv(dev);
 	int err = -ENODEV;
 	int i;
 
-	if (!request_mem_region(base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
+	if (!request_mem_region(dev->base_addr, SONIC_MEM_SIZE, jazz_sonic_string))
 		return -EBUSY;
+
 	/*
 	 * get the Silicon Revision ID. If this is one of the known
 	 * one assume that we found a SONIC ethernet controller at
@@ -120,11 +123,7 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
 	if (sonic_debug  &&  version_printed++ == 0)
 		printk(version);
 
-	printk("%s: Sonic ethernet found at 0x%08lx, ", dev->name, base_addr);
-
-	/* Fill in the 'dev' fields. */
-	dev->base_addr = base_addr;
-	dev->irq = irq;
+	printk(KERN_INFO "%s: Sonic ethernet found at 0x%08lx, ", lp->device->bus_id, dev->base_addr);
 
 	/*
 	 * Put the sonic into software reset, then
@@ -138,84 +137,44 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
 		dev->dev_addr[i*2+1] = val >> 8;
 	}
 
-	printk("HW Address ");
-	for (i = 0; i < 6; i++) {
-		printk("%2.2x", dev->dev_addr[i]);
-		if (i<5)
-			printk(":");
-	}
-
-	printk(" IRQ %d\n", irq);
-
 	err = -ENOMEM;
     
 	/* Initialize the device structure. */
-	if (dev->priv == NULL) {
-		/*
-		 * the memory be located in the same 64kb segment
-		 */
-		lp = NULL;
-		i = 0;
-		do {
-			lp = kmalloc(sizeof(*lp), GFP_KERNEL);
-			if ((unsigned long) lp >> 16
-			    != ((unsigned long)lp + sizeof(*lp) ) >> 16) {
-				/* FIXME, free the memory later */
-				kfree(lp);
-				lp = NULL;
-			}
-		} while (lp == NULL && i++ < 20);
-
-		if (lp == NULL) {
-			printk("%s: couldn't allocate memory for descriptors\n",
-			       dev->name);
-			goto out;
-		}
 
-		memset(lp, 0, sizeof(struct sonic_local));
-
-		/* get the virtual dma address */
-		lp->cda_laddr = vdma_alloc(CPHYSADDR(lp),sizeof(*lp));
-		if (lp->cda_laddr == ~0UL) {
-			printk("%s: couldn't get DMA page entry for "
-			       "descriptors\n", dev->name);
-			goto out1;
-		}
-
-		lp->tda_laddr = lp->cda_laddr + sizeof (lp->cda);
-		lp->rra_laddr = lp->tda_laddr + sizeof (lp->tda);
-		lp->rda_laddr = lp->rra_laddr + sizeof (lp->rra);
-	
-		/* allocate receive buffer area */
-		/* FIXME, maybe we should use skbs */
-		lp->rba = kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL);
-		if (!lp->rba) {
-			printk("%s: couldn't allocate receive buffers\n",
-			       dev->name);
-			goto out2;
-		}
+	lp->dma_bitmode = SONIC_BITMODE32;
 
-		/* get virtual dma address */
-		lp->rba_laddr = vdma_alloc(CPHYSADDR(lp->rba),
-		                           SONIC_NUM_RRS * SONIC_RBSIZE);
-		if (lp->rba_laddr == ~0UL) {
-			printk("%s: couldn't get DMA page entry for receive "
-			       "buffers\n",dev->name);
-			goto out3;
-		}
-
-		/* now convert pointer to KSEG1 pointer */
-		lp->rba = (char *)KSEG1ADDR(lp->rba);
-		flush_cache_all();
-		dev->priv = (struct sonic_local *)KSEG1ADDR(lp);
+	/* Allocate the entire chunk of memory for the descriptors.
+           Note that this cannot cross a 64K boundary. */
+	if ((lp->descriptors = dma_alloc_coherent(lp->device,
+				SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+				&lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
+		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
+		goto out;
 	}
 
-	lp = (struct sonic_local *)dev->priv;
+	/* Now set up the pointers to point to the appropriate places */
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
 	dev->open = sonic_open;
 	dev->stop = sonic_close;
 	dev->hard_start_xmit = sonic_send_packet;
-	dev->get_stats	= sonic_get_stats;
+	dev->get_stats = sonic_get_stats;
 	dev->set_multicast_list = &sonic_multicast_list;
+	dev->tx_timeout = sonic_tx_timeout;
 	dev->watchdog_timeo = TX_TIMEOUT;
 
 	/*
@@ -226,14 +185,8 @@ static int __init sonic_probe1(struct net_device *dev, unsigned long base_addr,
 	SONIC_WRITE(SONIC_MPT,0xffff);
 
 	return 0;
-out3:
-	kfree(lp->rba);
-out2:
-	vdma_free(lp->cda_laddr);
-out1:
-	kfree(lp);
 out:
-	release_region(base_addr, SONIC_MEM_SIZE);
+	release_region(dev->base_addr, SONIC_MEM_SIZE);
 	return err;
 }
 
@@ -245,7 +198,6 @@ static int __init jazz_sonic_probe(struct device *device)
 {
 	struct net_device *dev;
 	struct sonic_local *lp;
-	unsigned long base_addr;
 	int err = 0;
 	int i;
 
@@ -255,21 +207,26 @@ static int __init jazz_sonic_probe(struct device *device)
 	if (mips_machgroup != MACH_GROUP_JAZZ)
 		return -ENODEV;
 
-	dev = alloc_etherdev(0);
+	dev = alloc_etherdev(sizeof(struct sonic_local));
 	if (!dev)
 		return -ENOMEM;
 
+	lp = netdev_priv(dev);
+	lp->device = device;
+	SET_NETDEV_DEV(dev, device);
+ 	SET_MODULE_OWNER(dev);
+
 	netdev_boot_setup_check(dev);
-	base_addr = dev->base_addr;
 
-	if (base_addr >= KSEG0)	{ /* Check a single specified location. */
-		err = sonic_probe1(dev, base_addr, dev->irq);
-	} else if (base_addr != 0) { /* Don't probe at all. */
+	if (dev->base_addr >= KSEG0) { /* Check a single specified location. */
+		err = sonic_probe1(dev);
+	} else if (dev->base_addr != 0) { /* Don't probe at all. */
 		err = -ENXIO;
 	} else {
 		for (i = 0; sonic_portlist[i].port; i++) {
-			int io = sonic_portlist[i].port;
-			if (sonic_probe1(dev, io, sonic_portlist[i].irq) == 0)
+			dev->base_addr = sonic_portlist[i].port;
+			dev->irq = sonic_portlist[i].irq;
+			if (sonic_probe1(dev) == 0)
 				break;
 		}
 		if (!sonic_portlist[i].port)
@@ -281,14 +238,17 @@ static int __init jazz_sonic_probe(struct device *device)
 	if (err)
 		goto out1;
 
+	printk("%s: MAC ", dev->name);
+	for (i = 0; i < 6; i++) {
+		printk("%2.2x", dev->dev_addr[i]);
+		if (i < 5)
+			printk(":");
+	}
+	printk(" IRQ %d\n", dev->irq);
+
 	return 0;
 
 out1:
-	lp = dev->priv;
-	vdma_free(lp->rba_laddr);
-	kfree(lp->rba);
-	vdma_free(lp->cda_laddr);
-	kfree(lp);
 	release_region(dev->base_addr, SONIC_MEM_SIZE);
 out:
 	free_netdev(dev);
@@ -296,21 +256,22 @@ out:
 	return err;
 }
 
-/*
- *      SONIC uses a normal IRQ
- */
-#define sonic_request_irq       request_irq
-#define sonic_free_irq          free_irq
+MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
+MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
 
-#define sonic_chiptomem(x)      KSEG1ADDR(vdma_log2phys(x))
+#define SONIC_IRQ_FLAG SA_INTERRUPT
 
 #include "sonic.c"
 
 static int __devexit jazz_sonic_device_remove (struct device *device)
 {
 	struct net_device *dev = device->driver_data;
+	struct sonic_local* lp = netdev_priv(dev);
 
 	unregister_netdev (dev);
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	                  lp->descriptors, lp->descriptors_laddr);
 	release_region (dev->base_addr, SONIC_MEM_SIZE);
 	free_netdev (dev);
 
@@ -323,7 +284,7 @@ static struct device_driver jazz_sonic_driver = {
 	.probe	= jazz_sonic_probe,
 	.remove	= __devexit_p(jazz_sonic_device_remove),
 };
-                                                                                
+
 static void jazz_sonic_platform_release (struct device *device)
 {
 	struct platform_device *pldev;
@@ -336,10 +297,11 @@ static void jazz_sonic_platform_release (struct device *device)
 static int __init jazz_sonic_init_module(void)
 {
 	struct platform_device *pldev;
+	int err;
 
-	if (driver_register(&jazz_sonic_driver)) {
+	if ((err = driver_register(&jazz_sonic_driver))) {
 		printk(KERN_ERR "Driver registration failed\n");
-		return -ENOMEM;
+		return err;
 	}
 
 	jazz_sonic_device = NULL;
diff --git a/drivers/net/loopback.c b/drivers/net/loopback.c
index 1f61f0cc95d..690a1aae0b3 100644
--- a/drivers/net/loopback.c
+++ b/drivers/net/loopback.c
@@ -68,6 +68,7 @@ static DEFINE_PER_CPU(struct net_device_stats, loopback_stats);
  * of largesending device modulo TCP checksum, which is ignored for loopback.
  */
 
+#ifdef LOOPBACK_TSO
 static void emulate_large_send_offload(struct sk_buff *skb)
 {
 	struct iphdr *iph = skb->nh.iph;
@@ -119,6 +120,7 @@ static void emulate_large_send_offload(struct sk_buff *skb)
 
 	dev_kfree_skb(skb);
 }
+#endif /* LOOPBACK_TSO */
 
 /*
  * The higher levels take care of making this non-reentrant (it's
@@ -130,12 +132,13 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	skb_orphan(skb);
 
-	skb->protocol=eth_type_trans(skb,dev);
-	skb->dev=dev;
+	skb->protocol = eth_type_trans(skb,dev);
+	skb->dev = dev;
 #ifndef LOOPBACK_MUST_CHECKSUM
 	skb->ip_summed = CHECKSUM_UNNECESSARY;
 #endif
 
+#ifdef LOOPBACK_TSO
 	if (skb_shinfo(skb)->tso_size) {
 		BUG_ON(skb->protocol != htons(ETH_P_IP));
 		BUG_ON(skb->nh.iph->protocol != IPPROTO_TCP);
@@ -143,14 +146,14 @@ static int loopback_xmit(struct sk_buff *skb, struct net_device *dev)
 		emulate_large_send_offload(skb);
 		return 0;
 	}
-
+#endif
 	dev->last_rx = jiffies;
 
 	lb_stats = &per_cpu(loopback_stats, get_cpu());
 	lb_stats->rx_bytes += skb->len;
-	lb_stats->tx_bytes += skb->len;
+	lb_stats->tx_bytes = lb_stats->rx_bytes;
 	lb_stats->rx_packets++;
-	lb_stats->tx_packets++;
+	lb_stats->tx_packets = lb_stats->rx_packets;
 	put_cpu();
 
 	netif_rx(skb);
@@ -208,9 +211,12 @@ struct net_device loopback_dev = {
 	.type			= ARPHRD_LOOPBACK,	/* 0x0001*/
 	.rebuild_header		= eth_rebuild_header,
 	.flags			= IFF_LOOPBACK,
-	.features 		= NETIF_F_SG|NETIF_F_FRAGLIST
-				  |NETIF_F_NO_CSUM|NETIF_F_HIGHDMA
-				  |NETIF_F_LLTX,
+	.features 		= NETIF_F_SG | NETIF_F_FRAGLIST
+#ifdef LOOPBACK_TSO
+				  | NETIF_F_TSO
+#endif
+				  | NETIF_F_NO_CSUM | NETIF_F_HIGHDMA
+				  | NETIF_F_LLTX,
 	.ethtool_ops		= &loopback_ethtool_ops,
 };
 
diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
index be28c65de72..405e18365ed 100644
--- a/drivers/net/macsonic.c
+++ b/drivers/net/macsonic.c
@@ -1,6 +1,12 @@
 /*
  * macsonic.c
  *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, converted to unified driver model, made it work as
+ * a module again, and from the mac68k project, introduced more 32-bit cards
+ * and dhd's support for 16-bit cards.
+ *
  * (C) 1998 Alan Cox
  *
  * Debugging Andreas Ehliar, Michael Schmitz
@@ -26,8 +32,8 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/types.h>
-#include <linux/ctype.h>
 #include <linux/fcntl.h>
 #include <linux/interrupt.h>
 #include <linux/init.h>
@@ -41,8 +47,8 @@
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
-#include <linux/module.h>
-#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
 
 #include <asm/bootinfo.h>
 #include <asm/system.h>
@@ -54,25 +60,28 @@
 #include <asm/macints.h>
 #include <asm/mac_via.h>
 
-#define SREGS_PAD(n)    u16 n;
+static char mac_sonic_string[] = "macsonic";
+static struct platform_device *mac_sonic_device;
 
 #include "sonic.h"
 
-#define SONIC_READ(reg) \
-	nubus_readl(base_addr+(reg))
-#define SONIC_WRITE(reg,val) \
-	nubus_writel((val), base_addr+(reg))
-#define sonic_read(dev, reg) \
-	nubus_readl((dev)->base_addr+(reg))
-#define sonic_write(dev, reg, val) \
-	nubus_writel((val), (dev)->base_addr+(reg))
-
+/* These should basically be bus-size and endian independent (since
+   the SONIC is at least smart enough that it uses the same endianness
+   as the host, unlike certain less enlightened Macintosh NICs) */
+#define SONIC_READ(reg) (nubus_readw(dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+#define SONIC_WRITE(reg,val) (nubus_writew(val, dev->base_addr + (reg * 4) \
+	      + lp->reg_offset))
+
+/* use 0 for production, 1 for verification, >1 for debug */
+#ifdef SONIC_DEBUG
+static unsigned int sonic_debug = SONIC_DEBUG;
+#else 
+static unsigned int sonic_debug = 1;
+#endif
 
-static int sonic_debug;
 static int sonic_version_printed;
 
-static int reg_offset;
-
 extern int mac_onboard_sonic_probe(struct net_device* dev);
 extern int mac_nubus_sonic_probe(struct net_device* dev);
 
@@ -108,40 +117,6 @@ enum macsonic_type {
 
 #define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
 
-struct net_device * __init macsonic_probe(int unit)
-{
-	struct net_device *dev = alloc_etherdev(0);
-	int err;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0)
-		sprintf(dev->name, "eth%d", unit);
-
- 	SET_MODULE_OWNER(dev);
-
-	/* This will catch fatal stuff like -ENOMEM as well as success */
-	err = mac_onboard_sonic_probe(dev);
-	if (err == 0)
-		goto found;
-	if (err != -ENODEV)
-		goto out;
-	err = mac_nubus_sonic_probe(dev);
-	if (err)
-		goto out;
-found:
-	err = register_netdev(dev);
-	if (err)
-		goto out1;
-	return dev;
-out1:
-	kfree(dev->priv);
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
 /*
  * For reversing the PROM address
  */
@@ -160,103 +135,55 @@ static inline void bit_reverse_addr(unsigned char addr[6])
 
 int __init macsonic_init(struct net_device* dev)
 {
-	struct sonic_local* lp = NULL;
-	int i;
+	struct sonic_local* lp = netdev_priv(dev);
 
 	/* Allocate the entire chunk of memory for the descriptors.
            Note that this cannot cross a 64K boundary. */
-	for (i = 0; i < 20; i++) {
-		unsigned long desc_base, desc_top;
-		if((lp = kmalloc(sizeof(struct sonic_local), GFP_KERNEL | GFP_DMA)) == NULL) {
-			printk(KERN_ERR "%s: couldn't allocate descriptor buffers\n", dev->name);
-			return -ENOMEM;
-		}
-
-		desc_base = (unsigned long) lp;
-		desc_top = desc_base + sizeof(struct sonic_local);
-		if ((desc_top & 0xffff) >= (desc_base & 0xffff))
-			break;
-		/* Hmm. try again (FIXME: does this actually work?) */
-		kfree(lp);
-		printk(KERN_DEBUG
-		       "%s: didn't get continguous chunk [%08lx - %08lx], trying again\n",
-		       dev->name, desc_base, desc_top);
-	}
-
-	if (lp == NULL) {
-		printk(KERN_ERR "%s: tried 20 times to allocate descriptor buffers, giving up.\n",
-		       dev->name);
+	if ((lp->descriptors = dma_alloc_coherent(lp->device,
+	            SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	            &lp->descriptors_laddr, GFP_KERNEL)) == NULL) {
+		printk(KERN_ERR "%s: couldn't alloc DMA memory for descriptors.\n", lp->device->bus_id);
 		return -ENOMEM;
-	}		       
-
-	dev->priv = lp;
-
-#if 0
-	/* this code is only here as a curiousity...   mainly, where the 
-	   fuck did SONIC_BUS_SCALE come from, and what was it supposed
-	   to do?  the normal allocation works great for 32 bit stuffs..  */
+	}
 
 	/* Now set up the pointers to point to the appropriate places */
-	lp->cda = lp->sonic_desc;
-	lp->tda = lp->cda + (SIZEOF_SONIC_CDA * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->cda = lp->descriptors;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
-			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
-			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 
-#endif
-	
-	memset(lp, 0, sizeof(struct sonic_local));
-
-	lp->cda_laddr = (unsigned int)&(lp->cda);
-	lp->tda_laddr = (unsigned int)lp->tda;
-	lp->rra_laddr = (unsigned int)lp->rra;
-	lp->rda_laddr = (unsigned int)lp->rda;
-
-	/* FIXME, maybe we should use skbs */
-	if ((lp->rba = (char *)
-	     kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL | GFP_DMA)) == NULL) {
-		printk(KERN_ERR "%s: couldn't allocate receive buffers\n", dev->name);
-		dev->priv = NULL;
-		kfree(lp);
-		return -ENOMEM;
-	}
-
-	lp->rba_laddr = (unsigned int)lp->rba;
-
-	{
-		int rs, ds;
-
-		/* almost always 12*4096, but let's not take chances */
-		rs = ((SONIC_NUM_RRS * SONIC_RBSIZE + 4095) / 4096) * 4096;
-		/* almost always under a page, but let's not take chances */
-		ds = ((sizeof(struct sonic_local) + 4095) / 4096) * 4096;
-		kernel_set_cachemode(lp->rba, rs, IOMAP_NOCACHE_SER);
-		kernel_set_cachemode(lp, ds, IOMAP_NOCACHE_SER);
-	}
-	
-#if 0
-	flush_cache_all();
-#endif
+	lp->cda_laddr = lp->descriptors_laddr;
+	lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+	                     * SONIC_BUS_SCALE(lp->dma_bitmode));
 
 	dev->open = sonic_open;
 	dev->stop = sonic_close;
 	dev->hard_start_xmit = sonic_send_packet;
 	dev->get_stats = sonic_get_stats;
 	dev->set_multicast_list = &sonic_multicast_list;
+	dev->tx_timeout = sonic_tx_timeout;
+	dev->watchdog_timeo = TX_TIMEOUT;
 
 	/*
 	 * clear tally counter
 	 */
-	sonic_write(dev, SONIC_CRCT, 0xffff);
-	sonic_write(dev, SONIC_FAET, 0xffff);
-	sonic_write(dev, SONIC_MPT, 0xffff);
+	SONIC_WRITE(SONIC_CRCT, 0xffff);
+	SONIC_WRITE(SONIC_FAET, 0xffff);
+	SONIC_WRITE(SONIC_MPT, 0xffff);
 
 	return 0;
 }
 
 int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
 {
+	struct sonic_local *lp = netdev_priv(dev);
 	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
 	int i;
 
@@ -270,6 +197,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
 	   why this is so. */
 	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
 	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
 	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
 		bit_reverse_addr(dev->dev_addr);
 	else
@@ -281,22 +209,23 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
            the card... */
 	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
 	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
 	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
 	{
 		unsigned short val;
 
 		printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
 		
-		sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
-		sonic_write(dev, SONIC_CEP, 15);
+		SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+		SONIC_WRITE(SONIC_CEP, 15);
 
-		val = sonic_read(dev, SONIC_CAP2);
+		val = SONIC_READ(SONIC_CAP2);
 		dev->dev_addr[5] = val >> 8;
 		dev->dev_addr[4] = val & 0xff;
-		val = sonic_read(dev, SONIC_CAP1);
+		val = SONIC_READ(SONIC_CAP1);
 		dev->dev_addr[3] = val >> 8;
 		dev->dev_addr[2] = val & 0xff;
-		val = sonic_read(dev, SONIC_CAP0);
+		val = SONIC_READ(SONIC_CAP0);
 		dev->dev_addr[1] = val >> 8;
 		dev->dev_addr[0] = val & 0xff;
 		
@@ -311,6 +240,7 @@ int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
 
 	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
 	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x80\x19", 3) &&
 	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
 	{
 		/*
@@ -325,8 +255,9 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
 {
 	/* Bwahahaha */
 	static int once_is_more_than_enough;
-	int i;
-	int dma_bitmode;
+	struct sonic_local* lp = netdev_priv(dev);
+	int sr;
+	int commslot = 0;
 	
 	if (once_is_more_than_enough)
 		return -ENODEV;
@@ -335,20 +266,18 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
 	if (!MACH_IS_MAC)
 		return -ENODEV;
 
-	printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
-
 	if (macintosh_config->ether_type != MAC_ETHER_SONIC)
-	{
-		printk("none.\n");
 		return -ENODEV;
-	}
-
+	
+	printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
+	
 	/* Bogus probing, on the models which may or may not have
 	   Ethernet (BTW, the Ethernet *is* always at the same
 	   address, and nothing else lives there, at least if Apple's
 	   documentation is to be believed) */
 	if (macintosh_config->ident == MAC_MODEL_Q630 ||
 	    macintosh_config->ident == MAC_MODEL_P588 ||
+	    macintosh_config->ident == MAC_MODEL_P575 ||
 	    macintosh_config->ident == MAC_MODEL_C610) {
 		unsigned long flags;
 		int card_present;
@@ -361,13 +290,13 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
 			printk("none.\n");
 			return -ENODEV;
 		}
+		commslot = 1;
 	}
 
 	printk("yes\n");	
 
-	/* Danger!  My arms are flailing wildly!  You *must* set this
-           before using sonic_read() */
-
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
 	dev->base_addr = ONBOARD_SONIC_REGISTERS;
 	if (via_alt_mapping)
 		dev->irq = IRQ_AUTO_3;
@@ -379,84 +308,66 @@ int __init mac_onboard_sonic_probe(struct net_device* dev)
 		sonic_version_printed = 1;
 	}
 	printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
-	       dev->name, dev->base_addr);
-
-	/* Now do a song and dance routine in an attempt to determine
-           the bus width */
+	       lp->device->bus_id, dev->base_addr);
 
 	/* The PowerBook's SONIC is 16 bit always. */
 	if (macintosh_config->ident == MAC_MODEL_PB520) {
-		reg_offset = 0;
-		dma_bitmode = 0;
-	} else if (macintosh_config->ident == MAC_MODEL_C610) {
-		reg_offset = 0;
-		dma_bitmode = 1;
-	} else {
+		lp->reg_offset = 0;
+		lp->dma_bitmode = SONIC_BITMODE16;
+		sr = SONIC_READ(SONIC_SR);
+	} else if (commslot) {
 		/* Some of the comm-slot cards are 16 bit.  But some
-                   of them are not.  The 32-bit cards use offset 2 and
-                   pad with zeroes or sometimes ones (I think...)
-                   Therefore, if we try offset 0 and get a silicon
-                   revision of 0, we assume 16 bit. */
-		int sr;
-
-		/* Technically this is not necessary since we zeroed
-                   it above */
-		reg_offset = 0;
-		dma_bitmode = 0;
-		sr = sonic_read(dev, SONIC_SR);
-		if (sr == 0 || sr == 0xffff) {
-			reg_offset = 2;
-			/* 83932 is 0x0004, 83934 is 0x0100 or 0x0101 */
-			sr = sonic_read(dev, SONIC_SR);
-			dma_bitmode = 1;
-			
+		   of them are not.  The 32-bit cards use offset 2 and
+		   have known revisions, we try reading the revision
+		   register at offset 2, if we don't get a known revision
+		   we assume 16 bit at offset 0.  */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE16;
+
+		sr = SONIC_READ(SONIC_SR);
+		if (sr == 0x0004 || sr == 0x0006 || sr == 0x0100 || sr == 0x0101) 
+			/* 83932 is 0x0004 or 0x0006, 83934 is 0x0100 or 0x0101 */
+			lp->dma_bitmode = SONIC_BITMODE32;
+		else {
+			lp->dma_bitmode = SONIC_BITMODE16;
+			lp->reg_offset = 0;
+			sr = SONIC_READ(SONIC_SR);
 		}
-		printk(KERN_INFO
-		       "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
-		       dev->name, sr, dma_bitmode?32:16, reg_offset);
+	} else {
+		/* All onboard cards are at offset 2 with 32 bit DMA. */
+		lp->reg_offset = 2;
+		lp->dma_bitmode = SONIC_BITMODE32;
+		sr = SONIC_READ(SONIC_SR);
 	}
-	
+	printk(KERN_INFO
+	       "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+	       lp->device->bus_id, sr, lp->dma_bitmode?32:16, lp->reg_offset);
 
-	/* this carries my sincere apologies -- by the time I got to updating
-	   the driver, support for "reg_offsets" appeares nowhere in the sonic
-	   code, going back for over a year.  Fortunately, my Mac does't seem
-	   to use whatever this was.
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
 
-	   If you know how this is supposed to be implemented, either fix it,
-	   or contact me (sammy@oh.verio.com) to explain what it is. --Sam */
-	   
-	if(reg_offset) {
-		printk("%s: register offset unsupported.  please fix this if you know what it is.\n", dev->name);
-		return -ENODEV;
-	}
-	
 	/* Software reset, then initialize control registers. */
-	sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
-	sonic_write(dev, SONIC_DCR, SONIC_DCR_BMS |
-		    SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_EXBUS |
-		    (dma_bitmode ? SONIC_DCR_DW : 0));
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+
+	SONIC_WRITE(SONIC_DCR, SONIC_DCR_EXBUS | SONIC_DCR_BMS |
+	                       SONIC_DCR_RFT1  | SONIC_DCR_TFT0 |
+	                       (lp->dma_bitmode ? SONIC_DCR_DW : 0));
 
 	/* This *must* be written back to in order to restore the
-           extended programmable output bits */
-	sonic_write(dev, SONIC_DCR2, 0);
+	 * extended programmable output bits, as it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
 
 	/* Clear *and* disable interrupts to be on the safe side */
-	sonic_write(dev, SONIC_ISR,0x7fff);
-	sonic_write(dev, SONIC_IMR,0);
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
 
 	/* Now look for the MAC address. */
 	if (mac_onboard_sonic_ethernet_addr(dev) != 0)
 		return -ENODEV;
 
-	printk(KERN_INFO "MAC ");
-	for (i = 0; i < 6; i++) {
-		printk("%2.2x", dev->dev_addr[i]);
-		if (i < 5)
-			printk(":");
-	}
-
-	printk(" IRQ %d\n", dev->irq);
-
 	/* Shared init code */
 	return macsonic_init(dev);
 }
@@ -468,8 +379,10 @@ int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev,
 	int i;
 	for(i = 0; i < 6; i++)
 		dev->dev_addr[i] = SONIC_READ_PROM(i);
-	/* For now we are going to assume that they're all bit-reversed */
-	bit_reverse_addr(dev->dev_addr);
+
+	/* Some of the addresses are bit-reversed */
+	if (id != MACSONIC_DAYNA)
+		bit_reverse_addr(dev->dev_addr);
 
 	return 0;
 }
@@ -487,6 +400,15 @@ int __init macsonic_ident(struct nubus_dev* ndev)
 		else
 			return MACSONIC_APPLE;
 	}
+	
+	if (ndev->dr_hw == NUBUS_DRHW_SMC9194 &&
+	    ndev->dr_sw == NUBUS_DRSW_DAYNA)
+		return MACSONIC_DAYNA;
+	
+	if (ndev->dr_hw == NUBUS_DRHW_SONIC_LC &&
+	    ndev->dr_sw == 0) { /* huh? */
+		return MACSONIC_APPLE16;
+	}
 	return -1;
 }
 
@@ -494,12 +416,12 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
 {
 	static int slots;
 	struct nubus_dev* ndev = NULL;
+	struct sonic_local* lp = netdev_priv(dev);
 	unsigned long base_addr, prom_addr;
 	u16 sonic_dcr;
-	int id;
-	int i;
-	int dma_bitmode;
-
+	int id = -1;
+	int reg_offset, dma_bitmode;
+	
 	/* Find the first SONIC that hasn't been initialized already */
 	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
 				       NUBUS_TYPE_ETHERNET, ndev)) != NULL)
@@ -521,51 +443,52 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
 	case MACSONIC_DUODOCK:
 		base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
 		prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
-		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1
-			| SONIC_DCR_TFT0;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1 |
+		            SONIC_DCR_TFT0;
 		reg_offset = 2;
-		dma_bitmode = 1;
+		dma_bitmode = SONIC_BITMODE32;
 		break;
 	case MACSONIC_APPLE:
 		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
 		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
 		sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
 		reg_offset = 0;
-		dma_bitmode = 1;
+		dma_bitmode = SONIC_BITMODE32;
 		break;
 	case MACSONIC_APPLE16:
 		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
 		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
-		sonic_dcr = SONIC_DCR_EXBUS
- 			| SONIC_DCR_RFT1 | SONIC_DCR_TFT0
-			| SONIC_DCR_PO1 | SONIC_DCR_BMS; 
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS; 
 		reg_offset = 0;
-		dma_bitmode = 0;
+		dma_bitmode = SONIC_BITMODE16;
 		break;
 	case MACSONIC_DAYNALINK:
 		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
 		prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
-		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0
-			| SONIC_DCR_PO1 | SONIC_DCR_BMS; 
+		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0 |
+		            SONIC_DCR_PO1 | SONIC_DCR_BMS; 
 		reg_offset = 0;
-		dma_bitmode = 0;
+		dma_bitmode = SONIC_BITMODE16;
 		break;
 	case MACSONIC_DAYNA:
 		base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
 		prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
-		sonic_dcr = SONIC_DCR_BMS
-			| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+		sonic_dcr = SONIC_DCR_BMS |
+		            SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
 		reg_offset = 0;
-		dma_bitmode = 0;
+		dma_bitmode = SONIC_BITMODE16;
 		break;
 	default:
 		printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
 		return -ENODEV;
 	}
 
-	/* Danger!  My arms are flailing wildly!  You *must* set this
-           before using sonic_read() */
+	/* Danger!  My arms are flailing wildly!  You *must* set lp->reg_offset
+	 * and dev->base_addr before using SONIC_READ() or SONIC_WRITE() */
 	dev->base_addr = base_addr;
+	lp->reg_offset = reg_offset;
+	lp->dma_bitmode = dma_bitmode;
 	dev->irq = SLOT2IRQ(ndev->board->slot);
 
 	if (!sonic_version_printed) {
@@ -573,29 +496,66 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
 		sonic_version_printed = 1;
 	}
 	printk(KERN_INFO "%s: %s in slot %X\n",
-	       dev->name, ndev->board->name, ndev->board->slot);
+	       lp->device->bus_id, ndev->board->name, ndev->board->slot);
 	printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
-	       dev->name, sonic_read(dev, SONIC_SR), dma_bitmode?32:16, reg_offset);
+	       lp->device->bus_id, SONIC_READ(SONIC_SR), dma_bitmode?32:16, reg_offset);
 
-	if(reg_offset) {
-		printk("%s: register offset unsupported.  please fix this if you know what it is.\n", dev->name);
-		return -ENODEV;
-	}
+#if 0 /* This is sometimes useful to find out how MacOS configured the card. */
+	printk(KERN_INFO "%s: DCR: 0x%04x, DCR2: 0x%04x\n", lp->device->bus_id,
+	       SONIC_READ(SONIC_DCR) & 0xffff, SONIC_READ(SONIC_DCR2) & 0xffff);
+#endif
 
 	/* Software reset, then initialize control registers. */
-	sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
-	sonic_write(dev, SONIC_DCR, sonic_dcr
-		    | (dma_bitmode ? SONIC_DCR_DW : 0));
+	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
+	SONIC_WRITE(SONIC_DCR, sonic_dcr | (dma_bitmode ? SONIC_DCR_DW : 0));
+	/* This *must* be written back to in order to restore the
+	 * extended programmable output bits, since it may not have been
+	 * initialised since the hardware reset. */
+	SONIC_WRITE(SONIC_DCR2, 0);
 
 	/* Clear *and* disable interrupts to be on the safe side */
-	sonic_write(dev, SONIC_ISR,0x7fff);
-	sonic_write(dev, SONIC_IMR,0);
+	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
 
 	/* Now look for the MAC address. */
 	if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
 		return -ENODEV;
 
-	printk(KERN_INFO "MAC ");
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+static int __init mac_sonic_probe(struct device *device)
+{
+	struct net_device *dev;
+	struct sonic_local *lp;
+	int err;
+	int i;
+
+	dev = alloc_etherdev(sizeof(struct sonic_local));
+	if (!dev)
+		return -ENOMEM;
+
+	lp = netdev_priv(dev);
+	lp->device = device;
+	SET_NETDEV_DEV(dev, device);
+ 	SET_MODULE_OWNER(dev);
+
+	/* This will catch fatal stuff like -ENOMEM as well as success */
+	err = mac_onboard_sonic_probe(dev);
+	if (err == 0)
+		goto found;
+	if (err != -ENODEV)
+		goto out;
+	err = mac_nubus_sonic_probe(dev);
+	if (err)
+		goto out;
+found:
+	err = register_netdev(dev);
+	if (err)
+		goto out;
+
+	printk("%s: MAC ", dev->name);
 	for (i = 0; i < 6; i++) {
 		printk("%2.2x", dev->dev_addr[i]);
 		if (i < 5)
@@ -603,55 +563,95 @@ int __init mac_nubus_sonic_probe(struct net_device* dev)
 	}
 	printk(" IRQ %d\n", dev->irq);
 
-	/* Shared init code */
-	return macsonic_init(dev);
-}
+	return 0;
 
-#ifdef MODULE
-static struct net_device *dev_macsonic;
+out:
+	free_netdev(dev);
 
-MODULE_PARM(sonic_debug, "i");
+	return err;
+}
+
+MODULE_DESCRIPTION("Macintosh SONIC ethernet driver");
+module_param(sonic_debug, int, 0);
 MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
 
-int
-init_module(void)
+#define SONIC_IRQ_FLAG IRQ_FLG_FAST
+
+#include "sonic.c"
+
+static int __devexit mac_sonic_device_remove (struct device *device)
 {
-        dev_macsonic = macsonic_probe(-1);
-	if (IS_ERR(dev_macsonic)) {
-                printk(KERN_WARNING "macsonic.c: No card found\n");
-		return PTR_ERR(dev_macsonic);
-	}
+	struct net_device *dev = device->driver_data;
+	struct sonic_local* lp = netdev_priv(dev);
+
+	unregister_netdev (dev);
+	dma_free_coherent(lp->device, SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode),
+	                  lp->descriptors, lp->descriptors_laddr);
+	free_netdev (dev);
+
 	return 0;
 }
 
-void
-cleanup_module(void)
+static struct device_driver mac_sonic_driver = {
+	.name   = mac_sonic_string,
+	.bus    = &platform_bus_type,
+	.probe  = mac_sonic_probe,
+	.remove = __devexit_p(mac_sonic_device_remove),
+};
+
+static void mac_sonic_platform_release(struct device *device)
 {
-	unregister_netdev(dev_macsonic);
-	kfree(dev_macsonic->priv);
-	free_netdev(dev_macsonic);
+	struct platform_device *pldev;
+
+	/* free device */
+	pldev = to_platform_device (device);
+	kfree (pldev);
 }
-#endif /* MODULE */
 
+static int __init mac_sonic_init_module(void)
+{
+	struct platform_device *pldev;
+	int err;
 
-#define vdma_alloc(foo, bar) ((u32)foo)
-#define vdma_free(baz)
-#define sonic_chiptomem(bat) (bat)
-#define PHYSADDR(quux) (quux)
-#define CPHYSADDR(quux) (quux)
+	if ((err = driver_register(&mac_sonic_driver))) {
+		printk(KERN_ERR "Driver registration failed\n");
+		return err;
+	}
 
-#define sonic_request_irq       request_irq
-#define sonic_free_irq          free_irq
+	mac_sonic_device = NULL;
 
-#include "sonic.c"
+	if (!(pldev = kmalloc (sizeof (*pldev), GFP_KERNEL))) {
+		goto out_unregister;
+	}
 
-/*
- * Local variables:
- *  compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h   -c -o macsonic.o macsonic.c"
- *  version-control: t
- *  kept-new-versions: 5
- *  c-indent-level: 8
- *  tab-width: 8
- * End:
- *
- */
+	memset(pldev, 0, sizeof (*pldev));
+	pldev->name		= mac_sonic_string;
+	pldev->id		= 0;
+	pldev->dev.release	= mac_sonic_platform_release;
+	mac_sonic_device	= pldev;
+
+	if (platform_device_register (pldev)) {
+		kfree(pldev);
+		mac_sonic_device = NULL;
+	}
+
+	return 0;
+
+out_unregister:
+	platform_device_unregister(pldev);
+
+	return -ENOMEM;
+}
+
+static void __exit mac_sonic_cleanup_module(void)
+{
+	driver_unregister(&mac_sonic_driver);
+
+	if (mac_sonic_device) {
+		platform_device_unregister(mac_sonic_device);
+		mac_sonic_device = NULL;
+	}
+}
+
+module_init(mac_sonic_init_module);
+module_exit(mac_sonic_cleanup_module);
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index 0405e1f0d3d..fb6b232069d 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -1157,16 +1157,20 @@ static int mv643xx_eth_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	if (!skb_shinfo(skb)->nr_frags) {
 linear:
 		if (skb->ip_summed != CHECKSUM_HW) {
+			/* Errata BTS #50, IHL must be 5 if no HW checksum */
 			pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
-					ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC;
+					   ETH_TX_FIRST_DESC |
+					   ETH_TX_LAST_DESC |
+					   5 << ETH_TX_IHL_SHIFT;
 			pkt_info.l4i_chk = 0;
 		} else {
-			u32 ipheader = skb->nh.iph->ihl << 11;
 
 			pkt_info.cmd_sts = ETH_TX_ENABLE_INTERRUPT |
-					ETH_TX_FIRST_DESC | ETH_TX_LAST_DESC |
-					ETH_GEN_TCP_UDP_CHECKSUM |
-					ETH_GEN_IP_V_4_CHECKSUM | ipheader;
+					   ETH_TX_FIRST_DESC |
+					   ETH_TX_LAST_DESC |
+					   ETH_GEN_TCP_UDP_CHECKSUM |
+					   ETH_GEN_IP_V_4_CHECKSUM |
+					   skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
 			/* CPU already calculated pseudo header checksum. */
 			if (skb->nh.iph->protocol == IPPROTO_UDP) {
 				pkt_info.cmd_sts |= ETH_UDP_FRAME;
@@ -1193,7 +1197,6 @@ linear:
 		stats->tx_bytes += pkt_info.byte_cnt;
 	} else {
 		unsigned int frag;
-		u32 ipheader;
 
 		/* Since hardware can't handle unaligned fragments smaller
 		 * than 9 bytes, if we find any, we linearize the skb
@@ -1222,12 +1225,16 @@ linear:
 							DMA_TO_DEVICE);
 		pkt_info.l4i_chk = 0;
 		pkt_info.return_info = 0;
-		pkt_info.cmd_sts = ETH_TX_FIRST_DESC;
 
-		if (skb->ip_summed == CHECKSUM_HW) {
-			ipheader = skb->nh.iph->ihl << 11;
-			pkt_info.cmd_sts |= ETH_GEN_TCP_UDP_CHECKSUM |
-					ETH_GEN_IP_V_4_CHECKSUM | ipheader;
+		if (skb->ip_summed != CHECKSUM_HW)
+			/* Errata BTS #50, IHL must be 5 if no HW checksum */
+			pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
+					   5 << ETH_TX_IHL_SHIFT;
+		else {
+			pkt_info.cmd_sts = ETH_TX_FIRST_DESC |
+					   ETH_GEN_TCP_UDP_CHECKSUM |
+					   ETH_GEN_IP_V_4_CHECKSUM |
+					   skb->nh.iph->ihl << ETH_TX_IHL_SHIFT;
 			/* CPU already calculated pseudo header checksum. */
 			if (skb->nh.iph->protocol == IPPROTO_UDP) {
 				pkt_info.cmd_sts |= ETH_UDP_FRAME;
diff --git a/drivers/net/mv643xx_eth.h b/drivers/net/mv643xx_eth.h
index 57c4f8fbfdb..7678b59c295 100644
--- a/drivers/net/mv643xx_eth.h
+++ b/drivers/net/mv643xx_eth.h
@@ -49,7 +49,7 @@
 /* Checksum offload for Tx works for most packets, but
  * fails if previous packet sent did not use hw csum
  */
-#undef	MV643XX_CHECKSUM_OFFLOAD_TX
+#define	MV643XX_CHECKSUM_OFFLOAD_TX
 #define	MV643XX_NAPI
 #define	MV643XX_TX_FAST_REFILL
 #undef	MV643XX_RX_QUEUE_FILL_ON_TASK	/* Does not work, yet */
@@ -217,6 +217,8 @@
 #define ETH_TX_ENABLE_INTERRUPT			(BIT23)
 #define ETH_AUTO_MODE				(BIT30)
 
+#define ETH_TX_IHL_SHIFT			11
+
 /* typedefs */
 
 typedef enum _eth_func_ret_status {
diff --git a/drivers/net/pci-skeleton.c b/drivers/net/pci-skeleton.c
index 4a391ea0f58..a1ac4bd1696 100644
--- a/drivers/net/pci-skeleton.c
+++ b/drivers/net/pci-skeleton.c
@@ -486,9 +486,9 @@ struct netdrv_private {
 MODULE_AUTHOR ("Jeff Garzik <jgarzik@pobox.com>");
 MODULE_DESCRIPTION ("Skeleton for a PCI Fast Ethernet driver");
 MODULE_LICENSE("GPL");
-MODULE_PARM (multicast_filter_limit, "i");
-MODULE_PARM (max_interrupt_work, "i");
-MODULE_PARM (media, "1-" __MODULE_STRING(8) "i");
+module_param(multicast_filter_limit, int, 0);
+module_param(max_interrupt_work, int, 0);
+module_param_array(media, int, NULL, 0);
 MODULE_PARM_DESC (multicast_filter_limit, "pci-skeleton maximum number of filtered multicast addresses");
 MODULE_PARM_DESC (max_interrupt_work, "pci-skeleton maximum events handled per interrupt");
 MODULE_PARM_DESC (media, "pci-skeleton: Bits 0-3: media type, bit 17: full duplex");
diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c
index 9d8197bb293..384a736a0d2 100644
--- a/drivers/net/pcmcia/fmvj18x_cs.c
+++ b/drivers/net/pcmcia/fmvj18x_cs.c
@@ -134,7 +134,7 @@ typedef struct local_info_t {
     u_char mc_filter[8];
 } local_info_t;
 
-#define MC_FILTERBREAK 64
+#define MC_FILTERBREAK 8
 
 /*====================================================================*/
 /* 
@@ -1012,7 +1012,7 @@ static void fjn_reset(struct net_device *dev)
 	outb(BANK_1U, ioaddr + CONFIG_1);
 
     /* set the multicast table to accept none. */
-    for (i = 0; i < 6; i++) 
+    for (i = 0; i < 8; i++) 
         outb(0x00, ioaddr + MAR_ADR + i);
 
     /* Switch to bank 2 (runtime mode) */
@@ -1269,6 +1269,16 @@ static void set_rx_mode(struct net_device *dev)
     u_long flags;
     int i;
     
+    int saved_config_0 = inb(ioaddr + CONFIG_0);
+     
+    local_irq_save(flags); 
+
+    /* Disable Tx and Rx */
+    if (sram_config == 0) 
+	outb(CONFIG0_RST, ioaddr + CONFIG_0);
+    else
+	outb(CONFIG0_RST_1, ioaddr + CONFIG_0);
+
     if (dev->flags & IFF_PROMISC) {
 	/* Unconditionally log net taps. */
 	printk("%s: Promiscuous mode enabled.\n", dev->name);
@@ -1290,20 +1300,23 @@ static void set_rx_mode(struct net_device *dev)
 	for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
 	     i++, mclist = mclist->next) {
 	    unsigned int bit =
-	    	ether_crc_le(ETH_ALEN, mclist->dmi_addr) & 0x3f;
-	    mc_filter[bit >> 3] |= (1 << bit);
+	    	ether_crc_le(ETH_ALEN, mclist->dmi_addr) >> 26;
+	    mc_filter[bit >> 3] |= (1 << (bit & 7));
 	}
+	outb(2, ioaddr + RX_MODE);	/* Use normal mode. */
     }
 
-    local_irq_save(flags); 
     if (memcmp(mc_filter, lp->mc_filter, sizeof(mc_filter))) {
 	int saved_bank = inb(ioaddr + CONFIG_1);
 	/* Switch to bank 1 and set the multicast table. */
 	outb(0xe4, ioaddr + CONFIG_1);
 	for (i = 0; i < 8; i++)
-	    outb(mc_filter[i], ioaddr + 8 + i);
+	    outb(mc_filter[i], ioaddr + MAR_ADR + i);
 	memcpy(lp->mc_filter, mc_filter, sizeof(mc_filter));
 	outb(saved_bank, ioaddr + CONFIG_1);
     }
+
+    outb(saved_config_0, ioaddr + CONFIG_0);
+
     local_irq_restore(flags);
 }
diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig
new file mode 100644
index 00000000000..6a2fe358347
--- /dev/null
+++ b/drivers/net/phy/Kconfig
@@ -0,0 +1,57 @@
+#
+# PHY Layer Configuration
+#
+
+menu "PHY device support"
+
+config PHYLIB
+	tristate "PHY Device support and infrastructure"
+	depends on NET_ETHERNET
+	help
+	  Ethernet controllers are usually attached to PHY
+	  devices.  This option provides infrastructure for
+	  managing PHY devices.
+
+config PHYCONTROL
+	bool "  Support for automatically handling PHY state changes"
+	depends on PHYLIB
+	help
+	  Adds code to perform all the work for keeping PHY link
+	  state (speed/duplex/etc) up-to-date.  Also handles
+	  interrupts.
+
+comment "MII PHY device drivers"
+	depends on PHYLIB
+
+config MARVELL_PHY
+	tristate "Drivers for Marvell PHYs"
+	depends on PHYLIB
+	---help---
+	  Currently has a driver for the 88E1011S
+	
+config DAVICOM_PHY
+	tristate "Drivers for Davicom PHYs"
+	depends on PHYLIB
+	---help---
+	  Currently supports dm9161e and dm9131
+
+config QSEMI_PHY
+	tristate "Drivers for Quality Semiconductor PHYs"
+	depends on PHYLIB
+	---help---
+	  Currently supports the qs6612
+
+config LXT_PHY
+	tristate "Drivers for the Intel LXT PHYs"
+	depends on PHYLIB
+	---help---
+	  Currently supports the lxt970, lxt971
+
+config CICADA_PHY
+	tristate "Drivers for the Cicada PHYs"
+	depends on PHYLIB
+	---help---
+	  Currently supports the cis8204
+
+endmenu
+
diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile
new file mode 100644
index 00000000000..e4116a5fbb4
--- /dev/null
+++ b/drivers/net/phy/Makefile
@@ -0,0 +1,10 @@
+# Makefile for Linux PHY drivers
+
+libphy-objs			:= phy.o phy_device.o mdio_bus.o
+
+obj-$(CONFIG_PHYLIB)		+= libphy.o
+obj-$(CONFIG_MARVELL_PHY)	+= marvell.o
+obj-$(CONFIG_DAVICOM_PHY)	+= davicom.o
+obj-$(CONFIG_CICADA_PHY)	+= cicada.o
+obj-$(CONFIG_LXT_PHY)		+= lxt.o
+obj-$(CONFIG_QSEMI_PHY)		+= qsemi.o
diff --git a/drivers/net/phy/cicada.c b/drivers/net/phy/cicada.c
new file mode 100644
index 00000000000..c47fb2ecd14
--- /dev/null
+++ b/drivers/net/phy/cicada.c
@@ -0,0 +1,134 @@
+/*
+ * drivers/net/phy/cicada.c
+ *
+ * Driver for Cicada PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* Cicada Extended Control Register 1 */
+#define MII_CIS8201_EXT_CON1           0x17
+#define MII_CIS8201_EXTCON1_INIT       0x0000
+
+/* Cicada Interrupt Mask Register */
+#define MII_CIS8201_IMASK		0x19
+#define MII_CIS8201_IMASK_IEN		0x8000
+#define MII_CIS8201_IMASK_SPEED	0x4000
+#define MII_CIS8201_IMASK_LINK		0x2000
+#define MII_CIS8201_IMASK_DUPLEX	0x1000
+#define MII_CIS8201_IMASK_MASK		0xf000
+
+/* Cicada Interrupt Status Register */
+#define MII_CIS8201_ISTAT		0x1a
+#define MII_CIS8201_ISTAT_STATUS	0x8000
+#define MII_CIS8201_ISTAT_SPEED	0x4000
+#define MII_CIS8201_ISTAT_LINK		0x2000
+#define MII_CIS8201_ISTAT_DUPLEX	0x1000
+
+/* Cicada Auxiliary Control/Status Register */
+#define MII_CIS8201_AUX_CONSTAT        0x1c
+#define MII_CIS8201_AUXCONSTAT_INIT    0x0004
+#define MII_CIS8201_AUXCONSTAT_DUPLEX  0x0020
+#define MII_CIS8201_AUXCONSTAT_SPEED   0x0018
+#define MII_CIS8201_AUXCONSTAT_GBIT    0x0010
+#define MII_CIS8201_AUXCONSTAT_100     0x0008
+
+MODULE_DESCRIPTION("Cicadia PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int cis820x_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_write(phydev, MII_CIS8201_AUX_CONSTAT,
+			MII_CIS8201_AUXCONSTAT_INIT);
+
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, MII_CIS8201_EXT_CON1,
+			MII_CIS8201_EXTCON1_INIT);
+
+	return err;
+}
+
+static int cis820x_ack_interrupt(struct phy_device *phydev)
+{
+	int err = phy_read(phydev, MII_CIS8201_ISTAT);
+
+	return (err < 0) ? err : 0;
+}
+
+static int cis820x_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_CIS8201_IMASK, 
+				MII_CIS8201_IMASK_MASK);
+	else
+		err = phy_write(phydev, MII_CIS8201_IMASK, 0);
+
+	return err;
+}
+
+/* Cicada 820x */
+static struct phy_driver cis8204_driver = {
+	.phy_id		= 0x000fc440,
+	.name		= "Cicada Cis8204",
+	.phy_id_mask	= 0x000fffc0,
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= &cis820x_config_init,
+	.config_aneg	= &genphy_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &cis820x_ack_interrupt,
+	.config_intr	= &cis820x_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init cis8204_init(void)
+{
+	return phy_driver_register(&cis8204_driver);
+}
+
+static void __exit cis8204_exit(void)
+{
+	phy_driver_unregister(&cis8204_driver);
+}
+
+module_init(cis8204_init);
+module_exit(cis8204_exit);
diff --git a/drivers/net/phy/davicom.c b/drivers/net/phy/davicom.c
new file mode 100644
index 00000000000..6caf499fae3
--- /dev/null
+++ b/drivers/net/phy/davicom.c
@@ -0,0 +1,195 @@
+/*
+ * drivers/net/phy/davicom.c
+ *
+ * Driver for Davicom PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_DM9161_SCR		0x10
+#define MII_DM9161_SCR_INIT	0x0610
+
+/* DM9161 Interrupt Register */
+#define MII_DM9161_INTR	0x15
+#define MII_DM9161_INTR_PEND		0x8000
+#define MII_DM9161_INTR_DPLX_MASK	0x0800
+#define MII_DM9161_INTR_SPD_MASK	0x0400
+#define MII_DM9161_INTR_LINK_MASK	0x0200
+#define MII_DM9161_INTR_MASK		0x0100
+#define MII_DM9161_INTR_DPLX_CHANGE	0x0010
+#define MII_DM9161_INTR_SPD_CHANGE	0x0008
+#define MII_DM9161_INTR_LINK_CHANGE	0x0004
+#define MII_DM9161_INTR_INIT 		0x0000
+#define MII_DM9161_INTR_STOP	\
+(MII_DM9161_INTR_DPLX_MASK | MII_DM9161_INTR_SPD_MASK \
+ | MII_DM9161_INTR_LINK_MASK | MII_DM9161_INTR_MASK)
+
+/* DM9161 10BT Configuration/Status */
+#define MII_DM9161_10BTCSR	0x12
+#define MII_DM9161_10BTCSR_INIT	0x7800
+
+MODULE_DESCRIPTION("Davicom PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+
+#define DM9161_DELAY 1
+static int dm9161_config_intr(struct phy_device *phydev)
+{
+	int temp;
+
+	temp = phy_read(phydev, MII_DM9161_INTR);
+
+	if (temp < 0)
+		return temp;
+
+	if(PHY_INTERRUPT_ENABLED == phydev->interrupts )
+		temp &= ~(MII_DM9161_INTR_STOP);
+	else
+		temp |= MII_DM9161_INTR_STOP;
+
+	temp = phy_write(phydev, MII_DM9161_INTR, temp);
+
+	return temp;
+}
+
+static int dm9161_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* Isolate the PHY */
+	err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+	if (err < 0)
+		return err;
+
+	/* Configure the new settings */
+	err = genphy_config_aneg(phydev);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int dm9161_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	/* Isolate the PHY */
+	err = phy_write(phydev, MII_BMCR, BMCR_ISOLATE);
+
+	if (err < 0)
+		return err;
+
+	/* Do not bypass the scrambler/descrambler */
+	err = phy_write(phydev, MII_DM9161_SCR, MII_DM9161_SCR_INIT);
+
+	if (err < 0)
+		return err;
+
+	/* Clear 10BTCSR to default */
+	err = phy_write(phydev, MII_DM9161_10BTCSR, MII_DM9161_10BTCSR_INIT);
+
+	if (err < 0)
+		return err;
+
+	/* Reconnect the PHY, and enable Autonegotiation */
+	err = phy_write(phydev, MII_BMCR, BMCR_ANENABLE);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int dm9161_ack_interrupt(struct phy_device *phydev)
+{
+	int err = phy_read(phydev, MII_DM9161_INTR);
+
+	return (err < 0) ? err : 0;
+}
+
+static struct phy_driver dm9161_driver = {
+	.phy_id		= 0x0181b880,
+	.name		= "Davicom DM9161E",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.config_init	= dm9161_config_init,
+	.config_aneg	= dm9161_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver dm9131_driver = {
+	.phy_id		= 0x00181b80,
+	.name		= "Davicom DM9131",
+	.phy_id_mask	= 0x0ffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= dm9161_ack_interrupt,
+	.config_intr	= dm9161_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init davicom_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&dm9161_driver);
+	if (ret)
+		goto err1;
+
+	ret = phy_driver_register(&dm9131_driver);
+	if (ret)
+		goto err2;
+	return 0;
+
+ err2:	
+	phy_driver_unregister(&dm9161_driver);
+ err1:
+	return ret;
+}
+
+static void __exit davicom_exit(void)
+{
+	phy_driver_unregister(&dm9161_driver);
+	phy_driver_unregister(&dm9131_driver);
+}
+
+module_init(davicom_init);
+module_exit(davicom_exit);
diff --git a/drivers/net/phy/lxt.c b/drivers/net/phy/lxt.c
new file mode 100644
index 00000000000..4c840448ec8
--- /dev/null
+++ b/drivers/net/phy/lxt.c
@@ -0,0 +1,179 @@
+/*
+ * drivers/net/phy/lxt.c
+ *
+ * Driver for Intel LXT PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* The Level one LXT970 is used by many boards				     */
+
+#define MII_LXT970_IER       17  /* Interrupt Enable Register */
+
+#define MII_LXT970_IER_IEN	0x0002
+
+#define MII_LXT970_ISR       18  /* Interrupt Status Register */
+
+#define MII_LXT970_CONFIG    19  /* Configuration Register    */
+
+/* ------------------------------------------------------------------------- */
+/* The Level one LXT971 is used on some of my custom boards                  */
+
+/* register definitions for the 971 */
+#define MII_LXT971_IER		18  /* Interrupt Enable Register */
+#define MII_LXT971_IER_IEN	0x00f2
+
+#define MII_LXT971_ISR		19  /* Interrupt Status Register */
+
+
+MODULE_DESCRIPTION("Intel LXT PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int lxt970_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, MII_BMSR);
+
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_LXT970_ISR);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int lxt970_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_LXT970_IER, MII_LXT970_IER_IEN);
+	else
+		err = phy_write(phydev, MII_LXT970_IER, 0);
+
+	return err;
+}
+
+static int lxt970_config_init(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_write(phydev, MII_LXT970_CONFIG, 0);
+
+	return err;
+}
+
+
+static int lxt971_ack_interrupt(struct phy_device *phydev)
+{
+	int err = phy_read(phydev, MII_LXT971_ISR);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int lxt971_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_LXT971_IER, MII_LXT971_IER_IEN);
+	else
+		err = phy_write(phydev, MII_LXT971_IER, 0);
+
+	return err;
+}
+
+static struct phy_driver lxt970_driver = {
+	.phy_id		= 0x07810000,
+	.name		= "LXT970",
+	.phy_id_mask	= 0x0fffffff,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= lxt970_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= lxt970_ack_interrupt,
+	.config_intr	= lxt970_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static struct phy_driver lxt971_driver = {
+	.phy_id		= 0x0001378e,
+	.name		= "LXT971",
+	.phy_id_mask	= 0x0fffffff,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= lxt971_ack_interrupt,
+	.config_intr	= lxt971_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init lxt_init(void)
+{
+	int ret;
+
+	ret = phy_driver_register(&lxt970_driver);
+	if (ret)
+		goto err1;
+
+	ret = phy_driver_register(&lxt971_driver);
+	if (ret)
+		goto err2;
+	return 0;
+
+ err2:	
+	phy_driver_unregister(&lxt970_driver);
+ err1:
+	return ret;
+}
+
+static void __exit lxt_exit(void)
+{
+	phy_driver_unregister(&lxt970_driver);
+	phy_driver_unregister(&lxt971_driver);
+}
+
+module_init(lxt_init);
+module_exit(lxt_exit);
diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c
new file mode 100644
index 00000000000..4a72b025006
--- /dev/null
+++ b/drivers/net/phy/marvell.c
@@ -0,0 +1,140 @@
+/*
+ * drivers/net/phy/marvell.c
+ *
+ * Driver for Marvell PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#define MII_M1011_IEVENT		0x13
+#define MII_M1011_IEVENT_CLEAR		0x0000
+
+#define MII_M1011_IMASK			0x12
+#define MII_M1011_IMASK_INIT		0x6400
+#define MII_M1011_IMASK_CLEAR		0x0000
+
+MODULE_DESCRIPTION("Marvell PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+static int marvell_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	/* Clear the interrupts by reading the reg */
+	err = phy_read(phydev, MII_M1011_IEVENT);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int marvell_config_intr(struct phy_device *phydev)
+{
+	int err;
+
+	if(phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_INIT);
+	else
+		err = phy_write(phydev, MII_M1011_IMASK, MII_M1011_IMASK_CLEAR);
+
+	return err;
+}
+
+static int marvell_config_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	/* The Marvell PHY has an errata which requires
+	 * that certain registers get written in order
+	 * to restart autonegotiation */
+	err = phy_write(phydev, MII_BMCR, BMCR_RESET);
+
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x1f);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x200c);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1d, 0x5);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0);
+	if (err < 0)
+		return err;
+
+	err = phy_write(phydev, 0x1e, 0x100);
+	if (err < 0)
+		return err;
+
+
+	err = genphy_config_aneg(phydev);
+
+	return err;
+}
+
+
+static struct phy_driver m88e1101_driver = {
+	.phy_id		= 0x01410c00,
+	.phy_id_mask	= 0xffffff00,
+	.name		= "Marvell 88E1101",
+	.features	= PHY_GBIT_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_aneg	= &marvell_config_aneg,
+	.read_status	= &genphy_read_status,
+	.ack_interrupt	= &marvell_ack_interrupt,
+	.config_intr	= &marvell_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init marvell_init(void)
+{
+	return phy_driver_register(&m88e1101_driver);
+}
+
+static void __exit marvell_exit(void)
+{
+	phy_driver_unregister(&m88e1101_driver);
+}
+
+module_init(marvell_init);
+module_exit(marvell_exit);
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
new file mode 100644
index 00000000000..41f62c0c5fc
--- /dev/null
+++ b/drivers/net/phy/mdio_bus.c
@@ -0,0 +1,176 @@
+/*
+ * drivers/net/phy/mdio_bus.c
+ *
+ * MDIO Bus interface
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* mdiobus_register 
+ *
+ * description: Called by a bus driver to bring up all the PHYs
+ *   on a given bus, and attach them to the bus
+ */
+int mdiobus_register(struct mii_bus *bus)
+{
+	int i;
+	int err = 0;
+
+	spin_lock_init(&bus->mdio_lock);
+
+	if (NULL == bus || NULL == bus->name ||
+			NULL == bus->read ||
+			NULL == bus->write)
+		return -EINVAL;
+
+	if (bus->reset)
+		bus->reset(bus);
+
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		struct phy_device *phydev;
+
+		phydev = get_phy_device(bus, i);
+
+		if (IS_ERR(phydev))
+			return PTR_ERR(phydev);
+
+		/* There's a PHY at this address
+		 * We need to set:
+		 * 1) IRQ
+		 * 2) bus_id
+		 * 3) parent
+		 * 4) bus
+		 * 5) mii_bus
+		 * And, we need to register it */
+		if (phydev) {
+			phydev->irq = bus->irq[i];
+
+			phydev->dev.parent = bus->dev;
+			phydev->dev.bus = &mdio_bus_type;
+			sprintf(phydev->dev.bus_id, "phy%d:%d", bus->id, i);
+
+			phydev->bus = bus;
+
+			err = device_register(&phydev->dev);
+
+			if (err)
+				printk(KERN_ERR "phy %d failed to register\n",
+						i);
+		}
+
+		bus->phy_map[i] = phydev;
+	}
+
+	pr_info("%s: probed\n", bus->name);
+
+	return err;
+}
+EXPORT_SYMBOL(mdiobus_register);
+
+void mdiobus_unregister(struct mii_bus *bus)
+{
+	int i;
+
+	for (i = 0; i < PHY_MAX_ADDR; i++) {
+		if (bus->phy_map[i]) {
+			device_unregister(&bus->phy_map[i]->dev);
+			kfree(bus->phy_map[i]);
+		}
+	}
+}
+EXPORT_SYMBOL(mdiobus_unregister);
+
+/* mdio_bus_match
+ *
+ * description: Given a PHY device, and a PHY driver, return 1 if
+ *   the driver supports the device.  Otherwise, return 0
+ */
+static int mdio_bus_match(struct device *dev, struct device_driver *drv)
+{
+	struct phy_device *phydev = to_phy_device(dev);
+	struct phy_driver *phydrv = to_phy_driver(drv);
+
+	return (phydrv->phy_id == (phydev->phy_id & phydrv->phy_id_mask));
+}
+
+/* Suspend and resume.  Copied from platform_suspend and
+ * platform_resume
+ */
+static int mdio_bus_suspend(struct device * dev, u32 state)
+{
+	int ret = 0;
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->suspend) {
+		ret = drv->suspend(dev, state, SUSPEND_DISABLE);
+		if (ret == 0)
+			ret = drv->suspend(dev, state, SUSPEND_SAVE_STATE);
+		if (ret == 0)
+			ret = drv->suspend(dev, state, SUSPEND_POWER_DOWN);
+	}
+	return ret;
+}
+
+static int mdio_bus_resume(struct device * dev)
+{
+	int ret = 0;
+	struct device_driver *drv = dev->driver;
+
+	if (drv && drv->resume) {
+		ret = drv->resume(dev, RESUME_POWER_ON);
+		if (ret == 0)
+			ret = drv->resume(dev, RESUME_RESTORE_STATE);
+		if (ret == 0)
+			ret = drv->resume(dev, RESUME_ENABLE);
+	}
+	return ret;
+}
+
+struct bus_type mdio_bus_type = {
+	.name		= "mdio_bus",
+	.match		= mdio_bus_match,
+	.suspend	= mdio_bus_suspend,
+	.resume		= mdio_bus_resume,
+};
+
+int __init mdio_bus_init(void)
+{
+	return bus_register(&mdio_bus_type);
+}
+
+void __exit mdio_bus_exit(void)
+{
+	bus_unregister(&mdio_bus_type);
+}
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
new file mode 100644
index 00000000000..d9e11f93bf3
--- /dev/null
+++ b/drivers/net/phy/phy.c
@@ -0,0 +1,871 @@
+/*
+ * drivers/net/phy/phy.c
+ *
+ * Framework for configuring and reading PHY devices
+ * Based on code in sungem_phy.c and gianfar_phy.c
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* Convenience function to print out the current phy status
+ */
+void phy_print_status(struct phy_device *phydev)
+{
+	pr_info("%s: Link is %s", phydev->dev.bus_id,
+			phydev->link ? "Up" : "Down");
+	if (phydev->link)
+		printk(" - %d/%s", phydev->speed,
+				DUPLEX_FULL == phydev->duplex ?
+				"Full" : "Half");
+
+	printk("\n");
+}
+EXPORT_SYMBOL(phy_print_status);
+
+
+/* Convenience functions for reading/writing a given PHY
+ * register. They MUST NOT be called from interrupt context,
+ * because the bus read/write functions may wait for an interrupt
+ * to conclude the operation. */
+int phy_read(struct phy_device *phydev, u16 regnum)
+{
+	int retval;
+	struct mii_bus *bus = phydev->bus;
+
+	spin_lock_bh(&bus->mdio_lock);
+	retval = bus->read(bus, phydev->addr, regnum);
+	spin_unlock_bh(&bus->mdio_lock);
+
+	return retval;
+}
+EXPORT_SYMBOL(phy_read);
+
+int phy_write(struct phy_device *phydev, u16 regnum, u16 val)
+{
+	int err;
+	struct mii_bus *bus = phydev->bus;
+
+	spin_lock_bh(&bus->mdio_lock);
+	err = bus->write(bus, phydev->addr, regnum, val);
+	spin_unlock_bh(&bus->mdio_lock);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_write);
+
+
+int phy_clear_interrupt(struct phy_device *phydev)
+{
+	int err = 0;
+
+	if (phydev->drv->ack_interrupt)
+		err = phydev->drv->ack_interrupt(phydev);
+
+	return err;
+}
+
+
+int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
+{
+	int err = 0;
+
+	phydev->interrupts = interrupts;
+	if (phydev->drv->config_intr)
+		err = phydev->drv->config_intr(phydev);
+
+	return err;
+}
+
+
+/* phy_aneg_done
+ *
+ * description: Reads the status register and returns 0 either if
+ *   auto-negotiation is incomplete, or if there was an error.
+ *   Returns BMSR_ANEGCOMPLETE if auto-negotiation is done.
+ */
+static inline int phy_aneg_done(struct phy_device *phydev)
+{
+	int retval;
+
+	retval = phy_read(phydev, MII_BMSR);
+
+	return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
+}
+
+/* A structure for mapping a particular speed and duplex
+ * combination to a particular SUPPORTED and ADVERTISED value */
+struct phy_setting {
+	int speed;
+	int duplex;
+	u32 setting;
+};
+
+/* A mapping of all SUPPORTED settings to speed/duplex */
+static struct phy_setting settings[] = {
+	{
+		.speed = 10000,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_10000baseT_Full,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_1000baseT_Full,
+	},
+	{
+		.speed = SPEED_1000,
+		.duplex = DUPLEX_HALF,
+		.setting = SUPPORTED_1000baseT_Half,
+	},
+	{
+		.speed = SPEED_100,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_100baseT_Full,
+	},
+	{
+		.speed = SPEED_100,
+		.duplex = DUPLEX_HALF,
+		.setting = SUPPORTED_100baseT_Half,
+	},
+	{
+		.speed = SPEED_10,
+		.duplex = DUPLEX_FULL,
+		.setting = SUPPORTED_10baseT_Full,
+	},
+	{
+		.speed = SPEED_10,
+		.duplex = DUPLEX_HALF,
+		.setting = SUPPORTED_10baseT_Half,
+	},
+};
+
+#define MAX_NUM_SETTINGS (sizeof(settings)/sizeof(struct phy_setting))
+
+/* phy_find_setting
+ *
+ * description: Searches the settings array for the setting which
+ *   matches the desired speed and duplex, and returns the index
+ *   of that setting.  Returns the index of the last setting if
+ *   none of the others match.
+ */
+static inline int phy_find_setting(int speed, int duplex)
+{
+	int idx = 0;
+
+	while (idx < ARRAY_SIZE(settings) &&
+			(settings[idx].speed != speed ||
+			settings[idx].duplex != duplex))
+		idx++;
+
+	return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/* phy_find_valid
+ * idx: The first index in settings[] to search
+ * features: A mask of the valid settings
+ *
+ * description: Returns the index of the first valid setting less
+ *   than or equal to the one pointed to by idx, as determined by
+ *   the mask in features.  Returns the index of the last setting
+ *   if nothing else matches.
+ */
+static inline int phy_find_valid(int idx, u32 features)
+{
+	while (idx < MAX_NUM_SETTINGS && !(settings[idx].setting & features))
+		idx++;
+
+	return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
+}
+
+/* phy_sanitize_settings
+ *
+ * description: Make sure the PHY is set to supported speeds and
+ *   duplexes.  Drop down by one in this order:  1000/FULL,
+ *   1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF
+ */
+void phy_sanitize_settings(struct phy_device *phydev)
+{
+	u32 features = phydev->supported;
+	int idx;
+
+	/* Sanitize settings based on PHY capabilities */
+	if ((features & SUPPORTED_Autoneg) == 0)
+		phydev->autoneg = 0;
+
+	idx = phy_find_valid(phy_find_setting(phydev->speed, phydev->duplex),
+			features);
+
+	phydev->speed = settings[idx].speed;
+	phydev->duplex = settings[idx].duplex;
+}
+EXPORT_SYMBOL(phy_sanitize_settings);
+
+/* phy_ethtool_sset:
+ * A generic ethtool sset function.  Handles all the details
+ *
+ * A few notes about parameter checking:
+ * - We don't set port or transceiver, so we don't care what they
+ *   were set to.
+ * - phy_start_aneg() will make sure forced settings are sane, and
+ *   choose the next best ones from the ones selected, so we don't
+ *   care if ethtool tries to give us bad values
+ *
+ * A note about the PHYCONTROL Layer.  If you turn off
+ * CONFIG_PHYCONTROL, you will need to read the PHY status
+ * registers after this function completes, and update your
+ * controller manually.
+ */
+int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+	if (cmd->phy_address != phydev->addr)
+		return -EINVAL;
+
+	/* We make sure that we don't pass unsupported
+	 * values in to the PHY */
+	cmd->advertising &= phydev->supported;
+
+	/* Verify the settings we care about. */
+	if (cmd->autoneg != AUTONEG_ENABLE && cmd->autoneg != AUTONEG_DISABLE)
+		return -EINVAL;
+
+	if (cmd->autoneg == AUTONEG_ENABLE && cmd->advertising == 0)
+		return -EINVAL;
+
+	if (cmd->autoneg == AUTONEG_DISABLE
+			&& ((cmd->speed != SPEED_1000
+					&& cmd->speed != SPEED_100
+					&& cmd->speed != SPEED_10)
+				|| (cmd->duplex != DUPLEX_HALF
+					&& cmd->duplex != DUPLEX_FULL)))
+		return -EINVAL;
+
+	phydev->autoneg = cmd->autoneg;
+
+	phydev->speed = cmd->speed;
+
+	phydev->advertising = cmd->advertising;
+
+	if (AUTONEG_ENABLE == cmd->autoneg)
+		phydev->advertising |= ADVERTISED_Autoneg;
+	else
+		phydev->advertising &= ~ADVERTISED_Autoneg;
+
+	phydev->duplex = cmd->duplex;
+
+	/* Restart the PHY */
+	phy_start_aneg(phydev);
+
+	return 0;
+}
+
+int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd)
+{
+	cmd->supported = phydev->supported;
+
+	cmd->advertising = phydev->advertising;
+
+	cmd->speed = phydev->speed;
+	cmd->duplex = phydev->duplex;
+	cmd->port = PORT_MII;
+	cmd->phy_address = phydev->addr;
+	cmd->transceiver = XCVR_EXTERNAL;
+	cmd->autoneg = phydev->autoneg;
+
+	return 0;
+}
+
+
+/* Note that this function is currently incompatible with the
+ * PHYCONTROL layer.  It changes registers without regard to
+ * current state.  Use at own risk
+ */
+int phy_mii_ioctl(struct phy_device *phydev,
+		struct mii_ioctl_data *mii_data, int cmd)
+{
+	u16 val = mii_data->val_in;
+
+	switch (cmd) {
+	case SIOCGMIIPHY:
+		mii_data->phy_id = phydev->addr;
+		break;
+	case SIOCGMIIREG:
+		mii_data->val_out = phy_read(phydev, mii_data->reg_num);
+		break;
+
+	case SIOCSMIIREG:
+		if (!capable(CAP_NET_ADMIN))
+			return -EPERM;
+
+		if (mii_data->phy_id == phydev->addr) {
+			switch(mii_data->reg_num) {
+			case MII_BMCR:
+				if (val & (BMCR_RESET|BMCR_ANENABLE))
+					phydev->autoneg = AUTONEG_DISABLE;
+				else
+					phydev->autoneg = AUTONEG_ENABLE;
+				if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
+					phydev->duplex = DUPLEX_FULL;
+				else
+					phydev->duplex = DUPLEX_HALF;
+				break;
+			case MII_ADVERTISE:
+				phydev->advertising = val;
+				break;
+			default:
+				/* do nothing */
+				break;
+			}
+		}
+
+		phy_write(phydev, mii_data->reg_num, val);
+		
+		if (mii_data->reg_num == MII_BMCR 
+				&& val & BMCR_RESET
+				&& phydev->drv->config_init)
+			phydev->drv->config_init(phydev);
+		break;
+	}
+
+	return 0;
+}
+
+/* phy_start_aneg
+ *
+ * description: Sanitizes the settings (if we're not
+ *   autonegotiating them), and then calls the driver's
+ *   config_aneg function.  If the PHYCONTROL Layer is operating,
+ *   we change the state to reflect the beginning of
+ *   Auto-negotiation or forcing.
+ */
+int phy_start_aneg(struct phy_device *phydev)
+{
+	int err;
+
+	spin_lock(&phydev->lock);
+
+	if (AUTONEG_DISABLE == phydev->autoneg)
+		phy_sanitize_settings(phydev);
+
+	err = phydev->drv->config_aneg(phydev);
+
+#ifdef CONFIG_PHYCONTROL
+	if (err < 0)
+		goto out_unlock;
+
+	if (phydev->state != PHY_HALTED) {
+		if (AUTONEG_ENABLE == phydev->autoneg) {
+			phydev->state = PHY_AN;
+			phydev->link_timeout = PHY_AN_TIMEOUT;
+		} else {
+			phydev->state = PHY_FORCING;
+			phydev->link_timeout = PHY_FORCE_TIMEOUT;
+		}
+	}
+
+out_unlock:
+#endif
+	spin_unlock(&phydev->lock);
+	return err;
+}
+EXPORT_SYMBOL(phy_start_aneg);
+
+
+#ifdef CONFIG_PHYCONTROL
+static void phy_change(void *data);
+static void phy_timer(unsigned long data);
+
+/* phy_start_machine:
+ *
+ * description: The PHY infrastructure can run a state machine
+ *   which tracks whether the PHY is starting up, negotiating,
+ *   etc.  This function starts the timer which tracks the state
+ *   of the PHY.  If you want to be notified when the state
+ *   changes, pass in the callback, otherwise, pass NULL.  If you
+ *   want to maintain your own state machine, do not call this
+ *   function. */
+void phy_start_machine(struct phy_device *phydev,
+		void (*handler)(struct net_device *))
+{
+	phydev->adjust_state = handler;
+
+	init_timer(&phydev->phy_timer);
+	phydev->phy_timer.function = &phy_timer;
+	phydev->phy_timer.data = (unsigned long) phydev;
+	mod_timer(&phydev->phy_timer, jiffies + HZ);
+}
+
+/* phy_stop_machine
+ *
+ * description: Stops the state machine timer, sets the state to
+ *   UP (unless it wasn't up yet), and then frees the interrupt,
+ *   if it is in use. This function must be called BEFORE
+ *   phy_detach.
+ */
+void phy_stop_machine(struct phy_device *phydev)
+{
+	del_timer_sync(&phydev->phy_timer);
+
+	spin_lock(&phydev->lock);
+	if (phydev->state > PHY_UP)
+		phydev->state = PHY_UP;
+	spin_unlock(&phydev->lock);
+
+	if (phydev->irq != PHY_POLL)
+		phy_stop_interrupts(phydev);
+
+	phydev->adjust_state = NULL;
+}
+
+/* phy_force_reduction
+ *
+ * description: Reduces the speed/duplex settings by
+ *   one notch.  The order is so:
+ *   1000/FULL, 1000/HALF, 100/FULL, 100/HALF,
+ *   10/FULL, 10/HALF.  The function bottoms out at 10/HALF.
+ */
+static void phy_force_reduction(struct phy_device *phydev)
+{
+	int idx;
+
+	idx = phy_find_setting(phydev->speed, phydev->duplex);
+	
+	idx++;
+
+	idx = phy_find_valid(idx, phydev->supported);
+
+	phydev->speed = settings[idx].speed;
+	phydev->duplex = settings[idx].duplex;
+
+	pr_info("Trying %d/%s\n", phydev->speed,
+			DUPLEX_FULL == phydev->duplex ?
+			"FULL" : "HALF");
+}
+
+
+/* phy_error:
+ *
+ * Moves the PHY to the HALTED state in response to a read
+ * or write error, and tells the controller the link is down.
+ * Must not be called from interrupt context, or while the
+ * phydev->lock is held.
+ */
+void phy_error(struct phy_device *phydev)
+{
+	spin_lock(&phydev->lock);
+	phydev->state = PHY_HALTED;
+	spin_unlock(&phydev->lock);
+}
+
+/* phy_interrupt
+ *
+ * description: When a PHY interrupt occurs, the handler disables
+ * interrupts, and schedules a work task to clear the interrupt.
+ */
+static irqreturn_t phy_interrupt(int irq, void *phy_dat, struct pt_regs *regs)
+{
+	struct phy_device *phydev = phy_dat;
+
+	/* The MDIO bus is not allowed to be written in interrupt
+	 * context, so we need to disable the irq here.  A work
+	 * queue will write the PHY to disable and clear the
+	 * interrupt, and then reenable the irq line. */
+	disable_irq_nosync(irq);
+
+	schedule_work(&phydev->phy_queue);
+
+	return IRQ_HANDLED;
+}
+
+/* Enable the interrupts from the PHY side */
+int phy_enable_interrupts(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_clear_interrupt(phydev);
+
+	if (err < 0)
+		return err;
+
+	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_enable_interrupts);
+
+/* Disable the PHY interrupts from the PHY side */
+int phy_disable_interrupts(struct phy_device *phydev)
+{
+	int err;
+
+	/* Disable PHY interrupts */
+	err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+
+	if (err)
+		goto phy_err;
+
+	/* Clear the interrupt */
+	err = phy_clear_interrupt(phydev);
+
+	if (err)
+		goto phy_err;
+
+	return 0;
+
+phy_err:
+	phy_error(phydev);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_disable_interrupts);
+
+/* phy_start_interrupts
+ *
+ * description: Request the interrupt for the given PHY.  If
+ *   this fails, then we set irq to PHY_POLL.
+ *   Otherwise, we enable the interrupts in the PHY.
+ *   Returns 0 on success.
+ *   This should only be called with a valid IRQ number.
+ */
+int phy_start_interrupts(struct phy_device *phydev)
+{
+	int err = 0;
+
+	INIT_WORK(&phydev->phy_queue, phy_change, phydev);
+
+	if (request_irq(phydev->irq, phy_interrupt,
+				SA_SHIRQ,
+				"phy_interrupt",
+				phydev) < 0) {
+		printk(KERN_WARNING "%s: Can't get IRQ %d (PHY)\n",
+				phydev->bus->name,
+				phydev->irq);
+		phydev->irq = PHY_POLL;
+		return 0;
+	}
+
+	err = phy_enable_interrupts(phydev);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_start_interrupts);
+
+int phy_stop_interrupts(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_disable_interrupts(phydev);
+
+	if (err)
+		phy_error(phydev);
+
+	free_irq(phydev->irq, phydev);
+
+	return err;
+}
+EXPORT_SYMBOL(phy_stop_interrupts);
+
+
+/* Scheduled by the phy_interrupt/timer to handle PHY changes */
+static void phy_change(void *data)
+{
+	int err;
+	struct phy_device *phydev = data;
+
+	err = phy_disable_interrupts(phydev);
+
+	if (err)
+		goto phy_err;
+
+	spin_lock(&phydev->lock);
+	if ((PHY_RUNNING == phydev->state) || (PHY_NOLINK == phydev->state))
+		phydev->state = PHY_CHANGELINK;
+	spin_unlock(&phydev->lock);
+
+	enable_irq(phydev->irq);
+
+	/* Reenable interrupts */
+	err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
+
+	if (err)
+		goto irq_enable_err;
+
+	return;
+
+irq_enable_err:
+	disable_irq(phydev->irq);
+phy_err:
+	phy_error(phydev);
+}
+
+/* Bring down the PHY link, and stop checking the status. */
+void phy_stop(struct phy_device *phydev)
+{
+	spin_lock(&phydev->lock);
+
+	if (PHY_HALTED == phydev->state)
+		goto out_unlock;
+
+	if (phydev->irq != PHY_POLL) {
+		/* Clear any pending interrupts */
+		phy_clear_interrupt(phydev);
+
+		/* Disable PHY Interrupts */
+		phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
+	}
+
+	phydev->state = PHY_HALTED;
+
+out_unlock:
+	spin_unlock(&phydev->lock);
+}
+
+
+/* phy_start
+ *
+ * description: Indicates the attached device's readiness to
+ *   handle PHY-related work.  Used during startup to start the
+ *   PHY, and after a call to phy_stop() to resume operation.
+ *   Also used to indicate the MDIO bus has cleared an error
+ *   condition.
+ */
+void phy_start(struct phy_device *phydev)
+{
+	spin_lock(&phydev->lock);
+
+	switch (phydev->state) {
+		case PHY_STARTING:
+			phydev->state = PHY_PENDING;
+			break;
+		case PHY_READY:
+			phydev->state = PHY_UP;
+			break;
+		case PHY_HALTED:
+			phydev->state = PHY_RESUMING;
+		default:
+			break;
+	}
+	spin_unlock(&phydev->lock);
+}
+EXPORT_SYMBOL(phy_stop);
+EXPORT_SYMBOL(phy_start);
+
+/* PHY timer which handles the state machine */
+static void phy_timer(unsigned long data)
+{
+	struct phy_device *phydev = (struct phy_device *)data;
+	int needs_aneg = 0;
+	int err = 0;
+
+	spin_lock(&phydev->lock);
+
+	if (phydev->adjust_state)
+		phydev->adjust_state(phydev->attached_dev);
+
+	switch(phydev->state) {
+		case PHY_DOWN:
+		case PHY_STARTING:
+		case PHY_READY:
+		case PHY_PENDING:
+			break;
+		case PHY_UP:
+			needs_aneg = 1;
+
+			phydev->link_timeout = PHY_AN_TIMEOUT;
+
+			break;
+		case PHY_AN:
+			/* Check if negotiation is done.  Break
+			 * if there's an error */
+			err = phy_aneg_done(phydev);
+			if (err < 0)
+				break;
+
+			/* If auto-negotiation is done, we change to
+			 * either RUNNING, or NOLINK */
+			if (err > 0) {
+				err = phy_read_status(phydev);
+
+				if (err)
+					break;
+
+				if (phydev->link) {
+					phydev->state = PHY_RUNNING;
+					netif_carrier_on(phydev->attached_dev);
+				} else {
+					phydev->state = PHY_NOLINK;
+					netif_carrier_off(phydev->attached_dev);
+				}
+
+				phydev->adjust_link(phydev->attached_dev);
+
+			} else if (0 == phydev->link_timeout--) {
+				/* The counter expired, so either we
+				 * switch to forced mode, or the
+				 * magic_aneg bit exists, and we try aneg
+				 * again */
+				if (!(phydev->drv->flags & PHY_HAS_MAGICANEG)) {
+					int idx;
+
+					/* We'll start from the
+					 * fastest speed, and work
+					 * our way down */
+					idx = phy_find_valid(0,
+							phydev->supported);
+
+					phydev->speed = settings[idx].speed;
+					phydev->duplex = settings[idx].duplex;
+					
+					phydev->autoneg = AUTONEG_DISABLE;
+					phydev->state = PHY_FORCING;
+					phydev->link_timeout =
+						PHY_FORCE_TIMEOUT;
+
+					pr_info("Trying %d/%s\n",
+							phydev->speed,
+							DUPLEX_FULL ==
+							phydev->duplex ?
+							"FULL" : "HALF");
+				}
+
+				needs_aneg = 1;
+			}
+			break;
+		case PHY_NOLINK:
+			err = phy_read_status(phydev);
+
+			if (err)
+				break;
+
+			if (phydev->link) {
+				phydev->state = PHY_RUNNING;
+				netif_carrier_on(phydev->attached_dev);
+				phydev->adjust_link(phydev->attached_dev);
+			}
+			break;
+		case PHY_FORCING:
+			err = phy_read_status(phydev);
+
+			if (err)
+				break;
+
+			if (phydev->link) {
+				phydev->state = PHY_RUNNING;
+				netif_carrier_on(phydev->attached_dev);
+			} else {
+				if (0 == phydev->link_timeout--) {
+					phy_force_reduction(phydev);
+					needs_aneg = 1;
+				}
+			}
+
+			phydev->adjust_link(phydev->attached_dev);
+			break;
+		case PHY_RUNNING:
+			/* Only register a CHANGE if we are
+			 * polling */
+			if (PHY_POLL == phydev->irq)
+				phydev->state = PHY_CHANGELINK;
+			break;
+		case PHY_CHANGELINK:
+			err = phy_read_status(phydev);
+
+			if (err)
+				break;
+
+			if (phydev->link) {
+				phydev->state = PHY_RUNNING;
+				netif_carrier_on(phydev->attached_dev);
+			} else {
+				phydev->state = PHY_NOLINK;
+				netif_carrier_off(phydev->attached_dev);
+			}
+
+			phydev->adjust_link(phydev->attached_dev);
+
+			if (PHY_POLL != phydev->irq)
+				err = phy_config_interrupt(phydev,
+						PHY_INTERRUPT_ENABLED);
+			break;
+		case PHY_HALTED:
+			if (phydev->link) {
+				phydev->link = 0;
+				netif_carrier_off(phydev->attached_dev);
+				phydev->adjust_link(phydev->attached_dev);
+			}
+			break;
+		case PHY_RESUMING:
+
+			err = phy_clear_interrupt(phydev);
+
+			if (err)
+				break;
+
+			err = phy_config_interrupt(phydev,
+					PHY_INTERRUPT_ENABLED);
+
+			if (err)
+				break;
+
+			if (AUTONEG_ENABLE == phydev->autoneg) {
+				err = phy_aneg_done(phydev);
+				if (err < 0)
+					break;
+
+				/* err > 0 if AN is done.
+				 * Otherwise, it's 0, and we're
+				 * still waiting for AN */
+				if (err > 0) {
+					phydev->state = PHY_RUNNING;
+				} else {
+					phydev->state = PHY_AN;
+					phydev->link_timeout = PHY_AN_TIMEOUT;
+				}
+			} else
+				phydev->state = PHY_RUNNING;
+			break;
+	}
+
+	spin_unlock(&phydev->lock);
+
+	if (needs_aneg)
+		err = phy_start_aneg(phydev);
+
+	if (err < 0)
+		phy_error(phydev);
+
+	mod_timer(&phydev->phy_timer, jiffies + PHY_STATE_TIME * HZ);
+}
+
+#endif /* CONFIG_PHYCONTROL */
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
new file mode 100644
index 00000000000..33f7bdb5857
--- /dev/null
+++ b/drivers/net/phy/phy_device.c
@@ -0,0 +1,696 @@
+/*
+ * drivers/net/phy/phy_device.c
+ *
+ * Framework for finding and configuring PHYs.
+ * Also contains generic PHY driver
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+static struct phy_driver genphy_driver;
+extern int mdio_bus_init(void);
+extern void mdio_bus_exit(void);
+
+/* get_phy_device
+ *
+ * description: Reads the ID registers of the PHY at addr on the
+ *   bus, then allocates and returns the phy_device to
+ *   represent it.
+ */
+struct phy_device * get_phy_device(struct mii_bus *bus, int addr)
+{
+	int phy_reg;
+	u32 phy_id;
+	struct phy_device *dev = NULL;
+
+	/* Grab the bits from PHYIR1, and put them
+	 * in the upper half */
+	phy_reg = bus->read(bus, addr, MII_PHYSID1);
+
+	if (phy_reg < 0)
+		return ERR_PTR(phy_reg);
+
+	phy_id = (phy_reg & 0xffff) << 16;
+
+	/* Grab the bits from PHYIR2, and put them in the lower half */
+	phy_reg = bus->read(bus, addr, MII_PHYSID2);
+
+	if (phy_reg < 0)
+		return ERR_PTR(phy_reg);
+
+	phy_id |= (phy_reg & 0xffff);
+
+	/* If the phy_id is all Fs, there is no device there */
+	if (0xffffffff == phy_id)
+		return NULL;
+
+	/* Otherwise, we allocate the device, and initialize the
+	 * default values */
+	dev = kcalloc(1, sizeof(*dev), GFP_KERNEL);
+
+	if (NULL == dev)
+		return ERR_PTR(-ENOMEM);
+
+	dev->speed = 0;
+	dev->duplex = -1;
+	dev->pause = dev->asym_pause = 0;
+	dev->link = 1;
+
+	dev->autoneg = AUTONEG_ENABLE;
+
+	dev->addr = addr;
+	dev->phy_id = phy_id;
+	dev->bus = bus;
+
+	dev->state = PHY_DOWN;
+
+	spin_lock_init(&dev->lock);
+
+	return dev;
+}
+
+#ifdef CONFIG_PHYCONTROL
+/* phy_prepare_link:
+ *
+ * description: Tells the PHY infrastructure to handle the
+ *   gory details on monitoring link status (whether through
+ *   polling or an interrupt), and to call back to the
+ *   connected device driver when the link status changes.
+ *   If you want to monitor your own link state, don't call
+ *   this function */
+void phy_prepare_link(struct phy_device *phydev,
+		void (*handler)(struct net_device *))
+{
+	phydev->adjust_link = handler;
+}
+
+/* phy_connect:
+ *
+ * description: Convenience function for connecting ethernet
+ *   devices to PHY devices.  The default behavior is for
+ *   the PHY infrastructure to handle everything, and only notify
+ *   the connected driver when the link status changes.  If you
+ *   don't want, or can't use the provided functionality, you may
+ *   choose to call only the subset of functions which provide
+ *   the desired functionality.
+ */
+struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
+		void (*handler)(struct net_device *), u32 flags)
+{
+	struct phy_device *phydev;
+
+	phydev = phy_attach(dev, phy_id, flags);
+
+	if (IS_ERR(phydev))
+		return phydev;
+
+	phy_prepare_link(phydev, handler);
+
+	phy_start_machine(phydev, NULL);
+
+	if (phydev->irq > 0)
+		phy_start_interrupts(phydev);
+
+	return phydev;
+}
+EXPORT_SYMBOL(phy_connect);
+
+void phy_disconnect(struct phy_device *phydev)
+{
+	if (phydev->irq > 0)
+		phy_stop_interrupts(phydev);
+
+	phy_stop_machine(phydev);
+	
+	phydev->adjust_link = NULL;
+
+	phy_detach(phydev);
+}
+EXPORT_SYMBOL(phy_disconnect);
+
+#endif /* CONFIG_PHYCONTROL */
+
+/* phy_attach:
+ *
+ *   description: Called by drivers to attach to a particular PHY
+ *     device. The phy_device is found, and properly hooked up
+ *     to the phy_driver.  If no driver is attached, then the
+ *     genphy_driver is used.  The phy_device is given a ptr to
+ *     the attaching device, and given a callback for link status
+ *     change.  The phy_device is returned to the attaching
+ *     driver.
+ */
+static int phy_compare_id(struct device *dev, void *data)
+{
+	return strcmp((char *)data, dev->bus_id) ? 0 : 1;
+}
+
+struct phy_device *phy_attach(struct net_device *dev,
+		const char *phy_id, u32 flags)
+{
+	struct bus_type *bus = &mdio_bus_type;
+	struct phy_device *phydev;
+	struct device *d;
+
+	/* Search the list of PHY devices on the mdio bus for the
+	 * PHY with the requested name */
+	d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
+
+	if (d) {
+		phydev = to_phy_device(d);
+	} else {
+		printk(KERN_ERR "%s not found\n", phy_id);
+		return ERR_PTR(-ENODEV);
+	}
+
+	/* Assume that if there is no driver, that it doesn't
+	 * exist, and we should use the genphy driver. */
+	if (NULL == d->driver) {
+		int err;
+		down_write(&d->bus->subsys.rwsem);
+		d->driver = &genphy_driver.driver;
+
+		err = d->driver->probe(d);
+
+		if (err < 0)
+			return ERR_PTR(err);
+
+		device_bind_driver(d);
+		up_write(&d->bus->subsys.rwsem);
+	}
+
+	if (phydev->attached_dev) {
+		printk(KERN_ERR "%s: %s already attached\n",
+				dev->name, phy_id);
+		return ERR_PTR(-EBUSY);
+	}
+
+	phydev->attached_dev = dev;
+
+	phydev->dev_flags = flags;
+
+	return phydev;
+}
+EXPORT_SYMBOL(phy_attach);
+
+void phy_detach(struct phy_device *phydev)
+{
+	phydev->attached_dev = NULL;
+
+	/* If the device had no specific driver before (i.e. - it
+	 * was using the generic driver), we unbind the device
+	 * from the generic driver so that there's a chance a
+	 * real driver could be loaded */
+	if (phydev->dev.driver == &genphy_driver.driver) {
+		down_write(&phydev->dev.bus->subsys.rwsem);
+		device_release_driver(&phydev->dev);
+		up_write(&phydev->dev.bus->subsys.rwsem);
+	}
+}
+EXPORT_SYMBOL(phy_detach);
+
+
+/* Generic PHY support and helper functions */
+
+/* genphy_config_advert
+ *
+ * description: Writes MII_ADVERTISE with the appropriate values,
+ *   after sanitizing the values to make sure we only advertise
+ *   what is supported
+ */
+int genphy_config_advert(struct phy_device *phydev)
+{
+	u32 advertise;
+	int adv;
+	int err;
+
+	/* Only allow advertising what
+	 * this PHY supports */
+	phydev->advertising &= phydev->supported;
+	advertise = phydev->advertising;
+
+	/* Setup standard advertisement */
+	adv = phy_read(phydev, MII_ADVERTISE);
+
+	if (adv < 0)
+		return adv;
+
+	adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP | 
+		 ADVERTISE_PAUSE_ASYM);
+	if (advertise & ADVERTISED_10baseT_Half)
+		adv |= ADVERTISE_10HALF;
+	if (advertise & ADVERTISED_10baseT_Full)
+		adv |= ADVERTISE_10FULL;
+	if (advertise & ADVERTISED_100baseT_Half)
+		adv |= ADVERTISE_100HALF;
+	if (advertise & ADVERTISED_100baseT_Full)
+		adv |= ADVERTISE_100FULL;
+	if (advertise & ADVERTISED_Pause)
+		adv |= ADVERTISE_PAUSE_CAP;
+	if (advertise & ADVERTISED_Asym_Pause)
+		adv |= ADVERTISE_PAUSE_ASYM;
+
+	err = phy_write(phydev, MII_ADVERTISE, adv);
+
+	if (err < 0)
+		return err;
+
+	/* Configure gigabit if it's supported */
+	if (phydev->supported & (SUPPORTED_1000baseT_Half |
+				SUPPORTED_1000baseT_Full)) {
+		adv = phy_read(phydev, MII_CTRL1000);
+
+		if (adv < 0)
+			return adv;
+
+		adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
+		if (advertise & SUPPORTED_1000baseT_Half)
+			adv |= ADVERTISE_1000HALF;
+		if (advertise & SUPPORTED_1000baseT_Full)
+			adv |= ADVERTISE_1000FULL;
+		err = phy_write(phydev, MII_CTRL1000, adv);
+
+		if (err < 0)
+			return err;
+	}
+
+	return adv;
+}
+EXPORT_SYMBOL(genphy_config_advert);
+
+/* genphy_setup_forced
+ *
+ * description: Configures MII_BMCR to force speed/duplex
+ *   to the values in phydev. Assumes that the values are valid.
+ *   Please see phy_sanitize_settings() */
+int genphy_setup_forced(struct phy_device *phydev)
+{
+	int ctl = BMCR_RESET;
+
+	phydev->pause = phydev->asym_pause = 0;
+
+	if (SPEED_1000 == phydev->speed)
+		ctl |= BMCR_SPEED1000;
+	else if (SPEED_100 == phydev->speed)
+		ctl |= BMCR_SPEED100;
+
+	if (DUPLEX_FULL == phydev->duplex)
+		ctl |= BMCR_FULLDPLX;
+	
+	ctl = phy_write(phydev, MII_BMCR, ctl);
+
+	if (ctl < 0)
+		return ctl;
+
+	/* We just reset the device, so we'd better configure any
+	 * settings the PHY requires to operate */
+	if (phydev->drv->config_init)
+		ctl = phydev->drv->config_init(phydev);
+
+	return ctl;
+}
+
+
+/* Enable and Restart Autonegotiation */
+int genphy_restart_aneg(struct phy_device *phydev)
+{
+	int ctl;
+
+	ctl = phy_read(phydev, MII_BMCR);
+
+	if (ctl < 0)
+		return ctl;
+
+	ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+
+	/* Don't isolate the PHY if we're negotiating */
+	ctl &= ~(BMCR_ISOLATE);
+
+	ctl = phy_write(phydev, MII_BMCR, ctl);
+
+	return ctl;
+}
+
+
+/* genphy_config_aneg
+ *
+ * description: If auto-negotiation is enabled, we configure the
+ *   advertising, and then restart auto-negotiation.  If it is not
+ *   enabled, then we write the BMCR
+ */
+int genphy_config_aneg(struct phy_device *phydev)
+{
+	int err = 0;
+
+	if (AUTONEG_ENABLE == phydev->autoneg) {
+		err = genphy_config_advert(phydev);
+
+		if (err < 0)
+			return err;
+
+		err = genphy_restart_aneg(phydev);
+	} else
+		err = genphy_setup_forced(phydev);
+
+	return err;
+}
+EXPORT_SYMBOL(genphy_config_aneg);
+
+/* genphy_update_link
+ *
+ * description: Update the value in phydev->link to reflect the
+ *   current link value.  In order to do this, we need to read
+ *   the status register twice, keeping the second value
+ */
+int genphy_update_link(struct phy_device *phydev)
+{
+	int status;
+
+	/* Do a fake read */
+	status = phy_read(phydev, MII_BMSR);
+
+	if (status < 0)
+		return status;
+
+	/* Read link and autonegotiation status */
+	status = phy_read(phydev, MII_BMSR);
+
+	if (status < 0)
+		return status;
+
+	if ((status & BMSR_LSTATUS) == 0)
+		phydev->link = 0;
+	else
+		phydev->link = 1;
+
+	return 0;
+}
+
+/* genphy_read_status
+ *
+ * description: Check the link, then figure out the current state
+ *   by comparing what we advertise with what the link partner
+ *   advertises.  Start by checking the gigabit possibilities,
+ *   then move on to 10/100.
+ */
+int genphy_read_status(struct phy_device *phydev)
+{
+	int adv;
+	int err;
+	int lpa;
+	int lpagb = 0;
+
+	/* Update the link, but return if there
+	 * was an error */
+	err = genphy_update_link(phydev);
+	if (err)
+		return err;
+
+	if (AUTONEG_ENABLE == phydev->autoneg) {
+		if (phydev->supported & (SUPPORTED_1000baseT_Half
+					| SUPPORTED_1000baseT_Full)) {
+			lpagb = phy_read(phydev, MII_STAT1000);
+
+			if (lpagb < 0)
+				return lpagb;
+
+			adv = phy_read(phydev, MII_CTRL1000);
+
+			if (adv < 0)
+				return adv;
+
+			lpagb &= adv << 2;
+		}
+
+		lpa = phy_read(phydev, MII_LPA);
+
+		if (lpa < 0)
+			return lpa;
+
+		adv = phy_read(phydev, MII_ADVERTISE);
+
+		if (adv < 0)
+			return adv;
+
+		lpa &= adv;
+
+		phydev->speed = SPEED_10;
+		phydev->duplex = DUPLEX_HALF;
+		phydev->pause = phydev->asym_pause = 0;
+
+		if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
+			phydev->speed = SPEED_1000;
+
+			if (lpagb & LPA_1000FULL)
+				phydev->duplex = DUPLEX_FULL;
+		} else if (lpa & (LPA_100FULL | LPA_100HALF)) {
+			phydev->speed = SPEED_100;
+			
+			if (lpa & LPA_100FULL)
+				phydev->duplex = DUPLEX_FULL;
+		} else
+			if (lpa & LPA_10FULL)
+				phydev->duplex = DUPLEX_FULL;
+
+		if (phydev->duplex == DUPLEX_FULL){
+			phydev->pause = lpa & LPA_PAUSE_CAP ? 1 : 0;
+			phydev->asym_pause = lpa & LPA_PAUSE_ASYM ? 1 : 0;
+		}
+	} else {
+		int bmcr = phy_read(phydev, MII_BMCR);
+		if (bmcr < 0)
+			return bmcr;
+
+		if (bmcr & BMCR_FULLDPLX)
+			phydev->duplex = DUPLEX_FULL;
+		else
+			phydev->duplex = DUPLEX_HALF;
+
+		if (bmcr & BMCR_SPEED1000)
+			phydev->speed = SPEED_1000;
+		else if (bmcr & BMCR_SPEED100)
+			phydev->speed = SPEED_100;
+		else
+			phydev->speed = SPEED_10;
+
+		phydev->pause = phydev->asym_pause = 0;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL(genphy_read_status);
+
+static int genphy_config_init(struct phy_device *phydev)
+{
+	u32 val;
+	u32 features;
+
+	/* For now, I'll claim that the generic driver supports
+	 * all possible port types */
+	features = (SUPPORTED_TP | SUPPORTED_MII
+			| SUPPORTED_AUI | SUPPORTED_FIBRE |
+			SUPPORTED_BNC);
+
+	/* Do we support autonegotiation? */
+	val = phy_read(phydev, MII_BMSR);
+
+	if (val < 0)
+		return val;
+
+	if (val & BMSR_ANEGCAPABLE)
+		features |= SUPPORTED_Autoneg;
+
+	if (val & BMSR_100FULL)
+		features |= SUPPORTED_100baseT_Full;
+	if (val & BMSR_100HALF)
+		features |= SUPPORTED_100baseT_Half;
+	if (val & BMSR_10FULL)
+		features |= SUPPORTED_10baseT_Full;
+	if (val & BMSR_10HALF)
+		features |= SUPPORTED_10baseT_Half;
+
+	if (val & BMSR_ESTATEN) {
+		val = phy_read(phydev, MII_ESTATUS);
+
+		if (val < 0)
+			return val;
+
+		if (val & ESTATUS_1000_TFULL)
+			features |= SUPPORTED_1000baseT_Full;
+		if (val & ESTATUS_1000_THALF)
+			features |= SUPPORTED_1000baseT_Half;
+	}
+
+	phydev->supported = features;
+	phydev->advertising = features;
+
+	return 0;
+}
+
+
+/* phy_probe
+ *
+ * description: Take care of setting up the phy_device structure,
+ *   set the state to READY (the driver's init function should
+ *   set it to STARTING if needed).
+ */
+static int phy_probe(struct device *dev)
+{
+	struct phy_device *phydev;
+	struct phy_driver *phydrv;
+	struct device_driver *drv;
+	int err = 0;
+
+	phydev = to_phy_device(dev);
+
+	/* Make sure the driver is held.
+	 * XXX -- Is this correct? */
+	drv = get_driver(phydev->dev.driver);
+	phydrv = to_phy_driver(drv);
+	phydev->drv = phydrv;
+
+	/* Disable the interrupt if the PHY doesn't support it */
+	if (!(phydrv->flags & PHY_HAS_INTERRUPT))
+		phydev->irq = PHY_POLL;
+
+	spin_lock(&phydev->lock);
+
+	/* Start out supporting everything. Eventually,
+	 * a controller will attach, and may modify one
+	 * or both of these values */
+	phydev->supported = phydrv->features;
+	phydev->advertising = phydrv->features;
+
+	/* Set the state to READY by default */
+	phydev->state = PHY_READY;
+
+	if (phydev->drv->probe)
+		err = phydev->drv->probe(phydev);
+
+	spin_unlock(&phydev->lock);
+
+	if (err < 0)
+		return err;
+
+	if (phydev->drv->config_init)
+		err = phydev->drv->config_init(phydev);
+
+	return err;
+}
+
+static int phy_remove(struct device *dev)
+{
+	struct phy_device *phydev;
+
+	phydev = to_phy_device(dev);
+
+	spin_lock(&phydev->lock);
+	phydev->state = PHY_DOWN;
+	spin_unlock(&phydev->lock);
+
+	if (phydev->drv->remove)
+		phydev->drv->remove(phydev);
+
+	put_driver(dev->driver);
+	phydev->drv = NULL;
+
+	return 0;
+}
+
+int phy_driver_register(struct phy_driver *new_driver)
+{
+	int retval;
+
+	memset(&new_driver->driver, 0, sizeof(new_driver->driver));
+	new_driver->driver.name = new_driver->name;
+	new_driver->driver.bus = &mdio_bus_type;
+	new_driver->driver.probe = phy_probe;
+	new_driver->driver.remove = phy_remove;
+
+	retval = driver_register(&new_driver->driver);
+
+	if (retval) {
+		printk(KERN_ERR "%s: Error %d in registering driver\n",
+				new_driver->name, retval);
+
+		return retval;
+	}
+
+	pr_info("%s: Registered new driver\n", new_driver->name);
+
+	return 0;
+}
+EXPORT_SYMBOL(phy_driver_register);
+
+void phy_driver_unregister(struct phy_driver *drv)
+{
+	driver_unregister(&drv->driver);
+}
+EXPORT_SYMBOL(phy_driver_unregister);
+
+static struct phy_driver genphy_driver = {
+	.phy_id		= 0xffffffff,
+	.phy_id_mask	= 0xffffffff,
+	.name		= "Generic PHY",
+	.config_init	= genphy_config_init,
+	.features	= 0,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.driver		= {.owner= THIS_MODULE, },
+};
+
+static int __init phy_init(void)
+{
+	int rc;
+
+	rc = mdio_bus_init();
+	if (rc)
+		return rc;
+
+	rc = phy_driver_register(&genphy_driver);
+	if (rc)
+		mdio_bus_exit();
+
+	return rc;
+}
+
+static void __exit phy_exit(void)
+{
+	phy_driver_unregister(&genphy_driver);
+	mdio_bus_exit();
+}
+
+subsys_initcall(phy_init);
+module_exit(phy_exit);
diff --git a/drivers/net/phy/qsemi.c b/drivers/net/phy/qsemi.c
new file mode 100644
index 00000000000..d461ba45763
--- /dev/null
+++ b/drivers/net/phy/qsemi.c
@@ -0,0 +1,143 @@
+/*
+ * drivers/net/phy/qsemi.c
+ *
+ * Driver for Quality Semiconductor PHYs
+ *
+ * Author: Andy Fleming
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/unistd.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/mii.h>
+#include <linux/ethtool.h>
+#include <linux/phy.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+/* ------------------------------------------------------------------------- */
+/* The Quality Semiconductor QS6612 is used on the RPX CLLF                  */
+
+/* register definitions */
+
+#define MII_QS6612_MCR		17  /* Mode Control Register      */
+#define MII_QS6612_FTR		27  /* Factory Test Register      */
+#define MII_QS6612_MCO		28  /* Misc. Control Register     */
+#define MII_QS6612_ISR		29  /* Interrupt Source Register  */
+#define MII_QS6612_IMR		30  /* Interrupt Mask Register    */
+#define MII_QS6612_IMR_INIT	0x003a
+#define MII_QS6612_PCR		31  /* 100BaseTx PHY Control Reg. */
+
+#define QS6612_PCR_AN_COMPLETE	0x1000
+#define QS6612_PCR_RLBEN	0x0200
+#define QS6612_PCR_DCREN	0x0100
+#define QS6612_PCR_4B5BEN	0x0040
+#define QS6612_PCR_TX_ISOLATE	0x0020
+#define QS6612_PCR_MLT3_DIS	0x0002
+#define QS6612_PCR_SCRM_DESCRM	0x0001
+
+MODULE_DESCRIPTION("Quality Semiconductor PHY driver");
+MODULE_AUTHOR("Andy Fleming");
+MODULE_LICENSE("GPL");
+
+/* Returns 0, unless there's a write error */
+static int qs6612_config_init(struct phy_device *phydev)
+{
+	/* The PHY powers up isolated on the RPX,
+	 * so send a command to allow operation.
+	 * XXX - My docs indicate this should be 0x0940
+	 * ...or something.  The current value sets three
+	 * reserved bits, bit 11, which specifies it should be
+	 * set to one, bit 10, which specifies it should be set
+	 * to 0, and bit 7, which doesn't specify.  However, my
+	 * docs are preliminary, and I will leave it like this
+	 * until someone more knowledgable corrects me or it.
+	 * -- Andy Fleming
+	 */
+	return phy_write(phydev, MII_QS6612_PCR, 0x0dc0);
+}
+
+static int qs6612_ack_interrupt(struct phy_device *phydev)
+{
+	int err;
+
+	err = phy_read(phydev, MII_QS6612_ISR);
+
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_BMSR);
+
+	if (err < 0)
+		return err;
+
+	err = phy_read(phydev, MII_EXPANSION);
+
+	if (err < 0)
+		return err;
+
+	return 0;
+}
+
+static int qs6612_config_intr(struct phy_device *phydev)
+{
+	int err;
+	if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
+		err = phy_write(phydev, MII_QS6612_IMR,
+				MII_QS6612_IMR_INIT);
+	else
+		err = phy_write(phydev, MII_QS6612_IMR, 0);
+
+	return err;
+
+}
+
+static struct phy_driver qs6612_driver = {
+	.phy_id		= 0x00181440,
+	.name		= "QS6612",
+	.phy_id_mask	= 0xfffffff0,
+	.features	= PHY_BASIC_FEATURES,
+	.flags		= PHY_HAS_INTERRUPT,
+	.config_init	= qs6612_config_init,
+	.config_aneg	= genphy_config_aneg,
+	.read_status	= genphy_read_status,
+	.ack_interrupt	= qs6612_ack_interrupt,
+	.config_intr	= qs6612_config_intr,
+	.driver 	= { .owner = THIS_MODULE,},
+};
+
+static int __init qs6612_init(void)
+{
+	return phy_driver_register(&qs6612_driver);
+}
+
+static void __exit qs6612_exit(void)
+{
+	phy_driver_unregister(&qs6612_driver);
+}
+
+module_init(qs6612_init);
+module_exit(qs6612_exit);
diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c
index a32668e88e0..bb71638a7c4 100644
--- a/drivers/net/ppp_generic.c
+++ b/drivers/net/ppp_generic.c
@@ -1657,7 +1657,6 @@ ppp_receive_nonmp_frame(struct ppp *ppp, struct sk_buff *skb)
 			skb->dev = ppp->dev;
 			skb->protocol = htons(npindex_to_ethertype[npi]);
 			skb->mac.raw = skb->data;
-			skb->input_dev = ppp->dev;
 			netif_rx(skb);
 			ppp->dev->last_rx = jiffies;
 		}
diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c
index ce1a9bf7b9a..82f236cc3b9 100644
--- a/drivers/net/pppoe.c
+++ b/drivers/net/pppoe.c
@@ -377,7 +377,8 @@ abort_kfree:
  ***********************************************************************/
 static int pppoe_rcv(struct sk_buff *skb,
 		     struct net_device *dev,
-		     struct packet_type *pt)
+		     struct packet_type *pt,
+		     struct net_device *orig_dev)
 
 {
 	struct pppoe_hdr *ph;
@@ -426,7 +427,8 @@ out:
  ***********************************************************************/
 static int pppoe_disc_rcv(struct sk_buff *skb,
 			  struct net_device *dev,
-			  struct packet_type *pt)
+			  struct packet_type *pt,
+			  struct net_device *orig_dev)
 
 {
 	struct pppoe_hdr *ph;
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index d5afe05cd82..f0471d102e3 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -187,6 +187,7 @@ static struct pci_device_id rtl8169_pci_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_REALTEK,	0x8169), },
 	{ PCI_DEVICE(PCI_VENDOR_ID_DLINK,	0x4300), },
 	{ PCI_DEVICE(0x16ec,			0x0116), },
+	{ PCI_VENDOR_ID_LINKSYS,		0x1032, PCI_ANY_ID, 0x0024, },
 	{0,},
 };
 
diff --git a/drivers/net/rrunner.c b/drivers/net/rrunner.c
index 12a86f96d97..ec1a18d189a 100644
--- a/drivers/net/rrunner.c
+++ b/drivers/net/rrunner.c
@@ -1429,6 +1429,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	struct rr_private *rrpriv = netdev_priv(dev);
 	struct rr_regs __iomem *regs = rrpriv->regs;
+	struct hippi_cb *hcb = (struct hippi_cb *) skb->cb;
 	struct ring_ctrl *txctrl;
 	unsigned long flags;
 	u32 index, len = skb->len;
@@ -1460,7 +1461,7 @@ static int rr_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	ifield = (u32 *)skb_push(skb, 8);
 
 	ifield[0] = 0;
-	ifield[1] = skb->private.ifield;
+	ifield[1] = hcb->ifield;
 
 	/*
 	 * We don't need the lock before we are actually going to start
diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h
index 7092ca6b277..2234a8f05eb 100644
--- a/drivers/net/s2io-regs.h
+++ b/drivers/net/s2io-regs.h
@@ -62,6 +62,7 @@ typedef struct _XENA_dev_config {
 #define ADAPTER_STATUS_RMAC_REMOTE_FAULT   BIT(6)
 #define ADAPTER_STATUS_RMAC_LOCAL_FAULT    BIT(7)
 #define ADAPTER_STATUS_RMAC_PCC_IDLE       vBIT(0xFF,8,8)
+#define ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE  vBIT(0x0F,8,8)
 #define ADAPTER_STATUS_RC_PRC_QUIESCENT    vBIT(0xFF,16,8)
 #define ADAPTER_STATUS_MC_DRAM_READY       BIT(24)
 #define ADAPTER_STATUS_MC_QUEUES_READY     BIT(25)
@@ -77,21 +78,34 @@ typedef struct _XENA_dev_config {
 #define ADAPTER_ECC_EN                     BIT(55)
 
 	u64 serr_source;
-#define SERR_SOURCE_PIC					BIT(0)
-#define SERR_SOURCE_TXDMA				BIT(1)
-#define SERR_SOURCE_RXDMA				BIT(2)
+#define SERR_SOURCE_PIC			BIT(0)
+#define SERR_SOURCE_TXDMA		BIT(1)
+#define SERR_SOURCE_RXDMA		BIT(2)
 #define SERR_SOURCE_MAC                 BIT(3)
 #define SERR_SOURCE_MC                  BIT(4)
 #define SERR_SOURCE_XGXS                BIT(5)
-#define	SERR_SOURCE_ANY					(SERR_SOURCE_PIC		| \
-										SERR_SOURCE_TXDMA	| \
-										SERR_SOURCE_RXDMA	| \
-										SERR_SOURCE_MAC		| \
-										SERR_SOURCE_MC      | \
-										SERR_SOURCE_XGXS)
-
-
-	u8 unused_0[0x800 - 0x120];
+#define	SERR_SOURCE_ANY			(SERR_SOURCE_PIC	| \
+					SERR_SOURCE_TXDMA	| \
+					SERR_SOURCE_RXDMA	| \
+					SERR_SOURCE_MAC		| \
+					SERR_SOURCE_MC		| \
+					SERR_SOURCE_XGXS)
+
+	u64 pci_mode;
+#define	GET_PCI_MODE(val)		((val & vBIT(0xF, 0, 4)) >> 60)
+#define	PCI_MODE_PCI_33			0
+#define	PCI_MODE_PCI_66			0x1
+#define	PCI_MODE_PCIX_M1_66		0x2
+#define	PCI_MODE_PCIX_M1_100		0x3
+#define	PCI_MODE_PCIX_M1_133		0x4
+#define	PCI_MODE_PCIX_M2_66		0x5
+#define	PCI_MODE_PCIX_M2_100		0x6
+#define	PCI_MODE_PCIX_M2_133		0x7
+#define	PCI_MODE_UNSUPPORTED		BIT(0)
+#define	PCI_MODE_32_BITS		BIT(8)
+#define	PCI_MODE_UNKNOWN_MODE		BIT(9)
+
+	u8 unused_0[0x800 - 0x128];
 
 /* PCI-X Controller registers */
 	u64 pic_int_status;
@@ -153,7 +167,11 @@ typedef struct _XENA_dev_config {
 	u8 unused4[0x08];
 
 	u64 gpio_int_reg;
+#define GPIO_INT_REG_LINK_DOWN                 BIT(1)
+#define GPIO_INT_REG_LINK_UP                   BIT(2)
 	u64 gpio_int_mask;
+#define GPIO_INT_MASK_LINK_DOWN                BIT(1)
+#define GPIO_INT_MASK_LINK_UP                  BIT(2)
 	u64 gpio_alarms;
 
 	u8 unused5[0x38];
@@ -223,19 +241,16 @@ typedef struct _XENA_dev_config {
 	u64 xmsi_data;
 
 	u64 rx_mat;
+#define RX_MAT_SET(ring, msi)			vBIT(msi, (8 * ring), 8)
 
 	u8 unused6[0x8];
 
-	u64 tx_mat0_7;
-	u64 tx_mat8_15;
-	u64 tx_mat16_23;
-	u64 tx_mat24_31;
-	u64 tx_mat32_39;
-	u64 tx_mat40_47;
-	u64 tx_mat48_55;
-	u64 tx_mat56_63;
+	u64 tx_mat0_n[0x8];
+#define TX_MAT_SET(fifo, msi)			vBIT(msi, (8 * fifo), 8)
 
-	u8 unused_1[0x10];
+	u8 unused_1[0x8];
+	u64 stat_byte_cnt;
+#define STAT_BC(n)                              vBIT(n,4,12)
 
 	/* Automated statistics collection */
 	u64 stat_cfg;
@@ -246,6 +261,7 @@ typedef struct _XENA_dev_config {
 #define STAT_TRSF_PER(n)           TBD
 #define	PER_SEC					   0x208d5
 #define	SET_UPDT_PERIOD(n)		   vBIT((PER_SEC*n),32,32)
+#define	SET_UPDT_CLICKS(val)		   vBIT(val, 32, 32)
 
 	u64 stat_addr;
 
@@ -267,8 +283,15 @@ typedef struct _XENA_dev_config {
 
 	u64 gpio_control;
 #define GPIO_CTRL_GPIO_0		BIT(8)
+	u64 misc_control;
+#define MISC_LINK_STABILITY_PRD(val)   vBIT(val,29,3)
+
+	u8 unused7_1[0x240 - 0x208];
+
+	u64 wreq_split_mask;
+#define	WREQ_SPLIT_MASK_SET_MASK(val)	vBIT(val, 52, 12)
 
-	u8 unused7[0x600];
+	u8 unused7_2[0x800 - 0x248];
 
 /* TxDMA registers */
 	u64 txdma_int_status;
@@ -290,6 +313,7 @@ typedef struct _XENA_dev_config {
 
 	u64 pcc_err_reg;
 #define PCC_FB_ECC_DB_ERR		vBIT(0xFF, 16, 8)
+#define PCC_ENABLE_FOUR			vBIT(0x0F,0,8)
 
 	u64 pcc_err_mask;
 	u64 pcc_err_alarm;
@@ -468,6 +492,7 @@ typedef struct _XENA_dev_config {
 #define PRC_CTRL_NO_SNOOP                      (BIT(22)|BIT(23))
 #define PRC_CTRL_NO_SNOOP_DESC                 BIT(22)
 #define PRC_CTRL_NO_SNOOP_BUFF                 BIT(23)
+#define PRC_CTRL_BIMODAL_INTERRUPT             BIT(37)
 #define PRC_CTRL_RXD_BACKOFF_INTERVAL(val)     vBIT(val,40,24)
 
 	u64 prc_alarm_action;
@@ -691,6 +716,10 @@ typedef struct _XENA_dev_config {
 #define MC_ERR_REG_MIRI_CRI_ERR_0          BIT(22)
 #define MC_ERR_REG_MIRI_CRI_ERR_1          BIT(23)
 #define MC_ERR_REG_SM_ERR                  BIT(31)
+#define MC_ERR_REG_ECC_ALL_SNG		   (BIT(6) | \
+					BIT(7) | BIT(17) | BIT(19))
+#define MC_ERR_REG_ECC_ALL_DBL		   (BIT(14) | \
+					BIT(15) | BIT(18) | BIT(20))
 	u64 mc_err_mask;
 	u64 mc_err_alarm;
 
@@ -736,7 +765,19 @@ typedef struct _XENA_dev_config {
 	u64 mc_rldram_test_d1;
 	u8 unused24[0x300 - 0x288];
 	u64 mc_rldram_test_d2;
-	u8 unused25[0x700 - 0x308];
+
+	u8 unused24_1[0x360 - 0x308];
+	u64 mc_rldram_ctrl;
+#define	MC_RLDRAM_ENABLE_ODT		BIT(7)
+
+	u8 unused24_2[0x640 - 0x368];
+	u64 mc_rldram_ref_per_herc;
+#define	MC_RLDRAM_SET_REF_PERIOD(val)	vBIT(val, 0, 16)
+
+	u8 unused24_3[0x660 - 0x648];
+	u64 mc_rldram_mrs_herc;
+
+	u8 unused25[0x700 - 0x668];
 	u64 mc_debug_ctrl;
 
 	u8 unused26[0x3000 - 0x2f08];
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index ea638b162d3..7ca78228b10 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -11,29 +11,28 @@
  * See the file COPYING in this distribution for more information.
  *
  * Credits:
- * Jeff Garzik		: For pointing out the improper error condition 
- *			  check in the s2io_xmit routine and also some 
- * 			  issues in the Tx watch dog function. Also for
- *			  patiently answering all those innumerable 
+ * Jeff Garzik		: For pointing out the improper error condition
+ *			  check in the s2io_xmit routine and also some
+ *			  issues in the Tx watch dog function. Also for
+ *			  patiently answering all those innumerable
  *			  questions regaring the 2.6 porting issues.
  * Stephen Hemminger	: Providing proper 2.6 porting mechanism for some
  *			  macros available only in 2.6 Kernel.
- * Francois Romieu	: For pointing out all code part that were 
+ * Francois Romieu	: For pointing out all code part that were
  *			  deprecated and also styling related comments.
- * Grant Grundler	: For helping me get rid of some Architecture 
+ * Grant Grundler	: For helping me get rid of some Architecture
  *			  dependent code.
  * Christopher Hellwig	: Some more 2.6 specific issues in the driver.
- *			  	
+ *
  * The module loadable parameters that are supported by the driver and a brief
  * explaination of all the variables.
- * rx_ring_num : This can be used to program the number of receive rings used 
- * in the driver.  					
- * rx_ring_len: This defines the number of descriptors each ring can have. This 
+ * rx_ring_num : This can be used to program the number of receive rings used
+ * in the driver.
+ * rx_ring_len: This defines the number of descriptors each ring can have. This
  * is also an array of size 8.
  * tx_fifo_num: This defines the number of Tx FIFOs thats used int the driver.
- * tx_fifo_len: This too is an array of 8. Each element defines the number of 
+ * tx_fifo_len: This too is an array of 8. Each element defines the number of
  * Tx descriptors that can be associated with each corresponding FIFO.
- * in PCI Configuration space.
  ************************************************************************/
 
 #include <linux/config.h>
@@ -56,27 +55,39 @@
 #include <linux/ethtool.h>
 #include <linux/version.h>
 #include <linux/workqueue.h>
+#include <linux/if_vlan.h>
 
-#include <asm/io.h>
 #include <asm/system.h>
 #include <asm/uaccess.h>
+#include <asm/io.h>
 
 /* local include */
 #include "s2io.h"
 #include "s2io-regs.h"
 
 /* S2io Driver name & version. */
-static char s2io_driver_name[] = "s2io";
-static char s2io_driver_version[] = "Version 1.7.7.1";
+static char s2io_driver_name[] = "Neterion";
+static char s2io_driver_version[] = "Version 2.0.3.1";
+
+static inline int RXD_IS_UP2DT(RxD_t *rxdp)
+{
+	int ret;
+
+	ret = ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
+		(GET_RXD_MARKER(rxdp->Control_2) != THE_RXD_MARK));
 
-/* 
+	return ret;
+}
+
+/*
  * Cards with following subsystem_id have a link state indication
  * problem, 600B, 600C, 600D, 640B, 640C and 640D.
  * macro below identifies these cards given the subsystem_id.
  */
-#define CARDS_WITH_FAULTY_LINK_INDICATORS(subid) \
-		(((subid >= 0x600B) && (subid <= 0x600D)) || \
-		 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0
+#define CARDS_WITH_FAULTY_LINK_INDICATORS(dev_type, subid) \
+	(dev_type == XFRAME_I_DEVICE) ?			\
+		((((subid >= 0x600B) && (subid <= 0x600D)) || \
+		 ((subid >= 0x640B) && (subid <= 0x640D))) ? 1 : 0) : 0
 
 #define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
 				      ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
@@ -86,9 +97,12 @@ static char s2io_driver_version[] = "Version 1.7.7.1";
 static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
 {
 	int level = 0;
-	if ((sp->pkt_cnt[ring] - rxb_size) > 16) {
+	mac_info_t *mac_control;
+
+	mac_control = &sp->mac_control;
+	if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16) {
 		level = LOW;
-		if ((sp->pkt_cnt[ring] - rxb_size) < MAX_RXDS_PER_BLOCK) {
+		if (rxb_size <= MAX_RXDS_PER_BLOCK) {
 			level = PANIC;
 		}
 	}
@@ -145,6 +159,9 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
 	{"rmac_pause_cnt"},
 	{"rmac_accepted_ip"},
 	{"rmac_err_tcp"},
+	{"\n DRIVER STATISTICS"},
+	{"single_bit_ecc_errs"},
+	{"double_bit_ecc_errs"},
 };
 
 #define S2IO_STAT_LEN sizeof(ethtool_stats_keys)/ ETH_GSTRING_LEN
@@ -153,8 +170,37 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
 #define S2IO_TEST_LEN	sizeof(s2io_gstrings) / ETH_GSTRING_LEN
 #define S2IO_STRINGS_LEN	S2IO_TEST_LEN * ETH_GSTRING_LEN
 
+#define S2IO_TIMER_CONF(timer, handle, arg, exp)		\
+			init_timer(&timer);			\
+			timer.function = handle;		\
+			timer.data = (unsigned long) arg;	\
+			mod_timer(&timer, (jiffies + exp))	\
+
+/* Add the vlan */
+static void s2io_vlan_rx_register(struct net_device *dev,
+					struct vlan_group *grp)
+{
+	nic_t *nic = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nic->tx_lock, flags);
+	nic->vlgrp = grp;
+	spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
+
+/* Unregister the vlan */
+static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
+{
+	nic_t *nic = dev->priv;
+	unsigned long flags;
+
+	spin_lock_irqsave(&nic->tx_lock, flags);
+	if (nic->vlgrp)
+		nic->vlgrp->vlan_devices[vid] = NULL;
+	spin_unlock_irqrestore(&nic->tx_lock, flags);
+}
 
-/* 
+/*
  * Constants to be programmed into the Xena's registers, to configure
  * the XAUI.
  */
@@ -162,7 +208,28 @@ static char ethtool_stats_keys[][ETH_GSTRING_LEN] = {
 #define SWITCH_SIGN	0xA5A5A5A5A5A5A5A5ULL
 #define	END_SIGN	0x0
 
-static u64 default_mdio_cfg[] = {
+static u64 herc_act_dtx_cfg[] = {
+	/* Set address */
+	0x8000051536750000ULL, 0x80000515367500E0ULL,
+	/* Write data */
+	0x8000051536750004ULL, 0x80000515367500E4ULL,
+	/* Set address */
+	0x80010515003F0000ULL, 0x80010515003F00E0ULL,
+	/* Write data */
+	0x80010515003F0004ULL, 0x80010515003F00E4ULL,
+	/* Set address */
+	0x801205150D440000ULL, 0x801205150D4400E0ULL,
+	/* Write data */
+	0x801205150D440004ULL, 0x801205150D4400E4ULL,
+	/* Set address */
+	0x80020515F2100000ULL, 0x80020515F21000E0ULL,
+	/* Write data */
+	0x80020515F2100004ULL, 0x80020515F21000E4ULL,
+	/* Done */
+	END_SIGN
+};
+
+static u64 xena_mdio_cfg[] = {
 	/* Reset PMA PLL */
 	0xC001010000000000ULL, 0xC0010100000000E0ULL,
 	0xC0010100008000E4ULL,
@@ -172,7 +239,7 @@ static u64 default_mdio_cfg[] = {
 	END_SIGN
 };
 
-static u64 default_dtx_cfg[] = {
+static u64 xena_dtx_cfg[] = {
 	0x8000051500000000ULL, 0x80000515000000E0ULL,
 	0x80000515D93500E4ULL, 0x8001051500000000ULL,
 	0x80010515000000E0ULL, 0x80010515001E00E4ULL,
@@ -196,8 +263,7 @@ static u64 default_dtx_cfg[] = {
 	END_SIGN
 };
 
-
-/* 
+/*
  * Constants for Fixing the MacAddress problem seen mostly on
  * Alpha machines.
  */
@@ -226,20 +292,25 @@ static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
 static unsigned int rx_ring_num = 1;
 static unsigned int rx_ring_sz[MAX_RX_RINGS] =
     {[0 ...(MAX_RX_RINGS - 1)] = 0 };
-static unsigned int Stats_refresh_time = 4;
+static unsigned int rts_frm_len[MAX_RX_RINGS] =
+    {[0 ...(MAX_RX_RINGS - 1)] = 0 };
+static unsigned int use_continuous_tx_intrs = 1;
 static unsigned int rmac_pause_time = 65535;
 static unsigned int mc_pause_threshold_q0q3 = 187;
 static unsigned int mc_pause_threshold_q4q7 = 187;
 static unsigned int shared_splits;
 static unsigned int tmac_util_period = 5;
 static unsigned int rmac_util_period = 5;
+static unsigned int bimodal = 0;
 #ifndef CONFIG_S2IO_NAPI
 static unsigned int indicate_max_pkts;
 #endif
+/* Frequency of Rx desc syncs expressed as power of 2 */
+static unsigned int rxsync_frequency = 3;
 
-/* 
+/*
  * S2IO device table.
- * This table lists all the devices that this driver supports. 
+ * This table lists all the devices that this driver supports.
  */
 static struct pci_device_id s2io_tbl[] __devinitdata = {
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_WIN,
@@ -247,9 +318,9 @@ static struct pci_device_id s2io_tbl[] __devinitdata = {
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_S2IO_UNI,
 	 PCI_ANY_ID, PCI_ANY_ID},
 	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_WIN,
-	 PCI_ANY_ID, PCI_ANY_ID},
-	{PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
-	 PCI_ANY_ID, PCI_ANY_ID},
+         PCI_ANY_ID, PCI_ANY_ID},
+        {PCI_VENDOR_ID_S2IO, PCI_DEVICE_ID_HERC_UNI,
+         PCI_ANY_ID, PCI_ANY_ID},
 	{0,}
 };
 
@@ -268,8 +339,8 @@ static struct pci_driver s2io_driver = {
 /**
  * init_shared_mem - Allocation and Initialization of Memory
  * @nic: Device private variable.
- * Description: The function allocates all the memory areas shared 
- * between the NIC and the driver. This includes Tx descriptors, 
+ * Description: The function allocates all the memory areas shared
+ * between the NIC and the driver. This includes Tx descriptors,
  * Rx descriptors and the statistics block.
  */
 
@@ -279,11 +350,11 @@ static int init_shared_mem(struct s2io_nic *nic)
 	void *tmp_v_addr, *tmp_v_addr_next;
 	dma_addr_t tmp_p_addr, tmp_p_addr_next;
 	RxD_block_t *pre_rxd_blk = NULL;
-	int i, j, blk_cnt;
+	int i, j, blk_cnt, rx_sz, tx_sz;
 	int lst_size, lst_per_page;
 	struct net_device *dev = nic->dev;
 #ifdef CONFIG_2BUFF_MODE
-	unsigned long tmp;
+	u64 tmp;
 	buffAdd_t *ba;
 #endif
 
@@ -300,36 +371,41 @@ static int init_shared_mem(struct s2io_nic *nic)
 		size += config->tx_cfg[i].fifo_len;
 	}
 	if (size > MAX_AVAILABLE_TXDS) {
-		DBG_PRINT(ERR_DBG, "%s: Total number of Tx FIFOs ",
-			  dev->name);
-		DBG_PRINT(ERR_DBG, "exceeds the maximum value ");
-		DBG_PRINT(ERR_DBG, "that can be used\n");
+		DBG_PRINT(ERR_DBG, "%s: Requested TxDs too high, ",
+			  __FUNCTION__);
+		DBG_PRINT(ERR_DBG, "Requested: %d, max supported: 8192\n", size);
 		return FAILURE;
 	}
 
 	lst_size = (sizeof(TxD_t) * config->max_txds);
+	tx_sz = lst_size * size;
 	lst_per_page = PAGE_SIZE / lst_size;
 
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		int fifo_len = config->tx_cfg[i].fifo_len;
 		int list_holder_size = fifo_len * sizeof(list_info_hold_t);
-		nic->list_info[i] = kmalloc(list_holder_size, GFP_KERNEL);
-		if (!nic->list_info[i]) {
+		mac_control->fifos[i].list_info = kmalloc(list_holder_size,
+							  GFP_KERNEL);
+		if (!mac_control->fifos[i].list_info) {
 			DBG_PRINT(ERR_DBG,
 				  "Malloc failed for list_info\n");
 			return -ENOMEM;
 		}
-		memset(nic->list_info[i], 0, list_holder_size);
+		memset(mac_control->fifos[i].list_info, 0, list_holder_size);
 	}
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		int page_num = TXD_MEM_PAGE_CNT(config->tx_cfg[i].fifo_len,
 						lst_per_page);
-		mac_control->tx_curr_put_info[i].offset = 0;
-		mac_control->tx_curr_put_info[i].fifo_len =
+		mac_control->fifos[i].tx_curr_put_info.offset = 0;
+		mac_control->fifos[i].tx_curr_put_info.fifo_len =
 		    config->tx_cfg[i].fifo_len - 1;
-		mac_control->tx_curr_get_info[i].offset = 0;
-		mac_control->tx_curr_get_info[i].fifo_len =
+		mac_control->fifos[i].tx_curr_get_info.offset = 0;
+		mac_control->fifos[i].tx_curr_get_info.fifo_len =
 		    config->tx_cfg[i].fifo_len - 1;
+		mac_control->fifos[i].fifo_no = i;
+		mac_control->fifos[i].nic = nic;
+		mac_control->fifos[i].max_txds = MAX_SKB_FRAGS;
+
 		for (j = 0; j < page_num; j++) {
 			int k = 0;
 			dma_addr_t tmp_p;
@@ -345,16 +421,15 @@ static int init_shared_mem(struct s2io_nic *nic)
 			while (k < lst_per_page) {
 				int l = (j * lst_per_page) + k;
 				if (l == config->tx_cfg[i].fifo_len)
-					goto end_txd_alloc;
-				nic->list_info[i][l].list_virt_addr =
+					break;
+				mac_control->fifos[i].list_info[l].list_virt_addr =
 				    tmp_v + (k * lst_size);
-				nic->list_info[i][l].list_phy_addr =
+				mac_control->fifos[i].list_info[l].list_phy_addr =
 				    tmp_p + (k * lst_size);
 				k++;
 			}
 		}
 	}
-      end_txd_alloc:
 
 	/* Allocation and initialization of RXDs in Rings */
 	size = 0;
@@ -367,21 +442,26 @@ static int init_shared_mem(struct s2io_nic *nic)
 			return FAILURE;
 		}
 		size += config->rx_cfg[i].num_rxd;
-		nic->block_count[i] =
+		mac_control->rings[i].block_count =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		nic->pkt_cnt[i] =
-		    config->rx_cfg[i].num_rxd - nic->block_count[i];
+		mac_control->rings[i].pkt_cnt =
+		    config->rx_cfg[i].num_rxd - mac_control->rings[i].block_count;
 	}
+	size = (size * (sizeof(RxD_t)));
+	rx_sz = size;
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		mac_control->rx_curr_get_info[i].block_index = 0;
-		mac_control->rx_curr_get_info[i].offset = 0;
-		mac_control->rx_curr_get_info[i].ring_len =
+		mac_control->rings[i].rx_curr_get_info.block_index = 0;
+		mac_control->rings[i].rx_curr_get_info.offset = 0;
+		mac_control->rings[i].rx_curr_get_info.ring_len =
 		    config->rx_cfg[i].num_rxd - 1;
-		mac_control->rx_curr_put_info[i].block_index = 0;
-		mac_control->rx_curr_put_info[i].offset = 0;
-		mac_control->rx_curr_put_info[i].ring_len =
+		mac_control->rings[i].rx_curr_put_info.block_index = 0;
+		mac_control->rings[i].rx_curr_put_info.offset = 0;
+		mac_control->rings[i].rx_curr_put_info.ring_len =
 		    config->rx_cfg[i].num_rxd - 1;
+		mac_control->rings[i].nic = nic;
+		mac_control->rings[i].ring_no = i;
+
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
 		/*  Allocating all the Rx blocks */
@@ -395,32 +475,36 @@ static int init_shared_mem(struct s2io_nic *nic)
 							  &tmp_p_addr);
 			if (tmp_v_addr == NULL) {
 				/*
-				 * In case of failure, free_shared_mem() 
-				 * is called, which should free any 
-				 * memory that was alloced till the 
+				 * In case of failure, free_shared_mem()
+				 * is called, which should free any
+				 * memory that was alloced till the
 				 * failure happened.
 				 */
-				nic->rx_blocks[i][j].block_virt_addr =
+				mac_control->rings[i].rx_blocks[j].block_virt_addr =
 				    tmp_v_addr;
 				return -ENOMEM;
 			}
 			memset(tmp_v_addr, 0, size);
-			nic->rx_blocks[i][j].block_virt_addr = tmp_v_addr;
-			nic->rx_blocks[i][j].block_dma_addr = tmp_p_addr;
+			mac_control->rings[i].rx_blocks[j].block_virt_addr =
+				tmp_v_addr;
+			mac_control->rings[i].rx_blocks[j].block_dma_addr =
+				tmp_p_addr;
 		}
 		/* Interlinking all Rx Blocks */
 		for (j = 0; j < blk_cnt; j++) {
-			tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
+			tmp_v_addr =
+				mac_control->rings[i].rx_blocks[j].block_virt_addr;
 			tmp_v_addr_next =
-			    nic->rx_blocks[i][(j + 1) %
+				mac_control->rings[i].rx_blocks[(j + 1) %
 					      blk_cnt].block_virt_addr;
-			tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+			tmp_p_addr =
+				mac_control->rings[i].rx_blocks[j].block_dma_addr;
 			tmp_p_addr_next =
-			    nic->rx_blocks[i][(j + 1) %
+				mac_control->rings[i].rx_blocks[(j + 1) %
 					      blk_cnt].block_dma_addr;
 
 			pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
-			pre_rxd_blk->reserved_1 = END_OF_BLOCK;	/* last RxD 
+			pre_rxd_blk->reserved_1 = END_OF_BLOCK;	/* last RxD
 								 * marker.
 								 */
 #ifndef	CONFIG_2BUFF_MODE
@@ -433,43 +517,43 @@ static int init_shared_mem(struct s2io_nic *nic)
 	}
 
 #ifdef CONFIG_2BUFF_MODE
-	/* 
+	/*
 	 * Allocation of Storages for buffer addresses in 2BUFF mode
 	 * and the buffers as well.
 	 */
 	for (i = 0; i < config->rx_ring_num; i++) {
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		nic->ba[i] = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+		mac_control->rings[i].ba = kmalloc((sizeof(buffAdd_t *) * blk_cnt),
 				     GFP_KERNEL);
-		if (!nic->ba[i])
+		if (!mac_control->rings[i].ba)
 			return -ENOMEM;
 		for (j = 0; j < blk_cnt; j++) {
 			int k = 0;
-			nic->ba[i][j] = kmalloc((sizeof(buffAdd_t) *
+			mac_control->rings[i].ba[j] = kmalloc((sizeof(buffAdd_t) *
 						 (MAX_RXDS_PER_BLOCK + 1)),
 						GFP_KERNEL);
-			if (!nic->ba[i][j])
+			if (!mac_control->rings[i].ba[j])
 				return -ENOMEM;
 			while (k != MAX_RXDS_PER_BLOCK) {
-				ba = &nic->ba[i][j][k];
+				ba = &mac_control->rings[i].ba[j][k];
 
-				ba->ba_0_org = kmalloc
+				ba->ba_0_org = (void *) kmalloc
 				    (BUF0_LEN + ALIGN_SIZE, GFP_KERNEL);
 				if (!ba->ba_0_org)
 					return -ENOMEM;
-				tmp = (unsigned long) ba->ba_0_org;
+				tmp = (u64) ba->ba_0_org;
 				tmp += ALIGN_SIZE;
-				tmp &= ~((unsigned long) ALIGN_SIZE);
+				tmp &= ~((u64) ALIGN_SIZE);
 				ba->ba_0 = (void *) tmp;
 
-				ba->ba_1_org = kmalloc
+				ba->ba_1_org = (void *) kmalloc
 				    (BUF1_LEN + ALIGN_SIZE, GFP_KERNEL);
 				if (!ba->ba_1_org)
 					return -ENOMEM;
-				tmp = (unsigned long) ba->ba_1_org;
+				tmp = (u64) ba->ba_1_org;
 				tmp += ALIGN_SIZE;
-				tmp &= ~((unsigned long) ALIGN_SIZE);
+				tmp &= ~((u64) ALIGN_SIZE);
 				ba->ba_1 = (void *) tmp;
 				k++;
 			}
@@ -483,9 +567,9 @@ static int init_shared_mem(struct s2io_nic *nic)
 	    (nic->pdev, size, &mac_control->stats_mem_phy);
 
 	if (!mac_control->stats_mem) {
-		/* 
-		 * In case of failure, free_shared_mem() is called, which 
-		 * should free any memory that was alloced till the 
+		/*
+		 * In case of failure, free_shared_mem() is called, which
+		 * should free any memory that was alloced till the
 		 * failure happened.
 		 */
 		return -ENOMEM;
@@ -495,15 +579,14 @@ static int init_shared_mem(struct s2io_nic *nic)
 	tmp_v_addr = mac_control->stats_mem;
 	mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
 	memset(tmp_v_addr, 0, size);
-
 	DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
 		  (unsigned long long) tmp_p_addr);
 
 	return SUCCESS;
 }
 
-/**  
- * free_shared_mem - Free the allocated Memory 
+/**
+ * free_shared_mem - Free the allocated Memory
  * @nic:  Device private variable.
  * Description: This function is to free all memory locations allocated by
  * the init_shared_mem() function and return it to the kernel.
@@ -533,15 +616,19 @@ static void free_shared_mem(struct s2io_nic *nic)
 						lst_per_page);
 		for (j = 0; j < page_num; j++) {
 			int mem_blks = (j * lst_per_page);
-			if (!nic->list_info[i][mem_blks].list_virt_addr)
+			if ((!mac_control->fifos[i].list_info) ||
+				(!mac_control->fifos[i].list_info[mem_blks].
+				 list_virt_addr))
 				break;
 			pci_free_consistent(nic->pdev, PAGE_SIZE,
-					    nic->list_info[i][mem_blks].
+					    mac_control->fifos[i].
+					    list_info[mem_blks].
 					    list_virt_addr,
-					    nic->list_info[i][mem_blks].
+					    mac_control->fifos[i].
+					    list_info[mem_blks].
 					    list_phy_addr);
 		}
-		kfree(nic->list_info[i]);
+		kfree(mac_control->fifos[i].list_info);
 	}
 
 #ifndef CONFIG_2BUFF_MODE
@@ -550,10 +637,12 @@ static void free_shared_mem(struct s2io_nic *nic)
 	size = SIZE_OF_BLOCK;
 #endif
 	for (i = 0; i < config->rx_ring_num; i++) {
-		blk_cnt = nic->block_count[i];
+		blk_cnt = mac_control->rings[i].block_count;
 		for (j = 0; j < blk_cnt; j++) {
-			tmp_v_addr = nic->rx_blocks[i][j].block_virt_addr;
-			tmp_p_addr = nic->rx_blocks[i][j].block_dma_addr;
+			tmp_v_addr = mac_control->rings[i].rx_blocks[j].
+				block_virt_addr;
+			tmp_p_addr = mac_control->rings[i].rx_blocks[j].
+				block_dma_addr;
 			if (tmp_v_addr == NULL)
 				break;
 			pci_free_consistent(nic->pdev, size,
@@ -566,35 +655,21 @@ static void free_shared_mem(struct s2io_nic *nic)
 	for (i = 0; i < config->rx_ring_num; i++) {
 		blk_cnt =
 		    config->rx_cfg[i].num_rxd / (MAX_RXDS_PER_BLOCK + 1);
-		if (!nic->ba[i])
-			goto end_free;
 		for (j = 0; j < blk_cnt; j++) {
 			int k = 0;
-			if (!nic->ba[i][j]) {
-				kfree(nic->ba[i]);
-				goto end_free;
-			}
+			if (!mac_control->rings[i].ba[j])
+				continue;
 			while (k != MAX_RXDS_PER_BLOCK) {
-				buffAdd_t *ba = &nic->ba[i][j][k];
-				if (!ba || !ba->ba_0_org || !ba->ba_1_org)
-				{
-					kfree(nic->ba[i]);
-					kfree(nic->ba[i][j]);
-					if(ba->ba_0_org)
-						kfree(ba->ba_0_org);
-					if(ba->ba_1_org)
-						kfree(ba->ba_1_org);
-					goto end_free;
-				}
+				buffAdd_t *ba = &mac_control->rings[i].ba[j][k];
 				kfree(ba->ba_0_org);
 				kfree(ba->ba_1_org);
 				k++;
 			}
-			kfree(nic->ba[i][j]);
+			kfree(mac_control->rings[i].ba[j]);
 		}
-		kfree(nic->ba[i]);
+		if (mac_control->rings[i].ba)
+			kfree(mac_control->rings[i].ba);
 	}
-end_free:
 #endif
 
 	if (mac_control->stats_mem) {
@@ -605,12 +680,93 @@ end_free:
 	}
 }
 
-/**  
- *  init_nic - Initialization of hardware 
+/**
+ * s2io_verify_pci_mode -
+ */
+
+static int s2io_verify_pci_mode(nic_t *nic)
+{
+	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	register u64 val64 = 0;
+	int     mode;
+
+	val64 = readq(&bar0->pci_mode);
+	mode = (u8)GET_PCI_MODE(val64);
+
+	if ( val64 & PCI_MODE_UNKNOWN_MODE)
+		return -1;      /* Unknown PCI mode */
+	return mode;
+}
+
+
+/**
+ * s2io_print_pci_mode -
+ */
+static int s2io_print_pci_mode(nic_t *nic)
+{
+	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	register u64 val64 = 0;
+	int	mode;
+	struct config_param *config = &nic->config;
+
+	val64 = readq(&bar0->pci_mode);
+	mode = (u8)GET_PCI_MODE(val64);
+
+	if ( val64 & PCI_MODE_UNKNOWN_MODE)
+		return -1;	/* Unknown PCI mode */
+
+	if (val64 & PCI_MODE_32_BITS) {
+		DBG_PRINT(ERR_DBG, "%s: Device is on 32 bit ", nic->dev->name);
+	} else {
+		DBG_PRINT(ERR_DBG, "%s: Device is on 64 bit ", nic->dev->name);
+	}
+
+	switch(mode) {
+		case PCI_MODE_PCI_33:
+			DBG_PRINT(ERR_DBG, "33MHz PCI bus\n");
+			config->bus_speed = 33;
+			break;
+		case PCI_MODE_PCI_66:
+			DBG_PRINT(ERR_DBG, "66MHz PCI bus\n");
+			config->bus_speed = 133;
+			break;
+		case PCI_MODE_PCIX_M1_66:
+			DBG_PRINT(ERR_DBG, "66MHz PCIX(M1) bus\n");
+			config->bus_speed = 133; /* Herc doubles the clock rate */
+			break;
+		case PCI_MODE_PCIX_M1_100:
+			DBG_PRINT(ERR_DBG, "100MHz PCIX(M1) bus\n");
+			config->bus_speed = 200;
+			break;
+		case PCI_MODE_PCIX_M1_133:
+			DBG_PRINT(ERR_DBG, "133MHz PCIX(M1) bus\n");
+			config->bus_speed = 266;
+			break;
+		case PCI_MODE_PCIX_M2_66:
+			DBG_PRINT(ERR_DBG, "133MHz PCIX(M2) bus\n");
+			config->bus_speed = 133;
+			break;
+		case PCI_MODE_PCIX_M2_100:
+			DBG_PRINT(ERR_DBG, "200MHz PCIX(M2) bus\n");
+			config->bus_speed = 200;
+			break;
+		case PCI_MODE_PCIX_M2_133:
+			DBG_PRINT(ERR_DBG, "266MHz PCIX(M2) bus\n");
+			config->bus_speed = 266;
+			break;
+		default:
+			return -1;	/* Unsupported bus speed */
+	}
+
+	return mode;
+}
+
+/**
+ *  init_nic - Initialization of hardware
  *  @nic: device peivate variable
- *  Description: The function sequentially configures every block 
- *  of the H/W from their reset values. 
- *  Return Value:  SUCCESS on success and 
+ *  Description: The function sequentially configures every block
+ *  of the H/W from their reset values.
+ *  Return Value:  SUCCESS on success and
  *  '-1' on failure (endian settings incorrect).
  */
 
@@ -626,21 +782,32 @@ static int init_nic(struct s2io_nic *nic)
 	struct config_param *config;
 	int mdio_cnt = 0, dtx_cnt = 0;
 	unsigned long long mem_share;
+	int mem_size;
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
 
-	/* Initialize swapper control register */
-	if (s2io_set_swapper(nic)) {
+	/* to set the swapper controle on the card */
+	if(s2io_set_swapper(nic)) {
 		DBG_PRINT(ERR_DBG,"ERROR: Setting Swapper failed\n");
 		return -1;
 	}
 
+	/*
+	 * Herc requires EOI to be removed from reset before XGXS, so..
+	 */
+	if (nic->device_type & XFRAME_II_DEVICE) {
+		val64 = 0xA500000000ULL;
+		writeq(val64, &bar0->sw_reset);
+		msleep(500);
+		val64 = readq(&bar0->sw_reset);
+	}
+
 	/* Remove XGXS from reset state */
 	val64 = 0;
 	writeq(val64, &bar0->sw_reset);
-	val64 = readq(&bar0->sw_reset);
 	msleep(500);
+	val64 = readq(&bar0->sw_reset);
 
 	/*  Enable Receiving broadcasts */
 	add = &bar0->mac_cfg;
@@ -660,48 +827,58 @@ static int init_nic(struct s2io_nic *nic)
 	val64 = dev->mtu;
 	writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
 
-	/* 
-	 * Configuring the XAUI Interface of Xena. 
+	/*
+	 * Configuring the XAUI Interface of Xena.
 	 * ***************************************
-	 * To Configure the Xena's XAUI, one has to write a series 
-	 * of 64 bit values into two registers in a particular 
-	 * sequence. Hence a macro 'SWITCH_SIGN' has been defined 
-	 * which will be defined in the array of configuration values 
-	 * (default_dtx_cfg & default_mdio_cfg) at appropriate places 
-	 * to switch writing from one regsiter to another. We continue 
+	 * To Configure the Xena's XAUI, one has to write a series
+	 * of 64 bit values into two registers in a particular
+	 * sequence. Hence a macro 'SWITCH_SIGN' has been defined
+	 * which will be defined in the array of configuration values
+	 * (xena_dtx_cfg & xena_mdio_cfg) at appropriate places
+	 * to switch writing from one regsiter to another. We continue
 	 * writing these values until we encounter the 'END_SIGN' macro.
-	 * For example, After making a series of 21 writes into 
-	 * dtx_control register the 'SWITCH_SIGN' appears and hence we 
+	 * For example, After making a series of 21 writes into
+	 * dtx_control register the 'SWITCH_SIGN' appears and hence we
 	 * start writing into mdio_control until we encounter END_SIGN.
 	 */
-	while (1) {
-	      dtx_cfg:
-		while (default_dtx_cfg[dtx_cnt] != END_SIGN) {
-			if (default_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
-				dtx_cnt++;
-				goto mdio_cfg;
-			}
-			SPECIAL_REG_WRITE(default_dtx_cfg[dtx_cnt],
+	if (nic->device_type & XFRAME_II_DEVICE) {
+		while (herc_act_dtx_cfg[dtx_cnt] != END_SIGN) {
+			SPECIAL_REG_WRITE(herc_act_dtx_cfg[dtx_cnt],
 					  &bar0->dtx_control, UF);
-			val64 = readq(&bar0->dtx_control);
+			if (dtx_cnt & 0x1)
+				msleep(1); /* Necessary!! */
 			dtx_cnt++;
 		}
-	      mdio_cfg:
-		while (default_mdio_cfg[mdio_cnt] != END_SIGN) {
-			if (default_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+	} else {
+		while (1) {
+		      dtx_cfg:
+			while (xena_dtx_cfg[dtx_cnt] != END_SIGN) {
+				if (xena_dtx_cfg[dtx_cnt] == SWITCH_SIGN) {
+					dtx_cnt++;
+					goto mdio_cfg;
+				}
+				SPECIAL_REG_WRITE(xena_dtx_cfg[dtx_cnt],
+						  &bar0->dtx_control, UF);
+				val64 = readq(&bar0->dtx_control);
+				dtx_cnt++;
+			}
+		      mdio_cfg:
+			while (xena_mdio_cfg[mdio_cnt] != END_SIGN) {
+				if (xena_mdio_cfg[mdio_cnt] == SWITCH_SIGN) {
+					mdio_cnt++;
+					goto dtx_cfg;
+				}
+				SPECIAL_REG_WRITE(xena_mdio_cfg[mdio_cnt],
+						  &bar0->mdio_control, UF);
+				val64 = readq(&bar0->mdio_control);
 				mdio_cnt++;
+			}
+			if ((xena_dtx_cfg[dtx_cnt] == END_SIGN) &&
+			    (xena_mdio_cfg[mdio_cnt] == END_SIGN)) {
+				break;
+			} else {
 				goto dtx_cfg;
 			}
-			SPECIAL_REG_WRITE(default_mdio_cfg[mdio_cnt],
-					  &bar0->mdio_control, UF);
-			val64 = readq(&bar0->mdio_control);
-			mdio_cnt++;
-		}
-		if ((default_dtx_cfg[dtx_cnt] == END_SIGN) &&
-		    (default_mdio_cfg[mdio_cnt] == END_SIGN)) {
-			break;
-		} else {
-			goto dtx_cfg;
 		}
 	}
 
@@ -748,12 +925,20 @@ static int init_nic(struct s2io_nic *nic)
 	val64 |= BIT(0);	/* To enable the FIFO partition. */
 	writeq(val64, &bar0->tx_fifo_partition_0);
 
+	/*
+	 * Disable 4 PCCs for Xena1, 2 and 3 as per H/W bug
+	 * SXE-008 TRANSMIT DMA ARBITRATION ISSUE.
+	 */
+	if ((nic->device_type == XFRAME_I_DEVICE) &&
+		(get_xena_rev_id(nic->pdev) < 4))
+		writeq(PCC_ENABLE_FOUR, &bar0->pcc_enable);
+
 	val64 = readq(&bar0->tx_fifo_partition_0);
 	DBG_PRINT(INIT_DBG, "Fifo partition at: 0x%p is: 0x%llx\n",
 		  &bar0->tx_fifo_partition_0, (unsigned long long) val64);
 
-	/* 
-	 * Initialization of Tx_PA_CONFIG register to ignore packet 
+	/*
+	 * Initialization of Tx_PA_CONFIG register to ignore packet
 	 * integrity checking.
 	 */
 	val64 = readq(&bar0->tx_pa_cfg);
@@ -770,85 +955,304 @@ static int init_nic(struct s2io_nic *nic)
 	}
 	writeq(val64, &bar0->rx_queue_priority);
 
-	/* 
-	 * Allocating equal share of memory to all the 
+	/*
+	 * Allocating equal share of memory to all the
 	 * configured Rings.
 	 */
 	val64 = 0;
+	if (nic->device_type & XFRAME_II_DEVICE)
+		mem_size = 32;
+	else
+		mem_size = 64;
+
 	for (i = 0; i < config->rx_ring_num; i++) {
 		switch (i) {
 		case 0:
-			mem_share = (64 / config->rx_ring_num +
-				     64 % config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num +
+				     mem_size % config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q0_SZ(mem_share);
 			continue;
 		case 1:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q1_SZ(mem_share);
 			continue;
 		case 2:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q2_SZ(mem_share);
 			continue;
 		case 3:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q3_SZ(mem_share);
 			continue;
 		case 4:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q4_SZ(mem_share);
 			continue;
 		case 5:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q5_SZ(mem_share);
 			continue;
 		case 6:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q6_SZ(mem_share);
 			continue;
 		case 7:
-			mem_share = (64 / config->rx_ring_num);
+			mem_share = (mem_size / config->rx_ring_num);
 			val64 |= RX_QUEUE_CFG_Q7_SZ(mem_share);
 			continue;
 		}
 	}
 	writeq(val64, &bar0->rx_queue_cfg);
 
-	/* 
-	 * Initializing the Tx round robin registers to 0.
-	 * Filling Tx and Rx round robin registers as per the 
-	 * number of FIFOs and Rings is still TODO.
-	 */
-	writeq(0, &bar0->tx_w_round_robin_0);
-	writeq(0, &bar0->tx_w_round_robin_1);
-	writeq(0, &bar0->tx_w_round_robin_2);
-	writeq(0, &bar0->tx_w_round_robin_3);
-	writeq(0, &bar0->tx_w_round_robin_4);
-
-	/* 
-	 * TODO
-	 * Disable Rx steering. Hard coding all packets be steered to
-	 * Queue 0 for now. 
+	/*
+	 * Filling Tx round robin registers
+	 * as per the number of FIFOs
 	 */
-	val64 = 0x8080808080808080ULL;
-	writeq(val64, &bar0->rts_qos_steering);
+	switch (config->tx_fifo_num) {
+	case 1:
+		val64 = 0x0000000000000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 2:
+		val64 = 0x0000010000010000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0100000100000100ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0001000001000001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0000010000010000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0100000000000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 3:
+		val64 = 0x0001000102000001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0001020000010001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0200000100010200ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0001000102000001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0001020000000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 4:
+		val64 = 0x0001020300010200ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0100000102030001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0200010000010203ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0001020001000001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0203000100000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 5:
+		val64 = 0x0001000203000102ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0001020001030004ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0001000203000102ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0001020001030004ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0001000000000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 6:
+		val64 = 0x0001020304000102ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0304050001020001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0203000100000102ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0304000102030405ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0001000200000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 7:
+		val64 = 0x0001020001020300ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0102030400010203ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0405060001020001ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0304050000010200ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0102030000000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	case 8:
+		val64 = 0x0001020300040105ULL;
+		writeq(val64, &bar0->tx_w_round_robin_0);
+		val64 = 0x0200030106000204ULL;
+		writeq(val64, &bar0->tx_w_round_robin_1);
+		val64 = 0x0103000502010007ULL;
+		writeq(val64, &bar0->tx_w_round_robin_2);
+		val64 = 0x0304010002060500ULL;
+		writeq(val64, &bar0->tx_w_round_robin_3);
+		val64 = 0x0103020400000000ULL;
+		writeq(val64, &bar0->tx_w_round_robin_4);
+		break;
+	}
+
+	/* Filling the Rx round robin registers as per the
+	 * number of Rings and steering based on QoS.
+         */
+	switch (config->rx_ring_num) {
+	case 1:
+		val64 = 0x8080808080808080ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 2:
+		val64 = 0x0000010000010000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0100000100000100ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0001000001000001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0000010000010000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0100000000000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080808040404040ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 3:
+		val64 = 0x0001000102000001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0001020000010001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0200000100010200ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0001000102000001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0001020000000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080804040402020ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 4:
+		val64 = 0x0001020300010200ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0100000102030001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0200010000010203ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0001020001000001ULL;	
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0203000100000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080404020201010ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 5:
+		val64 = 0x0001000203000102ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0001020001030004ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0001000203000102ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0001020001030004ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0001000000000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080404020201008ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 6:
+		val64 = 0x0001020304000102ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0304050001020001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0203000100000102ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0304000102030405ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0001000200000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080404020100804ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 7:
+		val64 = 0x0001020001020300ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0102030400010203ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0405060001020001ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0304050000010200ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0102030000000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8080402010080402ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	case 8:
+		val64 = 0x0001020300040105ULL;
+		writeq(val64, &bar0->rx_w_round_robin_0);
+		val64 = 0x0200030106000204ULL;
+		writeq(val64, &bar0->rx_w_round_robin_1);
+		val64 = 0x0103000502010007ULL;
+		writeq(val64, &bar0->rx_w_round_robin_2);
+		val64 = 0x0304010002060500ULL;
+		writeq(val64, &bar0->rx_w_round_robin_3);
+		val64 = 0x0103020400000000ULL;
+		writeq(val64, &bar0->rx_w_round_robin_4);
+
+		val64 = 0x8040201008040201ULL;
+		writeq(val64, &bar0->rts_qos_steering);
+		break;
+	}
 
 	/* UDP Fix */
 	val64 = 0;
-	for (i = 1; i < 8; i++)
+	for (i = 0; i < 8; i++)
+		writeq(val64, &bar0->rts_frm_len_n[i]);
+
+	/* Set the default rts frame length for the rings configured */
+	val64 = MAC_RTS_FRM_LEN_SET(dev->mtu+22);
+	for (i = 0 ; i < config->rx_ring_num ; i++)
 		writeq(val64, &bar0->rts_frm_len_n[i]);
 
-	/* Set rts_frm_len register for fifo 0 */
-	writeq(MAC_RTS_FRM_LEN_SET(dev->mtu + 22),
-	       &bar0->rts_frm_len_n[0]);
+	/* Set the frame length for the configured rings
+	 * desired by the user
+	 */
+	for (i = 0; i < config->rx_ring_num; i++) {
+		/* If rts_frm_len[i] == 0 then it is assumed that user not
+		 * specified frame length steering.
+		 * If the user provides the frame length then program
+		 * the rts_frm_len register for those values or else
+		 * leave it as it is.
+		 */
+		if (rts_frm_len[i] != 0) {
+			writeq(MAC_RTS_FRM_LEN_SET(rts_frm_len[i]),
+				&bar0->rts_frm_len_n[i]);
+		}
+	}
 
-	/* Enable statistics */
+	/* Program statistics memory */
 	writeq(mac_control->stats_mem_phy, &bar0->stat_addr);
-	val64 = SET_UPDT_PERIOD(Stats_refresh_time) |
-	    STAT_CFG_STAT_RO | STAT_CFG_STAT_EN;
-	writeq(val64, &bar0->stat_cfg);
 
-	/* 
+	if (nic->device_type == XFRAME_II_DEVICE) {
+		val64 = STAT_BC(0x320);
+		writeq(val64, &bar0->stat_byte_cnt);
+	}
+
+	/*
 	 * Initializing the sampling rate for the device to calculate the
 	 * bandwidth utilization.
 	 */
@@ -857,30 +1261,38 @@ static int init_nic(struct s2io_nic *nic)
 	writeq(val64, &bar0->mac_link_util);
 
 
-	/* 
-	 * Initializing the Transmit and Receive Traffic Interrupt 
+	/*
+	 * Initializing the Transmit and Receive Traffic Interrupt
 	 * Scheme.
 	 */
-	/* TTI Initialization. Default Tx timer gets us about
+	/*
+	 * TTI Initialization. Default Tx timer gets us about
 	 * 250 interrupts per sec. Continuous interrupts are enabled
 	 * by default.
 	 */
-	val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078) |
-	    TTI_DATA1_MEM_TX_URNG_A(0xA) |
+	if (nic->device_type == XFRAME_II_DEVICE) {
+		int count = (nic->config.bus_speed * 125)/2;
+		val64 = TTI_DATA1_MEM_TX_TIMER_VAL(count);
+	} else {
+
+		val64 = TTI_DATA1_MEM_TX_TIMER_VAL(0x2078);
+	}
+	val64 |= TTI_DATA1_MEM_TX_URNG_A(0xA) |
 	    TTI_DATA1_MEM_TX_URNG_B(0x10) |
-	    TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN |
-		TTI_DATA1_MEM_TX_TIMER_CI_EN;
+	    TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN;
+		if (use_continuous_tx_intrs)
+			val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN;
 	writeq(val64, &bar0->tti_data1_mem);
 
 	val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
 	    TTI_DATA2_MEM_TX_UFC_B(0x20) |
-	    TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
+	    TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
 	writeq(val64, &bar0->tti_data2_mem);
 
 	val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
 	writeq(val64, &bar0->tti_command_mem);
 
-	/* 
+	/*
 	 * Once the operation completes, the Strobe bit of the command
 	 * register will be reset. We poll for this particular condition
 	 * We wait for a maximum of 500ms for the operation to complete,
@@ -901,52 +1313,97 @@ static int init_nic(struct s2io_nic *nic)
 		time++;
 	}
 
-	/* RTI Initialization */
-	val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF) |
-	    RTI_DATA1_MEM_RX_URNG_A(0xA) |
-	    RTI_DATA1_MEM_RX_URNG_B(0x10) |
-	    RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
+	if (nic->config.bimodal) {
+		int k = 0;
+		for (k = 0; k < config->rx_ring_num; k++) {
+			val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
+			val64 |= TTI_CMD_MEM_OFFSET(0x38+k);
+			writeq(val64, &bar0->tti_command_mem);
+
+		/*
+		 * Once the operation completes, the Strobe bit of the command
+		 * register will be reset. We poll for this particular condition
+		 * We wait for a maximum of 500ms for the operation to complete,
+		 * if it's not complete by then we return error.
+		*/
+			time = 0;
+			while (TRUE) {
+				val64 = readq(&bar0->tti_command_mem);
+				if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
+					break;
+				}
+				if (time > 10) {
+					DBG_PRINT(ERR_DBG,
+						"%s: TTI init Failed\n",
+					dev->name);
+					return -1;
+				}
+				time++;
+				msleep(50);
+			}
+		}
+	} else {
 
-	writeq(val64, &bar0->rti_data1_mem);
+		/* RTI Initialization */
+		if (nic->device_type == XFRAME_II_DEVICE) {
+			/*
+			 * Programmed to generate Apprx 500 Intrs per
+			 * second
+			 */
+			int count = (nic->config.bus_speed * 125)/4;
+			val64 = RTI_DATA1_MEM_RX_TIMER_VAL(count);
+		} else {
+			val64 = RTI_DATA1_MEM_RX_TIMER_VAL(0xFFF);
+		}
+		val64 |= RTI_DATA1_MEM_RX_URNG_A(0xA) |
+		    RTI_DATA1_MEM_RX_URNG_B(0x10) |
+		    RTI_DATA1_MEM_RX_URNG_C(0x30) | RTI_DATA1_MEM_RX_TIMER_AC_EN;
 
-	val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
-	    RTI_DATA2_MEM_RX_UFC_B(0x2) |
-	    RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
-	writeq(val64, &bar0->rti_data2_mem);
+		writeq(val64, &bar0->rti_data1_mem);
 
-	val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD;
-	writeq(val64, &bar0->rti_command_mem);
+		val64 = RTI_DATA2_MEM_RX_UFC_A(0x1) |
+		    RTI_DATA2_MEM_RX_UFC_B(0x2) |
+		    RTI_DATA2_MEM_RX_UFC_C(0x40) | RTI_DATA2_MEM_RX_UFC_D(0x80);
+		writeq(val64, &bar0->rti_data2_mem);
 
-	/* 
-	 * Once the operation completes, the Strobe bit of the command
-	 * register will be reset. We poll for this particular condition
-	 * We wait for a maximum of 500ms for the operation to complete,
-	 * if it's not complete by then we return error.
-	 */
-	time = 0;
-	while (TRUE) {
-		val64 = readq(&bar0->rti_command_mem);
-		if (!(val64 & TTI_CMD_MEM_STROBE_NEW_CMD)) {
-			break;
-		}
-		if (time > 10) {
-			DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
-				  dev->name);
-			return -1;
+		for (i = 0; i < config->rx_ring_num; i++) {
+			val64 = RTI_CMD_MEM_WE | RTI_CMD_MEM_STROBE_NEW_CMD
+					| RTI_CMD_MEM_OFFSET(i);
+			writeq(val64, &bar0->rti_command_mem);
+
+			/*
+			 * Once the operation completes, the Strobe bit of the
+			 * command register will be reset. We poll for this
+			 * particular condition. We wait for a maximum of 500ms
+			 * for the operation to complete, if it's not complete
+			 * by then we return error.
+			 */
+			time = 0;
+			while (TRUE) {
+				val64 = readq(&bar0->rti_command_mem);
+				if (!(val64 & RTI_CMD_MEM_STROBE_NEW_CMD)) {
+					break;
+				}
+				if (time > 10) {
+					DBG_PRINT(ERR_DBG, "%s: RTI init Failed\n",
+						  dev->name);
+					return -1;
+				}
+				time++;
+				msleep(50);
+			}
 		}
-		time++;
-		msleep(50);
 	}
 
-	/* 
-	 * Initializing proper values as Pause threshold into all 
+	/*
+	 * Initializing proper values as Pause threshold into all
 	 * the 8 Queues on Rx side.
 	 */
 	writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q0q3);
 	writeq(0xffbbffbbffbbffbbULL, &bar0->mc_pause_thresh_q4q7);
 
 	/* Disable RMAC PAD STRIPPING */
-	add = &bar0->mac_cfg;
+	add = (void *) &bar0->mac_cfg;
 	val64 = readq(&bar0->mac_cfg);
 	val64 &= ~(MAC_CFG_RMAC_STRIP_PAD);
 	writeq(RMAC_CFG_KEY(0x4C0D), &bar0->rmac_cfg_key);
@@ -955,8 +1412,8 @@ static int init_nic(struct s2io_nic *nic)
 	writel((u32) (val64 >> 32), (add + 4));
 	val64 = readq(&bar0->mac_cfg);
 
-	/* 
-	 * Set the time value to be inserted in the pause frame 
+	/*
+	 * Set the time value to be inserted in the pause frame
 	 * generated by xena.
 	 */
 	val64 = readq(&bar0->rmac_pause_cfg);
@@ -964,7 +1421,7 @@ static int init_nic(struct s2io_nic *nic)
 	val64 |= RMAC_PAUSE_HG_PTIME(nic->mac_control.rmac_pause_time);
 	writeq(val64, &bar0->rmac_pause_cfg);
 
-	/* 
+	/*
 	 * Set the Threshold Limit for Generating the pause frame
 	 * If the amount of data in any Queue exceeds ratio of
 	 * (mac_control.mc_pause_threshold_q0q3 or q4q7)/256
@@ -988,25 +1445,54 @@ static int init_nic(struct s2io_nic *nic)
 	}
 	writeq(val64, &bar0->mc_pause_thresh_q4q7);
 
-	/* 
-	 * TxDMA will stop Read request if the number of read split has 
+	/*
+	 * TxDMA will stop Read request if the number of read split has
 	 * exceeded the limit pointed by shared_splits
 	 */
 	val64 = readq(&bar0->pic_control);
 	val64 |= PIC_CNTL_SHARED_SPLITS(shared_splits);
 	writeq(val64, &bar0->pic_control);
 
+	/*
+	 * Programming the Herc to split every write transaction
+	 * that does not start on an ADB to reduce disconnects.
+	 */
+	if (nic->device_type == XFRAME_II_DEVICE) {
+		val64 = WREQ_SPLIT_MASK_SET_MASK(255);
+		writeq(val64, &bar0->wreq_split_mask);
+	}
+
+	/* Setting Link stability period to 64 ms */ 
+	if (nic->device_type == XFRAME_II_DEVICE) {
+		val64 = MISC_LINK_STABILITY_PRD(3);
+		writeq(val64, &bar0->misc_control);
+	}
+
 	return SUCCESS;
 }
+#define LINK_UP_DOWN_INTERRUPT		1
+#define MAC_RMAC_ERR_TIMER		2
 
-/**  
- *  en_dis_able_nic_intrs - Enable or Disable the interrupts 
+#if defined(CONFIG_MSI_MODE) || defined(CONFIG_MSIX_MODE)
+#define s2io_link_fault_indication(x) MAC_RMAC_ERR_TIMER
+#else
+int s2io_link_fault_indication(nic_t *nic)
+{
+	if (nic->device_type == XFRAME_II_DEVICE)
+		return LINK_UP_DOWN_INTERRUPT;
+	else
+		return MAC_RMAC_ERR_TIMER;
+}
+#endif
+
+/**
+ *  en_dis_able_nic_intrs - Enable or Disable the interrupts
  *  @nic: device private variable,
  *  @mask: A mask indicating which Intr block must be modified and,
  *  @flag: A flag indicating whether to enable or disable the Intrs.
  *  Description: This function will either disable or enable the interrupts
- *  depending on the flag argument. The mask argument can be used to 
- *  enable/disable any Intr block. 
+ *  depending on the flag argument. The mask argument can be used to
+ *  enable/disable any Intr block.
  *  Return Value: NONE.
  */
 
@@ -1024,20 +1510,31 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/*  
-			 * Disabled all PCIX, Flash, MDIO, IIC and GPIO
-			 * interrupts for now. 
-			 * TODO 
+			/*
+			 * If Hercules adapter enable GPIO otherwise
+			 * disabled all PCIX, Flash, MDIO, IIC and GPIO
+			 * interrupts for now.
+			 * TODO
 			 */
-			writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
-			/* 
+			if (s2io_link_fault_indication(nic) ==
+					LINK_UP_DOWN_INTERRUPT ) {
+				temp64 = readq(&bar0->pic_int_mask);
+				temp64 &= ~((u64) PIC_INT_GPIO);
+				writeq(temp64, &bar0->pic_int_mask);
+				temp64 = readq(&bar0->gpio_int_mask);
+				temp64 &= ~((u64) GPIO_INT_MASK_LINK_UP);
+				writeq(temp64, &bar0->gpio_int_mask);
+			} else {
+				writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
+			}
+			/*
 			 * No MSI Support is available presently, so TTI and
 			 * RTI interrupts are also disabled.
 			 */
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable PIC Intrs in the general 
-			 * intr mask register 
+			/*
+			 * Disable PIC Intrs in the general
+			 * intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->pic_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1055,27 +1552,27 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * Keep all interrupts other than PFC interrupt 
+			/*
+			 * Keep all interrupts other than PFC interrupt
 			 * and PCC interrupt disabled in DMA level.
 			 */
 			val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
 						      TXDMA_PCC_INT_M);
 			writeq(val64, &bar0->txdma_int_mask);
-			/* 
-			 * Enable only the MISC error 1 interrupt in PFC block 
+			/*
+			 * Enable only the MISC error 1 interrupt in PFC block
 			 */
 			val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
 			writeq(val64, &bar0->pfc_err_mask);
-			/* 
-			 * Enable only the FB_ECC error interrupt in PCC block 
+			/*
+			 * Enable only the FB_ECC error interrupt in PCC block
 			 */
 			val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
 			writeq(val64, &bar0->pcc_err_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/* 
-			 * Disable TxDMA Intrs in the general intr mask 
-			 * register 
+			/*
+			 * Disable TxDMA Intrs in the general intr mask
+			 * register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
 			writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
@@ -1093,15 +1590,15 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All RxDMA block interrupts are disabled for now 
-			 * TODO 
+			/*
+			 * All RxDMA block interrupts are disabled for now
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable RxDMA Intrs in the general intr mask 
-			 * register 
+			/*
+			 * Disable RxDMA Intrs in the general intr mask
+			 * register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1118,22 +1615,13 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All MAC block error interrupts are disabled for now 
-			 * except the link status change interrupt.
+			/*
+			 * All MAC block error interrupts are disabled for now
 			 * TODO
 			 */
-			val64 = MAC_INT_STATUS_RMAC_INT;
-			temp64 = readq(&bar0->mac_int_mask);
-			temp64 &= ~((u64) val64);
-			writeq(temp64, &bar0->mac_int_mask);
-
-			val64 = readq(&bar0->mac_rmac_err_mask);
-			val64 &= ~((u64) RMAC_LINK_STATE_CHANGE_INT);
-			writeq(val64, &bar0->mac_rmac_err_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable MAC Intrs in the general intr mask register 
+			/*
+			 * Disable MAC Intrs in the general intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->mac_int_mask);
 			writeq(DISABLE_ALL_INTRS,
@@ -1152,14 +1640,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
+			/*
 			 * All XGXS block error interrupts are disabled for now
-			 * TODO 
+			 * TODO
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable MC Intrs in the general intr mask register 
+			/*
+			 * Disable MC Intrs in the general intr mask register
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
 			temp64 = readq(&bar0->general_int_mask);
@@ -1175,11 +1663,11 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
-			 * All MC block error interrupts are disabled for now
-			 * TODO 
+			/*
+			 * Enable all MC Intrs.
 			 */
-			writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
+			writeq(0x0, &bar0->mc_int_mask);
+			writeq(0x0, &bar0->mc_err_mask);
 		} else if (flag == DISABLE_INTRS) {
 			/*
 			 * Disable MC Intrs in the general intr mask register
@@ -1199,14 +1687,14 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			temp64 = readq(&bar0->general_int_mask);
 			temp64 &= ~((u64) val64);
 			writeq(temp64, &bar0->general_int_mask);
-			/* 
+			/*
 			 * Enable all the Tx side interrupts
-			 * writing 0 Enables all 64 TX interrupt levels 
+			 * writing 0 Enables all 64 TX interrupt levels
 			 */
 			writeq(0x0, &bar0->tx_traffic_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/* 
-			 * Disable Tx Traffic Intrs in the general intr mask 
+			/*
+			 * Disable Tx Traffic Intrs in the general intr mask
 			 * register.
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->tx_traffic_mask);
@@ -1226,8 +1714,8 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 			/* writing 0 Enables all 8 RX interrupt levels */
 			writeq(0x0, &bar0->rx_traffic_mask);
 		} else if (flag == DISABLE_INTRS) {
-			/*  
-			 * Disable Rx Traffic Intrs in the general intr mask 
+			/*
+			 * Disable Rx Traffic Intrs in the general intr mask
 			 * register.
 			 */
 			writeq(DISABLE_ALL_INTRS, &bar0->rx_traffic_mask);
@@ -1238,24 +1726,66 @@ static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
 	}
 }
 
-/**  
- *  verify_xena_quiescence - Checks whether the H/W is ready 
+static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc)
+{
+	int ret = 0;
+
+	if (flag == FALSE) {
+		if ((!herc && (rev_id >= 4)) || herc) {
+			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+			    ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+			     ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+				ret = 1;
+			}
+		}else {
+			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
+			    ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+			     ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+				ret = 1;
+			}
+		}
+	} else {
+		if ((!herc && (rev_id >= 4)) || herc) {
+			if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
+			     ADAPTER_STATUS_RMAC_PCC_IDLE) &&
+			    (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+			     ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+			      ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+				ret = 1;
+			}
+		} else {
+			if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
+			     ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
+			    (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
+			     ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+			      ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+				ret = 1;
+			}
+		}
+	}
+
+	return ret;
+}
+/**
+ *  verify_xena_quiescence - Checks whether the H/W is ready
  *  @val64 :  Value read from adapter status register.
  *  @flag : indicates if the adapter enable bit was ever written once
  *  before.
  *  Description: Returns whether the H/W is ready to go or not. Depending
- *  on whether adapter enable bit was written or not the comparison 
+ *  on whether adapter enable bit was written or not the comparison
  *  differs and the calling function passes the input argument flag to
  *  indicate this.
- *  Return: 1 If xena is quiescence 
+ *  Return: 1 If xena is quiescence
  *          0 If Xena is not quiescence
  */
 
-static int verify_xena_quiescence(u64 val64, int flag)
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
 {
-	int ret = 0;
+	int ret = 0, herc;
 	u64 tmp64 = ~((u64) val64);
+	int rev_id = get_xena_rev_id(sp->pdev);
 
+	herc = (sp->device_type == XFRAME_II_DEVICE);
 	if (!
 	    (tmp64 &
 	     (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
@@ -1263,25 +1793,7 @@ static int verify_xena_quiescence(u64 val64, int flag)
 	      ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
 	      ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
 	      ADAPTER_STATUS_P_PLL_LOCK))) {
-		if (flag == FALSE) {
-			if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
-			    ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
-			     ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
-
-				ret = 1;
-
-			}
-		} else {
-			if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
-			     ADAPTER_STATUS_RMAC_PCC_IDLE) &&
-			    (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
-			     ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
-			      ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
-
-				ret = 1;
-
-			}
-		}
+		ret = check_prc_pcc_state(val64, flag, rev_id, herc);
 	}
 
 	return ret;
@@ -1290,12 +1802,12 @@ static int verify_xena_quiescence(u64 val64, int flag)
 /**
  * fix_mac_address -  Fix for Mac addr problem on Alpha platforms
  * @sp: Pointer to device specifc structure
- * Description : 
+ * Description :
  * New procedure to clear mac address reading  problems on Alpha platforms
  *
  */
 
-static void fix_mac_address(nic_t * sp)
+void fix_mac_address(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64;
@@ -1303,20 +1815,21 @@ static void fix_mac_address(nic_t * sp)
 
 	while (fix_mac[i] != END_SIGN) {
 		writeq(fix_mac[i++], &bar0->gpio_control);
+		udelay(10);
 		val64 = readq(&bar0->gpio_control);
 	}
 }
 
 /**
- *  start_nic - Turns the device on   
+ *  start_nic - Turns the device on
  *  @nic : device private variable.
- *  Description: 
- *  This function actually turns the device on. Before this  function is 
- *  called,all Registers are configured from their reset states 
- *  and shared memory is allocated but the NIC is still quiescent. On 
+ *  Description:
+ *  This function actually turns the device on. Before this  function is
+ *  called,all Registers are configured from their reset states
+ *  and shared memory is allocated but the NIC is still quiescent. On
  *  calling this function, the device interrupts are cleared and the NIC is
  *  literally switched on by writing into the adapter control register.
- *  Return Value: 
+ *  Return Value:
  *  SUCCESS on success and -1 on failure.
  */
 
@@ -1325,8 +1838,8 @@ static int start_nic(struct s2io_nic *nic)
 	XENA_dev_config_t __iomem *bar0 = nic->bar0;
 	struct net_device *dev = nic->dev;
 	register u64 val64 = 0;
-	u16 interruptible, i;
-	u16 subid;
+	u16 interruptible;
+	u16 subid, i;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
@@ -1335,10 +1848,12 @@ static int start_nic(struct s2io_nic *nic)
 
 	/*  PRC Initialization and configuration */
 	for (i = 0; i < config->rx_ring_num; i++) {
-		writeq((u64) nic->rx_blocks[i][0].block_dma_addr,
+		writeq((u64) mac_control->rings[i].rx_blocks[0].block_dma_addr,
 		       &bar0->prc_rxd0_n[i]);
 
 		val64 = readq(&bar0->prc_ctrl_n[i]);
+		if (nic->config.bimodal)
+			val64 |= PRC_CTRL_BIMODAL_INTERRUPT;
 #ifndef CONFIG_2BUFF_MODE
 		val64 |= PRC_CTRL_RC_ENABLED;
 #else
@@ -1354,7 +1869,7 @@ static int start_nic(struct s2io_nic *nic)
 	writeq(val64, &bar0->rx_pa_cfg);
 #endif
 
-	/* 
+	/*
 	 * Enabling MC-RLDRAM. After enabling the device, we timeout
 	 * for around 100ms, which is approximately the time required
 	 * for the device to be ready for operation.
@@ -1364,27 +1879,27 @@ static int start_nic(struct s2io_nic *nic)
 	SPECIAL_REG_WRITE(val64, &bar0->mc_rldram_mrs, UF);
 	val64 = readq(&bar0->mc_rldram_mrs);
 
-	msleep(100);			/* Delay by around 100 ms. */
+	msleep(100);	/* Delay by around 100 ms. */
 
 	/* Enabling ECC Protection. */
 	val64 = readq(&bar0->adapter_control);
 	val64 &= ~ADAPTER_ECC_EN;
 	writeq(val64, &bar0->adapter_control);
 
-	/* 
-	 * Clearing any possible Link state change interrupts that 
+	/*
+	 * Clearing any possible Link state change interrupts that
 	 * could have popped up just before Enabling the card.
 	 */
 	val64 = readq(&bar0->mac_rmac_err_reg);
 	if (val64)
 		writeq(val64, &bar0->mac_rmac_err_reg);
 
-	/* 
-	 * Verify if the device is ready to be enabled, if so enable 
+	/*
+	 * Verify if the device is ready to be enabled, if so enable
 	 * it.
 	 */
 	val64 = readq(&bar0->adapter_status);
-	if (!verify_xena_quiescence(val64, nic->device_enabled_once)) {
+	if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
 		DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
 		DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
 			  (unsigned long long) val64);
@@ -1392,16 +1907,18 @@ static int start_nic(struct s2io_nic *nic)
 	}
 
 	/*  Enable select interrupts */
-	interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
-	    RX_MAC_INTR;
+	interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+	interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+	interruptible |= TX_MAC_INTR | RX_MAC_INTR;
+
 	en_dis_able_nic_intrs(nic, interruptible, ENABLE_INTRS);
 
-	/* 
+	/*
 	 * With some switches, link might be already up at this point.
-	 * Because of this weird behavior, when we enable laser, 
-	 * we may not get link. We need to handle this. We cannot 
-	 * figure out which switch is misbehaving. So we are forced to 
-	 * make a global change. 
+	 * Because of this weird behavior, when we enable laser,
+	 * we may not get link. We need to handle this. We cannot
+	 * figure out which switch is misbehaving. So we are forced to
+	 * make a global change.
 	 */
 
 	/* Enabling Laser. */
@@ -1411,44 +1928,30 @@ static int start_nic(struct s2io_nic *nic)
 
 	/* SXE-002: Initialize link and activity LED */
 	subid = nic->pdev->subsystem_device;
-	if ((subid & 0xFF) >= 0x07) {
+	if (((subid & 0xFF) >= 0x07) &&
+	    (nic->device_type == XFRAME_I_DEVICE)) {
 		val64 = readq(&bar0->gpio_control);
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) bar0 + 0x2700);
+		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
 	}
 
-	/* 
-	 * Don't see link state interrupts on certain switches, so 
+	/*
+	 * Don't see link state interrupts on certain switches, so
 	 * directly scheduling a link state task from here.
 	 */
 	schedule_work(&nic->set_link_task);
 
-	/* 
-	 * Here we are performing soft reset on XGXS to 
-	 * force link down. Since link is already up, we will get
-	 * link state change interrupt after this reset
-	 */
-	SPECIAL_REG_WRITE(0x80010515001E0000ULL, &bar0->dtx_control, UF);
-	val64 = readq(&bar0->dtx_control);
-	udelay(50);
-	SPECIAL_REG_WRITE(0x80010515001E00E0ULL, &bar0->dtx_control, UF);
-	val64 = readq(&bar0->dtx_control);
-	udelay(50);
-	SPECIAL_REG_WRITE(0x80070515001F00E4ULL, &bar0->dtx_control, UF);
-	val64 = readq(&bar0->dtx_control);
-	udelay(50);
-
 	return SUCCESS;
 }
 
-/** 
- *  free_tx_buffers - Free all queued Tx buffers 
+/**
+ *  free_tx_buffers - Free all queued Tx buffers
  *  @nic : device private variable.
- *  Description: 
+ *  Description:
  *  Free all queued Tx buffers.
- *  Return Value: void 
+ *  Return Value: void
 */
 
 static void free_tx_buffers(struct s2io_nic *nic)
@@ -1459,39 +1962,61 @@ static void free_tx_buffers(struct s2io_nic *nic)
 	int i, j;
 	mac_info_t *mac_control;
 	struct config_param *config;
-	int cnt = 0;
+	int cnt = 0, frg_cnt;
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
 
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
-			txdp = (TxD_t *) nic->list_info[i][j].
+			txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
 			    list_virt_addr;
 			skb =
 			    (struct sk_buff *) ((unsigned long) txdp->
 						Host_Control);
 			if (skb == NULL) {
-				memset(txdp, 0, sizeof(TxD_t));
+				memset(txdp, 0, sizeof(TxD_t) *
+				       config->max_txds);
 				continue;
 			}
+			frg_cnt = skb_shinfo(skb)->nr_frags;
+			pci_unmap_single(nic->pdev, (dma_addr_t)
+					 txdp->Buffer_Pointer,
+					 skb->len - skb->data_len,
+					 PCI_DMA_TODEVICE);
+			if (frg_cnt) {
+				TxD_t *temp;
+				temp = txdp;
+				txdp++;
+				for (j = 0; j < frg_cnt; j++, txdp++) {
+					skb_frag_t *frag =
+					    &skb_shinfo(skb)->frags[j];
+					pci_unmap_page(nic->pdev,
+						       (dma_addr_t)
+						       txdp->
+						       Buffer_Pointer,
+						       frag->size,
+						       PCI_DMA_TODEVICE);
+				}
+				txdp = temp;
+			}
 			dev_kfree_skb(skb);
-			memset(txdp, 0, sizeof(TxD_t));
+			memset(txdp, 0, sizeof(TxD_t) * config->max_txds);
 			cnt++;
 		}
 		DBG_PRINT(INTR_DBG,
 			  "%s:forcibly freeing %d skbs on FIFO%d\n",
 			  dev->name, cnt, i);
-		mac_control->tx_curr_get_info[i].offset = 0;
-		mac_control->tx_curr_put_info[i].offset = 0;
+		mac_control->fifos[i].tx_curr_get_info.offset = 0;
+		mac_control->fifos[i].tx_curr_put_info.offset = 0;
 	}
 }
 
-/**  
- *   stop_nic -  To stop the nic  
+/**
+ *   stop_nic -  To stop the nic
  *   @nic ; device private variable.
- *   Description: 
- *   This function does exactly the opposite of what the start_nic() 
+ *   Description:
+ *   This function does exactly the opposite of what the start_nic()
  *   function does. This function is called to stop the device.
  *   Return Value:
  *   void.
@@ -1509,8 +2034,9 @@ static void stop_nic(struct s2io_nic *nic)
 	config = &nic->config;
 
 	/*  Disable all interrupts */
-	interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR | TX_MAC_INTR |
-	    RX_MAC_INTR;
+	interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR;
+	interruptible |= TX_PIC_INTR | RX_PIC_INTR;
+	interruptible |= TX_MAC_INTR | RX_MAC_INTR;
 	en_dis_able_nic_intrs(nic, interruptible, DISABLE_INTRS);
 
 	/*  Disable PRCs */
@@ -1521,11 +2047,11 @@ static void stop_nic(struct s2io_nic *nic)
 	}
 }
 
-/**  
- *  fill_rx_buffers - Allocates the Rx side skbs 
+/**
+ *  fill_rx_buffers - Allocates the Rx side skbs
  *  @nic:  device private variable
- *  @ring_no: ring number 
- *  Description: 
+ *  @ring_no: ring number
+ *  Description:
  *  The function allocates Rx side skbs and puts the physical
  *  address of these buffers into the RxD buffer pointers, so that the NIC
  *  can DMA the received frame into these locations.
@@ -1533,8 +2059,8 @@ static void stop_nic(struct s2io_nic *nic)
  *  1. single buffer,
  *  2. three buffer and
  *  3. Five buffer modes.
- *  Each mode defines how many fragments the received frame will be split 
- *  up into by the NIC. The frame is split into L3 header, L4 Header, 
+ *  Each mode defines how many fragments the received frame will be split
+ *  up into by the NIC. The frame is split into L3 header, L4 Header,
  *  L4 payload in three buffer mode and in 5 buffer mode, L4 payload itself
  *  is split into 3 fragments. As of now only single buffer mode is
  *  supported.
@@ -1542,7 +2068,7 @@ static void stop_nic(struct s2io_nic *nic)
  *  SUCCESS on success or an appropriate -ve value on failure.
  */
 
-static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 {
 	struct net_device *dev = nic->dev;
 	struct sk_buff *skb;
@@ -1550,34 +2076,35 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 	int off, off1, size, block_no, block_no1;
 	int offset, offset1;
 	u32 alloc_tab = 0;
-	u32 alloc_cnt = nic->pkt_cnt[ring_no] -
-	    atomic_read(&nic->rx_bufs_left[ring_no]);
+	u32 alloc_cnt;
 	mac_info_t *mac_control;
 	struct config_param *config;
 #ifdef CONFIG_2BUFF_MODE
 	RxD_t *rxdpnext;
 	int nextblk;
-	unsigned long tmp;
+	u64 tmp;
 	buffAdd_t *ba;
 	dma_addr_t rxdpphys;
 #endif
 #ifndef CONFIG_S2IO_NAPI
 	unsigned long flags;
 #endif
+	RxD_t *first_rxdp = NULL;
 
 	mac_control = &nic->mac_control;
 	config = &nic->config;
-
+	alloc_cnt = mac_control->rings[ring_no].pkt_cnt -
+	    atomic_read(&nic->rx_bufs_left[ring_no]);
 	size = dev->mtu + HEADER_ETHERNET_II_802_3_SIZE +
 	    HEADER_802_2_SIZE + HEADER_SNAP_SIZE;
 
 	while (alloc_tab < alloc_cnt) {
-		block_no = mac_control->rx_curr_put_info[ring_no].
+		block_no = mac_control->rings[ring_no].rx_curr_put_info.
 		    block_index;
-		block_no1 = mac_control->rx_curr_get_info[ring_no].
+		block_no1 = mac_control->rings[ring_no].rx_curr_get_info.
 		    block_index;
-		off = mac_control->rx_curr_put_info[ring_no].offset;
-		off1 = mac_control->rx_curr_get_info[ring_no].offset;
+		off = mac_control->rings[ring_no].rx_curr_put_info.offset;
+		off1 = mac_control->rings[ring_no].rx_curr_get_info.offset;
 #ifndef CONFIG_2BUFF_MODE
 		offset = block_no * (MAX_RXDS_PER_BLOCK + 1) + off;
 		offset1 = block_no1 * (MAX_RXDS_PER_BLOCK + 1) + off1;
@@ -1586,7 +2113,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		offset1 = block_no1 * (MAX_RXDS_PER_BLOCK) + off1;
 #endif
 
-		rxdp = nic->rx_blocks[ring_no][block_no].
+		rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
 		    block_virt_addr + off;
 		if ((offset == offset1) && (rxdp->Host_Control)) {
 			DBG_PRINT(INTR_DBG, "%s: Get and Put", dev->name);
@@ -1595,15 +2122,15 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		}
 #ifndef	CONFIG_2BUFF_MODE
 		if (rxdp->Control_1 == END_OF_BLOCK) {
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    block_index++;
-			mac_control->rx_curr_put_info[ring_no].
-			    block_index %= nic->block_count[ring_no];
-			block_no = mac_control->rx_curr_put_info
-			    [ring_no].block_index;
+			mac_control->rings[ring_no].rx_curr_put_info.
+			    block_index %= mac_control->rings[ring_no].block_count;
+			block_no = mac_control->rings[ring_no].rx_curr_put_info.
+				block_index;
 			off++;
 			off %= (MAX_RXDS_PER_BLOCK + 1);
-			mac_control->rx_curr_put_info[ring_no].offset =
+			mac_control->rings[ring_no].rx_curr_put_info.offset =
 			    off;
 			rxdp = (RxD_t *) ((unsigned long) rxdp->Control_2);
 			DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
@@ -1611,30 +2138,30 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		}
 #ifndef CONFIG_S2IO_NAPI
 		spin_lock_irqsave(&nic->put_lock, flags);
-		nic->put_pos[ring_no] =
+		mac_control->rings[ring_no].put_pos =
 		    (block_no * (MAX_RXDS_PER_BLOCK + 1)) + off;
 		spin_unlock_irqrestore(&nic->put_lock, flags);
 #endif
 #else
 		if (rxdp->Host_Control == END_OF_BLOCK) {
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    block_index++;
-			mac_control->rx_curr_put_info[ring_no].
-			    block_index %= nic->block_count[ring_no];
-			block_no = mac_control->rx_curr_put_info
-			    [ring_no].block_index;
+			mac_control->rings[ring_no].rx_curr_put_info.block_index
+			    %= mac_control->rings[ring_no].block_count;
+			block_no = mac_control->rings[ring_no].rx_curr_put_info
+			    .block_index;
 			off = 0;
 			DBG_PRINT(INTR_DBG, "%s: block%d at: 0x%llx\n",
 				  dev->name, block_no,
 				  (unsigned long long) rxdp->Control_1);
-			mac_control->rx_curr_put_info[ring_no].offset =
+			mac_control->rings[ring_no].rx_curr_put_info.offset =
 			    off;
-			rxdp = nic->rx_blocks[ring_no][block_no].
+			rxdp = mac_control->rings[ring_no].rx_blocks[block_no].
 			    block_virt_addr;
 		}
 #ifndef CONFIG_S2IO_NAPI
 		spin_lock_irqsave(&nic->put_lock, flags);
-		nic->put_pos[ring_no] = (block_no *
+		mac_control->rings[ring_no].put_pos = (block_no *
 					 (MAX_RXDS_PER_BLOCK + 1)) + off;
 		spin_unlock_irqrestore(&nic->put_lock, flags);
 #endif
@@ -1646,27 +2173,27 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		if (rxdp->Control_2 & BIT(0))
 #endif
 		{
-			mac_control->rx_curr_put_info[ring_no].
+			mac_control->rings[ring_no].rx_curr_put_info.
 			    offset = off;
 			goto end;
 		}
 #ifdef	CONFIG_2BUFF_MODE
-		/* 
-		 * RxDs Spanning cache lines will be replenished only 
-		 * if the succeeding RxD is also owned by Host. It 
-		 * will always be the ((8*i)+3) and ((8*i)+6) 
-		 * descriptors for the 48 byte descriptor. The offending 
+		/*
+		 * RxDs Spanning cache lines will be replenished only
+		 * if the succeeding RxD is also owned by Host. It
+		 * will always be the ((8*i)+3) and ((8*i)+6)
+		 * descriptors for the 48 byte descriptor. The offending
 		 * decsriptor is of-course the 3rd descriptor.
 		 */
-		rxdpphys = nic->rx_blocks[ring_no][block_no].
+		rxdpphys = mac_control->rings[ring_no].rx_blocks[block_no].
 		    block_dma_addr + (off * sizeof(RxD_t));
 		if (((u64) (rxdpphys)) % 128 > 80) {
-			rxdpnext = nic->rx_blocks[ring_no][block_no].
+			rxdpnext = mac_control->rings[ring_no].rx_blocks[block_no].
 			    block_virt_addr + (off + 1);
 			if (rxdpnext->Host_Control == END_OF_BLOCK) {
 				nextblk = (block_no + 1) %
-				    (nic->block_count[ring_no]);
-				rxdpnext = nic->rx_blocks[ring_no]
+				    (mac_control->rings[ring_no].block_count);
+				rxdpnext = mac_control->rings[ring_no].rx_blocks
 				    [nextblk].block_virt_addr;
 			}
 			if (rxdpnext->Control_2 & BIT(0))
@@ -1682,6 +2209,10 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		if (!skb) {
 			DBG_PRINT(ERR_DBG, "%s: Out of ", dev->name);
 			DBG_PRINT(ERR_DBG, "memory to allocate SKBs\n");
+			if (first_rxdp) {
+				wmb();
+				first_rxdp->Control_1 |= RXD_OWN_XENA;
+			}
 			return -ENOMEM;
 		}
 #ifndef	CONFIG_2BUFF_MODE
@@ -1692,12 +2223,13 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		rxdp->Control_2 &= (~MASK_BUFFER0_SIZE);
 		rxdp->Control_2 |= SET_BUFFER0_SIZE(size);
 		rxdp->Host_Control = (unsigned long) (skb);
-		rxdp->Control_1 |= RXD_OWN_XENA;
+		if (alloc_tab & ((1 << rxsync_frequency) - 1))
+			rxdp->Control_1 |= RXD_OWN_XENA;
 		off++;
 		off %= (MAX_RXDS_PER_BLOCK + 1);
-		mac_control->rx_curr_put_info[ring_no].offset = off;
+		mac_control->rings[ring_no].rx_curr_put_info.offset = off;
 #else
-		ba = &nic->ba[ring_no][block_no][off];
+		ba = &mac_control->rings[ring_no].ba[block_no][off];
 		skb_reserve(skb, BUF0_LEN);
 		tmp = ((unsigned long) skb->data & ALIGN_SIZE);
 		if (tmp)
@@ -1719,22 +2251,41 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
 		rxdp->Control_2 |= SET_BUFFER1_SIZE(1);	/* dummy. */
 		rxdp->Control_2 |= BIT(0);	/* Set Buffer_Empty bit. */
 		rxdp->Host_Control = (u64) ((unsigned long) (skb));
-		rxdp->Control_1 |= RXD_OWN_XENA;
+		if (alloc_tab & ((1 << rxsync_frequency) - 1))
+			rxdp->Control_1 |= RXD_OWN_XENA;
 		off++;
-		mac_control->rx_curr_put_info[ring_no].offset = off;
+		mac_control->rings[ring_no].rx_curr_put_info.offset = off;
 #endif
+		rxdp->Control_2 |= SET_RXD_MARKER;
+
+		if (!(alloc_tab & ((1 << rxsync_frequency) - 1))) {
+			if (first_rxdp) {
+				wmb();
+				first_rxdp->Control_1 |= RXD_OWN_XENA;
+			}
+			first_rxdp = rxdp;
+		}
 		atomic_inc(&nic->rx_bufs_left[ring_no]);
 		alloc_tab++;
 	}
 
       end:
+	/* Transfer ownership of first descriptor to adapter just before
+	 * exiting. Before that, use memory barrier so that ownership
+	 * and other fields are seen by adapter correctly.
+	 */
+	if (first_rxdp) {
+		wmb();
+		first_rxdp->Control_1 |= RXD_OWN_XENA;
+	}
+
 	return SUCCESS;
 }
 
 /**
- *  free_rx_buffers - Frees all Rx buffers   
+ *  free_rx_buffers - Frees all Rx buffers
  *  @sp: device private variable.
- *  Description: 
+ *  Description:
  *  This function will free all Rx buffers allocated by host.
  *  Return Value:
  *  NONE.
@@ -1758,7 +2309,8 @@ static void free_rx_buffers(struct s2io_nic *sp)
 	for (i = 0; i < config->rx_ring_num; i++) {
 		for (j = 0, blk = 0; j < config->rx_cfg[i].num_rxd; j++) {
 			off = j % (MAX_RXDS_PER_BLOCK + 1);
-			rxdp = sp->rx_blocks[i][blk].block_virt_addr + off;
+			rxdp = mac_control->rings[i].rx_blocks[blk].
+				block_virt_addr + off;
 
 #ifndef CONFIG_2BUFF_MODE
 			if (rxdp->Control_1 == END_OF_BLOCK) {
@@ -1793,7 +2345,7 @@ static void free_rx_buffers(struct s2io_nic *sp)
 						 HEADER_SNAP_SIZE,
 						 PCI_DMA_FROMDEVICE);
 #else
-				ba = &sp->ba[i][blk][off];
+				ba = &mac_control->rings[i].ba[blk][off];
 				pci_unmap_single(sp->pdev, (dma_addr_t)
 						 rxdp->Buffer0_ptr,
 						 BUF0_LEN,
@@ -1813,10 +2365,10 @@ static void free_rx_buffers(struct s2io_nic *sp)
 			}
 			memset(rxdp, 0, sizeof(RxD_t));
 		}
-		mac_control->rx_curr_put_info[i].block_index = 0;
-		mac_control->rx_curr_get_info[i].block_index = 0;
-		mac_control->rx_curr_put_info[i].offset = 0;
-		mac_control->rx_curr_get_info[i].offset = 0;
+		mac_control->rings[i].rx_curr_put_info.block_index = 0;
+		mac_control->rings[i].rx_curr_get_info.block_index = 0;
+		mac_control->rings[i].rx_curr_put_info.offset = 0;
+		mac_control->rings[i].rx_curr_get_info.offset = 0;
 		atomic_set(&sp->rx_bufs_left[i], 0);
 		DBG_PRINT(INIT_DBG, "%s:Freed 0x%x Rx Buffers on ring%d\n",
 			  dev->name, buf_cnt, i);
@@ -1826,7 +2378,7 @@ static void free_rx_buffers(struct s2io_nic *sp)
 /**
  * s2io_poll - Rx interrupt handler for NAPI support
  * @dev : pointer to the device structure.
- * @budget : The number of packets that were budgeted to be processed 
+ * @budget : The number of packets that were budgeted to be processed
  * during  one pass through the 'Poll" function.
  * Description:
  * Comes into picture only if NAPI support has been incorporated. It does
@@ -1836,160 +2388,36 @@ static void free_rx_buffers(struct s2io_nic *sp)
  * 0 on success and 1 if there are No Rx packets to be processed.
  */
 
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
 static int s2io_poll(struct net_device *dev, int *budget)
 {
 	nic_t *nic = dev->priv;
-	XENA_dev_config_t __iomem *bar0 = nic->bar0;
-	int pkts_to_process = *budget, pkt_cnt = 0;
-	register u64 val64 = 0;
-	rx_curr_get_info_t get_info, put_info;
-	int i, get_block, put_block, get_offset, put_offset, ring_bufs;
-#ifndef CONFIG_2BUFF_MODE
-	u16 val16, cksum;
-#endif
-	struct sk_buff *skb;
-	RxD_t *rxdp;
+	int pkt_cnt = 0, org_pkts_to_process;
 	mac_info_t *mac_control;
 	struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
-	buffAdd_t *ba;
-#endif
+	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	u64 val64;
+	int i;
 
+	atomic_inc(&nic->isr_cnt);
 	mac_control = &nic->mac_control;
 	config = &nic->config;
 
-	if (pkts_to_process > dev->quota)
-		pkts_to_process = dev->quota;
+	nic->pkts_to_process = *budget;
+	if (nic->pkts_to_process > dev->quota)
+		nic->pkts_to_process = dev->quota;
+	org_pkts_to_process = nic->pkts_to_process;
 
 	val64 = readq(&bar0->rx_traffic_int);
 	writeq(val64, &bar0->rx_traffic_int);
 
 	for (i = 0; i < config->rx_ring_num; i++) {
-		get_info = mac_control->rx_curr_get_info[i];
-		get_block = get_info.block_index;
-		put_info = mac_control->rx_curr_put_info[i];
-		put_block = put_info.block_index;
-		ring_bufs = config->rx_cfg[i].num_rxd;
-		rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
-		    get_info.offset;
-#ifndef	CONFIG_2BUFF_MODE
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    put_info.offset;
-		while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (--pkts_to_process < 0) {
-				goto no_rx;
-			}
-			if (rxdp->Control_1 == END_OF_BLOCK) {
-				rxdp =
-				    (RxD_t *) ((unsigned long) rxdp->
-					       Control_2);
-				get_info.offset++;
-				get_info.offset %=
-				    (MAX_RXDS_PER_BLOCK + 1);
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				continue;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			skb =
-			    (struct sk_buff *) ((unsigned long) rxdp->
-						Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				goto no_rx;
-			}
-			val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-			val16 = (u16) (val64 >> 48);
-			cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 dev->mtu +
-					 HEADER_ETHERNET_II_802_3_SIZE +
-					 HEADER_802_2_SIZE +
-					 HEADER_SNAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
-			rx_osm_handler(nic, val16, rxdp, i);
-			pkt_cnt++;
-			get_info.offset++;
-			get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
+		rx_intr_handler(&mac_control->rings[i]);
+		pkt_cnt = org_pkts_to_process - nic->pkts_to_process;
+		if (!nic->pkts_to_process) {
+			/* Quota for the current iteration has been met */
+			goto no_rx;
 		}
-#else
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    get_info.offset;
-		put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
-		    put_info.offset;
-		while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-			!(rxdp->Control_2 & BIT(0))) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (--pkts_to_process < 0) {
-				goto no_rx;
-			}
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				goto no_rx;
-			}
-
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 BUF0_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer1_ptr,
-					 BUF1_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer2_ptr,
-					 dev->mtu + BUF0_LEN + 4,
-					 PCI_DMA_FROMDEVICE);
-			ba = &nic->ba[i][get_block][get_info.offset];
-
-			rx_osm_handler(nic, rxdp, i, ba);
-
-			get_info.offset++;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-
-			if (get_info.offset &&
-			    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
-				get_info.offset = 0;
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				rxdp =
-				    nic->rx_blocks[i][get_block].
-				    block_virt_addr;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			pkt_cnt++;
-		}
-#endif
 	}
 	if (!pkt_cnt)
 		pkt_cnt = 1;
@@ -2007,9 +2435,10 @@ static int s2io_poll(struct net_device *dev, int *budget)
 	}
 	/* Re enable the Rx interrupts. */
 	en_dis_able_nic_intrs(nic, RX_TRAFFIC_INTR, ENABLE_INTRS);
+	atomic_dec(&nic->isr_cnt);
 	return 0;
 
-      no_rx:
+no_rx:
 	dev->quota -= pkt_cnt;
 	*budget -= pkt_cnt;
 
@@ -2020,279 +2449,204 @@ static int s2io_poll(struct net_device *dev, int *budget)
 			break;
 		}
 	}
+	atomic_dec(&nic->isr_cnt);
 	return 1;
 }
-#else
-/**  
+#endif
+
+/**
  *  rx_intr_handler - Rx interrupt handler
  *  @nic: device private variable.
- *  Description: 
- *  If the interrupt is because of a received frame or if the 
+ *  Description:
+ *  If the interrupt is because of a received frame or if the
  *  receive ring contains fresh as yet un-processed frames,this function is
- *  called. It picks out the RxD at which place the last Rx processing had 
- *  stopped and sends the skb to the OSM's Rx handler and then increments 
+ *  called. It picks out the RxD at which place the last Rx processing had
+ *  stopped and sends the skb to the OSM's Rx handler and then increments
  *  the offset.
  *  Return Value:
  *  NONE.
  */
-
-static void rx_intr_handler(struct s2io_nic *nic)
+static void rx_intr_handler(ring_info_t *ring_data)
 {
+	nic_t *nic = ring_data->nic;
 	struct net_device *dev = (struct net_device *) nic->dev;
-	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
+	int get_block, get_offset, put_block, put_offset, ring_bufs;
 	rx_curr_get_info_t get_info, put_info;
 	RxD_t *rxdp;
 	struct sk_buff *skb;
-#ifndef CONFIG_2BUFF_MODE
-	u16 val16, cksum;
-#endif
-	register u64 val64 = 0;
-	int get_block, get_offset, put_block, put_offset, ring_bufs;
-	int i, pkt_cnt = 0;
-	mac_info_t *mac_control;
-	struct config_param *config;
-#ifdef CONFIG_2BUFF_MODE
-	buffAdd_t *ba;
+#ifndef CONFIG_S2IO_NAPI
+	int pkt_cnt = 0;
 #endif
+	spin_lock(&nic->rx_lock);
+	if (atomic_read(&nic->card_state) == CARD_DOWN) {
+		DBG_PRINT(ERR_DBG, "%s: %s going down for reset\n",
+			  __FUNCTION__, dev->name);
+		spin_unlock(&nic->rx_lock);
+	}
 
-	mac_control = &nic->mac_control;
-	config = &nic->config;
-
-	/* 
-	 * rx_traffic_int reg is an R1 register, hence we read and write back 
-	 * the samevalue in the register to clear it.
-	 */
-	val64 = readq(&bar0->rx_traffic_int);
-	writeq(val64, &bar0->rx_traffic_int);
-
-	for (i = 0; i < config->rx_ring_num; i++) {
-		get_info = mac_control->rx_curr_get_info[i];
-		get_block = get_info.block_index;
-		put_info = mac_control->rx_curr_put_info[i];
-		put_block = put_info.block_index;
-		ring_bufs = config->rx_cfg[i].num_rxd;
-		rxdp = nic->rx_blocks[i][get_block].block_virt_addr +
-		    get_info.offset;
-#ifndef	CONFIG_2BUFF_MODE
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+	get_info = ring_data->rx_curr_get_info;
+	get_block = get_info.block_index;
+	put_info = ring_data->rx_curr_put_info;
+	put_block = put_info.block_index;
+	ring_bufs = get_info.ring_len+1;
+	rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
 		    get_info.offset;
-		spin_lock(&nic->put_lock);
-		put_offset = nic->put_pos[i];
-		spin_unlock(&nic->put_lock);
-		while ((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			if (rxdp->Control_1 == END_OF_BLOCK) {
-				rxdp = (RxD_t *) ((unsigned long)
-						  rxdp->Control_2);
-				get_info.offset++;
-				get_info.offset %=
-				    (MAX_RXDS_PER_BLOCK + 1);
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				continue;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
-			    get_info.offset;
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				return;
-			}
-			val64 = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-			val16 = (u16) (val64 >> 48);
-			cksum = RXD_GET_L4_CKSUM(rxdp->Control_1);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 dev->mtu +
-					 HEADER_ETHERNET_II_802_3_SIZE +
-					 HEADER_802_2_SIZE +
-					 HEADER_SNAP_SIZE,
-					 PCI_DMA_FROMDEVICE);
-			rx_osm_handler(nic, val16, rxdp, i);
-			get_info.offset++;
-			get_info.offset %= (MAX_RXDS_PER_BLOCK + 1);
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			pkt_cnt++;
-			if ((indicate_max_pkts)
-			    && (pkt_cnt > indicate_max_pkts))
-				break;
+	get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		get_info.offset;
+#ifndef CONFIG_S2IO_NAPI
+	spin_lock(&nic->put_lock);
+	put_offset = ring_data->put_pos;
+	spin_unlock(&nic->put_lock);
+#else
+	put_offset = (put_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		put_info.offset;
+#endif
+	while (RXD_IS_UP2DT(rxdp) &&
+	       (((get_offset + 1) % ring_bufs) != put_offset)) {
+		skb = (struct sk_buff *) ((unsigned long)rxdp->Host_Control);
+		if (skb == NULL) {
+			DBG_PRINT(ERR_DBG, "%s: The skb is ",
+				  dev->name);
+			DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
+			spin_unlock(&nic->rx_lock);
+			return;
 		}
+#ifndef CONFIG_2BUFF_MODE
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer0_ptr,
+				 dev->mtu +
+				 HEADER_ETHERNET_II_802_3_SIZE +
+				 HEADER_802_2_SIZE +
+				 HEADER_SNAP_SIZE,
+				 PCI_DMA_FROMDEVICE);
 #else
-		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer0_ptr,
+				 BUF0_LEN, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer1_ptr,
+				 BUF1_LEN, PCI_DMA_FROMDEVICE);
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 rxdp->Buffer2_ptr,
+				 dev->mtu + BUF0_LEN + 4,
+				 PCI_DMA_FROMDEVICE);
+#endif
+		rx_osm_handler(ring_data, rxdp);
+		get_info.offset++;
+		ring_data->rx_curr_get_info.offset =
 		    get_info.offset;
-		spin_lock(&nic->put_lock);
-		put_offset = nic->put_pos[i];
-		spin_unlock(&nic->put_lock);
-		while (((!(rxdp->Control_1 & RXD_OWN_XENA)) &&
-			!(rxdp->Control_2 & BIT(0))) &&
-		       (((get_offset + 1) % ring_bufs) != put_offset)) {
-			skb = (struct sk_buff *) ((unsigned long)
-						  rxdp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: The skb is ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
-				return;
-			}
-
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer0_ptr,
-					 BUF0_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer1_ptr,
-					 BUF1_LEN, PCI_DMA_FROMDEVICE);
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 rxdp->Buffer2_ptr,
-					 dev->mtu + BUF0_LEN + 4,
-					 PCI_DMA_FROMDEVICE);
-			ba = &nic->ba[i][get_block][get_info.offset];
-
-			rx_osm_handler(nic, rxdp, i, ba);
-
-			get_info.offset++;
-			mac_control->rx_curr_get_info[i].offset =
-			    get_info.offset;
-			rxdp =
-			    nic->rx_blocks[i][get_block].block_virt_addr +
-			    get_info.offset;
+		rxdp = ring_data->rx_blocks[get_block].block_virt_addr +
+		    get_info.offset;
+		if (get_info.offset &&
+		    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
+			get_info.offset = 0;
+			ring_data->rx_curr_get_info.offset
+			    = get_info.offset;
+			get_block++;
+			get_block %= ring_data->block_count;
+			ring_data->rx_curr_get_info.block_index
+			    = get_block;
+			rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
+		}
 
-			if (get_info.offset &&
-			    (!(get_info.offset % MAX_RXDS_PER_BLOCK))) {
-				get_info.offset = 0;
-				mac_control->rx_curr_get_info[i].
-				    offset = get_info.offset;
-				get_block++;
-				get_block %= nic->block_count[i];
-				mac_control->rx_curr_get_info[i].
-				    block_index = get_block;
-				rxdp =
-				    nic->rx_blocks[i][get_block].
-				    block_virt_addr;
-			}
-			get_offset =
-			    (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
+		get_offset = (get_block * (MAX_RXDS_PER_BLOCK + 1)) +
 			    get_info.offset;
-			pkt_cnt++;
-			if ((indicate_max_pkts)
-			    && (pkt_cnt > indicate_max_pkts))
-				break;
-		}
-#endif
+#ifdef CONFIG_S2IO_NAPI
+		nic->pkts_to_process -= 1;
+		if (!nic->pkts_to_process)
+			break;
+#else
+		pkt_cnt++;
 		if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
 			break;
+#endif
 	}
+	spin_unlock(&nic->rx_lock);
 }
-#endif
-/**  
+
+/**
  *  tx_intr_handler - Transmit interrupt handler
  *  @nic : device private variable
- *  Description: 
- *  If an interrupt was raised to indicate DMA complete of the 
- *  Tx packet, this function is called. It identifies the last TxD 
- *  whose buffer was freed and frees all skbs whose data have already 
+ *  Description:
+ *  If an interrupt was raised to indicate DMA complete of the
+ *  Tx packet, this function is called. It identifies the last TxD
+ *  whose buffer was freed and frees all skbs whose data have already
  *  DMA'ed into the NICs internal memory.
  *  Return Value:
  *  NONE
  */
 
-static void tx_intr_handler(struct s2io_nic *nic)
+static void tx_intr_handler(fifo_info_t *fifo_data)
 {
-	XENA_dev_config_t __iomem *bar0 = nic->bar0;
+	nic_t *nic = fifo_data->nic;
 	struct net_device *dev = (struct net_device *) nic->dev;
 	tx_curr_get_info_t get_info, put_info;
 	struct sk_buff *skb;
 	TxD_t *txdlp;
-	register u64 val64 = 0;
-	int i;
 	u16 j, frg_cnt;
-	mac_info_t *mac_control;
-	struct config_param *config;
 
-	mac_control = &nic->mac_control;
-	config = &nic->config;
-
-	/* 
-	 * tx_traffic_int reg is an R1 register, hence we read and write 
-	 * back the samevalue in the register to clear it.
-	 */
-	val64 = readq(&bar0->tx_traffic_int);
-	writeq(val64, &bar0->tx_traffic_int);
+	get_info = fifo_data->tx_curr_get_info;
+	put_info = fifo_data->tx_curr_put_info;
+	txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
+	    list_virt_addr;
+	while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
+	       (get_info.offset != put_info.offset) &&
+	       (txdlp->Host_Control)) {
+		/* Check for TxD errors */
+		if (txdlp->Control_1 & TXD_T_CODE) {
+			unsigned long long err;
+			err = txdlp->Control_1 & TXD_T_CODE;
+			DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
+				  err);
+		}
 
-	for (i = 0; i < config->tx_fifo_num; i++) {
-		get_info = mac_control->tx_curr_get_info[i];
-		put_info = mac_control->tx_curr_put_info[i];
-		txdlp = (TxD_t *) nic->list_info[i][get_info.offset].
-		    list_virt_addr;
-		while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
-		       (get_info.offset != put_info.offset) &&
-		       (txdlp->Host_Control)) {
-			/* Check for TxD errors */
-			if (txdlp->Control_1 & TXD_T_CODE) {
-				unsigned long long err;
-				err = txdlp->Control_1 & TXD_T_CODE;
-				DBG_PRINT(ERR_DBG, "***TxD error %llx\n",
-					  err);
-			}
+		skb = (struct sk_buff *) ((unsigned long)
+				txdlp->Host_Control);
+		if (skb == NULL) {
+			DBG_PRINT(ERR_DBG, "%s: Null skb ",
+			__FUNCTION__);
+			DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
+			return;
+		}
 
-			skb = (struct sk_buff *) ((unsigned long)
-						  txdlp->Host_Control);
-			if (skb == NULL) {
-				DBG_PRINT(ERR_DBG, "%s: Null skb ",
-					  dev->name);
-				DBG_PRINT(ERR_DBG, "in Tx Free Intr\n");
-				return;
+		frg_cnt = skb_shinfo(skb)->nr_frags;
+		nic->tx_pkt_count++;
+
+		pci_unmap_single(nic->pdev, (dma_addr_t)
+				 txdlp->Buffer_Pointer,
+				 skb->len - skb->data_len,
+				 PCI_DMA_TODEVICE);
+		if (frg_cnt) {
+			TxD_t *temp;
+			temp = txdlp;
+			txdlp++;
+			for (j = 0; j < frg_cnt; j++, txdlp++) {
+				skb_frag_t *frag =
+				    &skb_shinfo(skb)->frags[j];
+				if (!txdlp->Buffer_Pointer)
+					break;
+				pci_unmap_page(nic->pdev,
+					       (dma_addr_t)
+					       txdlp->
+					       Buffer_Pointer,
+					       frag->size,
+					       PCI_DMA_TODEVICE);
 			}
-			nic->tx_pkt_count++;
-
-			frg_cnt = skb_shinfo(skb)->nr_frags;
-
-			/*  For unfragmented skb */
-			pci_unmap_single(nic->pdev, (dma_addr_t)
-					 txdlp->Buffer_Pointer,
-					 skb->len - skb->data_len,
-					 PCI_DMA_TODEVICE);
-			if (frg_cnt) {
-				TxD_t *temp = txdlp;
-				txdlp++;
-				for (j = 0; j < frg_cnt; j++, txdlp++) {
-					skb_frag_t *frag =
-					    &skb_shinfo(skb)->frags[j];
-					pci_unmap_page(nic->pdev,
-						       (dma_addr_t)
-						       txdlp->
-						       Buffer_Pointer,
-						       frag->size,
-						       PCI_DMA_TODEVICE);
-				}
-				txdlp = temp;
-			}
-			memset(txdlp, 0,
-			       (sizeof(TxD_t) * config->max_txds));
-
-			/* Updating the statistics block */
-			nic->stats.tx_packets++;
-			nic->stats.tx_bytes += skb->len;
-			dev_kfree_skb_irq(skb);
-
-			get_info.offset++;
-			get_info.offset %= get_info.fifo_len + 1;
-			txdlp = (TxD_t *) nic->list_info[i]
-			    [get_info.offset].list_virt_addr;
-			mac_control->tx_curr_get_info[i].offset =
-			    get_info.offset;
+			txdlp = temp;
 		}
+		memset(txdlp, 0,
+		       (sizeof(TxD_t) * fifo_data->max_txds));
+
+		/* Updating the statistics block */
+		nic->stats.tx_bytes += skb->len;
+		dev_kfree_skb_irq(skb);
+
+		get_info.offset++;
+		get_info.offset %= get_info.fifo_len + 1;
+		txdlp = (TxD_t *) fifo_data->list_info
+		    [get_info.offset].list_virt_addr;
+		fifo_data->tx_curr_get_info.offset =
+		    get_info.offset;
 	}
 
 	spin_lock(&nic->tx_lock);
@@ -2301,13 +2655,13 @@ static void tx_intr_handler(struct s2io_nic *nic)
 	spin_unlock(&nic->tx_lock);
 }
 
-/**  
+/**
  *  alarm_intr_handler - Alarm Interrrupt handler
  *  @nic: device private variable
- *  Description: If the interrupt was neither because of Rx packet or Tx 
+ *  Description: If the interrupt was neither because of Rx packet or Tx
  *  complete, this function is called. If the interrupt was to indicate
- *  a loss of link, the OSM link status handler is invoked for any other 
- *  alarm interrupt the block that raised the interrupt is displayed 
+ *  a loss of link, the OSM link status handler is invoked for any other
+ *  alarm interrupt the block that raised the interrupt is displayed
  *  and a H/W reset is issued.
  *  Return Value:
  *  NONE
@@ -2320,10 +2674,32 @@ static void alarm_intr_handler(struct s2io_nic *nic)
 	register u64 val64 = 0, err_reg = 0;
 
 	/* Handling link status change error Intr */
-	err_reg = readq(&bar0->mac_rmac_err_reg);
-	writeq(err_reg, &bar0->mac_rmac_err_reg);
-	if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
-		schedule_work(&nic->set_link_task);
+	if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+		err_reg = readq(&bar0->mac_rmac_err_reg);
+		writeq(err_reg, &bar0->mac_rmac_err_reg);
+		if (err_reg & RMAC_LINK_STATE_CHANGE_INT) {
+			schedule_work(&nic->set_link_task);
+		}
+	}
+
+	/* Handling Ecc errors */
+	val64 = readq(&bar0->mc_err_reg);
+	writeq(val64, &bar0->mc_err_reg);
+	if (val64 & (MC_ERR_REG_ECC_ALL_SNG | MC_ERR_REG_ECC_ALL_DBL)) {
+		if (val64 & MC_ERR_REG_ECC_ALL_DBL) {
+			nic->mac_control.stats_info->sw_stat.
+				double_ecc_errs++;
+			DBG_PRINT(ERR_DBG, "%s: Device indicates ",
+				  dev->name);
+			DBG_PRINT(ERR_DBG, "double ECC error!!\n");
+			if (nic->device_type != XFRAME_II_DEVICE) {
+				netif_stop_queue(dev);
+				schedule_work(&nic->rst_timer_task);
+			}
+		} else {
+			nic->mac_control.stats_info->sw_stat.
+				single_ecc_errs++;
+		}
 	}
 
 	/* In case of a serious error, the device will be Reset. */
@@ -2338,7 +2714,7 @@ static void alarm_intr_handler(struct s2io_nic *nic)
 	/*
 	 * Also as mentioned in the latest Errata sheets if the PCC_FB_ECC
 	 * Error occurs, the adapter will be recycled by disabling the
-	 * adapter enable bit and enabling it again after the device 
+	 * adapter enable bit and enabling it again after the device
 	 * becomes Quiescent.
 	 */
 	val64 = readq(&bar0->pcc_err_reg);
@@ -2354,18 +2730,18 @@ static void alarm_intr_handler(struct s2io_nic *nic)
 	/* Other type of interrupts are not being handled now,  TODO */
 }
 
-/** 
+/**
  *  wait_for_cmd_complete - waits for a command to complete.
- *  @sp : private member of the device structure, which is a pointer to the 
+ *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  Description: Function that waits for a command to Write into RMAC 
- *  ADDR DATA registers to be completed and returns either success or 
- *  error depending on whether the command was complete or not. 
+ *  Description: Function that waits for a command to Write into RMAC
+ *  ADDR DATA registers to be completed and returns either success or
+ *  error depending on whether the command was complete or not.
  *  Return value:
  *   SUCCESS on success and FAILURE on failure.
  */
 
-static int wait_for_cmd_complete(nic_t * sp)
+int wait_for_cmd_complete(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	int ret = FAILURE, cnt = 0;
@@ -2385,29 +2761,32 @@ static int wait_for_cmd_complete(nic_t * sp)
 	return ret;
 }
 
-/** 
- *  s2io_reset - Resets the card. 
+/**
+ *  s2io_reset - Resets the card.
  *  @sp : private member of the device structure.
  *  Description: Function to Reset the card. This function then also
- *  restores the previously saved PCI configuration space registers as 
+ *  restores the previously saved PCI configuration space registers as
  *  the card reset also resets the configuration space.
  *  Return value:
  *  void.
  */
 
-static void s2io_reset(nic_t * sp)
+void s2io_reset(nic_t * sp)
 {
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64;
-	u16 subid;
+	u16 subid, pci_cmd;
+
+	/* Back up  the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
+	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
 
 	val64 = SW_RESET_ALL;
 	writeq(val64, &bar0->sw_reset);
 
-	/* 
-	 * At this stage, if the PCI write is indeed completed, the 
-	 * card is reset and so is the PCI Config space of the device. 
-	 * So a read cannot be issued at this stage on any of the 
+	/*
+	 * At this stage, if the PCI write is indeed completed, the
+	 * card is reset and so is the PCI Config space of the device.
+	 * So a read cannot be issued at this stage on any of the
 	 * registers to ensure the write into "sw_reset" register
 	 * has gone through.
 	 * Question: Is there any system call that will explicitly force
@@ -2418,42 +2797,72 @@ static void s2io_reset(nic_t * sp)
 	 */
 	msleep(250);
 
-	/* Restore the PCI state saved during initializarion. */
+	/* Restore the PCI state saved during initialization. */
 	pci_restore_state(sp->pdev);
+	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
+				     pci_cmd);
 	s2io_init_pci(sp);
 
 	msleep(250);
 
+	/* Set swapper to enable I/O register access */
+	s2io_set_swapper(sp);
+
+	/* Clear certain PCI/PCI-X fields after reset */
+	if (sp->device_type == XFRAME_II_DEVICE) {
+		/* Clear parity err detect bit */
+		pci_write_config_word(sp->pdev, PCI_STATUS, 0x8000);
+
+		/* Clearing PCIX Ecc status register */
+		pci_write_config_dword(sp->pdev, 0x68, 0x7C);
+
+		/* Clearing PCI_STATUS error reflected here */
+		writeq(BIT(62), &bar0->txpic_int_reg);
+	}
+
+	/* Reset device statistics maintained by OS */
+	memset(&sp->stats, 0, sizeof (struct net_device_stats));
+
 	/* SXE-002: Configure link and activity LED to turn it off */
 	subid = sp->pdev->subsystem_device;
-	if ((subid & 0xFF) >= 0x07) {
+	if (((subid & 0xFF) >= 0x07) &&
+	    (sp->device_type == XFRAME_I_DEVICE)) {
 		val64 = readq(&bar0->gpio_control);
 		val64 |= 0x0000800000000000ULL;
 		writeq(val64, &bar0->gpio_control);
 		val64 = 0x0411040400000000ULL;
-		writeq(val64, (void __iomem *) bar0 + 0x2700);
+		writeq(val64, (void __iomem *) ((u8 *) bar0 + 0x2700));
+	}
+
+	/*
+	 * Clear spurious ECC interrupts that would have occured on
+	 * XFRAME II cards after reset.
+	 */
+	if (sp->device_type == XFRAME_II_DEVICE) {
+		val64 = readq(&bar0->pcc_err_reg);
+		writeq(val64, &bar0->pcc_err_reg);
 	}
 
 	sp->device_enabled_once = FALSE;
 }
 
 /**
- *  s2io_set_swapper - to set the swapper controle on the card 
- *  @sp : private member of the device structure, 
+ *  s2io_set_swapper - to set the swapper controle on the card
+ *  @sp : private member of the device structure,
  *  pointer to the s2io_nic structure.
- *  Description: Function to set the swapper control on the card 
+ *  Description: Function to set the swapper control on the card
  *  correctly depending on the 'endianness' of the system.
  *  Return value:
  *  SUCCESS on success and FAILURE on failure.
  */
 
-static int s2io_set_swapper(nic_t * sp)
+int s2io_set_swapper(nic_t * sp)
 {
 	struct net_device *dev = sp->dev;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 	u64 val64, valt, valr;
 
-	/* 
+	/*
 	 * Set proper endian settings and verify the same by reading
 	 * the PIF Feed-back register.
 	 */
@@ -2505,8 +2914,9 @@ static int s2io_set_swapper(nic_t * sp)
 			i++;
 		}
 		if(i == 4) {
+			unsigned long long x = val64;
 			DBG_PRINT(ERR_DBG, "Write failed, Xmsi_addr ");
-			DBG_PRINT(ERR_DBG, "reads:0x%llx\n",val64);
+			DBG_PRINT(ERR_DBG, "reads:0x%llx\n", x);
 			return FAILURE;
 		}
 	}
@@ -2514,8 +2924,8 @@ static int s2io_set_swapper(nic_t * sp)
 	val64 &= 0xFFFF000000000000ULL;
 
 #ifdef  __BIG_ENDIAN
-	/* 
-	 * The device by default set to a big endian format, so a 
+	/*
+	 * The device by default set to a big endian format, so a
 	 * big endian driver need not set anything.
 	 */
 	val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2531,9 +2941,9 @@ static int s2io_set_swapper(nic_t * sp)
 		 SWAPPER_CTRL_STATS_FE | SWAPPER_CTRL_STATS_SE);
 	writeq(val64, &bar0->swapper_ctrl);
 #else
-	/* 
+	/*
 	 * Initially we enable all bits to make it accessible by the
-	 * driver, then we selectively enable only those bits that 
+	 * driver, then we selectively enable only those bits that
 	 * we want to set.
 	 */
 	val64 |= (SWAPPER_CTRL_TXP_FE |
@@ -2555,8 +2965,8 @@ static int s2io_set_swapper(nic_t * sp)
 #endif
 	val64 = readq(&bar0->swapper_ctrl);
 
-	/* 
-	 * Verifying if endian settings are accurate by reading a 
+	/*
+	 * Verifying if endian settings are accurate by reading a
 	 * feedback register.
 	 */
 	val64 = readq(&bar0->pif_rd_swapper_fb);
@@ -2576,55 +2986,63 @@ static int s2io_set_swapper(nic_t * sp)
  * Functions defined below concern the OS part of the driver *
  * ********************************************************* */
 
-/**  
+/**
  *  s2io_open - open entry point of the driver
  *  @dev : pointer to the device structure.
  *  Description:
  *  This function is the open entry point of the driver. It mainly calls a
  *  function to allocate Rx buffers and inserts them into the buffer
- *  descriptors and then enables the Rx part of the NIC. 
+ *  descriptors and then enables the Rx part of the NIC.
  *  Return value:
  *  0 on success and an appropriate (-)ve integer as defined in errno.h
  *   file on failure.
  */
 
-static int s2io_open(struct net_device *dev)
+int s2io_open(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	int err = 0;
 
-	/* 
-	 * Make sure you have link off by default every time 
+	/*
+	 * Make sure you have link off by default every time
 	 * Nic is initialized
 	 */
 	netif_carrier_off(dev);
-	sp->last_link_state = LINK_DOWN;
+	sp->last_link_state = 0;
 
 	/* Initialize H/W and enable interrupts */
 	if (s2io_card_up(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: H/W initialization failed\n",
 			  dev->name);
-		return -ENODEV;
+		err = -ENODEV;
+		goto hw_init_failed;
 	}
 
 	/* After proper initialization of H/W, register ISR */
-	err = request_irq((int) sp->irq, s2io_isr, SA_SHIRQ,
+	err = request_irq((int) sp->pdev->irq, s2io_isr, SA_SHIRQ,
 			  sp->name, dev);
 	if (err) {
-		s2io_reset(sp);
 		DBG_PRINT(ERR_DBG, "%s: ISR registration failed\n",
 			  dev->name);
-		return err;
+		goto isr_registration_failed;
 	}
 
 	if (s2io_set_mac_addr(dev, dev->dev_addr) == FAILURE) {
 		DBG_PRINT(ERR_DBG, "Set Mac Address Failed\n");
-		s2io_reset(sp);
-		return -ENODEV;
+		err = -ENODEV;
+		goto setting_mac_address_failed;
 	}
 
 	netif_start_queue(dev);
 	return 0;
+
+setting_mac_address_failed:
+	free_irq(sp->pdev->irq, dev);
+isr_registration_failed:
+	del_timer_sync(&sp->alarm_timer);
+	s2io_reset(sp);
+hw_init_failed:
+	return err;
 }
 
 /**
@@ -2640,16 +3058,15 @@ static int s2io_open(struct net_device *dev)
  *  file on failure.
  */
 
-static int s2io_close(struct net_device *dev)
+int s2io_close(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
-
 	flush_scheduled_work();
 	netif_stop_queue(dev);
 	/* Reset card, kill tasklet and free Tx and Rx buffers. */
 	s2io_card_down(sp);
 
-	free_irq(dev->irq, dev);
+	free_irq(sp->pdev->irq, dev);
 	sp->device_close_flag = TRUE;	/* Device is shut down. */
 	return 0;
 }
@@ -2667,7 +3084,7 @@ static int s2io_close(struct net_device *dev)
  *  0 on success & 1 on failure.
  */
 
-static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -2678,29 +3095,39 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 #ifdef NETIF_F_TSO
 	int mss;
 #endif
+	u16 vlan_tag = 0;
+	int vlan_priority = 0;
 	mac_info_t *mac_control;
 	struct config_param *config;
-	XENA_dev_config_t __iomem *bar0 = sp->bar0;
 
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	DBG_PRINT(TX_DBG, "%s: In S2IO Tx routine\n", dev->name);
+	DBG_PRINT(TX_DBG, "%s: In Neterion Tx routine\n", dev->name);
 	spin_lock_irqsave(&sp->tx_lock, flags);
-
 	if (atomic_read(&sp->card_state) == CARD_DOWN) {
-		DBG_PRINT(ERR_DBG, "%s: Card going down for reset\n",
+		DBG_PRINT(TX_DBG, "%s: Card going down for reset\n",
 			  dev->name);
 		spin_unlock_irqrestore(&sp->tx_lock, flags);
-		return 1;
+		dev_kfree_skb(skb);
+		return 0;
 	}
 
 	queue = 0;
-	put_off = (u16) mac_control->tx_curr_put_info[queue].offset;
-	get_off = (u16) mac_control->tx_curr_get_info[queue].offset;
-	txdp = (TxD_t *) sp->list_info[queue][put_off].list_virt_addr;
 
-	queue_len = mac_control->tx_curr_put_info[queue].fifo_len + 1;
+	/* Get Fifo number to Transmit based on vlan priority */
+	if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+		vlan_tag = vlan_tx_tag_get(skb);
+		vlan_priority = vlan_tag >> 13;
+		queue = config->fifo_mapping[vlan_priority];
+	}
+
+	put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
+	get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
+	txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
+		list_virt_addr;
+
+	queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
 	/* Avoid "put" pointer going beyond "get" pointer */
 	if (txdp->Host_Control || (((put_off + 1) % queue_len) == get_off)) {
 		DBG_PRINT(ERR_DBG, "Error in xmit, No free TXDs.\n");
@@ -2709,6 +3136,15 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 		spin_unlock_irqrestore(&sp->tx_lock, flags);
 		return 0;
 	}
+
+	/* A buffer with no data will be dropped */
+	if (!skb->len) {
+		DBG_PRINT(TX_DBG, "%s:Buffer has no data..\n", dev->name);
+		dev_kfree_skb(skb);
+		spin_unlock_irqrestore(&sp->tx_lock, flags);
+		return 0;
+	}
+
 #ifdef NETIF_F_TSO
 	mss = skb_shinfo(skb)->tso_size;
 	if (mss) {
@@ -2720,9 +3156,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	frg_cnt = skb_shinfo(skb)->nr_frags;
 	frg_len = skb->len - skb->data_len;
 
-	txdp->Host_Control = (unsigned long) skb;
 	txdp->Buffer_Pointer = pci_map_single
 	    (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE);
+	txdp->Host_Control = (unsigned long) skb;
 	if (skb->ip_summed == CHECKSUM_HW) {
 		txdp->Control_2 |=
 		    (TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
@@ -2731,6 +3167,11 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 
 	txdp->Control_2 |= config->tx_intr_type;
 
+	if (sp->vlgrp && vlan_tx_tag_present(skb)) {
+		txdp->Control_2 |= TXD_VLAN_ENABLE;
+		txdp->Control_2 |= TXD_VLAN_TAG(vlan_tag);
+	}
+
 	txdp->Control_1 |= (TXD_BUFFER0_SIZE(frg_len) |
 			    TXD_GATHER_CODE_FIRST);
 	txdp->Control_1 |= TXD_LIST_OWN_XENA;
@@ -2738,6 +3179,9 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	/* For fragmented SKB. */
 	for (i = 0; i < frg_cnt; i++) {
 		skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+		/* A '0' length fragment will be ignored */
+		if (!frag->size)
+			continue;
 		txdp++;
 		txdp->Buffer_Pointer = (u64) pci_map_page
 		    (sp->pdev, frag->page, frag->page_offset,
@@ -2747,23 +3191,23 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	txdp->Control_1 |= TXD_GATHER_CODE_LAST;
 
 	tx_fifo = mac_control->tx_FIFO_start[queue];
-	val64 = sp->list_info[queue][put_off].list_phy_addr;
+	val64 = mac_control->fifos[queue].list_info[put_off].list_phy_addr;
 	writeq(val64, &tx_fifo->TxDL_Pointer);
 
 	val64 = (TX_FIFO_LAST_TXD_NUM(frg_cnt) | TX_FIFO_FIRST_LIST |
 		 TX_FIFO_LAST_LIST);
+
 #ifdef NETIF_F_TSO
 	if (mss)
 		val64 |= TX_FIFO_SPECIAL_FUNC;
 #endif
 	writeq(val64, &tx_fifo->List_Control);
 
-	/* Perform a PCI read to flush previous writes */
-	val64 = readq(&bar0->general_int_status);
+	mmiowb();
 
 	put_off++;
-	put_off %= mac_control->tx_curr_put_info[queue].fifo_len + 1;
-	mac_control->tx_curr_put_info[queue].offset = put_off;
+	put_off %= mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
+	mac_control->fifos[queue].tx_curr_put_info.offset = put_off;
 
 	/* Avoid "put" pointer going beyond "get" pointer */
 	if (((put_off + 1) % queue_len) == get_off) {
@@ -2779,18 +3223,74 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
 	return 0;
 }
 
+static void
+s2io_alarm_handle(unsigned long data)
+{
+	nic_t *sp = (nic_t *)data;
+
+	alarm_intr_handler(sp);
+	mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
+}
+
+static void s2io_txpic_intr_handle(nic_t *sp)
+{
+	XENA_dev_config_t *bar0 = (XENA_dev_config_t *) sp->bar0;
+	u64 val64;
+
+	val64 = readq(&bar0->pic_int_status);
+	if (val64 & PIC_INT_GPIO) {
+		val64 = readq(&bar0->gpio_int_reg);
+		if ((val64 & GPIO_INT_REG_LINK_DOWN) &&
+		    (val64 & GPIO_INT_REG_LINK_UP)) {
+			val64 |=  GPIO_INT_REG_LINK_DOWN;
+			val64 |= GPIO_INT_REG_LINK_UP;
+			writeq(val64, &bar0->gpio_int_reg);
+			goto masking;
+		}
+
+		if (((sp->last_link_state == LINK_UP) &&
+			(val64 & GPIO_INT_REG_LINK_DOWN)) ||
+		((sp->last_link_state == LINK_DOWN) &&
+		(val64 & GPIO_INT_REG_LINK_UP))) {
+			val64 = readq(&bar0->gpio_int_mask);
+			val64 |=  GPIO_INT_MASK_LINK_DOWN;
+			val64 |= GPIO_INT_MASK_LINK_UP;
+			writeq(val64, &bar0->gpio_int_mask);
+			s2io_set_link((unsigned long)sp);
+		}
+masking:
+		if (sp->last_link_state == LINK_UP) {
+			/*enable down interrupt */
+			val64 = readq(&bar0->gpio_int_mask);
+			/* unmasks link down intr */
+			val64 &=  ~GPIO_INT_MASK_LINK_DOWN;
+			/* masks link up intr */
+			val64 |= GPIO_INT_MASK_LINK_UP;
+			writeq(val64, &bar0->gpio_int_mask);
+		} else {
+			/*enable UP Interrupt */
+			val64 = readq(&bar0->gpio_int_mask);
+			/* unmasks link up interrupt */
+			val64 &= ~GPIO_INT_MASK_LINK_UP;
+			/* masks link down interrupt */
+			val64 |=  GPIO_INT_MASK_LINK_DOWN;
+			writeq(val64, &bar0->gpio_int_mask);
+		}
+	}
+}
+
 /**
  *  s2io_isr - ISR handler of the device .
  *  @irq: the irq of the device.
  *  @dev_id: a void pointer to the dev structure of the NIC.
  *  @pt_regs: pointer to the registers pushed on the stack.
- *  Description:  This function is the ISR handler of the device. It 
- *  identifies the reason for the interrupt and calls the relevant 
- *  service routines. As a contongency measure, this ISR allocates the 
+ *  Description:  This function is the ISR handler of the device. It
+ *  identifies the reason for the interrupt and calls the relevant
+ *  service routines. As a contongency measure, this ISR allocates the
  *  recv buffers, if their numbers are below the panic value which is
  *  presently set to 25% of the original number of rcv buffers allocated.
  *  Return value:
- *   IRQ_HANDLED: will be returned if IRQ was handled by this routine 
+ *   IRQ_HANDLED: will be returned if IRQ was handled by this routine
  *   IRQ_NONE: will be returned if interrupt is not from our device
  */
 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
@@ -2798,40 +3298,31 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
 	struct net_device *dev = (struct net_device *) dev_id;
 	nic_t *sp = dev->priv;
 	XENA_dev_config_t __iomem *bar0 = sp->bar0;
-#ifndef CONFIG_S2IO_NAPI
-	int i, ret;
-#endif
-	u64 reason = 0;
+	int i;
+	u64 reason = 0, val64;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
+	atomic_inc(&sp->isr_cnt);
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	/* 
+	/*
 	 * Identify the cause for interrupt and call the appropriate
 	 * interrupt handler. Causes for the interrupt could be;
 	 * 1. Rx of packet.
 	 * 2. Tx complete.
 	 * 3. Link down.
-	 * 4. Error in any functional blocks of the NIC. 
+	 * 4. Error in any functional blocks of the NIC.
 	 */
 	reason = readq(&bar0->general_int_status);
 
 	if (!reason) {
 		/* The interrupt was not raised by Xena. */
+		atomic_dec(&sp->isr_cnt);
 		return IRQ_NONE;
 	}
 
-	/* If Intr is because of Tx Traffic */
-	if (reason & GEN_INTR_TXTRAFFIC) {
-		tx_intr_handler(sp);
-	}
-
-	/* If Intr is because of an error */
-	if (reason & (GEN_ERROR_INTR))
-		alarm_intr_handler(sp);
-
 #ifdef CONFIG_S2IO_NAPI
 	if (reason & GEN_INTR_RXTRAFFIC) {
 		if (netif_rx_schedule_prep(dev)) {
@@ -2843,17 +3334,43 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
 #else
 	/* If Intr is because of Rx Traffic */
 	if (reason & GEN_INTR_RXTRAFFIC) {
-		rx_intr_handler(sp);
+		/*
+		 * rx_traffic_int reg is an R1 register, writing all 1's
+		 * will ensure that the actual interrupt causing bit get's
+		 * cleared and hence a read can be avoided.
+		 */
+		val64 = 0xFFFFFFFFFFFFFFFFULL;
+		writeq(val64, &bar0->rx_traffic_int);
+		for (i = 0; i < config->rx_ring_num; i++) {
+			rx_intr_handler(&mac_control->rings[i]);
+		}
 	}
 #endif
 
-	/* 
-	 * If the Rx buffer count is below the panic threshold then 
-	 * reallocate the buffers from the interrupt handler itself, 
+	/* If Intr is because of Tx Traffic */
+	if (reason & GEN_INTR_TXTRAFFIC) {
+		/*
+		 * tx_traffic_int reg is an R1 register, writing all 1's
+		 * will ensure that the actual interrupt causing bit get's
+		 * cleared and hence a read can be avoided.
+		 */
+		val64 = 0xFFFFFFFFFFFFFFFFULL;
+		writeq(val64, &bar0->tx_traffic_int);
+
+		for (i = 0; i < config->tx_fifo_num; i++)
+			tx_intr_handler(&mac_control->fifos[i]);
+	}
+
+	if (reason & GEN_INTR_TXPIC)
+		s2io_txpic_intr_handle(sp);
+	/*
+	 * If the Rx buffer count is below the panic threshold then
+	 * reallocate the buffers from the interrupt handler itself,
 	 * else schedule a tasklet to reallocate the buffers.
 	 */
 #ifndef CONFIG_S2IO_NAPI
 	for (i = 0; i < config->rx_ring_num; i++) {
+		int ret;
 		int rxb_size = atomic_read(&sp->rx_bufs_left[i]);
 		int level = rx_buffer_level(sp, rxb_size, i);
 
@@ -2865,6 +3382,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
 					  dev->name);
 				DBG_PRINT(ERR_DBG, " in ISR!!\n");
 				clear_bit(0, (&sp->tasklet_status));
+				atomic_dec(&sp->isr_cnt);
 				return IRQ_HANDLED;
 			}
 			clear_bit(0, (&sp->tasklet_status));
@@ -2874,33 +3392,69 @@ static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs)
 	}
 #endif
 
+	atomic_dec(&sp->isr_cnt);
 	return IRQ_HANDLED;
 }
 
 /**
- *  s2io_get_stats - Updates the device statistics structure. 
+ * s2io_updt_stats -
+ */
+static void s2io_updt_stats(nic_t *sp)
+{
+	XENA_dev_config_t __iomem *bar0 = sp->bar0;
+	u64 val64;
+	int cnt = 0;
+
+	if (atomic_read(&sp->card_state) == CARD_UP) {
+		/* Apprx 30us on a 133 MHz bus */
+		val64 = SET_UPDT_CLICKS(10) |
+			STAT_CFG_ONE_SHOT_EN | STAT_CFG_STAT_EN;
+		writeq(val64, &bar0->stat_cfg);
+		do {
+			udelay(100);
+			val64 = readq(&bar0->stat_cfg);
+			if (!(val64 & BIT(0)))
+				break;
+			cnt++;
+			if (cnt == 5)
+				break; /* Updt failed */
+		} while(1);
+	}
+}
+
+/**
+ *  s2io_get_stats - Updates the device statistics structure.
  *  @dev : pointer to the device structure.
  *  Description:
- *  This function updates the device statistics structure in the s2io_nic 
+ *  This function updates the device statistics structure in the s2io_nic
  *  structure and returns a pointer to the same.
  *  Return value:
  *  pointer to the updated net_device_stats structure.
  */
 
-static struct net_device_stats *s2io_get_stats(struct net_device *dev)
+struct net_device_stats *s2io_get_stats(struct net_device *dev)
 {
 	nic_t *sp = dev->priv;
 	mac_info_t *mac_control;
 	struct config_param *config;
 
+
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
-	sp->stats.tx_errors = mac_control->stats_info->tmac_any_err_frms;
-	sp->stats.rx_errors = mac_control->stats_info->rmac_drop_frms;
-	sp->stats.multicast = mac_control->stats_info->rmac_vld_mcst_frms;
+	/* Configure Stats for immediate updt */
+	s2io_updt_stats(sp);
+
+	sp->stats.tx_packets =
+		le32_to_cpu(mac_control->stats_info->tmac_frms);
+	sp->stats.tx_errors =
+		le32_to_cpu(mac_control->stats_info->tmac_any_err_frms);
+	sp->stats.rx_errors =
+		le32_to_cpu(mac_control->stats_info->rmac_drop_frms);
+	sp->stats.multicast =
+		le32_to_cpu(mac_control->stats_info->rmac_vld_mcst_frms);
 	sp->stats.rx_length_errors =
-	    mac_control->stats_info->rmac_long_frms;
+		le32_to_cpu(mac_control->stats_info->rmac_long_frms);
 
 	return (&sp->stats);
 }
@@ -2909,8 +3463,8 @@ static struct net_device_stats *s2io_get_stats(struct net_device *dev)
  *  s2io_set_multicast - entry point for multicast address enable/disable.
  *  @dev : pointer to the device structure
  *  Description:
- *  This function is a driver entry point which gets called by the kernel 
- *  whenever multicast addresses must be enabled/disabled. This also gets 
+ *  This function is a driver entry point which gets called by the kernel
+ *  whenever multicast addresses must be enabled/disabled. This also gets
  *  called to set/reset promiscuous mode. Depending on the deivce flag, we
  *  determine, if multicast address must be enabled or if promiscuous mode
  *  is to be disabled etc.
@@ -2948,6 +3502,8 @@ static void s2io_set_multicast(struct net_device *dev)
 		/*  Disable all Multicast addresses */
 		writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
 		       &bar0->rmac_addr_data0_mem);
+		writeq(RMAC_ADDR_DATA1_MEM_MASK(0x0),
+		       &bar0->rmac_addr_data1_mem);
 		val64 = RMAC_ADDR_CMD_MEM_WE |
 		    RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 		    RMAC_ADDR_CMD_MEM_OFFSET(sp->all_multi_pos);
@@ -3010,7 +3566,7 @@ static void s2io_set_multicast(struct net_device *dev)
 			writeq(RMAC_ADDR_DATA0_MEM_ADDR(dis_addr),
 			       &bar0->rmac_addr_data0_mem);
 			writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
-		       		&bar0->rmac_addr_data1_mem);
+				&bar0->rmac_addr_data1_mem);
 			val64 = RMAC_ADDR_CMD_MEM_WE |
 			    RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 			    RMAC_ADDR_CMD_MEM_OFFSET
@@ -3039,8 +3595,7 @@ static void s2io_set_multicast(struct net_device *dev)
 			writeq(RMAC_ADDR_DATA0_MEM_ADDR(mac_addr),
 			       &bar0->rmac_addr_data0_mem);
 			writeq(RMAC_ADDR_DATA1_MEM_MASK(0ULL),
-		       		&bar0->rmac_addr_data1_mem);
-
+				&bar0->rmac_addr_data1_mem);
 			val64 = RMAC_ADDR_CMD_MEM_WE |
 			    RMAC_ADDR_CMD_MEM_STROBE_NEW_CMD |
 			    RMAC_ADDR_CMD_MEM_OFFSET
@@ -3059,12 +3614,12 @@ static void s2io_set_multicast(struct net_device *dev)
 }
 
 /**
- *  s2io_set_mac_addr - Programs the Xframe mac address 
+ *  s2io_set_mac_addr - Programs the Xframe mac address
  *  @dev : pointer to the device structure.
  *  @addr: a uchar pointer to the new mac address which is to be set.
- *  Description : This procedure will program the Xframe to receive 
+ *  Description : This procedure will program the Xframe to receive
  *  frames with new Mac Address
- *  Return value: SUCCESS on success and an appropriate (-)ve integer 
+ *  Return value: SUCCESS on success and an appropriate (-)ve integer
  *  as defined in errno.h file on failure.
  */
 
@@ -3075,10 +3630,10 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
 	register u64 val64, mac_addr = 0;
 	int i;
 
-	/* 
+	/*
 	 * Set the new MAC address as the new unicast filter and reflect this
 	 * change on the device address registered with the OS. It will be
-	 * at offset 0. 
+	 * at offset 0.
 	 */
 	for (i = 0; i < ETH_ALEN; i++) {
 		mac_addr <<= 8;
@@ -3102,12 +3657,12 @@ int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
 }
 
 /**
- * s2io_ethtool_sset - Sets different link parameters. 
+ * s2io_ethtool_sset - Sets different link parameters.
  * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
  * @info: pointer to the structure with parameters given by ethtool to set
  * link information.
  * Description:
- * The function sets different link parameters provided by the user onto 
+ * The function sets different link parameters provided by the user onto
  * the NIC.
  * Return value:
  * 0 on success.
@@ -3129,7 +3684,7 @@ static int s2io_ethtool_sset(struct net_device *dev,
 }
 
 /**
- * s2io_ethtol_gset - Return link specific information. 
+ * s2io_ethtol_gset - Return link specific information.
  * @sp : private member of the device structure, pointer to the
  *      s2io_nic structure.
  * @info : pointer to the structure with parameters given by ethtool
@@ -3161,8 +3716,8 @@ static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
 }
 
 /**
- * s2io_ethtool_gdrvinfo - Returns driver specific information. 
- * @sp : private member of the device structure, which is a pointer to the 
+ * s2io_ethtool_gdrvinfo - Returns driver specific information.
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @info : pointer to the structure with parameters given by ethtool to
  * return driver information.
@@ -3190,9 +3745,9 @@ static void s2io_ethtool_gdrvinfo(struct net_device *dev,
 
 /**
  *  s2io_ethtool_gregs - dumps the entire space of Xfame into the buffer.
- *  @sp: private member of the device structure, which is a pointer to the 
+ *  @sp: private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  @regs : pointer to the structure with parameters given by ethtool for 
+ *  @regs : pointer to the structure with parameters given by ethtool for
  *  dumping the registers.
  *  @reg_space: The input argumnet into which all the registers are dumped.
  *  Description:
@@ -3221,11 +3776,11 @@ static void s2io_ethtool_gregs(struct net_device *dev,
 
 /**
  *  s2io_phy_id  - timer function that alternates adapter LED.
- *  @data : address of the private member of the device structure, which 
+ *  @data : address of the private member of the device structure, which
  *  is a pointer to the s2io_nic structure, provided as an u32.
- * Description: This is actually the timer function that alternates the 
- * adapter LED bit of the adapter control bit to set/reset every time on 
- * invocation. The timer is set for 1/2 a second, hence tha NIC blinks 
+ * Description: This is actually the timer function that alternates the
+ * adapter LED bit of the adapter control bit to set/reset every time on
+ * invocation. The timer is set for 1/2 a second, hence tha NIC blinks
  *  once every second.
 */
 static void s2io_phy_id(unsigned long data)
@@ -3236,7 +3791,8 @@ static void s2io_phy_id(unsigned long data)
 	u16 subid;
 
 	subid = sp->pdev->subsystem_device;
-	if ((subid & 0xFF) >= 0x07) {
+	if ((sp->device_type == XFRAME_II_DEVICE) ||
+		   ((subid & 0xFF) >= 0x07)) {
 		val64 = readq(&bar0->gpio_control);
 		val64 ^= GPIO_CTRL_GPIO_0;
 		writeq(val64, &bar0->gpio_control);
@@ -3253,12 +3809,12 @@ static void s2io_phy_id(unsigned long data)
  * s2io_ethtool_idnic - To physically identify the nic on the system.
  * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @id : pointer to the structure with identification parameters given by 
+ * @id : pointer to the structure with identification parameters given by
  * ethtool.
  * Description: Used to physically identify the NIC on the system.
- * The Link LED will blink for a time specified by the user for 
+ * The Link LED will blink for a time specified by the user for
  * identification.
- * NOTE: The Link has to be Up to be able to blink the LED. Hence 
+ * NOTE: The Link has to be Up to be able to blink the LED. Hence
  * identification is possible only if it's link is up.
  * Return value:
  * int , returns 0 on success
@@ -3273,7 +3829,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
 
 	subid = sp->pdev->subsystem_device;
 	last_gpio_ctrl_val = readq(&bar0->gpio_control);
-	if ((subid & 0xFF) < 0x07) {
+	if ((sp->device_type == XFRAME_I_DEVICE) &&
+		((subid & 0xFF) < 0x07)) {
 		val64 = readq(&bar0->adapter_control);
 		if (!(val64 & ADAPTER_CNTL_EN)) {
 			printk(KERN_ERR
@@ -3288,12 +3845,12 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
 	}
 	mod_timer(&sp->id_timer, jiffies);
 	if (data)
-		msleep(data * 1000);
+		msleep_interruptible(data * HZ);
 	else
-		msleep(0xFFFFFFFF);
+		msleep_interruptible(MAX_FLICKER_TIME);
 	del_timer_sync(&sp->id_timer);
 
-	if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+	if (CARDS_WITH_FAULTY_LINK_INDICATORS(sp->device_type, subid)) {
 		writeq(last_gpio_ctrl_val, &bar0->gpio_control);
 		last_gpio_ctrl_val = readq(&bar0->gpio_control);
 	}
@@ -3303,7 +3860,8 @@ static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
 
 /**
  * s2io_ethtool_getpause_data -Pause frame frame generation and reception.
- * @sp : private member of the device structure, which is a pointer to the  * s2io_nic structure.
+ * @sp : private member of the device structure, which is a pointer to the
+ *	s2io_nic structure.
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
  * Returns the Pause frame generation and reception capability of the NIC.
@@ -3327,7 +3885,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
 
 /**
  * s2io_ethtool_setpause_data -  set/reset pause frame generation.
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  *      s2io_nic structure.
  * @ep : pointer to the structure with pause parameters given by ethtool.
  * Description:
@@ -3338,7 +3896,7 @@ static void s2io_ethtool_getpause_data(struct net_device *dev,
  */
 
 static int s2io_ethtool_setpause_data(struct net_device *dev,
-				      struct ethtool_pauseparam *ep)
+			       struct ethtool_pauseparam *ep)
 {
 	u64 val64;
 	nic_t *sp = dev->priv;
@@ -3359,13 +3917,13 @@ static int s2io_ethtool_setpause_data(struct net_device *dev,
 
 /**
  * read_eeprom - reads 4 bytes of data from user given offset.
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  *      s2io_nic structure.
  * @off : offset at which the data must be written
  * @data : Its an output parameter where the data read at the given
- * 	offset is stored.
+ *	offset is stored.
  * Description:
- * Will read 4 bytes of data from the user given offset and return the 
+ * Will read 4 bytes of data from the user given offset and return the
  * read data.
  * NOTE: Will allow to read only part of the EEPROM visible through the
  *   I2C bus.
@@ -3406,7 +3964,7 @@ static int read_eeprom(nic_t * sp, int off, u32 * data)
  *       s2io_nic structure.
  *  @off : offset at which the data must be written
  *  @data : The data that is to be written
- *  @cnt : Number of bytes of the data that are actually to be written into 
+ *  @cnt : Number of bytes of the data that are actually to be written into
  *  the Eeprom. (max of 3)
  * Description:
  *  Actually writes the relevant part of the data value into the Eeprom
@@ -3443,7 +4001,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
 /**
  *  s2io_ethtool_geeprom  - reads the value stored in the Eeprom.
  *  @sp : private member of the device structure, which is a pointer to the *       s2io_nic structure.
- *  @eeprom : pointer to the user level structure provided by ethtool, 
+ *  @eeprom : pointer to the user level structure provided by ethtool,
  *  containing all relevant information.
  *  @data_buf : user defined value to be written into Eeprom.
  *  Description: Reads the values stored in the Eeprom at given offset
@@ -3454,7 +4012,7 @@ static int write_eeprom(nic_t * sp, int off, u32 data, int cnt)
  */
 
 static int s2io_ethtool_geeprom(struct net_device *dev,
-				struct ethtool_eeprom *eeprom, u8 * data_buf)
+			 struct ethtool_eeprom *eeprom, u8 * data_buf)
 {
 	u32 data, i, valid;
 	nic_t *sp = dev->priv;
@@ -3479,7 +4037,7 @@ static int s2io_ethtool_geeprom(struct net_device *dev,
  *  s2io_ethtool_seeprom - tries to write the user provided value in Eeprom
  *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
- *  @eeprom : pointer to the user level structure provided by ethtool, 
+ *  @eeprom : pointer to the user level structure provided by ethtool,
  *  containing all relevant information.
  *  @data_buf ; user defined value to be written into Eeprom.
  *  Description:
@@ -3527,8 +4085,8 @@ static int s2io_ethtool_seeprom(struct net_device *dev,
 }
 
 /**
- * s2io_register_test - reads and writes into all clock domains. 
- * @sp : private member of the device structure, which is a pointer to the 
+ * s2io_register_test - reads and writes into all clock domains.
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data : variable that returns the result of each of the test conducted b
  * by the driver.
@@ -3545,8 +4103,8 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
 	u64 val64 = 0;
 	int fail = 0;
 
-	val64 = readq(&bar0->pcc_enable);
-	if (val64 != 0xff00000000000000ULL) {
+	val64 = readq(&bar0->pif_rd_swapper_fb);
+	if (val64 != 0x123456789abcdefULL) {
 		fail = 1;
 		DBG_PRINT(INFO_DBG, "Read Test level 1 fails\n");
 	}
@@ -3590,13 +4148,13 @@ static int s2io_register_test(nic_t * sp, uint64_t * data)
 }
 
 /**
- * s2io_eeprom_test - to verify that EEprom in the xena can be programmed. 
+ * s2io_eeprom_test - to verify that EEprom in the xena can be programmed.
  * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data:variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
- * Verify that EEPROM in the xena can be programmed using I2C_CONTROL 
+ * Verify that EEPROM in the xena can be programmed using I2C_CONTROL
  * register.
  * Return value:
  * 0 on success.
@@ -3661,14 +4219,14 @@ static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
 
 /**
  * s2io_bist_test - invokes the MemBist test of the card .
- * @sp : private member of the device structure, which is a pointer to the 
+ * @sp : private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @data:variable that returns the result of each of the test conducted by 
+ * @data:variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
  * This invokes the MemBist test of the card. We give around
  * 2 secs time for the Test to complete. If it's still not complete
- * within this peiod, we consider that the test failed. 
+ * within this peiod, we consider that the test failed.
  * Return value:
  * 0 on success and -1 on failure.
  */
@@ -3697,13 +4255,13 @@ static int s2io_bist_test(nic_t * sp, uint64_t * data)
 }
 
 /**
- * s2io-link_test - verifies the link state of the nic  
- * @sp ; private member of the device structure, which is a pointer to the 
+ * s2io-link_test - verifies the link state of the nic
+ * @sp ; private member of the device structure, which is a pointer to the
  * s2io_nic structure.
  * @data: variable that returns the result of each of the test conducted by
  * the driver.
  * Description:
- * The function verifies the link state of the NIC and updates the input 
+ * The function verifies the link state of the NIC and updates the input
  * argument 'data' appropriately.
  * Return value:
  * 0 on success.
@@ -3722,13 +4280,13 @@ static int s2io_link_test(nic_t * sp, uint64_t * data)
 }
 
 /**
- * s2io_rldram_test - offline test for access to the RldRam chip on the NIC 
- * @sp - private member of the device structure, which is a pointer to the  
+ * s2io_rldram_test - offline test for access to the RldRam chip on the NIC
+ * @sp - private member of the device structure, which is a pointer to the
  * s2io_nic structure.
- * @data - variable that returns the result of each of the test 
+ * @data - variable that returns the result of each of the test
  * conducted by the driver.
  * Description:
- *  This is one of the offline test that tests the read and write 
+ *  This is one of the offline test that tests the read and write
  *  access to the RldRam chip on the NIC.
  * Return value:
  *  0 on success.
@@ -3833,7 +4391,7 @@ static int s2io_rldram_test(nic_t * sp, uint64_t * data)
  *  s2io_nic structure.
  *  @ethtest : pointer to a ethtool command specific structure that will be
  *  returned to the user.
- *  @data : variable that returns the result of each of the test 
+ *  @data : variable that returns the result of each of the test
  * conducted by the driver.
  * Description:
  *  This function conducts 6 tests ( 4 offline and 2 online) to determine
@@ -3851,23 +4409,18 @@ static void s2io_ethtool_test(struct net_device *dev,
 
 	if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
 		/* Offline Tests. */
-		if (orig_state) {
+		if (orig_state)
 			s2io_close(sp->dev);
-			s2io_set_swapper(sp);
-		} else
-			s2io_set_swapper(sp);
 
 		if (s2io_register_test(sp, &data[0]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
 
 		s2io_reset(sp);
-		s2io_set_swapper(sp);
 
 		if (s2io_rldram_test(sp, &data[3]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
 
 		s2io_reset(sp);
-		s2io_set_swapper(sp);
 
 		if (s2io_eeprom_test(sp, &data[1]))
 			ethtest->flags |= ETH_TEST_FL_FAILED;
@@ -3910,61 +4463,111 @@ static void s2io_get_ethtool_stats(struct net_device *dev,
 	nic_t *sp = dev->priv;
 	StatInfo_t *stat_info = sp->mac_control.stats_info;
 
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_data_octets);
+	s2io_updt_stats(sp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_frms_oflow) << 32  |
+		le32_to_cpu(stat_info->tmac_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_data_octets_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_data_octets);
 	tmp_stats[i++] = le64_to_cpu(stat_info->tmac_drop_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_mcst_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_bcst_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_mcst_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_mcst_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_bcst_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_bcst_frms);
 	tmp_stats[i++] = le64_to_cpu(stat_info->tmac_pause_ctrl_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_any_err_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_any_err_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_any_err_frms);
 	tmp_stats[i++] = le64_to_cpu(stat_info->tmac_vld_ip_octets);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_vld_ip);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_drop_ip);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_icmp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_rst_tcp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_vld_ip_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_vld_ip);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_drop_ip_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_drop_ip);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_icmp_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_icmp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->tmac_rst_tcp_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_rst_tcp);
 	tmp_stats[i++] = le64_to_cpu(stat_info->tmac_tcp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->tmac_udp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_data_octets);
+	tmp_stats[i++] = (u64)le32_to_cpu(stat_info->tmac_udp_oflow) << 32 |
+		le32_to_cpu(stat_info->tmac_udp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_vld_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_vld_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_data_octets_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_data_octets);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_fcs_err_frms);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_drop_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_mcst_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_vld_bcst_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_vld_mcst_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_vld_mcst_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_vld_bcst_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_vld_bcst_frms);
 	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_in_rng_len_err_frms);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_long_frms);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_pause_ctrl_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_discarded_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_usized_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_osized_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_frag_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_jabber_frms);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_ip);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_discarded_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_discarded_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_usized_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_usized_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_osized_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_osized_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_frag_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_frag_frms);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_jabber_frms_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_jabber_frms);
+	tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_ip_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_ip);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_ip_octets);
 	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_hdr_err_ip);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_drop_ip);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_icmp);
+	tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_drop_ip_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_drop_ip);
+	tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_icmp_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_icmp);
 	tmp_stats[i++] = le64_to_cpu(stat_info->rmac_tcp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_udp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_drp_udp);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_pause_cnt);
-	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_accepted_ip);
+	tmp_stats[i++] = (u64)le32_to_cpu(stat_info->rmac_udp_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_udp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_err_drp_udp_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_err_drp_udp);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_pause_cnt_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_pause_cnt);
+	tmp_stats[i++] =
+		(u64)le32_to_cpu(stat_info->rmac_accepted_ip_oflow) << 32 |
+		le32_to_cpu(stat_info->rmac_accepted_ip);
 	tmp_stats[i++] = le32_to_cpu(stat_info->rmac_err_tcp);
+	tmp_stats[i++] = 0;
+	tmp_stats[i++] = stat_info->sw_stat.single_ecc_errs;
+	tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
 }
 
-static int s2io_ethtool_get_regs_len(struct net_device *dev)
+int s2io_ethtool_get_regs_len(struct net_device *dev)
 {
 	return (XENA_REG_SPACE);
 }
 
 
-static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
 {
 	nic_t *sp = dev->priv;
 
 	return (sp->rx_csum);
 }
-
-static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 {
 	nic_t *sp = dev->priv;
 
@@ -3975,19 +4578,17 @@ static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
 
 	return 0;
 }
-
-static int s2io_get_eeprom_len(struct net_device *dev)
+int s2io_get_eeprom_len(struct net_device *dev)
 {
 	return (XENA_EEPROM_SPACE);
 }
 
-static int s2io_ethtool_self_test_count(struct net_device *dev)
+int s2io_ethtool_self_test_count(struct net_device *dev)
 {
 	return (S2IO_TEST_LEN);
 }
-
-static void s2io_ethtool_get_strings(struct net_device *dev,
-				     u32 stringset, u8 * data)
+void s2io_ethtool_get_strings(struct net_device *dev,
+			      u32 stringset, u8 * data)
 {
 	switch (stringset) {
 	case ETH_SS_TEST:
@@ -3998,13 +4599,12 @@ static void s2io_ethtool_get_strings(struct net_device *dev,
 		       sizeof(ethtool_stats_keys));
 	}
 }
-
 static int s2io_ethtool_get_stats_count(struct net_device *dev)
 {
 	return (S2IO_STAT_LEN);
 }
 
-static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
 {
 	if (data)
 		dev->features |= NETIF_F_IP_CSUM;
@@ -4046,21 +4646,18 @@ static struct ethtool_ops netdev_ethtool_ops = {
 };
 
 /**
- *  s2io_ioctl - Entry point for the Ioctl 
+ *  s2io_ioctl - Entry point for the Ioctl
  *  @dev :  Device pointer.
  *  @ifr :  An IOCTL specefic structure, that can contain a pointer to
  *  a proprietary structure used to pass information to the driver.
  *  @cmd :  This is used to distinguish between the different commands that
  *  can be passed to the IOCTL functions.
  *  Description:
- *  This function has support for ethtool, adding multiple MAC addresses on 
- *  the NIC and some DBG commands for the util tool.
- *  Return value:
- *  Currently the IOCTL supports no operations, hence by default this
- *  function returns OP NOT SUPPORTED value.
+ *  Currently there are no special functionality supported in IOCTL, hence
+ *  function always return EOPNOTSUPPORTED
  */
 
-static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
 {
 	return -EOPNOTSUPP;
 }
@@ -4076,17 +4673,9 @@ static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
  *   file on failure.
  */
 
-static int s2io_change_mtu(struct net_device *dev, int new_mtu)
+int s2io_change_mtu(struct net_device *dev, int new_mtu)
 {
 	nic_t *sp = dev->priv;
-	XENA_dev_config_t __iomem *bar0 = sp->bar0;
-	register u64 val64;
-
-	if (netif_running(dev)) {
-		DBG_PRINT(ERR_DBG, "%s: Must be stopped to ", dev->name);
-		DBG_PRINT(ERR_DBG, "change its MTU \n");
-		return -EBUSY;
-	}
 
 	if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
 		DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
@@ -4094,11 +4683,22 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
 		return -EPERM;
 	}
 
-	/* Set the new MTU into the PYLD register of the NIC */
-	val64 = new_mtu;
-	writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
-
 	dev->mtu = new_mtu;
+	if (netif_running(dev)) {
+		s2io_card_down(sp);
+		netif_stop_queue(dev);
+		if (s2io_card_up(sp)) {
+			DBG_PRINT(ERR_DBG, "%s: Device bring up failed\n",
+				  __FUNCTION__);
+		}
+		if (netif_queue_stopped(dev))
+			netif_wake_queue(dev);
+	} else { /* Device is down */
+		XENA_dev_config_t __iomem *bar0 = sp->bar0;
+		u64 val64 = new_mtu;
+
+		writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
+	}
 
 	return 0;
 }
@@ -4108,9 +4708,9 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
  *  @dev_adr : address of the device structure in dma_addr_t format.
  *  Description:
  *  This is the tasklet or the bottom half of the ISR. This is
- *  an extension of the ISR which is scheduled by the scheduler to be run 
+ *  an extension of the ISR which is scheduled by the scheduler to be run
  *  when the load on the CPU is low. All low priority tasks of the ISR can
- *  be pushed into the tasklet. For now the tasklet is used only to 
+ *  be pushed into the tasklet. For now the tasklet is used only to
  *  replenish the Rx buffers in the Rx buffer descriptors.
  *  Return value:
  *  void.
@@ -4166,19 +4766,22 @@ static void s2io_set_link(unsigned long data)
 	}
 
 	subid = nic->pdev->subsystem_device;
-	/* 
-	 * Allow a small delay for the NICs self initiated 
-	 * cleanup to complete.
-	 */
-	msleep(100);
+	if (s2io_link_fault_indication(nic) == MAC_RMAC_ERR_TIMER) {
+		/*
+		 * Allow a small delay for the NICs self initiated
+		 * cleanup to complete.
+		 */
+		msleep(100);
+	}
 
 	val64 = readq(&bar0->adapter_status);
-	if (verify_xena_quiescence(val64, nic->device_enabled_once)) {
+	if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
 		if (LINK_IS_UP(val64)) {
 			val64 = readq(&bar0->adapter_control);
 			val64 |= ADAPTER_CNTL_EN;
 			writeq(val64, &bar0->adapter_control);
-			if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+			if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+							     subid)) {
 				val64 = readq(&bar0->gpio_control);
 				val64 |= GPIO_CTRL_GPIO_0;
 				writeq(val64, &bar0->gpio_control);
@@ -4187,20 +4790,24 @@ static void s2io_set_link(unsigned long data)
 				val64 |= ADAPTER_LED_ON;
 				writeq(val64, &bar0->adapter_control);
 			}
-			val64 = readq(&bar0->adapter_status);
-			if (!LINK_IS_UP(val64)) {
-				DBG_PRINT(ERR_DBG, "%s:", dev->name);
-				DBG_PRINT(ERR_DBG, " Link down");
-				DBG_PRINT(ERR_DBG, "after ");
-				DBG_PRINT(ERR_DBG, "enabling ");
-				DBG_PRINT(ERR_DBG, "device \n");
+			if (s2io_link_fault_indication(nic) ==
+						MAC_RMAC_ERR_TIMER) {
+				val64 = readq(&bar0->adapter_status);
+				if (!LINK_IS_UP(val64)) {
+					DBG_PRINT(ERR_DBG, "%s:", dev->name);
+					DBG_PRINT(ERR_DBG, " Link down");
+					DBG_PRINT(ERR_DBG, "after ");
+					DBG_PRINT(ERR_DBG, "enabling ");
+					DBG_PRINT(ERR_DBG, "device \n");
+				}
 			}
 			if (nic->device_enabled_once == FALSE) {
 				nic->device_enabled_once = TRUE;
 			}
 			s2io_link(nic, LINK_UP);
 		} else {
-			if (CARDS_WITH_FAULTY_LINK_INDICATORS(subid)) {
+			if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+							      subid)) {
 				val64 = readq(&bar0->gpio_control);
 				val64 &= ~GPIO_CTRL_GPIO_0;
 				writeq(val64, &bar0->gpio_control);
@@ -4223,9 +4830,11 @@ static void s2io_card_down(nic_t * sp)
 	unsigned long flags;
 	register u64 val64 = 0;
 
+	del_timer_sync(&sp->alarm_timer);
 	/* If s2io_set_link task is executing, wait till it completes. */
-	while (test_and_set_bit(0, &(sp->link_state)))
+	while (test_and_set_bit(0, &(sp->link_state))) {
 		msleep(50);
+	}
 	atomic_set(&sp->card_state, CARD_DOWN);
 
 	/* disable Tx and Rx traffic on the NIC */
@@ -4237,7 +4846,7 @@ static void s2io_card_down(nic_t * sp)
 	/* Check if the device is Quiescent and then Reset the NIC */
 	do {
 		val64 = readq(&bar0->adapter_status);
-		if (verify_xena_quiescence(val64, sp->device_enabled_once)) {
+		if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
 			break;
 		}
 
@@ -4251,14 +4860,27 @@ static void s2io_card_down(nic_t * sp)
 			break;
 		}
 	} while (1);
-	spin_lock_irqsave(&sp->tx_lock, flags);
 	s2io_reset(sp);
 
-	/* Free all unused Tx and Rx buffers */
+	/* Waiting till all Interrupt handlers are complete */
+	cnt = 0;
+	do {
+		msleep(10);
+		if (!atomic_read(&sp->isr_cnt))
+			break;
+		cnt++;
+	} while(cnt < 5);
+
+	spin_lock_irqsave(&sp->tx_lock, flags);
+	/* Free all Tx buffers */
 	free_tx_buffers(sp);
+	spin_unlock_irqrestore(&sp->tx_lock, flags);
+
+	/* Free all Rx buffers */
+	spin_lock_irqsave(&sp->rx_lock, flags);
 	free_rx_buffers(sp);
+	spin_unlock_irqrestore(&sp->rx_lock, flags);
 
-	spin_unlock_irqrestore(&sp->tx_lock, flags);
 	clear_bit(0, &(sp->link_state));
 }
 
@@ -4276,8 +4898,8 @@ static int s2io_card_up(nic_t * sp)
 		return -ENODEV;
 	}
 
-	/* 
-	 * Initializing the Rx buffers. For now we are considering only 1 
+	/*
+	 * Initializing the Rx buffers. For now we are considering only 1
 	 * Rx ring and initializing buffers into 30 Rx blocks
 	 */
 	mac_control = &sp->mac_control;
@@ -4311,16 +4933,18 @@ static int s2io_card_up(nic_t * sp)
 		return -ENODEV;
 	}
 
+	S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
+
 	atomic_set(&sp->card_state, CARD_UP);
 	return 0;
 }
 
-/** 
+/**
  * s2io_restart_nic - Resets the NIC.
  * @data : long pointer to the device private structure
  * Description:
  * This function is scheduled to be run by the s2io_tx_watchdog
- * function after 0.5 secs to reset the NIC. The idea is to reduce 
+ * function after 0.5 secs to reset the NIC. The idea is to reduce
  * the run time of the watch dog routine which is run holding a
  * spin lock.
  */
@@ -4338,10 +4962,11 @@ static void s2io_restart_nic(unsigned long data)
 	netif_wake_queue(dev);
 	DBG_PRINT(ERR_DBG, "%s: was reset by Tx watchdog timer\n",
 		  dev->name);
+
 }
 
-/** 
- *  s2io_tx_watchdog - Watchdog for transmit side. 
+/**
+ *  s2io_tx_watchdog - Watchdog for transmit side.
  *  @dev : Pointer to net device structure
  *  Description:
  *  This function is triggered if the Tx Queue is stopped
@@ -4369,7 +4994,7 @@ static void s2io_tx_watchdog(struct net_device *dev)
  *   @len : length of the packet
  *   @cksum : FCS checksum of the frame.
  *   @ring_no : the ring from which this RxD was extracted.
- *   Description: 
+ *   Description:
  *   This function is called by the Tx interrupt serivce routine to perform
  *   some OS related operations on the SKB before passing it to the upper
  *   layers. It mainly checks if the checksum is OK, if so adds it to the
@@ -4379,35 +5004,68 @@ static void s2io_tx_watchdog(struct net_device *dev)
  *   Return value:
  *   SUCCESS on success and -1 on failure.
  */
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no)
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
-			  buffAdd_t * ba)
-#endif
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
 {
+	nic_t *sp = ring_data->nic;
 	struct net_device *dev = (struct net_device *) sp->dev;
-	struct sk_buff *skb =
-	    (struct sk_buff *) ((unsigned long) rxdp->Host_Control);
+	struct sk_buff *skb = (struct sk_buff *)
+		((unsigned long) rxdp->Host_Control);
+	int ring_no = ring_data->ring_no;
 	u16 l3_csum, l4_csum;
 #ifdef CONFIG_2BUFF_MODE
-	int buf0_len, buf2_len;
+	int buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
+	int buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
+	int get_block = ring_data->rx_curr_get_info.block_index;
+	int get_off = ring_data->rx_curr_get_info.offset;
+	buffAdd_t *ba = &ring_data->ba[get_block][get_off];
 	unsigned char *buff;
+#else
+	u16 len = (u16) ((RXD_GET_BUFFER0_SIZE(rxdp->Control_2)) >> 48);;
 #endif
+	skb->dev = dev;
+	if (rxdp->Control_1 & RXD_T_CODE) {
+		unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
+		DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
+			  dev->name, err);
+		dev_kfree_skb(skb);
+		sp->stats.rx_crc_errors++;
+		atomic_dec(&sp->rx_bufs_left[ring_no]);
+		rxdp->Host_Control = 0;
+		return 0;
+	}
 
-	l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
-	if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) && (sp->rx_csum)) {
+	/* Updating statistics */
+	rxdp->Host_Control = 0;
+	sp->rx_pkt_count++;
+	sp->stats.rx_packets++;
+#ifndef CONFIG_2BUFF_MODE
+	sp->stats.rx_bytes += len;
+#else
+	sp->stats.rx_bytes += buf0_len + buf2_len;
+#endif
+
+#ifndef CONFIG_2BUFF_MODE
+	skb_put(skb, len);
+#else
+	buff = skb_push(skb, buf0_len);
+	memcpy(buff, ba->ba_0, buf0_len);
+	skb_put(skb, buf2_len);
+#endif
+
+	if ((rxdp->Control_1 & TCP_OR_UDP_FRAME) &&
+	    (sp->rx_csum)) {
+		l3_csum = RXD_GET_L3_CKSUM(rxdp->Control_1);
 		l4_csum = RXD_GET_L4_CKSUM(rxdp->Control_1);
 		if ((l3_csum == L3_CKSUM_OK) && (l4_csum == L4_CKSUM_OK)) {
-			/* 
+			/*
 			 * NIC verifies if the Checksum of the received
 			 * frame is Ok or not and accordingly returns
 			 * a flag in the RxD.
 			 */
 			skb->ip_summed = CHECKSUM_UNNECESSARY;
 		} else {
-			/* 
-			 * Packet with erroneous checksum, let the 
+			/*
+			 * Packet with erroneous checksum, let the
 			 * upper layers deal with it.
 			 */
 			skb->ip_summed = CHECKSUM_NONE;
@@ -4416,44 +5074,26 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
 		skb->ip_summed = CHECKSUM_NONE;
 	}
 
-	if (rxdp->Control_1 & RXD_T_CODE) {
-		unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
-		DBG_PRINT(ERR_DBG, "%s: Rx error Value: 0x%llx\n",
-			  dev->name, err);
-	}
-#ifdef CONFIG_2BUFF_MODE
-	buf0_len = RXD_GET_BUFFER0_SIZE(rxdp->Control_2);
-	buf2_len = RXD_GET_BUFFER2_SIZE(rxdp->Control_2);
-#endif
-
-	skb->dev = dev;
-#ifndef CONFIG_2BUFF_MODE
-	skb_put(skb, len);
-	skb->protocol = eth_type_trans(skb, dev);
-#else
-	buff = skb_push(skb, buf0_len);
-	memcpy(buff, ba->ba_0, buf0_len);
-	skb_put(skb, buf2_len);
 	skb->protocol = eth_type_trans(skb, dev);
-#endif
-
 #ifdef CONFIG_S2IO_NAPI
-	netif_receive_skb(skb);
+	if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+		/* Queueing the vlan frame to the upper layer */
+		vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+			RXD_GET_VLAN_TAG(rxdp->Control_2));
+	} else {
+		netif_receive_skb(skb);
+	}
 #else
-	netif_rx(skb);
+	if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
+		/* Queueing the vlan frame to the upper layer */
+		vlan_hwaccel_rx(skb, sp->vlgrp,
+			RXD_GET_VLAN_TAG(rxdp->Control_2));
+	} else {
+		netif_rx(skb);
+	}
 #endif
-
 	dev->last_rx = jiffies;
-	sp->rx_pkt_count++;
-	sp->stats.rx_packets++;
-#ifndef CONFIG_2BUFF_MODE
-	sp->stats.rx_bytes += len;
-#else
-	sp->stats.rx_bytes += buf0_len + buf2_len;
-#endif
-
 	atomic_dec(&sp->rx_bufs_left[ring_no]);
-	rxdp->Host_Control = 0;
 	return SUCCESS;
 }
 
@@ -4464,13 +5104,13 @@ static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
  *  @link : inidicates whether link is UP/DOWN.
  *  Description:
  *  This function stops/starts the Tx queue depending on whether the link
- *  status of the NIC is is down or up. This is called by the Alarm 
- *  interrupt handler whenever a link change interrupt comes up. 
+ *  status of the NIC is is down or up. This is called by the Alarm
+ *  interrupt handler whenever a link change interrupt comes up.
  *  Return value:
  *  void.
  */
 
-static void s2io_link(nic_t * sp, int link)
+void s2io_link(nic_t * sp, int link)
 {
 	struct net_device *dev = (struct net_device *) sp->dev;
 
@@ -4487,8 +5127,25 @@ static void s2io_link(nic_t * sp, int link)
 }
 
 /**
- *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers . 
- *  @sp : private member of the device structure, which is a pointer to the 
+ *  get_xena_rev_id - to identify revision ID of xena.
+ *  @pdev : PCI Dev structure
+ *  Description:
+ *  Function to identify the Revision ID of xena.
+ *  Return value:
+ *  returns the revision ID of the device.
+ */
+
+int get_xena_rev_id(struct pci_dev *pdev)
+{
+	u8 id = 0;
+	int ret;
+	ret = pci_read_config_byte(pdev, PCI_REVISION_ID, (u8 *) & id);
+	return id;
+}
+
+/**
+ *  s2io_init_pci -Initialization of PCI and PCI-X configuration registers .
+ *  @sp : private member of the device structure, which is a pointer to the
  *  s2io_nic structure.
  *  Description:
  *  This function initializes a few of the PCI and PCI-X configuration registers
@@ -4499,15 +5156,15 @@ static void s2io_link(nic_t * sp, int link)
 
 static void s2io_init_pci(nic_t * sp)
 {
-	u16 pci_cmd = 0;
+	u16 pci_cmd = 0, pcix_cmd = 0;
 
 	/* Enable Data Parity Error Recovery in PCI-X command register. */
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      (sp->pcix_cmd | 1));
+			      (pcix_cmd | 1));
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 
 	/* Set the PErr Response bit in PCI command register. */
 	pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
@@ -4515,53 +5172,43 @@ static void s2io_init_pci(nic_t * sp)
 			      (pci_cmd | PCI_COMMAND_PARITY));
 	pci_read_config_word(sp->pdev, PCI_COMMAND, &pci_cmd);
 
-	/* Set MMRB count to 1024 in PCI-X Command register. */
-	sp->pcix_cmd &= 0xFFF3;
-	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, (sp->pcix_cmd | (0x1 << 2)));	/* MMRBC 1K */
-	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
-
-	/*  Setting Maximum outstanding splits based on system type. */
-	sp->pcix_cmd &= 0xFF8F;
-
-	sp->pcix_cmd |= XENA_MAX_OUTSTANDING_SPLITS(0x1);	/* 2 splits. */
-	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      sp->pcix_cmd);
-	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
 	/* Forcibly disabling relaxed ordering capability of the card. */
-	sp->pcix_cmd &= 0xfffd;
+	pcix_cmd &= 0xfffd;
 	pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			      sp->pcix_cmd);
+			      pcix_cmd);
 	pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
-			     &(sp->pcix_cmd));
+			     &(pcix_cmd));
 }
 
 MODULE_AUTHOR("Raghavendra Koushik <raghavendra.koushik@neterion.com>");
 MODULE_LICENSE("GPL");
 module_param(tx_fifo_num, int, 0);
-module_param_array(tx_fifo_len, int, NULL, 0);
 module_param(rx_ring_num, int, 0);
-module_param_array(rx_ring_sz, int, NULL, 0);
-module_param(Stats_refresh_time, int, 0);
+module_param_array(tx_fifo_len, uint, NULL, 0);
+module_param_array(rx_ring_sz, uint, NULL, 0);
+module_param_array(rts_frm_len, uint, NULL, 0);
+module_param(use_continuous_tx_intrs, int, 1);
 module_param(rmac_pause_time, int, 0);
 module_param(mc_pause_threshold_q0q3, int, 0);
 module_param(mc_pause_threshold_q4q7, int, 0);
 module_param(shared_splits, int, 0);
 module_param(tmac_util_period, int, 0);
 module_param(rmac_util_period, int, 0);
+module_param(bimodal, bool, 0);
 #ifndef CONFIG_S2IO_NAPI
 module_param(indicate_max_pkts, int, 0);
 #endif
+module_param(rxsync_frequency, int, 0);
+
 /**
- *  s2io_init_nic - Initialization of the adapter . 
+ *  s2io_init_nic - Initialization of the adapter .
  *  @pdev : structure containing the PCI related information of the device.
  *  @pre: List of PCI devices supported by the driver listed in s2io_tbl.
  *  Description:
  *  The function initializes an adapter identified by the pci_dec structure.
- *  All OS related initialization including memory and device structure and 
- *  initlaization of the device private variable is done. Also the swapper 
- *  control register is initialized to enable read and write into the I/O 
+ *  All OS related initialization including memory and device structure and
+ *  initlaization of the device private variable is done. Also the swapper
+ *  control register is initialized to enable read and write into the I/O
  *  registers of the device.
  *  Return value:
  *  returns 0 on success and negative on failure.
@@ -4572,7 +5219,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 {
 	nic_t *sp;
 	struct net_device *dev;
-	char *dev_name = "S2IO 10GE NIC";
 	int i, j, ret;
 	int dma_flag = FALSE;
 	u32 mac_up, mac_down;
@@ -4581,10 +5227,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	u16 subid;
 	mac_info_t *mac_control;
 	struct config_param *config;
+	int mode;
 
-
-	DBG_PRINT(ERR_DBG, "Loading S2IO driver with %s\n",
-		s2io_driver_version);
+#ifdef CONFIG_S2IO_NAPI
+	DBG_PRINT(ERR_DBG, "NAPI support has been enabled\n");
+#endif
 
 	if ((ret = pci_enable_device(pdev))) {
 		DBG_PRINT(ERR_DBG,
@@ -4595,7 +5242,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
 		DBG_PRINT(INIT_DBG, "s2io_init_nic: Using 64bit DMA\n");
 		dma_flag = TRUE;
-
 		if (pci_set_consistent_dma_mask
 		    (pdev, DMA_64BIT_MASK)) {
 			DBG_PRINT(ERR_DBG,
@@ -4635,34 +5281,41 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	memset(sp, 0, sizeof(nic_t));
 	sp->dev = dev;
 	sp->pdev = pdev;
-	sp->vendor_id = pdev->vendor;
-	sp->device_id = pdev->device;
 	sp->high_dma_flag = dma_flag;
-	sp->irq = pdev->irq;
 	sp->device_enabled_once = FALSE;
-	strcpy(sp->name, dev_name);
+
+	if ((pdev->device == PCI_DEVICE_ID_HERC_WIN) ||
+		(pdev->device == PCI_DEVICE_ID_HERC_UNI))
+		sp->device_type = XFRAME_II_DEVICE;
+	else
+		sp->device_type = XFRAME_I_DEVICE;
 
 	/* Initialize some PCI/PCI-X fields of the NIC. */
 	s2io_init_pci(sp);
 
-	/* 
+	/*
 	 * Setting the device configuration parameters.
-	 * Most of these parameters can be specified by the user during 
-	 * module insertion as they are module loadable parameters. If 
-	 * these parameters are not not specified during load time, they 
+	 * Most of these parameters can be specified by the user during
+	 * module insertion as they are module loadable parameters. If
+	 * these parameters are not not specified during load time, they
 	 * are initialized with default values.
 	 */
 	mac_control = &sp->mac_control;
 	config = &sp->config;
 
 	/* Tx side parameters. */
-	tx_fifo_len[0] = DEFAULT_FIFO_LEN;	/* Default value. */
+	if (tx_fifo_len[0] == 0)
+		tx_fifo_len[0] = DEFAULT_FIFO_LEN; /* Default value. */
 	config->tx_fifo_num = tx_fifo_num;
 	for (i = 0; i < MAX_TX_FIFOS; i++) {
 		config->tx_cfg[i].fifo_len = tx_fifo_len[i];
 		config->tx_cfg[i].fifo_priority = i;
 	}
 
+	/* mapping the QoS priority to the configured fifos */
+	for (i = 0; i < MAX_TX_FIFOS; i++)
+		config->fifo_mapping[i] = fifo_map[config->tx_fifo_num][i];
+
 	config->tx_intr_type = TXD_INT_TYPE_UTILZ;
 	for (i = 0; i < config->tx_fifo_num; i++) {
 		config->tx_cfg[i].f_no_snoop =
@@ -4675,7 +5328,8 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	config->max_txds = MAX_SKB_FRAGS;
 
 	/* Rx side parameters. */
-	rx_ring_sz[0] = SMALL_BLK_CNT;	/* Default value. */
+	if (rx_ring_sz[0] == 0)
+		rx_ring_sz[0] = SMALL_BLK_CNT; /* Default value. */
 	config->rx_ring_num = rx_ring_num;
 	for (i = 0; i < MAX_RX_RINGS; i++) {
 		config->rx_cfg[i].num_rxd = rx_ring_sz[i] *
@@ -4699,10 +5353,13 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	for (i = 0; i < config->rx_ring_num; i++)
 		atomic_set(&sp->rx_bufs_left[i], 0);
 
+	/* Initialize the number of ISRs currently running */
+	atomic_set(&sp->isr_cnt, 0);
+
 	/*  initialize the shared memory used by the NIC and the host */
 	if (init_shared_mem(sp)) {
 		DBG_PRINT(ERR_DBG, "%s: Memory allocation failed\n",
-			  dev->name);
+			  __FUNCTION__);
 		ret = -ENOMEM;
 		goto mem_alloc_failed;
 	}
@@ -4743,13 +5400,17 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	dev->do_ioctl = &s2io_ioctl;
 	dev->change_mtu = &s2io_change_mtu;
 	SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+	dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+	dev->vlan_rx_register = s2io_vlan_rx_register;
+	dev->vlan_rx_kill_vid = (void *)s2io_vlan_rx_kill_vid;
+
 	/*
 	 * will use eth_mac_addr() for  dev->set_mac_address
 	 * mac address will be set every time dev->open() is called
 	 */
-#ifdef CONFIG_S2IO_NAPI
+#if defined(CONFIG_S2IO_NAPI)
 	dev->poll = s2io_poll;
-	dev->weight = 90;
+	dev->weight = 32;
 #endif
 
 	dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
@@ -4776,22 +5437,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto set_swap_failed;
 	}
 
-	/* Fix for all "FFs" MAC address problems observed on Alpha platforms */
-	fix_mac_address(sp);
-	s2io_reset(sp);
+	/* Verify if the Herc works on the slot its placed into */
+	if (sp->device_type & XFRAME_II_DEVICE) {
+		mode = s2io_verify_pci_mode(sp);
+		if (mode < 0) {
+			DBG_PRINT(ERR_DBG, "%s: ", __FUNCTION__);
+			DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode\n");
+			ret = -EBADSLT;
+			goto set_swap_failed;
+		}
+	}
 
-	/*
-	 * Setting swapper control on the NIC, so the MAC address can be read.
-	 */
-	if (s2io_set_swapper(sp)) {
-		DBG_PRINT(ERR_DBG,
-			  "%s: S2IO: swapper settings are wrong\n",
-			  dev->name);
-		ret = -EAGAIN;
-		goto set_swap_failed;
+	/* Not needed for Herc */
+	if (sp->device_type & XFRAME_I_DEVICE) {
+		/*
+		 * Fix for all "FFs" MAC address problems observed on
+		 * Alpha platforms
+		 */
+		fix_mac_address(sp);
+		s2io_reset(sp);
 	}
 
-	/*  
+	/*
 	 * MAC address initialization.
 	 * For now only one mac address will be read and used.
 	 */
@@ -4814,37 +5481,28 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 	sp->def_mac_addr[0].mac_addr[5] = (u8) (mac_down >> 16);
 	sp->def_mac_addr[0].mac_addr[4] = (u8) (mac_down >> 24);
 
-	DBG_PRINT(INIT_DBG,
-		  "DEFAULT MAC ADDR:0x%02x-%02x-%02x-%02x-%02x-%02x\n",
-		  sp->def_mac_addr[0].mac_addr[0],
-		  sp->def_mac_addr[0].mac_addr[1],
-		  sp->def_mac_addr[0].mac_addr[2],
-		  sp->def_mac_addr[0].mac_addr[3],
-		  sp->def_mac_addr[0].mac_addr[4],
-		  sp->def_mac_addr[0].mac_addr[5]);
-
 	/*  Set the factory defined MAC address initially   */
 	dev->addr_len = ETH_ALEN;
 	memcpy(dev->dev_addr, sp->def_mac_addr, ETH_ALEN);
 
 	/*
-	 * Initialize the tasklet status and link state flags 
-	 * and the card statte parameter
+	 * Initialize the tasklet status and link state flags
+	 * and the card state parameter
 	 */
 	atomic_set(&(sp->card_state), 0);
 	sp->tasklet_status = 0;
 	sp->link_state = 0;
 
-
 	/* Initialize spinlocks */
 	spin_lock_init(&sp->tx_lock);
 #ifndef CONFIG_S2IO_NAPI
 	spin_lock_init(&sp->put_lock);
 #endif
+	spin_lock_init(&sp->rx_lock);
 
-	/* 
-	 * SXE-002: Configure link and activity LED to init state 
-	 * on driver load. 
+	/*
+	 * SXE-002: Configure link and activity LED to init state
+	 * on driver load.
 	 */
 	subid = sp->pdev->subsystem_device;
 	if ((subid & 0xFF) >= 0x07) {
@@ -4864,13 +5522,61 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 		goto register_failed;
 	}
 
-	/* 
-	 * Make Link state as off at this point, when the Link change 
-	 * interrupt comes the state will be automatically changed to 
+	if (sp->device_type & XFRAME_II_DEVICE) {
+		DBG_PRINT(ERR_DBG, "%s: Neterion Xframe II 10GbE adapter ",
+			  dev->name);
+		DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
+				get_xena_rev_id(sp->pdev),
+				s2io_driver_version);
+		DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+			  sp->def_mac_addr[0].mac_addr[0],
+			  sp->def_mac_addr[0].mac_addr[1],
+			  sp->def_mac_addr[0].mac_addr[2],
+			  sp->def_mac_addr[0].mac_addr[3],
+			  sp->def_mac_addr[0].mac_addr[4],
+			  sp->def_mac_addr[0].mac_addr[5]);
+		mode = s2io_print_pci_mode(sp);
+		if (mode < 0) {
+			DBG_PRINT(ERR_DBG, " Unsupported PCI bus mode ");
+			ret = -EBADSLT;
+			goto set_swap_failed;
+		}
+	} else {
+		DBG_PRINT(ERR_DBG, "%s: Neterion Xframe I 10GbE adapter ",
+			  dev->name);
+		DBG_PRINT(ERR_DBG, "(rev %d), Driver %s\n",
+					get_xena_rev_id(sp->pdev),
+					s2io_driver_version);
+		DBG_PRINT(ERR_DBG, "MAC ADDR: %02x:%02x:%02x:%02x:%02x:%02x\n",
+			  sp->def_mac_addr[0].mac_addr[0],
+			  sp->def_mac_addr[0].mac_addr[1],
+			  sp->def_mac_addr[0].mac_addr[2],
+			  sp->def_mac_addr[0].mac_addr[3],
+			  sp->def_mac_addr[0].mac_addr[4],
+			  sp->def_mac_addr[0].mac_addr[5]);
+	}
+
+	/* Initialize device name */
+	strcpy(sp->name, dev->name);
+	if (sp->device_type & XFRAME_II_DEVICE)
+		strcat(sp->name, ": Neterion Xframe II 10GbE adapter");
+	else
+		strcat(sp->name, ": Neterion Xframe I 10GbE adapter");
+
+	/* Initialize bimodal Interrupts */
+	sp->config.bimodal = bimodal;
+	if (!(sp->device_type & XFRAME_II_DEVICE) && bimodal) {
+		sp->config.bimodal = 0;
+		DBG_PRINT(ERR_DBG,"%s:Bimodal intr not supported by Xframe I\n",
+			dev->name);
+	}
+
+	/*
+	 * Make Link state as off at this point, when the Link change
+	 * interrupt comes the state will be automatically changed to
 	 * the right state.
 	 */
 	netif_carrier_off(dev);
-	sp->last_link_state = LINK_DOWN;
 
 	return 0;
 
@@ -4891,11 +5597,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
 }
 
 /**
- * s2io_rem_nic - Free the PCI device 
+ * s2io_rem_nic - Free the PCI device
  * @pdev: structure containing the PCI related information of the device.
- * Description: This function is called by the Pci subsystem to release a 
+ * Description: This function is called by the Pci subsystem to release a
  * PCI device and free up all resource held up by the device. This could
- * be in response to a Hot plug event or when the driver is to be removed 
+ * be in response to a Hot plug event or when the driver is to be removed
  * from memory.
  */
 
@@ -4919,7 +5625,6 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 	pci_release_regions(pdev);
 	pci_set_drvdata(pdev, NULL);
-
 	free_netdev(dev);
 }
 
@@ -4935,11 +5640,11 @@ int __init s2io_starter(void)
 }
 
 /**
- * s2io_closer - Cleanup routine for the driver 
+ * s2io_closer - Cleanup routine for the driver
  * Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
  */
 
-static void s2io_closer(void)
+void s2io_closer(void)
 {
 	pci_unregister_driver(&s2io_driver);
 	DBG_PRINT(INIT_DBG, "cleanup done\n");
diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h
index 1711c8c3dc9..bc64d967f08 100644
--- a/drivers/net/s2io.h
+++ b/drivers/net/s2io.h
@@ -31,6 +31,9 @@
 #define SUCCESS 0
 #define FAILURE -1
 
+/* Maximum time to flicker LED when asked to identify NIC using ethtool */
+#define MAX_FLICKER_TIME	60000 /* 60 Secs */
+
 /* Maximum outstanding splits to be configured into xena. */
 typedef enum xena_max_outstanding_splits {
 	XENA_ONE_SPLIT_TRANSACTION = 0,
@@ -45,10 +48,10 @@ typedef enum xena_max_outstanding_splits {
 #define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4)
 
 /*  OS concerned variables and constants */
-#define WATCH_DOG_TIMEOUT   	5*HZ
-#define EFILL       			0x1234
-#define ALIGN_SIZE  			127
-#define	PCIX_COMMAND_REGISTER	0x62
+#define WATCH_DOG_TIMEOUT		15*HZ
+#define EFILL				0x1234
+#define ALIGN_SIZE			127
+#define	PCIX_COMMAND_REGISTER		0x62
 
 /*
  * Debug related variables.
@@ -61,7 +64,7 @@ typedef enum xena_max_outstanding_splits {
 #define	INTR_DBG	4
 
 /* Global variable that defines the present debug level of the driver. */
-static int debug_level = ERR_DBG;	/* Default level. */
+int debug_level = ERR_DBG;	/* Default level. */
 
 /* DEBUG message print. */
 #define DBG_PRINT(dbg_level, args...)  if(!(debug_level<dbg_level)) printk(args)
@@ -71,6 +74,12 @@ static int debug_level = ERR_DBG;	/* Default level. */
 #define L4_CKSUM_OK 0xFFFF
 #define S2IO_JUMBO_SIZE 9600
 
+/* Driver statistics maintained by driver */
+typedef struct {
+	unsigned long long single_ecc_errs;
+	unsigned long long double_ecc_errs;
+} swStat_t;
+
 /* The statistics block of Xena */
 typedef struct stat_block {
 /* Tx MAC statistics counters. */
@@ -186,12 +195,90 @@ typedef struct stat_block {
 	u32 rxd_rd_cnt;
 	u32 rxf_wr_cnt;
 	u32 txf_rd_cnt;
+
+/* Tx MAC statistics overflow counters. */
+	u32 tmac_data_octets_oflow;
+	u32 tmac_frms_oflow;
+	u32 tmac_bcst_frms_oflow;
+	u32 tmac_mcst_frms_oflow;
+	u32 tmac_ucst_frms_oflow;
+	u32 tmac_ttl_octets_oflow;
+	u32 tmac_any_err_frms_oflow;
+	u32 tmac_nucst_frms_oflow;
+	u64 tmac_vlan_frms;
+	u32 tmac_drop_ip_oflow;
+	u32 tmac_vld_ip_oflow;
+	u32 tmac_rst_tcp_oflow;
+	u32 tmac_icmp_oflow;
+	u32 tpa_unknown_protocol;
+	u32 tmac_udp_oflow;
+	u32 reserved_10;
+	u32 tpa_parse_failure;
+
+/* Rx MAC Statistics overflow counters. */
+	u32 rmac_data_octets_oflow;
+	u32 rmac_vld_frms_oflow;
+	u32 rmac_vld_bcst_frms_oflow;
+	u32 rmac_vld_mcst_frms_oflow;
+	u32 rmac_accepted_ucst_frms_oflow;
+	u32 rmac_ttl_octets_oflow;
+	u32 rmac_discarded_frms_oflow;
+	u32 rmac_accepted_nucst_frms_oflow;
+	u32 rmac_usized_frms_oflow;
+	u32 rmac_drop_events_oflow;
+	u32 rmac_frag_frms_oflow;
+	u32 rmac_osized_frms_oflow;
+	u32 rmac_ip_oflow;
+	u32 rmac_jabber_frms_oflow;
+	u32 rmac_icmp_oflow;
+	u32 rmac_drop_ip_oflow;
+	u32 rmac_err_drp_udp_oflow;
+	u32 rmac_udp_oflow;
+	u32 reserved_11;
+	u32 rmac_pause_cnt_oflow;
+	u64 rmac_ttl_1519_4095_frms;
+	u64 rmac_ttl_4096_8191_frms;
+	u64 rmac_ttl_8192_max_frms;
+	u64 rmac_ttl_gt_max_frms;
+	u64 rmac_osized_alt_frms;
+	u64 rmac_jabber_alt_frms;
+	u64 rmac_gt_max_alt_frms;
+	u64 rmac_vlan_frms;
+	u32 rmac_len_discard;
+	u32 rmac_fcs_discard;
+	u32 rmac_pf_discard;
+	u32 rmac_da_discard;
+	u32 rmac_red_discard;
+	u32 rmac_rts_discard;
+	u32 reserved_12;
+	u32 rmac_ingm_full_discard;
+	u32 reserved_13;
+	u32 rmac_accepted_ip_oflow;
+	u32 reserved_14;
+	u32 link_fault_cnt;
+	swStat_t sw_stat;
 } StatInfo_t;
 
-/* Structures representing different init time configuration
+/*
+ * Structures representing different init time configuration
  * parameters of the NIC.
  */
 
+#define MAX_TX_FIFOS 8
+#define MAX_RX_RINGS 8
+
+/* FIFO mappings for all possible number of fifos configured */
+int fifo_map[][MAX_TX_FIFOS] = {
+	{0, 0, 0, 0, 0, 0, 0, 0},
+	{0, 0, 0, 0, 1, 1, 1, 1},
+	{0, 0, 0, 1, 1, 1, 2, 2},
+	{0, 0, 1, 1, 2, 2, 3, 3},
+	{0, 0, 1, 1, 2, 2, 3, 4},
+	{0, 0, 1, 1, 2, 3, 4, 5},
+	{0, 0, 1, 2, 3, 4, 5, 6},
+	{0, 1, 2, 3, 4, 5, 6, 7},
+};
+
 /* Maintains Per FIFO related information. */
 typedef struct tx_fifo_config {
 #define	MAX_AVAILABLE_TXDS	8192
@@ -237,14 +324,14 @@ typedef struct rx_ring_config {
 #define NO_SNOOP_RXD_BUFFER         0x02
 } rx_ring_config_t;
 
-/* This structure provides contains values of the tunable parameters 
- * of the H/W 
+/* This structure provides contains values of the tunable parameters
+ * of the H/W
  */
 struct config_param {
 /* Tx Side */
 	u32 tx_fifo_num;	/*Number of Tx FIFOs */
-#define MAX_TX_FIFOS 8
 
+	u8 fifo_mapping[MAX_TX_FIFOS];
 	tx_fifo_config_t tx_cfg[MAX_TX_FIFOS];	/*Per-Tx FIFO config */
 	u32 max_txds;		/*Max no. of Tx buffer descriptor per TxDL */
 	u64 tx_intr_type;
@@ -252,10 +339,10 @@ struct config_param {
 
 /* Rx Side */
 	u32 rx_ring_num;	/*Number of receive rings */
-#define MAX_RX_RINGS 8
 #define MAX_RX_BLOCKS_PER_RING  150
 
 	rx_ring_config_t rx_cfg[MAX_RX_RINGS];	/*Per-Rx Ring config */
+	u8 bimodal;		/*Flag for setting bimodal interrupts*/
 
 #define HEADER_ETHERNET_II_802_3_SIZE 14
 #define HEADER_802_2_SIZE              3
@@ -269,6 +356,7 @@ struct config_param {
 #define MAX_PYLD_JUMBO              9600
 #define MAX_MTU_JUMBO               (MAX_PYLD_JUMBO+18)
 #define MAX_MTU_JUMBO_VLAN          (MAX_PYLD_JUMBO+22)
+	u16 bus_speed;
 };
 
 /* Structure representing MAC Addrs */
@@ -277,7 +365,7 @@ typedef struct mac_addr {
 } macaddr_t;
 
 /* Structure that represent every FIFO element in the BAR1
- * Address location. 
+ * Address location.
  */
 typedef struct _TxFIFO_element {
 	u64 TxDL_Pointer;
@@ -339,6 +427,7 @@ typedef struct _RxD_t {
 #define RXD_FRAME_PROTO         vBIT(0xFFFF,24,8)
 #define RXD_FRAME_PROTO_IPV4    BIT(27)
 #define RXD_FRAME_PROTO_IPV6    BIT(28)
+#define RXD_FRAME_IP_FRAG	BIT(29)
 #define RXD_FRAME_PROTO_TCP     BIT(30)
 #define RXD_FRAME_PROTO_UDP     BIT(31)
 #define TCP_OR_UDP_FRAME        (RXD_FRAME_PROTO_TCP | RXD_FRAME_PROTO_UDP)
@@ -346,11 +435,15 @@ typedef struct _RxD_t {
 #define RXD_GET_L4_CKSUM(val)   ((u16)(val) & 0xFFFF)
 
 	u64 Control_2;
+#define	THE_RXD_MARK		0x3
+#define	SET_RXD_MARKER		vBIT(THE_RXD_MARK, 0, 2)
+#define	GET_RXD_MARKER(ctrl)	((ctrl & SET_RXD_MARKER) >> 62)
+
 #ifndef CONFIG_2BUFF_MODE
-#define MASK_BUFFER0_SIZE       vBIT(0xFFFF,0,16)
-#define SET_BUFFER0_SIZE(val)   vBIT(val,0,16)
+#define MASK_BUFFER0_SIZE       vBIT(0x3FFF,2,14)
+#define SET_BUFFER0_SIZE(val)   vBIT(val,2,14)
 #else
-#define MASK_BUFFER0_SIZE       vBIT(0xFF,0,16)
+#define MASK_BUFFER0_SIZE       vBIT(0xFF,2,14)
 #define MASK_BUFFER1_SIZE       vBIT(0xFFFF,16,16)
 #define MASK_BUFFER2_SIZE       vBIT(0xFFFF,32,16)
 #define SET_BUFFER0_SIZE(val)   vBIT(val,8,8)
@@ -363,7 +456,7 @@ typedef struct _RxD_t {
 #define SET_NUM_TAG(val)       vBIT(val,16,32)
 
 #ifndef CONFIG_2BUFF_MODE
-#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0xFFFF,0,16)))
+#define RXD_GET_BUFFER0_SIZE(Control_2) (u64)((Control_2 & vBIT(0x3FFF,2,14)))
 #else
 #define RXD_GET_BUFFER0_SIZE(Control_2) (u8)((Control_2 & MASK_BUFFER0_SIZE) \
 							>> 48)
@@ -382,7 +475,7 @@ typedef struct _RxD_t {
 #endif
 } RxD_t;
 
-/* Structure that represents the Rx descriptor block which contains 
+/* Structure that represents the Rx descriptor block which contains
  * 128 Rx descriptors.
  */
 #ifndef CONFIG_2BUFF_MODE
@@ -392,11 +485,11 @@ typedef struct _RxD_block {
 
 	u64 reserved_0;
 #define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
-	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last 
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last
 				 * Rxd in this blk */
 	u64 reserved_2_pNext_RxD_block;	/* Logical ptr to next */
 	u64 pNext_RxD_Blk_physical;	/* Buff0_ptr.In a 32 bit arch
-					 * the upper 32 bits should 
+					 * the upper 32 bits should
 					 * be 0 */
 } RxD_block_t;
 #else
@@ -405,13 +498,13 @@ typedef struct _RxD_block {
 	RxD_t rxd[MAX_RXDS_PER_BLOCK];
 
 #define END_OF_BLOCK    0xFEFFFFFFFFFFFFFFULL
-	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd 
+	u64 reserved_1;		/* 0xFEFFFFFFFFFFFFFF to mark last Rxd
 				 * in this blk */
 	u64 pNext_RxD_Blk_physical;	/* Phy ponter to next blk. */
 } RxD_block_t;
 #define SIZE_OF_BLOCK	4096
 
-/* Structure to hold virtual addresses of Buf0 and Buf1 in 
+/* Structure to hold virtual addresses of Buf0 and Buf1 in
  * 2buf mode. */
 typedef struct bufAdd {
 	void *ba_0_org;
@@ -423,8 +516,8 @@ typedef struct bufAdd {
 
 /* Structure which stores all the MAC control parameters */
 
-/* This structure stores the offset of the RxD in the ring 
- * from which the Rx Interrupt processor can start picking 
+/* This structure stores the offset of the RxD in the ring
+ * from which the Rx Interrupt processor can start picking
  * up the RxDs for processing.
  */
 typedef struct _rx_curr_get_info_t {
@@ -436,7 +529,7 @@ typedef struct _rx_curr_get_info_t {
 typedef rx_curr_get_info_t rx_curr_put_info_t;
 
 /* This structure stores the offset of the TxDl in the FIFO
- * from which the Tx Interrupt processor can start picking 
+ * from which the Tx Interrupt processor can start picking
  * up the TxDLs for send complete interrupt processing.
  */
 typedef struct {
@@ -446,32 +539,96 @@ typedef struct {
 
 typedef tx_curr_get_info_t tx_curr_put_info_t;
 
-/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
- * is maintained in this structure.
- */
-typedef struct mac_info {
-/* rx side stuff */
-	/* Put pointer info which indictes which RxD has to be replenished 
+/* Structure that holds the Phy and virt addresses of the Blocks */
+typedef struct rx_block_info {
+	RxD_t *block_virt_addr;
+	dma_addr_t block_dma_addr;
+} rx_block_info_t;
+
+/* pre declaration of the nic structure */
+typedef struct s2io_nic nic_t;
+
+/* Ring specific structure */
+typedef struct ring_info {
+	/* The ring number */
+	int ring_no;
+
+	/*
+	 *  Place holders for the virtual and physical addresses of
+	 *  all the Rx Blocks
+	 */
+	rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING];
+	int block_count;
+	int pkt_cnt;
+
+	/*
+	 * Put pointer info which indictes which RxD has to be replenished
 	 * with a new buffer.
 	 */
-	rx_curr_put_info_t rx_curr_put_info[MAX_RX_RINGS];
+	rx_curr_put_info_t rx_curr_put_info;
 
-	/* Get pointer info which indictes which is the last RxD that was 
+	/*
+	 * Get pointer info which indictes which is the last RxD that was
 	 * processed by the driver.
 	 */
-	rx_curr_get_info_t rx_curr_get_info[MAX_RX_RINGS];
+	rx_curr_get_info_t rx_curr_get_info;
 
-	u16 rmac_pause_time;
-	u16 mc_pause_threshold_q0q3;
-	u16 mc_pause_threshold_q4q7;
+#ifndef CONFIG_S2IO_NAPI
+	/* Index to the absolute position of the put pointer of Rx ring */
+	int put_pos;
+#endif
+
+#ifdef CONFIG_2BUFF_MODE
+	/* Buffer Address store. */
+	buffAdd_t **ba;
+#endif
+	nic_t *nic;
+} ring_info_t;
 
+/* Fifo specific structure */
+typedef struct fifo_info {
+	/* FIFO number */
+	int fifo_no;
+
+	/* Maximum TxDs per TxDL */
+	int max_txds;
+
+	/* Place holder of all the TX List's Phy and Virt addresses. */
+	list_info_hold_t *list_info;
+
+	/*
+	 * Current offset within the tx FIFO where driver would write
+	 * new Tx frame
+	 */
+	tx_curr_put_info_t tx_curr_put_info;
+
+	/*
+	 * Current offset within tx FIFO from where the driver would start freeing
+	 * the buffers
+	 */
+	tx_curr_get_info_t tx_curr_get_info;
+
+	nic_t *nic;
+}fifo_info_t;
+
+/* Infomation related to the Tx and Rx FIFOs and Rings of Xena
+ * is maintained in this structure.
+ */
+typedef struct mac_info {
 /* tx side stuff */
 	/* logical pointer of start of each Tx FIFO */
 	TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
 
-/* Current offset within tx_FIFO_start, where driver would write new Tx frame*/
-	tx_curr_put_info_t tx_curr_put_info[MAX_TX_FIFOS];
-	tx_curr_get_info_t tx_curr_get_info[MAX_TX_FIFOS];
+	/* Fifo specific structure */
+	fifo_info_t fifos[MAX_TX_FIFOS];
+
+/* rx side stuff */
+	/* Ring specific structure */
+	ring_info_t rings[MAX_RX_RINGS];
+
+	u16 rmac_pause_time;
+	u16 mc_pause_threshold_q0q3;
+	u16 mc_pause_threshold_q4q7;
 
 	void *stats_mem;	/* orignal pointer to allocated mem */
 	dma_addr_t stats_mem_phy;	/* Physical address of the stat block */
@@ -485,12 +642,6 @@ typedef struct {
 	int usage_cnt;
 } usr_addr_t;
 
-/* Structure that holds the Phy and virt addresses of the Blocks */
-typedef struct rx_block_info {
-	RxD_t *block_virt_addr;
-	dma_addr_t block_dma_addr;
-} rx_block_info_t;
-
 /* Default Tunable parameters of the NIC. */
 #define DEFAULT_FIFO_LEN 4096
 #define SMALL_RXD_CNT	30 * (MAX_RXDS_PER_BLOCK+1)
@@ -499,7 +650,20 @@ typedef struct rx_block_info {
 #define LARGE_BLK_CNT	100
 
 /* Structure representing one instance of the NIC */
-typedef struct s2io_nic {
+struct s2io_nic {
+#ifdef CONFIG_S2IO_NAPI
+	/*
+	 * Count of packets to be processed in a given iteration, it will be indicated
+	 * by the quota field of the device structure when NAPI is enabled.
+	 */
+	int pkts_to_process;
+#endif
+	struct net_device *dev;
+	mac_info_t mac_control;
+	struct config_param config;
+	struct pci_dev *pdev;
+	void __iomem *bar0;
+	void __iomem *bar1;
 #define MAX_MAC_SUPPORTED   16
 #define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
 
@@ -507,33 +671,20 @@ typedef struct s2io_nic {
 	macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
 
 	struct net_device_stats stats;
-	void __iomem *bar0;
-	void __iomem *bar1;
-	struct config_param config;
-	mac_info_t mac_control;
 	int high_dma_flag;
 	int device_close_flag;
 	int device_enabled_once;
 
-	char name[32];
+	char name[50];
 	struct tasklet_struct task;
 	volatile unsigned long tasklet_status;
-	struct timer_list timer;
-	struct net_device *dev;
-	struct pci_dev *pdev;
 
-	u16 vendor_id;
-	u16 device_id;
-	u16 ccmd;
-	u32 cbar0_1;
-	u32 cbar0_2;
-	u32 cbar1_1;
-	u32 cbar1_2;
-	u32 cirq;
-	u8 cache_line;
-	u32 rom_expansion;
-	u16 pcix_cmd;
-	u32 irq;
+	/* Timer that handles I/O errors/exceptions */
+	struct timer_list alarm_timer;
+
+	/* Space to back up the PCI config space */
+	u32 config_space[256 / sizeof(u32)];
+
 	atomic_t rx_bufs_left[MAX_RX_RINGS];
 
 	spinlock_t tx_lock;
@@ -558,27 +709,11 @@ typedef struct s2io_nic {
 	u16 tx_err_count;
 	u16 rx_err_count;
 
-#ifndef CONFIG_S2IO_NAPI
-	/* Index to the absolute position of the put pointer of Rx ring. */
-	int put_pos[MAX_RX_RINGS];
-#endif
-
-	/*
-	 *  Place holders for the virtual and physical addresses of 
-	 *  all the Rx Blocks
-	 */
-	rx_block_info_t rx_blocks[MAX_RX_RINGS][MAX_RX_BLOCKS_PER_RING];
-	int block_count[MAX_RX_RINGS];
-	int pkt_cnt[MAX_RX_RINGS];
-
-	/* Place holder of all the TX List's Phy and Virt addresses. */
-	list_info_hold_t *list_info[MAX_TX_FIFOS];
-
 	/*  Id timer, used to blink NIC to physically identify NIC. */
 	struct timer_list id_timer;
 
 	/*  Restart timer, used to restart NIC if the device is stuck and
-	 *  a schedule task that will set the correct Link state once the 
+	 *  a schedule task that will set the correct Link state once the
 	 *  NIC's PHY has stabilized after a state change.
 	 */
 #ifdef INIT_TQUEUE
@@ -589,12 +724,12 @@ typedef struct s2io_nic {
 	struct work_struct set_link_task;
 #endif
 
-	/* Flag that can be used to turn on or turn off the Rx checksum 
+	/* Flag that can be used to turn on or turn off the Rx checksum
 	 * offload feature.
 	 */
 	int rx_csum;
 
-	/*  after blink, the adapter must be restored with original 
+	/*  after blink, the adapter must be restored with original
 	 *  values.
 	 */
 	u64 adapt_ctrl_org;
@@ -604,16 +739,19 @@ typedef struct s2io_nic {
 #define	LINK_DOWN	1
 #define	LINK_UP		2
 
-#ifdef CONFIG_2BUFF_MODE
-	/* Buffer Address store. */
-	buffAdd_t **ba[MAX_RX_RINGS];
-#endif
 	int task_flag;
 #define CARD_DOWN 1
 #define CARD_UP 2
 	atomic_t card_state;
 	volatile unsigned long link_state;
-} nic_t;
+	struct vlan_group *vlgrp;
+#define XFRAME_I_DEVICE		1
+#define XFRAME_II_DEVICE	2
+	u8 device_type;
+
+	spinlock_t	rx_lock;
+	atomic_t	isr_cnt;
+};
 
 #define RESET_ERROR 1;
 #define CMD_ERROR   2;
@@ -622,7 +760,8 @@ typedef struct s2io_nic {
 #ifndef readq
 static inline u64 readq(void __iomem *addr)
 {
-	u64 ret = readl(addr + 4);
+	u64 ret = 0;
+	ret = readl(addr + 4);
 	ret <<= 32;
 	ret |= readl(addr);
 
@@ -637,10 +776,10 @@ static inline void writeq(u64 val, void __iomem *addr)
 	writel((u32) (val >> 32), (addr + 4));
 }
 
-/* In 32 bit modes, some registers have to be written in a 
+/* In 32 bit modes, some registers have to be written in a
  * particular order to expect correct hardware operation. The
- * macro SPECIAL_REG_WRITE is used to perform such ordered 
- * writes. Defines UF (Upper First) and LF (Lower First) will 
+ * macro SPECIAL_REG_WRITE is used to perform such ordered
+ * writes. Defines UF (Upper First) and LF (Lower First) will
  * be used to specify the required write order.
  */
 #define UF	1
@@ -716,6 +855,7 @@ static inline void SPECIAL_REG_WRITE(u64 val, void __iomem *addr, int order)
 #define	PCC_FB_ECC_ERR	   vBIT(0xff, 16, 8)	/* Interrupt to indicate
 						   PCC_FB_ECC Error. */
 
+#define RXD_GET_VLAN_TAG(Control_2) (u16)(Control_2 & MASK_VLAN_TAG)
 /*
  * Prototype declaration.
  */
@@ -725,36 +865,30 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev);
 static int init_shared_mem(struct s2io_nic *sp);
 static void free_shared_mem(struct s2io_nic *sp);
 static int init_nic(struct s2io_nic *nic);
-#ifndef CONFIG_S2IO_NAPI
-static void rx_intr_handler(struct s2io_nic *sp);
-#endif
-static void tx_intr_handler(struct s2io_nic *sp);
+static void rx_intr_handler(ring_info_t *ring_data);
+static void tx_intr_handler(fifo_info_t *fifo_data);
 static void alarm_intr_handler(struct s2io_nic *sp);
 
 static int s2io_starter(void);
-static void s2io_closer(void);
+void s2io_closer(void);
 static void s2io_tx_watchdog(struct net_device *dev);
 static void s2io_tasklet(unsigned long dev_addr);
 static void s2io_set_multicast(struct net_device *dev);
-#ifndef CONFIG_2BUFF_MODE
-static int rx_osm_handler(nic_t * sp, u16 len, RxD_t * rxdp, int ring_no);
-#else
-static int rx_osm_handler(nic_t * sp, RxD_t * rxdp, int ring_no,
-			  buffAdd_t * ba);
-#endif
-static void s2io_link(nic_t * sp, int link);
-static void s2io_reset(nic_t * sp);
-#ifdef CONFIG_S2IO_NAPI
+static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
+void s2io_link(nic_t * sp, int link);
+void s2io_reset(nic_t * sp);
+#if defined(CONFIG_S2IO_NAPI)
 static int s2io_poll(struct net_device *dev, int *budget);
 #endif
 static void s2io_init_pci(nic_t * sp);
-static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
+static void s2io_alarm_handle(unsigned long data);
 static irqreturn_t s2io_isr(int irq, void *dev_id, struct pt_regs *regs);
-static int verify_xena_quiescence(u64 val64, int flag);
+static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
 static struct ethtool_ops netdev_ethtool_ops;
 static void s2io_set_link(unsigned long data);
-static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t * nic);
-static int s2io_card_up(nic_t * nic);
-
+int s2io_set_swapper(nic_t * sp);
+static void s2io_card_down(nic_t *nic);
+static int s2io_card_up(nic_t *nic);
+int get_xena_rev_id(struct pci_dev *pdev);
 #endif				/* _S2IO_H */
diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index 3ad0b6751f6..221354eea21 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -156,52 +156,6 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
  	 
  	SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
  	
-#ifdef SHAPER_COMPLEX /* and broken.. */
-
- 	while(ptr && ptr!=(struct sk_buff *)&shaper->sendq)
- 	{
- 		if(ptr->pri<skb->pri 
- 			&& jiffies - SHAPERCB(ptr)->shapeclock < SHAPER_MAXSLIP)
- 		{
- 			struct sk_buff *tmp=ptr->prev;
-
- 			/*
- 			 *	It goes before us therefore we slip the length
- 			 *	of the new frame.
- 			 */
-
- 			SHAPERCB(ptr)->shapeclock+=SHAPERCB(skb)->shapelen;
- 			SHAPERCB(ptr)->shapelatency+=SHAPERCB(skb)->shapelen;
-
- 			/*
- 			 *	The packet may have slipped so far back it
- 			 *	fell off.
- 			 */
- 			if(SHAPERCB(ptr)->shapelatency > SHAPER_LATENCY)
- 			{
- 				skb_unlink(ptr);
- 				dev_kfree_skb(ptr);
- 			}
- 			ptr=tmp;
- 		}
- 		else
- 			break;
- 	}
- 	if(ptr==NULL || ptr==(struct sk_buff *)&shaper->sendq)
- 		skb_queue_head(&shaper->sendq,skb);
- 	else
- 	{
- 		struct sk_buff *tmp;
- 		/*
- 		 *	Set the packet clock out time according to the
- 		 *	frames ahead. Im sure a bit of thought could drop
- 		 *	this loop.
- 		 */
- 		for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && tmp!=ptr; tmp=tmp->next)
- 			SHAPERCB(skb)->shapeclock+=tmp->shapelen;
- 		skb_append(ptr,skb);
- 	}
-#else
 	{
 		struct sk_buff *tmp;
 		/*
@@ -220,7 +174,7 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		} else
 			skb_queue_tail(&shaper->sendq, skb);
 	}
-#endif 	
+
 	if(sh_debug)
  		printk("Frame queued.\n");
  	if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
@@ -302,7 +256,7 @@ static void shaper_kick(struct shaper *shaper)
 			 *	Pull the frame and get interrupts back on.
 			 */
 			 
-			skb_unlink(skb);
+			skb_unlink(skb, &shaper->sendq);
 			if (shaper->recovery < 
 			    SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
 				shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
diff --git a/drivers/net/sis190.c b/drivers/net/sis190.c
new file mode 100644
index 00000000000..bf3440aa6c2
--- /dev/null
+++ b/drivers/net/sis190.c
@@ -0,0 +1,1843 @@
+/*
+   sis190.c: Silicon Integrated Systems SiS190 ethernet driver
+
+   Copyright (c) 2003 K.M. Liu <kmliu@sis.com>
+   Copyright (c) 2003, 2004 Jeff Garzik <jgarzik@pobox.com>
+   Copyright (c) 2003, 2004, 2005 Francois Romieu <romieu@fr.zoreil.com>
+
+   Based on r8169.c, tg3.c, 8139cp.c, skge.c, epic100.c and SiS 190/191
+   genuine driver.
+
+   This software may be used and distributed according to the terms of
+   the GNU General Public License (GPL), incorporated herein by reference.
+   Drivers based on or derived from this code fall under the GPL and must
+   retain the authorship, copyright and license notice.  This file is not
+   a complete program and may only be used when the entire operating
+   system is licensed under the GPL.
+
+   See the file COPYING in this distribution for more information.
+
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/rtnetlink.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/pci.h>
+#include <linux/mii.h>
+#include <linux/delay.h>
+#include <linux/crc32.h>
+#include <linux/dma-mapping.h>
+#include <asm/irq.h>
+
+#define net_drv(p, arg...)	if (netif_msg_drv(p)) \
+					printk(arg)
+#define net_probe(p, arg...)	if (netif_msg_probe(p)) \
+					printk(arg)
+#define net_link(p, arg...)	if (netif_msg_link(p)) \
+					printk(arg)
+#define net_intr(p, arg...)	if (netif_msg_intr(p)) \
+					printk(arg)
+#define net_tx_err(p, arg...)	if (netif_msg_tx_err(p)) \
+					printk(arg)
+
+#define PHY_MAX_ADDR		32
+#define PHY_ID_ANY		0x1f
+#define MII_REG_ANY		0x1f
+
+#ifdef CONFIG_SIS190_NAPI
+#define NAPI_SUFFIX	"-NAPI"
+#else
+#define NAPI_SUFFIX	""
+#endif
+
+#define DRV_VERSION		"1.2" NAPI_SUFFIX
+#define DRV_NAME		"sis190"
+#define SIS190_DRIVER_NAME	DRV_NAME " Gigabit Ethernet driver " DRV_VERSION
+#define PFX DRV_NAME ": "
+
+#ifdef CONFIG_SIS190_NAPI
+#define sis190_rx_skb			netif_receive_skb
+#define sis190_rx_quota(count, quota)	min(count, quota)
+#else
+#define sis190_rx_skb			netif_rx
+#define sis190_rx_quota(count, quota)	count
+#endif
+
+#define MAC_ADDR_LEN		6
+
+#define NUM_TX_DESC		64	/* [8..1024] */
+#define NUM_RX_DESC		64	/* [8..8192] */
+#define TX_RING_BYTES		(NUM_TX_DESC * sizeof(struct TxDesc))
+#define RX_RING_BYTES		(NUM_RX_DESC * sizeof(struct RxDesc))
+#define RX_BUF_SIZE		1536
+#define RX_BUF_MASK		0xfff8
+
+#define SIS190_REGS_SIZE	0x80
+#define SIS190_TX_TIMEOUT	(6*HZ)
+#define SIS190_PHY_TIMEOUT	(10*HZ)
+#define SIS190_MSG_DEFAULT	(NETIF_MSG_DRV | NETIF_MSG_PROBE | \
+				 NETIF_MSG_LINK | NETIF_MSG_IFUP | \
+				 NETIF_MSG_IFDOWN)
+
+/* Enhanced PHY access register bit definitions */
+#define EhnMIIread		0x0000
+#define EhnMIIwrite		0x0020
+#define EhnMIIdataShift		16
+#define EhnMIIpmdShift		6	/* 7016 only */
+#define EhnMIIregShift		11
+#define EhnMIIreq		0x0010
+#define EhnMIInotDone		0x0010
+
+/* Write/read MMIO register */
+#define SIS_W8(reg, val)	writeb ((val), ioaddr + (reg))
+#define SIS_W16(reg, val)	writew ((val), ioaddr + (reg))
+#define SIS_W32(reg, val)	writel ((val), ioaddr + (reg))
+#define SIS_R8(reg)		readb (ioaddr + (reg))
+#define SIS_R16(reg)		readw (ioaddr + (reg))
+#define SIS_R32(reg)		readl (ioaddr + (reg))
+
+#define SIS_PCI_COMMIT()	SIS_R32(IntrControl)
+
+enum sis190_registers {
+	TxControl		= 0x00,
+	TxDescStartAddr		= 0x04,
+	rsv0			= 0x08,	// reserved
+	TxSts			= 0x0c,	// unused (Control/Status)
+	RxControl		= 0x10,
+	RxDescStartAddr		= 0x14,
+	rsv1			= 0x18,	// reserved
+	RxSts			= 0x1c,	// unused
+	IntrStatus		= 0x20,
+	IntrMask		= 0x24,
+	IntrControl		= 0x28,
+	IntrTimer		= 0x2c,	// unused (Interupt Timer)
+	PMControl		= 0x30,	// unused (Power Mgmt Control/Status)
+	rsv2			= 0x34,	// reserved
+	ROMControl		= 0x38,
+	ROMInterface		= 0x3c,
+	StationControl		= 0x40,
+	GMIIControl		= 0x44,
+	GIoCR			= 0x48, // unused (GMAC IO Compensation)
+	GIoCtrl			= 0x4c, // unused (GMAC IO Control)
+	TxMacControl		= 0x50,
+	TxLimit			= 0x54, // unused (Tx MAC Timer/TryLimit)
+	RGDelay			= 0x58, // unused (RGMII Tx Internal Delay)
+	rsv3			= 0x5c, // reserved
+	RxMacControl		= 0x60,
+	RxMacAddr		= 0x62,
+	RxHashTable		= 0x68,
+	// Undocumented		= 0x6c,
+	RxWolCtrl		= 0x70,
+	RxWolData		= 0x74, // unused (Rx WOL Data Access)
+	RxMPSControl		= 0x78,	// unused (Rx MPS Control)
+	rsv4			= 0x7c, // reserved
+};
+
+enum sis190_register_content {
+	/* IntrStatus */
+	SoftInt			= 0x40000000,	// unused
+	Timeup			= 0x20000000,	// unused
+	PauseFrame		= 0x00080000,	// unused
+	MagicPacket		= 0x00040000,	// unused
+	WakeupFrame		= 0x00020000,	// unused
+	LinkChange		= 0x00010000,
+	RxQEmpty		= 0x00000080,
+	RxQInt			= 0x00000040,
+	TxQ1Empty		= 0x00000020,	// unused
+	TxQ1Int			= 0x00000010,
+	TxQ0Empty		= 0x00000008,	// unused
+	TxQ0Int			= 0x00000004,
+	RxHalt			= 0x00000002,
+	TxHalt			= 0x00000001,
+
+	/* {Rx/Tx}CmdBits */
+	CmdReset		= 0x10,
+	CmdRxEnb		= 0x08,		// unused
+	CmdTxEnb		= 0x01,
+	RxBufEmpty		= 0x01,		// unused
+
+	/* Cfg9346Bits */
+	Cfg9346_Lock		= 0x00,		// unused
+	Cfg9346_Unlock		= 0xc0,		// unused
+
+	/* RxMacControl */
+	AcceptErr		= 0x20,		// unused
+	AcceptRunt		= 0x10,		// unused
+	AcceptBroadcast		= 0x0800,
+	AcceptMulticast		= 0x0400,
+	AcceptMyPhys		= 0x0200,
+	AcceptAllPhys		= 0x0100,
+
+	/* RxConfigBits */
+	RxCfgFIFOShift		= 13,
+	RxCfgDMAShift		= 8,		// 0x1a in RxControl ?
+
+	/* TxConfigBits */
+	TxInterFrameGapShift	= 24,
+	TxDMAShift		= 8, /* DMA burst value (0-7) is shift this many bits */
+
+	/* StationControl */
+	_1000bpsF		= 0x1c00,
+	_1000bpsH		= 0x0c00,
+	_100bpsF		= 0x1800,
+	_100bpsH		= 0x0800,
+	_10bpsF			= 0x1400,
+	_10bpsH			= 0x0400,
+
+	LinkStatus		= 0x02,		// unused
+	FullDup			= 0x01,		// unused
+
+	/* TBICSRBit */
+	TBILinkOK		= 0x02000000,	// unused
+};
+
+struct TxDesc {
+	__le32 PSize;
+	__le32 status;
+	__le32 addr;
+	__le32 size;
+};
+
+struct RxDesc {
+	__le32 PSize;
+	__le32 status;
+	__le32 addr;
+	__le32 size;
+};
+
+enum _DescStatusBit {
+	/* _Desc.status */
+	OWNbit		= 0x80000000, // RXOWN/TXOWN
+	INTbit		= 0x40000000, // RXINT/TXINT
+	CRCbit		= 0x00020000, // CRCOFF/CRCEN
+	PADbit		= 0x00010000, // PREADD/PADEN
+	/* _Desc.size */
+	RingEnd		= 0x80000000,
+	/* TxDesc.status */
+	LSEN		= 0x08000000, // TSO ? -- FR
+	IPCS		= 0x04000000,
+	TCPCS		= 0x02000000,
+	UDPCS		= 0x01000000,
+	BSTEN		= 0x00800000,
+	EXTEN		= 0x00400000,
+	DEFEN		= 0x00200000,
+	BKFEN		= 0x00100000,
+	CRSEN		= 0x00080000,
+	COLEN		= 0x00040000,
+	THOL3		= 0x30000000,
+	THOL2		= 0x20000000,
+	THOL1		= 0x10000000,
+	THOL0		= 0x00000000,
+	/* RxDesc.status */
+	IPON		= 0x20000000,
+	TCPON		= 0x10000000,
+	UDPON		= 0x08000000,
+	Wakup		= 0x00400000,
+	Magic		= 0x00200000,
+	Pause		= 0x00100000,
+	DEFbit		= 0x00200000,
+	BCAST		= 0x000c0000,
+	MCAST		= 0x00080000,
+	UCAST		= 0x00040000,
+	/* RxDesc.PSize */
+	TAGON		= 0x80000000,
+	RxDescCountMask	= 0x7f000000, // multi-desc pkt when > 1 ? -- FR
+	ABORT		= 0x00800000,
+	SHORT		= 0x00400000,
+	LIMIT		= 0x00200000,
+	MIIER		= 0x00100000,
+	OVRUN		= 0x00080000,
+	NIBON		= 0x00040000,
+	COLON		= 0x00020000,
+	CRCOK		= 0x00010000,
+	RxSizeMask	= 0x0000ffff
+	/*
+	 * The asic could apparently do vlan, TSO, jumbo (sis191 only) and
+	 * provide two (unused with Linux) Tx queues. No publically
+	 * available documentation alas.
+	 */
+};
+
+enum sis190_eeprom_access_register_bits {
+	EECS	= 0x00000001,	// unused
+	EECLK	= 0x00000002,	// unused
+	EEDO	= 0x00000008,	// unused
+	EEDI	= 0x00000004,	// unused
+	EEREQ	= 0x00000080,
+	EEROP	= 0x00000200,
+	EEWOP	= 0x00000100	// unused
+};
+
+/* EEPROM Addresses */
+enum sis190_eeprom_address {
+	EEPROMSignature	= 0x00,
+	EEPROMCLK	= 0x01,	// unused
+	EEPROMInfo	= 0x02,
+	EEPROMMACAddr	= 0x03
+};
+
+struct sis190_private {
+	void __iomem *mmio_addr;
+	struct pci_dev *pci_dev;
+	struct net_device_stats stats;
+	spinlock_t lock;
+	u32 rx_buf_sz;
+	u32 cur_rx;
+	u32 cur_tx;
+	u32 dirty_rx;
+	u32 dirty_tx;
+	dma_addr_t rx_dma;
+	dma_addr_t tx_dma;
+	struct RxDesc *RxDescRing;
+	struct TxDesc *TxDescRing;
+	struct sk_buff *Rx_skbuff[NUM_RX_DESC];
+	struct sk_buff *Tx_skbuff[NUM_TX_DESC];
+	struct work_struct phy_task;
+	struct timer_list timer;
+	u32 msg_enable;
+	struct mii_if_info mii_if;
+	struct list_head first_phy;
+};
+
+struct sis190_phy {
+	struct list_head list;
+	int phy_id;
+	u16 id[2];
+	u16 status;
+	u8  type;
+};
+
+enum sis190_phy_type {
+	UNKNOWN	= 0x00,
+	HOME	= 0x01,
+	LAN	= 0x02,
+	MIX	= 0x03
+};
+
+static struct mii_chip_info {
+        const char *name;
+        u16 id[2];
+        unsigned int type;
+} mii_chip_table[] = {
+	{ "Broadcom PHY BCM5461", { 0x0020, 0x60c0 }, LAN },
+	{ "Agere PHY ET1101B",    { 0x0282, 0xf010 }, LAN },
+	{ "Marvell PHY 88E1111",  { 0x0141, 0x0cc0 }, LAN },
+	{ "Realtek PHY RTL8201",  { 0x0000, 0x8200 }, LAN },
+	{ NULL, }
+};
+
+const static struct {
+	const char *name;
+	u8 version;		/* depend on docs */
+	u32 RxConfigMask;	/* clear the bits supported by this chip */
+} sis_chip_info[] = {
+	{ DRV_NAME, 0x00, 0xff7e1880, },
+};
+
+static struct pci_device_id sis190_pci_tbl[] __devinitdata = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_SI, 0x0190), 0, 0, 0 },
+	{ 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, sis190_pci_tbl);
+
+static int rx_copybreak = 200;
+
+static struct {
+	u32 msg_enable;
+} debug = { -1 };
+
+MODULE_DESCRIPTION("SiS sis190 Gigabit Ethernet driver");
+module_param(rx_copybreak, int, 0);
+MODULE_PARM_DESC(rx_copybreak, "Copy breakpoint for copy-only-tiny-frames");
+module_param_named(debug, debug.msg_enable, int, 0);
+MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., 16=all)");
+MODULE_AUTHOR("K.M. Liu <kmliu@sis.com>, Ueimor <romieu@fr.zoreil.com>");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
+
+static const u32 sis190_intr_mask =
+	RxQEmpty | RxQInt | TxQ1Int | TxQ0Int | RxHalt | TxHalt;
+
+/*
+ * Maximum number of multicast addresses to filter (vs. Rx-all-multicast).
+ * The chips use a 64 element hash table based on the Ethernet CRC.
+ */
+static int multicast_filter_limit = 32;
+
+static void __mdio_cmd(void __iomem *ioaddr, u32 ctl)
+{
+	unsigned int i;
+
+	SIS_W32(GMIIControl, ctl);
+
+	msleep(1);
+
+	for (i = 0; i < 100; i++) {
+		if (!(SIS_R32(GMIIControl) & EhnMIInotDone))
+			break;
+		msleep(1);
+	}
+
+	if (i > 999)
+		printk(KERN_ERR PFX "PHY command failed !\n");
+}
+
+static void mdio_write(void __iomem *ioaddr, int phy_id, int reg, int val)
+{
+	__mdio_cmd(ioaddr, EhnMIIreq | EhnMIIwrite |
+		(((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift) |
+		(((u32) val) << EhnMIIdataShift));
+}
+
+static int mdio_read(void __iomem *ioaddr, int phy_id, int reg)
+{
+	__mdio_cmd(ioaddr, EhnMIIreq | EhnMIIread |
+		(((u32) reg) << EhnMIIregShift) | (phy_id << EhnMIIpmdShift));
+
+	return (u16) (SIS_R32(GMIIControl) >> EhnMIIdataShift);
+}
+
+static void __mdio_write(struct net_device *dev, int phy_id, int reg, int val)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	mdio_write(tp->mmio_addr, phy_id, reg, val);
+}
+
+static int __mdio_read(struct net_device *dev, int phy_id, int reg)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mdio_read(tp->mmio_addr, phy_id, reg);
+}
+
+static u16 mdio_read_latched(void __iomem *ioaddr, int phy_id, int reg)
+{
+	mdio_read(ioaddr, phy_id, reg);
+	return mdio_read(ioaddr, phy_id, reg);
+}
+
+static u16 __devinit sis190_read_eeprom(void __iomem *ioaddr, u32 reg)
+{
+	u16 data = 0xffff;
+	unsigned int i;
+
+	if (!(SIS_R32(ROMControl) & 0x0002))
+		return 0;
+
+	SIS_W32(ROMInterface, EEREQ | EEROP | (reg << 10));
+
+	for (i = 0; i < 200; i++) {
+		if (!(SIS_R32(ROMInterface) & EEREQ)) {
+			data = (SIS_R32(ROMInterface) & 0xffff0000) >> 16;
+			break;
+		}
+		msleep(1);
+	}
+
+	return data;
+}
+
+static void sis190_irq_mask_and_ack(void __iomem *ioaddr)
+{
+	SIS_W32(IntrMask, 0x00);
+	SIS_W32(IntrStatus, 0xffffffff);
+	SIS_PCI_COMMIT();
+}
+
+static void sis190_asic_down(void __iomem *ioaddr)
+{
+	/* Stop the chip's Tx and Rx DMA processes. */
+
+	SIS_W32(TxControl, 0x1a00);
+	SIS_W32(RxControl, 0x1a00);
+
+	sis190_irq_mask_and_ack(ioaddr);
+}
+
+static void sis190_mark_as_last_descriptor(struct RxDesc *desc)
+{
+	desc->size |= cpu_to_le32(RingEnd);
+}
+
+static inline void sis190_give_to_asic(struct RxDesc *desc, u32 rx_buf_sz)
+{
+	u32 eor = le32_to_cpu(desc->size) & RingEnd;
+
+	desc->PSize = 0x0;
+	desc->size = cpu_to_le32((rx_buf_sz & RX_BUF_MASK) | eor);
+	wmb();
+	desc->status = cpu_to_le32(OWNbit | INTbit);
+}
+
+static inline void sis190_map_to_asic(struct RxDesc *desc, dma_addr_t mapping,
+				      u32 rx_buf_sz)
+{
+	desc->addr = cpu_to_le32(mapping);
+	sis190_give_to_asic(desc, rx_buf_sz);
+}
+
+static inline void sis190_make_unusable_by_asic(struct RxDesc *desc)
+{
+	desc->PSize = 0x0;
+	desc->addr = 0xdeadbeef;
+	desc->size &= cpu_to_le32(RingEnd);
+	wmb();
+	desc->status = 0x0;
+}
+
+static int sis190_alloc_rx_skb(struct pci_dev *pdev, struct sk_buff **sk_buff,
+			       struct RxDesc *desc, u32 rx_buf_sz)
+{
+	struct sk_buff *skb;
+	dma_addr_t mapping;
+	int ret = 0;
+
+	skb = dev_alloc_skb(rx_buf_sz);
+	if (!skb)
+		goto err_out;
+
+	*sk_buff = skb;
+
+	mapping = pci_map_single(pdev, skb->data, rx_buf_sz,
+				 PCI_DMA_FROMDEVICE);
+
+	sis190_map_to_asic(desc, mapping, rx_buf_sz);
+out:
+	return ret;
+
+err_out:
+	ret = -ENOMEM;
+	sis190_make_unusable_by_asic(desc);
+	goto out;
+}
+
+static u32 sis190_rx_fill(struct sis190_private *tp, struct net_device *dev,
+			  u32 start, u32 end)
+{
+	u32 cur;
+
+	for (cur = start; cur < end; cur++) {
+		int ret, i = cur % NUM_RX_DESC;
+
+		if (tp->Rx_skbuff[i])
+			continue;
+
+		ret = sis190_alloc_rx_skb(tp->pci_dev, tp->Rx_skbuff + i,
+					  tp->RxDescRing + i, tp->rx_buf_sz);
+		if (ret < 0)
+			break;
+	}
+	return cur - start;
+}
+
+static inline int sis190_try_rx_copy(struct sk_buff **sk_buff, int pkt_size,
+				     struct RxDesc *desc, int rx_buf_sz)
+{
+	int ret = -1;
+
+	if (pkt_size < rx_copybreak) {
+		struct sk_buff *skb;
+
+		skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
+		if (skb) {
+			skb_reserve(skb, NET_IP_ALIGN);
+			eth_copy_and_sum(skb, sk_buff[0]->data, pkt_size, 0);
+			*sk_buff = skb;
+			sis190_give_to_asic(desc, rx_buf_sz);
+			ret = 0;
+		}
+	}
+	return ret;
+}
+
+static inline int sis190_rx_pkt_err(u32 status, struct net_device_stats *stats)
+{
+#define ErrMask	(OVRUN | SHORT | LIMIT | MIIER | NIBON | COLON | ABORT)
+
+	if ((status & CRCOK) && !(status & ErrMask))
+		return 0;
+
+	if (!(status & CRCOK))
+		stats->rx_crc_errors++;
+	else if (status & OVRUN)
+		stats->rx_over_errors++;
+	else if (status & (SHORT | LIMIT))
+		stats->rx_length_errors++;
+	else if (status & (MIIER | NIBON | COLON))
+		stats->rx_frame_errors++;
+
+	stats->rx_errors++;
+	return -1;
+}
+
+static int sis190_rx_interrupt(struct net_device *dev,
+			       struct sis190_private *tp, void __iomem *ioaddr)
+{
+	struct net_device_stats *stats = &tp->stats;
+	u32 rx_left, cur_rx = tp->cur_rx;
+	u32 delta, count;
+
+	rx_left = NUM_RX_DESC + tp->dirty_rx - cur_rx;
+	rx_left = sis190_rx_quota(rx_left, (u32) dev->quota);
+
+	for (; rx_left > 0; rx_left--, cur_rx++) {
+		unsigned int entry = cur_rx % NUM_RX_DESC;
+		struct RxDesc *desc = tp->RxDescRing + entry;
+		u32 status;
+
+		if (desc->status & OWNbit)
+			break;
+
+		status = le32_to_cpu(desc->PSize);
+
+		// net_intr(tp, KERN_INFO "%s: Rx PSize = %08x.\n", dev->name,
+		//	 status);
+
+		if (sis190_rx_pkt_err(status, stats) < 0)
+			sis190_give_to_asic(desc, tp->rx_buf_sz);
+		else {
+			struct sk_buff *skb = tp->Rx_skbuff[entry];
+			int pkt_size = (status & RxSizeMask) - 4;
+			void (*pci_action)(struct pci_dev *, dma_addr_t,
+				size_t, int) = pci_dma_sync_single_for_device;
+
+			if (unlikely(pkt_size > tp->rx_buf_sz)) {
+				net_intr(tp, KERN_INFO
+					 "%s: (frag) status = %08x.\n",
+					 dev->name, status);
+				stats->rx_dropped++;
+				stats->rx_length_errors++;
+				sis190_give_to_asic(desc, tp->rx_buf_sz);
+				continue;
+			}
+
+			pci_dma_sync_single_for_cpu(tp->pci_dev,
+				le32_to_cpu(desc->addr), tp->rx_buf_sz,
+				PCI_DMA_FROMDEVICE);
+
+			if (sis190_try_rx_copy(&skb, pkt_size, desc,
+					       tp->rx_buf_sz)) {
+				pci_action = pci_unmap_single;
+				tp->Rx_skbuff[entry] = NULL;
+				sis190_make_unusable_by_asic(desc);
+			}
+
+			pci_action(tp->pci_dev, le32_to_cpu(desc->addr),
+				   tp->rx_buf_sz, PCI_DMA_FROMDEVICE);
+
+			skb->dev = dev;
+			skb_put(skb, pkt_size);
+			skb->protocol = eth_type_trans(skb, dev);
+
+			sis190_rx_skb(skb);
+
+			dev->last_rx = jiffies;
+			stats->rx_packets++;
+			stats->rx_bytes += pkt_size;
+			if ((status & BCAST) == MCAST)
+				stats->multicast++;
+		}
+	}
+	count = cur_rx - tp->cur_rx;
+	tp->cur_rx = cur_rx;
+
+	delta = sis190_rx_fill(tp, dev, tp->dirty_rx, tp->cur_rx);
+	if (!delta && count && netif_msg_intr(tp))
+		printk(KERN_INFO "%s: no Rx buffer allocated.\n", dev->name);
+	tp->dirty_rx += delta;
+
+	if (((tp->dirty_rx + NUM_RX_DESC) == tp->cur_rx) && netif_msg_intr(tp))
+		printk(KERN_EMERG "%s: Rx buffers exhausted.\n", dev->name);
+
+	return count;
+}
+
+static void sis190_unmap_tx_skb(struct pci_dev *pdev, struct sk_buff *skb,
+				struct TxDesc *desc)
+{
+	unsigned int len;
+
+	len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+	pci_unmap_single(pdev, le32_to_cpu(desc->addr), len, PCI_DMA_TODEVICE);
+
+	memset(desc, 0x00, sizeof(*desc));
+}
+
+static void sis190_tx_interrupt(struct net_device *dev,
+				struct sis190_private *tp, void __iomem *ioaddr)
+{
+	u32 pending, dirty_tx = tp->dirty_tx;
+	/*
+	 * It would not be needed if queueing was allowed to be enabled
+	 * again too early (hint: think preempt and unclocked smp systems).
+	 */
+	unsigned int queue_stopped;
+
+	smp_rmb();
+	pending = tp->cur_tx - dirty_tx;
+	queue_stopped = (pending == NUM_TX_DESC);
+
+	for (; pending; pending--, dirty_tx++) {
+		unsigned int entry = dirty_tx % NUM_TX_DESC;
+		struct TxDesc *txd = tp->TxDescRing + entry;
+		struct sk_buff *skb;
+
+		if (le32_to_cpu(txd->status) & OWNbit)
+			break;
+
+		skb = tp->Tx_skbuff[entry];
+
+		tp->stats.tx_packets++;
+		tp->stats.tx_bytes += skb->len;
+
+		sis190_unmap_tx_skb(tp->pci_dev, skb, txd);
+		tp->Tx_skbuff[entry] = NULL;
+		dev_kfree_skb_irq(skb);
+	}
+
+	if (tp->dirty_tx != dirty_tx) {
+		tp->dirty_tx = dirty_tx;
+		smp_wmb();
+		if (queue_stopped)
+			netif_wake_queue(dev);
+	}
+}
+
+/*
+ * The interrupt handler does all of the Rx thread work and cleans up after
+ * the Tx thread.
+ */
+static irqreturn_t sis190_interrupt(int irq, void *__dev, struct pt_regs *regs)
+{
+	struct net_device *dev = __dev;
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int handled = 0;
+	u32 status;
+
+	status = SIS_R32(IntrStatus);
+
+	if ((status == 0xffffffff) || !status)
+		goto out;
+
+	handled = 1;
+
+	if (unlikely(!netif_running(dev))) {
+		sis190_asic_down(ioaddr);
+		goto out;
+	}
+
+	SIS_W32(IntrStatus, status);
+
+	// net_intr(tp, KERN_INFO "%s: status = %08x.\n", dev->name, status);
+
+	if (status & LinkChange) {
+		net_intr(tp, KERN_INFO "%s: link change.\n", dev->name);
+		schedule_work(&tp->phy_task);
+	}
+
+	if (status & RxQInt)
+		sis190_rx_interrupt(dev, tp, ioaddr);
+
+	if (status & TxQ0Int)
+		sis190_tx_interrupt(dev, tp, ioaddr);
+out:
+	return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sis190_netpoll(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+
+	disable_irq(pdev->irq);
+	sis190_interrupt(pdev->irq, dev, NULL);
+	enable_irq(pdev->irq);
+}
+#endif
+
+static void sis190_free_rx_skb(struct sis190_private *tp,
+			       struct sk_buff **sk_buff, struct RxDesc *desc)
+{
+	struct pci_dev *pdev = tp->pci_dev;
+
+	pci_unmap_single(pdev, le32_to_cpu(desc->addr), tp->rx_buf_sz,
+			 PCI_DMA_FROMDEVICE);
+	dev_kfree_skb(*sk_buff);
+	*sk_buff = NULL;
+	sis190_make_unusable_by_asic(desc);
+}
+
+static void sis190_rx_clear(struct sis190_private *tp)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_RX_DESC; i++) {
+		if (!tp->Rx_skbuff[i])
+			continue;
+		sis190_free_rx_skb(tp, tp->Rx_skbuff + i, tp->RxDescRing + i);
+	}
+}
+
+static void sis190_init_ring_indexes(struct sis190_private *tp)
+{
+	tp->dirty_tx = tp->dirty_rx = tp->cur_tx = tp->cur_rx = 0;
+}
+
+static int sis190_init_ring(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	sis190_init_ring_indexes(tp);
+
+	memset(tp->Tx_skbuff, 0x0, NUM_TX_DESC * sizeof(struct sk_buff *));
+	memset(tp->Rx_skbuff, 0x0, NUM_RX_DESC * sizeof(struct sk_buff *));
+
+	if (sis190_rx_fill(tp, dev, 0, NUM_RX_DESC) != NUM_RX_DESC)
+		goto err_rx_clear;
+
+	sis190_mark_as_last_descriptor(tp->RxDescRing + NUM_RX_DESC - 1);
+
+	return 0;
+
+err_rx_clear:
+	sis190_rx_clear(tp);
+	return -ENOMEM;
+}
+
+static void sis190_set_rx_mode(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned long flags;
+	u32 mc_filter[2];	/* Multicast hash filter */
+	u16 rx_mode;
+
+	if (dev->flags & IFF_PROMISC) {
+		/* Unconditionally log net taps. */
+		net_drv(tp, KERN_NOTICE "%s: Promiscuous mode enabled.\n",
+			dev->name);
+		rx_mode =
+			AcceptBroadcast | AcceptMulticast | AcceptMyPhys |
+			AcceptAllPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else if ((dev->mc_count > multicast_filter_limit) ||
+		   (dev->flags & IFF_ALLMULTI)) {
+		/* Too many to filter perfectly -- accept all multicasts. */
+		rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0xffffffff;
+	} else {
+		struct dev_mc_list *mclist;
+		unsigned int i;
+
+		rx_mode = AcceptBroadcast | AcceptMyPhys;
+		mc_filter[1] = mc_filter[0] = 0;
+		for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
+		     i++, mclist = mclist->next) {
+			int bit_nr =
+				ether_crc(ETH_ALEN, mclist->dmi_addr) >> 26;
+			mc_filter[bit_nr >> 5] |= 1 << (bit_nr & 31);
+			rx_mode |= AcceptMulticast;
+		}
+	}
+
+	spin_lock_irqsave(&tp->lock, flags);
+
+	SIS_W16(RxMacControl, rx_mode | 0x2);
+	SIS_W32(RxHashTable, mc_filter[0]);
+	SIS_W32(RxHashTable + 4, mc_filter[1]);
+
+	spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static void sis190_soft_reset(void __iomem *ioaddr)
+{
+	SIS_W32(IntrControl, 0x8000);
+	SIS_PCI_COMMIT();
+	msleep(1);
+	SIS_W32(IntrControl, 0x0);
+	sis190_asic_down(ioaddr);
+	msleep(1);
+}
+
+static void sis190_hw_start(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+
+	sis190_soft_reset(ioaddr);
+
+	SIS_W32(TxDescStartAddr, tp->tx_dma);
+	SIS_W32(RxDescStartAddr, tp->rx_dma);
+
+	SIS_W32(IntrStatus, 0xffffffff);
+	SIS_W32(IntrMask, 0x0);
+	/*
+	 * Default is 100Mbps.
+	 * A bit strange: 100Mbps is 0x1801 elsewhere -- FR 2005/06/09
+	 */
+	SIS_W16(StationControl, 0x1901);
+	SIS_W32(GMIIControl, 0x0);
+	SIS_W32(TxMacControl, 0x60);
+	SIS_W16(RxMacControl, 0x02);
+	SIS_W32(RxHashTable, 0x0);
+	SIS_W32(0x6c, 0x0);
+	SIS_W32(RxWolCtrl, 0x0);
+	SIS_W32(RxWolData, 0x0);
+
+	SIS_PCI_COMMIT();
+
+	sis190_set_rx_mode(dev);
+
+	/* Enable all known interrupts by setting the interrupt mask. */
+	SIS_W32(IntrMask, sis190_intr_mask);
+
+	SIS_W32(TxControl, 0x1a00 | CmdTxEnb);
+	SIS_W32(RxControl, 0x1a1d);
+
+	netif_start_queue(dev);
+}
+
+static void sis190_phy_task(void * data)
+{
+	struct net_device *dev = data;
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id = tp->mii_if.phy_id;
+	u16 val;
+
+	rtnl_lock();
+
+	val = mdio_read(ioaddr, phy_id, MII_BMCR);
+	if (val & BMCR_RESET) {
+		// FIXME: needlessly high ?  -- FR 02/07/2005
+		mod_timer(&tp->timer, jiffies + HZ/10);
+	} else if (!(mdio_read_latched(ioaddr, phy_id, MII_BMSR) &
+		     BMSR_ANEGCOMPLETE)) {
+		net_link(tp, KERN_WARNING "%s: PHY reset until link up.\n",
+			 dev->name);
+		mdio_write(ioaddr, phy_id, MII_BMCR, val | BMCR_RESET);
+		mod_timer(&tp->timer, jiffies + SIS190_PHY_TIMEOUT);
+	} else {
+		/* Rejoice ! */
+		struct {
+			int val;
+			const char *msg;
+			u16 ctl;
+		} reg31[] = {
+			{ LPA_1000XFULL | LPA_SLCT,
+				"1000 Mbps Full Duplex",
+				0x01 | _1000bpsF },
+			{ LPA_1000XHALF | LPA_SLCT,
+				"1000 Mbps Half Duplex",
+				0x01 | _1000bpsH },
+			{ LPA_100FULL,
+				"100 Mbps Full Duplex",
+				0x01 | _100bpsF },
+			{ LPA_100HALF,
+				"100 Mbps Half Duplex",
+				0x01 | _100bpsH },
+			{ LPA_10FULL,
+				"10 Mbps Full Duplex",
+				0x01 | _10bpsF },
+			{ LPA_10HALF,
+				"10 Mbps Half Duplex",
+				0x01 | _10bpsH },
+			{ 0, "unknown", 0x0000 }
+		}, *p;
+		u16 adv;
+
+		val = mdio_read(ioaddr, phy_id, 0x1f);
+		net_link(tp, KERN_INFO "%s: mii ext = %04x.\n", dev->name, val);
+
+		val = mdio_read(ioaddr, phy_id, MII_LPA);
+		adv = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+		net_link(tp, KERN_INFO "%s: mii lpa = %04x adv = %04x.\n",
+			 dev->name, val, adv);
+
+		val &= adv;
+
+		for (p = reg31; p->ctl; p++) {
+			if ((val & p->val) == p->val)
+				break;
+		}
+		if (p->ctl)
+			SIS_W16(StationControl, p->ctl);
+		net_link(tp, KERN_INFO "%s: link on %s mode.\n", dev->name,
+			 p->msg);
+		netif_carrier_on(dev);
+	}
+
+	rtnl_unlock();
+}
+
+static void sis190_phy_timer(unsigned long __opaque)
+{
+	struct net_device *dev = (struct net_device *)__opaque;
+	struct sis190_private *tp = netdev_priv(dev);
+
+	if (likely(netif_running(dev)))
+		schedule_work(&tp->phy_task);
+}
+
+static inline void sis190_delete_timer(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	del_timer_sync(&tp->timer);
+}
+
+static inline void sis190_request_timer(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct timer_list *timer = &tp->timer;
+
+	init_timer(timer);
+	timer->expires = jiffies + SIS190_PHY_TIMEOUT;
+	timer->data = (unsigned long)dev;
+	timer->function = sis190_phy_timer;
+	add_timer(timer);
+}
+
+static void sis190_set_rxbufsize(struct sis190_private *tp,
+				 struct net_device *dev)
+{
+	unsigned int mtu = dev->mtu;
+
+	tp->rx_buf_sz = (mtu > RX_BUF_SIZE) ? mtu + ETH_HLEN + 8 : RX_BUF_SIZE;
+	/* RxDesc->size has a licence to kill the lower bits */
+	if (tp->rx_buf_sz & 0x07) {
+		tp->rx_buf_sz += 8;
+		tp->rx_buf_sz &= RX_BUF_MASK;
+	}
+}
+
+static int sis190_open(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+	int rc = -ENOMEM;
+
+	sis190_set_rxbufsize(tp, dev);
+
+	/*
+	 * Rx and Tx descriptors need 256 bytes alignment.
+	 * pci_alloc_consistent() guarantees a stronger alignment.
+	 */
+	tp->TxDescRing = pci_alloc_consistent(pdev, TX_RING_BYTES, &tp->tx_dma);
+	if (!tp->TxDescRing)
+		goto out;
+
+	tp->RxDescRing = pci_alloc_consistent(pdev, RX_RING_BYTES, &tp->rx_dma);
+	if (!tp->RxDescRing)
+		goto err_free_tx_0;
+
+	rc = sis190_init_ring(dev);
+	if (rc < 0)
+		goto err_free_rx_1;
+
+	INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+	sis190_request_timer(dev);
+
+	rc = request_irq(dev->irq, sis190_interrupt, SA_SHIRQ, dev->name, dev);
+	if (rc < 0)
+		goto err_release_timer_2;
+
+	sis190_hw_start(dev);
+out:
+	return rc;
+
+err_release_timer_2:
+	sis190_delete_timer(dev);
+	sis190_rx_clear(tp);
+err_free_rx_1:
+	pci_free_consistent(tp->pci_dev, RX_RING_BYTES, tp->RxDescRing,
+		tp->rx_dma);
+err_free_tx_0:
+	pci_free_consistent(tp->pci_dev, TX_RING_BYTES, tp->TxDescRing,
+		tp->tx_dma);
+	goto out;
+}
+
+static void sis190_tx_clear(struct sis190_private *tp)
+{
+	unsigned int i;
+
+	for (i = 0; i < NUM_TX_DESC; i++) {
+		struct sk_buff *skb = tp->Tx_skbuff[i];
+
+		if (!skb)
+			continue;
+
+		sis190_unmap_tx_skb(tp->pci_dev, skb, tp->TxDescRing + i);
+		tp->Tx_skbuff[i] = NULL;
+		dev_kfree_skb(skb);
+
+		tp->stats.tx_dropped++;
+	}
+	tp->cur_tx = tp->dirty_tx = 0;
+}
+
+static void sis190_down(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	unsigned int poll_locked = 0;
+
+	sis190_delete_timer(dev);
+
+	netif_stop_queue(dev);
+
+	flush_scheduled_work();
+
+	do {
+		spin_lock_irq(&tp->lock);
+
+		sis190_asic_down(ioaddr);
+
+		spin_unlock_irq(&tp->lock);
+
+		synchronize_irq(dev->irq);
+
+		if (!poll_locked) {
+			netif_poll_disable(dev);
+			poll_locked++;
+		}
+
+		synchronize_sched();
+
+	} while (SIS_R32(IntrMask));
+
+	sis190_tx_clear(tp);
+	sis190_rx_clear(tp);
+}
+
+static int sis190_close(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *pdev = tp->pci_dev;
+
+	sis190_down(dev);
+
+	free_irq(dev->irq, dev);
+
+	netif_poll_enable(dev);
+
+	pci_free_consistent(pdev, TX_RING_BYTES, tp->TxDescRing, tp->tx_dma);
+	pci_free_consistent(pdev, RX_RING_BYTES, tp->RxDescRing, tp->rx_dma);
+
+	tp->TxDescRing = NULL;
+	tp->RxDescRing = NULL;
+
+	return 0;
+}
+
+static int sis190_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u32 len, entry, dirty_tx;
+	struct TxDesc *desc;
+	dma_addr_t mapping;
+
+	if (unlikely(skb->len < ETH_ZLEN)) {
+		skb = skb_padto(skb, ETH_ZLEN);
+		if (!skb) {
+			tp->stats.tx_dropped++;
+			goto out;
+		}
+		len = ETH_ZLEN;
+	} else {
+		len = skb->len;
+	}
+
+	entry = tp->cur_tx % NUM_TX_DESC;
+	desc = tp->TxDescRing + entry;
+
+	if (unlikely(le32_to_cpu(desc->status) & OWNbit)) {
+		netif_stop_queue(dev);
+		net_tx_err(tp, KERN_ERR PFX
+			   "%s: BUG! Tx Ring full when queue awake!\n",
+			   dev->name);
+		return NETDEV_TX_BUSY;
+	}
+
+	mapping = pci_map_single(tp->pci_dev, skb->data, len, PCI_DMA_TODEVICE);
+
+	tp->Tx_skbuff[entry] = skb;
+
+	desc->PSize = cpu_to_le32(len);
+	desc->addr = cpu_to_le32(mapping);
+
+	desc->size = cpu_to_le32(len);
+	if (entry == (NUM_TX_DESC - 1))
+		desc->size |= cpu_to_le32(RingEnd);
+
+	wmb();
+
+	desc->status = cpu_to_le32(OWNbit | INTbit | DEFbit | CRCbit | PADbit);
+
+	tp->cur_tx++;
+
+	smp_wmb();
+
+	SIS_W32(TxControl, 0x1a00 | CmdReset | CmdTxEnb);
+
+	dev->trans_start = jiffies;
+
+	dirty_tx = tp->dirty_tx;
+	if ((tp->cur_tx - NUM_TX_DESC) == dirty_tx) {
+		netif_stop_queue(dev);
+		smp_rmb();
+		if (dirty_tx != tp->dirty_tx)
+			netif_wake_queue(dev);
+	}
+out:
+	return NETDEV_TX_OK;
+}
+
+static struct net_device_stats *sis190_get_stats(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return &tp->stats;
+}
+
+static void sis190_free_phy(struct list_head *first_phy)
+{
+	struct sis190_phy *cur, *next;
+
+	list_for_each_entry_safe(cur, next, first_phy, list) {
+		kfree(cur);
+	}
+}
+
+/**
+ *	sis190_default_phy - Select default PHY for sis190 mac.
+ *	@dev: the net device to probe for
+ *
+ *	Select first detected PHY with link as default.
+ *	If no one is link on, select PHY whose types is HOME as default.
+ *	If HOME doesn't exist, select LAN.
+ */
+static u16 sis190_default_phy(struct net_device *dev)
+{
+	struct sis190_phy *phy, *phy_home, *phy_default, *phy_lan;
+	struct sis190_private *tp = netdev_priv(dev);
+	struct mii_if_info *mii_if = &tp->mii_if;
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 status;
+
+	phy_home = phy_default = phy_lan = NULL;
+
+	list_for_each_entry(phy, &tp->first_phy, list) {
+		status = mdio_read_latched(ioaddr, phy->phy_id, MII_BMSR);
+
+		// Link ON & Not select default PHY & not ghost PHY.
+		if ((status & BMSR_LSTATUS) &&
+		    !phy_default &&
+		    (phy->type != UNKNOWN)) {
+			phy_default = phy;
+		} else {
+			status = mdio_read(ioaddr, phy->phy_id, MII_BMCR);
+			mdio_write(ioaddr, phy->phy_id, MII_BMCR,
+				   status | BMCR_ANENABLE | BMCR_ISOLATE);
+			if (phy->type == HOME)
+				phy_home = phy;
+			else if (phy->type == LAN)
+				phy_lan = phy;
+		}
+	}
+
+	if (!phy_default) {
+		if (phy_home)
+			phy_default = phy_home;
+		else if (phy_lan)
+			phy_default = phy_lan;
+		else
+			phy_default = list_entry(&tp->first_phy,
+						 struct sis190_phy, list);
+	}
+
+	if (mii_if->phy_id != phy_default->phy_id) {
+		mii_if->phy_id = phy_default->phy_id;
+		net_probe(tp, KERN_INFO
+		       "%s: Using transceiver at address %d as default.\n",
+		       pci_name(tp->pci_dev), mii_if->phy_id);
+	}
+
+	status = mdio_read(ioaddr, mii_if->phy_id, MII_BMCR);
+	status &= (~BMCR_ISOLATE);
+
+	mdio_write(ioaddr, mii_if->phy_id, MII_BMCR, status);
+	status = mdio_read_latched(ioaddr, mii_if->phy_id, MII_BMSR);
+
+	return status;
+}
+
+static void sis190_init_phy(struct net_device *dev, struct sis190_private *tp,
+			    struct sis190_phy *phy, unsigned int phy_id,
+			    u16 mii_status)
+{
+	void __iomem *ioaddr = tp->mmio_addr;
+	struct mii_chip_info *p;
+
+	INIT_LIST_HEAD(&phy->list);
+	phy->status = mii_status;
+	phy->phy_id = phy_id;
+
+	phy->id[0] = mdio_read(ioaddr, phy_id, MII_PHYSID1);
+	phy->id[1] = mdio_read(ioaddr, phy_id, MII_PHYSID2);
+
+	for (p = mii_chip_table; p->type; p++) {
+		if ((p->id[0] == phy->id[0]) &&
+		    (p->id[1] == (phy->id[1] & 0xfff0))) {
+			break;
+		}
+	}
+
+	if (p->id[1]) {
+		phy->type = (p->type == MIX) ?
+			((mii_status & (BMSR_100FULL | BMSR_100HALF)) ?
+				LAN : HOME) : p->type;
+	} else
+		phy->type = UNKNOWN;
+
+	net_probe(tp, KERN_INFO "%s: %s transceiver at address %d.\n",
+		  pci_name(tp->pci_dev),
+		  (phy->type == UNKNOWN) ? "Unknown PHY" : p->name, phy_id);
+}
+
+/**
+ *	sis190_mii_probe - Probe MII PHY for sis190
+ *	@dev: the net device to probe for
+ *
+ *	Search for total of 32 possible mii phy addresses.
+ *	Identify and set current phy if found one,
+ *	return error if it failed to found.
+ */
+static int __devinit sis190_mii_probe(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct mii_if_info *mii_if = &tp->mii_if;
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id;
+	int rc = 0;
+
+	INIT_LIST_HEAD(&tp->first_phy);
+
+	for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+		struct sis190_phy *phy;
+		u16 status;
+
+		status = mdio_read_latched(ioaddr, phy_id, MII_BMSR);
+
+		// Try next mii if the current one is not accessible.
+		if (status == 0xffff || status == 0x0000)
+			continue;
+
+		phy = kmalloc(sizeof(*phy), GFP_KERNEL);
+		if (!phy) {
+			sis190_free_phy(&tp->first_phy);
+			rc = -ENOMEM;
+			goto out;
+		}
+
+		sis190_init_phy(dev, tp, phy, phy_id, status);
+
+		list_add(&tp->first_phy, &phy->list);
+	}
+
+	if (list_empty(&tp->first_phy)) {
+		net_probe(tp, KERN_INFO "%s: No MII transceivers found!\n",
+			  pci_name(tp->pci_dev));
+		rc = -EIO;
+		goto out;
+	}
+
+	/* Select default PHY for mac */
+	sis190_default_phy(dev);
+
+	mii_if->dev = dev;
+	mii_if->mdio_read = __mdio_read;
+	mii_if->mdio_write = __mdio_write;
+	mii_if->phy_id_mask = PHY_ID_ANY;
+	mii_if->reg_num_mask = MII_REG_ANY;
+out:
+	return rc;
+}
+
+static void __devexit sis190_mii_remove(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	sis190_free_phy(&tp->first_phy);
+}
+
+static void sis190_release_board(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct sis190_private *tp = netdev_priv(dev);
+
+	iounmap(tp->mmio_addr);
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	free_netdev(dev);
+}
+
+static struct net_device * __devinit sis190_init_board(struct pci_dev *pdev)
+{
+	struct sis190_private *tp;
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	int rc;
+
+	dev = alloc_etherdev(sizeof(*tp));
+	if (!dev) {
+		net_drv(&debug, KERN_ERR PFX "unable to alloc new ethernet\n");
+		rc = -ENOMEM;
+		goto err_out_0;
+	}
+
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	tp = netdev_priv(dev);
+	tp->msg_enable = netif_msg_init(debug.msg_enable, SIS190_MSG_DEFAULT);
+
+	rc = pci_enable_device(pdev);
+	if (rc < 0) {
+		net_probe(tp, KERN_ERR "%s: enable failure\n", pci_name(pdev));
+		goto err_free_dev_1;
+	}
+
+	rc = -ENODEV;
+
+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+		net_probe(tp, KERN_ERR "%s: region #0 is no MMIO resource.\n",
+			  pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+	if (pci_resource_len(pdev, 0) < SIS190_REGS_SIZE) {
+		net_probe(tp, KERN_ERR "%s: invalid PCI region size(s).\n",
+			  pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+
+	rc = pci_request_regions(pdev, DRV_NAME);
+	if (rc < 0) {
+		net_probe(tp, KERN_ERR PFX "%s: could not request regions.\n",
+			  pci_name(pdev));
+		goto err_pci_disable_2;
+	}
+
+	rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+	if (rc < 0) {
+		net_probe(tp, KERN_ERR "%s: DMA configuration failed.\n",
+			  pci_name(pdev));
+		goto err_free_res_3;
+	}
+
+	pci_set_master(pdev);
+
+	ioaddr = ioremap(pci_resource_start(pdev, 0), SIS190_REGS_SIZE);
+	if (!ioaddr) {
+		net_probe(tp, KERN_ERR "%s: cannot remap MMIO, aborting\n",
+			  pci_name(pdev));
+		rc = -EIO;
+		goto err_free_res_3;
+	}
+
+	tp->pci_dev = pdev;
+	tp->mmio_addr = ioaddr;
+
+	sis190_irq_mask_and_ack(ioaddr);
+
+	sis190_soft_reset(ioaddr);
+out:
+	return dev;
+
+err_free_res_3:
+	pci_release_regions(pdev);
+err_pci_disable_2:
+	pci_disable_device(pdev);
+err_free_dev_1:
+	free_netdev(dev);
+err_out_0:
+	dev = ERR_PTR(rc);
+	goto out;
+}
+
+static void sis190_tx_timeout(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u8 tmp8;
+
+	/* Disable Tx, if not already */
+	tmp8 = SIS_R8(TxControl);
+	if (tmp8 & CmdTxEnb)
+		SIS_W8(TxControl, tmp8 & ~CmdTxEnb);
+
+
+	net_tx_err(tp, KERN_INFO "%s: Transmit timeout, status %08x %08x.\n",
+		   dev->name, SIS_R32(TxControl), SIS_R32(TxSts));
+
+	/* Disable interrupts by clearing the interrupt mask. */
+	SIS_W32(IntrMask, 0x0000);
+
+	/* Stop a shared interrupt from scavenging while we are. */
+	spin_lock_irq(&tp->lock);
+	sis190_tx_clear(tp);
+	spin_unlock_irq(&tp->lock);
+
+	/* ...and finally, reset everything. */
+	sis190_hw_start(dev);
+
+	netif_wake_queue(dev);
+}
+
+static int __devinit sis190_get_mac_addr_from_eeprom(struct pci_dev *pdev,
+						     struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 sig;
+	int i;
+
+	net_probe(tp, KERN_INFO "%s: Read MAC address from EEPROM\n",
+		  pci_name(pdev));
+
+	/* Check to see if there is a sane EEPROM */
+	sig = (u16) sis190_read_eeprom(ioaddr, EEPROMSignature);
+
+	if ((sig == 0xffff) || (sig == 0x0000)) {
+		net_probe(tp, KERN_INFO "%s: Error EEPROM read %x.\n",
+			  pci_name(pdev), sig);
+		return -EIO;
+	}
+
+	/* Get MAC address from EEPROM */
+	for (i = 0; i < MAC_ADDR_LEN / 2; i++) {
+		__le16 w = sis190_read_eeprom(ioaddr, EEPROMMACAddr + i);
+
+		((u16 *)dev->dev_addr)[0] = le16_to_cpu(w);
+	}
+
+	return 0;
+}
+
+/**
+ *	sis190_get_mac_addr_from_apc - Get MAC address for SiS965 model
+ *	@pdev: PCI device
+ *	@dev:  network device to get address for
+ *
+ *	SiS965 model, use APC CMOS RAM to store MAC address.
+ *	APC CMOS RAM is accessed through ISA bridge.
+ *	MAC address is read into @net_dev->dev_addr.
+ */
+static int __devinit sis190_get_mac_addr_from_apc(struct pci_dev *pdev,
+						  struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	struct pci_dev *isa_bridge;
+	u8 reg, tmp8;
+	int i;
+
+	net_probe(tp, KERN_INFO "%s: Read MAC address from APC.\n",
+		  pci_name(pdev));
+
+	isa_bridge = pci_get_device(PCI_VENDOR_ID_SI, 0x0965, NULL);
+	if (!isa_bridge) {
+		net_probe(tp, KERN_INFO "%s: Can not find ISA bridge.\n",
+			  pci_name(pdev));
+		return -EIO;
+	}
+
+	/* Enable port 78h & 79h to access APC Registers. */
+	pci_read_config_byte(isa_bridge, 0x48, &tmp8);
+	reg = (tmp8 & ~0x02);
+	pci_write_config_byte(isa_bridge, 0x48, reg);
+	udelay(50);
+	pci_read_config_byte(isa_bridge, 0x48, &reg);
+
+        for (i = 0; i < MAC_ADDR_LEN; i++) {
+                outb(0x9 + i, 0x78);
+                dev->dev_addr[i] = inb(0x79);
+        }
+
+	outb(0x12, 0x78);
+	reg = inb(0x79);
+
+	/* Restore the value to ISA Bridge */
+	pci_write_config_byte(isa_bridge, 0x48, tmp8);
+	pci_dev_put(isa_bridge);
+
+	return 0;
+}
+
+/**
+ *      sis190_init_rxfilter - Initialize the Rx filter
+ *      @dev: network device to initialize
+ *
+ *      Set receive filter address to our MAC address
+ *      and enable packet filtering.
+ */
+static inline void sis190_init_rxfilter(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	u16 ctl;
+	int i;
+
+	ctl = SIS_R16(RxMacControl);
+	/*
+	 * Disable packet filtering before setting filter.
+	 * Note: SiS's driver writes 32 bits but RxMacControl is 16 bits
+	 * only and followed by RxMacAddr (6 bytes). Strange. -- FR
+	 */
+	SIS_W16(RxMacControl, ctl & ~0x0f00);
+
+	for (i = 0; i < MAC_ADDR_LEN; i++)
+		SIS_W8(RxMacAddr + i, dev->dev_addr[i]);
+
+	SIS_W16(RxMacControl, ctl);
+	SIS_PCI_COMMIT();
+}
+
+static int sis190_get_mac_addr(struct pci_dev *pdev, struct net_device *dev)
+{
+	u8 from;
+
+	pci_read_config_byte(pdev, 0x73, &from);
+
+	return (from & 0x00000001) ?
+		sis190_get_mac_addr_from_apc(pdev, dev) :
+		sis190_get_mac_addr_from_eeprom(pdev, dev);
+}
+
+static void sis190_set_speed_auto(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	void __iomem *ioaddr = tp->mmio_addr;
+	int phy_id = tp->mii_if.phy_id;
+	int val;
+
+	net_link(tp, KERN_INFO "%s: Enabling Auto-negotiation.\n", dev->name);
+
+	val = mdio_read(ioaddr, phy_id, MII_ADVERTISE);
+
+	// Enable 10/100 Full/Half Mode, leave MII_ADVERTISE bit4:0
+	// unchanged.
+	mdio_write(ioaddr, phy_id, MII_ADVERTISE, (val & ADVERTISE_SLCT) |
+		   ADVERTISE_100FULL | ADVERTISE_10FULL |
+		   ADVERTISE_100HALF | ADVERTISE_10HALF);
+
+	// Enable 1000 Full Mode.
+	mdio_write(ioaddr, phy_id, MII_CTRL1000, ADVERTISE_1000FULL);
+
+	// Enable auto-negotiation and restart auto-negotiation.
+	mdio_write(ioaddr, phy_id, MII_BMCR,
+		   BMCR_ANENABLE | BMCR_ANRESTART | BMCR_RESET);
+}
+
+static int sis190_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_ethtool_gset(&tp->mii_if, cmd);
+}
+
+static int sis190_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_ethtool_sset(&tp->mii_if, cmd);
+}
+
+static void sis190_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	strcpy(info->bus_info, pci_name(tp->pci_dev));
+}
+
+static int sis190_get_regs_len(struct net_device *dev)
+{
+	return SIS190_REGS_SIZE;
+}
+
+static void sis190_get_regs(struct net_device *dev, struct ethtool_regs *regs,
+			    void *p)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+	unsigned long flags;
+
+	if (regs->len > SIS190_REGS_SIZE)
+		regs->len = SIS190_REGS_SIZE;
+
+	spin_lock_irqsave(&tp->lock, flags);
+	memcpy_fromio(p, tp->mmio_addr, regs->len);
+	spin_unlock_irqrestore(&tp->lock, flags);
+}
+
+static int sis190_nway_reset(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return mii_nway_restart(&tp->mii_if);
+}
+
+static u32 sis190_get_msglevel(struct net_device *dev)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return tp->msg_enable;
+}
+
+static void sis190_set_msglevel(struct net_device *dev, u32 value)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	tp->msg_enable = value;
+}
+
+static struct ethtool_ops sis190_ethtool_ops = {
+	.get_settings	= sis190_get_settings,
+	.set_settings	= sis190_set_settings,
+	.get_drvinfo	= sis190_get_drvinfo,
+	.get_regs_len	= sis190_get_regs_len,
+	.get_regs	= sis190_get_regs,
+	.get_link	= ethtool_op_get_link,
+	.get_msglevel	= sis190_get_msglevel,
+	.set_msglevel	= sis190_set_msglevel,
+	.nway_reset	= sis190_nway_reset,
+};
+
+static int sis190_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+	struct sis190_private *tp = netdev_priv(dev);
+
+	return !netif_running(dev) ? -EINVAL :
+		generic_mii_ioctl(&tp->mii_if, if_mii(ifr), cmd, NULL);
+}
+
+static int __devinit sis190_init_one(struct pci_dev *pdev,
+				     const struct pci_device_id *ent)
+{
+	static int printed_version = 0;
+	struct sis190_private *tp;
+	struct net_device *dev;
+	void __iomem *ioaddr;
+	int rc;
+
+	if (!printed_version) {
+		net_drv(&debug, KERN_INFO SIS190_DRIVER_NAME " loaded.\n");
+		printed_version = 1;
+	}
+
+	dev = sis190_init_board(pdev);
+	if (IS_ERR(dev)) {
+		rc = PTR_ERR(dev);
+		goto out;
+	}
+
+	tp = netdev_priv(dev);
+	ioaddr = tp->mmio_addr;
+
+	rc = sis190_get_mac_addr(pdev, dev);
+	if (rc < 0)
+		goto err_release_board;
+
+	sis190_init_rxfilter(dev);
+
+	INIT_WORK(&tp->phy_task, sis190_phy_task, dev);
+
+	dev->open = sis190_open;
+	dev->stop = sis190_close;
+	dev->do_ioctl = sis190_ioctl;
+	dev->get_stats = sis190_get_stats;
+	dev->tx_timeout = sis190_tx_timeout;
+	dev->watchdog_timeo = SIS190_TX_TIMEOUT;
+	dev->hard_start_xmit = sis190_start_xmit;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+	dev->poll_controller = sis190_netpoll;
+#endif
+	dev->set_multicast_list = sis190_set_rx_mode;
+	SET_ETHTOOL_OPS(dev, &sis190_ethtool_ops);
+	dev->irq = pdev->irq;
+	dev->base_addr = (unsigned long) 0xdead;
+
+	spin_lock_init(&tp->lock);
+
+	rc = sis190_mii_probe(dev);
+	if (rc < 0)
+		goto err_release_board;
+
+	rc = register_netdev(dev);
+	if (rc < 0)
+		goto err_remove_mii;
+
+	pci_set_drvdata(pdev, dev);
+
+	net_probe(tp, KERN_INFO "%s: %s at %p (IRQ: %d), "
+	       "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x\n",
+	       pci_name(pdev), sis_chip_info[ent->driver_data].name,
+	       ioaddr, dev->irq,
+	       dev->dev_addr[0], dev->dev_addr[1],
+	       dev->dev_addr[2], dev->dev_addr[3],
+	       dev->dev_addr[4], dev->dev_addr[5]);
+
+	netif_carrier_off(dev);
+
+	sis190_set_speed_auto(dev);
+out:
+	return rc;
+
+err_remove_mii:
+	sis190_mii_remove(dev);
+err_release_board:
+	sis190_release_board(pdev);
+	goto out;
+}
+
+static void __devexit sis190_remove_one(struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+
+	sis190_mii_remove(dev);
+	unregister_netdev(dev);
+	sis190_release_board(pdev);
+	pci_set_drvdata(pdev, NULL);
+}
+
+static struct pci_driver sis190_pci_driver = {
+	.name		= DRV_NAME,
+	.id_table	= sis190_pci_tbl,
+	.probe		= sis190_init_one,
+	.remove		= __devexit_p(sis190_remove_one),
+};
+
+static int __init sis190_init_module(void)
+{
+	return pci_module_init(&sis190_pci_driver);
+}
+
+static void __exit sis190_cleanup_module(void)
+{
+	pci_unregister_driver(&sis190_pci_driver);
+}
+
+module_init(sis190_init_module);
+module_exit(sis190_cleanup_module);
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index f15739481d6..d7c98515fdf 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -42,7 +42,7 @@
 #include "skge.h"
 
 #define DRV_NAME		"skge"
-#define DRV_VERSION		"0.8"
+#define DRV_VERSION		"0.9"
 #define PFX			DRV_NAME " "
 
 #define DEFAULT_TX_RING_SIZE	128
@@ -79,8 +79,8 @@ static const struct pci_device_id skge_id_table[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4320) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x5005) }, /* Belkin */
 	{ PCI_DEVICE(PCI_VENDOR_ID_CNET, PCI_DEVICE_ID_CNET_GIGACARD) },
-	{ PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1032) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_LINKSYS, PCI_DEVICE_ID_LINKSYS_EG1064) },
+	{ PCI_VENDOR_ID_LINKSYS, 0x1032, PCI_ANY_ID, 0x0015, },
 	{ 0 }
 };
 MODULE_DEVICE_TABLE(pci, skge_id_table);
@@ -189,7 +189,7 @@ static u32 skge_supported_modes(const struct skge_hw *hw)
 {
 	u32 supported;
 
-	if (iscopper(hw)) {
+	if (hw->copper) {
 		supported = SUPPORTED_10baseT_Half
 			| SUPPORTED_10baseT_Full
 			| SUPPORTED_100baseT_Half
@@ -222,7 +222,7 @@ static int skge_get_settings(struct net_device *dev,
 	ecmd->transceiver = XCVR_INTERNAL;
 	ecmd->supported = skge_supported_modes(hw);
 
-	if (iscopper(hw)) {
+	if (hw->copper) {
 		ecmd->port = PORT_TP;
 		ecmd->phy_address = hw->phy_addr;
 	} else
@@ -876,6 +876,9 @@ static int skge_rx_fill(struct skge_port *skge)
 
 static void skge_link_up(struct skge_port *skge)
 {
+	skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), 
+		    LED_BLK_OFF|LED_SYNC_OFF|LED_ON);
+
 	netif_carrier_on(skge->netdev);
 	if (skge->tx_avail > MAX_SKB_FRAGS + 1)
 		netif_wake_queue(skge->netdev);
@@ -894,6 +897,7 @@ static void skge_link_up(struct skge_port *skge)
 
 static void skge_link_down(struct skge_port *skge)
 {
+	skge_write8(skge->hw, SK_REG(skge->port, LNK_LED_REG), LED_OFF);
 	netif_carrier_off(skge->netdev);
 	netif_stop_queue(skge->netdev);
 
@@ -1599,7 +1603,7 @@ static void yukon_init(struct skge_hw *hw, int port)
 	adv = PHY_AN_CSMA;
 
 	if (skge->autoneg == AUTONEG_ENABLE) {
-		if (iscopper(hw)) {
+		if (hw->copper) {
 			if (skge->advertising & ADVERTISED_1000baseT_Full)
 				ct1000 |= PHY_M_1000C_AFD;
 			if (skge->advertising & ADVERTISED_1000baseT_Half)
@@ -1691,7 +1695,7 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 	/* Set hardware config mode */
 	reg = GPC_INT_POL_HI | GPC_DIS_FC | GPC_DIS_SLEEP |
 		GPC_ENA_XC | GPC_ANEG_ADV_ALL_M | GPC_ENA_PAUSE;
-	reg |= iscopper(hw) ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
+	reg |= hw->copper ? GPC_HWCFG_GMII_COP : GPC_HWCFG_GMII_FIB;
 
 	/* Clear GMC reset */
 	skge_write32(hw, SK_REG(port, GPHY_CTRL), reg | GPC_RST_SET);
@@ -1780,7 +1784,12 @@ static void yukon_mac_init(struct skge_hw *hw, int port)
 		reg &= ~GMF_RX_F_FL_ON;
 	skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_CLR);
 	skge_write16(hw, SK_REG(port, RX_GMF_CTRL_T), reg);
-	skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF);
+	/*
+	 * because Pause Packet Truncation in GMAC is not working
+	 * we have to increase the Flush Threshold to 64 bytes
+	 * in order to flush pause packets in Rx FIFO on Yukon-1
+	 */
+	skge_write16(hw, SK_REG(port, RX_GMF_FL_THR), RX_GMF_FL_THR_DEF+1);
 
 	/* Configure Tx MAC FIFO */
 	skge_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
@@ -2670,18 +2679,6 @@ static void skge_error_irq(struct skge_hw *hw)
 		/* Timestamp (unused) overflow */
 		if (hwstatus & IS_IRQ_TIST_OV)
 			skge_write8(hw, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
-
-		if (hwstatus & IS_IRQ_SENSOR) {
-			/* no sensors on 32-bit Yukon */
-			if (!(skge_read16(hw, B0_CTST) & CS_BUS_SLOT_SZ)) {
-				printk(KERN_ERR PFX "ignoring bogus sensor interrups\n");
-				skge_write32(hw, B0_HWE_IMSK,
-					     IS_ERR_MSK & ~IS_IRQ_SENSOR);
-			} else
-				printk(KERN_WARNING PFX "sensor interrupt\n");
-		}
-
-
 	}
 
 	if (hwstatus & IS_RAM_RD_PAR) {
@@ -2712,9 +2709,10 @@ static void skge_error_irq(struct skge_hw *hw)
 
 		skge_pci_clear(hw);
 
+		/* if error still set then just ignore it */
 		hwstatus = skge_read32(hw, B0_HWE_ISRC);
 		if (hwstatus & IS_IRQ_STAT) {
-			printk(KERN_WARNING PFX "IRQ status %x: still set ignoring hardware errors\n",
+			pr_debug("IRQ status %x: still set ignoring hardware errors\n",
 			       hwstatus);
 			hw->intr_mask &= ~IS_HW_ERR;
 		}
@@ -2876,7 +2874,7 @@ static const char *skge_board_name(const struct skge_hw *hw)
 static int skge_reset(struct skge_hw *hw)
 {
 	u16 ctst;
-	u8 t8, mac_cfg;
+	u8 t8, mac_cfg, pmd_type, phy_type;
 	int i;
 
 	ctst = skge_read16(hw, B0_CTST);
@@ -2895,18 +2893,19 @@ static int skge_reset(struct skge_hw *hw)
 		     ctst & (CS_CLK_RUN_HOT|CS_CLK_RUN_RST|CS_CLK_RUN_ENA));
 
 	hw->chip_id = skge_read8(hw, B2_CHIP_ID);
-	hw->phy_type = skge_read8(hw, B2_E_1) & 0xf;
-	hw->pmd_type = skge_read8(hw, B2_PMD_TYP);
+	phy_type = skge_read8(hw, B2_E_1) & 0xf;
+	pmd_type = skge_read8(hw, B2_PMD_TYP);
+	hw->copper = (pmd_type == 'T' || pmd_type == '1');
 
 	switch (hw->chip_id) {
 	case CHIP_ID_GENESIS:
-		switch (hw->phy_type) {
+		switch (phy_type) {
 		case SK_PHY_BCOM:
 			hw->phy_addr = PHY_ADDR_BCOM;
 			break;
 		default:
 			printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
-			       pci_name(hw->pdev), hw->phy_type);
+			       pci_name(hw->pdev), phy_type);
 			return -EOPNOTSUPP;
 		}
 		break;
@@ -2914,13 +2913,10 @@ static int skge_reset(struct skge_hw *hw)
 	case CHIP_ID_YUKON:
 	case CHIP_ID_YUKON_LITE:
 	case CHIP_ID_YUKON_LP:
-		if (hw->phy_type < SK_PHY_MARV_COPPER && hw->pmd_type != 'S')
-			hw->phy_type = SK_PHY_MARV_COPPER;
+		if (phy_type < SK_PHY_MARV_COPPER && pmd_type != 'S')
+			hw->copper = 1;
 
 		hw->phy_addr = PHY_ADDR_MARV;
-		if (!iscopper(hw))
-			hw->phy_type = SK_PHY_MARV_FIBER;
-
 		break;
 
 	default:
@@ -2948,12 +2944,20 @@ static int skge_reset(struct skge_hw *hw)
 	else
 		hw->ram_size = t8 * 4096;
 
+	hw->intr_mask = IS_HW_ERR | IS_EXT_REG;
 	if (hw->chip_id == CHIP_ID_GENESIS)
 		genesis_init(hw);
 	else {
 		/* switch power to VCC (WA for VAUX problem) */
 		skge_write8(hw, B0_POWER_CTRL,
 			    PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
+		/* avoid boards with stuck Hardware error bits */
+		if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
+		    (skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
+			printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
+			hw->intr_mask &= ~IS_HW_ERR;
+		}
+
 		for (i = 0; i < hw->ports; i++) {
 			skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
 			skge_write16(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_CLR);
@@ -2994,7 +2998,6 @@ static int skge_reset(struct skge_hw *hw)
 	skge_write32(hw, B2_IRQM_INI, skge_usecs2clk(hw, 100));
 	skge_write32(hw, B2_IRQM_CTRL, TIM_START);
 
-	hw->intr_mask = IS_HW_ERR | IS_EXT_REG;
 	skge_write32(hw, B0_IMSK, hw->intr_mask);
 
 	if (hw->chip_id != CHIP_ID_GENESIS)
diff --git a/drivers/net/skge.h b/drivers/net/skge.h
index b432f1bb816..f1680beb8e6 100644
--- a/drivers/net/skge.h
+++ b/drivers/net/skge.h
@@ -214,8 +214,6 @@ enum {
 
 /*	B2_IRQM_HWE_MSK	32 bit	IRQ Moderation HW Error Mask */
 enum {
-	IS_ERR_MSK	= 0x00003fff,/* 		All Error bits */
-
 	IS_IRQ_TIST_OV	= 1<<13, /* Time Stamp Timer Overflow (YUKON only) */
 	IS_IRQ_SENSOR	= 1<<12, /* IRQ from Sensor (YUKON only) */
 	IS_IRQ_MST_ERR	= 1<<11, /* IRQ master error detected */
@@ -230,6 +228,12 @@ enum {
 	IS_M2_PAR_ERR	= 1<<2,	/* MAC 2 Parity Error */
 	IS_R1_PAR_ERR	= 1<<1,	/* Queue R1 Parity Error */
 	IS_R2_PAR_ERR	= 1<<0,	/* Queue R2 Parity Error */
+
+	IS_ERR_MSK	= IS_IRQ_MST_ERR | IS_IRQ_STAT
+			| IS_NO_STAT_M1 | IS_NO_STAT_M2
+			| IS_RAM_RD_PAR | IS_RAM_WR_PAR
+			| IS_M1_PAR_ERR | IS_M2_PAR_ERR
+			| IS_R1_PAR_ERR | IS_R2_PAR_ERR,
 };
 
 /*	B2_TST_CTRL1	 8 bit	Test Control Register 1 */
@@ -2456,24 +2460,17 @@ struct skge_hw {
 
 	u8	     	     chip_id;
 	u8		     chip_rev;
-	u8		     phy_type;
-	u8		     pmd_type;
-	u16		     phy_addr;
+	u8		     copper;
 	u8		     ports;
 
 	u32	     	     ram_size;
 	u32	     	     ram_offset;
+	u16		     phy_addr;
 
 	struct tasklet_struct ext_tasklet;
 	spinlock_t	     phy_lock;
 };
 
-
-static inline int iscopper(const struct skge_hw *hw)
-{
-	return (hw->pmd_type == 'T');
-}
-
 enum {
 	FLOW_MODE_NONE 		= 0, /* No Flow-Control */
 	FLOW_MODE_LOC_SEND	= 1, /* Local station sends PAUSE */
diff --git a/drivers/net/smc-ultra.c b/drivers/net/smc-ultra.c
index 6d9dae60a69..ba8593ac3f8 100644
--- a/drivers/net/smc-ultra.c
+++ b/drivers/net/smc-ultra.c
@@ -68,6 +68,7 @@ static const char version[] =
 #include <linux/etherdevice.h>
 
 #include <asm/io.h>
+#include <asm/irq.h>
 #include <asm/system.h>
 
 #include "8390.h"
diff --git a/drivers/net/sonic.c b/drivers/net/sonic.c
index cdc9cc873e0..90b818a8de6 100644
--- a/drivers/net/sonic.c
+++ b/drivers/net/sonic.c
@@ -1,6 +1,11 @@
 /*
  * sonic.c
  *
+ * (C) 2005 Finn Thain
+ *
+ * Converted to DMA API, added zero-copy buffer handling, and
+ * (from the mac68k project) introduced dhd's support for 16-bit cards.
+ *
  * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de)
  * 
  * This driver is based on work from Andreas Busse, but most of
@@ -9,12 +14,23 @@
  * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
  *
  *    Core code included by system sonic drivers
+ *
+ * And... partially rewritten again by David Huggins-Daines in order
+ * to cope with screwed up Macintosh NICs that may or may not use
+ * 16-bit DMA.
+ *
+ * (C) 1999 David Huggins-Daines <dhd@debian.org>
+ *
  */
 
 /*
  * Sources: Olivetti M700-10 Risc Personal Computer hardware handbook,
  * National Semiconductors data sheet for the DP83932B Sonic Ethernet
  * controller, and the files "8390.c" and "skeleton.c" in this directory.
+ *
+ * Additional sources: Nat Semi data sheet for the DP83932C and Nat Semi
+ * Application Note AN-746, the files "lance.c" and "ibmlana.c". See also
+ * the NetBSD file "sys/arch/mac68k/dev/if_sn.c".
  */
 
 
@@ -28,6 +44,9 @@
  */
 static int sonic_open(struct net_device *dev)
 {
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+	
 	if (sonic_debug > 2)
 		printk("sonic_open: initializing sonic driver.\n");
 
@@ -40,14 +59,59 @@ static int sonic_open(struct net_device *dev)
  * This means that during execution of the handler interrupt are disabled
  * covering another bug otherwise corrupting data.  This doesn't mean
  * this glue works ok under all situations.
+ *
+ * Note (dhd): this also appears to prevent lockups on the Macintrash
+ * when more than one Ethernet card is installed (knock on wood)
+ *
+ * Note (fthain): whether the above is still true is anyones guess. Certainly
+ * the buffer handling algorithms will not tolerate re-entrance without some
+ * mutual exclusion added. Anyway, the memcpy has now been eliminated from the
+ * rx code to make this a faster "fast interrupt".
  */
-//    if (sonic_request_irq(dev->irq, &sonic_interrupt, 0, "sonic", dev)) {
-	if (sonic_request_irq(dev->irq, &sonic_interrupt, SA_INTERRUPT,
-	                      "sonic", dev)) {
-		printk("\n%s: unable to get IRQ %d .\n", dev->name, dev->irq);
+	if (request_irq(dev->irq, &sonic_interrupt, SONIC_IRQ_FLAG, "sonic", dev)) {
+		printk(KERN_ERR "\n%s: unable to get IRQ %d .\n", dev->name, dev->irq);
 		return -EAGAIN;
 	}
 
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		struct sk_buff *skb = dev_alloc_skb(SONIC_RBSIZE + 2);
+		if (skb == NULL) {
+			while(i > 0) { /* free any that were allocated successfully */
+				i--;
+				dev_kfree_skb(lp->rx_skb[i]);
+				lp->rx_skb[i] = NULL;
+			}
+			printk(KERN_ERR "%s: couldn't allocate receive buffers\n",
+			       dev->name);
+			return -ENOMEM;
+		}
+		skb->dev = dev;
+		/* align IP header unless DMA requires otherwise */
+		if (SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+			skb_reserve(skb, 2);
+		lp->rx_skb[i] = skb;
+	}
+
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		dma_addr_t laddr = dma_map_single(lp->device, skb_put(lp->rx_skb[i], SONIC_RBSIZE),
+		                                  SONIC_RBSIZE, DMA_FROM_DEVICE);
+		if (!laddr) {
+			while(i > 0) { /* free any that were mapped successfully */
+				i--;
+				dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+				lp->rx_laddr[i] = (dma_addr_t)0;
+			}
+			for (i = 0; i < SONIC_NUM_RRS; i++) {
+				dev_kfree_skb(lp->rx_skb[i]);
+				lp->rx_skb[i] = NULL;
+			}
+			printk(KERN_ERR "%s: couldn't map rx DMA buffers\n",
+			       dev->name);
+			return -ENOMEM;
+		}
+		lp->rx_laddr[i] = laddr;
+	}
+
 	/*
 	 * Initialize the SONIC
 	 */
@@ -67,7 +131,8 @@ static int sonic_open(struct net_device *dev)
  */
 static int sonic_close(struct net_device *dev)
 {
-	unsigned int base_addr = dev->base_addr;
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
 
 	if (sonic_debug > 2)
 		printk("sonic_close\n");
@@ -77,20 +142,56 @@ static int sonic_close(struct net_device *dev)
 	/*
 	 * stop the SONIC, disable interrupts
 	 */
-	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
 
-	sonic_free_irq(dev->irq, dev);	/* release the IRQ */
+	/* unmap and free skbs that haven't been transmitted */
+	for (i = 0; i < SONIC_NUM_TDS; i++) {
+		if(lp->tx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+			lp->tx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->tx_skb[i]) {
+			dev_kfree_skb(lp->tx_skb[i]);
+			lp->tx_skb[i] = NULL;
+		}
+	}
+
+	/* unmap and free the receive buffers */
+	for (i = 0; i < SONIC_NUM_RRS; i++) {
+		if(lp->rx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->rx_laddr[i], SONIC_RBSIZE, DMA_FROM_DEVICE);
+			lp->rx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->rx_skb[i]) {
+			dev_kfree_skb(lp->rx_skb[i]);
+			lp->rx_skb[i] = NULL;
+		}
+	}
+
+	free_irq(dev->irq, dev);	/* release the IRQ */
 
 	return 0;
 }
 
 static void sonic_tx_timeout(struct net_device *dev)
 {
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	printk("%s: transmit timed out.\n", dev->name);
-
+	struct sonic_local *lp = netdev_priv(dev);
+	int i;
+	/* Stop the interrupts for this */
+	SONIC_WRITE(SONIC_IMR, 0);
+	/* We could resend the original skbs. Easier to re-initialise. */
+	for (i = 0; i < SONIC_NUM_TDS; i++) {
+		if(lp->tx_laddr[i]) {
+			dma_unmap_single(lp->device, lp->tx_laddr[i], lp->tx_len[i], DMA_TO_DEVICE);
+			lp->tx_laddr[i] = (dma_addr_t)0;
+		}
+		if(lp->tx_skb[i]) {
+			dev_kfree_skb(lp->tx_skb[i]);
+			lp->tx_skb[i] = NULL;
+		}
+	}
 	/* Try to restart the adaptor. */
 	sonic_init(dev);
 	lp->stats.tx_errors++;
@@ -100,60 +201,92 @@ static void sonic_tx_timeout(struct net_device *dev)
 
 /*
  * transmit packet
+ *
+ * Appends new TD during transmission thus avoiding any TX interrupts
+ * until we run out of TDs.
+ * This routine interacts closely with the ISR in that it may,
+ *   set tx_skb[i]
+ *   reset the status flags of the new TD
+ *   set and reset EOL flags
+ *   stop the tx queue
+ * The ISR interacts with this routine in various ways. It may,
+ *   reset tx_skb[i]
+ *   test the EOL and status flags of the TDs
+ *   wake the tx queue
+ * Concurrently with all of this, the SONIC is potentially writing to
+ * the status flags of the TDs.
+ * Until some mutual exclusion is added, this code will not work with SMP. However,
+ * MIPS Jazz machines and m68k Macs were all uni-processor machines.
  */
+
 static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 {
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	unsigned int base_addr = dev->base_addr;
-	unsigned int laddr;
-	int entry, length;
-
-	netif_stop_queue(dev);
+	struct sonic_local *lp = netdev_priv(dev);
+	dma_addr_t laddr;
+	int length;
+	int entry = lp->next_tx;
 
 	if (sonic_debug > 2)
 		printk("sonic_send_packet: skb=%p, dev=%p\n", skb, dev);
 
+	length = skb->len;
+	if (length < ETH_ZLEN) {
+		skb = skb_padto(skb, ETH_ZLEN);
+		if (skb == NULL)
+			return 0;
+		length = ETH_ZLEN;
+	}
+
 	/*
 	 * Map the packet data into the logical DMA address space
 	 */
-	if ((laddr = vdma_alloc(CPHYSADDR(skb->data), skb->len)) == ~0UL) {
-		printk("%s: no VDMA entry for transmit available.\n",
-		       dev->name);
+
+	laddr = dma_map_single(lp->device, skb->data, length, DMA_TO_DEVICE);
+	if (!laddr) {
+		printk(KERN_ERR "%s: failed to map tx DMA buffer.\n", dev->name);
 		dev_kfree_skb(skb);
-		netif_start_queue(dev);
 		return 1;
 	}
-	entry = lp->cur_tx & SONIC_TDS_MASK;
+   
+	sonic_tda_put(dev, entry, SONIC_TD_STATUS, 0);       /* clear status */
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_COUNT, 1);   /* single fragment */
+	sonic_tda_put(dev, entry, SONIC_TD_PKTSIZE, length); /* length of packet */
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_L, laddr & 0xffff);
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_PTR_H, laddr >> 16);
+	sonic_tda_put(dev, entry, SONIC_TD_FRAG_SIZE, length);
+	sonic_tda_put(dev, entry, SONIC_TD_LINK,
+		sonic_tda_get(dev, entry, SONIC_TD_LINK) | SONIC_EOL);
+
+	/*
+	 * Must set tx_skb[entry] only after clearing status, and
+	 * before clearing EOL and before stopping queue
+	 */
+	wmb();
+	lp->tx_len[entry] = length;
 	lp->tx_laddr[entry] = laddr;
 	lp->tx_skb[entry] = skb;
 
-	length = (skb->len < ETH_ZLEN) ? ETH_ZLEN : skb->len;
-	flush_cache_all();
+	wmb();
+	sonic_tda_put(dev, lp->eol_tx, SONIC_TD_LINK,
+				  sonic_tda_get(dev, lp->eol_tx, SONIC_TD_LINK) & ~SONIC_EOL);
+	lp->eol_tx = entry;
 
-	/*
-	 * Setup the transmit descriptor and issue the transmit command.
-	 */
-	lp->tda[entry].tx_status = 0;	/* clear status */
-	lp->tda[entry].tx_frag_count = 1;	/* single fragment */
-	lp->tda[entry].tx_pktsize = length;	/* length of packet */
-	lp->tda[entry].tx_frag_ptr_l = laddr & 0xffff;
-	lp->tda[entry].tx_frag_ptr_h = laddr >> 16;
-	lp->tda[entry].tx_frag_size = length;
-	lp->cur_tx++;
-	lp->stats.tx_bytes += length;
+	lp->next_tx = (entry + 1) & SONIC_TDS_MASK;
+	if (lp->tx_skb[lp->next_tx] != NULL) {
+		/* The ring is full, the ISR has yet to process the next TD. */
+		if (sonic_debug > 3)
+			printk("%s: stopping queue\n", dev->name);
+		netif_stop_queue(dev);
+		/* after this packet, wait for ISR to free up some TDAs */
+	} else netif_start_queue(dev);
 
 	if (sonic_debug > 2)
-		printk("sonic_send_packet: issueing Tx command\n");
+		printk("sonic_send_packet: issuing Tx command\n");
 
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
 
 	dev->trans_start = jiffies;
 
-	if (lp->cur_tx < lp->dirty_tx + SONIC_NUM_TDS)
-		netif_start_queue(dev);
-	else
-		lp->tx_full = 1;
-
 	return 0;
 }
 
@@ -164,175 +297,199 @@ static int sonic_send_packet(struct sk_buff *skb, struct net_device *dev)
 static irqreturn_t sonic_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 {
 	struct net_device *dev = (struct net_device *) dev_id;
-	unsigned int base_addr = dev->base_addr;
-	struct sonic_local *lp;
+	struct sonic_local *lp = netdev_priv(dev);
 	int status;
 
 	if (dev == NULL) {
-		printk("sonic_interrupt: irq %d for unknown device.\n", irq);
+		printk(KERN_ERR "sonic_interrupt: irq %d for unknown device.\n", irq);
 		return IRQ_NONE;
 	}
 
-	lp = (struct sonic_local *) dev->priv;
-
-	status = SONIC_READ(SONIC_ISR);
-	SONIC_WRITE(SONIC_ISR, 0x7fff);	/* clear all bits */
-
-	if (sonic_debug > 2)
-		printk("sonic_interrupt: ISR=%x\n", status);
-
-	if (status & SONIC_INT_PKTRX) {
-		sonic_rx(dev);	/* got packet(s) */
-	}
-
-	if (status & SONIC_INT_TXDN) {
-		int dirty_tx = lp->dirty_tx;
-
-		while (dirty_tx < lp->cur_tx) {
-			int entry = dirty_tx & SONIC_TDS_MASK;
-			int status = lp->tda[entry].tx_status;
+	if (!(status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT))
+		return IRQ_NONE;
 
-			if (sonic_debug > 3)
-				printk
-				    ("sonic_interrupt: status %d, cur_tx %d, dirty_tx %d\n",
-				     status, lp->cur_tx, lp->dirty_tx);
+	do {
+		if (status & SONIC_INT_PKTRX) {
+			if (sonic_debug > 2)
+				printk("%s: packet rx\n", dev->name);
+			sonic_rx(dev);	/* got packet(s) */
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_PKTRX); /* clear the interrupt */
+		}
 
-			if (status == 0) {
-				/* It still hasn't been Txed, kick the sonic again */
-				SONIC_WRITE(SONIC_CMD, SONIC_CR_TXP);
-				break;
-			}
+		if (status & SONIC_INT_TXDN) {
+			int entry = lp->cur_tx;
+			int td_status;
+			int freed_some = 0;
 
-			/* put back EOL and free descriptor */
-			lp->tda[entry].tx_frag_count = 0;
-			lp->tda[entry].tx_status = 0;
-
-			if (status & 0x0001)
-				lp->stats.tx_packets++;
-			else {
-				lp->stats.tx_errors++;
-				if (status & 0x0642)
-					lp->stats.tx_aborted_errors++;
-				if (status & 0x0180)
-					lp->stats.tx_carrier_errors++;
-				if (status & 0x0020)
-					lp->stats.tx_window_errors++;
-				if (status & 0x0004)
-					lp->stats.tx_fifo_errors++;
-			}
+			/* At this point, cur_tx is the index of a TD that is one of:
+			 *   unallocated/freed                          (status set   & tx_skb[entry] clear)
+			 *   allocated and sent                         (status set   & tx_skb[entry] set  )
+			 *   allocated and not yet sent                 (status clear & tx_skb[entry] set  )
+			 *   still being allocated by sonic_send_packet (status clear & tx_skb[entry] clear)
+			 */
 
-			/* We must free the original skb */
-			if (lp->tx_skb[entry]) {
+			if (sonic_debug > 2)
+				printk("%s: tx done\n", dev->name);
+
+			while (lp->tx_skb[entry] != NULL) {
+				if ((td_status = sonic_tda_get(dev, entry, SONIC_TD_STATUS)) == 0)
+					break;
+
+				if (td_status & 0x0001) {
+					lp->stats.tx_packets++;
+					lp->stats.tx_bytes += sonic_tda_get(dev, entry, SONIC_TD_PKTSIZE);
+				} else {
+					lp->stats.tx_errors++;
+					if (td_status & 0x0642)
+						lp->stats.tx_aborted_errors++;
+					if (td_status & 0x0180)
+						lp->stats.tx_carrier_errors++;
+					if (td_status & 0x0020)
+						lp->stats.tx_window_errors++;
+					if (td_status & 0x0004)
+						lp->stats.tx_fifo_errors++;
+				}
+
+				/* We must free the original skb */
 				dev_kfree_skb_irq(lp->tx_skb[entry]);
-				lp->tx_skb[entry] = 0;
+				lp->tx_skb[entry] = NULL;
+				/* and unmap DMA buffer */
+				dma_unmap_single(lp->device, lp->tx_laddr[entry], lp->tx_len[entry], DMA_TO_DEVICE);
+				lp->tx_laddr[entry] = (dma_addr_t)0;
+				freed_some = 1;
+
+				if (sonic_tda_get(dev, entry, SONIC_TD_LINK) & SONIC_EOL) {
+					entry = (entry + 1) & SONIC_TDS_MASK;
+					break;
+				}
+				entry = (entry + 1) & SONIC_TDS_MASK;
 			}
-			/* and the VDMA address */
-			vdma_free(lp->tx_laddr[entry]);
-			dirty_tx++;
-		}
 
-		if (lp->tx_full
-		    && dirty_tx + SONIC_NUM_TDS > lp->cur_tx + 2) {
-			/* The ring is no longer full, clear tbusy. */
-			lp->tx_full = 0;
-			netif_wake_queue(dev);
+			if (freed_some || lp->tx_skb[entry] == NULL)
+				netif_wake_queue(dev);  /* The ring is no longer full */
+			lp->cur_tx = entry;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_TXDN); /* clear the interrupt */
 		}
 
-		lp->dirty_tx = dirty_tx;
-	}
+		/*
+		 * check error conditions
+		 */
+		if (status & SONIC_INT_RFO) {
+			if (sonic_debug > 1)
+				printk("%s: rx fifo overrun\n", dev->name);
+			lp->stats.rx_fifo_errors++;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_RFO); /* clear the interrupt */
+		}
+		if (status & SONIC_INT_RDE) {
+			if (sonic_debug > 1)
+				printk("%s: rx descriptors exhausted\n", dev->name);
+			lp->stats.rx_dropped++;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_RDE); /* clear the interrupt */
+		}
+		if (status & SONIC_INT_RBAE) {
+			if (sonic_debug > 1)
+				printk("%s: rx buffer area exceeded\n", dev->name);
+			lp->stats.rx_dropped++;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_RBAE); /* clear the interrupt */
+		}
 
-	/*
-	 * check error conditions
-	 */
-	if (status & SONIC_INT_RFO) {
-		printk("%s: receive fifo underrun\n", dev->name);
-		lp->stats.rx_fifo_errors++;
-	}
-	if (status & SONIC_INT_RDE) {
-		printk("%s: receive descriptors exhausted\n", dev->name);
-		lp->stats.rx_dropped++;
-	}
-	if (status & SONIC_INT_RBE) {
-		printk("%s: receive buffer exhausted\n", dev->name);
-		lp->stats.rx_dropped++;
-	}
-	if (status & SONIC_INT_RBAE) {
-		printk("%s: receive buffer area exhausted\n", dev->name);
-		lp->stats.rx_dropped++;
-	}
+		/* counter overruns; all counters are 16bit wide */
+		if (status & SONIC_INT_FAE) {
+			lp->stats.rx_frame_errors += 65536;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_FAE); /* clear the interrupt */
+		}
+		if (status & SONIC_INT_CRC) {
+			lp->stats.rx_crc_errors += 65536;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_CRC); /* clear the interrupt */
+		}
+		if (status & SONIC_INT_MP) {
+			lp->stats.rx_missed_errors += 65536;
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_MP); /* clear the interrupt */
+		}
 
-	/* counter overruns; all counters are 16bit wide */
-	if (status & SONIC_INT_FAE)
-		lp->stats.rx_frame_errors += 65536;
-	if (status & SONIC_INT_CRC)
-		lp->stats.rx_crc_errors += 65536;
-	if (status & SONIC_INT_MP)
-		lp->stats.rx_missed_errors += 65536;
+		/* transmit error */
+		if (status & SONIC_INT_TXER) {
+			if ((SONIC_READ(SONIC_TCR) & SONIC_TCR_FU) && (sonic_debug > 2))
+				printk(KERN_ERR "%s: tx fifo underrun\n", dev->name);
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_TXER); /* clear the interrupt */
+		}
 
-	/* transmit error */
-	if (status & SONIC_INT_TXER)
-		lp->stats.tx_errors++;
+		/* bus retry */
+		if (status & SONIC_INT_BR) {
+			printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n",
+				dev->name);
+			/* ... to help debug DMA problems causing endless interrupts. */
+			/* Bounce the eth interface to turn on the interrupt again. */
+			SONIC_WRITE(SONIC_IMR, 0);
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_BR); /* clear the interrupt */
+		}
 
-	/*
-	 * clear interrupt bits and return
-	 */
-	SONIC_WRITE(SONIC_ISR, status);
+		/* load CAM done */
+		if (status & SONIC_INT_LCD)
+			SONIC_WRITE(SONIC_ISR, SONIC_INT_LCD); /* clear the interrupt */
+	} while((status = SONIC_READ(SONIC_ISR) & SONIC_IMR_DEFAULT));
 	return IRQ_HANDLED;
 }
 
 /*
- * We have a good packet(s), get it/them out of the buffers.
+ * We have a good packet(s), pass it/them up the network stack.
  */
 static void sonic_rx(struct net_device *dev)
 {
-	unsigned int base_addr = dev->base_addr;
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	sonic_rd_t *rd = &lp->rda[lp->cur_rx & SONIC_RDS_MASK];
+	struct sonic_local *lp = netdev_priv(dev);
 	int status;
-
-	while (rd->in_use == 0) {
-		struct sk_buff *skb;
+	int entry = lp->cur_rx;
+
+	while (sonic_rda_get(dev, entry, SONIC_RD_IN_USE) == 0) {
+		struct sk_buff *used_skb;
+		struct sk_buff *new_skb;
+		dma_addr_t new_laddr;
+		u16 bufadr_l;
+		u16 bufadr_h;
 		int pkt_len;
-		unsigned char *pkt_ptr;
 
-		status = rd->rx_status;
-		if (sonic_debug > 3)
-			printk("status %x, cur_rx %d, cur_rra %x\n",
-			       status, lp->cur_rx, lp->cur_rra);
+		status = sonic_rda_get(dev, entry, SONIC_RD_STATUS);
 		if (status & SONIC_RCR_PRX) {
-			pkt_len = rd->rx_pktlen;
-			pkt_ptr =
-			    (char *)
-			    sonic_chiptomem((rd->rx_pktptr_h << 16) +
-					    rd->rx_pktptr_l);
-
-			if (sonic_debug > 3)
-				printk
-				    ("pktptr %p (rba %p) h:%x l:%x, bsize h:%x l:%x\n",
-				     pkt_ptr, lp->rba, rd->rx_pktptr_h,
-				     rd->rx_pktptr_l,
-				     SONIC_READ(SONIC_RBWC1),
-				     SONIC_READ(SONIC_RBWC0));
-
 			/* Malloc up new buffer. */
-			skb = dev_alloc_skb(pkt_len + 2);
-			if (skb == NULL) {
-				printk
-				    ("%s: Memory squeeze, dropping packet.\n",
-				     dev->name);
+			new_skb = dev_alloc_skb(SONIC_RBSIZE + 2);
+			if (new_skb == NULL) {
+				printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name);
+				lp->stats.rx_dropped++;
+				break;
+			}
+			new_skb->dev = dev;
+			/* provide 16 byte IP header alignment unless DMA requires otherwise */
+			if(SONIC_BUS_SCALE(lp->dma_bitmode) == 2)
+				skb_reserve(new_skb, 2); 
+
+			new_laddr = dma_map_single(lp->device, skb_put(new_skb, SONIC_RBSIZE),
+		                               SONIC_RBSIZE, DMA_FROM_DEVICE);
+			if (!new_laddr) {
+				dev_kfree_skb(new_skb);
+				printk(KERN_ERR "%s: Failed to map rx buffer, dropping packet.\n", dev->name);
 				lp->stats.rx_dropped++;
 				break;
 			}
-			skb->dev = dev;
-			skb_reserve(skb, 2);	/* 16 byte align */
-			skb_put(skb, pkt_len);	/* Make room */
-			eth_copy_and_sum(skb, pkt_ptr, pkt_len, 0);
-			skb->protocol = eth_type_trans(skb, dev);
-			netif_rx(skb);	/* pass the packet to upper layers */
+
+			/* now we have a new skb to replace it, pass the used one up the stack */
+			dma_unmap_single(lp->device, lp->rx_laddr[entry], SONIC_RBSIZE, DMA_FROM_DEVICE);
+			used_skb = lp->rx_skb[entry];
+			pkt_len = sonic_rda_get(dev, entry, SONIC_RD_PKTLEN);
+			skb_trim(used_skb, pkt_len);
+			used_skb->protocol = eth_type_trans(used_skb, dev);
+			netif_rx(used_skb);
 			dev->last_rx = jiffies;
 			lp->stats.rx_packets++;
 			lp->stats.rx_bytes += pkt_len;
 
+			/* and insert the new skb */
+			lp->rx_laddr[entry] = new_laddr;
+			lp->rx_skb[entry] = new_skb;
+
+			bufadr_l = (unsigned long)new_laddr & 0xffff;
+			bufadr_h = (unsigned long)new_laddr >> 16;
+			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_L, bufadr_l);
+			sonic_rra_put(dev, entry, SONIC_RR_BUFADR_H, bufadr_h);
 		} else {
 			/* This should only happen, if we enable accepting broken packets. */
 			lp->stats.rx_errors++;
@@ -341,29 +498,35 @@ static void sonic_rx(struct net_device *dev)
 			if (status & SONIC_RCR_CRCR)
 				lp->stats.rx_crc_errors++;
 		}
-
-		rd->in_use = 1;
-		rd = &lp->rda[(++lp->cur_rx) & SONIC_RDS_MASK];
-		/* now give back the buffer to the receive buffer area */
 		if (status & SONIC_RCR_LPKT) {
 			/*
-			 * this was the last packet out of the current receice buffer
+			 * this was the last packet out of the current receive buffer
 			 * give the buffer back to the SONIC
 			 */
-			lp->cur_rra += sizeof(sonic_rr_t);
-			if (lp->cur_rra >
-			    (lp->rra_laddr +
-			     (SONIC_NUM_RRS -
-			      1) * sizeof(sonic_rr_t))) lp->cur_rra =
-				    lp->rra_laddr;
-			SONIC_WRITE(SONIC_RWP, lp->cur_rra & 0xffff);
+			lp->cur_rwp += SIZEOF_SONIC_RR * SONIC_BUS_SCALE(lp->dma_bitmode);
+			if (lp->cur_rwp >= lp->rra_end) lp->cur_rwp = lp->rra_laddr & 0xffff;
+			SONIC_WRITE(SONIC_RWP, lp->cur_rwp);
+			if (SONIC_READ(SONIC_ISR) & SONIC_INT_RBE) {
+				if (sonic_debug > 2)
+					printk("%s: rx buffer exhausted\n", dev->name);
+				SONIC_WRITE(SONIC_ISR, SONIC_INT_RBE); /* clear the flag */
+			}
 		} else
-			printk
-			    ("%s: rx desc without RCR_LPKT. Shouldn't happen !?\n",
+			printk(KERN_ERR "%s: rx desc without RCR_LPKT. Shouldn't happen !?\n",
 			     dev->name);
+		/*
+		 * give back the descriptor
+		 */
+		sonic_rda_put(dev, entry, SONIC_RD_LINK,
+			sonic_rda_get(dev, entry, SONIC_RD_LINK) | SONIC_EOL);
+		sonic_rda_put(dev, entry, SONIC_RD_IN_USE, 1);
+		sonic_rda_put(dev, lp->eol_rx, SONIC_RD_LINK,
+			sonic_rda_get(dev, lp->eol_rx, SONIC_RD_LINK) & ~SONIC_EOL);
+		lp->eol_rx = entry;
+		lp->cur_rx = entry = (entry + 1) & SONIC_RDS_MASK;
 	}
 	/*
-	 * If any worth-while packets have been received, dev_rint()
+	 * If any worth-while packets have been received, netif_rx()
 	 * has done a mark_bh(NET_BH) for us and will work on them
 	 * when we get to the bottom-half routine.
 	 */
@@ -376,8 +539,7 @@ static void sonic_rx(struct net_device *dev)
  */
 static struct net_device_stats *sonic_get_stats(struct net_device *dev)
 {
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	unsigned int base_addr = dev->base_addr;
+	struct sonic_local *lp = netdev_priv(dev);
 
 	/* read the tally counter from the SONIC and reset them */
 	lp->stats.rx_crc_errors += SONIC_READ(SONIC_CRCT);
@@ -396,8 +558,7 @@ static struct net_device_stats *sonic_get_stats(struct net_device *dev)
  */
 static void sonic_multicast_list(struct net_device *dev)
 {
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	unsigned int base_addr = dev->base_addr;
+	struct sonic_local *lp = netdev_priv(dev);
 	unsigned int rcr;
 	struct dev_mc_list *dmi = dev->mc_list;
 	unsigned char *addr;
@@ -413,20 +574,15 @@ static void sonic_multicast_list(struct net_device *dev)
 			rcr |= SONIC_RCR_AMC;
 		} else {
 			if (sonic_debug > 2)
-				printk
-				    ("sonic_multicast_list: mc_count %d\n",
-				     dev->mc_count);
-			lp->cda.cam_enable = 1;	/* always enable our own address */
+				printk("sonic_multicast_list: mc_count %d\n", dev->mc_count);
+			sonic_set_cam_enable(dev, 1);  /* always enable our own address */
 			for (i = 1; i <= dev->mc_count; i++) {
 				addr = dmi->dmi_addr;
 				dmi = dmi->next;
-				lp->cda.cam_desc[i].cam_cap0 =
-				    addr[1] << 8 | addr[0];
-				lp->cda.cam_desc[i].cam_cap1 =
-				    addr[3] << 8 | addr[2];
-				lp->cda.cam_desc[i].cam_cap2 =
-				    addr[5] << 8 | addr[4];
-				lp->cda.cam_enable |= (1 << i);
+				sonic_cda_put(dev, i, SONIC_CD_CAP0, addr[1] << 8 | addr[0]);
+				sonic_cda_put(dev, i, SONIC_CD_CAP1, addr[3] << 8 | addr[2]);
+				sonic_cda_put(dev, i, SONIC_CD_CAP2, addr[5] << 8 | addr[4]);
+				sonic_set_cam_enable(dev, sonic_get_cam_enable(dev) | (1 << i));
 			}
 			SONIC_WRITE(SONIC_CDC, 16);
 			/* issue Load CAM command */
@@ -447,19 +603,16 @@ static void sonic_multicast_list(struct net_device *dev)
  */
 static int sonic_init(struct net_device *dev)
 {
-	unsigned int base_addr = dev->base_addr;
 	unsigned int cmd;
-	struct sonic_local *lp = (struct sonic_local *) dev->priv;
-	unsigned int rra_start;
-	unsigned int rra_end;
+	struct sonic_local *lp = netdev_priv(dev);
 	int i;
 
 	/*
 	 * put the Sonic into software-reset mode and
 	 * disable all interrupts
 	 */
-	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_IMR, 0);
+	SONIC_WRITE(SONIC_ISR, 0x7fff);
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RST);
 
 	/*
@@ -475,34 +628,32 @@ static int sonic_init(struct net_device *dev)
 	if (sonic_debug > 2)
 		printk("sonic_init: initialize receive resource area\n");
 
-	rra_start = lp->rra_laddr & 0xffff;
-	rra_end =
-	    (rra_start + (SONIC_NUM_RRS * sizeof(sonic_rr_t))) & 0xffff;
-
 	for (i = 0; i < SONIC_NUM_RRS; i++) {
-		lp->rra[i].rx_bufadr_l =
-		    (lp->rba_laddr + i * SONIC_RBSIZE) & 0xffff;
-		lp->rra[i].rx_bufadr_h =
-		    (lp->rba_laddr + i * SONIC_RBSIZE) >> 16;
-		lp->rra[i].rx_bufsize_l = SONIC_RBSIZE >> 1;
-		lp->rra[i].rx_bufsize_h = 0;
+		u16 bufadr_l = (unsigned long)lp->rx_laddr[i] & 0xffff;
+		u16 bufadr_h = (unsigned long)lp->rx_laddr[i] >> 16;
+		sonic_rra_put(dev, i, SONIC_RR_BUFADR_L, bufadr_l);
+		sonic_rra_put(dev, i, SONIC_RR_BUFADR_H, bufadr_h);
+		sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_L, SONIC_RBSIZE >> 1);
+		sonic_rra_put(dev, i, SONIC_RR_BUFSIZE_H, 0);
 	}
 
 	/* initialize all RRA registers */
-	SONIC_WRITE(SONIC_RSA, rra_start);
-	SONIC_WRITE(SONIC_REA, rra_end);
-	SONIC_WRITE(SONIC_RRP, rra_start);
-	SONIC_WRITE(SONIC_RWP, rra_end);
+	lp->rra_end = (lp->rra_laddr + SONIC_NUM_RRS * SIZEOF_SONIC_RR *
+					SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff;
+	lp->cur_rwp = (lp->rra_laddr + (SONIC_NUM_RRS - 1) * SIZEOF_SONIC_RR *
+					SONIC_BUS_SCALE(lp->dma_bitmode)) & 0xffff;
+  
+	SONIC_WRITE(SONIC_RSA, lp->rra_laddr & 0xffff);
+	SONIC_WRITE(SONIC_REA, lp->rra_end);
+	SONIC_WRITE(SONIC_RRP, lp->rra_laddr & 0xffff);
+	SONIC_WRITE(SONIC_RWP, lp->cur_rwp);
 	SONIC_WRITE(SONIC_URRA, lp->rra_laddr >> 16);
-	SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE - 2) >> 1);
-
-	lp->cur_rra =
-	    lp->rra_laddr + (SONIC_NUM_RRS - 1) * sizeof(sonic_rr_t);
+	SONIC_WRITE(SONIC_EOBC, (SONIC_RBSIZE >> 1) - (lp->dma_bitmode ? 2 : 1));
 
 	/* load the resource pointers */
 	if (sonic_debug > 3)
-		printk("sonic_init: issueing RRRA command\n");
-
+		printk("sonic_init: issuing RRRA command\n");
+  
 	SONIC_WRITE(SONIC_CMD, SONIC_CR_RRRA);
 	i = 0;
 	while (i++ < 100) {
@@ -511,27 +662,30 @@ static int sonic_init(struct net_device *dev)
 	}
 
 	if (sonic_debug > 2)
-		printk("sonic_init: status=%x\n", SONIC_READ(SONIC_CMD));
-
+		printk("sonic_init: status=%x i=%d\n", SONIC_READ(SONIC_CMD), i);
+    
 	/*
 	 * Initialize the receive descriptors so that they
 	 * become a circular linked list, ie. let the last
 	 * descriptor point to the first again.
 	 */
 	if (sonic_debug > 2)
-		printk("sonic_init: initialize receive descriptors\n");
-	for (i = 0; i < SONIC_NUM_RDS; i++) {
-		lp->rda[i].rx_status = 0;
-		lp->rda[i].rx_pktlen = 0;
-		lp->rda[i].rx_pktptr_l = 0;
-		lp->rda[i].rx_pktptr_h = 0;
-		lp->rda[i].rx_seqno = 0;
-		lp->rda[i].in_use = 1;
-		lp->rda[i].link =
-		    lp->rda_laddr + (i + 1) * sizeof(sonic_rd_t);
+		printk("sonic_init: initialize receive descriptors\n");      
+	for (i=0; i<SONIC_NUM_RDS; i++) {
+		sonic_rda_put(dev, i, SONIC_RD_STATUS, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTLEN, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTPTR_L, 0);
+		sonic_rda_put(dev, i, SONIC_RD_PKTPTR_H, 0);
+		sonic_rda_put(dev, i, SONIC_RD_SEQNO, 0);
+		sonic_rda_put(dev, i, SONIC_RD_IN_USE, 1);
+		sonic_rda_put(dev, i, SONIC_RD_LINK,
+			lp->rda_laddr +
+			((i+1) * SIZEOF_SONIC_RD * SONIC_BUS_SCALE(lp->dma_bitmode)));
 	}
 	/* fix last descriptor */
-	lp->rda[SONIC_NUM_RDS - 1].link = lp->rda_laddr;
+	sonic_rda_put(dev, SONIC_NUM_RDS - 1, SONIC_RD_LINK,
+		(lp->rda_laddr & 0xffff) | SONIC_EOL);
+	lp->eol_rx = SONIC_NUM_RDS - 1;
 	lp->cur_rx = 0;
 	SONIC_WRITE(SONIC_URDA, lp->rda_laddr >> 16);
 	SONIC_WRITE(SONIC_CRDA, lp->rda_laddr & 0xffff);
@@ -542,34 +696,34 @@ static int sonic_init(struct net_device *dev)
 	if (sonic_debug > 2)
 		printk("sonic_init: initialize transmit descriptors\n");
 	for (i = 0; i < SONIC_NUM_TDS; i++) {
-		lp->tda[i].tx_status = 0;
-		lp->tda[i].tx_config = 0;
-		lp->tda[i].tx_pktsize = 0;
-		lp->tda[i].tx_frag_count = 0;
-		lp->tda[i].link =
-		    (lp->tda_laddr +
-		     (i + 1) * sizeof(sonic_td_t)) | SONIC_END_OF_LINKS;
+		sonic_tda_put(dev, i, SONIC_TD_STATUS, 0);
+		sonic_tda_put(dev, i, SONIC_TD_CONFIG, 0);
+		sonic_tda_put(dev, i, SONIC_TD_PKTSIZE, 0);
+		sonic_tda_put(dev, i, SONIC_TD_FRAG_COUNT, 0);
+		sonic_tda_put(dev, i, SONIC_TD_LINK,
+			(lp->tda_laddr & 0xffff) +
+			(i + 1) * SIZEOF_SONIC_TD * SONIC_BUS_SCALE(lp->dma_bitmode));
+		lp->tx_skb[i] = NULL;
 	}
-	lp->tda[SONIC_NUM_TDS - 1].link =
-	    (lp->tda_laddr & 0xffff) | SONIC_END_OF_LINKS;
+	/* fix last descriptor */
+	sonic_tda_put(dev, SONIC_NUM_TDS - 1, SONIC_TD_LINK,
+		(lp->tda_laddr & 0xffff));
 
 	SONIC_WRITE(SONIC_UTDA, lp->tda_laddr >> 16);
 	SONIC_WRITE(SONIC_CTDA, lp->tda_laddr & 0xffff);
-	lp->cur_tx = lp->dirty_tx = 0;
-
+	lp->cur_tx = lp->next_tx = 0;
+	lp->eol_tx = SONIC_NUM_TDS - 1;
+    
 	/*
 	 * put our own address to CAM desc[0]
 	 */
-	lp->cda.cam_desc[0].cam_cap0 =
-	    dev->dev_addr[1] << 8 | dev->dev_addr[0];
-	lp->cda.cam_desc[0].cam_cap1 =
-	    dev->dev_addr[3] << 8 | dev->dev_addr[2];
-	lp->cda.cam_desc[0].cam_cap2 =
-	    dev->dev_addr[5] << 8 | dev->dev_addr[4];
-	lp->cda.cam_enable = 1;
+	sonic_cda_put(dev, 0, SONIC_CD_CAP0, dev->dev_addr[1] << 8 | dev->dev_addr[0]);
+	sonic_cda_put(dev, 0, SONIC_CD_CAP1, dev->dev_addr[3] << 8 | dev->dev_addr[2]);
+	sonic_cda_put(dev, 0, SONIC_CD_CAP2, dev->dev_addr[5] << 8 | dev->dev_addr[4]);
+	sonic_set_cam_enable(dev, 1);
 
 	for (i = 0; i < 16; i++)
-		lp->cda.cam_desc[i].cam_entry_pointer = i;
+		sonic_cda_put(dev, i, SONIC_CD_ENTRY_POINTER, i);
 
 	/*
 	 * initialize CAM registers
@@ -588,8 +742,8 @@ static int sonic_init(struct net_device *dev)
 			break;
 	}
 	if (sonic_debug > 2) {
-		printk("sonic_init: CMD=%x, ISR=%x\n",
-		       SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR));
+		printk("sonic_init: CMD=%x, ISR=%x\n, i=%d",
+		       SONIC_READ(SONIC_CMD), SONIC_READ(SONIC_ISR), i);
 	}
 
 	/*
@@ -604,7 +758,7 @@ static int sonic_init(struct net_device *dev)
 
 	cmd = SONIC_READ(SONIC_CMD);
 	if ((cmd & SONIC_CR_RXEN) == 0 || (cmd & SONIC_CR_STP) == 0)
-		printk("sonic_init: failed, status=%x\n", cmd);
+		printk(KERN_ERR "sonic_init: failed, status=%x\n", cmd);
 
 	if (sonic_debug > 2)
 		printk("sonic_init: new status=%x\n",
diff --git a/drivers/net/sonic.h b/drivers/net/sonic.h
index c4a6d58e4af..cede969a8ba 100644
--- a/drivers/net/sonic.h
+++ b/drivers/net/sonic.h
@@ -1,5 +1,5 @@
 /*
- * Helpfile for sonic.c
+ * Header file for sonic.c
  *
  * (C) Waldorf Electronics, Germany
  * Written by Andreas Busse
@@ -9,10 +9,16 @@
  * and pad structure members must be exchanged. Also, the structures
  * need to be changed accordingly to the bus size. 
  *
- * 981229 MSch:	did just that for the 68k Mac port (32 bit, big endian),
- *		see CONFIG_MACSONIC branch below.
+ * 981229 MSch:	did just that for the 68k Mac port (32 bit, big endian)
  *
+ * 990611 David Huggins-Daines <dhd@debian.org>: This machine abstraction
+ * does not cope with 16-bit bus sizes very well.  Therefore I have
+ * rewritten it with ugly macros and evil inlines.
+ *
+ * 050625 Finn Thain: introduced more 32-bit cards and dhd's support
+ *        for 16-bit cards (from the mac68k project).
  */
+
 #ifndef SONIC_H
 #define SONIC_H
 
@@ -83,6 +89,7 @@
 /*
  * Error counters
  */
+
 #define SONIC_CRCT              0x2c
 #define SONIC_FAET              0x2d
 #define SONIC_MPT               0x2e
@@ -182,14 +189,14 @@
 
 #define SONIC_INT_BR		0x4000
 #define SONIC_INT_HBL		0x2000
-#define SONIC_INT_LCD           0x1000
-#define SONIC_INT_PINT          0x0800
-#define SONIC_INT_PKTRX         0x0400
-#define SONIC_INT_TXDN          0x0200
-#define SONIC_INT_TXER          0x0100
-#define SONIC_INT_TC            0x0080
-#define SONIC_INT_RDE           0x0040
-#define SONIC_INT_RBE           0x0020
+#define SONIC_INT_LCD		0x1000
+#define SONIC_INT_PINT		0x0800
+#define SONIC_INT_PKTRX		0x0400
+#define SONIC_INT_TXDN		0x0200
+#define SONIC_INT_TXER		0x0100
+#define SONIC_INT_TC		0x0080
+#define SONIC_INT_RDE		0x0040
+#define SONIC_INT_RBE		0x0020
 #define SONIC_INT_RBAE		0x0010
 #define SONIC_INT_CRC		0x0008
 #define SONIC_INT_FAE		0x0004
@@ -201,224 +208,61 @@
  * The interrupts we allow.
  */
 
-#define SONIC_IMR_DEFAULT	(SONIC_INT_BR | \
-				SONIC_INT_LCD | \
-                                SONIC_INT_PINT | \
+#define SONIC_IMR_DEFAULT     ( SONIC_INT_BR | \
+                                SONIC_INT_LCD | \
+                                SONIC_INT_RFO | \
                                 SONIC_INT_PKTRX | \
                                 SONIC_INT_TXDN | \
                                 SONIC_INT_TXER | \
                                 SONIC_INT_RDE | \
-                                SONIC_INT_RBE | \
                                 SONIC_INT_RBAE | \
                                 SONIC_INT_CRC | \
                                 SONIC_INT_FAE | \
                                 SONIC_INT_MP)
 
 
-#define	SONIC_END_OF_LINKS	0x0001
-
-
-#ifdef CONFIG_MACSONIC
-/*
- * Big endian like structures on 680x0 Macs
- */
-
-typedef struct {
-	u32 rx_bufadr_l;	/* receive buffer ptr */
-	u32 rx_bufadr_h;
-
-	u32 rx_bufsize_l;	/* no. of words in the receive buffer */
-	u32 rx_bufsize_h;
-} sonic_rr_t;
-
-/*
- * Sonic receive descriptor. Receive descriptors are
- * kept in a linked list of these structures.
- */
-
-typedef struct {
-	SREGS_PAD(pad0);
-	u16 rx_status;		/* status after reception of a packet */
-	 SREGS_PAD(pad1);
-	u16 rx_pktlen;		/* length of the packet incl. CRC */
-
-	/*
-	 * Pointers to the location in the receive buffer area (RBA)
-	 * where the packet resides. A packet is always received into
-	 * a contiguous piece of memory.
-	 */
-	 SREGS_PAD(pad2);
-	u16 rx_pktptr_l;
-	 SREGS_PAD(pad3);
-	u16 rx_pktptr_h;
-
-	 SREGS_PAD(pad4);
-	u16 rx_seqno;		/* sequence no. */
-
-	 SREGS_PAD(pad5);
-	u16 link;		/* link to next RDD (end if EOL bit set) */
-
-	/*
-	 * Owner of this descriptor, 0= driver, 1=sonic
-	 */
-
-	 SREGS_PAD(pad6);
-	u16 in_use;
-
-	caddr_t rda_next;	/* pointer to next RD */
-} sonic_rd_t;
-
-
-/*
- * Describes a Transmit Descriptor
- */
-typedef struct {
-	SREGS_PAD(pad0);
-	u16 tx_status;		/* status after transmission of a packet */
-	 SREGS_PAD(pad1);
-	u16 tx_config;		/* transmit configuration for this packet */
-	 SREGS_PAD(pad2);
-	u16 tx_pktsize;		/* size of the packet to be transmitted */
-	 SREGS_PAD(pad3);
-	u16 tx_frag_count;	/* no. of fragments */
-
-	 SREGS_PAD(pad4);
-	u16 tx_frag_ptr_l;
-	 SREGS_PAD(pad5);
-	u16 tx_frag_ptr_h;
-	 SREGS_PAD(pad6);
-	u16 tx_frag_size;
-
-	 SREGS_PAD(pad7);
-	u16 link;		/* ptr to next descriptor */
-} sonic_td_t;
-
-
-/*
- * Describes an entry in the CAM Descriptor Area.
- */
-
-typedef struct {
-	SREGS_PAD(pad0);
-	u16 cam_entry_pointer;
-	 SREGS_PAD(pad1);
-	u16 cam_cap0;
-	 SREGS_PAD(pad2);
-	u16 cam_cap1;
-	 SREGS_PAD(pad3);
-	u16 cam_cap2;
-} sonic_cd_t;
-
+#define SONIC_EOL       0x0001
 #define CAM_DESCRIPTORS 16
 
-
-typedef struct {
-	sonic_cd_t cam_desc[CAM_DESCRIPTORS];
-	 SREGS_PAD(pad);
-	u16 cam_enable;
-} sonic_cda_t;
-
-#else				/* original declarations, little endian 32 bit */
-
-/*
- * structure definitions
- */
-
-typedef struct {
-	u32 rx_bufadr_l;	/* receive buffer ptr */
-	u32 rx_bufadr_h;
-
-	u32 rx_bufsize_l;	/* no. of words in the receive buffer */
-	u32 rx_bufsize_h;
-} sonic_rr_t;
-
-/*
- * Sonic receive descriptor. Receive descriptors are
- * kept in a linked list of these structures.
- */
-
-typedef struct {
-	u16 rx_status;		/* status after reception of a packet */
-	 SREGS_PAD(pad0);
-	u16 rx_pktlen;		/* length of the packet incl. CRC */
-	 SREGS_PAD(pad1);
-
-	/*
-	 * Pointers to the location in the receive buffer area (RBA)
-	 * where the packet resides. A packet is always received into
-	 * a contiguous piece of memory.
-	 */
-	u16 rx_pktptr_l;
-	 SREGS_PAD(pad2);
-	u16 rx_pktptr_h;
-	 SREGS_PAD(pad3);
-
-	u16 rx_seqno;		/* sequence no. */
-	 SREGS_PAD(pad4);
-
-	u16 link;		/* link to next RDD (end if EOL bit set) */
-	 SREGS_PAD(pad5);
-
-	/*
-	 * Owner of this descriptor, 0= driver, 1=sonic
-	 */
-
-	u16 in_use;
-	 SREGS_PAD(pad6);
-
-	caddr_t rda_next;	/* pointer to next RD */
-} sonic_rd_t;
-
-
-/*
- * Describes a Transmit Descriptor
- */
-typedef struct {
-	u16 tx_status;		/* status after transmission of a packet */
-	 SREGS_PAD(pad0);
-	u16 tx_config;		/* transmit configuration for this packet */
-	 SREGS_PAD(pad1);
-	u16 tx_pktsize;		/* size of the packet to be transmitted */
-	 SREGS_PAD(pad2);
-	u16 tx_frag_count;	/* no. of fragments */
-	 SREGS_PAD(pad3);
-
-	u16 tx_frag_ptr_l;
-	 SREGS_PAD(pad4);
-	u16 tx_frag_ptr_h;
-	 SREGS_PAD(pad5);
-	u16 tx_frag_size;
-	 SREGS_PAD(pad6);
-
-	u16 link;		/* ptr to next descriptor */
-	 SREGS_PAD(pad7);
-} sonic_td_t;
-
-
-/*
- * Describes an entry in the CAM Descriptor Area.
- */
-
-typedef struct {
-	u16 cam_entry_pointer;
-	 SREGS_PAD(pad0);
-	u16 cam_cap0;
-	 SREGS_PAD(pad1);
-	u16 cam_cap1;
-	 SREGS_PAD(pad2);
-	u16 cam_cap2;
-	 SREGS_PAD(pad3);
-} sonic_cd_t;
-
-#define CAM_DESCRIPTORS 16
-
-
-typedef struct {
-	sonic_cd_t cam_desc[CAM_DESCRIPTORS];
-	u16 cam_enable;
-	 SREGS_PAD(pad);
-} sonic_cda_t;
-#endif				/* endianness */
+/* Offsets in the various DMA buffers accessed by the SONIC */
+
+#define SONIC_BITMODE16 0
+#define SONIC_BITMODE32 1
+#define SONIC_BUS_SCALE(bitmode) ((bitmode) ? 4 : 2)
+/* Note!  These are all measured in bus-size units, so use SONIC_BUS_SCALE */
+#define SIZEOF_SONIC_RR 4
+#define SONIC_RR_BUFADR_L  0
+#define SONIC_RR_BUFADR_H  1
+#define SONIC_RR_BUFSIZE_L 2
+#define SONIC_RR_BUFSIZE_H 3
+
+#define SIZEOF_SONIC_RD 7
+#define SONIC_RD_STATUS   0
+#define SONIC_RD_PKTLEN   1
+#define SONIC_RD_PKTPTR_L 2
+#define SONIC_RD_PKTPTR_H 3
+#define SONIC_RD_SEQNO    4
+#define SONIC_RD_LINK     5
+#define SONIC_RD_IN_USE   6
+
+#define SIZEOF_SONIC_TD 8
+#define SONIC_TD_STATUS       0
+#define SONIC_TD_CONFIG       1
+#define SONIC_TD_PKTSIZE      2
+#define SONIC_TD_FRAG_COUNT   3
+#define SONIC_TD_FRAG_PTR_L   4
+#define SONIC_TD_FRAG_PTR_H   5
+#define SONIC_TD_FRAG_SIZE    6
+#define SONIC_TD_LINK         7
+
+#define SIZEOF_SONIC_CD 4
+#define SONIC_CD_ENTRY_POINTER 0
+#define SONIC_CD_CAP0          1
+#define SONIC_CD_CAP1          2
+#define SONIC_CD_CAP2          3
+
+#define SIZEOF_SONIC_CDA ((CAM_DESCRIPTORS * SIZEOF_SONIC_CD) + 1)
+#define SONIC_CDA_CAM_ENABLE   (CAM_DESCRIPTORS * SIZEOF_SONIC_CD)
 
 /*
  * Some tunables for the buffer areas. Power of 2 is required
@@ -426,44 +270,60 @@ typedef struct {
  *
  * MSch: use more buffer space for the slow m68k Macs!
  */
-#ifdef CONFIG_MACSONIC
-#define SONIC_NUM_RRS    32	/* number of receive resources */
-#define SONIC_NUM_RDS    SONIC_NUM_RRS	/* number of receive descriptors */
-#define SONIC_NUM_TDS    32	/* number of transmit descriptors */
-#else
-#define SONIC_NUM_RRS    16	/* number of receive resources */
-#define SONIC_NUM_RDS    SONIC_NUM_RRS	/* number of receive descriptors */
-#define SONIC_NUM_TDS    16	/* number of transmit descriptors */
-#endif
-#define SONIC_RBSIZE   1520	/* size of one resource buffer */
+#define SONIC_NUM_RRS   16            /* number of receive resources */
+#define SONIC_NUM_RDS   SONIC_NUM_RRS /* number of receive descriptors */
+#define SONIC_NUM_TDS   16            /* number of transmit descriptors */
 
-#define SONIC_RDS_MASK   (SONIC_NUM_RDS-1)
-#define SONIC_TDS_MASK   (SONIC_NUM_TDS-1)
+#define SONIC_RDS_MASK  (SONIC_NUM_RDS-1)
+#define SONIC_TDS_MASK  (SONIC_NUM_TDS-1)
 
+#define SONIC_RBSIZE	1520          /* size of one resource buffer */
+
+/* Again, measured in bus size units! */
+#define SIZEOF_SONIC_DESC (SIZEOF_SONIC_CDA	\
+	+ (SIZEOF_SONIC_TD * SONIC_NUM_TDS)	\
+	+ (SIZEOF_SONIC_RD * SONIC_NUM_RDS)	\
+	+ (SIZEOF_SONIC_RR * SONIC_NUM_RRS))
 
 /* Information that need to be kept for each board. */
 struct sonic_local {
-	sonic_cda_t cda;	/* virtual CPU address of CDA */
-	sonic_td_t tda[SONIC_NUM_TDS];	/* transmit descriptor area */
-	sonic_rr_t rra[SONIC_NUM_RRS];	/* receive resource area */
-	sonic_rd_t rda[SONIC_NUM_RDS];	/* receive descriptor area */
-	struct sk_buff *tx_skb[SONIC_NUM_TDS];	/* skbuffs for packets to transmit */
-	unsigned int tx_laddr[SONIC_NUM_TDS];	/* logical DMA address fro skbuffs */
-	unsigned char *rba;	/* start of receive buffer areas */
-	unsigned int cda_laddr;	/* logical DMA address of CDA */
-	unsigned int tda_laddr;	/* logical DMA address of TDA */
-	unsigned int rra_laddr;	/* logical DMA address of RRA */
-	unsigned int rda_laddr;	/* logical DMA address of RDA */
-	unsigned int rba_laddr;	/* logical DMA address of RBA */
-	unsigned int cur_rra;	/* current indexes to resource areas */
+	/* Bus size.  0 == 16 bits, 1 == 32 bits. */
+	int dma_bitmode;
+	/* Register offset within the longword (independent of endianness,
+	   and varies from one type of Macintosh SONIC to another
+	   (Aarrgh)) */
+	int reg_offset;
+	void *descriptors;
+	/* Crud.  These areas have to be within the same 64K.  Therefore
+       we allocate a desriptors page, and point these to places within it. */
+	void *cda;  /* CAM descriptor area */
+	void *tda;  /* Transmit descriptor area */
+	void *rra;  /* Receive resource area */
+	void *rda;  /* Receive descriptor area */
+	struct sk_buff* volatile rx_skb[SONIC_NUM_RRS];	/* packets to be received */
+	struct sk_buff* volatile tx_skb[SONIC_NUM_TDS];	/* packets to be transmitted */
+	unsigned int tx_len[SONIC_NUM_TDS]; /* lengths of tx DMA mappings */
+	/* Logical DMA addresses on MIPS, bus addresses on m68k
+	 * (so "laddr" is a bit misleading) */
+	dma_addr_t descriptors_laddr;
+	u32 cda_laddr;              /* logical DMA address of CDA */
+	u32 tda_laddr;              /* logical DMA address of TDA */
+	u32 rra_laddr;              /* logical DMA address of RRA */
+	u32 rda_laddr;              /* logical DMA address of RDA */
+	dma_addr_t rx_laddr[SONIC_NUM_RRS]; /* logical DMA addresses of rx skbuffs */
+	dma_addr_t tx_laddr[SONIC_NUM_TDS]; /* logical DMA addresses of tx skbuffs */
+	unsigned int rra_end;
+	unsigned int cur_rwp;
 	unsigned int cur_rx;
-	unsigned int cur_tx;
-	unsigned int dirty_tx;	/* last unacked transmit packet */
-	char tx_full;
+	unsigned int cur_tx;           /* first unacked transmit packet */
+	unsigned int eol_rx;
+	unsigned int eol_tx;           /* last unacked transmit packet */
+	unsigned int next_tx;          /* next free TD */
+	struct device *device;         /* generic device */
 	struct net_device_stats stats;
 };
 
-#define TX_TIMEOUT 6
+#define TX_TIMEOUT (3 * HZ)
 
 /* Index to functions, as function prototypes. */
 
@@ -477,6 +337,114 @@ static void sonic_multicast_list(struct net_device *dev);
 static int sonic_init(struct net_device *dev);
 static void sonic_tx_timeout(struct net_device *dev);
 
+/* Internal inlines for reading/writing DMA buffers.  Note that bus
+   size and endianness matter here, whereas they don't for registers,
+   as far as we can tell. */
+/* OpenBSD calls this "SWO".  I'd like to think that sonic_buf_put()
+   is a much better name. */
+static inline void sonic_buf_put(void* base, int bitmode,
+				 int offset, __u16 val)
+{
+	if (bitmode)
+#ifdef __BIG_ENDIAN
+		((__u16 *) base + (offset*2))[1] = val;
+#else
+		((__u16 *) base + (offset*2))[0] = val;
+#endif
+	else
+	 	((__u16 *) base)[offset] = val;
+}
+
+static inline __u16 sonic_buf_get(void* base, int bitmode,
+				  int offset)
+{
+	if (bitmode)
+#ifdef __BIG_ENDIAN
+		return ((volatile __u16 *) base + (offset*2))[1];
+#else
+		return ((volatile __u16 *) base + (offset*2))[0];
+#endif
+	else
+		return ((volatile __u16 *) base)[offset];
+}
+
+/* Inlines that you should actually use for reading/writing DMA buffers */
+static inline void sonic_cda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	sonic_buf_put(lp->cda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_CD) + offset, val);
+}
+
+static inline __u16 sonic_cda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	return sonic_buf_get(lp->cda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_CD) + offset);
+}
+
+static inline void sonic_set_cam_enable(struct net_device* dev, __u16 val)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	sonic_buf_put(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE, val);
+}
+
+static inline __u16 sonic_get_cam_enable(struct net_device* dev)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	return sonic_buf_get(lp->cda, lp->dma_bitmode, SONIC_CDA_CAM_ENABLE);
+}
+
+static inline void sonic_tda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	sonic_buf_put(lp->tda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_TD) + offset, val);
+}
+
+static inline __u16 sonic_tda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	return sonic_buf_get(lp->tda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_TD) + offset);
+}
+
+static inline void sonic_rda_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	sonic_buf_put(lp->rda, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_RD) + offset, val);
+}
+
+static inline __u16 sonic_rda_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	return sonic_buf_get(lp->rda, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_RD) + offset);
+}
+
+static inline void sonic_rra_put(struct net_device* dev, int entry,
+				 int offset, __u16 val)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	sonic_buf_put(lp->rra, lp->dma_bitmode,
+		      (entry * SIZEOF_SONIC_RR) + offset, val);
+}
+
+static inline __u16 sonic_rra_get(struct net_device* dev, int entry,
+				  int offset)
+{
+	struct sonic_local* lp = (struct sonic_local *) dev->priv;
+	return sonic_buf_get(lp->rra, lp->dma_bitmode,
+			     (entry * SIZEOF_SONIC_RR) + offset);
+}
+
 static const char *version =
     "sonic.c:v0.92 20.9.98 tsbogend@alpha.franken.de\n";
 
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 01419aff333..af8263a1580 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -66,8 +66,8 @@
 
 #define DRV_MODULE_NAME		"tg3"
 #define PFX DRV_MODULE_NAME	": "
-#define DRV_MODULE_VERSION	"3.36"
-#define DRV_MODULE_RELDATE	"August 19, 2005"
+#define DRV_MODULE_VERSION	"3.37"
+#define DRV_MODULE_RELDATE	"August 25, 2005"
 
 #define TG3_DEF_MAC_MODE	0
 #define TG3_DEF_RX_MODE		0
@@ -340,41 +340,92 @@ static struct {
 
 static void tg3_write_indirect_reg32(struct tg3 *tp, u32 off, u32 val)
 {
-	if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
-		spin_lock_bh(&tp->indirect_lock);
-		pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
-		pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
-		spin_unlock_bh(&tp->indirect_lock);
-	} else {
-		writel(val, tp->regs + off);
-		if ((tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) != 0)
-			readl(tp->regs + off);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
+}
+
+static void tg3_write_flush_reg32(struct tg3 *tp, u32 off, u32 val)
+{
+	writel(val, tp->regs + off);
+	readl(tp->regs + off);
+}
+
+static u32 tg3_read_indirect_reg32(struct tg3 *tp, u32 off)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
+	pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
+	return val;
+}
+
+static void tg3_write_indirect_mbox(struct tg3 *tp, u32 off, u32 val)
+{
+	unsigned long flags;
+
+	if (off == (MAILBOX_RCVRET_CON_IDX_0 + TG3_64BIT_REG_LOW)) {
+		pci_write_config_dword(tp->pdev, TG3PCI_RCV_RET_RING_CON_IDX +
+				       TG3_64BIT_REG_LOW, val);
+		return;
+	}
+	if (off == (MAILBOX_RCV_STD_PROD_IDX + TG3_64BIT_REG_LOW)) {
+		pci_write_config_dword(tp->pdev, TG3PCI_STD_RING_PROD_IDX +
+				       TG3_64BIT_REG_LOW, val);
+		return;
+	}
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
+
+	/* In indirect mode when disabling interrupts, we also need
+	 * to clear the interrupt bit in the GRC local ctrl register.
+	 */
+	if ((off == (MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW)) &&
+	    (val == 0x1)) {
+		pci_write_config_dword(tp->pdev, TG3PCI_MISC_LOCAL_CTRL,
+				       tp->grc_local_ctrl|GRC_LCLCTRL_CLEARINT);
 	}
 }
 
+static u32 tg3_read_indirect_mbox(struct tg3 *tp, u32 off)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
+	pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off + 0x5600);
+	pci_read_config_dword(tp->pdev, TG3PCI_REG_DATA, &val);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
+	return val;
+}
+
 static void _tw32_flush(struct tg3 *tp, u32 off, u32 val)
 {
-	if ((tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) != 0) {
-		spin_lock_bh(&tp->indirect_lock);
-		pci_write_config_dword(tp->pdev, TG3PCI_REG_BASE_ADDR, off);
-		pci_write_config_dword(tp->pdev, TG3PCI_REG_DATA, val);
-		spin_unlock_bh(&tp->indirect_lock);
-	} else {
-		void __iomem *dest = tp->regs + off;
-		writel(val, dest);
-		readl(dest);    /* always flush PCI write */
-	}
+	tp->write32(tp, off, val);
+	if (!(tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG) &&
+	    !(tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG) &&
+	    !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+		tp->read32(tp, off);	/* flush */
 }
 
-static inline void _tw32_rx_mbox(struct tg3 *tp, u32 off, u32 val)
+static inline void tw32_mailbox_flush(struct tg3 *tp, u32 off, u32 val)
 {
-	void __iomem *mbox = tp->regs + off;
-	writel(val, mbox);
-	if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
-		readl(mbox);
+	tp->write32_mbox(tp, off, val);
+	if (!(tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER) &&
+	    !(tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND))
+		tp->read32_mbox(tp, off);
 }
 
-static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
+static void tg3_write32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
 {
 	void __iomem *mbox = tp->regs + off;
 	writel(val, mbox);
@@ -384,46 +435,57 @@ static inline void _tw32_tx_mbox(struct tg3 *tp, u32 off, u32 val)
 		readl(mbox);
 }
 
-#define tw32_mailbox(reg, val)  writel(((val) & 0xffffffff), tp->regs + (reg))
-#define tw32_rx_mbox(reg, val)  _tw32_rx_mbox(tp, reg, val)
-#define tw32_tx_mbox(reg, val)  _tw32_tx_mbox(tp, reg, val)
+static void tg3_write32(struct tg3 *tp, u32 off, u32 val)
+{
+	writel(val, tp->regs + off);
+}
+
+static u32 tg3_read32(struct tg3 *tp, u32 off)
+{
+	return (readl(tp->regs + off)); 
+}
+
+#define tw32_mailbox(reg, val)	tp->write32_mbox(tp, reg, val)
+#define tw32_mailbox_f(reg, val)	tw32_mailbox_flush(tp, (reg), (val))
+#define tw32_rx_mbox(reg, val)	tp->write32_rx_mbox(tp, reg, val)
+#define tw32_tx_mbox(reg, val)	tp->write32_tx_mbox(tp, reg, val)
+#define tr32_mailbox(reg)	tp->read32_mbox(tp, reg)
 
-#define tw32(reg,val)		tg3_write_indirect_reg32(tp,(reg),(val))
+#define tw32(reg,val)		tp->write32(tp, reg, val)
 #define tw32_f(reg,val)		_tw32_flush(tp,(reg),(val))
-#define tw16(reg,val)		writew(((val) & 0xffff), tp->regs + (reg))
-#define tw8(reg,val)		writeb(((val) & 0xff), tp->regs + (reg))
-#define tr32(reg)		readl(tp->regs + (reg))
-#define tr16(reg)		readw(tp->regs + (reg))
-#define tr8(reg)		readb(tp->regs + (reg))
+#define tr32(reg)		tp->read32(tp, reg)
 
 static void tg3_write_mem(struct tg3 *tp, u32 off, u32 val)
 {
-	spin_lock_bh(&tp->indirect_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
 	pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
 	pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
 
 	/* Always leave this as zero. */
 	pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
-	spin_unlock_bh(&tp->indirect_lock);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
 }
 
 static void tg3_read_mem(struct tg3 *tp, u32 off, u32 *val)
 {
-	spin_lock_bh(&tp->indirect_lock);
+	unsigned long flags;
+
+	spin_lock_irqsave(&tp->indirect_lock, flags);
 	pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, off);
 	pci_read_config_dword(tp->pdev, TG3PCI_MEM_WIN_DATA, val);
 
 	/* Always leave this as zero. */
 	pci_write_config_dword(tp->pdev, TG3PCI_MEM_WIN_BASE_ADDR, 0);
-	spin_unlock_bh(&tp->indirect_lock);
+	spin_unlock_irqrestore(&tp->indirect_lock, flags);
 }
 
 static void tg3_disable_ints(struct tg3 *tp)
 {
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     (tp->misc_host_ctrl | MISC_HOST_CTRL_MASK_PCI_INT));
-	tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
-	tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0x00000001);
 }
 
 static inline void tg3_cond_int(struct tg3 *tp)
@@ -439,9 +501,8 @@ static void tg3_enable_ints(struct tg3 *tp)
 
 	tw32(TG3PCI_MISC_HOST_CTRL,
 	     (tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
-	tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
-		     (tp->last_tag << 24));
-	tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+		       (tp->last_tag << 24));
 	tg3_cond_int(tp);
 }
 
@@ -472,8 +533,6 @@ static inline unsigned int tg3_has_work(struct tg3 *tp)
  */
 static void tg3_restart_ints(struct tg3 *tp)
 {
-	tw32(TG3PCI_MISC_HOST_CTRL,
-		(tp->misc_host_ctrl & ~MISC_HOST_CTRL_MASK_PCI_INT));
 	tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
 		     tp->last_tag << 24);
 	mmiowb();
@@ -3278,9 +3337,8 @@ static irqreturn_t tg3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
 			/* No work, shared interrupt perhaps?  re-enable
 			 * interrupts, and flush that PCI write
 			 */
-			tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+			tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
 			     	0x00000000);
-			tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
 		}
 	} else {	/* shared interrupt */
 		handled = 0;
@@ -3323,9 +3381,8 @@ static irqreturn_t tg3_interrupt_tagged(int irq, void *dev_id, struct pt_regs *r
 			/* no work, shared interrupt perhaps?  re-enable
 			 * interrupts, and flush that PCI write
 			 */
-			tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
-				     tp->last_tag << 24);
-			tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+			tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW,
+				       tp->last_tag << 24);
 		}
 	} else {	/* shared interrupt */
 		handled = 0;
@@ -4216,7 +4273,7 @@ static void tg3_stop_fw(struct tg3 *);
 static int tg3_chip_reset(struct tg3 *tp)
 {
 	u32 val;
-	u32 flags_save;
+	void (*write_op)(struct tg3 *, u32, u32);
 	int i;
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_SUN_570X))
@@ -4228,8 +4285,9 @@ static int tg3_chip_reset(struct tg3 *tp)
 	 * fun things.  So, temporarily disable the 5701
 	 * hardware workaround, while we do the reset.
 	 */
-	flags_save = tp->tg3_flags;
-	tp->tg3_flags &= ~TG3_FLAG_5701_REG_WRITE_BUG;
+	write_op = tp->write32;
+	if (write_op == tg3_write_flush_reg32)
+		tp->write32 = tg3_write32;
 
 	/* do the reset */
 	val = GRC_MISC_CFG_CORECLK_RESET;
@@ -4248,8 +4306,8 @@ static int tg3_chip_reset(struct tg3 *tp)
 		val |= GRC_MISC_CFG_KEEP_GPHY_POWER;
 	tw32(GRC_MISC_CFG, val);
 
-	/* restore 5701 hardware bug workaround flag */
-	tp->tg3_flags = flags_save;
+	/* restore 5701 hardware bug workaround write method */
+	tp->write32 = write_op;
 
 	/* Unfortunately, we have to delay before the PCI read back.
 	 * Some 575X chips even will not respond to a PCI cfg access
@@ -4635,7 +4693,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
 				 int cpu_scratch_size, struct fw_info *info)
 {
 	int err, i;
-	u32 orig_tg3_flags = tp->tg3_flags;
 	void (*write_op)(struct tg3 *, u32, u32);
 
 	if (cpu_base == TX_CPU_BASE &&
@@ -4651,11 +4708,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
 	else
 		write_op = tg3_write_indirect_reg32;
 
-	/* Force use of PCI config space for indirect register
-	 * write calls.
-	 */
-	tp->tg3_flags |= TG3_FLAG_PCIX_TARGET_HWBUG;
-
 	/* It is possible that bootcode is still loading at this point.
 	 * Get the nvram lock first before halting the cpu.
 	 */
@@ -4691,7 +4743,6 @@ static int tg3_load_firmware_cpu(struct tg3 *tp, u32 cpu_base, u32 cpu_scratch_b
 	err = 0;
 
 out:
-	tp->tg3_flags = orig_tg3_flags;
 	return err;
 }
 
@@ -5808,8 +5859,7 @@ static int tg3_reset_hw(struct tg3 *tp)
 	tw32_f(GRC_LOCAL_CTRL, tp->grc_local_ctrl);
 	udelay(100);
 
-	tw32_mailbox(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
-	tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+	tw32_mailbox_f(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW, 0);
 	tp->last_tag = 0;
 
 	if (!(tp->tg3_flags2 & TG3_FLG2_5705_PLUS)) {
@@ -6198,7 +6248,8 @@ static int tg3_test_interrupt(struct tg3 *tp)
 	       HOSTCC_MODE_NOW);
 
 	for (i = 0; i < 5; i++) {
-		int_mbox = tr32(MAILBOX_INTERRUPT_0 + TG3_64BIT_REG_LOW);
+		int_mbox = tr32_mailbox(MAILBOX_INTERRUPT_0 +
+					TG3_64BIT_REG_LOW);
 		if (int_mbox != 0)
 			break;
 		msleep(10);
@@ -6598,10 +6649,10 @@ static int tg3_open(struct net_device *dev)
 
 	/* Mailboxes */
 	printk("DEBUG: SNDHOST_PROD[%08x%08x] SNDNIC_PROD[%08x%08x]\n",
-	       tr32(MAILBOX_SNDHOST_PROD_IDX_0 + 0x0),
-	       tr32(MAILBOX_SNDHOST_PROD_IDX_0 + 0x4),
-	       tr32(MAILBOX_SNDNIC_PROD_IDX_0 + 0x0),
-	       tr32(MAILBOX_SNDNIC_PROD_IDX_0 + 0x4));
+	       tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x0),
+	       tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + 0x4),
+	       tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x0),
+	       tr32_mailbox(MAILBOX_SNDNIC_PROD_IDX_0 + 0x4));
 
 	/* NIC side send descriptors. */
 	for (i = 0; i < 6; i++) {
@@ -7865,8 +7916,6 @@ static int tg3_test_loopback(struct tg3 *tp)
 
 	err = -EIO;
 
-	tg3_abort_hw(tp, 1);
-
 	tg3_reset_hw(tp);
 
 	mac_mode = (tp->mac_mode & ~MAC_MODE_PORT_MODE_MASK) |
@@ -7903,7 +7952,7 @@ static int tg3_test_loopback(struct tg3 *tp)
 	num_pkts++;
 
 	tw32_tx_mbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW, send_idx);
-	tr32(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
+	tr32_mailbox(MAILBOX_SNDHOST_PROD_IDX_0 + TG3_64BIT_REG_LOW);
 
 	udelay(10);
 
@@ -9155,14 +9204,6 @@ static int __devinit tg3_is_sun_570X(struct tg3 *tp)
 static int __devinit tg3_get_invariants(struct tg3 *tp)
 {
 	static struct pci_device_id write_reorder_chipsets[] = {
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
-		             PCI_DEVICE_ID_INTEL_82801AA_8) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
-		             PCI_DEVICE_ID_INTEL_82801AB_8) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
-		             PCI_DEVICE_ID_INTEL_82801BA_11) },
-		{ PCI_DEVICE(PCI_VENDOR_ID_INTEL,
-		             PCI_DEVICE_ID_INTEL_82801BA_6) },
 		{ PCI_DEVICE(PCI_VENDOR_ID_AMD,
 		             PCI_DEVICE_ID_AMD_FE_GATE_700C) },
 		{ },
@@ -9179,7 +9220,7 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		tp->tg3_flags2 |= TG3_FLG2_SUN_570X;
 #endif
 
-	/* If we have an AMD 762 or Intel ICH/ICH0/ICH2 chipset, write
+	/* If we have an AMD 762 chipset, write
 	 * reordering to the mailbox registers done by the host
 	 * controller can cause major troubles.  We read back from
 	 * every mailbox register write to force the writes to be
@@ -9217,6 +9258,69 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	if (tp->pci_chip_rev_id == CHIPREV_ID_5752_A0_HW)
 		tp->pci_chip_rev_id = CHIPREV_ID_5752_A0;
 
+	/* If we have 5702/03 A1 or A2 on certain ICH chipsets,
+	 * we need to disable memory and use config. cycles
+	 * only to access all registers. The 5702/03 chips
+	 * can mistakenly decode the special cycles from the
+	 * ICH chipsets as memory write cycles, causing corruption
+	 * of register and memory space. Only certain ICH bridges
+	 * will drive special cycles with non-zero data during the
+	 * address phase which can fall within the 5703's address
+	 * range. This is not an ICH bug as the PCI spec allows
+	 * non-zero address during special cycles. However, only
+	 * these ICH bridges are known to drive non-zero addresses
+	 * during special cycles.
+	 *
+	 * Since special cycles do not cross PCI bridges, we only
+	 * enable this workaround if the 5703 is on the secondary
+	 * bus of these ICH bridges.
+	 */
+	if ((tp->pci_chip_rev_id == CHIPREV_ID_5703_A1) ||
+	    (tp->pci_chip_rev_id == CHIPREV_ID_5703_A2)) {
+		static struct tg3_dev_id {
+			u32	vendor;
+			u32	device;
+			u32	rev;
+		} ich_chipsets[] = {
+			{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_8,
+			  PCI_ANY_ID },
+			{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_8,
+			  PCI_ANY_ID },
+			{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_11,
+			  0xa },
+			{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_6,
+			  PCI_ANY_ID },
+			{ },
+		};
+		struct tg3_dev_id *pci_id = &ich_chipsets[0];
+		struct pci_dev *bridge = NULL;
+
+		while (pci_id->vendor != 0) {
+			bridge = pci_get_device(pci_id->vendor, pci_id->device,
+						bridge);
+			if (!bridge) {
+				pci_id++;
+				continue;
+			}
+			if (pci_id->rev != PCI_ANY_ID) {
+				u8 rev;
+
+				pci_read_config_byte(bridge, PCI_REVISION_ID,
+						     &rev);
+				if (rev > pci_id->rev)
+					continue;
+			}
+			if (bridge->subordinate &&
+			    (bridge->subordinate->number ==
+			     tp->pdev->bus->number)) {
+
+				tp->tg3_flags2 |= TG3_FLG2_ICH_WORKAROUND;
+				pci_dev_put(bridge);
+				break;
+			}
+		}
+	}
+
 	/* Find msi capability. */
 	if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5780)
 		tp->msi_cap = pci_find_capability(tp->pdev, PCI_CAP_ID_MSI);
@@ -9304,6 +9408,12 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		}
 	}
 
+	/* 5700 BX chips need to have their TX producer index mailboxes
+	 * written twice to workaround a bug.
+	 */
+	if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX)
+		tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
+
 	/* Back to back register writes can cause problems on this chip,
 	 * the workaround is to read back all reg writes except those to
 	 * mailbox regs.  See tg3_write_indirect_reg32().
@@ -9327,6 +9437,43 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 		pci_write_config_dword(tp->pdev, TG3PCI_PCISTATE, pci_state_reg);
 	}
 
+	/* Default fast path register access methods */
+	tp->read32 = tg3_read32;
+	tp->write32 = tg3_write32;
+	tp->read32_mbox = tg3_read32;
+	tp->write32_mbox = tg3_write32;
+	tp->write32_tx_mbox = tg3_write32;
+	tp->write32_rx_mbox = tg3_write32;
+
+	/* Various workaround register access methods */
+	if (tp->tg3_flags & TG3_FLAG_PCIX_TARGET_HWBUG)
+		tp->write32 = tg3_write_indirect_reg32;
+	else if (tp->tg3_flags & TG3_FLAG_5701_REG_WRITE_BUG)
+		tp->write32 = tg3_write_flush_reg32;
+
+	if ((tp->tg3_flags & TG3_FLAG_TXD_MBOX_HWBUG) ||
+	    (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)) {
+		tp->write32_tx_mbox = tg3_write32_tx_mbox;
+		if (tp->tg3_flags & TG3_FLAG_MBOX_WRITE_REORDER)
+			tp->write32_rx_mbox = tg3_write_flush_reg32;
+	}
+
+	if (tp->tg3_flags2 & TG3_FLG2_ICH_WORKAROUND) {
+		tp->read32 = tg3_read_indirect_reg32;
+		tp->write32 = tg3_write_indirect_reg32;
+		tp->read32_mbox = tg3_read_indirect_mbox;
+		tp->write32_mbox = tg3_write_indirect_mbox;
+		tp->write32_tx_mbox = tg3_write_indirect_mbox;
+		tp->write32_rx_mbox = tg3_write_indirect_mbox;
+
+		iounmap(tp->regs);
+		tp->regs = 0;
+
+		pci_read_config_word(tp->pdev, PCI_COMMAND, &pci_cmd);
+		pci_cmd &= ~PCI_COMMAND_MEMORY;
+		pci_write_config_word(tp->pdev, PCI_COMMAND, pci_cmd);
+	}
+
 	/* Get eeprom hw config before calling tg3_set_power_state().
 	 * In particular, the TG3_FLAG_EEPROM_WRITE_PROT flag must be
 	 * determined before calling tg3_set_power_state() so that
@@ -9541,14 +9688,6 @@ static int __devinit tg3_get_invariants(struct tg3 *tp)
 	else
 		tp->tg3_flags &= ~TG3_FLAG_POLL_SERDES;
 
-	/* 5700 BX chips need to have their TX producer index mailboxes
-	 * written twice to workaround a bug.
-	 */
-	if (GET_CHIP_REV(tp->pci_chip_rev_id) == CHIPREV_5700_BX)
-		tp->tg3_flags |= TG3_FLAG_TXD_MBOX_HWBUG;
-	else
-		tp->tg3_flags &= ~TG3_FLAG_TXD_MBOX_HWBUG;
-
 	/* It seems all chips can get confused if TX buffers
 	 * straddle the 4GB address boundary in some cases.
 	 */
@@ -10471,7 +10610,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
 	return 0;
 
 err_out_iounmap:
-	iounmap(tp->regs);
+	if (tp->regs) {
+		iounmap(tp->regs);
+		tp->regs = 0;
+	}
 
 err_out_free_dev:
 	free_netdev(dev);
@@ -10493,7 +10635,10 @@ static void __devexit tg3_remove_one(struct pci_dev *pdev)
 		struct tg3 *tp = netdev_priv(dev);
 
 		unregister_netdev(dev);
-		iounmap(tp->regs);
+		if (tp->regs) {
+			iounmap(tp->regs);
+			tp->regs = 0;
+		}
 		free_netdev(dev);
 		pci_release_regions(pdev);
 		pci_disable_device(pdev);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 5c4433c147f..c184b773e58 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2049,6 +2049,11 @@ struct tg3 {
 	spinlock_t			lock;
 	spinlock_t			indirect_lock;
 
+	u32				(*read32) (struct tg3 *, u32);
+	void				(*write32) (struct tg3 *, u32, u32);
+	u32				(*read32_mbox) (struct tg3 *, u32);
+	void				(*write32_mbox) (struct tg3 *, u32,
+							 u32);
 	void __iomem			*regs;
 	struct net_device		*dev;
 	struct pci_dev			*pdev;
@@ -2060,6 +2065,8 @@ struct tg3 {
 	u32				msg_enable;
 
 	/* begin "tx thread" cacheline section */
+	void				(*write32_tx_mbox) (struct tg3 *, u32,
+							    u32);
 	u32				tx_prod;
 	u32				tx_cons;
 	u32				tx_pending;
@@ -2071,6 +2078,8 @@ struct tg3 {
 	dma_addr_t			tx_desc_mapping;
 
 	/* begin "rx thread" cacheline section */
+	void				(*write32_rx_mbox) (struct tg3 *, u32,
+							    u32);
 	u32				rx_rcb_ptr;
 	u32				rx_std_ptr;
 	u32				rx_jumbo_ptr;
@@ -2165,6 +2174,7 @@ struct tg3 {
 #define TG3_FLG2_ANY_SERDES		(TG3_FLG2_PHY_SERDES |	\
 					TG3_FLG2_MII_SERDES)
 #define TG3_FLG2_PARALLEL_DETECT	0x01000000
+#define TG3_FLG2_ICH_WORKAROUND		0x02000000
 
 	u32				split_mode_max_reqs;
 #define SPLIT_MODE_5704_MAX_REQ		3
diff --git a/drivers/net/tokenring/Kconfig b/drivers/net/tokenring/Kconfig
index 7e99e9f8045..e4cfc80b283 100644
--- a/drivers/net/tokenring/Kconfig
+++ b/drivers/net/tokenring/Kconfig
@@ -84,7 +84,7 @@ config 3C359
 
 config TMS380TR
 	tristate "Generic TMS380 Token Ring ISA/PCI adapter support"
-	depends on TR && (PCI || ISA && ISA_DMA_API)
+	depends on TR && (PCI || ISA && ISA_DMA_API || MCA)
 	select FW_LOADER
 	---help---
 	  This driver provides generic support for token ring adapters
@@ -158,7 +158,7 @@ config ABYSS
 
 config MADGEMC
 	tristate "Madge Smart 16/4 Ringnode MicroChannel"
-	depends on TR && TMS380TR && MCA_LEGACY
+	depends on TR && TMS380TR && MCA
 	help
 	  This tms380 module supports the Madge Smart 16/4 MC16 and MC32
 	  MicroChannel adapters.
diff --git a/drivers/net/tokenring/abyss.c b/drivers/net/tokenring/abyss.c
index 87103c40099..9345e68c451 100644
--- a/drivers/net/tokenring/abyss.c
+++ b/drivers/net/tokenring/abyss.c
@@ -139,7 +139,7 @@ static int __devinit abyss_attach(struct pci_dev *pdev, const struct pci_device_
 	 */
 	dev->base_addr += 0x10;
 		
-	ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev);
+	ret = tmsdev_init(dev, &pdev->dev);
 	if (ret) {
 		printk("%s: unable to get memory for dev->priv.\n", 
 		       dev->name);
diff --git a/drivers/net/tokenring/madgemc.c b/drivers/net/tokenring/madgemc.c
index 659cbdbef7f..3a25d191ea4 100644
--- a/drivers/net/tokenring/madgemc.c
+++ b/drivers/net/tokenring/madgemc.c
@@ -20,7 +20,7 @@
 static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
 
 #include <linux/module.h>
-#include <linux/mca-legacy.h>
+#include <linux/mca.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/pci.h>
@@ -38,9 +38,7 @@ static const char version[] = "madgemc.c: v0.91 23/01/2000 by Adam Fritzler\n";
 #define MADGEMC_IO_EXTENT 32
 #define MADGEMC_SIF_OFFSET 0x08
 
-struct madgemc_card {
-	struct net_device *dev;
-
+struct card_info {
 	/*
 	 * These are read from the BIA ROM.
 	 */
@@ -57,16 +55,12 @@ struct madgemc_card {
 	unsigned int arblevel:4;
 	unsigned int ringspeed:2; /* 0 = 4mb, 1 = 16, 2 = Auto/none */
 	unsigned int cabletype:1; /* 0 = RJ45, 1 = DB9 */
-
-	struct madgemc_card *next;
 };
-static struct madgemc_card *madgemc_card_list;
-
 
 static int madgemc_open(struct net_device *dev);
 static int madgemc_close(struct net_device *dev);
 static int madgemc_chipset_init(struct net_device *dev);
-static void madgemc_read_rom(struct madgemc_card *card);
+static void madgemc_read_rom(struct net_device *dev, struct card_info *card);
 static unsigned short madgemc_setnselout_pins(struct net_device *dev);
 static void madgemc_setcabletype(struct net_device *dev, int type);
 
@@ -151,261 +145,237 @@ static void madgemc_sifwritew(struct net_device *dev, unsigned short val, unsign
 
 
 
-static int __init madgemc_probe(void)
+static int __devinit madgemc_probe(struct device *device)
 {	
 	static int versionprinted;
 	struct net_device *dev;
 	struct net_local *tp;
-	struct madgemc_card *card;
-	int i,slot = 0;
-	__u8 posreg[4];
-
-	if (!MCA_bus)
-		return -1;	
- 
-	while (slot != MCA_NOTFOUND) {
-		/*
-		 * Currently we only support the MC16/32 (MCA ID 002d)
-		 */
-		slot = mca_find_unused_adapter(0x002d, slot);
-		if (slot == MCA_NOTFOUND)
-			break;
-
-		/*
-		 * If we get here, we have an adapter.
-		 */
-		if (versionprinted++ == 0)
-			printk("%s", version);
-
-		dev = alloc_trdev(sizeof(struct net_local));
-		if (dev == NULL) {
-			printk("madgemc: unable to allocate dev space\n");
-			if (madgemc_card_list)
-				return 0;
-			return -1;
-		}
+	struct card_info *card;
+	struct mca_device *mdev = to_mca_device(device);
+	int ret = 0, i = 0;
+
+	if (versionprinted++ == 0)
+		printk("%s", version);
+
+	if(mca_device_claimed(mdev))
+		return -EBUSY;
+	mca_device_set_claim(mdev, 1);
+
+	dev = alloc_trdev(sizeof(struct net_local));
+	if (!dev) {
+		printk("madgemc: unable to allocate dev space\n");
+		mca_device_set_claim(mdev, 0);
+		ret = -ENOMEM;
+		goto getout;
+	}
 
-		SET_MODULE_OWNER(dev);
-		dev->dma = 0;
+	SET_MODULE_OWNER(dev);
+	dev->dma = 0;
 
-		/*
-		 * Fetch MCA config registers
-		 */
-		for(i=0;i<4;i++)
-			posreg[i] = mca_read_stored_pos(slot, i+2);
-		
-		card = kmalloc(sizeof(struct madgemc_card), GFP_KERNEL);
-		if (card==NULL) {
-			printk("madgemc: unable to allocate card struct\n");
-			free_netdev(dev);
-			if (madgemc_card_list)
-				return 0;
-			return -1;
-		}
-		card->dev = dev;
-
-		/*
-		 * Parse configuration information.  This all comes
-		 * directly from the publicly available @002d.ADF.
-		 * Get it from Madge or your local ADF library.
-		 */
-
-		/*
-		 * Base address 
-		 */
-		dev->base_addr = 0x0a20 + 
-			((posreg[2] & MC16_POS2_ADDR2)?0x0400:0) +
-			((posreg[0] & MC16_POS0_ADDR1)?0x1000:0) +
-			((posreg[3] & MC16_POS3_ADDR3)?0x2000:0);
-
-		/*
-		 * Interrupt line
-		 */
-		switch(posreg[0] >> 6) { /* upper two bits */
+	card = kmalloc(sizeof(struct card_info), GFP_KERNEL);
+	if (card==NULL) {
+		printk("madgemc: unable to allocate card struct\n");
+		ret = -ENOMEM;
+		goto getout1;
+	}
+
+	/*
+	 * Parse configuration information.  This all comes
+	 * directly from the publicly available @002d.ADF.
+	 * Get it from Madge or your local ADF library.
+	 */
+
+	/*
+	 * Base address 
+	 */
+	dev->base_addr = 0x0a20 + 
+		((mdev->pos[2] & MC16_POS2_ADDR2)?0x0400:0) +
+		((mdev->pos[0] & MC16_POS0_ADDR1)?0x1000:0) +
+		((mdev->pos[3] & MC16_POS3_ADDR3)?0x2000:0);
+
+	/*
+	 * Interrupt line
+	 */
+	switch(mdev->pos[0] >> 6) { /* upper two bits */
 		case 0x1: dev->irq = 3; break;
 		case 0x2: dev->irq = 9; break; /* IRQ 2 = IRQ 9 */
 		case 0x3: dev->irq = 10; break;
 		default: dev->irq = 0; break;
-		}
+	}
 
-		if (dev->irq == 0) {
-			printk("%s: invalid IRQ\n", dev->name);
-			goto getout1;
-		}
+	if (dev->irq == 0) {
+		printk("%s: invalid IRQ\n", dev->name);
+		ret = -EBUSY;
+		goto getout2;
+	}
 
-		if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, 
-				   "madgemc")) {
-			printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", slot, dev->base_addr);
-			dev->base_addr += MADGEMC_SIF_OFFSET;
-			goto getout1;
-		}
+	if (!request_region(dev->base_addr, MADGEMC_IO_EXTENT, 
+			   "madgemc")) {
+		printk(KERN_INFO "madgemc: unable to setup Smart MC in slot %d because of I/O base conflict at 0x%04lx\n", mdev->slot, dev->base_addr);
 		dev->base_addr += MADGEMC_SIF_OFFSET;
+		ret = -EBUSY;
+		goto getout2;
+	}
+	dev->base_addr += MADGEMC_SIF_OFFSET;
+	
+	/*
+	 * Arbitration Level
+	 */
+	card->arblevel = ((mdev->pos[0] >> 1) & 0x7) + 8;
+
+	/*
+	 * Burst mode and Fairness
+	 */
+	card->burstmode = ((mdev->pos[2] >> 6) & 0x3);
+	card->fairness = ((mdev->pos[2] >> 4) & 0x1);
+
+	/*
+	 * Ring Speed
+	 */
+	if ((mdev->pos[1] >> 2)&0x1)
+		card->ringspeed = 2; /* not selected */
+	else if ((mdev->pos[2] >> 5) & 0x1)
+		card->ringspeed = 1; /* 16Mb */
+	else
+		card->ringspeed = 0; /* 4Mb */
+
+	/* 
+	 * Cable type
+	 */
+	if ((mdev->pos[1] >> 6)&0x1)
+		card->cabletype = 1; /* STP/DB9 */
+	else
+		card->cabletype = 0; /* UTP/RJ-45 */
+
+
+	/* 
+	 * ROM Info. This requires us to actually twiddle
+	 * bits on the card, so we must ensure above that 
+	 * the base address is free of conflict (request_region above).
+	 */
+	madgemc_read_rom(dev, card);
 		
-		/*
-		 * Arbitration Level
-		 */
-		card->arblevel = ((posreg[0] >> 1) & 0x7) + 8;
-
-		/*
-		 * Burst mode and Fairness
-		 */
-		card->burstmode = ((posreg[2] >> 6) & 0x3);
-		card->fairness = ((posreg[2] >> 4) & 0x1);
-
-		/*
-		 * Ring Speed
-		 */
-		if ((posreg[1] >> 2)&0x1)
-			card->ringspeed = 2; /* not selected */
-		else if ((posreg[2] >> 5) & 0x1)
-			card->ringspeed = 1; /* 16Mb */
-		else
-			card->ringspeed = 0; /* 4Mb */
-
-		/* 
-		 * Cable type
-		 */
-		if ((posreg[1] >> 6)&0x1)
-			card->cabletype = 1; /* STP/DB9 */
-		else
-			card->cabletype = 0; /* UTP/RJ-45 */
-
-
-		/* 
-		 * ROM Info. This requires us to actually twiddle
-		 * bits on the card, so we must ensure above that 
-		 * the base address is free of conflict (request_region above).
-		 */
-		madgemc_read_rom(card);
-		
-		if (card->manid != 0x4d) { /* something went wrong */
-			printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid);
-			goto getout;
-		}
+	if (card->manid != 0x4d) { /* something went wrong */
+		printk(KERN_INFO "%s: Madge MC ROM read failed (unknown manufacturer ID %02x)\n", dev->name, card->manid);
+		goto getout3;
+	}
 		
-		if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) {
-			printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype);
-			goto getout;
-		}
+	if ((card->cardtype != 0x08) && (card->cardtype != 0x0d)) {
+		printk(KERN_INFO "%s: Madge MC ROM read failed (unknown card ID %02x)\n", dev->name, card->cardtype);
+		ret = -EIO;
+		goto getout3;
+	}
 	       
-		/* All cards except Rev 0 and 1 MC16's have 256kb of RAM */
-		if ((card->cardtype == 0x08) && (card->cardrev <= 0x01))
-			card->ramsize = 128;
-		else
-			card->ramsize = 256;
-
-		printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", 
-		       dev->name, 
-		       (card->cardtype == 0x08)?MADGEMC16_CARDNAME:
-		       MADGEMC32_CARDNAME, card->cardrev, 
-		       dev->base_addr, dev->irq);
-
-		if (card->cardtype == 0x0d)
-			printk("%s:     Warning: MC32 support is experimental and highly untested\n", dev->name);
-		
-		if (card->ringspeed==2) { /* Unknown */
-			printk("%s:     Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name);
-			card->ringspeed = 1; /* default to 16mb */
-		}
+	/* All cards except Rev 0 and 1 MC16's have 256kb of RAM */
+	if ((card->cardtype == 0x08) && (card->cardrev <= 0x01))
+		card->ramsize = 128;
+	else
+		card->ramsize = 256;
+
+	printk("%s: %s Rev %d at 0x%04lx IRQ %d\n", 
+	       dev->name, 
+	       (card->cardtype == 0x08)?MADGEMC16_CARDNAME:
+	       MADGEMC32_CARDNAME, card->cardrev, 
+	       dev->base_addr, dev->irq);
+
+	if (card->cardtype == 0x0d)
+		printk("%s:     Warning: MC32 support is experimental and highly untested\n", dev->name);
+	
+	if (card->ringspeed==2) { /* Unknown */
+		printk("%s:     Warning: Ring speed not set in POS -- Please run the reference disk and set it!\n", dev->name);
+		card->ringspeed = 1; /* default to 16mb */
+	}
 		
-		printk("%s:     RAM Size: %dKB\n", dev->name, card->ramsize);
+	printk("%s:     RAM Size: %dKB\n", dev->name, card->ramsize);
 
-		printk("%s:     Ring Speed: %dMb/sec on %s\n", dev->name, 
-		       (card->ringspeed)?16:4, 
-		       card->cabletype?"STP/DB9":"UTP/RJ-45");
-		printk("%s:     Arbitration Level: %d\n", dev->name, 
-		       card->arblevel);
+	printk("%s:     Ring Speed: %dMb/sec on %s\n", dev->name, 
+	       (card->ringspeed)?16:4, 
+	       card->cabletype?"STP/DB9":"UTP/RJ-45");
+	printk("%s:     Arbitration Level: %d\n", dev->name, 
+	       card->arblevel);
 
-		printk("%s:     Burst Mode: ", dev->name);
-		switch(card->burstmode) {
+	printk("%s:     Burst Mode: ", dev->name);
+	switch(card->burstmode) {
 		case 0: printk("Cycle steal"); break;
 		case 1: printk("Limited burst"); break;
 		case 2: printk("Delayed release"); break;
 		case 3: printk("Immediate release"); break;
-		}
-		printk(" (%s)\n", (card->fairness)?"Unfair":"Fair");
-
-
-		/* 
-		 * Enable SIF before we assign the interrupt handler,
-		 * just in case we get spurious interrupts that need
-		 * handling.
-		 */ 
-		outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
-		madgemc_setsifsel(dev, 1);
-		if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
-			       "madgemc", dev)) 
-			goto getout;
-		
-		madgemc_chipset_init(dev); /* enables interrupts! */
-		madgemc_setcabletype(dev, card->cabletype);
+	}
+	printk(" (%s)\n", (card->fairness)?"Unfair":"Fair");
 
-		/* Setup MCA structures */
-		mca_set_adapter_name(slot, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME);
-		mca_set_adapter_procfn(slot, madgemc_mcaproc, dev);
-		mca_mark_as_used(slot);
 
-		printk("%s:     Ring Station Address: ", dev->name);
-		printk("%2.2x", dev->dev_addr[0]);
-		for (i = 1; i < 6; i++)
-			printk(":%2.2x", dev->dev_addr[i]);
-		printk("\n");
-
-		/* XXX is ISA_MAX_ADDRESS correct here? */
-		if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL)) {
-			printk("%s: unable to get memory for dev->priv.\n", 
-			       dev->name);
-			release_region(dev->base_addr-MADGEMC_SIF_OFFSET, 
-			       MADGEMC_IO_EXTENT); 
-			
-			kfree(card);
-			tmsdev_term(dev);
-			free_netdev(dev);
-			if (madgemc_card_list)
-				return 0;
-			return -1;
-		}
-		tp = netdev_priv(dev);
-
-		/* 
-		 * The MC16 is physically a 32bit card.  However, Madge
-		 * insists on calling it 16bit, so I'll assume here that
-		 * they know what they're talking about.  Cut off DMA
-		 * at 16mb.
-		 */
-		tp->setnselout = madgemc_setnselout_pins;
-		tp->sifwriteb = madgemc_sifwriteb;
-		tp->sifreadb = madgemc_sifreadb;
-		tp->sifwritew = madgemc_sifwritew;
-		tp->sifreadw = madgemc_sifreadw;
-		tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4;
-
-		memcpy(tp->ProductID, "Madge MCA 16/4    ", PROD_ID_SIZE + 1);
-
-		dev->open = madgemc_open;
-		dev->stop = madgemc_close;
-
-		if (register_netdev(dev) == 0) {
-			/* Enlist in the card list */
-			card->next = madgemc_card_list;
-			madgemc_card_list = card;
-			slot++;
-			continue; /* successful, try to find another */
-		}
-		
-		free_irq(dev->irq, dev);
-	getout:
-		release_region(dev->base_addr-MADGEMC_SIF_OFFSET, 
-			       MADGEMC_IO_EXTENT); 
-	getout1:
-		kfree(card);
-		free_netdev(dev);
-		slot++;
+	/* 
+	 * Enable SIF before we assign the interrupt handler,
+	 * just in case we get spurious interrupts that need
+	 * handling.
+	 */ 
+	outb(0, dev->base_addr + MC_CONTROL_REG0); /* sanity */
+	madgemc_setsifsel(dev, 1);
+	if (request_irq(dev->irq, madgemc_interrupt, SA_SHIRQ,
+		       "madgemc", dev)) {
+		ret = -EBUSY;
+		goto getout3;
 	}
 
-	if (madgemc_card_list)
+	madgemc_chipset_init(dev); /* enables interrupts! */
+	madgemc_setcabletype(dev, card->cabletype);
+
+	/* Setup MCA structures */
+	mca_device_set_name(mdev, (card->cardtype == 0x08)?MADGEMC16_CARDNAME:MADGEMC32_CARDNAME);
+	mca_set_adapter_procfn(mdev->slot, madgemc_mcaproc, dev);
+
+	printk("%s:     Ring Station Address: ", dev->name);
+	printk("%2.2x", dev->dev_addr[0]);
+	for (i = 1; i < 6; i++)
+		printk(":%2.2x", dev->dev_addr[i]);
+	printk("\n");
+
+	if (tmsdev_init(dev, device)) {
+		printk("%s: unable to get memory for dev->priv.\n", 
+		       dev->name);
+		ret = -ENOMEM;
+		goto getout4;
+	}
+	tp = netdev_priv(dev);
+
+	/* 
+	 * The MC16 is physically a 32bit card.  However, Madge
+	 * insists on calling it 16bit, so I'll assume here that
+	 * they know what they're talking about.  Cut off DMA
+	 * at 16mb.
+	 */
+	tp->setnselout = madgemc_setnselout_pins;
+	tp->sifwriteb = madgemc_sifwriteb;
+	tp->sifreadb = madgemc_sifreadb;
+	tp->sifwritew = madgemc_sifwritew;
+	tp->sifreadw = madgemc_sifreadw;
+	tp->DataRate = (card->ringspeed)?SPEED_16:SPEED_4;
+
+	memcpy(tp->ProductID, "Madge MCA 16/4    ", PROD_ID_SIZE + 1);
+
+	dev->open = madgemc_open;
+	dev->stop = madgemc_close;
+
+	tp->tmspriv = card;
+	dev_set_drvdata(device, dev);
+
+	if (register_netdev(dev) == 0)
 		return 0;
-	return -1;
+
+	dev_set_drvdata(device, NULL);
+	ret = -ENOMEM;
+getout4:
+	free_irq(dev->irq, dev);
+getout3:
+	release_region(dev->base_addr-MADGEMC_SIF_OFFSET, 
+		       MADGEMC_IO_EXTENT); 
+getout2:
+	kfree(card);
+getout1:
+	free_netdev(dev);
+getout:
+	mca_device_set_claim(mdev, 0);
+	return ret;
 }
 
 /*
@@ -664,12 +634,12 @@ static void madgemc_chipset_close(struct net_device *dev)
  * is complete.
  *
  */
-static void madgemc_read_rom(struct madgemc_card *card)
+static void madgemc_read_rom(struct net_device *dev, struct card_info *card)
 {
 	unsigned long ioaddr;
 	unsigned char reg0, reg1, tmpreg0, i;
 
-	ioaddr = card->dev->base_addr;
+	ioaddr = dev->base_addr;
 
 	reg0 = inb(ioaddr + MC_CONTROL_REG0);
 	reg1 = inb(ioaddr + MC_CONTROL_REG1);
@@ -686,9 +656,9 @@ static void madgemc_read_rom(struct madgemc_card *card)
 	outb(tmpreg0 | MC_CONTROL_REG0_PAGE, ioaddr + MC_CONTROL_REG0);
 
 	/* Read BIA */
-	card->dev->addr_len = 6;
+	dev->addr_len = 6;
 	for (i = 0; i < 6; i++)
-		card->dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i);
+		dev->dev_addr[i] = inb(ioaddr + MC_ROM_BIA_START + i);
 	
 	/* Restore original register values */
 	outb(reg0, ioaddr + MC_CONTROL_REG0);
@@ -721,14 +691,10 @@ static int madgemc_close(struct net_device *dev)
 static int madgemc_mcaproc(char *buf, int slot, void *d) 
 {	
 	struct net_device *dev = (struct net_device *)d;
-	struct madgemc_card *curcard = madgemc_card_list;
+	struct net_local *tp = dev->priv;
+	struct card_info *curcard = tp->tmspriv;
 	int len = 0;
 	
-	while (curcard) { /* search for card struct */
-		if (curcard->dev == dev)
-			break;
-		curcard = curcard->next;
-	}
 	len += sprintf(buf+len, "-------\n");
 	if (curcard) {
 		struct net_local *tp = netdev_priv(dev);
@@ -763,25 +729,56 @@ static int madgemc_mcaproc(char *buf, int slot, void *d)
 	return len;
 }
 
-static void __exit madgemc_exit(void)
+static int __devexit madgemc_remove(struct device *device)
 {
-	struct net_device *dev;
-	struct madgemc_card *this_card;
-	
-	while (madgemc_card_list) {
-		dev = madgemc_card_list->dev;
-		unregister_netdev(dev);
-		release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT);
-		free_irq(dev->irq, dev);
-		tmsdev_term(dev);
-		free_netdev(dev);
-		this_card = madgemc_card_list;
-		madgemc_card_list = this_card->next;
-		kfree(this_card);
-	}
+	struct net_device *dev = dev_get_drvdata(device);
+	struct net_local *tp;
+        struct card_info *card;
+
+	if (!dev)
+		BUG();
+
+	tp = dev->priv;
+	card = tp->tmspriv;
+	kfree(card);
+	tp->tmspriv = NULL;
+
+	unregister_netdev(dev);
+	release_region(dev->base_addr-MADGEMC_SIF_OFFSET, MADGEMC_IO_EXTENT);
+	free_irq(dev->irq, dev);
+	tmsdev_term(dev);
+	free_netdev(dev);
+	dev_set_drvdata(device, NULL);
+
+	return 0;
+}
+
+static short madgemc_adapter_ids[] __initdata = {
+	0x002d,
+	0x0000
+};
+
+static struct mca_driver madgemc_driver = {
+	.id_table = madgemc_adapter_ids,
+	.driver = {
+		.name = "madgemc",
+		.bus = &mca_bus_type,
+		.probe = madgemc_probe,
+		.remove = __devexit_p(madgemc_remove),
+	},
+};
+
+static int __init madgemc_init (void)
+{
+	return mca_register_driver (&madgemc_driver);
+}
+
+static void __exit madgemc_exit (void)
+{
+	mca_unregister_driver (&madgemc_driver);
 }
 
-module_init(madgemc_probe);
+module_init(madgemc_init);
 module_exit(madgemc_exit);
 
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/tokenring/proteon.c b/drivers/net/tokenring/proteon.c
index 40ad0fde28a..eb1423ede75 100644
--- a/drivers/net/tokenring/proteon.c
+++ b/drivers/net/tokenring/proteon.c
@@ -62,8 +62,7 @@ static int dmalist[] __initdata = {
 };
 
 static char cardname[] = "Proteon 1392\0";
-
-struct net_device *proteon_probe(int unit);
+static u64 dma_mask = ISA_MAX_ADDRESS;
 static int proteon_open(struct net_device *dev);
 static void proteon_read_eeprom(struct net_device *dev);
 static unsigned short proteon_setnselout_pins(struct net_device *dev);
@@ -116,7 +115,7 @@ nodev:
 	return -ENODEV;
 }
 
-static int __init setup_card(struct net_device *dev)
+static int __init setup_card(struct net_device *dev, struct device *pdev)
 {
 	struct net_local *tp;
         static int versionprinted;
@@ -137,7 +136,7 @@ static int __init setup_card(struct net_device *dev)
 		}
 	}
 	if (err)
-		goto out4;
+		goto out5;
 
 	/* At this point we have found a valid card. */
 
@@ -145,14 +144,15 @@ static int __init setup_card(struct net_device *dev)
 		printk(KERN_DEBUG "%s", version);
 
 	err = -EIO;
-	if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL))
+	pdev->dma_mask = &dma_mask;
+	if (tmsdev_init(dev, pdev))
 		goto out4;
 
 	dev->base_addr &= ~3; 
 		
 	proteon_read_eeprom(dev);
 
-	printk(KERN_DEBUG "%s:    Ring Station Address: ", dev->name);
+	printk(KERN_DEBUG "proteon.c:    Ring Station Address: ");
 	printk("%2.2x", dev->dev_addr[0]);
 	for (j = 1; j < 6; j++)
 		printk(":%2.2x", dev->dev_addr[j]);
@@ -185,7 +185,7 @@ static int __init setup_card(struct net_device *dev)
 		
                 if(irqlist[j] == 0)
                 {
-                        printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name);
+                        printk(KERN_INFO "proteon.c: AutoSelect no IRQ available\n");
 			goto out3;
 		}
 	}
@@ -196,15 +196,15 @@ static int __init setup_card(struct net_device *dev)
 				break;
 		if (irqlist[j] == 0)
 		{
-			printk(KERN_INFO "%s: Illegal IRQ %d specified\n",
-				dev->name, dev->irq);
+			printk(KERN_INFO "proteon.c: Illegal IRQ %d specified\n",
+				dev->irq);
 			goto out3;
 		}
 		if (request_irq(dev->irq, tms380tr_interrupt, 0, 
 			cardname, dev))
 		{
-                        printk(KERN_INFO "%s: Selected IRQ %d not available\n", 
-				dev->name, dev->irq);
+                        printk(KERN_INFO "proteon.c: Selected IRQ %d not available\n",
+				dev->irq);
 			goto out3;
 		}
 	}
@@ -220,7 +220,7 @@ static int __init setup_card(struct net_device *dev)
 
 		if(dmalist[j] == 0)
 		{
-			printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name);
+			printk(KERN_INFO "proteon.c: AutoSelect no DMA available\n");
 			goto out2;
 		}
 	}
@@ -231,25 +231,25 @@ static int __init setup_card(struct net_device *dev)
 				break;
 		if (dmalist[j] == 0)
 		{
-                        printk(KERN_INFO "%s: Illegal DMA %d specified\n", 
-				dev->name, dev->dma);
+                        printk(KERN_INFO "proteon.c: Illegal DMA %d specified\n",
+				dev->dma);
 			goto out2;
 		}
 		if (request_dma(dev->dma, cardname))
 		{
-                        printk(KERN_INFO "%s: Selected DMA %d not available\n", 
-				dev->name, dev->dma);
+                        printk(KERN_INFO "proteon.c: Selected DMA %d not available\n",
+				dev->dma);
 			goto out2;
 		}
 	}
 
-	printk(KERN_DEBUG "%s:    IO: %#4lx  IRQ: %d  DMA: %d\n",
-	       dev->name, dev->base_addr, dev->irq, dev->dma);
-		
 	err = register_netdev(dev);
 	if (err)
 		goto out;
 
+	printk(KERN_DEBUG "%s:    IO: %#4lx  IRQ: %d  DMA: %d\n",
+	       dev->name, dev->base_addr, dev->irq, dev->dma);
+
 	return 0;
 out:
 	free_dma(dev->dma);
@@ -258,34 +258,11 @@ out2:
 out3:
 	tmsdev_term(dev);
 out4:
-	release_region(dev->base_addr, PROTEON_IO_EXTENT); 
+	release_region(dev->base_addr, PROTEON_IO_EXTENT);
+out5:
 	return err;
 }
 
-struct net_device * __init proteon_probe(int unit)
-{
-	struct net_device *dev = alloc_trdev(sizeof(struct net_local));
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "tr%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-
-	err = setup_card(dev);
-	if (err)
-		goto out;
-
-	return dev;
-
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
 /*
  * Reads MAC address from adapter RAM, which should've read it from
  * the onboard ROM.  
@@ -352,8 +329,6 @@ static int proteon_open(struct net_device *dev)
 	return tms380tr_open(dev);
 }
 
-#ifdef MODULE
-
 #define ISATR_MAX_ADAPTERS 3
 
 static int io[ISATR_MAX_ADAPTERS];
@@ -366,13 +341,23 @@ module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param_array(dma, int, NULL, 0);
 
-static struct net_device *proteon_dev[ISATR_MAX_ADAPTERS];
+static struct platform_device *proteon_dev[ISATR_MAX_ADAPTERS];
+
+static struct device_driver proteon_driver = {
+	.name		= "proteon",
+	.bus		= &platform_bus_type,
+};
 
-int init_module(void)
+static int __init proteon_init(void)
 {
 	struct net_device *dev;
+	struct platform_device *pdev;
 	int i, num = 0, err = 0;
 
+	err = driver_register(&proteon_driver);
+	if (err)
+		return err;
+
 	for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
 		dev = alloc_trdev(sizeof(struct net_local));
 		if (!dev)
@@ -381,11 +366,15 @@ int init_module(void)
 		dev->base_addr = io[i];
 		dev->irq = irq[i];
 		dev->dma = dma[i];
-		err = setup_card(dev);
+		pdev = platform_device_register_simple("proteon",
+			i, NULL, 0);
+		err = setup_card(dev, &pdev->dev);
 		if (!err) {
-			proteon_dev[i] = dev;
+			proteon_dev[i] = pdev;
+			dev_set_drvdata(&pdev->dev, dev);
 			++num;
 		} else {
+			platform_device_unregister(pdev);
 			free_netdev(dev);
 		}
 	}
@@ -399,23 +388,28 @@ int init_module(void)
 	return (0);
 }
 
-void cleanup_module(void)
+static void __exit proteon_cleanup(void)
 {
+	struct net_device *dev;
 	int i;
 
 	for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
-		struct net_device *dev = proteon_dev[i];
+		struct platform_device *pdev = proteon_dev[i];
 		
-		if (!dev) 
+		if (!pdev)
 			continue;
-		
+		dev = dev_get_drvdata(&pdev->dev);
 		unregister_netdev(dev);
 		release_region(dev->base_addr, PROTEON_IO_EXTENT);
 		free_irq(dev->irq, dev);
 		free_dma(dev->dma);
 		tmsdev_term(dev);
 		free_netdev(dev);
+		dev_set_drvdata(&pdev->dev, NULL);
+		platform_device_unregister(pdev);
 	}
+	driver_unregister(&proteon_driver);
 }
-#endif /* MODULE */
 
+module_init(proteon_init);
+module_exit(proteon_cleanup);
diff --git a/drivers/net/tokenring/skisa.c b/drivers/net/tokenring/skisa.c
index f26796e2d0e..3c7c66204f7 100644
--- a/drivers/net/tokenring/skisa.c
+++ b/drivers/net/tokenring/skisa.c
@@ -68,8 +68,7 @@ static int dmalist[] __initdata = {
 };
 
 static char isa_cardname[] = "SK NET TR 4/16 ISA\0";
-
-struct net_device *sk_isa_probe(int unit);
+static u64 dma_mask = ISA_MAX_ADDRESS;
 static int sk_isa_open(struct net_device *dev);
 static void sk_isa_read_eeprom(struct net_device *dev);
 static unsigned short sk_isa_setnselout_pins(struct net_device *dev);
@@ -133,7 +132,7 @@ static int __init sk_isa_probe1(struct net_device *dev, int ioaddr)
 	return 0;
 }
 
-static int __init setup_card(struct net_device *dev)
+static int __init setup_card(struct net_device *dev, struct device *pdev)
 {
 	struct net_local *tp;
         static int versionprinted;
@@ -154,7 +153,7 @@ static int __init setup_card(struct net_device *dev)
 		}
 	}
 	if (err)
-		goto out4;
+		goto out5;
 
 	/* At this point we have found a valid card. */
 
@@ -162,14 +161,15 @@ static int __init setup_card(struct net_device *dev)
 		printk(KERN_DEBUG "%s", version);
 
 	err = -EIO;
-	if (tmsdev_init(dev, ISA_MAX_ADDRESS, NULL))
+	pdev->dma_mask = &dma_mask;
+	if (tmsdev_init(dev, pdev))
 		goto out4;
 
 	dev->base_addr &= ~3; 
 		
 	sk_isa_read_eeprom(dev);
 
-	printk(KERN_DEBUG "%s:    Ring Station Address: ", dev->name);
+	printk(KERN_DEBUG "skisa.c:    Ring Station Address: ");
 	printk("%2.2x", dev->dev_addr[0]);
 	for (j = 1; j < 6; j++)
 		printk(":%2.2x", dev->dev_addr[j]);
@@ -202,7 +202,7 @@ static int __init setup_card(struct net_device *dev)
 		
                 if(irqlist[j] == 0)
                 {
-                        printk(KERN_INFO "%s: AutoSelect no IRQ available\n", dev->name);
+                        printk(KERN_INFO "skisa.c: AutoSelect no IRQ available\n");
 			goto out3;
 		}
 	}
@@ -213,15 +213,15 @@ static int __init setup_card(struct net_device *dev)
 				break;
 		if (irqlist[j] == 0)
 		{
-			printk(KERN_INFO "%s: Illegal IRQ %d specified\n",
-				dev->name, dev->irq);
+			printk(KERN_INFO "skisa.c: Illegal IRQ %d specified\n",
+				dev->irq);
 			goto out3;
 		}
 		if (request_irq(dev->irq, tms380tr_interrupt, 0, 
 			isa_cardname, dev))
 		{
-                        printk(KERN_INFO "%s: Selected IRQ %d not available\n", 
-				dev->name, dev->irq);
+                        printk(KERN_INFO "skisa.c: Selected IRQ %d not available\n",
+				dev->irq);
 			goto out3;
 		}
 	}
@@ -237,7 +237,7 @@ static int __init setup_card(struct net_device *dev)
 
 		if(dmalist[j] == 0)
 		{
-			printk(KERN_INFO "%s: AutoSelect no DMA available\n", dev->name);
+			printk(KERN_INFO "skisa.c: AutoSelect no DMA available\n");
 			goto out2;
 		}
 	}
@@ -248,25 +248,25 @@ static int __init setup_card(struct net_device *dev)
 				break;
 		if (dmalist[j] == 0)
 		{
-                        printk(KERN_INFO "%s: Illegal DMA %d specified\n", 
-				dev->name, dev->dma);
+                        printk(KERN_INFO "skisa.c: Illegal DMA %d specified\n",
+				dev->dma);
 			goto out2;
 		}
 		if (request_dma(dev->dma, isa_cardname))
 		{
-                        printk(KERN_INFO "%s: Selected DMA %d not available\n", 
-				dev->name, dev->dma);
+                        printk(KERN_INFO "skisa.c: Selected DMA %d not available\n",
+				dev->dma);
 			goto out2;
 		}
 	}
 
-	printk(KERN_DEBUG "%s:    IO: %#4lx  IRQ: %d  DMA: %d\n",
-	       dev->name, dev->base_addr, dev->irq, dev->dma);
-		
 	err = register_netdev(dev);
 	if (err)
 		goto out;
 
+	printk(KERN_DEBUG "%s:    IO: %#4lx  IRQ: %d  DMA: %d\n",
+	       dev->name, dev->base_addr, dev->irq, dev->dma);
+
 	return 0;
 out:
 	free_dma(dev->dma);
@@ -275,33 +275,11 @@ out2:
 out3:
 	tmsdev_term(dev);
 out4:
-	release_region(dev->base_addr, SK_ISA_IO_EXTENT); 
+	release_region(dev->base_addr, SK_ISA_IO_EXTENT);
+out5:
 	return err;
 }
 
-struct net_device * __init sk_isa_probe(int unit)
-{
-	struct net_device *dev = alloc_trdev(sizeof(struct net_local));
-	int err = 0;
-
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	if (unit >= 0) {
-		sprintf(dev->name, "tr%d", unit);
-		netdev_boot_setup_check(dev);
-	}
-
-	err = setup_card(dev);
-	if (err)
-		goto out;
-
-	return dev;
-out:
-	free_netdev(dev);
-	return ERR_PTR(err);
-}
-
 /*
  * Reads MAC address from adapter RAM, which should've read it from
  * the onboard ROM.  
@@ -361,8 +339,6 @@ static int sk_isa_open(struct net_device *dev)
 	return tms380tr_open(dev);
 }
 
-#ifdef MODULE
-
 #define ISATR_MAX_ADAPTERS 3
 
 static int io[ISATR_MAX_ADAPTERS];
@@ -375,13 +351,23 @@ module_param_array(io, int, NULL, 0);
 module_param_array(irq, int, NULL, 0);
 module_param_array(dma, int, NULL, 0);
 
-static struct net_device *sk_isa_dev[ISATR_MAX_ADAPTERS];
+static struct platform_device *sk_isa_dev[ISATR_MAX_ADAPTERS];
 
-int init_module(void)
+static struct device_driver sk_isa_driver = {
+	.name		= "skisa",
+	.bus		= &platform_bus_type,
+};
+
+static int __init sk_isa_init(void)
 {
 	struct net_device *dev;
+	struct platform_device *pdev;
 	int i, num = 0, err = 0;
 
+	err = driver_register(&sk_isa_driver);
+	if (err)
+		return err;
+
 	for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
 		dev = alloc_trdev(sizeof(struct net_local));
 		if (!dev)
@@ -390,12 +376,15 @@ int init_module(void)
 		dev->base_addr = io[i];
 		dev->irq = irq[i];
 		dev->dma = dma[i];
-		err = setup_card(dev);
-
+		pdev = platform_device_register_simple("skisa",
+			i, NULL, 0);
+		err = setup_card(dev, &pdev->dev);
 		if (!err) {
-			sk_isa_dev[i] = dev;
+			sk_isa_dev[i] = pdev;
+			dev_set_drvdata(&sk_isa_dev[i]->dev, dev);
 			++num;
 		} else {
+			platform_device_unregister(pdev);
 			free_netdev(dev);
 		}
 	}
@@ -409,23 +398,28 @@ int init_module(void)
 	return (0);
 }
 
-void cleanup_module(void)
+static void __exit sk_isa_cleanup(void)
 {
+	struct net_device *dev;
 	int i;
 
 	for (i = 0; i < ISATR_MAX_ADAPTERS ; i++) {
-		struct net_device *dev = sk_isa_dev[i];
+		struct platform_device *pdev = sk_isa_dev[i];
 
-		if (!dev) 
+		if (!pdev)
 			continue;
-		
+		dev = dev_get_drvdata(&pdev->dev);
 		unregister_netdev(dev);
 		release_region(dev->base_addr, SK_ISA_IO_EXTENT);
 		free_irq(dev->irq, dev);
 		free_dma(dev->dma);
 		tmsdev_term(dev);
 		free_netdev(dev);
+		dev_set_drvdata(&pdev->dev, NULL);
+		platform_device_unregister(pdev);
 	}
+	driver_unregister(&sk_isa_driver);
 }
-#endif /* MODULE */
 
+module_init(sk_isa_init);
+module_exit(sk_isa_cleanup);
diff --git a/drivers/net/tokenring/tms380tr.c b/drivers/net/tokenring/tms380tr.c
index 5e0b0ce98ed..2e39bf1f746 100644
--- a/drivers/net/tokenring/tms380tr.c
+++ b/drivers/net/tokenring/tms380tr.c
@@ -62,6 +62,7 @@
  *				normal operation.
  *	30-Dec-02	JF	Removed incorrect __init from 
  *				tms380tr_init_card.
+ *	22-Jul-05	JF	Converted to dma-mapping.
  *      			
  *  To do:
  *    1. Multi/Broadcast packet handling (this may have fixed itself)
@@ -89,7 +90,7 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A
 #include <linux/time.h>
 #include <linux/errno.h>
 #include <linux/init.h>
-#include <linux/pci.h>
+#include <linux/dma-mapping.h>
 #include <linux/delay.h>
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
@@ -114,8 +115,6 @@ static const char version[] = "tms380tr.c: v1.10 30/12/2002 by Christoph Goos, A
 #endif
 static unsigned int tms380tr_debug = TMS380TR_DEBUG;
 
-static struct device tms_device;
-
 /* Index to functions, as function prototypes.
  * Alphabetical by function name.
  */
@@ -434,7 +433,7 @@ static void tms380tr_init_net_local(struct net_device *dev)
 			skb_put(tp->Rpl[i].Skb, tp->MaxPacketSize);
 
 			/* data unreachable for DMA ? then use local buffer */
-			dmabuf = pci_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE);
+			dmabuf = dma_map_single(tp->pdev, tp->Rpl[i].Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
 			if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
 			{
 				tp->Rpl[i].SkbStat = SKB_DATA_COPY;
@@ -638,10 +637,10 @@ static int tms380tr_hardware_send_packet(struct sk_buff *skb, struct net_device
 	/* Is buffer reachable for Busmaster-DMA? */
 
 	length	= skb->len;
-	dmabuf = pci_map_single(tp->pdev, skb->data, length, PCI_DMA_TODEVICE);
+	dmabuf = dma_map_single(tp->pdev, skb->data, length, DMA_TO_DEVICE);
 	if(tp->dmalimit && (dmabuf + length > tp->dmalimit)) {
 		/* Copy frame to local buffer */
-		pci_unmap_single(tp->pdev, dmabuf, length, PCI_DMA_TODEVICE);
+		dma_unmap_single(tp->pdev, dmabuf, length, DMA_TO_DEVICE);
 		dmabuf  = 0;
 		i 	= tp->TplFree->TPLIndex;
 		buf 	= tp->LocalTxBuffers[i];
@@ -1284,9 +1283,7 @@ static int tms380tr_reset_adapter(struct net_device *dev)
 	unsigned short count, c, count2;
 	const struct firmware *fw_entry = NULL;
 
-	strncpy(tms_device.bus_id,dev->name, BUS_ID_SIZE);
-
-	if (request_firmware(&fw_entry, "tms380tr.bin", &tms_device) != 0) {
+	if (request_firmware(&fw_entry, "tms380tr.bin", tp->pdev) != 0) {
 		printk(KERN_ALERT "%s: firmware %s is missing, cannot start.\n",
 			dev->name, "tms380tr.bin");
 		return (-1);
@@ -2021,7 +2018,7 @@ static void tms380tr_cancel_tx_queue(struct net_local* tp)
 
 		printk(KERN_INFO "Cancel tx (%08lXh).\n", (unsigned long)tpl);
 		if (tpl->DMABuff)
-			pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE);
+			dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_any(tpl->Skb);
 	}
 
@@ -2090,7 +2087,7 @@ static void tms380tr_tx_status_irq(struct net_device *dev)
 
 		tp->MacStat.tx_packets++;
 		if (tpl->DMABuff)
-			pci_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, PCI_DMA_TODEVICE);
+			dma_unmap_single(tp->pdev, tpl->DMABuff, tpl->Skb->len, DMA_TO_DEVICE);
 		dev_kfree_skb_irq(tpl->Skb);
 		tpl->BusyFlag = 0;	/* "free" TPL */
 	}
@@ -2209,7 +2206,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
 				tp->MacStat.rx_errors++;
 		}
 		if (rpl->DMABuff)
-			pci_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, PCI_DMA_TODEVICE);
+			dma_unmap_single(tp->pdev, rpl->DMABuff, tp->MaxPacketSize, DMA_TO_DEVICE);
 		rpl->DMABuff = 0;
 
 		/* Allocate new skb for rpl */
@@ -2227,7 +2224,7 @@ static void tms380tr_rcv_status_irq(struct net_device *dev)
 			skb_put(rpl->Skb, tp->MaxPacketSize);
 
 			/* Data unreachable for DMA ? then use local buffer */
-			dmabuf = pci_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, PCI_DMA_FROMDEVICE);
+			dmabuf = dma_map_single(tp->pdev, rpl->Skb->data, tp->MaxPacketSize, DMA_FROM_DEVICE);
 			if(tp->dmalimit && (dmabuf + tp->MaxPacketSize > tp->dmalimit))
 			{
 				rpl->SkbStat = SKB_DATA_COPY;
@@ -2332,23 +2329,26 @@ void tmsdev_term(struct net_device *dev)
 	struct net_local *tp;
 
 	tp = netdev_priv(dev);
-	pci_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
-		PCI_DMA_BIDIRECTIONAL);
+	dma_unmap_single(tp->pdev, tp->dmabuffer, sizeof(struct net_local),
+		DMA_BIDIRECTIONAL);
 }
 
-int tmsdev_init(struct net_device *dev, unsigned long dmalimit, 
-		struct pci_dev *pdev)
+int tmsdev_init(struct net_device *dev, struct device *pdev)
 {
 	struct net_local *tms_local;
 
 	memset(dev->priv, 0, sizeof(struct net_local));
 	tms_local = netdev_priv(dev);
 	init_waitqueue_head(&tms_local->wait_for_tok_int);
-	tms_local->dmalimit = dmalimit;
+	if (pdev->dma_mask)
+		tms_local->dmalimit = *pdev->dma_mask;
+	else
+		return -ENOMEM;
 	tms_local->pdev = pdev;
-	tms_local->dmabuffer = pci_map_single(pdev, (void *)tms_local,
-	    sizeof(struct net_local), PCI_DMA_BIDIRECTIONAL);
-	if (tms_local->dmabuffer + sizeof(struct net_local) > dmalimit)
+	tms_local->dmabuffer = dma_map_single(pdev, (void *)tms_local,
+	    sizeof(struct net_local), DMA_BIDIRECTIONAL);
+	if (tms_local->dmabuffer + sizeof(struct net_local) > 
+			tms_local->dmalimit)
 	{
 		printk(KERN_INFO "%s: Memory not accessible for DMA\n",
 			dev->name);
@@ -2370,8 +2370,6 @@ int tmsdev_init(struct net_device *dev, unsigned long dmalimit,
 	return 0;
 }
 
-#ifdef MODULE
-
 EXPORT_SYMBOL(tms380tr_open);
 EXPORT_SYMBOL(tms380tr_close);
 EXPORT_SYMBOL(tms380tr_interrupt);
@@ -2379,6 +2377,8 @@ EXPORT_SYMBOL(tmsdev_init);
 EXPORT_SYMBOL(tmsdev_term);
 EXPORT_SYMBOL(tms380tr_wait);
 
+#ifdef MODULE
+
 static struct module *TMS380_module = NULL;
 
 int init_module(void)
diff --git a/drivers/net/tokenring/tms380tr.h b/drivers/net/tokenring/tms380tr.h
index f2c5ba0f37a..30452c67bb6 100644
--- a/drivers/net/tokenring/tms380tr.h
+++ b/drivers/net/tokenring/tms380tr.h
@@ -17,8 +17,7 @@
 int tms380tr_open(struct net_device *dev);
 int tms380tr_close(struct net_device *dev);
 irqreturn_t tms380tr_interrupt(int irq, void *dev_id, struct pt_regs *regs);
-int tmsdev_init(struct net_device *dev, unsigned long dmalimit,
-		struct pci_dev *pdev);
+int tmsdev_init(struct net_device *dev, struct device *pdev);
 void tmsdev_term(struct net_device *dev);
 void tms380tr_wait(unsigned long time);
 
@@ -719,7 +718,7 @@ struct s_TPL {	/* Transmit Parameter List (align on even word boundaries) */
 	struct sk_buff *Skb;
 	unsigned char TPLIndex;
 	volatile unsigned char BusyFlag;/* Flag: TPL busy? */
-	dma_addr_t DMABuff;		/* DMA IO bus address from pci_map */
+	dma_addr_t DMABuff;		/* DMA IO bus address from dma_map */
 };
 
 /* ---------------------Receive Functions-------------------------------*
@@ -1060,7 +1059,7 @@ struct s_RPL {	/* Receive Parameter List */
 	struct sk_buff *Skb;
 	SKB_STAT SkbStat;
 	int RPLIndex;
-	dma_addr_t DMABuff;		/* DMA IO bus address from pci_map */
+	dma_addr_t DMABuff;		/* DMA IO bus address from dma_map */
 };
 
 /* Information that need to be kept for each board. */
@@ -1091,7 +1090,7 @@ typedef struct net_local {
 	RPL *RplTail;
 	unsigned char LocalRxBuffers[RPL_NUM][DEFAULT_PACKET_SIZE];
 
-	struct pci_dev *pdev;
+	struct device *pdev;
 	int DataRate;
 	unsigned char ScbInUse;
 	unsigned short CMDqueue;
diff --git a/drivers/net/tokenring/tmspci.c b/drivers/net/tokenring/tmspci.c
index 2e18c0a4648..ab47c0547a3 100644
--- a/drivers/net/tokenring/tmspci.c
+++ b/drivers/net/tokenring/tmspci.c
@@ -100,7 +100,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 	unsigned int pci_irq_line;
 	unsigned long pci_ioaddr;
 	struct card_info *cardinfo = &card_info_table[ent->driver_data];
-		
+
 	if (versionprinted++ == 0)
 		printk("%s", version);
 
@@ -143,7 +143,7 @@ static int __devinit tms_pci_attach(struct pci_dev *pdev, const struct pci_devic
 		printk(":%2.2x", dev->dev_addr[i]);
 	printk("\n");
 		
-	ret = tmsdev_init(dev, PCI_MAX_ADDRESS, pdev);
+	ret = tmsdev_init(dev, &pdev->dev);
 	if (ret) {
 		printk("%s: unable to get memory for dev->priv.\n", dev->name);
 		goto err_out_irq;
diff --git a/drivers/net/tulip/Kconfig b/drivers/net/tulip/Kconfig
index e2cdaf87620..8c9634a98c1 100644
--- a/drivers/net/tulip/Kconfig
+++ b/drivers/net/tulip/Kconfig
@@ -135,6 +135,18 @@ config DM9102
 	  <file:Documentation/networking/net-modules.txt>.  The module will
 	  be called dmfe.
 
+config ULI526X
+	tristate "ULi M526x controller support"
+	depends on NET_TULIP && PCI
+	select CRC32
+	---help---
+	  This driver is for ULi M5261/M5263 10/100M Ethernet Controller
+	  (<http://www.uli.com.tw/>).
+
+	  To compile this driver as a module, choose M here and read
+	  <file:Documentation/networking/net-modules.txt>.  The module will
+	  be called uli526x.
+	  
 config PCMCIA_XIRCOM
 	tristate "Xircom CardBus support (new driver)"
 	depends on NET_TULIP && CARDBUS
diff --git a/drivers/net/tulip/Makefile b/drivers/net/tulip/Makefile
index 8bb9b468397..451090d6fcc 100644
--- a/drivers/net/tulip/Makefile
+++ b/drivers/net/tulip/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_WINBOND_840)	+= winbond-840.o
 obj-$(CONFIG_DE2104X)		+= de2104x.o
 obj-$(CONFIG_TULIP)		+= tulip.o
 obj-$(CONFIG_DE4X5)		+= de4x5.o
+obj-$(CONFIG_ULI526X)		+= uli526x.o
 
 # Declare multi-part drivers.
 
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index e26c31f944b..f53396fe79c 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -81,25 +81,6 @@ int tulip_mdio_read(struct net_device *dev, int phy_id, int location)
 		return retval & 0xffff;
 	}
 
-	if(tp->chip_id == ULI526X && tp->revision >= 0x40) {
-		int value;
-		int i = 1000;
-		
-		value = ioread32(ioaddr + CSR9);
-		iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-		
-		value = (phy_id << 21) | (location << 16) | 0x08000000;
-		iowrite32(value, ioaddr + CSR10);
-		
-		while(--i > 0) {
-			mdio_delay();
-			if(ioread32(ioaddr + CSR10) & 0x10000000)
-				break;
-		}
-		retval = ioread32(ioaddr + CSR10);
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return retval & 0xFFFF;
-	}
 	/* Establish sync by sending at least 32 logic ones. */
 	for (i = 32; i >= 0; i--) {
 		iowrite32(MDIO_ENB | MDIO_DATA_WRITE1, mdio_addr);
@@ -159,23 +140,6 @@ void tulip_mdio_write(struct net_device *dev, int phy_id, int location, int val)
 		spin_unlock_irqrestore(&tp->mii_lock, flags);
 		return;
 	}
-	if (tp->chip_id == ULI526X && tp->revision >= 0x40) {
-		int value;
-		int i = 1000;
-		
-		value = ioread32(ioaddr + CSR9);
-		iowrite32(value & 0xFFEFFFFF, ioaddr + CSR9);
-		
-		value = (phy_id << 21) | (location << 16) | 0x04000000 | (val & 0xFFFF);
-		iowrite32(value, ioaddr + CSR10);
-		
-		while(--i > 0) {
-			if (ioread32(ioaddr + CSR10) & 0x10000000)
-				break;
-		}
-		spin_unlock_irqrestore(&tp->mii_lock, flags);
-		return;
-	}
 		
 	/* Establish sync by sending 32 logic ones. */
 	for (i = 32; i >= 0; i--) {
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c
index 69156828355..e058a9fbfe8 100644
--- a/drivers/net/tulip/timer.c
+++ b/drivers/net/tulip/timer.c
@@ -39,7 +39,6 @@ void tulip_timer(unsigned long data)
 	case MX98713:
 	case COMPEX9881:
 	case DM910X:
-	case ULI526X:
 	default: {
 		struct medialeaf *mleaf;
 		unsigned char *p;
diff --git a/drivers/net/tulip/tulip.h b/drivers/net/tulip/tulip.h
index 20346d847d9..05d2d96f7be 100644
--- a/drivers/net/tulip/tulip.h
+++ b/drivers/net/tulip/tulip.h
@@ -88,7 +88,6 @@ enum chips {
 	I21145,
 	DM910X,
 	CONEXANT,
-	ULI526X
 };
 
 
@@ -482,11 +481,8 @@ static inline void tulip_stop_rxtx(struct tulip_private *tp)
 
 static inline void tulip_restart_rxtx(struct tulip_private *tp)
 {
-	if(!(tp->chip_id == ULI526X && 
-		(tp->revision == 0x40 || tp->revision == 0x50))) {
-		tulip_stop_rxtx(tp);
-		udelay(5);
-	}
+	tulip_stop_rxtx(tp);
+	udelay(5);
 	tulip_start_rxtx(tp);
 }
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index d45d8f56e5b..05da5bea564 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -199,9 +199,6 @@ struct tulip_chip_table tulip_tbl[] = {
   { "Conexant LANfinity", 256, 0x0001ebef,
 	HAS_MII | HAS_ACPI, tulip_timer },
 
-   /* ULi526X */
-   { "ULi M5261/M5263", 128, 0x0001ebef,
-        HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer },
 };
 
 
@@ -239,8 +236,6 @@ static struct pci_device_id tulip_pci_tbl[] = {
 	{ 0x1737, 0xAB09, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x1737, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
 	{ 0x17B3, 0xAB08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET },
- 	{ 0x10b9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X },	/* ALi 1563 integrated ethernet */
- 	{ 0x10b9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ULI526X },	/* ALi 1563 integrated ethernet */
 	{ 0x10b7, 0x9300, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* 3Com 3CSOHO100B-TX */
 	{ 0x14ea, 0xab08, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, /* Planex FNW-3602-TX */
 	{ } /* terminate list */
@@ -522,7 +517,7 @@ static void tulip_tx_timeout(struct net_device *dev)
 				   dev->name);
 	} else if (tp->chip_id == DC21140 || tp->chip_id == DC21142
 			   || tp->chip_id == MX98713 || tp->chip_id == COMPEX9881
-			   || tp->chip_id == DM910X || tp->chip_id == ULI526X) {
+			   || tp->chip_id == DM910X) {
 		printk(KERN_WARNING "%s: 21140 transmit timed out, status %8.8x, "
 			   "SIA %8.8x %8.8x %8.8x %8.8x, resetting...\n",
 			   dev->name, ioread32(ioaddr + CSR5), ioread32(ioaddr + CSR12),
@@ -1103,18 +1098,16 @@ static void set_rx_mode(struct net_device *dev)
 			entry = tp->cur_tx++ % TX_RING_SIZE;
 
 			if (entry != 0) {
-				/* Avoid a chip errata by prefixing a dummy entry. Don't do
-				   this on the ULI526X as it triggers a different problem */
-				if (!(tp->chip_id == ULI526X && (tp->revision == 0x40 || tp->revision == 0x50))) {
-					tp->tx_buffers[entry].skb = NULL;
-					tp->tx_buffers[entry].mapping = 0;
-					tp->tx_ring[entry].length =
-						(entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
-					tp->tx_ring[entry].buffer1 = 0;
-					/* Must set DescOwned later to avoid race with chip */
-					dummy = entry;
-					entry = tp->cur_tx++ % TX_RING_SIZE;
-				}
+				/* Avoid a chip errata by prefixing a dummy entry. */
+				tp->tx_buffers[entry].skb = NULL;
+				tp->tx_buffers[entry].mapping = 0;
+				tp->tx_ring[entry].length =
+					(entry == TX_RING_SIZE-1) ? cpu_to_le32(DESC_RING_WRAP) : 0;
+				tp->tx_ring[entry].buffer1 = 0;
+				/* Must set DescOwned later to avoid race with chip */
+				dummy = entry;
+				entry = tp->cur_tx++ % TX_RING_SIZE;
+
 			}
 
 			tp->tx_buffers[entry].skb = NULL;
@@ -1235,10 +1228,6 @@ static int tulip_uli_dm_quirk(struct pci_dev *pdev)
 {
 	if (pdev->vendor == 0x1282 && pdev->device == 0x9102)
 		return 1;
-	if (pdev->vendor == 0x10b9 && pdev->device == 0x5261)
-		return 1;
-	if (pdev->vendor == 0x10b9 && pdev->device == 0x5263)
-		return 1;
 	return 0;
 }
 
@@ -1680,7 +1669,6 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
 	switch (chip_idx) {
 	case DC21140:
 	case DM910X:
-	case ULI526X:
 	default:
 		if (tp->mtable)
 			iowrite32(tp->mtable->csr12dir | 0x100, ioaddr + CSR12);
diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c
new file mode 100644
index 00000000000..5ae22b7bc5c
--- /dev/null
+++ b/drivers/net/tulip/uli526x.c
@@ -0,0 +1,1749 @@
+/*
+    This program is free software; you can redistribute it and/or
+    modify it under the terms of the GNU General Public License
+    as published by the Free Software Foundation; either version 2
+    of the License, or (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    
+*/
+
+#define DRV_NAME	"uli526x"
+#define DRV_VERSION	"0.9.3"
+#define DRV_RELDATE	"2005-7-29"
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ptrace.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+
+#include <asm/processor.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+
+/* Board/System/Debug information/definition ---------------- */
+#define PCI_ULI5261_ID  0x526110B9	/* ULi M5261 ID*/
+#define PCI_ULI5263_ID  0x526310B9	/* ULi M5263 ID*/
+
+#define ULI526X_IO_SIZE 0x100
+#define TX_DESC_CNT     0x20            /* Allocated Tx descriptors */
+#define RX_DESC_CNT     0x30            /* Allocated Rx descriptors */
+#define TX_FREE_DESC_CNT (TX_DESC_CNT - 2)	/* Max TX packet count */
+#define TX_WAKE_DESC_CNT (TX_DESC_CNT - 3)	/* TX wakeup count */
+#define DESC_ALL_CNT    (TX_DESC_CNT + RX_DESC_CNT)
+#define TX_BUF_ALLOC    0x600
+#define RX_ALLOC_SIZE   0x620
+#define ULI526X_RESET    1
+#define CR0_DEFAULT     0
+#define CR6_DEFAULT     0x22200000
+#define CR7_DEFAULT     0x180c1
+#define CR15_DEFAULT    0x06            /* TxJabber RxWatchdog */
+#define TDES0_ERR_MASK  0x4302          /* TXJT, LC, EC, FUE */
+#define MAX_PACKET_SIZE 1514
+#define ULI5261_MAX_MULTICAST 14
+#define RX_COPY_SIZE	100
+#define MAX_CHECK_PACKET 0x8000
+
+#define ULI526X_10MHF      0
+#define ULI526X_100MHF     1
+#define ULI526X_10MFD      4
+#define ULI526X_100MFD     5
+#define ULI526X_AUTO       8
+
+#define ULI526X_TXTH_72	0x400000	/* TX TH 72 byte */
+#define ULI526X_TXTH_96	0x404000	/* TX TH 96 byte */
+#define ULI526X_TXTH_128	0x0000		/* TX TH 128 byte */
+#define ULI526X_TXTH_256	0x4000		/* TX TH 256 byte */
+#define ULI526X_TXTH_512	0x8000		/* TX TH 512 byte */
+#define ULI526X_TXTH_1K	0xC000		/* TX TH 1K  byte */
+
+#define ULI526X_TIMER_WUT  (jiffies + HZ * 1)/* timer wakeup time : 1 second */
+#define ULI526X_TX_TIMEOUT ((16*HZ)/2)	/* tx packet time-out time 8 s" */
+#define ULI526X_TX_KICK 	(4*HZ/2)	/* tx packet Kick-out time 2 s" */
+
+#define ULI526X_DBUG(dbug_now, msg, value) if (uli526x_debug || (dbug_now)) printk(KERN_ERR DRV_NAME ": %s %lx\n", (msg), (long) (value))
+
+#define SHOW_MEDIA_TYPE(mode) printk(KERN_ERR DRV_NAME ": Change Speed to %sMhz %s duplex\n",mode & 1 ?"100":"10", mode & 4 ? "full":"half");
+
+
+/* CR9 definition: SROM/MII */
+#define CR9_SROM_READ   0x4800
+#define CR9_SRCS        0x1
+#define CR9_SRCLK       0x2
+#define CR9_CRDOUT      0x8
+#define SROM_DATA_0     0x0
+#define SROM_DATA_1     0x4
+#define PHY_DATA_1      0x20000
+#define PHY_DATA_0      0x00000
+#define MDCLKH          0x10000
+
+#define PHY_POWER_DOWN	0x800
+
+#define SROM_V41_CODE   0x14
+
+#define SROM_CLK_WRITE(data, ioaddr)					\
+		outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);		\
+		udelay(5);						\
+		outl(data|CR9_SROM_READ|CR9_SRCS|CR9_SRCLK,ioaddr);	\
+		udelay(5);						\
+		outl(data|CR9_SROM_READ|CR9_SRCS,ioaddr);		\
+		udelay(5);
+
+/* Structure/enum declaration ------------------------------- */
+struct tx_desc {
+        u32 tdes0, tdes1, tdes2, tdes3; /* Data for the card */
+        char *tx_buf_ptr;               /* Data for us */
+        struct tx_desc *next_tx_desc;
+} __attribute__(( aligned(32) ));
+
+struct rx_desc {
+	u32 rdes0, rdes1, rdes2, rdes3; /* Data for the card */
+	struct sk_buff *rx_skb_ptr;	/* Data for us */
+	struct rx_desc *next_rx_desc;
+} __attribute__(( aligned(32) ));
+
+struct uli526x_board_info {
+	u32 chip_id;			/* Chip vendor/Device ID */
+	struct net_device *next_dev;	/* next device */
+	struct pci_dev *pdev;		/* PCI device */
+	spinlock_t lock;
+
+	long ioaddr;			/* I/O base address */
+	u32 cr0_data;
+	u32 cr5_data;
+	u32 cr6_data;
+	u32 cr7_data;
+	u32 cr15_data;
+
+	/* pointer for memory physical address */
+	dma_addr_t buf_pool_dma_ptr;	/* Tx buffer pool memory */
+	dma_addr_t buf_pool_dma_start;	/* Tx buffer pool align dword */
+	dma_addr_t desc_pool_dma_ptr;	/* descriptor pool memory */
+	dma_addr_t first_tx_desc_dma;
+	dma_addr_t first_rx_desc_dma;
+
+	/* descriptor pointer */
+	unsigned char *buf_pool_ptr;	/* Tx buffer pool memory */
+	unsigned char *buf_pool_start;	/* Tx buffer pool align dword */
+	unsigned char *desc_pool_ptr;	/* descriptor pool memory */
+	struct tx_desc *first_tx_desc;
+	struct tx_desc *tx_insert_ptr;
+	struct tx_desc *tx_remove_ptr;
+	struct rx_desc *first_rx_desc;
+	struct rx_desc *rx_insert_ptr;
+	struct rx_desc *rx_ready_ptr;	/* packet come pointer */
+	unsigned long tx_packet_cnt;	/* transmitted packet count */
+	unsigned long rx_avail_cnt;	/* available rx descriptor count */
+	unsigned long interval_rx_cnt;	/* rx packet count a callback time */
+
+	u16 dbug_cnt;
+	u16 NIC_capability;		/* NIC media capability */
+	u16 PHY_reg4;			/* Saved Phyxcer register 4 value */
+
+	u8 media_mode;			/* user specify media mode */
+	u8 op_mode;			/* real work media mode */
+	u8 phy_addr;
+	u8 link_failed;			/* Ever link failed */
+	u8 wait_reset;			/* Hardware failed, need to reset */
+	struct timer_list timer;
+
+	/* System defined statistic counter */
+	struct net_device_stats stats;
+
+	/* Driver defined statistic counter */
+	unsigned long tx_fifo_underrun;
+	unsigned long tx_loss_carrier;
+	unsigned long tx_no_carrier;
+	unsigned long tx_late_collision;
+	unsigned long tx_excessive_collision;
+	unsigned long tx_jabber_timeout;
+	unsigned long reset_count;
+	unsigned long reset_cr8;
+	unsigned long reset_fatal;
+	unsigned long reset_TXtimeout;
+
+	/* NIC SROM data */
+	unsigned char srom[128];
+	u8 init;	
+};
+
+enum uli526x_offsets {
+	DCR0 = 0x00, DCR1 = 0x08, DCR2 = 0x10, DCR3 = 0x18, DCR4 = 0x20,
+	DCR5 = 0x28, DCR6 = 0x30, DCR7 = 0x38, DCR8 = 0x40, DCR9 = 0x48,
+	DCR10 = 0x50, DCR11 = 0x58, DCR12 = 0x60, DCR13 = 0x68, DCR14 = 0x70,
+	DCR15 = 0x78
+};
+
+enum uli526x_CR6_bits {
+	CR6_RXSC = 0x2, CR6_PBF = 0x8, CR6_PM = 0x40, CR6_PAM = 0x80,
+	CR6_FDM = 0x200, CR6_TXSC = 0x2000, CR6_STI = 0x100000,
+	CR6_SFT = 0x200000, CR6_RXA = 0x40000000, CR6_NO_PURGE = 0x20000000
+};
+
+/* Global variable declaration ----------------------------- */
+static int __devinitdata printed_version;
+static char version[] __devinitdata =
+	KERN_INFO DRV_NAME ": ULi M5261/M5263 net driver, version "
+	DRV_VERSION " (" DRV_RELDATE ")\n";
+
+static int uli526x_debug;
+static unsigned char uli526x_media_mode = ULI526X_AUTO;
+static u32 uli526x_cr6_user_set;
+
+/* For module input parameter */
+static int debug;
+static u32 cr6set;
+static unsigned char mode = 8;
+
+/* function declaration ------------------------------------- */
+static int uli526x_open(struct net_device *);
+static int uli526x_start_xmit(struct sk_buff *, struct net_device *);
+static int uli526x_stop(struct net_device *);
+static struct net_device_stats * uli526x_get_stats(struct net_device *);
+static void uli526x_set_filter_mode(struct net_device *);
+static struct ethtool_ops netdev_ethtool_ops;
+static u16 read_srom_word(long, int);
+static irqreturn_t uli526x_interrupt(int, void *, struct pt_regs *);
+static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long);
+static void allocate_rx_buffer(struct uli526x_board_info *);
+static void update_cr6(u32, unsigned long);
+static void send_filter_frame(struct net_device *, int);
+static u16 phy_read(unsigned long, u8, u8, u32);
+static u16 phy_readby_cr10(unsigned long, u8, u8);
+static void phy_write(unsigned long, u8, u8, u16, u32);
+static void phy_writeby_cr10(unsigned long, u8, u8, u16);
+static void phy_write_1bit(unsigned long, u32, u32);
+static u16 phy_read_1bit(unsigned long, u32);
+static u8 uli526x_sense_speed(struct uli526x_board_info *);
+static void uli526x_process_mode(struct uli526x_board_info *);
+static void uli526x_timer(unsigned long);
+static void uli526x_rx_packet(struct net_device *, struct uli526x_board_info *);
+static void uli526x_free_tx_pkt(struct net_device *, struct uli526x_board_info *);
+static void uli526x_reuse_skb(struct uli526x_board_info *, struct sk_buff *);
+static void uli526x_dynamic_reset(struct net_device *);
+static void uli526x_free_rxbuffer(struct uli526x_board_info *);
+static void uli526x_init(struct net_device *);
+static void uli526x_set_phyxcer(struct uli526x_board_info *);
+
+/* ULI526X network board routine ---------------------------- */
+
+/*
+ *	Search ULI526X board, allocate space and register it
+ */
+
+static int __devinit uli526x_init_one (struct pci_dev *pdev,
+				    const struct pci_device_id *ent)
+{
+	struct uli526x_board_info *db;	/* board information structure */
+	struct net_device *dev;
+	int i, err;
+	
+	ULI526X_DBUG(0, "uli526x_init_one()", 0);
+
+	if (!printed_version++)
+		printk(version);
+
+	/* Init network device */
+	dev = alloc_etherdev(sizeof(*db));
+	if (dev == NULL)
+		return -ENOMEM;
+	SET_MODULE_OWNER(dev);
+	SET_NETDEV_DEV(dev, &pdev->dev);
+
+	if (pci_set_dma_mask(pdev, DMA_32BIT_MASK)) {
+		printk(KERN_WARNING DRV_NAME ": 32-bit PCI DMA not available.\n");
+		err = -ENODEV;
+		goto err_out_free;
+	}
+
+	/* Enable Master/IO access, Disable memory access */
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_out_free;
+
+	if (!pci_resource_start(pdev, 0)) {
+		printk(KERN_ERR DRV_NAME ": I/O base is zero\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (pci_resource_len(pdev, 0) < (ULI526X_IO_SIZE) ) {
+		printk(KERN_ERR DRV_NAME ": Allocated I/O size too small\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	if (pci_request_regions(pdev, DRV_NAME)) {
+		printk(KERN_ERR DRV_NAME ": Failed to request PCI regions\n");
+		err = -ENODEV;
+		goto err_out_disable;
+	}
+
+	/* Init system & device */
+	db = netdev_priv(dev);
+
+	/* Allocate Tx/Rx descriptor memory */
+	db->desc_pool_ptr = pci_alloc_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20, &db->desc_pool_dma_ptr);
+	if(db->desc_pool_ptr == NULL)
+	{
+		err = -ENOMEM;
+		goto err_out_nomem;
+	}
+	db->buf_pool_ptr = pci_alloc_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4, &db->buf_pool_dma_ptr);
+	if(db->buf_pool_ptr == NULL)
+	{
+		err = -ENOMEM;
+		goto err_out_nomem;
+	}
+	
+	db->first_tx_desc = (struct tx_desc *) db->desc_pool_ptr;
+	db->first_tx_desc_dma = db->desc_pool_dma_ptr;
+	db->buf_pool_start = db->buf_pool_ptr;
+	db->buf_pool_dma_start = db->buf_pool_dma_ptr;
+
+	db->chip_id = ent->driver_data;
+	db->ioaddr = pci_resource_start(pdev, 0);
+	
+	db->pdev = pdev;
+	db->init = 1;
+	
+	dev->base_addr = db->ioaddr;
+	dev->irq = pdev->irq;
+	pci_set_drvdata(pdev, dev);
+	
+	/* Register some necessary functions */
+	dev->open = &uli526x_open;
+	dev->hard_start_xmit = &uli526x_start_xmit;
+	dev->stop = &uli526x_stop;
+	dev->get_stats = &uli526x_get_stats;
+	dev->set_multicast_list = &uli526x_set_filter_mode;
+	dev->ethtool_ops = &netdev_ethtool_ops;
+	spin_lock_init(&db->lock);
+
+		
+	/* read 64 word srom data */
+	for (i = 0; i < 64; i++)
+		((u16 *) db->srom)[i] = cpu_to_le16(read_srom_word(db->ioaddr, i));
+
+	/* Set Node address */
+	if(((u16 *) db->srom)[0] == 0xffff || ((u16 *) db->srom)[0] == 0)		/* SROM absent, so read MAC address from ID Table */
+	{
+		outl(0x10000, db->ioaddr + DCR0);	//Diagnosis mode
+		outl(0x1c0, db->ioaddr + DCR13);	//Reset dianostic pointer port
+		outl(0, db->ioaddr + DCR14);		//Clear reset port
+		outl(0x10, db->ioaddr + DCR14);		//Reset ID Table pointer
+		outl(0, db->ioaddr + DCR14);		//Clear reset port
+		outl(0, db->ioaddr + DCR13);		//Clear CR13
+		outl(0x1b0, db->ioaddr + DCR13);	//Select ID Table access port
+		//Read MAC address from CR14
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = inl(db->ioaddr + DCR14);
+		//Read end
+		outl(0, db->ioaddr + DCR13);	//Clear CR13
+		outl(0, db->ioaddr + DCR0);		//Clear CR0
+		udelay(10);
+	}
+	else		/*Exist SROM*/
+	{
+		for (i = 0; i < 6; i++)
+			dev->dev_addr[i] = db->srom[20 + i];
+	}
+	err = register_netdev (dev);
+	if (err)
+		goto err_out_res;
+
+	printk(KERN_INFO "%s: ULi M%04lx at pci%s,",dev->name,ent->driver_data >> 16,pci_name(pdev));
+	
+	for (i = 0; i < 6; i++)
+		printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+	printk(", irq %d.\n", dev->irq);
+
+	pci_set_master(pdev);
+
+	return 0;
+
+err_out_res:
+	pci_release_regions(pdev);
+err_out_nomem:
+	if(db->desc_pool_ptr)
+		pci_free_consistent(pdev, sizeof(struct tx_desc) * DESC_ALL_CNT + 0x20,
+			db->desc_pool_ptr, db->desc_pool_dma_ptr);
+			
+	if(db->buf_pool_ptr != NULL)
+		pci_free_consistent(pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+			db->buf_pool_ptr, db->buf_pool_dma_ptr);
+err_out_disable:
+	pci_disable_device(pdev);
+err_out_free:
+	pci_set_drvdata(pdev, NULL);
+	free_netdev(dev);
+
+	return err;
+}
+
+
+static void __devexit uli526x_remove_one (struct pci_dev *pdev)
+{
+	struct net_device *dev = pci_get_drvdata(pdev);
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_remove_one()", 0);
+
+	pci_free_consistent(db->pdev, sizeof(struct tx_desc) *
+				DESC_ALL_CNT + 0x20, db->desc_pool_ptr,
+ 				db->desc_pool_dma_ptr);
+	pci_free_consistent(db->pdev, TX_BUF_ALLOC * TX_DESC_CNT + 4,
+				db->buf_pool_ptr, db->buf_pool_dma_ptr);
+	unregister_netdev(dev);
+	pci_release_regions(pdev);
+	free_netdev(dev);	/* free board information */
+	pci_set_drvdata(pdev, NULL);
+	pci_disable_device(pdev);
+	ULI526X_DBUG(0, "uli526x_remove_one() exit", 0);
+}
+
+
+/*
+ *	Open the interface.
+ *	The interface is opened whenever "ifconfig" activates it.
+ */
+
+static int uli526x_open(struct net_device *dev)
+{
+	int ret;
+	struct uli526x_board_info *db = netdev_priv(dev);
+	
+	ULI526X_DBUG(0, "uli526x_open", 0);
+
+	ret = request_irq(dev->irq, &uli526x_interrupt, SA_SHIRQ, dev->name, dev);
+	if (ret)
+		return ret;
+
+	/* system variable init */
+	db->cr6_data = CR6_DEFAULT | uli526x_cr6_user_set;
+	db->tx_packet_cnt = 0;
+	db->rx_avail_cnt = 0;
+	db->link_failed = 1;
+	netif_carrier_off(dev);
+	db->wait_reset = 0;
+
+	db->NIC_capability = 0xf;	/* All capability*/
+	db->PHY_reg4 = 0x1e0;
+
+	/* CR6 operation mode decision */
+	db->cr6_data |= ULI526X_TXTH_256;
+	db->cr0_data = CR0_DEFAULT;
+	
+	/* Initialize ULI526X board */
+	uli526x_init(dev);
+
+	/* Active System Interface */
+	netif_wake_queue(dev);
+
+	/* set and active a timer process */
+	init_timer(&db->timer);
+	db->timer.expires = ULI526X_TIMER_WUT + HZ * 2;
+	db->timer.data = (unsigned long)dev;
+	db->timer.function = &uli526x_timer;
+	add_timer(&db->timer);
+
+	return 0;
+}
+
+
+/*	Initialize ULI526X board
+ *	Reset ULI526X board
+ *	Initialize TX/Rx descriptor chain structure
+ *	Send the set-up frame
+ *	Enable Tx/Rx machine
+ */
+
+static void uli526x_init(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = db->ioaddr;
+	u8	phy_tmp;
+	u16	phy_value;
+	u16 phy_reg_reset;
+
+	ULI526X_DBUG(0, "uli526x_init()", 0);
+
+	/* Reset M526x MAC controller */
+	outl(ULI526X_RESET, ioaddr + DCR0);	/* RESET MAC */
+	udelay(100);
+	outl(db->cr0_data, ioaddr + DCR0);
+	udelay(5);
+
+	/* Phy addr : In some boards,M5261/M5263 phy address != 1 */
+	db->phy_addr = 1;
+	for(phy_tmp=0;phy_tmp<32;phy_tmp++)
+	{
+		phy_value=phy_read(db->ioaddr,phy_tmp,3,db->chip_id);//peer add
+		if(phy_value != 0xffff&&phy_value!=0)
+		{
+			db->phy_addr = phy_tmp;
+			break;
+		}
+	}
+	if(phy_tmp == 32)
+		printk(KERN_WARNING "Can not find the phy address!!!");
+	/* Parser SROM and media mode */
+	db->media_mode = uli526x_media_mode;
+
+	/* Phyxcer capability setting */
+	phy_reg_reset = phy_read(db->ioaddr, db->phy_addr, 0, db->chip_id);
+	phy_reg_reset = (phy_reg_reset | 0x8000);
+	phy_write(db->ioaddr, db->phy_addr, 0, phy_reg_reset, db->chip_id);
+	udelay(500);
+
+	/* Process Phyxcer Media Mode */
+	uli526x_set_phyxcer(db);
+
+	/* Media Mode Process */
+	if ( !(db->media_mode & ULI526X_AUTO) )
+		db->op_mode = db->media_mode; 	/* Force Mode */
+
+	/* Initialize Transmit/Receive decriptor and CR3/4 */
+	uli526x_descriptor_init(db, ioaddr);
+
+	/* Init CR6 to program M526X operation */
+	update_cr6(db->cr6_data, ioaddr);
+
+	/* Send setup frame */
+	send_filter_frame(dev, dev->mc_count);	/* M5261/M5263 */
+
+	/* Init CR7, interrupt active bit */
+	db->cr7_data = CR7_DEFAULT;
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	/* Init CR15, Tx jabber and Rx watchdog timer */
+	outl(db->cr15_data, ioaddr + DCR15);
+
+	/* Enable ULI526X Tx/Rx function */
+	db->cr6_data |= CR6_RXSC | CR6_TXSC;
+	update_cr6(db->cr6_data, ioaddr);
+}
+
+
+/*
+ *	Hardware start transmission.
+ *	Send a packet to media from the upper layer.
+ */
+
+static int uli526x_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	struct tx_desc *txptr;
+	unsigned long flags;
+
+	ULI526X_DBUG(0, "uli526x_start_xmit", 0);
+
+	/* Resource flag check */
+	netif_stop_queue(dev);
+
+	/* Too large packet check */
+	if (skb->len > MAX_PACKET_SIZE) {
+		printk(KERN_ERR DRV_NAME ": big packet = %d\n", (u16)skb->len);
+		dev_kfree_skb(skb);
+		return 0;
+	}
+
+	spin_lock_irqsave(&db->lock, flags);
+
+	/* No Tx resource check, it never happen nromally */
+	if (db->tx_packet_cnt >= TX_FREE_DESC_CNT) {
+		spin_unlock_irqrestore(&db->lock, flags);
+		printk(KERN_ERR DRV_NAME ": No Tx resource %ld\n", db->tx_packet_cnt);
+		return 1;
+	}
+
+	/* Disable NIC interrupt */
+	outl(0, dev->base_addr + DCR7);
+
+	/* transmit this packet */
+	txptr = db->tx_insert_ptr;
+	memcpy(txptr->tx_buf_ptr, skb->data, skb->len);
+	txptr->tdes1 = cpu_to_le32(0xe1000000 | skb->len);
+
+	/* Point to next transmit free descriptor */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+
+	/* Transmit Packet Process */
+	if ( (db->tx_packet_cnt < TX_DESC_CNT) ) {
+		txptr->tdes0 = cpu_to_le32(0x80000000);	/* Set owner bit */
+		db->tx_packet_cnt++;			/* Ready to send */
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		dev->trans_start = jiffies;		/* saved time stamp */
+	}
+
+	/* Tx resource check */
+	if ( db->tx_packet_cnt < TX_FREE_DESC_CNT )
+		netif_wake_queue(dev);
+
+	/* Restore CR7 to enable interrupt */
+	spin_unlock_irqrestore(&db->lock, flags);
+	outl(db->cr7_data, dev->base_addr + DCR7);
+	
+	/* free this SKB */
+	dev_kfree_skb(skb);
+
+	return 0;
+}
+
+
+/*
+ *	Stop the interface.
+ *	The interface is stopped when it is brought.
+ */
+
+static int uli526x_stop(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+
+	ULI526X_DBUG(0, "uli526x_stop", 0);
+
+	/* disable system */
+	netif_stop_queue(dev);
+
+	/* deleted timer */
+	del_timer_sync(&db->timer);
+
+	/* Reset & stop ULI526X board */
+	outl(ULI526X_RESET, ioaddr + DCR0);
+	udelay(5);
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x8000, db->chip_id);
+
+	/* free interrupt */
+	free_irq(dev->irq, dev);
+
+	/* free allocated rx buffer */
+	uli526x_free_rxbuffer(db);
+
+#if 0
+	/* show statistic counter */
+	printk(DRV_NAME ": FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
+		db->tx_fifo_underrun, db->tx_excessive_collision,
+		db->tx_late_collision, db->tx_no_carrier, db->tx_loss_carrier,
+		db->tx_jabber_timeout, db->reset_count, db->reset_cr8,
+		db->reset_fatal, db->reset_TXtimeout);
+#endif
+
+	return 0;
+}
+
+
+/*
+ *	M5261/M5263 insterrupt handler
+ *	receive the packet to upper layer, free the transmitted packet
+ */
+
+static irqreturn_t uli526x_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+	struct net_device *dev = dev_id;
+	struct uli526x_board_info *db = netdev_priv(dev);
+	unsigned long ioaddr = dev->base_addr;
+	unsigned long flags;
+
+	if (!dev) {
+		ULI526X_DBUG(1, "uli526x_interrupt() without DEVICE arg", 0);
+		return IRQ_NONE;
+	}
+
+	spin_lock_irqsave(&db->lock, flags);
+	outl(0, ioaddr + DCR7);
+
+	/* Got ULI526X status */
+	db->cr5_data = inl(ioaddr + DCR5);
+	outl(db->cr5_data, ioaddr + DCR5);
+	if ( !(db->cr5_data & 0x180c1) ) {
+		spin_unlock_irqrestore(&db->lock, flags);
+		outl(db->cr7_data, ioaddr + DCR7);
+		return IRQ_HANDLED;
+	}
+
+	/* Check system status */
+	if (db->cr5_data & 0x2000) {
+		/* system bus error happen */
+		ULI526X_DBUG(1, "System bus error happen. CR5=", db->cr5_data);
+		db->reset_fatal++;
+		db->wait_reset = 1;	/* Need to RESET */
+		spin_unlock_irqrestore(&db->lock, flags);
+		return IRQ_HANDLED;
+	}
+
+	 /* Received the coming packet */
+	if ( (db->cr5_data & 0x40) && db->rx_avail_cnt )
+		uli526x_rx_packet(dev, db);
+
+	/* reallocate rx descriptor buffer */
+	if (db->rx_avail_cnt<RX_DESC_CNT)
+		allocate_rx_buffer(db);
+
+	/* Free the transmitted descriptor */
+	if ( db->cr5_data & 0x01)
+		uli526x_free_tx_pkt(dev, db);
+
+	/* Restore CR7 to enable interrupt mask */
+	outl(db->cr7_data, ioaddr + DCR7);
+
+	spin_unlock_irqrestore(&db->lock, flags);
+	return IRQ_HANDLED;
+}
+
+
+/*
+ *	Free TX resource after TX complete
+ */
+
+static void uli526x_free_tx_pkt(struct net_device *dev, struct uli526x_board_info * db)
+{
+	struct tx_desc *txptr;
+	u32 tdes0;
+
+	txptr = db->tx_remove_ptr;
+	while(db->tx_packet_cnt) {
+		tdes0 = le32_to_cpu(txptr->tdes0);
+		/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+		if (tdes0 & 0x80000000)
+			break;
+
+		/* A packet sent completed */
+		db->tx_packet_cnt--;
+		db->stats.tx_packets++;
+
+		/* Transmit statistic counter */
+		if ( tdes0 != 0x7fffffff ) {
+			/* printk(DRV_NAME ": tdes0=%x\n", tdes0); */
+			db->stats.collisions += (tdes0 >> 3) & 0xf;
+			db->stats.tx_bytes += le32_to_cpu(txptr->tdes1) & 0x7ff;
+			if (tdes0 & TDES0_ERR_MASK) {
+				db->stats.tx_errors++;
+				if (tdes0 & 0x0002) {	/* UnderRun */
+					db->tx_fifo_underrun++;
+					if ( !(db->cr6_data & CR6_SFT) ) {
+						db->cr6_data = db->cr6_data | CR6_SFT;
+						update_cr6(db->cr6_data, db->ioaddr);
+					}
+				}
+				if (tdes0 & 0x0100)
+					db->tx_excessive_collision++;
+				if (tdes0 & 0x0200)
+					db->tx_late_collision++;
+				if (tdes0 & 0x0400)
+					db->tx_no_carrier++;
+				if (tdes0 & 0x0800)
+					db->tx_loss_carrier++;
+				if (tdes0 & 0x4000)
+					db->tx_jabber_timeout++;
+			}
+		}
+
+    		txptr = txptr->next_tx_desc;
+	}/* End of while */
+
+	/* Update TX remove pointer to next */
+	db->tx_remove_ptr = txptr;
+
+	/* Resource available check */
+	if ( db->tx_packet_cnt < TX_WAKE_DESC_CNT )
+		netif_wake_queue(dev);	/* Active upper layer, send again */
+}
+
+
+/*
+ *	Receive the come packet and pass to upper layer
+ */
+
+static void uli526x_rx_packet(struct net_device *dev, struct uli526x_board_info * db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb;
+	int rxlen;
+	u32 rdes0;
+	
+	rxptr = db->rx_ready_ptr;
+
+	while(db->rx_avail_cnt) {
+		rdes0 = le32_to_cpu(rxptr->rdes0);
+		if (rdes0 & 0x80000000)	/* packet owner check */
+		{
+			break;
+		}
+
+		db->rx_avail_cnt--;
+		db->interval_rx_cnt++;
+
+		pci_unmap_single(db->pdev, le32_to_cpu(rxptr->rdes2), RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE);
+		if ( (rdes0 & 0x300) != 0x300) {
+			/* A packet without First/Last flag */
+			/* reuse this SKB */
+			ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+			uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+		} else {
+			/* A packet with First/Last flag */
+			rxlen = ( (rdes0 >> 16) & 0x3fff) - 4;
+
+			/* error summary bit check */
+			if (rdes0 & 0x8000) {
+				/* This is a error packet */
+				//printk(DRV_NAME ": rdes0: %lx\n", rdes0);
+				db->stats.rx_errors++;
+				if (rdes0 & 1)
+					db->stats.rx_fifo_errors++;
+				if (rdes0 & 2)
+					db->stats.rx_crc_errors++;
+				if (rdes0 & 0x80)
+					db->stats.rx_length_errors++;
+			}
+
+			if ( !(rdes0 & 0x8000) ||
+				((db->cr6_data & CR6_PM) && (rxlen>6)) ) {
+				skb = rxptr->rx_skb_ptr;
+		
+				/* Good packet, send to upper layer */
+				/* Shorst packet used new SKB */
+				if ( (rxlen < RX_COPY_SIZE) &&
+					( (skb = dev_alloc_skb(rxlen + 2) )
+					!= NULL) ) {
+					/* size less than COPY_SIZE, allocate a rxlen SKB */
+					skb->dev = dev;
+					skb_reserve(skb, 2); /* 16byte align */
+					memcpy(skb_put(skb, rxlen), rxptr->rx_skb_ptr->tail, rxlen);
+					uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+				} else {
+					skb->dev = dev;
+					skb_put(skb, rxlen);
+				}
+				skb->protocol = eth_type_trans(skb, dev);
+				netif_rx(skb);
+				dev->last_rx = jiffies;
+				db->stats.rx_packets++;
+				db->stats.rx_bytes += rxlen;
+				
+			} else {
+				/* Reuse SKB buffer when the packet is error */
+				ULI526X_DBUG(0, "Reuse SK buffer, rdes0", rdes0);
+				uli526x_reuse_skb(db, rxptr->rx_skb_ptr);
+			}
+		}
+
+		rxptr = rxptr->next_rx_desc;
+	}
+
+	db->rx_ready_ptr = rxptr;
+}
+
+
+/*
+ *	Get statistics from driver.
+ */
+
+static struct net_device_stats * uli526x_get_stats(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_get_stats", 0);
+	return &db->stats;
+}
+
+
+/*
+ * Set ULI526X multicast address
+ */
+
+static void uli526x_set_filter_mode(struct net_device * dev)
+{
+	struct uli526x_board_info *db = dev->priv;
+	unsigned long flags;
+
+	ULI526X_DBUG(0, "uli526x_set_filter_mode()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+	if (dev->flags & IFF_PROMISC) {
+		ULI526X_DBUG(0, "Enable PROM Mode", 0);
+		db->cr6_data |= CR6_PM | CR6_PBF;
+		update_cr6(db->cr6_data, db->ioaddr);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	if (dev->flags & IFF_ALLMULTI || dev->mc_count > ULI5261_MAX_MULTICAST) {
+		ULI526X_DBUG(0, "Pass all multicast address", dev->mc_count);
+		db->cr6_data &= ~(CR6_PM | CR6_PBF);
+		db->cr6_data |= CR6_PAM;
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	ULI526X_DBUG(0, "Set multicast address", dev->mc_count);
+	send_filter_frame(dev, dev->mc_count); 	/* M5261/M5263 */
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+static void
+ULi_ethtool_gset(struct uli526x_board_info *db, struct ethtool_cmd *ecmd)
+{
+	ecmd->supported = (SUPPORTED_10baseT_Half |
+	                   SUPPORTED_10baseT_Full |
+	                   SUPPORTED_100baseT_Half |
+	                   SUPPORTED_100baseT_Full |
+	                   SUPPORTED_Autoneg |
+	                   SUPPORTED_MII);
+		
+	ecmd->advertising = (ADVERTISED_10baseT_Half |
+	                   ADVERTISED_10baseT_Full |
+	                   ADVERTISED_100baseT_Half |
+	                   ADVERTISED_100baseT_Full |
+	                   ADVERTISED_Autoneg |
+	                   ADVERTISED_MII);
+
+
+	ecmd->port = PORT_MII;
+	ecmd->phy_address = db->phy_addr;
+
+	ecmd->transceiver = XCVR_EXTERNAL;
+		
+	ecmd->speed = 10;
+	ecmd->duplex = DUPLEX_HALF;
+	
+	if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+	{
+		ecmd->speed = 100;               
+	}
+	if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+	{
+		ecmd->duplex = DUPLEX_FULL;
+	}
+	if(db->link_failed)
+	{
+		ecmd->speed = -1;
+		ecmd->duplex = -1;	
+	}
+	
+	if (db->media_mode & ULI526X_AUTO)
+	{	
+		ecmd->autoneg = AUTONEG_ENABLE;
+	}
+}
+
+static void netdev_get_drvinfo(struct net_device *dev,
+			       struct ethtool_drvinfo *info)
+{
+	struct uli526x_board_info *np = netdev_priv(dev);
+
+	strcpy(info->driver, DRV_NAME);
+	strcpy(info->version, DRV_VERSION);
+	if (np->pdev)
+		strcpy(info->bus_info, pci_name(np->pdev));
+	else
+		sprintf(info->bus_info, "EISA 0x%lx %d",
+			dev->base_addr, dev->irq);
+}
+
+static int netdev_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) {
+	struct uli526x_board_info *np = netdev_priv(dev);
+	
+	ULi_ethtool_gset(np, cmd);
+	
+	return 0;
+}
+
+static u32 netdev_get_link(struct net_device *dev) {
+	struct uli526x_board_info *np = netdev_priv(dev);
+		
+	if(np->link_failed)
+		return 0;
+	else
+		return 1;
+}
+
+static void uli526x_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+	wol->supported = WAKE_PHY | WAKE_MAGIC;
+	wol->wolopts = 0;
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+	.get_drvinfo		= netdev_get_drvinfo,
+	.get_settings		= netdev_get_settings,
+	.get_link		= netdev_get_link,
+	.get_wol		= uli526x_get_wol,
+};
+
+/*
+ *	A periodic timer routine
+ *	Dynamic media sense, allocate Rx buffer...
+ */
+
+static void uli526x_timer(unsigned long data)
+{
+	u32 tmp_cr8;
+	unsigned char tmp_cr12=0;
+	struct net_device *dev = (struct net_device *) data;
+	struct uli526x_board_info *db = netdev_priv(dev);
+ 	unsigned long flags;
+	u8 TmpSpeed=10;
+	
+	//ULI526X_DBUG(0, "uli526x_timer()", 0);
+	spin_lock_irqsave(&db->lock, flags);
+
+	
+	/* Dynamic reset ULI526X : system error or transmit time-out */
+	tmp_cr8 = inl(db->ioaddr + DCR8);
+	if ( (db->interval_rx_cnt==0) && (tmp_cr8) ) {
+		db->reset_cr8++;
+		db->wait_reset = 1;
+	}
+	db->interval_rx_cnt = 0;
+
+	/* TX polling kick monitor */
+	if ( db->tx_packet_cnt &&
+	     time_after(jiffies, dev->trans_start + ULI526X_TX_KICK) ) {
+		outl(0x1, dev->base_addr + DCR1);   // Tx polling again 
+
+		// TX Timeout 
+		if ( time_after(jiffies, dev->trans_start + ULI526X_TX_TIMEOUT) ) {
+			db->reset_TXtimeout++;
+			db->wait_reset = 1;
+			printk( "%s: Tx timeout - resetting\n",
+			       dev->name);
+		}
+	}
+
+	if (db->wait_reset) {
+		ULI526X_DBUG(0, "Dynamic Reset device", db->tx_packet_cnt);
+		db->reset_count++;
+		uli526x_dynamic_reset(dev);
+		db->timer.expires = ULI526X_TIMER_WUT;
+		add_timer(&db->timer);
+		spin_unlock_irqrestore(&db->lock, flags);
+		return;
+	}
+
+	/* Link status check, Dynamic media type change */
+	if((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)!=0)
+		tmp_cr12 = 3;
+
+	if ( !(tmp_cr12 & 0x3) && !db->link_failed ) {
+		/* Link Failed */
+		ULI526X_DBUG(0, "Link Failed", tmp_cr12);
+		netif_carrier_off(dev);
+		printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+		db->link_failed = 1;
+
+		/* For Force 10/100M Half/Full mode: Enable Auto-Nego mode */
+		/* AUTO don't need */
+		if ( !(db->media_mode & 0x8) )
+			phy_write(db->ioaddr, db->phy_addr, 0, 0x1000, db->chip_id);
+
+		/* AUTO mode, if INT phyxcer link failed, select EXT device */
+		if (db->media_mode & ULI526X_AUTO) {
+			db->cr6_data&=~0x00000200;	/* bit9=0, HD mode */
+			update_cr6(db->cr6_data, db->ioaddr);
+		}
+	} else
+		if ((tmp_cr12 & 0x3) && db->link_failed) {
+			ULI526X_DBUG(0, "Link link OK", tmp_cr12);
+			db->link_failed = 0;
+
+			/* Auto Sense Speed */
+			if ( (db->media_mode & ULI526X_AUTO) &&
+				uli526x_sense_speed(db) )
+				db->link_failed = 1;
+			uli526x_process_mode(db);
+			
+			if(db->link_failed==0)
+			{
+				if(db->op_mode==ULI526X_100MHF || db->op_mode==ULI526X_100MFD)
+				{
+					TmpSpeed = 100;
+				}
+				if(db->op_mode==ULI526X_10MFD || db->op_mode==ULI526X_100MFD)
+				{
+					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Full duplex\n",dev->name,TmpSpeed);
+				}
+				else
+				{
+					printk(KERN_INFO "uli526x: %s NIC Link is Up %d Mbps Half duplex\n",dev->name,TmpSpeed);
+				}
+				netif_carrier_on(dev);
+			}
+			/* SHOW_MEDIA_TYPE(db->op_mode); */
+		}
+		else if(!(tmp_cr12 & 0x3) && db->link_failed)
+		{
+			if(db->init==1)
+			{
+				printk(KERN_INFO "uli526x: %s NIC Link is Down\n",dev->name);
+				netif_carrier_off(dev);
+			}
+		}
+		db->init=0;
+
+	/* Timer active again */
+	db->timer.expires = ULI526X_TIMER_WUT;
+	add_timer(&db->timer);
+	spin_unlock_irqrestore(&db->lock, flags);
+}
+
+
+/*
+ *	Dynamic reset the ULI526X board
+ *	Stop ULI526X board
+ *	Free Tx/Rx allocated memory
+ *	Reset ULI526X board
+ *	Re-initialize ULI526X board
+ */
+
+static void uli526x_dynamic_reset(struct net_device *dev)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+
+	ULI526X_DBUG(0, "uli526x_dynamic_reset()", 0);
+
+	/* Sopt MAC controller */
+	db->cr6_data &= ~(CR6_RXSC | CR6_TXSC);	/* Disable Tx/Rx */
+	update_cr6(db->cr6_data, dev->base_addr);
+	outl(0, dev->base_addr + DCR7);		/* Disable Interrupt */
+	outl(inl(dev->base_addr + DCR5), dev->base_addr + DCR5);
+
+	/* Disable upper layer interface */
+	netif_stop_queue(dev);
+
+	/* Free Rx Allocate buffer */
+	uli526x_free_rxbuffer(db);
+
+	/* system variable init */
+	db->tx_packet_cnt = 0;
+	db->rx_avail_cnt = 0;
+	db->link_failed = 1;
+	db->init=1;
+	db->wait_reset = 0;
+
+	/* Re-initialize ULI526X board */
+	uli526x_init(dev);
+
+	/* Restart upper layer interface */
+	netif_wake_queue(dev);
+}
+
+
+/*
+ *	free all allocated rx buffer
+ */
+
+static void uli526x_free_rxbuffer(struct uli526x_board_info * db)
+{
+	ULI526X_DBUG(0, "uli526x_free_rxbuffer()", 0);
+
+	/* free allocated rx buffer */
+	while (db->rx_avail_cnt) {
+		dev_kfree_skb(db->rx_ready_ptr->rx_skb_ptr);
+		db->rx_ready_ptr = db->rx_ready_ptr->next_rx_desc;
+		db->rx_avail_cnt--;
+	}
+}
+
+
+/*
+ *	Reuse the SK buffer
+ */
+
+static void uli526x_reuse_skb(struct uli526x_board_info *db, struct sk_buff * skb)
+{
+	struct rx_desc *rxptr = db->rx_insert_ptr;
+
+	if (!(rxptr->rdes0 & cpu_to_le32(0x80000000))) {
+		rxptr->rx_skb_ptr = skb;
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		db->rx_avail_cnt++;
+		db->rx_insert_ptr = rxptr->next_rx_desc;
+	} else
+		ULI526X_DBUG(0, "SK Buffer reuse method error", db->rx_avail_cnt);
+}
+
+
+/*
+ *	Initialize transmit/Receive descriptor
+ *	Using Chain structure, and allocate Tx/Rx buffer
+ */
+
+static void uli526x_descriptor_init(struct uli526x_board_info *db, unsigned long ioaddr)
+{
+	struct tx_desc *tmp_tx;
+	struct rx_desc *tmp_rx;
+	unsigned char *tmp_buf;
+	dma_addr_t tmp_tx_dma, tmp_rx_dma;
+	dma_addr_t tmp_buf_dma;
+	int i;
+
+	ULI526X_DBUG(0, "uli526x_descriptor_init()", 0);
+
+	/* tx descriptor start pointer */
+	db->tx_insert_ptr = db->first_tx_desc;
+	db->tx_remove_ptr = db->first_tx_desc;
+	outl(db->first_tx_desc_dma, ioaddr + DCR4);     /* TX DESC address */
+
+	/* rx descriptor start pointer */
+	db->first_rx_desc = (void *)db->first_tx_desc + sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->first_rx_desc_dma =  db->first_tx_desc_dma + sizeof(struct tx_desc) * TX_DESC_CNT;
+	db->rx_insert_ptr = db->first_rx_desc;
+	db->rx_ready_ptr = db->first_rx_desc;
+	outl(db->first_rx_desc_dma, ioaddr + DCR3);	/* RX DESC address */
+
+	/* Init Transmit chain */
+	tmp_buf = db->buf_pool_start;
+	tmp_buf_dma = db->buf_pool_dma_start;
+	tmp_tx_dma = db->first_tx_desc_dma;
+	for (tmp_tx = db->first_tx_desc, i = 0; i < TX_DESC_CNT; i++, tmp_tx++) {
+		tmp_tx->tx_buf_ptr = tmp_buf;
+		tmp_tx->tdes0 = cpu_to_le32(0);
+		tmp_tx->tdes1 = cpu_to_le32(0x81000000);	/* IC, chain */
+		tmp_tx->tdes2 = cpu_to_le32(tmp_buf_dma);
+		tmp_tx_dma += sizeof(struct tx_desc);
+		tmp_tx->tdes3 = cpu_to_le32(tmp_tx_dma);
+		tmp_tx->next_tx_desc = tmp_tx + 1;
+		tmp_buf = tmp_buf + TX_BUF_ALLOC;
+		tmp_buf_dma = tmp_buf_dma + TX_BUF_ALLOC;
+	}
+	(--tmp_tx)->tdes3 = cpu_to_le32(db->first_tx_desc_dma);
+	tmp_tx->next_tx_desc = db->first_tx_desc;
+
+	 /* Init Receive descriptor chain */
+	tmp_rx_dma=db->first_rx_desc_dma;
+	for (tmp_rx = db->first_rx_desc, i = 0; i < RX_DESC_CNT; i++, tmp_rx++) {
+		tmp_rx->rdes0 = cpu_to_le32(0);
+		tmp_rx->rdes1 = cpu_to_le32(0x01000600);
+		tmp_rx_dma += sizeof(struct rx_desc);
+		tmp_rx->rdes3 = cpu_to_le32(tmp_rx_dma);
+		tmp_rx->next_rx_desc = tmp_rx + 1;
+	}
+	(--tmp_rx)->rdes3 = cpu_to_le32(db->first_rx_desc_dma);
+	tmp_rx->next_rx_desc = db->first_rx_desc;
+
+	/* pre-allocate Rx buffer */
+	allocate_rx_buffer(db);
+}
+
+
+/*
+ *	Update CR6 value
+ *	Firstly stop ULI526X, then written value and start
+ */
+
+static void update_cr6(u32 cr6_data, unsigned long ioaddr)
+{
+
+	outl(cr6_data, ioaddr + DCR6);
+	udelay(5);
+}
+
+
+/*
+ *	Send a setup frame for M5261/M5263
+ *	This setup frame initialize ULI526X address filter mode
+ */
+
+static void send_filter_frame(struct net_device *dev, int mc_cnt)
+{
+	struct uli526x_board_info *db = netdev_priv(dev);
+	struct dev_mc_list *mcptr;
+	struct tx_desc *txptr;
+	u16 * addrptr;
+	u32 * suptr;
+	int i;
+
+	ULI526X_DBUG(0, "send_filter_frame()", 0);
+
+	txptr = db->tx_insert_ptr;
+	suptr = (u32 *) txptr->tx_buf_ptr;
+
+	/* Node address */
+	addrptr = (u16 *) dev->dev_addr;
+	*suptr++ = addrptr[0];
+	*suptr++ = addrptr[1];
+	*suptr++ = addrptr[2];
+
+	/* broadcast address */
+	*suptr++ = 0xffff;
+	*suptr++ = 0xffff;
+	*suptr++ = 0xffff;
+
+	/* fit the multicast address */
+	for (mcptr = dev->mc_list, i = 0; i < mc_cnt; i++, mcptr = mcptr->next) {
+		addrptr = (u16 *) mcptr->dmi_addr;
+		*suptr++ = addrptr[0];
+		*suptr++ = addrptr[1];
+		*suptr++ = addrptr[2];
+	}
+
+	for (; i<14; i++) {
+		*suptr++ = 0xffff;
+		*suptr++ = 0xffff;
+		*suptr++ = 0xffff;
+	}
+
+	/* prepare the setup frame */
+	db->tx_insert_ptr = txptr->next_tx_desc;
+	txptr->tdes1 = cpu_to_le32(0x890000c0);
+
+	/* Resource Check and Send the setup packet */
+	if (db->tx_packet_cnt < TX_DESC_CNT) {
+		/* Resource Empty */
+		db->tx_packet_cnt++;
+		txptr->tdes0 = cpu_to_le32(0x80000000);
+		update_cr6(db->cr6_data | 0x2000, dev->base_addr);
+		outl(0x1, dev->base_addr + DCR1);	/* Issue Tx polling */
+		update_cr6(db->cr6_data, dev->base_addr);
+		dev->trans_start = jiffies;
+	} else
+		printk(KERN_ERR DRV_NAME ": No Tx resource - Send_filter_frame!\n");
+}
+
+
+/*
+ *	Allocate rx buffer,
+ *	As possible as allocate maxiumn Rx buffer
+ */
+
+static void allocate_rx_buffer(struct uli526x_board_info *db)
+{
+	struct rx_desc *rxptr;
+	struct sk_buff *skb;
+
+	rxptr = db->rx_insert_ptr;
+
+	while(db->rx_avail_cnt < RX_DESC_CNT) {
+		if ( ( skb = dev_alloc_skb(RX_ALLOC_SIZE) ) == NULL )
+			break;
+		rxptr->rx_skb_ptr = skb; /* FIXME (?) */
+		rxptr->rdes2 = cpu_to_le32( pci_map_single(db->pdev, skb->tail, RX_ALLOC_SIZE, PCI_DMA_FROMDEVICE) );
+		wmb();
+		rxptr->rdes0 = cpu_to_le32(0x80000000);
+		rxptr = rxptr->next_rx_desc;
+		db->rx_avail_cnt++;
+	}
+
+	db->rx_insert_ptr = rxptr;
+}
+
+
+/*
+ *	Read one word data from the serial ROM
+ */
+
+static u16 read_srom_word(long ioaddr, int offset)
+{
+	int i;
+	u16 srom_data = 0;
+	long cr9_ioaddr = ioaddr + DCR9;
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	/* Send the Read Command 110b */
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_1, cr9_ioaddr);
+	SROM_CLK_WRITE(SROM_DATA_0, cr9_ioaddr);
+
+	/* Send the offset */
+	for (i = 5; i >= 0; i--) {
+		srom_data = (offset & (1 << i)) ? SROM_DATA_1 : SROM_DATA_0;
+		SROM_CLK_WRITE(srom_data, cr9_ioaddr);
+	}
+
+	outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+
+	for (i = 16; i > 0; i--) {
+		outl(CR9_SROM_READ | CR9_SRCS | CR9_SRCLK, cr9_ioaddr);
+		udelay(5);
+		srom_data = (srom_data << 1) | ((inl(cr9_ioaddr) & CR9_CRDOUT) ? 1 : 0);
+		outl(CR9_SROM_READ | CR9_SRCS, cr9_ioaddr);
+		udelay(5);
+	}
+
+	outl(CR9_SROM_READ, cr9_ioaddr);
+	return srom_data;
+}
+
+
+/*
+ *	Auto sense the media mode
+ */
+
+static u8 uli526x_sense_speed(struct uli526x_board_info * db)
+{
+	u8 ErrFlag = 0;
+	u16 phy_mode;
+
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+	phy_mode = phy_read(db->ioaddr, db->phy_addr, 1, db->chip_id);
+
+	if ( (phy_mode & 0x24) == 0x24 ) {
+		
+		phy_mode = ((phy_read(db->ioaddr, db->phy_addr, 5, db->chip_id) & 0x01e0)<<7);
+		if(phy_mode&0x8000)
+			phy_mode = 0x8000;
+		else if(phy_mode&0x4000)
+			phy_mode = 0x4000;
+		else if(phy_mode&0x2000)
+			phy_mode = 0x2000;
+		else
+			phy_mode = 0x1000;
+		
+		/* printk(DRV_NAME ": Phy_mode %x ",phy_mode); */
+		switch (phy_mode) {
+		case 0x1000: db->op_mode = ULI526X_10MHF; break;
+		case 0x2000: db->op_mode = ULI526X_10MFD; break;
+		case 0x4000: db->op_mode = ULI526X_100MHF; break;
+		case 0x8000: db->op_mode = ULI526X_100MFD; break;
+		default: db->op_mode = ULI526X_10MHF; ErrFlag = 1; break;
+		}
+	} else {
+		db->op_mode = ULI526X_10MHF;
+		ULI526X_DBUG(0, "Link Failed :", phy_mode);
+		ErrFlag = 1;
+	}
+
+	return ErrFlag;
+}
+
+
+/*
+ *	Set 10/100 phyxcer capability
+ *	AUTO mode : phyxcer register4 is NIC capability
+ *	Force mode: phyxcer register4 is the force media
+ */
+
+static void uli526x_set_phyxcer(struct uli526x_board_info *db)
+{
+	u16 phy_reg;
+	
+	/* Phyxcer capability setting */
+	phy_reg = phy_read(db->ioaddr, db->phy_addr, 4, db->chip_id) & ~0x01e0;
+
+	if (db->media_mode & ULI526X_AUTO) {
+		/* AUTO Mode */
+		phy_reg |= db->PHY_reg4;
+	} else {
+		/* Force Mode */
+		switch(db->media_mode) {
+		case ULI526X_10MHF: phy_reg |= 0x20; break;
+		case ULI526X_10MFD: phy_reg |= 0x40; break;
+		case ULI526X_100MHF: phy_reg |= 0x80; break;
+		case ULI526X_100MFD: phy_reg |= 0x100; break;
+		}
+		
+	}
+
+  	/* Write new capability to Phyxcer Reg4 */
+	if ( !(phy_reg & 0x01e0)) {
+		phy_reg|=db->PHY_reg4;
+		db->media_mode|=ULI526X_AUTO;
+	}
+	phy_write(db->ioaddr, db->phy_addr, 4, phy_reg, db->chip_id);
+
+ 	/* Restart Auto-Negotiation */
+	phy_write(db->ioaddr, db->phy_addr, 0, 0x1200, db->chip_id);
+	udelay(50);
+}
+
+
+/*
+ *	Process op-mode
+ 	AUTO mode : PHY controller in Auto-negotiation Mode
+ *	Force mode: PHY controller in force mode with HUB
+ *			N-way force capability with SWITCH
+ */
+
+static void uli526x_process_mode(struct uli526x_board_info *db)
+{
+	u16 phy_reg;
+
+	/* Full Duplex Mode Check */
+	if (db->op_mode & 0x4)
+		db->cr6_data |= CR6_FDM;	/* Set Full Duplex Bit */
+	else
+		db->cr6_data &= ~CR6_FDM;	/* Clear Full Duplex Bit */
+
+	update_cr6(db->cr6_data, db->ioaddr);
+
+	/* 10/100M phyxcer force mode need */
+	if ( !(db->media_mode & 0x8)) {
+		/* Forece Mode */
+		phy_reg = phy_read(db->ioaddr, db->phy_addr, 6, db->chip_id);
+		if ( !(phy_reg & 0x1) ) {
+			/* parter without N-Way capability */
+			phy_reg = 0x0;
+			switch(db->op_mode) {
+			case ULI526X_10MHF: phy_reg = 0x0; break;
+			case ULI526X_10MFD: phy_reg = 0x100; break;
+			case ULI526X_100MHF: phy_reg = 0x2000; break;
+			case ULI526X_100MFD: phy_reg = 0x2100; break;
+			}
+			phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+       			phy_write(db->ioaddr, db->phy_addr, 0, phy_reg, db->chip_id);
+		}
+	}
+}
+
+
+/*
+ *	Write a word to Phy register
+ */
+
+static void phy_write(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data, u32 chip_id)
+{
+	u16 i;
+	unsigned long ioaddr;
+
+	if(chip_id == PCI_ULI5263_ID)
+	{
+		phy_writeby_cr10(iobase, phy_addr, offset, phy_data);
+		return;
+	}
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send write command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* written trasnition */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Write a word data to PHY controller */
+	for ( i = 0x8000; i > 0; i >>= 1)
+		phy_write_1bit(ioaddr, phy_data & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+	
+}
+
+
+/*
+ *	Read a word data from phy register
+ */
+
+static u16 phy_read(unsigned long iobase, u8 phy_addr, u8 offset, u32 chip_id)
+{
+	int i;
+	u16 phy_data;
+	unsigned long ioaddr;
+
+	if(chip_id == PCI_ULI5263_ID)
+		return phy_readby_cr10(iobase, phy_addr, offset);
+	/* M5261/M5263 Chip */
+	ioaddr = iobase + DCR9;
+	
+	/* Send 33 synchronization clock to Phy controller */
+	for (i = 0; i < 35; i++)
+		phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send start command(01) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+
+	/* Send read command(10) to Phy */
+	phy_write_1bit(ioaddr, PHY_DATA_1, chip_id);
+	phy_write_1bit(ioaddr, PHY_DATA_0, chip_id);
+
+	/* Send Phy address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, phy_addr & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Send register address */
+	for (i = 0x10; i > 0; i = i >> 1)
+		phy_write_1bit(ioaddr, offset & i ? PHY_DATA_1 : PHY_DATA_0, chip_id);
+
+	/* Skip transition state */
+	phy_read_1bit(ioaddr, chip_id);
+
+	/* read 16bit data */
+	for (phy_data = 0, i = 0; i < 16; i++) {
+		phy_data <<= 1;
+		phy_data |= phy_read_1bit(ioaddr, chip_id);
+	}
+
+	return phy_data;
+}
+
+static u16 phy_readby_cr10(unsigned long iobase, u8 phy_addr, u8 offset)
+{
+	unsigned long ioaddr,cr10_value;
+	
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x08000000;
+	outl(cr10_value,ioaddr);
+	udelay(1);
+	while(1)
+	{
+		cr10_value = inl(ioaddr);
+		if(cr10_value&0x10000000)
+			break;
+	}
+	return (cr10_value&0x0ffff);
+}
+
+static void phy_writeby_cr10(unsigned long iobase, u8 phy_addr, u8 offset, u16 phy_data)
+{
+	unsigned long ioaddr,cr10_value;
+	
+	ioaddr = iobase + DCR10;
+	cr10_value = phy_addr;
+	cr10_value = (cr10_value<<5) + offset;
+	cr10_value = (cr10_value<<16) + 0x04000000 + phy_data;
+	outl(cr10_value,ioaddr);
+	udelay(1);
+}
+/*
+ *	Write one bit data to Phy Controller
+ */
+
+static void phy_write_1bit(unsigned long ioaddr, u32 phy_data, u32 chip_id)
+{
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+	outl(phy_data  | MDCLKH, ioaddr);	/* MII Clock High */
+	udelay(1);
+	outl(phy_data , ioaddr);			/* MII Clock Low */
+	udelay(1);
+}
+
+
+/*
+ *	Read one bit phy data from PHY controller
+ */
+
+static u16 phy_read_1bit(unsigned long ioaddr, u32 chip_id)
+{
+	u16 phy_data;
+	
+	outl(0x50000 , ioaddr);
+	udelay(1);
+	phy_data = ( inl(ioaddr) >> 19 ) & 0x1;
+	outl(0x40000 , ioaddr);
+	udelay(1);
+
+	return phy_data;
+}
+
+
+static struct pci_device_id uli526x_pci_tbl[] = {
+	{ 0x10B9, 0x5261, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5261_ID },
+	{ 0x10B9, 0x5263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, PCI_ULI5263_ID },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, uli526x_pci_tbl);
+
+
+static struct pci_driver uli526x_driver = {
+	.name		= "uli526x",
+	.id_table	= uli526x_pci_tbl,
+	.probe		= uli526x_init_one,
+	.remove		= __devexit_p(uli526x_remove_one),
+};
+
+MODULE_AUTHOR("Peer Chen, peer.chen@uli.com.tw");
+MODULE_DESCRIPTION("ULi M5261/M5263 fast ethernet driver");
+MODULE_LICENSE("GPL");
+
+MODULE_PARM(debug, "i");
+MODULE_PARM(mode, "i");
+MODULE_PARM(cr6set, "i");
+MODULE_PARM_DESC(debug, "ULi M5261/M5263 enable debugging (0-1)");
+MODULE_PARM_DESC(mode, "ULi M5261/M5263: Bit 0: 10/100Mbps, bit 2: duplex, bit 8: HomePNA");
+
+/*	Description:
+ *	when user used insmod to add module, system invoked init_module()
+ *	to register the services.
+ */
+
+static int __init uli526x_init_module(void)
+{
+	int rc;
+
+	printk(version);
+	printed_version = 1;
+
+	ULI526X_DBUG(0, "init_module() ", debug);
+
+	if (debug)
+		uli526x_debug = debug;	/* set debug flag */
+	if (cr6set)
+		uli526x_cr6_user_set = cr6set;
+
+ 	switch(mode) {
+   	case ULI526X_10MHF:
+	case ULI526X_100MHF:
+	case ULI526X_10MFD:
+	case ULI526X_100MFD:
+		uli526x_media_mode = mode;
+		break;
+	default:uli526x_media_mode = ULI526X_AUTO;
+		break;
+	}
+
+	rc = pci_module_init(&uli526x_driver);
+	if (rc < 0)
+		return rc;
+
+	return 0;
+}
+
+
+/*
+ *	Description:
+ *	when user used rmmod to delete module, system invoked clean_module()
+ *	to un-register all registered services.
+ */
+
+static void __exit uli526x_cleanup_module(void)
+{
+	ULI526X_DBUG(0, "uli526x_clean_module() ", debug);
+	pci_unregister_driver(&uli526x_driver);
+}
+
+module_init(uli526x_init_module);
+module_exit(uli526x_cleanup_module);
diff --git a/drivers/net/wan/cycx_drv.c b/drivers/net/wan/cycx_drv.c
index 6e74af62ca0..9e56fc346ba 100644
--- a/drivers/net/wan/cycx_drv.c
+++ b/drivers/net/wan/cycx_drv.c
@@ -56,7 +56,7 @@
 #include <linux/sched.h>	/* for jiffies, HZ, etc. */
 #include <linux/cycx_drv.h>	/* API definitions */
 #include <linux/cycx_cfm.h>	/* CYCX firmware module definitions */
-#include <linux/delay.h>	/* udelay */
+#include <linux/delay.h>	/* udelay, msleep_interruptible */
 #include <asm/io.h>		/* read[wl], write[wl], ioremap, iounmap */
 
 #define	MOD_VERSION	0
@@ -74,7 +74,6 @@ static int reset_cyc2x(void __iomem *addr);
 static int detect_cyc2x(void __iomem *addr);
 
 /* Miscellaneous functions */
-static void delay_cycx(int sec);
 static int get_option_index(long *optlist, long optval);
 static u16 checksum(u8 *buf, u32 len);
 
@@ -259,7 +258,7 @@ static int memory_exists(void __iomem *addr)
 			if (readw(addr + 0x10) == TEST_PATTERN)
 				return 1;
 
-		delay_cycx(1);
+		msleep_interruptible(1 * 1000);
 	}
 
 	return 0;
@@ -316,7 +315,7 @@ static void cycx_reset_boot(void __iomem *addr, u8 *code, u32 len)
 
 	/* 80186 was in hold, go */
 	writeb(0, addr + START_CPU);
-	delay_cycx(1);
+	msleep_interruptible(1 * 1000);
 }
 
 /* Load data.bin file through boot (reset) interface. */
@@ -462,13 +461,13 @@ static int load_cyc2x(struct cycx_hw *hw, struct cycx_firmware *cfm, u32 len)
 		cycx_reset_boot(hw->dpmbase, reset_image, img_hdr->reset_size);
 		/* reset is waiting for boot */
 		writew(GEN_POWER_ON, pt_cycld);
-		delay_cycx(1);
+		msleep_interruptible(1 * 1000);
 
 		for (j = 0 ; j < 3 ; j++)
 			if (!readw(pt_cycld))
 				goto reset_loaded;
 			else
-				delay_cycx(1);
+				msleep_interruptible(1 * 1000);
 	}
 
 	printk(KERN_ERR "%s: reset not started.\n", modname);
@@ -495,7 +494,7 @@ reset_loaded:
 
 	/* Arthur Ganzert's tip: wait a while after the firmware loading...
 	   seg abr 26 17:17:12 EST 1999 - acme */
-	delay_cycx(7);
+	msleep_interruptible(7 * 1000);
 	printk(KERN_INFO "%s: firmware loaded!\n", modname);
 
 	/* enable interrupts */
@@ -547,20 +546,13 @@ static int get_option_index(long *optlist, long optval)
 static int reset_cyc2x(void __iomem *addr)
 {
 	writeb(0, addr + RST_ENABLE);
-	delay_cycx(2);
+	msleep_interruptible(2 * 1000);
 	writeb(0, addr + RST_DISABLE);
-	delay_cycx(2);
+	msleep_interruptible(2 * 1000);
 
 	return memory_exists(addr);
 }
 
-/* Delay */
-static void delay_cycx(int sec)
-{
-	set_current_state(TASK_INTERRUPTIBLE);
-	schedule_timeout(sec * HZ);
-}
-
 /* Calculate 16-bit CRC using CCITT polynomial. */
 static u16 checksum(u8 *buf, u32 len)
 {
diff --git a/drivers/net/wan/hdlc_generic.c b/drivers/net/wan/hdlc_generic.c
index a63f6a2cc4f..cdd4c09c2d9 100644
--- a/drivers/net/wan/hdlc_generic.c
+++ b/drivers/net/wan/hdlc_generic.c
@@ -61,7 +61,7 @@ static struct net_device_stats *hdlc_get_stats(struct net_device *dev)
 
 
 static int hdlc_rcv(struct sk_buff *skb, struct net_device *dev,
-		    struct packet_type *p)
+		    struct packet_type *p, struct net_device *orig_dev)
 {
 	hdlc_device *hdlc = dev_to_hdlc(dev);
 	if (hdlc->proto.netif_rx)
diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c
index 7f2e3653c5e..6c302e9dbca 100644
--- a/drivers/net/wan/lapbether.c
+++ b/drivers/net/wan/lapbether.c
@@ -86,7 +86,7 @@ static __inline__ int dev_is_ethdev(struct net_device *dev)
 /*
  *	Receive a LAPB frame via an ethernet interface.
  */
-static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype)
+static int lapbeth_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *ptype, struct net_device *orig_dev)
 {
 	int len, err;
 	struct lapbethdev *lapbeth;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index c5f5e62aab8..0497dbdb863 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -445,7 +445,7 @@ void 	s508_s514_unlock(sdla_t *card, unsigned long *smp_flags);
 void 	s508_s514_lock(sdla_t *card, unsigned long *smp_flags);
 
 unsigned short calc_checksum (char *, int);
-static int setup_fr_header(struct sk_buff** skb,
+static int setup_fr_header(struct sk_buff *skb,
 			   struct net_device* dev, char op_mode);
 
 
@@ -1372,7 +1372,7 @@ static int if_send(struct sk_buff* skb, struct net_device* dev)
 	/* Move the if_header() code to here. By inserting frame
 	 * relay header in if_header() we would break the
 	 * tcpdump and other packet sniffers */
-	chan->fr_header_len = setup_fr_header(&skb,dev,chan->common.usedby);
+	chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby);
 	if (chan->fr_header_len < 0 ){
 		++chan->ifstats.tx_dropped;
 		++card->wandev.stats.tx_dropped;
@@ -1597,8 +1597,6 @@ static int setup_for_delayed_transmit(struct net_device* dev,
 		return 1;
 	}
 
-	skb_unlink(skb);
-	
         chan->transmit_length = len;
 	chan->delay_skb = skb;
         
@@ -4871,18 +4869,15 @@ static void unconfig_fr (sdla_t *card)
 	}
 }
 
-static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
+static int setup_fr_header(struct sk_buff *skb, struct net_device* dev,
 			   char op_mode)
 {
-	struct sk_buff *skb = *skb_orig;
 	fr_channel_t *chan=dev->priv;
 
-	if (op_mode == WANPIPE){
-
+	if (op_mode == WANPIPE) {
 		chan->fr_header[0]=Q922_UI;
 		
 		switch (htons(skb->protocol)){
-			
 		case ETH_P_IP:
 			chan->fr_header[1]=NLPID_IP;
 			break;
@@ -4894,16 +4889,14 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
 	}
 
 	/* If we are in bridging mode, we must apply
-	 * an Ethernet header */
-	if (op_mode == BRIDGE || op_mode == BRIDGE_NODE){
-
-
+	 * an Ethernet header
+	 */
+	if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) {
 		/* Encapsulate the packet as a bridged Ethernet frame. */
 #ifdef DEBUG
 		printk(KERN_INFO "%s: encapsulating skb for frame relay\n", 
 			dev->name);
 #endif
-		
 		chan->fr_header[0] = 0x03;
 		chan->fr_header[1] = 0x00;
 		chan->fr_header[2] = 0x80;
@@ -4916,7 +4909,6 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
 		/* Yuck. */
 		skb->protocol = ETH_P_802_3;
 		return 8;
-
 	}
 		
 	return 0;
diff --git a/drivers/net/wan/syncppp.c b/drivers/net/wan/syncppp.c
index 84b65c60c79..f58c794a963 100644
--- a/drivers/net/wan/syncppp.c
+++ b/drivers/net/wan/syncppp.c
@@ -1447,7 +1447,7 @@ static void sppp_print_bytes (u_char *p, u16 len)
  *	after interrupt servicing to process frames queued via netif_rx.
  */
 
-static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p)
+static int sppp_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *p, struct net_device *orig_dev)
 {
 	if ((skb = skb_share_check(skb, GFP_ATOMIC)) == NULL)
 		return NET_RX_DROP;
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
index 4d0b5a336bd..d7947358e49 100644
--- a/drivers/net/wireless/orinoco.c
+++ b/drivers/net/wireless/orinoco.c
@@ -4323,36 +4323,36 @@ static const struct iw_priv_args orinoco_privtab[] = {
  */
 
 static const iw_handler	orinoco_handler[] = {
-	[SIOCSIWCOMMIT-SIOCIWFIRST] (iw_handler) orinoco_ioctl_commit,
-	[SIOCGIWNAME  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getname,
-	[SIOCSIWFREQ  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfreq,
-	[SIOCGIWFREQ  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfreq,
-	[SIOCSIWMODE  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setmode,
-	[SIOCGIWMODE  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getmode,
-	[SIOCSIWSENS  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setsens,
-	[SIOCGIWSENS  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getsens,
-	[SIOCGIWRANGE -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwrange,
-	[SIOCSIWSPY   -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setspy,
-	[SIOCGIWSPY   -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getspy,
-	[SIOCSIWAP    -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setwap,
-	[SIOCGIWAP    -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getwap,
-	[SIOCSIWSCAN  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setscan,
-	[SIOCGIWSCAN  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getscan,
-	[SIOCSIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setessid,
-	[SIOCGIWESSID -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getessid,
-	[SIOCSIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setnick,
-	[SIOCGIWNICKN -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getnick,
-	[SIOCSIWRATE  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrate,
-	[SIOCGIWRATE  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrate,
-	[SIOCSIWRTS   -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setrts,
-	[SIOCGIWRTS   -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getrts,
-	[SIOCSIWFRAG  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setfrag,
-	[SIOCGIWFRAG  -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getfrag,
-	[SIOCGIWRETRY -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getretry,
-	[SIOCSIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_setiwencode,
-	[SIOCGIWENCODE-SIOCIWFIRST] (iw_handler) orinoco_ioctl_getiwencode,
-	[SIOCSIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_setpower,
-	[SIOCGIWPOWER -SIOCIWFIRST] (iw_handler) orinoco_ioctl_getpower,
+	[SIOCSIWCOMMIT-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_commit,
+	[SIOCGIWNAME  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getname,
+	[SIOCSIWFREQ  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfreq,
+	[SIOCGIWFREQ  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfreq,
+	[SIOCSIWMODE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setmode,
+	[SIOCGIWMODE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getmode,
+	[SIOCSIWSENS  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setsens,
+	[SIOCGIWSENS  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getsens,
+	[SIOCGIWRANGE -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwrange,
+	[SIOCSIWSPY   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setspy,
+	[SIOCGIWSPY   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getspy,
+	[SIOCSIWAP    -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setwap,
+	[SIOCGIWAP    -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getwap,
+	[SIOCSIWSCAN  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setscan,
+	[SIOCGIWSCAN  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getscan,
+	[SIOCSIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setessid,
+	[SIOCGIWESSID -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getessid,
+	[SIOCSIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setnick,
+	[SIOCGIWNICKN -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getnick,
+	[SIOCSIWRATE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrate,
+	[SIOCGIWRATE  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrate,
+	[SIOCSIWRTS   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setrts,
+	[SIOCGIWRTS   -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getrts,
+	[SIOCSIWFRAG  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setfrag,
+	[SIOCGIWFRAG  -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getfrag,
+	[SIOCGIWRETRY -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getretry,
+	[SIOCSIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setiwencode,
+	[SIOCGIWENCODE-SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getiwencode,
+	[SIOCSIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_setpower,
+	[SIOCGIWPOWER -SIOCIWFIRST] = (iw_handler) orinoco_ioctl_getpower,
 };
 
 
@@ -4360,15 +4360,15 @@ static const iw_handler	orinoco_handler[] = {
   Added typecasting since we no longer use iwreq_data -- Moustafa
  */
 static const iw_handler	orinoco_private_handler[] = {
-	[0] (iw_handler) orinoco_ioctl_reset,
-	[1] (iw_handler) orinoco_ioctl_reset,
-	[2] (iw_handler) orinoco_ioctl_setport3,
-	[3] (iw_handler) orinoco_ioctl_getport3,
-	[4] (iw_handler) orinoco_ioctl_setpreamble,
-	[5] (iw_handler) orinoco_ioctl_getpreamble,
-	[6] (iw_handler) orinoco_ioctl_setibssport,
-	[7] (iw_handler) orinoco_ioctl_getibssport,
-	[9] (iw_handler) orinoco_ioctl_getrid,
+	[0] = (iw_handler) orinoco_ioctl_reset,
+	[1] = (iw_handler) orinoco_ioctl_reset,
+	[2] = (iw_handler) orinoco_ioctl_setport3,
+	[3] = (iw_handler) orinoco_ioctl_getport3,
+	[4] = (iw_handler) orinoco_ioctl_setpreamble,
+	[5] = (iw_handler) orinoco_ioctl_getpreamble,
+	[6] = (iw_handler) orinoco_ioctl_setibssport,
+	[7] = (iw_handler) orinoco_ioctl_getibssport,
+	[9] = (iw_handler) orinoco_ioctl_getrid,
 };
 
 static const struct iw_handler_def orinoco_handler_def = {