ab8500-bm: Add support for the new ab8540 platform

Provide AB8540 platform specific information required to run the
Battery Management subsystem on AB8540 based devices. For this to
happen we see the introduction of separate platform specific data
structures and a means in which to process them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>

1 files changed, 35 insertions, 7 deletions

diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index 91ad3edf619..7336dcf45f7 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -42,6 +42,9 @@
 #define BTEMP_BATCTRL_CURR_SRC_16UA	16
 #define BTEMP_BATCTRL_CURR_SRC_18UA	18
 
+#define BTEMP_BATCTRL_CURR_SRC_60UA	60
+#define BTEMP_BATCTRL_CURR_SRC_120UA	120
+
 #define to_ab8500_btemp_device_info(x) container_of((x), \
 	struct ab8500_btemp, btemp_psy);
 
@@ -216,7 +219,12 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	/* Only do this for batteries with internal NTC */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && enable) {
 
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		if (is_ab8540(di->parent)) {
+			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_60UA)
+				curr = BAT_CTRL_60U_ENA;
+			else
+				curr = BAT_CTRL_120U_ENA;
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 			if (di->curr_source == BTEMP_BATCTRL_CURR_SRC_16UA)
 				curr = BAT_CTRL_16U_ENA;
 			else
@@ -257,7 +265,14 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	} else if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL && !enable) {
 		dev_dbg(di->dev, "Disable BATCTRL curr source\n");
 
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+		if (is_ab8540(di->parent)) {
+			/* Write 0 to the curr bits */
+			ret = abx500_mask_and_set_register_interruptible(
+				di->dev,
+				AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+				BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+				~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 			/* Write 0 to the curr bits */
 			ret = abx500_mask_and_set_register_interruptible(
 				di->dev,
@@ -314,7 +329,13 @@ static int ab8500_btemp_curr_source_enable(struct ab8500_btemp *di,
 	 * if we got an error above
 	 */
 disable_curr_source:
-	if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+	if (is_ab8540(di->parent)) {
+		/* Write 0 to the curr bits */
+		ret = abx500_mask_and_set_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
+			BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA,
+			~(BAT_CTRL_60U_ENA | BAT_CTRL_120U_ENA));
+	} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
 		/* Write 0 to the curr bits */
 		ret = abx500_mask_and_set_register_interruptible(di->dev,
 			AB8500_CHARGER, AB8500_BAT_CTRL_CURRENT_SOURCE,
@@ -541,7 +562,9 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 {
 	int res;
 	u8 i;
-	if (is_ab9540(di->parent) || is_ab8505(di->parent))
+	if (is_ab8540(di->parent))
+		di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+	else if (is_ab9540(di->parent) || is_ab8505(di->parent))
 		di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
 	else
 		di->curr_source = BTEMP_BATCTRL_CURR_SRC_7UA;
@@ -582,9 +605,14 @@ static int ab8500_btemp_id(struct ab8500_btemp *di)
 	 * detected type is Type 1, else we use the 7uA source
 	 */
 	if (di->bm->adc_therm == ABx500_ADC_THERM_BATCTRL &&
-			di->bm->batt_id == 1) {
-		if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
-			dev_dbg(di->dev, "Set BATCTRL current source to 16uA\n");
+	    di->bm->batt_id == 1) {
+		if (is_ab8540(di->parent)) {
+			dev_dbg(di->dev,
+				"Set BATCTRL current source to 60uA\n");
+			di->curr_source = BTEMP_BATCTRL_CURR_SRC_60UA;
+		} else if (is_ab9540(di->parent) || is_ab8505(di->parent)) {
+			dev_dbg(di->dev,
+				"Set BATCTRL current source to 16uA\n");
 			di->curr_source = BTEMP_BATCTRL_CURR_SRC_16UA;
 		} else {
 			dev_dbg(di->dev, "Set BATCTRL current source to 20uA\n");