da903x: add regulator support for DA9030/DA9034

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Liam Girdwood <lrg@kernel.org>

1 files changed, 513 insertions, 0 deletions

diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
new file mode 100644
index 00000000000..3688e339db8
--- /dev/null
+++ b/drivers/regulator/da903x.c
@@ -0,0 +1,513 @@
+/*
+ * Regulators driver for Dialog Semiconductor DA903x
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ * Copyright (C) 2008 Compulab Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/da903x.h>
+
+/* DA9030 Registers */
+#define DA9030_INVAL		(-1)
+#define DA9030_LDO1011		(0x10)
+#define DA9030_LDO15		(0x11)
+#define DA9030_LDO1416		(0x12)
+#define DA9030_LDO1819		(0x13)
+#define DA9030_LDO17		(0x14)
+#define DA9030_BUCK2DVM1	(0x15)
+#define DA9030_BUCK2DVM2	(0x16)
+#define DA9030_RCTL11		(0x17)
+#define DA9030_RCTL21		(0x18)
+#define DA9030_LDO1		(0x90)
+#define DA9030_LDO23		(0x91)
+#define DA9030_LDO45		(0x92)
+#define DA9030_LDO6		(0x93)
+#define DA9030_LDO78		(0x94)
+#define DA9030_LDO912		(0x95)
+#define DA9030_BUCK		(0x96)
+#define DA9030_RCTL12		(0x97)
+#define DA9030_RCTL22		(0x98)
+#define DA9030_LDO_UNLOCK	(0xa0)
+#define DA9030_LDO_UNLOCK_MASK	(0xe0)
+#define DA9034_OVER1		(0x10)
+
+/* DA9034 Registers */
+#define DA9034_INVAL		(-1)
+#define DA9034_OVER2		(0x11)
+#define DA9034_OVER3		(0x12)
+#define DA9034_LDO643		(0x13)
+#define DA9034_LDO987		(0x14)
+#define DA9034_LDO1110		(0x15)
+#define DA9034_LDO1312		(0x16)
+#define DA9034_LDO1514		(0x17)
+#define DA9034_VCC1		(0x20)
+#define DA9034_ADTV1		(0x23)
+#define DA9034_ADTV2		(0x24)
+#define DA9034_AVRC		(0x25)
+#define DA9034_CDTV1		(0x26)
+#define DA9034_CDTV2		(0x27)
+#define DA9034_CVRC		(0x28)
+#define DA9034_SDTV1		(0x29)
+#define DA9034_SDTV2		(0x2a)
+#define DA9034_SVRC		(0x2b)
+#define DA9034_MDTV1		(0x32)
+#define DA9034_MDTV2		(0x33)
+#define DA9034_MVRC		(0x34)
+
+struct da903x_regulator_info {
+	struct regulator_desc desc;
+
+	int	min_uV;
+	int	max_uV;
+	int	step_uV;
+	int	vol_reg;
+	int	vol_shift;
+	int	vol_nbits;
+	int	update_reg;
+	int	update_bit;
+	int	enable_reg;
+	int	enable_bit;
+};
+
+static inline int check_range(struct da903x_regulator_info *info,
+				int min_uV, int max_uV)
+{
+	if (min_uV < info->min_uV || min_uV > info->max_uV)
+		return -EINVAL;
+
+	return 0;
+}
+
+/* DA9030/DA9034 common operations */
+static int da903x_set_ldo_voltage(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val <<= info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	return da903x_update(da9034_dev, info->vol_reg, val, mask);
+}
+
+static int da903x_get_voltage(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int ret;
+
+	ret = da903x_read(da9034_dev, info->vol_reg, &val);
+	if (ret)
+		return ret;
+
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val = (val & mask) >> info->vol_shift;
+
+	return info->min_uV + info->step_uV * val;
+}
+
+static int da903x_enable(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+
+	return da903x_set_bits(da9034_dev, info->enable_reg,
+					1 << info->enable_bit);
+}
+
+static int da903x_disable(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+
+	return da903x_clr_bits(da9034_dev, info->enable_reg,
+					1 << info->enable_bit);
+}
+
+static int da903x_is_enabled(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t reg_val;
+	int ret;
+
+	ret = da903x_read(da9034_dev, info->enable_reg, &reg_val);
+	if (ret)
+		return ret;
+
+	return reg_val & (1 << info->enable_bit);
+}
+
+/* DA9030 specific operations */
+static int da9030_set_ldo1_15_voltage(struct regulator_dev *rdev,
+				       int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int ret;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val <<= info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val |= DA9030_LDO_UNLOCK; /* have to set UNLOCK bits */
+	mask |= DA9030_LDO_UNLOCK_MASK;
+
+	/* write twice */
+	ret = da903x_update(da903x_dev, info->vol_reg, val, mask);
+	if (ret)
+		return ret;
+
+	return da903x_update(da903x_dev, info->vol_reg, val, mask);
+}
+
+static int da9030_set_ldo14_voltage(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int thresh;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	thresh = (info->max_uV + info->min_uV) / 2;
+	if (min_uV < thresh) {
+		val = (thresh - min_uV + info->step_uV - 1) / info->step_uV;
+		val |= 0x4;
+	} else {
+		val = (min_uV - thresh + info->step_uV - 1) / info->step_uV;
+	}
+
+	val <<= info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	return da903x_update(da903x_dev, info->vol_reg, val, mask);
+}
+
+static int da9030_get_ldo14_voltage(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da903x_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int ret;
+
+	ret = da903x_read(da903x_dev, info->vol_reg, &val);
+	if (ret)
+		return ret;
+
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val = (val & mask) >> info->vol_shift;
+
+	if (val & 0x4)
+		return info->min_uV + info->step_uV * (3 - (val & ~0x4));
+	else
+		return (info->max_uV + info->min_uV) / 2 +
+			info->step_uV * (val & ~0x4);
+}
+
+/* DA9034 specific operations */
+static int da9034_set_dvc_voltage(struct regulator_dev *rdev,
+				  int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int ret;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val <<= info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	ret = da903x_update(da9034_dev, info->vol_reg, val, mask);
+	if (ret)
+		return ret;
+
+	ret = da903x_set_bits(da9034_dev, info->update_reg,
+					1 << info->update_bit);
+	return ret;
+}
+
+static int da9034_set_ldo12_voltage(struct regulator_dev *rdev,
+				    int min_uV, int max_uV)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+
+	if (check_range(info, min_uV, max_uV)) {
+		pr_err("invalid voltage range (%d, %d) uV", min_uV, max_uV);
+		return -EINVAL;
+	}
+
+	val = (min_uV - info->min_uV + info->step_uV - 1) / info->step_uV;
+	val = (val > 7 || val < 20) ? 8 : val - 12;
+	val <<= info->vol_shift;
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+
+	return da903x_update(da9034_dev, info->vol_reg, val, mask);
+}
+
+static int da9034_get_ldo12_voltage(struct regulator_dev *rdev)
+{
+	struct da903x_regulator_info *info = rdev_get_drvdata(rdev);
+	struct device *da9034_dev = rdev_get_dev(rdev)->parent;
+	uint8_t val, mask;
+	int ret;
+
+	ret = da903x_read(da9034_dev, info->vol_reg, &val);
+	if (ret)
+		return ret;
+
+	mask = ((1 << info->vol_nbits) - 1)  << info->vol_shift;
+	val = (val & mask) >> info->vol_shift;
+
+	if (val >= 8)
+		return 2700000 + info->step_uV * (val - 8);
+
+	return info->min_uV + info->step_uV * val;
+}
+
+static struct regulator_ops da903x_regulator_ldo_ops = {
+	.set_voltage	= da903x_set_ldo_voltage,
+	.get_voltage	= da903x_get_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the insane DA9030 LDO14 */
+static struct regulator_ops da9030_regulator_ldo14_ops = {
+	.set_voltage	= da9030_set_ldo14_voltage,
+	.get_voltage	= da9030_get_ldo14_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the DA9030 LDO1 and LDO15 that have locks  */
+static struct regulator_ops da9030_regulator_ldo1_15_ops = {
+	.set_voltage	= da9030_set_ldo1_15_voltage,
+	.get_voltage	= da903x_get_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+static struct regulator_ops da9034_regulator_dvc_ops = {
+	.set_voltage	= da9034_set_dvc_voltage,
+	.get_voltage	= da903x_get_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+/* NOTE: this is dedicated for the insane LDO12 */
+static struct regulator_ops da9034_regulator_ldo12_ops = {
+	.set_voltage	= da9034_set_ldo12_voltage,
+	.get_voltage	= da9034_get_ldo12_voltage,
+	.enable		= da903x_enable,
+	.disable	= da903x_disable,
+	.is_enabled	= da903x_is_enabled,
+};
+
+#define DA903x_LDO(_pmic, _id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+{									\
+	.desc	= {							\
+		.name	= "LDO" #_id,					\
+		.ops	= &da903x_regulator_ldo_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= _pmic##_ID_LDO##_id,				\
+		.owner	= THIS_MODULE,					\
+	},								\
+	.min_uV		= (min) * 1000,					\
+	.max_uV		= (max) * 1000,					\
+	.step_uV	= (step) * 1000,				\
+	.vol_reg	= _pmic##_##vreg,				\
+	.vol_shift	= (shift),					\
+	.vol_nbits	= (nbits),					\
+	.enable_reg	= _pmic##_##ereg,				\
+	.enable_bit	= (ebit),					\
+}
+
+#define DA9034_DVC(_id, min, max, step, vreg, nbits, ureg, ubit, ereg, ebit) \
+{									\
+	.desc	= {							\
+		.name	= #_id,						\
+		.ops	= &da9034_regulator_dvc_ops,			\
+		.type	= REGULATOR_VOLTAGE,				\
+		.id	= DA9034_ID_##_id,				\
+		.owner	= THIS_MODULE,					\
+	},								\
+	.min_uV		= (min) * 1000,					\
+	.max_uV		= (max) * 1000,					\
+	.step_uV	= (step) * 1000,				\
+	.vol_reg	= DA9034_##vreg,				\
+	.vol_shift	= (0),						\
+	.vol_nbits	= (nbits),					\
+	.update_reg	= DA9034_##ureg,				\
+	.update_bit	= (ubit),					\
+	.enable_reg	= DA9034_##ereg,				\
+	.enable_bit	= (ebit),					\
+}
+
+#define DA9034_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+	DA903x_LDO(DA9034, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
+
+#define DA9030_LDO(_id, min, max, step, vreg, shift, nbits, ereg, ebit)	\
+	DA903x_LDO(DA9030, _id, min, max, step, vreg, shift, nbits, ereg, ebit)
+
+static struct da903x_regulator_info da903x_regulator_info[] = {
+	/* DA9030 */
+	DA9030_LDO( 1, 1200, 3200, 100,    LDO1, 0, 5, RCTL12, 1),
+	DA9030_LDO( 2, 1800, 3200, 100,   LDO23, 0, 4, RCTL12, 2),
+	DA9030_LDO( 3, 1800, 3200, 100,   LDO23, 4, 4, RCTL12, 3),
+	DA9030_LDO( 4, 1800, 3200, 100,   LDO45, 0, 4, RCTL12, 4),
+	DA9030_LDO( 5, 1800, 3200, 100,   LDO45, 4, 4, RCTL12, 5),
+	DA9030_LDO( 6, 1800, 3200, 100,    LDO6, 0, 4, RCTL12, 6),
+	DA9030_LDO( 7, 1800, 3200, 100,   LDO78, 0, 4, RCTL12, 7),
+	DA9030_LDO( 8, 1800, 3200, 100,   LDO78, 4, 4, RCTL22, 0),
+	DA9030_LDO( 9, 1800, 3200, 100,  LDO912, 0, 4, RCTL22, 1),
+	DA9030_LDO(10, 1800, 3200, 100, LDO1011, 0, 4, RCTL22, 2),
+	DA9030_LDO(11, 1800, 3200, 100, LDO1011, 4, 4, RCTL22, 3),
+	DA9030_LDO(12, 1800, 3200, 100,  LDO912, 4, 4, RCTL22, 4),
+	DA9030_LDO(14, 2760, 2940,  30, LDO1416, 0, 3, RCTL11, 4),
+	DA9030_LDO(15, 1100, 2650,  50,	  LDO15, 0, 5, RCTL11, 5),
+	DA9030_LDO(16, 1100, 2650,  50, LDO1416, 3, 5, RCTL11, 6),
+	DA9030_LDO(17, 1800, 3200, 100,   LDO17, 0, 4, RCTL11, 7),
+	DA9030_LDO(18, 1800, 3200, 100, LDO1819, 0, 4, RCTL21, 2),
+	DA9030_LDO(19, 1800, 3200, 100, LDO1819, 4, 4, RCTL21, 1),
+	DA9030_LDO(13, 2100, 2100, 0, INVAL, 0, 0, RCTL11, 3), /* fixed @2.1V */
+
+	/* DA9034 */
+	DA9034_DVC(BUCK1, 725, 1500, 25, ADTV1, 5, VCC1, 0, OVER1, 0),
+	DA9034_DVC(BUCK2, 725, 1500, 25, CDTV1, 5, VCC1, 2, OVER1, 1),
+	DA9034_DVC(LDO2,  725, 1500, 25, SDTV1, 5, VCC1, 4, OVER1, 2),
+	DA9034_DVC(LDO1, 1700, 2075, 25, MDTV1, 4, VCC1, 6, OVER3, 4),
+
+	DA9034_LDO( 3, 1800, 3300, 100,  LDO643, 0, 4, OVER3, 5),
+	DA9034_LDO( 4, 1800, 2900,1100,  LDO643, 4, 1, OVER3, 6),
+	DA9034_LDO( 6, 2500, 2850,  50,  LDO643, 5, 3, OVER2, 0),
+	DA9034_LDO( 7, 2700, 3050,  50,  LDO987, 0, 3, OVER2, 1),
+	DA9034_LDO( 8, 2700, 2850,  50,  LDO987, 3, 2, OVER2, 2),
+	DA9034_LDO( 9, 2700, 3050,  50,  LDO987, 5, 3, OVER2, 3),
+	DA9034_LDO(10, 2700, 3050,  50, LDO1110, 0, 3, OVER2, 4),
+	DA9034_LDO(11, 1800, 3300, 100, LDO1110, 4, 4, OVER2, 5),
+	DA9034_LDO(12, 1700, 3050,  50, LDO1312, 0, 4, OVER3, 6),
+	DA9034_LDO(13, 1800, 3300, 100, LDO1312, 4, 4, OVER2, 7),
+	DA9034_LDO(14, 1800, 3300, 100, LDO1514, 0, 4, OVER3, 0),
+	DA9034_LDO(15, 1800, 3300, 100, LDO1514, 4, 4, OVER3, 1),
+	DA9034_LDO(5, 3100, 3100, 0, INVAL, 0, 0, OVER3, 7), /* fixed @3.1V */
+};
+
+static inline struct da903x_regulator_info *find_regulator_info(int id)
+{
+	struct da903x_regulator_info *ri;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(da903x_regulator_info); i++) {
+		ri = &da903x_regulator_info[i];
+		if (ri->desc.id == id)
+			return ri;
+	}
+	return NULL;
+}
+
+static int __devinit da903x_regulator_probe(struct platform_device *pdev)
+{
+	struct da903x_regulator_info *ri = NULL;
+	struct regulator_dev *rdev;
+
+	ri = find_regulator_info(pdev->id);
+	if (ri == NULL) {
+		dev_err(&pdev->dev, "invalid regulator ID specified\n");
+		return -EINVAL;
+	}
+
+	/* Workaround for the weird LDO12 voltage setting */
+	if (ri->desc.id == DA9034_ID_LDO12)
+		ri->desc.ops = &da9034_regulator_ldo12_ops;
+
+	if (ri->desc.id == DA9030_ID_LDO14)
+		ri->desc.ops = &da9030_regulator_ldo14_ops;
+
+	if (ri->desc.id == DA9030_ID_LDO1 || ri->desc.id == DA9030_ID_LDO15)
+		ri->desc.ops = &da9030_regulator_ldo1_15_ops;
+
+	rdev = regulator_register(&ri->desc, pdev->dev.parent, ri);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "failed to register regulator %s\n",
+				ri->desc.name);
+		return PTR_ERR(rdev);
+	}
+
+	platform_set_drvdata(pdev, rdev);
+	return 0;
+}
+
+static int __devexit da903x_regulator_remove(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev = platform_get_drvdata(pdev);
+
+	regulator_unregister(rdev);
+	return 0;
+}
+
+static struct platform_driver da903x_regulator_driver = {
+	.driver	= {
+		.name	= "da903x-regulator",
+		.owner	= THIS_MODULE,
+	},
+	.probe		= da903x_regulator_probe,
+	.remove		= da903x_regulator_remove,
+};
+
+static int __init da903x_regulator_init(void)
+{
+	return platform_driver_register(&da903x_regulator_driver);
+}
+module_init(da903x_regulator_init);
+
+static void __exit da903x_regulator_exit(void)
+{
+	platform_driver_unregister(&da903x_regulator_driver);
+}
+module_exit(da903x_regulator_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>"
+	      "Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("Regulator Driver for Dialog Semiconductor DA903X PMIC");
+MODULE_ALIAS("platform:da903x-regulator");