Merge tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late changes from Arnd Bergmann:
 "These are changes that arrived a little late before the merge window
  or that have multiple dependencies on previous branches so they did
  not fit into one of the earlier ones.  There are 10 branches merged
  here, a total of 39 non-merge commits.  Contents are a mixed bag for
  the above reasons:

   * Two new SoC platforms: ST microelectronics stixxxx and the TI
     'Nspire' graphing calculator.  These should have been in the 'soc'
     branch but were a little late
   * Support for the Exynos 5420 variant in mach-exynos, which is based
     on the other exynos branches to avoid conflicts.
   * Various small changes for sh-mobile, ux500 and davinci
   * Common clk support for MSM"

* tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits)
  ARM: ux500: bail out on alien cpus
  ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins
  serial: sh-sci: Initialise variables before access in sci_set_termios()
  ARM: stih41x: Add B2020 board support
  ARM: stih41x: Add B2000 board support
  ARM: sti: Add DEBUG_LL console support
  ARM: sti: Add STiH416 SOC support
  ARM: sti: Add STiH415 SOC support
  ARM: msm: Migrate to common clock framework
  ARM: msm: Make proc_comm clock control into a platform driver
  ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver
  ARM: msm: Remove clock-7x30.h include file
  ARM: msm: Remove custom clk_set_{max,min}_rate() API
  ARM: msm: Remove custom clk_set_flags() API
  msm: iommu: Use clk_set_rate() instead of clk_set_min_rate()
  msm: iommu: Convert to clk_prepare/unprepare
  msm_sdcc: Convert to clk_prepare/unprepare
  usb: otg: msm: Convert to clk_prepare/unprepare
  msm_serial: Use devm_clk_get() and properly return errors
  msm_serial: Convert to clk_prepare/unprepare
  ...

3 files changed, 121 insertions, 0 deletions

diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
index 2d76f66a2e0..5f58cf0e96e 100644
--- a/drivers/pinctrl/pinctrl-exynos.c
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -941,3 +941,121 @@ struct samsung_pin_ctrl exynos5250_pin_ctrl[] = {
 		.label		= "exynos5250-gpio-ctrl3",
 	},
 };
+
+/* pin banks of exynos5420 pin-controller 0 */
+static struct samsung_pin_bank exynos5420_pin_banks0[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpy7", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC00, "gpx0", 0x00),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC20, "gpx1", 0x04),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC40, "gpx2", 0x08),
+	EXYNOS_PIN_BANK_EINTW(8, 0xC60, "gpx3", 0x0c),
+};
+
+/* pin banks of exynos5420 pin-controller 1 */
+static struct samsung_pin_bank exynos5420_pin_banks1[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpc0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(8, 0x020, "gpc1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(7, 0x040, "gpc2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(4, 0x060, "gpc3", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(2, 0x080, "gpc4", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpd1", 0x14),
+	EXYNOS_PIN_BANK_EINTN(6, 0x0C0, "gpy0"),
+	EXYNOS_PIN_BANK_EINTN(4, 0x0E0, "gpy1"),
+	EXYNOS_PIN_BANK_EINTN(6, 0x100, "gpy2"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x120, "gpy3"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x140, "gpy4"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x160, "gpy5"),
+	EXYNOS_PIN_BANK_EINTN(8, 0x180, "gpy6"),
+};
+
+/* pin banks of exynos5420 pin-controller 2 */
+static struct samsung_pin_bank exynos5420_pin_banks2[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpe0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(2, 0x020, "gpe1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(6, 0x040, "gpf0", 0x08),
+	EXYNOS_PIN_BANK_EINTG(8, 0x060, "gpf1", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x080, "gpg0", 0x10),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0A0, "gpg1", 0x14),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0C0, "gpg2", 0x18),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0E0, "gpj4", 0x1c),
+};
+
+/* pin banks of exynos5420 pin-controller 3 */
+static struct samsung_pin_bank exynos5420_pin_banks3[] = {
+	EXYNOS_PIN_BANK_EINTG(8, 0x000, "gpa0", 0x00),
+	EXYNOS_PIN_BANK_EINTG(6, 0x020, "gpa1", 0x04),
+	EXYNOS_PIN_BANK_EINTG(8, 0x040, "gpa2", 0x08),
+	EXYNOS_PIN_BANK_EINTG(5, 0x060, "gpb0", 0x0c),
+	EXYNOS_PIN_BANK_EINTG(5, 0x080, "gpb1", 0x10),
+	EXYNOS_PIN_BANK_EINTG(4, 0x0A0, "gpb2", 0x14),
+	EXYNOS_PIN_BANK_EINTG(8, 0x0C0, "gpb3", 0x18),
+	EXYNOS_PIN_BANK_EINTG(2, 0x0E0, "gpb4", 0x1c),
+	EXYNOS_PIN_BANK_EINTG(8, 0x100, "gph0", 0x20),
+};
+
+/* pin banks of exynos5420 pin-controller 4 */
+static struct samsung_pin_bank exynos5420_pin_banks4[] = {
+	EXYNOS_PIN_BANK_EINTG(7, 0x000, "gpz", 0x00),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos5420 SoC. Exynos5420 SoC includes
+ * four gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos5420_pin_ctrl[] = {
+	{
+		/* pin-controller instance 0 data */
+		.pin_banks	= exynos5420_pin_banks0,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks0),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.weint_con	= EXYNOS_WKUP_ECON_OFFSET,
+		.weint_mask	= EXYNOS_WKUP_EMASK_OFFSET,
+		.weint_pend	= EXYNOS_WKUP_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.eint_wkup_init = exynos_eint_wkup_init,
+		.label		= "exynos5420-gpio-ctrl0",
+	}, {
+		/* pin-controller instance 1 data */
+		.pin_banks	= exynos5420_pin_banks1,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks1),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl1",
+	}, {
+		/* pin-controller instance 2 data */
+		.pin_banks	= exynos5420_pin_banks2,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks2),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl2",
+	}, {
+		/* pin-controller instance 3 data */
+		.pin_banks	= exynos5420_pin_banks3,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks3),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl3",
+	}, {
+		/* pin-controller instance 4 data */
+		.pin_banks	= exynos5420_pin_banks4,
+		.nr_banks	= ARRAY_SIZE(exynos5420_pin_banks4),
+		.geint_con	= EXYNOS_GPIO_ECON_OFFSET,
+		.geint_mask	= EXYNOS_GPIO_EMASK_OFFSET,
+		.geint_pend	= EXYNOS_GPIO_EPEND_OFFSET,
+		.svc		= EXYNOS_SVC_OFFSET,
+		.eint_gpio_init = exynos_eint_gpio_init,
+		.label		= "exynos5420-gpio-ctrl4",
+	},
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
index e67ff1b8042..0a6c720b665 100644
--- a/drivers/pinctrl/pinctrl-samsung.c
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -1113,6 +1113,8 @@ static const struct of_device_id samsung_pinctrl_dt_match[] = {
 		.data = (void *)exynos4x12_pin_ctrl },
 	{ .compatible = "samsung,exynos5250-pinctrl",
 		.data = (void *)exynos5250_pin_ctrl },
+	{ .compatible = "samsung,exynos5420-pinctrl",
+		.data = (void *)exynos5420_pin_ctrl },
 #endif
 #ifdef CONFIG_PINCTRL_S3C64XX
 	{ .compatible = "samsung,s3c64xx-pinctrl",
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
index 79fcc2076c0..11bb75ba81a 100644
--- a/drivers/pinctrl/pinctrl-samsung.h
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -254,6 +254,7 @@ struct samsung_pmx_func {
 extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos4x12_pin_ctrl[];
 extern struct samsung_pin_ctrl exynos5250_pin_ctrl[];
+extern struct samsung_pin_ctrl exynos5420_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c64xx_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2412_pin_ctrl[];
 extern struct samsung_pin_ctrl s3c2416_pin_ctrl[];