diff options
author | Jiri Kosina <jkosina@suse.cz> | 2010-12-22 18:57:02 +0100 |
---|---|---|
committer | Jiri Kosina <jkosina@suse.cz> | 2010-12-22 18:57:02 +0100 |
commit | 4b7bd364700d9ac8372eff48832062b936d0793b (patch) | |
tree | 0dbf78c95456a0b02d07fcd473281f04a87e266d /drivers/pci | |
parent | c0d8768af260e2cbb4bf659ae6094a262c86b085 (diff) | |
parent | 90a8a73c06cc32b609a880d48449d7083327e11a (diff) |
Merge branch 'master' into for-next
Conflicts:
MAINTAINERS
arch/arm/mach-omap2/pm24xx.c
drivers/scsi/bfa/bfa_fcpim.c
Needed to update to apply fixes for which the old branch was too
outdated.
Diffstat (limited to 'drivers/pci')
-rw-r--r-- | drivers/pci/Makefile | 1 | ||||
-rw-r--r-- | drivers/pci/bus.c | 53 | ||||
-rw-r--r-- | drivers/pci/dmar.c | 5 | ||||
-rw-r--r-- | drivers/pci/hotplug/ibmphp_ebda.c | 6 | ||||
-rw-r--r-- | drivers/pci/pci-sysfs.c | 23 | ||||
-rw-r--r-- | drivers/pci/pci.c | 12 | ||||
-rw-r--r-- | drivers/pci/pci.h | 7 | ||||
-rw-r--r-- | drivers/pci/proc.c | 3 | ||||
-rw-r--r-- | drivers/pci/quirks.c | 44 | ||||
-rw-r--r-- | drivers/pci/xen-pcifront.c | 6 |
10 files changed, 100 insertions, 60 deletions
diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index f01e344cf4b..98e6fdf34d3 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o obj-$(CONFIG_X86_VISWS) += setup-irq.o obj-$(CONFIG_MN10300) += setup-bus.o obj-$(CONFIG_MICROBLAZE) += setup-bus.o +obj-$(CONFIG_TILE) += setup-bus.o setup-irq.o # # ACPI Related PCI FW Functions diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c index 5624db8c9ad..69546e9213d 100644 --- a/drivers/pci/bus.c +++ b/drivers/pci/bus.c @@ -64,49 +64,6 @@ void pci_bus_remove_resources(struct pci_bus *bus) } } -/* - * Find the highest-address bus resource below the cursor "res". If the - * cursor is NULL, return the highest resource. - */ -static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus, - unsigned int type, - struct resource *res) -{ - struct resource *r, *prev = NULL; - int i; - - pci_bus_for_each_resource(bus, r, i) { - if (!r) - continue; - - if ((r->flags & IORESOURCE_TYPE_BITS) != type) - continue; - - /* If this resource is at or past the cursor, skip it */ - if (res) { - if (r == res) - continue; - if (r->end > res->end) - continue; - if (r->end == res->end && r->start > res->start) - continue; - } - - if (!prev) - prev = r; - - /* - * A small resource is higher than a large one that ends at - * the same address. - */ - if (r->end > prev->end || - (r->end == prev->end && r->start > prev->start)) - prev = r; - } - - return prev; -} - /** * pci_bus_alloc_resource - allocate a resource from a parent bus * @bus: PCI bus @@ -132,10 +89,9 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, resource_size_t), void *alignf_data) { - int ret = -ENOMEM; + int i, ret = -ENOMEM; struct resource *r; resource_size_t max = -1; - unsigned int type = res->flags & IORESOURCE_TYPE_BITS; type_mask |= IORESOURCE_IO | IORESOURCE_MEM; @@ -143,9 +99,10 @@ pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res, if (!(res->flags & IORESOURCE_MEM_64)) max = PCIBIOS_MAX_MEM_32; - /* Look for space at highest addresses first */ - r = pci_bus_find_resource_prev(bus, type, NULL); - for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) { + pci_bus_for_each_resource(bus, r, i) { + if (!r) + continue; + /* type_mask must match */ if ((res->flags ^ r->flags) & type_mask) continue; diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 0157708d474..09933eb9126 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -1417,6 +1417,11 @@ int __init enable_drhd_fault_handling(void) (unsigned long long)drhd->reg_base_addr, ret); return -1; } + + /* + * Clear any previous faults. + */ + dmar_fault(iommu->irq, iommu); } return 0; diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 5becbdee402..2850e64deda 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -276,6 +276,12 @@ int __init ibmphp_access_ebda (void) for (;;) { offset = next_offset; + + /* Make sure what we read is still in the mapped section */ + if (WARN(offset > (ebda_sz * 1024 - 4), + "ibmphp_ebda: next read is beyond ebda_sz\n")) + break; + next_offset = readw (io_mem + offset); /* offset of next blk */ offset += 2; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index b5a7d9bfcb2..63d5042f207 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -705,17 +705,21 @@ void pci_remove_legacy_files(struct pci_bus *b) #ifdef HAVE_PCI_MMAP -int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma) +int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vma, + enum pci_mmap_api mmap_api) { - unsigned long nr, start, size; + unsigned long nr, start, size, pci_start; + if (pci_resource_len(pdev, resno) == 0) + return 0; nr = (vma->vm_end - vma->vm_start) >> PAGE_SHIFT; start = vma->vm_pgoff; size = ((pci_resource_len(pdev, resno) - 1) >> PAGE_SHIFT) + 1; - if (start < size && size - start >= nr) + pci_start = (mmap_api == PCI_MMAP_PROCFS) ? + pci_resource_start(pdev, resno) >> PAGE_SHIFT : 0; + if (start >= pci_start && start < pci_start + size && + start + nr <= pci_start + size) return 1; - WARN(1, "process \"%s\" tried to map 0x%08lx-0x%08lx on %s BAR %d (size 0x%08lx)\n", - current->comm, start, start+nr, pci_name(pdev), resno, size); return 0; } @@ -745,8 +749,15 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, if (i >= PCI_ROM_RESOURCE) return -ENODEV; - if (!pci_mmap_fits(pdev, i, vma)) + if (!pci_mmap_fits(pdev, i, vma, PCI_MMAP_SYSFS)) { + WARN(1, "process \"%s\" tried to map 0x%08lx bytes " + "at page 0x%08lx on %s BAR %d (start 0x%16Lx, size 0x%16Lx)\n", + current->comm, vma->vm_end-vma->vm_start, vma->vm_pgoff, + pci_name(pdev), i, + (u64)pci_resource_start(pdev, i), + (u64)pci_resource_len(pdev, i)); return -EINVAL; + } /* pci_mmap_page_range() expects the same kind of entry as coming * from /proc/bus/pci/ which is a "user visible" value. If this is diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e98c8104297..710c8a29be0 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1007,6 +1007,18 @@ static int __pci_enable_device_flags(struct pci_dev *dev, int err; int i, bars = 0; + /* + * Power state could be unknown at this point, either due to a fresh + * boot or a device removal call. So get the current power state + * so that things like MSI message writing will behave as expected + * (e.g. if the device really is in D0 at enable time). + */ + if (dev->pm_cap) { + u16 pmcsr; + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pmcsr & PCI_PM_CTRL_STATE_MASK); + } + if (atomic_add_return(1, &dev->enable_cnt) > 1) return 0; /* already enabled */ diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index f5c7c382765..7d33f667386 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -22,8 +22,13 @@ extern void pci_remove_firmware_label_files(struct pci_dev *pdev); #endif extern void pci_cleanup_rom(struct pci_dev *dev); #ifdef HAVE_PCI_MMAP +enum pci_mmap_api { + PCI_MMAP_SYSFS, /* mmap on /sys/bus/pci/devices/<BDF>/resource<N> */ + PCI_MMAP_PROCFS /* mmap on /proc/bus/pci/<BDF> */ +}; extern int pci_mmap_fits(struct pci_dev *pdev, int resno, - struct vm_area_struct *vma); + struct vm_area_struct *vmai, + enum pci_mmap_api mmap_api); #endif int pci_probe_reset_function(struct pci_dev *dev); diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c index 297b72c880a..27911b55c2a 100644 --- a/drivers/pci/proc.c +++ b/drivers/pci/proc.c @@ -10,7 +10,6 @@ #include <linux/module.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> -#include <linux/smp_lock.h> #include <linux/capability.h> #include <asm/uaccess.h> #include <asm/byteorder.h> @@ -257,7 +256,7 @@ static int proc_bus_pci_mmap(struct file *file, struct vm_area_struct *vma) /* Make sure the caller is mapping a real resource for this device */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - if (pci_mmap_fits(dev, i, vma)) + if (pci_mmap_fits(dev, i, vma, PCI_MMAP_PROCFS)) break; } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index f5c63fe9db5..53a786fd0d4 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2136,6 +2136,24 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82865_HB, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82875_HB, quirk_unhide_mch_dev6); +#ifdef CONFIG_TILE +/* + * The Tilera TILEmpower platform needs to set the link speed + * to 2.5GT(Giga-Transfers)/s (Gen 1). The default link speed + * setting is 5GT/s (Gen 2). 0x98 is the Link Control2 PCIe + * capability register of the PEX8624 PCIe switch. The switch + * supports link speed auto negotiation, but falsely sets + * the link speed to 5GT/s. + */ +static void __devinit quirk_tile_plx_gen1(struct pci_dev *dev) +{ + if (tile_plx_gen1) { + pci_write_config_dword(dev, 0x98, 0x1); + mdelay(50); + } +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_PLX, 0x8624, quirk_tile_plx_gen1); +#endif /* CONFIG_TILE */ #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting @@ -2311,6 +2329,9 @@ static void __devinit nvbridge_check_legacy_irq_routing(struct pci_dev *dev) { u32 cfg; + if (!pci_find_capability(dev, PCI_CAP_ID_HT)) + return; + pci_read_config_dword(dev, 0x74, &cfg); if (cfg & ((1 << 2) | (1 << 15))) { @@ -2746,6 +2767,29 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_m DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); #endif /*CONFIG_MMC_RICOH_MMC*/ +#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP) +#define VTUNCERRMSK_REG 0x1ac +#define VTD_MSK_SPEC_ERRORS (1 << 31) +/* + * This is a quirk for masking vt-d spec defined errors to platform error + * handling logic. With out this, platforms using Intel 7500, 5500 chipsets + * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based + * on the RAS config settings of the platform) when a vt-d fault happens. + * The resulting SMI caused the system to hang. + * + * VT-d spec related errors are already handled by the VT-d OS code, so no + * need to report the same error through other channels. + */ +static void vtd_mask_spec_errors(struct pci_dev *dev) +{ + u32 word; + + pci_read_config_dword(dev, VTUNCERRMSK_REG, &word); + pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS); +} +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors); +#endif static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end) diff --git a/drivers/pci/xen-pcifront.c b/drivers/pci/xen-pcifront.c index a87c4985326..3a5a6fcc0ea 100644 --- a/drivers/pci/xen-pcifront.c +++ b/drivers/pci/xen-pcifront.c @@ -13,7 +13,6 @@ #include <linux/spinlock.h> #include <linux/pci.h> #include <linux/msi.h> -#include <xen/xenbus.h> #include <xen/interface/io/pciif.h> #include <asm/xen/pci.h> #include <linux/interrupt.h> @@ -576,8 +575,9 @@ static pci_ers_result_t pcifront_common_process(int cmd, pcidev = pci_get_bus_and_slot(bus, devfn); if (!pcidev || !pcidev->driver) { - dev_err(&pcidev->dev, - "device or driver is NULL\n"); + dev_err(&pdev->xdev->dev, "device or AER driver is NULL\n"); + if (pcidev) + pci_dev_put(pcidev); return result; } pdrv = pcidev->driver; |