diff options
| author | Christophe Ricard <christophe.ricard@gmail.com> | 2014-03-25 06:51:47 +0100 |
|---|---|---|
| committer | Samuel Ortiz <sameo@linux.intel.com> | 2014-04-22 00:37:25 +0200 |
| commit | 68957303f44a501af5cf37913208a2acaa6bcdf1 (patch) | |
| tree | 39c6c737cd7feb3eb3facc37de2cf9dda7545465 /drivers/nfc/Makefile | |
| parent | 321d03c86732e45f5f33ad0db5b68e2e1364acb9 (diff) | |
NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip
Add driver for STMicroelectronics ST21NFCA NFC controller.
ST21NFCA is using HCI protocol, shdlc as LLC layer & I2C as
communication protocol.
Adding support for Reader/Writer mode with Tag type 1/2/3/4 A & B.
It is using proprietary gate 15 for ISO14443-3 such as type 1 &
type 2 tags. It is using proprietary gate 14 for type F tags.
ST21NFCA_DEVICE_MGNT_GATE gives access to proprietary CLF configuration.
Standard gate for ISO14443-4 A (13) & B (11) are also used.
ST21NFCA specific mecanism:
One particular point to notice for the data handling is that frame
does not contain any length value. Therefore the i2c part of this driver
is managing the reception with a read length sequence until the end of
frame (0x7e) is reached.
In order to avoid conflict between sof & eof a mecanism
called byte stuffing concist of an escape byte (0x7d) insertion before
special byte (0x7e, 0x7d). The special byte is then xored with 0x20.
In this driver, When data are available in the CLF, the interrupt
gpio is driven to active state and triggered an interrupt.
Once the i2c_master_recv start, the interrupt gpio is driven to idle
state until its complete. If the frame is incomplete or data are still
available, interrupts will be triggered again.
Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Diffstat (limited to 'drivers/nfc/Makefile')
| -rw-r--r-- | drivers/nfc/Makefile | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/nfc/Makefile b/drivers/nfc/Makefile index ae42a3fa60c..23225b0287f 100644 --- a/drivers/nfc/Makefile +++ b/drivers/nfc/Makefile @@ -11,5 +11,6 @@ obj-$(CONFIG_NFC_SIM) += nfcsim.o obj-$(CONFIG_NFC_PORT100) += port100.o obj-$(CONFIG_NFC_MRVL) += nfcmrvl/ obj-$(CONFIG_NFC_TRF7970A) += trf7970a.o +obj-$(CONFIG_NFC_ST21NFCA) += st21nfca/ ccflags-$(CONFIG_NFC_DEBUG) := -DDEBUG |