Merge tag 'for-v3.6' of git://git.infradead.org/battery-2.6

Pull battery updates from Anton Vorontsov:
 "The tag contains just a few battery-related changes for v3.6.  It's is
  all pretty straightforward, except one thing.

  One of our patches added thermal support for power supply class, but
  thermal/ subsystem changed under our feet.  We (well, Stephen, that
  is) caught the issue and it was decided[1] that I'd just delay the
  battery pull request, and then will fix it up by merging upstream back
  into battery tree at the specific commit.

  That's not all though: another[2] small fixup for thermal subsystem
  was needed to get rid of a warning in power supply subsystem (the
  warning was not drivers/power's "fault", the thermal registration
  function just needed a proper const annotation, which is also done by
  a small commit on top of the merge.

  So, to sum this up:
   - The 'master' branch of the battery tree was in the -next tree for
     weeks, was never rebased, altered etc.  It should be all OK;
   - Although, for-v3.6 tag contains the 'master' branch + merge + the
     warning fix.

  [1] http://lkml.org/lkml/2012/6/19/23
  [2] http://lkml.org/lkml/2012/6/18/28"

* tag 'for-v3.6' of git://git.infradead.org/battery-2.6: (23 commits)
  thermal: Constify 'type' argument for the registration routine
  olpc-battery: update CHARGE_FULL_DESIGN property for BYD LiFe batteries
  olpc-battery: Add VOLTAGE_MAX_DESIGN property
  charger-manager: Fix build break related to EXTCON
  lp8727_charger: Move header file into platform_data directory
  power_supply: Add min/max alert properties for CAPACITY, TEMP, TEMP_AMBIENT
  bq27x00_battery: Add support for BQ27425 chip
  charger-manager: Set current limit of regulator for over current protection
  charger-manager: Use EXTCON Subsystem to detect charger cables for charging
  test_power: Add VOLTAGE_NOW and BATTERY_TEMP properties
  test_power: Add support for USB AC source
  gpio-charger: Use cansleep version of gpio_set_value
  bq27x00_battery: Add support for power average and health properties
  sbs-battery: Don't trigger false supply_changed event
  twl4030_charger: Allow charger to control the regulator that feeds it
  twl4030_charger: Add backup-battery charging
  twl4030_charger: Fix some typos
  max17042_battery: Support CHARGE_COUNTER power supply attribute
  smb347-charger: Add constant charge and current properties
  power_supply: Add constant charge_current and charge_voltage properties
  ...

1 files changed, 77 insertions, 3 deletions

diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index 7cacbaa68ef..15f4d5d8611 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -22,6 +22,7 @@
 #include <linux/power_supply.h>
 #include <linux/notifier.h>
 #include <linux/usb/otg.h>
+#include <linux/regulator/machine.h>
 
 #define TWL4030_BCIMSTATEC	0x02
 #define TWL4030_BCIICHG		0x08
@@ -29,6 +30,7 @@
 #define TWL4030_BCIVBUS		0x0c
 #define TWL4030_BCIMFSTS4	0x10
 #define TWL4030_BCICTL1		0x23
+#define TWL4030_BB_CFG		0x12
 
 #define TWL4030_BCIAUTOWEN	BIT(5)
 #define TWL4030_CONFIG_DONE	BIT(4)
@@ -38,6 +40,17 @@
 #define TWL4030_USBFASTMCHG	BIT(2)
 #define TWL4030_STS_VBUS	BIT(7)
 #define TWL4030_STS_USB_ID	BIT(2)
+#define TWL4030_BBCHEN		BIT(4)
+#define TWL4030_BBSEL_MASK	0b1100
+#define TWL4030_BBSEL_2V5	0b0000
+#define TWL4030_BBSEL_3V0	0b0100
+#define TWL4030_BBSEL_3V1	0b1000
+#define TWL4030_BBSEL_3V2	0b1100
+#define TWL4030_BBISEL_MASK	0b11
+#define TWL4030_BBISEL_25uA	0b00
+#define TWL4030_BBISEL_150uA	0b01
+#define TWL4030_BBISEL_500uA	0b10
+#define TWL4030_BBISEL_1000uA	0b11
 
 /* BCI interrupts */
 #define TWL4030_WOVF		BIT(0) /* Watchdog overflow */
@@ -75,6 +88,8 @@ struct twl4030_bci {
 	struct work_struct	work;
 	int			irq_chg;
 	int			irq_bci;
+	struct regulator	*usb_reg;
+	int			usb_enabled;
 
 	unsigned long		event;
 };
@@ -104,7 +119,7 @@ static int twl4030_bci_read(u8 reg, u8 *val)
 
 static int twl4030_clear_set_boot_bci(u8 clear, u8 set)
 {
-	return twl4030_clear_set(TWL4030_MODULE_PM_MASTER, 0,
+	return twl4030_clear_set(TWL4030_MODULE_PM_MASTER, clear,
 			TWL4030_CONFIG_DONE | TWL4030_BCIAUTOWEN | set,
 			TWL4030_PM_MASTER_BOOT_BCI);
 }
@@ -152,14 +167,14 @@ static int twl4030_bci_have_vbus(struct twl4030_bci *bci)
 }
 
 /*
- * Enable/Disable USB Charge funtionality.
+ * Enable/Disable USB Charge functionality.
  */
 static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 {
 	int ret;
 
 	if (enable) {
-		/* Check for USB charger conneted */
+		/* Check for USB charger connected */
 		if (!twl4030_bci_have_vbus(bci))
 			return -ENODEV;
 
@@ -172,6 +187,12 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 			return -EACCES;
 		}
 
+		/* Need to keep regulator on */
+		if (!bci->usb_enabled) {
+			regulator_enable(bci->usb_reg);
+			bci->usb_enabled = 1;
+		}
+
 		/* forcing the field BCIAUTOUSB (BOOT_BCI[1]) to 1 */
 		ret = twl4030_clear_set_boot_bci(0, TWL4030_BCIAUTOUSB);
 		if (ret < 0)
@@ -182,6 +203,10 @@ static int twl4030_charger_enable_usb(struct twl4030_bci *bci, bool enable)
 			TWL4030_USBFASTMCHG, TWL4030_BCIMFSTS4);
 	} else {
 		ret = twl4030_clear_set_boot_bci(TWL4030_BCIAUTOUSB, 0);
+		if (bci->usb_enabled) {
+			regulator_disable(bci->usb_reg);
+			bci->usb_enabled = 0;
+		}
 	}
 
 	return ret;
@@ -203,6 +228,49 @@ static int twl4030_charger_enable_ac(bool enable)
 }
 
 /*
+ * Enable/Disable charging of Backup Battery.
+ */
+static int twl4030_charger_enable_backup(int uvolt, int uamp)
+{
+	int ret;
+	u8 flags;
+
+	if (uvolt < 2500000 ||
+	    uamp < 25) {
+		/* disable charging of backup battery */
+		ret = twl4030_clear_set(TWL4030_MODULE_PM_RECEIVER,
+					TWL4030_BBCHEN, 0, TWL4030_BB_CFG);
+		return ret;
+	}
+
+	flags = TWL4030_BBCHEN;
+	if (uvolt >= 3200000)
+		flags |= TWL4030_BBSEL_3V2;
+	else if (uvolt >= 3100000)
+		flags |= TWL4030_BBSEL_3V1;
+	else if (uvolt >= 3000000)
+		flags |= TWL4030_BBSEL_3V0;
+	else
+		flags |= TWL4030_BBSEL_2V5;
+
+	if (uamp >= 1000)
+		flags |= TWL4030_BBISEL_1000uA;
+	else if (uamp >= 500)
+		flags |= TWL4030_BBISEL_500uA;
+	else if (uamp >= 150)
+		flags |= TWL4030_BBISEL_150uA;
+	else
+		flags |= TWL4030_BBISEL_25uA;
+
+	ret = twl4030_clear_set(TWL4030_MODULE_PM_RECEIVER,
+				TWL4030_BBSEL_MASK | TWL4030_BBISEL_MASK,
+				flags,
+				TWL4030_BB_CFG);
+
+	return ret;
+}
+
+/*
  * TWL4030 CHG_PRES (AC charger presence) events
  */
 static irqreturn_t twl4030_charger_interrupt(int irq, void *arg)
@@ -425,6 +493,7 @@ static enum power_supply_property twl4030_charger_props[] = {
 static int __init twl4030_bci_probe(struct platform_device *pdev)
 {
 	struct twl4030_bci *bci;
+	struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
 	int ret;
 	u32 reg;
 
@@ -456,6 +525,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 	bci->usb.num_properties = ARRAY_SIZE(twl4030_charger_props);
 	bci->usb.get_property = twl4030_bci_get_property;
 
+	bci->usb_reg = regulator_get(bci->dev, "bci3v1");
+
 	ret = power_supply_register(&pdev->dev, &bci->usb);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to register usb: %d\n", ret);
@@ -504,6 +575,8 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
 
 	twl4030_charger_enable_ac(true);
 	twl4030_charger_enable_usb(bci, true);
+	twl4030_charger_enable_backup(pdata->bb_uvolt,
+				      pdata->bb_uamp);
 
 	return 0;
 
@@ -532,6 +605,7 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
 
 	twl4030_charger_enable_ac(false);
 	twl4030_charger_enable_usb(bci, false);
+	twl4030_charger_enable_backup(0, 0);
 
 	/* mask interrupts */
 	twl_i2c_write_u8(TWL4030_MODULE_INTERRUPTS, 0xff,