diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-21 10:14:10 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2014-01-21 10:14:10 -0800 |
commit | a547df99aad777c1807e23991fa2471693c0e4cc (patch) | |
tree | 8e0a198648483580c9a7aa40efa4927c282fa4b1 /drivers/pinctrl/pinctrl-msm.h | |
parent | 8e5096607280d4e103389bfe8f8b7decbf538ff6 (diff) | |
parent | fa8cf57c923e86a693a85aff1df579245a27cbb3 (diff) |
Merge tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull bulk pin control changes from Linus Walleij:
"This has been queued and tested for a while. Lots of action here,
like in the GPIO tree, embedded stuff like this is really hot now it
seems. Details in the signed tag. I'm especially happy about the
Qualcomm driver as it is used in such a huge subset of mobile handsets
out there, and these platforms in general need better upstream support
- New driver for the Qualcomm TLMM pin controller and its msm8x74
subdriver.
- New driver for the Broadcom Capri BCM281xx SoC.
- New subdriver for the imx25 pin controller.
- New subdriver for the Tegra124 pin controller.
- Lock GPIO lines as IRQs for select combined pin control and GPIO
drivers for baytrail and sirf.
- Some semi-big refactorings and extenstions to the sirf driver.
- Lots of patching, cleanup and fixing in the Renesas "PFC" driver
and associated subdrivers as usual. It is settling down a little
bit now it seems.
- Minor fixes and incremental updates here and there as usual"
* tag 'pinctrl-v3.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (72 commits)
pinctrl: sunxi: Honor GPIO output initial vaules
pinctrl: capri: add dependency on OF
ARM: bcm11351: Enable pinctrl for Broadcom Capri SoCs
ARM: pinctrl: Add Broadcom Capri pinctrl driver
pinctrl: Add pinctrl binding for Broadcom Capri SoCs
pinctrl: Add void * to pinctrl_pin_desc
pinctrl: st: Fix a typo in probe
pinctrl: Fix some typos and grammar issues in the documentation
pinctrl: sirf: lock IRQs when starting them
pinctrl: sirf: put gpio interrupt pin into input status automatically
pinctrl: sirf: use only one irq_domain for the whole device node
pinctrl: single: fix infinite loop caused by bad mask
pinctrl: single: fix pcs_disable with bits_per_mux
pinctrl: single: fix DT bindings documentation
pinctrl: as3722: Set pin to output mode for some function
pinctrl: sirf: add pin group for USP0 with only RX or TX frame sync
pinctrl: sirf: fix the pins of sdmmc5 connected with TriG
pinctrl: sirf: add lost usp1_uart_nostreamctrl group for atlas6
pinctrl: sunxi: Add Allwinner A20 clock output pin functions
pinctrl/lantiq: fix typo
...
Diffstat (limited to 'drivers/pinctrl/pinctrl-msm.h')
-rw-r--r-- | drivers/pinctrl/pinctrl-msm.h | 122 |
1 files changed, 122 insertions, 0 deletions
diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h new file mode 100644 index 00000000000..206e782e2da --- /dev/null +++ b/drivers/pinctrl/pinctrl-msm.h @@ -0,0 +1,122 @@ +/* + * Copyright (c) 2013, Sony Mobile Communications AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +#ifndef __PINCTRL_MSM_H__ +#define __PINCTRL_MSM_H__ + +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/machine.h> + +/** + * struct msm_function - a pinmux function + * @name: Name of the pinmux function. + * @groups: List of pingroups for this function. + * @ngroups: Number of entries in @groups. + */ +struct msm_function { + const char *name; + const char * const *groups; + unsigned ngroups; +}; + +/** + * struct msm_pingroup - Qualcomm pingroup definition + * @name: Name of the pingroup. + * @pins: A list of pins assigned to this pingroup. + * @npins: Number of entries in @pins. + * @funcs: A list of pinmux functions that can be selected for + * this group. The index of the selected function is used + * for programming the function selector. + * Entries should be indices into the groups list of the + * struct msm_pinctrl_soc_data. + * @ctl_reg: Offset of the register holding control bits for this group. + * @io_reg: Offset of the register holding input/output bits for this group. + * @intr_cfg_reg: Offset of the register holding interrupt configuration bits. + * @intr_status_reg: Offset of the register holding the status bits for this group. + * @intr_target_reg: Offset of the register specifying routing of the interrupts + * from this group. + * @mux_bit: Offset in @ctl_reg for the pinmux function selection. + * @pull_bit: Offset in @ctl_reg for the bias configuration. + * @drv_bit: Offset in @ctl_reg for the drive strength configuration. + * @oe_bit: Offset in @ctl_reg for controlling output enable. + * @in_bit: Offset in @io_reg for the input bit value. + * @out_bit: Offset in @io_reg for the output bit value. + * @intr_enable_bit: Offset in @intr_cfg_reg for enabling the interrupt for this group. + * @intr_status_bit: Offset in @intr_status_reg for reading and acking the interrupt + * status. + * @intr_target_bit: Offset in @intr_target_reg for configuring the interrupt routing. + * @intr_raw_status_bit: Offset in @intr_cfg_reg for the raw status bit. + * @intr_polarity_bit: Offset in @intr_cfg_reg for specifying polarity of the interrupt. + * @intr_detection_bit: Offset in @intr_cfg_reg for specifying interrupt type. + * @intr_detection_width: Number of bits used for specifying interrupt type, + * Should be 2 for SoCs that can detect both edges in hardware, + * otherwise 1. + */ +struct msm_pingroup { + const char *name; + const unsigned *pins; + unsigned npins; + + unsigned funcs[8]; + + s16 ctl_reg; + s16 io_reg; + s16 intr_cfg_reg; + s16 intr_status_reg; + s16 intr_target_reg; + + unsigned mux_bit:5; + + unsigned pull_bit:5; + unsigned drv_bit:5; + + unsigned oe_bit:5; + unsigned in_bit:5; + unsigned out_bit:5; + + unsigned intr_enable_bit:5; + unsigned intr_status_bit:5; + + unsigned intr_target_bit:5; + unsigned intr_raw_status_bit:5; + unsigned intr_polarity_bit:5; + unsigned intr_detection_bit:5; + unsigned intr_detection_width:5; +}; + +/** + * struct msm_pinctrl_soc_data - Qualcomm pin controller driver configuration + * @pins: An array describing all pins the pin controller affects. + * @npins: The number of entries in @pins. + * @functions: An array describing all mux functions the SoC supports. + * @nfunctions: The number of entries in @functions. + * @groups: An array describing all pin groups the pin SoC supports. + * @ngroups: The numbmer of entries in @groups. + * @ngpio: The number of pingroups the driver should expose as GPIOs. + */ +struct msm_pinctrl_soc_data { + const struct pinctrl_pin_desc *pins; + unsigned npins; + const struct msm_function *functions; + unsigned nfunctions; + const struct msm_pingroup *groups; + unsigned ngroups; + unsigned ngpios; +}; + +int msm_pinctrl_probe(struct platform_device *pdev, + const struct msm_pinctrl_soc_data *soc_data); +int msm_pinctrl_remove(struct platform_device *pdev); + +#endif |