Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC device tree conversions and enablement from Olof Johansson:
 "Continued device tree conversion and enablement across a number of
  platforms; Kirkwood, tegra, i.MX, Exynos, zynq and a couple of other
  smaller series as well.

  ux500 has seen continued conversion for platforms.  Several platforms
  have seen pinctrl-via-devicetree conversions for simpler
  multiplatform.  Tegra is adding data for new devices/drivers, and
  Exynos has a bunch of new bindings and devices added as well.

  So, pretty much the same progression in the right direction as the
  last few releases."

Fix up conflicts as per Olof.

* tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (185 commits)
  ARM: ux500: Rename dbx500 cpufreq code to be more generic
  ARM: dts: add missing ux500 device trees
  ARM: ux500: Stop registering the PCM driver from platform code
  ARM: ux500: Move board specific GPIO info out to subordinate DTS files
  ARM: ux500: Disable the MMCI gpio-regulator by default
  ARM: Kirkwood: remove kirkwood_ehci_init() from new boards
  ARM: Kirkwood: Add support LED of OpenBlocks A6
  ARM: Kirkwood: Convert to EHCI via DT for OpenBlocks A6
  ARM: kirkwood: Add NAND partiton map for OpenBlocks A6
  ARM: kirkwood: Add support second I2C bus and RTC on OpenBlocks A6
  ARM: kirkwood: Add support DT of second I2C bus
  ARM: kirkwood: Convert mplcec4 board to pinctrl
  ARM: Kirkwood: Convert km_kirkwood to pinctrl
  ARM: Kirkwood: support 98DX412x kirkwoods with pinctrl
  ARM: Kirkwood: Convert IX2-200 to pinctrl.
  ARM: Kirkwood: Convert lsxl boards to pinctrl.
  ARM: Kirkwood: Convert ib62x0 to pinctrl.
  ARM: Kirkwood: Convert GoFlex Net to pinctrl.
  ARM: Kirkwood: Convert dreamplug to pinctrl.
  ARM: Kirkwood: Convert dockstar to pinctrl.
  ...

1 files changed, 15 insertions, 7 deletions

diff --git a/drivers/pinctrl/mvebu/pinctrl-dove.c b/drivers/pinctrl/mvebu/pinctrl-dove.c
index ffe74b27d66..40c9c3eecd9 100644
--- a/drivers/pinctrl/mvebu/pinctrl-dove.c
+++ b/drivers/pinctrl/mvebu/pinctrl-dove.c
@@ -22,22 +22,22 @@
 
 #include "pinctrl-mvebu.h"
 
-#define DOVE_SB_REGS_VIRT_BASE		0xfde00000
-#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0200)
+#define DOVE_SB_REGS_VIRT_BASE		IOMEM(0xfde00000)
+#define DOVE_MPP_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0200)
 #define DOVE_PMU_MPP_GENERAL_CTRL	(DOVE_MPP_VIRT_BASE + 0x10)
 #define  DOVE_AU0_AC97_SEL		BIT(16)
-#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE | 0xe802C)
+#define DOVE_GLOBAL_CONFIG_1		(DOVE_SB_REGS_VIRT_BASE + 0xe802C)
 #define  DOVE_TWSI_ENABLE_OPTION1	BIT(7)
-#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE | 0xe8030)
+#define DOVE_GLOBAL_CONFIG_2		(DOVE_SB_REGS_VIRT_BASE + 0xe8030)
 #define  DOVE_TWSI_ENABLE_OPTION2	BIT(20)
 #define  DOVE_TWSI_ENABLE_OPTION3	BIT(21)
 #define  DOVE_TWSI_OPTION3_GPIO		BIT(22)
-#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE | 0xe8034)
+#define DOVE_SSP_CTRL_STATUS_1		(DOVE_SB_REGS_VIRT_BASE + 0xe8034)
 #define  DOVE_SSP_ON_AU1		BIT(0)
-#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE | 0xe803c)
+#define DOVE_MPP_GENERAL_VIRT_BASE	(DOVE_SB_REGS_VIRT_BASE + 0xe803c)
 #define  DOVE_AU1_SPDIFO_GPIO_EN	BIT(1)
 #define  DOVE_NAND_GPIO_EN		BIT(0)
-#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE | 0xd0400)
+#define DOVE_GPIO_LO_VIRT_BASE		(DOVE_SB_REGS_VIRT_BASE + 0xd0400)
 #define DOVE_MPP_CTRL4_VIRT_BASE	(DOVE_GPIO_LO_VIRT_BASE + 0x40)
 #define  DOVE_SPI_GPIO_SEL		BIT(5)
 #define  DOVE_UART1_GPIO_SEL		BIT(4)
@@ -234,6 +234,14 @@ static int dove_audio1_ctrl_set(struct mvebu_mpp_ctrl *ctrl,
 	unsigned long gmpp = readl(DOVE_MPP_GENERAL_VIRT_BASE);
 	unsigned long gcfg2 = readl(DOVE_GLOBAL_CONFIG_2);
 
+	/*
+	 * clear all audio1 related bits before configure
+	 */
+	gcfg2 &= ~DOVE_TWSI_OPTION3_GPIO;
+	gmpp &= ~DOVE_AU1_SPDIFO_GPIO_EN;
+	sspc1 &= ~DOVE_SSP_ON_AU1;
+	mpp4 &= ~DOVE_AU1_GPIO_SEL;
+
 	if (config & BIT(0))
 		gcfg2 |= DOVE_TWSI_OPTION3_GPIO;
 	if (config & BIT(1))