wavelan: move driver to staging

Move the wavelan driver to drivers/staging.  This is another pre-802.11
driver that has seen virtually no non-API-fixup activity in years, and
for which no active hardware is likely to still exist.  This driver
represents unnecessary ongoing maintenance for no clear benefit.

This patch brought to you by the "hacking" session at the 2009 Kernel
Summit in Tokyo, Japan...

Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

10 files changed, 0 insertions, 11919 deletions

diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
index d50b3bee9a9..f94188f05a0 100644
--- a/drivers/net/wireless/Kconfig
+++ b/drivers/net/wireless/Kconfig
@@ -25,45 +25,6 @@ menuconfig WLAN_PRE80211
 	  This option does not affect the kernel build, it only
 	  lets you choose drivers.
 
-config WAVELAN
-	tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
-	depends on ISA && WLAN_PRE80211
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	---help---
-	  The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
-	  a Radio LAN (wireless Ethernet-like Local Area Network) using the
-	  radio frequencies 900 MHz and 2.4 GHz.
-
-	  If you want to use an ISA WaveLAN card under Linux, say Y and read
-	  the Ethernet-HOWTO, available from
-	  <http://www.tldp.org/docs.html#howto>. Some more specific
-	  information is contained in
-	  <file:Documentation/networking/wavelan.txt> and in the source code
-	  <file:drivers/net/wireless/wavelan.p.h>.
-
-	  You will also need the wireless tools package available from
-	  <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
-	  Please read the man pages contained therein.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan.
-
-config PCMCIA_WAVELAN
-	tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
-	depends on PCMCIA && WLAN_PRE80211
-	select WIRELESS_EXT
-	select WEXT_SPY
-	select WEXT_PRIV
-	help
-	  Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
-	  (PC-card) wireless Ethernet networking card to your computer.  This
-	  driver is for the non-IEEE-802.11 Wavelan cards.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called wavelan_cs.  If unsure, say N.
-
 config PCMCIA_NETWAVE
 	tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
 	depends on PCMCIA && WLAN_PRE80211
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
index b56c70f4ca7..f4a7c8ae27e 100644
--- a/drivers/net/wireless/Makefile
+++ b/drivers/net/wireless/Makefile
@@ -6,9 +6,7 @@ obj-$(CONFIG_IPW2100) += ipw2x00/
 obj-$(CONFIG_IPW2200) += ipw2x00/
 
 # Obsolete cards
-obj-$(CONFIG_WAVELAN)		+= wavelan.o
 obj-$(CONFIG_PCMCIA_NETWAVE)	+= netwave_cs.o
-obj-$(CONFIG_PCMCIA_WAVELAN)	+= wavelan_cs.o
 
 obj-$(CONFIG_HERMES)		+= orinoco/
 
diff --git a/drivers/net/wireless/i82586.h b/drivers/net/wireless/i82586.h
deleted file mode 100644
index 5f65b250646..00000000000
--- a/drivers/net/wireless/i82586.h
+++ /dev/null
@@ -1,413 +0,0 @@
-/*
- * Intel 82586 IEEE 802.3 Ethernet LAN Coprocessor.
- *
- * See:
- *	Intel Microcommunications 1991
- *	p1-1 to p1-37
- *	Intel order No. 231658
- *	ISBN 1-55512-119-5
- *
- *     Unfortunately, the above chapter mentions neither
- * the System Configuration Pointer (SCP) nor the
- * Intermediate System Configuration Pointer (ISCP),
- * so we probably need to look elsewhere for the
- * whole story -- some recommend the "Intel LAN
- * Components manual" but I have neither a copy
- * nor a full reference.  But "elsewhere" may be
- * in the same publication...
- *     The description of a later device, the
- * "82596CA High-Performance 32-Bit Local Area Network
- * Coprocessor", (ibid. p1-38 to p1-109) does mention
- * the SCP and ISCP and also has an i82586 compatibility
- * mode.  Even more useful is "AP-235 An 82586 Data Link
- * Driver" (ibid. p1-337 to p1-417).
- */
-
-#define	I82586_MEMZ	(64 * 1024)
-
-#define	I82586_SCP_ADDR	(I82586_MEMZ - sizeof(scp_t))
-
-#define	ADDR_LEN	6
-#define	I82586NULL	0xFFFF
-
-#define	toff(t,p,f) 	(unsigned short)((void *)(&((t *)((void *)0 + (p)))->f) - (void *)0)
-
-/*
- * System Configuration Pointer (SCP).
- */
-typedef struct scp_t	scp_t;
-struct scp_t
-{
-	unsigned short	scp_sysbus;	/* 82586 bus width:	*/
-#define		SCP_SY_16BBUS	(0x0 << 0)	/* 16 bits */
-#define		SCP_SY_8BBUS	(0x1 << 0)	/*  8 bits. */
-	unsigned short	scp_junk[2];	/* Unused */
-	unsigned short	scp_iscpl;	/* lower 16 bits of ISCP_ADDR */
-	unsigned short	scp_iscph;	/* upper 16 bits of ISCP_ADDR */
-};
-
-/*
- * Intermediate System Configuration Pointer (ISCP).
- */
-typedef struct iscp_t	iscp_t;
-struct iscp_t
-{
-	unsigned short	iscp_busy;	/* set by CPU before first CA,	*/
-					/* cleared by 82586 after read.	*/
-	unsigned short	iscp_offset;	/* offset of SCB		*/
-	unsigned short	iscp_basel;	/* base of SCB			*/
-	unsigned short	iscp_baseh;	/*  "				*/
-};
-
-/*
- * System Control Block (SCB).
- *	The 82586 writes its status to scb_status and then
- *	raises an interrupt to alert the CPU.
- *	The CPU writes a command to scb_command and
- *	then issues a Channel Attention (CA) to alert the 82586.
- */
-typedef struct scb_t	scb_t;
-struct scb_t
-{
-	unsigned short	scb_status;	/* Status of 82586		*/
-#define		SCB_ST_INT	(0xF << 12)	/* Some of:		*/
-#define		SCB_ST_CX	(0x1 << 15)	/* Cmd completed	*/
-#define		SCB_ST_FR	(0x1 << 14)	/* Frame received	*/
-#define		SCB_ST_CNA	(0x1 << 13)	/* Cmd unit not active	*/
-#define		SCB_ST_RNR	(0x1 << 12)	/* Rcv unit not ready	*/
-#define		SCB_ST_JUNK0	(0x1 << 11)	/* 0			*/
-#define		SCB_ST_CUS	(0x7 <<  8)	/* Cmd unit status	*/
-#define			SCB_ST_CUS_IDLE	(0 << 8)	/* Idle		*/
-#define			SCB_ST_CUS_SUSP	(1 << 8)	/* Suspended	*/
-#define			SCB_ST_CUS_ACTV	(2 << 8)	/* Active	*/
-#define		SCB_ST_JUNK1	(0x1 <<  7)	/* 0			*/
-#define		SCB_ST_RUS	(0x7 <<  4)	/* Rcv unit status	*/
-#define			SCB_ST_RUS_IDLE	(0 << 4)	/* Idle		*/
-#define			SCB_ST_RUS_SUSP	(1 << 4)	/* Suspended	*/
-#define			SCB_ST_RUS_NRES	(2 << 4)	/* No resources	*/
-#define			SCB_ST_RUS_RDY	(4 << 4)	/* Ready	*/
-	unsigned short	scb_command;	/* Next command			*/
-#define		SCB_CMD_ACK_CX	(0x1 << 15)	/* Ack cmd completion	*/
-#define		SCB_CMD_ACK_FR	(0x1 << 14)	/* Ack frame received	*/
-#define		SCB_CMD_ACK_CNA	(0x1 << 13)	/* Ack CU not active	*/
-#define		SCB_CMD_ACK_RNR	(0x1 << 12)	/* Ack RU not ready	*/
-#define		SCB_CMD_JUNKX	(0x1 << 11)	/* Unused		*/
-#define		SCB_CMD_CUC	(0x7 <<  8)	/* Command Unit command	*/
-#define			SCB_CMD_CUC_NOP	(0 << 8)	/* Nop		*/
-#define			SCB_CMD_CUC_GO	(1 << 8)	/* Start cbl_offset */
-#define			SCB_CMD_CUC_RES	(2 << 8)	/* Resume execution */
-#define			SCB_CMD_CUC_SUS	(3 << 8)	/* Suspend   "	*/
-#define			SCB_CMD_CUC_ABT	(4 << 8)	/* Abort     "	*/
-#define		SCB_CMD_RESET	(0x1 <<  7)	/* Reset chip (hardware) */
-#define		SCB_CMD_RUC	(0x7 <<  4)	/* Receive Unit command	*/
-#define			SCB_CMD_RUC_NOP	(0 << 4)	/* Nop		*/
-#define			SCB_CMD_RUC_GO	(1 << 4)	/* Start rfa_offset */
-#define			SCB_CMD_RUC_RES	(2 << 4)	/* Resume reception */
-#define			SCB_CMD_RUC_SUS	(3 << 4)	/* Suspend   "	*/
-#define			SCB_CMD_RUC_ABT	(4 << 4)	/* Abort     "	*/
-	unsigned short	scb_cbl_offset;	/* Offset of first command unit	*/
-					/* Action Command		*/
-	unsigned short	scb_rfa_offset;	/* Offset of first Receive	*/
-					/* Frame Descriptor in the	*/
-					/* Receive Frame Area		*/
-	unsigned short	scb_crcerrs;	/* Properly aligned frames	*/
-					/* received with a CRC error	*/
-	unsigned short	scb_alnerrs;	/* Misaligned frames received	*/
-					/* with a CRC error		*/
-	unsigned short	scb_rscerrs;	/* Frames lost due to no space	*/
-	unsigned short	scb_ovrnerrs;	/* Frames lost due to slow bus	*/
-};
-
-#define	scboff(p,f) 	toff(scb_t, p, f)
-
-/*
- * The eight Action Commands.
- */
-typedef enum acmd_e	acmd_e;
-enum acmd_e
-{
-	acmd_nop	= 0,	/* Do nothing				*/
-	acmd_ia_setup	= 1,	/* Load an (ethernet) address into the	*/
-				/* 82586				*/
-	acmd_configure	= 2,	/* Update the 82586 operating parameters */
-	acmd_mc_setup	= 3,	/* Load a list of (ethernet) multicast	*/
-				/* addresses into the 82586		*/
-	acmd_transmit	= 4,	/* Transmit a frame			*/
-	acmd_tdr	= 5,	/* Perform a Time Domain Reflectometer	*/
-				/* test on the serial link		*/
-	acmd_dump	= 6,	/* Copy 82586 registers to memory	*/
-	acmd_diagnose	= 7,	/* Run an internal self test		*/
-};
-
-/*
- * Generic Action Command header.
- */
-typedef struct ach_t	ach_t;
-struct ach_t
-{
-	unsigned short	ac_status;		/* Command status:	*/
-#define		AC_SFLD_C	(0x1 << 15)	/* Command completed	*/
-#define		AC_SFLD_B	(0x1 << 14)	/* Busy executing	*/
-#define		AC_SFLD_OK	(0x1 << 13)	/* Completed error free	*/
-#define		AC_SFLD_A	(0x1 << 12)	/* Command aborted	*/
-#define		AC_SFLD_FAIL	(0x1 << 11)	/* Selftest failed	*/
-#define		AC_SFLD_S10	(0x1 << 10)	/* No carrier sense	*/
-						/* during transmission	*/
-#define		AC_SFLD_S9	(0x1 <<  9)	/* Tx unsuccessful:	*/
-						/* (stopped) lost CTS	*/
-#define		AC_SFLD_S8	(0x1 <<  8)	/* Tx unsuccessful:	*/
-						/* (stopped) slow DMA	*/
-#define		AC_SFLD_S7	(0x1 <<  7)	/* Tx deferred:		*/
-						/* other link traffic	*/
-#define		AC_SFLD_S6	(0x1 <<  6)	/* Heart Beat: collision */
-						/* detect after last tx	*/
-#define		AC_SFLD_S5	(0x1 <<  5)	/* Tx stopped:		*/
-						/* excessive collisions	*/
-#define		AC_SFLD_MAXCOL	(0xF <<  0)	/* Collision count  	*/
-	unsigned short	ac_command;		/* Command specifier:	*/
-#define		AC_CFLD_EL	(0x1 << 15)	/* End of command list	*/
-#define		AC_CFLD_S	(0x1 << 14)	/* Suspend on completion */
-#define		AC_CFLD_I	(0x1 << 13)	/* Interrupt on completion */
-#define		AC_CFLD_CMD	(0x7 <<  0)	/* acmd_e		*/
-	unsigned short	ac_link;		/* Next Action Command	*/
-};
-
-#define	acoff(p,f) 	toff(ach_t, p, f)
-
-/*
- * The Nop Action Command.
- */
-typedef struct ac_nop_t	ac_nop_t;
-struct ac_nop_t
-{
-	ach_t	nop_h;
-};
-
-/*
- * The IA-Setup Action Command.
- */
-typedef struct ac_ias_t	ac_ias_t;
-struct ac_ias_t
-{
-	ach_t		ias_h;
-	unsigned char	ias_addr[ADDR_LEN]; /* The (ethernet) address	*/
-};
-
-/*
- * The Configure Action Command.
- */
-typedef struct ac_cfg_t	ac_cfg_t;
-struct ac_cfg_t
-{
-	ach_t		cfg_h;
-	unsigned char	cfg_byte_cnt;	/* Size foll data: 4-12	*/
-#define	AC_CFG_BYTE_CNT(v)	(((v) & 0xF) << 0)
-	unsigned char	cfg_fifolim;	/* FIFO threshold	*/
-#define	AC_CFG_FIFOLIM(v)	(((v) & 0xF) << 0)
-	unsigned char	cfg_byte8;
-#define	AC_CFG_SAV_BF(v) 	(((v) & 0x1) << 7)	/* Save rxd bad frames	*/
-#define	AC_CFG_SRDY(v) 		(((v) & 0x1) << 6)	/* SRDY/ARDY pin means	*/
-							/* external sync.	*/
-	unsigned char	cfg_byte9;
-#define	AC_CFG_ELPBCK(v)	(((v) & 0x1) << 7)	/* External loopback	*/
-#define	AC_CFG_ILPBCK(v)	(((v) & 0x1) << 6)	/* Internal loopback	*/
-#define	AC_CFG_PRELEN(v)	(((v) & 0x3) << 4)	/* Preamble length	*/
-#define		AC_CFG_PLEN_2		0		/*  2 bytes	*/
-#define		AC_CFG_PLEN_4		1		/*  4 bytes	*/
-#define		AC_CFG_PLEN_8		2		/*  8 bytes	*/
-#define		AC_CFG_PLEN_16		3		/* 16 bytes	*/
-#define	AC_CFG_ALOC(v)		(((v) & 0x1) << 3)	/* Addr/len data is	*/
-							/* explicit in buffers	*/
-#define	AC_CFG_ADDRLEN(v)	(((v) & 0x7) << 0)	/* Bytes per address	*/
-	unsigned char	cfg_byte10;
-#define	AC_CFG_BOFMET(v)	(((v) & 0x1) << 7)	/* Use alternate expo.	*/
-							/* backoff method	*/
-#define	AC_CFG_ACR(v)		(((v) & 0x7) << 4)	/* Accelerated cont. res. */
-#define	AC_CFG_LINPRIO(v)	(((v) & 0x7) << 0)	/* Linear priority	*/
-	unsigned char	cfg_ifs;	/* Interframe spacing		*/
-	unsigned char	cfg_slotl;	/* Slot time (low byte)		*/
-	unsigned char	cfg_byte13;
-#define	AC_CFG_RETRYNUM(v)	(((v) & 0xF) << 4)	/* Max. collision retry	*/
-#define	AC_CFG_SLTTMHI(v)	(((v) & 0x7) << 0)	/* Slot time (high bits) */
-	unsigned char	cfg_byte14;
-#define	AC_CFG_FLGPAD(v)	(((v) & 0x1) << 7)	/* Pad with HDLC flags	*/
-#define	AC_CFG_BTSTF(v)		(((v) & 0x1) << 6)	/* Do HDLC bitstuffing	*/
-#define	AC_CFG_CRC16(v)		(((v) & 0x1) << 5)	/* 16 bit CCITT CRC	*/
-#define	AC_CFG_NCRC(v)		(((v) & 0x1) << 4)	/* Insert no CRC	*/
-#define	AC_CFG_TNCRS(v)		(((v) & 0x1) << 3)	/* Tx even if no carrier */
-#define	AC_CFG_MANCH(v)		(((v) & 0x1) << 2)	/* Manchester coding	*/
-#define	AC_CFG_BCDIS(v)		(((v) & 0x1) << 1)	/* Disable broadcast	*/
-#define	AC_CFG_PRM(v)		(((v) & 0x1) << 0)	/* Promiscuous mode	*/
-	unsigned char	cfg_byte15;
-#define	AC_CFG_ICDS(v)		(((v) & 0x1) << 7)	/* Internal collision	*/
-							/* detect source	*/
-#define	AC_CFG_CDTF(v)		(((v) & 0x7) << 4)	/* Collision detect	*/
-							/* filter in bit times	*/
-#define	AC_CFG_ICSS(v)		(((v) & 0x1) << 3)	/* Internal carrier	*/
-							/* sense source		*/
-#define	AC_CFG_CSTF(v)		(((v) & 0x7) << 0)	/* Carrier sense	*/
-							/* filter in bit times	*/
-	unsigned short	cfg_min_frm_len;
-#define	AC_CFG_MNFRM(v)		(((v) & 0xFF) << 0)	/* Min. bytes/frame (<= 255) */
-};
-
-/*
- * The MC-Setup Action Command.
- */
-typedef struct ac_mcs_t	ac_mcs_t;
-struct ac_mcs_t
-{
-	ach_t		mcs_h;
-	unsigned short	mcs_cnt;	/* No. of bytes of MC addresses	*/
-#if 0
-	unsigned char	mcs_data[ADDR_LEN]; /* The first MC address ..	*/
-	...
-#endif
-};
-
-#define I82586_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
-
-/*
- * The Transmit Action Command.
- */
-typedef struct ac_tx_t	ac_tx_t;
-struct ac_tx_t
-{
-	ach_t		tx_h;
-	unsigned short	tx_tbd_offset;	/* Address of list of buffers.	*/
-#if	0
-Linux packets are passed down with the destination MAC address
-and length/type field already prepended to the data,
-so we do not need to insert it.  Consistent with this
-we must also set the AC_CFG_ALOC(..) flag during the
-ac_cfg_t action command.
-	unsigned char	tx_addr[ADDR_LEN]; /* The frame dest. address	*/
-	unsigned short	tx_length;	/* The frame length		*/
-#endif	/* 0 */
-};
-
-/*
- * The Time Domain Reflectometer Action Command.
- */
-typedef struct ac_tdr_t	ac_tdr_t;
-struct ac_tdr_t
-{
-	ach_t		tdr_h;
-	unsigned short	tdr_result;	/* Result.	*/
-#define		AC_TDR_LNK_OK	(0x1 << 15)	/* No link problem	*/
-#define		AC_TDR_XCVR_PRB	(0x1 << 14)	/* Txcvr cable problem	*/
-#define		AC_TDR_ET_OPN	(0x1 << 13)	/* Open on the link	*/
-#define		AC_TDR_ET_SRT	(0x1 << 12)	/* Short on the link	*/
-#define		AC_TDR_TIME	(0x7FF << 0)	/* Distance to problem	*/
-						/* site	in transmit	*/
-						/* clock cycles		*/
-};
-
-/*
- * The Dump Action Command.
- */
-typedef struct ac_dmp_t	ac_dmp_t;
-struct ac_dmp_t
-{
-	ach_t		dmp_h;
-	unsigned short	dmp_offset;	/* Result.	*/
-};
-
-/*
- * Size of the result of the dump command.
- */
-#define	DUMPBYTES	170
-
-/*
- * The Diagnose Action Command.
- */
-typedef struct ac_dgn_t	ac_dgn_t;
-struct ac_dgn_t
-{
-	ach_t		dgn_h;
-};
-
-/*
- * Transmit Buffer Descriptor (TBD).
- */
-typedef struct tbd_t	tbd_t;
-struct tbd_t
-{
-	unsigned short	tbd_status;		/* Written by the CPU	*/
-#define		TBD_STATUS_EOF	(0x1 << 15)	/* This TBD is the	*/
-						/* last for this frame	*/
-#define		TBD_STATUS_ACNT	(0x3FFF << 0)	/* Actual count of data	*/
-						/* bytes in this buffer	*/
-	unsigned short	tbd_next_bd_offset;	/* Next in list		*/
-	unsigned short	tbd_bufl;		/* Buffer address (low)	*/
-	unsigned short	tbd_bufh;		/*    "	     "	(high)	*/
-};
-
-/*
- * Receive Buffer Descriptor (RBD).
- */
-typedef struct rbd_t	rbd_t;
-struct rbd_t
-{
-	unsigned short	rbd_status;		/* Written by the 82586	*/
-#define		RBD_STATUS_EOF	(0x1 << 15)	/* This RBD is the	*/
-						/* last for this frame	*/
-#define		RBD_STATUS_F	(0x1 << 14)	/* ACNT field is valid	*/
-#define		RBD_STATUS_ACNT	(0x3FFF << 0)	/* Actual no. of data	*/
-						/* bytes in this buffer	*/
-	unsigned short	rbd_next_rbd_offset;	/* Next rbd in list	*/
-	unsigned short	rbd_bufl;		/* Data pointer (low)	*/
-	unsigned short	rbd_bufh;		/*  "	   "    (high)	*/
-	unsigned short	rbd_el_size;		/* EL+Data buf. size	*/
-#define		RBD_EL	(0x1 << 15)		/* This BD is the	*/
-						/* last in the list	*/
-#define		RBD_SIZE (0x3FFF << 0)		/* No. of bytes the	*/
-						/* buffer can hold	*/
-};
-
-#define	rbdoff(p,f) 	toff(rbd_t, p, f)
-
-/*
- * Frame Descriptor (FD).
- */
-typedef struct fd_t	fd_t;
-struct fd_t
-{
-	unsigned short	fd_status;		/* Written by the 82586	*/
-#define		FD_STATUS_C	(0x1 << 15)	/* Completed storing frame */
-#define		FD_STATUS_B	(0x1 << 14)	/* FD was consumed by RU */
-#define		FD_STATUS_OK	(0x1 << 13)	/* Frame rxd successfully */
-#define		FD_STATUS_S11	(0x1 << 11)	/* CRC error		*/
-#define		FD_STATUS_S10	(0x1 << 10)	/* Alignment error	*/
-#define		FD_STATUS_S9	(0x1 <<  9)	/* Ran out of resources	*/
-#define		FD_STATUS_S8	(0x1 <<  8)	/* Rx DMA overrun	*/
-#define		FD_STATUS_S7	(0x1 <<  7)	/* Frame too short	*/
-#define		FD_STATUS_S6	(0x1 <<  6)	/* No EOF flag		*/
-	unsigned short	fd_command;		/* Command		*/
-#define		FD_COMMAND_EL	(0x1 << 15)	/* Last FD in list	*/
-#define		FD_COMMAND_S	(0x1 << 14)	/* Suspend RU after rx	*/
-	unsigned short	fd_link_offset;		/* Next FD		*/
-	unsigned short	fd_rbd_offset;		/* First RBD (data)	*/
-						/* Prepared by CPU,	*/
-						/* updated by 82586	*/
-#if	0
-I think the rest is unused since we
-have set AC_CFG_ALOC(..).  However, just
-in case, we leave the space.
-#endif	/* 0 */
-	unsigned char	fd_dest[ADDR_LEN];	/* Destination address	*/
-						/* Written by 82586	*/
-	unsigned char	fd_src[ADDR_LEN];	/* Source address	*/
-						/* Written by 82586	*/
-	unsigned short	fd_length;		/* Frame length or type	*/
-						/* Written by 82586	*/
-};
-
-#define	fdoff(p,f) 	toff(fd_t, p, f)
-
-/*
- * This software may only be used and distributed
- * according to the terms of the GNU General Public License.
- *
- * For more details, see wavelan.c.
- */
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
deleted file mode 100644
index afac5c7a323..00000000000
--- a/drivers/net/wireless/i82593.h
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- * Definitions for Intel 82593 CSMA/CD Core LAN Controller
- * The definitions are taken from the 1992 users manual with Intel
- * order number 297125-001.
- *
- * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
- *
- * Copyright 1994, Anders Klemets <klemets@it.kth.se>
- *
- * HISTORY
- * i82593.h,v
- * Revision 1.4  2005/11/4  09:15:00  baroniunas
- * Modified copyright with permission of author as follows:
- *
- *   "If I82539.H is the only file with my copyright statement
- *    that is included in the Source Forge project, then you have
- *    my approval to change the copyright statement to be a GPL
- *    license, in the way you proposed on October 10."
- *
- * Revision 1.1  1996/07/17 15:23:12  root
- * Initial revision
- *
- * Revision 1.3  1995/04/05  15:13:58  adj
- * Initial alpha release
- *
- * Revision 1.2  1994/06/16  23:57:31  klemets
- * Mirrored all the fields in the configuration block.
- *
- * Revision 1.1  1994/06/02  20:25:34  klemets
- * Initial revision
- *
- *
- */
-#ifndef	_I82593_H
-#define	_I82593_H
-
-/* Intel 82593 CSMA/CD Core LAN Controller */
-
-/* Port 0 Command Register definitions */
-
-/* Execution operations */
-#define OP0_NOP			0	/* CHNL = 0 */
-#define OP0_SWIT_TO_PORT_1	0	/* CHNL = 1 */
-#define OP0_IA_SETUP		1
-#define OP0_CONFIGURE		2
-#define OP0_MC_SETUP		3
-#define OP0_TRANSMIT		4
-#define OP0_TDR			5
-#define OP0_DUMP		6
-#define OP0_DIAGNOSE		7
-#define OP0_TRANSMIT_NO_CRC	9
-#define OP0_RETRANSMIT		12
-#define OP0_ABORT		13
-/* Reception operations */
-#define OP0_RCV_ENABLE		8
-#define OP0_RCV_DISABLE		10
-#define OP0_STOP_RCV		11
-/* Status pointer control operations */
-#define OP0_FIX_PTR		15	/* CHNL = 1 */
-#define OP0_RLS_PTR		15	/* CHNL = 0 */
-#define OP0_RESET		14
-
-#define CR0_CHNL		(1 << 4)	/* 0=Channel 0, 1=Channel 1 */
-#define CR0_STATUS_0		0x00
-#define CR0_STATUS_1		0x20
-#define CR0_STATUS_2		0x40
-#define CR0_STATUS_3		0x60
-#define CR0_INT_ACK		(1 << 7)	/* 0=No ack, 1=acknowledge */
-
-/* Port 0 Status Register definitions */
-
-#define SR0_NO_RESULT		0		/* dummy */
-#define SR0_EVENT_MASK		0x0f
-#define SR0_IA_SETUP_DONE	1
-#define SR0_CONFIGURE_DONE	2
-#define SR0_MC_SETUP_DONE	3
-#define SR0_TRANSMIT_DONE	4
-#define SR0_TDR_DONE		5
-#define SR0_DUMP_DONE		6
-#define SR0_DIAGNOSE_PASSED	7
-#define SR0_TRANSMIT_NO_CRC_DONE 9
-#define SR0_RETRANSMIT_DONE	12
-#define SR0_EXECUTION_ABORTED	13
-#define SR0_END_OF_FRAME	8
-#define SR0_RECEPTION_ABORTED	10
-#define SR0_DIAGNOSE_FAILED	15
-#define SR0_STOP_REG_HIT	11
-
-#define SR0_CHNL		(1 << 4)
-#define SR0_EXECUTION		(1 << 5)
-#define SR0_RECEPTION		(1 << 6)
-#define SR0_INTERRUPT		(1 << 7)
-#define SR0_BOTH_RX_TX		(SR0_EXECUTION | SR0_RECEPTION)
-
-#define SR3_EXEC_STATE_MASK	0x03
-#define SR3_EXEC_IDLE		0
-#define SR3_TX_ABORT_IN_PROGRESS 1
-#define SR3_EXEC_ACTIVE		2
-#define SR3_ABORT_IN_PROGRESS	3
-#define SR3_EXEC_CHNL		(1 << 2)
-#define SR3_STP_ON_NO_RSRC	(1 << 3)
-#define SR3_RCVING_NO_RSRC	(1 << 4)
-#define SR3_RCV_STATE_MASK	0x60
-#define SR3_RCV_IDLE		0x00
-#define SR3_RCV_READY		0x20
-#define SR3_RCV_ACTIVE		0x40
-#define SR3_RCV_STOP_IN_PROG	0x60
-#define SR3_RCV_CHNL		(1 << 7)
-
-/* Port 1 Command Register definitions */
-
-#define OP1_NOP			0
-#define OP1_SWIT_TO_PORT_0	1
-#define OP1_INT_DISABLE		2
-#define OP1_INT_ENABLE		3
-#define OP1_SET_TS		5
-#define OP1_RST_TS		7
-#define OP1_POWER_DOWN		8
-#define OP1_RESET_RING_MNGMT	11
-#define OP1_RESET		14
-#define OP1_SEL_RST		15
-
-#define CR1_STATUS_4		0x00
-#define CR1_STATUS_5		0x20
-#define CR1_STATUS_6		0x40
-#define CR1_STOP_REG_UPDATE	(1 << 7)
-
-/* Receive frame status bits */
-
-#define	RX_RCLD			(1 << 0)
-#define RX_IA_MATCH		(1 << 1)
-#define	RX_NO_AD_MATCH		(1 << 2)
-#define RX_NO_SFD		(1 << 3)
-#define RX_SRT_FRM		(1 << 7)
-#define RX_OVRRUN		(1 << 8)
-#define RX_ALG_ERR		(1 << 10)
-#define RX_CRC_ERR		(1 << 11)
-#define RX_LEN_ERR		(1 << 12)
-#define RX_RCV_OK		(1 << 13)
-#define RX_TYP_LEN		(1 << 15)
-
-/* Transmit status bits */
-
-#define TX_NCOL_MASK		0x0f
-#define TX_FRTL			(1 << 4)
-#define TX_MAX_COL		(1 << 5)
-#define TX_HRT_BEAT		(1 << 6)
-#define TX_DEFER		(1 << 7)
-#define TX_UND_RUN		(1 << 8)
-#define TX_LOST_CTS		(1 << 9)
-#define TX_LOST_CRS		(1 << 10)
-#define TX_LTCOL		(1 << 11)
-#define TX_OK			(1 << 13)
-#define TX_COLL			(1 << 15)
-
-struct i82593_conf_block {
-  u_char fifo_limit : 4,
-  	 forgnesi   : 1,
-  	 fifo_32    : 1,
-  	 d6mod      : 1,
-  	 throttle_enb : 1;
-  u_char throttle   : 6,
-	 cntrxint   : 1,
-	 contin	    : 1;
-  u_char addr_len   : 3,
-  	 acloc 	    : 1,
- 	 preamb_len : 2,
-  	 loopback   : 2;
-  u_char lin_prio   : 3,
-	 tbofstop   : 1,
-	 exp_prio   : 3,
-	 bof_met    : 1;
-  u_char	    : 4,
-	 ifrm_spc   : 4;
-  u_char	    : 5,
-	 slottim_low : 3;
-  u_char slottim_hi : 3,
-		    : 1,
-	 max_retr   : 4;
-  u_char prmisc     : 1,
-	 bc_dis     : 1,
-  		    : 1,
-	 crs_1	    : 1,
-	 nocrc_ins  : 1,
-	 crc_1632   : 1,
-  	 	    : 1,
-  	 crs_cdt    : 1;
-  u_char cs_filter  : 3,
-	 crs_src    : 1,
-	 cd_filter  : 3,
-		    : 1;
-  u_char	    : 2,
-  	 min_fr_len : 6;
-  u_char lng_typ    : 1,
-	 lng_fld    : 1,
-	 rxcrc_xf   : 1,
-	 artx	    : 1,
-	 sarec	    : 1,
-	 tx_jabber  : 1,	/* why is this called max_len in the manual? */
-	 hash_1	    : 1,
-  	 lbpkpol    : 1;
-  u_char	    : 6,
-  	 fdx	    : 1,
-  	  	    : 1;
-  u_char dummy_6    : 6,	/* supposed to be ones */
-  	 mult_ia    : 1,
-  	 dis_bof    : 1;
-  u_char dummy_1    : 1,	/* supposed to be one */
-	 tx_ifs_retrig : 2,
-	 mc_all     : 1,
-	 rcv_mon    : 2,
-	 frag_acpt  : 1,
-  	 tstrttrs   : 1;
-  u_char fretx	    : 1,
-	 runt_eop   : 1,
-	 hw_sw_pin  : 1,
-	 big_endn   : 1,
-	 syncrqs    : 1,
-	 sttlen     : 1,
-	 tx_eop     : 1,
-  	 rx_eop	    : 1;
-  u_char rbuf_size  : 5,
-	 rcvstop    : 1,
-  	 	    : 2;
-};
-
-#define I82593_MAX_MULTICAST_ADDRESSES	128	/* Hardware hashed filter */
-
-#endif /* _I82593_H */
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
deleted file mode 100644
index d634b2da3b8..00000000000
--- a/drivers/net/wireless/wavelan.c
+++ /dev/null
@@ -1,4383 +0,0 @@
-/*
- *	WaveLAN ISA driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- * Original copyright follows (also see the end of this file).
- * See wavelan.p.h for details.
- *
- *
- *
- * AT&T GIS (nee NCR) WaveLAN card:
- *	An Ethernet-like radio transceiver
- *	controlled by an Intel 82586 coprocessor.
- */
-
-#include "wavelan.p.h"		/* Private header */
-
-/************************* MISC SUBROUTINES **************************/
-/*
- * Subroutines which won't fit in one of the following category
- * (WaveLAN modem or i82586)
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Translate irq number to PSA irq parameter
- */
-static u8 wv_irq_to_psa(int irq)
-{
-	if (irq < 0 || irq >= ARRAY_SIZE(irqvals))
-		return 0;
-
-	return irqvals[irq];
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Translate PSA irq parameter to irq number 
- */
-static int __init wv_psa_to_irq(u8 irqval)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(irqvals); i++)
-		if (irqvals[i] == irqval)
-			return i;
-
-	return -1;
-}
-
-/********************* HOST ADAPTER SUBROUTINES *********************/
-/*
- * Useful subroutines to manage the WaveLAN ISA interface
- *
- * One major difference with the PCMCIA hardware (except the port mapping)
- * is that we have to keep the state of the Host Control Register
- * because of the interrupt enable & bus size flags.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Read from card's Host Adaptor Status Register.
- */
-static inline u16 hasr_read(unsigned long ioaddr)
-{
-	return (inw(HASR(ioaddr)));
-}				/* hasr_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register.
- */
-static inline void hacr_write(unsigned long ioaddr, u16 hacr)
-{
-	outw(hacr, HACR(ioaddr));
-}				/* hacr_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register. Include a delay for
- * those times when it is needed.
- */
-static void hacr_write_slow(unsigned long ioaddr, u16 hacr)
-{
-	hacr_write(ioaddr, hacr);
-	/* delay might only be needed sometimes */
-	mdelay(1);
-}				/* hacr_write_slow */
-
-/*------------------------------------------------------------------*/
-/*
- * Set the channel attention bit.
- */
-static inline void set_chan_attn(unsigned long ioaddr, u16 hacr)
-{
-	hacr_write(ioaddr, hacr | HACR_CA);
-}				/* set_chan_attn */
-
-/*------------------------------------------------------------------*/
-/*
- * Reset, and then set host adaptor into default mode.
- */
-static inline void wv_hacr_reset(unsigned long ioaddr)
-{
-	hacr_write_slow(ioaddr, HACR_RESET);
-	hacr_write(ioaddr, HACR_DEFAULT);
-}				/* wv_hacr_reset */
-
-/*------------------------------------------------------------------*/
-/*
- * Set the I/O transfer over the ISA bus to 8-bit mode
- */
-static inline void wv_16_off(unsigned long ioaddr, u16 hacr)
-{
-	hacr &= ~HACR_16BITS;
-	hacr_write(ioaddr, hacr);
-}				/* wv_16_off */
-
-/*------------------------------------------------------------------*/
-/*
- * Set the I/O transfer over the ISA bus to 8-bit mode
- */
-static inline void wv_16_on(unsigned long ioaddr, u16 hacr)
-{
-	hacr |= HACR_16BITS;
-	hacr_write(ioaddr, hacr);
-}				/* wv_16_on */
-
-/*------------------------------------------------------------------*/
-/*
- * Disable interrupts on the WaveLAN hardware.
- * (called by wv_82586_stop())
- */
-static inline void wv_ints_off(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	
-	lp->hacr &= ~HACR_INTRON;
-	hacr_write(ioaddr, lp->hacr);
-}				/* wv_ints_off */
-
-/*------------------------------------------------------------------*/
-/*
- * Enable interrupts on the WaveLAN hardware.
- * (called by wv_hw_reset())
- */
-static inline void wv_ints_on(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-
-	lp->hacr |= HACR_INTRON;
-	hacr_write(ioaddr, lp->hacr);
-}				/* wv_ints_on */
-
-/******************* MODEM MANAGEMENT SUBROUTINES *******************/
-/*
- * Useful subroutines to manage the modem of the WaveLAN
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Read the Parameter Storage Area from the WaveLAN card's memory
- */
-/*
- * Read bytes from the PSA.
- */
-static void psa_read(unsigned long ioaddr, u16 hacr, int o,	/* offset in PSA */
-		     u8 * b,	/* buffer to fill */
-		     int n)
-{				/* size to read */
-	wv_16_off(ioaddr, hacr);
-
-	while (n-- > 0) {
-		outw(o, PIOR2(ioaddr));
-		o++;
-		*b++ = inb(PIOP2(ioaddr));
-	}
-
-	wv_16_on(ioaddr, hacr);
-}				/* psa_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write the Parameter Storage Area to the WaveLAN card's memory.
- */
-static void psa_write(unsigned long ioaddr, u16 hacr, int o,	/* Offset in PSA */
-		      u8 * b,	/* Buffer in memory */
-		      int n)
-{				/* Length of buffer */
-	int count = 0;
-
-	wv_16_off(ioaddr, hacr);
-
-	while (n-- > 0) {
-		outw(o, PIOR2(ioaddr));
-		o++;
-
-		outb(*b, PIOP2(ioaddr));
-		b++;
-
-		/* Wait for the memory to finish its write cycle */
-		count = 0;
-		while ((count++ < 100) &&
-		       (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1);
-	}
-
-	wv_16_on(ioaddr, hacr);
-}				/* psa_write */
-
-#ifdef SET_PSA_CRC
-/*------------------------------------------------------------------*/
-/*
- * Calculate the PSA CRC
- * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
- * NOTE: By specifying a length including the CRC position the
- * returned value should be zero. (i.e. a correct checksum in the PSA)
- *
- * The Windows drivers don't use the CRC, but the AP and the PtP tool
- * depend on it.
- */
-static u16 psa_crc(u8 * psa,	/* The PSA */
-			      int size)
-{				/* Number of short for CRC */
-	int byte_cnt;		/* Loop on the PSA */
-	u16 crc_bytes = 0;	/* Data in the PSA */
-	int bit_cnt;		/* Loop on the bits of the short */
-
-	for (byte_cnt = 0; byte_cnt < size; byte_cnt++) {
-		crc_bytes ^= psa[byte_cnt];	/* Its an xor */
-
-		for (bit_cnt = 1; bit_cnt < 9; bit_cnt++) {
-			if (crc_bytes & 0x0001)
-				crc_bytes = (crc_bytes >> 1) ^ 0xA001;
-			else
-				crc_bytes >>= 1;
-		}
-	}
-
-	return crc_bytes;
-}				/* psa_crc */
-#endif				/* SET_PSA_CRC */
-
-/*------------------------------------------------------------------*/
-/*
- * update the checksum field in the Wavelan's PSA
- */
-static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr)
-{
-#ifdef SET_PSA_CRC
-	psa_t psa;
-	u16 crc;
-
-	/* read the parameter storage area */
-	psa_read(ioaddr, hacr, 0, (unsigned char *) &psa, sizeof(psa));
-
-	/* update the checksum */
-	crc = psa_crc((unsigned char *) &psa,
-		      sizeof(psa) - sizeof(psa.psa_crc[0]) -
-		      sizeof(psa.psa_crc[1])
-		      - sizeof(psa.psa_crc_status));
-
-	psa.psa_crc[0] = crc & 0xFF;
-	psa.psa_crc[1] = (crc & 0xFF00) >> 8;
-
-	/* Write it ! */
-	psa_write(ioaddr, hacr, (char *) &psa.psa_crc - (char *) &psa,
-		  (unsigned char *) &psa.psa_crc, 2);
-
-#ifdef DEBUG_IOCTL_INFO
-	printk(KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
-	       dev->name, psa.psa_crc[0], psa.psa_crc[1]);
-
-	/* Check again (luxury !) */
-	crc = psa_crc((unsigned char *) &psa,
-		      sizeof(psa) - sizeof(psa.psa_crc_status));
-
-	if (crc != 0)
-		printk(KERN_WARNING
-		       "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n",
-		       dev->name);
-#endif				/* DEBUG_IOCTL_INFO */
-#endif				/* SET_PSA_CRC */
-}				/* update_psa_checksum */
-
-/*------------------------------------------------------------------*/
-/*
- * Write 1 byte to the MMC.
- */
-static void mmc_out(unsigned long ioaddr, u16 o, u8 d)
-{
-	int count = 0;
-
-	/* Wait for MMC to go idle */
-	while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
-		udelay(10);
-
-	outw((u16) (((u16) d << 8) | (o << 1) | 1), MMCR(ioaddr));
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to write bytes to the Modem Management Controller.
- * We start at the end because it is the way it should be!
- */
-static void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
-{
-	o += n;
-	b += n;
-
-	while (n-- > 0)
-		mmc_out(ioaddr, --o, *(--b));
-}				/* mmc_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Read a byte from the MMC.
- * Optimised version for 1 byte, avoid using memory.
- */
-static u8 mmc_in(unsigned long ioaddr, u16 o)
-{
-	int count = 0;
-
-	while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
-		udelay(10);
-	outw(o << 1, MMCR(ioaddr));
-
-	while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
-		udelay(10);
-	return (u8) (inw(MMCR(ioaddr)) >> 8);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to read bytes from the Modem Management Controller.
- * The implementation is complicated by a lack of address lines,
- * which prevents decoding of the low-order bit.
- * (code has just been moved in the above function)
- * We start at the end because it is the way it should be!
- */
-static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n)
-{
-	o += n;
-	b += n;
-
-	while (n-- > 0)
-		*(--b) = mmc_in(ioaddr, --o);
-}				/* mmc_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Get the type of encryption available.
- */
-static inline int mmc_encr(unsigned long ioaddr)
-{				/* I/O port of the card */
-	int temp;
-
-	temp = mmc_in(ioaddr, mmroff(0, mmr_des_avail));
-	if ((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
-		return 0;
-	else
-		return temp;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wait for the frequency EEPROM to complete a command.
- * I hope this one will be optimally inlined.
- */
-static inline void fee_wait(unsigned long ioaddr,	/* I/O port of the card */
-			    int delay,	/* Base delay to wait for */
-			    int number)
-{				/* Number of time to wait */
-	int count = 0;		/* Wait only a limited time */
-
-	while ((count++ < number) &&
-	       (mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-		MMR_FEE_STATUS_BUSY)) udelay(delay);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Read bytes from the Frequency EEPROM (frequency select cards).
- */
-static void fee_read(unsigned long ioaddr,	/* I/O port of the card */
-		     u16 o,	/* destination offset */
-		     u16 * b,	/* data buffer */
-		     int n)
-{				/* number of registers */
-	b += n;			/* Position at the end of the area */
-
-	/* Write the address */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-	/* Loop on all buffer */
-	while (n-- > 0) {
-		/* Write the read command */
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
-			MMW_FEE_CTRL_READ);
-
-		/* Wait until EEPROM is ready (should be quick). */
-		fee_wait(ioaddr, 10, 100);
-
-		/* Read the value. */
-		*--b = ((mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)) << 8) |
-			mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
-	}
-}
-
-
-/*------------------------------------------------------------------*/
-/*
- * Write bytes from the Frequency EEPROM (frequency select cards).
- * This is a bit complicated, because the frequency EEPROM has to
- * be unprotected and the write enabled.
- * Jean II
- */
-static void fee_write(unsigned long ioaddr,	/* I/O port of the card */
-		      u16 o,	/* destination offset */
-		      u16 * b,	/* data buffer */
-		      int n)
-{				/* number of registers */
-	b += n;			/* Position at the end of the area. */
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-	/* Ask to read the protected register */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
-
-	fee_wait(ioaddr, 10, 100);
-
-	/* Read the protected register. */
-	printk("Protected 2:  %02X-%02X\n",
-	       mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)),
-	       mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
-#endif				/* DOESNT_SEEM_TO_WORK */
-
-	/* Enable protected register. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
-
-	fee_wait(ioaddr, 10, 100);
-
-	/* Unprotect area. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n);
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-	/* or use: */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
-#endif				/* DOESNT_SEEM_TO_WORK */
-
-	fee_wait(ioaddr, 10, 100);
-#endif				/* EEPROM_IS_PROTECTED */
-
-	/* Write enable. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
-
-	fee_wait(ioaddr, 10, 100);
-
-	/* Write the EEPROM address. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-	/* Loop on all buffer */
-	while (n-- > 0) {
-		/* Write the value. */
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
-
-		/* Write the write command. */
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
-			MMW_FEE_CTRL_WRITE);
-
-		/* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */
-		mdelay(10);
-		fee_wait(ioaddr, 10, 100);
-	}
-
-	/* Write disable. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
-
-	fee_wait(ioaddr, 10, 100);
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-	/* Reprotect EEPROM. */
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x00);
-	mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-
-	fee_wait(ioaddr, 10, 100);
-#endif				/* EEPROM_IS_PROTECTED */
-}
-
-/************************ I82586 SUBROUTINES *************************/
-/*
- * Useful subroutines to manage the Ethernet controller
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Read bytes from the on-board RAM.
- * Why does inlining this function make it fail?
- */
-static /*inline */ void obram_read(unsigned long ioaddr,
-				   u16 o, u8 * b, int n)
-{
-	outw(o, PIOR1(ioaddr));
-	insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Write bytes to the on-board RAM.
- */
-static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n)
-{
-	outw(o, PIOR1(ioaddr));
-	outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Acknowledge the reading of the status issued by the i82586.
- */
-static void wv_ack(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	u16 scb_cs;
-	int i;
-
-	obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
-		   (unsigned char *) &scb_cs, sizeof(scb_cs));
-	scb_cs &= SCB_ST_INT;
-
-	if (scb_cs == 0)
-		return;
-
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &scb_cs, sizeof(scb_cs));
-
-	set_chan_attn(ioaddr, lp->hacr);
-
-	for (i = 1000; i > 0; i--) {
-		obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
-			   (unsigned char *) &scb_cs, sizeof(scb_cs));
-		if (scb_cs == 0)
-			break;
-
-		udelay(10);
-	}
-	udelay(100);
-
-#ifdef DEBUG_CONFIG_ERROR
-	if (i <= 0)
-		printk(KERN_INFO
-		       "%s: wv_ack(): board not accepting command.\n",
-		       dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Set channel attention bit and busy wait until command has
- * completed, then acknowledge completion of the command.
- */
-static int wv_synchronous_cmd(struct net_device * dev, const char *str)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	u16 scb_cmd;
-	ach_t cb;
-	int i;
-
-	scb_cmd = SCB_CMD_CUC & SCB_CMD_CUC_GO;
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &scb_cmd, sizeof(scb_cmd));
-
-	set_chan_attn(ioaddr, lp->hacr);
-
-	for (i = 1000; i > 0; i--) {
-		obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb,
-			   sizeof(cb));
-		if (cb.ac_status & AC_SFLD_C)
-			break;
-
-		udelay(10);
-	}
-	udelay(100);
-
-	if (i <= 0 || !(cb.ac_status & AC_SFLD_OK)) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO "%s: %s failed; status = 0x%x\n",
-		       dev->name, str, cb.ac_status);
-#endif
-#ifdef DEBUG_I82586_SHOW
-		wv_scb_show(ioaddr);
-#endif
-		return -1;
-	}
-
-	/* Ack the status */
-	wv_ack(dev);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Configuration commands completion interrupt.
- * Check if done, and if OK.
- */
-static int
-wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
-{
-	unsigned short mcs_addr;
-	unsigned short status;
-	int ret;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: ->wv_config_complete()\n", dev->name);
-#endif
-
-	mcs_addr = lp->tx_first_in_use + sizeof(ac_tx_t) + sizeof(ac_nop_t)
-	    + sizeof(tbd_t) + sizeof(ac_cfg_t) + sizeof(ac_ias_t);
-
-	/* Read the status of the last command (set mc list). */
-	obram_read(ioaddr, acoff(mcs_addr, ac_status),
-		   (unsigned char *) &status, sizeof(status));
-
-	/* If not completed -> exit */
-	if ((status & AC_SFLD_C) == 0)
-		ret = 0;	/* Not ready to be scrapped */
-	else {
-#ifdef DEBUG_CONFIG_ERROR
-		unsigned short cfg_addr;
-		unsigned short ias_addr;
-
-		/* Check mc_config command */
-		if ((status & AC_SFLD_OK) != AC_SFLD_OK)
-			printk(KERN_INFO
-			       "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n",
-			       dev->name, status);
-
-		/* check ia-config command */
-		ias_addr = mcs_addr - sizeof(ac_ias_t);
-		obram_read(ioaddr, acoff(ias_addr, ac_status),
-			   (unsigned char *) &status, sizeof(status));
-		if ((status & AC_SFLD_OK) != AC_SFLD_OK)
-			printk(KERN_INFO
-			       "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n",
-			       dev->name, status);
-
-		/* Check config command. */
-		cfg_addr = ias_addr - sizeof(ac_cfg_t);
-		obram_read(ioaddr, acoff(cfg_addr, ac_status),
-			   (unsigned char *) &status, sizeof(status));
-		if ((status & AC_SFLD_OK) != AC_SFLD_OK)
-			printk(KERN_INFO
-			       "%s: wv_config_complete(): configure failed; status = 0x%x\n",
-			       dev->name, status);
-#endif	/* DEBUG_CONFIG_ERROR */
-
-		ret = 1;	/* Ready to be scrapped */
-	}
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: <-wv_config_complete() - %d\n", dev->name,
-	       ret);
-#endif
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Command completion interrupt.
- * Reclaim as many freed tx buffers as we can.
- * (called in wavelan_interrupt()).
- * Note : the spinlock is already grabbed for us.
- */
-static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
-{
-	int nreaped = 0;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: ->wv_complete()\n", dev->name);
-#endif
-
-	/* Loop on all the transmit buffers */
-	while (lp->tx_first_in_use != I82586NULL) {
-		unsigned short tx_status;
-
-		/* Read the first transmit buffer */
-		obram_read(ioaddr, acoff(lp->tx_first_in_use, ac_status),
-			   (unsigned char *) &tx_status,
-			   sizeof(tx_status));
-
-		/* If not completed -> exit */
-		if ((tx_status & AC_SFLD_C) == 0)
-			break;
-
-		/* Hack for reconfiguration */
-		if (tx_status == 0xFFFF)
-			if (!wv_config_complete(dev, ioaddr, lp))
-				break;	/* Not completed */
-
-		/* We now remove this buffer */
-		nreaped++;
-		--lp->tx_n_in_use;
-
-/*
-if (lp->tx_n_in_use > 0)
-	printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]);
-*/
-
-		/* Was it the last one? */
-		if (lp->tx_n_in_use <= 0)
-			lp->tx_first_in_use = I82586NULL;
-		else {
-			/* Next one in the chain */
-			lp->tx_first_in_use += TXBLOCKZ;
-			if (lp->tx_first_in_use >=
-			    OFFSET_CU +
-			    NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -=
-				    NTXBLOCKS * TXBLOCKZ;
-		}
-
-		/* Hack for reconfiguration */
-		if (tx_status == 0xFFFF)
-			continue;
-
-		/* Now, check status of the finished command */
-		if (tx_status & AC_SFLD_OK) {
-			int ncollisions;
-
-			dev->stats.tx_packets++;
-			ncollisions = tx_status & AC_SFLD_MAXCOL;
-			dev->stats.collisions += ncollisions;
-#ifdef DEBUG_TX_INFO
-			if (ncollisions > 0)
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx completed after %d collisions.\n",
-				       dev->name, ncollisions);
-#endif
-		} else {
-			dev->stats.tx_errors++;
-			if (tx_status & AC_SFLD_S10) {
-				dev->stats.tx_carrier_errors++;
-#ifdef DEBUG_TX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx error: no CS.\n",
-				       dev->name);
-#endif
-			}
-			if (tx_status & AC_SFLD_S9) {
-				dev->stats.tx_carrier_errors++;
-#ifdef DEBUG_TX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx error: lost CTS.\n",
-				       dev->name);
-#endif
-			}
-			if (tx_status & AC_SFLD_S8) {
-				dev->stats.tx_fifo_errors++;
-#ifdef DEBUG_TX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx error: slow DMA.\n",
-				       dev->name);
-#endif
-			}
-			if (tx_status & AC_SFLD_S6) {
-				dev->stats.tx_heartbeat_errors++;
-#ifdef DEBUG_TX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx error: heart beat.\n",
-				       dev->name);
-#endif
-			}
-			if (tx_status & AC_SFLD_S5) {
-				dev->stats.tx_aborted_errors++;
-#ifdef DEBUG_TX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_complete(): tx error: too many collisions.\n",
-				       dev->name);
-#endif
-			}
-		}
-
-#ifdef DEBUG_TX_INFO
-		printk(KERN_DEBUG
-		       "%s: wv_complete(): tx completed, tx_status 0x%04x\n",
-		       dev->name, tx_status);
-#endif
-	}
-
-#ifdef DEBUG_INTERRUPT_INFO
-	if (nreaped > 1)
-		printk(KERN_DEBUG "%s: wv_complete(): reaped %d\n",
-		       dev->name, nreaped);
-#endif
-
-	/*
-	 * Inform upper layers.
-	 */
-	if (lp->tx_n_in_use < NTXBLOCKS - 1) {
-		netif_wake_queue(dev);
-	}
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name);
-#endif
-	return nreaped;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Reconfigure the i82586, or at least ask for it.
- * Because wv_82586_config uses a transmission buffer, we must do it
- * when we are sure that there is one left, so we do it now
- * or in wavelan_packet_xmit() (I can't find any better place,
- * wavelan_interrupt is not an option), so you may experience
- * delays sometimes.
- */
-static void wv_82586_reconfig(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	/* Arm the flag, will be cleard in wv_82586_config() */
-	lp->reconfig_82586 = 1;
-
-	/* Check if we can do it now ! */
-	if((netif_running(dev)) && !(netif_queue_stopped(dev))) {
-		spin_lock_irqsave(&lp->spinlock, flags);
-		/* May fail */
-		wv_82586_config(dev);
-		spin_unlock_irqrestore(&lp->spinlock, flags);
-	}
-	else {
-#ifdef DEBUG_CONFIG_INFO
-		printk(KERN_DEBUG
-		       "%s: wv_82586_reconfig(): delayed (state = %lX)\n",
-			       dev->name, dev->state);
-#endif
-	}
-}
-
-/********************* DEBUG & INFO SUBROUTINES *********************/
-/*
- * This routine is used in the code to show information for debugging.
- * Most of the time, it dumps the contents of hardware structures.
- */
-
-#ifdef DEBUG_PSA_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted contents of the Parameter Storage Area.
- */
-static void wv_psa_show(psa_t * p)
-{
-	printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n");
-	printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
-	       p->psa_io_base_addr_1,
-	       p->psa_io_base_addr_2,
-	       p->psa_io_base_addr_3, p->psa_io_base_addr_4);
-	printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
-	       p->psa_rem_boot_addr_1,
-	       p->psa_rem_boot_addr_2, p->psa_rem_boot_addr_3);
-	printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
-	printk("psa_int_req_no: %d\n", p->psa_int_req_no);
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0);
-#endif				/* DEBUG_SHOW_UNUSED */
-	printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr);
-	printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr);
-	printk(KERN_DEBUG "psa_univ_local_sel: %d, ",
-	       p->psa_univ_local_sel);
-	printk("psa_comp_number: %d, ", p->psa_comp_number);
-	printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
-	printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
-	       p->psa_feature_select);
-	printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
-	printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
-	printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
-	printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0],
-	       p->psa_nwid[1]);
-	printk("psa_nwid_select: %d\n", p->psa_nwid_select);
-	printk(KERN_DEBUG "psa_encryption_select: %d, ",
-	       p->psa_encryption_select);
-	printk
-	    ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-	     p->psa_encryption_key[0], p->psa_encryption_key[1],
-	     p->psa_encryption_key[2], p->psa_encryption_key[3],
-	     p->psa_encryption_key[4], p->psa_encryption_key[5],
-	     p->psa_encryption_key[6], p->psa_encryption_key[7]);
-	printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
-	printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
-	       p->psa_call_code[0]);
-	printk
-	    ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	     p->psa_call_code[0], p->psa_call_code[1], p->psa_call_code[2],
-	     p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5],
-	     p->psa_call_code[6], p->psa_call_code[7]);
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
-	       p->psa_reserved[0],
-	       p->psa_reserved[1]);
-#endif				/* DEBUG_SHOW_UNUSED */
-	printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
-	printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
-	printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
-}				/* wv_psa_show */
-#endif				/* DEBUG_PSA_SHOW */
-
-#ifdef DEBUG_MMC_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the Modem Management Controller.
- * This function needs to be completed.
- */
-static void wv_mmc_show(struct net_device * dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	mmr_t m;
-
-	/* Basic check */
-	if (hasr_read(ioaddr) & HASR_NO_CLK) {
-		printk(KERN_WARNING
-		       "%s: wv_mmc_show: modem not connected\n",
-		       dev->name);
-		return;
-	}
-
-	/* Read the mmc */
-	mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
-	mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
-	mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
-
-	/* Don't forget to update statistics */
-	lp->wstats.discard.nwid +=
-	    (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-
-	printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n");
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG
-	       "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	       m.mmr_unused0[0], m.mmr_unused0[1], m.mmr_unused0[2],
-	       m.mmr_unused0[3], m.mmr_unused0[4], m.mmr_unused0[5],
-	       m.mmr_unused0[6], m.mmr_unused0[7]);
-#endif				/* DEBUG_SHOW_UNUSED */
-	printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
-	       m.mmr_des_avail, m.mmr_des_status);
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
-	       m.mmr_unused1[0],
-	       m.mmr_unused1[1],
-	       m.mmr_unused1[2], m.mmr_unused1[3], m.mmr_unused1[4]);
-#endif				/* DEBUG_SHOW_UNUSED */
-	printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
-	       m.mmr_dce_status,
-	       (m.
-		mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ?
-	       "energy detected," : "",
-	       (m.
-		mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
-	       "loop test indicated," : "",
-	       (m.
-		mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ?
-	       "transmitter on," : "",
-	       (m.
-		mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
-	       "jabber timer expired," : "");
-	printk(KERN_DEBUG "Dsp ID: %02X\n", m.mmr_dsp_id);
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
-	       m.mmr_unused2[0], m.mmr_unused2[1]);
-#endif				/* DEBUG_SHOW_UNUSED */
-	printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
-	       (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
-	       (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
-	printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
-	       m.mmr_thr_pre_set & MMR_THR_PRE_SET,
-	       (m.
-		mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" :
-	       "below");
-	printk(KERN_DEBUG "signal_lvl: %d [%s], ",
-	       m.mmr_signal_lvl & MMR_SIGNAL_LVL,
-	       (m.
-		mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" :
-	       "no new msg");
-	printk("silence_lvl: %d [%s], ",
-	       m.mmr_silence_lvl & MMR_SILENCE_LVL,
-	       (m.
-		mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" :
-	       "no new update");
-	printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
-	       (m.
-		mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" :
-	       "Antenna 0");
-#ifdef DEBUG_SHOW_UNUSED
-	printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
-#endif				/* DEBUG_SHOW_UNUSED */
-}				/* wv_mmc_show */
-#endif				/* DEBUG_MMC_SHOW */
-
-#ifdef DEBUG_I82586_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the last block of the i82586 memory.
- */
-static void wv_scb_show(unsigned long ioaddr)
-{
-	scb_t scb;
-
-	obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
-		   sizeof(scb));
-
-	printk(KERN_DEBUG "##### WaveLAN system control block: #####\n");
-
-	printk(KERN_DEBUG "status: ");
-	printk("stat 0x%x[%s%s%s%s] ",
-	       (scb.
-		scb_status & (SCB_ST_CX | SCB_ST_FR | SCB_ST_CNA |
-			      SCB_ST_RNR)) >> 12,
-	       (scb.
-		scb_status & SCB_ST_CX) ? "command completion interrupt," :
-	       "", (scb.scb_status & SCB_ST_FR) ? "frame received," : "",
-	       (scb.
-		scb_status & SCB_ST_CNA) ? "command unit not active," : "",
-	       (scb.
-		scb_status & SCB_ST_RNR) ? "receiving unit not ready," :
-	       "");
-	printk("cus 0x%x[%s%s%s] ", (scb.scb_status & SCB_ST_CUS) >> 8,
-	       ((scb.scb_status & SCB_ST_CUS) ==
-		SCB_ST_CUS_IDLE) ? "idle" : "",
-	       ((scb.scb_status & SCB_ST_CUS) ==
-		SCB_ST_CUS_SUSP) ? "suspended" : "",
-	       ((scb.scb_status & SCB_ST_CUS) ==
-		SCB_ST_CUS_ACTV) ? "active" : "");
-	printk("rus 0x%x[%s%s%s%s]\n", (scb.scb_status & SCB_ST_RUS) >> 4,
-	       ((scb.scb_status & SCB_ST_RUS) ==
-		SCB_ST_RUS_IDLE) ? "idle" : "",
-	       ((scb.scb_status & SCB_ST_RUS) ==
-		SCB_ST_RUS_SUSP) ? "suspended" : "",
-	       ((scb.scb_status & SCB_ST_RUS) ==
-		SCB_ST_RUS_NRES) ? "no resources" : "",
-	       ((scb.scb_status & SCB_ST_RUS) ==
-		SCB_ST_RUS_RDY) ? "ready" : "");
-
-	printk(KERN_DEBUG "command: ");
-	printk("ack 0x%x[%s%s%s%s] ",
-	       (scb.
-		scb_command & (SCB_CMD_ACK_CX | SCB_CMD_ACK_FR |
-			       SCB_CMD_ACK_CNA | SCB_CMD_ACK_RNR)) >> 12,
-	       (scb.
-		scb_command & SCB_CMD_ACK_CX) ? "ack cmd completion," : "",
-	       (scb.
-		scb_command & SCB_CMD_ACK_FR) ? "ack frame received," : "",
-	       (scb.
-		scb_command & SCB_CMD_ACK_CNA) ? "ack CU not active," : "",
-	       (scb.
-		scb_command & SCB_CMD_ACK_RNR) ? "ack RU not ready," : "");
-	printk("cuc 0x%x[%s%s%s%s%s] ",
-	       (scb.scb_command & SCB_CMD_CUC) >> 8,
-	       ((scb.scb_command & SCB_CMD_CUC) ==
-		SCB_CMD_CUC_NOP) ? "nop" : "",
-	       ((scb.scb_command & SCB_CMD_CUC) ==
-		SCB_CMD_CUC_GO) ? "start cbl_offset" : "",
-	       ((scb.scb_command & SCB_CMD_CUC) ==
-		SCB_CMD_CUC_RES) ? "resume execution" : "",
-	       ((scb.scb_command & SCB_CMD_CUC) ==
-		SCB_CMD_CUC_SUS) ? "suspend execution" : "",
-	       ((scb.scb_command & SCB_CMD_CUC) ==
-		SCB_CMD_CUC_ABT) ? "abort execution" : "");
-	printk("ruc 0x%x[%s%s%s%s%s]\n",
-	       (scb.scb_command & SCB_CMD_RUC) >> 4,
-	       ((scb.scb_command & SCB_CMD_RUC) ==
-		SCB_CMD_RUC_NOP) ? "nop" : "",
-	       ((scb.scb_command & SCB_CMD_RUC) ==
-		SCB_CMD_RUC_GO) ? "start rfa_offset" : "",
-	       ((scb.scb_command & SCB_CMD_RUC) ==
-		SCB_CMD_RUC_RES) ? "resume reception" : "",
-	       ((scb.scb_command & SCB_CMD_RUC) ==
-		SCB_CMD_RUC_SUS) ? "suspend reception" : "",
-	       ((scb.scb_command & SCB_CMD_RUC) ==
-		SCB_CMD_RUC_ABT) ? "abort reception" : "");
-
-	printk(KERN_DEBUG "cbl_offset 0x%x ", scb.scb_cbl_offset);
-	printk("rfa_offset 0x%x\n", scb.scb_rfa_offset);
-
-	printk(KERN_DEBUG "crcerrs %d ", scb.scb_crcerrs);
-	printk("alnerrs %d ", scb.scb_alnerrs);
-	printk("rscerrs %d ", scb.scb_rscerrs);
-	printk("ovrnerrs %d\n", scb.scb_ovrnerrs);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the i82586's receive unit.
- */
-static void wv_ru_show(struct net_device * dev)
-{
-	printk(KERN_DEBUG
-	       "##### WaveLAN i82586 receiver unit status: #####\n");
-	printk(KERN_DEBUG "ru:");
-	/*
-	 * Not implemented yet
-	 */
-	printk("\n");
-}				/* wv_ru_show */
-
-/*------------------------------------------------------------------*/
-/*
- * Display info about one control block of the i82586 memory.
- */
-static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p)
-{
-	unsigned long ioaddr;
-	ac_tx_t actx;
-
-	ioaddr = dev->base_addr;
-
-	printk("%d: 0x%x:", i, p);
-
-	obram_read(ioaddr, p, (unsigned char *) &actx, sizeof(actx));
-	printk(" status=0x%x,", actx.tx_h.ac_status);
-	printk(" command=0x%x,", actx.tx_h.ac_command);
-
-	/*
-	   {
-	   tbd_t      tbd;
-
-	   obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd));
-	   printk(" tbd_status=0x%x,", tbd.tbd_status);
-	   }
-	 */
-
-	printk("|");
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Print status of the command unit of the i82586.
- */
-static void wv_cu_show(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned int i;
-	u16 p;
-
-	printk(KERN_DEBUG
-	       "##### WaveLAN i82586 command unit status: #####\n");
-
-	printk(KERN_DEBUG);
-	for (i = 0, p = lp->tx_first_in_use; i < NTXBLOCKS; i++) {
-		wv_cu_show_one(dev, lp, i, p);
-
-		p += TXBLOCKZ;
-		if (p >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
-			p -= NTXBLOCKS * TXBLOCKZ;
-	}
-	printk("\n");
-}
-#endif				/* DEBUG_I82586_SHOW */
-
-#ifdef DEBUG_DEVICE_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver.
- */
-static void wv_dev_show(struct net_device * dev)
-{
-	printk(KERN_DEBUG "dev:");
-	printk(" state=%lX,", dev->state);
-	printk(" trans_start=%ld,", dev->trans_start);
-	printk(" flags=0x%x,", dev->flags);
-	printk("\n");
-}				/* wv_dev_show */
-
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver's
- * private information.
- */
-static void wv_local_show(struct net_device * dev)
-{
-	net_local *lp;
-
-	lp = netdev_priv(dev);
-
-	printk(KERN_DEBUG "local:");
-	printk(" tx_n_in_use=%d,", lp->tx_n_in_use);
-	printk(" hacr=0x%x,", lp->hacr);
-	printk(" rx_head=0x%x,", lp->rx_head);
-	printk(" rx_last=0x%x,", lp->rx_last);
-	printk(" tx_first_free=0x%x,", lp->tx_first_free);
-	printk(" tx_first_in_use=0x%x,", lp->tx_first_in_use);
-	printk("\n");
-}				/* wv_local_show */
-#endif				/* DEBUG_DEVICE_SHOW */
-
-#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
-/*------------------------------------------------------------------*/
-/*
- * Dump packet header (and content if necessary) on the screen
- */
-static inline void wv_packet_info(u8 * p,	/* Packet to dump */
-				  int length,	/* Length of the packet */
-				  char *msg1,	/* Name of the device */
-				  char *msg2)
-{				/* Name of the function */
-	int i;
-	int maxi;
-
-	printk(KERN_DEBUG
-	       "%s: %s(): dest %pM, length %d\n",
-	       msg1, msg2, p, length);
-	printk(KERN_DEBUG
-	       "%s: %s(): src %pM, type 0x%02X%02X\n",
-	       msg1, msg2, &p[6], p[12], p[13]);
-
-#ifdef DEBUG_PACKET_DUMP
-
-	printk(KERN_DEBUG "data=\"");
-
-	if ((maxi = length) > DEBUG_PACKET_DUMP)
-		maxi = DEBUG_PACKET_DUMP;
-	for (i = 14; i < maxi; i++)
-		if (p[i] >= ' ' && p[i] <= '~')
-			printk(" %c", p[i]);
-		else
-			printk("%02X", p[i]);
-	if (maxi < length)
-		printk("..");
-	printk("\"\n");
-	printk(KERN_DEBUG "\n");
-#endif				/* DEBUG_PACKET_DUMP */
-}
-#endif				/* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
-
-/*------------------------------------------------------------------*/
-/*
- * This is the information which is displayed by the driver at startup.
- * There are lots of flags for configuring it to your liking.
- */
-static void wv_init_info(struct net_device * dev)
-{
-	short ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-
-	/* Read the parameter storage area */
-	psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
-
-#ifdef DEBUG_PSA_SHOW
-	wv_psa_show(&psa);
-#endif
-#ifdef DEBUG_MMC_SHOW
-	wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82586_SHOW
-	wv_cu_show(dev);
-#endif
-
-#ifdef DEBUG_BASIC_SHOW
-	/* Now, let's go for the basic stuff. */
-	printk(KERN_NOTICE "%s: WaveLAN at %#x, %pM, IRQ %d",
-	       dev->name, ioaddr, dev->dev_addr, dev->irq);
-
-	/* Print current network ID. */
-	if (psa.psa_nwid_select)
-		printk(", nwid 0x%02X-%02X", psa.psa_nwid[0],
-		       psa.psa_nwid[1]);
-	else
-		printk(", nwid off");
-
-	/* If 2.00 card */
-	if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		unsigned short freq;
-
-		/* Ask the EEPROM to read the frequency from the first area. */
-		fee_read(ioaddr, 0x00, &freq, 1);
-
-		/* Print frequency */
-		printk(", 2.00, %ld", (freq >> 6) + 2400L);
-
-		/* Hack! */
-		if (freq & 0x20)
-			printk(".5");
-	} else {
-		printk(", PC");
-		switch (psa.psa_comp_number) {
-		case PSA_COMP_PC_AT_915:
-		case PSA_COMP_PC_AT_2400:
-			printk("-AT");
-			break;
-		case PSA_COMP_PC_MC_915:
-		case PSA_COMP_PC_MC_2400:
-			printk("-MC");
-			break;
-		case PSA_COMP_PCMCIA_915:
-			printk("MCIA");
-			break;
-		default:
-			printk("?");
-		}
-		printk(", ");
-		switch (psa.psa_subband) {
-		case PSA_SUBBAND_915:
-			printk("915");
-			break;
-		case PSA_SUBBAND_2425:
-			printk("2425");
-			break;
-		case PSA_SUBBAND_2460:
-			printk("2460");
-			break;
-		case PSA_SUBBAND_2484:
-			printk("2484");
-			break;
-		case PSA_SUBBAND_2430_5:
-			printk("2430.5");
-			break;
-		default:
-			printk("?");
-		}
-	}
-
-	printk(" MHz\n");
-#endif				/* DEBUG_BASIC_SHOW */
-
-#ifdef DEBUG_VERSION_SHOW
-	/* Print version information */
-	printk(KERN_NOTICE "%s", version);
-#endif
-}				/* wv_init_info */
-
-/********************* IOCTL, STATS & RECONFIG *********************/
-/*
- * We found here routines that are called by Linux on different
- * occasions after the configuration and not for transmitting data
- * These may be called when the user use ifconfig, /proc/net/dev
- * or wireless extensions
- */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1	Promiscuous mode, receive all packets
- * num_addrs == 0	Normal mode, clear multicast list
- * num_addrs > 0	Multicast mode, receive normal and MC packets,
- *			and do best-effort filtering.
- */
-static void wavelan_set_multicast_list(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-
-#ifdef DEBUG_IOCTL_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n",
-	       dev->name);
-#endif
-
-#ifdef DEBUG_IOCTL_INFO
-	printk(KERN_DEBUG
-	       "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
-	       dev->name, dev->flags, dev->mc_count);
-#endif
-
-	/* Are we asking for promiscuous mode,
-	 * or all multicast addresses (we don't have that!)
-	 * or too many multicast addresses for the hardware filter? */
-	if ((dev->flags & IFF_PROMISC) ||
-	    (dev->flags & IFF_ALLMULTI) ||
-	    (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) {
-		/*
-		 * Enable promiscuous mode: receive all packets.
-		 */
-		if (!lp->promiscuous) {
-			lp->promiscuous = 1;
-			lp->mc_count = 0;
-
-			wv_82586_reconfig(dev);
-		}
-	} else
-		/* Are there multicast addresses to send? */
-	if (dev->mc_list != (struct dev_mc_list *) NULL) {
-		/*
-		 * Disable promiscuous mode, but receive all packets
-		 * in multicast list
-		 */
-#ifdef MULTICAST_AVOID
-		if (lp->promiscuous || (dev->mc_count != lp->mc_count))
-#endif
-		{
-			lp->promiscuous = 0;
-			lp->mc_count = dev->mc_count;
-
-			wv_82586_reconfig(dev);
-		}
-	} else {
-		/*
-		 * Switch to normal mode: disable promiscuous mode and 
-		 * clear the multicast list.
-		 */
-		if (lp->promiscuous || lp->mc_count == 0) {
-			lp->promiscuous = 0;
-			lp->mc_count = 0;
-
-			wv_82586_reconfig(dev);
-		}
-	}
-#ifdef DEBUG_IOCTL_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n",
-	       dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This function doesn't exist.
- * (Note : it was a nice way to test the reconfigure stuff...)
- */
-#ifdef SET_MAC_ADDRESS
-static int wavelan_set_mac_address(struct net_device * dev, void *addr)
-{
-	struct sockaddr *mac = addr;
-
-	/* Copy the address. */
-	memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
-
-	/* Reconfigure the beast. */
-	wv_82586_reconfig(dev);
-
-	return 0;
-}
-#endif				/* SET_MAC_ADDRESS */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Frequency setting (for hardware capable of it)
- * It's a bit complicated and you don't really want to look into it.
- * (called in wavelan_ioctl)
- */
-static int wv_set_frequency(unsigned long ioaddr,	/* I/O port of the card */
-				   iw_freq * frequency)
-{
-	const int BAND_NUM = 10;	/* Number of bands */
-	long freq = 0L;		/* offset to 2.4 GHz in .5 MHz */
-#ifdef DEBUG_IOCTL_INFO
-	int i;
-#endif
-
-	/* Setting by frequency */
-	/* Theoretically, you may set any frequency between
-	 * the two limits with a 0.5 MHz precision. In practice,
-	 * I don't want you to have trouble with local regulations.
-	 */
-	if ((frequency->e == 1) &&
-	    (frequency->m >= (int) 2.412e8)
-	    && (frequency->m <= (int) 2.487e8)) {
-		freq = ((frequency->m / 10000) - 24000L) / 5;
-	}
-
-	/* Setting by channel (same as wfreqsel) */
-	/* Warning: each channel is 22 MHz wide, so some of the channels
-	 * will interfere. */
-	if ((frequency->e == 0) && (frequency->m < BAND_NUM)) {
-		/* Get frequency offset. */
-		freq = channel_bands[frequency->m] >> 1;
-	}
-
-	/* Verify that the frequency is allowed. */
-	if (freq != 0L) {
-		u16 table[10];	/* Authorized frequency table */
-
-		/* Read the frequency table. */
-		fee_read(ioaddr, 0x71, table, 10);
-
-#ifdef DEBUG_IOCTL_INFO
-		printk(KERN_DEBUG "Frequency table: ");
-		for (i = 0; i < 10; i++) {
-			printk(" %04X", table[i]);
-		}
-		printk("\n");
-#endif
-
-		/* Look in the table to see whether the frequency is allowed. */
-		if (!(table[9 - ((freq - 24) / 16)] &
-		      (1 << ((freq - 24) % 16)))) return -EINVAL;	/* not allowed */
-	} else
-		return -EINVAL;
-
-	/* if we get a usable frequency */
-	if (freq != 0L) {
-		unsigned short area[16];
-		unsigned short dac[2];
-		unsigned short area_verify[16];
-		unsigned short dac_verify[2];
-		/* Corresponding gain (in the power adjust value table)
-		 * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8
-		 * and WCIN062D.DOC, page 6.2.9. */
-		unsigned short power_limit[] = { 40, 80, 120, 160, 0 };
-		int power_band = 0;	/* Selected band */
-		unsigned short power_adjust;	/* Correct value */
-
-		/* Search for the gain. */
-		power_band = 0;
-		while ((freq > power_limit[power_band]) &&
-		       (power_limit[++power_band] != 0));
-
-		/* Read the first area. */
-		fee_read(ioaddr, 0x00, area, 16);
-
-		/* Read the DAC. */
-		fee_read(ioaddr, 0x60, dac, 2);
-
-		/* Read the new power adjust value. */
-		fee_read(ioaddr, 0x6B - (power_band >> 1), &power_adjust,
-			 1);
-		if (power_band & 0x1)
-			power_adjust >>= 8;
-		else
-			power_adjust &= 0xFF;
-
-#ifdef DEBUG_IOCTL_INFO
-		printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
-		for (i = 0; i < 16; i++) {
-			printk(" %04X", area[i]);
-		}
-		printk("\n");
-
-		printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n",
-		       dac[0], dac[1]);
-#endif
-
-		/* Frequency offset (for info only) */
-		area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
-
-		/* Receiver Principle main divider coefficient */
-		area[3] = (freq >> 1) + 2400L - 352L;
-		area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-		/* Transmitter Main divider coefficient */
-		area[13] = (freq >> 1) + 2400L;
-		area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-		/* Other parts of the area are flags, bit streams or unused. */
-
-		/* Set the value in the DAC. */
-		dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
-		dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
-
-		/* Write the first area. */
-		fee_write(ioaddr, 0x00, area, 16);
-
-		/* Write the DAC. */
-		fee_write(ioaddr, 0x60, dac, 2);
-
-		/* We now should verify here that the writing of the EEPROM went OK. */
-
-		/* Reread the first area. */
-		fee_read(ioaddr, 0x00, area_verify, 16);
-
-		/* Reread the DAC. */
-		fee_read(ioaddr, 0x60, dac_verify, 2);
-
-		/* Compare. */
-		if (memcmp(area, area_verify, 16 * 2) ||
-		    memcmp(dac, dac_verify, 2 * 2)) {
-#ifdef DEBUG_IOCTL_ERROR
-			printk(KERN_INFO
-			       "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n");
-#endif
-			return -EOPNOTSUPP;
-		}
-
-		/* We must download the frequency parameters to the
-		 * synthesizers (from the EEPROM - area 1)
-		 * Note: as the EEPROM is automatically decremented, we set the end
-		 * if the area... */
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x0F);
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
-			MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-		/* Wait until the download is finished. */
-		fee_wait(ioaddr, 100, 100);
-
-		/* We must now download the power adjust value (gain) to
-		 * the synthesizers (from the EEPROM - area 7 - DAC). */
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x61);
-		mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
-			MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-		/* Wait for the download to finish. */
-		fee_wait(ioaddr, 100, 100);
-
-#ifdef DEBUG_IOCTL_INFO
-		/* Verification of what we have done */
-
-		printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
-		for (i = 0; i < 16; i++) {
-			printk(" %04X", area_verify[i]);
-		}
-		printk("\n");
-
-		printk(KERN_DEBUG "WaveLAN EEPROM DAC:  %04X %04X\n",
-		       dac_verify[0], dac_verify[1]);
-#endif
-
-		return 0;
-	} else
-		return -EINVAL;	/* Bah, never get there... */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Give the list of available frequencies.
- */
-static int wv_frequency_list(unsigned long ioaddr,	/* I/O port of the card */
-				    iw_freq * list,	/* List of frequencies to fill */
-				    int max)
-{				/* Maximum number of frequencies */
-	u16 table[10];	/* Authorized frequency table */
-	long freq = 0L;		/* offset to 2.4 GHz in .5 MHz + 12 MHz */
-	int i;			/* index in the table */
-	int c = 0;		/* Channel number */
-
-	/* Read the frequency table. */
-	fee_read(ioaddr, 0x71 /* frequency table */ , table, 10);
-
-	/* Check all frequencies. */
-	i = 0;
-	for (freq = 0; freq < 150; freq++)
-		/* Look in the table if the frequency is allowed */
-		if (table[9 - (freq / 16)] & (1 << (freq % 16))) {
-			/* Compute approximate channel number */
-			while ((c < ARRAY_SIZE(channel_bands)) &&
-				(((channel_bands[c] >> 1) - 24) < freq)) 
-				c++;
-			list[i].i = c;	/* Set the list index */
-
-			/* put in the list */
-			list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
-			list[i++].e = 1;
-
-			/* Check number. */
-			if (i >= max)
-				return (i);
-		}
-
-	return (i);
-}
-
-#ifdef IW_WIRELESS_SPY
-/*------------------------------------------------------------------*/
-/*
- * Gather wireless spy statistics:  for each packet, compare the source
- * address with our list, and if they match, get the statistics.
- * Sorry, but this function really needs the wireless extensions.
- */
-static inline void wl_spy_gather(struct net_device * dev,
-				 u8 *	mac,	/* MAC address */
-				 u8 *	stats)	/* Statistics to gather */
-{
-	struct iw_quality wstats;
-
-	wstats.qual = stats[2] & MMR_SGNL_QUAL;
-	wstats.level = stats[0] & MMR_SIGNAL_LVL;
-	wstats.noise = stats[1] & MMR_SILENCE_LVL;
-	wstats.updated = 0x7;
-
-	/* Update spy records */
-	wireless_spy_update(dev, mac, &wstats);
-}
-#endif /* IW_WIRELESS_SPY */
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * This function calculates a histogram of the signal level.
- * As the noise is quite constant, it's like doing it on the SNR.
- * We have defined a set of interval (lp->his_range), and each time
- * the level goes in that interval, we increment the count (lp->his_sum).
- * With this histogram you may detect if one WaveLAN is really weak,
- * or you may also calculate the mean and standard deviation of the level.
- */
-static inline void wl_his_gather(struct net_device * dev, u8 * stats)
-{				/* Statistics to gather */
-	net_local *lp = netdev_priv(dev);
-	u8 level = stats[0] & MMR_SIGNAL_LVL;
-	int i;
-
-	/* Find the correct interval. */
-	i = 0;
-	while ((i < (lp->his_number - 1))
-	       && (level >= lp->his_range[i++]));
-
-	/* Increment interval counter. */
-	(lp->his_sum[i])++;
-}
-#endif /* HISTOGRAM */
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get protocol name
- */
-static int wavelan_get_name(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	strcpy(wrqu->name, "WaveLAN");
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set NWID
- */
-static int wavelan_set_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	mm_t m;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set NWID in WaveLAN. */
-	if (!wrqu->nwid.disabled) {
-		/* Set NWID in psa */
-		psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
-		psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
-		psa.psa_nwid_select = 0x01;
-		psa_write(ioaddr, lp->hacr,
-			  (char *) psa.psa_nwid - (char *) &psa,
-			  (unsigned char *) psa.psa_nwid, 3);
-
-		/* Set NWID in mmc. */
-		m.w.mmw_netw_id_l = psa.psa_nwid[1];
-		m.w.mmw_netw_id_h = psa.psa_nwid[0];
-		mmc_write(ioaddr,
-			  (char *) &m.w.mmw_netw_id_l -
-			  (char *) &m,
-			  (unsigned char *) &m.w.mmw_netw_id_l, 2);
-		mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), 0x00);
-	} else {
-		/* Disable NWID in the psa. */
-		psa.psa_nwid_select = 0x00;
-		psa_write(ioaddr, lp->hacr,
-			  (char *) &psa.psa_nwid_select -
-			  (char *) &psa,
-			  (unsigned char *) &psa.psa_nwid_select,
-			  1);
-
-		/* Disable NWID in the mmc (no filtering). */
-		mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel),
-			MMW_LOOPT_SEL_DIS_NWID);
-	}
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev, ioaddr, lp->hacr);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get NWID 
- */
-static int wavelan_get_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the NWID. */
-	psa_read(ioaddr, lp->hacr,
-		 (char *) psa.psa_nwid - (char *) &psa,
-		 (unsigned char *) psa.psa_nwid, 3);
-	wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
-	wrqu->nwid.disabled = !(psa.psa_nwid_select);
-	wrqu->nwid.fixed = 1;	/* Superfluous */
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set frequency
- */
-static int wavelan_set_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	unsigned long flags;
-	int ret;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-		ret = wv_set_frequency(ioaddr, &(wrqu->freq));
-	else
-		ret = -EOPNOTSUPP;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get frequency
- */
-static int wavelan_get_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
-	 * Does it work for everybody, especially old cards? */
-	if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		unsigned short freq;
-
-		/* Ask the EEPROM to read the frequency from the first area. */
-		fee_read(ioaddr, 0x00, &freq, 1);
-		wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
-		wrqu->freq.e = 1;
-	} else {
-		psa_read(ioaddr, lp->hacr,
-			 (char *) &psa.psa_subband - (char *) &psa,
-			 (unsigned char *) &psa.psa_subband, 1);
-
-		if (psa.psa_subband <= 4) {
-			wrqu->freq.m = fixed_bands[psa.psa_subband];
-			wrqu->freq.e = (psa.psa_subband != 0);
-		} else
-			ret = -EOPNOTSUPP;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set level threshold
- */
-static int wavelan_set_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set the level threshold. */
-	/* We should complain loudly if wrqu->sens.fixed = 0, because we
-	 * can't set auto mode... */
-	psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
-	psa_write(ioaddr, lp->hacr,
-		  (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		  (unsigned char *) &psa.psa_thr_pre_set, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev, ioaddr, lp->hacr);
-	mmc_out(ioaddr, mmwoff(0, mmw_thr_pre_set),
-		psa.psa_thr_pre_set);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get level threshold
- */
-static int wavelan_get_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the level threshold. */
-	psa_read(ioaddr, lp->hacr,
-		 (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		 (unsigned char *) &psa.psa_thr_pre_set, 1);
-	wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
-	wrqu->sens.fixed = 1;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set encryption key
- */
-static int wavelan_set_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	unsigned long flags;
-	psa_t psa;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check if capable of encryption */
-	if (!mmc_encr(ioaddr)) {
-		ret = -EOPNOTSUPP;
-	}
-
-	/* Check the size of the key */
-	if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
-		ret = -EINVAL;
-	}
-
-	if(!ret) {
-		/* Basic checking... */
-		if (wrqu->encoding.length == 8) {
-			/* Copy the key in the driver */
-			memcpy(psa.psa_encryption_key, extra,
-			       wrqu->encoding.length);
-			psa.psa_encryption_select = 1;
-
-			psa_write(ioaddr, lp->hacr,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 8 + 1);
-
-			mmc_out(ioaddr, mmwoff(0, mmw_encr_enable),
-				MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
-			mmc_write(ioaddr, mmwoff(0, mmw_encr_key),
-				  (unsigned char *) &psa.
-				  psa_encryption_key, 8);
-		}
-
-		/* disable encryption */
-		if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
-			psa.psa_encryption_select = 0;
-			psa_write(ioaddr, lp->hacr,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 1);
-
-			mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), 0);
-		}
-		/* update the Wavelan checksum */
-		update_psa_checksum(dev, ioaddr, lp->hacr);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get encryption key
- */
-static int wavelan_get_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Check if encryption is available */
-	if (!mmc_encr(ioaddr)) {
-		ret = -EOPNOTSUPP;
-	} else {
-		/* Read the encryption key */
-		psa_read(ioaddr, lp->hacr,
-			 (char *) &psa.psa_encryption_select -
-			 (char *) &psa,
-			 (unsigned char *) &psa.
-			 psa_encryption_select, 1 + 8);
-
-		/* encryption is enabled ? */
-		if (psa.psa_encryption_select)
-			wrqu->encoding.flags = IW_ENCODE_ENABLED;
-		else
-			wrqu->encoding.flags = IW_ENCODE_DISABLED;
-		wrqu->encoding.flags |= mmc_encr(ioaddr);
-
-		/* Copy the key to the user buffer */
-		wrqu->encoding.length = 8;
-		memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get range info
- */
-static int wavelan_get_range(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	struct iw_range *range = (struct iw_range *) extra;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Set the length (very important for backward compatibility) */
-	wrqu->data.length = sizeof(struct iw_range);
-
-	/* Set all the info we don't care or don't know about to zero */
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* Set the Wireless Extension versions */
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 9;
-
-	/* Set information in the range struct.  */
-	range->throughput = 1.6 * 1000 * 1000;	/* don't argue on this ! */
-	range->min_nwid = 0x0000;
-	range->max_nwid = 0xFFFF;
-
-	range->sensitivity = 0x3F;
-	range->max_qual.qual = MMR_SGNL_QUAL;
-	range->max_qual.level = MMR_SIGNAL_LVL;
-	range->max_qual.noise = MMR_SILENCE_LVL;
-	range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
-	/* Need to get better values for those two */
-	range->avg_qual.level = 30;
-	range->avg_qual.noise = 8;
-
-	range->num_bitrates = 1;
-	range->bitrate[0] = 2000000;	/* 2 Mb/s */
-
-	/* Event capability (kernel + driver) */
-	range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
-				IW_EVENT_CAPA_MASK(0x8B04));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		range->num_channels = 10;
-		range->num_frequency = wv_frequency_list(ioaddr, range->freq,
-							IW_MAX_FREQUENCIES);
-	} else
-		range->num_channels = range->num_frequency = 0;
-
-	/* Encryption supported ? */
-	if (mmc_encr(ioaddr)) {
-		range->encoding_size[0] = 8;	/* DES = 64 bits key */
-		range->num_encoding_sizes = 1;
-		range->max_encoding_tokens = 1;	/* Only one key possible */
-	} else {
-		range->num_encoding_sizes = 0;
-		range->max_encoding_tokens = 0;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set quality threshold
- */
-static int wavelan_set_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa.psa_quality_thr = *(extra) & 0x0F;
-	psa_write(ioaddr, lp->hacr,
-		  (char *) &psa.psa_quality_thr - (char *) &psa,
-		  (unsigned char *) &psa.psa_quality_thr, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev, ioaddr, lp->hacr);
-	mmc_out(ioaddr, mmwoff(0, mmw_quality_thr),
-		psa.psa_quality_thr);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get quality threshold
- */
-static int wavelan_get_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa_read(ioaddr, lp->hacr,
-		 (char *) &psa.psa_quality_thr - (char *) &psa,
-		 (unsigned char *) &psa.psa_quality_thr, 1);
-	*(extra) = psa.psa_quality_thr & 0x0F;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set histogram
- */
-static int wavelan_set_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-
-	/* Check the number of intervals. */
-	if (wrqu->data.length > 16) {
-		return(-E2BIG);
-	}
-
-	/* Disable histo while we copy the addresses.
-	 * As we don't disable interrupts, we need to do this */
-	lp->his_number = 0;
-
-	/* Are there ranges to copy? */
-	if (wrqu->data.length > 0) {
-		/* Copy interval ranges to the driver */
-		memcpy(lp->his_range, extra, wrqu->data.length);
-
-		{
-		  int i;
-		  printk(KERN_DEBUG "Histo :");
-		  for(i = 0; i < wrqu->data.length; i++)
-		    printk(" %d", lp->his_range[i]);
-		  printk("\n");
-		}
-
-		/* Reset result structure. */
-		memset(lp->his_sum, 0x00, sizeof(long) * 16);
-	}
-
-	/* Now we can set the number of ranges */
-	lp->his_number = wrqu->data.length;
-
-	return(0);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get histogram
- */
-static int wavelan_get_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);	/* lp is not unused */
-
-	/* Set the number of intervals. */
-	wrqu->data.length = lp->his_number;
-
-	/* Give back the distribution statistics */
-	if(lp->his_number > 0)
-		memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
-
-	return(0);
-}
-#endif			/* HISTOGRAM */
-
-/*------------------------------------------------------------------*/
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const iw_handler		wavelan_handler[] =
-{
-	NULL,				/* SIOCSIWNAME */
-	wavelan_get_name,		/* SIOCGIWNAME */
-	wavelan_set_nwid,		/* SIOCSIWNWID */
-	wavelan_get_nwid,		/* SIOCGIWNWID */
-	wavelan_set_freq,		/* SIOCSIWFREQ */
-	wavelan_get_freq,		/* SIOCGIWFREQ */
-	NULL,				/* SIOCSIWMODE */
-	NULL,				/* SIOCGIWMODE */
-	wavelan_set_sens,		/* SIOCSIWSENS */
-	wavelan_get_sens,		/* SIOCGIWSENS */
-	NULL,				/* SIOCSIWRANGE */
-	wavelan_get_range,		/* SIOCGIWRANGE */
-	NULL,				/* SIOCSIWPRIV */
-	NULL,				/* SIOCGIWPRIV */
-	NULL,				/* SIOCSIWSTATS */
-	NULL,				/* SIOCGIWSTATS */
-	iw_handler_set_spy,		/* SIOCSIWSPY */
-	iw_handler_get_spy,		/* SIOCGIWSPY */
-	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
-	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
-	NULL,				/* SIOCSIWAP */
-	NULL,				/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWESSID */
-	NULL,				/* SIOCGIWESSID */
-	NULL,				/* SIOCSIWNICKN */
-	NULL,				/* SIOCGIWNICKN */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWRATE */
-	NULL,				/* SIOCGIWRATE */
-	NULL,				/* SIOCSIWRTS */
-	NULL,				/* SIOCGIWRTS */
-	NULL,				/* SIOCSIWFRAG */
-	NULL,				/* SIOCGIWFRAG */
-	NULL,				/* SIOCSIWTXPOW */
-	NULL,				/* SIOCGIWTXPOW */
-	NULL,				/* SIOCSIWRETRY */
-	NULL,				/* SIOCGIWRETRY */
-	/* Bummer ! Why those are only at the end ??? */
-	wavelan_set_encode,		/* SIOCSIWENCODE */
-	wavelan_get_encode,		/* SIOCGIWENCODE */
-};
-
-static const iw_handler		wavelan_private_handler[] =
-{
-	wavelan_set_qthr,		/* SIOCIWFIRSTPRIV */
-	wavelan_get_qthr,		/* SIOCIWFIRSTPRIV + 1 */
-#ifdef HISTOGRAM
-	wavelan_set_histo,		/* SIOCIWFIRSTPRIV + 2 */
-	wavelan_get_histo,		/* SIOCIWFIRSTPRIV + 3 */
-#endif	/* HISTOGRAM */
-};
-
-static const struct iw_priv_args wavelan_private_args[] = {
-/*{ cmd,         set_args,                            get_args, name } */
-  { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
-  { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
-  { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16,                    0, "sethisto" },
-  { SIOCGIPHISTO, 0,                     IW_PRIV_TYPE_INT | 16, "gethisto" },
-};
-
-static const struct iw_handler_def	wavelan_handler_def =
-{
-	.num_standard	= ARRAY_SIZE(wavelan_handler),
-	.num_private	= ARRAY_SIZE(wavelan_private_handler),
-	.num_private_args = ARRAY_SIZE(wavelan_private_args),
-	.standard	= wavelan_handler,
-	.private	= wavelan_private_handler,
-	.private_args	= wavelan_private_args,
-	.get_wireless_stats = wavelan_get_wireless_stats,
-};
-
-/*------------------------------------------------------------------*/
-/*
- * Get wireless statistics.
- * Called by /proc/net/wireless
- */
-static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	mmr_t m;
-	iw_stats *wstats;
-	unsigned long flags;
-
-#ifdef DEBUG_IOCTL_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n",
-	       dev->name);
-#endif
-
-	/* Check */
-	if (lp == (net_local *) NULL)
-		return (iw_stats *) NULL;
-	
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	wstats = &lp->wstats;
-
-	/* Get data from the mmc. */
-	mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
-
-	mmc_read(ioaddr, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
-	mmc_read(ioaddr, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l,
-		 2);
-	mmc_read(ioaddr, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set,
-		 4);
-
-	mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
-
-	/* Copy data to wireless stuff. */
-	wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
-	wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
-	wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
-	wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
-	wstats->qual.updated = (((m. mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) 
-			| ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) 
-			| ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
-	wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-	wstats->discard.code = 0L;
-	wstats->discard.misc = 0L;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_IOCTL_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n",
-	       dev->name);
-#endif
-	return &lp->wstats;
-}
-
-/************************* PACKET RECEPTION *************************/
-/*
- * This part deals with receiving the packets.
- * The interrupt handler gets an interrupt when a packet has been
- * successfully received and calls this part.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does the actual copying of data (including the Ethernet
- * header structure) from the WaveLAN card to an sk_buff chain that
- * will be passed up to the network interface layer. NOTE: we
- * currently don't handle trailer protocols (neither does the rest of
- * the network interface), so if that is needed, it will (at least in
- * part) be added here.  The contents of the receive ring buffer are
- * copied to a message chain that is then passed to the kernel.
- *
- * Note: if any errors occur, the packet is "dropped on the floor".
- * (called by wv_packet_rcv())
- */
-static void
-wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	struct sk_buff *skb;
-
-#ifdef DEBUG_RX_TRACE
-	printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
-	       dev->name, buf_off, sksize);
-#endif
-
-	/* Allocate buffer for the data */
-	if ((skb = dev_alloc_skb(sksize)) == (struct sk_buff *) NULL) {
-#ifdef DEBUG_RX_ERROR
-		printk(KERN_INFO
-		       "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n",
-		       dev->name, sksize);
-#endif
-		dev->stats.rx_dropped++;
-		return;
-	}
-
-	/* Copy the packet to the buffer. */
-	obram_read(ioaddr, buf_off, skb_put(skb, sksize), sksize);
-	skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef DEBUG_RX_INFO
-	wv_packet_info(skb_mac_header(skb), sksize, dev->name,
-		       "wv_packet_read");
-#endif				/* DEBUG_RX_INFO */
-
-	/* Statistics-gathering and associated stuff.
-	 * It seem a bit messy with all the define, but it's really
-	 * simple... */
-	if (
-#ifdef IW_WIRELESS_SPY		/* defined in iw_handler.h */
-		   (lp->spy_data.spy_number > 0) ||
-#endif /* IW_WIRELESS_SPY */
-#ifdef HISTOGRAM
-		   (lp->his_number > 0) ||
-#endif /* HISTOGRAM */
-		   0) {
-		u8 stats[3];	/* signal level, noise level, signal quality */
-
-		/* Read signal level, silence level and signal quality bytes */
-		/* Note: in the PCMCIA hardware, these are part of the frame.
-		 * It seems that for the ISA hardware, it's nowhere to be
-		 * found in the frame, so I'm obliged to do this (it has a
-		 * side effect on /proc/net/wireless).
-		 * Any ideas?
-		 */
-		mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
-		mmc_read(ioaddr, mmroff(0, mmr_signal_lvl), stats, 3);
-		mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
-
-#ifdef DEBUG_RX_INFO
-		printk(KERN_DEBUG
-		       "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
-		       dev->name, stats[0] & 0x3F, stats[1] & 0x3F,
-		       stats[2] & 0x0F);
-#endif
-
-		/* Spying stuff */
-#ifdef IW_WIRELESS_SPY
-		wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE,
-			      stats);
-#endif /* IW_WIRELESS_SPY */
-#ifdef HISTOGRAM
-		wl_his_gather(dev, stats);
-#endif /* HISTOGRAM */
-	}
-
-	/*
-	 * Hand the packet to the network module.
-	 */
-	netif_rx(skb);
-
-	/* Keep statistics up to date */
-	dev->stats.rx_packets++;
-	dev->stats.rx_bytes += sksize;
-
-#ifdef DEBUG_RX_TRACE
-	printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Transfer as many packets as we can
- * from the device RAM.
- * (called in wavelan_interrupt()).
- * Note : the spinlock is already grabbed for us.
- */
-static void wv_receive(struct net_device * dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	fd_t fd;
-	rbd_t rbd;
-	int nreaped = 0;
-
-#ifdef DEBUG_RX_TRACE
-	printk(KERN_DEBUG "%s: ->wv_receive()\n", dev->name);
-#endif
-
-	/* Loop on each received packet. */
-	for (;;) {
-		obram_read(ioaddr, lp->rx_head, (unsigned char *) &fd,
-			   sizeof(fd));
-
-		/* Note about the status :
-		 * It start up to be 0 (the value we set). Then, when the RU
-		 * grab the buffer to prepare for reception, it sets the
-		 * FD_STATUS_B flag. When the RU has finished receiving the
-		 * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate
-		 * completion and set the other flags to indicate the eventual
-		 * errors. FD_STATUS_OK indicates that the reception was OK.
-		 */
-
-		/* If the current frame is not complete, we have reached the end. */
-		if ((fd.fd_status & FD_STATUS_C) != FD_STATUS_C)
-			break;	/* This is how we exit the loop. */
-
-		nreaped++;
-
-		/* Check whether frame was correctly received. */
-		if ((fd.fd_status & FD_STATUS_OK) == FD_STATUS_OK) {
-			/* Does the frame contain a pointer to the data?  Let's check. */
-			if (fd.fd_rbd_offset != I82586NULL) {
-				/* Read the receive buffer descriptor */
-				obram_read(ioaddr, fd.fd_rbd_offset,
-					   (unsigned char *) &rbd,
-					   sizeof(rbd));
-
-#ifdef DEBUG_RX_ERROR
-				if ((rbd.rbd_status & RBD_STATUS_EOF) !=
-				    RBD_STATUS_EOF) printk(KERN_INFO
-							   "%s: wv_receive(): missing EOF flag.\n",
-							   dev->name);
-
-				if ((rbd.rbd_status & RBD_STATUS_F) !=
-				    RBD_STATUS_F) printk(KERN_INFO
-							 "%s: wv_receive(): missing F flag.\n",
-							 dev->name);
-#endif				/* DEBUG_RX_ERROR */
-
-				/* Read the packet and transmit to Linux */
-				wv_packet_read(dev, rbd.rbd_bufl,
-					       rbd.
-					       rbd_status &
-					       RBD_STATUS_ACNT);
-			}
-#ifdef DEBUG_RX_ERROR
-			else	/* if frame has no data */
-				printk(KERN_INFO
-				       "%s: wv_receive(): frame has no data.\n",
-				       dev->name);
-#endif
-		} else {	/* If reception was no successful */
-
-			dev->stats.rx_errors++;
-
-#ifdef DEBUG_RX_INFO
-			printk(KERN_DEBUG
-			       "%s: wv_receive(): frame not received successfully (%X).\n",
-			       dev->name, fd.fd_status);
-#endif
-
-#ifdef DEBUG_RX_ERROR
-			if ((fd.fd_status & FD_STATUS_S6) != 0)
-				printk(KERN_INFO
-				       "%s: wv_receive(): no EOF flag.\n",
-				       dev->name);
-#endif
-
-			if ((fd.fd_status & FD_STATUS_S7) != 0) {
-				dev->stats.rx_length_errors++;
-#ifdef DEBUG_RX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_receive(): frame too short.\n",
-				       dev->name);
-#endif
-			}
-
-			if ((fd.fd_status & FD_STATUS_S8) != 0) {
-				dev->stats.rx_over_errors++;
-#ifdef DEBUG_RX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_receive(): rx DMA overrun.\n",
-				       dev->name);
-#endif
-			}
-
-			if ((fd.fd_status & FD_STATUS_S9) != 0) {
-				dev->stats.rx_fifo_errors++;
-#ifdef DEBUG_RX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_receive(): ran out of resources.\n",
-				       dev->name);
-#endif
-			}
-
-			if ((fd.fd_status & FD_STATUS_S10) != 0) {
-				dev->stats.rx_frame_errors++;
-#ifdef DEBUG_RX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_receive(): alignment error.\n",
-				       dev->name);
-#endif
-			}
-
-			if ((fd.fd_status & FD_STATUS_S11) != 0) {
-				dev->stats.rx_crc_errors++;
-#ifdef DEBUG_RX_FAIL
-				printk(KERN_DEBUG
-				       "%s: wv_receive(): CRC error.\n",
-				       dev->name);
-#endif
-			}
-		}
-
-		fd.fd_status = 0;
-		obram_write(ioaddr, fdoff(lp->rx_head, fd_status),
-			    (unsigned char *) &fd.fd_status,
-			    sizeof(fd.fd_status));
-
-		fd.fd_command = FD_COMMAND_EL;
-		obram_write(ioaddr, fdoff(lp->rx_head, fd_command),
-			    (unsigned char *) &fd.fd_command,
-			    sizeof(fd.fd_command));
-
-		fd.fd_command = 0;
-		obram_write(ioaddr, fdoff(lp->rx_last, fd_command),
-			    (unsigned char *) &fd.fd_command,
-			    sizeof(fd.fd_command));
-
-		lp->rx_last = lp->rx_head;
-		lp->rx_head = fd.fd_link_offset;
-	}			/* for(;;) -> loop on all frames */
-
-#ifdef DEBUG_RX_INFO
-	if (nreaped > 1)
-		printk(KERN_DEBUG "%s: wv_receive(): reaped %d\n",
-		       dev->name, nreaped);
-#endif
-#ifdef DEBUG_RX_TRACE
-	printk(KERN_DEBUG "%s: <-wv_receive()\n", dev->name);
-#endif
-}
-
-/*********************** PACKET TRANSMISSION ***********************/
-/*
- * This part deals with sending packets through the WaveLAN.
- *
- */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine fills in the appropriate registers and memory
- * locations on the WaveLAN card and starts the card off on
- * the transmit.
- *
- * The principle:
- * Each block contains a transmit command, a NOP command,
- * a transmit block descriptor and a buffer.
- * The CU read the transmit block which point to the tbd,
- * read the tbd and the content of the buffer.
- * When it has finish with it, it goes to the next command
- * which in our case is the NOP. The NOP points on itself,
- * so the CU stop here.
- * When we add the next block, we modify the previous nop
- * to make it point on the new tx command.
- * Simple, isn't it ?
- *
- * (called in wavelan_packet_xmit())
- */
-static int wv_packet_write(struct net_device * dev, void *buf, short length)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	unsigned short txblock;
-	unsigned short txpred;
-	unsigned short tx_addr;
-	unsigned short nop_addr;
-	unsigned short tbd_addr;
-	unsigned short buf_addr;
-	ac_tx_t tx;
-	ac_nop_t nop;
-	tbd_t tbd;
-	int clen = length;
-	unsigned long flags;
-
-#ifdef DEBUG_TX_TRACE
-	printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name,
-	       length);
-#endif
-
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check nothing bad has happened */
-	if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
-#ifdef DEBUG_TX_ERROR
-		printk(KERN_INFO "%s: wv_packet_write(): Tx queue full.\n",
-		       dev->name);
-#endif
-		spin_unlock_irqrestore(&lp->spinlock, flags);
-		return 1;
-	}
-
-	/* Calculate addresses of next block and previous block. */
-	txblock = lp->tx_first_free;
-	txpred = txblock - TXBLOCKZ;
-	if (txpred < OFFSET_CU)
-		txpred += NTXBLOCKS * TXBLOCKZ;
-	lp->tx_first_free += TXBLOCKZ;
-	if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
-		lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
-
-	lp->tx_n_in_use++;
-
-	/* Calculate addresses of the different parts of the block. */
-	tx_addr = txblock;
-	nop_addr = tx_addr + sizeof(tx);
-	tbd_addr = nop_addr + sizeof(nop);
-	buf_addr = tbd_addr + sizeof(tbd);
-
-	/*
-	 * Transmit command
-	 */
-	tx.tx_h.ac_status = 0;
-	obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
-		    (unsigned char *) &tx.tx_h.ac_status,
-		    sizeof(tx.tx_h.ac_status));
-
-	/*
-	 * NOP command
-	 */
-	nop.nop_h.ac_status = 0;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
-		    (unsigned char *) &nop.nop_h.ac_status,
-		    sizeof(nop.nop_h.ac_status));
-	nop.nop_h.ac_link = nop_addr;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
-		    (unsigned char *) &nop.nop_h.ac_link,
-		    sizeof(nop.nop_h.ac_link));
-
-	/*
-	 * Transmit buffer descriptor
-	 */
-	tbd.tbd_status = TBD_STATUS_EOF | (TBD_STATUS_ACNT & clen);
-	tbd.tbd_next_bd_offset = I82586NULL;
-	tbd.tbd_bufl = buf_addr;
-	tbd.tbd_bufh = 0;
-	obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, sizeof(tbd));
-
-	/*
-	 * Data
-	 */
-	obram_write(ioaddr, buf_addr, buf, length);
-
-	/*
-	 * Overwrite the predecessor NOP link
-	 * so that it points to this txblock.
-	 */
-	nop_addr = txpred + sizeof(tx);
-	nop.nop_h.ac_status = 0;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
-		    (unsigned char *) &nop.nop_h.ac_status,
-		    sizeof(nop.nop_h.ac_status));
-	nop.nop_h.ac_link = txblock;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
-		    (unsigned char *) &nop.nop_h.ac_link,
-		    sizeof(nop.nop_h.ac_link));
-
-	/* Make sure the watchdog will keep quiet for a while */
-	dev->trans_start = jiffies;
-
-	/* Keep stats up to date. */
-	dev->stats.tx_bytes += length;
-
-	if (lp->tx_first_in_use == I82586NULL)
-		lp->tx_first_in_use = txblock;
-
-	if (lp->tx_n_in_use < NTXBLOCKS - 1)
-		netif_wake_queue(dev);
-
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-	
-#ifdef DEBUG_TX_INFO
-	wv_packet_info((u8 *) buf, length, dev->name,
-		       "wv_packet_write");
-#endif				/* DEBUG_TX_INFO */
-
-#ifdef DEBUG_TX_TRACE
-	printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
-#endif
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine is called when we want to send a packet (NET3 callback)
- * In this routine, we check if the harware is ready to accept
- * the packet.  We also prevent reentrance.  Then we call the function
- * to send the packet.
- */
-static netdev_tx_t wavelan_packet_xmit(struct sk_buff *skb,
-					     struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	char data[ETH_ZLEN];
-
-#ifdef DEBUG_TX_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
-	       (unsigned) skb);
-#endif
-
-	/*
-	 * Block a timer-based transmit from overlapping.
-	 * In other words, prevent reentering this routine.
-	 */
-	netif_stop_queue(dev);
-
-	/* If somebody has asked to reconfigure the controller, 
-	 * we can do it now.
-	 */
-	if (lp->reconfig_82586) {
-		spin_lock_irqsave(&lp->spinlock, flags);
-		wv_82586_config(dev);
-		spin_unlock_irqrestore(&lp->spinlock, flags);
-		/* Check that we can continue */
-		if (lp->tx_n_in_use == (NTXBLOCKS - 1))
-			return NETDEV_TX_BUSY;
-	}
-
-	/* Do we need some padding? */
-	/* Note : on wireless the propagation time is in the order of 1us,
-	 * and we don't have the Ethernet specific requirement of beeing
-	 * able to detect collisions, therefore in theory we don't really
-	 * need to pad. Jean II */
-	if (skb->len < ETH_ZLEN) {
-		memset(data, 0, ETH_ZLEN);
-		skb_copy_from_linear_data(skb, data, skb->len);
-		/* Write packet on the card */
-		if(wv_packet_write(dev, data, ETH_ZLEN))
-			return NETDEV_TX_BUSY;	/* We failed */
-	}
-	else if(wv_packet_write(dev, skb->data, skb->len))
-		return NETDEV_TX_BUSY;	/* We failed */
-
-
-	dev_kfree_skb(skb);
-
-#ifdef DEBUG_TX_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
-#endif
-	return NETDEV_TX_OK;
-}
-
-/*********************** HARDWARE CONFIGURATION ***********************/
-/*
- * This part does the real job of starting and configuring the hardware.
- */
-
-/*--------------------------------------------------------------------*/
-/*
- * Routine to initialize the Modem Management Controller.
- * (called by wv_hw_reset())
- */
-static int wv_mmc_init(struct net_device * dev)
-{
-	unsigned long ioaddr = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	mmw_t m;
-	int configured;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
-#endif
-
-	/* Read the parameter storage area. */
-	psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
-
-#ifdef USE_PSA_CONFIG
-	configured = psa.psa_conf_status & 1;
-#else
-	configured = 0;
-#endif
-
-	/* Is the PSA is not configured */
-	if (!configured) {
-		/* User will be able to configure NWID later (with iwconfig). */
-		psa.psa_nwid[0] = 0;
-		psa.psa_nwid[1] = 0;
-
-		/* no NWID checking since NWID is not set */
-		psa.psa_nwid_select = 0;
-
-		/* Disable encryption */
-		psa.psa_encryption_select = 0;
-
-		/* Set to standard values:
-		 * 0x04 for AT,
-		 * 0x01 for MCA,
-		 * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
-		 */
-		if (psa.psa_comp_number & 1)
-			psa.psa_thr_pre_set = 0x01;
-		else
-			psa.psa_thr_pre_set = 0x04;
-		psa.psa_quality_thr = 0x03;
-
-		/* It is configured */
-		psa.psa_conf_status |= 1;
-
-#ifdef USE_PSA_CONFIG
-		/* Write the psa. */
-		psa_write(ioaddr, lp->hacr,
-			  (char *) psa.psa_nwid - (char *) &psa,
-			  (unsigned char *) psa.psa_nwid, 4);
-		psa_write(ioaddr, lp->hacr,
-			  (char *) &psa.psa_thr_pre_set - (char *) &psa,
-			  (unsigned char *) &psa.psa_thr_pre_set, 1);
-		psa_write(ioaddr, lp->hacr,
-			  (char *) &psa.psa_quality_thr - (char *) &psa,
-			  (unsigned char *) &psa.psa_quality_thr, 1);
-		psa_write(ioaddr, lp->hacr,
-			  (char *) &psa.psa_conf_status - (char *) &psa,
-			  (unsigned char *) &psa.psa_conf_status, 1);
-		/* update the Wavelan checksum */
-		update_psa_checksum(dev, ioaddr, lp->hacr);
-#endif
-	}
-
-	/* Zero the mmc structure. */
-	memset(&m, 0x00, sizeof(m));
-
-	/* Copy PSA info to the mmc. */
-	m.mmw_netw_id_l = psa.psa_nwid[1];
-	m.mmw_netw_id_h = psa.psa_nwid[0];
-
-	if (psa.psa_nwid_select & 1)
-		m.mmw_loopt_sel = 0x00;
-	else
-		m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
-
-	memcpy(&m.mmw_encr_key, &psa.psa_encryption_key,
-	       sizeof(m.mmw_encr_key));
-
-	if (psa.psa_encryption_select)
-		m.mmw_encr_enable =
-		    MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
-	else
-		m.mmw_encr_enable = 0;
-
-	m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
-	m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
-
-	/*
-	 * Set default modem control parameters.
-	 * See NCR document 407-0024326 Rev. A.
-	 */
-	m.mmw_jabber_enable = 0x01;
-	m.mmw_freeze = 0;
-	m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
-	m.mmw_ifs = 0x20;
-	m.mmw_mod_delay = 0x04;
-	m.mmw_jam_time = 0x38;
-
-	m.mmw_des_io_invert = 0;
-	m.mmw_decay_prm = 0;
-	m.mmw_decay_updat_prm = 0;
-
-	/* Write all info to MMC. */
-	mmc_write(ioaddr, 0, (u8 *) & m, sizeof(m));
-
-	/* The following code starts the modem of the 2.00 frequency
-	 * selectable cards at power on.  It's not strictly needed for the
-	 * following boots.
-	 * The original patch was by Joe Finney for the PCMCIA driver, but
-	 * I've cleaned it up a bit and added documentation.
-	 * Thanks to Loeke Brederveld from Lucent for the info.
-	 */
-
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
-	 * Does it work for everybody, especially old cards? */
-	/* Note: WFREQSEL verifies that it is able to read a sensible
-	 * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID
-	 * is 0xA (Xilinx version) or 0xB (Ariadne version).
-	 * My test is more crude but does work. */
-	if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		/* We must download the frequency parameters to the
-		 * synthesizers (from the EEPROM - area 1)
-		 * Note: as the EEPROM is automatically decremented, we set the end
-		 * if the area... */
-		m.mmw_fee_addr = 0x0F;
-		m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-		mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
-			  (unsigned char *) &m.mmw_fee_ctrl, 2);
-
-		/* Wait until the download is finished. */
-		fee_wait(ioaddr, 100, 100);
-
-#ifdef DEBUG_CONFIG_INFO
-		/* The frequency was in the last word downloaded. */
-		mmc_read(ioaddr, (char *) &m.mmw_fee_data_l - (char *) &m,
-			 (unsigned char *) &m.mmw_fee_data_l, 2);
-
-		/* Print some info for the user. */
-		printk(KERN_DEBUG
-		       "%s: WaveLAN 2.00 recognised (frequency select).  Current frequency = %ld\n",
-		       dev->name,
-		       ((m.
-			 mmw_fee_data_h << 4) | (m.mmw_fee_data_l >> 4)) *
-		       5 / 2 + 24000L);
-#endif
-
-		/* We must now download the power adjust value (gain) to
-		 * the synthesizers (from the EEPROM - area 7 - DAC). */
-		m.mmw_fee_addr = 0x61;
-		m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-		mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
-			  (unsigned char *) &m.mmw_fee_ctrl, 2);
-
-		/* Wait until the download is finished. */
-	}
-	/* if 2.00 card */
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Construct the fd and rbd structures.
- * Start the receive unit.
- * (called by wv_hw_reset())
- */
-static int wv_ru_start(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	u16 scb_cs;
-	fd_t fd;
-	rbd_t rbd;
-	u16 rx;
-	u16 rx_next;
-	int i;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
-#endif
-
-	obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
-		   (unsigned char *) &scb_cs, sizeof(scb_cs));
-	if ((scb_cs & SCB_ST_RUS) == SCB_ST_RUS_RDY)
-		return 0;
-
-	lp->rx_head = OFFSET_RU;
-
-	for (i = 0, rx = lp->rx_head; i < NRXBLOCKS; i++, rx = rx_next) {
-		rx_next =
-		    (i == NRXBLOCKS - 1) ? lp->rx_head : rx + RXBLOCKZ;
-
-		fd.fd_status = 0;
-		fd.fd_command = (i == NRXBLOCKS - 1) ? FD_COMMAND_EL : 0;
-		fd.fd_link_offset = rx_next;
-		fd.fd_rbd_offset = rx + sizeof(fd);
-		obram_write(ioaddr, rx, (unsigned char *) &fd, sizeof(fd));
-
-		rbd.rbd_status = 0;
-		rbd.rbd_next_rbd_offset = I82586NULL;
-		rbd.rbd_bufl = rx + sizeof(fd) + sizeof(rbd);
-		rbd.rbd_bufh = 0;
-		rbd.rbd_el_size = RBD_EL | (RBD_SIZE & MAXDATAZ);
-		obram_write(ioaddr, rx + sizeof(fd),
-			    (unsigned char *) &rbd, sizeof(rbd));
-
-		lp->rx_last = rx;
-	}
-
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_rfa_offset),
-		    (unsigned char *) &lp->rx_head, sizeof(lp->rx_head));
-
-	scb_cs = SCB_CMD_RUC_GO;
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &scb_cs, sizeof(scb_cs));
-
-	set_chan_attn(ioaddr, lp->hacr);
-
-	for (i = 1000; i > 0; i--) {
-		obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
-			   (unsigned char *) &scb_cs, sizeof(scb_cs));
-		if (scb_cs == 0)
-			break;
-
-		udelay(10);
-	}
-
-	if (i <= 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_ru_start(): board not accepting command.\n",
-		       dev->name);
-#endif
-		return -1;
-	}
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Initialise the transmit blocks.
- * Start the command unit executing the NOP
- * self-loop of the first transmit block.
- *
- * Here we create the list of send buffers used to transmit packets
- * between the PC and the command unit. For each buffer, we create a
- * buffer descriptor (pointing on the buffer), a transmit command
- * (pointing to the buffer descriptor) and a NOP command.
- * The transmit command is linked to the NOP, and the NOP to itself.
- * When we will have finished executing the transmit command, we will
- * then loop on the NOP. By releasing the NOP link to a new command,
- * we may send another buffer.
- *
- * (called by wv_hw_reset())
- */
-static int wv_cu_start(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	int i;
-	u16 txblock;
-	u16 first_nop;
-	u16 scb_cs;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_cu_start()\n", dev->name);
-#endif
-
-	lp->tx_first_free = OFFSET_CU;
-	lp->tx_first_in_use = I82586NULL;
-
-	for (i = 0, txblock = OFFSET_CU;
-	     i < NTXBLOCKS; i++, txblock += TXBLOCKZ) {
-		ac_tx_t tx;
-		ac_nop_t nop;
-		tbd_t tbd;
-		unsigned short tx_addr;
-		unsigned short nop_addr;
-		unsigned short tbd_addr;
-		unsigned short buf_addr;
-
-		tx_addr = txblock;
-		nop_addr = tx_addr + sizeof(tx);
-		tbd_addr = nop_addr + sizeof(nop);
-		buf_addr = tbd_addr + sizeof(tbd);
-
-		tx.tx_h.ac_status = 0;
-		tx.tx_h.ac_command = acmd_transmit | AC_CFLD_I;
-		tx.tx_h.ac_link = nop_addr;
-		tx.tx_tbd_offset = tbd_addr;
-		obram_write(ioaddr, tx_addr, (unsigned char *) &tx,
-			    sizeof(tx));
-
-		nop.nop_h.ac_status = 0;
-		nop.nop_h.ac_command = acmd_nop;
-		nop.nop_h.ac_link = nop_addr;
-		obram_write(ioaddr, nop_addr, (unsigned char *) &nop,
-			    sizeof(nop));
-
-		tbd.tbd_status = TBD_STATUS_EOF;
-		tbd.tbd_next_bd_offset = I82586NULL;
-		tbd.tbd_bufl = buf_addr;
-		tbd.tbd_bufh = 0;
-		obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd,
-			    sizeof(tbd));
-	}
-
-	first_nop =
-	    OFFSET_CU + (NTXBLOCKS - 1) * TXBLOCKZ + sizeof(ac_tx_t);
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_cbl_offset),
-		    (unsigned char *) &first_nop, sizeof(first_nop));
-
-	scb_cs = SCB_CMD_CUC_GO;
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &scb_cs, sizeof(scb_cs));
-
-	set_chan_attn(ioaddr, lp->hacr);
-
-	for (i = 1000; i > 0; i--) {
-		obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
-			   (unsigned char *) &scb_cs, sizeof(scb_cs));
-		if (scb_cs == 0)
-			break;
-
-		udelay(10);
-	}
-
-	if (i <= 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_cu_start(): board not accepting command.\n",
-		       dev->name);
-#endif
-		return -1;
-	}
-
-	lp->tx_n_in_use = 0;
-	netif_start_queue(dev);
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_cu_start()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a standard configuration of the WaveLAN 
- * controller (i82586).
- *
- * It initialises the scp, iscp and scb structure
- * The first two are just pointers to the next.
- * The last one is used for basic configuration and for basic
- * communication (interrupt status).
- *
- * (called by wv_hw_reset())
- */
-static int wv_82586_start(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	scp_t scp;		/* system configuration pointer */
-	iscp_t iscp;		/* intermediate scp */
-	scb_t scb;		/* system control block */
-	ach_t cb;		/* Action command header */
-	u8 zeroes[512];
-	int i;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_82586_start()\n", dev->name);
-#endif
-
-	/*
-	 * Clear the onboard RAM.
-	 */
-	memset(&zeroes[0], 0x00, sizeof(zeroes));
-	for (i = 0; i < I82586_MEMZ; i += sizeof(zeroes))
-		obram_write(ioaddr, i, &zeroes[0], sizeof(zeroes));
-
-	/*
-	 * Construct the command unit structures:
-	 * scp, iscp, scb, cb.
-	 */
-	memset(&scp, 0x00, sizeof(scp));
-	scp.scp_sysbus = SCP_SY_16BBUS;
-	scp.scp_iscpl = OFFSET_ISCP;
-	obram_write(ioaddr, OFFSET_SCP, (unsigned char *) &scp,
-		    sizeof(scp));
-
-	memset(&iscp, 0x00, sizeof(iscp));
-	iscp.iscp_busy = 1;
-	iscp.iscp_offset = OFFSET_SCB;
-	obram_write(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
-		    sizeof(iscp));
-
-	/* Our first command is to reset the i82586. */
-	memset(&scb, 0x00, sizeof(scb));
-	scb.scb_command = SCB_CMD_RESET;
-	scb.scb_cbl_offset = OFFSET_CU;
-	scb.scb_rfa_offset = OFFSET_RU;
-	obram_write(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
-		    sizeof(scb));
-
-	set_chan_attn(ioaddr, lp->hacr);
-
-	/* Wait for command to finish. */
-	for (i = 1000; i > 0; i--) {
-		obram_read(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
-			   sizeof(iscp));
-
-		if (iscp.iscp_busy == (unsigned short) 0)
-			break;
-
-		udelay(10);
-	}
-
-	if (i <= 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wv_82586_start(): iscp_busy timeout.\n",
-		       dev->name);
-#endif
-		return -1;
-	}
-
-	/* Check command completion. */
-	for (i = 15; i > 0; i--) {
-		obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
-			   sizeof(scb));
-
-		if (scb.scb_status == (SCB_ST_CX | SCB_ST_CNA))
-			break;
-
-		udelay(10);
-	}
-
-	if (i <= 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n",
-		       dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status);
-#endif
-		return -1;
-	}
-
-	wv_ack(dev);
-
-	/* Set the action command header. */
-	memset(&cb, 0x00, sizeof(cb));
-	cb.ac_command = AC_CFLD_EL | (AC_CFLD_CMD & acmd_diagnose);
-	cb.ac_link = OFFSET_CU;
-	obram_write(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
-
-	if (wv_synchronous_cmd(dev, "diag()") == -1)
-		return -1;
-
-	obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
-	if (cb.ac_status & AC_SFLD_FAIL) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wv_82586_start(): i82586 Self Test failed.\n",
-		       dev->name);
-#endif
-		return -1;
-	}
-#ifdef DEBUG_I82586_SHOW
-	wv_scb_show(ioaddr);
-#endif
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_82586_start()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a standard configuration of the WaveLAN
- * controller (i82586).
- *
- * This routine is a violent hack. We use the first free transmit block
- * to make our configuration. In the buffer area, we create the three
- * configuration commands (linked). We make the previous NOP point to
- * the beginning of the buffer instead of the tx command. After, we go
- * as usual to the NOP command.
- * Note that only the last command (mc_set) will generate an interrupt.
- *
- * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit())
- */
-static void wv_82586_config(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	unsigned short txblock;
-	unsigned short txpred;
-	unsigned short tx_addr;
-	unsigned short nop_addr;
-	unsigned short tbd_addr;
-	unsigned short cfg_addr;
-	unsigned short ias_addr;
-	unsigned short mcs_addr;
-	ac_tx_t tx;
-	ac_nop_t nop;
-	ac_cfg_t cfg;		/* Configure action */
-	ac_ias_t ias;		/* IA-setup action */
-	ac_mcs_t mcs;		/* Multicast setup */
-	struct dev_mc_list *dmi;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_82586_config()\n", dev->name);
-#endif
-
-	/* Check nothing bad has happened */
-	if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO "%s: wv_82586_config(): Tx queue full.\n",
-		       dev->name);
-#endif
-		return;
-	}
-
-	/* Calculate addresses of next block and previous block. */
-	txblock = lp->tx_first_free;
-	txpred = txblock - TXBLOCKZ;
-	if (txpred < OFFSET_CU)
-		txpred += NTXBLOCKS * TXBLOCKZ;
-	lp->tx_first_free += TXBLOCKZ;
-	if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
-		lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
-
-	lp->tx_n_in_use++;
-
-	/* Calculate addresses of the different parts of the block. */
-	tx_addr = txblock;
-	nop_addr = tx_addr + sizeof(tx);
-	tbd_addr = nop_addr + sizeof(nop);
-	cfg_addr = tbd_addr + sizeof(tbd_t);	/* beginning of the buffer */
-	ias_addr = cfg_addr + sizeof(cfg);
-	mcs_addr = ias_addr + sizeof(ias);
-
-	/*
-	 * Transmit command
-	 */
-	tx.tx_h.ac_status = 0xFFFF;	/* Fake completion value */
-	obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
-		    (unsigned char *) &tx.tx_h.ac_status,
-		    sizeof(tx.tx_h.ac_status));
-
-	/*
-	 * NOP command
-	 */
-	nop.nop_h.ac_status = 0;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
-		    (unsigned char *) &nop.nop_h.ac_status,
-		    sizeof(nop.nop_h.ac_status));
-	nop.nop_h.ac_link = nop_addr;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
-		    (unsigned char *) &nop.nop_h.ac_link,
-		    sizeof(nop.nop_h.ac_link));
-
-	/* Create a configure action. */
-	memset(&cfg, 0x00, sizeof(cfg));
-
-	/*
-	 * For Linux we invert AC_CFG_ALOC() so as to conform
-	 * to the way that net packets reach us from above.
-	 * (See also ac_tx_t.)
-	 *
-	 * Updated from Wavelan Manual WCIN085B
-	 */
-	cfg.cfg_byte_cnt =
-	    AC_CFG_BYTE_CNT(sizeof(ac_cfg_t) - sizeof(ach_t));
-	cfg.cfg_fifolim = AC_CFG_FIFOLIM(4);
-	cfg.cfg_byte8 = AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0);
-	cfg.cfg_byte9 = AC_CFG_ELPBCK(0) |
-	    AC_CFG_ILPBCK(0) |
-	    AC_CFG_PRELEN(AC_CFG_PLEN_2) |
-	    AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE);
-	cfg.cfg_byte10 = AC_CFG_BOFMET(1) |
-	    AC_CFG_ACR(6) | AC_CFG_LINPRIO(0);
-	cfg.cfg_ifs = 0x20;
-	cfg.cfg_slotl = 0x0C;
-	cfg.cfg_byte13 = AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0);
-	cfg.cfg_byte14 = AC_CFG_FLGPAD(0) |
-	    AC_CFG_BTSTF(0) |
-	    AC_CFG_CRC16(0) |
-	    AC_CFG_NCRC(0) |
-	    AC_CFG_TNCRS(1) |
-	    AC_CFG_MANCH(0) |
-	    AC_CFG_BCDIS(0) | AC_CFG_PRM(lp->promiscuous);
-	cfg.cfg_byte15 = AC_CFG_ICDS(0) |
-	    AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0);
-/*
-  cfg.cfg_min_frm_len = AC_CFG_MNFRM(64);
-*/
-	cfg.cfg_min_frm_len = AC_CFG_MNFRM(8);
-
-	cfg.cfg_h.ac_command = (AC_CFLD_CMD & acmd_configure);
-	cfg.cfg_h.ac_link = ias_addr;
-	obram_write(ioaddr, cfg_addr, (unsigned char *) &cfg, sizeof(cfg));
-
-	/* Set up the MAC address */
-	memset(&ias, 0x00, sizeof(ias));
-	ias.ias_h.ac_command = (AC_CFLD_CMD & acmd_ia_setup);
-	ias.ias_h.ac_link = mcs_addr;
-	memcpy(&ias.ias_addr[0], (unsigned char *) &dev->dev_addr[0],
-	       sizeof(ias.ias_addr));
-	obram_write(ioaddr, ias_addr, (unsigned char *) &ias, sizeof(ias));
-
-	/* Initialize adapter's Ethernet multicast addresses */
-	memset(&mcs, 0x00, sizeof(mcs));
-	mcs.mcs_h.ac_command = AC_CFLD_I | (AC_CFLD_CMD & acmd_mc_setup);
-	mcs.mcs_h.ac_link = nop_addr;
-	mcs.mcs_cnt = WAVELAN_ADDR_SIZE * lp->mc_count;
-	obram_write(ioaddr, mcs_addr, (unsigned char *) &mcs, sizeof(mcs));
-
-	/* Any address to set? */
-	if (lp->mc_count) {
-		for (dmi = dev->mc_list; dmi; dmi = dmi->next)
-			outsw(PIOP1(ioaddr), (u16 *) dmi->dmi_addr,
-			      WAVELAN_ADDR_SIZE >> 1);
-
-#ifdef DEBUG_CONFIG_INFO
-		printk(KERN_DEBUG
-		       "%s: wv_82586_config(): set %d multicast addresses:\n",
-		       dev->name, lp->mc_count);
-		for (dmi = dev->mc_list; dmi; dmi = dmi->next)
-			printk(KERN_DEBUG " %pM\n", dmi->dmi_addr);
-#endif
-	}
-
-	/*
-	 * Overwrite the predecessor NOP link
-	 * so that it points to the configure action.
-	 */
-	nop_addr = txpred + sizeof(tx);
-	nop.nop_h.ac_status = 0;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
-		    (unsigned char *) &nop.nop_h.ac_status,
-		    sizeof(nop.nop_h.ac_status));
-	nop.nop_h.ac_link = cfg_addr;
-	obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
-		    (unsigned char *) &nop.nop_h.ac_link,
-		    sizeof(nop.nop_h.ac_link));
-
-	/* Job done, clear the flag */
-	lp->reconfig_82586 = 0;
-
-	if (lp->tx_first_in_use == I82586NULL)
-		lp->tx_first_in_use = txblock;
-
-	if (lp->tx_n_in_use == (NTXBLOCKS - 1))
-		netif_stop_queue(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_82586_config()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine, called by wavelan_close(), gracefully stops the 
- * WaveLAN controller (i82586).
- * (called by wavelan_close())
- */
-static void wv_82586_stop(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-	u16 scb_cmd;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_82586_stop()\n", dev->name);
-#endif
-
-	/* Suspend both command unit and receive unit. */
-	scb_cmd =
-	    (SCB_CMD_CUC & SCB_CMD_CUC_SUS) | (SCB_CMD_RUC &
-					       SCB_CMD_RUC_SUS);
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &scb_cmd, sizeof(scb_cmd));
-	set_chan_attn(ioaddr, lp->hacr);
-
-	/* No more interrupts */
-	wv_ints_off(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_82586_stop()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Totally reset the WaveLAN and restart it.
- * Performs the following actions:
- *	1. A power reset (reset DMA)
- *	2. Initialize the radio modem (using wv_mmc_init)
- *	3. Reset & Configure LAN controller (using wv_82586_start)
- *	4. Start the LAN controller's command unit
- *	5. Start the LAN controller's receive unit
- * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open())
- */
-static int wv_hw_reset(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long ioaddr = dev->base_addr;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: ->wv_hw_reset(dev=0x%x)\n", dev->name,
-	       (unsigned int) dev);
-#endif
-
-	/* Increase the number of resets done. */
-	lp->nresets++;
-
-	wv_hacr_reset(ioaddr);
-	lp->hacr = HACR_DEFAULT;
-
-	if ((wv_mmc_init(dev) < 0) || (wv_82586_start(dev) < 0))
-		return -1;
-
-	/* Enable the card to send interrupts. */
-	wv_ints_on(dev);
-
-	/* Start card functions */
-	if (wv_cu_start(dev) < 0)
-		return -1;
-
-	/* Setup the controller and parameters */
-	wv_82586_config(dev);
-
-	/* Finish configuration with the receive unit */
-	if (wv_ru_start(dev) < 0)
-		return -1;
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Check if there is a WaveLAN at the specific base address.
- * As a side effect, this reads the MAC address.
- * (called in wavelan_probe() and init_module())
- */
-static int wv_check_ioaddr(unsigned long ioaddr, u8 * mac)
-{
-	int i;			/* Loop counter */
-
-	/* Check if the base address if available. */
-	if (!request_region(ioaddr, sizeof(ha_t), "wavelan probe"))
-		return -EBUSY;		/* ioaddr already used */
-
-	/* Reset host interface */
-	wv_hacr_reset(ioaddr);
-
-	/* Read the MAC address from the parameter storage area. */
-	psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_univ_mac_addr),
-		 mac, 6);
-
-	release_region(ioaddr, sizeof(ha_t));
-
-	/*
-	 * Check the first three octets of the address for the manufacturer's code.
-	 * Note: if this can't find your WaveLAN card, you've got a
-	 * non-NCR/AT&T/Lucent ISA card.  See wavelan.p.h for detail on
-	 * how to configure your card.
-	 */
-	for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
-		if ((mac[0] == MAC_ADDRESSES[i][0]) &&
-		    (mac[1] == MAC_ADDRESSES[i][1]) &&
-		    (mac[2] == MAC_ADDRESSES[i][2]))
-			return 0;
-
-#ifdef DEBUG_CONFIG_INFO
-	printk(KERN_WARNING
-	       "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n",
-	       ioaddr, mac[0], mac[1], mac[2]);
-#endif
-	return -ENODEV;
-}
-
-/************************ INTERRUPT HANDLING ************************/
-
-/*
- * This function is the interrupt handler for the WaveLAN card. This
- * routine will be called whenever: 
- */
-static irqreturn_t wavelan_interrupt(int irq, void *dev_id)
-{
-	struct net_device *dev;
-	unsigned long ioaddr;
-	net_local *lp;
-	u16 hasr;
-	u16 status;
-	u16 ack_cmd;
-
-	dev = dev_id;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
-#endif
-
-	lp = netdev_priv(dev);
-	ioaddr = dev->base_addr;
-
-#ifdef DEBUG_INTERRUPT_INFO
-	/* Check state of our spinlock */
-	if(spin_is_locked(&lp->spinlock))
-		printk(KERN_DEBUG
-		       "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
-		       dev->name);
-#endif
-
-	/* Prevent reentrancy. We need to do that because we may have
-	 * multiple interrupt handler running concurrently.
-	 * It is safe because interrupts are disabled before acquiring
-	 * the spinlock. */
-	spin_lock(&lp->spinlock);
-
-	/* We always had spurious interrupts at startup, but lately I
-	 * saw them comming *between* the request_irq() and the
-	 * spin_lock_irqsave() in wavelan_open(), so the spinlock
-	 * protection is no enough.
-	 * So, we also check lp->hacr that will tell us is we enabled
-	 * irqs or not (see wv_ints_on()).
-	 * We can't use netif_running(dev) because we depend on the
-	 * proper processing of the irq generated during the config. */
-
-	/* Which interrupt it is ? */
-	hasr = hasr_read(ioaddr);
-
-#ifdef DEBUG_INTERRUPT_INFO
-	printk(KERN_INFO
-	       "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n",
-	       dev->name, hasr, lp->hacr);
-#endif
-
-	/* Check modem interrupt */
-	if ((hasr & HASR_MMC_INTR) && (lp->hacr & HACR_MMC_INT_ENABLE)) {
-		u8 dce_status;
-
-		/*
-		 * Interrupt from the modem management controller.
-		 * This will clear it -- ignored for now.
-		 */
-		mmc_read(ioaddr, mmroff(0, mmr_dce_status), &dce_status,
-			 sizeof(dce_status));
-
-#ifdef DEBUG_INTERRUPT_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n",
-		       dev->name, dce_status);
-#endif
-	}
-
-	/* Check if not controller interrupt */
-	if (((hasr & HASR_82586_INTR) == 0) ||
-	    ((lp->hacr & HACR_82586_INT_ENABLE) == 0)) {
-#ifdef DEBUG_INTERRUPT_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n",
-		       dev->name, hasr);
-#endif
-		spin_unlock (&lp->spinlock);
-		return IRQ_NONE;
-	}
-
-	/* Read interrupt data. */
-	obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
-		   (unsigned char *) &status, sizeof(status));
-
-	/*
-	 * Acknowledge the interrupt(s).
-	 */
-	ack_cmd = status & SCB_ST_INT;
-	obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
-		    (unsigned char *) &ack_cmd, sizeof(ack_cmd));
-	set_chan_attn(ioaddr, lp->hacr);
-
-#ifdef DEBUG_INTERRUPT_INFO
-	printk(KERN_DEBUG "%s: wavelan_interrupt(): status 0x%04x.\n",
-	       dev->name, status);
-#endif
-
-	/* Command completed. */
-	if ((status & SCB_ST_CX) == SCB_ST_CX) {
-#ifdef DEBUG_INTERRUPT_INFO
-		printk(KERN_DEBUG
-		       "%s: wavelan_interrupt(): command completed.\n",
-		       dev->name);
-#endif
-		wv_complete(dev, ioaddr, lp);
-	}
-
-	/* Frame received. */
-	if ((status & SCB_ST_FR) == SCB_ST_FR) {
-#ifdef DEBUG_INTERRUPT_INFO
-		printk(KERN_DEBUG
-		       "%s: wavelan_interrupt(): received packet.\n",
-		       dev->name);
-#endif
-		wv_receive(dev);
-	}
-
-	/* Check the state of the command unit. */
-	if (((status & SCB_ST_CNA) == SCB_ST_CNA) ||
-	    (((status & SCB_ST_CUS) != SCB_ST_CUS_ACTV) &&
-	     (netif_running(dev)))) {
-#ifdef DEBUG_INTERRUPT_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_interrupt(): CU inactive -- restarting\n",
-		       dev->name);
-#endif
-		wv_hw_reset(dev);
-	}
-
-	/* Check the state of the command unit. */
-	if (((status & SCB_ST_RNR) == SCB_ST_RNR) ||
-	    (((status & SCB_ST_RUS) != SCB_ST_RUS_RDY) &&
-	     (netif_running(dev)))) {
-#ifdef DEBUG_INTERRUPT_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_interrupt(): RU not ready -- restarting\n",
-		       dev->name);
-#endif
-		wv_hw_reset(dev);
-	}
-
-	/* Release spinlock */
-	spin_unlock (&lp->spinlock);
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
-#endif
-	return IRQ_HANDLED;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Watchdog: when we start a transmission, a timer is set for us in the
- * kernel.  If the transmission completes, this timer is disabled. If
- * the timer expires, we are called and we try to unlock the hardware.
- */
-static void wavelan_watchdog(struct net_device *	dev)
-{
-	net_local *lp = netdev_priv(dev);
-	u_long		ioaddr = dev->base_addr;
-	unsigned long	flags;
-	unsigned int	nreaped;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
-#endif
-
-#ifdef DEBUG_INTERRUPT_ERROR
-	printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
-	       dev->name);
-#endif
-
-	/* Check that we came here for something */
-	if (lp->tx_n_in_use <= 0) {
-		return;
-	}
-
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Try to see if some buffers are not free (in case we missed
-	 * an interrupt */
-	nreaped = wv_complete(dev, ioaddr, lp);
-
-#ifdef DEBUG_INTERRUPT_INFO
-	printk(KERN_DEBUG
-	       "%s: wavelan_watchdog(): %d reaped, %d remain.\n",
-	       dev->name, nreaped, lp->tx_n_in_use);
-#endif
-
-#ifdef DEBUG_PSA_SHOW
-	{
-		psa_t psa;
-		psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-		wv_psa_show(&psa);
-	}
-#endif
-#ifdef DEBUG_MMC_SHOW
-	wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82586_SHOW
-	wv_cu_show(dev);
-#endif
-
-	/* If no buffer has been freed */
-	if (nreaped == 0) {
-#ifdef DEBUG_INTERRUPT_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_watchdog(): cleanup failed, trying reset\n",
-		       dev->name);
-#endif
-		wv_hw_reset(dev);
-	}
-
-	/* At this point, we should have some free Tx buffer ;-) */
-	if (lp->tx_n_in_use < NTXBLOCKS - 1)
-		netif_wake_queue(dev);
-
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-	
-#ifdef DEBUG_INTERRUPT_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
-#endif
-}
-
-/********************* CONFIGURATION CALLBACKS *********************/
-/*
- * Here are the functions called by the Linux networking code (NET3)
- * for initialization, configuration and deinstallations of the 
- * WaveLAN ISA hardware.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Configure and start up the WaveLAN PCMCIA adaptor.
- * Called by NET3 when it "opens" the device.
- */
-static int wavelan_open(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long	flags;
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
-	       (unsigned int) dev);
-#endif
-
-	/* Check irq */
-	if (dev->irq == 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_WARNING "%s: wavelan_open(): no IRQ\n",
-		       dev->name);
-#endif
-		return -ENXIO;
-	}
-
-	if (request_irq(dev->irq, &wavelan_interrupt, 0, "WaveLAN", dev) != 0) 
-	{
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_WARNING "%s: wavelan_open(): invalid IRQ\n",
-		       dev->name);
-#endif
-		return -EAGAIN;
-	}
-
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	if (wv_hw_reset(dev) != -1) {
-		netif_start_queue(dev);
-	} else {
-		free_irq(dev->irq, dev);
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_open(): impossible to start the card\n",
-		       dev->name);
-#endif
-		spin_unlock_irqrestore(&lp->spinlock, flags);
-		return -EAGAIN;
-	}
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-	
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
-#endif
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Shut down the WaveLAN ISA card.
- * Called by NET3 when it "closes" the device.
- */
-static int wavelan_close(struct net_device * dev)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
-	       (unsigned int) dev);
-#endif
-
-	netif_stop_queue(dev);
-
-	/*
-	 * Flush the Tx and disable Rx.
-	 */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	wv_82586_stop(dev);
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	free_irq(dev->irq, dev);
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
-#endif
-	return 0;
-}
-
-static const struct net_device_ops wavelan_netdev_ops = {
-	.ndo_open 		= wavelan_open,
-	.ndo_stop 		= wavelan_close,
-	.ndo_start_xmit		= wavelan_packet_xmit,
-	.ndo_set_multicast_list = wavelan_set_multicast_list,
-        .ndo_tx_timeout		= wavelan_watchdog,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-#ifdef SET_MAC_ADDRESS
-	.ndo_set_mac_address	= wavelan_set_mac_address
-#else
-	.ndo_set_mac_address 	= eth_mac_addr,
-#endif
-};
-
-
-/*------------------------------------------------------------------*/
-/*
- * Probe an I/O address, and if the WaveLAN is there configure the
- * device structure
- * (called by wavelan_probe() and via init_module()).
- */
-static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
-{
-	u8 irq_mask;
-	int irq;
-	net_local *lp;
-	mac_addr mac;
-	int err;
-
-	if (!request_region(ioaddr, sizeof(ha_t), "wavelan"))
-		return -EADDRINUSE;
-
-	err = wv_check_ioaddr(ioaddr, mac);
-	if (err)
-		goto out;
-
-	memcpy(dev->dev_addr, mac, 6);
-
-	dev->base_addr = ioaddr;
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n",
-	       dev->name, (unsigned int) dev, ioaddr);
-#endif
-
-	/* Check IRQ argument on command line. */
-	if (dev->irq != 0) {
-		irq_mask = wv_irq_to_psa(dev->irq);
-
-		if (irq_mask == 0) {
-#ifdef DEBUG_CONFIG_ERROR
-			printk(KERN_WARNING
-			       "%s: wavelan_config(): invalid IRQ %d ignored.\n",
-			       dev->name, dev->irq);
-#endif
-			dev->irq = 0;
-		} else {
-#ifdef DEBUG_CONFIG_INFO
-			printk(KERN_DEBUG
-			       "%s: wavelan_config(): changing IRQ to %d\n",
-			       dev->name, dev->irq);
-#endif
-			psa_write(ioaddr, HACR_DEFAULT,
-				  psaoff(0, psa_int_req_no), &irq_mask, 1);
-			/* update the Wavelan checksum */
-			update_psa_checksum(dev, ioaddr, HACR_DEFAULT);
-			wv_hacr_reset(ioaddr);
-		}
-	}
-
-	psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_int_req_no),
-		 &irq_mask, 1);
-	if ((irq = wv_psa_to_irq(irq_mask)) == -1) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_INFO
-		       "%s: wavelan_config(): could not wavelan_map_irq(%d).\n",
-		       dev->name, irq_mask);
-#endif
-		err = -EAGAIN;
-		goto out;
-	}
-
-	dev->irq = irq;
-
-	dev->mem_start = 0x0000;
-	dev->mem_end = 0x0000;
-	dev->if_port = 0;
-
-	/* Initialize device structures */
-	memset(netdev_priv(dev), 0, sizeof(net_local));
-	lp = netdev_priv(dev);
-
-	/* Back link to the device structure. */
-	lp->dev = dev;
-	/* Add the device at the beginning of the linked list. */
-	lp->next = wavelan_list;
-	wavelan_list = lp;
-
-	lp->hacr = HACR_DEFAULT;
-
-	/* Multicast stuff */
-	lp->promiscuous = 0;
-	lp->mc_count = 0;
-
-	/* Init spinlock */
-	spin_lock_init(&lp->spinlock);
-
-	dev->netdev_ops = &wavelan_netdev_ops;
-	dev->watchdog_timeo = WATCHDOG_JIFFIES;
-	dev->wireless_handlers = &wavelan_handler_def;
-	lp->wireless_data.spy_data = &lp->spy_data;
-	dev->wireless_data = &lp->wireless_data;
-
-	dev->mtu = WAVELAN_MTU;
-
-	/* Display nice information. */
-	wv_init_info(dev);
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG "%s: <-wavelan_config()\n", dev->name);
-#endif
-	return 0;
-out:
-	release_region(ioaddr, sizeof(ha_t));
-	return err;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Check for a network adaptor of this type.  Return '0' iff one 
- * exists.  There seem to be different interpretations of
- * the initial value of dev->base_addr.
- * We follow the example in drivers/net/ne.c.
- * (called in "Space.c")
- */
-struct net_device * __init wavelan_probe(int unit)
-{
-	struct net_device *dev;
-	short base_addr;
-	int def_irq;
-	int i;
-	int r = 0;
-
-	/* compile-time check the sizes of structures */
-	BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
-	BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
-	BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
-	BUILD_BUG_ON(sizeof(ha_t) != HA_SIZE);
-
-	dev = alloc_etherdev(sizeof(net_local));
-	if (!dev)
-		return ERR_PTR(-ENOMEM);
-
-	sprintf(dev->name, "eth%d", unit);
-	netdev_boot_setup_check(dev);
-	base_addr = dev->base_addr;
-	def_irq = dev->irq;
-
-#ifdef DEBUG_CALLBACK_TRACE
-	printk(KERN_DEBUG
-	       "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n",
-	       dev->name, dev, (unsigned int) dev->base_addr);
-#endif
-
-	/* Don't probe at all. */
-	if (base_addr < 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_WARNING
-		       "%s: wavelan_probe(): invalid base address\n",
-		       dev->name);
-#endif
-		r = -ENXIO;
-	} else if (base_addr > 0x100) { /* Check a single specified location. */
-		r = wavelan_config(dev, base_addr);
-#ifdef DEBUG_CONFIG_INFO
-		if (r != 0)
-			printk(KERN_DEBUG
-			       "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n",
-			       dev->name, base_addr);
-#endif
-
-#ifdef DEBUG_CALLBACK_TRACE
-		printk(KERN_DEBUG "%s: <-wavelan_probe()\n", dev->name);
-#endif
-	} else { /* Scan all possible addresses of the WaveLAN hardware. */
-		for (i = 0; i < ARRAY_SIZE(iobase); i++) {
-			dev->irq = def_irq;
-			if (wavelan_config(dev, iobase[i]) == 0) {
-#ifdef DEBUG_CALLBACK_TRACE
-				printk(KERN_DEBUG
-				       "%s: <-wavelan_probe()\n",
-				       dev->name);
-#endif
-				break;
-			}
-		}
-		if (i == ARRAY_SIZE(iobase))
-			r = -ENODEV;
-	}
-	if (r) 
-		goto out;
-	r = register_netdev(dev);
-	if (r)
-		goto out1;
-	return dev;
-out1:
-	release_region(dev->base_addr, sizeof(ha_t));
-	wavelan_list = wavelan_list->next;
-out:
-	free_netdev(dev);
-	return ERR_PTR(r);
-}
-
-/****************************** MODULE ******************************/
-/*
- * Module entry point: insertion and removal
- */
-
-#ifdef	MODULE
-/*------------------------------------------------------------------*/
-/*
- * Insertion of the module
- * I'm now quite proud of the multi-device support.
- */
-int __init init_module(void)
-{
-	int ret = -EIO;		/* Return error if no cards found */
-	int i;
-
-#ifdef DEBUG_MODULE_TRACE
-	printk(KERN_DEBUG "-> init_module()\n");
-#endif
-
-	/* If probing is asked */
-	if (io[0] == 0) {
-#ifdef DEBUG_CONFIG_ERROR
-		printk(KERN_WARNING
-		       "WaveLAN init_module(): doing device probing (bad !)\n");
-		printk(KERN_WARNING
-		       "Specify base addresses while loading module to correct the problem\n");
-#endif
-
-		/* Copy the basic set of address to be probed. */
-		for (i = 0; i < ARRAY_SIZE(iobase); i++)
-			io[i] = iobase[i];
-	}
-
-
-	/* Loop on all possible base addresses. */
-	for (i = 0; i < ARRAY_SIZE(io) && io[i] != 0; i++) {
-		struct net_device *dev = alloc_etherdev(sizeof(net_local));
-		if (!dev)
-			break;
-		if (name[i])
-			strcpy(dev->name, name[i]);	/* Copy name */
-		dev->base_addr = io[i];
-		dev->irq = irq[i];
-
-		/* Check if there is something at this base address. */
-		if (wavelan_config(dev, io[i]) == 0) {
-			if (register_netdev(dev) != 0) {
-				release_region(dev->base_addr, sizeof(ha_t));
-				wavelan_list = wavelan_list->next;
-			} else {
-				ret = 0;
-				continue;
-			}
-		}
-		free_netdev(dev);
-	}
-
-#ifdef DEBUG_CONFIG_ERROR
-	if (!wavelan_list)
-		printk(KERN_WARNING
-		       "WaveLAN init_module(): no device found\n");
-#endif
-
-#ifdef DEBUG_MODULE_TRACE
-	printk(KERN_DEBUG "<- init_module()\n");
-#endif
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Removal of the module
- */
-void cleanup_module(void)
-{
-#ifdef DEBUG_MODULE_TRACE
-	printk(KERN_DEBUG "-> cleanup_module()\n");
-#endif
-
-	/* Loop on all devices and release them. */
-	while (wavelan_list) {
-		struct net_device *dev = wavelan_list->dev;
-
-#ifdef DEBUG_CONFIG_INFO
-		printk(KERN_DEBUG
-		       "%s: cleanup_module(): removing device at 0x%x\n",
-		       dev->name, (unsigned int) dev);
-#endif
-		unregister_netdev(dev);
-
-		release_region(dev->base_addr, sizeof(ha_t));
-		wavelan_list = wavelan_list->next;
-
-		free_netdev(dev);
-	}
-
-#ifdef DEBUG_MODULE_TRACE
-	printk(KERN_DEBUG "<- cleanup_module()\n");
-#endif
-}
-#endif				/* MODULE */
-MODULE_LICENSE("GPL");
-
-/*
- * This software may only be used and distributed
- * according to the terms of the GNU General Public License.
- *
- * This software was developed as a component of the
- * Linux operating system.
- * It is based on other device drivers and information
- * either written or supplied by:
- *	Ajay Bakre (bakre@paul.rutgers.edu),
- *	Donald Becker (becker@scyld.com),
- *	Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com),
- *	Anders Klemets (klemets@it.kth.se),
- *	Vladimir V. Kolpakov (w@stier.koenig.ru),
- *	Marc Meertens (Marc.Meertens@Utrecht.NCR.com),
- *	Pauline Middelink (middelin@polyware.iaf.nl),
- *	Robert Morris (rtm@das.harvard.edu),
- *	Jean Tourrilhes (jt@hplb.hpl.hp.com),
- *	Girish Welling (welling@paul.rutgers.edu),
- *
- * Thanks go also to:
- *	James Ashton (jaa101@syseng.anu.edu.au),
- *	Alan Cox (alan@lxorguk.ukuu.org.uk),
- *	Allan Creighton (allanc@cs.usyd.edu.au),
- *	Matthew Geier (matthew@cs.usyd.edu.au),
- *	Remo di Giovanni (remo@cs.usyd.edu.au),
- *	Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de),
- *	Vipul Gupta (vgupta@cs.binghamton.edu),
- *	Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
- *	Tim Nicholson (tim@cs.usyd.edu.au),
- *	Ian Parkin (ian@cs.usyd.edu.au),
- *	John Rosenberg (johnr@cs.usyd.edu.au),
- *	George Rossi (george@phm.gov.au),
- *	Arthur Scott (arthur@cs.usyd.edu.au),
- *	Peter Storey,
- * for their assistance and advice.
- *
- * Please send bug reports, updates, comments to:
- *
- * Bruce Janson                                    Email:  bruce@cs.usyd.edu.au
- * Basser Department of Computer Science           Phone:  +61-2-9351-3423
- * University of Sydney, N.S.W., 2006, AUSTRALIA   Fax:    +61-2-9351-3838
- */
diff --git a/drivers/net/wireless/wavelan.h b/drivers/net/wireless/wavelan.h
deleted file mode 100644
index 9ab360558ff..00000000000
--- a/drivers/net/wireless/wavelan.h
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- *	WaveLAN ISA driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- * Original copyright follows. See wavelan.p.h for details.
- *
- * This file contains the declarations for the WaveLAN hardware. Note that
- * the WaveLAN ISA includes a i82586 controller (see definitions in
- * file i82586.h).
- *
- * The main difference between the ISA hardware and the PCMCIA one is
- * the Ethernet controller (i82586 instead of i82593).
- * The i82586 allows multiple transmit buffers.  The PSA needs to be accessed
- * through the host interface.
- */
-
-#ifndef _WAVELAN_H
-#define	_WAVELAN_H
-
-/************************** MAGIC NUMBERS ***************************/
-
-/* Detection of the WaveLAN card is done by reading the MAC
- * address from the card and checking it.  If you have a non-AT&T
- * product (OEM, like DEC RoamAbout, Digital Ocean, or Epson),
- * you might need to modify this part to accommodate your hardware.
- */
-static const char	MAC_ADDRESSES[][3] =
-{
-  { 0x08, 0x00, 0x0E },		/* AT&T WaveLAN (standard) & DEC RoamAbout */
-  { 0x08, 0x00, 0x6A },		/* AT&T WaveLAN (alternate) */
-  { 0x00, 0x00, 0xE1 },		/* Hitachi Wavelan */
-  { 0x00, 0x60, 0x1D }		/* Lucent Wavelan (another one) */
-  /* Add your card here and send me the patch! */
-};
-
-#define WAVELAN_ADDR_SIZE	6	/* Size of a MAC address */
-
-#define WAVELAN_MTU		1500	/* Maximum size of WaveLAN packet */
-
-#define	MAXDATAZ		(WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU)
-
-/*
- * Constants used to convert channels to frequencies
- */
-
-/* Frequency available in the 2.0 modem, in units of 250 kHz
- * (as read in the offset register of the dac area).
- * Used to map channel numbers used by `wfreqsel' to frequencies
- */
-static const short	channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
-				    0xD0, 0xF0, 0xF8, 0x150 };
-
-/* Frequencies of the 1.0 modem (fixed frequencies).
- * Use to map the PSA `subband' to a frequency
- * Note : all frequencies apart from the first one need to be multiplied by 10
- */
-static const int	fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
-
-
-
-/*************************** PC INTERFACE ****************************/
-
-/*
- * Host Adaptor structure.
- * (base is board port address).
- */
-typedef union hacs_u	hacs_u;
-union hacs_u
-{
-	unsigned short	hu_command;		/* Command register */
-#define		HACR_RESET		0x0001	/* Reset board */
-#define		HACR_CA			0x0002	/* Set Channel Attention for 82586 */
-#define		HACR_16BITS		0x0004	/* 16-bit operation (0 => 8bits) */
-#define		HACR_OUT0		0x0008	/* General purpose output pin 0 */
-						/* not used - must be 1 */
-#define		HACR_OUT1		0x0010	/* General purpose output pin 1 */
-						/* not used - must be 1 */
-#define		HACR_82586_INT_ENABLE	0x0020	/* Enable 82586 interrupts */
-#define		HACR_MMC_INT_ENABLE	0x0040	/* Enable MMC interrupts */
-#define		HACR_INTR_CLR_ENABLE	0x0080	/* Enable interrupt status read/clear */
-	unsigned short	hu_status;		/* Status Register */
-#define		HASR_82586_INTR		0x0001	/* Interrupt request from 82586 */
-#define		HASR_MMC_INTR		0x0002	/* Interrupt request from MMC */
-#define		HASR_MMC_BUSY		0x0004	/* MMC busy indication */
-#define		HASR_PSA_BUSY		0x0008	/* LAN parameter storage area busy */
-} __attribute__ ((packed));
-
-typedef struct ha_t	ha_t;
-struct ha_t
-{
-	hacs_u		ha_cs;		/* Command and status registers */
-#define 		ha_command	ha_cs.hu_command
-#define 		ha_status	ha_cs.hu_status
-	unsigned short	ha_mmcr;	/* Modem Management Ctrl Register */
-	unsigned short	ha_pior0;	/* Program I/O Address Register Port 0 */
-	unsigned short	ha_piop0;	/* Program I/O Port 0 */
-	unsigned short	ha_pior1;	/* Program I/O Address Register Port 1 */
-	unsigned short	ha_piop1;	/* Program I/O Port 1 */
-	unsigned short	ha_pior2;	/* Program I/O Address Register Port 2 */
-	unsigned short	ha_piop2;	/* Program I/O Port 2 */
-};
-
-#define HA_SIZE		16
-
-#define	hoff(p,f) 	(unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0)
-#define	HACR(p)		hoff(p, ha_command)
-#define	HASR(p)		hoff(p, ha_status)
-#define	MMCR(p)		hoff(p, ha_mmcr)
-#define	PIOR0(p)	hoff(p, ha_pior0)
-#define	PIOP0(p)	hoff(p, ha_piop0)
-#define	PIOR1(p)	hoff(p, ha_pior1)
-#define	PIOP1(p)	hoff(p, ha_piop1)
-#define	PIOR2(p)	hoff(p, ha_pior2)
-#define	PIOP2(p)	hoff(p, ha_piop2)
-
-/*
- * Program I/O Mode Register values.
- */
-#define STATIC_PIO		0	/* Mode 1: static mode */
-					/* RAM access ??? */
-#define AUTOINCR_PIO		1	/* Mode 2: auto increment mode */
-					/* RAM access ??? */
-#define AUTODECR_PIO		2	/* Mode 3: auto decrement mode */
-					/* RAM access ??? */
-#define PARAM_ACCESS_PIO	3	/* Mode 4: LAN parameter access mode */
-					/* Parameter access. */
-#define PIO_MASK		3	/* register mask */
-#define PIOM(cmd,piono)		((u_short)cmd << 10 << (piono * 2))
-
-#define	HACR_DEFAULT		(HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2))
-#define	HACR_INTRON		(HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE)
-
-/************************** MEMORY LAYOUT **************************/
-
-/*
- * Onboard 64 k RAM layout.
- * (Offsets from 0x0000.)
- */
-#define OFFSET_RU		0x0000		/* 75% memory */
-#define OFFSET_CU		0xC000		/* 25% memory */
-#define OFFSET_SCB		(OFFSET_ISCP - sizeof(scb_t))
-#define OFFSET_ISCP		(OFFSET_SCP - sizeof(iscp_t))
-#define OFFSET_SCP		I82586_SCP_ADDR
-
-#define	RXBLOCKZ		(sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ)
-#define	TXBLOCKZ		(sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ)
-
-#define	NRXBLOCKS		((OFFSET_CU - OFFSET_RU) / RXBLOCKZ)
-#define	NTXBLOCKS		((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ)
-
-/********************** PARAMETER STORAGE AREA **********************/
-
-/*
- * Parameter Storage Area (PSA).
- */
-typedef struct psa_t	psa_t;
-struct psa_t
-{
-  unsigned char	psa_io_base_addr_1;	/* [0x00] Base address 1 ??? */
-  unsigned char	psa_io_base_addr_2;	/* [0x01] Base address 2 */
-  unsigned char	psa_io_base_addr_3;	/* [0x02] Base address 3 */
-  unsigned char	psa_io_base_addr_4;	/* [0x03] Base address 4 */
-  unsigned char	psa_rem_boot_addr_1;	/* [0x04] Remote Boot Address 1 */
-  unsigned char	psa_rem_boot_addr_2;	/* [0x05] Remote Boot Address 2 */
-  unsigned char	psa_rem_boot_addr_3;	/* [0x06] Remote Boot Address 3 */
-  unsigned char	psa_holi_params;	/* [0x07] HOst Lan Interface (HOLI) Parameters */
-  unsigned char	psa_int_req_no;		/* [0x08] Interrupt Request Line */
-  unsigned char	psa_unused0[7];		/* [0x09-0x0F] unused */
-
-  unsigned char	psa_univ_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x10-0x15] Universal (factory) MAC Address */
-  unsigned char	psa_local_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x16-1B] Local MAC Address */
-  unsigned char	psa_univ_local_sel;	/* [0x1C] Universal Local Selection */
-#define		PSA_UNIVERSAL	0		/* Universal (factory) */
-#define		PSA_LOCAL	1		/* Local */
-  unsigned char	psa_comp_number;	/* [0x1D] Compatibility Number:	 */
-#define		PSA_COMP_PC_AT_915	0 	/* PC-AT 915 MHz 	 */
-#define		PSA_COMP_PC_MC_915	1 	/* PC-MC 915 MHz	 */
-#define		PSA_COMP_PC_AT_2400	2 	/* PC-AT 2.4 GHz	 */
-#define		PSA_COMP_PC_MC_2400	3 	/* PC-MC 2.4 GHz 	 */
-#define		PSA_COMP_PCMCIA_915	4 	/* PCMCIA 915 MHz or 2.0 */
-  unsigned char	psa_thr_pre_set;	/* [0x1E] Modem Threshold Preset */
-  unsigned char	psa_feature_select;	/* [0x1F] Call code required (1=on) */
-#define		PSA_FEATURE_CALL_CODE	0x01 	/* Call code required (Japan) */
-  unsigned char	psa_subband;		/* [0x20] Subband	  */
-#define		PSA_SUBBAND_915		0	/* 915 MHz or 2.0 */
-#define		PSA_SUBBAND_2425	1	/* 2425 MHz	  */
-#define		PSA_SUBBAND_2460	2	/* 2460 MHz	  */
-#define		PSA_SUBBAND_2484	3	/* 2484 MHz	  */
-#define		PSA_SUBBAND_2430_5	4	/* 2430.5 MHz	  */
-  unsigned char	psa_quality_thr;	/* [0x21] Modem Quality Threshold */
-  unsigned char	psa_mod_delay;		/* [0x22] Modem Delay (?) (reserved) */
-  unsigned char	psa_nwid[2];		/* [0x23-0x24] Network ID */
-  unsigned char	psa_nwid_select;	/* [0x25] Network ID Select On/Off */
-  unsigned char	psa_encryption_select;	/* [0x26] Encryption On/Off */
-  unsigned char	psa_encryption_key[8];	/* [0x27-0x2E] Encryption Key */
-  unsigned char	psa_databus_width;	/* [0x2F] AT bus width select 8/16 */
-  unsigned char	psa_call_code[8];	/* [0x30-0x37] (Japan) Call Code */
-  unsigned char	psa_nwid_prefix[2];	/* [0x38-0x39] Roaming domain */
-  unsigned char	psa_reserved[2];	/* [0x3A-0x3B] Reserved - fixed 00 */
-  unsigned char	psa_conf_status;	/* [0x3C] Conf Status, bit 0=1:config*/
-  unsigned char	psa_crc[2];		/* [0x3D] CRC-16 over PSA */
-  unsigned char	psa_crc_status;		/* [0x3F] CRC Valid Flag */
-};
-
-#define	PSA_SIZE	64
-
-/* Calculate offset of a field in the above structure.
- * Warning:  only even addresses are used. */
-#define	psaoff(p,f) 	((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
-
-/******************** MODEM MANAGEMENT INTERFACE ********************/
-
-/*
- * Modem Management Controller (MMC) write structure.
- */
-typedef struct mmw_t	mmw_t;
-struct mmw_t
-{
-  unsigned char	mmw_encr_key[8];	/* encryption key */
-  unsigned char	mmw_encr_enable;	/* Enable or disable encryption. */
-#define	MMW_ENCR_ENABLE_MODE	0x02	/* mode of security option */
-#define	MMW_ENCR_ENABLE_EN	0x01	/* Enable security option. */
-  unsigned char	mmw_unused0[1];		/* unused */
-  unsigned char	mmw_des_io_invert;	/* encryption option */
-#define	MMW_DES_IO_INVERT_RES	0x0F	/* reserved */
-#define	MMW_DES_IO_INVERT_CTRL	0xF0	/* control (?) (set to 0) */
-  unsigned char	mmw_unused1[5];		/* unused */
-  unsigned char	mmw_loopt_sel;		/* looptest selection */
-#define	MMW_LOOPT_SEL_DIS_NWID	0x40	/* Disable NWID filtering. */
-#define	MMW_LOOPT_SEL_INT	0x20	/* Activate Attention Request. */
-#define	MMW_LOOPT_SEL_LS	0x10	/* looptest, no collision avoidance */
-#define MMW_LOOPT_SEL_LT3A	0x08	/* looptest 3a */
-#define	MMW_LOOPT_SEL_LT3B	0x04	/* looptest 3b */
-#define	MMW_LOOPT_SEL_LT3C	0x02	/* looptest 3c */
-#define	MMW_LOOPT_SEL_LT3D	0x01	/* looptest 3d */
-  unsigned char	mmw_jabber_enable;	/* jabber timer enable */
-  /* Abort transmissions > 200 ms */
-  unsigned char	mmw_freeze;		/* freeze or unfreeze signal level */
-  /* 0 : signal level & qual updated for every new message, 1 : frozen */
-  unsigned char	mmw_anten_sel;		/* antenna selection */
-#define MMW_ANTEN_SEL_SEL	0x01	/* direct antenna selection */
-#define	MMW_ANTEN_SEL_ALG_EN	0x02	/* antenna selection algo. enable */
-  unsigned char	mmw_ifs;		/* inter frame spacing */
-  /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
-  unsigned char	mmw_mod_delay;	 	/* modem delay (synchro) */
-  unsigned char	mmw_jam_time;		/* jamming time (after collision) */
-  unsigned char	mmw_unused2[1];		/* unused */
-  unsigned char	mmw_thr_pre_set;	/* level threshold preset */
-  /* Discard all packet with signal < this value (4) */
-  unsigned char	mmw_decay_prm;		/* decay parameters */
-  unsigned char	mmw_decay_updat_prm;	/* decay update parameters */
-  unsigned char	mmw_quality_thr;	/* quality (z-quotient) threshold */
-  /* Discard all packet with quality < this value (3) */
-  unsigned char	mmw_netw_id_l;		/* NWID low order byte */
-  unsigned char	mmw_netw_id_h;		/* NWID high order byte */
-  /* Network ID or Domain : create virtual net on the air */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmw_mode_select;	/* for analog tests (set to 0) */
-  unsigned char	mmw_unused3[1];		/* unused */
-  unsigned char	mmw_fee_ctrl;		/* frequency EEPROM control */
-#define	MMW_FEE_CTRL_PRE	0x10	/* Enable protected instructions. */
-#define	MMW_FEE_CTRL_DWLD	0x08	/* Download EEPROM to mmc. */
-#define	MMW_FEE_CTRL_CMD	0x07	/* EEPROM commands:  */
-#define	MMW_FEE_CTRL_READ	0x06	/* Read */
-#define	MMW_FEE_CTRL_WREN	0x04	/* Write enable */
-#define	MMW_FEE_CTRL_WRITE	0x05	/* Write data to address. */
-#define	MMW_FEE_CTRL_WRALL	0x04	/* Write data to all addresses. */
-#define	MMW_FEE_CTRL_WDS	0x04	/* Write disable */
-#define	MMW_FEE_CTRL_PRREAD	0x16	/* Read addr from protect register */
-#define	MMW_FEE_CTRL_PREN	0x14	/* Protect register enable */
-#define	MMW_FEE_CTRL_PRCLEAR	0x17	/* Unprotect all registers. */
-#define	MMW_FEE_CTRL_PRWRITE	0x15	/* Write address in protect register */
-#define	MMW_FEE_CTRL_PRDS	0x14	/* Protect register disable */
-  /* Never issue the PRDS command:  it's irreversible! */
-
-  unsigned char	mmw_fee_addr;		/* EEPROM address */
-#define	MMW_FEE_ADDR_CHANNEL	0xF0	/* Select the channel. */
-#define	MMW_FEE_ADDR_OFFSET	0x0F	/* Offset in channel data */
-#define	MMW_FEE_ADDR_EN		0xC0	/* FEE_CTRL enable operations */
-#define	MMW_FEE_ADDR_DS		0x00	/* FEE_CTRL disable operations */
-#define	MMW_FEE_ADDR_ALL	0x40	/* FEE_CTRL all operations */
-#define	MMW_FEE_ADDR_CLEAR	0xFF	/* FEE_CTRL clear operations */
-
-  unsigned char	mmw_fee_data_l;		/* Write data to EEPROM. */
-  unsigned char	mmw_fee_data_h;		/* high octet */
-  unsigned char	mmw_ext_ant;		/* Setting for external antenna */
-#define	MMW_EXT_ANT_EXTANT	0x01	/* Select external antenna */
-#define	MMW_EXT_ANT_POL		0x02	/* Polarity of the antenna */
-#define	MMW_EXT_ANT_INTERNAL	0x00	/* Internal antenna */
-#define	MMW_EXT_ANT_EXTERNAL	0x03	/* External antenna */
-#define	MMW_EXT_ANT_IQ_TEST	0x1C	/* IQ test pattern (set to 0) */
-} __attribute__ ((packed));
-
-#define	MMW_SIZE	37
-
-#define	mmwoff(p,f) 	(unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
-
-/*
- * Modem Management Controller (MMC) read structure.
- */
-typedef struct mmr_t	mmr_t;
-struct mmr_t
-{
-  unsigned char	mmr_unused0[8];		/* unused */
-  unsigned char	mmr_des_status;		/* encryption status */
-  unsigned char	mmr_des_avail;		/* encryption available (0x55 read) */
-#define	MMR_DES_AVAIL_DES	0x55		/* DES available */
-#define	MMR_DES_AVAIL_AES	0x33		/* AES (AT&T) available */
-  unsigned char	mmr_des_io_invert;	/* des I/O invert register */
-  unsigned char	mmr_unused1[5];		/* unused */
-  unsigned char	mmr_dce_status;		/* DCE status */
-#define	MMR_DCE_STATUS_RX_BUSY		0x01	/* receiver busy */
-#define	MMR_DCE_STATUS_LOOPT_IND	0x02	/* loop test indicated */
-#define	MMR_DCE_STATUS_TX_BUSY		0x04	/* transmitter on */
-#define	MMR_DCE_STATUS_JBR_EXPIRED	0x08	/* jabber timer expired */
-#define MMR_DCE_STATUS			0x0F	/* mask to get the bits */
-  unsigned char	mmr_dsp_id;		/* DSP ID (AA = Daedalus rev A) */
-  unsigned char	mmr_unused2[2];		/* unused */
-  unsigned char	mmr_correct_nwid_l;	/* # of correct NWIDs rxd (low) */
-  unsigned char	mmr_correct_nwid_h;	/* # of correct NWIDs rxd (high) */
-  /* Warning:  read high-order octet first! */
-  unsigned char	mmr_wrong_nwid_l;	/* # of wrong NWIDs rxd (low) */
-  unsigned char	mmr_wrong_nwid_h;	/* # of wrong NWIDs rxd (high) */
-  unsigned char	mmr_thr_pre_set;	/* level threshold preset */
-#define	MMR_THR_PRE_SET		0x3F		/* level threshold preset */
-#define	MMR_THR_PRE_SET_CUR	0x80		/* Current signal above it */
-  unsigned char	mmr_signal_lvl;		/* signal level */
-#define	MMR_SIGNAL_LVL		0x3F		/* signal level */
-#define	MMR_SIGNAL_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_silence_lvl;	/* silence level (noise) */
-#define	MMR_SILENCE_LVL		0x3F		/* silence level */
-#define	MMR_SILENCE_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_sgnl_qual;		/* signal quality */
-#define	MMR_SGNL_QUAL		0x0F		/* signal quality */
-#define	MMR_SGNL_QUAL_ANT	0x80		/* current antenna used */
-  unsigned char	mmr_netw_id_l;		/* NWID low order byte (?) */
-  unsigned char	mmr_unused3[3];		/* unused */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmr_fee_status;		/* Status of frequency EEPROM */
-#define	MMR_FEE_STATUS_ID	0xF0		/* Modem revision ID */
-#define	MMR_FEE_STATUS_DWLD	0x08		/* Download in progress */
-#define	MMR_FEE_STATUS_BUSY	0x04		/* EEPROM busy */
-  unsigned char	mmr_unused4[1];		/* unused */
-  unsigned char	mmr_fee_data_l;		/* Read data from EEPROM (low) */
-  unsigned char	mmr_fee_data_h;		/* Read data from EEPROM (high) */
-} __attribute__ ((packed));
-
-#define	MMR_SIZE	36
-
-#define	mmroff(p,f) 	(unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
-
-/* Make the two above structures one */
-typedef union mm_t
-{
-  struct mmw_t	w;	/* Write to the mmc */
-  struct mmr_t	r;	/* Read from the mmc */
-} mm_t;
-
-#endif /* _WAVELAN_H */
-
-/*
- * This software may only be used and distributed
- * according to the terms of the GNU General Public License.
- *
- * For more details, see wavelan.c.
- */
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
deleted file mode 100644
index dbe8de6e5f5..00000000000
--- a/drivers/net/wireless/wavelan.p.h
+++ /dev/null
@@ -1,696 +0,0 @@
-/*
- *	WaveLAN ISA driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- *
- * This file contains all definitions and declarations necessary for the
- * WaveLAN ISA driver.  This file is a private header, so it should
- * be included only in wavelan.c!
- */
-
-#ifndef WAVELAN_P_H
-#define WAVELAN_P_H
-
-/************************** DOCUMENTATION ***************************/
-/*
- * This driver provides a Linux interface to the WaveLAN ISA hardware.
- * The WaveLAN is a product of Lucent (http://www.wavelan.com/).
- * This division was formerly part of NCR and then AT&T.
- * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean.
- *
- * To learn how to use this driver, read the NET3 HOWTO.
- * If you want to exploit the many other functionalities, read the comments
- * in the code.
- *
- * This driver is the result of the effort of many people (see below).
- */
-
-/* ------------------------ SPECIFIC NOTES ------------------------ */
-/*
- * Web page
- * --------
- *	I try to maintain a web page with the Wireless LAN Howto at :
- *	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
- *
- * SMP
- * ---
- *	We now are SMP compliant (I eventually fixed the remaining bugs).
- *	The driver has been tested on a dual P6-150 and survived my usual
- *	set of torture tests.
- *	Anyway, I spent enough time chasing interrupt re-entrancy during
- *	errors or reconfigure, and I designed the locked/unlocked sections
- *	of the driver with great care, and with the recent addition of
- *	the spinlock (thanks to the new API), we should be quite close to
- *	the truth.
- *	The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
- *	but better safe than sorry (especially at 2 Mb/s ;-).
- *
- *	I have also looked into disabling only our interrupt on the card
- *	(via HACR) instead of all interrupts in the processor (via cli),
- *	so that other driver are not impacted, and it look like it's
- *	possible, but it's very tricky to do right (full of races). As
- *	the gain would be mostly for SMP systems, it can wait...
- *
- * Debugging and options
- * ---------------------
- *	You will find below a set of '#define" allowing a very fine control
- *	on the driver behaviour and the debug messages printed.
- *	The main options are :
- *	o SET_PSA_CRC, to have your card correctly recognised by
- *	  an access point and the Point-to-Point diagnostic tool.
- *	o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
- *	  (otherwise we always start afresh with some defaults)
- *
- * wavelan.o is too darned big
- * ---------------------------
- *	That's true!  There is a very simple way to reduce the driver
- *	object by 33%!  Comment out the following line:
- *		#include <linux/wireless.h>
- *	Other compile options can also reduce the size of it...
- *
- * MAC address and hardware detection:
- * -----------------------------------
- *	The detection code for the WaveLAN checks that the first three
- *	octets of the MAC address fit the company code.  This type of
- *	detection works well for AT&T cards (because the AT&T code is
- *	hardcoded in wavelan.h), but of course will fail for other
- *	manufacturers.
- *
- *	If you are sure that your card is derived from the WaveLAN,
- *	here is the way to configure it:
- *	1) Get your MAC address
- *		a) With your card utilities (wfreqsel, instconf, etc.)
- *		b) With the driver:
- *			o compile the kernel with DEBUG_CONFIG_INFO enabled
- *			o Boot and look the card messages
- *	2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
- *	3) Compile and verify
- *	4) Send me the MAC code.  I will include it in the next version.
- *
- */
-
-/* --------------------- WIRELESS EXTENSIONS --------------------- */
-/*
- * This driver is the first to support "wireless extensions".
- * This set of extensions provides a standard way to control the wireless
- * characteristics of the hardware.  Applications such as mobile IP may
- * take advantage of it.
- *
- * It might be a good idea as well to fetch the wireless tools to
- * configure the device and play a bit.
- */
-
-/* ---------------------------- FILES ---------------------------- */
-/*
- * wavelan.c:		actual code for the driver:  C functions
- *
- * wavelan.p.h:		private header:  local types and variables for driver
- *
- * wavelan.h:		description of the hardware interface and structs
- *
- * i82586.h:		description of the Ethernet controller
- */
-
-/* --------------------------- HISTORY --------------------------- */
-/*
- * This is based on information in the drivers' headers. It may not be
- * accurate, and I guarantee only my best effort.
- *
- * The history of the WaveLAN drivers is as complicated as the history of
- * the WaveLAN itself (NCR -> AT&T -> Lucent).
- *
- * It all started with Anders Klemets <klemets@paul.rutgers.edu>
- * writing a WaveLAN ISA driver for the Mach microkernel.  Girish
- * Welling <welling@paul.rutgers.edu> had also worked on it.
- * Keith Moore modified this for the PCMCIA hardware.
- * 
- * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI
- * and added specific PCMCIA support (there is currently no equivalent
- * of the PCMCIA package under BSD).
- *
- * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD.
- *
- * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux.
- *
- * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver
- * (with help of the BSDI PCMCIA driver) for PCMCIA.
- * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work.
- * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
- * 2.00 cards correctly (2.4 GHz with frequency selection).
- * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
- * PCMCIA package (and bug corrections).
- *
- * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
- * patches to the PCMCIA driver.  Later, I added code in the ISA driver
- * for Wireless Extensions and full support of frequency selection
- * cards.  Then, I did the same to the PCMCIA driver, and did some
- * reorganisation.  Finally, I came back to the ISA driver to
- * upgrade it at the same level as the PCMCIA one and reorganise
- * the code.
- * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
- * much needed information on the WaveLAN hardware.
- */
-
-/* The original copyrights and literature mention others' names and
- * credits.  I don't know what their part in this development was.
- */
-
-/* By the way, for the copyright and legal stuff:
- * almost everybody wrote code under the GNU or BSD license (or similar),
- * and want their original copyright to remain somewhere in the
- * code (for myself, I go with the GPL).
- * Nobody wants to take responsibility for anything, except the fame.
- */
-
-/* --------------------------- CREDITS --------------------------- */
-/*
- * This software was developed as a component of the
- * Linux operating system.
- * It is based on other device drivers and information
- * either written or supplied by:
- *	Ajay Bakre <bakre@paul.rutgers.edu>,
- *	Donald Becker <becker@cesdis.gsfc.nasa.gov>,
- *	Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>,
- *	Brent Elphick <belphick@uwaterloo.ca>,
- *	Anders Klemets <klemets@it.kth.se>,
- *	Vladimir V. Kolpakov <w@stier.koenig.ru>,
- *	Marc Meertens <Marc.Meertens@Utrecht.NCR.com>,
- *	Pauline Middelink <middelin@polyware.iaf.nl>,
- *	Robert Morris <rtm@das.harvard.edu>,
- *	Jean Tourrilhes <jt@hpl.hp.com>,
- *	Girish Welling <welling@paul.rutgers.edu>,
- *	Clark Woodworth <clark@hiway1.exit109.com>
- *	Yongguang Zhang <ygz@isl.hrl.hac.com>
- *
- * Thanks go also to:
- *	James Ashton <jaa101@syseng.anu.edu.au>,
- *	Alan Cox <alan@lxorguk.ukuu.org.uk>,
- *	Allan Creighton <allanc@cs.usyd.edu.au>,
- *	Matthew Geier <matthew@cs.usyd.edu.au>,
- *	Remo di Giovanni <remo@cs.usyd.edu.au>,
- *	Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>,
- *	Vipul Gupta <vgupta@cs.binghamton.edu>,
- *	Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>,
- *	Tim Nicholson <tim@cs.usyd.edu.au>,
- *	Ian Parkin <ian@cs.usyd.edu.au>,
- *	John Rosenberg <johnr@cs.usyd.edu.au>,
- *	George Rossi <george@phm.gov.au>,
- *	Arthur Scott <arthur@cs.usyd.edu.au>,
- *	Stanislav Sinyagin <stas@isf.ru>
- *	and Peter Storey for their assistance and advice.
- *
- * Additional Credits:
- *
- *	My development has been done initially under Debian 1.1 (Linux 2.0.x)
- *	and now	under Debian 2.2, initially with an HP Vectra XP/60, and now
- *	an HP Vectra XP/90.
- *
- */
-
-/* ------------------------- IMPROVEMENTS ------------------------- */
-/*
- * I proudly present:
- *
- * Changes made in first pre-release:
- * ----------------------------------
- *	- reorganisation of the code, function name change
- *	- creation of private header (wavelan.p.h)
- *	- reorganised debug messages
- *	- more comments, history, etc.
- *	- mmc_init:  configure the PSA if not done
- *	- mmc_init:  correct default value of level threshold for PCMCIA
- *	- mmc_init:  2.00 detection better code for 2.00 initialization
- *	- better info at startup
- *	- IRQ setting (note:  this setting is permanent)
- *	- watchdog:  change strategy (and solve module removal problems)
- *	- add wireless extensions (ioctl and get_wireless_stats)
- *	  get/set nwid/frequency on fly, info for /proc/net/wireless
- *	- more wireless extensions:  SETSPY and GETSPY
- *	- make wireless extensions optional
- *	- private ioctl to set/get quality and level threshold, histogram
- *	- remove /proc/net/wavelan
- *	- suppress useless stuff from lp (net_local)
- *	- kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
- *	- add message level (debug stuff in /var/adm/debug and errors not
- *	  displayed at console and still in /var/adm/messages)
- *	- multi device support
- *	- start fixing the probe (init code)
- *	- more inlines
- *	- man page
- *	- many other minor details and cleanups
- *
- * Changes made in second pre-release:
- * -----------------------------------
- *	- clean up init code (probe and module init)
- *	- better multiple device support (module)
- *	- name assignment (module)
- *
- * Changes made in third pre-release:
- * ----------------------------------
- *	- be more conservative on timers
- *	- preliminary support for multicast (I still lack some details)
- *
- * Changes made in fourth pre-release:
- * -----------------------------------
- *	- multicast (revisited and finished)
- *	- avoid reset in set_multicast_list (a really big hack)
- *	  if somebody could apply this code for other i82586 based drivers
- *	- share onboard memory 75% RU and 25% CU (instead of 50/50)
- *
- * Changes made for release in 2.1.15:
- * -----------------------------------
- *	- change the detection code for multi manufacturer code support
- *
- * Changes made for release in 2.1.17:
- * -----------------------------------
- *	- update to wireless extensions changes
- *	- silly bug in card initial configuration (psa_conf_status)
- *
- * Changes made for release in 2.1.27 & 2.0.30:
- * --------------------------------------------
- *	- small bug in debug code (probably not the last one...)
- *	- remove extern keyword for wavelan_probe()
- *	- level threshold is now a standard wireless extension (version 4 !)
- *	- modules parameters types (new module interface)
- *
- * Changes made for release in 2.1.36:
- * -----------------------------------
- *	- byte count stats (courtesy of David Hinds)
- *	- remove dev_tint stuff (courtesy of David Hinds)
- *	- encryption setting from Brent Elphick (thanks a lot!)
- *	- 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
- *
- * Other changes (not by me) :
- * -------------------------
- *	- Spelling and gramar "rectification".
- *
- * Changes made for release in 2.0.37 & 2.2.2 :
- * ------------------------------------------
- *	- Correct status in /proc/net/wireless
- *	- Set PSA CRC to make PtP diagnostic tool happy (Bob Gray)
- *	- Module init code don't fail if we found at least one card in
- *	  the address list (Karlis Peisenieks)
- *	- Missing parenthesis (Christopher Peterson)
- *	- Correct i82586 configuration parameters
- *	- Encryption initialisation bug (Robert McCormack)
- *	- New mac addresses detected in the probe
- *	- Increase watchdog for busy environments
- *
- * Changes made for release in 2.0.38 & 2.2.7 :
- * ------------------------------------------
- *	- Correct the reception logic to better report errors and avoid
- *	  sending bogus packet up the stack
- *	- Delay RU config to avoid corrupting first received packet
- *	- Change config completion code (to actually check something)
- *	- Avoid reading out of bound in skbuf to transmit
- *	- Rectify a lot of (useless) debugging code
- *	- Change the way to `#ifdef SET_PSA_CRC'
- *
- * Changes made for release in 2.2.11 & 2.3.13 :
- * -------------------------------------------
- *	- Change e-mail and web page addresses
- *	- Watchdog timer is now correctly expressed in HZ, not in jiffies
- *	- Add channel number to the list of frequencies in range
- *	- Add the (short) list of bit-rates in range
- *	- Developp a new sensitivity... (sens.value & sens.fixed)
- *
- * Changes made for release in 2.2.14 & 2.3.23 :
- * -------------------------------------------
- *	- Fix check for root permission (break instead of exit)
- *	- New nwid & encoding setting (Wireless Extension 9)
- *
- * Changes made for release in 2.3.49 :
- * ----------------------------------
- *	- Indentation reformating (Alan)
- *	- Update to new network API (softnet - 2.3.43) :
- *		o replace dev->tbusy (Alan)
- *		o replace dev->tstart (Alan)
- *		o remove dev->interrupt (Alan)
- *		o add SMP locking via spinlock in splxx (me)
- *		o add spinlock in interrupt handler (me)
- *		o use kernel watchdog instead of ours (me)
- *		o increase watchdog timeout (kernel is more sensitive) (me)
- *		o verify that all the changes make sense and work (me)
- *	- Fixup a potential gotcha when reconfiguring and thighten a bit
- *		the interactions with Tx queue.
- *
- * Changes made for release in 2.4.0 :
- * ---------------------------------
- *	- Fix spinlock stupid bugs that I left in. The driver is now SMP
- *		compliant and doesn't lockup at startup.
- *
- * Changes made for release in 2.5.2 :
- * ---------------------------------
- *	- Use new driver API for Wireless Extensions :
- *		o got rid of wavelan_ioctl()
- *		o use a bunch of iw_handler instead
- *
- * Changes made for release in 2.5.35 :
- * ----------------------------------
- *	- Set dev->trans_start to avoid filling the logs
- *	- Handle better spurious/bogus interrupt
- *	- Avoid deadlocks in mmc_out()/mmc_in()
- *
- * Wishes & dreams:
- * ----------------
- *	- roaming (see Pcmcia driver)
- */
-
-/***************************** INCLUDES *****************************/
-
-#include	<linux/module.h>
-
-#include	<linux/kernel.h>
-#include	<linux/sched.h>
-#include	<linux/types.h>
-#include	<linux/fcntl.h>
-#include	<linux/interrupt.h>
-#include	<linux/stat.h>
-#include	<linux/ptrace.h>
-#include	<linux/ioport.h>
-#include	<linux/in.h>
-#include	<linux/string.h>
-#include	<linux/delay.h>
-#include	<linux/bitops.h>
-#include	<asm/system.h>
-#include	<asm/io.h>
-#include	<asm/dma.h>
-#include	<asm/uaccess.h>
-#include	<linux/errno.h>
-#include	<linux/netdevice.h>
-#include	<linux/etherdevice.h>
-#include	<linux/skbuff.h>
-#include	<linux/slab.h>
-#include	<linux/timer.h>
-#include	<linux/init.h>
-
-#include <linux/wireless.h>		/* Wireless extensions */
-#include <net/iw_handler.h>		/* Wireless handlers */
-
-/* WaveLAN declarations */
-#include	"i82586.h"
-#include	"wavelan.h"
-
-/************************** DRIVER OPTIONS **************************/
-/*
- * `#define' or `#undef' the following constant to change the behaviour
- * of the driver...
- */
-#undef SET_PSA_CRC		/* Calculate and set the CRC on PSA (slower) */
-#define USE_PSA_CONFIG		/* Use info from the PSA. */
-#undef EEPROM_IS_PROTECTED	/* doesn't seem to be necessary */
-#define MULTICAST_AVOID		/* Avoid extra multicast (I'm sceptical). */
-#undef SET_MAC_ADDRESS		/* Experimental */
-
-/* Warning:  this stuff will slow down the driver. */
-#define WIRELESS_SPY		/* Enable spying addresses. */
-#undef HISTOGRAM		/* Enable histogram of signal level. */
-
-/****************************** DEBUG ******************************/
-
-#undef DEBUG_MODULE_TRACE	/* module insertion/removal */
-#undef DEBUG_CALLBACK_TRACE	/* calls made by Linux */
-#undef DEBUG_INTERRUPT_TRACE	/* calls to handler */
-#undef DEBUG_INTERRUPT_INFO	/* type of interrupt and so on */
-#define DEBUG_INTERRUPT_ERROR	/* problems */
-#undef DEBUG_CONFIG_TRACE	/* Trace the config functions. */
-#undef DEBUG_CONFIG_INFO	/* what's going on */
-#define DEBUG_CONFIG_ERROR	/* errors on configuration */
-#undef DEBUG_TX_TRACE		/* transmission calls */
-#undef DEBUG_TX_INFO		/* header of the transmitted packet */
-#undef DEBUG_TX_FAIL		/* Normal failure conditions */
-#define DEBUG_TX_ERROR		/* Unexpected conditions */
-#undef DEBUG_RX_TRACE		/* transmission calls */
-#undef DEBUG_RX_INFO		/* header of the received packet */
-#undef DEBUG_RX_FAIL		/* Normal failure conditions */
-#define DEBUG_RX_ERROR		/* Unexpected conditions */
-
-#undef DEBUG_PACKET_DUMP	/* Dump packet on the screen if defined to 32. */
-#undef DEBUG_IOCTL_TRACE	/* misc. call by Linux */
-#undef DEBUG_IOCTL_INFO		/* various debugging info */
-#define DEBUG_IOCTL_ERROR	/* what's going wrong */
-#define DEBUG_BASIC_SHOW	/* Show basic startup info. */
-#undef DEBUG_VERSION_SHOW	/* Print version info. */
-#undef DEBUG_PSA_SHOW		/* Dump PSA to screen. */
-#undef DEBUG_MMC_SHOW		/* Dump mmc to screen. */
-#undef DEBUG_SHOW_UNUSED	/* Show unused fields too. */
-#undef DEBUG_I82586_SHOW	/* Show i82586 status. */
-#undef DEBUG_DEVICE_SHOW	/* Show device parameters. */
-
-/************************ CONSTANTS & MACROS ************************/
-
-#ifdef DEBUG_VERSION_SHOW
-static const char	*version	= "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n";
-#endif
-
-/* Watchdog temporisation */
-#define	WATCHDOG_JIFFIES	(512*HZ/100)
-
-/* ------------------------ PRIVATE IOCTL ------------------------ */
-
-#define SIOCSIPQTHR	SIOCIWFIRSTPRIV		/* Set quality threshold */
-#define SIOCGIPQTHR	SIOCIWFIRSTPRIV + 1	/* Get quality threshold */
-
-#define SIOCSIPHISTO	SIOCIWFIRSTPRIV + 2	/* Set histogram ranges */
-#define SIOCGIPHISTO	SIOCIWFIRSTPRIV + 3	/* Get histogram values */
-
-/****************************** TYPES ******************************/
-
-/* Shortcuts */
-typedef struct iw_statistics	iw_stats;
-typedef struct iw_quality	iw_qual;
-typedef struct iw_freq		iw_freq;typedef struct net_local	net_local;
-typedef struct timer_list	timer_list;
-
-/* Basic types */
-typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
-
-/*
- * Static specific data for the interface.
- *
- * For each network interface, Linux keeps data in two structures:  "device"
- * keeps the generic data (same format for everybody) and "net_local" keeps
- * additional specific data.
- */
-struct net_local
-{
-  net_local *	next;		/* linked list of the devices */
-  struct net_device *	dev;		/* reverse link */
-  spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
-  int		nresets;	/* number of hardware resets */
-  u_char	reconfig_82586;	/* We need to reconfigure the controller. */
-  u_char	promiscuous;	/* promiscuous mode */
-  int		mc_count;	/* number of multicast addresses */
-  u_short	hacr;		/* current host interface state */
-
-  int		tx_n_in_use;
-  u_short	rx_head;
-  u_short	rx_last;
-  u_short	tx_first_free;
-  u_short	tx_first_in_use;
-
-  iw_stats	wstats;		/* Wireless-specific statistics */
-
-  struct iw_spy_data	spy_data;
-  struct iw_public_data	wireless_data;
-
-#ifdef HISTOGRAM
-  int		his_number;		/* number of intervals */
-  u_char	his_range[16];		/* boundaries of interval ]n-1; n] */
-  u_long	his_sum[16];		/* sum in interval */
-#endif	/* HISTOGRAM */
-};
-
-/**************************** PROTOTYPES ****************************/
-
-/* ----------------------- MISC. SUBROUTINES ------------------------ */
-static u_char
-	wv_irq_to_psa(int);
-static int
-	wv_psa_to_irq(u_char);
-/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */
-static inline u_short		/* data */
-	hasr_read(u_long);	/* Read the host interface:  base address */
-static inline void
-	hacr_write(u_long,	/* Write to host interface:  base address */
-		   u_short),	/* data */
-	hacr_write_slow(u_long,
-		   u_short),
-	set_chan_attn(u_long,	/* ioaddr */
-		      u_short),	/* hacr   */
-	wv_hacr_reset(u_long),	/* ioaddr */
-	wv_16_off(u_long,	/* ioaddr */
-		  u_short),	/* hacr   */
-	wv_16_on(u_long,	/* ioaddr */
-		 u_short),	/* hacr   */
-	wv_ints_off(struct net_device *),
-	wv_ints_on(struct net_device *);
-/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
-static void
-	psa_read(u_long,	/* Read the Parameter Storage Area. */
-		 u_short,	/* hacr */
-		 int,		/* offset in PSA */
-		 u_char *,	/* buffer to fill */
-		 int),		/* size to read */
-	psa_write(u_long, 	/* Write to the PSA. */
-		  u_short,	/* hacr */
-		  int,		/* offset in PSA */
-		  u_char *,	/* buffer in memory */
-		  int);		/* length of buffer */
-static inline void
-	mmc_out(u_long,		/* Write 1 byte to the Modem Manag Control. */
-		u_short,
-		u_char),
-	mmc_write(u_long,	/* Write n bytes to the MMC. */
-		  u_char,
-		  u_char *,
-		  int);
-static inline u_char		/* Read 1 byte from the MMC. */
-	mmc_in(u_long,
-	       u_short);
-static inline void
-	mmc_read(u_long,	/* Read n bytes from the MMC. */
-		 u_char,
-		 u_char *,
-		 int),
-	fee_wait(u_long,	/* Wait for frequency EEPROM:  base address */
-		 int,		/* base delay to wait for */
-		 int);		/* time to wait */
-static void
-	fee_read(u_long,	/* Read the frequency EEPROM:  base address */
-		 u_short,	/* destination offset */
-		 u_short *,	/* data buffer */
-		 int);		/* number of registers */
-/* ---------------------- I82586 SUBROUTINES ----------------------- */
-static /*inline*/ void
-	obram_read(u_long,	/* ioaddr */
-		   u_short,	/* o */
-		   u_char *,	/* b */
-		   int);	/* n */
-static inline void
-	obram_write(u_long,	/* ioaddr */
-		    u_short,	/* o */
-		    u_char *,	/* b */
-		    int);	/* n */
-static void
-	wv_ack(struct net_device *);
-static inline int
-	wv_synchronous_cmd(struct net_device *,
-			   const char *),
-	wv_config_complete(struct net_device *,
-			   u_long,
-			   net_local *);
-static int
-	wv_complete(struct net_device *,
-		    u_long,
-		    net_local *);
-static inline void
-	wv_82586_reconfig(struct net_device *);
-/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
-#ifdef DEBUG_I82586_SHOW
-static void
-	wv_scb_show(unsigned short);
-#endif
-static inline void
-	wv_init_info(struct net_device *);	/* display startup info */
-/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
-static iw_stats *
-	wavelan_get_wireless_stats(struct net_device *);
-static void
-	wavelan_set_multicast_list(struct net_device *);
-/* ----------------------- PACKET RECEPTION ----------------------- */
-static inline void
-	wv_packet_read(struct net_device *,	/* Read a packet from a frame. */
-		       u_short,
-		       int),
-	wv_receive(struct net_device *);	/* Read all packets waiting. */
-/* --------------------- PACKET TRANSMISSION --------------------- */
-static inline int
-	wv_packet_write(struct net_device *,	/* Write a packet to the Tx buffer. */
-			void *,
-			short);
-static netdev_tx_t
-	wavelan_packet_xmit(struct sk_buff *,	/* Send a packet. */
-			    struct net_device *);
-/* -------------------- HARDWARE CONFIGURATION -------------------- */
-static inline int
-	wv_mmc_init(struct net_device *),	/* Initialize the modem. */
-	wv_ru_start(struct net_device *),	/* Start the i82586 receiver unit. */
-	wv_cu_start(struct net_device *),	/* Start the i82586 command unit. */
-	wv_82586_start(struct net_device *);	/* Start the i82586. */
-static void
-	wv_82586_config(struct net_device *);	/* Configure the i82586. */
-static inline void
-	wv_82586_stop(struct net_device *);
-static int
-	wv_hw_reset(struct net_device *),	/* Reset the WaveLAN hardware. */
-	wv_check_ioaddr(u_long,		/* ioaddr */
-			u_char *);	/* mac address (read) */
-/* ---------------------- INTERRUPT HANDLING ---------------------- */
-static irqreturn_t
-	wavelan_interrupt(int,		/* interrupt handler */
-			  void *);
-static void
-	wavelan_watchdog(struct net_device *);	/* transmission watchdog */
-/* ------------------- CONFIGURATION CALLBACKS ------------------- */
-static int
-	wavelan_open(struct net_device *),	/* Open the device. */
-	wavelan_close(struct net_device *),	/* Close the device. */
-	wavelan_config(struct net_device *, unsigned short);/* Configure one device. */
-extern struct net_device *wavelan_probe(int unit);	/* See Space.c. */
-
-/**************************** VARIABLES ****************************/
-
-/*
- * This is the root of the linked list of WaveLAN drivers
- * It is use to verify that we don't reuse the same base address
- * for two different drivers and to clean up when removing the module.
- */
-static net_local *	wavelan_list	= (net_local *) NULL;
-
-/*
- * This table is used to translate the PSA value to IRQ number
- * and vice versa.
- */
-static u_char	irqvals[]	=
-{
-	   0,    0,    0, 0x01,
-	0x02, 0x04,    0, 0x08,
-	   0,    0, 0x10, 0x20,
-	0x40,    0,    0, 0x80,
-};
-
-/*
- * Table of the available I/O addresses (base addresses) for WaveLAN
- */
-static unsigned short	iobase[]	=
-{
-#if	0
-  /* Leave out 0x3C0 for now -- seems to clash with some video
-   * controllers.
-   * Leave out the others too -- we will always use 0x390 and leave
-   * 0x300 for the Ethernet device.
-   * Jean II:  0x3E0 is fine as well.
-   */
-  0x300, 0x390, 0x3E0, 0x3C0
-#endif	/* 0 */
-  0x390, 0x3E0
-};
-
-#ifdef	MODULE
-/* Parameters set by insmod */
-static int	io[4];
-static int	irq[4];
-static char	*name[4];
-module_param_array(io, int, NULL, 0);
-module_param_array(irq, int, NULL, 0);
-module_param_array(name, charp, NULL, 0);
-
-MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required");
-MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)");
-MODULE_PARM_DESC(name, "WaveLAN interface neme(s)");
-#endif	/* MODULE */
-
-#endif	/* WAVELAN_P_H */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
deleted file mode 100644
index 431a20ec6db..00000000000
--- a/drivers/net/wireless/wavelan_cs.c
+++ /dev/null
@@ -1,4635 +0,0 @@
-/*
- *	Wavelan Pcmcia driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- * Original copyright follow. See wavelan_cs.p.h for details.
- *
- * This code is derived from Anthony D. Joseph's code and all the changes here
- * are also under the original copyright below.
- *
- * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
- * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
- *
- * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
- * critical code in the routine to initialize the Modem Management Controller.
- *
- * Thanks to Alan Cox and Bruce Janson for their advice.
- *
- *	-- Yunzhou Li (scip4166@nus.sg)
- *
-#ifdef WAVELAN_ROAMING	
- * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
- * based on patch by Joe Finney from Lancaster University.
-#endif
- *
- * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
- * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
- *
- *   A non-shared memory PCMCIA ethernet driver for linux
- *
- * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
- *
- *
- * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
- *
- * Apr 2 '98  made changes to bring the i82593 control/int handling in line
- *             with offical specs...
- *
- ****************************************************************************
- *   Copyright 1995
- *   Anthony D. Joseph
- *   Massachusetts Institute of Technology
- *
- *   Permission to use, copy, modify, and distribute this program
- *   for any purpose and without fee is hereby granted, provided
- *   that this copyright and permission notice appear on all copies
- *   and supporting documentation, the name of M.I.T. not be used
- *   in advertising or publicity pertaining to distribution of the
- *   program without specific prior permission, and notice be given
- *   in supporting documentation that copying and distribution is
- *   by permission of M.I.T.  M.I.T. makes no representations about
- *   the suitability of this software for any purpose.  It is pro-
- *   vided "as is" without express or implied warranty.         
- ****************************************************************************
- *
- */
-
-/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
-#include "wavelan_cs.p.h"		/* Private header */
-
-#ifdef WAVELAN_ROAMING
-static void wl_cell_expiry(unsigned long data);
-static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp);
-static void wv_nwid_filter(unsigned char mode, net_local *lp);
-#endif  /*  WAVELAN_ROAMING  */
-
-/************************* MISC SUBROUTINES **************************/
-/*
- * Subroutines which won't fit in one of the following category
- * (wavelan modem or i82593)
- */
-
-/******************* MODEM MANAGEMENT SUBROUTINES *******************/
-/*
- * Useful subroutines to manage the modem of the wavelan
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Read from card's Host Adaptor Status Register.
- */
-static inline u_char
-hasr_read(u_long	base)
-{
-  return(inb(HASR(base)));
-} /* hasr_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register.
- */
-static inline void
-hacr_write(u_long	base,
-	   u_char	hacr)
-{
-  outb(hacr, HACR(base));
-} /* hacr_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Write to card's Host Adapter Command Register. Include a delay for
- * those times when it is needed.
- */
-static void
-hacr_write_slow(u_long	base,
-		u_char	hacr)
-{
-  hacr_write(base, hacr);
-  /* delay might only be needed sometimes */
-  mdelay(1);
-} /* hacr_write_slow */
-
-/*------------------------------------------------------------------*/
-/*
- * Read the Parameter Storage Area from the WaveLAN card's memory
- */
-static void
-psa_read(struct net_device *	dev,
-	 int		o,	/* offset in PSA */
-	 u_char *	b,	/* buffer to fill */
-	 int		n)	/* size to read */
-{
-  net_local *lp = netdev_priv(dev);
-  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
-
-  while(n-- > 0)
-    {
-      *b++ = readb(ptr);
-      /* Due to a lack of address decode pins, the WaveLAN PCMCIA card
-       * only supports reading even memory addresses. That means the
-       * increment here MUST be two.
-       * Because of that, we can't use memcpy_fromio()...
-       */
-      ptr += 2;
-    }
-} /* psa_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Write the Parameter Storage Area to the WaveLAN card's memory
- */
-static void
-psa_write(struct net_device *	dev,
-	  int		o,	/* Offset in psa */
-	  u_char *	b,	/* Buffer in memory */
-	  int		n)	/* Length of buffer */
-{
-  net_local *lp = netdev_priv(dev);
-  u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
-  int		count = 0;
-  unsigned int	base = dev->base_addr;
-  /* As there seem to have no flag PSA_BUSY as in the ISA model, we are
-   * oblige to verify this address to know when the PSA is ready... */
-  volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
-    (psaoff(0, psa_comp_number) << 1);
-
-  /* Authorize writing to PSA */
-  hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
-
-  while(n-- > 0)
-    {
-      /* write to PSA */
-      writeb(*b++, ptr);
-      ptr += 2;
-
-      /* I don't have the spec, so I don't know what the correct
-       * sequence to write is. This hack seem to work for me... */
-      count = 0;
-      while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
-	mdelay(1);
-    }
-
-  /* Put the host interface back in standard state */
-  hacr_write(base, HACR_DEFAULT);
-} /* psa_write */
-
-#ifdef SET_PSA_CRC
-/*------------------------------------------------------------------*/
-/*
- * Calculate the PSA CRC
- * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
- * NOTE: By specifying a length including the CRC position the
- * returned value should be zero. (i.e. a correct checksum in the PSA)
- *
- * The Windows drivers don't use the CRC, but the AP and the PtP tool
- * depend on it.
- */
-static u_short
-psa_crc(unsigned char *	psa,	/* The PSA */
-	int		size)	/* Number of short for CRC */
-{
-  int		byte_cnt;	/* Loop on the PSA */
-  u_short	crc_bytes = 0;	/* Data in the PSA */
-  int		bit_cnt;	/* Loop on the bits of the short */
-
-  for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
-    {
-      crc_bytes ^= psa[byte_cnt];	/* Its an xor */
-
-      for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
-	{
-	  if(crc_bytes & 0x0001)
-	    crc_bytes = (crc_bytes >> 1) ^ 0xA001;
-	  else
-	    crc_bytes >>= 1 ;
-        }
-    }
-
-  return crc_bytes;
-} /* psa_crc */
-#endif	/* SET_PSA_CRC */
-
-/*------------------------------------------------------------------*/
-/*
- * update the checksum field in the Wavelan's PSA
- */
-static void
-update_psa_checksum(struct net_device *	dev)
-{
-#ifdef SET_PSA_CRC
-  psa_t		psa;
-  u_short	crc;
-
-  /* read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-  /* update the checksum */
-  crc = psa_crc((unsigned char *) &psa,
-		sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
-		- sizeof(psa.psa_crc_status));
-
-  psa.psa_crc[0] = crc & 0xFF;
-  psa.psa_crc[1] = (crc & 0xFF00) >> 8;
-
-  /* Write it ! */
-  psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
-	    (unsigned char *)&psa.psa_crc, 2);
-
-#ifdef DEBUG_IOCTL_INFO
-  printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
-          dev->name, psa.psa_crc[0], psa.psa_crc[1]);
-
-  /* Check again (luxury !) */
-  crc = psa_crc((unsigned char *) &psa,
-		 sizeof(psa) - sizeof(psa.psa_crc_status));
-
-  if(crc != 0)
-    printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
-#endif /* DEBUG_IOCTL_INFO */
-#endif	/* SET_PSA_CRC */
-} /* update_psa_checksum */
-
-/*------------------------------------------------------------------*/
-/*
- * Write 1 byte to the MMC.
- */
-static void
-mmc_out(u_long		base,
-	u_short		o,
-	u_char		d)
-{
-  int count = 0;
-
-  /* Wait for MMC to go idle */
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-
-  outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
-  outb(d, MMD(base));
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to write bytes to the Modem Management Controller.
- * We start by the end because it is the way it should be !
- */
-static void
-mmc_write(u_long	base,
-	  u_char	o,
-	  u_char *	b,
-	  int		n)
-{
-  o += n;
-  b += n;
-
-  while(n-- > 0 )
-    mmc_out(base, --o, *(--b));
-} /* mmc_write */
-
-/*------------------------------------------------------------------*/
-/*
- * Read 1 byte from the MMC.
- * Optimised version for 1 byte, avoid using memory...
- */
-static u_char
-mmc_in(u_long	base,
-       u_short	o)
-{
-  int count = 0;
-
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-  outb(o << 1, MMR(base));		/* Set the read address */
-
-  outb(0, MMD(base));			/* Required dummy write */
-
-  while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
-    udelay(10);
-  return (u_char) (inb(MMD(base)));	/* Now do the actual read */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to read bytes from the Modem Management Controller.
- * The implementation is complicated by a lack of address lines,
- * which prevents decoding of the low-order bit.
- * (code has just been moved in the above function)
- * We start by the end because it is the way it should be !
- */
-static void
-mmc_read(u_long		base,
-	 u_char		o,
-	 u_char *	b,
-	 int		n)
-{
-  o += n;
-  b += n;
-
-  while(n-- > 0)
-    *(--b) = mmc_in(base, --o);
-} /* mmc_read */
-
-/*------------------------------------------------------------------*/
-/*
- * Get the type of encryption available...
- */
-static inline int
-mmc_encr(u_long		base)	/* i/o port of the card */
-{
-  int	temp;
-
-  temp = mmc_in(base, mmroff(0, mmr_des_avail));
-  if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
-    return 0;
-  else
-    return temp;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wait for the frequency EEprom to complete a command...
- */
-static void
-fee_wait(u_long		base,	/* i/o port of the card */
-	 int		delay,	/* Base delay to wait for */
-	 int		number)	/* Number of time to wait */
-{
-  int		count = 0;	/* Wait only a limited time */
-
-  while((count++ < number) &&
-	(mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
-    udelay(delay);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Read bytes from the Frequency EEprom (frequency select cards).
- */
-static void
-fee_read(u_long		base,	/* i/o port of the card */
-	 u_short	o,	/* destination offset */
-	 u_short *	b,	/* data buffer */
-	 int		n)	/* number of registers */
-{
-  b += n;		/* Position at the end of the area */
-
-  /* Write the address */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-  /* Loop on all buffer */
-  while(n-- > 0)
-    {
-      /* Write the read command */
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);
-
-      /* Wait until EEprom is ready (should be quick !) */
-      fee_wait(base, 10, 100);
-
-      /* Read the value */
-      *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
-	      mmc_in(base, mmroff(0, mmr_fee_data_l)));
-    }
-}
-
-
-/*------------------------------------------------------------------*/
-/*
- * Write bytes from the Frequency EEprom (frequency select cards).
- * This is a bit complicated, because the frequency eeprom has to
- * be unprotected and the write enabled.
- * Jean II
- */
-static void
-fee_write(u_long	base,	/* i/o port of the card */
-	  u_short	o,	/* destination offset */
-	  u_short *	b,	/* data buffer */
-	  int		n)	/* number of registers */
-{
-  b += n;		/* Position at the end of the area */
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-  /* Ask to read the protected register */
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
-
-  fee_wait(base, 10, 100);
-
-  /* Read the protected register */
-  printk("Protected 2 : %02X-%02X\n",
-	 mmc_in(base, mmroff(0, mmr_fee_data_h)),
-	 mmc_in(base, mmroff(0, mmr_fee_data_l)));
-#endif	/* DOESNT_SEEM_TO_WORK */
-
-  /* Enable protected register */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
-
-  fee_wait(base, 10, 100);
-
-  /* Unprotect area */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-#ifdef DOESNT_SEEM_TO_WORK	/* disabled */
-  /* Or use : */
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
-#endif	/* DOESNT_SEEM_TO_WORK */
-
-  fee_wait(base, 10, 100);
-#endif	/* EEPROM_IS_PROTECTED */
-
-  /* Write enable */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
-
-  fee_wait(base, 10, 100);
-
-  /* Write the EEprom address */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
-
-  /* Loop on all buffer */
-  while(n-- > 0)
-    {
-      /* Write the value */
-      mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
-      mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
-
-      /* Write the write command */
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);
-
-      /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
-      mdelay(10);
-      fee_wait(base, 10, 100);
-    }
-
-  /* Write disable */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
-
-  fee_wait(base, 10, 100);
-
-#ifdef EEPROM_IS_PROTECTED	/* disabled */
-  /* Reprotect EEprom */
-  mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
-  mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
-
-  fee_wait(base, 10, 100);
-#endif	/* EEPROM_IS_PROTECTED */
-}
-
-/******************* WaveLAN Roaming routines... ********************/
-
-#ifdef WAVELAN_ROAMING	/* Conditional compile, see wavelan_cs.h */
-
-static unsigned char WAVELAN_BEACON_ADDRESS[] = {0x09,0x00,0x0e,0x20,0x03,0x00};
-  
-static void wv_roam_init(struct net_device *dev)
-{
-  net_local  *lp= netdev_priv(dev);
-
-  /* Do not remove this unless you have a good reason */
-  printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
-	 " device %s !\n", dev->name, dev->name);
-  printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
-	 " of the Wavelan driver.\n");
-  printk(KERN_NOTICE "It may work, but may also make the driver behave in"
-	 " erratic ways or crash.\n");
-
-  lp->wavepoint_table.head=NULL;           /* Initialise WavePoint table */
-  lp->wavepoint_table.num_wavepoints=0;
-  lp->wavepoint_table.locked=0;
-  lp->curr_point=NULL;                        /* No default WavePoint */
-  lp->cell_search=0;
-  
-  lp->cell_timer.data=(long)lp;               /* Start cell expiry timer */
-  lp->cell_timer.function=wl_cell_expiry;
-  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
-  add_timer(&lp->cell_timer);
-  
-  wv_nwid_filter(NWID_PROMISC,lp) ;    /* Enter NWID promiscuous mode */
-  /* to build up a good WavePoint */
-                                           /* table... */
-  printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
-}
- 
-static void wv_roam_cleanup(struct net_device *dev)
-{
-  wavepoint_history *ptr,*old_ptr;
-  net_local *lp= netdev_priv(dev);
-  
-  printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
-  
-  /* Fixme : maybe we should check that the timer exist before deleting it */
-  del_timer(&lp->cell_timer);          /* Remove cell expiry timer       */
-  ptr=lp->wavepoint_table.head;        /* Clear device's WavePoint table */
-  while(ptr!=NULL)
-    {
-      old_ptr=ptr;
-      ptr=ptr->next;	
-      wl_del_wavepoint(old_ptr,lp);	
-    }
-}
-
-/* Enable/Disable NWID promiscuous mode on a given device */
-static void wv_nwid_filter(unsigned char mode, net_local *lp)
-{
-  mm_t                  m;
-  unsigned long         flags;
-  
-#ifdef WAVELAN_ROAMING_DEBUG
-  printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
-#endif
-  
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-  
-  m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
-  mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
-  
-  if(mode==NWID_PROMISC)
-    lp->cell_search=1;
-  else
-    lp->cell_search=0;
-
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-}
-
-/* Find a record in the WavePoint table matching a given NWID */
-static wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
-{
-  wavepoint_history	*ptr=lp->wavepoint_table.head;
-  
-  while(ptr!=NULL){
-    if(ptr->nwid==nwid)
-      return ptr;	
-    ptr=ptr->next;
-  }
-  return NULL;
-}
-
-/* Create a new wavepoint table entry */
-static wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
-{
-  wavepoint_history *new_wavepoint;
-
-#ifdef WAVELAN_ROAMING_DEBUG	
-  printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
-#endif
-  
-  if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
-    return NULL;
-  
-  new_wavepoint = kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
-  if(new_wavepoint==NULL)
-    return NULL;
-  
-  new_wavepoint->nwid=nwid;                       /* New WavePoints NWID */
-  new_wavepoint->average_fast=0;                    /* Running Averages..*/
-  new_wavepoint->average_slow=0;
-  new_wavepoint->qualptr=0;                       /* Start of ringbuffer */
-  new_wavepoint->last_seq=seq-1;                /* Last sequence no.seen */
-  memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
-  
-  new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
-  new_wavepoint->prev=NULL;
-  
-  if(lp->wavepoint_table.head!=NULL)
-    lp->wavepoint_table.head->prev=new_wavepoint;
-  
-  lp->wavepoint_table.head=new_wavepoint;
-  
-  lp->wavepoint_table.num_wavepoints++;     /* no. of visible wavepoints */
-  
-  return new_wavepoint;
-}
-
-/* Remove a wavepoint entry from WavePoint table */
-static void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
-{
-  if(wavepoint==NULL)
-    return;
-  
-  if(lp->curr_point==wavepoint)
-    lp->curr_point=NULL;
-  
-  if(wavepoint->prev!=NULL)
-    wavepoint->prev->next=wavepoint->next;
-  
-  if(wavepoint->next!=NULL)
-    wavepoint->next->prev=wavepoint->prev;
-  
-  if(lp->wavepoint_table.head==wavepoint)
-    lp->wavepoint_table.head=wavepoint->next;
-  
-  lp->wavepoint_table.num_wavepoints--;
-  kfree(wavepoint);
-}
-
-/* Timer callback function - checks WavePoint table for stale entries */ 
-static void wl_cell_expiry(unsigned long data)
-{
-  net_local *lp=(net_local *)data;
-  wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
-  
-#if WAVELAN_ROAMING_DEBUG > 1
-  printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
-#endif
-  
-  if(lp->wavepoint_table.locked)
-    {
-#if WAVELAN_ROAMING_DEBUG > 1
-      printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
-#endif
-      
-      lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
-      add_timer(&lp->cell_timer);
-      return;
-    }
-  
-  while(wavepoint!=NULL)
-    {
-      if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
-	{
-#ifdef WAVELAN_ROAMING_DEBUG
-	  printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
-#endif
-	  
-	  old_point=wavepoint;
-	  wavepoint=wavepoint->next;
-	  wl_del_wavepoint(old_point,lp);
-	}
-      else
-	wavepoint=wavepoint->next;
-    }
-  lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
-  add_timer(&lp->cell_timer);
-}
-
-/* Update SNR history of a wavepoint */
-static void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)	
-{
-  int i=0,num_missed=0,ptr=0;
-  int average_fast=0,average_slow=0;
-  
-  num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
-							    any beacons? */
-  if(num_missed)
-    for(i=0;i<num_missed;i++)
-      {
-	wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
-	wavepoint->qualptr %=WAVEPOINT_HISTORY;    /* in the ringbuffer. */
-      }
-  wavepoint->last_seen=jiffies;                 /* Add beacon to history */
-  wavepoint->last_seq=seq;	
-  wavepoint->sigqual[wavepoint->qualptr++]=sigqual;          
-  wavepoint->qualptr %=WAVEPOINT_HISTORY;
-  ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
-  
-  for(i=0;i<WAVEPOINT_FAST_HISTORY;i++)       /* Update running averages */
-    {
-      average_fast+=wavepoint->sigqual[ptr++];
-      ptr %=WAVEPOINT_HISTORY;
-    }
-  
-  average_slow=average_fast;
-  for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
-    {
-      average_slow+=wavepoint->sigqual[ptr++];
-      ptr %=WAVEPOINT_HISTORY;
-    }
-  
-  wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
-  wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;	
-}
-
-/* Perform a handover to a new WavePoint */
-static void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
-{
-  unsigned int		base = lp->dev->base_addr;
-  mm_t                  m;
-  unsigned long         flags;
-
-  if(wavepoint==lp->curr_point)          /* Sanity check... */
-    {
-      wv_nwid_filter(!NWID_PROMISC,lp);
-      return;
-    }
-  
-#ifdef WAVELAN_ROAMING_DEBUG
-  printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
-#endif
- 	
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
-  m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
-  
-  mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
-  
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  wv_nwid_filter(!NWID_PROMISC,lp);
-  lp->curr_point=wavepoint;
-}
-
-/* Called when a WavePoint beacon is received */
-static void wl_roam_gather(struct net_device *  dev,
-			   u_char *  hdr,   /* Beacon header */
-			   u_char *  stats) /* SNR, Signal quality
-						      of packet */
-{
-  wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
-  unsigned short nwid=ntohs(beacon->nwid);  
-  unsigned short sigqual=stats[2] & MMR_SGNL_QUAL;   /* SNR of beacon */
-  wavepoint_history *wavepoint=NULL;                /* WavePoint table entry */
-  net_local *lp = netdev_priv(dev);              /* Device info */
-
-#ifdef I_NEED_THIS_FEATURE
-  /* Some people don't need this, some other may need it */
-  nwid=nwid^ntohs(beacon->domain_id);
-#endif
-
-#if WAVELAN_ROAMING_DEBUG > 1
-  printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
-  printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
-#endif
-  
-  lp->wavepoint_table.locked=1;                            /* <Mutex> */
-  
-  wavepoint=wl_roam_check(nwid,lp);            /* Find WavePoint table entry */
-  if(wavepoint==NULL)                    /* If no entry, Create a new one... */
-    {
-      wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
-      if(wavepoint==NULL)
-	goto out;
-    }
-  if(lp->curr_point==NULL)             /* If this is the only WavePoint, */
-    wv_roam_handover(wavepoint, lp);	         /* Jump on it! */
-  
-  wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
-							 stats. */
-  
-  if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
-    if(!lp->cell_search)                  /* WavePoint is getting faint, */
-      wv_nwid_filter(NWID_PROMISC,lp);    /* start looking for a new one */
-  
-  if(wavepoint->average_slow > 
-     lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
-    wv_roam_handover(wavepoint, lp);   /* Handover to a better WavePoint */
-  
-  if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
-    if(lp->cell_search)  /* getting better, drop out of cell search mode */
-      wv_nwid_filter(!NWID_PROMISC,lp);
-  
-out:
-  lp->wavepoint_table.locked=0;                        /* </MUTEX>   :-) */
-}
-
-/* Test this MAC frame a WavePoint beacon */
-static inline int WAVELAN_BEACON(unsigned char *data)
-{
-  wavepoint_beacon *beacon= (wavepoint_beacon *)data;
-  static const wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
-  
-  if(memcmp(beacon,&beacon_template,9)==0)
-    return 1;
-  else
-    return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-/************************ I82593 SUBROUTINES *************************/
-/*
- * Useful subroutines to manage the Ethernet controller
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to synchronously send a command to the i82593 chip. 
- * Should be called with interrupts disabled.
- * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
- *  wv_82593_config() & wv_diag())
- */
-static int
-wv_82593_cmd(struct net_device *	dev,
-	     char *	str,
-	     int	cmd,
-	     int	result)
-{
-  unsigned int	base = dev->base_addr;
-  int		status;
-  int		wait_completed;
-  long		spin;
-
-  /* Spin until the chip finishes executing its current command (if any) */
-  spin = 1000;
-  do
-    {
-      /* Time calibration of the loop */
-      udelay(10);
-
-      /* Read the interrupt register */
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
-
-  /* If the interrupt hasn't been posted */
-  if (spin < 0) {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  /* Issue the command to the controller */
-  outb(cmd, LCCR(base));
-
-  /* If we don't have to check the result of the command
-   * Note : this mean that the irq handler will deal with that */
-  if(result == SR0_NO_RESULT)
-    return(TRUE);
-
-  /* We are waiting for command completion */
-  wait_completed = TRUE;
-
-  /* Busy wait while the LAN controller executes the command. */
-  spin = 1000;
-  do
-    {
-      /* Time calibration of the loop */
-      udelay(10);
-
-      /* Read the interrupt register */
-      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
-      status = inb(LCSR(base));
-
-      /* Check if there was an interrupt posted */
-      if((status & SR0_INTERRUPT))
-	{
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-
-	  /* Check if interrupt is a command completion */
-	  if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
-	     ((status & SR0_BOTH_RX_TX) != 0x0) &&
-	     !(status & SR0_RECEPTION))
-	    {
-	      /* Signal command completion */
-	      wait_completed = FALSE;
-	    }
-	  else
-	    {
-	      /* Note : Rx interrupts will be handled later, because we can
-	       * handle multiple Rx packets at once */
-#ifdef DEBUG_INTERRUPT_INFO
-	      printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
-#endif
-	    }
-	}
-    }
-  while(wait_completed && (spin-- > 0));
-
-  /* If the interrupt hasn't be posted */
-  if(wait_completed)
-    {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  /* Check the return code returned by the card (see above) against
-   * the expected return code provided by the caller */
-  if((status & SR0_EVENT_MASK) != result)
-    {
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
-	     str, status);
-#endif
-      return(FALSE);
-    }
-
-  return(TRUE);
-} /* wv_82593_cmd */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a 593 op-code number 7, and obtains the diagnose
- * status for the WaveLAN.
- */
-static inline int
-wv_diag(struct net_device *	dev)
-{
-  return(wv_82593_cmd(dev, "wv_diag(): diagnose",
-		      OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED));
-} /* wv_diag */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to read len bytes from the i82593's ring buffer, starting at
- * chip address addr. The results read from the chip are stored in buf.
- * The return value is the address to use for next the call.
- */
-static int
-read_ringbuf(struct net_device *	dev,
-	     int	addr,
-	     char *	buf,
-	     int	len)
-{
-  unsigned int	base = dev->base_addr;
-  int		ring_ptr = addr;
-  int		chunk_len;
-  char *	buf_ptr = buf;
-
-  /* Get all the buffer */
-  while(len > 0)
-    {
-      /* Position the Program I/O Register at the ring buffer pointer */
-      outb(ring_ptr & 0xff, PIORL(base));
-      outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));
-
-      /* First, determine how much we can read without wrapping around the
-	 ring buffer */
-      if((addr + len) < (RX_BASE + RX_SIZE))
-	chunk_len = len;
-      else
-	chunk_len = RX_BASE + RX_SIZE - addr;
-      insb(PIOP(base), buf_ptr, chunk_len);
-      buf_ptr += chunk_len;
-      len -= chunk_len;
-      ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
-    }
-  return(ring_ptr);
-} /* read_ringbuf */
-
-/*------------------------------------------------------------------*/
-/*
- * Reconfigure the i82593, or at least ask for it...
- * Because wv_82593_config use the transmission buffer, we must do it
- * when we are sure that there is no transmission, so we do it now
- * or in wavelan_packet_xmit() (I can't find any better place,
- * wavelan_interrupt is not an option...), so you may experience
- * some delay sometime...
- */
-static void
-wv_82593_reconfig(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  struct pcmcia_device *		link = lp->link;
-  unsigned long		flags;
-
-  /* Arm the flag, will be cleard in wv_82593_config() */
-  lp->reconfig_82593 = TRUE;
-
-  /* Check if we can do it now ! */
-  if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
-    {
-      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
-      wv_82593_config(dev);
-      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
-    }
-  else
-    {
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG
-	     "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
-	     dev->name, dev->state, link->open);
-#endif
-    }
-}
-
-/********************* DEBUG & INFO SUBROUTINES *********************/
-/*
- * This routines are used in the code to show debug informations.
- * Most of the time, it dump the content of hardware structures...
- */
-
-#ifdef DEBUG_PSA_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted contents of the Parameter Storage Area.
- */
-static void
-wv_psa_show(psa_t *	p)
-{
-  printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
-  printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
-	 p->psa_io_base_addr_1,
-	 p->psa_io_base_addr_2,
-	 p->psa_io_base_addr_3,
-	 p->psa_io_base_addr_4);
-  printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
-	 p->psa_rem_boot_addr_1,
-	 p->psa_rem_boot_addr_2,
-	 p->psa_rem_boot_addr_3);
-  printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
-  printk("psa_int_req_no: %d\n", p->psa_int_req_no);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "psa_unused0[]: %pM\n", p->psa_unused0);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "psa_univ_mac_addr[]: %pM\n", p->psa_univ_mac_addr);
-  printk(KERN_DEBUG "psa_local_mac_addr[]: %pM\n", p->psa_local_mac_addr);
-  printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
-  printk("psa_comp_number: %d, ", p->psa_comp_number);
-  printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
-  printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
-	 p->psa_feature_select);
-  printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
-  printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
-  printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
-  printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
-  printk("psa_nwid_select: %d\n", p->psa_nwid_select);
-  printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
-  printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
-	 p->psa_encryption_key[0],
-	 p->psa_encryption_key[1],
-	 p->psa_encryption_key[2],
-	 p->psa_encryption_key[3],
-	 p->psa_encryption_key[4],
-	 p->psa_encryption_key[5],
-	 p->psa_encryption_key[6],
-	 p->psa_encryption_key[7]);
-  printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
-  printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
-	 p->psa_call_code[0]);
-  printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	 p->psa_call_code[0],
-	 p->psa_call_code[1],
-	 p->psa_call_code[2],
-	 p->psa_call_code[3],
-	 p->psa_call_code[4],
-	 p->psa_call_code[5],
-	 p->psa_call_code[6],
-	 p->psa_call_code[7]);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "psa_reserved[]: %02X:%02X\n",
-	 p->psa_reserved[0],
-	 p->psa_reserved[1]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
-  printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
-  printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
-} /* wv_psa_show */
-#endif	/* DEBUG_PSA_SHOW */
-
-#ifdef DEBUG_MMC_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the Modem Management Controller.
- * This function need to be completed...
- */
-static void
-wv_mmc_show(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  mmr_t		m;
-
-  /* Basic check */
-  if(hasr_read(base) & HASR_NO_CLK)
-    {
-      printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
-	     dev->name);
-      return;
-    }
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Read the mmc */
-  mmc_out(base, mmwoff(0, mmw_freeze), 1);
-  mmc_read(base, 0, (u_char *)&m, sizeof(m));
-  mmc_out(base, mmwoff(0, mmw_freeze), 0);
-
-  /* Don't forget to update statistics */
-  lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
-	 m.mmr_unused0[0],
-	 m.mmr_unused0[1],
-	 m.mmr_unused0[2],
-	 m.mmr_unused0[3],
-	 m.mmr_unused0[4],
-	 m.mmr_unused0[5],
-	 m.mmr_unused0[6],
-	 m.mmr_unused0[7]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
-	 m.mmr_des_avail, m.mmr_des_status);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
-	 m.mmr_unused1[0],
-	 m.mmr_unused1[1],
-	 m.mmr_unused1[2],
-	 m.mmr_unused1[3],
-	 m.mmr_unused1[4]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
-	 m.mmr_dce_status,
-	 (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
-	 "loop test indicated," : "",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
-	 (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
-	 "jabber timer expired," : "");
-  printk(KERN_DEBUG "Dsp ID: %02X\n",
-	 m.mmr_dsp_id);
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
-	 m.mmr_unused2[0],
-	 m.mmr_unused2[1]);
-#endif	/* DEBUG_SHOW_UNUSED */
-  printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
-	 (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
-	 (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
-  printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
-	 m.mmr_thr_pre_set & MMR_THR_PRE_SET,
-	 (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
-  printk(KERN_DEBUG "signal_lvl: %d [%s], ",
-	 m.mmr_signal_lvl & MMR_SIGNAL_LVL,
-	 (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
-  printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
-	 (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
-  printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
-	 (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
-#ifdef DEBUG_SHOW_UNUSED
-  printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
-#endif	/* DEBUG_SHOW_UNUSED */
-} /* wv_mmc_show */
-#endif	/* DEBUG_MMC_SHOW */
-
-#ifdef DEBUG_I82593_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the i82593's receive unit.
- */
-static void
-wv_ru_show(struct net_device *	dev)
-{
-  net_local *lp = netdev_priv(dev);
-
-  printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
-  printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
-  /*
-   * Not implemented yet...
-   */
-  printk("\n");
-} /* wv_ru_show */
-#endif	/* DEBUG_I82593_SHOW */
-
-#ifdef DEBUG_DEVICE_SHOW
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver.
- */
-static void
-wv_dev_show(struct net_device *	dev)
-{
-  printk(KERN_DEBUG "dev:");
-  printk(" state=%lX,", dev->state);
-  printk(" trans_start=%ld,", dev->trans_start);
-  printk(" flags=0x%x,", dev->flags);
-  printk("\n");
-} /* wv_dev_show */
-
-/*------------------------------------------------------------------*/
-/*
- * Print the formatted status of the WaveLAN PCMCIA device driver's
- * private information.
- */
-static void
-wv_local_show(struct net_device *	dev)
-{
-  net_local *lp = netdev_priv(dev);
-
-  printk(KERN_DEBUG "local:");
-  /*
-   * Not implemented yet...
-   */
-  printk("\n");
-} /* wv_local_show */
-#endif	/* DEBUG_DEVICE_SHOW */
-
-#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
-/*------------------------------------------------------------------*/
-/*
- * Dump packet header (and content if necessary) on the screen
- */
-static void
-wv_packet_info(u_char *		p,		/* Packet to dump */
-	       int		length,		/* Length of the packet */
-	       char *		msg1,		/* Name of the device */
-	       char *		msg2)		/* Name of the function */
-{
-  int		i;
-  int		maxi;
-
-  printk(KERN_DEBUG "%s: %s(): dest %pM, length %d\n",
-	 msg1, msg2, p, length);
-  printk(KERN_DEBUG "%s: %s(): src %pM, type 0x%02X%02X\n",
-	 msg1, msg2, &p[6], p[12], p[13]);
-
-#ifdef DEBUG_PACKET_DUMP
-
-  printk(KERN_DEBUG "data=\"");
-
-  if((maxi = length) > DEBUG_PACKET_DUMP)
-    maxi = DEBUG_PACKET_DUMP;
-  for(i = 14; i < maxi; i++)
-    if(p[i] >= ' ' && p[i] <= '~')
-      printk(" %c", p[i]);
-    else
-      printk("%02X", p[i]);
-  if(maxi < length)
-    printk("..");
-  printk("\"\n");
-  printk(KERN_DEBUG "\n");
-#endif	/* DEBUG_PACKET_DUMP */
-}
-#endif	/* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
-
-/*------------------------------------------------------------------*/
-/*
- * This is the information which is displayed by the driver at startup
- * There  is a lot of flag to configure it at your will...
- */
-static void
-wv_init_info(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  psa_t		psa;
-
-  /* Read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-#ifdef DEBUG_PSA_SHOW
-  wv_psa_show(&psa);
-#endif
-#ifdef DEBUG_MMC_SHOW
-  wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82593_SHOW
-  wv_ru_show(dev);
-#endif
-
-#ifdef DEBUG_BASIC_SHOW
-  /* Now, let's go for the basic stuff */
-  printk(KERN_NOTICE "%s: WaveLAN: port %#x, irq %d, hw_addr %pM",
-	 dev->name, base, dev->irq, dev->dev_addr);
-
-  /* Print current network id */
-  if(psa.psa_nwid_select)
-    printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
-  else
-    printk(", nwid off");
-
-  /* If 2.00 card */
-  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-    {
-      unsigned short	freq;
-
-      /* Ask the EEprom to read the frequency from the first area */
-      fee_read(base, 0x00 /* 1st area - frequency... */,
-	       &freq, 1);
-
-      /* Print frequency */
-      printk(", 2.00, %ld", (freq >> 6) + 2400L);
-
-      /* Hack !!! */
-      if(freq & 0x20)
-	printk(".5");
-    }
-  else
-    {
-      printk(", PCMCIA, ");
-      switch (psa.psa_subband)
-	{
-	case PSA_SUBBAND_915:
-	  printk("915");
-	  break;
-	case PSA_SUBBAND_2425:
-	  printk("2425");
-	  break;
-	case PSA_SUBBAND_2460:
-	  printk("2460");
-	  break;
-	case PSA_SUBBAND_2484:
-	  printk("2484");
-	  break;
-	case PSA_SUBBAND_2430_5:
-	  printk("2430.5");
-	  break;
-	default:
-	  printk("unknown");
-	}
-    }
-
-  printk(" MHz\n");
-#endif	/* DEBUG_BASIC_SHOW */
-
-#ifdef DEBUG_VERSION_SHOW
-  /* Print version information */
-  printk(KERN_NOTICE "%s", version);
-#endif
-} /* wv_init_info */
-
-/********************* IOCTL, STATS & RECONFIG *********************/
-/*
- * We found here routines that are called by Linux on differents
- * occasions after the configuration and not for transmitting data
- * These may be called when the user use ifconfig, /proc/net/dev
- * or wireless extensions
- */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Set or clear the multicast filter for this adaptor.
- * num_addrs == -1	Promiscuous mode, receive all packets
- * num_addrs == 0	Normal mode, clear multicast list
- * num_addrs > 0	Multicast mode, receive normal and MC packets,
- *			and do best-effort filtering.
- */
-
-static void
-wavelan_set_multicast_list(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
-#endif
-
-#ifdef DEBUG_IOCTL_INFO
-  printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
-	 dev->name, dev->flags, dev->mc_count);
-#endif
-
-  if(dev->flags & IFF_PROMISC)
-    {
-      /*
-       * Enable promiscuous mode: receive all packets.
-       */
-      if(!lp->promiscuous)
-	{
-	  lp->promiscuous = 1;
-	  lp->allmulticast = 0;
-	  lp->mc_count = 0;
-
-	  wv_82593_reconfig(dev);
-	}
-    }
-  else
-    /* If all multicast addresses
-     * or too much multicast addresses for the hardware filter */
-    if((dev->flags & IFF_ALLMULTI) ||
-       (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
-      {
-	/*
-	 * Disable promiscuous mode, but active the all multicast mode
-	 */
-	if(!lp->allmulticast)
-	  {
-	    lp->promiscuous = 0;
-	    lp->allmulticast = 1;
-	    lp->mc_count = 0;
-
-	    wv_82593_reconfig(dev);
-	  }
-      }
-    else
-      /* If there is some multicast addresses to send */
-      if(dev->mc_list != (struct dev_mc_list *) NULL)
-	{
-	  /*
-	   * Disable promiscuous mode, but receive all packets
-	   * in multicast list
-	   */
-#ifdef MULTICAST_AVOID
-	  if(lp->promiscuous || lp->allmulticast ||
-	     (dev->mc_count != lp->mc_count))
-#endif
-	    {
-	      lp->promiscuous = 0;
-	      lp->allmulticast = 0;
-	      lp->mc_count = dev->mc_count;
-
-	      wv_82593_reconfig(dev);
-	    }
-	}
-      else
-	{
-	  /*
-	   * Switch to normal mode: disable promiscuous mode and 
-	   * clear the multicast list.
-	   */
-	  if(lp->promiscuous || lp->mc_count == 0)
-	    {
-	      lp->promiscuous = 0;
-	      lp->allmulticast = 0;
-	      lp->mc_count = 0;
-
-	      wv_82593_reconfig(dev);
-	    }
-	}
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This function doesn't exist...
- * (Note : it was a nice way to test the reconfigure stuff...)
- */
-#ifdef SET_MAC_ADDRESS
-static int
-wavelan_set_mac_address(struct net_device *	dev,
-			void *		addr)
-{
-  struct sockaddr *	mac = addr;
-
-  /* Copy the address */
-  memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
-
-  /* Reconfig the beast */
-  wv_82593_reconfig(dev);
-
-  return 0;
-}
-#endif	/* SET_MAC_ADDRESS */
-
-
-/*------------------------------------------------------------------*/
-/*
- * Frequency setting (for hardware able of it)
- * It's a bit complicated and you don't really want to look into it...
- */
-static int
-wv_set_frequency(u_long		base,	/* i/o port of the card */
-		 iw_freq *	frequency)
-{
-  const int	BAND_NUM = 10;	/* Number of bands */
-  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz */
-#ifdef DEBUG_IOCTL_INFO
-  int		i;
-#endif
-
-  /* Setting by frequency */
-  /* Theoritically, you may set any frequency between
-   * the two limits with a 0.5 MHz precision. In practice,
-   * I don't want you to have trouble with local
-   * regulations... */
-  if((frequency->e == 1) &&
-     (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
-    {
-      freq = ((frequency->m / 10000) - 24000L) / 5;
-    }
-
-  /* Setting by channel (same as wfreqsel) */
-  /* Warning : each channel is 22MHz wide, so some of the channels
-   * will interfere... */
-  if((frequency->e == 0) &&
-     (frequency->m >= 0) && (frequency->m < BAND_NUM))
-    {
-      /* Get frequency offset. */
-      freq = channel_bands[frequency->m] >> 1;
-    }
-
-  /* Verify if the frequency is allowed */
-  if(freq != 0L)
-    {
-      u_short	table[10];	/* Authorized frequency table */
-
-      /* Read the frequency table */
-      fee_read(base, 0x71 /* frequency table */,
-	       table, 10);
-
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG "Frequency table :");
-      for(i = 0; i < 10; i++)
-	{
-	  printk(" %04X",
-		 table[i]);
-	}
-      printk("\n");
-#endif
-
-      /* Look in the table if the frequency is allowed */
-      if(!(table[9 - ((freq - 24) / 16)] &
-	   (1 << ((freq - 24) % 16))))
-	return -EINVAL;		/* not allowed */
-    }
-  else
-    return -EINVAL;
-
-  /* If we get a usable frequency */
-  if(freq != 0L)
-    {
-      unsigned short	area[16];
-      unsigned short	dac[2];
-      unsigned short	area_verify[16];
-      unsigned short	dac_verify[2];
-      /* Corresponding gain (in the power adjust value table)
-       * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
-       * & WCIN062D.DOC, page 6.2.9 */
-      unsigned short	power_limit[] = { 40, 80, 120, 160, 0 };
-      int		power_band = 0;		/* Selected band */
-      unsigned short	power_adjust;		/* Correct value */
-
-      /* Search for the gain */
-      power_band = 0;
-      while((freq > power_limit[power_band]) &&
-	    (power_limit[++power_band] != 0))
-	;
-
-      /* Read the first area */
-      fee_read(base, 0x00,
-	       area, 16);
-
-      /* Read the DAC */
-      fee_read(base, 0x60,
-	       dac, 2);
-
-      /* Read the new power adjust value */
-      fee_read(base, 0x6B - (power_band >> 1),
-	       &power_adjust, 1);
-      if(power_band & 0x1)
-	power_adjust >>= 8;
-      else
-	power_adjust &= 0xFF;
-
-#ifdef DEBUG_IOCTL_INFO
-      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
-      for(i = 0; i < 16; i++)
-	{
-	  printk(" %04X",
-		 area[i]);
-	}
-      printk("\n");
-
-      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
-	     dac[0], dac[1]);
-#endif
-
-      /* Frequency offset (for info only...) */
-      area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
-
-      /* Receiver Principle main divider coefficient */
-      area[3] = (freq >> 1) + 2400L - 352L;
-      area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-      /* Transmitter Main divider coefficient */
-      area[13] = (freq >> 1) + 2400L;
-      area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
-
-      /* Others part of the area are flags, bit streams or unused... */
-
-      /* Set the value in the DAC */
-      dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
-      dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
-
-      /* Write the first area */
-      fee_write(base, 0x00,
-		area, 16);
-
-      /* Write the DAC */
-      fee_write(base, 0x60,
-		dac, 2);
-
-      /* We now should verify here that the EEprom writing was ok */
-
-      /* ReRead the first area */
-      fee_read(base, 0x00,
-	       area_verify, 16);
-
-      /* ReRead the DAC */
-      fee_read(base, 0x60,
-	       dac_verify, 2);
-
-      /* Compare */
-      if(memcmp(area, area_verify, 16 * 2) ||
-	 memcmp(dac, dac_verify, 2 * 2))
-	{
-#ifdef DEBUG_IOCTL_ERROR
-	  printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
-#endif
-	  return -EOPNOTSUPP;
-	}
-
-      /* We must download the frequency parameters to the
-       * synthetisers (from the EEprom - area 1)
-       * Note : as the EEprom is auto decremented, we set the end
-       * if the area... */
-      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
-	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-      /* We must now download the power adjust value (gain) to
-       * the synthetisers (from the EEprom - area 7 - DAC) */
-      mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
-      mmc_out(base, mmwoff(0, mmw_fee_ctrl),
-	      MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-#ifdef DEBUG_IOCTL_INFO
-      /* Verification of what we have done... */
-
-      printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
-      for(i = 0; i < 16; i++)
-	{
-	  printk(" %04X",
-		 area_verify[i]);
-	}
-      printk("\n");
-
-      printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
-	     dac_verify[0], dac_verify[1]);
-#endif
-
-      return 0;
-    }
-  else
-    return -EINVAL;		/* Bah, never get there... */
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Give the list of available frequencies
- */
-static int
-wv_frequency_list(u_long	base,	/* i/o port of the card */
-		  iw_freq *	list,	/* List of frequency to fill */
-		  int		max)	/* Maximum number of frequencies */
-{
-  u_short	table[10];	/* Authorized frequency table */
-  long		freq = 0L;	/* offset to 2.4 GHz in .5 MHz + 12 MHz */
-  int		i;		/* index in the table */
-  const int	BAND_NUM = 10;	/* Number of bands */
-  int		c = 0;		/* Channel number */
-
-  /* Read the frequency table */
-  fee_read(base, 0x71 /* frequency table */,
-	   table, 10);
-
-  /* Look all frequencies */
-  i = 0;
-  for(freq = 0; freq < 150; freq++)
-    /* Look in the table if the frequency is allowed */
-    if(table[9 - (freq / 16)] & (1 << (freq % 16)))
-      {
-	/* Compute approximate channel number */
-	while((((channel_bands[c] >> 1) - 24) < freq) &&
-	      (c < BAND_NUM))
-	  c++;
-	list[i].i = c;	/* Set the list index */
-
-	/* put in the list */
-	list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
-	list[i++].e = 1;
-
-	/* Check number */
-	if(i >= max)
-	  return(i);
-      }
-
-  return(i);
-}
-
-#ifdef IW_WIRELESS_SPY
-/*------------------------------------------------------------------*/
-/*
- * Gather wireless spy statistics : for each packet, compare the source
- * address with out list, and if match, get the stats...
- * Sorry, but this function really need wireless extensions...
- */
-static inline void
-wl_spy_gather(struct net_device *	dev,
-	      u_char *	mac,		/* MAC address */
-	      u_char *	stats)		/* Statistics to gather */
-{
-  struct iw_quality wstats;
-
-  wstats.qual = stats[2] & MMR_SGNL_QUAL;
-  wstats.level = stats[0] & MMR_SIGNAL_LVL;
-  wstats.noise = stats[1] & MMR_SILENCE_LVL;
-  wstats.updated = 0x7;
-
-  /* Update spy records */
-  wireless_spy_update(dev, mac, &wstats);
-}
-#endif	/* IW_WIRELESS_SPY */
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * This function calculate an histogram on the signal level.
- * As the noise is quite constant, it's like doing it on the SNR.
- * We have defined a set of interval (lp->his_range), and each time
- * the level goes in that interval, we increment the count (lp->his_sum).
- * With this histogram you may detect if one wavelan is really weak,
- * or you may also calculate the mean and standard deviation of the level...
- */
-static inline void
-wl_his_gather(struct net_device *	dev,
-	      u_char *	stats)		/* Statistics to gather */
-{
-  net_local *	lp = netdev_priv(dev);
-  u_char	level = stats[0] & MMR_SIGNAL_LVL;
-  int		i;
-
-  /* Find the correct interval */
-  i = 0;
-  while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
-    ;
-
-  /* Increment interval counter */
-  (lp->his_sum[i])++;
-}
-#endif	/* HISTOGRAM */
-
-static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
-{
-	strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
-}
-
-static const struct ethtool_ops ops = {
-	.get_drvinfo = wl_get_drvinfo
-};
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get protocol name
- */
-static int wavelan_get_name(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	strcpy(wrqu->name, "WaveLAN");
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set NWID
- */
-static int wavelan_set_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	mm_t m;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set NWID in WaveLAN. */
-	if (!wrqu->nwid.disabled) {
-		/* Set NWID in psa */
-		psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
-		psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
-		psa.psa_nwid_select = 0x01;
-		psa_write(dev,
-			  (char *) psa.psa_nwid - (char *) &psa,
-			  (unsigned char *) psa.psa_nwid, 3);
-
-		/* Set NWID in mmc. */
-		m.w.mmw_netw_id_l = psa.psa_nwid[1];
-		m.w.mmw_netw_id_h = psa.psa_nwid[0];
-		mmc_write(base,
-			  (char *) &m.w.mmw_netw_id_l -
-			  (char *) &m,
-			  (unsigned char *) &m.w.mmw_netw_id_l, 2);
-		mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
-	} else {
-		/* Disable NWID in the psa. */
-		psa.psa_nwid_select = 0x00;
-		psa_write(dev,
-			  (char *) &psa.psa_nwid_select -
-			  (char *) &psa,
-			  (unsigned char *) &psa.psa_nwid_select,
-			  1);
-
-		/* Disable NWID in the mmc (no filtering). */
-		mmc_out(base, mmwoff(0, mmw_loopt_sel),
-			MMW_LOOPT_SEL_DIS_NWID);
-	}
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get NWID 
- */
-static int wavelan_get_nwid(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the NWID. */
-	psa_read(dev,
-		 (char *) psa.psa_nwid - (char *) &psa,
-		 (unsigned char *) psa.psa_nwid, 3);
-	wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
-	wrqu->nwid.disabled = !(psa.psa_nwid_select);
-	wrqu->nwid.fixed = 1;	/* Superfluous */
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set frequency
- */
-static int wavelan_set_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-		ret = wv_set_frequency(base, &(wrqu->freq));
-	else
-		ret = -EOPNOTSUPP;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get frequency
- */
-static int wavelan_get_freq(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
-	 * Does it work for everybody, especially old cards? */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		unsigned short freq;
-
-		/* Ask the EEPROM to read the frequency from the first area. */
-		fee_read(base, 0x00, &freq, 1);
-		wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
-		wrqu->freq.e = 1;
-	} else {
-		psa_read(dev,
-			 (char *) &psa.psa_subband - (char *) &psa,
-			 (unsigned char *) &psa.psa_subband, 1);
-
-		if (psa.psa_subband <= 4) {
-			wrqu->freq.m = fixed_bands[psa.psa_subband];
-			wrqu->freq.e = (psa.psa_subband != 0);
-		} else
-			ret = -EOPNOTSUPP;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set level threshold
- */
-static int wavelan_set_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Set the level threshold. */
-	/* We should complain loudly if wrqu->sens.fixed = 0, because we
-	 * can't set auto mode... */
-	psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
-	psa_write(dev,
-		  (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		  (unsigned char *) &psa.psa_thr_pre_set, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-	mmc_out(base, mmwoff(0, mmw_thr_pre_set),
-		psa.psa_thr_pre_set);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get level threshold
- */
-static int wavelan_get_sens(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Read the level threshold. */
-	psa_read(dev,
-		 (char *) &psa.psa_thr_pre_set - (char *) &psa,
-		 (unsigned char *) &psa.psa_thr_pre_set, 1);
-	wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
-	wrqu->sens.fixed = 1;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set encryption key
- */
-static int wavelan_set_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	psa_t psa;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check if capable of encryption */
-	if (!mmc_encr(base)) {
-		ret = -EOPNOTSUPP;
-	}
-
-	/* Check the size of the key */
-	if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
-		ret = -EINVAL;
-	}
-
-	if(!ret) {
-		/* Basic checking... */
-		if (wrqu->encoding.length == 8) {
-			/* Copy the key in the driver */
-			memcpy(psa.psa_encryption_key, extra,
-			       wrqu->encoding.length);
-			psa.psa_encryption_select = 1;
-
-			psa_write(dev,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 8 + 1);
-
-			mmc_out(base, mmwoff(0, mmw_encr_enable),
-				MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
-			mmc_write(base, mmwoff(0, mmw_encr_key),
-				  (unsigned char *) &psa.
-				  psa_encryption_key, 8);
-		}
-
-		/* disable encryption */
-		if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
-			psa.psa_encryption_select = 0;
-			psa_write(dev,
-				  (char *) &psa.psa_encryption_select -
-				  (char *) &psa,
-				  (unsigned char *) &psa.
-				  psa_encryption_select, 1);
-
-			mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
-		}
-		/* update the Wavelan checksum */
-		update_psa_checksum(dev);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get encryption key
- */
-static int wavelan_get_encode(struct net_device *dev,
-			      struct iw_request_info *info,
-			      union iwreq_data *wrqu,
-			      char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Check if encryption is available */
-	if (!mmc_encr(base)) {
-		ret = -EOPNOTSUPP;
-	} else {
-		/* Read the encryption key */
-		psa_read(dev,
-			 (char *) &psa.psa_encryption_select -
-			 (char *) &psa,
-			 (unsigned char *) &psa.
-			 psa_encryption_select, 1 + 8);
-
-		/* encryption is enabled ? */
-		if (psa.psa_encryption_select)
-			wrqu->encoding.flags = IW_ENCODE_ENABLED;
-		else
-			wrqu->encoding.flags = IW_ENCODE_DISABLED;
-		wrqu->encoding.flags |= mmc_encr(base);
-
-		/* Copy the key to the user buffer */
-		wrqu->encoding.length = 8;
-		memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-#ifdef WAVELAN_ROAMING_EXT
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set ESSID (domain)
- */
-static int wavelan_set_essid(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Check if disable */
-	if(wrqu->data.flags == 0)
-		lp->filter_domains = 0;
-	else {
-		char	essid[IW_ESSID_MAX_SIZE + 1];
-		char *	endp;
-
-		/* Terminate the string */
-		memcpy(essid, extra, wrqu->data.length);
-		essid[IW_ESSID_MAX_SIZE] = '\0';
-
-#ifdef DEBUG_IOCTL_INFO
-		printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
-#endif	/* DEBUG_IOCTL_INFO */
-
-		/* Convert to a number (note : Wavelan specific) */
-		lp->domain_id = simple_strtoul(essid, &endp, 16);
-		/* Has it worked  ? */
-		if(endp > essid)
-			lp->filter_domains = 1;
-		else {
-			lp->filter_domains = 0;
-			ret = -EINVAL;
-		}
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get ESSID (domain)
- */
-static int wavelan_get_essid(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Is the domain ID active ? */
-	wrqu->data.flags = lp->filter_domains;
-
-	/* Copy Domain ID into a string (Wavelan specific) */
-	/* Sound crazy, be we can't have a snprintf in the kernel !!! */
-	sprintf(extra, "%lX", lp->domain_id);
-	extra[IW_ESSID_MAX_SIZE] = '\0';
-
-	/* Set the length */
-	wrqu->data.length = strlen(extra);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set AP address
- */
-static int wavelan_set_wap(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-#ifdef DEBUG_IOCTL_INFO
-	printk(KERN_DEBUG "Set AP to : %pM\n", wrqu->ap_addr.sa_data);
-#endif	/* DEBUG_IOCTL_INFO */
-
-	return -EOPNOTSUPP;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get AP address
- */
-static int wavelan_get_wap(struct net_device *dev,
-			   struct iw_request_info *info,
-			   union iwreq_data *wrqu,
-			   char *extra)
-{
-	/* Should get the real McCoy instead of own Ethernet address */
-	memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
-	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
-
-	return -EOPNOTSUPP;
-}
-#endif	/* WAVELAN_ROAMING_EXT */
-
-#ifdef WAVELAN_ROAMING
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : set mode
- */
-static int wavelan_set_mode(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-	int ret = 0;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-
-	/* Check mode */
-	switch(wrqu->mode) {
-	case IW_MODE_ADHOC:
-		if(do_roaming) {
-			wv_roam_cleanup(dev);
-			do_roaming = 0;
-		}
-		break;
-	case IW_MODE_INFRA:
-		if(!do_roaming) {
-			wv_roam_init(dev);
-			do_roaming = 1;
-		}
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get mode
- */
-static int wavelan_get_mode(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	if(do_roaming)
-		wrqu->mode = IW_MODE_INFRA;
-	else
-		wrqu->mode = IW_MODE_ADHOC;
-
-	return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Handler : get range info
- */
-static int wavelan_get_range(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	struct iw_range *range = (struct iw_range *) extra;
-	unsigned long flags;
-	int ret = 0;
-
-	/* Set the length (very important for backward compatibility) */
-	wrqu->data.length = sizeof(struct iw_range);
-
-	/* Set all the info we don't care or don't know about to zero */
-	memset(range, 0, sizeof(struct iw_range));
-
-	/* Set the Wireless Extension versions */
-	range->we_version_compiled = WIRELESS_EXT;
-	range->we_version_source = 9;
-
-	/* Set information in the range struct.  */
-	range->throughput = 1.4 * 1000 * 1000;	/* don't argue on this ! */
-	range->min_nwid = 0x0000;
-	range->max_nwid = 0xFFFF;
-
-	range->sensitivity = 0x3F;
-	range->max_qual.qual = MMR_SGNL_QUAL;
-	range->max_qual.level = MMR_SIGNAL_LVL;
-	range->max_qual.noise = MMR_SILENCE_LVL;
-	range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
-	/* Need to get better values for those two */
-	range->avg_qual.level = 30;
-	range->avg_qual.noise = 8;
-
-	range->num_bitrates = 1;
-	range->bitrate[0] = 2000000;	/* 2 Mb/s */
-
-	/* Event capability (kernel + driver) */
-	range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
-				IW_EVENT_CAPA_MASK(0x8B04) |
-				IW_EVENT_CAPA_MASK(0x8B06));
-	range->event_capa[1] = IW_EVENT_CAPA_K_1;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
-	if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-	      (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
-		range->num_channels = 10;
-		range->num_frequency = wv_frequency_list(base, range->freq,
-							IW_MAX_FREQUENCIES);
-	} else
-		range->num_channels = range->num_frequency = 0;
-
-	/* Encryption supported ? */
-	if (mmc_encr(base)) {
-		range->encoding_size[0] = 8;	/* DES = 64 bits key */
-		range->num_encoding_sizes = 1;
-		range->max_encoding_tokens = 1;	/* Only one key possible */
-	} else {
-		range->num_encoding_sizes = 0;
-		range->max_encoding_tokens = 0;
-	}
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return ret;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set quality threshold
- */
-static int wavelan_set_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	unsigned int base = dev->base_addr;
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa.psa_quality_thr = *(extra) & 0x0F;
-	psa_write(dev,
-		  (char *) &psa.psa_quality_thr - (char *) &psa,
-		  (unsigned char *) &psa.psa_quality_thr, 1);
-	/* update the Wavelan checksum */
-	update_psa_checksum(dev);
-	mmc_out(base, mmwoff(0, mmw_quality_thr),
-		psa.psa_quality_thr);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get quality threshold
- */
-static int wavelan_get_qthr(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	psa_t psa;
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	psa_read(dev,
-		 (char *) &psa.psa_quality_thr - (char *) &psa,
-		 (unsigned char *) &psa.psa_quality_thr, 1);
-	*(extra) = psa.psa_quality_thr & 0x0F;
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-#ifdef WAVELAN_ROAMING
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set roaming
- */
-static int wavelan_set_roam(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-	unsigned long flags;
-
-	/* Disable interrupts and save flags. */
-	spin_lock_irqsave(&lp->spinlock, flags);
-	
-	/* Note : should check if user == root */
-	if(do_roaming && (*extra)==0)
-		wv_roam_cleanup(dev);
-	else if(do_roaming==0 && (*extra)!=0)
-		wv_roam_init(dev);
-
-	do_roaming = (*extra);
-
-	/* Enable interrupts and restore flags. */
-	spin_unlock_irqrestore(&lp->spinlock, flags);
-
-	return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get quality threshold
- */
-static int wavelan_get_roam(struct net_device *dev,
-			    struct iw_request_info *info,
-			    union iwreq_data *wrqu,
-			    char *extra)
-{
-	*(extra) = do_roaming;
-
-	return 0;
-}
-#endif	/* WAVELAN_ROAMING */
-
-#ifdef HISTOGRAM
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : set histogram
- */
-static int wavelan_set_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Check the number of intervals. */
-	if (wrqu->data.length > 16) {
-		return(-E2BIG);
-	}
-
-	/* Disable histo while we copy the addresses.
-	 * As we don't disable interrupts, we need to do this */
-	lp->his_number = 0;
-
-	/* Are there ranges to copy? */
-	if (wrqu->data.length > 0) {
-		/* Copy interval ranges to the driver */
-		memcpy(lp->his_range, extra, wrqu->data.length);
-
-		{
-		  int i;
-		  printk(KERN_DEBUG "Histo :");
-		  for(i = 0; i < wrqu->data.length; i++)
-		    printk(" %d", lp->his_range[i]);
-		  printk("\n");
-		}
-
-		/* Reset result structure. */
-		memset(lp->his_sum, 0x00, sizeof(long) * 16);
-	}
-
-	/* Now we can set the number of ranges */
-	lp->his_number = wrqu->data.length;
-
-	return(0);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Wireless Private Handler : get histogram
- */
-static int wavelan_get_histo(struct net_device *dev,
-			     struct iw_request_info *info,
-			     union iwreq_data *wrqu,
-			     char *extra)
-{
-	net_local *lp = netdev_priv(dev);
-
-	/* Set the number of intervals. */
-	wrqu->data.length = lp->his_number;
-
-	/* Give back the distribution statistics */
-	if(lp->his_number > 0)
-		memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
-
-	return(0);
-}
-#endif			/* HISTOGRAM */
-
-/*------------------------------------------------------------------*/
-/*
- * Structures to export the Wireless Handlers
- */
-
-static const struct iw_priv_args wavelan_private_args[] = {
-/*{ cmd,         set_args,                            get_args, name } */
-  { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
-  { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
-  { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
-  { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
-  { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16,                    0, "sethisto" },
-  { SIOCGIPHISTO, 0,                     IW_PRIV_TYPE_INT | 16, "gethisto" },
-};
-
-static const iw_handler		wavelan_handler[] =
-{
-	NULL,				/* SIOCSIWNAME */
-	wavelan_get_name,		/* SIOCGIWNAME */
-	wavelan_set_nwid,		/* SIOCSIWNWID */
-	wavelan_get_nwid,		/* SIOCGIWNWID */
-	wavelan_set_freq,		/* SIOCSIWFREQ */
-	wavelan_get_freq,		/* SIOCGIWFREQ */
-#ifdef WAVELAN_ROAMING
-	wavelan_set_mode,		/* SIOCSIWMODE */
-	wavelan_get_mode,		/* SIOCGIWMODE */
-#else	/* WAVELAN_ROAMING */
-	NULL,				/* SIOCSIWMODE */
-	NULL,				/* SIOCGIWMODE */
-#endif	/* WAVELAN_ROAMING */
-	wavelan_set_sens,		/* SIOCSIWSENS */
-	wavelan_get_sens,		/* SIOCGIWSENS */
-	NULL,				/* SIOCSIWRANGE */
-	wavelan_get_range,		/* SIOCGIWRANGE */
-	NULL,				/* SIOCSIWPRIV */
-	NULL,				/* SIOCGIWPRIV */
-	NULL,				/* SIOCSIWSTATS */
-	NULL,				/* SIOCGIWSTATS */
-	iw_handler_set_spy,		/* SIOCSIWSPY */
-	iw_handler_get_spy,		/* SIOCGIWSPY */
-	iw_handler_set_thrspy,		/* SIOCSIWTHRSPY */
-	iw_handler_get_thrspy,		/* SIOCGIWTHRSPY */
-#ifdef WAVELAN_ROAMING_EXT
-	wavelan_set_wap,		/* SIOCSIWAP */
-	wavelan_get_wap,		/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	wavelan_set_essid,		/* SIOCSIWESSID */
-	wavelan_get_essid,		/* SIOCGIWESSID */
-#else	/* WAVELAN_ROAMING_EXT */
-	NULL,				/* SIOCSIWAP */
-	NULL,				/* SIOCGIWAP */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCGIWAPLIST */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWESSID */
-	NULL,				/* SIOCGIWESSID */
-#endif	/* WAVELAN_ROAMING_EXT */
-	NULL,				/* SIOCSIWNICKN */
-	NULL,				/* SIOCGIWNICKN */
-	NULL,				/* -- hole -- */
-	NULL,				/* -- hole -- */
-	NULL,				/* SIOCSIWRATE */
-	NULL,				/* SIOCGIWRATE */
-	NULL,				/* SIOCSIWRTS */
-	NULL,				/* SIOCGIWRTS */
-	NULL,				/* SIOCSIWFRAG */
-	NULL,				/* SIOCGIWFRAG */
-	NULL,				/* SIOCSIWTXPOW */
-	NULL,				/* SIOCGIWTXPOW */
-	NULL,				/* SIOCSIWRETRY */
-	NULL,				/* SIOCGIWRETRY */
-	wavelan_set_encode,		/* SIOCSIWENCODE */
-	wavelan_get_encode,		/* SIOCGIWENCODE */
-};
-
-static const iw_handler		wavelan_private_handler[] =
-{
-	wavelan_set_qthr,		/* SIOCIWFIRSTPRIV */
-	wavelan_get_qthr,		/* SIOCIWFIRSTPRIV + 1 */
-#ifdef WAVELAN_ROAMING
-	wavelan_set_roam,		/* SIOCIWFIRSTPRIV + 2 */
-	wavelan_get_roam,		/* SIOCIWFIRSTPRIV + 3 */
-#else	/* WAVELAN_ROAMING */
-	NULL,				/* SIOCIWFIRSTPRIV + 2 */
-	NULL,				/* SIOCIWFIRSTPRIV + 3 */
-#endif	/* WAVELAN_ROAMING */
-#ifdef HISTOGRAM
-	wavelan_set_histo,		/* SIOCIWFIRSTPRIV + 4 */
-	wavelan_get_histo,		/* SIOCIWFIRSTPRIV + 5 */
-#endif	/* HISTOGRAM */
-};
-
-static const struct iw_handler_def	wavelan_handler_def =
-{
-	.num_standard	= ARRAY_SIZE(wavelan_handler),
-	.num_private	= ARRAY_SIZE(wavelan_private_handler),
-	.num_private_args = ARRAY_SIZE(wavelan_private_args),
-	.standard	= wavelan_handler,
-	.private	= wavelan_private_handler,
-	.private_args	= wavelan_private_args,
-	.get_wireless_stats = wavelan_get_wireless_stats,
-};
-
-/*------------------------------------------------------------------*/
-/*
- * Get wireless statistics
- * Called by /proc/net/wireless...
- */
-static iw_stats *
-wavelan_get_wireless_stats(struct net_device *	dev)
-{
-  unsigned int		base = dev->base_addr;
-  net_local *		lp = netdev_priv(dev);
-  mmr_t			m;
-  iw_stats *		wstats;
-  unsigned long		flags;
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
-#endif
-
-  /* Disable interrupts & save flags */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  wstats = &lp->wstats;
-
-  /* Get data from the mmc */
-  mmc_out(base, mmwoff(0, mmw_freeze), 1);
-
-  mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
-  mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
-  mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);
-
-  mmc_out(base, mmwoff(0, mmw_freeze), 0);
-
-  /* Copy data to wireless stuff */
-  wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
-  wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
-  wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
-  wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
-  wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
-			  ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
-			  ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
-  wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
-  wstats->discard.code = 0L;
-  wstats->discard.misc = 0L;
-
-  /* ReEnable interrupts & restore flags */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_IOCTL_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
-#endif
-  return &lp->wstats;
-}
-
-/************************* PACKET RECEPTION *************************/
-/*
- * This part deal with receiving the packets.
- * The interrupt handler get an interrupt when a packet has been
- * successfully received and called this part...
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Calculate the starting address of the frame pointed to by the receive
- * frame pointer and verify that the frame seem correct
- * (called by wv_packet_rcv())
- */
-static int
-wv_start_of_frame(struct net_device *	dev,
-		  int		rfp,	/* end of frame */
-		  int		wrap)	/* start of buffer */
-{
-  unsigned int	base = dev->base_addr;
-  int		rp;
-  int		len;
-
-  rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
-  outb(rp & 0xff, PIORL(base));
-  outb(((rp >> 8) & PIORH_MASK), PIORH(base));
-  len = inb(PIOP(base));
-  len |= inb(PIOP(base)) << 8;
-
-  /* Sanity checks on size */
-  /* Frame too big */
-  if(len > MAXDATAZ + 100)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
-	     dev->name, rfp, len);
-#endif
-      return(-1);
-    }
-  
-  /* Frame too short */
-  if(len < 7)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
-	     dev->name, rfp, len);
-#endif
-      return(-1);
-    }
-  
-  /* Wrap around buffer */
-  if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE))	/* magic formula ! */
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
-	     dev->name, wrap, rfp, len);
-#endif
-      return(-1);
-    }
-
-  return((rp - len + RX_SIZE) % RX_SIZE);
-} /* wv_start_of_frame */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does the actual copy of data (including the ethernet
- * header structure) from the WaveLAN card to an sk_buff chain that
- * will be passed up to the network interface layer. NOTE: We
- * currently don't handle trailer protocols (neither does the rest of
- * the network interface), so if that is needed, it will (at least in
- * part) be added here.  The contents of the receive ring buffer are
- * copied to a message chain that is then passed to the kernel.
- *
- * Note: if any errors occur, the packet is "dropped on the floor"
- * (called by wv_packet_rcv())
- */
-static void
-wv_packet_read(struct net_device *		dev,
-	       int		fd_p,
-	       int		sksize)
-{
-  net_local *		lp = netdev_priv(dev);
-  struct sk_buff *	skb;
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
-	 dev->name, fd_p, sksize);
-#endif
-
-  /* Allocate some buffer for the new packet */
-  if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
-    {
-#ifdef DEBUG_RX_ERROR
-      printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
-	     dev->name, sksize);
-#endif
-      dev->stats.rx_dropped++;
-      /*
-       * Not only do we want to return here, but we also need to drop the
-       * packet on the floor to clear the interrupt.
-       */
-      return;
-    }
-
-  skb_reserve(skb, 2);
-  fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
-  skb->protocol = eth_type_trans(skb, dev);
-
-#ifdef DEBUG_RX_INFO
-  wv_packet_info(skb_mac_header(skb), sksize, dev->name, "wv_packet_read");
-#endif	/* DEBUG_RX_INFO */
-     
-  /* Statistics gathering & stuff associated.
-   * It seem a bit messy with all the define, but it's really simple... */
-  if(
-#ifdef IW_WIRELESS_SPY
-     (lp->spy_data.spy_number > 0) ||
-#endif	/* IW_WIRELESS_SPY */
-#ifdef HISTOGRAM
-     (lp->his_number > 0) ||
-#endif	/* HISTOGRAM */
-#ifdef WAVELAN_ROAMING
-     (do_roaming) ||
-#endif	/* WAVELAN_ROAMING */
-     0)
-    {
-      u_char	stats[3];	/* Signal level, Noise level, Signal quality */
-
-      /* read signal level, silence level and signal quality bytes */
-      fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
-			  stats, 3);
-#ifdef DEBUG_RX_INFO
-      printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
-	     dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
-#endif
-
-#ifdef WAVELAN_ROAMING
-      if(do_roaming)
-	if(WAVELAN_BEACON(skb->data))
-	  wl_roam_gather(dev, skb->data, stats);
-#endif	/* WAVELAN_ROAMING */
-	  
-#ifdef WIRELESS_SPY
-      wl_spy_gather(dev, skb_mac_header(skb) + WAVELAN_ADDR_SIZE, stats);
-#endif	/* WIRELESS_SPY */
-#ifdef HISTOGRAM
-      wl_his_gather(dev, stats);
-#endif	/* HISTOGRAM */
-    }
-
-  /*
-   * Hand the packet to the Network Module
-   */
-  netif_rx(skb);
-
-  /* Keep stats up to date */
-  dev->stats.rx_packets++;
-  dev->stats.rx_bytes += sksize;
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
-#endif
-  return;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine is called by the interrupt handler to initiate a
- * packet transfer from the card to the network interface layer above
- * this driver.  This routine checks if a buffer has been successfully
- * received by the WaveLAN card.  If so, the routine wv_packet_read is
- * called to do the actual transfer of the card's data including the
- * ethernet header into a packet consisting of an sk_buff chain.
- * (called by wavelan_interrupt())
- * Note : the spinlock is already grabbed for us and irq are disabled.
- */
-static void
-wv_packet_rcv(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  int		newrfp;
-  int		rp;
-  int		len;
-  int		f_start;
-  int		status;
-  int		i593_rfp;
-  int		stat_ptr;
-  u_char	c[4];
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
-#endif
-
-  /* Get the new receive frame pointer from the i82593 chip */
-  outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
-  i593_rfp = inb(LCSR(base));
-  i593_rfp |= inb(LCSR(base)) << 8;
-  i593_rfp %= RX_SIZE;
-
-  /* Get the new receive frame pointer from the WaveLAN card.
-   * It is 3 bytes more than the increment of the i82593 receive
-   * frame pointer, for each packet. This is because it includes the
-   * 3 roaming bytes added by the mmc.
-   */
-  newrfp = inb(RPLL(base));
-  newrfp |= inb(RPLH(base)) << 8;
-  newrfp %= RX_SIZE;
-
-#ifdef DEBUG_RX_INFO
-  printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-	 dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-
-#ifdef DEBUG_RX_ERROR
-  /* If no new frame pointer... */
-  if(lp->overrunning || newrfp == lp->rfp)
-    printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-	   dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-
-  /* Read all frames (packets) received */
-  while(newrfp != lp->rfp)
-    {
-      /* A frame is composed of the packet, followed by a status word,
-       * the length of the frame (word) and the mmc info (SNR & qual).
-       * It's because the length is at the end that we can only scan
-       * frames backward. */
-
-      /* Find the first frame by skipping backwards over the frames */
-      rp = newrfp;	/* End of last frame */
-      while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
-	    (f_start != -1))
-	  rp = f_start;
-
-      /* If we had a problem */
-      if(f_start == -1)
-	{
-#ifdef DEBUG_RX_ERROR
-	  printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
-	  printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
-		 i593_rfp, lp->stop, newrfp, lp->rfp);
-#endif
-	  lp->rfp = rp;		/* Get to the last usable frame */
-	  continue;
-	}
-
-      /* f_start point to the beggining of the first frame received
-       * and rp to the beggining of the next one */
-
-      /* Read status & length of the frame */
-      stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
-      stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
-      status = c[0] | (c[1] << 8);
-      len = c[2] | (c[3] << 8);
-
-      /* Check status */
-      if((status & RX_RCV_OK) != RX_RCV_OK)
-	{
-	  dev->stats.rx_errors++;
-	  if(status & RX_NO_SFD)
-	    dev->stats.rx_frame_errors++;
-	  if(status & RX_CRC_ERR)
-	    dev->stats.rx_crc_errors++;
-	  if(status & RX_OVRRUN)
-	    dev->stats.rx_over_errors++;
-
-#ifdef DEBUG_RX_FAIL
-	  printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
-		 dev->name, status);
-#endif
-	}
-      else
-	/* Read the packet and transmit to Linux */
-	wv_packet_read(dev, f_start, len - 2);
-
-      /* One frame has been processed, skip it */
-      lp->rfp = rp;
-    }
-
-  /*
-   * Update the frame stop register, but set it to less than
-   * the full 8K to allow space for 3 bytes of signal strength
-   * per packet.
-   */
-  lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
-  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
-  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
-  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
-
-#ifdef DEBUG_RX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
-#endif
-}
-
-/*********************** PACKET TRANSMISSION ***********************/
-/*
- * This part deal with sending packet through the wavelan
- * We copy the packet to the send buffer and then issue the send
- * command to the i82593. The result of this operation will be
- * checked in wavelan_interrupt()
- */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine fills in the appropriate registers and memory
- * locations on the WaveLAN card and starts the card off on
- * the transmit.
- * (called in wavelan_packet_xmit())
- */
-static void
-wv_packet_write(struct net_device *	dev,
-		void *		buf,
-		short		length)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			clen = length;
-  register u_short	xmtdata_base = TX_BASE;
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Write the length of data buffer followed by the buffer */
-  outb(xmtdata_base & 0xff, PIORL(base));
-  outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(clen & 0xff, PIOP(base));	/* lsb */
-  outb(clen >> 8, PIOP(base));  	/* msb */
-
-  /* Send the data */
-  outsb(PIOP(base), buf, clen);
-
-  /* Indicate end of transmit chain */
-  outb(OP0_NOP, PIOP(base));
-  /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
-  outb(OP0_NOP, PIOP(base));
-
-  /* Reset the transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  /* Send the transmit command */
-  wv_82593_cmd(dev, "wv_packet_write(): transmit",
-	       OP0_TRANSMIT, SR0_NO_RESULT);
-
-  /* Make sure the watchdog will keep quiet for a while */
-  dev->trans_start = jiffies;
-
-  /* Keep stats up to date */
-  dev->stats.tx_bytes += length;
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_TX_INFO
-  wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
-#endif	/* DEBUG_TX_INFO */
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine is called when we want to send a packet (NET3 callback)
- * In this routine, we check if the harware is ready to accept
- * the packet. We also prevent reentrance. Then, we call the function
- * to send the packet...
- */
-static netdev_tx_t
-wavelan_packet_xmit(struct sk_buff *	skb,
-		    struct net_device *		dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned long		flags;
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
-	 (unsigned) skb);
-#endif
-
-  /*
-   * Block a timer-based transmit from overlapping a previous transmit.
-   * In other words, prevent reentering this routine.
-   */
-  netif_stop_queue(dev);
-
-  /* If somebody has asked to reconfigure the controller,
-   * we can do it now */
-  if(lp->reconfig_82593)
-    {
-      spin_lock_irqsave(&lp->spinlock, flags);	/* Disable interrupts */
-      wv_82593_config(dev);
-      spin_unlock_irqrestore(&lp->spinlock, flags);	/* Re-enable interrupts */
-      /* Note : the configure procedure was totally synchronous,
-       * so the Tx buffer is now free */
-    }
-
-	/* Check if we need some padding */
-	/* Note : on wireless the propagation time is in the order of 1us,
-	 * and we don't have the Ethernet specific requirement of beeing
-	 * able to detect collisions, therefore in theory we don't really
-	 * need to pad. Jean II */
-	if (skb_padto(skb, ETH_ZLEN))
-		return NETDEV_TX_OK;
-
-  wv_packet_write(dev, skb->data, skb->len);
-
-  dev_kfree_skb(skb);
-
-#ifdef DEBUG_TX_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
-#endif
-  return NETDEV_TX_OK;
-}
-
-/********************** HARDWARE CONFIGURATION **********************/
-/*
- * This part do the real job of starting and configuring the hardware.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to initialize the Modem Management Controller.
- * (called by wv_hw_config())
- */
-static int
-wv_mmc_init(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  psa_t		psa;
-  mmw_t		m;
-  int		configured;
-  int		i;		/* Loop counter */
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
-#endif
-
-  /* Read the parameter storage area */
-  psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-
-  /*
-   * Check the first three octets of the MAC addr for the manufacturer's code.
-   * Note: If you get the error message below, you've got a
-   * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
-   * how to configure your card...
-   */
-  for (i = 0; i < ARRAY_SIZE(MAC_ADDRESSES); i++)
-    if ((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
-        (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
-        (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
-      break;
-
-  /* If we have not found it... */
-  if (i == ARRAY_SIZE(MAC_ADDRESSES))
-    {
-#ifdef DEBUG_CONFIG_ERRORS
-      printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
-	     dev->name, psa.psa_univ_mac_addr[0],
-	     psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
-#endif
-      return FALSE;
-    }
-
-  /* Get the MAC address */
-  memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);
-
-#ifdef USE_PSA_CONFIG
-  configured = psa.psa_conf_status & 1;
-#else
-  configured = 0;
-#endif
-
-  /* Is the PSA is not configured */
-  if(!configured)
-    {
-      /* User will be able to configure NWID after (with iwconfig) */
-      psa.psa_nwid[0] = 0;
-      psa.psa_nwid[1] = 0;
-
-      /* As NWID is not set : no NWID checking */
-      psa.psa_nwid_select = 0;
-
-      /* Disable encryption */
-      psa.psa_encryption_select = 0;
-
-      /* Set to standard values
-       * 0x04 for AT,
-       * 0x01 for MCA,
-       * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
-       */
-      if (psa.psa_comp_number & 1)
-	psa.psa_thr_pre_set = 0x01;
-      else
-	psa.psa_thr_pre_set = 0x04;
-      psa.psa_quality_thr = 0x03;
-
-      /* It is configured */
-      psa.psa_conf_status |= 1;
-
-#ifdef USE_PSA_CONFIG
-      /* Write the psa */
-      psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
-		(unsigned char *)psa.psa_nwid, 4);
-      psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
-		(unsigned char *)&psa.psa_thr_pre_set, 1);
-      psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
-		(unsigned char *)&psa.psa_quality_thr, 1);
-      psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
-		(unsigned char *)&psa.psa_conf_status, 1);
-      /* update the Wavelan checksum */
-      update_psa_checksum(dev);
-#endif	/* USE_PSA_CONFIG */
-    }
-
-  /* Zero the mmc structure */
-  memset(&m, 0x00, sizeof(m));
-
-  /* Copy PSA info to the mmc */
-  m.mmw_netw_id_l = psa.psa_nwid[1];
-  m.mmw_netw_id_h = psa.psa_nwid[0];
-  
-  if(psa.psa_nwid_select & 1)
-    m.mmw_loopt_sel = 0x00;
-  else
-    m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
-
-  memcpy(&m.mmw_encr_key, &psa.psa_encryption_key, 
-	 sizeof(m.mmw_encr_key));
-
-  if(psa.psa_encryption_select)
-    m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
-  else
-    m.mmw_encr_enable = 0;
-
-  m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
-  m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
-
-  /*
-   * Set default modem control parameters.
-   * See NCR document 407-0024326 Rev. A.
-   */
-  m.mmw_jabber_enable = 0x01;
-  m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
-  m.mmw_ifs = 0x20;
-  m.mmw_mod_delay = 0x04;
-  m.mmw_jam_time = 0x38;
-
-  m.mmw_des_io_invert = 0;
-  m.mmw_freeze = 0;
-  m.mmw_decay_prm = 0;
-  m.mmw_decay_updat_prm = 0;
-
-  /* Write all info to mmc */
-  mmc_write(base, 0, (u_char *)&m, sizeof(m));
-
-  /* The following code start the modem of the 2.00 frequency
-   * selectable cards at power on. It's not strictly needed for the
-   * following boots...
-   * The original patch was by Joe Finney for the PCMCIA driver, but
-   * I've cleaned it a bit and add documentation.
-   * Thanks to Loeke Brederveld from Lucent for the info.
-   */
-
-  /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
-   * (does it work for everybody ? - especially old cards...) */
-  /* Note : WFREQSEL verify that it is able to read from EEprom
-   * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
-   * is 0xA (Xilinx version) or 0xB (Ariadne version).
-   * My test is more crude but do work... */
-  if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
-       (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
-    {
-      /* We must download the frequency parameters to the
-       * synthetisers (from the EEprom - area 1)
-       * Note : as the EEprom is auto decremented, we set the end
-       * if the area... */
-      m.mmw_fee_addr = 0x0F;
-      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
-		(unsigned char *)&m.mmw_fee_ctrl, 2);
-
-      /* Wait until the download is finished */
-      fee_wait(base, 100, 100);
-
-#ifdef DEBUG_CONFIG_INFO
-      /* The frequency was in the last word downloaded... */
-      mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
-	       (unsigned char *)&m.mmw_fee_data_l, 2);
-
-      /* Print some info for the user */
-      printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
-	     dev->name,
-	     ((m.mmw_fee_data_h << 4) |
-	      (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
-#endif
-
-      /* We must now download the power adjust value (gain) to
-       * the synthetisers (from the EEprom - area 7 - DAC) */
-      m.mmw_fee_addr = 0x61;
-      m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
-      mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
-		(unsigned char *)&m.mmw_fee_ctrl, 2);
-
-      /* Wait until the download is finished */
-    }	/* if 2.00 card */
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Routine to gracefully turn off reception, and wait for any commands
- * to complete.
- * (called in wv_ru_start() and wavelan_close() and wavelan_event())
- */
-static int
-wv_ru_stop(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  unsigned long	flags;
-  int		status;
-  int		spin;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* First, send the LAN controller a stop receive command */
-  wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
-	       OP0_STOP_RCV, SR0_NO_RESULT);
-
-  /* Then, spin until the receive unit goes idle */
-  spin = 300;
-  do
-    {
-      udelay(10);
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
-
-  /* Now, spin until the chip finishes executing its current command */
-  do
-    {
-      udelay(10);
-      outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-      status = inb(LCSR(base));
-    }
-  while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  /* If there was a problem */
-  if(spin <= 0)
-    {
-#ifdef DEBUG_CONFIG_ERRORS
-      printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
-	     dev->name);
-#endif
-      return FALSE;
-    }
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
-#endif
-  return TRUE;
-} /* wv_ru_stop */
-
-/*------------------------------------------------------------------*/
-/*
- * This routine starts the receive unit running.  First, it checks if
- * the card is actually ready. Then the card is instructed to receive
- * packets again.
- * (called in wv_hw_reset() & wavelan_open())
- */
-static int
-wv_ru_start(struct net_device *	dev)
-{
-  unsigned int	base = dev->base_addr;
-  net_local *	lp = netdev_priv(dev);
-  unsigned long	flags;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
-#endif
-
-  /*
-   * We need to start from a quiescent state. To do so, we could check
-   * if the card is already running, but instead we just try to shut
-   * it down. First, we disable reception (in case it was already enabled).
-   */
-  if(!wv_ru_stop(dev))
-    return FALSE;
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Now we know that no command is being executed. */
-
-  /* Set the receive frame pointer and stop pointer */
-  lp->rfp = 0;
-  outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
-
-  /* Reset ring management.  This sets the receive frame pointer to 1 */
-  outb(OP1_RESET_RING_MNGMT, LCCR(base));
-
-#if 0
-  /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
-     should be set as below */
-  /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
-#elif 0
-  /* but I set it 0 instead */
-  lp->stop = 0;
-#else
-  /* but I set it to 3 bytes per packet less than 8K */
-  lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
-#endif
-  outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
-  outb(OP1_INT_ENABLE, LCCR(base));
-  outb(OP1_SWIT_TO_PORT_0, LCCR(base));
-
-  /* Reset receive DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write_slow(base, HACR_DEFAULT);
-
-  /* Receive DMA on channel 1 */
-  wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
-	       CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);
-
-#ifdef DEBUG_I82593_SHOW
-  {
-    int	status;
-    int	opri;
-    int	spin = 10000;
-
-    /* spin until the chip starts receiving */
-    do
-      {
-	outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
-	status = inb(LCSR(base));
-	if(spin-- <= 0)
-	  break;
-      }
-    while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
-	  ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
-    printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
-	   (status & SR3_RCV_STATE_MASK), i);
-  }
-#endif
-
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This routine does a standard config of the WaveLAN controller (i82593).
- * In the ISA driver, this is integrated in wavelan_hardware_reset()
- * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
- */
-static int
-wv_82593_config(struct net_device *	dev)
-{
-  unsigned int			base = dev->base_addr;
-  net_local *			lp = netdev_priv(dev);
-  struct i82593_conf_block	cfblk;
-  int				ret = TRUE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
-#endif
-
-  /* Create & fill i82593 config block
-   *
-   * Now conform to Wavelan document WCIN085B
-   */
-  memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
-  cfblk.d6mod = FALSE;  	/* Run in i82593 advanced mode */
-  cfblk.fifo_limit = 5;         /* = 56 B rx and 40 B tx fifo thresholds */
-  cfblk.forgnesi = FALSE;       /* 0=82C501, 1=AMD7992B compatibility */
-  cfblk.fifo_32 = 1;
-  cfblk.throttle_enb = FALSE;
-  cfblk.contin = TRUE;          /* enable continuous mode */
-  cfblk.cntrxint = FALSE;       /* enable continuous mode receive interrupts */
-  cfblk.addr_len = WAVELAN_ADDR_SIZE;
-  cfblk.acloc = TRUE;           /* Disable source addr insertion by i82593 */
-  cfblk.preamb_len = 0;         /* 2 bytes preamble (SFD) */
-  cfblk.loopback = FALSE;
-  cfblk.lin_prio = 0;   	/* conform to 802.3 backoff algorithm */
-  cfblk.exp_prio = 5;	        /* conform to 802.3 backoff algorithm */
-  cfblk.bof_met = 1;	        /* conform to 802.3 backoff algorithm */
-  cfblk.ifrm_spc = 0x20 >> 4;	/* 32 bit times interframe spacing */
-  cfblk.slottim_low = 0x20 >> 5;	/* 32 bit times slot time */
-  cfblk.slottim_hi = 0x0;
-  cfblk.max_retr = 15;
-  cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE);	/* Promiscuous mode */
-  cfblk.bc_dis = FALSE;         /* Enable broadcast reception */
-  cfblk.crs_1 = TRUE;		/* Transmit without carrier sense */
-  cfblk.nocrc_ins = FALSE;	/* i82593 generates CRC */	
-  cfblk.crc_1632 = FALSE;	/* 32-bit Autodin-II CRC */
-  cfblk.crs_cdt = FALSE;	/* CD not to be interpreted as CS */
-  cfblk.cs_filter = 0;  	/* CS is recognized immediately */
-  cfblk.crs_src = FALSE;	/* External carrier sense */
-  cfblk.cd_filter = 0;  	/* CD is recognized immediately */
-  cfblk.min_fr_len = ETH_ZLEN >> 2;     /* Minimum frame length 64 bytes */
-  cfblk.lng_typ = FALSE;	/* Length field > 1500 = type field */
-  cfblk.lng_fld = TRUE; 	/* Disable 802.3 length field check */
-  cfblk.rxcrc_xf = TRUE;	/* Don't transfer CRC to memory */
-  cfblk.artx = TRUE;		/* Disable automatic retransmission */
-  cfblk.sarec = TRUE;		/* Disable source addr trig of CD */
-  cfblk.tx_jabber = TRUE;	/* Disable jabber jam sequence */
-  cfblk.hash_1 = FALSE; 	/* Use bits 0-5 in mc address hash */
-  cfblk.lbpkpol = TRUE; 	/* Loopback pin active high */
-  cfblk.fdx = FALSE;		/* Disable full duplex operation */
-  cfblk.dummy_6 = 0x3f; 	/* all ones */
-  cfblk.mult_ia = FALSE;	/* No multiple individual addresses */
-  cfblk.dis_bof = FALSE;	/* Disable the backoff algorithm ?! */
-  cfblk.dummy_1 = TRUE; 	/* set to 1 */
-  cfblk.tx_ifs_retrig = 3;	/* Hmm... Disabled */
-#ifdef MULTICAST_ALL
-  cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE);	/* Allow all multicasts */
-#else
-  cfblk.mc_all = FALSE;		/* No multicast all mode */
-#endif
-  cfblk.rcv_mon = 0;		/* Monitor mode disabled */
-  cfblk.frag_acpt = TRUE;	/* Do not accept fragments */
-  cfblk.tstrttrs = FALSE;	/* No start transmission threshold */
-  cfblk.fretx = TRUE;		/* FIFO automatic retransmission */
-  cfblk.syncrqs = FALSE; 	/* Synchronous DRQ deassertion... */
-  cfblk.sttlen = TRUE;  	/* 6 byte status registers */
-  cfblk.rx_eop = TRUE;  	/* Signal EOP on packet reception */
-  cfblk.tx_eop = TRUE;  	/* Signal EOP on packet transmission */
-  cfblk.rbuf_size = RX_SIZE>>11;	/* Set receive buffer size */
-  cfblk.rcvstop = TRUE; 	/* Enable Receive Stop Register */
-
-#ifdef DEBUG_I82593_SHOW
-  print_hex_dump(KERN_DEBUG, "wavelan_cs: config block: ", DUMP_PREFIX_NONE,
-		 16, 1, &cfblk, sizeof(struct i82593_conf_block), false);
-#endif
-
-  /* Copy the config block to the i82593 */
-  outb(TX_BASE & 0xff, PIORL(base));
-  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base));    /* lsb */
-  outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base));	/* msb */
-  outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));
-
-  /* reset transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
-		   OP0_CONFIGURE, SR0_CONFIGURE_DONE))
-    ret = FALSE;
-
-  /* Initialize adapter's ethernet MAC address */
-  outb(TX_BASE & 0xff, PIORL(base));
-  outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-  outb(WAVELAN_ADDR_SIZE, PIOP(base));	/* byte count lsb */
-  outb(0, PIOP(base));			/* byte count msb */
-  outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);
-
-  /* reset transmit DMA pointer */
-  hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-  hacr_write(base, HACR_DEFAULT);
-  if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
-		   OP0_IA_SETUP, SR0_IA_SETUP_DONE))
-    ret = FALSE;
-
-#ifdef WAVELAN_ROAMING
-    /* If roaming is enabled, join the "Beacon Request" multicast group... */
-    /* But only if it's not in there already! */
-  if(do_roaming)
-    dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
-#endif	/* WAVELAN_ROAMING */
-
-  /* If any multicast address to set */
-  if(lp->mc_count)
-    {
-      struct dev_mc_list *	dmi;
-      int			addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
-
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
-	     dev->name, lp->mc_count);
-      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
-	printk(KERN_DEBUG " %pM\n", dmi->dmi_addr);
-#endif
-
-      /* Initialize adapter's ethernet multicast addresses */
-      outb(TX_BASE & 0xff, PIORL(base));
-      outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
-      outb(addrs_len & 0xff, PIOP(base));	/* byte count lsb */
-      outb((addrs_len >> 8), PIOP(base));	/* byte count msb */
-      for(dmi=dev->mc_list; dmi; dmi=dmi->next)
-	outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);
-
-      /* reset transmit DMA pointer */
-      hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
-      hacr_write(base, HACR_DEFAULT);
-      if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
-		       OP0_MC_SETUP, SR0_MC_SETUP_DONE))
-	ret = FALSE;
-      lp->mc_count = dev->mc_count;	/* remember to avoid repeated reset */
-    }
-
-  /* Job done, clear the flag */
-  lp->reconfig_82593 = FALSE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
-#endif
-  return(ret);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Read the Access Configuration Register, perform a software reset,
- * and then re-enable the card's software.
- *
- * If I understand correctly : reset the pcmcia interface of the
- * wavelan.
- * (called by wv_config())
- */
-static int
-wv_pcmcia_reset(struct net_device *	dev)
-{
-  int		i;
-  conf_reg_t	reg = { 0, CS_READ, CISREG_COR, 0 };
-  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
-#endif
-
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-      
-#ifdef DEBUG_CONFIG_INFO
-  printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
-	 dev->name, (u_int) reg.Value);
-#endif
-
-  reg.Action = CS_WRITE;
-  reg.Value = reg.Value | COR_SW_RESET;
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-      
-  reg.Action = CS_WRITE;
-  reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
-  i = pcmcia_access_configuration_register(link, &reg);
-  if (i != 0)
-    {
-      cs_error(link, AccessConfigurationRegister, i);
-      return FALSE;
-    }
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * wavelan_hw_config() is called after a CARD_INSERTION event is
- * received, to configure the wavelan hardware.
- * Note that the reception will be enabled in wavelan->open(), so the
- * device is configured but idle...
- * Performs the following actions:
- * 	1. A pcmcia software reset (using wv_pcmcia_reset())
- *	2. A power reset (reset DMA)
- *	3. Reset the LAN controller
- *	4. Initialize the radio modem (using wv_mmc_init)
- *	5. Configure LAN controller (using wv_82593_config)
- *	6. Perform a diagnostic on the LAN controller
- * (called by wavelan_event() & wv_hw_reset())
- */
-static int
-wv_hw_config(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			ret = FALSE;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
-#endif
-
-  /* compile-time check the sizes of structures */
-  BUILD_BUG_ON(sizeof(psa_t) != PSA_SIZE);
-  BUILD_BUG_ON(sizeof(mmw_t) != MMW_SIZE);
-  BUILD_BUG_ON(sizeof(mmr_t) != MMR_SIZE);
-
-  /* Reset the pcmcia interface */
-  if(wv_pcmcia_reset(dev) == FALSE)
-    return FALSE;
-
-  /* Disable interrupts */
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Disguised goto ;-) */
-  do
-    {
-      /* Power UP the module + reset the modem + reset host adapter
-       * (in fact, reset DMA channels) */
-      hacr_write_slow(base, HACR_RESET);
-      hacr_write(base, HACR_DEFAULT);
-
-      /* Check if the module has been powered up... */
-      if(hasr_read(base) & HASR_NO_CLK)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* initialize the modem */
-      if(wv_mmc_init(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* reset the LAN controller (i82593) */
-      outb(OP0_RESET, LCCR(base));
-      mdelay(1);	/* A bit crude ! */
-
-      /* Initialize the LAN controller */
-      if(wv_82593_config(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* Diagnostic */
-      if(wv_diag(dev) == FALSE)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
-		 dev->name);
-#endif
-	  break;
-	}
-
-      /* 
-       * insert code for loopback test here
-       */
-
-      /* The device is now configured */
-      lp->configured = 1;
-      ret = TRUE;
-    }
-  while(0);
-
-  /* Re-enable interrupts */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
-#endif
-  return(ret);
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Totally reset the wavelan and restart it.
- * Performs the following actions:
- * 	1. Call wv_hw_config()
- *	2. Start the LAN controller's receive unit
- * (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
- */
-static void
-wv_hw_reset(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
-#endif
-
-  lp->nresets++;
-  lp->configured = 0;
-  
-  /* Call wv_hw_config() for most of the reset & init stuff */
-  if(wv_hw_config(dev) == FALSE)
-    return;
-
-  /* start receive unit */
-  wv_ru_start(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
-#endif
-}
-
-/*------------------------------------------------------------------*/
-/*
- * wv_pcmcia_config() is called after a CARD_INSERTION event is
- * received, to configure the PCMCIA socket, and to make the ethernet
- * device available to the system.
- * (called by wavelan_event())
- */
-static int
-wv_pcmcia_config(struct pcmcia_device *	link)
-{
-  struct net_device *	dev = (struct net_device *) link->priv;
-  int			i;
-  win_req_t		req;
-  memreq_t		mem;
-  net_local *		lp = netdev_priv(dev);
-
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
-#endif
-
-  do
-    {
-      i = pcmcia_request_io(link, &link->io);
-      if (i != 0)
-	{
-	  cs_error(link, RequestIO, i);
-	  break;
-	}
-
-      /*
-       * Now allocate an interrupt line.  Note that this does not
-       * actually assign a handler to the interrupt.
-       */
-      i = pcmcia_request_irq(link, &link->irq);
-      if (i != 0)
-	{
-	  cs_error(link, RequestIRQ, i);
-	  break;
-	}
-
-      /*
-       * This actually configures the PCMCIA socket -- setting up
-       * the I/O windows and the interrupt mapping.
-       */
-      link->conf.ConfigIndex = 1;
-      i = pcmcia_request_configuration(link, &link->conf);
-      if (i != 0)
-	{
-	  cs_error(link, RequestConfiguration, i);
-	  break;
-	}
-
-      /*
-       * Allocate a small memory window.  Note that the struct pcmcia_device
-       * structure provides space for one window handle -- if your
-       * device needs several windows, you'll need to keep track of
-       * the handles in your private data structure, link->priv.
-       */
-      req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
-      req.Base = req.Size = 0;
-      req.AccessSpeed = mem_speed;
-      i = pcmcia_request_window(&link, &req, &link->win);
-      if (i != 0)
-	{
-	  cs_error(link, RequestWindow, i);
-	  break;
-	}
-
-      lp->mem = ioremap(req.Base, req.Size);
-      dev->mem_start = (u_long)lp->mem;
-      dev->mem_end = dev->mem_start + req.Size;
-
-      mem.CardOffset = 0; mem.Page = 0;
-      i = pcmcia_map_mem_page(link->win, &mem);
-      if (i != 0)
-	{
-	  cs_error(link, MapMemPage, i);
-	  break;
-	}
-
-      /* Feed device with this info... */
-      dev->irq = link->irq.AssignedIRQ;
-      dev->base_addr = link->io.BasePort1;
-      netif_start_queue(dev);
-
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
-	     lp->mem, dev->irq, (u_int) dev->base_addr);
-#endif
-
-      SET_NETDEV_DEV(dev, &handle_to_dev(link));
-      i = register_netdev(dev);
-      if(i != 0)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
-#endif
-	  break;
-	}
-    }
-  while(0);		/* Humm... Disguised goto !!! */
-
-  /* If any step failed, release any partially configured state */
-  if(i != 0)
-    {
-      wv_pcmcia_release(link);
-      return FALSE;
-    }
-
-  strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
-  link->dev_node = &((net_local *) netdev_priv(dev))->node;
-
-#ifdef DEBUG_CONFIG_TRACE
-  printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
-#endif
-  return TRUE;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * After a card is removed, wv_pcmcia_release() will unregister the net
- * device, and release the PCMCIA configuration.  If the device is
- * still open, this will be postponed until it is closed.
- */
-static void
-wv_pcmcia_release(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-	net_local *		lp = netdev_priv(dev);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
-#endif
-
-	iounmap(lp->mem);
-	pcmcia_disable_device(link);
-
-#ifdef DEBUG_CONFIG_TRACE
-	printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
-#endif
-}
-
-/************************ INTERRUPT HANDLING ************************/
-
-/*
- * This function is the interrupt handler for the WaveLAN card. This
- * routine will be called whenever: 
- *	1. A packet is received.
- *	2. A packet has successfully been transferred and the unit is
- *	   ready to transmit another packet.
- *	3. A command has completed execution.
- */
-static irqreturn_t
-wavelan_interrupt(int		irq,
-		  void *	dev_id)
-{
-  struct net_device *	dev = dev_id;
-  net_local *	lp;
-  unsigned int	base;
-  int		status0;
-  u_int		tx_status;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
-#endif
-
-  lp = netdev_priv(dev);
-  base = dev->base_addr;
-
-#ifdef DEBUG_INTERRUPT_INFO
-  /* Check state of our spinlock (it should be cleared) */
-  if(spin_is_locked(&lp->spinlock))
-    printk(KERN_DEBUG
-	   "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
-	   dev->name);
-#endif
-
-  /* Prevent reentrancy. We need to do that because we may have
-   * multiple interrupt handler running concurently.
-   * It is safe because interrupts are disabled before aquiring
-   * the spinlock. */
-  spin_lock(&lp->spinlock);
-
-  /* Treat all pending interrupts */
-  while(1)
-    {
-      /* ---------------- INTERRUPT CHECKING ---------------- */
-      /*
-       * Look for the interrupt and verify the validity
-       */
-      outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
-      status0 = inb(LCSR(base));
-
-#ifdef DEBUG_INTERRUPT_INFO
-      printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0, 
-	     (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
-      if(status0&SR0_INTERRUPT)
-	{
-	  printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
-		 ((status0 & SR0_EXECUTION) ? "cmd" :
-		  ((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
-		 (status0 & SR0_EVENT_MASK));
-	}
-      else
-	printk("\n");
-#endif
-
-      /* Return if no actual interrupt from i82593 (normal exit) */
-      if(!(status0 & SR0_INTERRUPT))
-	break;
-
-      /* If interrupt is both Rx and Tx or none...
-       * This code in fact is there to catch the spurious interrupt
-       * when you remove the wavelan pcmcia card from the socket */
-      if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
-	 ((status0 & SR0_BOTH_RX_TX) == 0x0))
-	{
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
-		 dev->name, status0);
-#endif
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-	  break;
-	}
-
-      /* ----------------- RECEIVING PACKET ----------------- */
-      /*
-       * When the wavelan signal the reception of a new packet,
-       * we call wv_packet_rcv() to copy if from the buffer and
-       * send it to NET3
-       */
-      if(status0 & SR0_RECEPTION)
-	{
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
-#endif
-
-	  if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
-	    {
-#ifdef DEBUG_INTERRUPT_ERROR
-	      printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
-		     dev->name);
-#endif
-	      dev->stats.rx_over_errors++;
-	      lp->overrunning = 1;
-      	    }
-
-	  /* Get the packet */
-	  wv_packet_rcv(dev);
-	  lp->overrunning = 0;
-
-	  /* Acknowledge the interrupt */
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
-	  continue;
-    	}
-
-      /* ---------------- COMMAND COMPLETION ---------------- */
-      /*
-       * Interrupts issued when the i82593 has completed a command.
-       * Most likely : transmission done
-       */
-
-      /* If a transmission has been done */
-      if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
-	 (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
-	 (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
-	{
-#ifdef DEBUG_TX_ERROR
-	  if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
-	    printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
-		   dev->name);
-#endif
-
-	  /* Get transmission status */
-	  tx_status = inb(LCSR(base));
-	  tx_status |= (inb(LCSR(base)) << 8);
-#ifdef DEBUG_INTERRUPT_INFO
-	  printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
-		 dev->name);
-	  {
-	    u_int	rcv_bytes;
-	    u_char	status3;
-	    rcv_bytes = inb(LCSR(base));
-	    rcv_bytes |= (inb(LCSR(base)) << 8);
-	    status3 = inb(LCSR(base));
-	    printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
-		   tx_status, rcv_bytes, (u_int) status3);
-	  }
-#endif
-	  /* Check for possible errors */
-	  if((tx_status & TX_OK) != TX_OK)
-	    {
-	      dev->stats.tx_errors++;
-
-	      if(tx_status & TX_FRTL)
-		{
-#ifdef DEBUG_TX_ERROR
-		  printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
-			 dev->name);
-#endif
-		}
-	      if(tx_status & TX_UND_RUN)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
-			 dev->name);
-#endif
-		  dev->stats.tx_aborted_errors++;
-		}
-	      if(tx_status & TX_LOST_CTS)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
-#endif
-		  dev->stats.tx_carrier_errors++;
-		}
-	      if(tx_status & TX_LOST_CRS)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
-			 dev->name);
-#endif
-		  dev->stats.tx_carrier_errors++;
-		}
-	      if(tx_status & TX_HRT_BEAT)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
-#endif
-		  dev->stats.tx_heartbeat_errors++;
-		}
-	      if(tx_status & TX_DEFER)
-		{
-#ifdef DEBUG_TX_FAIL
-		  printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
-			 dev->name);
-#endif
-		}
-	      /* Ignore late collisions since they're more likely to happen
-	       * here (the WaveLAN design prevents the LAN controller from
-	       * receiving while it is transmitting). We take action only when
-	       * the maximum retransmit attempts is exceeded.
-	       */
-	      if(tx_status & TX_COLL)
-		{
-		  if(tx_status & TX_MAX_COL)
-		    {
-#ifdef DEBUG_TX_FAIL
-		      printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
-			     dev->name);
-#endif
-		      if(!(tx_status & TX_NCOL_MASK))
-			{
-			  dev->stats.collisions += 0x10;
-			}
-		    }
-		}
-	    }	/* if(!(tx_status & TX_OK)) */
-
-	  dev->stats.collisions += (tx_status & TX_NCOL_MASK);
-	  dev->stats.tx_packets++;
-
-	  netif_wake_queue(dev);
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
-    	} 
-      else	/* if interrupt = transmit done or retransmit done */
-	{
-#ifdef DEBUG_INTERRUPT_ERROR
-	  printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
-		 status0);
-#endif
-	  outb(CR0_INT_ACK | OP0_NOP, LCCR(base));	/* Acknowledge the interrupt */
-    	}
-    }	/* while(1) */
-
-  spin_unlock(&lp->spinlock);
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
-#endif
-
-  /* We always return IRQ_HANDLED, because we will receive empty
-   * interrupts under normal operations. Anyway, it doesn't matter
-   * as we are dealing with an ISA interrupt that can't be shared.
-   *
-   * Explanation : under heavy receive, the following happens :
-   * ->wavelan_interrupt()
-   *    (status0 & SR0_INTERRUPT) != 0
-   *       ->wv_packet_rcv()
-   *    (status0 & SR0_INTERRUPT) != 0
-   *       ->wv_packet_rcv()
-   *    (status0 & SR0_INTERRUPT) == 0	// i.e. no more event
-   * <-wavelan_interrupt()
-   * ->wavelan_interrupt()
-   *    (status0 & SR0_INTERRUPT) == 0	// i.e. empty interrupt
-   * <-wavelan_interrupt()
-   * Jean II */
-  return IRQ_HANDLED;
-} /* wv_interrupt */
-
-/*------------------------------------------------------------------*/
-/*
- * Watchdog: when we start a transmission, a timer is set for us in the
- * kernel.  If the transmission completes, this timer is disabled. If
- * the timer expires, we are called and we try to unlock the hardware.
- *
- * Note : This watchdog is move clever than the one in the ISA driver,
- * because it try to abort the current command before reseting
- * everything...
- * On the other hand, it's a bit simpler, because we don't have to
- * deal with the multiple Tx buffers...
- */
-static void
-wavelan_watchdog(struct net_device *	dev)
-{
-  net_local *		lp = netdev_priv(dev);
-  unsigned int		base = dev->base_addr;
-  unsigned long		flags;
-  int			aborted = FALSE;
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
-#endif
-
-#ifdef DEBUG_INTERRUPT_ERROR
-  printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
-	 dev->name);
-#endif
-
-  spin_lock_irqsave(&lp->spinlock, flags);
-
-  /* Ask to abort the current command */
-  outb(OP0_ABORT, LCCR(base));
-
-  /* Wait for the end of the command (a bit hackish) */
-  if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
-		  OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
-    aborted = TRUE;
-
-  /* Release spinlock here so that wv_hw_reset() can grab it */
-  spin_unlock_irqrestore(&lp->spinlock, flags);
-
-  /* Check if we were successful in aborting it */
-  if(!aborted)
-    {
-      /* It seem that it wasn't enough */
-#ifdef DEBUG_INTERRUPT_ERROR
-      printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
-	     dev->name);
-#endif
-      wv_hw_reset(dev);
-    }
-
-#ifdef DEBUG_PSA_SHOW
-  {
-    psa_t		psa;
-    psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
-    wv_psa_show(&psa);
-  }
-#endif
-#ifdef DEBUG_MMC_SHOW
-  wv_mmc_show(dev);
-#endif
-#ifdef DEBUG_I82593_SHOW
-  wv_ru_show(dev);
-#endif
-
-  /* We are no more waiting for something... */
-  netif_wake_queue(dev);
-
-#ifdef DEBUG_INTERRUPT_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
-#endif
-}
-
-/********************* CONFIGURATION CALLBACKS *********************/
-/*
- * Here are the functions called by the pcmcia package (cardmgr) and
- * linux networking (NET3) for initialization, configuration and
- * deinstallations of the Wavelan Pcmcia Hardware.
- */
-
-/*------------------------------------------------------------------*/
-/*
- * Configure and start up the WaveLAN PCMCIA adaptor.
- * Called by NET3 when it "open" the device.
- */
-static int
-wavelan_open(struct net_device *	dev)
-{
-  net_local *	lp = netdev_priv(dev);
-  struct pcmcia_device *	link = lp->link;
-  unsigned int	base = dev->base_addr;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
-	 (unsigned int) dev);
-#endif
-
-  /* Check if the modem is powered up (wavelan_close() power it down */
-  if(hasr_read(base) & HASR_NO_CLK)
-    {
-      /* Power up (power up time is 250us) */
-      hacr_write(base, HACR_DEFAULT);
-
-      /* Check if the module has been powered up... */
-      if(hasr_read(base) & HASR_NO_CLK)
-	{
-#ifdef DEBUG_CONFIG_ERRORS
-	  printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
-		 dev->name);
-#endif
-	  return FALSE;
-	}
-    }
-
-  /* Start reception and declare the driver ready */
-  if(!lp->configured)
-    return FALSE;
-  if(!wv_ru_start(dev))
-    wv_hw_reset(dev);		/* If problem : reset */
-  netif_start_queue(dev);
-
-  /* Mark the device as used */
-  link->open++;
-
-#ifdef WAVELAN_ROAMING
-  if(do_roaming)
-    wv_roam_init(dev);
-#endif	/* WAVELAN_ROAMING */
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
-#endif
-  return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * Shutdown the WaveLAN PCMCIA adaptor.
- * Called by NET3 when it "close" the device.
- */
-static int
-wavelan_close(struct net_device *	dev)
-{
-  struct pcmcia_device *	link = ((net_local *)netdev_priv(dev))->link;
-  unsigned int	base = dev->base_addr;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
-	 (unsigned int) dev);
-#endif
-
-  /* If the device isn't open, then nothing to do */
-  if(!link->open)
-    {
-#ifdef DEBUG_CONFIG_INFO
-      printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
-#endif
-      return 0;
-    }
-
-#ifdef WAVELAN_ROAMING
-  /* Cleanup of roaming stuff... */
-  if(do_roaming)
-    wv_roam_cleanup(dev);
-#endif	/* WAVELAN_ROAMING */
-
-  link->open--;
-
-  /* If the card is still present */
-  if(netif_running(dev))
-    {
-      netif_stop_queue(dev);
-
-      /* Stop receiving new messages and wait end of transmission */
-      wv_ru_stop(dev);
-
-      /* Power down the module */
-      hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
-    }
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
-#endif
-  return 0;
-}
-
-static const struct net_device_ops wavelan_netdev_ops = {
-	.ndo_open 		= wavelan_open,
-	.ndo_stop		= wavelan_close,
-	.ndo_start_xmit		= wavelan_packet_xmit,
-	.ndo_set_multicast_list = wavelan_set_multicast_list,
-#ifdef SET_MAC_ADDRESS
-	.ndo_set_mac_address	= wavelan_set_mac_address,
-#endif
-	.ndo_tx_timeout		= wavelan_watchdog,
-	.ndo_change_mtu		= eth_change_mtu,
-	.ndo_validate_addr	= eth_validate_addr,
-};
-
-/*------------------------------------------------------------------*/
-/*
- * wavelan_attach() creates an "instance" of the driver, allocating
- * local data structures for one device (one interface).  The device
- * is registered with Card Services.
- *
- * The dev_link structure is initialized, but we don't actually
- * configure the card at this point -- we wait until we receive a
- * card insertion event.
- */
-static int
-wavelan_probe(struct pcmcia_device *p_dev)
-{
-  struct net_device *	dev;		/* Interface generic data */
-  net_local *	lp;		/* Interface specific data */
-  int ret;
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "-> wavelan_attach()\n");
-#endif
-
-  /* The io structure describes IO port mapping */
-  p_dev->io.NumPorts1 = 8;
-  p_dev->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
-  p_dev->io.IOAddrLines = 3;
-
-  /* Interrupt setup */
-  p_dev->irq.Attributes = IRQ_TYPE_DYNAMIC_SHARING | IRQ_HANDLE_PRESENT;
-  p_dev->irq.IRQInfo1 = IRQ_LEVEL_ID;
-  p_dev->irq.Handler = wavelan_interrupt;
-
-  /* General socket configuration */
-  p_dev->conf.Attributes = CONF_ENABLE_IRQ;
-  p_dev->conf.IntType = INT_MEMORY_AND_IO;
-
-  /* Allocate the generic data structure */
-  dev = alloc_etherdev(sizeof(net_local));
-  if (!dev)
-      return -ENOMEM;
-
-  p_dev->priv = p_dev->irq.Instance = dev;
-
-  lp = netdev_priv(dev);
-
-  /* Init specific data */
-  lp->configured = 0;
-  lp->reconfig_82593 = FALSE;
-  lp->nresets = 0;
-  /* Multicast stuff */
-  lp->promiscuous = 0;
-  lp->allmulticast = 0;
-  lp->mc_count = 0;
-
-  /* Init spinlock */
-  spin_lock_init(&lp->spinlock);
-
-  /* back links */
-  lp->dev = dev;
-
-  /* wavelan NET3 callbacks */
-  dev->netdev_ops = &wavelan_netdev_ops;
-  dev->watchdog_timeo	= WATCHDOG_JIFFIES;
-  SET_ETHTOOL_OPS(dev, &ops);
-
-  dev->wireless_handlers = &wavelan_handler_def;
-  lp->wireless_data.spy_data = &lp->spy_data;
-  dev->wireless_data = &lp->wireless_data;
-
-  /* Other specific data */
-  dev->mtu = WAVELAN_MTU;
-
-  ret = wv_pcmcia_config(p_dev);
-  if (ret)
-	  return ret;
-
-  ret = wv_hw_config(dev);
-  if (ret) {
-	  dev->irq = 0;
-	  pcmcia_disable_device(p_dev);
-	  return ret;
-  }
-
-  wv_init_info(dev);
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "<- wavelan_attach()\n");
-#endif
-
-  return 0;
-}
-
-/*------------------------------------------------------------------*/
-/*
- * This deletes a driver "instance".  The device is de-registered with
- * Card Services.  If it has been released, all local data structures
- * are freed.  Otherwise, the structures will be freed when the device
- * is released.
- */
-static void
-wavelan_detach(struct pcmcia_device *link)
-{
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
-#endif
-
-  /* Some others haven't done their job : give them another chance */
-  wv_pcmcia_release(link);
-
-  /* Free pieces */
-  if(link->priv)
-    {
-      struct net_device *	dev = (struct net_device *) link->priv;
-
-      /* Remove ourselves from the kernel list of ethernet devices */
-      /* Warning : can't be called from interrupt, timer or wavelan_close() */
-      if (link->dev_node)
-	unregister_netdev(dev);
-      link->dev_node = NULL;
-      ((net_local *)netdev_priv(dev))->link = NULL;
-      ((net_local *)netdev_priv(dev))->dev = NULL;
-      free_netdev(dev);
-    }
-
-#ifdef DEBUG_CALLBACK_TRACE
-  printk(KERN_DEBUG "<- wavelan_detach()\n");
-#endif
-}
-
-static int wavelan_suspend(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-
-	/* NB: wavelan_close will be called, but too late, so we are
-	 * obliged to close nicely the wavelan here. David, could you
-	 * close the device before suspending them ? And, by the way,
-	 * could you, on resume, add a "route add -net ..." after the
-	 * ifconfig up ? Thanks... */
-
-	/* Stop receiving new messages and wait end of transmission */
-	wv_ru_stop(dev);
-
-	if (link->open)
-		netif_device_detach(dev);
-
-	/* Power down the module */
-	hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
-
-	return 0;
-}
-
-static int wavelan_resume(struct pcmcia_device *link)
-{
-	struct net_device *	dev = (struct net_device *) link->priv;
-
-	if (link->open) {
-		wv_hw_reset(dev);
-		netif_device_attach(dev);
-	}
-
-	return 0;
-}
-
-
-static struct pcmcia_device_id wavelan_ids[] = {
-	PCMCIA_DEVICE_PROD_ID12("AT&T","WaveLAN/PCMCIA", 0xe7c5affd, 0x1bc50975),
-	PCMCIA_DEVICE_PROD_ID12("Digital", "RoamAbout/DS", 0x9999ab35, 0x00d05e06),
-	PCMCIA_DEVICE_PROD_ID12("Lucent Technologies", "WaveLAN/PCMCIA", 0x23eb9949, 0x1bc50975),
-	PCMCIA_DEVICE_PROD_ID12("NCR", "WaveLAN/PCMCIA", 0x24358cd4, 0x1bc50975),
-	PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, wavelan_ids);
-
-static struct pcmcia_driver wavelan_driver = {
-	.owner		= THIS_MODULE,
-	.drv		= {
-		.name	= "wavelan_cs",
-	},
-	.probe		= wavelan_probe,
-	.remove		= wavelan_detach,
-	.id_table       = wavelan_ids,
-	.suspend	= wavelan_suspend,
-	.resume		= wavelan_resume,
-};
-
-static int __init
-init_wavelan_cs(void)
-{
-	return pcmcia_register_driver(&wavelan_driver);
-}
-
-static void __exit
-exit_wavelan_cs(void)
-{
-	pcmcia_unregister_driver(&wavelan_driver);
-}
-
-module_init(init_wavelan_cs);
-module_exit(exit_wavelan_cs);
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h
deleted file mode 100644
index 2e4bfe4147c..00000000000
--- a/drivers/net/wireless/wavelan_cs.h
+++ /dev/null
@@ -1,386 +0,0 @@
-/*
- *	Wavelan Pcmcia driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganization and extension of the driver.
- * Original copyright follow. See wavelan_cs.h for details.
- *
- * This file contain the declarations of the Wavelan hardware. Note that
- * the Pcmcia Wavelan include a i82593 controller (see definitions in
- * file i82593.h).
- *
- * The main difference between the pcmcia hardware and the ISA one is
- * the Ethernet Controller (i82593 instead of i82586). The i82593 allow
- * only one send buffer. The PSA (Parameter Storage Area : EEprom for
- * permanent storage of various info) is memory mapped, but not the
- * MMI (Modem Management Interface).
- */
-
-/*
- * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card: 
- *   An Ethernet-like radio transceiver controlled by an Intel 82593
- *   coprocessor.
- *
- *
- ****************************************************************************
- *   Copyright 1995
- *   Anthony D. Joseph
- *   Massachusetts Institute of Technology
- *
- *   Permission to use, copy, modify, and distribute this program
- *   for any purpose and without fee is hereby granted, provided
- *   that this copyright and permission notice appear on all copies
- *   and supporting documentation, the name of M.I.T. not be used
- *   in advertising or publicity pertaining to distribution of the
- *   program without specific prior permission, and notice be given
- *   in supporting documentation that copying and distribution is
- *   by permission of M.I.T.  M.I.T. makes no representations about
- *   the suitability of this software for any purpose.  It is pro-
- *   vided "as is" without express or implied warranty.         
- ****************************************************************************
- *
- *
- * Credits:
- *     Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for
- *       providing extremely useful information about WaveLAN PCMCIA hardware
- *
- *     This driver is based upon several other drivers, in particular:
- *       David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
- *       Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
- *	 Anders Klemets' PCMCIA WaveLAN adapter driver
- *       Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
- */
-
-#ifndef _WAVELAN_CS_H
-#define	_WAVELAN_CS_H
-
-/************************** MAGIC NUMBERS ***************************/
-
-/* The detection of the wavelan card is made by reading the MAC address
- * from the card and checking it. If you have a non AT&T product (OEM,
- * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this
- * part to accommodate your hardware...
- */
-static const unsigned char	MAC_ADDRESSES[][3] =
-{
-  { 0x08, 0x00, 0x0E },		/* AT&T Wavelan (standard) & DEC RoamAbout */
-  { 0x08, 0x00, 0x6A },		/* AT&T Wavelan (alternate) */
-  { 0x00, 0x00, 0xE1 },		/* Hitachi Wavelan */
-  { 0x00, 0x60, 0x1D }		/* Lucent Wavelan (another one) */
-  /* Add your card here and send me the patch ! */
-};
-
-/*
- * Constants used to convert channels to frequencies
- */
-
-/* Frequency available in the 2.0 modem, in units of 250 kHz
- * (as read in the offset register of the dac area).
- * Used to map channel numbers used by `wfreqsel' to frequencies
- */
-static const short	channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
-				    0xD0, 0xF0, 0xF8, 0x150 };
-
-/* Frequencies of the 1.0 modem (fixed frequencies).
- * Use to map the PSA `subband' to a frequency
- * Note : all frequencies apart from the first one need to be multiplied by 10
- */
-static const int	fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
-
-
-/*************************** PC INTERFACE ****************************/
-
-/* WaveLAN host interface definitions */
-
-#define	LCCR(base)	(base)		/* LAN Controller Command Register */
-#define	LCSR(base)	(base)		/* LAN Controller Status Register */
-#define	HACR(base)	(base+0x1)	/* Host Adapter Command Register */
-#define	HASR(base)	(base+0x1)	/* Host Adapter Status Register */
-#define PIORL(base)	(base+0x2)	/* Program I/O Register Low */
-#define RPLL(base)	(base+0x2)	/* Receive Pointer Latched Low */
-#define PIORH(base)	(base+0x3)	/* Program I/O Register High */
-#define RPLH(base)	(base+0x3)	/* Receive Pointer Latched High */
-#define PIOP(base)	(base+0x4)	/* Program I/O Port */
-#define MMR(base)	(base+0x6)	/* MMI Address Register */
-#define MMD(base)	(base+0x7)	/* MMI Data Register */
-
-/* Host Adaptor Command Register bit definitions */
-
-#define HACR_LOF	  (1 << 3)	/* Lock Out Flag, toggle every 250ms */
-#define HACR_PWR_STAT	  (1 << 4)	/* Power State, 1=active, 0=sleep */
-#define HACR_TX_DMA_RESET (1 << 5)	/* Reset transmit DMA ptr on high */
-#define HACR_RX_DMA_RESET (1 << 6)	/* Reset receive DMA ptr on high */
-#define HACR_ROM_WEN	  (1 << 7)	/* EEPROM write enabled when true */
-
-#define HACR_RESET              (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET)
-#define	HACR_DEFAULT		(HACR_PWR_STAT)
-
-/* Host Adapter Status Register bit definitions */
-
-#define HASR_MMI_BUSY	(1 << 2)	/* MMI is busy when true */
-#define HASR_LOF	(1 << 3)	/* Lock out flag status */
-#define HASR_NO_CLK	(1 << 4)	/* active when modem not connected */
-
-/* Miscellaneous bit definitions */
-
-#define PIORH_SEL_TX	(1 << 5)	/* PIOR points to 0=rx/1=tx buffer */
-#define MMR_MMI_WR	(1 << 0)	/* Next MMI cycle is 0=read, 1=write */
-#define PIORH_MASK	0x1f		/* only low 5 bits are significant */
-#define RPLH_MASK	0x1f		/* only low 5 bits are significant */
-#define MMI_ADDR_MASK	0x7e		/* Bits 1-6 of MMR are significant */
-
-/* Attribute Memory map */
-
-#define CIS_ADDR	0x0000		/* Card Information Status Register */
-#define PSA_ADDR	0x0e00		/* Parameter Storage Area address */
-#define EEPROM_ADDR	0x1000		/* EEPROM address (unused ?) */
-#define COR_ADDR	0x4000		/* Configuration Option Register */
-
-/* Configuration Option Register bit definitions */
-
-#define COR_CONFIG	(1 << 0)	/* Config Index, 0 when unconfigured */
-#define COR_SW_RESET	(1 << 7)	/* Software Reset on true */
-#define COR_LEVEL_IRQ	(1 << 6)	/* Level IRQ */
-
-/* Local Memory map */
-
-#define RX_BASE		0x0000		/* Receive memory, 8 kB */
-#define TX_BASE		0x2000		/* Transmit memory, 2 kB */
-#define UNUSED_BASE	0x2800		/* Unused, 22 kB */
-#define RX_SIZE		(TX_BASE-RX_BASE)	/* Size of receive area */
-#define RX_SIZE_SHIFT	6		/* Bits to shift in stop register */
-
-#define TRUE  1
-#define FALSE 0
-
-#define MOD_ENAL 1
-#define MOD_PROM 2
-
-/* Size of a MAC address */
-#define WAVELAN_ADDR_SIZE	6
-
-/* Maximum size of Wavelan packet */
-#define WAVELAN_MTU	1500
-
-#define	MAXDATAZ		(6 + 6 + 2 + WAVELAN_MTU)
-
-/********************** PARAMETER STORAGE AREA **********************/
-
-/*
- * Parameter Storage Area (PSA).
- */
-typedef struct psa_t	psa_t;
-struct psa_t
-{
-  /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */
-  unsigned char	psa_io_base_addr_1;	/* [0x00] Base address 1 ??? */
-  unsigned char	psa_io_base_addr_2;	/* [0x01] Base address 2 */
-  unsigned char	psa_io_base_addr_3;	/* [0x02] Base address 3 */
-  unsigned char	psa_io_base_addr_4;	/* [0x03] Base address 4 */
-  unsigned char	psa_rem_boot_addr_1;	/* [0x04] Remote Boot Address 1 */
-  unsigned char	psa_rem_boot_addr_2;	/* [0x05] Remote Boot Address 2 */
-  unsigned char	psa_rem_boot_addr_3;	/* [0x06] Remote Boot Address 3 */
-  unsigned char	psa_holi_params;	/* [0x07] HOst Lan Interface (HOLI) Parameters */
-  unsigned char	psa_int_req_no;		/* [0x08] Interrupt Request Line */
-  unsigned char	psa_unused0[7];		/* [0x09-0x0F] unused */
-
-  unsigned char	psa_univ_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x10-0x15] Universal (factory) MAC Address */
-  unsigned char	psa_local_mac_addr[WAVELAN_ADDR_SIZE];	/* [0x16-1B] Local MAC Address */
-  unsigned char	psa_univ_local_sel;	/* [0x1C] Universal Local Selection */
-#define		PSA_UNIVERSAL	0		/* Universal (factory) */
-#define		PSA_LOCAL	1		/* Local */
-  unsigned char	psa_comp_number;	/* [0x1D] Compatability Number: */
-#define		PSA_COMP_PC_AT_915	0 	/* PC-AT 915 MHz	*/
-#define		PSA_COMP_PC_MC_915	1 	/* PC-MC 915 MHz	*/
-#define		PSA_COMP_PC_AT_2400	2 	/* PC-AT 2.4 GHz	*/
-#define		PSA_COMP_PC_MC_2400	3 	/* PC-MC 2.4 GHz	*/
-#define		PSA_COMP_PCMCIA_915	4 	/* PCMCIA 915 MHz or 2.0 */
-  unsigned char	psa_thr_pre_set;	/* [0x1E] Modem Threshold Preset */
-  unsigned char	psa_feature_select;	/* [0x1F] Call code required (1=on) */
-#define		PSA_FEATURE_CALL_CODE	0x01 	/* Call code required (Japan) */
-  unsigned char	psa_subband;		/* [0x20] Subband	*/
-#define		PSA_SUBBAND_915		0	/* 915 MHz or 2.0 */
-#define		PSA_SUBBAND_2425	1	/* 2425 MHz	*/
-#define		PSA_SUBBAND_2460	2	/* 2460 MHz	*/
-#define		PSA_SUBBAND_2484	3	/* 2484 MHz	*/
-#define		PSA_SUBBAND_2430_5	4	/* 2430.5 MHz	*/
-  unsigned char	psa_quality_thr;	/* [0x21] Modem Quality Threshold */
-  unsigned char	psa_mod_delay;		/* [0x22] Modem Delay ??? (reserved) */
-  unsigned char	psa_nwid[2];		/* [0x23-0x24] Network ID */
-  unsigned char	psa_nwid_select;	/* [0x25] Network ID Select On Off */
-  unsigned char	psa_encryption_select;	/* [0x26] Encryption On Off */
-  unsigned char	psa_encryption_key[8];	/* [0x27-0x2E] Encryption Key */
-  unsigned char	psa_databus_width;	/* [0x2F] AT bus width select 8/16 */
-  unsigned char	psa_call_code[8];	/* [0x30-0x37] (Japan) Call Code */
-  unsigned char	psa_nwid_prefix[2];	/* [0x38-0x39] Roaming domain */
-  unsigned char	psa_reserved[2];	/* [0x3A-0x3B] Reserved - fixed 00 */
-  unsigned char	psa_conf_status;	/* [0x3C] Conf Status, bit 0=1:config*/
-  unsigned char	psa_crc[2];		/* [0x3D] CRC-16 over PSA */
-  unsigned char	psa_crc_status;		/* [0x3F] CRC Valid Flag */
-};
-
-/* Size for structure checking (if padding is correct) */
-#define	PSA_SIZE	64
-
-/* Calculate offset of a field in the above structure
- * Warning : only even addresses are used */
-#define	psaoff(p,f) 	((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
-
-/******************** MODEM MANAGEMENT INTERFACE ********************/
-
-/*
- * Modem Management Controller (MMC) write structure.
- */
-typedef struct mmw_t	mmw_t;
-struct mmw_t
-{
-  unsigned char	mmw_encr_key[8];	/* encryption key */
-  unsigned char	mmw_encr_enable;	/* enable/disable encryption */
-#define	MMW_ENCR_ENABLE_MODE	0x02	/* Mode of security option */
-#define	MMW_ENCR_ENABLE_EN	0x01	/* Enable security option */
-  unsigned char	mmw_unused0[1];		/* unused */
-  unsigned char	mmw_des_io_invert;	/* Encryption option */
-#define	MMW_DES_IO_INVERT_RES	0x0F	/* Reserved */
-#define	MMW_DES_IO_INVERT_CTRL	0xF0	/* Control ??? (set to 0) */
-  unsigned char	mmw_unused1[5];		/* unused */
-  unsigned char	mmw_loopt_sel;		/* looptest selection */
-#define	MMW_LOOPT_SEL_DIS_NWID	0x40	/* disable NWID filtering */
-#define	MMW_LOOPT_SEL_INT	0x20	/* activate Attention Request */
-#define	MMW_LOOPT_SEL_LS	0x10	/* looptest w/o collision avoidance */
-#define MMW_LOOPT_SEL_LT3A	0x08	/* looptest 3a */
-#define	MMW_LOOPT_SEL_LT3B	0x04	/* looptest 3b */
-#define	MMW_LOOPT_SEL_LT3C	0x02	/* looptest 3c */
-#define	MMW_LOOPT_SEL_LT3D	0x01	/* looptest 3d */
-  unsigned char	mmw_jabber_enable;	/* jabber timer enable */
-  /* Abort transmissions > 200 ms */
-  unsigned char	mmw_freeze;		/* freeze / unfreeeze signal level */
-  /* 0 : signal level & qual updated for every new message, 1 : frozen */
-  unsigned char	mmw_anten_sel;		/* antenna selection */
-#define MMW_ANTEN_SEL_SEL	0x01	/* direct antenna selection */
-#define	MMW_ANTEN_SEL_ALG_EN	0x02	/* antenna selection algo. enable */
-  unsigned char	mmw_ifs;		/* inter frame spacing */
-  /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
-  unsigned char	mmw_mod_delay;	 	/* modem delay (synchro) */
-  unsigned char	mmw_jam_time;		/* jamming time (after collision) */
-  unsigned char	mmw_unused2[1];		/* unused */
-  unsigned char	mmw_thr_pre_set;	/* level threshold preset */
-  /* Discard all packet with signal < this value (4) */
-  unsigned char	mmw_decay_prm;		/* decay parameters */
-  unsigned char	mmw_decay_updat_prm;	/* decay update parameterz */
-  unsigned char	mmw_quality_thr;	/* quality (z-quotient) threshold */
-  /* Discard all packet with quality < this value (3) */
-  unsigned char	mmw_netw_id_l;		/* NWID low order byte */
-  unsigned char	mmw_netw_id_h;		/* NWID high order byte */
-  /* Network ID or Domain : create virtual net on the air */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmw_mode_select;	/* for analog tests (set to 0) */
-  unsigned char	mmw_unused3[1];		/* unused */
-  unsigned char	mmw_fee_ctrl;		/* frequency eeprom control */
-#define	MMW_FEE_CTRL_PRE	0x10	/* Enable protected instructions */
-#define	MMW_FEE_CTRL_DWLD	0x08	/* Download eeprom to mmc */
-#define	MMW_FEE_CTRL_CMD	0x07	/* EEprom commands : */
-#define	MMW_FEE_CTRL_READ	0x06	/* Read */
-#define	MMW_FEE_CTRL_WREN	0x04	/* Write enable */
-#define	MMW_FEE_CTRL_WRITE	0x05	/* Write data to address */
-#define	MMW_FEE_CTRL_WRALL	0x04	/* Write data to all addresses */
-#define	MMW_FEE_CTRL_WDS	0x04	/* Write disable */
-#define	MMW_FEE_CTRL_PRREAD	0x16	/* Read addr from protect register */
-#define	MMW_FEE_CTRL_PREN	0x14	/* Protect register enable */
-#define	MMW_FEE_CTRL_PRCLEAR	0x17	/* Unprotect all registers */
-#define	MMW_FEE_CTRL_PRWRITE	0x15	/* Write addr in protect register */
-#define	MMW_FEE_CTRL_PRDS	0x14	/* Protect register disable */
-  /* Never issue this command (PRDS) : it's irreversible !!! */
-
-  unsigned char	mmw_fee_addr;		/* EEprom address */
-#define	MMW_FEE_ADDR_CHANNEL	0xF0	/* Select the channel */
-#define	MMW_FEE_ADDR_OFFSET	0x0F	/* Offset in channel data */
-#define	MMW_FEE_ADDR_EN		0xC0	/* FEE_CTRL enable operations */
-#define	MMW_FEE_ADDR_DS		0x00	/* FEE_CTRL disable operations */
-#define	MMW_FEE_ADDR_ALL	0x40	/* FEE_CTRL all operations */
-#define	MMW_FEE_ADDR_CLEAR	0xFF	/* FEE_CTRL clear operations */
-
-  unsigned char	mmw_fee_data_l;		/* Write data to EEprom */
-  unsigned char	mmw_fee_data_h;		/* high octet */
-  unsigned char	mmw_ext_ant;		/* Setting for external antenna */
-#define	MMW_EXT_ANT_EXTANT	0x01	/* Select external antenna */
-#define	MMW_EXT_ANT_POL		0x02	/* Polarity of the antenna */
-#define	MMW_EXT_ANT_INTERNAL	0x00	/* Internal antenna */
-#define	MMW_EXT_ANT_EXTERNAL	0x03	/* External antenna */
-#define	MMW_EXT_ANT_IQ_TEST	0x1C	/* IQ test pattern (set to 0) */
-} __attribute__((packed));
-
-/* Size for structure checking (if padding is correct) */
-#define	MMW_SIZE	37
-
-/* Calculate offset of a field in the above structure */
-#define	mmwoff(p,f) 	(unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
-
-
-/*
- * Modem Management Controller (MMC) read structure.
- */
-typedef struct mmr_t	mmr_t;
-struct mmr_t
-{
-  unsigned char	mmr_unused0[8];		/* unused */
-  unsigned char	mmr_des_status;		/* encryption status */
-  unsigned char	mmr_des_avail;		/* encryption available (0x55 read) */
-#define	MMR_DES_AVAIL_DES	0x55		/* DES available */
-#define	MMR_DES_AVAIL_AES	0x33		/* AES (AT&T) available */
-  unsigned char	mmr_des_io_invert;	/* des I/O invert register */
-  unsigned char	mmr_unused1[5];		/* unused */
-  unsigned char	mmr_dce_status;		/* DCE status */
-#define	MMR_DCE_STATUS_RX_BUSY		0x01	/* receiver busy */
-#define	MMR_DCE_STATUS_LOOPT_IND	0x02	/* loop test indicated */
-#define	MMR_DCE_STATUS_TX_BUSY		0x04	/* transmitter on */
-#define	MMR_DCE_STATUS_JBR_EXPIRED	0x08	/* jabber timer expired */
-#define MMR_DCE_STATUS			0x0F	/* mask to get the bits */
-  unsigned char	mmr_dsp_id;		/* DSP id (AA = Daedalus rev A) */
-  unsigned char	mmr_unused2[2];		/* unused */
-  unsigned char	mmr_correct_nwid_l;	/* # of correct NWID's rxd (low) */
-  unsigned char	mmr_correct_nwid_h;	/* # of correct NWID's rxd (high) */
-  /* Warning : Read high order octet first !!! */
-  unsigned char	mmr_wrong_nwid_l;	/* # of wrong NWID's rxd (low) */
-  unsigned char	mmr_wrong_nwid_h;	/* # of wrong NWID's rxd (high) */
-  unsigned char	mmr_thr_pre_set;	/* level threshold preset */
-#define	MMR_THR_PRE_SET		0x3F		/* level threshold preset */
-#define	MMR_THR_PRE_SET_CUR	0x80		/* Current signal above it */
-  unsigned char	mmr_signal_lvl;		/* signal level */
-#define	MMR_SIGNAL_LVL		0x3F		/* signal level */
-#define	MMR_SIGNAL_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_silence_lvl;	/* silence level (noise) */
-#define	MMR_SILENCE_LVL		0x3F		/* silence level */
-#define	MMR_SILENCE_LVL_VALID	0x80		/* Updated since last read */
-  unsigned char	mmr_sgnl_qual;		/* signal quality */
-#define	MMR_SGNL_QUAL		0x0F		/* signal quality */
-#define	MMR_SGNL_QUAL_ANT	0x80		/* current antenna used */
-  unsigned char	mmr_netw_id_l;		/* NWID low order byte ??? */
-  unsigned char	mmr_unused3[3];		/* unused */
-
-  /* 2.0 Hardware extension - frequency selection support */
-  unsigned char	mmr_fee_status;		/* Status of frequency eeprom */
-#define	MMR_FEE_STATUS_ID	0xF0		/* Modem revision id */
-#define	MMR_FEE_STATUS_DWLD	0x08		/* Download in progress */
-#define	MMR_FEE_STATUS_BUSY	0x04		/* EEprom busy */
-  unsigned char	mmr_unused4[1];		/* unused */
-  unsigned char	mmr_fee_data_l;		/* Read data from eeprom (low) */
-  unsigned char	mmr_fee_data_h;		/* Read data from eeprom (high) */
-};
-
-/* Size for structure checking (if padding is correct) */
-#define	MMR_SIZE	36
-
-/* Calculate offset of a field in the above structure */
-#define	mmroff(p,f) 	(unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
-
-
-/* Make the two above structures one */
-typedef union mm_t
-{
-  struct mmw_t	w;	/* Write to the mmc */
-  struct mmr_t	r;	/* Read from the mmc */
-} mm_t;
-
-#endif /* _WAVELAN_CS_H */
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
deleted file mode 100644
index 81d91531c4f..00000000000
--- a/drivers/net/wireless/wavelan_cs.p.h
+++ /dev/null
@@ -1,766 +0,0 @@
-/*
- *	Wavelan Pcmcia driver
- *
- *		Jean II - HPLB '96
- *
- * Reorganisation and extension of the driver.
- *
- * This file contain all definition and declarations necessary for the
- * wavelan pcmcia driver. This file is a private header, so it should
- * be included only on wavelan_cs.c !!!
- */
-
-#ifndef WAVELAN_CS_P_H
-#define WAVELAN_CS_P_H
-
-/************************** DOCUMENTATION **************************/
-/*
- * This driver provide a Linux interface to the Wavelan Pcmcia hardware
- * The Wavelan is a product of Lucent (http://www.wavelan.com/).
- * This division was formerly part of NCR and then AT&T.
- * Wavelan are also distributed by DEC (RoamAbout DS)...
- *
- * To know how to use this driver, read the PCMCIA HOWTO.
- * If you want to exploit the many other fonctionalities, look comments
- * in the code...
- *
- * This driver is the result of the effort of many peoples (see below).
- */
-
-/* ------------------------ SPECIFIC NOTES ------------------------ */
-/*
- * Web page
- * --------
- *	I try to maintain a web page with the Wireless LAN Howto at :
- *	    http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
- *
- * SMP
- * ---
- *	We now are SMP compliant (I eventually fixed the remaining bugs).
- *	The driver has been tested on a dual P6-150 and survived my usual
- *	set of torture tests.
- *	Anyway, I spent enough time chasing interrupt re-entrancy during
- *	errors or reconfigure, and I designed the locked/unlocked sections
- *	of the driver with great care, and with the recent addition of
- *	the spinlock (thanks to the new API), we should be quite close to
- *	the truth.
- *	The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
- *	but better safe than sorry (especially at 2 Mb/s ;-).
- *
- *	I have also looked into disabling only our interrupt on the card
- *	(via HACR) instead of all interrupts in the processor (via cli),
- *	so that other driver are not impacted, and it look like it's
- *	possible, but it's very tricky to do right (full of races). As
- *	the gain would be mostly for SMP systems, it can wait...
- *
- * Debugging and options
- * ---------------------
- *	You will find below a set of '#define" allowing a very fine control
- *	on the driver behaviour and the debug messages printed.
- *	The main options are :
- *	o WAVELAN_ROAMING, for the experimental roaming support.
- *	o SET_PSA_CRC, to have your card correctly recognised by
- *	  an access point and the Point-to-Point diagnostic tool.
- *	o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
- *	  (otherwise we always start afresh with some defaults)
- *
- * wavelan_cs.o is darn too big
- * -------------------------
- *	That's true ! There is a very simple way to reduce the driver
- *	object by 33% (yes !). Comment out the following line :
- *		#include <linux/wireless.h>
- *	Other compile options can also reduce the size of it...
- *
- * MAC address and hardware detection :
- * ----------------------------------
- *	The detection code of the wavelan chech that the first 3
- *	octets of the MAC address fit the company code. This type of
- *	detection work well for AT&T cards (because the AT&T code is
- *	hardcoded in wavelan_cs.h), but of course will fail for other
- *	manufacturer.
- *
- *	If you are sure that your card is derived from the wavelan,
- *	here is the way to configure it :
- *	1) Get your MAC address
- *		a) With your card utilities (wfreqsel, instconf, ...)
- *		b) With the driver :
- *			o compile the kernel with DEBUG_CONFIG_INFO enabled
- *			o Boot and look the card messages
- *	2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
- *	3) Compile & verify
- *	4) Send me the MAC code - I will include it in the next version...
- *
- */
-
-/* --------------------- WIRELESS EXTENSIONS --------------------- */
-/*
- * This driver is the first one to support "wireless extensions".
- * This set of extensions provide you some way to control the wireless
- * caracteristics of the hardware in a standard way and support for
- * applications for taking advantage of it (like Mobile IP).
- *
- * It might be a good idea as well to fetch the wireless tools to
- * configure the device and play a bit.
- */
-
-/* ---------------------------- FILES ---------------------------- */
-/*
- * wavelan_cs.c :	The actual code for the driver - C functions
- *
- * wavelan_cs.p.h :	Private header : local types / vars for the driver
- *
- * wavelan_cs.h :	Description of the hardware interface & structs
- *
- * i82593.h :		Description if the Ethernet controller
- */
-
-/* --------------------------- HISTORY --------------------------- */
-/*
- * The history of the Wavelan drivers is as complicated as history of
- * the Wavelan itself (NCR -> AT&T -> Lucent).
- *
- * All started with Anders Klemets <klemets@paul.rutgers.edu>,
- * writing a Wavelan ISA driver for the MACH microkernel. Girish
- * Welling <welling@paul.rutgers.edu> had also worked on it.
- * Keith Moore modify this for the Pcmcia hardware.
- * 
- * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
- * and add specific Pcmcia support (there is currently no equivalent
- * of the PCMCIA package under BSD...).
- *
- * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
- *
- * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
- *
- * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
- * (with help of the BSDI PCMCIA driver) for PCMCIA.
- * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
- * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
- * correctly 2.00 cards (2.4 GHz with frequency selection).
- * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
- * Pcmcia package (+ bug corrections).
- *
- * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
- * patchs to the Pcmcia driver. After, I added code in the ISA driver
- * for Wireless Extensions and full support of frequency selection
- * cards. Now, I'm doing the same to the Pcmcia driver + some
- * reorganisation.
- * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
- * much needed informations on the Wavelan hardware.
- */
-
-/* By the way : for the copyright & legal stuff :
- * Almost everybody wrote code under GNU or BSD license (or alike),
- * and want that their original copyright remain somewhere in the
- * code (for myself, I go with the GPL).
- * Nobody want to take responsibility for anything, except the fame...
- */
-
-/* --------------------------- CREDITS --------------------------- */
-/*
- * Credits:
- *    Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
- *	Loeke Brederveld of Lucent for providing extremely useful
- *	information about WaveLAN PCMCIA hardware
- *
- *    This driver is based upon several other drivers, in particular:
- *	David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
- *	Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
- *	Anders Klemets' PCMCIA WaveLAN adapter driver
- *	Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
- *
- * Additional Credits:
- *
- *    This software was originally developed under Linux 1.2.3
- *	(Slackware 2.0 distribution).
- *    And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
- *	with an HP OmniBook 4000 and then a 5500.
- *
- *    It is based on other device drivers and information either written
- *    or supplied by:
- *	James Ashton (jaa101@syseng.anu.edu.au),
- *	Ajay Bakre (bakre@paul.rutgers.edu),
- *	Donald Becker (becker@super.org),
- *	Jim Binkley <jrb@cs.pdx.edu>,
- *	Loeke Brederveld <lbrederv@wavelan.com>,
- *	Allan Creighton (allanc@cs.su.oz.au),
- *	Brent Elphick <belphick@uwaterloo.ca>,
- *	Joe Finney <joe@comp.lancs.ac.uk>,
- *	Matthew Geier (matthew@cs.su.oz.au),
- *	Remo di Giovanni (remo@cs.su.oz.au),
- *	Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
- *	David Hinds <dahinds@users.sourceforge.net>,
- *	Jan Hoogendoorn (c/o marteijn@lucent.com),
- *      Bruce Janson <bruce@cs.usyd.edu.au>,
- *	Anthony D. Joseph <adj@lcs.mit.edu>,
- *	Anders Klemets (klemets@paul.rutgers.edu),
- *	Yunzhou Li <yunzhou@strat.iol.unh.edu>,
- *	Marc Meertens (mmeertens@lucent.com),
- *	Keith Moore,
- *	Robert Morris (rtm@das.harvard.edu),
- *	Ian Parkin (ian@cs.su.oz.au),
- *	John Rosenberg (johnr@cs.su.oz.au),
- *	George Rossi (george@phm.gov.au),
- *	Arthur Scott (arthur@cs.su.oz.au),
- *	Stanislav Sinyagin <stas@isf.ru>
- *	Peter Storey,
- *	Jean Tourrilhes <jt@hpl.hp.com>,
- *	Girish Welling (welling@paul.rutgers.edu)
- *	Clark Woodworth <clark@hiway1.exit109.com>
- *	Yongguang Zhang <ygz@isl.hrl.hac.com>...
- */
-
-/* ------------------------- IMPROVEMENTS ------------------------- */
-/*
- * I proudly present :
- *
- * Changes made in 2.8.22 :
- * ----------------------
- *	- improved wv_set_multicast_list
- *	- catch spurious interrupt
- *	- correct release of the device
- *
- * Changes mades in release :
- * ------------------------
- *	- Reorganisation of the code, function name change
- *	- Creation of private header (wavelan_cs.h)
- *	- Reorganised debug messages
- *	- More comments, history, ...
- *	- Configure earlier (in "insert" instead of "open")
- *        and do things only once
- *	- mmc_init : configure the PSA if not done
- *	- mmc_init : 2.00 detection better code for 2.00 init
- *	- better info at startup
- *	- Correct a HUGE bug (volatile & uncalibrated busy loop)
- *	  in wv_82593_cmd => config speedup
- *	- Stop receiving & power down on close (and power up on open)
- *	  use "ifconfig down" & "ifconfig up ; route add -net ..."
- *	- Send packets : add watchdog instead of pooling
- *	- Receive : check frame wrap around & try to recover some frames
- *	- wavelan_set_multicast_list : avoid reset
- *	- add wireless extensions (ioctl & get_wireless_stats)
- *	  get/set nwid/frequency on fly, info for /proc/net/wireless
- *	- Suppress useless stuff from lp (net_local), but add link
- *	- More inlines
- *	- Lot of others minor details & cleanups
- *
- * Changes made in second release :
- * ------------------------------
- *	- Optimise wv_85893_reconfig stuff, fix potential problems
- *	- Change error values for ioctl
- *	- Non blocking wv_ru_stop() + call wv_reset() in case of problems
- *	- Remove development printk from wavelan_watchdog()
- *	- Remove of the watchdog to wavelan_close instead of wavelan_release
- *	  fix potential problems...
- *	- Start debugging suspend stuff (but it's still a bit weird)
- *	- Debug & optimize dump header/packet in Rx & Tx (debug)
- *	- Use "readb" and "writeb" to be kernel 2.1 compliant
- *	- Better handling of bogus interrupts
- *	- Wireless extension : SETSPY and GETSPY
- *	- Remove old stuff (stats - for those needing it, just ask me...)
- *	- Make wireless extensions optional
- *
- * Changes made in third release :
- * -----------------------------
- *	- cleanups & typos
- *	- modif wireless ext (spy -> only one pointer)
- *	- new private ioctl to set/get quality & level threshold
- *	- Init : correct default value of level threshold for pcmcia
- *	- kill watchdog in hw_reset
- *	- more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
- *	- Add message level (debug stuff in /var/adm/debug & errors not
- *	  displayed at console and still in /var/adm/messages)
- *
- * Changes made in fourth release :
- * ------------------------------
- *	- multicast support (yes !) thanks to Yongguang Zhang.
- *
- * Changes made in fifth release (2.9.0) :
- * -------------------------------------
- *	- Revisited multicast code (it was mostly wrong).
- *	- protect code in wv_82593_reconfig with dev->tbusy (oups !)
- *
- * Changes made in sixth release (2.9.1a) :
- * --------------------------------------
- *	- Change the detection code for multi manufacturer code support
- *	- Correct bug (hang kernel) in init when we were "rejecting" a card 
- *
- * Changes made in seventh release (2.9.1b) :
- * ----------------------------------------
- *	- Update to wireless extensions changes
- *	- Silly bug in card initial configuration (psa_conf_status)
- *
- * Changes made in eigth release :
- * -----------------------------
- *	- Small bug in debug code (probably not the last one...)
- *	- 1.2.13 support (thanks to Clark Woodworth)
- *
- * Changes made for release in 2.9.2b :
- * ----------------------------------
- *	- Level threshold is now a standard wireless extension (version 4 !)
- *	- modules parameters types for kernel > 2.1.17
- *	- updated man page
- *	- Others cleanup from David Hinds
- *
- * Changes made for release in 2.9.5 :
- * ---------------------------------
- *	- byte count stats (courtesy of David Hinds)
- *	- Remove dev_tint stuff (courtesy of David Hinds)
- *	- Others cleanup from David Hinds
- *	- Encryption setting from Brent Elphick (thanks a lot !)
- *	- 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
- *
- * Changes made for release in 2.9.6 :
- * ---------------------------------
- *	- fix bug : no longuer disable watchdog in case of bogus interrupt
- *	- increase timeout in config code for picky hardware
- *	- mask unused bits in status (Wireless Extensions)
- *
- * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
- * -----------------------------------------------------------------
- *	- Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
- *	- PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
- *	- Better initialisation of the i82593 controller
- *	  from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
- *
- * Changes made for release in 3.0.10 :
- * ----------------------------------
- *	- Fix eject "hang" of the driver under 2.2.X :
- *		o create wv_flush_stale_links()
- *		o Rename wavelan_release to wv_pcmcia_release & move up
- *		o move unregister_netdev to wavelan_detach()
- *		o wavelan_release() no longer call wavelan_detach()
- *		o Suppress "release" timer
- *		o Other cleanups & fixes
- *	- New MAC address in the probe
- *	- Reorg PSA_CRC code (endian neutral & cleaner)
- *	- Correct initialisation of the i82593 from Lucent manual
- *	- Put back the watchdog, with larger timeout
- *	- TRANSMIT_NO_CRC is a "normal" error, so recover from it
- *	  from Derrick J Brashear <shadow@dementia.org>
- *	- Better handling of TX and RX normal failure conditions
- *	- #ifdef out all the roaming code
- *	- Add ESSID & "AP current address" ioctl stubs
- *	- General cleanup of the code
- *
- * Changes made for release in 3.0.13 :
- * ----------------------------------
- *	- Re-enable compilation of roaming code by default, but with
- *	  do_roaming = 0
- *	- Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
- *	  at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
- *	- Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
- *
- * Changes made for release in 3.0.15 :
- * ----------------------------------
- *	- Change e-mail and web page addresses
- *	- Watchdog timer is now correctly expressed in HZ, not in jiffies
- *	- Add channel number to the list of frequencies in range
- *	- Add the (short) list of bit-rates in range
- *	- Developp a new sensitivity... (sens.value & sens.fixed)
- *
- * Changes made for release in 3.1.2 :
- * ---------------------------------
- *	- Fix check for root permission (break instead of exit)
- *	- New nwid & encoding setting (Wireless Extension 9)
- *
- * Changes made for release in 3.1.12 :
- * ----------------------------------
- *	- reworked wv_82593_cmd to avoid using the IRQ handler and doing
- *	  ugly things with interrupts.
- *	- Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
- *	- Update to new network API (softnet - 2.3.43) :
- *		o replace dev->tbusy (David + me)
- *		o replace dev->tstart (David + me)
- *		o remove dev->interrupt (David)
- *		o add SMP locking via spinlock in splxx (me)
- *		o add spinlock in interrupt handler (me)
- *		o use kernel watchdog instead of ours (me)
- *		o verify that all the changes make sense and work (me)
- *	- Re-sync kernel/pcmcia versions (not much actually)
- *	- A few other cleanups (David & me)...
- *
- * Changes made for release in 3.1.22 :
- * ----------------------------------
- *	- Check that SMP works, remove annoying log message
- *
- * Changes made for release in 3.1.24 :
- * ----------------------------------
- *	- Fix unfrequent card lockup when watchdog was reseting the hardware :
- *		o control first busy loop in wv_82593_cmd()
- *		o Extend spinlock protection in wv_hw_config()
- *
- * Changes made for release in 3.1.33 :
- * ----------------------------------
- *	- Optional use new driver API for Wireless Extensions :
- *		o got rid of wavelan_ioctl()
- *		o use a bunch of iw_handler instead
- *
- * Changes made for release in 3.2.1 :
- * ---------------------------------
- *	- Set dev->trans_start to avoid filling the logs
- *		(and generating useless abort commands)
- *	- Avoid deadlocks in mmc_out()/mmc_in()
- *
- * Wishes & dreams:
- * ----------------
- *	- Cleanup and integrate the roaming code
- *	  (std debug, set DomainID, decay avg and co...)
- */
-
-/***************************** INCLUDES *****************************/
-
-/* Linux headers that we need */
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/spinlock.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/bitops.h>
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/system.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/fcntl.h>
-#include <linux/ethtool.h>
-#include <linux/wireless.h>		/* Wireless extensions */
-#include <net/iw_handler.h>		/* New driver API */
-
-/* Pcmcia headers that we need */
-#include <pcmcia/cs_types.h>
-#include <pcmcia/cs.h>
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ds.h>
-
-/* Wavelan declarations */
-#include "i82593.h"	/* Definitions for the Intel chip */
-
-#include "wavelan_cs.h"	/* Others bits of the hardware */
-
-/************************** DRIVER OPTIONS **************************/
-/*
- * `#define' or `#undef' the following constant to change the behaviour
- * of the driver...
- */
-#define WAVELAN_ROAMING		/* Include experimental roaming code */
-#undef WAVELAN_ROAMING_EXT	/* Enable roaming wireless extensions */
-#undef SET_PSA_CRC		/* Set the CRC in PSA (slower) */
-#define USE_PSA_CONFIG		/* Use info from the PSA */
-#undef EEPROM_IS_PROTECTED	/* Doesn't seem to be necessary */
-#define MULTICAST_AVOID		/* Avoid extra multicast (I'm sceptical) */
-#undef SET_MAC_ADDRESS		/* Experimental */
-
-/* Warning : these stuff will slow down the driver... */
-#define WIRELESS_SPY		/* Enable spying addresses */
-#undef HISTOGRAM		/* Enable histogram of sig level... */
-
-/****************************** DEBUG ******************************/
-
-#undef DEBUG_MODULE_TRACE	/* Module insertion/removal */
-#undef DEBUG_CALLBACK_TRACE	/* Calls made by Linux */
-#undef DEBUG_INTERRUPT_TRACE	/* Calls to handler */
-#undef DEBUG_INTERRUPT_INFO	/* type of interrupt & so on */
-#define DEBUG_INTERRUPT_ERROR	/* problems */
-#undef DEBUG_CONFIG_TRACE	/* Trace the config functions */
-#undef DEBUG_CONFIG_INFO	/* What's going on... */
-#define DEBUG_CONFIG_ERRORS	/* Errors on configuration */
-#undef DEBUG_TX_TRACE		/* Transmission calls */
-#undef DEBUG_TX_INFO		/* Header of the transmitted packet */
-#undef DEBUG_TX_FAIL		/* Normal failure conditions */
-#define DEBUG_TX_ERROR		/* Unexpected conditions */
-#undef DEBUG_RX_TRACE		/* Transmission calls */
-#undef DEBUG_RX_INFO		/* Header of the transmitted packet */
-#undef DEBUG_RX_FAIL		/* Normal failure conditions */
-#define DEBUG_RX_ERROR		/* Unexpected conditions */
-#undef DEBUG_PACKET_DUMP	/* Dump packet on the screen */
-#undef DEBUG_IOCTL_TRACE	/* Misc call by Linux */
-#undef DEBUG_IOCTL_INFO		/* Various debug info */
-#define DEBUG_IOCTL_ERROR	/* What's going wrong */
-#define DEBUG_BASIC_SHOW	/* Show basic startup info */
-#undef DEBUG_VERSION_SHOW	/* Print version info */
-#undef DEBUG_PSA_SHOW		/* Dump psa to screen */
-#undef DEBUG_MMC_SHOW		/* Dump mmc to screen */
-#undef DEBUG_SHOW_UNUSED	/* Show also unused fields */
-#undef DEBUG_I82593_SHOW	/* Show i82593 status */
-#undef DEBUG_DEVICE_SHOW	/* Show device parameters */
-
-/************************ CONSTANTS & MACROS ************************/
-
-#ifdef DEBUG_VERSION_SHOW
-static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n";
-#endif
-
-/* Watchdog temporisation */
-#define	WATCHDOG_JIFFIES	(256*HZ/100)
-
-/* Fix a bug in some old wireless extension definitions */
-#ifndef IW_ESSID_MAX_SIZE
-#define IW_ESSID_MAX_SIZE	32
-#endif
-
-/* ------------------------ PRIVATE IOCTL ------------------------ */
-
-#define SIOCSIPQTHR	SIOCIWFIRSTPRIV		/* Set quality threshold */
-#define SIOCGIPQTHR	SIOCIWFIRSTPRIV + 1	/* Get quality threshold */
-#define SIOCSIPROAM     SIOCIWFIRSTPRIV + 2	/* Set roaming state */
-#define SIOCGIPROAM     SIOCIWFIRSTPRIV + 3	/* Get roaming state */
-
-#define SIOCSIPHISTO	SIOCIWFIRSTPRIV + 4	/* Set histogram ranges */
-#define SIOCGIPHISTO	SIOCIWFIRSTPRIV + 5	/* Get histogram values */
-
-/*************************** WaveLAN Roaming  **************************/
-#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
-
-#define WAVELAN_ROAMING_DEBUG	 0	/* 1 = Trace of handover decisions */
-					/* 2 = Info on each beacon rcvd... */
-#define MAX_WAVEPOINTS		7	/* Max visible at one time */
-#define WAVEPOINT_HISTORY	5	/* SNR sample history slow search */
-#define WAVEPOINT_FAST_HISTORY	2	/* SNR sample history fast search */
-#define SEARCH_THRESH_LOW	10	/* SNR to enter cell search */
-#define SEARCH_THRESH_HIGH	13	/* SNR to leave cell search */
-#define WAVELAN_ROAMING_DELTA	1	/* Hysteresis value (+/- SNR) */
-#define CELL_TIMEOUT		2*HZ	/* in jiffies */
-
-#define FAST_CELL_SEARCH	1	/* Boolean values... */
-#define NWID_PROMISC		1	/* for code clarity. */
-
-typedef struct wavepoint_beacon
-{
-  unsigned char		dsap,		/* Unused */
-			ssap,		/* Unused */
-			ctrl,		/* Unused */
-			O,U,I,		/* Unused */
-			spec_id1,	/* Unused */
-			spec_id2,	/* Unused */
-			pdu_type,	/* Unused */
-			seq;		/* WavePoint beacon sequence number */
-  __be16		domain_id,	/* WavePoint Domain ID */
-			nwid;		/* WavePoint NWID */
-} wavepoint_beacon;
-
-typedef struct wavepoint_history
-{
-  unsigned short	nwid;		/* WavePoint's NWID */
-  int			average_slow;	/* SNR running average */
-  int			average_fast;	/* SNR running average */
-  unsigned char	  sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
-  unsigned char		qualptr;	/* Index into ringbuffer */
-  unsigned char		last_seq;	/* Last seq. no seen for WavePoint */
-  struct wavepoint_history *next;	/* Next WavePoint in table */
-  struct wavepoint_history *prev;	/* Previous WavePoint in table */
-  unsigned long		last_seen;	/* Time of last beacon recvd, jiffies */
-} wavepoint_history;
-
-struct wavepoint_table
-{
-  wavepoint_history	*head;		/* Start of ringbuffer */
-  int			num_wavepoints;	/* No. of WavePoints visible */
-  unsigned char		locked;		/* Table lock */
-};
-
-#endif	/* WAVELAN_ROAMING */
-
-/****************************** TYPES ******************************/
-
-/* Shortcuts */
-typedef struct iw_statistics	iw_stats;
-typedef struct iw_quality	iw_qual;
-typedef struct iw_freq		iw_freq;
-typedef struct net_local	net_local;
-typedef struct timer_list	timer_list;
-
-/* Basic types */
-typedef u_char		mac_addr[WAVELAN_ADDR_SIZE];	/* Hardware address */
-
-/*
- * Static specific data for the interface.
- *
- * For each network interface, Linux keep data in two structure. "device"
- * keep the generic data (same format for everybody) and "net_local" keep
- * the additional specific data.
- */
-struct net_local
-{
-  dev_node_t 	node;		/* ???? What is this stuff ???? */
-  struct net_device *	dev;		/* Reverse link... */
-  spinlock_t	spinlock;	/* Serialize access to the hardware (SMP) */
-  struct pcmcia_device *	link;		/* pcmcia structure */
-  int		nresets;	/* Number of hw resets */
-  u_char	configured;	/* If it is configured */
-  u_char	reconfig_82593;	/* Need to reconfigure the controller */
-  u_char	promiscuous;	/* Promiscuous mode */
-  u_char	allmulticast;	/* All Multicast mode */
-  int		mc_count;	/* Number of multicast addresses */
-
-  int   	stop;		/* Current i82593 Stop Hit Register */
-  int   	rfp;		/* Last DMA machine receive pointer */
-  int		overrunning;	/* Receiver overrun flag */
-
-  iw_stats	wstats;		/* Wireless specific stats */
-
-  struct iw_spy_data	spy_data;
-  struct iw_public_data	wireless_data;
-
-#ifdef HISTOGRAM
-  int		his_number;		/* Number of intervals */
-  u_char	his_range[16];		/* Boundaries of interval ]n-1; n] */
-  u_long	his_sum[16];		/* Sum in interval */
-#endif	/* HISTOGRAM */
-#ifdef WAVELAN_ROAMING
-  u_long	domain_id;	/* Domain ID we lock on for roaming */
-  int		filter_domains;	/* Check Domain ID of beacon found */
- struct wavepoint_table	wavepoint_table;	/* Table of visible WavePoints*/
-  wavepoint_history *	curr_point;		/* Current wavepoint */
-  int			cell_search;		/* Searching for new cell? */
-  struct timer_list	cell_timer;		/* Garbage collection */
-#endif	/* WAVELAN_ROAMING */
-  void __iomem *mem;
-};
-
-/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
-static inline u_char		/* data */
-	hasr_read(u_long);	/* Read the host interface : base address */
-static void
-	hacr_write(u_long,	/* Write to host interface : base address */
-		   u_char),	/* data */
-	hacr_write_slow(u_long,
-		   u_char);
-static void
-	psa_read(struct net_device *,	/* Read the Parameter Storage Area */
-		 int,		/* offset in PSA */
-		 u_char *,	/* buffer to fill */
-		 int),		/* size to read */
-	psa_write(struct net_device *,	/* Write to the PSA */
-		  int,		/* Offset in psa */
-		  u_char *,	/* Buffer in memory */
-		  int);		/* Length of buffer */
-static void
-	mmc_out(u_long,		/* Write 1 byte to the Modem Manag Control */
-		u_short,
-		u_char),
-	mmc_write(u_long,	/* Write n bytes to the MMC */
-		  u_char,
-		  u_char *,
-		  int);
-static u_char			/* Read 1 byte from the MMC */
-	mmc_in(u_long,
-	       u_short);
-static void
-	mmc_read(u_long,	/* Read n bytes from the MMC */
-		 u_char,
-		 u_char *,
-		 int),
-	fee_wait(u_long,	/* Wait for frequency EEprom : base address */
-		 int,		/* Base delay to wait for */
-		 int);		/* Number of time to wait */
-static void
-	fee_read(u_long,	/* Read the frequency EEprom : base address */
-		 u_short,	/* destination offset */
-		 u_short *,	/* data buffer */
-		 int);		/* number of registers */
-/* ---------------------- I82593 SUBROUTINES ----------------------- */
-static int
-	wv_82593_cmd(struct net_device *,	/* synchronously send a command to i82593 */ 
-		     char *,
-		     int,
-		     int);
-static inline int
-	wv_diag(struct net_device *);	/* Diagnostique the i82593 */
-static int
-	read_ringbuf(struct net_device *,	/* Read a receive buffer */
-		     int,
-		     char *,
-		     int);
-static void
-	wv_82593_reconfig(struct net_device *);	/* Reconfigure the controller */
-/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
-static void
-	wv_init_info(struct net_device *);	/* display startup info */
-/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
-static iw_stats *
-	wavelan_get_wireless_stats(struct net_device *);
-/* ----------------------- PACKET RECEPTION ----------------------- */
-static int
-	wv_start_of_frame(struct net_device *,	/* Seek beggining of current frame */
-			  int,	/* end of frame */
-			  int);	/* start of buffer */
-static void
-	wv_packet_read(struct net_device *,	/* Read a packet from a frame */
-		       int,
-		       int),
-	wv_packet_rcv(struct net_device *);	/* Read all packets waiting */
-/* --------------------- PACKET TRANSMISSION --------------------- */
-static void
-	wv_packet_write(struct net_device *,	/* Write a packet to the Tx buffer */
-			void *,
-			short);
-static netdev_tx_t
-	wavelan_packet_xmit(struct sk_buff *,	/* Send a packet */
-			    struct net_device *);
-/* -------------------- HARDWARE CONFIGURATION -------------------- */
-static int
-	wv_mmc_init(struct net_device *);	/* Initialize the modem */
-static int
-	wv_ru_stop(struct net_device *),	/* Stop the i82593 receiver unit */
-	wv_ru_start(struct net_device *);	/* Start the i82593 receiver unit */
-static int
-	wv_82593_config(struct net_device *);	/* Configure the i82593 */
-static int
-	wv_pcmcia_reset(struct net_device *);	/* Reset the pcmcia interface */
-static int
-	wv_hw_config(struct net_device *);	/* Reset & configure the whole hardware */
-static void
-	wv_hw_reset(struct net_device *);	/* Same, + start receiver unit */
-static int
-	wv_pcmcia_config(struct pcmcia_device *);	/* Configure the pcmcia interface */
-static void
-	wv_pcmcia_release(struct pcmcia_device *);/* Remove a device */
-/* ---------------------- INTERRUPT HANDLING ---------------------- */
-static irqreturn_t
-	wavelan_interrupt(int,	/* Interrupt handler */
-			  void *);
-static void
-	wavelan_watchdog(struct net_device *);	/* Transmission watchdog */
-/* ------------------- CONFIGURATION CALLBACKS ------------------- */
-static int
-	wavelan_open(struct net_device *),		/* Open the device */
-	wavelan_close(struct net_device *);	/* Close the device */
-static void
-	wavelan_detach(struct pcmcia_device *p_dev);	/* Destroy a removed device */
-
-/**************************** VARIABLES ****************************/
-
-/*
- * Parameters that can be set with 'insmod'
- * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
- */
-
-/* Shared memory speed, in ns */
-static int	mem_speed = 0;
-
-/* New module interface */
-module_param(mem_speed, int, 0);
-
-#ifdef WAVELAN_ROAMING		/* Conditional compile, see above in options */
-/* Enable roaming mode ? No ! Please keep this to 0 */
-static int	do_roaming = 0;
-module_param(do_roaming, bool, 0);
-#endif	/* WAVELAN_ROAMING */
-
-MODULE_LICENSE("GPL");
-
-#endif	/* WAVELAN_CS_P_H */
-