pwm: samsung: Rename to pwm-samsung-legacy

This patch renames the old pwm-samsung driver to pwm-samsung-legacy to
create place for the new, rewritten, DT-aware pwm-samsung driver.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Tested-by: Mark Brown <broonie@linaro.org>
Tested-by: Sylwester Nawrocki <sylvester.nawrocki@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Thierry Reding <thierry.reding@gmail.com>

1 files changed, 0 insertions, 353 deletions

diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
deleted file mode 100644
index a0ece50d70b..00000000000
--- a/drivers/pwm/pwm-samsung.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/* drivers/pwm/pwm-samsung.c
- *
- * Copyright (c) 2007 Ben Dooks
- * Copyright (c) 2008 Simtec Electronics
- *	Ben Dooks <ben@simtec.co.uk>, <ben-linux@fluff.org>
- *
- * S3C series PWM device core
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License.
-*/
-
-#define pr_fmt(fmt) "pwm-samsung: " fmt
-
-#include <linux/export.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/pwm.h>
-
-#include <mach/map.h>
-
-#include <plat/regs-timer.h>
-
-struct s3c_chip {
-	struct platform_device	*pdev;
-
-	struct clk		*clk_div;
-	struct clk		*clk;
-	const char		*label;
-
-	unsigned int		 period_ns;
-	unsigned int		 duty_ns;
-
-	unsigned char		 tcon_base;
-	unsigned char		 pwm_id;
-	struct pwm_chip		 chip;
-};
-
-#define to_s3c_chip(chip)	container_of(chip, struct s3c_chip, chip)
-
-#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
-
-static struct clk *clk_scaler[2];
-
-static inline int pwm_is_tdiv(struct s3c_chip *chip)
-{
-	return clk_get_parent(chip->clk) == chip->clk_div;
-}
-
-#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
-#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
-#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
-#define pwm_tcon_manulupdate(pwm) (1 << (pwm->tcon_base + 1))
-
-static int s3c_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct s3c_chip *s3c = to_s3c_chip(chip);
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_start(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static void s3c_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct s3c_chip *s3c = to_s3c_chip(chip);
-	unsigned long flags;
-	unsigned long tcon;
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon &= ~pwm_tcon_start(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-}
-
-static unsigned long pwm_calc_tin(struct s3c_chip *s3c, unsigned long freq)
-{
-	unsigned long tin_parent_rate;
-	unsigned int div;
-
-	tin_parent_rate = clk_get_rate(clk_get_parent(s3c->clk_div));
-	pwm_dbg(s3c, "tin parent at %lu\n", tin_parent_rate);
-
-	for (div = 2; div <= 16; div *= 2) {
-		if ((tin_parent_rate / (div << 16)) < freq)
-			return tin_parent_rate / div;
-	}
-
-	return tin_parent_rate / 16;
-}
-
-#define NS_IN_HZ (1000000000UL)
-
-static int s3c_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-		int duty_ns, int period_ns)
-{
-	struct s3c_chip *s3c = to_s3c_chip(chip);
-	unsigned long tin_rate;
-	unsigned long tin_ns;
-	unsigned long period;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned long tcnt;
-	long tcmp;
-
-	/* We currently avoid using 64bit arithmetic by using the
-	 * fact that anything faster than 1Hz is easily representable
-	 * by 32bits. */
-
-	if (period_ns > NS_IN_HZ || duty_ns > NS_IN_HZ)
-		return -ERANGE;
-
-	if (period_ns == s3c->period_ns &&
-	    duty_ns == s3c->duty_ns)
-		return 0;
-
-	/* The TCMP and TCNT can be read without a lock, they're not
-	 * shared between the timers. */
-
-	tcmp = __raw_readl(S3C2410_TCMPB(s3c->pwm_id));
-	tcnt = __raw_readl(S3C2410_TCNTB(s3c->pwm_id));
-
-	period = NS_IN_HZ / period_ns;
-
-	pwm_dbg(s3c, "duty_ns=%d, period_ns=%d (%lu)\n",
-		duty_ns, period_ns, period);
-
-	/* Check to see if we are changing the clock rate of the PWM */
-
-	if (s3c->period_ns != period_ns) {
-		if (pwm_is_tdiv(s3c)) {
-			tin_rate = pwm_calc_tin(s3c, period);
-			clk_set_rate(s3c->clk_div, tin_rate);
-		} else
-			tin_rate = clk_get_rate(s3c->clk);
-
-		s3c->period_ns = period_ns;
-
-		pwm_dbg(s3c, "tin_rate=%lu\n", tin_rate);
-
-		tin_ns = NS_IN_HZ / tin_rate;
-		tcnt = period_ns / tin_ns;
-	} else
-		tin_ns = NS_IN_HZ / clk_get_rate(s3c->clk);
-
-	/* Note, counters count down */
-
-	tcmp = duty_ns / tin_ns;
-	tcmp = tcnt - tcmp;
-	/* the pwm hw only checks the compare register after a decrement,
-	   so the pin never toggles if tcmp = tcnt */
-	if (tcmp == tcnt)
-		tcmp--;
-
-	pwm_dbg(s3c, "tin_ns=%lu, tcmp=%ld/%lu\n", tin_ns, tcmp, tcnt);
-
-	if (tcmp < 0)
-		tcmp = 0;
-
-	/* Update the PWM register block. */
-
-	local_irq_save(flags);
-
-	__raw_writel(tcmp, S3C2410_TCMPB(s3c->pwm_id));
-	__raw_writel(tcnt, S3C2410_TCNTB(s3c->pwm_id));
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_manulupdate(s3c);
-	tcon |= pwm_tcon_autoreload(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	tcon &= ~pwm_tcon_manulupdate(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	return 0;
-}
-
-static struct pwm_ops s3c_pwm_ops = {
-	.enable = s3c_pwm_enable,
-	.disable = s3c_pwm_disable,
-	.config = s3c_pwm_config,
-	.owner = THIS_MODULE,
-};
-
-static int s3c_pwm_probe(struct platform_device *pdev)
-{
-	struct device *dev = &pdev->dev;
-	struct s3c_chip *s3c;
-	unsigned long flags;
-	unsigned long tcon;
-	unsigned int id = pdev->id;
-	int ret;
-
-	if (id == 4) {
-		dev_err(dev, "TIMER4 is currently not supported\n");
-		return -ENXIO;
-	}
-
-	s3c = devm_kzalloc(&pdev->dev, sizeof(*s3c), GFP_KERNEL);
-	if (s3c == NULL) {
-		dev_err(dev, "failed to allocate pwm_device\n");
-		return -ENOMEM;
-	}
-
-	/* calculate base of control bits in TCON */
-	s3c->tcon_base = id == 0 ? 0 : (id * 4) + 4;
-	s3c->pwm_id = id;
-	s3c->chip.dev = &pdev->dev;
-	s3c->chip.ops = &s3c_pwm_ops;
-	s3c->chip.base = -1;
-	s3c->chip.npwm = 1;
-
-	s3c->clk = devm_clk_get(dev, "pwm-tin");
-	if (IS_ERR(s3c->clk)) {
-		dev_err(dev, "failed to get pwm tin clk\n");
-		return PTR_ERR(s3c->clk);
-	}
-
-	s3c->clk_div = devm_clk_get(dev, "pwm-tdiv");
-	if (IS_ERR(s3c->clk_div)) {
-		dev_err(dev, "failed to get pwm tdiv clk\n");
-		return PTR_ERR(s3c->clk_div);
-	}
-
-	clk_enable(s3c->clk);
-	clk_enable(s3c->clk_div);
-
-	local_irq_save(flags);
-
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	local_irq_restore(flags);
-
-	ret = pwmchip_add(&s3c->chip);
-	if (ret < 0) {
-		dev_err(dev, "failed to register pwm\n");
-		goto err_clk_tdiv;
-	}
-
-	pwm_dbg(s3c, "config bits %02x\n",
-		(__raw_readl(S3C2410_TCON) >> s3c->tcon_base) & 0x0f);
-
-	dev_info(dev, "tin at %lu, tdiv at %lu, tin=%sclk, base %d\n",
-		 clk_get_rate(s3c->clk),
-		 clk_get_rate(s3c->clk_div),
-		 pwm_is_tdiv(s3c) ? "div" : "ext", s3c->tcon_base);
-
-	platform_set_drvdata(pdev, s3c);
-	return 0;
-
- err_clk_tdiv:
-	clk_disable(s3c->clk_div);
-	clk_disable(s3c->clk);
-	return ret;
-}
-
-static int s3c_pwm_remove(struct platform_device *pdev)
-{
-	struct s3c_chip *s3c = platform_get_drvdata(pdev);
-	int err;
-
-	err = pwmchip_remove(&s3c->chip);
-	if (err < 0)
-		return err;
-
-	clk_disable(s3c->clk_div);
-	clk_disable(s3c->clk);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int s3c_pwm_suspend(struct device *dev)
-{
-	struct s3c_chip *s3c = dev_get_drvdata(dev);
-
-	/* No one preserve these values during suspend so reset them
-	 * Otherwise driver leaves PWM unconfigured if same values
-	 * passed to pwm_config
-	 */
-	s3c->period_ns = 0;
-	s3c->duty_ns = 0;
-
-	return 0;
-}
-
-static int s3c_pwm_resume(struct device *dev)
-{
-	struct s3c_chip *s3c = dev_get_drvdata(dev);
-	unsigned long tcon;
-
-	/* Restore invertion */
-	tcon = __raw_readl(S3C2410_TCON);
-	tcon |= pwm_tcon_invert(s3c);
-	__raw_writel(tcon, S3C2410_TCON);
-
-	return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(s3c_pwm_pm_ops, s3c_pwm_suspend,
-			s3c_pwm_resume);
-
-static struct platform_driver s3c_pwm_driver = {
-	.driver		= {
-		.name	= "s3c24xx-pwm",
-		.owner	= THIS_MODULE,
-		.pm	= &s3c_pwm_pm_ops,
-	},
-	.probe		= s3c_pwm_probe,
-	.remove		= s3c_pwm_remove,
-};
-
-static int __init pwm_init(void)
-{
-	int ret;
-
-	clk_scaler[0] = clk_get(NULL, "pwm-scaler0");
-	clk_scaler[1] = clk_get(NULL, "pwm-scaler1");
-
-	if (IS_ERR(clk_scaler[0]) || IS_ERR(clk_scaler[1])) {
-		pr_err("failed to get scaler clocks\n");
-		return -EINVAL;
-	}
-
-	ret = platform_driver_register(&s3c_pwm_driver);
-	if (ret)
-		pr_err("failed to add pwm driver\n");
-
-	return ret;
-}
-
-arch_initcall(pwm_init);