s390/tape: remove tape block leftovers

Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>

5 files changed, 2 insertions, 311 deletions

diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
index 267b54e8ff5..bc6c7cfd36b 100644
--- a/drivers/s390/char/tape.h
+++ b/drivers/s390/char/tape.h
@@ -154,12 +154,6 @@ struct tape_discipline {
 	struct tape_request *(*read_block)(struct tape_device *, size_t);
 	struct tape_request *(*write_block)(struct tape_device *, size_t);
 	void (*process_eov)(struct tape_device*);
-#ifdef CONFIG_S390_TAPE_BLOCK
-	/* Block device stuff. */
-	struct tape_request *(*bread)(struct tape_device *, struct request *);
-	void (*check_locate)(struct tape_device *, struct tape_request *);
-	void (*free_bread)(struct tape_request *);
-#endif
 	/* ioctl function for additional ioctls. */
 	int (*ioctl_fn)(struct tape_device *, unsigned int, unsigned long);
 	/* Array of tape commands with TAPE_NR_MTOPS entries */
@@ -182,26 +176,6 @@ struct tape_char_data {
 	int block_size;			/*   of size block_size. */
 };
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-/* Block Frontend Data */
-struct tape_blk_data
-{
-	struct tape_device *	device;
-	/* Block device request queue. */
-	struct request_queue *	request_queue;
-	spinlock_t		request_queue_lock;
-
-	/* Task to move entries from block request to CCS request queue. */
-	struct work_struct	requeue_task;
-	atomic_t		requeue_scheduled;
-
-	/* Current position on the tape. */
-	long			block_position;
-	int			medium_changed;
-	struct gendisk *	disk;
-};
-#endif
-
 /* Tape Info */
 struct tape_device {
 	/* entry in tape_device_list */
@@ -248,10 +222,6 @@ struct tape_device {
 
 	/* Character device frontend data */
 	struct tape_char_data		char_data;
-#ifdef CONFIG_S390_TAPE_BLOCK
-	/* Block dev frontend data */
-	struct tape_blk_data		blk_data;
-#endif
 
 	/* Function to start or stop the next request later. */
 	struct delayed_work		tape_dnr;
@@ -313,19 +283,6 @@ extern void tapechar_exit(void);
 extern int  tapechar_setup_device(struct tape_device *);
 extern void tapechar_cleanup_device(struct tape_device *);
 
-/* Externals from tape_block.c */
-#ifdef CONFIG_S390_TAPE_BLOCK
-extern int tapeblock_init (void);
-extern void tapeblock_exit(void);
-extern int tapeblock_setup_device(struct tape_device *);
-extern void tapeblock_cleanup_device(struct tape_device *);
-#else
-static inline int tapeblock_init (void) {return 0;}
-static inline void tapeblock_exit (void) {;}
-static inline int tapeblock_setup_device(struct tape_device *t) {return 0;}
-static inline void tapeblock_cleanup_device (struct tape_device *t) {;}
-#endif
-
 /* tape initialisation functions */
 #ifdef CONFIG_PROC_FS
 extern void tape_proc_init (void);
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
index 934ef33eb9a..b28de80b7ca 100644
--- a/drivers/s390/char/tape_34xx.c
+++ b/drivers/s390/char/tape_34xx.c
@@ -323,20 +323,6 @@ tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
 	inhibit_cu_recovery = (*device->modeset_byte & 0x80) ? 1 : 0;
 	sense = irb->ecw;
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-	if (request->op == TO_BLOCK) {
-		/*
-		 * Recovery for block device requests. Set the block_position
-		 * to something invalid and retry.
-		 */
-		device->blk_data.block_position = -1;
-		if (request->retries-- <= 0)
-			return tape_34xx_erp_failed(request, -EIO);
-		else
-			return tape_34xx_erp_retry(request);
-	}
-#endif
-
 	if (
 		sense[0] & SENSE_COMMAND_REJECT &&
 		sense[1] & SENSE_WRITE_PROTECT
@@ -1129,123 +1115,6 @@ tape_34xx_mtseek(struct tape_device *device, int mt_count)
 	return tape_do_io_free(device, request);
 }
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-/*
- * Tape block read for 34xx.
- */
-static struct tape_request *
-tape_34xx_bread(struct tape_device *device, struct request *req)
-{
-	struct tape_request *request;
-	struct ccw1 *ccw;
-	int count = 0;
-	unsigned off;
-	char *dst;
-	struct bio_vec *bv;
-	struct req_iterator iter;
-	struct tape_34xx_block_id *	start_block;
-
-	DBF_EVENT(6, "xBREDid:");
-
-	/* Count the number of blocks for the request. */
-	rq_for_each_segment(bv, req, iter)
-		count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
-
-	/* Allocate the ccw request. */
-	request = tape_alloc_request(3+count+1, 8);
-	if (IS_ERR(request))
-		return request;
-
-	/* Setup ccws. */
-	request->op = TO_BLOCK;
-	start_block = (struct tape_34xx_block_id *) request->cpdata;
-	start_block->block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
-	DBF_EVENT(6, "start_block = %i\n", start_block->block);
-
-	ccw = request->cpaddr;
-	ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);
-
-	/*
-	 * We always setup a nop after the mode set ccw. This slot is
-	 * used in tape_std_check_locate to insert a locate ccw if the
-	 * current tape position doesn't match the start block to be read.
-	 * The second nop will be filled with a read block id which is in
-	 * turn used by tape_34xx_free_bread to populate the segment bid
-	 * table.
-	 */
-	ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
-	ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
-
-	rq_for_each_segment(bv, req, iter) {
-		dst = kmap(bv->bv_page) + bv->bv_offset;
-		for (off = 0; off < bv->bv_len; off += TAPEBLOCK_HSEC_SIZE) {
-			ccw->flags = CCW_FLAG_CC;
-			ccw->cmd_code = READ_FORWARD;
-			ccw->count = TAPEBLOCK_HSEC_SIZE;
-			set_normalized_cda(ccw, (void*) __pa(dst));
-			ccw++;
-			dst += TAPEBLOCK_HSEC_SIZE;
-		}
-	}
-
-	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
-	DBF_EVENT(6, "xBREDccwg\n");
-	return request;
-}
-
-static void
-tape_34xx_free_bread (struct tape_request *request)
-{
-	struct ccw1* ccw;
-
-	ccw = request->cpaddr;
-	if ((ccw + 2)->cmd_code == READ_BLOCK_ID) {
-		struct {
-			struct tape_34xx_block_id	cbid;
-			struct tape_34xx_block_id	dbid;
-		} __attribute__ ((packed)) *rbi_data;
-
-		rbi_data = request->cpdata;
-
-		if (request->device)
-			tape_34xx_add_sbid(request->device, rbi_data->cbid);
-	}
-
-	/* Last ccw is a nop and doesn't need clear_normalized_cda */
-	for (; ccw->flags & CCW_FLAG_CC; ccw++)
-		if (ccw->cmd_code == READ_FORWARD)
-			clear_normalized_cda(ccw);
-	tape_free_request(request);
-}
-
-/*
- * check_locate is called just before the tape request is passed to
- * the common io layer for execution. It has to check the current
- * tape position and insert a locate ccw if it doesn't match the
- * start block for the request.
- */
-static void
-tape_34xx_check_locate(struct tape_device *device, struct tape_request *request)
-{
-	struct tape_34xx_block_id *	start_block;
-
-	start_block = (struct tape_34xx_block_id *) request->cpdata;
-	if (start_block->block == device->blk_data.block_position)
-		return;
-
-	DBF_LH(4, "Block seek(%06d+%06d)\n", start_block->block, device->bof);
-	start_block->wrap    = 0;
-	start_block->segment = 1;
-	start_block->format  = (*device->modeset_byte & 0x08) ?
-				TAPE34XX_FMT_3480_XF :
-				TAPE34XX_FMT_3480;
-	start_block->block   = start_block->block + device->bof;
-	tape_34xx_merge_sbid(device, start_block);
-	tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
-	tape_ccw_cc(request->cpaddr + 2, READ_BLOCK_ID, 8, request->cpdata);
-}
-#endif
-
 /*
  * List of 3480/3490 magnetic tape commands.
  */
@@ -1295,11 +1164,6 @@ static struct tape_discipline tape_discipline_34xx = {
 	.irq = tape_34xx_irq,
 	.read_block = tape_std_read_block,
 	.write_block = tape_std_write_block,
-#ifdef CONFIG_S390_TAPE_BLOCK
-	.bread = tape_34xx_bread,
-	.free_bread = tape_34xx_free_bread,
-	.check_locate = tape_34xx_check_locate,
-#endif
 	.ioctl_fn = tape_34xx_ioctl,
 	.mtop_array = tape_34xx_mtop
 };
diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c
index 49c6aab7ad7..a5c6614b0db 100644
--- a/drivers/s390/char/tape_3590.c
+++ b/drivers/s390/char/tape_3590.c
@@ -670,92 +670,6 @@ tape_3590_schedule_work(struct tape_device *device, enum tape_op op)
 	return 0;
 }
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-/*
- * Tape Block READ
- */
-static struct tape_request *
-tape_3590_bread(struct tape_device *device, struct request *req)
-{
-	struct tape_request *request;
-	struct ccw1 *ccw;
-	int count = 0, start_block;
-	unsigned off;
-	char *dst;
-	struct bio_vec *bv;
-	struct req_iterator iter;
-
-	DBF_EVENT(6, "xBREDid:");
-	start_block = blk_rq_pos(req) >> TAPEBLOCK_HSEC_S2B;
-	DBF_EVENT(6, "start_block = %i\n", start_block);
-
-	rq_for_each_segment(bv, req, iter)
-		count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
-
-	request = tape_alloc_request(2 + count + 1, 4);
-	if (IS_ERR(request))
-		return request;
-	request->op = TO_BLOCK;
-	*(__u32 *) request->cpdata = start_block;
-	ccw = request->cpaddr;
-	ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);
-
-	/*
-	 * We always setup a nop after the mode set ccw. This slot is
-	 * used in tape_std_check_locate to insert a locate ccw if the
-	 * current tape position doesn't match the start block to be read.
-	 */
-	ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
-
-	rq_for_each_segment(bv, req, iter) {
-		dst = page_address(bv->bv_page) + bv->bv_offset;
-		for (off = 0; off < bv->bv_len; off += TAPEBLOCK_HSEC_SIZE) {
-			ccw->flags = CCW_FLAG_CC;
-			ccw->cmd_code = READ_FORWARD;
-			ccw->count = TAPEBLOCK_HSEC_SIZE;
-			set_normalized_cda(ccw, (void *) __pa(dst));
-			ccw++;
-			dst += TAPEBLOCK_HSEC_SIZE;
-		}
-		BUG_ON(off > bv->bv_len);
-	}
-	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
-	DBF_EVENT(6, "xBREDccwg\n");
-	return request;
-}
-
-static void
-tape_3590_free_bread(struct tape_request *request)
-{
-	struct ccw1 *ccw;
-
-	/* Last ccw is a nop and doesn't need clear_normalized_cda */
-	for (ccw = request->cpaddr; ccw->flags & CCW_FLAG_CC; ccw++)
-		if (ccw->cmd_code == READ_FORWARD)
-			clear_normalized_cda(ccw);
-	tape_free_request(request);
-}
-
-/*
- * check_locate is called just before the tape request is passed to
- * the common io layer for execution. It has to check the current
- * tape position and insert a locate ccw if it doesn't match the
- * start block for the request.
- */
-static void
-tape_3590_check_locate(struct tape_device *device, struct tape_request *request)
-{
-	__u32 *start_block;
-
-	start_block = (__u32 *) request->cpdata;
-	if (*start_block != device->blk_data.block_position) {
-		/* Add the start offset of the file to get the real block. */
-		*start_block += device->bof;
-		tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
-	}
-}
-#endif
-
 static void tape_3590_med_state_set(struct tape_device *device,
 				    struct tape_3590_med_sense *sense)
 {
@@ -1423,20 +1337,6 @@ tape_3590_unit_check(struct tape_device *device, struct tape_request *request,
 {
 	struct tape_3590_sense *sense;
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-	if (request->op == TO_BLOCK) {
-		/*
-		 * Recovery for block device requests. Set the block_position
-		 * to something invalid and retry.
-		 */
-		device->blk_data.block_position = -1;
-		if (request->retries-- <= 0)
-			return tape_3590_erp_failed(device, request, irb, -EIO);
-		else
-			return tape_3590_erp_retry(device, request, irb);
-	}
-#endif
-
 	sense = (struct tape_3590_sense *) irb->ecw;
 
 	DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc);
@@ -1729,11 +1629,6 @@ static struct tape_discipline tape_discipline_3590 = {
 	.irq = tape_3590_irq,
 	.read_block = tape_std_read_block,
 	.write_block = tape_std_write_block,
-#ifdef CONFIG_S390_TAPE_BLOCK
-	.bread = tape_3590_bread,
-	.free_bread = tape_3590_free_bread,
-	.check_locate = tape_3590_check_locate,
-#endif
 	.ioctl_fn = tape_3590_ioctl,
 	.mtop_array = tape_3590_mtop
 };
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
index 87cd0ab242d..46886a7578c 100644
--- a/drivers/s390/char/tape_char.c
+++ b/drivers/s390/char/tape_char.c
@@ -161,11 +161,6 @@ tapechar_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
 	if (rc)
 		return rc;
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-	/* Changes position. */
-	device->blk_data.medium_changed = 1;
-#endif
-
 	DBF_EVENT(6, "TCHAR:nbytes: %lx\n", block_size);
 	/* Let the discipline build the ccw chain. */
 	request = device->discipline->read_block(device, block_size);
@@ -218,11 +213,6 @@ tapechar_write(struct file *filp, const char __user *data, size_t count, loff_t
 	if (rc)
 		return rc;
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-	/* Changes position. */
-	device->blk_data.medium_changed = 1;
-#endif
-
 	DBF_EVENT(6,"TCHAR:nbytes: %lx\n", block_size);
 	DBF_EVENT(6, "TCHAR:nblocks: %x\n", nblocks);
 	/* Let the discipline build the ccw chain. */
@@ -379,9 +369,6 @@ __tapechar_ioctl(struct tape_device *device,
 			case MTBSFM:
 			case MTFSFM:
 			case MTSEEK:
-#ifdef CONFIG_S390_TAPE_BLOCK
-				device->blk_data.medium_changed = 1;
-#endif
 				if (device->required_tapemarks)
 					tape_std_terminate_write(device);
 			default:
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
index b3a3e8e8656..585618663ba 100644
--- a/drivers/s390/char/tape_core.c
+++ b/drivers/s390/char/tape_core.c
@@ -401,9 +401,6 @@ tape_generic_online(struct tape_device *device,
 	rc = tapechar_setup_device(device);
 	if (rc)
 		goto out_minor;
-	rc = tapeblock_setup_device(device);
-	if (rc)
-		goto out_char;
 
 	tape_state_set(device, TS_UNUSED);
 
@@ -411,8 +408,6 @@ tape_generic_online(struct tape_device *device,
 
 	return 0;
 
-out_char:
-	tapechar_cleanup_device(device);
 out_minor:
 	tape_remove_minor(device);
 out_discipline:
@@ -426,7 +421,6 @@ out:
 static void
 tape_cleanup_device(struct tape_device *device)
 {
-	tapeblock_cleanup_device(device);
 	tapechar_cleanup_device(device);
 	device->discipline->cleanup_device(device);
 	module_put(device->discipline->owner);
@@ -785,10 +779,6 @@ __tape_start_io(struct tape_device *device, struct tape_request *request)
 {
 	int rc;
 
-#ifdef CONFIG_S390_TAPE_BLOCK
-	if (request->op == TO_BLOCK)
-		device->discipline->check_locate(device, request);
-#endif
 	rc = ccw_device_start(
 		device->cdev,
 		request->cpaddr,
@@ -1253,7 +1243,7 @@ __tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
 }
 
 /*
- * Tape device open function used by tape_char & tape_block frontends.
+ * Tape device open function used by tape_char frontend.
  */
 int
 tape_open(struct tape_device *device)
@@ -1283,7 +1273,7 @@ tape_open(struct tape_device *device)
 }
 
 /*
- * Tape device release function used by tape_char & tape_block frontends.
+ * Tape device release function used by tape_char frontend.
  */
 int
 tape_release(struct tape_device *device)
@@ -1344,7 +1334,6 @@ tape_init (void)
 	DBF_EVENT(3, "tape init\n");
 	tape_proc_init();
 	tapechar_init ();
-	tapeblock_init ();
 	return 0;
 }
 
@@ -1358,7 +1347,6 @@ tape_exit(void)
 
 	/* Get rid of the frontends */
 	tapechar_exit();
-	tapeblock_exit();
 	tape_proc_cleanup();
 	debug_unregister (TAPE_DBF_AREA);
 }