Merge tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control changes from Linus Walleij:

 - A large slew of improvements of the Genric pin configuration support,
   and deployment in four different platforms: Rockchip, Super-H PFC,
   ABx500 and TZ1090.  Support BIAS_BUS_HOLD, get device tree parsing
   and debugfs support into shape.

 - We also have device tree support with generic naming conventions for
   the generic pin configuration.

 - Delete the unused and confusing direct pinconf API.  Now state
   transitions is *the* way to control pins and multiplexing.

 - New drivers for Rockchip, TZ1090, and TZ1090 PDC.

 - Two pin control states related to power management are now handled in
   the device core: "sleep" and "idle", removing a lot of boilerplate
   code in drivers.  We do not yet know if this is the final word for
   pin PM, but it already make things a lot easier to handle.

 - Handle sparse GPIO ranges passing a list of disparate pins, and
   utilize these in the new BayTrail (x86 Atom SoC) driver.

 - Make the sunxi (AllWinner) driver handle external interrupts.

 - Make it possible for pinctrl-single to handle the case where several
   pins are managed by a single register, and augment it to handle sleep
   modes.

 - Cleanups and improvements for the abx500 drivers.

 - Move Sirf pin control drivers to their own directory, support
   save/restore of context and add support for the SiRFatlas6 SoC.

 - PMU muxing for the Dove pinctrl driver.

 - Finalization and support for VF610 in the i.MX6 pinctrl driver.

 - Smoothen out various Exynos rough edges.

 - Generic cleanups of various kinds.

* tag 'pinctrl-for-v3.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (82 commits)
  pinctrl: vt8500: wmt: remove redundant dev_err call in wmt_pinctrl_probe()
  pinctrl: remove bindings for pinconf options needing more thought
  pinctrl: remove slew-rate parameter from tz1090
  pinctrl: set unit for debounce time pinconfig to usec
  pinctrl: more clarifications for generic pull configs
  pinctrl: rip out the direct pinconf API
  pinctrl-tz1090-pdc: add TZ1090 PDC pinctrl driver
  pinctrl-tz1090: add TZ1090 pinctrl driver
  pinctrl: samsung: Staticize drvdata_list
  pinctrl: rockchip: Add missing irq_gc_unlock() call before return error
  pinctrl: abx500: rework error path
  pinctrl: abx500: suppress hardcoded value
  pinctrl: abx500: factorize code
  pinctrl: abx500: fix abx500_gpio_get()
  pinctrl: abx500: fix abx500_pin_config_set()
  pinctrl: abx500: Add device tree support
  sh-pfc: Guard DT parsing with #ifdef CONFIG_OF
  pinctrl: add Intel BayTrail GPIO/pinctrl support
  pinctrl: fix pinconf_ops::pin_config_dbg_parse_modify kerneldoc
  pinctrl: Staticize local symbols
  ...

Conflicts:
	drivers/net/ethernet/ti/davinci_mdio.c
	drivers/pinctrl/Makefile

1 files changed, 38 insertions, 0 deletions

diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 19396c8ffe4..5a8ad513931 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -58,6 +58,18 @@ config PINCTRL_AT91
 	help
 	  Say Y here to enable the at91 pinctrl driver
 
+config PINCTRL_BAYTRAIL
+	bool "Intel Baytrail GPIO pin control"
+	depends on GPIOLIB && ACPI && X86
+        select IRQ_DOMAIN
+	help
+	  driver for memory mapped GPIO functionality on Intel Baytrail
+	  platforms. Supports 3 banks with 102, 28 and 44 gpios.
+	  Most pins are usually muxed to some other functionality by firmware,
+	  so only a small amount is available for gpio use.
+
+	  Requires ACPI device enumeration code to set up a platform device.
+
 config PINCTRL_BCM2835
 	bool
 	select PINMUX
@@ -108,6 +120,14 @@ config PINCTRL_IMX6SL
 	help
 	  Say Y here to enable the imx6sl pinctrl driver
 
+config PINCTRL_VF610
+	bool "Freescale Vybrid VF610 pinctrl driver"
+	depends on OF
+	depends on SOC_VF610
+	select PINCTRL_IMX
+	help
+	  Say Y here to enable the Freescale Vybrid VF610 pinctrl driver
+
 config PINCTRL_LANTIQ
 	bool
 	depends on LANTIQ
@@ -150,6 +170,12 @@ config PINCTRL_DB8540
 	bool "DB8540 pin controller driver"
 	depends on PINCTRL_NOMADIK && ARCH_U8500
 
+config PINCTRL_ROCKCHIP
+	bool
+	select PINMUX
+	select GENERIC_PINCONF
+	select GENERIC_IRQ_CHIP
+
 config PINCTRL_SINGLE
 	tristate "One-register-per-pin type device tree based pinctrl driver"
 	depends on OF
@@ -192,6 +218,18 @@ config PINCTRL_TEGRA114
 	bool
 	select PINCTRL_TEGRA
 
+config PINCTRL_TZ1090
+	bool "Toumaz Xenif TZ1090 pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select GENERIC_PINCONF
+
+config PINCTRL_TZ1090_PDC
+	bool "Toumaz Xenif TZ1090 PDC pin control driver"
+	depends on SOC_TZ1090
+	select PINMUX
+	select PINCONF
+
 config PINCTRL_U300
 	bool "U300 pin controller driver"
 	depends on ARCH_U300