[SCSI] zfcp: replace current ERP logging with a more convenient version

The current number based id ERP logging is replaced by a string
based tag version. The benefit is an easier location of the code in
question and the removal of the lengthy array referencing the
individual messages.
The string (7 bytes) based version does not use more space since those
bytes were "used" anyway due to the alignment of the structure.
The encoding of the 7 byte string is as follows
        [0-1] = filename
        [2-5] = task/function
        [6]   = section
Due to the character of this string (fixed length) a string
termination is not required here.

Signed-off-by: Swen Schillig <swen@vnet.ibm.com>
Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

1 files changed, 17 insertions, 171 deletions

diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index ab843f23d42..0a1a5dd8d01 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -490,172 +490,17 @@ static const char *zfcp_rec_dbf_tags[] = {
 	[ZFCP_REC_DBF_ID_ACTION] = "action",
 };
 
-static const char *zfcp_rec_dbf_ids[] = {
-	[1]	= "new",
-	[2]	= "ready",
-	[3]	= "kill",
-	[4]	= "down sleep",
-	[5]	= "down wakeup",
-	[6]	= "down sleep ecd",
-	[7]	= "down wakeup ecd",
-	[8]	= "down sleep epd",
-	[9]	= "down wakeup epd",
-	[10]	= "online",
-	[11]	= "operational",
-	[12]	= "scsi slave destroy",
-	[13]	= "propagate failed adapter",
-	[14]	= "propagate failed port",
-	[15]	= "block adapter",
-	[16]	= "unblock adapter",
-	[17]	= "block port",
-	[18]	= "unblock port",
-	[19]	= "block unit",
-	[20]	= "unblock unit",
-	[21]	= "unit recovery failed",
-	[22]	= "port recovery failed",
-	[23]	= "adapter recovery failed",
-	[24]	= "qdio queues down",
-	[25]	= "p2p failed",
-	[26]	= "nameserver lookup failed",
-	[27]	= "nameserver port failed",
-	[28]	= "link up",
-	[29]	= "link down",
-	[30]	= "link up status read",
-	[31]	= "open port failed",
-	[32]	= "",
-	[33]	= "close port",
-	[34]	= "open unit failed",
-	[35]	= "exclusive open unit failed",
-	[36]	= "shared open unit failed",
-	[37]	= "link down",
-	[38]	= "link down status read no link",
-	[39]	= "link down status read fdisc login",
-	[40]	= "link down status read firmware update",
-	[41]	= "link down status read unknown reason",
-	[42]	= "link down ecd incomplete",
-	[43]	= "link down epd incomplete",
-	[44]	= "sysfs adapter recovery",
-	[45]	= "sysfs port recovery",
-	[46]	= "sysfs unit recovery",
-	[47]	= "port boxed abort",
-	[48]	= "unit boxed abort",
-	[49]	= "port boxed ct",
-	[50]	= "port boxed close physical",
-	[51]	= "port boxed open unit",
-	[52]	= "port boxed close unit",
-	[53]	= "port boxed fcp",
-	[54]	= "unit boxed fcp",
-	[55]	= "port access denied",
-	[56]	= "",
-	[57]	= "",
-	[58]	= "",
-	[59]	= "unit access denied",
-	[60]	= "shared unit access denied open unit",
-	[61]	= "",
-	[62]	= "request timeout",
-	[63]	= "adisc link test reject or timeout",
-	[64]	= "adisc link test d_id changed",
-	[65]	= "adisc link test failed",
-	[66]	= "recovery out of memory",
-	[67]	= "adapter recovery repeated after state change",
-	[68]	= "port recovery repeated after state change",
-	[69]	= "unit recovery repeated after state change",
-	[70]	= "port recovery follow-up after successful adapter recovery",
-	[71]	= "adapter recovery escalation after failed adapter recovery",
-	[72]	= "port recovery follow-up after successful physical port "
-		  "recovery",
-	[73]	= "adapter recovery escalation after failed physical port "
-		  "recovery",
-	[74]	= "unit recovery follow-up after successful port recovery",
-	[75]	= "physical port recovery escalation after failed port "
-		  "recovery",
-	[76]	= "port recovery escalation after failed unit recovery",
-	[77]	= "",
-	[78]	= "duplicate request id",
-	[79]	= "link down",
-	[80]	= "exclusive read-only unit access unsupported",
-	[81]	= "shared read-write unit access unsupported",
-	[82]	= "incoming rscn",
-	[83]	= "incoming wwpn",
-	[84]	= "wka port handle not valid close port",
-	[85]	= "online",
-	[86]	= "offline",
-	[87]	= "ccw device gone",
-	[88]	= "ccw device no path",
-	[89]	= "ccw device operational",
-	[90]	= "ccw device shutdown",
-	[91]	= "sysfs port addition",
-	[92]	= "sysfs port removal",
-	[93]	= "sysfs adapter recovery",
-	[94]	= "sysfs unit addition",
-	[95]	= "sysfs unit removal",
-	[96]	= "sysfs port recovery",
-	[97]	= "sysfs unit recovery",
-	[98]	= "sequence number mismatch",
-	[99]	= "link up",
-	[100]	= "error state",
-	[101]	= "status read physical port closed",
-	[102]	= "link up status read",
-	[103]	= "too many failed status read buffers",
-	[104]	= "port handle not valid abort",
-	[105]	= "lun handle not valid abort",
-	[106]	= "port handle not valid ct",
-	[107]	= "port handle not valid close port",
-	[108]	= "port handle not valid close physical port",
-	[109]	= "port handle not valid open unit",
-	[110]	= "port handle not valid close unit",
-	[111]	= "lun handle not valid close unit",
-	[112]	= "port handle not valid fcp",
-	[113]	= "lun handle not valid fcp",
-	[114]	= "handle mismatch fcp",
-	[115]	= "lun not valid fcp",
-	[116]	= "qdio send failed",
-	[117]	= "version mismatch",
-	[118]	= "incompatible qtcb type",
-	[119]	= "unknown protocol status",
-	[120]	= "unknown fsf command",
-	[121]	= "no recommendation for status qualifier",
-	[122]	= "",
-	[123]	= "fc service class not supported",
-	[124]	= "",
-	[125]	= "need newer zfcp",
-	[126]	= "need newer microcode",
-	[127]	= "arbitrated loop not supported",
-	[128]	= "",
-	[129]	= "qtcb size mismatch",
-	[130]	= "unknown fsf status ecd",
-	[131]	= "fcp request too big",
-	[132]	= "",
-	[133]	= "data direction not valid fcp",
-	[134]	= "command length not valid fcp",
-	[135]	= "status read act update",
-	[136]	= "status read cfdc update",
-	[137]	= "hbaapi port open",
-	[138]	= "hbaapi unit open",
-	[139]	= "hbaapi unit shutdown",
-	[140]	= "qdio error outbound",
-	[141]	= "scsi host reset",
-	[142]	= "dismissing fsf request for recovery action",
-	[143]	= "recovery action timed out",
-	[144]	= "recovery action gone",
-	[145]	= "recovery action being processed",
-	[146]	= "recovery action ready for next step",
-	[147]	= "qdio error inbound",
-	[148]   = "nameserver needed for port scan",
-	[149]   = "port scan",
-	[150]	= "ptp attach",
-	[151]   = "port validation failed",
-};
-
 static int zfcp_rec_dbf_view_format(debug_info_t *id, struct debug_view *view,
 				    char *buf, const char *_rec)
 {
 	struct zfcp_rec_dbf_record *r = (struct zfcp_rec_dbf_record *)_rec;
 	char *p = buf;
+	char hint[ZFCP_DBF_ID_SIZE + 1];
 
+	memcpy(hint, r->id2, ZFCP_DBF_ID_SIZE);
+	hint[ZFCP_DBF_ID_SIZE] = 0;
 	zfcp_dbf_outs(&p, "tag", zfcp_rec_dbf_tags[r->id]);
-	zfcp_dbf_outs(&p, "hint", zfcp_rec_dbf_ids[r->id2]);
-	zfcp_dbf_out(&p, "id", "%d", r->id2);
+	zfcp_dbf_outs(&p, "hint", hint);
 	switch (r->id) {
 	case ZFCP_REC_DBF_ID_THREAD:
 		zfcp_dbf_out(&p, "total", "%d", r->u.thread.total);
@@ -707,7 +552,7 @@ static struct debug_view zfcp_rec_dbf_view = {
  * @adapter: adapter
  * This function assumes that the caller is holding erp_lock.
  */
-void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter)
+void zfcp_rec_dbf_event_thread(char *id2, struct zfcp_adapter *adapter)
 {
 	struct zfcp_rec_dbf_record *r = &adapter->rec_dbf_buf;
 	unsigned long flags = 0;
@@ -723,7 +568,7 @@ void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter)
 	spin_lock_irqsave(&adapter->rec_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	r->id = ZFCP_REC_DBF_ID_THREAD;
-	r->id2 = id2;
+	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
 	r->u.thread.total = total;
 	r->u.thread.ready = ready;
 	r->u.thread.running = running;
@@ -737,7 +582,7 @@ void zfcp_rec_dbf_event_thread(u8 id2, struct zfcp_adapter *adapter)
  * @adapter: adapter
  * This function assumes that the caller does not hold erp_lock.
  */
-void zfcp_rec_dbf_event_thread_lock(u8 id2, struct zfcp_adapter *adapter)
+void zfcp_rec_dbf_event_thread_lock(char *id2, struct zfcp_adapter *adapter)
 {
 	unsigned long flags;
 
@@ -746,7 +591,7 @@ void zfcp_rec_dbf_event_thread_lock(u8 id2, struct zfcp_adapter *adapter)
 	read_unlock_irqrestore(&adapter->erp_lock, flags);
 }
 
-static void zfcp_rec_dbf_event_target(u8 id2, void *ref,
+static void zfcp_rec_dbf_event_target(char *id2, void *ref,
 				      struct zfcp_adapter *adapter,
 				      atomic_t *status, atomic_t *erp_count,
 				      u64 wwpn, u32 d_id, u64 fcp_lun)
@@ -757,7 +602,7 @@ static void zfcp_rec_dbf_event_target(u8 id2, void *ref,
 	spin_lock_irqsave(&adapter->rec_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	r->id = ZFCP_REC_DBF_ID_TARGET;
-	r->id2 = id2;
+	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
 	r->u.target.ref = (unsigned long)ref;
 	r->u.target.status = atomic_read(status);
 	r->u.target.wwpn = wwpn;
@@ -774,7 +619,8 @@ static void zfcp_rec_dbf_event_target(u8 id2, void *ref,
  * @ref: additional reference (e.g. request)
  * @adapter: adapter
  */
-void zfcp_rec_dbf_event_adapter(u8 id, void *ref, struct zfcp_adapter *adapter)
+void zfcp_rec_dbf_event_adapter(char *id, void *ref,
+				struct zfcp_adapter *adapter)
 {
 	zfcp_rec_dbf_event_target(id, ref, adapter, &adapter->status,
 				  &adapter->erp_counter, 0, 0, 0);
@@ -786,7 +632,7 @@ void zfcp_rec_dbf_event_adapter(u8 id, void *ref, struct zfcp_adapter *adapter)
  * @ref: additional reference (e.g. request)
  * @port: port
  */
-void zfcp_rec_dbf_event_port(u8 id, void *ref, struct zfcp_port *port)
+void zfcp_rec_dbf_event_port(char *id, void *ref, struct zfcp_port *port)
 {
 	struct zfcp_adapter *adapter = port->adapter;
 
@@ -801,7 +647,7 @@ void zfcp_rec_dbf_event_port(u8 id, void *ref, struct zfcp_port *port)
  * @ref: additional reference (e.g. request)
  * @unit: unit
  */
-void zfcp_rec_dbf_event_unit(u8 id, void *ref, struct zfcp_unit *unit)
+void zfcp_rec_dbf_event_unit(char *id, void *ref, struct zfcp_unit *unit)
 {
 	struct zfcp_port *port = unit->port;
 	struct zfcp_adapter *adapter = port->adapter;
@@ -822,7 +668,7 @@ void zfcp_rec_dbf_event_unit(u8 id, void *ref, struct zfcp_unit *unit)
  * @port: port
  * @unit: unit
  */
-void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need,
+void zfcp_rec_dbf_event_trigger(char *id2, void *ref, u8 want, u8 need,
 				void *action, struct zfcp_adapter *adapter,
 				struct zfcp_port *port, struct zfcp_unit *unit)
 {
@@ -832,7 +678,7 @@ void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need,
 	spin_lock_irqsave(&adapter->rec_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	r->id = ZFCP_REC_DBF_ID_TRIGGER;
-	r->id2 = id2;
+	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
 	r->u.trigger.ref = (unsigned long)ref;
 	r->u.trigger.want = want;
 	r->u.trigger.need = need;
@@ -855,7 +701,7 @@ void zfcp_rec_dbf_event_trigger(u8 id2, void *ref, u8 want, u8 need,
  * @id2: identifier
  * @erp_action: error recovery action struct pointer
  */
-void zfcp_rec_dbf_event_action(u8 id2, struct zfcp_erp_action *erp_action)
+void zfcp_rec_dbf_event_action(char *id2, struct zfcp_erp_action *erp_action)
 {
 	struct zfcp_adapter *adapter = erp_action->adapter;
 	struct zfcp_rec_dbf_record *r = &adapter->rec_dbf_buf;
@@ -864,7 +710,7 @@ void zfcp_rec_dbf_event_action(u8 id2, struct zfcp_erp_action *erp_action)
 	spin_lock_irqsave(&adapter->rec_dbf_lock, flags);
 	memset(r, 0, sizeof(*r));
 	r->id = ZFCP_REC_DBF_ID_ACTION;
-	r->id2 = id2;
+	memcpy(r->id2, id2, ZFCP_DBF_ID_SIZE);
 	r->u.action.action = (unsigned long)erp_action;
 	r->u.action.status = erp_action->status;
 	r->u.action.step = erp_action->step;