Merge remote-tracking branch 'regulator/topic/stub' into regulator-next

5 files changed, 58 insertions, 3 deletions

diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index ab06474e5eb..b5042c885d8 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -3,7 +3,7 @@
 #
 
 
-obj-$(CONFIG_REGULATOR) += core.o dummy.o
+obj-$(CONFIG_REGULATOR) += core.o dummy.o fixed-helper.o
 obj-$(CONFIG_OF) += of_regulator.o
 obj-$(CONFIG_REGULATOR_FIXED_VOLTAGE) += fixed.o
 obj-$(CONFIG_REGULATOR_VIRTUAL_CONSUMER) += virtual.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index fc4ccf880cb..8f11d0eb59a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -2723,6 +2723,8 @@ static void rdev_init_debugfs(struct regulator_dev *rdev)
  * @dev: struct device for the regulator
  * @init_data: platform provided init data, passed through by driver
  * @driver_data: private regulator data
+ * @of_node: OpenFirmware node to parse for device tree bindings (may be
+ *           NULL).
  *
  * Called by regulator drivers to register a regulator.
  * Returns 0 on success.
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
new file mode 100644
index 00000000000..30d0a15b894
--- /dev/null
+++ b/drivers/regulator/fixed-helper.c
@@ -0,0 +1,53 @@
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/fixed.h>
+
+struct fixed_regulator_data {
+	struct fixed_voltage_config cfg;
+	struct regulator_init_data init_data;
+	struct platform_device pdev;
+};
+
+static void regulator_fixed_release(struct device *dev)
+{
+	struct fixed_regulator_data *data = container_of(dev,
+			struct fixed_regulator_data, pdev.dev);
+	kfree(data);
+}
+
+/**
+ * regulator_register_fixed - register a no-op fixed regulator
+ * @name: supply name
+ * @id: platform device id
+ * @supplies: consumers for this regulator
+ * @num_supplies: number of consumers
+ */
+struct platform_device *regulator_register_fixed(int id,
+		struct regulator_consumer_supply *supplies, int num_supplies)
+{
+	struct fixed_regulator_data *data;
+
+	data = kzalloc(sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return NULL;
+
+	data->cfg.supply_name = "dummy";
+	data->cfg.microvolts = 0;
+	data->cfg.gpio = -EINVAL;
+	data->cfg.enabled_at_boot = 1;
+	data->cfg.init_data = &data->init_data;
+
+	data->init_data.constraints.always_on = 1;
+	data->init_data.consumer_supplies = supplies;
+	data->init_data.num_consumer_supplies = num_supplies;
+
+	data->pdev.name = "reg-fixed-voltage";
+	data->pdev.id = id;
+	data->pdev.dev.platform_data = &data->cfg;
+	data->pdev.dev.release = regulator_fixed_release;
+
+	platform_device_register(&data->pdev);
+
+	return &data->pdev;
+}
diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c
index 82505fcb8d4..824c650436e 100644
--- a/drivers/regulator/max8649.c
+++ b/drivers/regulator/max8649.c
@@ -149,7 +149,7 @@ static int max8649_enable_time(struct regulator_dev *rdev)
 	if (ret != 0)
 		return ret;
 	val &= MAX8649_VOL_MASK;
-	voltage = max8649_list_voltage(rdev, (unsigned char)ret); /* uV */
+	voltage = max8649_list_voltage(rdev, (unsigned char)val); /* uV */
 
 	/* get rate */
 	ret = regmap_read(info->regmap, MAX8649_RAMP, &val);
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index f1651eb6964..679734d26a1 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -35,7 +35,7 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (constraints->min_uV != constraints->max_uV)
 		constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
 	/* Only one voltage?  Then make sure it's set. */
-	if (constraints->min_uV == constraints->max_uV)
+	if (min_uV && max_uV && constraints->min_uV == constraints->max_uV)
 		constraints->apply_uV = true;
 
 	uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL);