Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  b43: fix comment typo reqest -> request
  Haavard Skinnemoen has left Atmel
  cris: typo in mach-fs Makefile
  Kconfig: fix copy/paste-ism for dell-wmi-aio driver
  doc: timers-howto: fix a typo ("unsgined")
  perf: Only include annotate.h once in tools/perf/util/ui/browsers/annotate.c
  md, raid5: Fix spelling error in comment ('Ofcourse' --> 'Of course').
  treewide: fix a few typos in comments
  regulator: change debug statement be consistent with the style of the rest
  Revert "arm: mach-u300/gpio: Fix mem_region resource size miscalculations"
  audit: acquire creds selectively to reduce atomic op overhead
  rtlwifi: don't touch with treewide double semicolon removal
  treewide: cleanup continuations and remove logging message whitespace
  ath9k_hw: don't touch with treewide double semicolon removal
  include/linux/leds-regulator.h: fix syntax in example code
  tty: fix typo in descripton of tty_termios_encode_baud_rate
  xtensa: remove obsolete BKL kernel option from defconfig
  m68k: fix comment typo 'occcured'
  arch:Kconfig.locks Remove unused config option.
  treewide: remove extra semicolons
  ...

20 files changed, 42 insertions, 40 deletions

diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c
index c5298d1ab74..cd5789ff372 100644
--- a/drivers/net/atlx/atl1.c
+++ b/drivers/net/atlx/atl1.c
@@ -83,8 +83,9 @@
 #include "atl1.h"
 
 #define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
-Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, "
+	      "Chris Snook <csnook@redhat.com>, "
+	      "Jay Cliburn <jcliburn@gmail.com>");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(ATLX_DRIVER_VERSION);
 
diff --git a/drivers/net/can/pch_can.c b/drivers/net/can/pch_can.c
index e54712b22c2..d11fbb2b95f 100644
--- a/drivers/net/can/pch_can.c
+++ b/drivers/net/can/pch_can.c
@@ -653,7 +653,7 @@ static int pch_can_rx_normal(struct net_device *ndev, u32 obj_num, int quota)
 	u16 data_reg;
 
 	do {
-		/* Reading the messsage object from the Message RAM */
+		/* Reading the message object from the Message RAM */
 		iowrite32(PCH_CMASK_RX_TX_GET, &priv->regs->ifregs[0].cmask);
 		pch_can_rw_msg_obj(&priv->regs->ifregs[0].creq, obj_num);
 
diff --git a/drivers/net/can/softing/softing_main.c b/drivers/net/can/softing/softing_main.c
index 7a70709d560..60a49e5a2a5 100644
--- a/drivers/net/can/softing/softing_main.c
+++ b/drivers/net/can/softing/softing_main.c
@@ -797,7 +797,7 @@ static __devinit int softing_pdev_probe(struct platform_device *pdev)
 	ret = -EINVAL;
 	pres = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!pres)
-		goto platform_resource_failed;;
+		goto platform_resource_failed;
 	card->dpram_phys = pres->start;
 	card->dpram_size = pres->end - pres->start + 1;
 	card->dpram = ioremap_nocache(card->dpram_phys, card->dpram_size);
diff --git a/drivers/net/irda/ali-ircc.c b/drivers/net/irda/ali-ircc.c
index 872183f29ec..d532dde5120 100644
--- a/drivers/net/irda/ali-ircc.c
+++ b/drivers/net/irda/ali-ircc.c
@@ -1800,7 +1800,7 @@ static int  ali_ircc_dma_receive_complete(struct ali_ircc_cb *self)
 	MessageCount = inb(iobase+ FIR_LSR)&0x07;
 	
 	if (MessageCount > 0)	
-		IRDA_DEBUG(0, "%s(), Messsage count = %d,\n", __func__ , MessageCount);
+		IRDA_DEBUG(0, "%s(), Message count = %d,\n", __func__ , MessageCount);
 		
 	for (i=0; i<=MessageCount; i++)
 	{
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 629bd2649c0..6c6a02869df 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -1356,5 +1356,5 @@ module_exit(macb_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
-MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
+MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
 MODULE_ALIAS("platform:macb");
diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c
index a9a5f5ed19c..df0d2c8ecc0 100644
--- a/drivers/net/s2io.c
+++ b/drivers/net/s2io.c
@@ -7163,7 +7163,7 @@ static void do_s2io_card_down(struct s2io_nic *sp, int do_io)
 		/* As per the HW requirement we need to replenish the
 		 * receive buffer to avoid the ring bump. Since there is
 		 * no intention of processing the Rx frame at this pointwe are
-		 * just settting the ownership bit of rxd in Each Rx
+		 * just setting the ownership bit of rxd in Each Rx
 		 * ring to HW and set the appropriate buffer size
 		 * based on the ring mode
 		 */
diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c
index dd03bf61998..54415c7b84a 100644
--- a/drivers/net/sgiseeq.c
+++ b/drivers/net/sgiseeq.c
@@ -1,7 +1,7 @@
 /*
  * sgiseeq.c: Seeq8003 ethernet driver for SGI machines.
  *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  */
 
 #undef DEBUG
diff --git a/drivers/net/sgiseeq.h b/drivers/net/sgiseeq.h
index 523104de683..2211e2987a8 100644
--- a/drivers/net/sgiseeq.h
+++ b/drivers/net/sgiseeq.h
@@ -1,7 +1,7 @@
 /*
  * sgiseeq.h: Defines for the Seeq8003 ethernet controller.
  *
- * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
+ * Copyright (C) 1996 David S. Miller (davem@davemloft.net)
  */
 #ifndef _SGISEEQ_H
 #define _SGISEEQ_H
diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c
index 537fbc0a440..a97257f91a3 100644
--- a/drivers/net/ucc_geth_ethtool.c
+++ b/drivers/net/ucc_geth_ethtool.c
@@ -6,7 +6,7 @@
  * Author: Li Yang <leoli@freescale.com>
  *
  * Limitation:
- * Can only get/set setttings of the first queue.
+ * Can only get/set settings of the first queue.
  * Need to re-open the interface manually after changing some parameters.
  *
  * This program is free software; you can redistribute  it and/or modify it
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index e6dd2446696..ce395fe5de2 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -109,7 +109,7 @@ int usbnet_get_endpoints(struct usbnet *dev, struct usb_interface *intf)
 
 		/* take the first altsetting with in-bulk + out-bulk;
 		 * remember any status endpoint, just in case;
-		 * ignore other endpoints and altsetttings.
+		 * ignore other endpoints and altsettings.
 		 */
 		for (ep = 0; ep < alt->desc.bNumEndpoints; ep++) {
 			struct usb_host_endpoint	*e;
diff --git a/drivers/net/wan/pc300_drv.c b/drivers/net/wan/pc300_drv.c
index f875cfae309..737b59f1a8d 100644
--- a/drivers/net/wan/pc300_drv.c
+++ b/drivers/net/wan/pc300_drv.c
@@ -1445,7 +1445,7 @@ static void falc_update_stats(pc300_t * card, int ch)
  * Description:	In the remote loopback mode the clock and data recovered
  *		from the line inputs RL1/2 or RDIP/RDIN are routed back
  *		to the line outputs XL1/2 or XDOP/XDON via the analog
- *		transmitter. As in normal mode they are processsed by
+ *		transmitter. As in normal mode they are processed by
  *		the synchronizer and then sent to the system interface.
  *----------------------------------------------------------------------------
  */
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 4e5c7a11f04..a70c512f05d 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -242,9 +242,8 @@ static int airo_perm = 0555;
 static int proc_perm = 0644;
 
 MODULE_AUTHOR("Benjamin Reed");
-MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
-cards.  Direct support for ISA/PCI/MPI cards and support \
-for PCMCIA when used with airo_cs.");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet cards.  "
+		   "Direct support for ISA/PCI/MPI cards and support for PCMCIA when used with airo_cs.");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
 module_param_array(io, int, NULL, 0);
@@ -252,18 +251,20 @@ module_param_array(irq, int, NULL, 0);
 module_param_array(rates, int, NULL, 0);
 module_param_array(ssids, charp, NULL, 0);
 module_param(auto_wep, int, 0);
-MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
-the authentication options until an association is made.  The value of \
-auto_wep is number of the wep keys to check.  A value of 2 will try using \
-the key at index 0 and index 1.");
+MODULE_PARM_DESC(auto_wep,
+		 "If non-zero, the driver will keep looping through the authentication options until an association is made.  "
+		 "The value of auto_wep is number of the wep keys to check.  "
+		 "A value of 2 will try using the key at index 0 and index 1.");
 module_param(aux_bap, int, 0);
-MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
-than seems to work better for older cards with some older buses.  Before \
-switching it checks that the switch is needed.");
+MODULE_PARM_DESC(aux_bap,
+		 "If non-zero, the driver will switch into a mode that seems to work better for older cards with some older buses.  "
+		 "Before switching it checks that the switch is needed.");
 module_param(maxencrypt, int, 0);
-MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
-encryption.  Units are in 512kbs.  Zero (default) means there is no limit. \
-Older cards used to be limited to 2mbs (4).");
+MODULE_PARM_DESC(maxencrypt,
+		 "The maximum speed that the card can do encryption.  "
+		 "Units are in 512kbs.  "
+		 "Zero (default) means there is no limit.  "
+		 "Older cards used to be limited to 2mbs (4).");
 module_param(adhoc, int, 0);
 MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
 module_param(probe, int, 0);
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
index 1e220354e4b..d985841ff40 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c
@@ -3327,26 +3327,26 @@ static int ar9300_eeprom_restore_internal(struct ath_hw *ah,
 	else
 		cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying EEPROM accesss at Address 0x%04x\n", cptr);
+		"Trying EEPROM access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	read = ar9300_read_otp;
 	cptr = AR9300_BASE_ADDR;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
 	cptr = AR9300_BASE_ADDR_512;
 	ath_dbg(common, ATH_DBG_EEPROM,
-		"Trying OTP accesss at Address 0x%04x\n", cptr);
+		"Trying OTP access at Address 0x%04x\n", cptr);
 	if (ar9300_check_eeprom_header(ah, read, cptr))
 		goto found;
 
diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index 229f4388f79..ebc93c1bb5e 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -648,8 +648,8 @@ struct b43_request_fw_context {
 	char errors[B43_NR_FWTYPES][128];
 	/* Temporary buffer for storing the firmware name. */
 	char fwname[64];
-	/* A fatal error occurred while requesting. Firmware reqest
-	 * can not continue, as any other reqest will also fail. */
+	/* A fatal error occurred while requesting. Firmware request
+	 * can not continue, as any other request will also fail. */
 	int fatal_failure;
 };
 
diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c
index 42c3fe37af6..87813c33bdc 100644
--- a/drivers/net/wireless/ipw2x00/ipw2200.c
+++ b/drivers/net/wireless/ipw2x00/ipw2200.c
@@ -7430,7 +7430,7 @@ static int ipw_associate_network(struct ipw_priv *priv,
 		priv->assoc_request.capability &=
 		    ~cpu_to_le16(WLAN_CAPABILITY_SHORT_SLOT_TIME);
 
-	IPW_DEBUG_ASSOC("%sssocation attempt: '%s', channel %d, "
+	IPW_DEBUG_ASSOC("%ssociation attempt: '%s', channel %d, "
 			"802.11%c [%d], %s[:%s], enc=%s%s%s%c%c\n",
 			roaming ? "Rea" : "A",
 			print_ssid(ssid, priv->essid, priv->essid_len),
diff --git a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
index 81d6a25eb04..162d877e686 100644
--- a/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
+++ b/drivers/net/wireless/iwlegacy/iwl-4965-calib.c
@@ -713,8 +713,8 @@ iwl4965_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
 			iwl4965_find_first_chain(priv->cfg->valid_tx_ant);
 			data->disconn_array[first_chain] = 0;
 			active_chains |= BIT(first_chain);
-			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
-					W/A - declare %d as connected\n",
+			IWL_DEBUG_CALIB(priv,
+					"All Tx chains are disconnected W/A - declare %d as connected\n",
 					first_chain);
 			break;
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
index 0f6bb9b2e64..39d1e47a097 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn-calib.c
@@ -817,8 +817,8 @@ static void iwl_find_disconn_antenna(struct iwl_priv *priv, u32* average_sig,
 				find_first_chain(priv->cfg->valid_tx_ant);
 			data->disconn_array[first_chain] = 0;
 			active_chains |= BIT(first_chain);
-			IWL_DEBUG_CALIB(priv, "All Tx chains are disconnected \
-					W/A - declare %d as connected\n",
+			IWL_DEBUG_CALIB(priv,
+					"All Tx chains are disconnected W/A - declare %d as connected\n",
 					first_chain);
 			break;
 		}
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 3ecc3198d9b..08e3cae4fa5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -1766,7 +1766,7 @@ static const char *desc_lookup(u32 num)
 	max = ARRAY_SIZE(advanced_lookup) - 1;
 	for (i = 0; i < max; i++) {
 		if (advanced_lookup[i].num == num)
-			break;;
+			break;
 	}
 	return advanced_lookup[i].name;
 }
diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c
index fc89cd8c832..d2ec2535aa3 100644
--- a/drivers/net/wireless/rtlwifi/core.c
+++ b/drivers/net/wireless/rtlwifi/core.c
@@ -783,7 +783,7 @@ static void rtl_op_set_tsf(struct ieee80211_hw *hw, u64 tsf)
 {
 	struct rtl_priv *rtlpriv = rtl_priv(hw);
 	struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
-	u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;;
+	u8 bibss = (mac->opmode == NL80211_IFTYPE_ADHOC) ? 1 : 0;
 
 	mac->tsf = tsf;
 	rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_CORRECT_TSF, (u8 *) (&bibss));
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
index 4a56138eb33..defb4370cf7 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c
@@ -697,7 +697,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
 	rtl_write_word(rtlpriv, REG_CR, 0x2ff);
 
 	if (_rtl92ce_llt_table_init(hw) == false)
-		return false;;
+		return false;
 
 	rtl_write_dword(rtlpriv, REG_HISR, 0xffffffff);
 	rtl_write_byte(rtlpriv, REG_HISRE, 0xff);
@@ -754,7 +754,7 @@ static bool _rtl92ce_init_mac(struct ieee80211_hw *hw)
 
 	rtl_write_dword(rtlpriv, REG_MCUTST_1, 0x0);
 
-	return true;;
+	return true;
 }
 
 static void _rtl92ce_hw_configure(struct ieee80211_hw *hw)