diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/pcmcia/soc_common.c |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'drivers/pcmcia/soc_common.c')
-rw-r--r-- | drivers/pcmcia/soc_common.c | 850 |
1 files changed, 850 insertions, 0 deletions
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c new file mode 100644 index 00000000000..888b70e6a48 --- /dev/null +++ b/drivers/pcmcia/soc_common.c @@ -0,0 +1,850 @@ +/*====================================================================== + + Common support code for the PCMCIA control functionality of + integrated SOCs like the SA-11x0 and PXA2xx microprocessors. + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is John G. Dorsey + <john+@cs.cmu.edu>. Portions created by John G. Dorsey are + Copyright (C) 1999 John G. Dorsey. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/spinlock.h> +#include <linux/cpufreq.h> + +#include <asm/hardware.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/system.h> + +#include "soc_common.h" + +/* FIXME: platform dependent resource declaration has to move out of this file */ +#ifdef CONFIG_ARCH_PXA +#include <asm/arch/pxa-regs.h> +#endif + +#ifdef DEBUG + +static int pc_debug; +module_param(pc_debug, int, 0644); + +void soc_pcmcia_debug(struct soc_pcmcia_socket *skt, const char *func, + int lvl, const char *fmt, ...) +{ + va_list args; + if (pc_debug > lvl) { + printk(KERN_DEBUG "skt%u: %s: ", skt->nr, func); + va_start(args, fmt); + printk(fmt, args); + va_end(args); + } +} + +#endif + +#define to_soc_pcmcia_socket(x) container_of(x, struct soc_pcmcia_socket, socket) + +static unsigned short +calc_speed(unsigned short *spds, int num, unsigned short dflt) +{ + unsigned short speed = 0; + int i; + + for (i = 0; i < num; i++) + if (speed < spds[i]) + speed = spds[i]; + if (speed == 0) + speed = dflt; + + return speed; +} + +void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, struct soc_pcmcia_timing *timing) +{ + timing->io = calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS); + timing->mem = calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); + timing->attr = calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS); +} +EXPORT_SYMBOL(soc_common_pcmcia_get_timing); + +static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) +{ + struct pcmcia_state state; + unsigned int stat; + + memset(&state, 0, sizeof(struct pcmcia_state)); + + skt->ops->socket_state(skt, &state); + + stat = state.detect ? SS_DETECT : 0; + stat |= state.ready ? SS_READY : 0; + stat |= state.wrprot ? SS_WRPROT : 0; + stat |= state.vs_3v ? SS_3VCARD : 0; + stat |= state.vs_Xv ? SS_XVCARD : 0; + + /* The power status of individual sockets is not available + * explicitly from the hardware, so we just remember the state + * and regurgitate it upon request: + */ + stat |= skt->cs_state.Vcc ? SS_POWERON : 0; + + if (skt->cs_state.flags & SS_IOCARD) + stat |= state.bvd1 ? SS_STSCHG : 0; + else { + if (state.bvd1 == 0) + stat |= SS_BATDEAD; + else if (state.bvd2 == 0) + stat |= SS_BATWARN; + } + return stat; +} + +/* + * soc_common_pcmcia_config_skt + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * + * Convert PCMCIA socket state to our socket configure structure. + */ +static int +soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *state) +{ + int ret; + + ret = skt->ops->configure_socket(skt, state); + if (ret == 0) { + /* + * This really needs a better solution. The IRQ + * may or may not be claimed by the driver. + */ + if (skt->irq_state != 1 && state->io_irq) { + skt->irq_state = 1; + set_irq_type(skt->irq, IRQT_FALLING); + } else if (skt->irq_state == 1 && state->io_irq == 0) { + skt->irq_state = 0; + set_irq_type(skt->irq, IRQT_NOEDGE); + } + + skt->cs_state = *state; + } + + if (ret < 0) + printk(KERN_ERR "soc_common_pcmcia: unable to configure " + "socket %d\n", skt->nr); + + return ret; +} + +/* soc_common_pcmcia_sock_init() + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * + * (Re-)Initialise the socket, turning on status interrupts + * and PCMCIA bus. This must wait for power to stabilise + * so that the card status signals report correctly. + * + * Returns: 0 + */ +static int soc_common_pcmcia_sock_init(struct pcmcia_socket *sock) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + + debug(skt, 2, "initializing socket\n"); + + skt->ops->socket_init(skt); + return 0; +} + + +/* + * soc_common_pcmcia_suspend() + * ^^^^^^^^^^^^^^^^^^^^^^^^^^^ + * + * Remove power on the socket, disable IRQs from the card. + * Turn off status interrupts, and disable the PCMCIA bus. + * + * Returns: 0 + */ +static int soc_common_pcmcia_suspend(struct pcmcia_socket *sock) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + + debug(skt, 2, "suspending socket\n"); + + skt->ops->socket_suspend(skt); + + return 0; +} + +static DEFINE_SPINLOCK(status_lock); + +static void soc_common_check_status(struct soc_pcmcia_socket *skt) +{ + unsigned int events; + + debug(skt, 4, "entering PCMCIA monitoring thread\n"); + + do { + unsigned int status; + unsigned long flags; + + status = soc_common_pcmcia_skt_state(skt); + + spin_lock_irqsave(&status_lock, flags); + events = (status ^ skt->status) & skt->cs_state.csc_mask; + skt->status = status; + spin_unlock_irqrestore(&status_lock, flags); + + debug(skt, 4, "events: %s%s%s%s%s%s\n", + events == 0 ? "<NONE>" : "", + events & SS_DETECT ? "DETECT " : "", + events & SS_READY ? "READY " : "", + events & SS_BATDEAD ? "BATDEAD " : "", + events & SS_BATWARN ? "BATWARN " : "", + events & SS_STSCHG ? "STSCHG " : ""); + + if (events) + pcmcia_parse_events(&skt->socket, events); + } while (events); +} + +/* Let's poll for events in addition to IRQs since IRQ only is unreliable... */ +static void soc_common_pcmcia_poll_event(unsigned long dummy) +{ + struct soc_pcmcia_socket *skt = (struct soc_pcmcia_socket *)dummy; + debug(skt, 4, "polling for events\n"); + + mod_timer(&skt->poll_timer, jiffies + SOC_PCMCIA_POLL_PERIOD); + + soc_common_check_status(skt); +} + + +/* + * Service routine for socket driver interrupts (requested by the + * low-level PCMCIA init() operation via soc_common_pcmcia_thread()). + * The actual interrupt-servicing work is performed by + * soc_common_pcmcia_thread(), largely because the Card Services event- + * handling code performs scheduling operations which cannot be + * executed from within an interrupt context. + */ +static irqreturn_t soc_common_pcmcia_interrupt(int irq, void *dev, struct pt_regs *regs) +{ + struct soc_pcmcia_socket *skt = dev; + + debug(skt, 3, "servicing IRQ %d\n", irq); + + soc_common_check_status(skt); + + return IRQ_HANDLED; +} + + +/* + * Implements the get_status() operation for the in-kernel PCMCIA + * service (formerly SS_GetStatus in Card Services). Essentially just + * fills in bits in `status' according to internal driver state or + * the value of the voltage detect chipselect register. + * + * As a debugging note, during card startup, the PCMCIA core issues + * three set_socket() commands in a row the first with RESET deasserted, + * the second with RESET asserted, and the last with RESET deasserted + * again. Following the third set_socket(), a get_status() command will + * be issued. The kernel is looking for the SS_READY flag (see + * setup_socket(), reset_socket(), and unreset_socket() in cs.c). + * + * Returns: 0 + */ +static int +soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + + skt->status = soc_common_pcmcia_skt_state(skt); + *status = skt->status; + + return 0; +} + + +/* + * Implements the get_socket() operation for the in-kernel PCMCIA + * service (formerly SS_GetSocket in Card Services). Not a very + * exciting routine. + * + * Returns: 0 + */ +static int +soc_common_pcmcia_get_socket(struct pcmcia_socket *sock, socket_state_t *state) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + + debug(skt, 2, "\n"); + + *state = skt->cs_state; + + return 0; +} + +/* + * Implements the set_socket() operation for the in-kernel PCMCIA + * service (formerly SS_SetSocket in Card Services). We more or + * less punt all of this work and let the kernel handle the details + * of power configuration, reset, &c. We also record the value of + * `state' in order to regurgitate it to the PCMCIA core later. + * + * Returns: 0 + */ +static int +soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + + debug(skt, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n", + (state->csc_mask==0)?"<NONE> ":"", + (state->csc_mask&SS_DETECT)?"DETECT ":"", + (state->csc_mask&SS_READY)?"READY ":"", + (state->csc_mask&SS_BATDEAD)?"BATDEAD ":"", + (state->csc_mask&SS_BATWARN)?"BATWARN ":"", + (state->csc_mask&SS_STSCHG)?"STSCHG ":"", + (state->flags==0)?"<NONE> ":"", + (state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"", + (state->flags&SS_IOCARD)?"IOCARD ":"", + (state->flags&SS_RESET)?"RESET ":"", + (state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"", + (state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"", + state->Vcc, state->Vpp, state->io_irq); + + return soc_common_pcmcia_config_skt(skt, state); +} + + +/* + * Implements the set_io_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetIOMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +static int +soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + unsigned short speed = map->speed; + + debug(skt, 2, "map %u speed %u start 0x%08x stop 0x%08x\n", + map->map, map->speed, map->start, map->stop); + debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", + (map->flags==0)?"<NONE>":"", + (map->flags&MAP_ACTIVE)?"ACTIVE ":"", + (map->flags&MAP_16BIT)?"16BIT ":"", + (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", + (map->flags&MAP_0WS)?"0WS ":"", + (map->flags&MAP_WRPROT)?"WRPROT ":"", + (map->flags&MAP_USE_WAIT)?"USE_WAIT ":"", + (map->flags&MAP_PREFETCH)?"PREFETCH ":""); + + if (map->map >= MAX_IO_WIN) { + printk(KERN_ERR "%s(): map (%d) out of range\n", __FUNCTION__, + map->map); + return -1; + } + + if (map->flags & MAP_ACTIVE) { + if (speed == 0) + speed = SOC_PCMCIA_IO_ACCESS; + } else { + speed = 0; + } + + skt->spd_io[map->map] = speed; + skt->ops->set_timing(skt); + + if (map->stop == 1) + map->stop = PAGE_SIZE-1; + + map->stop -= map->start; + map->stop += skt->socket.io_offset; + map->start = skt->socket.io_offset; + + return 0; +} + + +/* + * Implements the set_mem_map() operation for the in-kernel PCMCIA + * service (formerly SS_SetMemMap in Card Services). We configure + * the map speed as requested, but override the address ranges + * supplied by Card Services. + * + * Returns: 0 on success, -1 on error + */ +static int +soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map) +{ + struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock); + struct resource *res; + unsigned short speed = map->speed; + + debug(skt, 2, "map %u speed %u card_start %08x\n", + map->map, map->speed, map->card_start); + debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n", + (map->flags==0)?"<NONE>":"", + (map->flags&MAP_ACTIVE)?"ACTIVE ":"", + (map->flags&MAP_16BIT)?"16BIT ":"", + (map->flags&MAP_AUTOSZ)?"AUTOSZ ":"", + (map->flags&MAP_0WS)?"0WS ":"", + (map->flags&MAP_WRPROT)?"WRPROT ":"", + (map->flags&MAP_ATTRIB)?"ATTRIB ":"", + (map->flags&MAP_USE_WAIT)?"USE_WAIT ":""); + + if (map->map >= MAX_WIN) + return -EINVAL; + + if (map->flags & MAP_ACTIVE) { + if (speed == 0) + speed = 300; + } else { + speed = 0; + } + + if (map->flags & MAP_ATTRIB) { + res = &skt->res_attr; + skt->spd_attr[map->map] = speed; + skt->spd_mem[map->map] = 0; + } else { + res = &skt->res_mem; + skt->spd_attr[map->map] = 0; + skt->spd_mem[map->map] = speed; + } + + skt->ops->set_timing(skt); + + map->static_start = res->start + map->card_start; + + return 0; +} + +struct bittbl { + unsigned int mask; + const char *name; +}; + +static struct bittbl status_bits[] = { + { SS_WRPROT, "SS_WRPROT" }, + { SS_BATDEAD, "SS_BATDEAD" }, + { SS_BATWARN, "SS_BATWARN" }, + { SS_READY, "SS_READY" }, + { SS_DETECT, "SS_DETECT" }, + { SS_POWERON, "SS_POWERON" }, + { SS_STSCHG, "SS_STSCHG" }, + { SS_3VCARD, "SS_3VCARD" }, + { SS_XVCARD, "SS_XVCARD" }, +}; + +static struct bittbl conf_bits[] = { + { SS_PWR_AUTO, "SS_PWR_AUTO" }, + { SS_IOCARD, "SS_IOCARD" }, + { SS_RESET, "SS_RESET" }, + { SS_DMA_MODE, "SS_DMA_MODE" }, + { SS_SPKR_ENA, "SS_SPKR_ENA" }, + { SS_OUTPUT_ENA, "SS_OUTPUT_ENA" }, +}; + +static void +dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, int sz) +{ + char *b = *p; + int i; + + b += sprintf(b, "%-9s:", prefix); + for (i = 0; i < sz; i++) + if (val & bits[i].mask) + b += sprintf(b, " %s", bits[i].name); + *b++ = '\n'; + *p = b; +} + +/* + * Implements the /sys/class/pcmcia_socket/??/status file. + * + * Returns: the number of characters added to the buffer + */ +static ssize_t show_status(struct class_device *class_dev, char *buf) +{ + struct soc_pcmcia_socket *skt = + container_of(class_dev, struct soc_pcmcia_socket, socket.dev); + char *p = buf; + + p+=sprintf(p, "slot : %d\n", skt->nr); + + dump_bits(&p, "status", skt->status, + status_bits, ARRAY_SIZE(status_bits)); + dump_bits(&p, "csc_mask", skt->cs_state.csc_mask, + status_bits, ARRAY_SIZE(status_bits)); + dump_bits(&p, "cs_flags", skt->cs_state.flags, + conf_bits, ARRAY_SIZE(conf_bits)); + + p+=sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc); + p+=sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp); + p+=sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq, skt->irq); + if (skt->ops->show_timing) + p+=skt->ops->show_timing(skt, p); + + return p-buf; +} +static CLASS_DEVICE_ATTR(status, S_IRUGO, show_status, NULL); + + +static struct pccard_operations soc_common_pcmcia_operations = { + .init = soc_common_pcmcia_sock_init, + .suspend = soc_common_pcmcia_suspend, + .get_status = soc_common_pcmcia_get_status, + .get_socket = soc_common_pcmcia_get_socket, + .set_socket = soc_common_pcmcia_set_socket, + .set_io_map = soc_common_pcmcia_set_io_map, + .set_mem_map = soc_common_pcmcia_set_mem_map, +}; + + +int soc_pcmcia_request_irqs(struct soc_pcmcia_socket *skt, + struct pcmcia_irqs *irqs, int nr) +{ + int i, res = 0; + + for (i = 0; i < nr; i++) { + if (irqs[i].sock != skt->nr) + continue; + res = request_irq(irqs[i].irq, soc_common_pcmcia_interrupt, + SA_INTERRUPT, irqs[i].str, skt); + if (res) + break; + set_irq_type(irqs[i].irq, IRQT_NOEDGE); + } + + if (res) { + printk(KERN_ERR "PCMCIA: request for IRQ%d failed (%d)\n", + irqs[i].irq, res); + + while (i--) + if (irqs[i].sock == skt->nr) + free_irq(irqs[i].irq, skt); + } + return res; +} +EXPORT_SYMBOL(soc_pcmcia_request_irqs); + +void soc_pcmcia_free_irqs(struct soc_pcmcia_socket *skt, + struct pcmcia_irqs *irqs, int nr) +{ + int i; + + for (i = 0; i < nr; i++) + if (irqs[i].sock == skt->nr) + free_irq(irqs[i].irq, skt); +} +EXPORT_SYMBOL(soc_pcmcia_free_irqs); + +void soc_pcmcia_disable_irqs(struct soc_pcmcia_socket *skt, + struct pcmcia_irqs *irqs, int nr) +{ + int i; + + for (i = 0; i < nr; i++) + if (irqs[i].sock == skt->nr) + set_irq_type(irqs[i].irq, IRQT_NOEDGE); +} +EXPORT_SYMBOL(soc_pcmcia_disable_irqs); + +void soc_pcmcia_enable_irqs(struct soc_pcmcia_socket *skt, + struct pcmcia_irqs *irqs, int nr) +{ + int i; + + for (i = 0; i < nr; i++) + if (irqs[i].sock == skt->nr) { + set_irq_type(irqs[i].irq, IRQT_RISING); + set_irq_type(irqs[i].irq, IRQT_BOTHEDGE); + } +} +EXPORT_SYMBOL(soc_pcmcia_enable_irqs); + + +LIST_HEAD(soc_pcmcia_sockets); +DECLARE_MUTEX(soc_pcmcia_sockets_lock); + +static const char *skt_names[] = { + "PCMCIA socket 0", + "PCMCIA socket 1", +}; + +struct skt_dev_info { + int nskt; + struct soc_pcmcia_socket skt[0]; +}; + +#define SKT_DEV_INFO_SIZE(n) \ + (sizeof(struct skt_dev_info) + (n)*sizeof(struct soc_pcmcia_socket)) + +#ifdef CONFIG_CPU_FREQ +static int +soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data) +{ + struct soc_pcmcia_socket *skt; + struct cpufreq_freqs *freqs = data; + int ret = 0; + + down(&soc_pcmcia_sockets_lock); + list_for_each_entry(skt, &soc_pcmcia_sockets, node) + if ( skt->ops->frequency_change ) + ret += skt->ops->frequency_change(skt, val, freqs); + up(&soc_pcmcia_sockets_lock); + + return ret; +} + +static struct notifier_block soc_pcmcia_notifier_block = { + .notifier_call = soc_pcmcia_notifier +}; + +static int soc_pcmcia_cpufreq_register(void) +{ + int ret; + + ret = cpufreq_register_notifier(&soc_pcmcia_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + if (ret < 0) + printk(KERN_ERR "Unable to register CPU frequency change " + "notifier for PCMCIA (%d)\n", ret); + return ret; +} + +static void soc_pcmcia_cpufreq_unregister(void) +{ + cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +#define soc_pcmcia_cpufreq_register() +#define soc_pcmcia_cpufreq_unregister() +#endif + +int soc_common_drv_pcmcia_probe(struct device *dev, struct pcmcia_low_level *ops, int first, int nr) +{ + struct skt_dev_info *sinfo; + struct soc_pcmcia_socket *skt; + int ret, i; + + down(&soc_pcmcia_sockets_lock); + + sinfo = kmalloc(SKT_DEV_INFO_SIZE(nr), GFP_KERNEL); + if (!sinfo) { + ret = -ENOMEM; + goto out; + } + + memset(sinfo, 0, SKT_DEV_INFO_SIZE(nr)); + sinfo->nskt = nr; + + /* + * Initialise the per-socket structure. + */ + for (i = 0; i < nr; i++) { + skt = &sinfo->skt[i]; + + skt->socket.ops = &soc_common_pcmcia_operations; + skt->socket.owner = ops->owner; + skt->socket.dev.dev = dev; + + init_timer(&skt->poll_timer); + skt->poll_timer.function = soc_common_pcmcia_poll_event; + skt->poll_timer.data = (unsigned long)skt; + skt->poll_timer.expires = jiffies + SOC_PCMCIA_POLL_PERIOD; + + skt->nr = first + i; + skt->irq = NO_IRQ; + skt->dev = dev; + skt->ops = ops; + + skt->res_skt.start = _PCMCIA(skt->nr); + skt->res_skt.end = _PCMCIA(skt->nr) + PCMCIASp - 1; + skt->res_skt.name = skt_names[skt->nr]; + skt->res_skt.flags = IORESOURCE_MEM; + + ret = request_resource(&iomem_resource, &skt->res_skt); + if (ret) + goto out_err_1; + + skt->res_io.start = _PCMCIAIO(skt->nr); + skt->res_io.end = _PCMCIAIO(skt->nr) + PCMCIAIOSp - 1; + skt->res_io.name = "io"; + skt->res_io.flags = IORESOURCE_MEM | IORESOURCE_BUSY; + + ret = request_resource(&skt->res_skt, &skt->res_io); + if (ret) + goto out_err_2; + + skt->res_mem.start = _PCMCIAMem(skt->nr); + skt->res_mem.end = _PCMCIAMem(skt->nr) + PCMCIAMemSp - 1; + skt->res_mem.name = "memory"; + skt->res_mem.flags = IORESOURCE_MEM; + + ret = request_resource(&skt->res_skt, &skt->res_mem); + if (ret) + goto out_err_3; + + skt->res_attr.start = _PCMCIAAttr(skt->nr); + skt->res_attr.end = _PCMCIAAttr(skt->nr) + PCMCIAAttrSp - 1; + skt->res_attr.name = "attribute"; + skt->res_attr.flags = IORESOURCE_MEM; + + ret = request_resource(&skt->res_skt, &skt->res_attr); + if (ret) + goto out_err_4; + + skt->virt_io = ioremap(skt->res_io.start, 0x10000); + if (skt->virt_io == NULL) { + ret = -ENOMEM; + goto out_err_5; + } + + if ( list_empty(&soc_pcmcia_sockets) ) + soc_pcmcia_cpufreq_register(); + + list_add(&skt->node, &soc_pcmcia_sockets); + + /* + * We initialize default socket timing here, because + * we are not guaranteed to see a SetIOMap operation at + * runtime. + */ + ops->set_timing(skt); + + ret = ops->hw_init(skt); + if (ret) + goto out_err_6; + + skt->socket.features = SS_CAP_STATIC_MAP|SS_CAP_PCCARD; + skt->socket.resource_ops = &pccard_static_ops; + skt->socket.irq_mask = 0; + skt->socket.map_size = PAGE_SIZE; + skt->socket.pci_irq = skt->irq; + skt->socket.io_offset = (unsigned long)skt->virt_io; + + skt->status = soc_common_pcmcia_skt_state(skt); + + ret = pcmcia_register_socket(&skt->socket); + if (ret) + goto out_err_7; + + WARN_ON(skt->socket.sock != i); + + add_timer(&skt->poll_timer); + + class_device_create_file(&skt->socket.dev, &class_device_attr_status); + } + + dev_set_drvdata(dev, sinfo); + ret = 0; + goto out; + + do { + skt = &sinfo->skt[i]; + + del_timer_sync(&skt->poll_timer); + pcmcia_unregister_socket(&skt->socket); + + out_err_7: + flush_scheduled_work(); + + ops->hw_shutdown(skt); + out_err_6: + list_del(&skt->node); + iounmap(skt->virt_io); + out_err_5: + release_resource(&skt->res_attr); + out_err_4: + release_resource(&skt->res_mem); + out_err_3: + release_resource(&skt->res_io); + out_err_2: + release_resource(&skt->res_skt); + out_err_1: + i--; + } while (i > 0); + + kfree(sinfo); + + out: + up(&soc_pcmcia_sockets_lock); + return ret; +} + +int soc_common_drv_pcmcia_remove(struct device *dev) +{ + struct skt_dev_info *sinfo = dev_get_drvdata(dev); + int i; + + dev_set_drvdata(dev, NULL); + + down(&soc_pcmcia_sockets_lock); + for (i = 0; i < sinfo->nskt; i++) { + struct soc_pcmcia_socket *skt = &sinfo->skt[i]; + + del_timer_sync(&skt->poll_timer); + + pcmcia_unregister_socket(&skt->socket); + + flush_scheduled_work(); + + skt->ops->hw_shutdown(skt); + + soc_common_pcmcia_config_skt(skt, &dead_socket); + + list_del(&skt->node); + iounmap(skt->virt_io); + skt->virt_io = NULL; + release_resource(&skt->res_attr); + release_resource(&skt->res_mem); + release_resource(&skt->res_io); + release_resource(&skt->res_skt); + } + if ( list_empty(&soc_pcmcia_sockets) ) + soc_pcmcia_cpufreq_unregister(); + + up(&soc_pcmcia_sockets_lock); + + kfree(sinfo); + + return 0; +} |