power_supply: Enable battery-charger for 88pm860x

There are charger and battery measurement feature for 88pm860x PMIC.

For charger, it can support pre-charge with small current when battery is
nearly exausted and then changed into fast-charge with CC&CV mode.

For battery monitor, it can support battery measurement such as
vbat,vsys,vchg and ibat etc,it can aslo accumulating the Coulomb value
charged or discharged from battery based on Conlomb Counter, we use it
to estimate battery capacity.

Signed-off-by: Jett.Zhou <jtzhou@marvell.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

1 files changed, 746 insertions, 0 deletions

diff --git a/drivers/power/88pm860x_charger.c b/drivers/power/88pm860x_charger.c
new file mode 100644
index 00000000000..4fd7614ee83
--- /dev/null
+++ b/drivers/power/88pm860x_charger.c
@@ -0,0 +1,746 @@
+/*
+ * Battery driver for Marvell 88PM860x PMIC
+ *
+ * Copyright (c) 2012 Marvell International Ltd.
+ * Author:	Jett Zhou <jtzhou@marvell.com>
+ *		Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/power_supply.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <asm/div64.h>
+
+/* bit definitions of Status Query Interface 2 */
+#define STATUS2_CHG		(1 << 2)
+
+/* bit definitions of Reset Out Register */
+#define RESET_SW_PD		(1 << 7)
+
+/* bit definitions of PreReg 1 */
+#define PREREG1_90MA		(0x0)
+#define PREREG1_180MA		(0x1)
+#define PREREG1_450MA		(0x4)
+#define PREREG1_540MA		(0x5)
+#define PREREG1_1350MA		(0xE)
+#define PREREG1_VSYS_4_5V	(3 << 4)
+
+/* bit definitions of Charger Control 1 Register */
+#define CC1_MODE_OFF		(0)
+#define CC1_MODE_PRECHARGE	(1)
+#define CC1_MODE_FASTCHARGE	(2)
+#define CC1_MODE_PULSECHARGE	(3)
+#define CC1_ITERM_20MA		(0 << 2)
+#define CC1_ITERM_60MA		(2 << 2)
+#define CC1_VFCHG_4_2V		(9 << 4)
+
+/* bit definitions of Charger Control 2 Register */
+#define CC2_ICHG_100MA		(0x1)
+#define CC2_ICHG_500MA		(0x9)
+#define CC2_ICHG_1000MA		(0x13)
+
+/* bit definitions of Charger Control 3 Register */
+#define CC3_180MIN_TIMEOUT	(0x6 << 4)
+#define CC3_270MIN_TIMEOUT	(0x7 << 4)
+#define CC3_360MIN_TIMEOUT	(0xA << 4)
+#define CC3_DISABLE_TIMEOUT	(0xF << 4)
+
+/* bit definitions of Charger Control 4 Register */
+#define CC4_IPRE_40MA		(7)
+#define CC4_VPCHG_3_2V		(3 << 4)
+#define CC4_IFCHG_MON_EN	(1 << 6)
+#define CC4_BTEMP_MON_EN	(1 << 7)
+
+/* bit definitions of Charger Control 6 Register */
+#define CC6_BAT_OV_EN		(1 << 2)
+#define CC6_BAT_UV_EN		(1 << 3)
+#define CC6_UV_VBAT_SET		(0x3 << 6)	/* 2.8v */
+
+/* bit definitions of Charger Control 7 Register */
+#define CC7_BAT_REM_EN		(1 << 3)
+#define CC7_IFSM_EN		(1 << 7)
+
+/* bit definitions of Measurement Enable 1 Register */
+#define MEAS1_VBAT		(1 << 0)
+
+/* bit definitions of Measurement Enable 3 Register */
+#define MEAS3_IBAT_EN		(1 << 0)
+#define MEAS3_CC_EN		(1 << 2)
+
+#define FSM_INIT		0
+#define FSM_DISCHARGE		1
+#define FSM_PRECHARGE		2
+#define FSM_FASTCHARGE		3
+
+#define PRECHARGE_THRESHOLD	3100
+#define POWEROFF_THRESHOLD	3400
+#define CHARGE_THRESHOLD	4000
+#define DISCHARGE_THRESHOLD	4180
+
+/* over-temperature on PM8606 setting */
+#define OVER_TEMP_FLAG		(1 << 6)
+#define OVTEMP_AUTORECOVER	(1 << 3)
+
+/* over-voltage protect on vchg setting mv */
+#define VCHG_NORMAL_LOW		4200
+#define VCHG_NORMAL_CHECK	5800
+#define VCHG_NORMAL_HIGH	6000
+#define VCHG_OVP_LOW		5500
+
+struct pm860x_charger_info {
+	struct pm860x_chip *chip;
+	struct i2c_client *i2c;
+	struct i2c_client *i2c_8606;
+	struct device *dev;
+
+	struct power_supply usb;
+	struct mutex lock;
+	int irq_nums;
+	int irq[7];
+	unsigned state:3;	/* fsm state */
+	unsigned online:1;	/* usb charger */
+	unsigned present:1;	/* battery present */
+	unsigned allowed:1;
+};
+
+static char *pm860x_supplied_to[] = {
+	"battery-monitor",
+};
+
+static int measure_vchg(struct pm860x_charger_info *info, int *data)
+{
+	unsigned char buf[2];
+	int ret = 0;
+
+	ret = pm860x_bulk_read(info->i2c, PM8607_VCHG_MEAS1, 2, buf);
+	if (ret < 0)
+		return ret;
+
+	*data = ((buf[0] & 0xff) << 4) | (buf[1] & 0x0f);
+	/* V_BATT_MEAS(mV) = value * 5 * 1.8 * 1000 / (2^12) */
+	*data = ((*data & 0xfff) * 9 * 125) >> 9;
+
+	dev_dbg(info->dev, "%s, vchg: %d mv\n", __func__, *data);
+
+	return ret;
+}
+
+static void set_vchg_threshold(struct pm860x_charger_info *info,
+			       int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * / 5 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_LOWTH, data);
+	dev_dbg(info->dev, "VCHG_LOWTH:%dmv, 0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 1125;
+	pm860x_reg_write(info->i2c, PM8607_VCHG_HIGHTH, data);
+	dev_dbg(info->dev, "VCHG_HIGHTH:%dmv, 0x%x\n", max, data);
+
+}
+
+static void set_vbatt_threshold(struct pm860x_charger_info *info,
+				int min, int max)
+{
+	int data;
+
+	/* (tmp << 8) * 3 / 1800 */
+	if (min <= 0)
+		data = 0;
+	else
+		data = (min << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_LOWTH, data);
+	dev_dbg(info->dev, "VBAT Min:%dmv, LOWTH:0x%x\n", min, data);
+
+	if (max <= 0)
+		data = 0xff;
+	else
+		data = (max << 5) / 675;
+	pm860x_reg_write(info->i2c, PM8607_VBAT_HIGHTH, data);
+	dev_dbg(info->dev, "VBAT Max:%dmv, HIGHTH:0x%x\n", max, data);
+
+	return;
+}
+
+static int start_precharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Pre-charging!\n");
+	set_vbatt_threshold(info, 0, 0);
+
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_1350MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	/* stop charging */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_OFF);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set precharge current, termination voltage, IBAT & TBAT monitor */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL4,
+			       CC4_IPRE_40MA | CC4_VPCHG_3_2V |
+			       CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* trigger precharge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_PRECHARGE);
+out:
+	return ret;
+}
+
+static int start_fastcharge(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	dev_dbg(info->dev, "Start Fast-charging!\n");
+
+	/* set fastcharge termination current & voltage, disable charging */
+	ret = pm860x_reg_write(info->i2c, PM8607_CHG_CTRL1,
+			       CC1_MODE_OFF | CC1_ITERM_60MA |
+			       CC1_VFCHG_4_2V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_reg_write(info->i2c_8606, PM8606_PREREGULATORA,
+			       PREREG1_540MA | PREREG1_VSYS_4_5V);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL2, 0x1f,
+			      CC2_ICHG_500MA);
+	if (ret < 0)
+		goto out;
+	/* set 270 minutes timeout */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL3, (0xf << 4),
+			      CC3_270MIN_TIMEOUT);
+	if (ret < 0)
+		goto out;
+	/* set IBAT & TBAT monitor */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL4,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN,
+			      CC4_IFCHG_MON_EN | CC4_BTEMP_MON_EN);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL6,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET,
+			      CC6_BAT_OV_EN | CC6_BAT_UV_EN |
+			      CC6_UV_VBAT_SET);
+	if (ret < 0)
+		goto out;
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL7,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN,
+			      CC7_BAT_REM_EN | CC7_IFSM_EN);
+	if (ret < 0)
+		goto out;
+	/* launch fast-charge */
+	ret = pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3,
+			      CC1_MODE_FASTCHARGE);
+	/* vchg threshold setting */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_NORMAL_HIGH);
+out:
+	return ret;
+}
+
+static void stop_charge(struct pm860x_charger_info *info, int vbatt)
+{
+	dev_dbg(info->dev, "Stop charging!\n");
+	pm860x_set_bits(info->i2c, PM8607_CHG_CTRL1, 3, CC1_MODE_OFF);
+	if (vbatt > CHARGE_THRESHOLD && info->online)
+		set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+}
+
+static void power_off_notification(struct pm860x_charger_info *info)
+{
+	dev_dbg(info->dev, "Power-off notification!\n");
+}
+
+static int set_charging_fsm(struct pm860x_charger_info *info)
+{
+	struct power_supply *psy;
+	union power_supply_propval data;
+	unsigned char fsm_state[][16] = { "init", "discharge", "precharge",
+		"fastcharge",
+	};
+	int ret;
+	int vbatt;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		return -EINVAL;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &data);
+	if (ret)
+		return ret;
+	vbatt = data.intval / 1000;
+
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT, &data);
+	if (ret)
+		return ret;
+
+	mutex_lock(&info->lock);
+	info->present = data.intval;
+
+	dev_dbg(info->dev, "Entering FSM:%s, Charger:%s, Battery:%s, "
+		"Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	dev_dbg(info->dev, "set_charging_fsm:vbatt:%d(mV)\n", vbatt);
+
+	switch (info->state) {
+	case FSM_INIT:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt > DISCHARGE_THRESHOLD) {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD) {
+				power_off_notification(info);
+			} else {
+				info->state = FSM_DISCHARGE;
+				stop_charge(info, vbatt);
+			}
+		}
+		break;
+	case FSM_PRECHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt > PRECHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_FASTCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			}
+		} else {
+			info->state = FSM_DISCHARGE;
+			stop_charge(info, vbatt);
+		}
+		break;
+	case FSM_DISCHARGE:
+		if (info->online && info->present && info->allowed) {
+			if (vbatt < PRECHARGE_THRESHOLD) {
+				info->state = FSM_PRECHARGE;
+				start_precharge(info);
+			} else if (vbatt < DISCHARGE_THRESHOLD) {
+				info->state = FSM_FASTCHARGE;
+				start_fastcharge(info);
+			}
+		} else {
+			if (vbatt < POWEROFF_THRESHOLD)
+				power_off_notification(info);
+			else if (vbatt > CHARGE_THRESHOLD && info->online)
+				set_vbatt_threshold(info, CHARGE_THRESHOLD, 0);
+		}
+		break;
+	default:
+		dev_warn(info->dev, "FSM meets wrong state:%d\n",
+			 info->state);
+		break;
+	}
+	dev_dbg(info->dev,
+		"Out FSM:%s, Charger:%s, Battery:%s, Allowed:%d\n",
+		&fsm_state[info->state][0],
+		(info->online) ? "online" : "N/A",
+		(info->present) ? "present" : "N/A", info->allowed);
+	mutex_unlock(&info->lock);
+
+	return 0;
+}
+
+static irqreturn_t pm860x_charger_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int ret;
+
+	mutex_lock(&info->lock);
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0) {
+		mutex_unlock(&info->lock);
+		goto out;
+	}
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Charger:%s, Allowed:%d\n", __func__,
+		(info->online) ? "online" : "N/A", info->allowed);
+
+	set_charging_fsm(info);
+
+	power_supply_changed(&info->usb);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_temp_handler(int irq, void *data)
+{
+	struct power_supply *psy;
+	struct pm860x_charger_info *info = data;
+	union power_supply_propval temp;
+	int value;
+	int ret;
+
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		goto out;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_TEMP, &temp);
+	if (ret)
+		goto out;
+	value = temp.intval / 10;
+
+	mutex_lock(&info->lock);
+	/* Temperature < -10 C or >40 C, Will not allow charge */
+	if (value < -10 || value > 40)
+		info->allowed = 0;
+	else
+		info->allowed = 1;
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+out:
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_exception_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+	info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, irq: %d\n", __func__, irq);
+
+	set_charging_fsm(info);
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_done_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	struct power_supply *psy;
+	union power_supply_propval val;
+	int ret;
+	int vbatt;
+
+	mutex_lock(&info->lock);
+	/* pre-charge done, will transimit to fast-charge stage */
+	if (info->state == FSM_PRECHARGE) {
+		info->allowed = 1;
+		goto out;
+	}
+	/*
+	 * Fast charge done, delay to read
+	 * the correct status of CHG_DET.
+	 */
+	mdelay(5);
+	info->allowed = 0;
+	psy = power_supply_get_by_name(pm860x_supplied_to[0]);
+	if (!psy)
+		goto out;
+	ret = psy->get_property(psy, POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
+	if (ret)
+		goto out;
+	vbatt = val.intval / 1000;
+	/*
+	 * CHG_DONE interrupt is faster than CHG_DET interrupt when
+	 * plug in/out usb, So we can not rely on info->online, we
+	 * need check pm8607 status register to check usb is online
+	 * or not, then we can decide it is real charge done
+	 * automatically or it is triggered by usb plug out;
+	 */
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		goto out;
+	if (vbatt > CHARGE_THRESHOLD && ret & STATUS2_CHG)
+		psy->set_property(psy, POWER_SUPPLY_PROP_CHARGE_FULL, &val);
+
+out:
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vbattery_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+
+	mutex_lock(&info->lock);
+
+	set_vbatt_threshold(info, 0, 0);
+
+	if (info->present && info->online)
+		info->allowed = 1;
+	else
+		info->allowed = 0;
+	mutex_unlock(&info->lock);
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+
+	set_charging_fsm(info);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t pm860x_vchg_handler(int irq, void *data)
+{
+	struct pm860x_charger_info *info = data;
+	int vchg = 0;
+
+	if (info->present)
+		goto out;
+
+	measure_vchg(info, &vchg);
+
+	mutex_lock(&info->lock);
+	if (!info->online) {
+		int status;
+		/* check if over-temp on pm8606 or not */
+		status = pm860x_reg_read(info->i2c_8606, PM8606_FLAGS);
+		if (status & OVER_TEMP_FLAG) {
+			/* clear over temp flag and set auto recover */
+			pm860x_set_bits(info->i2c_8606, PM8606_FLAGS,
+					OVER_TEMP_FLAG, OVER_TEMP_FLAG);
+			pm860x_set_bits(info->i2c_8606,
+					PM8606_VSYS,
+					OVTEMP_AUTORECOVER,
+					OVTEMP_AUTORECOVER);
+			dev_dbg(info->dev,
+				"%s, pm8606 over-temp occure\n", __func__);
+		}
+	}
+
+	if (vchg > VCHG_NORMAL_CHECK) {
+		set_vchg_threshold(info, VCHG_OVP_LOW, 0);
+		info->allowed = 0;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg occure,vchg = %dmv\n",
+			__func__, vchg);
+	} else if (vchg < VCHG_OVP_LOW) {
+		set_vchg_threshold(info, VCHG_NORMAL_LOW,
+				   VCHG_NORMAL_HIGH);
+		info->allowed = 1;
+		dev_dbg(info->dev,
+			"%s,pm8607 over-vchg recover,vchg = %dmv\n",
+			__func__, vchg);
+	}
+	mutex_unlock(&info->lock);
+
+	dev_dbg(info->dev, "%s, Allowed: %d\n", __func__, info->allowed);
+	set_charging_fsm(info);
+out:
+	return IRQ_HANDLED;
+}
+
+static int pm860x_usb_get_prop(struct power_supply *psy,
+			       enum power_supply_property psp,
+			       union power_supply_propval *val)
+{
+	struct pm860x_charger_info *info =
+	    dev_get_drvdata(psy->dev->parent);
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_STATUS:
+		if (info->state == FSM_FASTCHARGE ||
+				info->state == FSM_PRECHARGE)
+			val->intval = POWER_SUPPLY_STATUS_CHARGING;
+		else
+			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = info->online;
+		break;
+	default:
+		return -ENODEV;
+	}
+	return 0;
+}
+
+static enum power_supply_property pm860x_usb_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_ONLINE,
+};
+
+static int pm860x_init_charger(struct pm860x_charger_info *info)
+{
+	int ret;
+
+	ret = pm860x_reg_read(info->i2c, PM8607_STATUS_2);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&info->lock);
+	info->state = FSM_INIT;
+	if (ret & STATUS2_CHG) {
+		info->online = 1;
+		info->allowed = 1;
+	} else {
+		info->online = 0;
+		info->allowed = 0;
+	}
+	mutex_unlock(&info->lock);
+
+	set_charging_fsm(info);
+	return 0;
+}
+
+struct pm860x_irq_desc {
+	const char *name;
+	irqreturn_t (*handler)(int irq, void *data);
+} pm860x_irq_descs[] = {
+	{ "usb supply detect", pm860x_charger_handler },
+	{ "charge done", pm860x_done_handler },
+	{ "charge timeout", pm860x_exception_handler },
+	{ "charge fault", pm860x_exception_handler },
+	{ "temperature", pm860x_temp_handler },
+	{ "vbatt", pm860x_vbattery_handler },
+	{ "vchg", pm860x_vchg_handler },
+};
+
+static __devinit int pm860x_charger_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_charger_info *info;
+	int ret;
+	int count;
+	int i;
+	int j;
+
+	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+	if (!info)
+		return -ENOMEM;
+
+	count = pdev->num_resources;
+	for (i = 0, j = 0; i < count; i++) {
+		info->irq[j] = platform_get_irq(pdev, i);
+		if (info->irq[j] < 0)
+			continue;
+		j++;
+	}
+	info->irq_nums = j;
+
+	info->chip = chip;
+	info->i2c =
+	    (chip->id == CHIP_PM8607) ? chip->client : chip->companion;
+	info->i2c_8606 =
+	    (chip->id == CHIP_PM8607) ? chip->companion : chip->client;
+	if (!info->i2c_8606) {
+		dev_err(&pdev->dev, "Missed I2C address of 88PM8606!\n");
+		ret = -EINVAL;
+		goto out;
+	}
+	info->dev = &pdev->dev;
+
+	/* set init value for the case we are not using battery */
+	set_vchg_threshold(info, VCHG_NORMAL_LOW, VCHG_OVP_LOW);
+
+	mutex_init(&info->lock);
+	platform_set_drvdata(pdev, info);
+
+	info->usb.name = "usb";
+	info->usb.type = POWER_SUPPLY_TYPE_USB;
+	info->usb.supplied_to = pm860x_supplied_to;
+	info->usb.num_supplicants = ARRAY_SIZE(pm860x_supplied_to);
+	info->usb.properties = pm860x_usb_props;
+	info->usb.num_properties = ARRAY_SIZE(pm860x_usb_props);
+	info->usb.get_property = pm860x_usb_get_prop;
+	ret = power_supply_register(&pdev->dev, &info->usb);
+	if (ret)
+		goto out;
+
+	pm860x_init_charger(info);
+
+	for (i = 0; i < ARRAY_SIZE(info->irq); i++) {
+		ret = request_threaded_irq(info->irq[i], NULL,
+			pm860x_irq_descs[i].handler,
+			IRQF_ONESHOT, pm860x_irq_descs[i].name, info);
+		if (ret < 0) {
+			dev_err(chip->dev, "Failed to request IRQ: #%d: %d\n",
+				info->irq[i], ret);
+			goto out_irq;
+		}
+	}
+	return 0;
+
+out_irq:
+	while (--i >= 0)
+		free_irq(info->irq[i], info);
+out:
+	kfree(info);
+	return ret;
+}
+
+static int __devexit pm860x_charger_remove(struct platform_device *pdev)
+{
+	struct pm860x_charger_info *info = platform_get_drvdata(pdev);
+	int i;
+
+	platform_set_drvdata(pdev, NULL);
+	power_supply_unregister(&info->usb);
+	free_irq(info->irq[0], info);
+	for (i = 0; i < info->irq_nums; i++)
+		free_irq(info->irq[i], info);
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver pm860x_charger_driver = {
+	.driver = {
+		   .name = "88pm860x-charger",
+		   .owner = THIS_MODULE,
+	},
+	.probe = pm860x_charger_probe,
+	.remove = __devexit_p(pm860x_charger_remove),
+};
+module_platform_driver(pm860x_charger_driver);
+
+MODULE_DESCRIPTION("Marvell 88PM860x Charger driver");
+MODULE_LICENSE("GPL");