ab8500-charger: AB8500 charger driver

This driver is responsible for detecting the ac/usb plugin and also includes
function to enable ac/usb charging and re-kick the watchdog.
It registers with the power supply class and provides information to the user
space. The information include status of ac/usb charger device.
This information in turn will be used by the abx500 charging algorithm driver
to enable/disable and monitor charging.

Signed-off-by: Arun Murthy <arun.murthy@stericsson.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>

1 files changed, 2789 insertions, 0 deletions

diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
new file mode 100644
index 00000000000..bbc541a59a3
--- /dev/null
+++ b/drivers/power/ab8500_charger.c
@@ -0,0 +1,2789 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Charger driver for AB8500
+ *
+ * License Terms: GNU General Public License v2
+ * Author:
+ *	Johan Palsson <johan.palsson@stericsson.com>
+ *	Karl Komierowski <karl.komierowski@stericsson.com>
+ *	Arun R Murthy <arun.murthy@stericsson.com>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/completion.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/workqueue.h>
+#include <linux/kobject.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
+#include <linux/mfd/abx500/ux500_chargalg.h>
+#include <linux/usb/otg.h>
+
+/* Charger constants */
+#define NO_PW_CONN			0
+#define AC_PW_CONN			1
+#define USB_PW_CONN			2
+
+#define MAIN_WDOG_ENA			0x01
+#define MAIN_WDOG_KICK			0x02
+#define MAIN_WDOG_DIS			0x00
+#define CHARG_WD_KICK			0x01
+#define MAIN_CH_ENA			0x01
+#define MAIN_CH_NO_OVERSHOOT_ENA_N	0x02
+#define USB_CH_ENA			0x01
+#define USB_CHG_NO_OVERSHOOT_ENA_N	0x02
+#define MAIN_CH_DET			0x01
+#define MAIN_CH_CV_ON			0x04
+#define USB_CH_CV_ON			0x08
+#define VBUS_DET_DBNC100		0x02
+#define VBUS_DET_DBNC1			0x01
+#define OTP_ENABLE_WD			0x01
+
+#define MAIN_CH_INPUT_CURR_SHIFT	4
+#define VBUS_IN_CURR_LIM_SHIFT		4
+
+#define LED_INDICATOR_PWM_ENA		0x01
+#define LED_INDICATOR_PWM_DIS		0x00
+#define LED_IND_CUR_5MA			0x04
+#define LED_INDICATOR_PWM_DUTY_252_256	0xBF
+
+/* HW failure constants */
+#define MAIN_CH_TH_PROT			0x02
+#define VBUS_CH_NOK			0x08
+#define USB_CH_TH_PROT			0x02
+#define VBUS_OVV_TH			0x01
+#define MAIN_CH_NOK			0x01
+#define VBUS_DET			0x80
+
+/* UsbLineStatus register bit masks */
+#define AB8500_USB_LINK_STATUS		0x78
+#define AB8500_STD_HOST_SUSP		0x18
+
+/* Watchdog timeout constant */
+#define WD_TIMER			0x30 /* 4min */
+#define WD_KICK_INTERVAL		(60 * HZ)
+
+/* Lowest charger voltage is 3.39V -> 0x4E */
+#define LOW_VOLT_REG			0x4E
+
+/* UsbLineStatus register - usb types */
+enum ab8500_charger_link_status {
+	USB_STAT_NOT_CONFIGURED,
+	USB_STAT_STD_HOST_NC,
+	USB_STAT_STD_HOST_C_NS,
+	USB_STAT_STD_HOST_C_S,
+	USB_STAT_HOST_CHG_NM,
+	USB_STAT_HOST_CHG_HS,
+	USB_STAT_HOST_CHG_HS_CHIRP,
+	USB_STAT_DEDICATED_CHG,
+	USB_STAT_ACA_RID_A,
+	USB_STAT_ACA_RID_B,
+	USB_STAT_ACA_RID_C_NM,
+	USB_STAT_ACA_RID_C_HS,
+	USB_STAT_ACA_RID_C_HS_CHIRP,
+	USB_STAT_HM_IDGND,
+	USB_STAT_RESERVED,
+	USB_STAT_NOT_VALID_LINK,
+};
+
+enum ab8500_usb_state {
+	AB8500_BM_USB_STATE_RESET_HS,	/* HighSpeed Reset */
+	AB8500_BM_USB_STATE_RESET_FS,	/* FullSpeed/LowSpeed Reset */
+	AB8500_BM_USB_STATE_CONFIGURED,
+	AB8500_BM_USB_STATE_SUSPEND,
+	AB8500_BM_USB_STATE_RESUME,
+	AB8500_BM_USB_STATE_MAX,
+};
+
+/* VBUS input current limits supported in AB8500 in mA */
+#define USB_CH_IP_CUR_LVL_0P05		50
+#define USB_CH_IP_CUR_LVL_0P09		98
+#define USB_CH_IP_CUR_LVL_0P19		193
+#define USB_CH_IP_CUR_LVL_0P29		290
+#define USB_CH_IP_CUR_LVL_0P38		380
+#define USB_CH_IP_CUR_LVL_0P45		450
+#define USB_CH_IP_CUR_LVL_0P5		500
+#define USB_CH_IP_CUR_LVL_0P6		600
+#define USB_CH_IP_CUR_LVL_0P7		700
+#define USB_CH_IP_CUR_LVL_0P8		800
+#define USB_CH_IP_CUR_LVL_0P9		900
+#define USB_CH_IP_CUR_LVL_1P0		1000
+#define USB_CH_IP_CUR_LVL_1P1		1100
+#define USB_CH_IP_CUR_LVL_1P3		1300
+#define USB_CH_IP_CUR_LVL_1P4		1400
+#define USB_CH_IP_CUR_LVL_1P5		1500
+
+#define VBAT_TRESH_IP_CUR_RED		3800
+
+#define to_ab8500_charger_usb_device_info(x) container_of((x), \
+	struct ab8500_charger, usb_chg)
+#define to_ab8500_charger_ac_device_info(x) container_of((x), \
+	struct ab8500_charger, ac_chg)
+
+/**
+ * struct ab8500_charger_interrupts - ab8500 interupts
+ * @name:	name of the interrupt
+ * @isr		function pointer to the isr
+ */
+struct ab8500_charger_interrupts {
+	char *name;
+	irqreturn_t (*isr)(int irq, void *data);
+};
+
+struct ab8500_charger_info {
+	int charger_connected;
+	int charger_online;
+	int charger_voltage;
+	int cv_active;
+	bool wd_expired;
+};
+
+struct ab8500_charger_event_flags {
+	bool mainextchnotok;
+	bool main_thermal_prot;
+	bool usb_thermal_prot;
+	bool vbus_ovv;
+	bool usbchargernotok;
+	bool chgwdexp;
+	bool vbus_collapse;
+};
+
+struct ab8500_charger_usb_state {
+	bool usb_changed;
+	int usb_current;
+	enum ab8500_usb_state state;
+	spinlock_t usb_lock;
+};
+
+/**
+ * struct ab8500_charger - ab8500 Charger device information
+ * @dev:		Pointer to the structure device
+ * @max_usb_in_curr:	Max USB charger input current
+ * @vbus_detected:	VBUS detected
+ * @vbus_detected_start:
+ *			VBUS detected during startup
+ * @ac_conn:		This will be true when the AC charger has been plugged
+ * @vddadc_en_ac:	Indicate if VDD ADC supply is enabled because AC
+ *			charger is enabled
+ * @vddadc_en_usb:	Indicate if VDD ADC supply is enabled because USB
+ *			charger is enabled
+ * @vbat		Battery voltage
+ * @old_vbat		Previously measured battery voltage
+ * @autopower		Indicate if we should have automatic pwron after pwrloss
+ * @parent:		Pointer to the struct ab8500
+ * @gpadc:		Pointer to the struct gpadc
+ * @pdata:		Pointer to the abx500_charger platform data
+ * @bat:		Pointer to the abx500_bm platform data
+ * @flags:		Structure for information about events triggered
+ * @usb_state:		Structure for usb stack information
+ * @ac_chg:		AC charger power supply
+ * @usb_chg:		USB charger power supply
+ * @ac:			Structure that holds the AC charger properties
+ * @usb:		Structure that holds the USB charger properties
+ * @regu:		Pointer to the struct regulator
+ * @charger_wq:		Work queue for the IRQs and checking HW state
+ * @check_vbat_work	Work for checking vbat threshold to adjust vbus current
+ * @check_hw_failure_work:	Work for checking HW state
+ * @check_usbchgnotok_work:	Work for checking USB charger not ok status
+ * @kick_wd_work:		Work for kicking the charger watchdog in case
+ *				of ABB rev 1.* due to the watchog logic bug
+ * @ac_work:			Work for checking AC charger connection
+ * @detect_usb_type_work:	Work for detecting the USB type connected
+ * @usb_link_status_work:	Work for checking the new USB link status
+ * @usb_state_changed_work:	Work for checking USB state
+ * @check_main_thermal_prot_work:
+ *				Work for checking Main thermal status
+ * @check_usb_thermal_prot_work:
+ *				Work for checking USB thermal status
+ */
+struct ab8500_charger {
+	struct device *dev;
+	int max_usb_in_curr;
+	bool vbus_detected;
+	bool vbus_detected_start;
+	bool ac_conn;
+	bool vddadc_en_ac;
+	bool vddadc_en_usb;
+	int vbat;
+	int old_vbat;
+	bool autopower;
+	struct ab8500 *parent;
+	struct ab8500_gpadc *gpadc;
+	struct abx500_charger_platform_data *pdata;
+	struct abx500_bm_data *bat;
+	struct ab8500_charger_event_flags flags;
+	struct ab8500_charger_usb_state usb_state;
+	struct ux500_charger ac_chg;
+	struct ux500_charger usb_chg;
+	struct ab8500_charger_info ac;
+	struct ab8500_charger_info usb;
+	struct regulator *regu;
+	struct workqueue_struct *charger_wq;
+	struct delayed_work check_vbat_work;
+	struct delayed_work check_hw_failure_work;
+	struct delayed_work check_usbchgnotok_work;
+	struct delayed_work kick_wd_work;
+	struct work_struct ac_work;
+	struct work_struct detect_usb_type_work;
+	struct work_struct usb_link_status_work;
+	struct work_struct usb_state_changed_work;
+	struct work_struct check_main_thermal_prot_work;
+	struct work_struct check_usb_thermal_prot_work;
+	struct otg_transceiver *otg;
+	struct notifier_block nb;
+};
+
+/* AC properties */
+static enum power_supply_property ab8500_charger_ac_props[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/* USB properties */
+static enum power_supply_property ab8500_charger_usb_props[] = {
+	POWER_SUPPLY_PROP_HEALTH,
+	POWER_SUPPLY_PROP_CURRENT_AVG,
+	POWER_SUPPLY_PROP_PRESENT,
+	POWER_SUPPLY_PROP_ONLINE,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_VOLTAGE_AVG,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+};
+
+/**
+ * ab8500_power_loss_handling - set how we handle powerloss.
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Magic nummbers are from STE HW department.
+ */
+static void ab8500_power_loss_handling(struct ab8500_charger *di)
+{
+	u8 reg;
+	int ret;
+
+	dev_dbg(di->dev, "Autopower : %d\n", di->autopower);
+
+	/* read the autopower register */
+	ret = abx500_get_register_interruptible(di->dev, 0x15, 0x00, &reg);
+	if (ret) {
+		dev_err(di->dev, "%d write failed\n", __LINE__);
+		return;
+	}
+
+	/* enable the OPT emulation registers */
+	ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x2);
+	if (ret) {
+		dev_err(di->dev, "%d write failed\n", __LINE__);
+		return;
+	}
+
+	if (di->autopower)
+		reg |= 0x8;
+	else
+		reg &= ~0x8;
+
+	/* write back the changed value to autopower reg */
+	ret = abx500_set_register_interruptible(di->dev, 0x15, 0x00, reg);
+	if (ret) {
+		dev_err(di->dev, "%d write failed\n", __LINE__);
+		return;
+	}
+
+	/* disable the set OTP registers again */
+	ret = abx500_set_register_interruptible(di->dev, 0x11, 0x00, 0x0);
+	if (ret) {
+		dev_err(di->dev, "%d write failed\n", __LINE__);
+		return;
+	}
+}
+
+/**
+ * ab8500_power_supply_changed - a wrapper with local extentions for
+ * power_supply_changed
+ * @di:	  pointer to the ab8500_charger structure
+ * @psy:  pointer to power_supply_that have changed.
+ *
+ */
+static void ab8500_power_supply_changed(struct ab8500_charger *di,
+					struct power_supply *psy)
+{
+	if (di->pdata->autopower_cfg) {
+		if (!di->usb.charger_connected &&
+		    !di->ac.charger_connected &&
+		    di->autopower) {
+			di->autopower = false;
+			ab8500_power_loss_handling(di);
+		} else if (!di->autopower &&
+			   (di->ac.charger_connected ||
+			    di->usb.charger_connected)) {
+			di->autopower = true;
+			ab8500_power_loss_handling(di);
+		}
+	}
+	power_supply_changed(psy);
+}
+
+static void ab8500_charger_set_usb_connected(struct ab8500_charger *di,
+	bool connected)
+{
+	if (connected != di->usb.charger_connected) {
+		dev_dbg(di->dev, "USB connected:%i\n", connected);
+		di->usb.charger_connected = connected;
+		sysfs_notify(&di->usb_chg.psy.dev->kobj, NULL, "present");
+	}
+}
+
+/**
+ * ab8500_charger_get_ac_voltage() - get ac charger voltage
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger voltage (on success)
+ */
+static int ab8500_charger_get_ac_voltage(struct ab8500_charger *di)
+{
+	int vch;
+
+	/* Only measure voltage if the charger is connected */
+	if (di->ac.charger_connected) {
+		vch = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_V);
+		if (vch < 0)
+			dev_err(di->dev, "%s gpadc conv failed,\n", __func__);
+	} else {
+		vch = 0;
+	}
+	return vch;
+}
+
+/**
+ * ab8500_charger_ac_cv() - check if the main charger is in CV mode
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_ac_cv(struct ab8500_charger *di)
+{
+	u8 val;
+	int ret = 0;
+
+	/* Only check CV mode if the charger is online */
+	if (di->ac.charger_online) {
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_STATUS1_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return 0;
+		}
+
+		if (val & MAIN_CH_CV_ON)
+			ret = 1;
+		else
+			ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_get_vbus_voltage() - get vbus voltage
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the vbus voltage.
+ * Returns vbus voltage (on success)
+ */
+static int ab8500_charger_get_vbus_voltage(struct ab8500_charger *di)
+{
+	int vch;
+
+	/* Only measure voltage if the charger is connected */
+	if (di->usb.charger_connected) {
+		vch = ab8500_gpadc_convert(di->gpadc, VBUS_V);
+		if (vch < 0)
+			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+	} else {
+		vch = 0;
+	}
+	return vch;
+}
+
+/**
+ * ab8500_charger_get_usb_current() - get usb charger current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the usb charger current.
+ * Returns usb current (on success) and error code on failure
+ */
+static int ab8500_charger_get_usb_current(struct ab8500_charger *di)
+{
+	int ich;
+
+	/* Only measure current if the charger is online */
+	if (di->usb.charger_online) {
+		ich = ab8500_gpadc_convert(di->gpadc, USB_CHARGER_C);
+		if (ich < 0)
+			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+	} else {
+		ich = 0;
+	}
+	return ich;
+}
+
+/**
+ * ab8500_charger_get_ac_current() - get ac charger current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * This function returns the ac charger current.
+ * Returns ac current (on success) and error code on failure.
+ */
+static int ab8500_charger_get_ac_current(struct ab8500_charger *di)
+{
+	int ich;
+
+	/* Only measure current if the charger is online */
+	if (di->ac.charger_online) {
+		ich = ab8500_gpadc_convert(di->gpadc, MAIN_CHARGER_C);
+		if (ich < 0)
+			dev_err(di->dev, "%s gpadc conv failed\n", __func__);
+	} else {
+		ich = 0;
+	}
+	return ich;
+}
+
+/**
+ * ab8500_charger_usb_cv() - check if the usb charger is in CV mode
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns ac charger CV mode (on success) else error code
+ */
+static int ab8500_charger_usb_cv(struct ab8500_charger *di)
+{
+	int ret;
+	u8 val;
+
+	/* Only check CV mode if the charger is online */
+	if (di->usb.charger_online) {
+		ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_USBCH_STAT1_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return 0;
+		}
+
+		if (val & USB_CH_CV_ON)
+			ret = 1;
+		else
+			ret = 0;
+	} else {
+		ret = 0;
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_detect_chargers() - Detect the connected chargers
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Returns the type of charger connected.
+ * For USB it will not mean we can actually charge from it
+ * but that there is a USB cable connected that we have to
+ * identify. This is used during startup when we don't get
+ * interrupts of the charger detection
+ *
+ * Returns an integer value, that means,
+ * NO_PW_CONN  no power supply is connected
+ * AC_PW_CONN  if the AC power supply is connected
+ * USB_PW_CONN  if the USB power supply is connected
+ * AC_PW_CONN + USB_PW_CONN if USB and AC power supplies are both connected
+ */
+static int ab8500_charger_detect_chargers(struct ab8500_charger *di)
+{
+	int result = NO_PW_CONN;
+	int ret;
+	u8 val;
+
+	/* Check for AC charger */
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_STATUS1_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+
+	if (val & MAIN_CH_DET)
+		result = AC_PW_CONN;
+
+	/* Check for USB charger */
+	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_USBCH_STAT1_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+
+	if ((val & VBUS_DET_DBNC1) && (val & VBUS_DET_DBNC100))
+		result |= USB_PW_CONN;
+
+	return result;
+}
+
+/**
+ * ab8500_charger_max_usb_curr() - get the max curr for the USB type
+ * @di:			pointer to the ab8500_charger structure
+ * @link_status:	the identified USB type
+ *
+ * Get the maximum current that is allowed to be drawn from the host
+ * based on the USB type.
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_max_usb_curr(struct ab8500_charger *di,
+	enum ab8500_charger_link_status link_status)
+{
+	int ret = 0;
+
+	switch (link_status) {
+	case USB_STAT_STD_HOST_NC:
+	case USB_STAT_STD_HOST_C_NS:
+	case USB_STAT_STD_HOST_C_S:
+		dev_dbg(di->dev, "USB Type - Standard host is "
+			"detected through USB driver\n");
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+		break;
+	case USB_STAT_HOST_CHG_HS_CHIRP:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+		break;
+	case USB_STAT_HOST_CHG_HS:
+	case USB_STAT_ACA_RID_C_HS:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P9;
+		break;
+	case USB_STAT_ACA_RID_A:
+		/*
+		 * Dedicated charger level minus maximum current accessory
+		 * can consume (300mA). Closest level is 1100mA
+		 */
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P1;
+		break;
+	case USB_STAT_ACA_RID_B:
+		/*
+		 * Dedicated charger level minus 120mA (20mA for ACA and
+		 * 100mA for potential accessory). Closest level is 1300mA
+		 */
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P3;
+		break;
+	case USB_STAT_DEDICATED_CHG:
+	case USB_STAT_HOST_CHG_NM:
+	case USB_STAT_ACA_RID_C_HS_CHIRP:
+	case USB_STAT_ACA_RID_C_NM:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_1P5;
+		break;
+	case USB_STAT_RESERVED:
+		/*
+		 * This state is used to indicate that VBUS has dropped below
+		 * the detection level 4 times in a row. This is due to the
+		 * charger output current is set to high making the charger
+		 * voltage collapse. This have to be propagated through to
+		 * chargalg. This is done using the property
+		 * POWER_SUPPLY_PROP_CURRENT_AVG = 1
+		 */
+		di->flags.vbus_collapse = true;
+		dev_dbg(di->dev, "USB Type - USB_STAT_RESERVED "
+			"VBUS has collapsed\n");
+		ret = -1;
+		break;
+	case USB_STAT_HM_IDGND:
+	case USB_STAT_NOT_CONFIGURED:
+	case USB_STAT_NOT_VALID_LINK:
+		dev_err(di->dev, "USB Type - Charging not allowed\n");
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+		ret = -ENXIO;
+		break;
+	default:
+		dev_err(di->dev, "USB Type - Unknown\n");
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+		ret = -ENXIO;
+		break;
+	};
+
+	dev_dbg(di->dev, "USB Type - 0x%02x MaxCurr: %d",
+		link_status, di->max_usb_in_curr);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_read_usb_type() - read the type of usb connected
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_read_usb_type(struct ab8500_charger *di)
+{
+	int ret;
+	u8 val;
+
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+	ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+		AB8500_USB_LINE_STAT_REG, &val);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return ret;
+	}
+
+	/* get the USB type */
+	val = (val & AB8500_USB_LINK_STATUS) >> 3;
+	ret = ab8500_charger_max_usb_curr(di,
+		(enum ab8500_charger_link_status) val);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_detect_usb_type() - get the type of usb connected
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Detect the type of the plugged USB
+ * Returns error code in case of failure else 0 on success
+ */
+static int ab8500_charger_detect_usb_type(struct ab8500_charger *di)
+{
+	int i, ret;
+	u8 val;
+
+	/*
+	 * On getting the VBUS rising edge detect interrupt there
+	 * is a 250ms delay after which the register UsbLineStatus
+	 * is filled with valid data.
+	 */
+	for (i = 0; i < 10; i++) {
+		msleep(250);
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_INTERRUPT, AB8500_IT_SOURCE21_REG,
+			&val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return ret;
+		}
+		ret = abx500_get_register_interruptible(di->dev, AB8500_USB,
+			AB8500_USB_LINE_STAT_REG, &val);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return ret;
+		}
+		/*
+		 * Until the IT source register is read the UsbLineStatus
+		 * register is not updated, hence doing the same
+		 * Revisit this:
+		 */
+
+		/* get the USB type */
+		val = (val & AB8500_USB_LINK_STATUS) >> 3;
+		if (val)
+			break;
+	}
+	ret = ab8500_charger_max_usb_curr(di,
+		(enum ab8500_charger_link_status) val);
+
+	return ret;
+}
+
+/*
+ * This array maps the raw hex value to charger voltage used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_voltage_map[] = {
+	3500 ,
+	3525 ,
+	3550 ,
+	3575 ,
+	3600 ,
+	3625 ,
+	3650 ,
+	3675 ,
+	3700 ,
+	3725 ,
+	3750 ,
+	3775 ,
+	3800 ,
+	3825 ,
+	3850 ,
+	3875 ,
+	3900 ,
+	3925 ,
+	3950 ,
+	3975 ,
+	4000 ,
+	4025 ,
+	4050 ,
+	4060 ,
+	4070 ,
+	4080 ,
+	4090 ,
+	4100 ,
+	4110 ,
+	4120 ,
+	4130 ,
+	4140 ,
+	4150 ,
+	4160 ,
+	4170 ,
+	4180 ,
+	4190 ,
+	4200 ,
+	4210 ,
+	4220 ,
+	4230 ,
+	4240 ,
+	4250 ,
+	4260 ,
+	4270 ,
+	4280 ,
+	4290 ,
+	4300 ,
+	4310 ,
+	4320 ,
+	4330 ,
+	4340 ,
+	4350 ,
+	4360 ,
+	4370 ,
+	4380 ,
+	4390 ,
+	4400 ,
+	4410 ,
+	4420 ,
+	4430 ,
+	4440 ,
+	4450 ,
+	4460 ,
+	4470 ,
+	4480 ,
+	4490 ,
+	4500 ,
+	4510 ,
+	4520 ,
+	4530 ,
+	4540 ,
+	4550 ,
+	4560 ,
+	4570 ,
+	4580 ,
+	4590 ,
+	4600 ,
+};
+
+/*
+ * This array maps the raw hex value to charger current used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_current_map[] = {
+	100 ,
+	200 ,
+	300 ,
+	400 ,
+	500 ,
+	600 ,
+	700 ,
+	800 ,
+	900 ,
+	1000 ,
+	1100 ,
+	1200 ,
+	1300 ,
+	1400 ,
+	1500 ,
+};
+
+/*
+ * This array maps the raw hex value to VBUS input current used by the AB8500
+ * Values taken from the UM0836
+ */
+static int ab8500_charger_vbus_in_curr_map[] = {
+	USB_CH_IP_CUR_LVL_0P05,
+	USB_CH_IP_CUR_LVL_0P09,
+	USB_CH_IP_CUR_LVL_0P19,
+	USB_CH_IP_CUR_LVL_0P29,
+	USB_CH_IP_CUR_LVL_0P38,
+	USB_CH_IP_CUR_LVL_0P45,
+	USB_CH_IP_CUR_LVL_0P5,
+	USB_CH_IP_CUR_LVL_0P6,
+	USB_CH_IP_CUR_LVL_0P7,
+	USB_CH_IP_CUR_LVL_0P8,
+	USB_CH_IP_CUR_LVL_0P9,
+	USB_CH_IP_CUR_LVL_1P0,
+	USB_CH_IP_CUR_LVL_1P1,
+	USB_CH_IP_CUR_LVL_1P3,
+	USB_CH_IP_CUR_LVL_1P4,
+	USB_CH_IP_CUR_LVL_1P5,
+};
+
+static int ab8500_voltage_to_regval(int voltage)
+{
+	int i;
+
+	/* Special case for voltage below 3.5V */
+	if (voltage < ab8500_charger_voltage_map[0])
+		return LOW_VOLT_REG;
+
+	for (i = 1; i < ARRAY_SIZE(ab8500_charger_voltage_map); i++) {
+		if (voltage < ab8500_charger_voltage_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i = ARRAY_SIZE(ab8500_charger_voltage_map) - 1;
+	if (voltage == ab8500_charger_voltage_map[i])
+		return i;
+	else
+		return -1;
+}
+
+static int ab8500_current_to_regval(int curr)
+{
+	int i;
+
+	if (curr < ab8500_charger_current_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_current_map); i++) {
+		if (curr < ab8500_charger_current_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i = ARRAY_SIZE(ab8500_charger_current_map) - 1;
+	if (curr == ab8500_charger_current_map[i])
+		return i;
+	else
+		return -1;
+}
+
+static int ab8500_vbus_in_curr_to_regval(int curr)
+{
+	int i;
+
+	if (curr < ab8500_charger_vbus_in_curr_map[0])
+		return 0;
+
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_vbus_in_curr_map); i++) {
+		if (curr < ab8500_charger_vbus_in_curr_map[i])
+			return i - 1;
+	}
+
+	/* If not last element, return error */
+	i = ARRAY_SIZE(ab8500_charger_vbus_in_curr_map) - 1;
+	if (curr == ab8500_charger_vbus_in_curr_map[i])
+		return i;
+	else
+		return -1;
+}
+
+/**
+ * ab8500_charger_get_usb_cur() - get usb current
+ * @di:		pointer to the ab8500_charger structre
+ *
+ * The usb stack provides the maximum current that can be drawn from
+ * the standard usb host. This will be in mA.
+ * This function converts current in mA to a value that can be written
+ * to the register. Returns -1 if charging is not allowed
+ */
+static int ab8500_charger_get_usb_cur(struct ab8500_charger *di)
+{
+	switch (di->usb_state.usb_current) {
+	case 100:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P09;
+		break;
+	case 200:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P19;
+		break;
+	case 300:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P29;
+		break;
+	case 400:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P38;
+		break;
+	case 500:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P5;
+		break;
+	default:
+		di->max_usb_in_curr = USB_CH_IP_CUR_LVL_0P05;
+		return -1;
+		break;
+	};
+	return 0;
+}
+
+/**
+ * ab8500_charger_set_vbus_in_curr() - set VBUS input current limit
+ * @di:		pointer to the ab8500_charger structure
+ * @ich_in:	charger input current limit
+ *
+ * Sets the current that can be drawn from the USB host
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_set_vbus_in_curr(struct ab8500_charger *di,
+		int ich_in)
+{
+	int ret;
+	int input_curr_index;
+	int min_value;
+
+	/* We should always use to lowest current limit */
+	min_value = min(di->bat->chg_params->usb_curr_max, ich_in);
+
+	switch (min_value) {
+	case 100:
+		if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+			min_value = USB_CH_IP_CUR_LVL_0P05;
+		break;
+	case 500:
+		if (di->vbat < VBAT_TRESH_IP_CUR_RED)
+			min_value = USB_CH_IP_CUR_LVL_0P45;
+		break;
+	default:
+		break;
+	}
+
+	input_curr_index = ab8500_vbus_in_curr_to_regval(min_value);
+	if (input_curr_index < 0) {
+		dev_err(di->dev, "VBUS input current limit too high\n");
+		return -ENXIO;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_USBCH_IPT_CRNTLVL_REG,
+		input_curr_index << VBUS_IN_CURR_LIM_SHIFT);
+	if (ret)
+		dev_err(di->dev, "%s write failed\n", __func__);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_led_en() - turn on/off chargign led
+ * @di:		pointer to the ab8500_charger structure
+ * @on:		flag to turn on/off the chargign led
+ *
+ * Power ON/OFF charging LED indication
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_led_en(struct ab8500_charger *di, int on)
+{
+	int ret;
+
+	if (on) {
+		/* Power ON charging LED indicator, set LED current to 5mA */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_CTRL,
+			(LED_IND_CUR_5MA | LED_INDICATOR_PWM_ENA));
+		if (ret) {
+			dev_err(di->dev, "Power ON LED failed\n");
+			return ret;
+		}
+		/* LED indicator PWM duty cycle 252/256 */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_DUTY,
+			LED_INDICATOR_PWM_DUTY_252_256);
+		if (ret) {
+			dev_err(di->dev, "Set LED PWM duty cycle failed\n");
+			return ret;
+		}
+	} else {
+		/* Power off charging LED indicator */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_LED_INDICATOR_PWM_CTRL,
+			LED_INDICATOR_PWM_DIS);
+		if (ret) {
+			dev_err(di->dev, "Power-off LED failed\n");
+			return ret;
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_ac_en() - enable or disable ac charging
+ * @di:		pointer to the ab8500_charger structure
+ * @enable:	enable/disable flag
+ * @vset:	charging voltage
+ * @iset:	charging current
+ *
+ * Enable/Disable AC/Mains charging and turns on/off the charging led
+ * respectively.
+ **/
+static int ab8500_charger_ac_en(struct ux500_charger *charger,
+	int enable, int vset, int iset)
+{
+	int ret;
+	int volt_index;
+	int curr_index;
+	int input_curr_index;
+	u8 overshoot = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_ac_device_info(charger);
+
+	if (enable) {
+		/* Check if AC is connected */
+		if (!di->ac.charger_connected) {
+			dev_err(di->dev, "AC charger not connected\n");
+			return -ENXIO;
+		}
+
+		/* Enable AC charging */
+		dev_dbg(di->dev, "Enable AC: %dmV %dmA\n", vset, iset);
+
+		/*
+		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+		 * will be triggered everytime we enable the VDD ADC supply.
+		 * This will turn off charging for a short while.
+		 * It can be avoided by having the supply on when
+		 * there is a charger enabled. Normally the VDD ADC supply
+		 * is enabled everytime a GPADC conversion is triggered. We will
+		 * force it to be enabled from this driver to have
+		 * the GPADC module independant of the AB8500 chargers
+		 */
+		if (!di->vddadc_en_ac) {
+			regulator_enable(di->regu);
+			di->vddadc_en_ac = true;
+		}
+
+		/* Check if the requested voltage or current is valid */
+		volt_index = ab8500_voltage_to_regval(vset);
+		curr_index = ab8500_current_to_regval(iset);
+		input_curr_index = ab8500_current_to_regval(
+			di->bat->chg_params->ac_curr_max);
+		if (volt_index < 0 || curr_index < 0 || input_curr_index < 0) {
+			dev_err(di->dev,
+				"Charger voltage or current too high, "
+				"charging not started\n");
+			return -ENXIO;
+		}
+
+		/* ChVoltLevel: maximum battery charging voltage */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* MainChInputCurr: current that can be drawn from the charger*/
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_MCH_IPT_CURLVL_REG,
+			input_curr_index << MAIN_CH_INPUT_CURR_SHIFT);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* ChOutputCurentLevel: protected output current */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+
+		/* Check if VBAT overshoot control should be enabled */
+		if (!di->bat->enable_overshoot)
+			overshoot = MAIN_CH_NO_OVERSHOOT_ENA_N;
+
+		/* Enable Main Charger */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_MCH_CTRL1, MAIN_CH_ENA | overshoot);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+
+		/* Power on charging LED indication */
+		ret = ab8500_charger_led_en(di, true);
+		if (ret < 0)
+			dev_err(di->dev, "failed to enable LED\n");
+
+		di->ac.charger_online = 1;
+	} else {
+		/* Disable AC charging */
+		if (is_ab8500_1p1_or_earlier(di->parent)) {
+			/*
+			 * For ABB revision 1.0 and 1.1 there is a bug in the
+			 * watchdog logic. That means we have to continously
+			 * kick the charger watchdog even when no charger is
+			 * connected. This is only valid once the AC charger
+			 * has been enabled. This is a bug that is not handled
+			 * by the algorithm and the watchdog have to be kicked
+			 * by the charger driver when the AC charger
+			 * is disabled
+			 */
+			if (di->ac_conn) {
+				queue_delayed_work(di->charger_wq,
+					&di->kick_wd_work,
+					round_jiffies(WD_KICK_INTERVAL));
+			}
+
+			/*
+			 * We can't turn off charging completely
+			 * due to a bug in AB8500 cut1.
+			 * If we do, charging will not start again.
+			 * That is why we set the lowest voltage
+			 * and current possible
+			 */
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER,
+				AB8500_CH_VOLT_LVL_REG, CH_VOL_LVL_3P5);
+			if (ret) {
+				dev_err(di->dev,
+					"%s write failed\n", __func__);
+				return ret;
+			}
+
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER,
+				AB8500_CH_OPT_CRNTLVL_REG, CH_OP_CUR_LVL_0P1);
+			if (ret) {
+				dev_err(di->dev,
+					"%s write failed\n", __func__);
+				return ret;
+			}
+		} else {
+			ret = abx500_set_register_interruptible(di->dev,
+				AB8500_CHARGER,
+				AB8500_MCH_CTRL1, 0);
+			if (ret) {
+				dev_err(di->dev,
+					"%s write failed\n", __func__);
+				return ret;
+			}
+		}
+
+		ret = ab8500_charger_led_en(di, false);
+		if (ret < 0)
+			dev_err(di->dev, "failed to disable LED\n");
+
+		di->ac.charger_online = 0;
+		di->ac.wd_expired = false;
+
+		/* Disable regulator if enabled */
+		if (di->vddadc_en_ac) {
+			regulator_disable(di->regu);
+			di->vddadc_en_ac = false;
+		}
+
+		dev_dbg(di->dev, "%s Disabled AC charging\n", __func__);
+	}
+	ab8500_power_supply_changed(di, &di->ac_chg.psy);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_usb_en() - enable usb charging
+ * @di:		pointer to the ab8500_charger structure
+ * @enable:	enable/disable flag
+ * @vset:	charging voltage
+ * @ich_out:	charger output current
+ *
+ * Enable/Disable USB charging and turns on/off the charging led respectively.
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_en(struct ux500_charger *charger,
+	int enable, int vset, int ich_out)
+{
+	int ret;
+	int volt_index;
+	int curr_index;
+	u8 overshoot = 0;
+
+	struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
+
+	if (enable) {
+		/* Check if USB is connected */
+		if (!di->usb.charger_connected) {
+			dev_err(di->dev, "USB charger not connected\n");
+			return -ENXIO;
+		}
+
+		/*
+		 * Due to a bug in AB8500, BTEMP_HIGH/LOW interrupts
+		 * will be triggered everytime we enable the VDD ADC supply.
+		 * This will turn off charging for a short while.
+		 * It can be avoided by having the supply on when
+		 * there is a charger enabled. Normally the VDD ADC supply
+		 * is enabled everytime a GPADC conversion is triggered. We will
+		 * force it to be enabled from this driver to have
+		 * the GPADC module independant of the AB8500 chargers
+		 */
+		if (!di->vddadc_en_usb) {
+			regulator_enable(di->regu);
+			di->vddadc_en_usb = true;
+		}
+
+		/* Enable USB charging */
+		dev_dbg(di->dev, "Enable USB: %dmV %dmA\n", vset, ich_out);
+
+		/* Check if the requested voltage or current is valid */
+		volt_index = ab8500_voltage_to_regval(vset);
+		curr_index = ab8500_current_to_regval(ich_out);
+		if (volt_index < 0 || curr_index < 0) {
+			dev_err(di->dev,
+				"Charger voltage or current too high, "
+				"charging not started\n");
+			return -ENXIO;
+		}
+
+		/* ChVoltLevel: max voltage upto which battery can be charged */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_REG, (u8) volt_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* USBChInputCurr: current that can be drawn from the usb */
+		ret = ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		if (ret) {
+			dev_err(di->dev, "setting USBChInputCurr failed\n");
+			return ret;
+		}
+		/* ChOutputCurentLevel: protected output current */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+		/* Check if VBAT overshoot control should be enabled */
+		if (!di->bat->enable_overshoot)
+			overshoot = USB_CHG_NO_OVERSHOOT_ENA_N;
+
+		/* Enable USB Charger */
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_USBCH_CTRL1_REG, USB_CH_ENA | overshoot);
+		if (ret) {
+			dev_err(di->dev, "%s write failed\n", __func__);
+			return ret;
+		}
+
+		/* If success power on charging LED indication */
+		ret = ab8500_charger_led_en(di, true);
+		if (ret < 0)
+			dev_err(di->dev, "failed to enable LED\n");
+
+		queue_delayed_work(di->charger_wq, &di->check_vbat_work, HZ);
+
+		di->usb.charger_online = 1;
+	} else {
+		/* Disable USB charging */
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_USBCH_CTRL1_REG, 0);
+		if (ret) {
+			dev_err(di->dev,
+				"%s write failed\n", __func__);
+			return ret;
+		}
+
+		ret = ab8500_charger_led_en(di, false);
+		if (ret < 0)
+			dev_err(di->dev, "failed to disable LED\n");
+
+		di->usb.charger_online = 0;
+		di->usb.wd_expired = false;
+
+		/* Disable regulator if enabled */
+		if (di->vddadc_en_usb) {
+			regulator_disable(di->regu);
+			di->vddadc_en_usb = false;
+		}
+
+		dev_dbg(di->dev, "%s Disabled USB charging\n", __func__);
+
+		/* Cancel any pending Vbat check work */
+		if (delayed_work_pending(&di->check_vbat_work))
+			cancel_delayed_work(&di->check_vbat_work);
+
+	}
+	ab8500_power_supply_changed(di, &di->usb_chg.psy);
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_watchdog_kick() - kick charger watchdog
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Kick charger watchdog
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_watchdog_kick(struct ux500_charger *charger)
+{
+	int ret;
+	struct ab8500_charger *di;
+
+	if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+		di = to_ab8500_charger_ac_device_info(charger);
+	else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+	if (ret)
+		dev_err(di->dev, "Failed to kick WD!\n");
+
+	return ret;
+}
+
+/**
+ * ab8500_charger_update_charger_current() - update charger current
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Update the charger output current for the specified charger
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_update_charger_current(struct ux500_charger *charger,
+		int ich_out)
+{
+	int ret;
+	int curr_index;
+	struct ab8500_charger *di;
+
+	if (charger->psy.type == POWER_SUPPLY_TYPE_MAINS)
+		di = to_ab8500_charger_ac_device_info(charger);
+	else if (charger->psy.type == POWER_SUPPLY_TYPE_USB)
+		di = to_ab8500_charger_usb_device_info(charger);
+	else
+		return -ENXIO;
+
+	curr_index = ab8500_current_to_regval(ich_out);
+	if (curr_index < 0) {
+		dev_err(di->dev,
+			"Charger current too high, "
+			"charging not started\n");
+		return -ENXIO;
+	}
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_OPT_CRNTLVL_REG, (u8) curr_index);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		return ret;
+	}
+
+	/* Reset the main and usb drop input current measurement counter */
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+				AB8500_CHARGER_CTRL,
+				0x1);
+	if (ret) {
+		dev_err(di->dev, "%s write failed\n", __func__);
+		return ret;
+	}
+
+	return ret;
+}
+
+static int ab8500_charger_get_ext_psy_data(struct device *dev, void *data)
+{
+	struct power_supply *psy;
+	struct power_supply *ext;
+	struct ab8500_charger *di;
+	union power_supply_propval ret;
+	int i, j;
+	bool psy_found = false;
+	struct ux500_charger *usb_chg;
+
+	usb_chg = (struct ux500_charger *)data;
+	psy = &usb_chg->psy;
+
+	di = to_ab8500_charger_usb_device_info(usb_chg);
+
+	ext = dev_get_drvdata(dev);
+
+	/* For all psy where the driver name appears in any supplied_to */
+	for (i = 0; i < ext->num_supplicants; i++) {
+		if (!strcmp(ext->supplied_to[i], psy->name))
+			psy_found = true;
+	}
+
+	if (!psy_found)
+		return 0;
+
+	/* Go through all properties for the psy */
+	for (j = 0; j < ext->num_properties; j++) {
+		enum power_supply_property prop;
+		prop = ext->properties[j];
+
+		if (ext->get_property(ext, prop, &ret))
+			continue;
+
+		switch (prop) {
+		case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+			switch (ext->type) {
+			case POWER_SUPPLY_TYPE_BATTERY:
+				di->vbat = ret.intval / 1000;
+				break;
+			default:
+				break;
+			}
+			break;
+		default:
+			break;
+		}
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_check_vbat_work() - keep vbus current within spec
+ * @work	pointer to the work_struct structure
+ *
+ * Due to a asic bug it is necessary to lower the input current to the vbus
+ * charger when charging with at some specific levels. This issue is only valid
+ * for below a certain battery voltage. This function makes sure that the
+ * the allowed current limit isn't exceeded.
+ */
+static void ab8500_charger_check_vbat_work(struct work_struct *work)
+{
+	int t = 10;
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_vbat_work.work);
+
+	class_for_each_device(power_supply_class, NULL,
+		&di->usb_chg.psy, ab8500_charger_get_ext_psy_data);
+
+	/* First run old_vbat is 0. */
+	if (di->old_vbat == 0)
+		di->old_vbat = di->vbat;
+
+	if (!((di->old_vbat <= VBAT_TRESH_IP_CUR_RED &&
+		di->vbat <= VBAT_TRESH_IP_CUR_RED) ||
+		(di->old_vbat > VBAT_TRESH_IP_CUR_RED &&
+		di->vbat > VBAT_TRESH_IP_CUR_RED))) {
+
+		dev_dbg(di->dev, "Vbat did cross threshold, curr: %d, new: %d,"
+			" old: %d\n", di->max_usb_in_curr, di->vbat,
+			di->old_vbat);
+		ab8500_charger_set_vbus_in_curr(di, di->max_usb_in_curr);
+		power_supply_changed(&di->usb_chg.psy);
+	}
+
+	di->old_vbat = di->vbat;
+
+	/*
+	 * No need to check the battery voltage every second when not close to
+	 * the threshold.
+	 */
+	if (di->vbat < (VBAT_TRESH_IP_CUR_RED + 100) &&
+		(di->vbat > (VBAT_TRESH_IP_CUR_RED - 100)))
+			t = 1;
+
+	queue_delayed_work(di->charger_wq, &di->check_vbat_work, t * HZ);
+}
+
+/**
+ * ab8500_charger_check_hw_failure_work() - check main charger failure
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_check_hw_failure_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_hw_failure_work.work);
+
+	/* Check if the status bits for HW failure is still active */
+	if (di->flags.mainextchnotok) {
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return;
+		}
+		if (!(reg_value & MAIN_CH_NOK)) {
+			di->flags.mainextchnotok = false;
+			ab8500_power_supply_changed(di, &di->ac_chg.psy);
+		}
+	}
+	if (di->flags.vbus_ovv) {
+		ret = abx500_get_register_interruptible(di->dev,
+			AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG,
+			&reg_value);
+		if (ret < 0) {
+			dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+			return;
+		}
+		if (!(reg_value & VBUS_OVV_TH)) {
+			di->flags.vbus_ovv = false;
+			ab8500_power_supply_changed(di, &di->usb_chg.psy);
+		}
+	}
+	/* If we still have a failure, schedule a new check */
+	if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+		queue_delayed_work(di->charger_wq,
+			&di->check_hw_failure_work, round_jiffies(HZ));
+	}
+}
+
+/**
+ * ab8500_charger_kick_watchdog_work() - kick the watchdog
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for kicking the charger watchdog.
+ *
+ * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+ * logic. That means we have to continously kick the charger
+ * watchdog even when no charger is connected. This is only
+ * valid once the AC charger has been enabled. This is
+ * a bug that is not handled by the algorithm and the
+ * watchdog have to be kicked by the charger driver
+ * when the AC charger is disabled
+ */
+static void ab8500_charger_kick_watchdog_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, kick_wd_work.work);
+
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+	if (ret)
+		dev_err(di->dev, "Failed to kick WD!\n");
+
+	/* Schedule a new watchdog kick */
+	queue_delayed_work(di->charger_wq,
+		&di->kick_wd_work, round_jiffies(WD_KICK_INTERVAL));
+}
+
+/**
+ * ab8500_charger_ac_work() - work to get and set main charger status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the main charger status
+ */
+static void ab8500_charger_ac_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, ac_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if the main charger is
+	 * connected by reading the status register
+	 */
+	ret = ab8500_charger_detect_chargers(di);
+	if (ret < 0)
+		return;
+
+	if (ret & AC_PW_CONN) {
+		di->ac.charger_connected = 1;
+		di->ac_conn = true;
+	} else {
+		di->ac.charger_connected = 0;
+	}
+
+	ab8500_power_supply_changed(di, &di->ac_chg.psy);
+	sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
+}
+
+/**
+ * ab8500_charger_detect_usb_type_work() - work to detect USB type
+ * @work:	Pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+void ab8500_charger_detect_usb_type_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, detect_usb_type_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if is
+	 * connected by reading the status register
+	 */
+	ret = ab8500_charger_detect_chargers(di);
+	if (ret < 0)
+		return;
+
+	if (!(ret & USB_PW_CONN)) {
+		di->vbus_detected = 0;
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
+	} else {
+		di->vbus_detected = 1;
+
+		if (is_ab8500_1p1_or_earlier(di->parent)) {
+			ret = ab8500_charger_detect_usb_type(di);
+			if (!ret) {
+				ab8500_charger_set_usb_connected(di, true);
+				ab8500_power_supply_changed(di,
+							    &di->usb_chg.psy);
+			}
+		} else {
+			/* For ABB cut2.0 and onwards we have an IRQ,
+			 * USB_LINK_STATUS that will be triggered when the USB
+			 * link status changes. The exception is USB connected
+			 * during startup. Then we don't get a
+			 * USB_LINK_STATUS IRQ
+			 */
+			if (di->vbus_detected_start) {
+				di->vbus_detected_start = false;
+				ret = ab8500_charger_detect_usb_type(di);
+				if (!ret) {
+					ab8500_charger_set_usb_connected(di,
+						true);
+					ab8500_power_supply_changed(di,
+						&di->usb_chg.psy);
+				}
+			}
+		}
+	}
+}
+
+/**
+ * ab8500_charger_usb_link_status_work() - work to detect USB type
+ * @work:	pointer to the work_struct structure
+ *
+ * Detect the type of USB plugged
+ */
+static void ab8500_charger_usb_link_status_work(struct work_struct *work)
+{
+	int ret;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, usb_link_status_work);
+
+	/*
+	 * Since we can't be sure that the events are received
+	 * synchronously, we have the check if  is
+	 * connected by reading the status register
+	 */
+	ret = ab8500_charger_detect_chargers(di);
+	if (ret < 0)
+		return;
+
+	if (!(ret & USB_PW_CONN)) {
+		di->vbus_detected = 0;
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
+	} else {
+		di->vbus_detected = 1;
+		ret = ab8500_charger_read_usb_type(di);
+		if (!ret) {
+			/* Update maximum input current */
+			ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr);
+			if (ret)
+				return;
+
+			ab8500_charger_set_usb_connected(di, true);
+			ab8500_power_supply_changed(di, &di->usb_chg.psy);
+		} else if (ret == -ENXIO) {
+			/* No valid charger type detected */
+			ab8500_charger_set_usb_connected(di, false);
+			ab8500_power_supply_changed(di, &di->usb_chg.psy);
+		}
+	}
+}
+
+static void ab8500_charger_usb_state_changed_work(struct work_struct *work)
+{
+	int ret;
+	unsigned long flags;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, usb_state_changed_work);
+
+	if (!di->vbus_detected)
+		return;
+
+	spin_lock_irqsave(&di->usb_state.usb_lock, flags);
+	di->usb_state.usb_changed = false;
+	spin_unlock_irqrestore(&di->usb_state.usb_lock, flags);
+
+	/*
+	 * wait for some time until you get updates from the usb stack
+	 * and negotiations are completed
+	 */
+	msleep(250);
+
+	if (di->usb_state.usb_changed)
+		return;
+
+	dev_dbg(di->dev, "%s USB state: 0x%02x mA: %d\n",
+		__func__, di->usb_state.state, di->usb_state.usb_current);
+
+	switch (di->usb_state.state) {
+	case AB8500_BM_USB_STATE_RESET_HS:
+	case AB8500_BM_USB_STATE_RESET_FS:
+	case AB8500_BM_USB_STATE_SUSPEND:
+	case AB8500_BM_USB_STATE_MAX:
+		ab8500_charger_set_usb_connected(di, false);
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
+		break;
+
+	case AB8500_BM_USB_STATE_RESUME:
+		/*
+		 * when suspend->resume there should be delay
+		 * of 1sec for enabling charging
+		 */
+		msleep(1000);
+		/* Intentional fall through */
+	case AB8500_BM_USB_STATE_CONFIGURED:
+		/*
+		 * USB is configured, enable charging with the charging
+		 * input current obtained from USB driver
+		 */
+		if (!ab8500_charger_get_usb_cur(di)) {
+			/* Update maximum input current */
+			ret = ab8500_charger_set_vbus_in_curr(di,
+					di->max_usb_in_curr);
+			if (ret)
+				return;
+
+			ab8500_charger_set_usb_connected(di, true);
+			ab8500_power_supply_changed(di, &di->usb_chg.psy);
+		}
+		break;
+
+	default:
+		break;
+	};
+}
+
+/**
+ * ab8500_charger_check_usbchargernotok_work() - check USB chg not ok status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB charger Not OK status
+ */
+static void ab8500_charger_check_usbchargernotok_work(struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+	bool prev_status;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_usbchgnotok_work.work);
+
+	/* Check if the status bit for usbchargernotok is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	prev_status = di->flags.usbchargernotok;
+
+	if (reg_value & VBUS_CH_NOK) {
+		di->flags.usbchargernotok = true;
+		/* Check again in 1sec */
+		queue_delayed_work(di->charger_wq,
+			&di->check_usbchgnotok_work, HZ);
+	} else {
+		di->flags.usbchargernotok = false;
+		di->flags.vbus_collapse = false;
+	}
+
+	if (prev_status != di->flags.usbchargernotok)
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_main_thermal_prot_work() - check main thermal status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the Main thermal prot status
+ */
+static void ab8500_charger_check_main_thermal_prot_work(
+	struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_main_thermal_prot_work);
+
+	/* Check if the status bit for main_thermal_prot is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_STATUS2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if (reg_value & MAIN_CH_TH_PROT)
+		di->flags.main_thermal_prot = true;
+	else
+		di->flags.main_thermal_prot = false;
+
+	ab8500_power_supply_changed(di, &di->ac_chg.psy);
+}
+
+/**
+ * ab8500_charger_check_usb_thermal_prot_work() - check usb thermal status
+ * @work:	pointer to the work_struct structure
+ *
+ * Work queue function for checking the USB thermal prot status
+ */
+static void ab8500_charger_check_usb_thermal_prot_work(
+	struct work_struct *work)
+{
+	int ret;
+	u8 reg_value;
+
+	struct ab8500_charger *di = container_of(work,
+		struct ab8500_charger, check_usb_thermal_prot_work);
+
+	/* Check if the status bit for usb_thermal_prot is still active */
+	ret = abx500_get_register_interruptible(di->dev,
+		AB8500_CHARGER, AB8500_CH_USBCH_STAT2_REG, &reg_value);
+	if (ret < 0) {
+		dev_err(di->dev, "%s ab8500 read failed\n", __func__);
+		return;
+	}
+	if (reg_value & USB_CH_TH_PROT)
+		di->flags.usb_thermal_prot = true;
+	else
+		di->flags.usb_thermal_prot = false;
+
+	ab8500_power_supply_changed(di, &di->usb_chg.psy);
+}
+
+/**
+ * ab8500_charger_mainchunplugdet_handler() - main charger unplugged
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchunplugdet_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger unplugged\n");
+	queue_work(di->charger_wq, &di->ac_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchplugdet_handler() - main charger plugged
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchplugdet_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger plugged\n");
+	queue_work(di->charger_wq, &di->ac_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainextchnotok_handler() - main charger not ok
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainextchnotok_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Main charger not ok\n");
+	di->flags.mainextchnotok = true;
+	ab8500_power_supply_changed(di, &di->ac_chg.psy);
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotr_handler() - Die temp is above main charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp above Main charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_mainchthprotf_handler() - Die temp is below main charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_mainchthprotf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp ok for Main charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_main_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetf_handler() - VBUS falling detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "VBUS falling detected\n");
+	queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusdetr_handler() - VBUS rising detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusdetr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	di->vbus_detected = true;
+	dev_dbg(di->dev, "VBUS rising detected\n");
+	queue_work(di->charger_wq, &di->detect_usb_type_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usblinkstatus_handler() - USB link status has changed
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usblinkstatus_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "USB link status changed\n");
+
+	queue_work(di->charger_wq, &di->usb_link_status_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotr_handler() - Die temp is above usb charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp above USB charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchthprotf_handler() - Die temp is below usb charger
+ * thermal protection threshold
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchthprotf_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev,
+		"Die temp ok for USB charger thermal protection threshold\n");
+	queue_work(di->charger_wq, &di->check_usb_thermal_prot_work);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_usbchargernotokr_handler() - USB charger not ok detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_usbchargernotokr_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Not allowed USB charger detected\n");
+	queue_delayed_work(di->charger_wq, &di->check_usbchgnotok_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_chwdexp_handler() - Charger watchdog expired
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_chwdexp_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "Charger watchdog expired\n");
+
+	/*
+	 * The charger that was online when the watchdog expired
+	 * needs to be restarted for charging to start again
+	 */
+	if (di->ac.charger_online) {
+		di->ac.wd_expired = true;
+		ab8500_power_supply_changed(di, &di->ac_chg.psy);
+	}
+	if (di->usb.charger_online) {
+		di->usb.wd_expired = true;
+		ab8500_power_supply_changed(di, &di->usb_chg.psy);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_vbusovv_handler() - VBUS overvoltage detected
+ * @irq:       interrupt number
+ * @_di:       pointer to the ab8500_charger structure
+ *
+ * Returns IRQ status(IRQ_HANDLED)
+ */
+static irqreturn_t ab8500_charger_vbusovv_handler(int irq, void *_di)
+{
+	struct ab8500_charger *di = _di;
+
+	dev_dbg(di->dev, "VBUS overvoltage detected\n");
+	di->flags.vbus_ovv = true;
+	ab8500_power_supply_changed(di, &di->usb_chg.psy);
+
+	/* Schedule a new HW failure check */
+	queue_delayed_work(di->charger_wq, &di->check_hw_failure_work, 0);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * ab8500_charger_ac_get_property() - get the ac/mains properties
+ * @psy:       pointer to the power_supply structure
+ * @psp:       pointer to the power_supply_property structure
+ * @val:       pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the ac/mains
+ * properties by reading the sysfs files.
+ * AC/Mains properties are online, present and voltage.
+ * online:     ac/mains charging is in progress or not
+ * present:    presence of the ac/mains
+ * voltage:    AC/Mains voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_ac_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_charger *di;
+
+	di = to_ab8500_charger_ac_device_info(psy_to_ux500_charger(psy));
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->flags.mainextchnotok)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (di->ac.wd_expired || di->usb.wd_expired)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (di->flags.main_thermal_prot)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = di->ac.charger_online;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = di->ac.charger_connected;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		di->ac.charger_voltage = ab8500_charger_get_ac_voltage(di);
+		val->intval = di->ac.charger_voltage * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to indicate when CV mode is entered
+		 * for the AC charger
+		 */
+		di->ac.cv_active = ab8500_charger_ac_cv(di);
+		val->intval = di->ac.cv_active;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = ab8500_charger_get_ac_current(di) * 1000;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_usb_get_property() - get the usb properties
+ * @psy:        pointer to the power_supply structure
+ * @psp:        pointer to the power_supply_property structure
+ * @val:        pointer to the power_supply_propval union
+ *
+ * This function gets called when an application tries to get the usb
+ * properties by reading the sysfs files.
+ * USB properties are online, present and voltage.
+ * online:     usb charging is in progress or not
+ * present:    presence of the usb
+ * voltage:    vbus voltage
+ * Returns error code in case of failure else 0(on success)
+ */
+static int ab8500_charger_usb_get_property(struct power_supply *psy,
+	enum power_supply_property psp,
+	union power_supply_propval *val)
+{
+	struct ab8500_charger *di;
+
+	di = to_ab8500_charger_usb_device_info(psy_to_ux500_charger(psy));
+
+	switch (psp) {
+	case POWER_SUPPLY_PROP_HEALTH:
+		if (di->flags.usbchargernotok)
+			val->intval = POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+		else if (di->ac.wd_expired || di->usb.wd_expired)
+			val->intval = POWER_SUPPLY_HEALTH_DEAD;
+		else if (di->flags.usb_thermal_prot)
+			val->intval = POWER_SUPPLY_HEALTH_OVERHEAT;
+		else if (di->flags.vbus_ovv)
+			val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+		else
+			val->intval = POWER_SUPPLY_HEALTH_GOOD;
+		break;
+	case POWER_SUPPLY_PROP_ONLINE:
+		val->intval = di->usb.charger_online;
+		break;
+	case POWER_SUPPLY_PROP_PRESENT:
+		val->intval = di->usb.charger_connected;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		di->usb.charger_voltage = ab8500_charger_get_vbus_voltage(di);
+		val->intval = di->usb.charger_voltage * 1000;
+		break;
+	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
+		/*
+		 * This property is used to indicate when CV mode is entered
+		 * for the USB charger
+		 */
+		di->usb.cv_active = ab8500_charger_usb_cv(di);
+		val->intval = di->usb.cv_active;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		val->intval = ab8500_charger_get_usb_current(di) * 1000;
+		break;
+	case POWER_SUPPLY_PROP_CURRENT_AVG:
+		/*
+		 * This property is used to indicate when VBUS has collapsed
+		 * due to too high output current from the USB charger
+		 */
+		if (di->flags.vbus_collapse)
+			val->intval = 1;
+		else
+			val->intval = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
+/**
+ * ab8500_charger_init_hw_registers() - Set up charger related registers
+ * @di:		pointer to the ab8500_charger structure
+ *
+ * Set up charger OVV, watchdog and maximum voltage registers as well as
+ * charging of the backup battery
+ */
+static int ab8500_charger_init_hw_registers(struct ab8500_charger *di)
+{
+	int ret = 0;
+
+	/* Setup maximum charger current and voltage for ABB cut2.0 */
+	if (!is_ab8500_1p1_or_earlier(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_CH_VOLT_LVL_MAX_REG, CH_VOL_LVL_4P6);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to set CH_VOLT_LVL_MAX_REG\n");
+			goto out;
+		}
+
+		ret = abx500_set_register_interruptible(di->dev,
+			AB8500_CHARGER,
+			AB8500_CH_OPT_CRNTLVL_MAX_REG, CH_OP_CUR_LVL_1P6);
+		if (ret) {
+			dev_err(di->dev,
+				"failed to set CH_OPT_CRNTLVL_MAX_REG\n");
+			goto out;
+		}
+	}
+
+	/* VBUS OVV set to 6.3V and enable automatic current limitiation */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_CHARGER,
+		AB8500_USBCH_CTRL2_REG,
+		VBUS_OVV_SELECT_6P3V | VBUS_AUTO_IN_CURR_LIM_ENA);
+	if (ret) {
+		dev_err(di->dev, "failed to set VBUS OVV\n");
+		goto out;
+	}
+
+	/* Enable main watchdog in OTP */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_OTP_EMUL, AB8500_OTP_CONF_15, OTP_ENABLE_WD);
+	if (ret) {
+		dev_err(di->dev, "failed to enable main WD in OTP\n");
+		goto out;
+	}
+
+	/* Enable main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_ENA);
+	if (ret) {
+		dev_err(di->dev, "faile to enable main watchdog\n");
+		goto out;
+	}
+
+	/*
+	 * Due to internal synchronisation, Enable and Kick watchdog bits
+	 * cannot be enabled in a single write.
+	 * A minimum delay of 2*32 kHz period (62.5µs) must be inserted
+	 * between writing Enable then Kick bits.
+	 */
+	udelay(63);
+
+	/* Kick main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG,
+		(MAIN_WDOG_ENA | MAIN_WDOG_KICK));
+	if (ret) {
+		dev_err(di->dev, "failed to kick main watchdog\n");
+		goto out;
+	}
+
+	/* Disable main watchdog */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_SYS_CTRL2_BLOCK,
+		AB8500_MAIN_WDOG_CTRL_REG, MAIN_WDOG_DIS);
+	if (ret) {
+		dev_err(di->dev, "failed to disable main watchdog\n");
+		goto out;
+	}
+
+	/* Set watchdog timeout */
+	ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+		AB8500_CH_WD_TIMER_REG, WD_TIMER);
+	if (ret) {
+		dev_err(di->dev, "failed to set charger watchdog timeout\n");
+		goto out;
+	}
+
+	/* Backup battery voltage and current */
+	ret = abx500_set_register_interruptible(di->dev,
+		AB8500_RTC,
+		AB8500_RTC_BACKUP_CHG_REG,
+		di->bat->bkup_bat_v |
+		di->bat->bkup_bat_i);
+	if (ret) {
+		dev_err(di->dev, "failed to setup backup battery charging\n");
+		goto out;
+	}
+
+	/* Enable backup battery charging */
+	abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_RTC, AB8500_RTC_CTRL_REG,
+		RTC_BUP_CH_ENA, RTC_BUP_CH_ENA);
+	if (ret < 0)
+		dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+out:
+	return ret;
+}
+
+/*
+ * ab8500 charger driver interrupts and their respective isr
+ */
+static struct ab8500_charger_interrupts ab8500_charger_irq[] = {
+	{"MAIN_CH_UNPLUG_DET", ab8500_charger_mainchunplugdet_handler},
+	{"MAIN_CHARGE_PLUG_DET", ab8500_charger_mainchplugdet_handler},
+	{"MAIN_EXT_CH_NOT_OK", ab8500_charger_mainextchnotok_handler},
+	{"MAIN_CH_TH_PROT_R", ab8500_charger_mainchthprotr_handler},
+	{"MAIN_CH_TH_PROT_F", ab8500_charger_mainchthprotf_handler},
+	{"VBUS_DET_F", ab8500_charger_vbusdetf_handler},
+	{"VBUS_DET_R", ab8500_charger_vbusdetr_handler},
+	{"USB_LINK_STATUS", ab8500_charger_usblinkstatus_handler},
+	{"USB_CH_TH_PROT_R", ab8500_charger_usbchthprotr_handler},
+	{"USB_CH_TH_PROT_F", ab8500_charger_usbchthprotf_handler},
+	{"USB_CHARGER_NOT_OKR", ab8500_charger_usbchargernotokr_handler},
+	{"VBUS_OVV", ab8500_charger_vbusovv_handler},
+	{"CH_WD_EXP", ab8500_charger_chwdexp_handler},
+};
+
+static int ab8500_charger_usb_notifier_call(struct notifier_block *nb,
+		unsigned long event, void *power)
+{
+	struct ab8500_charger *di =
+		container_of(nb, struct ab8500_charger, nb);
+	enum ab8500_usb_state bm_usb_state;
+	unsigned mA = *((unsigned *)power);
+
+	if (event != USB_EVENT_VBUS) {
+		dev_dbg(di->dev, "not a standard host, returning\n");
+		return NOTIFY_DONE;
+	}
+
+	/* TODO: State is fabricate  here. See if charger really needs USB
+	 * state or if mA is enough
+	 */
+	if ((di->usb_state.usb_current == 2) && (mA > 2))
+		bm_usb_state = AB8500_BM_USB_STATE_RESUME;
+	else if (mA == 0)
+		bm_usb_state = AB8500_BM_USB_STATE_RESET_HS;
+	else if (mA == 2)
+		bm_usb_state = AB8500_BM_USB_STATE_SUSPEND;
+	else if (mA >= 8) /* 8, 100, 500 */
+		bm_usb_state = AB8500_BM_USB_STATE_CONFIGURED;
+	else /* Should never occur */
+		bm_usb_state = AB8500_BM_USB_STATE_RESET_FS;
+
+	dev_dbg(di->dev, "%s usb_state: 0x%02x mA: %d\n",
+		__func__, bm_usb_state, mA);
+
+	spin_lock(&di->usb_state.usb_lock);
+	di->usb_state.usb_changed = true;
+	spin_unlock(&di->usb_state.usb_lock);
+
+	di->usb_state.state = bm_usb_state;
+	di->usb_state.usb_current = mA;
+
+	queue_work(di->charger_wq, &di->usb_state_changed_work);
+
+	return NOTIFY_OK;
+}
+
+#if defined(CONFIG_PM)
+static int ab8500_charger_resume(struct platform_device *pdev)
+{
+	int ret;
+	struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+	/*
+	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+	 * logic. That means we have to continously kick the charger
+	 * watchdog even when no charger is connected. This is only
+	 * valid once the AC charger has been enabled. This is
+	 * a bug that is not handled by the algorithm and the
+	 * watchdog have to be kicked by the charger driver
+	 * when the AC charger is disabled
+	 */
+	if (di->ac_conn && is_ab8500_1p1_or_earlier(di->parent)) {
+		ret = abx500_set_register_interruptible(di->dev, AB8500_CHARGER,
+			AB8500_CHARG_WD_CTRL, CHARG_WD_KICK);
+		if (ret)
+			dev_err(di->dev, "Failed to kick WD!\n");
+
+		/* If not already pending start a new timer */
+		if (!delayed_work_pending(
+			&di->kick_wd_work)) {
+			queue_delayed_work(di->charger_wq, &di->kick_wd_work,
+				round_jiffies(WD_KICK_INTERVAL));
+		}
+	}
+
+	/* If we still have a HW failure, schedule a new check */
+	if (di->flags.mainextchnotok || di->flags.vbus_ovv) {
+		queue_delayed_work(di->charger_wq,
+			&di->check_hw_failure_work, 0);
+	}
+
+	return 0;
+}
+
+static int ab8500_charger_suspend(struct platform_device *pdev,
+	pm_message_t state)
+{
+	struct ab8500_charger *di = platform_get_drvdata(pdev);
+
+	/* Cancel any pending HW failure check */
+	if (delayed_work_pending(&di->check_hw_failure_work))
+		cancel_delayed_work(&di->check_hw_failure_work);
+
+	return 0;
+}
+#else
+#define ab8500_charger_suspend      NULL
+#define ab8500_charger_resume       NULL
+#endif
+
+static int __devexit ab8500_charger_remove(struct platform_device *pdev)
+{
+	struct ab8500_charger *di = platform_get_drvdata(pdev);
+	int i, irq, ret;
+
+	/* Disable AC charging */
+	ab8500_charger_ac_en(&di->ac_chg, false, 0, 0);
+
+	/* Disable USB charging */
+	ab8500_charger_usb_en(&di->usb_chg, false, 0, 0);
+
+	/* Disable interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		free_irq(irq, di);
+	}
+
+	/* disable the regulator */
+	regulator_put(di->regu);
+
+	/* Backup battery voltage and current disable */
+	ret = abx500_mask_and_set_register_interruptible(di->dev,
+		AB8500_RTC, AB8500_RTC_CTRL_REG, RTC_BUP_CH_ENA, 0);
+	if (ret < 0)
+		dev_err(di->dev, "%s mask and set failed\n", __func__);
+
+	otg_unregister_notifier(di->otg, &di->nb);
+	otg_put_transceiver(di->otg);
+
+	/* Delete the work queue */
+	destroy_workqueue(di->charger_wq);
+
+	flush_scheduled_work();
+	power_supply_unregister(&di->usb_chg.psy);
+	power_supply_unregister(&di->ac_chg.psy);
+	platform_set_drvdata(pdev, NULL);
+	kfree(di);
+
+	return 0;
+}
+
+static int __devinit ab8500_charger_probe(struct platform_device *pdev)
+{
+	int irq, i, charger_status, ret = 0;
+	struct abx500_bm_plat_data *plat_data;
+
+	struct ab8500_charger *di =
+		kzalloc(sizeof(struct ab8500_charger), GFP_KERNEL);
+	if (!di)
+		return -ENOMEM;
+
+	/* get parent data */
+	di->dev = &pdev->dev;
+	di->parent = dev_get_drvdata(pdev->dev.parent);
+	di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
+
+	/* initialize lock */
+	spin_lock_init(&di->usb_state.usb_lock);
+
+	/* get charger specific platform data */
+	plat_data = pdev->dev.platform_data;
+	di->pdata = plat_data->charger;
+
+	if (!di->pdata) {
+		dev_err(di->dev, "no charger platform data supplied\n");
+		ret = -EINVAL;
+		goto free_device_info;
+	}
+
+	/* get battery specific platform data */
+	di->bat = plat_data->battery;
+	if (!di->bat) {
+		dev_err(di->dev, "no battery platform data supplied\n");
+		ret = -EINVAL;
+		goto free_device_info;
+	}
+
+	di->autopower = false;
+
+	/* AC supply */
+	/* power_supply base class */
+	di->ac_chg.psy.name = "ab8500_ac";
+	di->ac_chg.psy.type = POWER_SUPPLY_TYPE_MAINS;
+	di->ac_chg.psy.properties = ab8500_charger_ac_props;
+	di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props);
+	di->ac_chg.psy.get_property = ab8500_charger_ac_get_property;
+	di->ac_chg.psy.supplied_to = di->pdata->supplied_to;
+	di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants;
+	/* ux500_charger sub-class */
+	di->ac_chg.ops.enable = &ab8500_charger_ac_en;
+	di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+	di->ac_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+	di->ac_chg.max_out_volt = ab8500_charger_voltage_map[
+		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+	di->ac_chg.max_out_curr = ab8500_charger_current_map[
+		ARRAY_SIZE(ab8500_charger_current_map) - 1];
+
+	/* USB supply */
+	/* power_supply base class */
+	di->usb_chg.psy.name = "ab8500_usb";
+	di->usb_chg.psy.type = POWER_SUPPLY_TYPE_USB;
+	di->usb_chg.psy.properties = ab8500_charger_usb_props;
+	di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props);
+	di->usb_chg.psy.get_property = ab8500_charger_usb_get_property;
+	di->usb_chg.psy.supplied_to = di->pdata->supplied_to;
+	di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants;
+	/* ux500_charger sub-class */
+	di->usb_chg.ops.enable = &ab8500_charger_usb_en;
+	di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
+	di->usb_chg.ops.update_curr = &ab8500_charger_update_charger_current;
+	di->usb_chg.max_out_volt = ab8500_charger_voltage_map[
+		ARRAY_SIZE(ab8500_charger_voltage_map) - 1];
+	di->usb_chg.max_out_curr = ab8500_charger_current_map[
+		ARRAY_SIZE(ab8500_charger_current_map) - 1];
+
+
+	/* Create a work queue for the charger */
+	di->charger_wq =
+		create_singlethread_workqueue("ab8500_charger_wq");
+	if (di->charger_wq == NULL) {
+		dev_err(di->dev, "failed to create work queue\n");
+		goto free_device_info;
+	}
+
+	/* Init work for HW failure check */
+	INIT_DELAYED_WORK_DEFERRABLE(&di->check_hw_failure_work,
+		ab8500_charger_check_hw_failure_work);
+	INIT_DELAYED_WORK_DEFERRABLE(&di->check_usbchgnotok_work,
+		ab8500_charger_check_usbchargernotok_work);
+
+	/*
+	 * For ABB revision 1.0 and 1.1 there is a bug in the watchdog
+	 * logic. That means we have to continously kick the charger
+	 * watchdog even when no charger is connected. This is only
+	 * valid once the AC charger has been enabled. This is
+	 * a bug that is not handled by the algorithm and the
+	 * watchdog have to be kicked by the charger driver
+	 * when the AC charger is disabled
+	 */
+	INIT_DELAYED_WORK_DEFERRABLE(&di->kick_wd_work,
+		ab8500_charger_kick_watchdog_work);
+
+	INIT_DELAYED_WORK_DEFERRABLE(&di->check_vbat_work,
+		ab8500_charger_check_vbat_work);
+
+	/* Init work for charger detection */
+	INIT_WORK(&di->usb_link_status_work,
+		ab8500_charger_usb_link_status_work);
+	INIT_WORK(&di->ac_work, ab8500_charger_ac_work);
+	INIT_WORK(&di->detect_usb_type_work,
+		ab8500_charger_detect_usb_type_work);
+
+	INIT_WORK(&di->usb_state_changed_work,
+		ab8500_charger_usb_state_changed_work);
+
+	/* Init work for checking HW status */
+	INIT_WORK(&di->check_main_thermal_prot_work,
+		ab8500_charger_check_main_thermal_prot_work);
+	INIT_WORK(&di->check_usb_thermal_prot_work,
+		ab8500_charger_check_usb_thermal_prot_work);
+
+	/*
+	 * VDD ADC supply needs to be enabled from this driver when there
+	 * is a charger connected to avoid erroneous BTEMP_HIGH/LOW
+	 * interrupts during charging
+	 */
+	di->regu = regulator_get(di->dev, "vddadc");
+	if (IS_ERR(di->regu)) {
+		ret = PTR_ERR(di->regu);
+		dev_err(di->dev, "failed to get vddadc regulator\n");
+		goto free_charger_wq;
+	}
+
+
+	/* Initialize OVV, and other registers */
+	ret = ab8500_charger_init_hw_registers(di);
+	if (ret) {
+		dev_err(di->dev, "failed to initialize ABB registers\n");
+		goto free_regulator;
+	}
+
+	/* Register AC charger class */
+	ret = power_supply_register(di->dev, &di->ac_chg.psy);
+	if (ret) {
+		dev_err(di->dev, "failed to register AC charger\n");
+		goto free_regulator;
+	}
+
+	/* Register USB charger class */
+	ret = power_supply_register(di->dev, &di->usb_chg.psy);
+	if (ret) {
+		dev_err(di->dev, "failed to register USB charger\n");
+		goto free_ac;
+	}
+
+	di->otg = otg_get_transceiver();
+	if (!di->otg) {
+		dev_err(di->dev, "failed to get otg transceiver\n");
+		ret = -EINVAL;
+		goto free_usb;
+	}
+	di->nb.notifier_call = ab8500_charger_usb_notifier_call;
+	ret = otg_register_notifier(di->otg, &di->nb);
+	if (ret) {
+		dev_err(di->dev, "failed to register otg notifier\n");
+		goto put_otg_transceiver;
+	}
+
+	/* Identify the connected charger types during startup */
+	charger_status = ab8500_charger_detect_chargers(di);
+	if (charger_status & AC_PW_CONN) {
+		di->ac.charger_connected = 1;
+		di->ac_conn = true;
+		ab8500_power_supply_changed(di, &di->ac_chg.psy);
+		sysfs_notify(&di->ac_chg.psy.dev->kobj, NULL, "present");
+	}
+
+	if (charger_status & USB_PW_CONN) {
+		dev_dbg(di->dev, "VBUS Detect during startup\n");
+		di->vbus_detected = true;
+		di->vbus_detected_start = true;
+		queue_work(di->charger_wq,
+			&di->detect_usb_type_work);
+	}
+
+	/* Register interrupts */
+	for (i = 0; i < ARRAY_SIZE(ab8500_charger_irq); i++) {
+		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		ret = request_threaded_irq(irq, NULL, ab8500_charger_irq[i].isr,
+			IRQF_SHARED | IRQF_NO_SUSPEND,
+			ab8500_charger_irq[i].name, di);
+
+		if (ret != 0) {
+			dev_err(di->dev, "failed to request %s IRQ %d: %d\n"
+				, ab8500_charger_irq[i].name, irq, ret);
+			goto free_irq;
+		}
+		dev_dbg(di->dev, "Requested %s IRQ %d: %d\n",
+			ab8500_charger_irq[i].name, irq, ret);
+	}
+
+	platform_set_drvdata(pdev, di);
+
+	return ret;
+
+free_irq:
+	otg_unregister_notifier(di->otg, &di->nb);
+
+	/* We also have to free all successfully registered irqs */
+	for (i = i - 1; i >= 0; i--) {
+		irq = platform_get_irq_byname(pdev, ab8500_charger_irq[i].name);
+		free_irq(irq, di);
+	}
+put_otg_transceiver:
+	otg_put_transceiver(di->otg);
+free_usb:
+	power_supply_unregister(&di->usb_chg.psy);
+free_ac:
+	power_supply_unregister(&di->ac_chg.psy);
+free_regulator:
+	regulator_put(di->regu);
+free_charger_wq:
+	destroy_workqueue(di->charger_wq);
+free_device_info:
+	kfree(di);
+
+	return ret;
+}
+
+static struct platform_driver ab8500_charger_driver = {
+	.probe = ab8500_charger_probe,
+	.remove = __devexit_p(ab8500_charger_remove),
+	.suspend = ab8500_charger_suspend,
+	.resume = ab8500_charger_resume,
+	.driver = {
+		.name = "ab8500-charger",
+		.owner = THIS_MODULE,
+	},
+};
+
+static int __init ab8500_charger_init(void)
+{
+	return platform_driver_register(&ab8500_charger_driver);
+}
+
+static void __exit ab8500_charger_exit(void)
+{
+	platform_driver_unregister(&ab8500_charger_driver);
+}
+
+subsys_initcall_sync(ab8500_charger_init);
+module_exit(ab8500_charger_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Johan Palsson, Karl Komierowski, Arun R Murthy");
+MODULE_ALIAS("platform:ab8500-charger");
+MODULE_DESCRIPTION("AB8500 charger management driver");