[PATCH] pciehp: remove redundant data structures

State information is currently stored in per-slot as well as
per-pci-function data structures in pciehp. There's a lot of
overlap in the information kept, and some of it is never used.
This patch consolidates the state information to per-slot and
eliminates unused data structures. The biggest change is to
eliminate the pci_func structure and the code around managing
its lists.

Signed-off-by: Rajesh Shah <rajesh.shah@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 22 insertions, 327 deletions

diff --git a/drivers/pci/hotplug/pciehp_pci.c b/drivers/pci/hotplug/pciehp_pci.c
index db59a06ab0b..1d185c1bc77 100644
--- a/drivers/pci/hotplug/pciehp_pci.c
+++ b/drivers/pci/hotplug/pciehp_pci.c
@@ -101,346 +101,41 @@ int pciehp_configure_device(struct slot *p_slot)
 	return 0;
 }
 
-int pciehp_unconfigure_device(struct pci_func* func) 
+int pciehp_unconfigure_device(struct slot *p_slot)
 {
 	int rc = 0;
 	int j;
-	struct pci_bus *pbus;
+	u8 bctl = 0;
 
-	dbg("%s: bus/dev/func = %x/%x/%x\n", __FUNCTION__, func->bus,
-				func->device, func->function);
-	pbus = func->pci_dev->bus;
+	dbg("%s: bus/dev = %x/%x\n", __FUNCTION__, p_slot->bus,
+				p_slot->device);
 
 	for (j=0; j<8 ; j++) {
-		struct pci_dev* temp = pci_find_slot(func->bus,
-				(func->device << 3) | j);
-		if (temp) {
-			pci_remove_bus_device(temp);
+		struct pci_dev* temp = pci_find_slot(p_slot->bus,
+				(p_slot->device << 3) | j);
+		if (!temp)
+			continue;
+		if ((temp->class >> 16) == PCI_BASE_CLASS_DISPLAY) {
+			err("Cannot remove display device %s\n",
+					pci_name(temp));
+			continue;
+		}
+		if (temp->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
+			pci_read_config_byte(temp, PCI_BRIDGE_CONTROL, &bctl);
+			if (bctl & PCI_BRIDGE_CTL_VGA) {
+				err("Cannot remove display device %s\n",
+						pci_name(temp));
+				continue;
+			}
 		}
+		pci_remove_bus_device(temp);
 	}
 	/* 
 	 * Some PCI Express root ports require fixup after hot-plug operation.
 	 */
 	if (pcie_mch_quirk) 
-		pci_fixup_device(pci_fixup_final, pbus->self);
+		pci_fixup_device(pci_fixup_final, p_slot->ctrl->pci_dev);
 	
 	return rc;
 }
 
-/*
- * pciehp_save_config
- *
- * Reads configuration for all slots in a PCI bus and saves info.
- *
- * Note:  For non-hot plug busses, the slot # saved is the device #
- *
- * returns 0 if success
- */
-int pciehp_save_config(struct controller *ctrl, int busnumber, int num_ctlr_slots, int first_device_num)
-{
-	int rc;
-	u8 class_code;
-	u8 header_type;
-	u32 ID;
-	u8 secondary_bus;
-	struct pci_func *new_slot;
-	int sub_bus;
-	int max_functions;
-	int function;
-	u8 DevError;
-	int device = 0;
-	int cloop = 0;
-	int stop_it;
-	int index;
-	int is_hot_plug = num_ctlr_slots || first_device_num;
-	struct pci_bus lpci_bus, *pci_bus;
-	int FirstSupported, LastSupported;
-
-	dbg("%s: Enter\n", __FUNCTION__);
-
-	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
-	pci_bus = &lpci_bus;
-
-	dbg("%s: num_ctlr_slots = %d, first_device_num = %d\n", __FUNCTION__,
-				num_ctlr_slots, first_device_num);
-
-	/*   Decide which slots are supported */
-	if (is_hot_plug) {
-		/*********************************
-		 *  is_hot_plug is the slot mask
-		 *********************************/
-		FirstSupported = first_device_num;
-		LastSupported = FirstSupported + num_ctlr_slots - 1;
-	} else {
-		FirstSupported = 0;
-		LastSupported = 0x1F;
-	}
-
-	dbg("FirstSupported = %d, LastSupported = %d\n", FirstSupported,
-					LastSupported);
-
-	/*   Save PCI configuration space for all devices in supported slots */
-	dbg("%s: pci_bus->number = %x\n", __FUNCTION__, pci_bus->number);
-	pci_bus->number = busnumber;
-	dbg("%s: bus = %x, dev = %x\n", __FUNCTION__, busnumber, device);
-	for (device = FirstSupported; device <= LastSupported; device++) {
-		ID = 0xFFFFFFFF;
-		rc = pci_bus_read_config_dword(pci_bus, PCI_DEVFN(device, 0),
-					PCI_VENDOR_ID, &ID);
-
-		if (ID != 0xFFFFFFFF) {	  /*  device in slot */
-			dbg("%s: ID = %x\n", __FUNCTION__, ID);
-			rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
-					0x0B, &class_code);
-			if (rc)
-				return rc;
-
-			rc = pci_bus_read_config_byte(pci_bus, PCI_DEVFN(device, 0),
-					PCI_HEADER_TYPE, &header_type);
-			if (rc)
-				return rc;
-
-			dbg("class_code = %x, header_type = %x\n", class_code, header_type);
-
-			/* If multi-function device, set max_functions to 8 */
-			if (header_type & 0x80)
-				max_functions = 8;
-			else
-				max_functions = 1;
-
-			function = 0;
-
-			do {
-				DevError = 0;
-				dbg("%s: In do loop\n", __FUNCTION__);
-
-				if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {   /* P-P Bridge */
-					/* Recurse the subordinate bus
-					 * get the subordinate bus number
-					 */
-					rc = pci_bus_read_config_byte(pci_bus,
-						PCI_DEVFN(device, function), 
-						PCI_SECONDARY_BUS, &secondary_bus);
-					if (rc) {
-						return rc;
-					} else {
-						sub_bus = (int) secondary_bus;
-
-						/* Save secondary bus cfg spc with this recursive call. */
-						rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
-						if (rc)
-							return rc;
-					}
-				}
-
-				index = 0;
-				new_slot = pciehp_slot_find(busnumber, device, index++);
-
-				dbg("%s: new_slot = %p bus %x dev %x fun %x\n",
-				__FUNCTION__, new_slot, busnumber, device, index-1);
-
-				while (new_slot && (new_slot->function != (u8) function)) {
-					new_slot = pciehp_slot_find(busnumber, device, index++);
-					dbg("%s: while loop, new_slot = %p bus %x dev %x fun %x\n",
-					__FUNCTION__, new_slot, busnumber, device, index-1);
-				}
-				if (!new_slot) {
-					/* Setup slot structure. */
-					new_slot = pciehp_slot_create(busnumber);
-					dbg("%s: if, new_slot = %p bus %x dev %x fun %x\n",
-					__FUNCTION__, new_slot, busnumber, device, function);
-
-					if (new_slot == NULL)
-						return(1);
-				}
-
-				new_slot->bus = (u8) busnumber;
-				new_slot->device = (u8) device;
-				new_slot->function = (u8) function;
-				new_slot->is_a_board = 1;
-				new_slot->switch_save = 0x10;
-				/* In case of unsupported board */
-				new_slot->status = DevError;
-				new_slot->pci_dev = pci_find_slot(new_slot->bus,
-					(new_slot->device << 3) | new_slot->function);
-				dbg("new_slot->pci_dev = %p\n", new_slot->pci_dev);
-
-				for (cloop = 0; cloop < 0x20; cloop++) {
-					rc = pci_bus_read_config_dword(pci_bus,
-						PCI_DEVFN(device, function),
-						cloop << 2, 
-						(u32 *) &(new_slot->config_space [cloop]));
-					/* dbg("new_slot->config_space[%x] = %x\n",
-						cloop, new_slot->config_space[cloop]); */
-					if (rc)
-						return rc;
-				}
-
-				function++;
-
-				stop_it = 0;
-
-				/*  this loop skips to the next present function
-				 *  reading in Class Code and Header type.
-				 */
-
-				while ((function < max_functions)&&(!stop_it)) {
-					dbg("%s: In while loop \n", __FUNCTION__);
-					rc = pci_bus_read_config_dword(pci_bus,
-							PCI_DEVFN(device, function),
-							PCI_VENDOR_ID, &ID);
-
-					if (ID == 0xFFFFFFFF) {  /* nothing there. */
-						function++;
-						dbg("Nothing there\n");
-					} else {  /* Something there */
-						rc = pci_bus_read_config_byte(pci_bus,
-							PCI_DEVFN(device, function),
-							0x0B, &class_code);
-						if (rc)
-							return rc;
-
-						rc = pci_bus_read_config_byte(pci_bus,
-							PCI_DEVFN(device, function),
-							PCI_HEADER_TYPE, &header_type);
-						if (rc)
-							return rc;
-
-						dbg("class_code = %x, header_type = %x\n", class_code, header_type);
-						stop_it++;
-					}
-				}
-
-			} while (function < max_functions);
-			/* End of IF (device in slot?) */
-		} else if (is_hot_plug) {
-			/* Setup slot structure with entry for empty slot */
-			new_slot = pciehp_slot_create(busnumber);
-
-			if (new_slot == NULL) {
-				return(1);
-			}
-			dbg("new_slot = %p, bus = %x, dev = %x, fun = %x\n", new_slot,
-				new_slot->bus, new_slot->device, new_slot->function);
-
-			new_slot->bus = (u8) busnumber;
-			new_slot->device = (u8) device;
-			new_slot->function = 0;
-			new_slot->is_a_board = 0;
-			new_slot->presence_save = 0;
-			new_slot->switch_save = 0;
-		}
-	} 			/* End of FOR loop */
-
-	dbg("%s: Exit\n", __FUNCTION__);
-	return(0);
-}
-
-
-/*
- * pciehp_save_slot_config
- *
- * Saves configuration info for all PCI devices in a given slot
- * including subordinate busses.
- *
- * returns 0 if success
- */
-int pciehp_save_slot_config(struct controller *ctrl, struct pci_func * new_slot)
-{
-	int rc;
-	u8 class_code;
-	u8 header_type;
-	u32 ID;
-	u8 secondary_bus;
-	int sub_bus;
-	int max_functions;
-	int function;
-	int cloop = 0;
-	int stop_it;
-	struct pci_bus lpci_bus, *pci_bus;
-	memcpy(&lpci_bus, ctrl->pci_dev->subordinate, sizeof(lpci_bus));
-	pci_bus = &lpci_bus;
-	pci_bus->number = new_slot->bus;
-
-	ID = 0xFFFFFFFF;
-
-	pci_bus_read_config_dword(pci_bus, PCI_DEVFN(new_slot->device, 0),
-					PCI_VENDOR_ID, &ID);
-
-	if (ID != 0xFFFFFFFF) {	  /*  device in slot */
-		pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
-					0x0B, &class_code);
-
-		pci_bus_read_config_byte(pci_bus, PCI_DEVFN(new_slot->device, 0),
-					PCI_HEADER_TYPE, &header_type);
-
-		if (header_type & 0x80)	/* Multi-function device */
-			max_functions = 8;
-		else
-			max_functions = 1;
-
-		function = 0;
-
-		do {
-			if ((header_type & 0x7F) == PCI_HEADER_TYPE_BRIDGE) {	  /* PCI-PCI Bridge */
-				/*  Recurse the subordinate bus */
-				pci_bus_read_config_byte(pci_bus,
-					PCI_DEVFN(new_slot->device, function), 
-					PCI_SECONDARY_BUS, &secondary_bus);
-
-				sub_bus = (int) secondary_bus;
-
-				/* Save the config headers for the secondary bus. */
-				rc = pciehp_save_config(ctrl, sub_bus, 0, 0);
-
-				if (rc)
-					return rc;
-
-			}	/* End of IF */
-
-			new_slot->status = 0;
-
-			for (cloop = 0; cloop < 0x20; cloop++) {
-				pci_bus_read_config_dword(pci_bus,
-					PCI_DEVFN(new_slot->device, function), 
-					cloop << 2,
-					(u32 *) &(new_slot->config_space [cloop]));
-			}
-
-			function++;
-
-			stop_it = 0;
-
-			/*  this loop skips to the next present function
-			 *  reading in the Class Code and the Header type.
-			 */
-
-			while ((function < max_functions) && (!stop_it)) {
-				pci_bus_read_config_dword(pci_bus,
-					PCI_DEVFN(new_slot->device, function),
-					PCI_VENDOR_ID, &ID);
-
-				if (ID == 0xFFFFFFFF) {	 /* nothing there. */
-					function++;
-				} else {  /* Something there */
-					pci_bus_read_config_byte(pci_bus,
-						PCI_DEVFN(new_slot->device, function),
-						0x0B, &class_code);
-
-					pci_bus_read_config_byte(pci_bus,
-						PCI_DEVFN(new_slot->device, function),
-						PCI_HEADER_TYPE, &header_type);
-
-					stop_it++;
-				}
-			}
-
-		} while (function < max_functions);
-	}			/* End of IF (device in slot?) */
-	else {
-		return 2;
-	}
-
-	return 0;
-}
-