diff options
| author | Krystian Garbaciak <krystian.garbaciak@diasemi.com> | 2013-07-29 19:00:45 +0200 |
|---|---|---|
| committer | Mark Brown <broonie@linaro.org> | 2013-08-29 19:34:59 +0100 |
| commit | 69ca3e58d17854f8fa72d85aea6bf4614ad25a56 (patch) | |
| tree | dbf4dc6541e6f947b97afd48262fb43f32fecef5 /drivers/regulator/Kconfig | |
| parent | c93e5bc9cbc9b70f19d4f41625028e71bd202fe2 (diff) | |
regulator: da9063: Add Dialog DA9063 voltage regulators support.
The driver adds support for the following DA9063 PMIC regulators:
- 11x LDOs (named LDO1 - LDO11),
- 6x buck converters (BCORE1, BCORE2, BPRO, BMEM, BIO, BPERI),
Regulators provide following operations:
- REGULATOR_CHANGE_STATUS and REGULATOR_CHANGE_VOLTAGE for all regulators,
- REGULATOR_CHANGE_MODE for LDOs and buck converters, where:
- LDOs allow REGULATOR_MODE_NORMAL and REGULATOR_MODE_STANDBY,
- buck converters allow REGULATOR_MODE_FAST, REGULATOR_MODE_NORMAL
and REGULATOR_MODE_STANDBY,
- REGULATOR_CHANGE_CURRENT for buck converters (current limits).
The driver generates REGULATOR_EVENT_OVER_CURRENT for LDO3, LDO4, LDO7, LDO8
and LDO11.
Internally, PMIC provides two voltage configurations for normal and suspend
system state for each regulator. The driver switches between those on
suspend/wake-up to provide quick and fluent output voltage change.
This driver requires MFD core driver for operation.
Signed-off-by: Krystian Garbaciak <krystian.garbaciak@diasemi.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'drivers/regulator/Kconfig')
| -rw-r--r-- | drivers/regulator/Kconfig | 10 |
1 files changed, 10 insertions, 0 deletions
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index fd4ae82c648..ae40cbdef59 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -147,6 +147,16 @@ config REGULATOR_DA9055 This driver can also be built as a module. If so, the module will be called da9055-regulator. +config REGULATOR_DA9063 + tristate "Dialog Semiconductor DA9063 regulators" + depends on MFD_DA9063 + help + Say y here to support the BUCKs and LDOs regulators found on + DA9063 PMICs. + + This driver can also be built as a module. If so, the module + will be called da9063-regulator. + config REGULATOR_DA9210 tristate "Dialog Semiconductor DA9210 regulator" depends on I2C |