summaryrefslogtreecommitdiffstats
path: root/drivers/net
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2014-08-21 21:53:15 -0700
committerDavid S. Miller <davem@davemloft.net>2014-08-21 21:53:15 -0700
commit215a004c61d2f12b130aeb2a9f609275ed6f61bb (patch)
tree475fcced95418aaf549bfdbd922f4b2331646281 /drivers/net
parent29aaee65bc28cc75281dc9fe0998cc5e10ac37f9 (diff)
parent8ce261d0bb491da957278cdcba207791f329d1da (diff)
Merge tag 'linux-can-fixes-for-3.17-20140821' of git://gitorious.org/linux-can/linux-can
Marc Kleine-Budde says: ==================== pull-request: can 2014-08-21 The first patch is from Mirza Krak, it fixes the initialization of the hardware in the sja1000 driver. The next patch is contributed by Dan Carpenter, it fixes the error handling in the c_can's probe function. Then there are two patches for the flexcan driver, one by Alexander Stein, which fixes the resetting of the bus error interrupt mask, the other one by Sebastian Andrzej Siewior which adds an additional error state transition message. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net')
-rw-r--r--drivers/net/can/c_can/c_can_platform.c2
-rw-r--r--drivers/net/can/flexcan.c9
-rw-r--r--drivers/net/can/sja1000/sja1000.c62
3 files changed, 43 insertions, 30 deletions
diff --git a/drivers/net/can/c_can/c_can_platform.c b/drivers/net/can/c_can/c_can_platform.c
index 5dede6e6437..109cb44291f 100644
--- a/drivers/net/can/c_can/c_can_platform.c
+++ b/drivers/net/can/c_can/c_can_platform.c
@@ -280,7 +280,7 @@ static int c_can_plat_probe(struct platform_device *pdev)
priv->raminit_ctrlreg = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
- if (IS_ERR(priv->raminit_ctrlreg) || priv->instance < 0)
+ if (!priv->raminit_ctrlreg || priv->instance < 0)
dev_info(&pdev->dev, "control memory is not used for raminit\n");
else
priv->raminit = c_can_hw_raminit_ti;
diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c
index f425ec2c783..944aa5d3af6 100644
--- a/drivers/net/can/flexcan.c
+++ b/drivers/net/can/flexcan.c
@@ -549,6 +549,13 @@ static void do_state(struct net_device *dev,
/* process state changes depending on the new state */
switch (new_state) {
+ case CAN_STATE_ERROR_WARNING:
+ netdev_dbg(dev, "Error Warning\n");
+ cf->can_id |= CAN_ERR_CRTL;
+ cf->data[1] = (bec.txerr > bec.rxerr) ?
+ CAN_ERR_CRTL_TX_WARNING :
+ CAN_ERR_CRTL_RX_WARNING;
+ break;
case CAN_STATE_ERROR_ACTIVE:
netdev_dbg(dev, "Error Active\n");
cf->can_id |= CAN_ERR_PROT;
@@ -852,6 +859,8 @@ static int flexcan_chip_start(struct net_device *dev)
if (priv->devtype_data->features & FLEXCAN_HAS_BROKEN_ERR_STATE ||
priv->can.ctrlmode & CAN_CTRLMODE_BERR_REPORTING)
reg_ctrl |= FLEXCAN_CTRL_ERR_MSK;
+ else
+ reg_ctrl &= ~FLEXCAN_CTRL_ERR_MSK;
/* save for later use */
priv->reg_ctrl_default = reg_ctrl;
diff --git a/drivers/net/can/sja1000/sja1000.c b/drivers/net/can/sja1000/sja1000.c
index d1692154ed1..b27ac6074af 100644
--- a/drivers/net/can/sja1000/sja1000.c
+++ b/drivers/net/can/sja1000/sja1000.c
@@ -172,6 +172,35 @@ static void set_normal_mode(struct net_device *dev)
netdev_err(dev, "setting SJA1000 into normal mode failed!\n");
}
+/*
+ * initialize SJA1000 chip:
+ * - reset chip
+ * - set output mode
+ * - set baudrate
+ * - enable interrupts
+ * - start operating mode
+ */
+static void chipset_init(struct net_device *dev)
+{
+ struct sja1000_priv *priv = netdev_priv(dev);
+
+ /* set clock divider and output control register */
+ priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
+
+ /* set acceptance filter (accept all) */
+ priv->write_reg(priv, SJA1000_ACCC0, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC1, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC2, 0x00);
+ priv->write_reg(priv, SJA1000_ACCC3, 0x00);
+
+ priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
+ priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
+
+ priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
+}
+
static void sja1000_start(struct net_device *dev)
{
struct sja1000_priv *priv = netdev_priv(dev);
@@ -180,6 +209,10 @@ static void sja1000_start(struct net_device *dev)
if (priv->can.state != CAN_STATE_STOPPED)
set_reset_mode(dev);
+ /* Initialize chip if uninitialized at this stage */
+ if (!(priv->read_reg(priv, SJA1000_CDR) & CDR_PELICAN))
+ chipset_init(dev);
+
/* Clear error counters and error code capture */
priv->write_reg(priv, SJA1000_TXERR, 0x0);
priv->write_reg(priv, SJA1000_RXERR, 0x0);
@@ -237,35 +270,6 @@ static int sja1000_get_berr_counter(const struct net_device *dev,
}
/*
- * initialize SJA1000 chip:
- * - reset chip
- * - set output mode
- * - set baudrate
- * - enable interrupts
- * - start operating mode
- */
-static void chipset_init(struct net_device *dev)
-{
- struct sja1000_priv *priv = netdev_priv(dev);
-
- /* set clock divider and output control register */
- priv->write_reg(priv, SJA1000_CDR, priv->cdr | CDR_PELICAN);
-
- /* set acceptance filter (accept all) */
- priv->write_reg(priv, SJA1000_ACCC0, 0x00);
- priv->write_reg(priv, SJA1000_ACCC1, 0x00);
- priv->write_reg(priv, SJA1000_ACCC2, 0x00);
- priv->write_reg(priv, SJA1000_ACCC3, 0x00);
-
- priv->write_reg(priv, SJA1000_ACCM0, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM1, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM2, 0xFF);
- priv->write_reg(priv, SJA1000_ACCM3, 0xFF);
-
- priv->write_reg(priv, SJA1000_OCR, priv->ocr | OCR_MODE_NORMAL);
-}
-
-/*
* transmit a CAN message
* message layout in the sk_buff should be like this:
* xx xx xx xx ff ll 00 11 22 33 44 55 66 77