Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 1747 insertions, 0 deletions

diff --git a/drivers/pci/hotplug/ibmphp_pci.c b/drivers/pci/hotplug/ibmphp_pci.c
new file mode 100644
index 00000000000..2335fac65fb
--- /dev/null
+++ b/drivers/pci/hotplug/ibmphp_pci.c
@@ -0,0 +1,1747 @@
+/*
+ * IBM Hot Plug Controller Driver
+ * 
+ * Written By: Irene Zubarev, IBM Corporation
+ * 
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001,2002 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT.  See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/list.h>
+#include "ibmphp.h"
+
+
+static int configure_device(struct pci_func *);
+static int configure_bridge(struct pci_func **, u8);
+static struct res_needed *scan_behind_bridge(struct pci_func *, u8);
+static int add_new_bus (struct bus_node *, struct resource_node *, struct resource_node *, struct resource_node *, u8);
+static u8 find_sec_number (u8 primary_busno, u8 slotno);
+
+/*
+ * NOTE..... If BIOS doesn't provide default routing, we assign:
+ * 9 for SCSI, 10 for LAN adapters, and 11 for everything else. 
+ * If adapter is bridged, then we assign 11 to it and devices behind it.
+ * We also assign the same irq numbers for multi function devices.
+ * These are PIC mode, so shouldn't matter n.e.ways (hopefully)
+ */
+static void assign_alt_irq (struct pci_func * cur_func, u8 class_code)
+{
+	int j;
+	for (j = 0; j < 4; j++) {
+		if (cur_func->irq[j] == 0xff) {
+			switch (class_code) {
+				case PCI_BASE_CLASS_STORAGE:
+					cur_func->irq[j] = SCSI_IRQ;
+					break;
+				case PCI_BASE_CLASS_NETWORK:
+					cur_func->irq[j] = LAN_IRQ;
+					break;
+				default:
+					cur_func->irq[j] = OTHER_IRQ;
+					break;
+			}
+		}
+	}
+}
+
+/*
+ * Configures the device to be added (will allocate needed resources if it
+ * can), the device can be a bridge or a regular pci device, can also be
+ * multi-functional
+ * 
+ * Input: function to be added
+ * 
+ * TO DO:  The error case with Multifunction device or multi function bridge,
+ * if there is an error, will need to go through all previous functions and 
+ * unconfigure....or can add some code into unconfigure_card....
+ */
+int ibmphp_configure_card (struct pci_func *func, u8 slotno)
+{
+	u16 vendor_id;
+	u32 class;
+	u8 class_code;
+	u8 hdr_type, device, sec_number;
+	u8 function;
+	struct pci_func *newfunc;	/* for multi devices */
+	struct pci_func *cur_func, *prev_func;
+	int rc, i, j;
+	int cleanup_count;
+	u8 flag;
+	u8 valid_device = 0x00; /* to see if we are able to read from card any device info at all */
+
+	debug ("inside configure_card, func->busno = %x\n", func->busno);
+
+	device = func->device;
+	cur_func = func;
+
+	/* We only get bus and device from IRQ routing table.  So at this point,
+	 * func->busno is correct, and func->device contains only device (at the 5 
+	 * highest bits)
+	 */
+
+	/* For every function on the card */
+	for (function = 0x00; function < 0x08; function++) {
+		unsigned int devfn = PCI_DEVFN(device, function);
+		ibmphp_pci_bus->number = cur_func->busno;
+
+		cur_func->function = function;
+
+		debug ("inside the loop, cur_func->busno = %x, cur_func->device = %x, cur_func->funcion = %x\n",
+			cur_func->busno, cur_func->device, cur_func->function);
+
+		pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+		debug ("vendor_id is %x\n", vendor_id);
+		if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+			/* found correct device!!! */
+			debug ("found valid device, vendor_id = %x\n", vendor_id);
+
+			++valid_device;
+
+			/* header: x x x x x x x x
+			 *         | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge
+			 *         |_=> 0 = single function device, 1 = multi-function device
+			 */
+
+			pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+			pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+			class_code = class >> 24;
+			debug ("hrd_type = %x, class = %x, class_code %x\n", hdr_type, class, class_code);
+			class >>= 8;	/* to take revision out, class = class.subclass.prog i/f */
+			if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+				err ("The device %x is VGA compatible and as is not supported for hot plugging. "
+				     "Please choose another device.\n", cur_func->device);
+				return -ENODEV;
+			} else if (class == PCI_CLASS_DISPLAY_VGA) {
+				err ("The device %x is not supported for hot plugging. "
+				     "Please choose another device.\n", cur_func->device);
+				return -ENODEV;
+			}
+			switch (hdr_type) {
+				case PCI_HEADER_TYPE_NORMAL:
+					debug ("single device case.... vendor id = %x, hdr_type = %x, class = %x\n", vendor_id, hdr_type, class);
+					assign_alt_irq (cur_func, class_code);
+					if ((rc = configure_device (cur_func)) < 0) {
+						/* We need to do this in case some other BARs were properly inserted */
+						err ("was not able to configure devfunc %x on bus %x.\n",
+						     cur_func->device, cur_func->busno);
+						cleanup_count = 6;
+						goto error;
+					}	
+					cur_func->next = NULL;
+					function = 0x8;
+					break;
+				case PCI_HEADER_TYPE_MULTIDEVICE:
+					assign_alt_irq (cur_func, class_code);
+					if ((rc = configure_device (cur_func)) < 0) {
+						/* We need to do this in case some other BARs were properly inserted */
+						err ("was not able to configure devfunc %x on bus %x...bailing out\n",
+						     cur_func->device, cur_func->busno);
+						cleanup_count = 6;
+						goto error;
+					}
+					newfunc = kmalloc(sizeof(*newfunc), GFP_KERNEL);
+					if (!newfunc) {
+						err ("out of system memory\n");
+						return -ENOMEM;
+					}
+					memset (newfunc, 0, sizeof (struct pci_func));
+					newfunc->busno = cur_func->busno;
+					newfunc->device = device;
+					cur_func->next = newfunc;
+					cur_func = newfunc;
+					for (j = 0; j < 4; j++)
+						newfunc->irq[j] = cur_func->irq[j];
+					break;
+				case PCI_HEADER_TYPE_MULTIBRIDGE:
+					class >>= 8;
+					if (class != PCI_CLASS_BRIDGE_PCI) {
+						err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. "
+						     "Please insert another card.\n", cur_func->device);
+						return -ENODEV;
+					}
+					assign_alt_irq (cur_func, class_code);
+					rc = configure_bridge (&cur_func, slotno);
+					if (rc == -ENODEV) {
+						err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n");
+						err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device);
+						return rc;
+					}
+					if (rc) {
+						/* We need to do this in case some other BARs were properly inserted */
+						err ("was not able to hot-add PPB properly.\n");
+						func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+						cleanup_count = 2;
+						goto error;
+					}
+
+					pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+					flag = FALSE;
+					for (i = 0; i < 32; i++) {
+						if (func->devices[i]) {
+							newfunc = kmalloc(sizeof(*newfunc), GFP_KERNEL);
+							if (!newfunc) {
+								err ("out of system memory\n");
+								return -ENOMEM;
+							}
+							memset (newfunc, 0, sizeof (struct pci_func));
+							newfunc->busno = sec_number;
+							newfunc->device = (u8) i;
+							for (j = 0; j < 4; j++)
+								newfunc->irq[j] = cur_func->irq[j];
+
+							if (flag) {
+								for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+								prev_func->next = newfunc;
+							} else
+								cur_func->next = newfunc;
+
+							rc = ibmphp_configure_card (newfunc, slotno);
+							/* This could only happen if kmalloc failed */
+							if (rc) {
+								/* We need to do this in case bridge itself got configured properly, but devices behind it failed */
+								func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+								cleanup_count = 2;
+								goto error;
+							}
+							flag = TRUE;
+						}
+					}
+
+					newfunc = kmalloc(sizeof(*newfunc), GFP_KERNEL);
+					if (!newfunc) {
+						err ("out of system memory\n");
+						return -ENOMEM;
+					}
+					memset (newfunc, 0, sizeof (struct pci_func));
+					newfunc->busno = cur_func->busno;
+					newfunc->device = device;
+					for (j = 0; j < 4; j++)
+						newfunc->irq[j] = cur_func->irq[j];
+					for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+					prev_func->next = newfunc;
+					cur_func = newfunc;
+					break;
+				case PCI_HEADER_TYPE_BRIDGE:
+					class >>= 8;
+					debug ("class now is %x\n", class);
+					if (class != PCI_CLASS_BRIDGE_PCI) {
+						err ("This %x is not PCI-to-PCI bridge, and as is not supported for hot-plugging. "
+						     "Please insert another card.\n", cur_func->device);
+						return -ENODEV;
+					}
+
+					assign_alt_irq (cur_func, class_code);
+
+					debug ("cur_func->busno b4 configure_bridge is %x\n", cur_func->busno);
+					rc = configure_bridge (&cur_func, slotno);
+					if (rc == -ENODEV) {
+						err ("You chose to insert Single Bridge, or nested bridges, this is not supported...\n");
+						err ("Bus %x, devfunc %x\n", cur_func->busno, cur_func->device);
+						return rc;
+					}
+					if (rc) {
+						/* We need to do this in case some other BARs were properly inserted */
+						func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+						err ("was not able to hot-add PPB properly.\n");
+						cleanup_count = 2;
+						goto error;
+					}
+					debug ("cur_func->busno = %x, device = %x, function = %x\n",
+						cur_func->busno, device, function);
+					pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+					debug ("after configuring bridge..., sec_number = %x\n", sec_number);
+					flag = FALSE;
+					for (i = 0; i < 32; i++) {
+						if (func->devices[i]) {
+							debug ("inside for loop, device is %x\n", i);
+							newfunc = kmalloc(sizeof(*newfunc), GFP_KERNEL);
+							if (!newfunc) {
+								err (" out of system memory\n");
+								return -ENOMEM;
+							}
+							memset (newfunc, 0, sizeof (struct pci_func));
+							newfunc->busno = sec_number;
+							newfunc->device = (u8) i;
+							for (j = 0; j < 4; j++)
+								newfunc->irq[j] = cur_func->irq[j];
+
+							if (flag) {
+								for (prev_func = cur_func; prev_func->next; prev_func = prev_func->next) ;
+								prev_func->next = newfunc;
+							} else
+								cur_func->next = newfunc;
+
+							rc = ibmphp_configure_card (newfunc, slotno);
+
+							/* Again, this case should not happen... For complete paranoia, will need to call remove_bus */
+							if (rc) {
+								/* We need to do this in case some other BARs were properly inserted */
+								func->bus = 1; /* To indicate to the unconfigure function that this is a PPB */
+								cleanup_count = 2;
+								goto error;
+							}
+							flag = TRUE;
+						}
+					}
+
+					function = 0x8;
+					break;
+				default:
+					err ("MAJOR PROBLEM!!!!, header type not supported? %x\n", hdr_type);
+					return -ENXIO;
+					break;
+			}	/* end of switch */
+		}	/* end of valid device */
+	}	/* end of for */
+
+	if (!valid_device) {
+		err ("Cannot find any valid devices on the card.  Or unable to read from card.\n");
+		return -ENODEV;
+	}
+
+	return 0;
+
+error:
+	for (i = 0; i < cleanup_count; i++) {
+		if (cur_func->io[i]) {
+			ibmphp_remove_resource (cur_func->io[i]);
+			cur_func->io[i] = NULL;
+		} else if (cur_func->pfmem[i]) {
+			ibmphp_remove_resource (cur_func->pfmem[i]);
+			cur_func->pfmem[i] = NULL;
+		} else if (cur_func->mem[i]) {
+			ibmphp_remove_resource (cur_func->mem[i]);
+			cur_func->mem[i] = NULL;
+		}
+	}
+	return rc;
+}
+
+/*
+ * This function configures the pci BARs of a single device.  
+ * Input: pointer to the pci_func
+ * Output: configured PCI, 0, or error
+ */
+static int configure_device (struct pci_func *func)
+{
+	u32 bar[6];
+	u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		PCI_BASE_ADDRESS_2,
+		PCI_BASE_ADDRESS_3,
+		PCI_BASE_ADDRESS_4,
+		PCI_BASE_ADDRESS_5,
+		0
+	};
+	u8 irq;
+	int count;
+	int len[6];
+	struct resource_node *io[6];
+	struct resource_node *mem[6];
+	struct resource_node *mem_tmp;
+	struct resource_node *pfmem[6];
+	unsigned int devfn;
+
+	debug ("%s - inside\n", __FUNCTION__);
+
+	devfn = PCI_DEVFN(func->device, func->function);
+	ibmphp_pci_bus->number = func->busno;
+
+	for (count = 0; address[count]; count++) {	/* for 6 BARs */
+
+		/* not sure if i need this.  per scott, said maybe need smth like this
+		   if devices don't adhere 100% to the spec, so don't want to write
+		   to the reserved bits
+
+		pcibios_read_config_byte(cur_func->busno, cur_func->device, 
+		PCI_BASE_ADDRESS_0 + 4 * count, &tmp);
+		if (tmp & 0x01) // IO
+			pcibios_write_config_dword(cur_func->busno, cur_func->device, 
+			PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFD);
+		else  // Memory
+			pcibios_write_config_dword(cur_func->busno, cur_func->device, 
+			PCI_BASE_ADDRESS_0 + 4 * count, 0xFFFFFFFF);
+		 */
+		pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+		pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+		if (!bar[count])	/* This BAR is not implemented */
+			continue;
+
+		debug ("Device %x BAR %d wants %x\n", func->device, count, bar[count]);
+
+		if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+			/* This is IO */
+			debug ("inside IO SPACE\n");
+
+			len[count] = bar[count] & 0xFFFFFFFC;
+			len[count] = ~len[count] + 1;
+
+			debug ("len[count] in IO %x, count %d\n", len[count], count);
+
+			io[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+
+			if (!io[count]) {
+				err ("out of system memory\n");
+				return -ENOMEM;
+			}
+			memset (io[count], 0, sizeof (struct resource_node));
+			io[count]->type = IO;
+			io[count]->busno = func->busno;
+			io[count]->devfunc = PCI_DEVFN(func->device, func->function);
+			io[count]->len = len[count];
+			if (ibmphp_check_resource(io[count], 0) == 0) {
+				ibmphp_add_resource (io[count]);
+				func->io[count] = io[count];
+			} else {
+				err ("cannot allocate requested io for bus %x device %x function %x len %x\n",
+				     func->busno, func->device, func->function, len[count]);
+				kfree (io[count]);
+				return -EIO;
+			}
+			pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start);
+	
+			/* _______________This is for debugging purposes only_____________________ */ 
+			debug ("b4 writing, the IO address is %x\n", func->io[count]->start);
+			pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+			debug ("after writing.... the start address is %x\n", bar[count]);
+			/* _________________________________________________________________________*/
+
+		} else {
+			/* This is Memory */
+			if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+				/* pfmem */
+				debug ("PFMEM SPACE\n");
+
+				len[count] = bar[count] & 0xFFFFFFF0;
+				len[count] = ~len[count] + 1;
+
+				debug ("len[count] in PFMEM %x, count %d\n", len[count], count);
+
+				pfmem[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+				if (!pfmem[count]) {
+					err ("out of system memory\n");
+					return -ENOMEM;
+				}
+				memset (pfmem[count], 0, sizeof (struct resource_node));
+				pfmem[count]->type = PFMEM;
+				pfmem[count]->busno = func->busno;
+				pfmem[count]->devfunc = PCI_DEVFN(func->device,
+							func->function);
+				pfmem[count]->len = len[count];
+				pfmem[count]->fromMem = FALSE;
+				if (ibmphp_check_resource (pfmem[count], 0) == 0) {
+					ibmphp_add_resource (pfmem[count]);
+					func->pfmem[count] = pfmem[count];
+				} else {
+					mem_tmp = kmalloc(sizeof(*mem_tmp), GFP_KERNEL);
+					if (!mem_tmp) {
+						err ("out of system memory\n");
+						kfree (pfmem[count]);
+						return -ENOMEM;
+					}
+					memset (mem_tmp, 0, sizeof (struct resource_node));
+					mem_tmp->type = MEM;
+					mem_tmp->busno = pfmem[count]->busno;
+					mem_tmp->devfunc = pfmem[count]->devfunc;
+					mem_tmp->len = pfmem[count]->len;
+					debug ("there's no pfmem... going into mem.\n");
+					if (ibmphp_check_resource (mem_tmp, 0) == 0) {
+						ibmphp_add_resource (mem_tmp);
+						pfmem[count]->fromMem = TRUE;
+						pfmem[count]->rangeno = mem_tmp->rangeno;
+						pfmem[count]->start = mem_tmp->start;
+						pfmem[count]->end = mem_tmp->end;
+						ibmphp_add_pfmem_from_mem (pfmem[count]);
+						func->pfmem[count] = pfmem[count];
+					} else {
+						err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n",
+						     func->busno, func->device, len[count]);
+						kfree (mem_tmp);
+						kfree (pfmem[count]);
+						return -EIO;
+					}
+				}
+
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start);
+
+				/*_______________This is for debugging purposes only______________________________*/				
+				debug ("b4 writing, start address is %x\n", func->pfmem[count]->start);
+				pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+				debug ("after writing, start address is %x\n", bar[count]);
+				/*_________________________________________________________________________________*/
+
+				if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {	/* takes up another dword */
+					debug ("inside the mem 64 case, count %d\n", count);
+					count += 1;
+					/* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+					pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+				}
+			} else {
+				/* regular memory */
+				debug ("REGULAR MEM SPACE\n");
+
+				len[count] = bar[count] & 0xFFFFFFF0;
+				len[count] = ~len[count] + 1;
+
+				debug ("len[count] in Mem %x, count %d\n", len[count], count);
+
+				mem[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+				if (!mem[count]) {
+					err ("out of system memory\n");
+					return -ENOMEM;
+				}
+				memset (mem[count], 0, sizeof (struct resource_node));
+				mem[count]->type = MEM;
+				mem[count]->busno = func->busno;
+				mem[count]->devfunc = PCI_DEVFN(func->device,
+							func->function);
+				mem[count]->len = len[count];
+				if (ibmphp_check_resource (mem[count], 0) == 0) {
+					ibmphp_add_resource (mem[count]);
+					func->mem[count] = mem[count];
+				} else {
+					err ("cannot allocate requested mem for bus %x, device %x, len %x\n",
+					     func->busno, func->device, len[count]);
+					kfree (mem[count]);
+					return -EIO;
+				}
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start);
+				/* _______________________This is for debugging purposes only _______________________*/
+				debug ("b4 writing, start address is %x\n", func->mem[count]->start);
+				pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+				debug ("after writing, the address is %x\n", bar[count]);
+				/* __________________________________________________________________________________*/
+
+				if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+					/* takes up another dword */
+					debug ("inside mem 64 case, reg. mem, count %d\n", count);
+					count += 1;
+					/* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+					pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+				}
+			}
+		}		/* end of mem */
+	}			/* end of for */
+
+	func->bus = 0;		/* To indicate that this is not a PPB */
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq);
+	if ((irq > 0x00) && (irq < 0x05))
+		pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]);
+
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE);
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY);
+
+	pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_ROM_ADDRESS, 0x00L);
+	pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE);
+
+	return 0;
+}
+
+/******************************************************************************
+ * This routine configures a PCI-2-PCI bridge and the functions behind it
+ * Parameters: pci_func
+ * Returns: 
+ ******************************************************************************/
+static int configure_bridge (struct pci_func **func_passed, u8 slotno)
+{
+	int count;
+	int i;
+	int rc;
+	u8 sec_number;
+	u8 io_base;
+	u16 pfmem_base;
+	u32 bar[2];
+	u32 len[2];
+	u8 flag_io = FALSE;
+	u8 flag_mem = FALSE;
+	u8 flag_pfmem = FALSE;
+	u8 need_io_upper = FALSE;
+	u8 need_pfmem_upper = FALSE;
+	struct res_needed *amount_needed = NULL;
+	struct resource_node *io = NULL;
+	struct resource_node *bus_io[2] = {NULL, NULL};
+	struct resource_node *mem = NULL;
+	struct resource_node *bus_mem[2] = {NULL, NULL};
+	struct resource_node *mem_tmp = NULL;
+	struct resource_node *pfmem = NULL;
+	struct resource_node *bus_pfmem[2] = {NULL, NULL};
+	struct bus_node *bus;
+	u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		0
+	};
+	struct pci_func *func = *func_passed;
+	unsigned int devfn;
+	u8 irq;
+	int retval;
+
+	debug ("%s - enter\n", __FUNCTION__);
+
+	devfn = PCI_DEVFN(func->function, func->device);
+	ibmphp_pci_bus->number = func->busno;
+
+	/* Configuring necessary info for the bridge so that we could see the devices
+	 * behind it
+	 */
+
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, func->busno);
+
+	/* _____________________For debugging purposes only __________________________
+	pci_bus_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number);
+	debug ("primary # written into the bridge is %x\n", pri_number);
+	 ___________________________________________________________________________*/
+
+	/* in EBDA, only get allocated 1 additional bus # per slot */
+	sec_number = find_sec_number (func->busno, slotno);
+	if (sec_number == 0xff) {
+		err ("cannot allocate secondary bus number for the bridged device\n");
+		return -EINVAL;
+	}
+
+	debug ("after find_sec_number, the number we got is %x\n", sec_number);
+	debug ("AFTER FIND_SEC_NUMBER, func->busno IS %x\n", func->busno);
+
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, sec_number);
+	
+	/* __________________For debugging purposes only __________________________________
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+	debug ("sec_number after write/read is %x\n", sec_number);
+	 ________________________________________________________________________________*/
+
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, sec_number);
+
+	/* __________________For debugging purposes only ____________________________________
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sec_number);
+	debug ("subordinate number after write/read is %x\n", sec_number);
+	 __________________________________________________________________________________*/
+
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_CACHE_LINE_SIZE, CACHE);
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_LATENCY_TIMER, LATENCY);
+	pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_SEC_LATENCY_TIMER, LATENCY);
+
+	debug ("func->busno is %x\n", func->busno);
+	debug ("sec_number after writing is %x\n", sec_number);
+
+
+	/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+	   !!!!!!!!!!!!!!!NEED TO ADD!!!  FAST BACK-TO-BACK ENABLE!!!!!!!!!!!!!!!!!!!! 
+	   !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!*/
+
+
+	/* First we need to allocate mem/io for the bridge itself in case it needs it */
+	for (count = 0; address[count]; count++) {	/* for 2 BARs */
+		pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+		pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+		if (!bar[count]) {
+			/* This BAR is not implemented */
+			debug ("so we come here then, eh?, count = %d\n", count);
+			continue;
+		}
+		//  tmp_bar = bar[count];
+
+		debug ("Bar %d wants %x\n", count, bar[count]);
+
+		if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+			/* This is IO */
+			len[count] = bar[count] & 0xFFFFFFFC;
+			len[count] = ~len[count] + 1;
+
+			debug ("len[count] in IO = %x\n", len[count]);
+
+			bus_io[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+		
+			if (!bus_io[count]) {
+				err ("out of system memory\n");
+				retval = -ENOMEM;
+				goto error;
+			}
+			memset (bus_io[count], 0, sizeof (struct resource_node));
+			bus_io[count]->type = IO;
+			bus_io[count]->busno = func->busno;
+			bus_io[count]->devfunc = PCI_DEVFN(func->device,
+							func->function);
+			bus_io[count]->len = len[count];
+			if (ibmphp_check_resource (bus_io[count], 0) == 0) {
+				ibmphp_add_resource (bus_io[count]);
+				func->io[count] = bus_io[count];
+			} else {
+				err ("cannot allocate requested io for bus %x, device %x, len %x\n",
+				     func->busno, func->device, len[count]);
+				kfree (bus_io[count]);
+				return -EIO;
+			}
+
+			pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->io[count]->start);
+
+		} else {
+			/* This is Memory */
+			if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+				/* pfmem */
+				len[count] = bar[count] & 0xFFFFFFF0;
+				len[count] = ~len[count] + 1;
+
+				debug ("len[count] in PFMEM = %x\n", len[count]);
+
+				bus_pfmem[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+				if (!bus_pfmem[count]) {
+					err ("out of system memory\n");
+					retval = -ENOMEM;
+					goto error;
+				}
+				memset (bus_pfmem[count], 0, sizeof (struct resource_node));
+				bus_pfmem[count]->type = PFMEM;
+				bus_pfmem[count]->busno = func->busno;
+				bus_pfmem[count]->devfunc = PCI_DEVFN(func->device,
+							func->function);
+				bus_pfmem[count]->len = len[count];
+				bus_pfmem[count]->fromMem = FALSE;
+				if (ibmphp_check_resource (bus_pfmem[count], 0) == 0) {
+					ibmphp_add_resource (bus_pfmem[count]);
+					func->pfmem[count] = bus_pfmem[count];
+				} else {
+					mem_tmp = kmalloc(sizeof(*mem_tmp), GFP_KERNEL);
+					if (!mem_tmp) {
+						err ("out of system memory\n");
+						retval = -ENOMEM;
+						goto error;
+					}
+					memset (mem_tmp, 0, sizeof (struct resource_node));
+					mem_tmp->type = MEM;
+					mem_tmp->busno = bus_pfmem[count]->busno;
+					mem_tmp->devfunc = bus_pfmem[count]->devfunc;
+					mem_tmp->len = bus_pfmem[count]->len;
+					if (ibmphp_check_resource (mem_tmp, 0) == 0) {
+						ibmphp_add_resource (mem_tmp);
+						bus_pfmem[count]->fromMem = TRUE;
+						bus_pfmem[count]->rangeno = mem_tmp->rangeno;
+						ibmphp_add_pfmem_from_mem (bus_pfmem[count]);
+						func->pfmem[count] = bus_pfmem[count];
+					} else {
+						err ("cannot allocate requested pfmem for bus %x, device %x, len %x\n", 
+						     func->busno, func->device, len[count]);
+						kfree (mem_tmp);
+						kfree (bus_pfmem[count]);
+						return -EIO;
+					}
+				}
+
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->pfmem[count]->start);
+
+				if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+					/* takes up another dword */
+					count += 1;
+					/* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+					pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+
+				}
+			} else {
+				/* regular memory */
+				len[count] = bar[count] & 0xFFFFFFF0;
+				len[count] = ~len[count] + 1;
+
+				debug ("len[count] in Memory is %x\n", len[count]);
+
+				bus_mem[count] = kmalloc (sizeof (struct resource_node), GFP_KERNEL);
+				if (!bus_mem[count]) {
+					err ("out of system memory\n");
+					retval = -ENOMEM;
+					goto error;
+				}
+				memset (bus_mem[count], 0, sizeof (struct resource_node));
+				bus_mem[count]->type = MEM;
+				bus_mem[count]->busno = func->busno;
+				bus_mem[count]->devfunc = PCI_DEVFN(func->device,
+							func->function);
+				bus_mem[count]->len = len[count];
+				if (ibmphp_check_resource (bus_mem[count], 0) == 0) {
+					ibmphp_add_resource (bus_mem[count]);
+					func->mem[count] = bus_mem[count];
+				} else {
+					err ("cannot allocate requested mem for bus %x, device %x, len %x\n",
+					     func->busno, func->device, len[count]);
+					kfree (bus_mem[count]);
+					return -EIO;
+				}
+
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], func->mem[count]->start);
+
+				if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+					/* takes up another dword */
+					count += 1;
+					/* on the 2nd dword, write all 0s, since we can't handle them n.e.ways */
+					pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0x00000000);
+
+				}
+			}
+		}		/* end of mem */
+	}			/* end of for  */
+
+	/* Now need to see how much space the devices behind the bridge needed */
+	amount_needed = scan_behind_bridge (func, sec_number);
+	if (amount_needed == NULL)
+		return -ENOMEM;
+
+	ibmphp_pci_bus->number = func->busno;
+	debug ("after coming back from scan_behind_bridge\n");
+	debug ("amount_needed->not_correct = %x\n", amount_needed->not_correct);
+	debug ("amount_needed->io = %x\n", amount_needed->io);
+	debug ("amount_needed->mem = %x\n", amount_needed->mem);
+	debug ("amount_needed->pfmem =  %x\n", amount_needed->pfmem);
+
+	if (amount_needed->not_correct) {		
+		debug ("amount_needed is not correct\n");
+		for (count = 0; address[count]; count++) {
+			/* for 2 BARs */
+			if (bus_io[count]) {
+				ibmphp_remove_resource (bus_io[count]);
+				func->io[count] = NULL;
+			} else if (bus_pfmem[count]) {
+				ibmphp_remove_resource (bus_pfmem[count]);
+				func->pfmem[count] = NULL;
+			} else if (bus_mem[count]) {
+				ibmphp_remove_resource (bus_mem[count]);
+				func->mem[count] = NULL;
+			}
+		}
+		kfree (amount_needed);
+		return -ENODEV;
+	}
+
+	if (!amount_needed->io) {
+		debug ("it doesn't want IO?\n");
+		flag_io = TRUE;
+	} else {
+		debug ("it wants %x IO behind the bridge\n", amount_needed->io);
+		io = kmalloc(sizeof(*io), GFP_KERNEL);
+		
+		if (!io) {
+			err ("out of system memory\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+		memset (io, 0, sizeof (struct resource_node));
+		io->type = IO;
+		io->busno = func->busno;
+		io->devfunc = PCI_DEVFN(func->device, func->function);
+		io->len = amount_needed->io;
+		if (ibmphp_check_resource (io, 1) == 0) {
+			debug ("were we able to add io\n");
+			ibmphp_add_resource (io);
+			flag_io = TRUE;
+		}
+	}
+
+	if (!amount_needed->mem) {
+		debug ("it doesn't want n.e.memory?\n");
+		flag_mem = TRUE;
+	} else {
+		debug ("it wants %x memory behind the bridge\n", amount_needed->mem);
+		mem = kmalloc(sizeof(*mem), GFP_KERNEL);
+		if (!mem) {
+			err ("out of system memory\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+		memset (mem, 0, sizeof (struct resource_node));
+		mem->type = MEM;
+		mem->busno = func->busno;
+		mem->devfunc = PCI_DEVFN(func->device, func->function);
+		mem->len = amount_needed->mem;
+		if (ibmphp_check_resource (mem, 1) == 0) {
+			ibmphp_add_resource (mem);
+			flag_mem = TRUE;
+			debug ("were we able to add mem\n");
+		}
+	}
+
+	if (!amount_needed->pfmem) {
+		debug ("it doesn't want n.e.pfmem mem?\n");
+		flag_pfmem = TRUE;
+	} else {
+		debug ("it wants %x pfmemory behind the bridge\n", amount_needed->pfmem);
+		pfmem = kmalloc(sizeof(*pfmem), GFP_KERNEL);
+		if (!pfmem) {
+			err ("out of system memory\n");
+			retval = -ENOMEM;
+			goto error;
+		}
+		memset (pfmem, 0, sizeof (struct resource_node));
+		pfmem->type = PFMEM;
+		pfmem->busno = func->busno;
+		pfmem->devfunc = PCI_DEVFN(func->device, func->function);
+		pfmem->len = amount_needed->pfmem;
+		pfmem->fromMem = FALSE;
+		if (ibmphp_check_resource (pfmem, 1) == 0) {
+			ibmphp_add_resource (pfmem);
+			flag_pfmem = TRUE;
+		} else {
+			mem_tmp = kmalloc(sizeof(*mem_tmp), GFP_KERNEL);
+			if (!mem_tmp) {
+				err ("out of system memory\n");
+				retval = -ENOMEM;
+				goto error;
+			}
+			memset (mem_tmp, 0, sizeof (struct resource_node));
+			mem_tmp->type = MEM;
+			mem_tmp->busno = pfmem->busno;
+			mem_tmp->devfunc = pfmem->devfunc;
+			mem_tmp->len = pfmem->len;
+			if (ibmphp_check_resource (mem_tmp, 1) == 0) {
+				ibmphp_add_resource (mem_tmp);
+				pfmem->fromMem = TRUE;
+				pfmem->rangeno = mem_tmp->rangeno;
+				ibmphp_add_pfmem_from_mem (pfmem);
+				flag_pfmem = TRUE;
+			}
+		}
+	}
+
+	debug ("b4 if (flag_io && flag_mem && flag_pfmem)\n");
+	debug ("flag_io = %x, flag_mem = %x, flag_pfmem = %x\n", flag_io, flag_mem, flag_pfmem);
+
+	if (flag_io && flag_mem && flag_pfmem) {
+		/* If on bootup, there was a bridged card in this slot,
+		 * then card was removed and ibmphp got unloaded and loaded
+		 * back again, there's no way for us to remove the bus
+		 * struct, so no need to kmalloc, can use existing node
+		 */
+		bus = ibmphp_find_res_bus (sec_number);
+		if (!bus) {
+			bus = kmalloc(sizeof(*bus), GFP_KERNEL);
+			if (!bus) {
+				err ("out of system memory\n");
+				retval = -ENOMEM;
+				goto error;
+			}
+			memset (bus, 0, sizeof (struct bus_node));
+			bus->busno = sec_number;
+			debug ("b4 adding new bus\n");
+			rc = add_new_bus (bus, io, mem, pfmem, func->busno);
+		} else if (!(bus->rangeIO) && !(bus->rangeMem) && !(bus->rangePFMem))
+			rc = add_new_bus (bus, io, mem, pfmem, 0xFF);
+		else {
+			err ("expected bus structure not empty?\n");
+			retval = -EIO;
+			goto error;
+		}
+		if (rc) {
+			if (rc == -ENOMEM) {
+				ibmphp_remove_bus (bus, func->busno);
+				kfree (amount_needed);
+				return rc;
+			}
+			retval = rc;
+			goto error;
+		}
+		pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &io_base);
+		pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &pfmem_base);
+
+		if ((io_base & PCI_IO_RANGE_TYPE_MASK) == PCI_IO_RANGE_TYPE_32) {
+			debug ("io 32\n");
+			need_io_upper = TRUE;
+		}
+		if ((io_base & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
+			debug ("pfmem 64\n");
+			need_pfmem_upper = TRUE;
+		}
+
+		if (bus->noIORanges) {
+			pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00 | bus->rangeIO->start >> 8);
+			pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00 | bus->rangeIO->end >> 8);	
+
+			/* _______________This is for debugging purposes only ____________________
+			pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, &temp);
+			debug ("io_base = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8);
+			pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, &temp);
+			debug ("io_limit = %x\n", (temp & PCI_IO_RANGE_TYPE_MASK) << 8);
+			 ________________________________________________________________________*/
+
+			if (need_io_upper) {	/* since can't support n.e.ways */
+				pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_BASE_UPPER16, 0x0000);
+				pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_IO_LIMIT_UPPER16, 0x0000);
+			}
+		} else {
+			pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_BASE, 0x00);
+			pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_IO_LIMIT, 0x00);
+		}
+
+		if (bus->noMemRanges) {
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0x0000 | bus->rangeMem->start >> 16);
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000 | bus->rangeMem->end >> 16);
+			
+			/* ____________________This is for debugging purposes only ________________________
+			pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, &temp);
+			debug ("mem_base = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+			pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, &temp);
+			debug ("mem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+			 __________________________________________________________________________________*/
+
+		} else {
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_BASE, 0xffff);
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_MEMORY_LIMIT, 0x0000);
+		}
+		if (bus->noPFMemRanges) {
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0x0000 | bus->rangePFMem->start >> 16);
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000 | bus->rangePFMem->end >> 16);
+
+			/* __________________________This is for debugging purposes only _______________________
+			pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, &temp);
+			debug ("pfmem_base = %x", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+			pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, &temp);
+			debug ("pfmem_limit = %x\n", (temp & PCI_MEMORY_RANGE_TYPE_MASK) << 16);
+			 ______________________________________________________________________________________*/
+
+			if (need_pfmem_upper) {	/* since can't support n.e.ways */
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_BASE_UPPER32, 0x00000000);
+				pci_bus_write_config_dword (ibmphp_pci_bus, devfn, PCI_PREF_LIMIT_UPPER32, 0x00000000);
+			}
+		} else {
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_BASE, 0xffff);
+			pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_PREF_MEMORY_LIMIT, 0x0000);
+		}
+
+		debug ("b4 writing control information\n");
+
+		pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_PIN, &irq);
+		if ((irq > 0x00) && (irq < 0x05))
+			pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_INTERRUPT_LINE, func->irq[irq - 1]);
+		/*    
+		pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, ctrl);
+		pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_PARITY);
+		pci_bus_write_config_byte (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, PCI_BRIDGE_CTL_SERR);
+		 */
+
+		pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_COMMAND, DEVICEENABLE);
+		pci_bus_write_config_word (ibmphp_pci_bus, devfn, PCI_BRIDGE_CONTROL, 0x07);
+		for (i = 0; i < 32; i++) {
+			if (amount_needed->devices[i]) {
+				debug ("device where devices[i] is 1 = %x\n", i);
+				func->devices[i] = 1;
+			}
+		}
+		func->bus = 1;	/* For unconfiguring, to indicate it's PPB */
+		func_passed = &func;
+		debug ("func->busno b4 returning is %x\n", func->busno);
+		debug ("func->busno b4 returning in the other structure is %x\n", (*func_passed)->busno);
+		kfree (amount_needed);
+		return 0;
+	} else {
+		err ("Configuring bridge was unsuccessful...\n");
+		mem_tmp = NULL;
+		retval = -EIO;
+		goto error;
+	}
+
+error:
+	kfree(amount_needed);
+	if (pfmem)
+		ibmphp_remove_resource (pfmem);
+	if (io)
+		ibmphp_remove_resource (io);
+	if (mem)
+		ibmphp_remove_resource (mem);
+	for (i = 0; i < 2; i++) {	/* for 2 BARs */
+		if (bus_io[i]) {
+			ibmphp_remove_resource (bus_io[i]);
+			func->io[i] = NULL;
+		} else if (bus_pfmem[i]) {
+			ibmphp_remove_resource (bus_pfmem[i]);
+			func->pfmem[i] = NULL;
+		} else if (bus_mem[i]) {
+			ibmphp_remove_resource (bus_mem[i]);
+			func->mem[i] = NULL;
+		}
+	}
+	return retval;
+}
+
+/*****************************************************************************
+ * This function adds up the amount of resources needed behind the PPB bridge
+ * and passes it to the configure_bridge function
+ * Input: bridge function
+ * Ouput: amount of resources needed
+ *****************************************************************************/
+static struct res_needed *scan_behind_bridge (struct pci_func * func, u8 busno)
+{
+	int count, len[6];
+	u16 vendor_id;
+	u8 hdr_type;
+	u8 device, function;
+	unsigned int devfn;
+	int howmany = 0;	/*this is to see if there are any devices behind the bridge */
+
+	u32 bar[6], class;
+	u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		PCI_BASE_ADDRESS_2,
+		PCI_BASE_ADDRESS_3,
+		PCI_BASE_ADDRESS_4,
+		PCI_BASE_ADDRESS_5,
+		0
+	};
+	struct res_needed *amount;
+
+	amount = kmalloc(sizeof(*amount), GFP_KERNEL);
+	if (amount == NULL)
+		return NULL;
+	memset (amount, 0, sizeof (struct res_needed));
+
+	ibmphp_pci_bus->number = busno;
+
+	debug ("the bus_no behind the bridge is %x\n", busno);
+	debug ("scanning devices behind the bridge...\n");
+	for (device = 0; device < 32; device++) {
+		amount->devices[device] = 0;
+		for (function = 0; function < 8; function++) {
+			devfn = PCI_DEVFN(device, function);
+
+			pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+			if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+				/* found correct device!!! */
+				howmany++;
+
+				pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+				pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+				debug ("hdr_type behind the bridge is %x\n", hdr_type);
+				if (hdr_type & PCI_HEADER_TYPE_BRIDGE) {
+					err ("embedded bridges not supported for hot-plugging.\n");
+					amount->not_correct = TRUE;
+					return amount;
+				}
+
+				class >>= 8;	/* to take revision out, class = class.subclass.prog i/f */
+				if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+					err ("The device %x is VGA compatible and as is not supported for hot plugging. "
+					     "Please choose another device.\n", device);
+					amount->not_correct = TRUE;
+					return amount;
+				} else if (class == PCI_CLASS_DISPLAY_VGA) {
+					err ("The device %x is not supported for hot plugging. "
+					     "Please choose another device.\n", device);
+					amount->not_correct = TRUE;
+					return amount;
+				}
+
+				amount->devices[device] = 1;
+
+				for (count = 0; address[count]; count++) {
+					/* for 6 BARs */
+					/*
+					pci_bus_read_config_byte (ibmphp_pci_bus, devfn, address[count], &tmp);
+					if (tmp & 0x01) // IO
+						pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFD);
+					else // MEMORY
+						pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+					*/
+					pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+					pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &bar[count]);
+
+					debug ("what is bar[count]? %x, count = %d\n", bar[count], count);
+
+					if (!bar[count])	/* This BAR is not implemented */
+						continue;
+
+					//tmp_bar = bar[count];
+
+					debug ("count %d device %x function %x wants %x resources\n", count, device, function, bar[count]);
+
+					if (bar[count] & PCI_BASE_ADDRESS_SPACE_IO) {
+						/* This is IO */
+						len[count] = bar[count] & 0xFFFFFFFC;
+						len[count] = ~len[count] + 1;
+						amount->io += len[count];
+					} else {
+						/* This is Memory */
+						if (bar[count] & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+							/* pfmem */
+							len[count] = bar[count] & 0xFFFFFFF0;
+							len[count] = ~len[count] + 1;
+							amount->pfmem += len[count];
+							if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64)
+								/* takes up another dword */
+								count += 1;
+
+						} else {
+							/* regular memory */
+							len[count] = bar[count] & 0xFFFFFFF0;
+							len[count] = ~len[count] + 1;
+							amount->mem += len[count];
+							if (bar[count] & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+								/* takes up another dword */
+								count += 1;
+							}
+						}
+					}
+				}	/* end for */
+			}	/* end if (valid) */
+		}	/* end for */
+	}	/* end for */
+
+	if (!howmany)
+		amount->not_correct = TRUE;
+	else
+		amount->not_correct = FALSE;
+	if ((amount->io) && (amount->io < IOBRIDGE))
+		amount->io = IOBRIDGE;
+	if ((amount->mem) && (amount->mem < MEMBRIDGE))
+		amount->mem = MEMBRIDGE;
+	if ((amount->pfmem) && (amount->pfmem < MEMBRIDGE))
+		amount->pfmem = MEMBRIDGE;
+	return amount;
+}
+
+/* The following 3 unconfigure_boot_ routines deal with the case when we had the card 
+ * upon bootup in the system, since we don't allocate func to such case, we need to read 
+ * the start addresses from pci config space and then find the corresponding entries in 
+ * our resource lists.  The functions return either 0, -ENODEV, or -1 (general failure)
+ * Change: we also call these functions even if we configured the card ourselves (i.e., not
+ * the bootup case), since it should work same way
+ */
+static int unconfigure_boot_device (u8 busno, u8 device, u8 function)
+{
+	u32 start_address;
+	u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		PCI_BASE_ADDRESS_2,
+		PCI_BASE_ADDRESS_3,
+		PCI_BASE_ADDRESS_4,
+		PCI_BASE_ADDRESS_5,
+		0
+	};
+	int count;
+	struct resource_node *io;
+	struct resource_node *mem;
+	struct resource_node *pfmem;
+	struct bus_node *bus;
+	u32 end_address;
+	u32 temp_end;
+	u32 size;
+	u32 tmp_address;
+	unsigned int devfn;
+
+	debug ("%s - enter\n", __FUNCTION__);
+
+	bus = ibmphp_find_res_bus (busno);
+	if (!bus) {
+		debug ("cannot find corresponding bus.\n");
+		return -EINVAL;
+	}
+
+	devfn = PCI_DEVFN(device, function);
+	ibmphp_pci_bus->number = busno;
+	for (count = 0; address[count]; count++) {	/* for 6 BARs */
+		pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address);
+
+		/* We can do this here, b/c by that time the device driver of the card has been stopped */
+
+		pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], 0xFFFFFFFF);
+		pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &size);
+		pci_bus_write_config_dword (ibmphp_pci_bus, devfn, address[count], start_address);
+
+		debug ("start_address is %x\n", start_address);
+		debug ("busno, device, function %x %x %x\n", busno, device, function);
+		if (!size) {
+			/* This BAR is not implemented */
+			debug ("is this bar no implemented?, count = %d\n", count);
+			continue;
+		}
+		tmp_address = start_address;
+		if (start_address & PCI_BASE_ADDRESS_SPACE_IO) {
+			/* This is IO */
+			start_address &= PCI_BASE_ADDRESS_IO_MASK;
+			size = size & 0xFFFFFFFC;
+			size = ~size + 1;
+			end_address = start_address + size - 1;
+			if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+				err ("cannot find corresponding IO resource to remove\n");
+				return -EIO;
+			}
+			debug ("io->start = %x\n", io->start);
+			temp_end = io->end;
+			start_address = io->end + 1;
+			ibmphp_remove_resource (io);
+			/* This is needed b/c of the old I/O restrictions in the BIOS */
+			while (temp_end < end_address) {
+				if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+					err ("cannot find corresponding IO resource to remove\n");
+					return -EIO;
+				}
+				debug ("io->start = %x\n", io->start);
+				temp_end = io->end;
+				start_address = io->end + 1;
+				ibmphp_remove_resource (io);
+			}
+
+			/* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */
+		} else {
+			/* This is Memory */
+			start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+			if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+				/* pfmem */
+				debug ("start address of pfmem is %x\n", start_address);
+
+				if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) {
+					err ("cannot find corresponding PFMEM resource to remove\n");
+					return -EIO;
+				}
+				if (pfmem) {
+					debug ("pfmem->start = %x\n", pfmem->start);
+
+					ibmphp_remove_resource(pfmem);
+				}
+			} else {
+				/* regular memory */
+				debug ("start address of mem is %x\n", start_address);
+				if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) {
+					err ("cannot find corresponding MEM resource to remove\n");
+					return -EIO;
+				}
+				if (mem) {
+					debug ("mem->start = %x\n", mem->start);
+
+					ibmphp_remove_resource(mem);
+				}
+			}
+			if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+				/* takes up another dword */
+				count += 1;
+			}
+		}	/* end of mem */
+	}	/* end of for */
+
+	return 0;
+}
+
+static int unconfigure_boot_bridge (u8 busno, u8 device, u8 function)
+{
+	int count;
+	int bus_no, pri_no, sub_no, sec_no = 0;
+	u32 start_address, tmp_address;
+	u8 sec_number, sub_number, pri_number;
+	struct resource_node *io = NULL;
+	struct resource_node *mem = NULL;
+	struct resource_node *pfmem = NULL;
+	struct bus_node *bus;
+	u32 address[] = {
+		PCI_BASE_ADDRESS_0,
+		PCI_BASE_ADDRESS_1,
+		0
+	};
+	unsigned int devfn;
+
+	devfn = PCI_DEVFN(device, function);
+	ibmphp_pci_bus->number = busno;
+	bus_no = (int) busno;
+	debug ("busno is %x\n", busno);
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_PRIMARY_BUS, &pri_number);
+	debug ("%s - busno = %x, primary_number = %x\n", __FUNCTION__, busno, pri_number);
+
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SECONDARY_BUS, &sec_number);
+	debug ("sec_number is %x\n", sec_number);
+	sec_no = (int) sec_number;
+	pri_no = (int) pri_number;
+	if (pri_no != bus_no) {
+		err ("primary numbers in our structures and pci config space don't match.\n");
+		return -EINVAL;
+	}
+
+	pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_SUBORDINATE_BUS, &sub_number);
+	sub_no = (int) sub_number;
+	debug ("sub_no is %d, sec_no is %d\n", sub_no, sec_no);
+	if (sec_no != sub_number) {
+		err ("there're more buses behind this bridge.  Hot removal is not supported.  Please choose another card\n");
+		return -ENODEV;
+	}
+
+	bus = ibmphp_find_res_bus (sec_number);
+	debug ("bus->busno is %x\n", bus->busno);
+	debug ("sec_number is %x\n", sec_number);
+	if (!bus) {
+		err ("cannot find Bus structure for the bridged device\n");
+		return -EINVAL;
+	}
+
+	ibmphp_remove_bus (bus, busno);
+
+	for (count = 0; address[count]; count++) {
+		/* for 2 BARs */
+		pci_bus_read_config_dword (ibmphp_pci_bus, devfn, address[count], &start_address);
+
+		if (!start_address) {
+			/* This BAR is not implemented */
+			continue;
+		}
+
+		tmp_address = start_address;
+
+		if (start_address & PCI_BASE_ADDRESS_SPACE_IO) {
+			/* This is IO */
+			start_address &= PCI_BASE_ADDRESS_IO_MASK;
+			if (ibmphp_find_resource (bus, start_address, &io, IO) < 0) {
+				err ("cannot find corresponding IO resource to remove\n");
+				return -EIO;
+			}
+			if (io)
+				debug ("io->start = %x\n", io->start);
+
+			ibmphp_remove_resource (io);
+
+			/* ????????? DO WE NEED TO WRITE ANYTHING INTO THE PCI CONFIG SPACE BACK ?????????? */
+		} else {
+			/* This is Memory */
+			start_address &= PCI_BASE_ADDRESS_MEM_MASK;
+			if (start_address & PCI_BASE_ADDRESS_MEM_PREFETCH) {
+				/* pfmem */
+				if (ibmphp_find_resource (bus, start_address, &pfmem, PFMEM) < 0) {
+					err ("cannot find corresponding PFMEM resource to remove\n");
+					return -EINVAL;
+				}
+				if (pfmem) {
+					debug ("pfmem->start = %x\n", pfmem->start);
+
+					ibmphp_remove_resource(pfmem);
+				}
+			} else {
+				/* regular memory */
+				if (ibmphp_find_resource (bus, start_address, &mem, MEM) < 0) {
+					err ("cannot find corresponding MEM resource to remove\n");
+					return -EINVAL;
+				}
+				if (mem) {
+					debug ("mem->start = %x\n", mem->start);
+
+					ibmphp_remove_resource(mem);
+				}
+			}
+			if (tmp_address & PCI_BASE_ADDRESS_MEM_TYPE_64) {
+				/* takes up another dword */
+				count += 1;
+			}
+		}	/* end of mem */
+	}	/* end of for */
+	debug ("%s - exiting, returning success\n", __FUNCTION__);
+	return 0;
+}
+
+static int unconfigure_boot_card (struct slot *slot_cur)
+{
+	u16 vendor_id;
+	u32 class;
+	u8 hdr_type;
+	u8 device;
+	u8 busno;
+	u8 function;
+	int rc;
+	unsigned int devfn;
+	u8 valid_device = 0x00; /* To see if we are ever able to find valid device and read it */
+
+	debug ("%s - enter\n", __FUNCTION__);
+
+	device = slot_cur->device;
+	busno = slot_cur->bus;
+
+	debug ("b4 for loop, device is %x\n", device);
+	/* For every function on the card */
+	for (function = 0x0; function < 0x08; function++) {
+		devfn = PCI_DEVFN(device, function);
+		ibmphp_pci_bus->number = busno;
+
+		pci_bus_read_config_word (ibmphp_pci_bus, devfn, PCI_VENDOR_ID, &vendor_id);
+
+		if (vendor_id != PCI_VENDOR_ID_NOTVALID) {
+			/* found correct device!!! */
+			++valid_device;
+
+			debug ("%s - found correct device\n", __FUNCTION__);
+
+			/* header: x x x x x x x x
+			 *         | |___________|=> 1=PPB bridge, 0=normal device, 2=CardBus Bridge
+			 *         |_=> 0 = single function device, 1 = multi-function device
+			 */
+
+			pci_bus_read_config_byte (ibmphp_pci_bus, devfn, PCI_HEADER_TYPE, &hdr_type);
+			pci_bus_read_config_dword (ibmphp_pci_bus, devfn, PCI_CLASS_REVISION, &class);
+
+			debug ("hdr_type %x, class %x\n", hdr_type, class);
+			class >>= 8;	/* to take revision out, class = class.subclass.prog i/f */
+			if (class == PCI_CLASS_NOT_DEFINED_VGA) {
+				err ("The device %x function %x is VGA compatible and is not supported for hot removing. "
+				     "Please choose another device.\n", device, function);
+				return -ENODEV;
+			} else if (class == PCI_CLASS_DISPLAY_VGA) {
+				err ("The device %x function %x is not supported for hot removing. "
+				     "Please choose another device.\n", device, function);
+				return -ENODEV;
+			}
+
+			switch (hdr_type) {
+				case PCI_HEADER_TYPE_NORMAL:
+					rc = unconfigure_boot_device (busno, device, function);
+					if (rc) {
+						err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n",
+						     device, function, busno);
+						return rc;
+					}
+					function = 0x8;
+					break;
+				case PCI_HEADER_TYPE_MULTIDEVICE:
+					rc = unconfigure_boot_device (busno, device, function);
+					if (rc) {
+						err ("was not able to unconfigure device %x func %x on bus %x. bailing out...\n",
+						     device, function, busno);
+						return rc;
+					}
+					break;
+				case PCI_HEADER_TYPE_BRIDGE:
+					class >>= 8;
+					if (class != PCI_CLASS_BRIDGE_PCI) {
+						err ("This device %x function %x is not PCI-to-PCI bridge, "
+						     "and is not supported for hot-removing. "
+						     "Please try another card.\n", device, function);
+						return -ENODEV;
+					}
+					rc = unconfigure_boot_bridge (busno, device, function);
+					if (rc != 0) {
+						err ("was not able to hot-remove PPB properly.\n");
+						return rc;
+					}
+
+					function = 0x8;
+					break;
+				case PCI_HEADER_TYPE_MULTIBRIDGE:
+					class >>= 8;
+					if (class != PCI_CLASS_BRIDGE_PCI) {
+						err ("This device %x function %x is not PCI-to-PCI bridge, "
+						     "and is not supported for hot-removing. "
+						     "Please try another card.\n", device, function);
+						return -ENODEV;
+					}
+					rc = unconfigure_boot_bridge (busno, device, function);
+					if (rc != 0) {
+						err ("was not able to hot-remove PPB properly.\n");
+						return rc;
+					}
+					break;
+				default:
+					err ("MAJOR PROBLEM!!!! Cannot read device's header\n");
+					return -1;
+					break;
+			}	/* end of switch */
+		}	/* end of valid device */
+	}	/* end of for */
+
+	if (!valid_device) {
+		err ("Could not find device to unconfigure.  Or could not read the card.\n");
+		return -1;
+	}
+	return 0;
+}
+
+/*
+ * free the resources of the card (multi, single, or bridged)
+ * Parameters: slot, flag to say if this is for removing entire module or just
+ * unconfiguring the device
+ * TO DO:  will probably need to add some code in case there was some resource,
+ * to remove it... this is from when we have errors in the configure_card...
+ * 			!!!!!!!!!!!!!!!!!!!!!!!!!FOR BUSES!!!!!!!!!!!!
+ * Returns: 0, -1, -ENODEV 
+ */
+int ibmphp_unconfigure_card (struct slot **slot_cur, int the_end)
+{
+	int i;
+	int count;
+	int rc;
+	struct slot *sl = *slot_cur;
+	struct pci_func *cur_func = NULL;
+	struct pci_func *temp_func;
+
+	debug ("%s - enter\n", __FUNCTION__);
+
+	if (!the_end) {
+		/* Need to unconfigure the card */
+		rc = unconfigure_boot_card (sl);
+		if ((rc == -ENODEV) || (rc == -EIO) || (rc == -EINVAL)) {
+			/* In all other cases, will still need to get rid of func structure if it exists */
+			return rc;
+		}
+	}
+
+	if (sl->func) {
+		cur_func = sl->func;
+		while (cur_func) {
+			/* TO DO: WILL MOST LIKELY NEED TO GET RID OF THE BUS STRUCTURE FROM RESOURCES AS WELL */
+			if (cur_func->bus) {
+				/* in other words, it's a PPB */
+				count = 2;
+			} else {
+				count = 6;
+			}
+
+			for (i = 0; i < count; i++) {
+				if (cur_func->io[i]) {
+					debug ("io[%d] exists\n", i);
+					if (the_end > 0)
+						ibmphp_remove_resource (cur_func->io[i]);
+					cur_func->io[i] = NULL;
+				}
+				if (cur_func->mem[i]) {
+					debug ("mem[%d] exists\n", i);
+					if (the_end > 0)
+						ibmphp_remove_resource (cur_func->mem[i]);
+					cur_func->mem[i] = NULL;
+				}
+				if (cur_func->pfmem[i]) {
+					debug ("pfmem[%d] exists\n", i);
+					if (the_end > 0)
+						ibmphp_remove_resource (cur_func->pfmem[i]);
+					cur_func->pfmem[i] = NULL;
+				}
+			}
+
+			temp_func = cur_func->next;
+			kfree (cur_func);
+			cur_func = temp_func;
+		}
+	}
+
+	sl->func = NULL;
+	*slot_cur = sl;
+	debug ("%s - exit\n", __FUNCTION__);
+	return 0;
+}
+
+/*
+ * add a new bus resulting from hot-plugging a PPB bridge with devices
+ *
+ * Input: bus and the amount of resources needed (we know we can assign those,
+ *        since they've been checked already
+ * Output: bus added to the correct spot
+ *         0, -1, error 
+ */
+static int add_new_bus (struct bus_node *bus, struct resource_node *io, struct resource_node *mem, struct resource_node *pfmem, u8 parent_busno)
+{
+	struct range_node *io_range = NULL;
+	struct range_node *mem_range = NULL;
+	struct range_node *pfmem_range = NULL;
+	struct bus_node *cur_bus = NULL;
+
+	/* Trying to find the parent bus number */
+	if (parent_busno != 0xFF) {
+		cur_bus	= ibmphp_find_res_bus (parent_busno);
+		if (!cur_bus) {
+			err ("strange, cannot find bus which is supposed to be at the system... something is terribly wrong...\n");
+			return -ENODEV;
+		}
+	
+		list_add (&bus->bus_list, &cur_bus->bus_list);
+	}
+	if (io) {
+		io_range = kmalloc(sizeof(*io_range), GFP_KERNEL);
+		if (!io_range) {
+			err ("out of system memory\n");
+			return -ENOMEM;
+		}
+		memset (io_range, 0, sizeof (struct range_node));
+		io_range->start = io->start;
+		io_range->end = io->end;
+		io_range->rangeno = 1;
+		bus->noIORanges = 1;
+		bus->rangeIO = io_range;
+	}
+	if (mem) {
+		mem_range = kmalloc(sizeof(*mem_range), GFP_KERNEL);
+		if (!mem_range) {
+			err ("out of system memory\n");
+			return -ENOMEM;
+		}
+		memset (mem_range, 0, sizeof (struct range_node));
+		mem_range->start = mem->start;
+		mem_range->end = mem->end;
+		mem_range->rangeno = 1;
+		bus->noMemRanges = 1;
+		bus->rangeMem = mem_range;
+	}
+	if (pfmem) {
+		pfmem_range = kmalloc(sizeof(*pfmem_range), GFP_KERNEL);
+		if (!pfmem_range) {	
+			err ("out of system memory\n");
+			return -ENOMEM;
+		}
+		memset (pfmem_range, 0, sizeof (struct range_node));
+		pfmem_range->start = pfmem->start;
+		pfmem_range->end = pfmem->end;
+		pfmem_range->rangeno = 1;
+		bus->noPFMemRanges = 1;
+		bus->rangePFMem = pfmem_range;
+	}
+	return 0;
+}
+
+/*
+ * find the 1st available bus number for PPB to set as its secondary bus
+ * Parameters: bus_number of the primary bus
+ * Returns: bus_number of the secondary bus or 0xff in case of failure
+ */
+static u8 find_sec_number (u8 primary_busno, u8 slotno)
+{
+	int min, max;
+	u8 busno;
+	struct bus_info *bus;
+	struct bus_node *bus_cur;
+
+	bus = ibmphp_find_same_bus_num (primary_busno);
+	if (!bus) {
+		err ("cannot get slot range of the bus from the BIOS\n");
+		return 0xff;
+	}
+	max = bus->slot_max;
+	min = bus->slot_min;
+	if ((slotno > max) || (slotno < min)) {
+		err ("got the wrong range\n");
+		return 0xff;
+	}
+	busno = (u8) (slotno - (u8) min);
+	busno += primary_busno + 0x01;
+	bus_cur = ibmphp_find_res_bus (busno);
+	/* either there is no such bus number, or there are no ranges, which
+	 * can only happen if we removed the bridged device in previous load
+	 * of the driver, and now only have the skeleton bus struct
+	 */
+	if ((!bus_cur) || (!(bus_cur->rangeIO) && !(bus_cur->rangeMem) && !(bus_cur->rangePFMem)))
+		return busno;
+	return 0xff;
+}
+