diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-02-11 12:05:55 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-02-11 12:05:55 -0800 |
| commit | 16e5a2ed5920f511666a8714f43987bb0e2ad751 (patch) | |
| tree | 318c36ed6e45733b9ef0e0d9c498df99d40eab93 /drivers/net | |
| parent | 6792dfe383dd20ed270da198aa0676bac47245b4 (diff) | |
| parent | 20e7c4e80dcd01dad5e6c8b32455228b8fe9c619 (diff) | |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking updates from David Miller:
1) Fix flexcan build on big endian, from Arnd Bergmann
2) Correctly attach cpsw to GPIO bitbang MDIO drive, from Stefan Roese
3) udp_add_offload has to use GFP_ATOMIC since it can be invoked from
non-sleepable contexts. From Or Gerlitz
4) vxlan_gro_receive() does not iterate over all possible flows
properly, fix also from Or Gerlitz
5) CAN core doesn't use a proper SKB destructor when it hooks up
sockets to SKBs. Fix from Oliver Hartkopp
6) ip_tunnel_xmit() can use an uninitialized route pointer, fix from
Eric Dumazet
7) Fix address family assignment in IPVS, from Michal Kubecek
8) Fix ath9k build on ARM, from Sujith Manoharan
9) Make sure fail_over_mac only applies for the correct bonding modes,
from Ding Tianhong
10) The udp offload code doesn't use RCU correctly, from Shlomo Pongratz
11) Handle gigabit features properly in generic PHY code, from Florian
Fainelli
12) Don't blindly invoke link operations in
rtnl_link_get_slave_info_data_size, they are optional. Fix from
Fernando Luis Vazquez Cao
13) Add USB IDs for Netgear Aircard 340U, from Bjørn Mork
14) Handle netlink packet padding properly in openvswitch, from Thomas
Graf
15) Fix oops when deleting chains in nf_tables, from Patrick McHardy
16) Fix RX stalls in xen-netback driver, from Zoltan Kiss
17) Fix deadlock in mac80211 stack, from Emmanuel Grumbach
18) inet_nlmsg_size() forgets to consider ifa_cacheinfo, fix from Geert
Uytterhoeven
19) tg3_change_mtu() can deadlock, fix from Nithin Sujir
20) Fix regression in setting SCTP local source addresses on accepted
sockets, caused by some generic ipv6 socket changes. Fix from
Matija Glavinic Pecotic
21) IPPROTO_* must be pure defines, otherwise module aliases don't get
constructed properly. Fix from Jan Moskyto
22) IPV6 netconsole setup doesn't work properly unless an explicit
source address is specified, fix from Sabrina Dubroca
23) Use __GFP_NORETRY for high order skb page allocations in
sock_alloc_send_pskb and skb_page_frag_refill. From Eric Dumazet
24) Fix a regression added in netconsole over bridging, from Cong Wang
25) TCP uses an artificial offset of 1ms for SRTT, but this doesn't jive
well with TCP pacing which needs the SRTT to be accurate. Fix from
Eric Dumazet
26) Several cases of missing header file includes from Rashika Kheria
27) Add ZTE MF667 device ID to qmi_wwan driver, from Raymond Wanyoike
28) TCP Small Queues doesn't handle nonagle properly in some corner
cases, fix from Eric Dumazet
29) Remove extraneous read_unlock in bond_enslave, whoops. From Ding
Tianhong
30) Fix 9p trans_virtio handling of vmalloc buffers, from Richard Yao
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (136 commits)
6lowpan: fix lockdep splats
alx: add missing stats_lock spinlock init
9p/trans_virtio.c: Fix broken zero-copy on vmalloc() buffers
bonding: remove unwanted bond lock for enslave processing
USB2NET : SR9800 : One chip USB2.0 USB2NET SR9800 Device Driver Support
tcp: tsq: fix nonagle handling
bridge: Prevent possible race condition in br_fdb_change_mac_address
bridge: Properly check if local fdb entry can be deleted when deleting vlan
bridge: Properly check if local fdb entry can be deleted in br_fdb_delete_by_port
bridge: Properly check if local fdb entry can be deleted in br_fdb_change_mac_address
bridge: Fix the way to check if a local fdb entry can be deleted
bridge: Change local fdb entries whenever mac address of bridge device changes
bridge: Fix the way to find old local fdb entries in br_fdb_change_mac_address
bridge: Fix the way to insert new local fdb entries in br_fdb_changeaddr
bridge: Fix the way to find old local fdb entries in br_fdb_changeaddr
tcp: correct code comment stating 3 min timeout for FIN_WAIT2, we only do 1 min
net: vxge: Remove unused device pointer
net: qmi_wwan: add ZTE MF667
3c59x: Remove unused pointer in vortex_eisa_cleanup()
net: fix 'ip rule' iif/oif device rename
...
Diffstat (limited to 'drivers/net')
57 files changed, 1525 insertions, 305 deletions
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 4c08018d733..71ba18efa15 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -1270,9 +1270,13 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) if (slave_ops->ndo_set_mac_address == NULL) { if (!bond_has_slaves(bond)) { - pr_warning("%s: Warning: The first slave device specified does not support setting the MAC address. Setting fail_over_mac to active.", - bond_dev->name); - bond->params.fail_over_mac = BOND_FOM_ACTIVE; + pr_warn("%s: Warning: The first slave device specified does not support setting the MAC address.\n", + bond_dev->name); + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) { + bond->params.fail_over_mac = BOND_FOM_ACTIVE; + pr_warn("%s: Setting fail_over_mac to active for active-backup mode.\n", + bond_dev->name); + } } else if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { pr_err("%s: Error: The slave device specified does not support setting the MAC address, but fail_over_mac is not set to active.\n", bond_dev->name); @@ -1315,7 +1319,8 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) */ memcpy(new_slave->perm_hwaddr, slave_dev->dev_addr, ETH_ALEN); - if (!bond->params.fail_over_mac) { + if (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* * Set slave to master's mac address. The application already * set the master's mac address to that of the first slave @@ -1505,7 +1510,6 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev) slave_dev->npinfo = bond->dev->npinfo; if (slave_dev->npinfo) { if (slave_enable_netpoll(new_slave)) { - read_unlock(&bond->lock); pr_info("Error, %s: master_dev is using netpoll, " "but new slave device does not support netpoll.\n", bond_dev->name); @@ -1579,7 +1583,8 @@ err_close: dev_close(slave_dev); err_restore_mac: - if (!bond->params.fail_over_mac) { + if (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* XXX TODO - fom follow mode needs to change master's * MAC if this slave's MAC is in use by the bond, or at * least print a warning. @@ -1672,7 +1677,8 @@ static int __bond_release_one(struct net_device *bond_dev, bond->current_arp_slave = NULL; - if (!all && !bond->params.fail_over_mac) { + if (!all && (!bond->params.fail_over_mac || + bond->params.mode != BOND_MODE_ACTIVEBACKUP)) { if (ether_addr_equal_64bits(bond_dev->dev_addr, slave->perm_hwaddr) && bond_has_slaves(bond)) pr_warn("%s: Warning: the permanent HWaddr of %s - %pM - is still in use by %s. Set the HWaddr of %s to a different address to avoid conflicts.\n", @@ -1769,7 +1775,8 @@ static int __bond_release_one(struct net_device *bond_dev, /* close slave before restoring its mac address */ dev_close(slave_dev); - if (bond->params.fail_over_mac != BOND_FOM_ACTIVE) { + if (bond->params.fail_over_mac != BOND_FOM_ACTIVE || + bond->params.mode != BOND_MODE_ACTIVEBACKUP) { /* restore original ("permanent") mac address */ memcpy(addr.sa_data, slave->perm_hwaddr, ETH_ALEN); addr.sa_family = slave_dev->type; @@ -3431,7 +3438,8 @@ static int bond_set_mac_address(struct net_device *bond_dev, void *addr) /* If fail_over_mac is enabled, do nothing and return success. * Returning an error causes ifenslave to fail. */ - if (bond->params.fail_over_mac) + if (bond->params.fail_over_mac && + bond->params.mode == BOND_MODE_ACTIVEBACKUP) return 0; if (!is_valid_ether_addr(sa->sa_data)) diff --git a/drivers/net/can/Kconfig b/drivers/net/can/Kconfig index d447b881bbd..9e7d95dae2c 100644 --- a/drivers/net/can/Kconfig +++ b/drivers/net/can/Kconfig @@ -104,7 +104,7 @@ config CAN_JANZ_ICAN3 config CAN_FLEXCAN tristate "Support for Freescale FLEXCAN based chips" - depends on (ARM && CPU_LITTLE_ENDIAN) || PPC + depends on ARM || PPC ---help--- Say Y here if you want to support for Freescale FlexCAN. diff --git a/drivers/net/can/dev.c b/drivers/net/can/dev.c index 13a909822e2..fc59bc6f040 100644 --- a/drivers/net/can/dev.c +++ b/drivers/net/can/dev.c @@ -323,19 +323,10 @@ void can_put_echo_skb(struct sk_buff *skb, struct net_device *dev, } if (!priv->echo_skb[idx]) { - struct sock *srcsk = skb->sk; - if (atomic_read(&skb->users) != 1) { - struct sk_buff *old_skb = skb; - - skb = skb_clone(old_skb, GFP_ATOMIC); - kfree_skb(old_skb); - if (!skb) - return; - } else - skb_orphan(skb); - - skb->sk = srcsk; + skb = can_create_echo_skb(skb); + if (!skb) + return; /* make settings for echo to reduce code in irq context */ skb->protocol = htons(ETH_P_CAN); diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index aaed97bee47..320bef2dba4 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -235,9 +235,12 @@ static const struct can_bittiming_const flexcan_bittiming_const = { }; /* - * Abstract off the read/write for arm versus ppc. + * Abstract off the read/write for arm versus ppc. This + * assumes that PPC uses big-endian registers and everything + * else uses little-endian registers, independent of CPU + * endianess. */ -#if defined(__BIG_ENDIAN) +#if defined(CONFIG_PPC) static inline u32 flexcan_read(void __iomem *addr) { return in_be32(addr); diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index e24e6690d67..71594e5676f 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -18,6 +18,7 @@ #include <linux/netdevice.h> #include <linux/can.h> #include <linux/can/dev.h> +#include <linux/can/skb.h> #include <linux/can/error.h> #include <linux/mfd/janz.h> @@ -1133,20 +1134,9 @@ static void ican3_handle_message(struct ican3_dev *mod, struct ican3_msg *msg) */ static void ican3_put_echo_skb(struct ican3_dev *mod, struct sk_buff *skb) { - struct sock *srcsk = skb->sk; - - if (atomic_read(&skb->users) != 1) { - struct sk_buff *old_skb = skb; - - skb = skb_clone(old_skb, GFP_ATOMIC); - kfree_skb(old_skb); - if (!skb) - return; - } else { - skb_orphan(skb); - } - - skb->sk = srcsk; + skb = can_create_echo_skb(skb); + if (!skb) + return; /* save this skb for tx interrupt echo handling */ skb_queue_tail(&mod->echoq, skb); @@ -1322,7 +1312,7 @@ static int ican3_napi(struct napi_struct *napi, int budget) /* process all communication messages */ while (true) { - struct ican3_msg msg; + struct ican3_msg uninitialized_var(msg); ret = ican3_recv_msg(mod, &msg); if (ret) break; diff --git a/drivers/net/can/vcan.c b/drivers/net/can/vcan.c index 0a2a5ee79a1..4e94057ef5c 100644 --- a/drivers/net/can/vcan.c +++ b/drivers/net/can/vcan.c @@ -46,6 +46,7 @@ #include <linux/if_ether.h> #include <linux/can.h> #include <linux/can/dev.h> +#include <linux/can/skb.h> #include <linux/slab.h> #include <net/rtnetlink.h> @@ -109,25 +110,23 @@ static netdev_tx_t vcan_tx(struct sk_buff *skb, struct net_device *dev) stats->rx_packets++; stats->rx_bytes += cfd->len; } - kfree_skb(skb); + consume_skb(skb); return NETDEV_TX_OK; } /* perform standard echo handling for CAN network interfaces */ if (loop) { - struct sock *srcsk = skb->sk; - skb = skb_share_check(skb, GFP_ATOMIC); + skb = can_create_echo_skb(skb); if (!skb) return NETDEV_TX_OK; /* receive with packet counting */ - skb->sk = srcsk; vcan_rx(skb, dev); } else { /* no looped packets => no counting */ - kfree_skb(skb); + consume_skb(skb); } return NETDEV_TX_OK; } diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c index 0f4241c6e97..238ccea965c 100644 --- a/drivers/net/ethernet/3com/3c59x.c +++ b/drivers/net/ethernet/3com/3c59x.c @@ -3294,7 +3294,6 @@ static int __init vortex_init(void) static void __exit vortex_eisa_cleanup(void) { - struct vortex_private *vp; void __iomem *ioaddr; #ifdef CONFIG_EISA @@ -3303,7 +3302,6 @@ static void __exit vortex_eisa_cleanup(void) #endif if (compaq_net_device) { - vp = netdev_priv(compaq_net_device); ioaddr = ioport_map(compaq_net_device->base_addr, VORTEX_TOTAL_SIZE); diff --git a/drivers/net/ethernet/allwinner/sun4i-emac.c b/drivers/net/ethernet/allwinner/sun4i-emac.c index 0cc21437478..511f6eecd58 100644 --- a/drivers/net/ethernet/allwinner/sun4i-emac.c +++ b/drivers/net/ethernet/allwinner/sun4i-emac.c @@ -929,6 +929,9 @@ static int emac_resume(struct platform_device *dev) } static const struct of_device_id emac_of_match[] = { + {.compatible = "allwinner,sun4i-a10-emac",}, + + /* Deprecated */ {.compatible = "allwinner,sun4i-emac",}, {}, }; diff --git a/drivers/net/ethernet/atheros/alx/main.c b/drivers/net/ethernet/atheros/alx/main.c index e92ffd6e1c1..2e45f6ec1bf 100644 --- a/drivers/net/ethernet/atheros/alx/main.c +++ b/drivers/net/ethernet/atheros/alx/main.c @@ -1292,6 +1292,7 @@ static int alx_probe(struct pci_dev *pdev, const struct pci_device_id *ent) alx = netdev_priv(netdev); spin_lock_init(&alx->hw.mdio_lock); spin_lock_init(&alx->irq_lock); + spin_lock_init(&alx->stats_lock); alx->dev = netdev; alx->hw.pdev = pdev; alx->msg_enable = NETIF_MSG_LINK | NETIF_MSG_HW | NETIF_MSG_IFUP | diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 9d2dedadf2d..cda25ac45b4 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -85,7 +85,7 @@ MODULE_FIRMWARE(FW_RV2P_FILE_09_Ax); static int disable_msi = 0; -module_param(disable_msi, int, 0); +module_param(disable_msi, int, S_IRUGO); MODULE_PARM_DESC(disable_msi, "Disable Message Signaled Interrupt (MSI)"); typedef enum { diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 17d1689aec6..bfc58d488bb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -936,7 +936,7 @@ static inline int bnx2x_func_start(struct bnx2x *bp) else /* CHIP_IS_E1X */ start_params->network_cos_mode = FW_WRR; - start_params->gre_tunnel_mode = IPGRE_TUNNEL; + start_params->gre_tunnel_mode = L2GRE_TUNNEL; start_params->gre_tunnel_rss = GRE_INNER_HEADERS_RSS; return bnx2x_func_state_change(bp, &func_params); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index c9c445e7b4a..7d438228645 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -95,29 +95,29 @@ MODULE_FIRMWARE(FW_FILE_NAME_E1H); MODULE_FIRMWARE(FW_FILE_NAME_E2); int bnx2x_num_queues; -module_param_named(num_queues, bnx2x_num_queues, int, 0); +module_param_named(num_queues, bnx2x_num_queues, int, S_IRUGO); MODULE_PARM_DESC(num_queues, " Set number of queues (default is as a number of CPUs)"); static int disable_tpa; -module_param(disable_tpa, int, 0); +module_param(disable_tpa, int, S_IRUGO); MODULE_PARM_DESC(disable_tpa, " Disable the TPA (LRO) feature"); static int int_mode; -module_param(int_mode, int, 0); +module_param(int_mode, int, S_IRUGO); MODULE_PARM_DESC(int_mode, " Force interrupt mode other than MSI-X " "(1 INT#x; 2 MSI)"); static int dropless_fc; -module_param(dropless_fc, int, 0); +module_param(dropless_fc, int, S_IRUGO); MODULE_PARM_DESC(dropless_fc, " Pause on exhausted host ring"); static int mrrs = -1; -module_param(mrrs, int, 0); +module_param(mrrs, int, S_IRUGO); MODULE_PARM_DESC(mrrs, " Force Max Read Req Size (0..3) (for debug)"); static int debug; -module_param(debug, int, 0); +module_param(debug, int, S_IRUGO); MODULE_PARM_DESC(debug, " Default debug msglevel"); struct workqueue_struct *bnx2x_wq; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c index aec5ef2ed7c..e42f48df6e9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c @@ -1446,12 +1446,12 @@ static void bnx2x_vf_igu_reset(struct bnx2x *bp, struct bnx2x_virtf *vf) if (vf->cfg_flags & VF_CFG_INT_SIMD) val |= IGU_VF_CONF_SINGLE_ISR_EN; val &= ~IGU_VF_CONF_PARENT_MASK; - val |= BP_FUNC(bp) << IGU_VF_CONF_PARENT_SHIFT; /* parent PF */ + val |= (BP_ABS_FUNC(bp) >> 1) << IGU_VF_CONF_PARENT_SHIFT; REG_WR(bp, IGU_REG_VF_CONFIGURATION, val); DP(BNX2X_MSG_IOV, - "value in IGU_REG_VF_CONFIGURATION of vf %d after write %x\n", - vf->abs_vfid, REG_RD(bp, IGU_REG_VF_CONFIGURATION)); + "value in IGU_REG_VF_CONFIGURATION of vf %d after write is 0x%08x\n", + vf->abs_vfid, val); bnx2x_pretend_func(bp, BP_ABS_FUNC(bp)); diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index e2ca03e23dc..3167ed6593b 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -2609,13 +2609,14 @@ static int tg3_phy_reset_5703_4_5(struct tg3 *tp) tg3_writephy(tp, MII_CTRL1000, phy9_orig); - if (!tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32)) { - reg32 &= ~0x3000; - tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32); - } else if (!err) - err = -EBUSY; + err = tg3_readphy(tp, MII_TG3_EXT_CTRL, ®32); + if (err) + return err; - return err; + reg32 &= ~0x3000; + tg3_writephy(tp, MII_TG3_EXT_CTRL, reg32); + + return 0; } static void tg3_carrier_off(struct tg3 *tp) @@ -14113,12 +14114,12 @@ static int tg3_change_mtu(struct net_device *dev, int new_mtu) tg3_netif_stop(tp); + tg3_set_mtu(dev, tp, new_mtu); + tg3_full_lock(tp, 1); tg3_halt(tp, RESET_KIND_SHUTDOWN, 1); - tg3_set_mtu(dev, tp, new_mtu); - /* Reset PHY, otherwise the read DMA engine will be in a mode that * breaks all requests to 256 bytes. */ diff --git a/drivers/net/ethernet/ethoc.c b/drivers/net/ethernet/ethoc.c index 4de8cfd149c..55e0fa03dc9 100644 --- a/drivers/net/ethernet/ethoc.c +++ b/drivers/net/ethernet/ethoc.c @@ -13,6 +13,7 @@ #include <linux/dma-mapping.h> #include <linux/etherdevice.h> +#include <linux/clk.h> #include <linux/crc32.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -51,6 +52,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); #define ETH_HASH0 0x48 #define ETH_HASH1 0x4c #define ETH_TXCTRL 0x50 +#define ETH_END 0x54 /* mode register */ #define MODER_RXEN (1 << 0) /* receive enable */ @@ -179,6 +181,7 @@ MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size"); * @membase: pointer to buffer memory region * @dma_alloc: dma allocated buffer size * @io_region_size: I/O memory region size + * @num_bd: number of buffer descriptors * @num_tx: number of send buffers * @cur_tx: last send buffer written * @dty_tx: last buffer actually sent @@ -199,6 +202,7 @@ struct ethoc { int dma_alloc; resource_size_t io_region_size; + unsigned int num_bd; unsigned int num_tx; unsigned int cur_tx; unsigned int dty_tx; @@ -216,6 +220,7 @@ struct ethoc { struct phy_device *phy; struct mii_bus *mdio; + struct clk *clk; s8 phy_id; }; @@ -688,6 +693,11 @@ static int ethoc_mdio_probe(struct net_device *dev) } priv->phy = phy; + phy->advertising &= ~(ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseT_Half); + phy->supported &= ~(SUPPORTED_1000baseT_Full | + SUPPORTED_1000baseT_Half); + return 0; } @@ -890,6 +900,102 @@ out: return NETDEV_TX_OK; } +static int ethoc_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ethoc *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phy; + + if (!phydev) + return -EOPNOTSUPP; + + return phy_ethtool_gset(phydev, cmd); +} + +static int ethoc_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + struct ethoc *priv = netdev_priv(dev); + struct phy_device *phydev = priv->phy; + + if (!phydev) + return -EOPNOTSUPP; + + return phy_ethtool_sset(phydev, cmd); +} + +static int ethoc_get_regs_len(struct net_device *netdev) +{ + return ETH_END; +} + +static void ethoc_get_regs(struct net_device *dev, struct ethtool_regs *regs, + void *p) +{ + struct ethoc *priv = netdev_priv(dev); + u32 *regs_buff = p; + unsigned i; + + regs->version = 0; + for (i = 0; i < ETH_END / sizeof(u32); ++i) + regs_buff[i] = ethoc_read(priv, i * sizeof(u32)); +} + +static void ethoc_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *ring) +{ + struct ethoc *priv = netdev_priv(dev); + + ring->rx_max_pending = priv->num_bd - 1; + ring->rx_mini_max_pending = 0; + ring->rx_jumbo_max_pending = 0; + ring->tx_max_pending = priv->num_bd - 1; + + ring->rx_pending = priv->num_rx; + ring->rx_mini_pending = 0; + ring->rx_jumbo_pending = 0; + ring->tx_pending = priv->num_tx; +} + +static int ethoc_set_ringparam(struct net_device *dev, + struct ethtool_ringparam *ring) +{ + struct ethoc *priv = netdev_priv(dev); + + if (ring->tx_pending < 1 || ring->rx_pending < 1 || + ring->tx_pending + ring->rx_pending > priv->num_bd) + return -EINVAL; + if (ring->rx_mini_pending || ring->rx_jumbo_pending) + return -EINVAL; + + if (netif_running(dev)) { + netif_tx_disable(dev); + ethoc_disable_rx_and_tx(priv); + ethoc_disable_irq(priv, INT_MASK_TX | INT_MASK_RX); + synchronize_irq(dev->irq); + } + + priv->num_tx = rounddown_pow_of_two(ring->tx_pending); + priv->num_rx = ring->rx_pending; + ethoc_init_ring(priv, dev->mem_start); + + if (netif_running(dev)) { + ethoc_enable_irq(priv, INT_MASK_TX | INT_MASK_RX); + ethoc_enable_rx_and_tx(priv); + netif_wake_queue(dev); + } + return 0; +} + +const struct ethtool_ops ethoc_ethtool_ops = { + .get_settings = ethoc_get_settings, + .set_settings = ethoc_set_settings, + .get_regs_len = ethoc_get_regs_len, + .get_regs = ethoc_get_regs, + .get_link = ethtool_op_get_link, + .get_ringparam = ethoc_get_ringparam, + .set_ringparam = ethoc_set_ringparam, + .get_ts_info = ethtool_op_get_ts_info, +}; + static const struct net_device_ops ethoc_netdev_ops = { .ndo_open = ethoc_open, .ndo_stop = ethoc_stop, @@ -917,6 +1023,8 @@ static int ethoc_probe(struct platform_device *pdev) int num_bd; int ret = 0; bool random_mac = false; + struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 eth_clkfreq = pdata ? pdata->eth_clkfreq : 0; /* allocate networking device */ netdev = alloc_etherdev(sizeof(struct ethoc)); @@ -1016,6 +1124,7 @@ static int ethoc_probe(struct platform_device *pdev) ret = -ENODEV; goto error; } + priv->num_bd = num_bd; /* num_tx must be a power of two */ priv->num_tx = rounddown_pow_of_two(num_bd >> 1); priv->num_rx = num_bd - priv->num_tx; @@ -1030,8 +1139,7 @@ static int ethoc_probe(struct platform_device *pdev) } /* Allow the platform setup code to pass in a MAC address. */ - if (dev_get_platdata(&pdev->dev)) { - struct ethoc_platform_data *pdata = dev_get_platdata(&pdev->dev); + if (pdata) { memcpy(netdev->dev_addr, pdata->hwaddr, IFHWADDRLEN); priv->phy_id = pdata->phy_id; } else { @@ -1069,6 +1177,27 @@ static int ethoc_probe(struct platform_device *pdev) if (random_mac) netdev->addr_assign_type = NET_ADDR_RANDOM; + /* Allow the platform setup code to adjust MII management bus clock. */ + if (!eth_clkfreq) { + struct clk *clk = devm_clk_get(&pdev->dev, NULL); + + if (!IS_ERR(clk)) { + priv->clk = clk; + clk_prepare_enable(clk); + eth_clkfreq = clk_get_rate(clk); + } + } + if (eth_clkfreq) { + u32 clkdiv = MIIMODER_CLKDIV(eth_clkfreq / 2500000 + 1); + + if (!clkdiv) + clkdiv = 2; + dev_dbg(&pdev->dev, "setting MII clkdiv to %u\n", clkdiv); + ethoc_write(priv, MIIMODER, + (ethoc_read(priv, MIIMODER) & MIIMODER_NOPRE) | + clkdiv); + } + /* register MII bus */ priv->mdio = mdiobus_alloc(); if (!priv->mdio) { @@ -1111,6 +1240,7 @@ static int ethoc_probe(struct platform_device *pdev) netdev->netdev_ops = ðoc_netdev_ops; netdev->watchdog_timeo = ETHOC_TIMEOUT; netdev->features |= 0; + netdev->ethtool_ops = ðoc_ethtool_ops; /* setup NAPI */ netif_napi_add(netdev, &priv->napi, ethoc_poll, 64); @@ -1133,6 +1263,8 @@ free_mdio: kfree(priv->mdio->irq); mdiobus_free(priv->mdio); free: + if (priv->clk) + clk_disable_unprepare(priv->clk); free_netdev(netdev); out: return ret; @@ -1157,6 +1289,8 @@ static int ethoc_remove(struct platform_device *pdev) kfree(priv->mdio->irq); mdiobus_free(priv->mdio); } + if (priv->clk) + clk_disable_unprepare(priv->clk); unregister_netdev(netdev); free_netdev(netdev); } diff --git a/drivers/net/ethernet/intel/e100.c b/drivers/net/ethernet/intel/e100.c index cbaba4442d4..bf7a01ef9a5 100644 --- a/drivers/net/ethernet/intel/e100.c +++ b/drivers/net/ethernet/intel/e100.c @@ -3034,7 +3034,7 @@ static void __e100_shutdown(struct pci_dev *pdev, bool *enable_wake) *enable_wake = false; } - pci_disable_device(pdev); + pci_clear_master(pdev); } static int __e100_power_off(struct pci_dev *pdev, bool wake) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.c b/drivers/net/ethernet/neterion/vxge/vxge-main.c index 1ded50ca160..e46e8698e63 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.c +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.c @@ -726,9 +726,6 @@ static int vxge_learn_mac(struct vxgedev *vdev, u8 *mac_header) int vpath_idx = 0; enum vxge_hw_status status = VXGE_HW_OK; struct vxge_vpath *vpath = NULL; - struct __vxge_hw_device *hldev; - - hldev = pci_get_drvdata(vdev->pdev); mac_address = (u8 *)&mac_addr; memcpy(mac_address, mac_header, ETH_ALEN); @@ -2443,9 +2440,6 @@ static void vxge_rem_msix_isr(struct vxgedev *vdev) static void vxge_rem_isr(struct vxgedev *vdev) { - struct __vxge_hw_device *hldev; - hldev = pci_get_drvdata(vdev->pdev); - #ifdef CONFIG_PCI_MSI if (vdev->config.intr_type == MSI_X) { vxge_rem_msix_isr(vdev); diff --git a/drivers/net/ethernet/sfc/tx.c b/drivers/net/ethernet/sfc/tx.c index c49d1fb1696..75d11fa4eb0 100644 --- a/drivers/net/ethernet/sfc/tx.c +++ b/drivers/net/ethernet/sfc/tx.c @@ -429,7 +429,9 @@ netdev_tx_t efx_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb) } /* Transfer ownership of the skb to the final buffer */ +#ifdef EFX_USE_PIO finish_packet: +#endif buffer->skb = skb; buffer->flags = EFX_TX_BUF_SKB | dma_flags; diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c index bde63e3af96..1d860ce914e 100644 --- a/drivers/net/ethernet/ti/cpsw.c +++ b/drivers/net/ethernet/ti/cpsw.c @@ -1878,8 +1878,18 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data, mdio_node = of_find_node_by_phandle(be32_to_cpup(parp)); phyid = be32_to_cpup(parp+1); mdio = of_find_device_by_node(mdio_node); - snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), - PHY_ID_FMT, mdio->name, phyid); + + if (strncmp(mdio->name, "gpio", 4) == 0) { + /* GPIO bitbang MDIO driver attached */ + struct mii_bus *bus = dev_get_drvdata(&mdio->dev); + + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, bus->id, phyid); + } else { + /* davinci MDIO driver attached */ + snprintf(slave_data->phy_id, sizeof(slave_data->phy_id), + PHY_ID_FMT, mdio->name, phyid); + } mac_addr = of_get_mac_address(slave_node); if (mac_addr) diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index 2dc82f1d2e7..3da44d5d914 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -210,13 +210,6 @@ config KINGSUN_DONGLE To compile it as a module, choose M here: the module will be called kingsun-sir. -config EP7211_DONGLE - tristate "Cirrus Logic clps711x I/R support" - depends on IRTTY_SIR && ARCH_CLPS711X && IRDA - help - Say Y here if you want to build support for the Cirrus logic - EP7211 chipset's infrared module. - config KSDAZZLE_DONGLE tristate "KingSun Dazzle IrDA-USB dongle" depends on IRDA && USB diff --git a/drivers/net/irda/Makefile b/drivers/net/irda/Makefile index dfc64537f62..be8ab5b9a4a 100644 --- a/drivers/net/irda/Makefile +++ b/drivers/net/irda/Makefile @@ -35,7 +35,6 @@ obj-$(CONFIG_MCP2120_DONGLE) += mcp2120-sir.o obj-$(CONFIG_ACT200L_DONGLE) += act200l-sir.o obj-$(CONFIG_MA600_DONGLE) += ma600-sir.o obj-$(CONFIG_TOIM3232_DONGLE) += toim3232-sir.o -obj-$(CONFIG_EP7211_DONGLE) += ep7211-sir.o obj-$(CONFIG_KINGSUN_DONGLE) += kingsun-sir.o obj-$(CONFIG_KSDAZZLE_DONGLE) += ksdazzle-sir.o obj-$(CONFIG_KS959_DONGLE) += ks959-sir.o diff --git a/drivers/net/irda/ep7211-sir.c b/drivers/net/irda/ep7211-sir.c deleted file mode 100644 index 5fe1f4dd336..00000000000 --- a/drivers/net/irda/ep7211-sir.c +++ /dev/null @@ -1,70 +0,0 @@ -/* - * IR port driver for the Cirrus Logic CLPS711X processors - * - * Copyright 2001, Blue Mug Inc. All rights reserved. - * Copyright 2007, Samuel Ortiz <samuel@sortiz.org> - */ - -#include <linux/module.h> -#include <linux/platform_device.h> - -#include <mach/hardware.h> - -#include "sir-dev.h" - -static int clps711x_dongle_open(struct sir_dev *dev) -{ - unsigned int syscon; - - /* Turn on the SIR encoder. */ - syscon = clps_readl(SYSCON1); - syscon |= SYSCON1_SIREN; - clps_writel(syscon, SYSCON1); - - return 0; -} - -static int clps711x_dongle_close(struct sir_dev *dev) -{ - unsigned int syscon; - - /* Turn off the SIR encoder. */ - syscon = clps_readl(SYSCON1); - syscon &= ~SYSCON1_SIREN; - clps_writel(syscon, SYSCON1); - - return 0; -} - -static struct dongle_driver clps711x_dongle = { - .owner = THIS_MODULE, - .driver_name = "EP7211 IR driver", - .type = IRDA_EP7211_DONGLE, - .open = clps711x_dongle_open, - .close = clps711x_dongle_close, -}; - -static int clps711x_sir_probe(struct platform_device *pdev) -{ - return irda_register_dongle(&clps711x_dongle); -} - -static int clps711x_sir_remove(struct platform_device *pdev) -{ - return irda_unregister_dongle(&clps711x_dongle); -} - -static struct platform_driver clps711x_sir_driver = { - .driver = { - .name = "sir-clps711x", - .owner = THIS_MODULE, - }, - .probe = clps711x_sir_probe, - .remove = clps711x_sir_remove, -}; -module_platform_driver(clps711x_sir_driver); - -MODULE_AUTHOR("Samuel Ortiz <samuel@sortiz.org>"); -MODULE_DESCRIPTION("EP7211 IR dongle driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("irda-dongle-13"); /* IRDA_EP7211_DONGLE */ diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c index 547725fa867..9414fa27216 100644 --- a/drivers/net/phy/dp83640.c +++ b/drivers/net/phy/dp83640.c @@ -437,7 +437,10 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp, if (on) { gpio_num = gpio_tab[EXTTS0_GPIO + index]; evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT; - evnt |= EVNT_RISE; + if (rq->extts.flags & PTP_FALLING_EDGE) + evnt |= EVNT_FALL; + else + evnt |= EVNT_RISE; } ext_write(0, phydev, PAGE5, PTP_EVNT, evnt); return 0; @@ -1058,6 +1061,13 @@ static void dp83640_remove(struct phy_device *phydev) kfree(dp83640); } +static int dp83640_config_init(struct phy_device *phydev) +{ + enable_status_frames(phydev, true); + ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); + return 0; +} + static int dp83640_ack_interrupt(struct phy_device *phydev) { int err = phy_read(phydev, MII_DP83640_MISR); @@ -1195,11 +1205,6 @@ static int dp83640_hwtstamp(struct phy_device *phydev, struct ifreq *ifr) mutex_lock(&dp83640->clock->extreg_lock); - if (dp83640->hwts_tx_en || dp83640->hwts_rx_en) { - enable_status_frames(phydev, true); - ext_write(0, phydev, PAGE4, PTP_CTL, PTP_ENABLE); - } - ext_write(0, phydev, PAGE5, PTP_TXCFG0, txcfg0); ext_write(0, phydev, PAGE5, PTP_RXCFG0, rxcfg0); @@ -1281,6 +1286,7 @@ static void dp83640_txtstamp(struct phy_device *phydev, } /* fall through */ case HWTSTAMP_TX_ON: + skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS; skb_queue_tail(&dp83640->tx_queue, skb); schedule_work(&dp83640->ts_work); break; @@ -1330,6 +1336,7 @@ static struct phy_driver dp83640_driver = { .flags = PHY_HAS_INTERRUPT, .probe = dp83640_probe, .remove = dp83640_remove, + .config_init = dp83640_config_init, .config_aneg = genphy_config_aneg, .read_status = genphy_read_status, .ack_interrupt = dp83640_ack_interrupt, diff --git a/drivers/net/phy/mdio-sun4i.c b/drivers/net/phy/mdio-sun4i.c index bb88bc7d81f..9367acc84fb 100644 --- a/drivers/net/phy/mdio-sun4i.c +++ b/drivers/net/phy/mdio-sun4i.c @@ -170,6 +170,9 @@ static int sun4i_mdio_remove(struct platform_device *pdev) } static const struct of_device_id sun4i_mdio_dt_ids[] = { + { .compatible = "allwinner,sun4i-a10-mdio" }, + + /* Deprecated */ { .compatible = "allwinner,sun4i-mdio" }, { } }; diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 4b03e63639b..82514e72b3d 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -719,7 +719,7 @@ int phy_resume(struct phy_device *phydev) static int genphy_config_advert(struct phy_device *phydev) { u32 advertise; - int oldadv, adv; + int oldadv, adv, bmsr; int err, changed = 0; /* Only allow advertising what this PHY supports */ @@ -744,26 +744,36 @@ static int genphy_config_advert(struct phy_device *phydev) changed = 1; } + bmsr = phy_read(phydev, MII_BMSR); + if (bmsr < 0) + return bmsr; + + /* Per 802.3-2008, Section 22.2.4.2.16 Extended status all + * 1000Mbits/sec capable PHYs shall have the BMSR_ESTATEN bit set to a + * logical 1. + */ + if (!(bmsr & BMSR_ESTATEN)) + return changed; + /* Configure gigabit if it's supported */ + adv = phy_read(phydev, MII_CTRL1000); + if (adv < 0) + return adv; + + oldadv = adv; + adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); + if (phydev->supported & (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full)) { - adv = phy_read(phydev, MII_CTRL1000); - if (adv < 0) - return adv; - - oldadv = adv; - adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF); adv |= ethtool_adv_to_mii_ctrl1000_t(advertise); - - if (adv != oldadv) { - err = phy_write(phydev, MII_CTRL1000, adv); - - if (err < 0) - return err; + if (adv != oldadv) changed = 1; - } } + err = phy_write(phydev, MII_CTRL1000, adv); + if (err < 0) + return err; + return changed; } diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 6b638a066c1..409499fdb15 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -292,6 +292,22 @@ config USB_NET_SR9700 This option adds support for CoreChip-sz SR9700 based USB 1.1 10/100 Ethernet adapters. +config USB_NET_SR9800 + tristate "CoreChip-sz SR9800 based USB 2.0 10/100 ethernet devices" + depends on USB_USBNET + select CRC32 + default y + ---help--- + Say Y if you want to use one of the following 100Mbps USB Ethernet + device based on the CoreChip-sz SR9800 chip. + + This driver makes the adapter appear as a normal Ethernet interface, + typically on eth0, if it is the only ethernet device, or perhaps on + eth1, if you have a PCI or ISA ethernet card installed. + + To compile this driver as a module, choose M here: the + module will be called sr9800. + config USB_NET_SMSC75XX tristate "SMSC LAN75XX based USB 2.0 gigabit ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index b17b5e88bba..433f0a00c68 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o r815x.o obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SR9700) += sr9700.o +obj-$(CONFIG_USB_NET_SR9800) += sr9800.o obj-$(CONFIG_USB_NET_SMSC75XX) += smsc75xx.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 1a482344b3f..660bd5ea9fc 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1201,16 +1201,18 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) struct hso_serial *serial = urb->context; int status = urb->status; + D4("\n--- Got serial_read_bulk callback %02x ---", status); + /* sanity check */ if (!serial) { D1("serial == NULL"); return; - } else if (status) { + } + if (status) { handle_usb_error(status, __func__, serial->parent); return; } - D4("\n--- Got serial_read_bulk callback %02x ---", status); D1("Actual length = %d\n", urb->actual_length); DUMP1(urb->transfer_buffer, urb->actual_length); @@ -1218,25 +1220,13 @@ static void hso_std_serial_read_bulk_callback(struct urb *urb) if (serial->port.count == 0) return; - if (status == 0) { - if (serial->parent->port_spec & HSO_INFO_CRC_BUG) - fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); - /* Valid data, handle RX data */ - spin_lock(&serial->serial_lock); - serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; - put_rxbuf_data_and_resubmit_bulk_urb(serial); - spin_unlock(&serial->serial_lock); - } else if (status == -ENOENT || status == -ECONNRESET) { - /* Unlinked - check for throttled port. */ - D2("Port %d, successfully unlinked urb", serial->minor); - spin_lock(&serial->serial_lock); - serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 0; - hso_resubmit_rx_bulk_urb(serial, urb); - spin_unlock(&serial->serial_lock); - } else { - D2("Port %d, status = %d for read urb", serial->minor, status); - return; - } + if (serial->parent->port_spec & HSO_INFO_CRC_BUG) + fix_crc_bug(urb, serial->in_endp->wMaxPacketSize); + /* Valid data, handle RX data */ + spin_lock(&serial->serial_lock); + serial->rx_urb_filled[hso_urb_to_index(serial, urb)] = 1; + put_rxbuf_data_and_resubmit_bulk_urb(serial); + spin_unlock(&serial->serial_lock); } /* diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 23bdd5b9274..ff5c87128ff 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -712,6 +712,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x1255, 3)}, {QMI_FIXED_INTF(0x19d2, 0x1255, 4)}, {QMI_FIXED_INTF(0x19d2, 0x1256, 4)}, + {QMI_FIXED_INTF(0x19d2, 0x1270, 5)}, /* ZTE MF667 */ {QMI_FIXED_INTF(0x19d2, 0x1401, 2)}, {QMI_FIXED_INTF(0x19d2, 0x1402, 2)}, /* ZTE MF60 */ {QMI_FIXED_INTF(0x19d2, 0x1424, 2)}, @@ -723,6 +724,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x1199, 0x68a2, 8)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x68a2, 19)}, /* Sierra Wireless MC7710 in QMI mode */ {QMI_FIXED_INTF(0x1199, 0x901c, 8)}, /* Sierra Wireless EM7700 */ + {QMI_FIXED_INTF(0x1199, 0x9051, 8)}, /* Netgear AirCard 340U */ {QMI_FIXED_INTF(0x1bbb, 0x011e, 4)}, /* Telekom Speedstick LTE II (Alcatel One Touch L100V LTE) */ {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c index e8fac732c6f..d89dbe395ad 100644 --- a/drivers/net/usb/r8152.c +++ b/drivers/net/usb/r8152.c @@ -2273,22 +2273,21 @@ static int rtl8152_open(struct net_device *netdev) struct r8152 *tp = netdev_priv(netdev); int res = 0; + rtl8152_set_speed(tp, AUTONEG_ENABLE, + tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, + DUPLEX_FULL); + tp->speed = 0; + netif_carrier_off(netdev); + netif_start_queue(netdev); + set_bit(WORK_ENABLE, &tp->flags); res = usb_submit_urb(tp->intr_urb, GFP_KERNEL); if (res) { if (res == -ENODEV) netif_device_detach(tp->netdev); netif_warn(tp, ifup, netdev, "intr_urb submit failed: %d\n", res); - return res; } - rtl8152_set_speed(tp, AUTONEG_ENABLE, - tp->mii.supports_gmii ? SPEED_1000 : SPEED_100, - DUPLEX_FULL); - tp->speed = 0; - netif_carrier_off(netdev); - netif_start_queue(netdev); - set_bit(WORK_ENABLE, &tp->flags); return res; } @@ -2298,8 +2297,8 @@ static int rtl8152_close(struct net_device *netdev) struct r8152 *tp = netdev_priv(netdev); int res = 0; - usb_kill_urb(tp->intr_urb); clear_bit(WORK_ENABLE, &tp->flags); + usb_kill_urb(tp->intr_urb); cancel_delayed_work_sync(&tp->schedule); netif_stop_queue(netdev); tasklet_disable(&tp->tl); diff --git a/drivers/net/usb/sr9800.c b/drivers/net/usb/sr9800.c new file mode 100644 index 00000000000..4175eb9fdec --- /dev/null +++ b/drivers/net/usb/sr9800.c @@ -0,0 +1,870 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * Based on asix_common.c, asix_devices.c + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied.* + */ + +#include <linux/module.h> +#include <linux/kmod.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/usbnet.h> +#include <linux/slab.h> +#include <linux/if_vlan.h> + +#include "sr9800.h" + +static int sr_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_read_cmd(dev, cmd, SR_REQ_RD_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static int sr_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + int err; + + err = usbnet_write_cmd(dev, cmd, SR_REQ_WR_REG, value, index, + data, size); + if ((err != size) && (err >= 0)) + err = -EINVAL; + + return err; +} + +static void +sr_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value, u16 index, + u16 size, void *data) +{ + usbnet_write_cmd_async(dev, cmd, SR_REQ_WR_REG, value, index, data, + size); +} + +static int sr_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + int offset = 0; + + while (offset + sizeof(u32) < skb->len) { + struct sk_buff *sr_skb; + u16 size; + u32 header = get_unaligned_le32(skb->data + offset); + + offset += sizeof(u32); + /* get the packet length */ + size = (u16) (header & 0x7ff); + if (size != ((~header >> 16) & 0x07ff)) { + netdev_err(dev->net, "%s : Bad Header Length\n", + __func__); + return 0; + } + + if ((size > dev->net->mtu + ETH_HLEN + VLAN_HLEN) || + (size + offset > skb->len)) { + netdev_err(dev->net, "%s : Bad RX Length %d\n", + __func__, size); + return 0; + } + sr_skb = netdev_alloc_skb_ip_align(dev->net, size); + if (!sr_skb) + return 0; + + skb_put(sr_skb, size); + memcpy(sr_skb->data, skb->data + offset, size); + usbnet_skb_return(dev, sr_skb); + + offset += (size + 1) & 0xfffe; + } + + if (skb->len != offset) { + netdev_err(dev->net, "%s : Bad SKB Length %d\n", __func__, + skb->len); + return 0; + } + + return 1; +} + +static struct sk_buff *sr_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + u32 padbytes = 0xffff0000; + u32 packet_len; + int padlen; + + padlen = ((skb->len + 4) % (dev->maxpacket - 1)) ? 0 : 4; + + if ((!skb_cloned(skb)) && ((headroom + tailroom) >= (4 + padlen))) { + if ((headroom < 4) || (tailroom < padlen)) { + skb->data = memmove(skb->head + 4, skb->data, + skb->len); + skb_set_tail_pointer(skb, skb->len); + } + } else { + struct sk_buff *skb2; + skb2 = skb_copy_expand(skb, 4, padlen, flags); + dev_kfree_skb_any(skb); + skb = skb2; + if (!skb) + return NULL; + } + + skb_push(skb, 4); + packet_len = (((skb->len - 4) ^ 0x0000ffff) << 16) + (skb->len - 4); + cpu_to_le32s(&packet_len); + skb_copy_to_linear_data(skb, &packet_len, sizeof(packet_len)); + + if (padlen) { + cpu_to_le32s(&padbytes); + memcpy(skb_tail_pointer(skb), &padbytes, sizeof(padbytes)); + skb_put(skb, sizeof(padbytes)); + } + + return skb; +} + +static void sr_status(struct usbnet *dev, struct urb *urb) +{ + struct sr9800_int_data *event; + int link; + + if (urb->actual_length < 8) + return; + + event = urb->transfer_buffer; + link = event->link & 0x01; + if (netif_carrier_ok(dev->net) != link) { + usbnet_link_change(dev, link, 1); + netdev_dbg(dev->net, "Link Status is: %d\n", link); + } + + return; +} + +static inline int sr_set_sw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable software MII access\n"); + return ret; +} + +static inline int sr_set_hw_mii(struct usbnet *dev) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to enable hardware MII access\n"); + return ret; +} + +static inline int sr_get_phy_addr(struct usbnet *dev) +{ + u8 buf[2]; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_PHY_ID, 0, 0, 2, buf); + if (ret < 0) { + netdev_err(dev->net, "%s : Error reading PHYID register:%02x\n", + __func__, ret); + goto out; + } + netdev_dbg(dev->net, "%s : returning 0x%04x\n", __func__, + *((__le16 *)buf)); + + ret = buf[1]; + +out: + return ret; +} + +static int sr_sw_reset(struct usbnet *dev, u8 flags) +{ + int ret; + + ret = sr_write_cmd(dev, SR_CMD_SW_RESET, flags, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to send software reset:%02x\n", + ret); + + return ret; +} + +static u16 sr_read_rx_ctl(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_RX_CTL, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, "Error reading RX_CTL register:%02x\n", + ret); + goto out; + } + + ret = le16_to_cpu(v); +out: + return ret; +} + +static int sr_write_rx_ctl(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write RX_CTL mode to 0x%04x:%02x\n", + mode, ret); + + return ret; +} + +static u16 sr_read_medium_status(struct usbnet *dev) +{ + __le16 v; + int ret; + + ret = sr_read_cmd(dev, SR_CMD_READ_MEDIUM_STATUS, 0, 0, 2, &v); + if (ret < 0) { + netdev_err(dev->net, + "Error reading Medium Status register:%02x\n", ret); + return ret; /* TODO: callers not checking for error ret */ + } + + return le16_to_cpu(v); +} + +static int sr_write_medium_mode(struct usbnet *dev, u16 mode) +{ + int ret; + + netdev_dbg(dev->net, "%s : mode = 0x%04x\n", __func__, mode); + ret = sr_write_cmd(dev, SR_CMD_WRITE_MEDIUM_MODE, mode, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, + "Failed to write Medium Mode mode to 0x%04x:%02x\n", + mode, ret); + return ret; +} + +static int sr_write_gpio(struct usbnet *dev, u16 value, int sleep) +{ + int ret; + + netdev_dbg(dev->net, "%s : value = 0x%04x\n", __func__, value); + ret = sr_write_cmd(dev, SR_CMD_WRITE_GPIOS, value, 0, 0, NULL); + if (ret < 0) + netdev_err(dev->net, "Failed to write GPIO value 0x%04x:%02x\n", + value, ret); + if (sleep) + msleep(sleep); + + return ret; +} + +/* SR9800 have a 16-bit RX_CTL value */ +static void sr_set_multicast(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + u16 rx_ctl = SR_DEFAULT_RX_CTL; + + if (net->flags & IFF_PROMISC) { + rx_ctl |= SR_RX_CTL_PRO; + } else if (net->flags & IFF_ALLMULTI || + netdev_mc_count(net) > SR_MAX_MCAST) { + rx_ctl |= SR_RX_CTL_AMALL; + } else if (netdev_mc_empty(net)) { + /* just broadcast and directed */ + } else { + /* We use the 20 byte dev->data + * for our 8 byte filter buffer + * to avoid allocating memory that + * is tricky to free later + */ + struct netdev_hw_addr *ha; + u32 crc_bits; + + memset(data->multi_filter, 0, SR_MCAST_FILTER_SIZE); + + /* Build the multicast hash filter. */ + netdev_for_each_mc_addr(ha, net) { + crc_bits = ether_crc(ETH_ALEN, ha->addr) >> 26; + data->multi_filter[crc_bits >> 3] |= + 1 << (crc_bits & 7); + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_MULTI_FILTER, 0, 0, + SR_MCAST_FILTER_SIZE, data->multi_filter); + + rx_ctl |= SR_RX_CTL_AM; + } + + sr_write_cmd_async(dev, SR_CMD_WRITE_RX_CTL, rx_ctl, 0, 0, NULL); +} + +static int sr_mdio_read(struct net_device *net, int phy_id, int loc) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res; + + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_read_cmd(dev, SR_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", __func__, + phy_id, loc, le16_to_cpu(res)); + + return le16_to_cpu(res); +} + +static void +sr_mdio_write(struct net_device *net, int phy_id, int loc, int val) +{ + struct usbnet *dev = netdev_priv(net); + __le16 res = cpu_to_le16(val); + + netdev_dbg(dev->net, + "%s : phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", __func__, + phy_id, loc, val); + mutex_lock(&dev->phy_mutex); + sr_set_sw_mii(dev); + sr_write_cmd(dev, SR_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, &res); + sr_set_hw_mii(dev); + mutex_unlock(&dev->phy_mutex); +} + +/* Get the PHY Identifier from the PHYSID1 & PHYSID2 MII registers */ +static u32 sr_get_phyid(struct usbnet *dev) +{ + int phy_reg; + u32 phy_id; + int i; + + /* Poll for the rare case the FW or phy isn't ready yet. */ + for (i = 0; i < 100; i++) { + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID1); + if (phy_reg != 0 && phy_reg != 0xFFFF) + break; + mdelay(1); + } + + if (phy_reg <= 0 || phy_reg == 0xFFFF) + return 0; + + phy_id = (phy_reg & 0xffff) << 16; + + phy_reg = sr_mdio_read(dev->net, dev->mii.phy_id, MII_PHYSID2); + if (phy_reg < 0) + return 0; + + phy_id |= (phy_reg & 0xffff); + + return phy_id; +} + +static void +sr_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt; + + if (sr_read_cmd(dev, SR_CMD_READ_MONITOR_MODE, 0, 0, 1, &opt) < 0) { + wolinfo->supported = 0; + wolinfo->wolopts = 0; + return; + } + wolinfo->supported = WAKE_PHY | WAKE_MAGIC; + wolinfo->wolopts = 0; + if (opt & SR_MONITOR_LINK) + wolinfo->wolopts |= WAKE_PHY; + if (opt & SR_MONITOR_MAGIC) + wolinfo->wolopts |= WAKE_MAGIC; +} + +static int +sr_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo) +{ + struct usbnet *dev = netdev_priv(net); + u8 opt = 0; + + if (wolinfo->wolopts & WAKE_PHY) + opt |= SR_MONITOR_LINK; + if (wolinfo->wolopts & WAKE_MAGIC) + opt |= SR_MONITOR_MAGIC; + + if (sr_write_cmd(dev, SR_CMD_WRITE_MONITOR_MODE, + opt, 0, 0, NULL) < 0) + return -EINVAL; + + return 0; +} + +static int sr_get_eeprom_len(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + return data->eeprom_len; +} + +static int sr_get_eeprom(struct net_device *net, + struct ethtool_eeprom *eeprom, u8 *data) +{ + struct usbnet *dev = netdev_priv(net); + __le16 *ebuf = (__le16 *)data; + int ret; + int i; + + /* Crude hack to ensure that we don't overwrite memory + * if an odd length is supplied + */ + if (eeprom->len % 2) + return -EINVAL; + + eeprom->magic = SR_EEPROM_MAGIC; + + /* sr9800 returns 2 bytes from eeprom on read */ + for (i = 0; i < eeprom->len / 2; i++) { + ret = sr_read_cmd(dev, SR_CMD_READ_EEPROM, eeprom->offset + i, + 0, 2, &ebuf[i]); + if (ret < 0) + return -EINVAL; + } + return 0; +} + +static void sr_get_drvinfo(struct net_device *net, + struct ethtool_drvinfo *info) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + + /* Inherit standard device info */ + usbnet_get_drvinfo(net, info); + strncpy(info->driver, DRIVER_NAME, sizeof(info->driver)); + strncpy(info->version, DRIVER_VERSION, sizeof(info->version)); + info->eedump_len = data->eeprom_len; +} + +static u32 sr_get_link(struct net_device *net) +{ + struct usbnet *dev = netdev_priv(net); + + return mii_link_ok(&dev->mii); +} + +static int sr_ioctl(struct net_device *net, struct ifreq *rq, int cmd) +{ + struct usbnet *dev = netdev_priv(net); + + return generic_mii_ioctl(&dev->mii, if_mii(rq), cmd, NULL); +} + +static int sr_set_mac_address(struct net_device *net, void *p) +{ + struct usbnet *dev = netdev_priv(net); + struct sr_data *data = (struct sr_data *)&dev->data; + struct sockaddr *addr = p; + + if (netif_running(net)) + return -EBUSY; + if (!is_valid_ether_addr(addr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(net->dev_addr, addr->sa_data, ETH_ALEN); + + /* We use the 20 byte dev->data + * for our 6 byte mac buffer + * to avoid allocating memory that + * is tricky to free later + */ + memcpy(data->mac_addr, addr->sa_data, ETH_ALEN); + sr_write_cmd_async(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + + return 0; +} + +static const struct ethtool_ops sr9800_ethtool_ops = { + .get_drvinfo = sr_get_drvinfo, + .get_link = sr_get_link, + .get_msglevel = usbnet_get_msglevel, + .set_msglevel = usbnet_set_msglevel, + .get_wol = sr_get_wol, + .set_wol = sr_set_wol, + .get_eeprom_len = sr_get_eeprom_len, + .get_eeprom = sr_get_eeprom, + .get_settings = usbnet_get_settings, + .set_settings = usbnet_set_settings, + .nway_reset = usbnet_nway_reset, +}; + +static int sr9800_link_reset(struct usbnet *dev) +{ + struct ethtool_cmd ecmd = { .cmd = ETHTOOL_GSET }; + u16 mode; + + mii_check_media(&dev->mii, 1, 1); + mii_ethtool_gset(&dev->mii, &ecmd); + mode = SR9800_MEDIUM_DEFAULT; + + if (ethtool_cmd_speed(&ecmd) != SPEED_100) + mode &= ~SR_MEDIUM_PS; + + if (ecmd.duplex != DUPLEX_FULL) + mode &= ~SR_MEDIUM_FD; + + netdev_dbg(dev->net, "%s : speed: %u duplex: %d mode: 0x%04x\n", + __func__, ethtool_cmd_speed(&ecmd), ecmd.duplex, mode); + + sr_write_medium_mode(dev, mode); + + return 0; +} + + +static int sr9800_set_default_mode(struct usbnet *dev) +{ + u16 rx_ctl; + int ret; + + sr_mdio_write(dev->net, dev->mii.phy_id, MII_BMCR, BMCR_RESET); + sr_mdio_write(dev->net, dev->mii.phy_id, MII_ADVERTISE, + ADVERTISE_ALL | ADVERTISE_CSMA); + mii_nway_restart(&dev->mii); + + ret = sr_write_medium_mode(dev, SR9800_MEDIUM_DEFAULT); + if (ret < 0) + goto out; + + ret = sr_write_cmd(dev, SR_CMD_WRITE_IPG012, + SR9800_IPG0_DEFAULT | SR9800_IPG1_DEFAULT, + SR9800_IPG2_DEFAULT, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Write IPG,IPG1,IPG2 failed: %d\n", ret); + goto out; + } + + /* Set RX_CTL to default values with 2k buffer, and enable cactus */ + ret = sr_write_rx_ctl(dev, SR_DEFAULT_RX_CTL); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after all initializations\n", + rx_ctl); + + rx_ctl = sr_read_medium_status(dev); + netdev_dbg(dev->net, "Medium Status:0x%04x after all initializations\n", + rx_ctl); + + return 0; +out: + return ret; +} + +static int sr9800_reset(struct usbnet *dev) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + int ret, embd_phy; + u16 rx_ctl; + + ret = sr_write_gpio(dev, + SR_GPIO_RSE | SR_GPIO_GPO_2 | SR_GPIO_GPO2EN, 5); + if (ret < 0) + goto out; + + embd_phy = ((sr_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); + + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + goto out; + } + + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) + goto out; + + msleep(150); + + if (embd_phy) { + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) + goto out; + } else { + ret = sr_sw_reset(dev, SR_SWRESET_PRTE); + if (ret < 0) + goto out; + } + + msleep(150); + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + ret = sr_sw_reset(dev, SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr_sw_reset(dev, SR_SWRESET_IPRL | SR_SWRESET_PRL); + if (ret < 0) + goto out; + + msleep(150); + + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + /* Rewrite MAC address */ + memcpy(data->mac_addr, dev->net->dev_addr, ETH_ALEN); + ret = sr_write_cmd(dev, SR_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, + data->mac_addr); + if (ret < 0) + goto out; + + return 0; + +out: + return ret; +} + +static const struct net_device_ops sr9800_netdev_ops = { + .ndo_open = usbnet_open, + .ndo_stop = usbnet_stop, + .ndo_start_xmit = usbnet_start_xmit, + .ndo_tx_timeout = usbnet_tx_timeout, + .ndo_change_mtu = usbnet_change_mtu, + .ndo_set_mac_address = sr_set_mac_address, + .ndo_validate_addr = eth_validate_addr, + .ndo_do_ioctl = sr_ioctl, + .ndo_set_rx_mode = sr_set_multicast, +}; + +static int sr9800_phy_powerup(struct usbnet *dev) +{ + int ret; + + /* set the embedded Ethernet PHY in power-down state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPPD | SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to power down PHY : %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + msleep(600); + + /* set the embedded Ethernet PHY in reset state */ + ret = sr_sw_reset(dev, SR_SWRESET_CLEAR); + if (ret < 0) { + netdev_err(dev->net, "Failed to power up PHY: %d\n", ret); + return ret; + } + msleep(20); + + /* set the embedded Ethernet PHY in power-up state */ + ret = sr_sw_reset(dev, SR_SWRESET_IPRL); + if (ret < 0) { + netdev_err(dev->net, "Failed to reset PHY: %d\n", ret); + return ret; + } + + return 0; +} + +static int sr9800_bind(struct usbnet *dev, struct usb_interface *intf) +{ + struct sr_data *data = (struct sr_data *)&dev->data; + u16 led01_mux, led23_mux; + int ret, embd_phy; + u32 phyid; + u16 rx_ctl; + + data->eeprom_len = SR9800_EEPROM_LEN; + + usbnet_get_endpoints(dev, intf); + + /* LED Setting Rule : + * AABB:CCDD + * AA : MFA0(LED0) + * BB : MFA1(LED1) + * CC : MFA2(LED2), Reserved for SR9800 + * DD : MFA3(LED3), Reserved for SR9800 + */ + led01_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_LINK; + led23_mux = (SR_LED_MUX_LINK_ACTIVE << 8) | SR_LED_MUX_TX_ACTIVE; + ret = sr_write_cmd(dev, SR_CMD_LED_MUX, led01_mux, led23_mux, 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "set LINK LED failed : %d\n", ret); + goto out; + } + + /* Get the MAC address */ + ret = sr_read_cmd(dev, SR_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, + dev->net->dev_addr); + if (ret < 0) { + netdev_dbg(dev->net, "Failed to read MAC address: %d\n", ret); + return ret; + } + netdev_dbg(dev->net, "mac addr : %pM\n", dev->net->dev_addr); + + /* Initialize MII structure */ + dev->mii.dev = dev->net; + dev->mii.mdio_read = sr_mdio_read; + dev->mii.mdio_write = sr_mdio_write; + dev->mii.phy_id_mask = 0x1f; + dev->mii.reg_num_mask = 0x1f; + dev->mii.phy_id = sr_get_phy_addr(dev); + + dev->net->netdev_ops = &sr9800_netdev_ops; + dev->net->ethtool_ops = &sr9800_ethtool_ops; + + embd_phy = ((dev->mii.phy_id & 0x1f) == 0x10 ? 1 : 0); + /* Reset the PHY to normal operation mode */ + ret = sr_write_cmd(dev, SR_CMD_SW_PHY_SELECT, embd_phy, 0, 0, NULL); + if (ret < 0) { + netdev_dbg(dev->net, "Select PHY #1 failed: %d\n", ret); + return ret; + } + + /* Init PHY routine */ + ret = sr9800_phy_powerup(dev); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x after software reset\n", rx_ctl); + ret = sr_write_rx_ctl(dev, 0x0000); + if (ret < 0) + goto out; + + rx_ctl = sr_read_rx_ctl(dev); + netdev_dbg(dev->net, "RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); + + /* Read PHYID register *AFTER* the PHY was reset properly */ + phyid = sr_get_phyid(dev); + netdev_dbg(dev->net, "PHYID=0x%08x\n", phyid); + + /* medium mode setting */ + ret = sr9800_set_default_mode(dev); + if (ret < 0) + goto out; + + if (dev->udev->speed == USB_SPEED_HIGH) { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_4K].size; + } else { + ret = sr_write_cmd(dev, SR_CMD_BULKIN_SIZE, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].byte_cnt, + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].threshold, + 0, NULL); + if (ret < 0) { + netdev_err(dev->net, "Reset RX_CTL failed: %d\n", ret); + goto out; + } + dev->rx_urb_size = + SR9800_BULKIN_SIZE[SR9800_MAX_BULKIN_2K].size; + } + netdev_dbg(dev->net, "%s : setting rx_urb_size with : %ld\n", __func__, + dev->rx_urb_size); + return 0; + +out: + return ret; +} + +static const struct driver_info sr9800_driver_info = { + .description = "CoreChip SR9800 USB 2.0 Ethernet", + .bind = sr9800_bind, + .status = sr_status, + .link_reset = sr9800_link_reset, + .reset = sr9800_reset, + .flags = DRIVER_FLAG, + .rx_fixup = sr_rx_fixup, + .tx_fixup = sr_tx_fixup, +}; + +static const struct usb_device_id products[] = { + { + USB_DEVICE(0x0fe6, 0x9800), /* SR9800 Device */ + .driver_info = (unsigned long) &sr9800_driver_info, + }, + {}, /* END */ +}; + +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver sr_driver = { + .name = DRIVER_NAME, + .id_table = products, + .probe = usbnet_probe, + .suspend = usbnet_suspend, + .resume = usbnet_resume, + .disconnect = usbnet_disconnect, + .supports_autosuspend = 1, +}; + +module_usb_driver(sr_driver); + +MODULE_AUTHOR("Liu Junliang <liujunliang_ljl@163.com"); +MODULE_VERSION(DRIVER_VERSION); +MODULE_DESCRIPTION("SR9800 USB 2.0 USB2NET Dev : http://www.corechip-sz.com"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/sr9800.h b/drivers/net/usb/sr9800.h new file mode 100644 index 00000000000..18f67025127 --- /dev/null +++ b/drivers/net/usb/sr9800.h @@ -0,0 +1,202 @@ +/* CoreChip-sz SR9800 one chip USB 2.0 Ethernet Devices + * + * Author : Liu Junliang <liujunliang_ljl@163.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#ifndef _SR9800_H +#define _SR9800_H + +/* SR9800 spec. command table on Linux Platform */ + +/* command : Software Station Management Control Reg */ +#define SR_CMD_SET_SW_MII 0x06 +/* command : PHY Read Reg */ +#define SR_CMD_READ_MII_REG 0x07 +/* command : PHY Write Reg */ +#define SR_CMD_WRITE_MII_REG 0x08 +/* command : Hardware Station Management Control Reg */ +#define SR_CMD_SET_HW_MII 0x0a +/* command : SROM Read Reg */ +#define SR_CMD_READ_EEPROM 0x0b +/* command : SROM Write Reg */ +#define SR_CMD_WRITE_EEPROM 0x0c +/* command : SROM Write Enable Reg */ +#define SR_CMD_WRITE_ENABLE 0x0d +/* command : SROM Write Disable Reg */ +#define SR_CMD_WRITE_DISABLE 0x0e +/* command : RX Control Read Reg */ +#define SR_CMD_READ_RX_CTL 0x0f +#define SR_RX_CTL_PRO (1 << 0) +#define SR_RX_CTL_AMALL (1 << 1) +#define SR_RX_CTL_SEP (1 << 2) +#define SR_RX_CTL_AB (1 << 3) +#define SR_RX_CTL_AM (1 << 4) +#define SR_RX_CTL_AP (1 << 5) +#define SR_RX_CTL_ARP (1 << 6) +#define SR_RX_CTL_SO (1 << 7) +#define SR_RX_CTL_RH1M (1 << 8) +#define SR_RX_CTL_RH2M (1 << 9) +#define SR_RX_CTL_RH3M (1 << 10) +/* command : RX Control Write Reg */ +#define SR_CMD_WRITE_RX_CTL 0x10 +/* command : IPG0/IPG1/IPG2 Control Read Reg */ +#define SR_CMD_READ_IPG012 0x11 +/* command : IPG0/IPG1/IPG2 Control Write Reg */ +#define SR_CMD_WRITE_IPG012 0x12 +/* command : Node ID Read Reg */ +#define SR_CMD_READ_NODE_ID 0x13 +/* command : Node ID Write Reg */ +#define SR_CMD_WRITE_NODE_ID 0x14 +/* command : Multicast Filter Array Read Reg */ +#define SR_CMD_READ_MULTI_FILTER 0x15 +/* command : Multicast Filter Array Write Reg */ +#define SR_CMD_WRITE_MULTI_FILTER 0x16 +/* command : Eth/HomePNA PHY Address Reg */ +#define SR_CMD_READ_PHY_ID 0x19 +/* command : Medium Status Read Reg */ +#define SR_CMD_READ_MEDIUM_STATUS 0x1a +#define SR_MONITOR_LINK (1 << 1) +#define SR_MONITOR_MAGIC (1 << 2) +#define SR_MONITOR_HSFS (1 << 4) +/* command : Medium Status Write Reg */ +#define SR_CMD_WRITE_MEDIUM_MODE 0x1b +#define SR_MEDIUM_GM (1 << 0) +#define SR_MEDIUM_FD (1 << 1) +#define SR_MEDIUM_AC (1 << 2) +#define SR_MEDIUM_ENCK (1 << 3) +#define SR_MEDIUM_RFC (1 << 4) +#define SR_MEDIUM_TFC (1 << 5) +#define SR_MEDIUM_JFE (1 << 6) +#define SR_MEDIUM_PF (1 << 7) +#define SR_MEDIUM_RE (1 << 8) +#define SR_MEDIUM_PS (1 << 9) +#define SR_MEDIUM_RSV (1 << 10) +#define SR_MEDIUM_SBP (1 << 11) +#define SR_MEDIUM_SM (1 << 12) +/* command : Monitor Mode Status Read Reg */ +#define SR_CMD_READ_MONITOR_MODE 0x1c +/* command : Monitor Mode Status Write Reg */ +#define SR_CMD_WRITE_MONITOR_MODE 0x1d +/* command : GPIO Status Read Reg */ +#define SR_CMD_READ_GPIOS 0x1e +#define SR_GPIO_GPO0EN (1 << 0) /* GPIO0 Output enable */ +#define SR_GPIO_GPO_0 (1 << 1) /* GPIO0 Output value */ +#define SR_GPIO_GPO1EN (1 << 2) /* GPIO1 Output enable */ +#define SR_GPIO_GPO_1 (1 << 3) /* GPIO1 Output value */ +#define SR_GPIO_GPO2EN (1 << 4) /* GPIO2 Output enable */ +#define SR_GPIO_GPO_2 (1 << 5) /* GPIO2 Output value */ +#define SR_GPIO_RESERVED (1 << 6) /* Reserved */ +#define SR_GPIO_RSE (1 << 7) /* Reload serial EEPROM */ +/* command : GPIO Status Write Reg */ +#define SR_CMD_WRITE_GPIOS 0x1f +/* command : Eth PHY Power and Reset Control Reg */ +#define SR_CMD_SW_RESET 0x20 +#define SR_SWRESET_CLEAR 0x00 +#define SR_SWRESET_RR (1 << 0) +#define SR_SWRESET_RT (1 << 1) +#define SR_SWRESET_PRTE (1 << 2) +#define SR_SWRESET_PRL (1 << 3) +#define SR_SWRESET_BZ (1 << 4) +#define SR_SWRESET_IPRL (1 << 5) +#define SR_SWRESET_IPPD (1 << 6) +/* command : Software Interface Selection Status Read Reg */ +#define SR_CMD_SW_PHY_STATUS 0x21 +/* command : Software Interface Selection Status Write Reg */ +#define SR_CMD_SW_PHY_SELECT 0x22 +/* command : BULK in Buffer Size Reg */ +#define SR_CMD_BULKIN_SIZE 0x2A +/* command : LED_MUX Control Reg */ +#define SR_CMD_LED_MUX 0x70 +#define SR_LED_MUX_TX_ACTIVE (1 << 0) +#define SR_LED_MUX_RX_ACTIVE (1 << 1) +#define SR_LED_MUX_COLLISION (1 << 2) +#define SR_LED_MUX_DUP_COL (1 << 3) +#define SR_LED_MUX_DUP (1 << 4) +#define SR_LED_MUX_SPEED (1 << 5) +#define SR_LED_MUX_LINK_ACTIVE (1 << 6) +#define SR_LED_MUX_LINK (1 << 7) + +/* Register Access Flags */ +#define SR_REQ_RD_REG (USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE) +#define SR_REQ_WR_REG (USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE) + +/* Multicast Filter Array size & Max Number */ +#define SR_MCAST_FILTER_SIZE 8 +#define SR_MAX_MCAST 64 + +/* IPG0/1/2 Default Value */ +#define SR9800_IPG0_DEFAULT 0x15 +#define SR9800_IPG1_DEFAULT 0x0c +#define SR9800_IPG2_DEFAULT 0x12 + +/* Medium Status Default Mode */ +#define SR9800_MEDIUM_DEFAULT \ + (SR_MEDIUM_FD | SR_MEDIUM_RFC | \ + SR_MEDIUM_TFC | SR_MEDIUM_PS | \ + SR_MEDIUM_AC | SR_MEDIUM_RE) + +/* RX Control Default Setting */ +#define SR_DEFAULT_RX_CTL \ + (SR_RX_CTL_SO | SR_RX_CTL_AB | SR_RX_CTL_RH1M) + +/* EEPROM Magic Number & EEPROM Size */ +#define SR_EEPROM_MAGIC 0xdeadbeef +#define SR9800_EEPROM_LEN 0xff + +/* SR9800 Driver Version and Driver Name */ +#define DRIVER_VERSION "11-Nov-2013" +#define DRIVER_NAME "CoreChips" +#define DRIVER_FLAG \ + (FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR | FLAG_MULTI_PACKET) + +/* SR9800 BULKIN Buffer Size */ +#define SR9800_MAX_BULKIN_2K 0 +#define SR9800_MAX_BULKIN_4K 1 +#define SR9800_MAX_BULKIN_6K 2 +#define SR9800_MAX_BULKIN_8K 3 +#define SR9800_MAX_BULKIN_16K 4 +#define SR9800_MAX_BULKIN_20K 5 +#define SR9800_MAX_BULKIN_24K 6 +#define SR9800_MAX_BULKIN_32K 7 + +struct {unsigned short size, byte_cnt, threshold; } SR9800_BULKIN_SIZE[] = { + /* 2k */ + {2048, 0x8000, 0x8001}, + /* 4k */ + {4096, 0x8100, 0x8147}, + /* 6k */ + {6144, 0x8200, 0x81EB}, + /* 8k */ + {8192, 0x8300, 0x83D7}, + /* 16 */ + {16384, 0x8400, 0x851E}, + /* 20k */ + {20480, 0x8500, 0x8666}, + /* 24k */ + {24576, 0x8600, 0x87AE}, + /* 32k */ + {32768, 0x8700, 0x8A3D}, +}; + +/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */ +struct sr_data { + u8 multi_filter[SR_MCAST_FILTER_SIZE]; + u8 mac_addr[ETH_ALEN]; + u8 phymode; + u8 ledmode; + u8 eeprom_len; +}; + +struct sr9800_int_data { + __le16 res1; + u8 link; + __le16 res2; + u8 status; + __le16 res3; +} __packed; + +#endif /* _SR9800_H */ diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index 026a313c2d2..b0f705c2378 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -469,7 +469,6 @@ static inline struct hlist_head *vxlan_fdb_head(struct vxlan_dev *vxlan, /* Look up Ethernet address in forwarding table */ static struct vxlan_fdb *__vxlan_find_mac(struct vxlan_dev *vxlan, const u8 *mac) - { struct hlist_head *head = vxlan_fdb_head(vxlan, mac); struct vxlan_fdb *f; @@ -596,10 +595,8 @@ static struct sk_buff **vxlan_gro_receive(struct sk_buff **head, struct sk_buff NAPI_GRO_CB(p)->same_flow = 0; continue; } - goto found; } -found: type = eh->h_proto; rcu_read_lock(); diff --git a/drivers/net/wan/dlci.c b/drivers/net/wan/dlci.c index 0d1c7592efa..19f7cb2cdef 100644 --- a/drivers/net/wan/dlci.c +++ b/drivers/net/wan/dlci.c @@ -71,12 +71,9 @@ static int dlci_header(struct sk_buff *skb, struct net_device *dev, const void *saddr, unsigned len) { struct frhdr hdr; - struct dlci_local *dlp; unsigned int hlen; char *dest; - dlp = netdev_priv(dev); - hdr.control = FRAD_I_UI; switch (type) { @@ -107,11 +104,9 @@ static int dlci_header(struct sk_buff *skb, struct net_device *dev, static void dlci_receive(struct sk_buff *skb, struct net_device *dev) { - struct dlci_local *dlp; struct frhdr *hdr; int process, header; - dlp = netdev_priv(dev); if (!pskb_may_pull(skb, sizeof(*hdr))) { netdev_notice(dev, "invalid data no header\n"); dev->stats.rx_errors++; diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c index 8aa20df55e5..507d9a9ee69 100644 --- a/drivers/net/wireless/ath/ar5523/ar5523.c +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -1764,7 +1764,7 @@ static struct usb_device_id ar5523_id_table[] = { AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ - AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108 + AR5523_DEVICE_UG(0x129b, 0x160b), /* Gigaset / USB stick 108 (CyberTAN Technology) */ AR5523_DEVICE_UG(0x16ab, 0x7801), /* Globalsun / AR5523_1 */ AR5523_DEVICE_UX(0x16ab, 0x7811), /* Globalsun / AR5523_2 */ diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 25243cbc07f..b8daff78b9d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -5065,6 +5065,10 @@ static u16 ar9003_hw_get_max_edge_power(struct ar9300_eeprom *eep, break; } } + + if (is2GHz && !twiceMaxEdgePower) + twiceMaxEdgePower = 60; + return twiceMaxEdgePower; } diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 58da3468d1f..99a203174f4 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -262,6 +262,8 @@ enum tid_aggr_state { struct ath9k_htc_sta { u8 index; enum tid_aggr_state tid_state[ATH9K_HTC_MAX_TID]; + struct work_struct rc_update_work; + struct ath9k_htc_priv *htc_priv; }; #define ATH9K_HTC_RXBUF 256 diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_init.c b/drivers/net/wireless/ath/ath9k/htc_drv_init.c index f4e1de20d99..c57d6b859c0 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_init.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_init.c @@ -34,6 +34,10 @@ static int ath9k_htc_btcoex_enable; module_param_named(btcoex_enable, ath9k_htc_btcoex_enable, int, 0444); MODULE_PARM_DESC(btcoex_enable, "Enable wifi-BT coexistence"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + #define CHAN2G(_freq, _idx) { \ .center_freq = (_freq), \ .hw_value = (_idx), \ @@ -725,12 +729,14 @@ static void ath9k_set_hw_capab(struct ath9k_htc_priv *priv, IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_HAS_RATE_CONTROL | IEEE80211_HW_RX_INCLUDES_FCS | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC) | diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index 608d739d137..c9254a61ca5 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -1270,18 +1270,50 @@ static void ath9k_htc_configure_filter(struct ieee80211_hw *hw, mutex_unlock(&priv->mutex); } +static void ath9k_htc_sta_rc_update_work(struct work_struct *work) +{ + struct ath9k_htc_sta *ista = + container_of(work, struct ath9k_htc_sta, rc_update_work); + struct ieee80211_sta *sta = + container_of((void *)ista, struct ieee80211_sta, drv_priv); + struct ath9k_htc_priv *priv = ista->htc_priv; + struct ath_common *common = ath9k_hw_common(priv->ah); + struct ath9k_htc_target_rate trate; + + mutex_lock(&priv->mutex); + ath9k_htc_ps_wakeup(priv); + + memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); + ath9k_htc_setup_rate(priv, sta, &trate); + if (!ath9k_htc_send_rate_cmd(priv, &trate)) + ath_dbg(common, CONFIG, + "Supported rates for sta: %pM updated, rate caps: 0x%X\n", + sta->addr, be32_to_cpu(trate.capflags)); + else + ath_dbg(common, CONFIG, + "Unable to update supported rates for sta: %pM\n", + sta->addr); + + ath9k_htc_ps_restore(priv); + mutex_unlock(&priv->mutex); +} + static int ath9k_htc_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); ret = ath9k_htc_add_station(priv, vif, sta); - if (!ret) + if (!ret) { + INIT_WORK(&ista->rc_update_work, ath9k_htc_sta_rc_update_work); + ista->htc_priv = priv; ath9k_htc_init_rate(priv, sta); + } ath9k_htc_ps_restore(priv); mutex_unlock(&priv->mutex); @@ -1293,12 +1325,13 @@ static int ath9k_htc_sta_remove(struct ieee80211_hw *hw, struct ieee80211_sta *sta) { struct ath9k_htc_priv *priv = hw->priv; - struct ath9k_htc_sta *ista; + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; int ret; + cancel_work_sync(&ista->rc_update_work); + mutex_lock(&priv->mutex); ath9k_htc_ps_wakeup(priv); - ista = (struct ath9k_htc_sta *) sta->drv_priv; htc_sta_drain(priv->htc, ista->index); ret = ath9k_htc_remove_station(priv, vif, sta); ath9k_htc_ps_restore(priv); @@ -1311,28 +1344,12 @@ static void ath9k_htc_sta_rc_update(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u32 changed) { - struct ath9k_htc_priv *priv = hw->priv; - struct ath_common *common = ath9k_hw_common(priv->ah); - struct ath9k_htc_target_rate trate; - - mutex_lock(&priv->mutex); - ath9k_htc_ps_wakeup(priv); + struct ath9k_htc_sta *ista = (struct ath9k_htc_sta *) sta->drv_priv; - if (changed & IEEE80211_RC_SUPP_RATES_CHANGED) { - memset(&trate, 0, sizeof(struct ath9k_htc_target_rate)); - ath9k_htc_setup_rate(priv, sta, &trate); - if (!ath9k_htc_send_rate_cmd(priv, &trate)) - ath_dbg(common, CONFIG, - "Supported rates for sta: %pM updated, rate caps: 0x%X\n", - sta->addr, be32_to_cpu(trate.capflags)); - else - ath_dbg(common, CONFIG, - "Unable to update supported rates for sta: %pM\n", - sta->addr); - } + if (!(changed & IEEE80211_RC_SUPP_RATES_CHANGED)) + return; - ath9k_htc_ps_restore(priv); - mutex_unlock(&priv->mutex); + schedule_work(&ista->rc_update_work); } static int ath9k_htc_conf_tx(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index fbf43c05713..11eab9f01fd 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1316,7 +1316,7 @@ static bool ath9k_hw_set_reset(struct ath_hw *ah, int type) if (AR_SREV_9300_20_OR_LATER(ah)) udelay(50); else if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(100); @@ -2051,9 +2051,8 @@ static bool ath9k_hw_set_power_awake(struct ath_hw *ah) REG_SET_BIT(ah, AR_RTC_FORCE_WAKE, AR_RTC_FORCE_WAKE_EN); - if (AR_SREV_9100(ah)) - udelay(10000); + mdelay(10); else udelay(50); diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index c36de303c8f..1fc2e5a26b5 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -57,6 +57,10 @@ static int ath9k_bt_ant_diversity; module_param_named(bt_ant_diversity, ath9k_bt_ant_diversity, int, 0444); MODULE_PARM_DESC(bt_ant_diversity, "Enable WLAN/BT RX antenna diversity"); +static int ath9k_ps_enable; +module_param_named(ps_enable, ath9k_ps_enable, int, 0444); +MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); + bool is_ath9k_unloaded; /* We use the hw_value as an index into our private channel structure */ @@ -903,13 +907,15 @@ static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw) hw->flags = IEEE80211_HW_RX_INCLUDES_FCS | IEEE80211_HW_HOST_BROADCAST_PS_BUFFERING | IEEE80211_HW_SIGNAL_DBM | - IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK | IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_SUPPORTS_RC_TABLE | IEEE80211_HW_SUPPORTS_HT_CCK_RATES; + if (ath9k_ps_enable) + hw->flags |= IEEE80211_HW_SUPPORTS_PS; + if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_HT) { hw->flags |= IEEE80211_HW_AMPDU_AGGREGATION; diff --git a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c index f06f4cbe131..725e954d847 100644 --- a/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/iwlwifi/iwl-nvm-parse.c @@ -182,6 +182,11 @@ static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg, for (ch_idx = 0; ch_idx < IWL_NUM_CHANNELS; ch_idx++) { ch_flags = __le16_to_cpup(nvm_ch_flags + ch_idx); + + if (ch_idx >= NUM_2GHZ_CHANNELS && + !data->sku_cap_band_52GHz_enable) + ch_flags &= ~NVM_CHANNEL_VALID; + if (!(ch_flags & NVM_CHANNEL_VALID)) { IWL_DEBUG_EEPROM(dev, "Ch. %d Flags %x [%sGHz] - No traffic\n", diff --git a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h index 73cbba7424f..9426905de6b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h +++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h @@ -504,6 +504,7 @@ struct iwl_scan_offload_profile { * @match_notify: clients waiting for match found notification * @pass_match: clients waiting for the results * @active_clients: active clients bitmap - enum scan_framework_client + * @any_beacon_notify: clients waiting for match notification without match */ struct iwl_scan_offload_profile_cfg { struct iwl_scan_offload_profile profiles[IWL_SCAN_MAX_PROFILES]; @@ -512,7 +513,8 @@ struct iwl_scan_offload_profile_cfg { u8 match_notify; u8 pass_match; u8 active_clients; - u8 reserved[3]; + u8 any_beacon_notify; + u8 reserved[2]; } __packed; /** diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index c49b5073c25..6bf9766e598 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -246,7 +246,7 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) else hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; - if (mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { + if (0 && mvm->fw->ucode_capa.flags & IWL_UCODE_TLV_FLAGS_SCHED_SCAN) { hw->wiphy->flags |= WIPHY_FLAG_SUPPORTS_SCHED_SCAN; hw->wiphy->max_sched_scan_ssids = PROBE_OPTION_MAX; hw->wiphy->max_match_sets = IWL_SCAN_MAX_PROFILES; diff --git a/drivers/net/wireless/iwlwifi/mvm/scan.c b/drivers/net/wireless/iwlwifi/mvm/scan.c index 0e000796061..742afc429c9 100644 --- a/drivers/net/wireless/iwlwifi/mvm/scan.c +++ b/drivers/net/wireless/iwlwifi/mvm/scan.c @@ -344,7 +344,8 @@ int iwl_mvm_scan_request(struct iwl_mvm *mvm, iwl_mvm_scan_fill_ssids(cmd, req, basic_ssid ? 1 : 0); - cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL); + cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL | + TX_CMD_FLG_BT_DIS); cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id; cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE); cmd->tx_cmd.rate_n_flags = @@ -807,6 +808,8 @@ int iwl_mvm_config_sched_scan_profiles(struct iwl_mvm *mvm, profile_cfg->active_clients = SCAN_CLIENT_SCHED_SCAN; profile_cfg->pass_match = SCAN_CLIENT_SCHED_SCAN; profile_cfg->match_notify = SCAN_CLIENT_SCHED_SCAN; + if (!req->n_match_sets || !req->match_sets[0].ssid.ssid_len) + profile_cfg->any_beacon_notify = SCAN_CLIENT_SCHED_SCAN; for (i = 0; i < req->n_match_sets; i++) { profile = &profile_cfg->profiles[i]; diff --git a/drivers/net/wireless/iwlwifi/mvm/sta.c b/drivers/net/wireless/iwlwifi/mvm/sta.c index ec181213323..3397f59cd4e 100644 --- a/drivers/net/wireless/iwlwifi/mvm/sta.c +++ b/drivers/net/wireless/iwlwifi/mvm/sta.c @@ -652,7 +652,7 @@ int iwl_mvm_send_bcast_sta(struct iwl_mvm *mvm, struct ieee80211_vif *vif, { struct iwl_mvm_vif *mvmvif = iwl_mvm_vif_from_mac80211(vif); static const u8 _baddr[] = {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF}; - static const u8 *baddr = _baddr; + const u8 *baddr = _baddr; lockdep_assert_held(&mvm->mutex); diff --git a/drivers/net/wireless/iwlwifi/mvm/tx.c b/drivers/net/wireless/iwlwifi/mvm/tx.c index 90378c217bc..4df12fa9d33 100644 --- a/drivers/net/wireless/iwlwifi/mvm/tx.c +++ b/drivers/net/wireless/iwlwifi/mvm/tx.c @@ -659,8 +659,14 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, rcu_read_lock(); sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); + /* + * sta can't be NULL otherwise it'd mean that the sta has been freed in + * the firmware while we still have packets for it in the Tx queues. + */ + if (WARN_ON_ONCE(!sta)) + goto out; - if (!IS_ERR_OR_NULL(sta)) { + if (!IS_ERR(sta)) { mvmsta = iwl_mvm_sta_from_mac80211(sta); if (tid != IWL_TID_NON_QOS) { @@ -675,7 +681,6 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, spin_unlock_bh(&mvmsta->lock); } } else { - sta = NULL; mvmsta = NULL; } @@ -683,42 +688,38 @@ static void iwl_mvm_rx_tx_cmd_single(struct iwl_mvm *mvm, * If the txq is not an AMPDU queue, there is no chance we freed * several skbs. Check that out... */ - if (txq_id < mvm->first_agg_queue && !WARN_ON(skb_freed > 1) && - atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) { - if (mvmsta) { - /* - * If there are no pending frames for this STA, notify - * mac80211 that this station can go to sleep in its - * STA table. - */ - if (mvmsta->vif->type == NL80211_IFTYPE_AP) - ieee80211_sta_block_awake(mvm->hw, sta, false); - /* - * We might very well have taken mvmsta pointer while - * the station was being removed. The remove flow might - * have seen a pending_frame (because we didn't take - * the lock) even if now the queues are drained. So make - * really sure now that this the station is not being - * removed. If it is, run the drain worker to remove it. - */ - spin_lock_bh(&mvmsta->lock); - sta = rcu_dereference(mvm->fw_id_to_mac_id[sta_id]); - if (!sta || PTR_ERR(sta) == -EBUSY) { - /* - * Station disappeared in the meantime: - * so we are draining. - */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } - spin_unlock_bh(&mvmsta->lock); - } else if (!mvmsta && PTR_ERR(sta) == -EBUSY) { - /* Tx response without STA, so we are draining */ - set_bit(sta_id, mvm->sta_drained); - schedule_work(&mvm->sta_drained_wk); - } + if (txq_id >= mvm->first_agg_queue) + goto out; + + /* We can't free more than one frame at once on a shared queue */ + WARN_ON(skb_freed > 1); + + /* If we have still frames from this STA nothing to do here */ + if (!atomic_sub_and_test(skb_freed, &mvm->pending_frames[sta_id])) + goto out; + + if (mvmsta && mvmsta->vif->type == NL80211_IFTYPE_AP) { + /* + * If there are no pending frames for this STA, notify + * mac80211 that this station can go to sleep in its + * STA table. + * If mvmsta is not NULL, sta is valid. + */ + ieee80211_sta_block_awake(mvm->hw, sta, false); + } + + if (PTR_ERR(sta) == -EBUSY || PTR_ERR(sta) == -ENOENT) { + /* + * We are draining and this was the last packet - pre_rcu_remove + * has been called already. We might be after the + * synchronize_net already. + * Don't rely on iwl_mvm_rm_sta to see the empty Tx queues. + */ + set_bit(sta_id, mvm->sta_drained); + schedule_work(&mvm->sta_drained_wk); } +out: rcu_read_unlock(); } diff --git a/drivers/net/wireless/iwlwifi/mvm/utils.c b/drivers/net/wireless/iwlwifi/mvm/utils.c index a4a5e25623c..86989df6935 100644 --- a/drivers/net/wireless/iwlwifi/mvm/utils.c +++ b/drivers/net/wireless/iwlwifi/mvm/utils.c @@ -411,6 +411,8 @@ void iwl_mvm_dump_nic_error_log(struct iwl_mvm *mvm) mvm->status, table.valid); } + IWL_ERR(mvm, "Loaded firmware version: %s\n", mvm->fw->fw_version); + trace_iwlwifi_dev_ucode_error(trans->dev, table.error_id, table.tsf_low, table.data1, table.data2, table.data3, table.blink1, table.blink2, table.ilink1, diff --git a/drivers/net/wireless/iwlwifi/pcie/drv.c b/drivers/net/wireless/iwlwifi/pcie/drv.c index 3040924f5f3..f47bcbe2945 100644 --- a/drivers/net/wireless/iwlwifi/pcie/drv.c +++ b/drivers/net/wireless/iwlwifi/pcie/drv.c @@ -359,20 +359,25 @@ static DEFINE_PCI_DEVICE_TABLE(iwl_hw_card_ids) = { /* 7265 Series */ {IWL_PCI_DEVICE(0x095A, 0x5010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5112, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x5100, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x510A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5310, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5302, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5012, iwl7265_2ac_cfg)}, - {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5410, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5400, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x1010, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5000, iwl7265_2n_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x500A, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5200, iwl7265_2n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x5002, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095B, 0x5202, iwl7265_n_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9010, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9012, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9110, iwl7265_2ac_cfg)}, + {IWL_PCI_DEVICE(0x095A, 0x9112, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9210, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9510, iwl7265_2ac_cfg)}, {IWL_PCI_DEVICE(0x095A, 0x9310, iwl7265_2ac_cfg)}, diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index abc5f56f29f..2f1cd929c6f 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1877,6 +1877,11 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) EEPROM_MAC_ADDR_0)); /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + + /* * Initialize hw_mode information. */ spec->supported_bands = SUPPORT_BAND_2GHZ; diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 9f16824cd1b..d849d590de2 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1706,6 +1706,11 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_PS_NULLFUNC_STACK; + /* + * Disable powersaving as default. + */ + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + SET_IEEE80211_DEV(rt2x00dev->hw, rt2x00dev->dev); SET_IEEE80211_PERM_ADDR(rt2x00dev->hw, rt2x00_eeprom_addr(rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index b8f5b06006c..7f8b5d156c8 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -7458,10 +7458,9 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) u32 reg; /* - * Disable powersaving as default on PCI devices. + * Disable powersaving as default. */ - if (rt2x00_is_pci(rt2x00dev) || rt2x00_is_soc(rt2x00dev)) - rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; + rt2x00dev->hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT; /* * Initialize all hw fields. diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index 8ec17aad0e5..3867d1470b3 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -107,6 +107,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) struct rtl8180_priv *priv = dev->priv; unsigned int count = 32; u8 signal, agc, sq; + dma_addr_t mapping; while (count--) { struct rtl8180_rx_desc *entry = &priv->rx_ring[priv->rx_idx]; @@ -128,6 +129,17 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) if (unlikely(!new_skb)) goto done; + mapping = pci_map_single(priv->pdev, + skb_tail_pointer(new_skb), + MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(new_skb); + dev_err(&priv->pdev->dev, "RX DMA map error\n"); + + goto done; + } + pci_unmap_single(priv->pdev, *((dma_addr_t *)skb->cb), MAX_RX_SIZE, PCI_DMA_FROMDEVICE); @@ -158,9 +170,7 @@ static void rtl8180_handle_rx(struct ieee80211_hw *dev) skb = new_skb; priv->rx_buf[priv->rx_idx] = skb; - *((dma_addr_t *) skb->cb) = - pci_map_single(priv->pdev, skb_tail_pointer(skb), - MAX_RX_SIZE, PCI_DMA_FROMDEVICE); + *((dma_addr_t *) skb->cb) = mapping; } done: @@ -266,6 +276,13 @@ static void rtl8180_tx(struct ieee80211_hw *dev, mapping = pci_map_single(priv->pdev, skb->data, skb->len, PCI_DMA_TODEVICE); + if (pci_dma_mapping_error(priv->pdev, mapping)) { + kfree_skb(skb); + dev_err(&priv->pdev->dev, "TX DMA mapping error\n"); + return; + + } + tx_flags = RTL818X_TX_DESC_FLAG_OWN | RTL818X_TX_DESC_FLAG_FS | RTL818X_TX_DESC_FLAG_LS | (ieee80211_get_tx_rate(dev, info)->hw_value << 24) | diff --git a/drivers/net/xen-netback/common.h b/drivers/net/xen-netback/common.h index 4c76bcb9a87..ae413a2cbee 100644 --- a/drivers/net/xen-netback/common.h +++ b/drivers/net/xen-netback/common.h @@ -143,11 +143,7 @@ struct xenvif { char rx_irq_name[IFNAMSIZ+4]; /* DEVNAME-rx */ struct xen_netif_rx_back_ring rx; struct sk_buff_head rx_queue; - bool rx_queue_stopped; - /* Set when the RX interrupt is triggered by the frontend. - * The worker thread may need to wake the queue. - */ - bool rx_event; + RING_IDX rx_last_skb_slots; /* This array is allocated seperately as it is large */ struct gnttab_copy *grant_copy_op; diff --git a/drivers/net/xen-netback/interface.c b/drivers/net/xen-netback/interface.c index b9de31ea7fc..7669d49a67e 100644 --- a/drivers/net/xen-netback/interface.c +++ b/drivers/net/xen-netback/interface.c @@ -100,7 +100,6 @@ static irqreturn_t xenvif_rx_interrupt(int irq, void *dev_id) { struct xenvif *vif = dev_id; - vif->rx_event = true; xenvif_kick_thread(vif); return IRQ_HANDLED; diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 6b62c3eb8e1..e5284bca2d9 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -476,7 +476,6 @@ static void xenvif_rx_action(struct xenvif *vif) unsigned long offset; struct skb_cb_overlay *sco; bool need_to_notify = false; - bool ring_full = false; struct netrx_pending_operations npo = { .copy = vif->grant_copy_op, @@ -486,7 +485,7 @@ static void xenvif_rx_action(struct xenvif *vif) skb_queue_head_init(&rxq); while ((skb = skb_dequeue(&vif->rx_queue)) != NULL) { - int max_slots_needed; + RING_IDX max_slots_needed; int i; /* We need a cheap worse case estimate for the number of @@ -509,9 +508,10 @@ static void xenvif_rx_action(struct xenvif *vif) if (!xenvif_rx_ring_slots_available(vif, max_slots_needed)) { skb_queue_head(&vif->rx_queue, skb); need_to_notify = true; - ring_full = true; + vif->rx_last_skb_slots = max_slots_needed; break; - } + } else + vif->rx_last_skb_slots = 0; sco = (struct skb_cb_overlay *)skb->cb; sco->meta_slots_used = xenvif_gop_skb(skb, &npo); @@ -522,8 +522,6 @@ static void xenvif_rx_action(struct xenvif *vif) BUG_ON(npo.meta_prod > ARRAY_SIZE(vif->meta)); - vif->rx_queue_stopped = !npo.copy_prod && ring_full; - if (!npo.copy_prod) goto done; @@ -1473,8 +1471,8 @@ static struct xen_netif_rx_response *make_rx_response(struct xenvif *vif, static inline int rx_work_todo(struct xenvif *vif) { - return (!skb_queue_empty(&vif->rx_queue) && !vif->rx_queue_stopped) || - vif->rx_event; + return !skb_queue_empty(&vif->rx_queue) && + xenvif_rx_ring_slots_available(vif, vif->rx_last_skb_slots); } static inline int tx_work_todo(struct xenvif *vif) @@ -1560,8 +1558,6 @@ int xenvif_kthread(void *data) if (!skb_queue_empty(&vif->rx_queue)) xenvif_rx_action(vif); - vif->rx_event = false; - if (skb_queue_empty(&vif->rx_queue) && netif_queue_stopped(vif->dev)) xenvif_start_queue(vif); diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index ff04d4f95ba..f9daa9e183f 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -1832,7 +1832,6 @@ static void netback_changed(struct xenbus_device *dev, case XenbusStateReconfiguring: case XenbusStateReconfigured: case XenbusStateUnknown: - case XenbusStateClosed: break; case XenbusStateInitWait: @@ -1847,6 +1846,10 @@ static void netback_changed(struct xenbus_device *dev, netdev_notify_peers(netdev); break; + case XenbusStateClosed: + if (dev->state == XenbusStateClosed) + break; + /* Missed the backend's CLOSING state -- fallthrough */ case XenbusStateClosing: xenbus_frontend_closed(dev); break; |