summaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-10-01 18:46:13 -0700
commit8f446a7a069e0af0639385f67c78ee2279bca04c (patch)
tree580cf495616b36ca0af0826afa87c430cdc1e7cb /drivers/pinctrl
parent84be4ae2c038e2b03d650cbf2a7cfd9e8d6e9e51 (diff)
parent04ef037c926ddb31088c976538e29eada4fd1490 (diff)
Merge tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM soc driver specific changes from Olof Johansson: - A long-coming conversion of various platforms to a common LED infrastructure - AT91 is moved over to use the newer MCI driver for MMC - Pincontrol conversions for samsung platforms - DT bindings for gscaler on samsung - i2c driver fixes for tegra, acked by i2c maintainer Fix up conflicts as per Olof. * tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits) drivers: bus: omap_l3: use resources instead of hardcoded irqs pinctrl: exynos: Fix wakeup IRQ domain registration check pinctrl: samsung: Uninline samsung_pinctrl_get_soc_data pinctrl: exynos: Correct the detection of wakeup-eint node pinctrl: exynos: Mark exynos_irq_demux_eint as inline pinctrl: exynos: Handle only unmasked wakeup interrupts pinctrl: exynos: Fix typos in gpio/wkup _irq_mask pinctrl: exynos: Set pin function to EINT in irq_set_type of GPIO EINTa drivers: bus: Move the OMAP interconnect driver to drivers/bus/ i2c: tegra: dynamically control fast clk i2c: tegra: I2_M_NOSTART functionality not supported in Tegra20 ARM: tegra: clock: remove unused clock entry for i2c ARM: tegra: clock: add connection name in i2c clock entry i2c: tegra: pass proper name for getting clock ARM: tegra: clock: add i2c fast clock entry in clock table ARM: EXYNOS: Adds G-Scaler device from Device Tree ARM: EXYNOS: Add clock support for G-Scaler ARM: EXYNOS: Enable pinctrl driver support for EXYNOS4 device tree enabled platform ARM: dts: Add pinctrl node entries for SAMSUNG EXYNOS4210 SoC ARM: EXYNOS: skip wakeup interrupt setup if pinctrl driver is used ...
Diffstat (limited to 'drivers/pinctrl')
-rw-r--r--drivers/pinctrl/Kconfig9
-rw-r--r--drivers/pinctrl/Makefile2
-rw-r--r--drivers/pinctrl/pinctrl-exynos.c579
-rw-r--r--drivers/pinctrl/pinctrl-exynos.h218
-rw-r--r--drivers/pinctrl/pinctrl-samsung.c888
-rw-r--r--drivers/pinctrl/pinctrl-samsung.h239
6 files changed, 1935 insertions, 0 deletions
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 54e3588bef6..34e94c7f68c 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -145,6 +145,15 @@ config PINCTRL_COH901
COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
ports of 8 GPIO pins each.
+config PINCTRL_SAMSUNG
+ bool "Samsung pinctrl driver"
+ select PINMUX
+ select PINCONF
+
+config PINCTRL_EXYNOS4
+ bool "Pinctrl driver data for Exynos4 SoC"
+ select PINCTRL_SAMSUNG
+
source "drivers/pinctrl/spear/Kconfig"
endmenu
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index f40b1f81ff2..6a88113e11d 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -29,5 +29,7 @@ obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o
obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o
obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o
obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o
+obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o
+obj-$(CONFIG_PINCTRL_EXYNOS4) += pinctrl-exynos.o
obj-$(CONFIG_PLAT_SPEAR) += spear/
diff --git a/drivers/pinctrl/pinctrl-exynos.c b/drivers/pinctrl/pinctrl-exynos.c
new file mode 100644
index 00000000000..21362f48d37
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.c
@@ -0,0 +1,579 @@
+/*
+ * Exynos specific support for Samsung pinctrl/gpiolib driver with eint support.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This file contains the Samsung Exynos specific information required by the
+ * the Samsung pinctrl/gpiolib driver. It also includes the implementation of
+ * external gpio and wakeup interrupt support.
+ */
+
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+
+#include <asm/mach/irq.h>
+
+#include "pinctrl-samsung.h"
+#include "pinctrl-exynos.h"
+
+/* list of external wakeup controllers supported */
+static const struct of_device_id exynos_wkup_irq_ids[] = {
+ { .compatible = "samsung,exynos4210-wakeup-eint", },
+};
+
+static void exynos_gpio_irq_unmask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask &= ~(1 << edata->pin);
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_mask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_mask = d->ctrl->geint_mask + edata->eint_offset;
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask |= 1 << edata->pin;
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_gpio_irq_ack(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ unsigned long reg_pend = d->ctrl->geint_pend + edata->eint_offset;
+
+ writel(1 << edata->pin, d->virt_base + reg_pend);
+}
+
+static int exynos_gpio_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct samsung_pinctrl_drv_data *d = irqd->domain->host_data;
+ struct samsung_pin_ctrl *ctrl = d->ctrl;
+ struct exynos_geint_data *edata = irq_data_get_irq_handler_data(irqd);
+ struct samsung_pin_bank *bank = edata->bank;
+ unsigned int shift = EXYNOS_EINT_CON_LEN * edata->pin;
+ unsigned int con, trig_type;
+ unsigned long reg_con = ctrl->geint_con + edata->eint_offset;
+ unsigned int mask;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ trig_type = EXYNOS_EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trig_type = EXYNOS_EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trig_type = EXYNOS_EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trig_type = EXYNOS_EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trig_type = EXYNOS_EINT_LEVEL_LOW;
+ break;
+ default:
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ __irq_set_handler_locked(irqd->irq, handle_edge_irq);
+ else
+ __irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(EXYNOS_EINT_CON_MASK << shift);
+ con |= trig_type << shift;
+ writel(con, d->virt_base + reg_con);
+
+ reg_con = bank->pctl_offset;
+ shift = edata->pin * bank->func_width;
+ mask = (1 << bank->func_width) - 1;
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(mask << shift);
+ con |= EXYNOS_EINT_FUNC << shift;
+ writel(con, d->virt_base + reg_con);
+
+ return 0;
+}
+
+/*
+ * irq_chip for gpio interrupts.
+ */
+static struct irq_chip exynos_gpio_irq_chip = {
+ .name = "exynos_gpio_irq_chip",
+ .irq_unmask = exynos_gpio_irq_unmask,
+ .irq_mask = exynos_gpio_irq_mask,
+ .irq_ack = exynos_gpio_irq_ack,
+ .irq_set_type = exynos_gpio_irq_set_type,
+};
+
+/*
+ * given a controller-local external gpio interrupt number, prepare the handler
+ * data for it.
+ */
+static struct exynos_geint_data *exynos_get_eint_data(irq_hw_number_t hw,
+ struct samsung_pinctrl_drv_data *d)
+{
+ struct samsung_pin_bank *bank = d->ctrl->pin_banks;
+ struct exynos_geint_data *eint_data;
+ unsigned int nr_banks = d->ctrl->nr_banks, idx;
+ unsigned int irq_base = 0, eint_offset = 0;
+
+ if (hw >= d->ctrl->nr_gint) {
+ dev_err(d->dev, "unsupported ext-gpio interrupt\n");
+ return NULL;
+ }
+
+ for (idx = 0; idx < nr_banks; idx++, bank++) {
+ if (bank->eint_type != EINT_TYPE_GPIO)
+ continue;
+ if ((hw >= irq_base) && (hw < (irq_base + bank->nr_pins)))
+ break;
+ irq_base += bank->nr_pins;
+ eint_offset += 4;
+ }
+
+ if (idx == nr_banks) {
+ dev_err(d->dev, "pin bank not found for ext-gpio interrupt\n");
+ return NULL;
+ }
+
+ eint_data = devm_kzalloc(d->dev, sizeof(*eint_data), GFP_KERNEL);
+ if (!eint_data) {
+ dev_err(d->dev, "no memory for eint-gpio data\n");
+ return NULL;
+ }
+
+ eint_data->bank = bank;
+ eint_data->pin = hw - irq_base;
+ eint_data->eint_offset = eint_offset;
+ return eint_data;
+}
+
+static int exynos_gpio_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ struct samsung_pinctrl_drv_data *d = h->host_data;
+ struct exynos_geint_data *eint_data;
+
+ eint_data = exynos_get_eint_data(hw, d);
+ if (!eint_data)
+ return -EINVAL;
+
+ irq_set_handler_data(virq, eint_data);
+ irq_set_chip_data(virq, h->host_data);
+ irq_set_chip_and_handler(virq, &exynos_gpio_irq_chip,
+ handle_level_irq);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+static void exynos_gpio_irq_unmap(struct irq_domain *h, unsigned int virq)
+{
+ struct samsung_pinctrl_drv_data *d = h->host_data;
+ struct exynos_geint_data *eint_data;
+
+ eint_data = irq_get_handler_data(virq);
+ devm_kfree(d->dev, eint_data);
+}
+
+/*
+ * irq domain callbacks for external gpio interrupt controller.
+ */
+static const struct irq_domain_ops exynos_gpio_irqd_ops = {
+ .map = exynos_gpio_irq_map,
+ .unmap = exynos_gpio_irq_unmap,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+static irqreturn_t exynos_eint_gpio_irq(int irq, void *data)
+{
+ struct samsung_pinctrl_drv_data *d = data;
+ struct samsung_pin_ctrl *ctrl = d->ctrl;
+ struct samsung_pin_bank *bank = ctrl->pin_banks;
+ unsigned int svc, group, pin, virq;
+
+ svc = readl(d->virt_base + ctrl->svc);
+ group = EXYNOS_SVC_GROUP(svc);
+ pin = svc & EXYNOS_SVC_NUM_MASK;
+
+ if (!group)
+ return IRQ_HANDLED;
+ bank += (group - 1);
+
+ virq = irq_linear_revmap(d->gpio_irqd, bank->irq_base + pin);
+ if (!virq)
+ return IRQ_NONE;
+ generic_handle_irq(virq);
+ return IRQ_HANDLED;
+}
+
+/*
+ * exynos_eint_gpio_init() - setup handling of external gpio interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_gpio_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ unsigned int ret;
+
+ if (!d->irq) {
+ dev_err(dev, "irq number not available\n");
+ return -EINVAL;
+ }
+
+ ret = devm_request_irq(dev, d->irq, exynos_eint_gpio_irq,
+ 0, dev_name(dev), d);
+ if (ret) {
+ dev_err(dev, "irq request failed\n");
+ return -ENXIO;
+ }
+
+ d->gpio_irqd = irq_domain_add_linear(dev->of_node, d->ctrl->nr_gint,
+ &exynos_gpio_irqd_ops, d);
+ if (!d->gpio_irqd) {
+ dev_err(dev, "gpio irq domain allocation failed\n");
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void exynos_wkup_irq_unmask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask &= ~(1 << pin);
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_mask(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_mask = d->ctrl->weint_mask + (bank << 2);
+ unsigned long mask;
+
+ mask = readl(d->virt_base + reg_mask);
+ mask |= 1 << pin;
+ writel(mask, d->virt_base + reg_mask);
+}
+
+static void exynos_wkup_irq_ack(struct irq_data *irqd)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long pend = d->ctrl->weint_pend + (bank << 2);
+
+ writel(1 << pin, d->virt_base + pend);
+}
+
+static int exynos_wkup_irq_set_type(struct irq_data *irqd, unsigned int type)
+{
+ struct samsung_pinctrl_drv_data *d = irq_data_get_irq_chip_data(irqd);
+ unsigned int bank = irqd->hwirq / EXYNOS_EINT_MAX_PER_BANK;
+ unsigned int pin = irqd->hwirq & (EXYNOS_EINT_MAX_PER_BANK - 1);
+ unsigned long reg_con = d->ctrl->weint_con + (bank << 2);
+ unsigned long shift = EXYNOS_EINT_CON_LEN * pin;
+ unsigned long con, trig_type;
+
+ switch (type) {
+ case IRQ_TYPE_EDGE_RISING:
+ trig_type = EXYNOS_EINT_EDGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ trig_type = EXYNOS_EINT_EDGE_FALLING;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ trig_type = EXYNOS_EINT_EDGE_BOTH;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ trig_type = EXYNOS_EINT_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ trig_type = EXYNOS_EINT_LEVEL_LOW;
+ break;
+ default:
+ pr_err("unsupported external interrupt type\n");
+ return -EINVAL;
+ }
+
+ if (type & IRQ_TYPE_EDGE_BOTH)
+ __irq_set_handler_locked(irqd->irq, handle_edge_irq);
+ else
+ __irq_set_handler_locked(irqd->irq, handle_level_irq);
+
+ con = readl(d->virt_base + reg_con);
+ con &= ~(EXYNOS_EINT_CON_MASK << shift);
+ con |= trig_type << shift;
+ writel(con, d->virt_base + reg_con);
+ return 0;
+}
+
+/*
+ * irq_chip for wakeup interrupts
+ */
+static struct irq_chip exynos_wkup_irq_chip = {
+ .name = "exynos_wkup_irq_chip",
+ .irq_unmask = exynos_wkup_irq_unmask,
+ .irq_mask = exynos_wkup_irq_mask,
+ .irq_ack = exynos_wkup_irq_ack,
+ .irq_set_type = exynos_wkup_irq_set_type,
+};
+
+/* interrupt handler for wakeup interrupts 0..15 */
+static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
+{
+ struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+ struct irq_chip *chip = irq_get_chip(irq);
+ int eint_irq;
+
+ chained_irq_enter(chip, desc);
+ chip->irq_mask(&desc->irq_data);
+
+ if (chip->irq_ack)
+ chip->irq_ack(&desc->irq_data);
+
+ eint_irq = irq_linear_revmap(eintd->domain, eintd->irq);
+ generic_handle_irq(eint_irq);
+ chip->irq_unmask(&desc->irq_data);
+ chained_irq_exit(chip, desc);
+}
+
+static inline void exynos_irq_demux_eint(int irq_base, unsigned long pend,
+ struct irq_domain *domain)
+{
+ unsigned int irq;
+
+ while (pend) {
+ irq = fls(pend) - 1;
+ generic_handle_irq(irq_find_mapping(domain, irq_base + irq));
+ pend &= ~(1 << irq);
+ }
+}
+
+/* interrupt handler for wakeup interrupt 16 */
+static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_get_chip(irq);
+ struct exynos_weint_data *eintd = irq_get_handler_data(irq);
+ struct samsung_pinctrl_drv_data *d = eintd->domain->host_data;
+ unsigned long pend;
+ unsigned long mask;
+
+ chained_irq_enter(chip, desc);
+ pend = readl(d->virt_base + d->ctrl->weint_pend + 0x8);
+ mask = readl(d->virt_base + d->ctrl->weint_mask + 0x8);
+ exynos_irq_demux_eint(16, pend & ~mask, eintd->domain);
+ pend = readl(d->virt_base + d->ctrl->weint_pend + 0xC);
+ mask = readl(d->virt_base + d->ctrl->weint_mask + 0xC);
+ exynos_irq_demux_eint(24, pend & ~mask, eintd->domain);
+ chained_irq_exit(chip, desc);
+}
+
+static int exynos_wkup_irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &exynos_wkup_irq_chip, handle_level_irq);
+ irq_set_chip_data(virq, h->host_data);
+ set_irq_flags(virq, IRQF_VALID);
+ return 0;
+}
+
+/*
+ * irq domain callbacks for external wakeup interrupt controller.
+ */
+static const struct irq_domain_ops exynos_wkup_irqd_ops = {
+ .map = exynos_wkup_irq_map,
+ .xlate = irq_domain_xlate_twocell,
+};
+
+/*
+ * exynos_eint_wkup_init() - setup handling of external wakeup interrupts.
+ * @d: driver data of samsung pinctrl driver.
+ */
+static int exynos_eint_wkup_init(struct samsung_pinctrl_drv_data *d)
+{
+ struct device *dev = d->dev;
+ struct device_node *wkup_np = NULL;
+ struct device_node *np;
+ struct exynos_weint_data *weint_data;
+ int idx, irq;
+
+ for_each_child_of_node(dev->of_node, np) {
+ if (of_match_node(exynos_wkup_irq_ids, np)) {
+ wkup_np = np;
+ break;
+ }
+ }
+ if (!wkup_np)
+ return -ENODEV;
+
+ d->wkup_irqd = irq_domain_add_linear(wkup_np, d->ctrl->nr_wint,
+ &exynos_wkup_irqd_ops, d);
+ if (!d->wkup_irqd) {
+ dev_err(dev, "wakeup irq domain allocation failed\n");
+ return -ENXIO;
+ }
+
+ weint_data = devm_kzalloc(dev, sizeof(*weint_data) * 17, GFP_KERNEL);
+ if (!weint_data) {
+ dev_err(dev, "could not allocate memory for weint_data\n");
+ return -ENOMEM;
+ }
+
+ irq = irq_of_parse_and_map(wkup_np, 16);
+ if (irq) {
+ weint_data[16].domain = d->wkup_irqd;
+ irq_set_chained_handler(irq, exynos_irq_demux_eint16_31);
+ irq_set_handler_data(irq, &weint_data[16]);
+ } else {
+ dev_err(dev, "irq number for EINT16-32 not found\n");
+ }
+
+ for (idx = 0; idx < 16; idx++) {
+ weint_data[idx].domain = d->wkup_irqd;
+ weint_data[idx].irq = idx;
+
+ irq = irq_of_parse_and_map(wkup_np, idx);
+ if (irq) {
+ irq_set_handler_data(irq, &weint_data[idx]);
+ irq_set_chained_handler(irq, exynos_irq_eint0_15);
+ } else {
+ dev_err(dev, "irq number for eint-%x not found\n", idx);
+ }
+ }
+ return 0;
+}
+
+/* pin banks of exynos4210 pin-controller 0 */
+static struct samsung_pin_bank exynos4210_pin_banks0[] = {
+ EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_A0, "gpa0"),
+ EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_A1, "gpa1"),
+ EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_B, "gpb"),
+ EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_C0, "gpc0"),
+ EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_C1, "gpc1"),
+ EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_D0, "gpd0"),
+ EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_D1, "gpd1"),
+ EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_E0, "gpe0"),
+ EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_E1, "gpe1"),
+ EXYNOS_PIN_BANK_EINTG(0x120, EXYNOS4210_GPIO_E2, "gpe2"),
+ EXYNOS_PIN_BANK_EINTG(0x140, EXYNOS4210_GPIO_E3, "gpe3"),
+ EXYNOS_PIN_BANK_EINTG(0x160, EXYNOS4210_GPIO_E4, "gpe4"),
+ EXYNOS_PIN_BANK_EINTG(0x180, EXYNOS4210_GPIO_F0, "gpf0"),
+ EXYNOS_PIN_BANK_EINTG(0x1A0, EXYNOS4210_GPIO_F1, "gpf1"),
+ EXYNOS_PIN_BANK_EINTG(0x1C0, EXYNOS4210_GPIO_F2, "gpf2"),
+ EXYNOS_PIN_BANK_EINTG(0x1E0, EXYNOS4210_GPIO_F3, "gpf3"),
+};
+
+/* pin banks of exynos4210 pin-controller 1 */
+static struct samsung_pin_bank exynos4210_pin_banks1[] = {
+ EXYNOS_PIN_BANK_EINTG(0x000, EXYNOS4210_GPIO_J0, "gpj0"),
+ EXYNOS_PIN_BANK_EINTG(0x020, EXYNOS4210_GPIO_J1, "gpj1"),
+ EXYNOS_PIN_BANK_EINTG(0x040, EXYNOS4210_GPIO_K0, "gpk0"),
+ EXYNOS_PIN_BANK_EINTG(0x060, EXYNOS4210_GPIO_K1, "gpk1"),
+ EXYNOS_PIN_BANK_EINTG(0x080, EXYNOS4210_GPIO_K2, "gpk2"),
+ EXYNOS_PIN_BANK_EINTG(0x0A0, EXYNOS4210_GPIO_K3, "gpk3"),
+ EXYNOS_PIN_BANK_EINTG(0x0C0, EXYNOS4210_GPIO_L0, "gpl0"),
+ EXYNOS_PIN_BANK_EINTG(0x0E0, EXYNOS4210_GPIO_L1, "gpl1"),
+ EXYNOS_PIN_BANK_EINTG(0x100, EXYNOS4210_GPIO_L2, "gpl2"),
+ EXYNOS_PIN_BANK_EINTN(0x120, EXYNOS4210_GPIO_Y0, "gpy0"),
+ EXYNOS_PIN_BANK_EINTN(0x140, EXYNOS4210_GPIO_Y1, "gpy1"),
+ EXYNOS_PIN_BANK_EINTN(0x160, EXYNOS4210_GPIO_Y2, "gpy2"),
+ EXYNOS_PIN_BANK_EINTN(0x180, EXYNOS4210_GPIO_Y3, "gpy3"),
+ EXYNOS_PIN_BANK_EINTN(0x1A0, EXYNOS4210_GPIO_Y4, "gpy4"),
+ EXYNOS_PIN_BANK_EINTN(0x1C0, EXYNOS4210_GPIO_Y5, "gpy5"),
+ EXYNOS_PIN_BANK_EINTN(0x1E0, EXYNOS4210_GPIO_Y6, "gpy6"),
+ EXYNOS_PIN_BANK_EINTN(0xC00, EXYNOS4210_GPIO_X0, "gpx0"),
+ EXYNOS_PIN_BANK_EINTN(0xC20, EXYNOS4210_GPIO_X1, "gpx1"),
+ EXYNOS_PIN_BANK_EINTN(0xC40, EXYNOS4210_GPIO_X2, "gpx2"),
+ EXYNOS_PIN_BANK_EINTN(0xC60, EXYNOS4210_GPIO_X3, "gpx3"),
+};
+
+/* pin banks of exynos4210 pin-controller 2 */
+static struct samsung_pin_bank exynos4210_pin_banks2[] = {
+ EXYNOS_PIN_BANK_EINTN(0x000, EXYNOS4210_GPIO_Z, "gpz"),
+};
+
+/*
+ * Samsung pinctrl driver data for Exynos4210 SoC. Exynos4210 SoC includes
+ * three gpio/pin-mux/pinconfig controllers.
+ */
+struct samsung_pin_ctrl exynos4210_pin_ctrl[] = {
+ {
+ /* pin-controller instance 0 data */
+ .pin_banks = exynos4210_pin_banks0,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks0),
+ .base = EXYNOS4210_GPIO_A0_START,
+ .nr_pins = EXYNOS4210_GPIOA_NR_PINS,
+ .nr_gint = EXYNOS4210_GPIOA_NR_GINT,
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .label = "exynos4210-gpio-ctrl0",
+ }, {
+ /* pin-controller instance 1 data */
+ .pin_banks = exynos4210_pin_banks1,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks1),
+ .base = EXYNOS4210_GPIOA_NR_PINS,
+ .nr_pins = EXYNOS4210_GPIOB_NR_PINS,
+ .nr_gint = EXYNOS4210_GPIOB_NR_GINT,
+ .nr_wint = 32,
+ .geint_con = EXYNOS_GPIO_ECON_OFFSET,
+ .geint_mask = EXYNOS_GPIO_EMASK_OFFSET,
+ .geint_pend = EXYNOS_GPIO_EPEND_OFFSET,
+ .weint_con = EXYNOS_WKUP_ECON_OFFSET,
+ .weint_mask = EXYNOS_WKUP_EMASK_OFFSET,
+ .weint_pend = EXYNOS_WKUP_EPEND_OFFSET,
+ .svc = EXYNOS_SVC_OFFSET,
+ .eint_gpio_init = exynos_eint_gpio_init,
+ .eint_wkup_init = exynos_eint_wkup_init,
+ .label = "exynos4210-gpio-ctrl1",
+ }, {
+ /* pin-controller instance 2 data */
+ .pin_banks = exynos4210_pin_banks2,
+ .nr_banks = ARRAY_SIZE(exynos4210_pin_banks2),
+ .base = EXYNOS4210_GPIOA_NR_PINS +
+ EXYNOS4210_GPIOB_NR_PINS,
+ .nr_pins = EXYNOS4210_GPIOC_NR_PINS,
+ .label = "exynos4210-gpio-ctrl2",
+ },
+};
diff --git a/drivers/pinctrl/pinctrl-exynos.h b/drivers/pinctrl/pinctrl-exynos.h
new file mode 100644
index 00000000000..31d0a06174e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-exynos.h
@@ -0,0 +1,218 @@
+/*
+ * Exynos specific definitions for Samsung pinctrl and gpiolib driver.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * This file contains the Exynos specific definitions for the Samsung
+ * pinctrl/gpiolib interface drivers.
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#define EXYNOS_GPIO_START(__gpio) ((__gpio##_START) + (__gpio##_NR))
+
+#define EXYNOS4210_GPIO_A0_NR (8)
+#define EXYNOS4210_GPIO_A1_NR (6)
+#define EXYNOS4210_GPIO_B_NR (8)
+#define EXYNOS4210_GPIO_C0_NR (5)
+#define EXYNOS4210_GPIO_C1_NR (5)
+#define EXYNOS4210_GPIO_D0_NR (4)
+#define EXYNOS4210_GPIO_D1_NR (4)
+#define EXYNOS4210_GPIO_E0_NR (5)
+#define EXYNOS4210_GPIO_E1_NR (8)
+#define EXYNOS4210_GPIO_E2_NR (6)
+#define EXYNOS4210_GPIO_E3_NR (8)
+#define EXYNOS4210_GPIO_E4_NR (8)
+#define EXYNOS4210_GPIO_F0_NR (8)
+#define EXYNOS4210_GPIO_F1_NR (8)
+#define EXYNOS4210_GPIO_F2_NR (8)
+#define EXYNOS4210_GPIO_F3_NR (6)
+#define EXYNOS4210_GPIO_J0_NR (8)
+#define EXYNOS4210_GPIO_J1_NR (5)
+#define EXYNOS4210_GPIO_K0_NR (7)
+#define EXYNOS4210_GPIO_K1_NR (7)
+#define EXYNOS4210_GPIO_K2_NR (7)
+#define EXYNOS4210_GPIO_K3_NR (7)
+#define EXYNOS4210_GPIO_L0_NR (8)
+#define EXYNOS4210_GPIO_L1_NR (3)
+#define EXYNOS4210_GPIO_L2_NR (8)
+#define EXYNOS4210_GPIO_Y0_NR (6)
+#define EXYNOS4210_GPIO_Y1_NR (4)
+#define EXYNOS4210_GPIO_Y2_NR (6)
+#define EXYNOS4210_GPIO_Y3_NR (8)
+#define EXYNOS4210_GPIO_Y4_NR (8)
+#define EXYNOS4210_GPIO_Y5_NR (8)
+#define EXYNOS4210_GPIO_Y6_NR (8)
+#define EXYNOS4210_GPIO_X0_NR (8)
+#define EXYNOS4210_GPIO_X1_NR (8)
+#define EXYNOS4210_GPIO_X2_NR (8)
+#define EXYNOS4210_GPIO_X3_NR (8)
+#define EXYNOS4210_GPIO_Z_NR (7)
+
+enum exynos4210_gpio_xa_start {
+ EXYNOS4210_GPIO_A0_START = 0,
+ EXYNOS4210_GPIO_A1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A0),
+ EXYNOS4210_GPIO_B_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_A1),
+ EXYNOS4210_GPIO_C0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_B),
+ EXYNOS4210_GPIO_C1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C0),
+ EXYNOS4210_GPIO_D0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_C1),
+ EXYNOS4210_GPIO_D1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D0),
+ EXYNOS4210_GPIO_E0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_D1),
+ EXYNOS4210_GPIO_E1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E0),
+ EXYNOS4210_GPIO_E2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E1),
+ EXYNOS4210_GPIO_E3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E2),
+ EXYNOS4210_GPIO_E4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E3),
+ EXYNOS4210_GPIO_F0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_E4),
+ EXYNOS4210_GPIO_F1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F0),
+ EXYNOS4210_GPIO_F2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F1),
+ EXYNOS4210_GPIO_F3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_F2),
+};
+
+enum exynos4210_gpio_xb_start {
+ EXYNOS4210_GPIO_J0_START = 0,
+ EXYNOS4210_GPIO_J1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J0),
+ EXYNOS4210_GPIO_K0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_J1),
+ EXYNOS4210_GPIO_K1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K0),
+ EXYNOS4210_GPIO_K2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K1),
+ EXYNOS4210_GPIO_K3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K2),
+ EXYNOS4210_GPIO_L0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_K3),
+ EXYNOS4210_GPIO_L1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L0),
+ EXYNOS4210_GPIO_L2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L1),
+ EXYNOS4210_GPIO_Y0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2),
+ EXYNOS4210_GPIO_Y1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y0),
+ EXYNOS4210_GPIO_Y2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y1),
+ EXYNOS4210_GPIO_Y3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y2),
+ EXYNOS4210_GPIO_Y4_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y3),
+ EXYNOS4210_GPIO_Y5_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y4),
+ EXYNOS4210_GPIO_Y6_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y5),
+ EXYNOS4210_GPIO_X0_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_Y6),
+ EXYNOS4210_GPIO_X1_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X0),
+ EXYNOS4210_GPIO_X2_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X1),
+ EXYNOS4210_GPIO_X3_START = EXYNOS_GPIO_START(EXYNOS4210_GPIO_X2),
+};
+
+enum exynos4210_gpio_xc_start {
+ EXYNOS4210_GPIO_Z_START = 0,
+};
+
+#define EXYNOS4210_GPIO_A0_IRQ EXYNOS4210_GPIO_A0_START
+#define EXYNOS4210_GPIO_A1_IRQ EXYNOS4210_GPIO_A1_START
+#define EXYNOS4210_GPIO_B_IRQ EXYNOS4210_GPIO_B_START
+#define EXYNOS4210_GPIO_C0_IRQ EXYNOS4210_GPIO_C0_START
+#define EXYNOS4210_GPIO_C1_IRQ EXYNOS4210_GPIO_C1_START
+#define EXYNOS4210_GPIO_D0_IRQ EXYNOS4210_GPIO_D0_START
+#define EXYNOS4210_GPIO_D1_IRQ EXYNOS4210_GPIO_D1_START
+#define EXYNOS4210_GPIO_E0_IRQ EXYNOS4210_GPIO_E0_START
+#define EXYNOS4210_GPIO_E1_IRQ EXYNOS4210_GPIO_E1_START
+#define EXYNOS4210_GPIO_E2_IRQ EXYNOS4210_GPIO_E2_START
+#define EXYNOS4210_GPIO_E3_IRQ EXYNOS4210_GPIO_E3_START
+#define EXYNOS4210_GPIO_E4_IRQ EXYNOS4210_GPIO_E4_START
+#define EXYNOS4210_GPIO_F0_IRQ EXYNOS4210_GPIO_F0_START
+#define EXYNOS4210_GPIO_F1_IRQ EXYNOS4210_GPIO_F1_START
+#define EXYNOS4210_GPIO_F2_IRQ EXYNOS4210_GPIO_F2_START
+#define EXYNOS4210_GPIO_F3_IRQ EXYNOS4210_GPIO_F3_START
+#define EXYNOS4210_GPIO_J0_IRQ EXYNOS4210_GPIO_J0_START
+#define EXYNOS4210_GPIO_J1_IRQ EXYNOS4210_GPIO_J1_START
+#define EXYNOS4210_GPIO_K0_IRQ EXYNOS4210_GPIO_K0_START
+#define EXYNOS4210_GPIO_K1_IRQ EXYNOS4210_GPIO_K1_START
+#define EXYNOS4210_GPIO_K2_IRQ EXYNOS4210_GPIO_K2_START
+#define EXYNOS4210_GPIO_K3_IRQ EXYNOS4210_GPIO_K3_START
+#define EXYNOS4210_GPIO_L0_IRQ EXYNOS4210_GPIO_L0_START
+#define EXYNOS4210_GPIO_L1_IRQ EXYNOS4210_GPIO_L1_START
+#define EXYNOS4210_GPIO_L2_IRQ EXYNOS4210_GPIO_L2_START
+#define EXYNOS4210_GPIO_Z_IRQ EXYNOS4210_GPIO_Z_START
+
+#define EXYNOS4210_GPIOA_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOA_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_F3)
+#define EXYNOS4210_GPIOB_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_X3)
+#define EXYNOS4210_GPIOB_NR_GINT EXYNOS_GPIO_START(EXYNOS4210_GPIO_L2)
+#define EXYNOS4210_GPIOC_NR_PINS EXYNOS_GPIO_START(EXYNOS4210_GPIO_Z)
+
+/* External GPIO and wakeup interrupt related definitions */
+#define EXYNOS_GPIO_ECON_OFFSET 0x700
+#define EXYNOS_GPIO_EMASK_OFFSET 0x900
+#define EXYNOS_GPIO_EPEND_OFFSET 0xA00
+#define EXYNOS_WKUP_ECON_OFFSET 0xE00
+#define EXYNOS_WKUP_EMASK_OFFSET 0xF00
+#define EXYNOS_WKUP_EPEND_OFFSET 0xF40
+#define EXYNOS_SVC_OFFSET 0xB08
+#define EXYNOS_EINT_FUNC 0xF
+
+/* helpers to access interrupt service register */
+#define EXYNOS_SVC_GROUP_SHIFT 3
+#define EXYNOS_SVC_GROUP_MASK 0x1f
+#define EXYNOS_SVC_NUM_MASK 7
+#define EXYNOS_SVC_GROUP(x) ((x >> EXYNOS_SVC_GROUP_SHIFT) & \
+ EXYNOS_SVC_GROUP_MASK)
+
+/* Exynos specific external interrupt trigger types */
+#define EXYNOS_EINT_LEVEL_LOW 0
+#define EXYNOS_EINT_LEVEL_HIGH 1
+#define EXYNOS_EINT_EDGE_FALLING 2
+#define EXYNOS_EINT_EDGE_RISING 3
+#define EXYNOS_EINT_EDGE_BOTH 4
+#define EXYNOS_EINT_CON_MASK 0xF
+#define EXYNOS_EINT_CON_LEN 4
+
+#define EXYNOS_EINT_MAX_PER_BANK 8
+#define EXYNOS_EINT_NR_WKUP_EINT
+
+#define EXYNOS_PIN_BANK_EINTN(reg, __gpio, id) \
+ { \
+ .pctl_offset = reg, \
+ .pin_base = (__gpio##_START), \
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .conpdn_width = 2, \
+ .pudpdn_width = 2, \
+ .eint_type = EINT_TYPE_NONE, \
+ .name = id \
+ }
+
+#define EXYNOS_PIN_BANK_EINTG(reg, __gpio, id) \
+ { \
+ .pctl_offset = reg, \
+ .pin_base = (__gpio##_START), \
+ .nr_pins = (__gpio##_NR), \
+ .func_width = 4, \
+ .pud_width = 2, \
+ .drv_width = 2, \
+ .conpdn_width = 2, \
+ .pudpdn_width = 2, \
+ .eint_type = EINT_TYPE_GPIO, \
+ .irq_base = (__gpio##_IRQ), \
+ .name = id \
+ }
+
+/**
+ * struct exynos_geint_data: gpio eint specific data for irq_chip callbacks.
+ * @bank: pin bank from which this gpio interrupt originates.
+ * @pin: pin number within the bank.
+ * @eint_offset: offset to be added to the con/pend/mask register bank base.
+ */
+struct exynos_geint_data {
+ struct samsung_pin_bank *bank;
+ u32 pin;
+ u32 eint_offset;
+};
+
+/**
+ * struct exynos_weint_data: irq specific data for all the wakeup interrupts
+ * generated by the external wakeup interrupt controller.
+ * @domain: irq domain representing the external wakeup interrupts
+ * @irq: interrupt number within the domain.
+ */
+struct exynos_weint_data {
+ struct irq_domain *domain;
+ u32 irq;
+};
diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c
new file mode 100644
index 00000000000..dd108a94acf
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.c
@@ -0,0 +1,888 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This driver implements the Samsung pinctrl driver. It supports setting up of
+ * pinmux and pinconf configurations. The gpiolib interface is also included.
+ * External interrupt (gpio and wakeup) support are not included in this driver
+ * but provides extensions to which platform specific implementation of the gpio
+ * and wakeup interrupts can be hooked to.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+
+#include "core.h"
+#include "pinctrl-samsung.h"
+
+#define GROUP_SUFFIX "-grp"
+#define GSUFFIX_LEN sizeof(GROUP_SUFFIX)
+#define FUNCTION_SUFFIX "-mux"
+#define FSUFFIX_LEN sizeof(FUNCTION_SUFFIX)
+
+/* list of all possible config options supported */
+struct pin_config {
+ char *prop_cfg;
+ unsigned int cfg_type;
+} pcfgs[] = {
+ { "samsung,pin-pud", PINCFG_TYPE_PUD },
+ { "samsung,pin-drv", PINCFG_TYPE_DRV },
+ { "samsung,pin-con-pdn", PINCFG_TYPE_CON_PDN },
+ { "samsung,pin-pud-pdn", PINCFG_TYPE_PUD_PDN },
+};
+
+/* check if the selector is a valid pin group selector */
+static int samsung_get_group_count(struct pinctrl_dev *pctldev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->nr_groups;
+}
+
+/* return the name of the group selected by the group selector */
+static const char *samsung_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->pin_groups[selector].name;
+}
+
+/* return the pin numbers associated with the specified group */
+static int samsung_get_group_pins(struct pinctrl_dev *pctldev,
+ unsigned selector, const unsigned **pins, unsigned *num_pins)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ *pins = drvdata->pin_groups[selector].pins;
+ *num_pins = drvdata->pin_groups[selector].num_pins;
+ return 0;
+}
+
+/* create pinctrl_map entries by parsing device tree nodes */
+static int samsung_dt_node_to_map(struct pinctrl_dev *pctldev,
+ struct device_node *np, struct pinctrl_map **maps,
+ unsigned *nmaps)
+{
+ struct device *dev = pctldev->dev;
+ struct pinctrl_map *map;
+ unsigned long *cfg = NULL;
+ char *gname, *fname;
+ int cfg_cnt = 0, map_cnt = 0, idx = 0;
+
+ /* count the number of config options specfied in the node */
+ for (idx = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+ if (of_find_property(np, pcfgs[idx].prop_cfg, NULL))
+ cfg_cnt++;
+ }
+
+ /*
+ * Find out the number of map entries to create. All the config options
+ * can be accomadated into a single config map entry.
+ */
+ if (cfg_cnt)
+ map_cnt = 1;
+ if (of_find_property(np, "samsung,pin-function", NULL))
+ map_cnt++;
+ if (!map_cnt) {
+ dev_err(dev, "node %s does not have either config or function "
+ "configurations\n", np->name);
+ return -EINVAL;
+ }
+
+ /* Allocate memory for pin-map entries */
+ map = kzalloc(sizeof(*map) * map_cnt, GFP_KERNEL);
+ if (!map) {
+ dev_err(dev, "could not alloc memory for pin-maps\n");
+ return -ENOMEM;
+ }
+ *nmaps = 0;
+
+ /*
+ * Allocate memory for pin group name. The pin group name is derived
+ * from the node name from which these map entries are be created.
+ */
+ gname = kzalloc(strlen(np->name) + GSUFFIX_LEN, GFP_KERNEL);
+ if (!gname) {
+ dev_err(dev, "failed to alloc memory for group name\n");
+ goto free_map;
+ }
+ sprintf(gname, "%s%s", np->name, GROUP_SUFFIX);
+
+ /*
+ * don't have config options? then skip over to creating function
+ * map entries.
+ */
+ if (!cfg_cnt)
+ goto skip_cfgs;
+
+ /* Allocate memory for config entries */
+ cfg = kzalloc(sizeof(*cfg) * cfg_cnt, GFP_KERNEL);
+ if (!cfg) {
+ dev_err(dev, "failed to alloc memory for configs\n");
+ goto free_gname;
+ }
+
+ /* Prepare a list of config settings */
+ for (idx = 0, cfg_cnt = 0; idx < ARRAY_SIZE(pcfgs); idx++) {
+ u32 value;
+ if (!of_property_read_u32(np, pcfgs[idx].prop_cfg, &value))
+ cfg[cfg_cnt++] =
+ PINCFG_PACK(pcfgs[idx].cfg_type, value);
+ }
+
+ /* create the config map entry */
+ map[*nmaps].data.configs.group_or_pin = gname;
+ map[*nmaps].data.configs.configs = cfg;
+ map[*nmaps].data.configs.num_configs = cfg_cnt;
+ map[*nmaps].type = PIN_MAP_TYPE_CONFIGS_GROUP;
+ *nmaps += 1;
+
+skip_cfgs:
+ /* create the function map entry */
+ if (of_find_property(np, "samsung,pin-function", NULL)) {
+ fname = kzalloc(strlen(np->name) + FSUFFIX_LEN, GFP_KERNEL);
+ if (!fname) {
+ dev_err(dev, "failed to alloc memory for func name\n");
+ goto free_cfg;
+ }
+ sprintf(fname, "%s%s", np->name, FUNCTION_SUFFIX);
+
+ map[*nmaps].data.mux.group = gname;
+ map[*nmaps].data.mux.function = fname;
+ map[*nmaps].type = PIN_MAP_TYPE_MUX_GROUP;
+ *nmaps += 1;
+ }
+
+ *maps = map;
+ return 0;
+
+free_cfg:
+ kfree(cfg);
+free_gname:
+ kfree(gname);
+free_map:
+ kfree(map);
+ return -ENOMEM;
+}
+
+/* free the memory allocated to hold the pin-map table */
+static void samsung_dt_free_map(struct pinctrl_dev *pctldev,
+ struct pinctrl_map *map, unsigned num_maps)
+{
+ int idx;
+
+ for (idx = 0; idx < num_maps; idx++) {
+ if (map[idx].type == PIN_MAP_TYPE_MUX_GROUP) {
+ kfree(map[idx].data.mux.function);
+ if (!idx)
+ kfree(map[idx].data.mux.group);
+ } else if (map->type == PIN_MAP_TYPE_CONFIGS_GROUP) {
+ kfree(map[idx].data.configs.configs);
+ if (!idx)
+ kfree(map[idx].data.configs.group_or_pin);
+ }
+ };
+
+ kfree(map);
+}
+
+/* list of pinctrl callbacks for the pinctrl core */
+static struct pinctrl_ops samsung_pctrl_ops = {
+ .get_groups_count = samsung_get_group_count,
+ .get_group_name = samsung_get_group_name,
+ .get_group_pins = samsung_get_group_pins,
+ .dt_node_to_map = samsung_dt_node_to_map,
+ .dt_free_map = samsung_dt_free_map,
+};
+
+/* check if the selector is a valid pin function selector */
+static int samsung_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->nr_functions;
+}
+
+/* return the name of the pin function specified */
+static const char *samsung_pinmux_get_fname(struct pinctrl_dev *pctldev,
+ unsigned selector)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ return drvdata->pmx_functions[selector].name;
+}
+
+/* return the groups associated for the specified function selector */
+static int samsung_pinmux_get_groups(struct pinctrl_dev *pctldev,
+ unsigned selector, const char * const **groups,
+ unsigned * const num_groups)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ *groups = drvdata->pmx_functions[selector].groups;
+ *num_groups = drvdata->pmx_functions[selector].num_groups;
+ return 0;
+}
+
+/*
+ * given a pin number that is local to a pin controller, find out the pin bank
+ * and the register base of the pin bank.
+ */
+static void pin_to_reg_bank(struct gpio_chip *gc, unsigned pin,
+ void __iomem **reg, u32 *offset,
+ struct samsung_pin_bank **bank)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct samsung_pin_bank *b;
+
+ drvdata = dev_get_drvdata(gc->dev);
+ b = drvdata->ctrl->pin_banks;
+
+ while ((pin >= b->pin_base) &&
+ ((b->pin_base + b->nr_pins - 1) < pin))
+ b++;
+
+ *reg = drvdata->virt_base + b->pctl_offset;
+ *offset = pin - b->pin_base;
+ if (bank)
+ *bank = b;
+
+ /* some banks have two config registers in a single bank */
+ if (*offset * b->func_width > BITS_PER_LONG)
+ *reg += 4;
+}
+
+/* enable or disable a pinmux function */
+static void samsung_pinmux_setup(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group, bool enable)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+ struct samsung_pin_bank *bank;
+ void __iomem *reg;
+ u32 mask, shift, data, pin_offset, cnt;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+
+ /*
+ * for each pin in the pin group selected, program the correspoding pin
+ * pin function number in the config register.
+ */
+ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++) {
+ pin_to_reg_bank(drvdata->gc, pins[cnt] - drvdata->ctrl->base,
+ &reg, &pin_offset, &bank);
+ mask = (1 << bank->func_width) - 1;
+ shift = pin_offset * bank->func_width;
+
+ data = readl(reg);
+ data &= ~(mask << shift);
+ if (enable)
+ data |= drvdata->pin_groups[group].func << shift;
+ writel(data, reg);
+ }
+}
+
+/* enable a specified pinmux by writing to registers */
+static int samsung_pinmux_enable(struct pinctrl_dev *pctldev, unsigned selector,
+ unsigned group)
+{
+ samsung_pinmux_setup(pctldev, selector, group, true);
+ return 0;
+}
+
+/* disable a specified pinmux by writing to registers */
+static void samsung_pinmux_disable(struct pinctrl_dev *pctldev,
+ unsigned selector, unsigned group)
+{
+ samsung_pinmux_setup(pctldev, selector, group, false);
+}
+
+/*
+ * The calls to gpio_direction_output() and gpio_direction_input()
+ * leads to this function call (via the pinctrl_gpio_direction_{input|output}()
+ * function called from the gpiolib interface).
+ */
+static int samsung_pinmux_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range, unsigned offset, bool input)
+{
+ struct samsung_pin_bank *bank;
+ void __iomem *reg;
+ u32 data, pin_offset, mask, shift;
+
+ pin_to_reg_bank(range->gc, offset, &reg, &pin_offset, &bank);
+ mask = (1 << bank->func_width) - 1;
+ shift = pin_offset * bank->func_width;
+
+ data = readl(reg);
+ data &= ~(mask << shift);
+ if (!input)
+ data |= FUNC_OUTPUT << shift;
+ writel(data, reg);
+ return 0;
+}
+
+/* list of pinmux callbacks for the pinmux vertical in pinctrl core */
+static struct pinmux_ops samsung_pinmux_ops = {
+ .get_functions_count = samsung_get_functions_count,
+ .get_function_name = samsung_pinmux_get_fname,
+ .get_function_groups = samsung_pinmux_get_groups,
+ .enable = samsung_pinmux_enable,
+ .disable = samsung_pinmux_disable,
+ .gpio_set_direction = samsung_pinmux_gpio_set_direction,
+};
+
+/* set or get the pin config settings for a specified pin */
+static int samsung_pinconf_rw(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config, bool set)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct samsung_pin_bank *bank;
+ void __iomem *reg_base;
+ enum pincfg_type cfg_type = PINCFG_UNPACK_TYPE(*config);
+ u32 data, width, pin_offset, mask, shift;
+ u32 cfg_value, cfg_reg;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pin_to_reg_bank(drvdata->gc, pin - drvdata->ctrl->base, &reg_base,
+ &pin_offset, &bank);
+
+ switch (cfg_type) {
+ case PINCFG_TYPE_PUD:
+ width = bank->pud_width;
+ cfg_reg = PUD_REG;
+ break;
+ case PINCFG_TYPE_DRV:
+ width = bank->drv_width;
+ cfg_reg = DRV_REG;
+ break;
+ case PINCFG_TYPE_CON_PDN:
+ width = bank->conpdn_width;
+ cfg_reg = CONPDN_REG;
+ break;
+ case PINCFG_TYPE_PUD_PDN:
+ width = bank->pudpdn_width;
+ cfg_reg = PUDPDN_REG;
+ break;
+ default:
+ WARN_ON(1);
+ return -EINVAL;
+ }
+
+ mask = (1 << width) - 1;
+ shift = pin_offset * width;
+ data = readl(reg_base + cfg_reg);
+
+ if (set) {
+ cfg_value = PINCFG_UNPACK_VALUE(*config);
+ data &= ~(mask << shift);
+ data |= (cfg_value << shift);
+ writel(data, reg_base + cfg_reg);
+ } else {
+ data >>= shift;
+ data &= mask;
+ *config = PINCFG_PACK(cfg_type, data);
+ }
+ return 0;
+}
+
+/* set the pin config settings for a specified pin */
+static int samsung_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long config)
+{
+ return samsung_pinconf_rw(pctldev, pin, &config, true);
+}
+
+/* get the pin config settings for a specified pin */
+static int samsung_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *config)
+{
+ return samsung_pinconf_rw(pctldev, pin, config, false);
+}
+
+/* set the pin config settings for a specified pin group */
+static int samsung_pinconf_group_set(struct pinctrl_dev *pctldev,
+ unsigned group, unsigned long config)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+ unsigned int cnt;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+
+ for (cnt = 0; cnt < drvdata->pin_groups[group].num_pins; cnt++)
+ samsung_pinconf_set(pctldev, pins[cnt], config);
+
+ return 0;
+}
+
+/* get the pin config settings for a specified pin group */
+static int samsung_pinconf_group_get(struct pinctrl_dev *pctldev,
+ unsigned int group, unsigned long *config)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ const unsigned int *pins;
+
+ drvdata = pinctrl_dev_get_drvdata(pctldev);
+ pins = drvdata->pin_groups[group].pins;
+ samsung_pinconf_get(pctldev, pins[0], config);
+ return 0;
+}
+
+/* list of pinconfig callbacks for pinconfig vertical in the pinctrl code */
+static struct pinconf_ops samsung_pinconf_ops = {
+ .pin_config_get = samsung_pinconf_get,
+ .pin_config_set = samsung_pinconf_set,
+ .pin_config_group_get = samsung_pinconf_group_get,
+ .pin_config_group_set = samsung_pinconf_group_set,
+};
+
+/* gpiolib gpio_set callback function */
+static void samsung_gpio_set(struct gpio_chip *gc, unsigned offset, int value)
+{
+ void __iomem *reg;
+ u32 pin_offset, data;
+
+ pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+ data = readl(reg + DAT_REG);
+ data &= ~(1 << pin_offset);
+ if (value)
+ data |= 1 << pin_offset;
+ writel(data, reg + DAT_REG);
+}
+
+/* gpiolib gpio_get callback function */
+static int samsung_gpio_get(struct gpio_chip *gc, unsigned offset)
+{
+ void __iomem *reg;
+ u32 pin_offset, data;
+
+ pin_to_reg_bank(gc, offset, &reg, &pin_offset, NULL);
+ data = readl(reg + DAT_REG);
+ data >>= pin_offset;
+ data &= 1;
+ return data;
+}
+
+/*
+ * gpiolib gpio_direction_input callback function. The setting of the pin
+ * mux function as 'gpio input' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_input(struct gpio_chip *gc, unsigned offset)
+{
+ return pinctrl_gpio_direction_input(gc->base + offset);
+}
+
+/*
+ * gpiolib gpio_direction_output callback function. The setting of the pin
+ * mux function as 'gpio output' will be handled by the pinctrl susbsystem
+ * interface.
+ */
+static int samsung_gpio_direction_output(struct gpio_chip *gc, unsigned offset,
+ int value)
+{
+ samsung_gpio_set(gc, offset, value);
+ return pinctrl_gpio_direction_output(gc->base + offset);
+}
+
+/*
+ * Parse the pin names listed in the 'samsung,pins' property and convert it
+ * into a list of gpio numbers are create a pin group from it.
+ */
+static int __init samsung_pinctrl_parse_dt_pins(struct platform_device *pdev,
+ struct device_node *cfg_np, struct pinctrl_desc *pctl,
+ unsigned int **pin_list, unsigned int *npins)
+{
+ struct device *dev = &pdev->dev;
+ struct property *prop;
+ struct pinctrl_pin_desc const *pdesc = pctl->pins;
+ unsigned int idx = 0, cnt;
+ const char *pin_name;
+
+ *npins = of_property_count_strings(cfg_np, "samsung,pins");
+ if (*npins < 0) {
+ dev_err(dev, "invalid pin list in %s node", cfg_np->name);
+ return -EINVAL;
+ }
+
+ *pin_list = devm_kzalloc(dev, *npins * sizeof(**pin_list), GFP_KERNEL);
+ if (!*pin_list) {
+ dev_err(dev, "failed to allocate memory for pin list\n");
+ return -ENOMEM;
+ }
+
+ of_property_for_each_string(cfg_np, "samsung,pins", prop, pin_name) {
+ for (cnt = 0; cnt < pctl->npins; cnt++) {
+ if (pdesc[cnt].name) {
+ if (!strcmp(pin_name, pdesc[cnt].name)) {
+ (*pin_list)[idx++] = pdesc[cnt].number;
+ break;
+ }
+ }
+ }
+ if (cnt == pctl->npins) {
+ dev_err(dev, "pin %s not valid in %s node\n",
+ pin_name, cfg_np->name);
+ devm_kfree(dev, *pin_list);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * Parse the information about all the available pin groups and pin functions
+ * from device node of the pin-controller. A pin group is formed with all
+ * the pins listed in the "samsung,pins" property.
+ */
+static int __init samsung_pinctrl_parse_dt(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dev_np = dev->of_node;
+ struct device_node *cfg_np;
+ struct samsung_pin_group *groups, *grp;
+ struct samsung_pmx_func *functions, *func;
+ unsigned *pin_list;
+ unsigned int npins, grp_cnt, func_idx = 0;
+ char *gname, *fname;
+ int ret;
+
+ grp_cnt = of_get_child_count(dev_np);
+ if (!grp_cnt)
+ return -EINVAL;
+
+ groups = devm_kzalloc(dev, grp_cnt * sizeof(*groups), GFP_KERNEL);
+ if (!groups) {
+ dev_err(dev, "failed allocate memory for ping group list\n");
+ return -EINVAL;
+ }
+ grp = groups;
+
+ functions = devm_kzalloc(dev, grp_cnt * sizeof(*functions), GFP_KERNEL);
+ if (!functions) {
+ dev_err(dev, "failed to allocate memory for function list\n");
+ return -EINVAL;
+ }
+ func = functions;
+
+ /*
+ * Iterate over all the child nodes of the pin controller node
+ * and create pin groups and pin function lists.
+ */
+ for_each_child_of_node(dev_np, cfg_np) {
+ u32 function;
+ if (of_find_property(cfg_np, "interrupt-controller", NULL))
+ continue;
+
+ ret = samsung_pinctrl_parse_dt_pins(pdev, cfg_np,
+ &drvdata->pctl, &pin_list, &npins);
+ if (ret)
+ return ret;
+
+ /* derive pin group name from the node name */
+ gname = devm_kzalloc(dev, strlen(cfg_np->name) + GSUFFIX_LEN,
+ GFP_KERNEL);
+ if (!gname) {
+ dev_err(dev, "failed to alloc memory for group name\n");
+ return -ENOMEM;
+ }
+ sprintf(gname, "%s%s", cfg_np->name, GROUP_SUFFIX);
+
+ grp->name = gname;
+ grp->pins = pin_list;
+ grp->num_pins = npins;
+ of_property_read_u32(cfg_np, "samsung,pin-function", &function);
+ grp->func = function;
+ grp++;
+
+ if (!of_find_property(cfg_np, "samsung,pin-function", NULL))
+ continue;
+
+ /* derive function name from the node name */
+ fname = devm_kzalloc(dev, strlen(cfg_np->name) + FSUFFIX_LEN,
+ GFP_KERNEL);
+ if (!fname) {
+ dev_err(dev, "failed to alloc memory for func name\n");
+ return -ENOMEM;
+ }
+ sprintf(fname, "%s%s", cfg_np->name, FUNCTION_SUFFIX);
+
+ func->name = fname;
+ func->groups = devm_kzalloc(dev, sizeof(char *), GFP_KERNEL);
+ if (!func->groups) {
+ dev_err(dev, "failed to alloc memory for group list "
+ "in pin function");
+ return -ENOMEM;
+ }
+ func->groups[0] = gname;
+ func->num_groups = 1;
+ func++;
+ func_idx++;
+ }
+
+ drvdata->pin_groups = groups;
+ drvdata->nr_groups = grp_cnt;
+ drvdata->pmx_functions = functions;
+ drvdata->nr_functions = func_idx;
+
+ return 0;
+}
+
+/* register the pinctrl interface with the pinctrl subsystem */
+static int __init samsung_pinctrl_register(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct pinctrl_desc *ctrldesc = &drvdata->pctl;
+ struct pinctrl_pin_desc *pindesc, *pdesc;
+ struct samsung_pin_bank *pin_bank;
+ char *pin_names;
+ int pin, bank, ret;
+
+ ctrldesc->name = "samsung-pinctrl";
+ ctrldesc->owner = THIS_MODULE;
+ ctrldesc->pctlops = &samsung_pctrl_ops;
+ ctrldesc->pmxops = &samsung_pinmux_ops;
+ ctrldesc->confops = &samsung_pinconf_ops;
+
+ pindesc = devm_kzalloc(&pdev->dev, sizeof(*pindesc) *
+ drvdata->ctrl->nr_pins, GFP_KERNEL);
+ if (!pindesc) {
+ dev_err(&pdev->dev, "mem alloc for pin descriptors failed\n");
+ return -ENOMEM;
+ }
+ ctrldesc->pins = pindesc;
+ ctrldesc->npins = drvdata->ctrl->nr_pins;
+ ctrldesc->npins = drvdata->ctrl->nr_pins;
+
+ /* dynamically populate the pin number and pin name for pindesc */
+ for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++)
+ pdesc->number = pin + drvdata->ctrl->base;
+
+ /*
+ * allocate space for storing the dynamically generated names for all
+ * the pins which belong to this pin-controller.
+ */
+ pin_names = devm_kzalloc(&pdev->dev, sizeof(char) * PIN_NAME_LENGTH *
+ drvdata->ctrl->nr_pins, GFP_KERNEL);
+ if (!pin_names) {
+ dev_err(&pdev->dev, "mem alloc for pin names failed\n");
+ return -ENOMEM;
+ }
+
+ /* for each pin, the name of the pin is pin-bank name + pin number */
+ for (bank = 0; bank < drvdata->ctrl->nr_banks; bank++) {
+ pin_bank = &drvdata->ctrl->pin_banks[bank];
+ for (pin = 0; pin < pin_bank->nr_pins; pin++) {
+ sprintf(pin_names, "%s-%d", pin_bank->name, pin);
+ pdesc = pindesc + pin_bank->pin_base + pin;
+ pdesc->name = pin_names;
+ pin_names += PIN_NAME_LENGTH;
+ }
+ }
+
+ drvdata->pctl_dev = pinctrl_register(ctrldesc, &pdev->dev, drvdata);
+ if (!drvdata->pctl_dev) {
+ dev_err(&pdev->dev, "could not register pinctrl driver\n");
+ return -EINVAL;
+ }
+
+ drvdata->grange.name = "samsung-pctrl-gpio-range";
+ drvdata->grange.id = 0;
+ drvdata->grange.base = drvdata->ctrl->base;
+ drvdata->grange.npins = drvdata->ctrl->nr_pins;
+ drvdata->grange.gc = drvdata->gc;
+ pinctrl_add_gpio_range(drvdata->pctl_dev, &drvdata->grange);
+
+ ret = samsung_pinctrl_parse_dt(pdev, drvdata);
+ if (ret) {
+ pinctrl_unregister(drvdata->pctl_dev);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* register the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_register(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ struct gpio_chip *gc;
+ int ret;
+
+ gc = devm_kzalloc(&pdev->dev, sizeof(*gc), GFP_KERNEL);
+ if (!gc) {
+ dev_err(&pdev->dev, "mem alloc for gpio_chip failed\n");
+ return -ENOMEM;
+ }
+
+ drvdata->gc = gc;
+ gc->base = drvdata->ctrl->base;
+ gc->ngpio = drvdata->ctrl->nr_pins;
+ gc->dev = &pdev->dev;
+ gc->set = samsung_gpio_set;
+ gc->get = samsung_gpio_get;
+ gc->direction_input = samsung_gpio_direction_input;
+ gc->direction_output = samsung_gpio_direction_output;
+ gc->label = drvdata->ctrl->label;
+ gc->owner = THIS_MODULE;
+ ret = gpiochip_add(gc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register gpio_chip %s, error "
+ "code: %d\n", gc->label, ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+/* unregister the gpiolib interface with the gpiolib subsystem */
+static int __init samsung_gpiolib_unregister(struct platform_device *pdev,
+ struct samsung_pinctrl_drv_data *drvdata)
+{
+ int ret = gpiochip_remove(drvdata->gc);
+ if (ret) {
+ dev_err(&pdev->dev, "gpio chip remove failed\n");
+ return ret;
+ }
+ return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[];
+
+/* retrieve the soc specific data */
+static struct samsung_pin_ctrl *samsung_pinctrl_get_soc_data(
+ struct platform_device *pdev)
+{
+ int id;
+ const struct of_device_id *match;
+ const struct device_node *node = pdev->dev.of_node;
+
+ id = of_alias_get_id(pdev->dev.of_node, "pinctrl");
+ if (id < 0) {
+ dev_err(&pdev->dev, "failed to get alias id\n");
+ return NULL;
+ }
+ match = of_match_node(samsung_pinctrl_dt_match, node);
+ return (struct samsung_pin_ctrl *)match->data + id;
+}
+
+static int __devinit samsung_pinctrl_probe(struct platform_device *pdev)
+{
+ struct samsung_pinctrl_drv_data *drvdata;
+ struct device *dev = &pdev->dev;
+ struct samsung_pin_ctrl *ctrl;
+ struct resource *res;
+ int ret;
+
+ if (!dev->of_node) {
+ dev_err(dev, "device tree node not found\n");
+ return -ENODEV;
+ }
+
+ ctrl = samsung_pinctrl_get_soc_data(pdev);
+ if (!ctrl) {
+ dev_err(&pdev->dev, "driver data not available\n");
+ return -EINVAL;
+ }
+
+ drvdata = devm_kzalloc(dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata) {
+ dev_err(dev, "failed to allocate memory for driver's "
+ "private data\n");
+ return -ENOMEM;
+ }
+ drvdata->ctrl = ctrl;
+ drvdata->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "cannot find IO resource\n");
+ return -ENOENT;
+ }
+
+ drvdata->virt_base = devm_request_and_ioremap(&pdev->dev, res);
+ if (!drvdata->virt_base) {
+ dev_err(dev, "ioremap failed\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res)
+ drvdata->irq = res->start;
+
+ ret = samsung_gpiolib_register(pdev, drvdata);
+ if (ret)
+ return ret;
+
+ ret = samsung_pinctrl_register(pdev, drvdata);
+ if (ret) {
+ samsung_gpiolib_unregister(pdev, drvdata);
+ return ret;
+ }
+
+ if (ctrl->eint_gpio_init)
+ ctrl->eint_gpio_init(drvdata);
+ if (ctrl->eint_wkup_init)
+ ctrl->eint_wkup_init(drvdata);
+
+ platform_set_drvdata(pdev, drvdata);
+ return 0;
+}
+
+static const struct of_device_id samsung_pinctrl_dt_match[] = {
+ { .compatible = "samsung,pinctrl-exynos4210",
+ .data = (void *)exynos4210_pin_ctrl },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_pinctrl_dt_match);
+
+static struct platform_driver samsung_pinctrl_driver = {
+ .probe = samsung_pinctrl_probe,
+ .driver = {
+ .name = "samsung-pinctrl",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(samsung_pinctrl_dt_match),
+ },
+};
+
+static int __init samsung_pinctrl_drv_register(void)
+{
+ return platform_driver_register(&samsung_pinctrl_driver);
+}
+postcore_initcall(samsung_pinctrl_drv_register);
+
+static void __exit samsung_pinctrl_drv_unregister(void)
+{
+ platform_driver_unregister(&samsung_pinctrl_driver);
+}
+module_exit(samsung_pinctrl_drv_unregister);
+
+MODULE_AUTHOR("Thomas Abraham <thomas.ab@samsung.com>");
+MODULE_DESCRIPTION("Samsung pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-samsung.h b/drivers/pinctrl/pinctrl-samsung.h
new file mode 100644
index 00000000000..b8956934cda
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-samsung.h
@@ -0,0 +1,239 @@
+/*
+ * pin-controller/pin-mux/pin-config/gpio-driver for Samsung's SoC's.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ * Copyright (c) 2012 Linaro Ltd
+ * http://www.linaro.org
+ *
+ * Author: Thomas Abraham <thomas.ab@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __PINCTRL_SAMSUNG_H
+#define __PINCTRL_SAMSUNG_H
+
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/pinctrl/machine.h>
+
+/* register offsets within a pin bank */
+#define DAT_REG 0x4
+#define PUD_REG 0x8
+#define DRV_REG 0xC
+#define CONPDN_REG 0x10
+#define PUDPDN_REG 0x14
+
+/* pinmux function number for pin as gpio output line */
+#define FUNC_OUTPUT 0x1
+
+/**
+ * enum pincfg_type - possible pin configuration types supported.
+ * @PINCFG_TYPE_PUD: Pull up/down configuration.
+ * @PINCFG_TYPE_DRV: Drive strength configuration.
+ * @PINCFG_TYPE_CON_PDN: Pin function in power down mode.
+ * @PINCFG_TYPE_PUD_PDN: Pull up/down configuration in power down mode.
+ */
+enum pincfg_type {
+ PINCFG_TYPE_PUD,
+ PINCFG_TYPE_DRV,
+ PINCFG_TYPE_CON_PDN,
+ PINCFG_TYPE_PUD_PDN,
+};
+
+/*
+ * pin configuration (pull up/down and drive strength) type and its value are
+ * packed together into a 16-bits. The upper 8-bits represent the configuration
+ * type and the lower 8-bits hold the value of the configuration type.
+ */
+#define PINCFG_TYPE_MASK 0xFF
+#define PINCFG_VALUE_SHIFT 8
+#define PINCFG_VALUE_MASK (0xFF << PINCFG_VALUE_SHIFT)
+#define PINCFG_PACK(type, value) (((value) << PINCFG_VALUE_SHIFT) | type)
+#define PINCFG_UNPACK_TYPE(cfg) ((cfg) & PINCFG_TYPE_MASK)
+#define PINCFG_UNPACK_VALUE(cfg) (((cfg) & PINCFG_VALUE_MASK) >> \
+ PINCFG_VALUE_SHIFT)
+/**
+ * enum eint_type - possible external interrupt types.
+ * @EINT_TYPE_NONE: bank does not support external interrupts
+ * @EINT_TYPE_GPIO: bank supportes external gpio interrupts
+ * @EINT_TYPE_WKUP: bank supportes external wakeup interrupts
+ *
+ * Samsung GPIO controller groups all the available pins into banks. The pins
+ * in a pin bank can support external gpio interrupts or external wakeup
+ * interrupts or no interrupts at all. From a software perspective, the only
+ * difference between external gpio and external wakeup interrupts is that
+ * the wakeup interrupts can additionally wakeup the system if it is in
+ * suspended state.
+ */
+enum eint_type {
+ EINT_TYPE_NONE,
+ EINT_TYPE_GPIO,
+ EINT_TYPE_WKUP,
+};
+
+/* maximum length of a pin in pin descriptor (example: "gpa0-0") */
+#define PIN_NAME_LENGTH 10
+
+#define PIN_GROUP(n, p, f) \
+ { \
+ .name = n, \
+ .pins = p, \
+ .num_pins = ARRAY_SIZE(p), \
+ .func = f \
+ }
+
+#define PMX_FUNC(n, g) \
+ { \
+ .name = n, \
+ .groups = g, \
+ .num_groups = ARRAY_SIZE(g), \
+ }
+
+struct samsung_pinctrl_drv_data;
+
+/**
+ * struct samsung_pin_bank: represent a controller pin-bank.
+ * @reg_offset: starting offset of the pin-bank registers.
+ * @pin_base: starting pin number of the bank.
+ * @nr_pins: number of pins included in this bank.
+ * @func_width: width of the function selector bit field.
+ * @pud_width: width of the pin pull up/down selector bit field.
+ * @drv_width: width of the pin driver strength selector bit field.
+ * @conpdn_width: width of the sleep mode function selector bin field.
+ * @pudpdn_width: width of the sleep mode pull up/down selector bit field.
+ * @eint_type: type of the external interrupt supported by the bank.
+ * @irq_base: starting controller local irq number of the bank.
+ * @name: name to be prefixed for each pin in this pin bank.
+ */
+struct samsung_pin_bank {
+ u32 pctl_offset;
+ u32 pin_base;
+ u8 nr_pins;
+ u8 func_width;
+ u8 pud_width;
+ u8 drv_width;
+ u8 conpdn_width;
+ u8 pudpdn_width;
+ enum eint_type eint_type;
+ u32 irq_base;
+ char *name;
+};
+
+/**
+ * struct samsung_pin_ctrl: represent a pin controller.
+ * @pin_banks: list of pin banks included in this controller.
+ * @nr_banks: number of pin banks.
+ * @base: starting system wide pin number.
+ * @nr_pins: number of pins supported by the controller.
+ * @nr_gint: number of external gpio interrupts supported.
+ * @nr_wint: number of external wakeup interrupts supported.
+ * @geint_con: offset of the ext-gpio controller registers.
+ * @geint_mask: offset of the ext-gpio interrupt mask registers.
+ * @geint_pend: offset of the ext-gpio interrupt pending registers.
+ * @weint_con: offset of the ext-wakeup controller registers.
+ * @weint_mask: offset of the ext-wakeup interrupt mask registers.
+ * @weint_pend: offset of the ext-wakeup interrupt pending registers.
+ * @svc: offset of the interrupt service register.
+ * @eint_gpio_init: platform specific callback to setup the external gpio
+ * interrupts for the controller.
+ * @eint_wkup_init: platform specific callback to setup the external wakeup
+ * interrupts for the controller.
+ * @label: for debug information.
+ */
+struct samsung_pin_ctrl {
+ struct samsung_pin_bank *pin_banks;
+ u32 nr_banks;
+
+ u32 base;
+ u32 nr_pins;
+ u32 nr_gint;
+ u32 nr_wint;
+
+ u32 geint_con;
+ u32 geint_mask;
+ u32 geint_pend;
+
+ u32 weint_con;
+ u32 weint_mask;
+ u32 weint_pend;
+
+ u32 svc;
+
+ int (*eint_gpio_init)(struct samsung_pinctrl_drv_data *);
+ int (*eint_wkup_init)(struct samsung_pinctrl_drv_data *);
+ char *label;
+};
+
+/**
+ * struct samsung_pinctrl_drv_data: wrapper for holding driver data together.
+ * @virt_base: register base address of the controller.
+ * @dev: device instance representing the controller.
+ * @irq: interrpt number used by the controller to notify gpio interrupts.
+ * @ctrl: pin controller instance managed by the driver.
+ * @pctl: pin controller descriptor registered with the pinctrl subsystem.
+ * @pctl_dev: cookie representing pinctrl device instance.
+ * @pin_groups: list of pin groups available to the driver.
+ * @nr_groups: number of such pin groups.
+ * @pmx_functions: list of pin functions available to the driver.
+ * @nr_function: number of such pin functions.
+ * @gc: gpio_chip instance registered with gpiolib.
+ * @grange: linux gpio pin range supported by this controller.
+ */
+struct samsung_pinctrl_drv_data {
+ void __iomem *virt_base;
+ struct device *dev;
+ int irq;
+
+ struct samsung_pin_ctrl *ctrl;
+ struct pinctrl_desc pctl;
+ struct pinctrl_dev *pctl_dev;
+
+ const struct samsung_pin_group *pin_groups;
+ unsigned int nr_groups;
+ const struct samsung_pmx_func *pmx_functions;
+ unsigned int nr_functions;
+
+ struct irq_domain *gpio_irqd;
+ struct irq_domain *wkup_irqd;
+
+ struct gpio_chip *gc;
+ struct pinctrl_gpio_range grange;
+};
+
+/**
+ * struct samsung_pin_group: represent group of pins of a pinmux function.
+ * @name: name of the pin group, used to lookup the group.
+ * @pins: the pins included in this group.
+ * @num_pins: number of pins included in this group.
+ * @func: the function number to be programmed when selected.
+ */
+struct samsung_pin_group {
+ const char *name;
+ const unsigned int *pins;
+ u8 num_pins;
+ u8 func;
+};
+
+/**
+ * struct samsung_pmx_func: represent a pin function.
+ * @name: name of the pin function, used to lookup the function.
+ * @groups: one or more names of pin groups that provide this function.
+ * @num_groups: number of groups included in @groups.
+ */
+struct samsung_pmx_func {
+ const char *name;
+ const char **groups;
+ u8 num_groups;
+};
+
+/* list of all exported SoC specific data */
+extern struct samsung_pin_ctrl exynos4210_pin_ctrl[];
+
+#endif /* __PINCTRL_SAMSUNG_H */