[NET]: Kill skb->list

Remove the "list" member of struct sk_buff, as it is entirely
redundant.  All SKB list removal callers know which list the
SKB is on, so storing this in sk_buff does nothing other than
taking up some space.

Two tricky bits were SCTP, which I took care of, and two ATM
drivers which Francois Romieu <romieu@fr.zoreil.com> fixed
up.

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

2 files changed, 9 insertions, 63 deletions

diff --git a/drivers/net/shaper.c b/drivers/net/shaper.c
index 3ad0b6751f6..221354eea21 100644
--- a/drivers/net/shaper.c
+++ b/drivers/net/shaper.c
@@ -156,52 +156,6 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
  	 
  	SHAPERCB(skb)->shapelen= shaper_clocks(shaper,skb);
  	
-#ifdef SHAPER_COMPLEX /* and broken.. */
-
- 	while(ptr && ptr!=(struct sk_buff *)&shaper->sendq)
- 	{
- 		if(ptr->pri<skb->pri 
- 			&& jiffies - SHAPERCB(ptr)->shapeclock < SHAPER_MAXSLIP)
- 		{
- 			struct sk_buff *tmp=ptr->prev;
-
- 			/*
- 			 *	It goes before us therefore we slip the length
- 			 *	of the new frame.
- 			 */
-
- 			SHAPERCB(ptr)->shapeclock+=SHAPERCB(skb)->shapelen;
- 			SHAPERCB(ptr)->shapelatency+=SHAPERCB(skb)->shapelen;
-
- 			/*
- 			 *	The packet may have slipped so far back it
- 			 *	fell off.
- 			 */
- 			if(SHAPERCB(ptr)->shapelatency > SHAPER_LATENCY)
- 			{
- 				skb_unlink(ptr);
- 				dev_kfree_skb(ptr);
- 			}
- 			ptr=tmp;
- 		}
- 		else
- 			break;
- 	}
- 	if(ptr==NULL || ptr==(struct sk_buff *)&shaper->sendq)
- 		skb_queue_head(&shaper->sendq,skb);
- 	else
- 	{
- 		struct sk_buff *tmp;
- 		/*
- 		 *	Set the packet clock out time according to the
- 		 *	frames ahead. Im sure a bit of thought could drop
- 		 *	this loop.
- 		 */
- 		for(tmp=skb_peek(&shaper->sendq); tmp!=NULL && tmp!=ptr; tmp=tmp->next)
- 			SHAPERCB(skb)->shapeclock+=tmp->shapelen;
- 		skb_append(ptr,skb);
- 	}
-#else
 	{
 		struct sk_buff *tmp;
 		/*
@@ -220,7 +174,7 @@ static int shaper_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		} else
 			skb_queue_tail(&shaper->sendq, skb);
 	}
-#endif 	
+
 	if(sh_debug)
  		printk("Frame queued.\n");
  	if(skb_queue_len(&shaper->sendq)>SHAPER_QLEN)
@@ -302,7 +256,7 @@ static void shaper_kick(struct shaper *shaper)
 			 *	Pull the frame and get interrupts back on.
 			 */
 			 
-			skb_unlink(skb);
+			skb_unlink(skb, &shaper->sendq);
 			if (shaper->recovery < 
 			    SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen)
 				shaper->recovery = SHAPERCB(skb)->shapeclock + SHAPERCB(skb)->shapelen;
diff --git a/drivers/net/wan/sdla_fr.c b/drivers/net/wan/sdla_fr.c
index c5f5e62aab8..0497dbdb863 100644
--- a/drivers/net/wan/sdla_fr.c
+++ b/drivers/net/wan/sdla_fr.c
@@ -445,7 +445,7 @@ void 	s508_s514_unlock(sdla_t *card, unsigned long *smp_flags);
 void 	s508_s514_lock(sdla_t *card, unsigned long *smp_flags);
 
 unsigned short calc_checksum (char *, int);
-static int setup_fr_header(struct sk_buff** skb,
+static int setup_fr_header(struct sk_buff *skb,
 			   struct net_device* dev, char op_mode);
 
 
@@ -1372,7 +1372,7 @@ static int if_send(struct sk_buff* skb, struct net_device* dev)
 	/* Move the if_header() code to here. By inserting frame
 	 * relay header in if_header() we would break the
 	 * tcpdump and other packet sniffers */
-	chan->fr_header_len = setup_fr_header(&skb,dev,chan->common.usedby);
+	chan->fr_header_len = setup_fr_header(skb,dev,chan->common.usedby);
 	if (chan->fr_header_len < 0 ){
 		++chan->ifstats.tx_dropped;
 		++card->wandev.stats.tx_dropped;
@@ -1597,8 +1597,6 @@ static int setup_for_delayed_transmit(struct net_device* dev,
 		return 1;
 	}
 
-	skb_unlink(skb);
-	
         chan->transmit_length = len;
 	chan->delay_skb = skb;
         
@@ -4871,18 +4869,15 @@ static void unconfig_fr (sdla_t *card)
 	}
 }
 
-static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
+static int setup_fr_header(struct sk_buff *skb, struct net_device* dev,
 			   char op_mode)
 {
-	struct sk_buff *skb = *skb_orig;
 	fr_channel_t *chan=dev->priv;
 
-	if (op_mode == WANPIPE){
-
+	if (op_mode == WANPIPE) {
 		chan->fr_header[0]=Q922_UI;
 		
 		switch (htons(skb->protocol)){
-			
 		case ETH_P_IP:
 			chan->fr_header[1]=NLPID_IP;
 			break;
@@ -4894,16 +4889,14 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
 	}
 
 	/* If we are in bridging mode, we must apply
-	 * an Ethernet header */
-	if (op_mode == BRIDGE || op_mode == BRIDGE_NODE){
-
-
+	 * an Ethernet header
+	 */
+	if (op_mode == BRIDGE || op_mode == BRIDGE_NODE) {
 		/* Encapsulate the packet as a bridged Ethernet frame. */
 #ifdef DEBUG
 		printk(KERN_INFO "%s: encapsulating skb for frame relay\n", 
 			dev->name);
 #endif
-		
 		chan->fr_header[0] = 0x03;
 		chan->fr_header[1] = 0x00;
 		chan->fr_header[2] = 0x80;
@@ -4916,7 +4909,6 @@ static int setup_fr_header(struct sk_buff **skb_orig, struct net_device* dev,
 		/* Yuck. */
 		skb->protocol = ETH_P_802_3;
 		return 8;
-
 	}
 		
 	return 0;