Merge branch 'linus' into test

Conflicts:
	MAINTAINERS
	arch/x86/kernel/acpi/boot.c
	arch/x86/kernel/acpi/sleep.c
	drivers/acpi/Kconfig
	drivers/pnp/Makefile
	drivers/pnp/quirks.c

Signed-off-by: Len Brown <len.brown@intel.com>

20 files changed, 610 insertions, 4857 deletions

diff --git a/drivers/sbus/Makefile b/drivers/sbus/Makefile
index 7b1d24d9530..e94dc25805f 100644
--- a/drivers/sbus/Makefile
+++ b/drivers/sbus/Makefile
@@ -2,8 +2,4 @@
 # Makefile for the linux kernel.
 #
 
-ifneq ($(ARCH),m68k)
-obj-y    := sbus.o dvma.o
-endif
-
 obj-$(CONFIG_SBUSCHAR) += char/
diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig
index 400c65bfb8c..73cde85d04d 100644
--- a/drivers/sbus/char/Kconfig
+++ b/drivers/sbus/char/Kconfig
@@ -13,16 +13,6 @@ config SUN_OPENPROMIO
 
 	  If unsure, say Y.
 
-config SUN_MOSTEK_RTC
-	tristate "Mostek real time clock support"
-	depends on SPARC32
-	help
-	  The Mostek RTC chip is used on all known Sun computers except
-	  some JavaStations. For a JavaStation you need to say Y both here
-	  and to "Enhanced Real Time Clock Support".
-
-	  Say Y here unless you are building a special purpose kernel.
-
 config OBP_FLASH
 	tristate "OBP Flash Device support"
 	depends on SPARC64
@@ -30,26 +20,9 @@ config OBP_FLASH
 	  The OpenBoot PROM on Ultra systems is flashable. If you want to be
 	  able to upgrade the OBP firmware, say Y here.
 
-config SUN_BPP
-	tristate "Bidirectional parallel port support (OBSOLETE)"
-	depends on EXPERIMENTAL
-	help
-	  Say Y here to support Sun's obsolete variant of IEEE1284
-	  bidirectional parallel port protocol as /dev/bppX.  Can be built on
-	  x86 machines.
-
-config SUN_VIDEOPIX
-	tristate "Videopix Frame Grabber (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && (BROKEN || !64BIT)
-	help
-	  Say Y here to support the Videopix Frame Grabber from Sun
-	  Microsystems, commonly found on SPARCstations.  This card, which is
-	  based on the Phillips SAA9051, can handle NTSC and PAL/SECAM and
-	  SVIDEO signals.
-
 config TADPOLE_TS102_UCTRL
 	tristate "Tadpole TS102 Microcontroller support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && SPARC32
+	depends on EXPERIMENTAL
 	help
 	  Say Y here to directly support the TS102 Microcontroller interface
 	  on the Tadpole Sparcbook 3.  This device handles power-management
diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile
index 7ab060e9a5f..78b6183c986 100644
--- a/drivers/sbus/char/Makefile
+++ b/drivers/sbus/char/Makefile
@@ -7,18 +7,12 @@
 # Rewritten to use lists instead of if-statements.
 #
 
-vfc-objs := vfc_dev.o vfc_i2c.o
 bbc-objs := bbc_i2c.o bbc_envctrl.o
 
 obj-$(CONFIG_ENVCTRL)			+= envctrl.o
 obj-$(CONFIG_DISPLAY7SEG)		+= display7seg.o
-obj-$(CONFIG_WATCHDOG_CP1XXX)		+= cpwatchdog.o
-obj-$(CONFIG_WATCHDOG_RIO)		+= riowatchdog.o
 obj-$(CONFIG_OBP_FLASH)			+= flash.o
 obj-$(CONFIG_SUN_OPENPROMIO)		+= openprom.o
-obj-$(CONFIG_SUN_MOSTEK_RTC)		+= rtc.o
-obj-$(CONFIG_SUN_BPP)			+= bpp.o
-obj-$(CONFIG_SUN_VIDEOPIX)		+= vfc.o
 obj-$(CONFIG_TADPOLE_TS102_UCTRL)	+= uctrl.o
 obj-$(CONFIG_SUN_JSFLASH)		+= jsflash.o
 obj-$(CONFIG_BBC_I2C)			+= bbc.o
diff --git a/drivers/sbus/char/bbc_envctrl.c b/drivers/sbus/char/bbc_envctrl.c
index 0bde26989a2..15dab96d05e 100644
--- a/drivers/sbus/char/bbc_envctrl.c
+++ b/drivers/sbus/char/bbc_envctrl.c
@@ -1,15 +1,15 @@
-/* $Id: bbc_envctrl.c,v 1.4 2001/04/06 16:48:08 davem Exp $
- * bbc_envctrl.c: UltraSPARC-III environment control driver.
+/* bbc_envctrl.c: UltraSPARC-III environment control driver.
  *
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/kthread.h>
 #include <linux/delay.h>
 #include <linux/kmod.h>
 #include <linux/reboot.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/oplib.h>
-#include <asm/ebus.h>
 
 #include "bbc_i2c.h"
 #include "max1617.h"
@@ -75,43 +75,8 @@ static struct temp_limits amb_temp_limits[2] = {
 	{ 65, 55, 40, 5, -5, -10 },
 };
 
-enum fan_action { FAN_SLOWER, FAN_SAME, FAN_FASTER, FAN_FULLBLAST, FAN_STATE_MAX };
-
-struct bbc_cpu_temperature {
-	struct bbc_cpu_temperature	*next;
-
-	struct bbc_i2c_client		*client;
-	int				index;
-
-	/* Current readings, and history. */
-	s8				curr_cpu_temp;
-	s8				curr_amb_temp;
-	s8				prev_cpu_temp;
-	s8				prev_amb_temp;
-	s8				avg_cpu_temp;
-	s8				avg_amb_temp;
-
-	int				sample_tick;
-
-	enum fan_action			fan_todo[2];
-#define FAN_AMBIENT	0
-#define FAN_CPU		1
-};
-
-struct bbc_cpu_temperature *all_bbc_temps;
-
-struct bbc_fan_control {
-	struct bbc_fan_control 	*next;
-
-	struct bbc_i2c_client 	*client;
-	int 			index;
-
-	int			psupply_fan_on;
-	int			cpu_fan_speed;
-	int			system_fan_speed;
-};
-
-struct bbc_fan_control *all_bbc_fans;
+static LIST_HEAD(all_temps);
+static LIST_HEAD(all_fans);
 
 #define CPU_FAN_REG	0xf0
 #define SYS_FAN_REG	0xf2
@@ -330,7 +295,7 @@ static enum fan_action prioritize_fan_action(int which_fan)
 	 * recommend we do, and perform that action on all the
 	 * fans.
 	 */
-	for (tp = all_bbc_temps; tp; tp = tp->next) {
+	list_for_each_entry(tp, &all_temps, glob_list) {
 		if (tp->fan_todo[which_fan] == FAN_FULLBLAST) {
 			decision = FAN_FULLBLAST;
 			break;
@@ -439,7 +404,7 @@ static void fans_full_blast(void)
 	/* Since we will not be monitoring things anymore, put
 	 * the fans on full blast.
 	 */
-	for (fp = all_bbc_fans; fp; fp = fp->next) {
+	list_for_each_entry(fp, &all_fans, glob_list) {
 		fp->cpu_fan_speed = FAN_SPEED_MAX;
 		fp->system_fan_speed = FAN_SPEED_MAX;
 		fp->psupply_fan_on = 1;
@@ -463,11 +428,11 @@ static int kenvctrld(void *__unused)
 		if (kthread_should_stop())
 			break;
 
-		for (tp = all_bbc_temps; tp; tp = tp->next) {
+		list_for_each_entry(tp, &all_temps, glob_list) {
 			get_current_temps(tp);
 			analyze_temps(tp, &last_warning_jiffies);
 		}
-		for (fp = all_bbc_fans; fp; fp = fp->next)
+		list_for_each_entry(fp, &all_fans, glob_list)
 			maybe_new_fan_speeds(fp);
 	}
 	printk(KERN_INFO "bbc_envctrl: kenvctrld exiting...\n");
@@ -477,7 +442,8 @@ static int kenvctrld(void *__unused)
 	return 0;
 }
 
-static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
+static void attach_one_temp(struct bbc_i2c_bus *bp, struct of_device *op,
+			    int temp_idx)
 {
 	struct bbc_cpu_temperature *tp;
 
@@ -485,20 +451,17 @@ static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
 	if (!tp)
 		return;
 
-	tp->client = bbc_i2c_attach(echild);
+	tp->client = bbc_i2c_attach(bp, op);
 	if (!tp->client) {
 		kfree(tp);
 		return;
 	}
 
+
 	tp->index = temp_idx;
-	{
-		struct bbc_cpu_temperature **tpp = &all_bbc_temps;
-		while (*tpp)
-			tpp = &((*tpp)->next);
-		tp->next = NULL;
-		*tpp = tp;
-	}
+
+	list_add(&tp->glob_list, &all_temps);
+	list_add(&tp->bp_list, &bp->temps);
 
 	/* Tell it to convert once every 5 seconds, clear all cfg
 	 * bits.
@@ -524,7 +487,8 @@ static void attach_one_temp(struct linux_ebus_child *echild, int temp_idx)
 	tp->fan_todo[FAN_CPU] = FAN_SAME;
 }
 
-static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
+static void attach_one_fan(struct bbc_i2c_bus *bp, struct of_device *op,
+			   int fan_idx)
 {
 	struct bbc_fan_control *fp;
 
@@ -532,7 +496,7 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
 	if (!fp)
 		return;
 
-	fp->client = bbc_i2c_attach(echild);
+	fp->client = bbc_i2c_attach(bp, op);
 	if (!fp->client) {
 		kfree(fp);
 		return;
@@ -540,13 +504,8 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
 
 	fp->index = fan_idx;
 
-	{
-		struct bbc_fan_control **fpp = &all_bbc_fans;
-		while (*fpp)
-			fpp = &((*fpp)->next);
-		fp->next = NULL;
-		*fpp = fp;
-	}
+	list_add(&fp->glob_list, &all_fans);
+	list_add(&fp->bp_list, &bp->fans);
 
 	/* The i2c device controlling the fans is write-only.
 	 * So the only way to keep track of the current power
@@ -563,18 +522,18 @@ static void attach_one_fan(struct linux_ebus_child *echild, int fan_idx)
 	set_fan_speeds(fp);
 }
 
-int bbc_envctrl_init(void)
+int bbc_envctrl_init(struct bbc_i2c_bus *bp)
 {
-	struct linux_ebus_child *echild;
+	struct of_device *op;
 	int temp_index = 0;
 	int fan_index = 0;
 	int devidx = 0;
 
-	while ((echild = bbc_i2c_getdev(devidx++)) != NULL) {
-		if (!strcmp(echild->prom_node->name, "temperature"))
-			attach_one_temp(echild, temp_index++);
-		if (!strcmp(echild->prom_node->name, "fan-control"))
-			attach_one_fan(echild, fan_index++);
+	while ((op = bbc_i2c_getdev(bp, devidx++)) != NULL) {
+		if (!strcmp(op->node->name, "temperature"))
+			attach_one_temp(bp, op, temp_index++);
+		if (!strcmp(op->node->name, "fan-control"))
+			attach_one_fan(bp, op, fan_index++);
 	}
 	if (temp_index != 0 && fan_index != 0) {
 		kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
@@ -597,26 +556,22 @@ static void destroy_one_fan(struct bbc_fan_control *fp)
 	kfree(fp);
 }
 
-void bbc_envctrl_cleanup(void)
+void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp)
 {
-	struct bbc_cpu_temperature *tp;
-	struct bbc_fan_control *fp;
+	struct bbc_cpu_temperature *tp, *tpos;
+	struct bbc_fan_control *fp, *fpos;
 
 	kthread_stop(kenvctrld_task);
 
-	tp = all_bbc_temps;
-	while (tp != NULL) {
-		struct bbc_cpu_temperature *next = tp->next;
+	list_for_each_entry_safe(tp, tpos, &bp->temps, bp_list) {
+		list_del(&tp->bp_list);
+		list_del(&tp->glob_list);
 		destroy_one_temp(tp);
-		tp = next;
 	}
-	all_bbc_temps = NULL;
 
-	fp = all_bbc_fans;
-	while (fp != NULL) {
-		struct bbc_fan_control *next = fp->next;
+	list_for_each_entry_safe(fp, fpos, &bp->fans, bp_list) {
+		list_del(&fp->bp_list);
+		list_del(&fp->glob_list);
 		destroy_one_fan(fp);
-		fp = next;
 	}
-	all_bbc_fans = NULL;
 }
diff --git a/drivers/sbus/char/bbc_i2c.c b/drivers/sbus/char/bbc_i2c.c
index ac8ef2ce07f..f08e169ba1b 100644
--- a/drivers/sbus/char/bbc_i2c.c
+++ b/drivers/sbus/char/bbc_i2c.c
@@ -1,8 +1,7 @@
-/* $Id: bbc_i2c.c,v 1.2 2001/04/02 09:59:08 davem Exp $
- * bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
+/* bbc_i2c.c: I2C low-level driver for BBC device on UltraSPARC-III
  *            platforms.
  *
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
+ * Copyright (C) 2001, 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -14,9 +13,8 @@
 #include <linux/delay.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
-#include <asm/oplib.h>
-#include <asm/ebus.h>
-#include <asm/spitfire.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/bbc.h>
 #include <asm/io.h>
 
@@ -53,54 +51,12 @@
  * The second controller also connects to the smartcard reader, if present.
  */
 
-#define NUM_CHILDREN	8
-struct bbc_i2c_bus {
-	struct bbc_i2c_bus		*next;
-	int				index;
-	spinlock_t			lock;
-	void				__iomem *i2c_bussel_reg;
-	void				__iomem *i2c_control_regs;
-	unsigned char			own, clock;
-
-	wait_queue_head_t		wq;
-	volatile int			waiting;
-
-	struct linux_ebus_device	*bus_edev;
-	struct {
-		struct linux_ebus_child	*device;
-		int			client_claimed;
-	} devs[NUM_CHILDREN];
-};
-
-static struct bbc_i2c_bus *all_bbc_i2c;
-
-struct bbc_i2c_client {
-	struct bbc_i2c_bus	*bp;
-	struct linux_ebus_child	*echild;
-	int			bus;
-	int			address;
-};
-
-static int find_device(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild)
+static void set_device_claimage(struct bbc_i2c_bus *bp, struct of_device *op, int val)
 {
 	int i;
 
 	for (i = 0; i < NUM_CHILDREN; i++) {
-		if (bp->devs[i].device == echild) {
-			if (bp->devs[i].client_claimed)
-				return 0;
-			return 1;
-		}
-	}
-	return 0;
-}
-
-static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child *echild, int val)
-{
-	int i;
-
-	for (i = 0; i < NUM_CHILDREN; i++) {
-		if (bp->devs[i].device == echild) {
+		if (bp->devs[i].device == op) {
 			bp->devs[i].client_claimed = val;
 			return;
 		}
@@ -110,61 +66,47 @@ static void set_device_claimage(struct bbc_i2c_bus *bp, struct linux_ebus_child
 #define claim_device(BP,ECHILD)		set_device_claimage(BP,ECHILD,1)
 #define release_device(BP,ECHILD)	set_device_claimage(BP,ECHILD,0)
 
-static struct bbc_i2c_bus *find_bus_for_device(struct linux_ebus_child *echild)
+struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *bp, int index)
 {
-	struct bbc_i2c_bus *bp = all_bbc_i2c;
+	struct of_device *op = NULL;
+	int curidx = 0, i;
 
-	while (bp != NULL) {
-		if (find_device(bp, echild) != 0)
+	for (i = 0; i < NUM_CHILDREN; i++) {
+		if (!(op = bp->devs[i].device))
 			break;
-		bp = bp->next;
+		if (curidx == index)
+			goto out;
+		op = NULL;
+		curidx++;
 	}
 
-	return bp;
-}
-
-struct linux_ebus_child *bbc_i2c_getdev(int index)
-{
-	struct bbc_i2c_bus *bp = all_bbc_i2c;
-	struct linux_ebus_child *echild = NULL;
-	int curidx = 0;
-
-	while (bp != NULL) {
-		struct bbc_i2c_bus *next = bp->next;
-		int i;
-
-		for (i = 0; i < NUM_CHILDREN; i++) {
-			if (!(echild = bp->devs[i].device))
-				break;
-			if (curidx == index)
-				goto out;
-			echild = NULL;
-			curidx++;
-		}
-		bp = next;
-	}
 out:
 	if (curidx == index)
-		return echild;
+		return op;
 	return NULL;
 }
 
-struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild)
+struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *op)
 {
-	struct bbc_i2c_bus *bp = find_bus_for_device(echild);
 	struct bbc_i2c_client *client;
+	const u32 *reg;
 
-	if (!bp)
-		return NULL;
 	client = kzalloc(sizeof(*client), GFP_KERNEL);
 	if (!client)
 		return NULL;
 	client->bp = bp;
-	client->echild = echild;
-	client->bus = echild->resource[0].start;
-	client->address = echild->resource[1].start;
+	client->op = op;
+
+	reg = of_get_property(op->node, "reg", NULL);
+	if (!reg) {
+		kfree(client);
+		return NULL;
+	}
 
-	claim_device(bp, echild);
+	client->bus = reg[0];
+	client->address = reg[1];
+
+	claim_device(bp, op);
 
 	return client;
 }
@@ -172,9 +114,9 @@ struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *echild)
 void bbc_i2c_detach(struct bbc_i2c_client *client)
 {
 	struct bbc_i2c_bus *bp = client->bp;
-	struct linux_ebus_child *echild = client->echild;
+	struct of_device *op = client->op;
 
-	release_device(bp, echild);
+	release_device(bp, op);
 	kfree(client);
 }
 
@@ -355,44 +297,43 @@ static void __init reset_one_i2c(struct bbc_i2c_bus *bp)
 	writeb(I2C_PCF_IDLE, bp->i2c_control_regs + 0x0);
 }
 
-static int __init attach_one_i2c(struct linux_ebus_device *edev, int index)
+static struct bbc_i2c_bus * __init attach_one_i2c(struct of_device *op, int index)
 {
 	struct bbc_i2c_bus *bp;
-	struct linux_ebus_child *echild;
+	struct device_node *dp;
 	int entry;
 
 	bp = kzalloc(sizeof(*bp), GFP_KERNEL);
 	if (!bp)
-		return -ENOMEM;
+		return NULL;
 
-	bp->i2c_control_regs = ioremap(edev->resource[0].start, 0x2);
+	bp->i2c_control_regs = of_ioremap(&op->resource[0], 0, 0x2, "bbc_i2c_regs");
 	if (!bp->i2c_control_regs)
 		goto fail;
 
-	if (edev->num_addrs == 2) {
-		bp->i2c_bussel_reg = ioremap(edev->resource[1].start, 0x1);
-		if (!bp->i2c_bussel_reg)
-			goto fail;
-	}
+	bp->i2c_bussel_reg = of_ioremap(&op->resource[1], 0, 0x1, "bbc_i2c_bussel");
+	if (!bp->i2c_bussel_reg)
+		goto fail;
 
 	bp->waiting = 0;
 	init_waitqueue_head(&bp->wq);
-	if (request_irq(edev->irqs[0], bbc_i2c_interrupt,
+	if (request_irq(op->irqs[0], bbc_i2c_interrupt,
 			IRQF_SHARED, "bbc_i2c", bp))
 		goto fail;
 
 	bp->index = index;
-	bp->bus_edev = edev;
+	bp->op = op;
 
 	spin_lock_init(&bp->lock);
-	bp->next = all_bbc_i2c;
-	all_bbc_i2c = bp;
 
 	entry = 0;
-	for (echild = edev->children;
-	     echild && entry < 8;
-	     echild = echild->next, entry++) {
-		bp->devs[entry].device = echild;
+	for (dp = op->node->child;
+	     dp && entry < 8;
+	     dp = dp->sibling, entry++) {
+		struct of_device *child_op;
+
+		child_op = of_find_device_by_node(dp);
+		bp->devs[entry].device = child_op;
 		bp->devs[entry].client_claimed = 0;
 	}
 
@@ -406,86 +347,90 @@ static int __init attach_one_i2c(struct linux_ebus_device *edev, int index)
 
 	reset_one_i2c(bp);
 
-	return 0;
+	return bp;
 
 fail:
 	if (bp->i2c_bussel_reg)
-		iounmap(bp->i2c_bussel_reg);
+		of_iounmap(&op->resource[1], bp->i2c_bussel_reg, 1);
 	if (bp->i2c_control_regs)
-		iounmap(bp->i2c_control_regs);
+		of_iounmap(&op->resource[0], bp->i2c_control_regs, 2);
 	kfree(bp);
-	return -EINVAL;
-}
-
-static int __init bbc_present(void)
-{
-	struct linux_ebus *ebus = NULL;
-	struct linux_ebus_device *edev = NULL;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_node->name, "bbc"))
-				return 1;
-		}
-	}
-	return 0;
+	return NULL;
 }
 
-extern int bbc_envctrl_init(void);
-extern void bbc_envctrl_cleanup(void);
-static void bbc_i2c_cleanup(void);
+extern int bbc_envctrl_init(struct bbc_i2c_bus *bp);
+extern void bbc_envctrl_cleanup(struct bbc_i2c_bus *bp);
 
-static int __init bbc_i2c_init(void)
+static int __devinit bbc_i2c_probe(struct of_device *op,
+				   const struct of_device_id *match)
 {
-	struct linux_ebus *ebus = NULL;
-	struct linux_ebus_device *edev = NULL;
+	struct bbc_i2c_bus *bp;
 	int err, index = 0;
 
-	if ((tlb_type != cheetah && tlb_type != cheetah_plus) ||
-	    !bbc_present())
-		return -ENODEV;
+	bp = attach_one_i2c(op, index);
+	if (!bp)
+		return -EINVAL;
 
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_node->name, "i2c")) {
-				if (!attach_one_i2c(edev, index))
-					index++;
-			}
-		}
+	err = bbc_envctrl_init(bp);
+	if (err) {
+		free_irq(op->irqs[0], bp);
+		if (bp->i2c_bussel_reg)
+			of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
+		if (bp->i2c_control_regs)
+			of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
+		kfree(bp);
+	} else {
+		dev_set_drvdata(&op->dev, bp);
 	}
 
-	if (!index)
-		return -ENODEV;
-
-	err = bbc_envctrl_init();
-	if (err)
-		bbc_i2c_cleanup();
 	return err;
 }
 
-static void bbc_i2c_cleanup(void)
+static int __devexit bbc_i2c_remove(struct of_device *op)
 {
-	struct bbc_i2c_bus *bp = all_bbc_i2c;
+	struct bbc_i2c_bus *bp = dev_get_drvdata(&op->dev);
+
+	bbc_envctrl_cleanup(bp);
+
+	free_irq(op->irqs[0], bp);
 
-	bbc_envctrl_cleanup();
+	if (bp->i2c_bussel_reg)
+		of_iounmap(&op->resource[0], bp->i2c_bussel_reg, 1);
+	if (bp->i2c_control_regs)
+		of_iounmap(&op->resource[1], bp->i2c_control_regs, 2);
 
-	while (bp != NULL) {
-		struct bbc_i2c_bus *next = bp->next;
+	kfree(bp);
 
-		free_irq(bp->bus_edev->irqs[0], bp);
+	return 0;
+}
 
-		if (bp->i2c_bussel_reg)
-			iounmap(bp->i2c_bussel_reg);
-		if (bp->i2c_control_regs)
-			iounmap(bp->i2c_control_regs);
+static const struct of_device_id bbc_i2c_match[] = {
+	{
+		.name = "i2c",
+		.compatible = "SUNW,bbc-i2c",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, bbc_i2c_match);
 
-		kfree(bp);
+static struct of_platform_driver bbc_i2c_driver = {
+	.name		= "bbc_i2c",
+	.match_table	= bbc_i2c_match,
+	.probe		= bbc_i2c_probe,
+	.remove		= __devexit_p(bbc_i2c_remove),
+};
 
-		bp = next;
-	}
-	all_bbc_i2c = NULL;
+static int __init bbc_i2c_init(void)
+{
+	return of_register_driver(&bbc_i2c_driver, &of_bus_type);
+}
+
+static void __exit bbc_i2c_exit(void)
+{
+	of_unregister_driver(&bbc_i2c_driver);
 }
 
 module_init(bbc_i2c_init);
-module_exit(bbc_i2c_cleanup);
+module_exit(bbc_i2c_exit);
+
 MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/bbc_i2c.h b/drivers/sbus/char/bbc_i2c.h
index fb01bd17704..83c4811b7b5 100644
--- a/drivers/sbus/char/bbc_i2c.h
+++ b/drivers/sbus/char/bbc_i2c.h
@@ -1,14 +1,79 @@
-/* $Id: bbc_i2c.h,v 1.2 2001/04/02 09:59:25 davem Exp $ */
 #ifndef _BBC_I2C_H
 #define _BBC_I2C_H
 
-#include <asm/ebus.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/list.h>
 
-struct bbc_i2c_client;
+struct bbc_i2c_client {
+	struct bbc_i2c_bus		*bp;
+	struct of_device		*op;
+	int				bus;
+	int				address;
+};
+
+enum fan_action { FAN_SLOWER, FAN_SAME, FAN_FASTER, FAN_FULLBLAST, FAN_STATE_MAX };
+
+struct bbc_cpu_temperature {
+	struct list_head		bp_list;
+	struct list_head		glob_list;
+
+	struct bbc_i2c_client		*client;
+	int				index;
+
+	/* Current readings, and history. */
+	s8				curr_cpu_temp;
+	s8				curr_amb_temp;
+	s8				prev_cpu_temp;
+	s8				prev_amb_temp;
+	s8				avg_cpu_temp;
+	s8				avg_amb_temp;
+
+	int				sample_tick;
+
+	enum fan_action			fan_todo[2];
+#define FAN_AMBIENT	0
+#define FAN_CPU		1
+};
+
+struct bbc_fan_control {
+	struct list_head		bp_list;
+	struct list_head		glob_list;
+
+	struct bbc_i2c_client 		*client;
+	int 				index;
+
+	int				psupply_fan_on;
+	int				cpu_fan_speed;
+	int				system_fan_speed;
+};
+
+#define NUM_CHILDREN	8
+
+struct bbc_i2c_bus {
+	struct bbc_i2c_bus		*next;
+	int				index;
+	spinlock_t			lock;
+	void				__iomem *i2c_bussel_reg;
+	void				__iomem *i2c_control_regs;
+	unsigned char			own, clock;
+
+	wait_queue_head_t		wq;
+	volatile int			waiting;
+
+	struct list_head		temps;
+	struct list_head		fans;
+
+	struct of_device		*op;
+	struct {
+		struct of_device	*device;
+		int			client_claimed;
+	} devs[NUM_CHILDREN];
+};
 
 /* Probing and attachment. */
-extern struct linux_ebus_child *bbc_i2c_getdev(int);
-extern struct bbc_i2c_client *bbc_i2c_attach(struct linux_ebus_child *);
+extern struct of_device *bbc_i2c_getdev(struct bbc_i2c_bus *, int);
+extern struct bbc_i2c_client *bbc_i2c_attach(struct bbc_i2c_bus *bp, struct of_device *);
 extern void bbc_i2c_detach(struct bbc_i2c_client *);
 
 /* Register read/write.  NOTE: Blocking! */
diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c
deleted file mode 100644
index bba21e053a1..00000000000
--- a/drivers/sbus/char/bpp.c
+++ /dev/null
@@ -1,1055 +0,0 @@
-/*
- * drivers/sbus/char/bpp.c
- *
- * Copyright (c) 1995 Picture Elements
- *      Stephen Williams (steve@icarus.com)
- *      Gus Baldauf (gbaldauf@ix.netcom.com)
- *
- * Linux/SPARC port by Peter Zaitcev.
- * Integration into SPARC tree by Tom Dyas.
- */
-
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/timer.h>
-#include <linux/ioport.h>
-#include <linux/major.h>
-#include <linux/smp_lock.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#if defined(__i386__)
-# include <asm/system.h>
-#endif
-
-#if defined(__sparc__)
-# include <linux/init.h>
-# include <linux/delay.h>         /* udelay() */
-
-# include <asm/oplib.h>           /* OpenProm Library */
-# include <asm/sbus.h>
-#endif
-
-#include <asm/bpp.h>
-
-#define BPP_PROBE_CODE 0x55
-#define BPP_DELAY 100
-
-static const unsigned  BPP_MAJOR = LP_MAJOR;
-static const char *bpp_dev_name = "bpp";
-
-/* When switching from compatibility to a mode where I can read, try
-   the following mode first. */
-
-/* const unsigned char DEFAULT_ECP = 0x10; */
-static const unsigned char DEFAULT_ECP = 0x30;
-static const unsigned char DEFAULT_NIBBLE = 0x00;
-
-/*
- * These are 1284 time constraints, in units of jiffies.
- */
-
-static const unsigned long TIME_PSetup = 1;
-static const unsigned long TIME_PResponse = 6;
-static const unsigned long TIME_IDLE_LIMIT = 2000;
-
-/*
- * One instance per supported subdevice...
- */
-# define BPP_NO 3
-
-enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP };
-
-struct inst {
-      unsigned present  : 1; /* True if the hardware exists */
-      unsigned enhanced : 1; /* True if the hardware in "enhanced" */
-      unsigned opened   : 1; /* True if the device is opened already */
-      unsigned run_flag : 1; /* True if waiting for a repeate byte */
-
-      unsigned char direction; /* 0 --> out, 0x20 --> IN */
-      unsigned char pp_state; /* State of host controlled pins. */
-      enum IEEE_Mode mode;
-
-      unsigned char run_length;
-      unsigned char repeat_byte;
-};
-
-static struct inst instances[BPP_NO];
-
-#if defined(__i386__)
-
-static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc };
-
-/*
- * These are for data access.
- * Control lines accesses are hidden in set_bits() and get_bits().
- * The exception is the probe procedure, which is system-dependent.
- */
-#define bpp_outb_p(data, base)  outb_p((data), (base))
-#define bpp_inb(base)  inb(base)
-#define bpp_inb_p(base)  inb_p(base)
-
-/*
- * This method takes the pin values mask and sets the hardware pins to
- * the requested value: 1 == high voltage, 0 == low voltage. This
- * burries the annoying PC bit inversion and preserves the direction
- * flag.
- */
-static void set_pins(unsigned short pins, unsigned minor)
-{
-      unsigned char bits = instances[minor].direction;  /* == 0x20 */
-
-      if (! (pins & BPP_PP_nStrobe))   bits |= 1;
-      if (! (pins & BPP_PP_nAutoFd))   bits |= 2;
-      if (   pins & BPP_PP_nInit)      bits |= 4;
-      if (! (pins & BPP_PP_nSelectIn)) bits |= 8;
-
-      instances[minor].pp_state = bits;
-
-      outb_p(bits, base_addrs[minor]+2);
-}
-
-static unsigned short get_pins(unsigned minor)
-{
-      unsigned short bits = 0;
-
-      unsigned value = instances[minor].pp_state;
-      if (! (value & 0x01)) bits |= BPP_PP_nStrobe;
-      if (! (value & 0x02)) bits |= BPP_PP_nAutoFd;
-      if (value & 0x04)     bits |= BPP_PP_nInit;
-      if (! (value & 0x08)) bits |= BPP_PP_nSelectIn;
-
-      value = inb_p(base_addrs[minor]+1);
-      if (value & 0x08)     bits |= BPP_GP_nFault;
-      if (value & 0x10)     bits |= BPP_GP_Select;
-      if (value & 0x20)     bits |= BPP_GP_PError;
-      if (value & 0x40)     bits |= BPP_GP_nAck;
-      if (! (value & 0x80)) bits |= BPP_GP_Busy;
-
-      return bits;
-}
-
-#endif /* __i386__ */
-
-#if defined(__sparc__)
-
-/*
- * Register block
- */
-      /* DMA registers */
-#define BPP_CSR      0x00
-#define BPP_ADDR     0x04
-#define BPP_BCNT     0x08
-#define BPP_TST_CSR  0x0C
-      /* Parallel Port registers */
-#define BPP_HCR      0x10
-#define BPP_OCR      0x12
-#define BPP_DR       0x14
-#define BPP_TCR      0x15
-#define BPP_OR       0x16
-#define BPP_IR       0x17
-#define BPP_ICR      0x18
-#define BPP_SIZE     0x1A
-
-/* BPP_CSR.  Bits of type RW1 are cleared with writing '1'. */
-#define P_DEV_ID_MASK   0xf0000000      /* R   */
-#define P_DEV_ID_ZEBRA  0x40000000
-#define P_DEV_ID_L64854 0xa0000000      /*      == NCR 89C100+89C105. Pity. */
-#define P_NA_LOADED     0x08000000      /* R    NA wirtten but was not used */
-#define P_A_LOADED      0x04000000      /* R    */
-#define P_DMA_ON        0x02000000      /* R    DMA is not disabled */
-#define P_EN_NEXT       0x01000000      /* RW   */
-#define P_TCI_DIS       0x00800000      /* RW   TCI forbidden from interrupts */
-#define P_DIAG          0x00100000      /* RW   Disables draining and resetting
-                                                of P-FIFO on loading of P_ADDR*/
-#define P_BURST_SIZE    0x000c0000      /* RW   SBus burst size */
-#define P_BURST_8       0x00000000
-#define P_BURST_4       0x00040000
-#define P_BURST_1       0x00080000      /*      "No burst" write */
-#define P_TC            0x00004000      /* RW1  Term Count, can be cleared when
-                                           P_EN_NEXT=1 */
-#define P_EN_CNT        0x00002000      /* RW   */
-#define P_EN_DMA        0x00000200      /* RW   */
-#define P_WRITE         0x00000100      /* R    DMA dir, 1=to ram, 0=to port */
-#define P_RESET         0x00000080      /* RW   */
-#define P_SLAVE_ERR     0x00000040      /* RW1  Access size error */
-#define P_INVALIDATE    0x00000020      /* W    Drop P-FIFO */
-#define P_INT_EN        0x00000010      /* RW   OK to P_INT_PEND||P_ERR_PEND */
-#define P_DRAINING      0x0000000c      /* R    P-FIFO is draining to memory */
-#define P_ERR_PEND      0x00000002      /* R    */
-#define P_INT_PEND      0x00000001      /* R    */
-
-/* BPP_HCR. Time is in increments of SBus clock. */
-#define P_HCR_TEST      0x8000      /* Allows buried counters to be read */
-#define P_HCR_DSW       0x7f00      /* Data strobe width (in ticks) */
-#define P_HCR_DDS       0x007f      /* Data setup before strobe (in ticks) */
-
-/* BPP_OCR. */
-#define P_OCR_MEM_CLR   0x8000
-#define P_OCR_DATA_SRC  0x4000      /* )                  */
-#define P_OCR_DS_DSEL   0x2000      /* )  Bidirectional      */
-#define P_OCR_BUSY_DSEL 0x1000      /* )    selects            */
-#define P_OCR_ACK_DSEL  0x0800      /* )                  */
-#define P_OCR_EN_DIAG   0x0400
-#define P_OCR_BUSY_OP   0x0200      /* Busy operation */
-#define P_OCR_ACK_OP    0x0100      /* Ack operation */
-#define P_OCR_SRST      0x0080      /* Reset state machines. Not selfcleaning. */
-#define P_OCR_IDLE      0x0008      /* PP data transfer state machine is idle */
-#define P_OCR_V_ILCK    0x0002      /* Versatec faded. Zebra only. */
-#define P_OCR_EN_VER    0x0001      /* Enable Versatec (0 - enable). Zebra only. */
-
-/* BPP_TCR */
-#define P_TCR_DIR       0x08
-#define P_TCR_BUSY      0x04
-#define P_TCR_ACK       0x02
-#define P_TCR_DS        0x01        /* Strobe */
-
-/* BPP_OR */
-#define P_OR_V3         0x20        /* )                 */
-#define P_OR_V2         0x10        /* ) on Zebra only   */
-#define P_OR_V1         0x08        /* )                 */
-#define P_OR_INIT       0x04
-#define P_OR_AFXN       0x02        /* Auto Feed */
-#define P_OR_SLCT_IN    0x01
-
-/* BPP_IR */
-#define P_IR_PE         0x04
-#define P_IR_SLCT       0x02
-#define P_IR_ERR        0x01
-
-/* BPP_ICR */
-#define P_DS_IRQ        0x8000      /* RW1  */
-#define P_ACK_IRQ       0x4000      /* RW1  */
-#define P_BUSY_IRQ      0x2000      /* RW1  */
-#define P_PE_IRQ        0x1000      /* RW1  */
-#define P_SLCT_IRQ      0x0800      /* RW1  */
-#define P_ERR_IRQ       0x0400      /* RW1  */
-#define P_DS_IRQ_EN     0x0200      /* RW   Always on rising edge */
-#define P_ACK_IRQ_EN    0x0100      /* RW   Always on rising edge */
-#define P_BUSY_IRP      0x0080      /* RW   1= rising edge */
-#define P_BUSY_IRQ_EN   0x0040      /* RW   */
-#define P_PE_IRP        0x0020      /* RW   1= rising edge */
-#define P_PE_IRQ_EN     0x0010      /* RW   */
-#define P_SLCT_IRP      0x0008      /* RW   1= rising edge */
-#define P_SLCT_IRQ_EN   0x0004      /* RW   */
-#define P_ERR_IRP       0x0002      /* RW1  1= rising edge */
-#define P_ERR_IRQ_EN    0x0001      /* RW   */
-
-static void __iomem *base_addrs[BPP_NO];
-
-#define bpp_outb_p(data, base)	sbus_writeb(data, (base) + BPP_DR)
-#define bpp_inb_p(base)		sbus_readb((base) + BPP_DR)
-#define bpp_inb(base)		sbus_readb((base) + BPP_DR)
-
-static void set_pins(unsigned short pins, unsigned minor)
-{
-      void __iomem *base = base_addrs[minor];
-      unsigned char bits_tcr = 0, bits_or = 0;
-
-      if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR;
-      if (   pins & BPP_PP_nStrobe)          bits_tcr |= P_TCR_DS;
-
-      if (   pins & BPP_PP_nAutoFd)          bits_or |= P_OR_AFXN;
-      if (! (pins & BPP_PP_nInit))           bits_or |= P_OR_INIT;
-      if (! (pins & BPP_PP_nSelectIn))       bits_or |= P_OR_SLCT_IN;
-
-      sbus_writeb(bits_or, base + BPP_OR);
-      sbus_writeb(bits_tcr, base + BPP_TCR);
-}
-
-/*
- * i386 people read output pins from a software image.
- * We may get them back from hardware.
- * Again, inversion of pins must he buried here.
- */
-static unsigned short get_pins(unsigned minor)
-{
-      void __iomem *base = base_addrs[minor];
-      unsigned short bits = 0;
-      unsigned value_tcr = sbus_readb(base + BPP_TCR);
-      unsigned value_ir = sbus_readb(base + BPP_IR);
-      unsigned value_or = sbus_readb(base + BPP_OR);
-
-      if (value_tcr & P_TCR_DS)         bits |= BPP_PP_nStrobe;
-      if (value_or & P_OR_AFXN)         bits |= BPP_PP_nAutoFd;
-      if (! (value_or & P_OR_INIT))     bits |= BPP_PP_nInit;
-      if (! (value_or & P_OR_SLCT_IN))  bits |= BPP_PP_nSelectIn;
-
-      if (value_ir & P_IR_ERR)          bits |= BPP_GP_nFault;
-      if (! (value_ir & P_IR_SLCT))     bits |= BPP_GP_Select;
-      if (! (value_ir & P_IR_PE))       bits |= BPP_GP_PError;
-      if (! (value_tcr & P_TCR_ACK))    bits |= BPP_GP_nAck;
-      if (value_tcr & P_TCR_BUSY)       bits |= BPP_GP_Busy;
-
-      return bits;
-}
-
-#endif /* __sparc__ */
-
-static void snooze(unsigned long snooze_time, unsigned minor)
-{
-	schedule_timeout_uninterruptible(snooze_time + 1);
-}
-
-static int wait_for(unsigned short set, unsigned short clr,
-               unsigned long delay, unsigned minor)
-{
-      unsigned short pins = get_pins(minor);
-
-      unsigned long extime = 0;
-
-      /*
-       * Try a real fast scan for the first jiffy, in case the device
-       * responds real good. The first while loop guesses an expire
-       * time accounting for possible wraparound of jiffies.
-       */
-      while (time_after_eq(jiffies, extime)) extime = jiffies + 1;
-      while ( (time_before(jiffies, extime))
-              && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-            pins = get_pins(minor);
-      }
-
-      delay -= 1;
-
-      /*
-       * If my delay expired or the pins are still not where I want
-       * them, then resort to using the timer and greatly reduce my
-       * sample rate. If the peripheral is going to be slow, this will
-       * give the CPU up to some more worthy process.
-       */
-      while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) {
-
-            snooze(1, minor);
-            pins = get_pins(minor);
-            delay -= 1;
-      }
-
-      if (delay == 0) return -1;
-      else return pins;
-}
-
-/*
- * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An
- * errno means something broke, and I do not yet know how to fix it.
- */
-static int negotiate(unsigned char mode, unsigned minor)
-{
-      int rc;
-      unsigned short pins = get_pins(minor);
-      if (pins & BPP_PP_nSelectIn) return -EIO;
-
-
-        /* Event 0: Write the mode to the data lines */
-      bpp_outb_p(mode, base_addrs[minor]);
-
-      snooze(TIME_PSetup, minor);
-
-        /* Event 1: Strobe the mode code into the peripheral */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Event 2: Peripheral responds as a 1284 device. */
-      rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault,
-                BPP_GP_nAck,
-                TIME_PResponse,
-                minor);
-
-      if (rc == -1) return -ETIMEDOUT;
-
-        /* Event 3: latch extensibility request */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor);
-
-        /* ... quick nap while peripheral ponders the byte i'm sending...*/
-      snooze(1, minor);
-
-        /* Event 4: restore strobe, to ACK peripheral's response. */
-      set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Event 6: Peripheral latches response bits */
-      rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor);
-      if (rc == -1) return -EIO;
-
-        /* A 1284 device cannot refuse nibble mode */
-      if (mode == DEFAULT_NIBBLE) return 0;
-
-      if (pins & BPP_GP_Select) return 0;
-
-      return -EPROTONOSUPPORT;
-}
-
-static int terminate(unsigned minor)
-{
-      int rc;
-
-        /* Event 22: Request termination of 1284 mode */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Wait for Events 23 and 24: ACK termination request. */
-      rc = wait_for(BPP_GP_Busy|BPP_GP_nFault,
-                BPP_GP_nAck,
-                TIME_PSetup+TIME_PResponse,
-                minor);
-
-      instances[minor].direction = 0;
-      instances[minor].mode = COMPATIBILITY;
-
-      if (rc == -1) {
-          return -EIO;
-      }
-
-        /* Event 25: Handshake by lowering nAutoFd */
-      set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-        /* Event 26: Peripheral wiggles lines... */
-
-        /* Event 27: Peripheral sets nAck HIGH to ack handshake */
-      rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-      if (rc == -1) {
-          set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-          return -EIO;
-      }
-
-        /* Event 28: Finish phase by raising nAutoFd */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor);
-
-      return 0;
-}
-
-static DEFINE_SPINLOCK(bpp_open_lock);
-
-/*
- * Allow only one process to open the device at a time.
- */
-static int bpp_open(struct inode *inode, struct file *f)
-{
-      unsigned minor = iminor(inode);
-      int ret;
-
-      lock_kernel();
-      spin_lock(&bpp_open_lock);
-      ret = 0;
-      if (minor >= BPP_NO) {
-	      ret = -ENODEV;
-      } else {
-	      if (! instances[minor].present) {
-		      ret = -ENODEV;
-	      } else {
-		      if (instances[minor].opened) 
-			      ret = -EBUSY;
-		      else
-			      instances[minor].opened = 1;
-	      }
-      }
-      spin_unlock(&bpp_open_lock);
-      unlock_kernel();
-
-      return ret;
-}
-
-/*
- * When the process closes the device, this method is called to clean
- * up and reset the hardware. Always leave the device in compatibility
- * mode as this is a reasonable place to clean up from messes made by
- * ioctls, or other mayhem.
- */
-static int bpp_release(struct inode *inode, struct file *f)
-{
-      unsigned minor = iminor(inode);
-
-      spin_lock(&bpp_open_lock);
-      instances[minor].opened = 0;
-
-      if (instances[minor].mode != COMPATIBILITY)
-	      terminate(minor);
-
-      spin_unlock(&bpp_open_lock);
-
-      return 0;
-}
-
-static long read_nibble(unsigned minor, char __user *c, unsigned long cnt)
-{
-      unsigned long remaining = cnt;
-      long rc;
-
-      while (remaining > 0) {
-          unsigned char byte = 0;
-          int pins;
-
-          /* Event 7: request nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
-          /* Wait for event 9: Peripher strobes first nibble */
-          pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
-          if (pins == -1) return -ETIMEDOUT;
-
-          /* Event 10: I handshake nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
-          if (pins & BPP_GP_nFault) byte |= 0x01;
-          if (pins & BPP_GP_Select) byte |= 0x02;
-          if (pins & BPP_GP_PError) byte |= 0x04;
-          if (pins & BPP_GP_Busy)   byte |= 0x08;
-
-          /* Wait for event 11: Peripheral handshakes nibble */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-
-          /* Event 7: request nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor);
-
-          /* Wait for event 9: Peripher strobes first nibble */
-          pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-          /* Event 10: I handshake nibble */
-          set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor);
-          if (pins & BPP_GP_nFault) byte |= 0x10;
-          if (pins & BPP_GP_Select) byte |= 0x20;
-          if (pins & BPP_GP_PError) byte |= 0x40;
-          if (pins & BPP_GP_Busy)   byte |= 0x80;
-
-          if (put_user(byte, c))
-		  return -EFAULT;
-          c += 1;
-          remaining -= 1;
-
-          /* Wait for event 11: Peripheral handshakes nibble */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-          if (rc == -1) return -EIO;
-      }
-
-      return cnt - remaining;
-}
-
-static long read_ecp(unsigned minor, char __user *c, unsigned long cnt)
-{
-      unsigned long remaining;
-      long rc;
-
-        /* Turn ECP mode from forward to reverse if needed. */
-      if (! instances[minor].direction) {
-          unsigned short pins = get_pins(minor);
-
-            /* Event 38: Turn the bus around */
-          instances[minor].direction = 0x20;
-          pins &= ~BPP_PP_nAutoFd;
-          set_pins(pins, minor);
-
-            /* Event 39: Set pins for reverse mode. */
-          snooze(TIME_PSetup, minor);
-          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
-            /* Wait for event 40: Peripheral ready to be strobed */
-          rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-      }
-
-      remaining = cnt;
-
-      while (remaining > 0) {
-
-            /* If there is a run length for a repeated byte, repeat */
-            /* that byte a few times. */
-          if (instances[minor].run_length && !instances[minor].run_flag) {
-
-              char buffer[128];
-              unsigned idx;
-              unsigned repeat = remaining < instances[minor].run_length
-                                     ? remaining
-                               : instances[minor].run_length;
-
-              for (idx = 0 ;  idx < repeat ;  idx += 1)
-                buffer[idx] = instances[minor].repeat_byte;
-
-              if (copy_to_user(c, buffer, repeat))
-		      return -EFAULT;
-              remaining -= repeat;
-              c += repeat;
-              instances[minor].run_length -= repeat;
-          }
-
-          if (remaining == 0) break;
-
-
-            /* Wait for Event 43: Data active on the bus. */
-          rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor);
-          if (rc == -1) break;
-
-          if (rc & BPP_GP_Busy) {
-                /* OK, this is data. read it in. */
-              unsigned char byte = bpp_inb(base_addrs[minor]);
-              if (put_user(byte, c))
-		      return -EFAULT;
-              c += 1;
-              remaining -= 1;
-
-              if (instances[minor].run_flag) {
-                  instances[minor].repeat_byte = byte;
-                  instances[minor].run_flag = 0;
-              }
-
-          } else {
-              unsigned char byte = bpp_inb(base_addrs[minor]);
-              if (byte & 0x80) {
-                  printk("bpp%d: "
-                         "Ignoring ECP channel %u from device.\n",
-                         minor, byte & 0x7f);
-              } else {
-                  instances[minor].run_length = byte;
-                  instances[minor].run_flag = 1;
-              }
-          }
-
-            /* Event 44: I got it. */
-          set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor);
-
-            /* Wait for event 45: peripheral handshake */
-          rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-             /* Event 46: Finish handshake */
-          set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor);
-
-      }
-
-
-      return cnt - remaining;
-}
-
-static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos)
-{
-      long rc;
-      unsigned minor = iminor(f->f_path.dentry->d_inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-      switch (instances[minor].mode) {
-
-        default:
-          if (instances[minor].mode != COMPATIBILITY)
-            terminate(minor);
-
-          if (instances[minor].enhanced) {
-              /* For now, do all reads with ECP-RLE mode */
-              unsigned short pins;
-
-              rc = negotiate(DEFAULT_ECP, minor);
-              if (rc < 0) break;
-
-              instances[minor].mode = ECP_RLE;
-
-              /* Event 30: set nAutoFd low to setup for ECP mode */
-              pins = get_pins(minor);
-              pins &= ~BPP_PP_nAutoFd;
-              set_pins(pins, minor);
-
-              /* Wait for Event 31: peripheral ready */
-              rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-              if (rc == -1) return -ETIMEDOUT;
-
-              rc = read_ecp(minor, c, cnt);
-
-          } else {
-              rc = negotiate(DEFAULT_NIBBLE, minor);
-              if (rc < 0) break;
-
-              instances[minor].mode = NIBBLE;
-
-              rc = read_nibble(minor, c, cnt);
-          }
-          break;
-
-        case NIBBLE:
-          rc = read_nibble(minor, c, cnt);
-          break;
-
-        case ECP:
-        case ECP_RLE:
-          rc = read_ecp(minor, c, cnt);
-          break;
-
-      }
-
-
-      return rc;
-}
-
-/*
- * Compatibility mode handshaking is a matter of writing data,
- * strobing it, and waiting for the printer to stop being busy.
- */
-static long write_compat(unsigned minor, const char __user *c, unsigned long cnt)
-{
-      long rc;
-      unsigned short pins = get_pins(minor);
-
-      unsigned long remaining = cnt;
-
-
-      while (remaining > 0) {
-            unsigned char byte;
-
-            if (get_user(byte, c))
-		    return -EFAULT;
-            c += 1;
-
-            rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor);
-            if (rc == -1) return -ETIMEDOUT;
-
-            bpp_outb_p(byte, base_addrs[minor]);
-            remaining -= 1;
-          /* snooze(1, minor); */
-
-          pins &= ~BPP_PP_nStrobe;
-          set_pins(pins, minor);
-
-          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-
-          pins |= BPP_PP_nStrobe;
-          set_pins(pins, minor);
-      }
-
-      return cnt - remaining;
-}
-
-/*
- * Write data using ECP mode. Watch out that the port may be set up
- * for reading. If so, turn the port around.
- */
-static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt)
-{
-      unsigned short pins = get_pins(minor);
-      unsigned long remaining = cnt;
-
-      if (instances[minor].direction) {
-          int rc;
-
-            /* Event 47 Request bus be turned around */
-          pins |= BPP_PP_nInit;
-          set_pins(pins, minor);
-
-            /* Wait for Event 49: Peripheral relinquished bus */
-          rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor);
-
-          pins |= BPP_PP_nAutoFd;
-          instances[minor].direction = 0;
-          set_pins(pins, minor);
-      }
-
-      while (remaining > 0) {
-          unsigned char byte;
-          int rc;
-
-          if (get_user(byte, c))
-		  return -EFAULT;
-
-          rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor);
-          if (rc == -1) return -ETIMEDOUT;
-
-          c += 1;
-
-          bpp_outb_p(byte, base_addrs[minor]);
-
-          pins &= ~BPP_PP_nStrobe;
-          set_pins(pins, minor);
-
-          pins |= BPP_PP_nStrobe;
-          rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor);
-          if (rc == -1) return -EIO;
-
-          set_pins(pins, minor);
-      }
-
-      return cnt - remaining;
-}
-
-/*
- * Write to the peripheral. Be sensitive of the current mode. If I'm
- * in a mode that can be turned around (ECP) then just do
- * that. Otherwise, terminate and do my writing in compat mode. This
- * is the safest course as any device can handle it.
- */
-static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos)
-{
-      long errno = 0;
-      unsigned minor = iminor(f->f_path.dentry->d_inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-      switch (instances[minor].mode) {
-
-        case ECP:
-        case ECP_RLE:
-          errno = write_ecp(minor, c, cnt);
-          break;
-        case COMPATIBILITY:
-          errno = write_compat(minor, c, cnt);
-          break;
-        default:
-          terminate(minor);
-          errno = write_compat(minor, c, cnt);
-      }
-
-      return errno;
-}
-
-static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd,
-		 unsigned long arg)
-{
-      int errno = 0;
-
-      unsigned minor = iminor(inode);
-      if (minor >= BPP_NO) return -ENODEV;
-      if (!instances[minor].present) return -ENODEV;
-
-
-      switch (cmd) {
-
-        case BPP_PUT_PINS:
-          set_pins(arg, minor);
-          break;
-
-        case BPP_GET_PINS:
-          errno = get_pins(minor);
-          break;
-
-        case BPP_PUT_DATA:
-          bpp_outb_p(arg, base_addrs[minor]);
-          break;
-
-        case BPP_GET_DATA:
-          errno = bpp_inb_p(base_addrs[minor]);
-          break;
-
-        case BPP_SET_INPUT:
-          if (arg)
-            if (instances[minor].enhanced) {
-                unsigned short bits = get_pins(minor);
-                instances[minor].direction = 0x20;
-                set_pins(bits, minor);
-            } else {
-                errno = -ENOTTY;
-            }
-          else {
-              unsigned short bits = get_pins(minor);
-              instances[minor].direction = 0x00;
-              set_pins(bits, minor);
-          }
-          break;
-
-        default:
-            errno = -EINVAL;
-      }
-
-      return errno;
-}
-
-static const struct file_operations bpp_fops = {
-	.owner =	THIS_MODULE,
-	.read =		bpp_read,
-	.write =	bpp_write,
-	.ioctl =	bpp_ioctl,
-	.open =		bpp_open,
-	.release =	bpp_release,
-};
-
-#if defined(__i386__)
-
-#define collectLptPorts()  {}
-
-static void probeLptPort(unsigned idx)
-{
-      unsigned int testvalue;
-      const unsigned short lpAddr = base_addrs[idx];
-
-      instances[idx].present = 0;
-      instances[idx].enhanced = 0;
-      instances[idx].direction = 0;
-      instances[idx].mode = COMPATIBILITY;
-      instances[idx].run_length = 0;
-      instances[idx].run_flag = 0;
-      if (!request_region(lpAddr,3, bpp_dev_name)) return;
-
-      /*
-       * First, make sure the instance exists. Do this by writing to
-       * the data latch and reading the value back. If the port *is*
-       * present, test to see if it supports extended-mode
-       * operation. This will be required for IEEE1284 reverse
-       * transfers.
-       */
-
-      outb_p(BPP_PROBE_CODE, lpAddr);
-      for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-            ;
-      testvalue = inb_p(lpAddr);
-      if (testvalue == BPP_PROBE_CODE) {
-            unsigned save;
-            instances[idx].present = 1;
-
-            save = inb_p(lpAddr+2);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            outb_p(save|0x20, lpAddr+2);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            outb_p(~BPP_PROBE_CODE, lpAddr);
-            for (testvalue=0; testvalue<BPP_DELAY; testvalue++)
-                  ;
-            testvalue = inb_p(lpAddr);
-            if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE))
-                  instances[idx].enhanced = 0;
-            else
-                  instances[idx].enhanced = 1;
-            outb_p(save, lpAddr+2);
-      }
-      else {
-            release_region(lpAddr,3);
-      }
-      /*
-       * Leave the port in compat idle mode.
-       */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
-      printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx],
-            instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE");
-}
-
-static inline void freeLptPort(int idx)
-{
-      release_region(base_addrs[idx], 3);
-}
-
-#endif
-
-#if defined(__sparc__)
-
-static void __iomem *map_bpp(struct sbus_dev *dev, int idx)
-{
-      return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp");
-}
-
-static int collectLptPorts(void)
-{
-	struct sbus_bus *bus;
-	struct sbus_dev *dev;
-	int count;
-
-	count = 0;
-	for_all_sbusdev(dev, bus) {
-		if (strcmp(dev->prom_name, "SUNW,bpp") == 0) {
-			if (count >= BPP_NO) {
-				printk(KERN_NOTICE
-				       "bpp: More than %d bpp ports,"
-				       " rest is ignored\n", BPP_NO);
-				return count;
-			}
-			base_addrs[count] = map_bpp(dev, count);
-			count++;
-		}
-	}
-	return count;
-}
-
-static void probeLptPort(unsigned idx)
-{
-      void __iomem *rp = base_addrs[idx];
-      __u32 csr;
-      char *brand;
-
-      instances[idx].present = 0;
-      instances[idx].enhanced = 0;
-      instances[idx].direction = 0;
-      instances[idx].mode = COMPATIBILITY;
-      instances[idx].run_length = 0;
-      instances[idx].run_flag = 0;
-
-      if (!rp) return;
-
-      instances[idx].present = 1;
-      instances[idx].enhanced = 1;   /* Sure */
-
-      csr = sbus_readl(rp + BPP_CSR);
-      if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
-            udelay(20);
-            csr = sbus_readl(rp + BPP_CSR);
-            if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) {
-                  printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr);
-            }
-      }
-      printk("bpp%d: reset with 0x%08x ..", idx, csr);
-      sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR);
-      udelay(500);
-      sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR);
-      csr = sbus_readl(rp + BPP_CSR);
-      printk(" done with csr=0x%08x ocr=0x%04x\n",
-         csr, sbus_readw(rp + BPP_OCR));
-
-      switch (csr & P_DEV_ID_MASK) {
-      case P_DEV_ID_ZEBRA:
-            brand = "Zebra";
-            break;
-      case P_DEV_ID_L64854:
-            brand = "DMA2";
-            break;
-      default:
-            brand = "Unknown";
-      }
-      printk("bpp%d: %s at %p\n", idx, brand, rp);
-
-      /*
-       * Leave the port in compat idle mode.
-       */
-      set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx);
-
-      return;
-}
-
-static inline void freeLptPort(int idx)
-{
-      sbus_iounmap(base_addrs[idx], BPP_SIZE);
-}
-
-#endif
-
-static int __init bpp_init(void)
-{
-	int rc;
-	unsigned idx;
-
-	rc = collectLptPorts();
-	if (rc == 0)
-		return -ENODEV;
-
-	rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops);
-	if (rc < 0)
-		return rc;
-
-	for (idx = 0; idx < BPP_NO; idx++) {
-		instances[idx].opened = 0;
-		probeLptPort(idx);
-	}
-
-	return 0;
-}
-
-static void __exit bpp_cleanup(void)
-{
-	unsigned idx;
-
-	unregister_chrdev(BPP_MAJOR, bpp_dev_name);
-
-	for (idx = 0;  idx < BPP_NO; idx++) {
-		if (instances[idx].present)
-			freeLptPort(idx);
-	}
-}
-
-module_init(bpp_init);
-module_exit(bpp_cleanup);
-
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/sbus/char/cpwatchdog.c b/drivers/sbus/char/cpwatchdog.c
deleted file mode 100644
index 23abfdfb44f..00000000000
--- a/drivers/sbus/char/cpwatchdog.c
+++ /dev/null
@@ -1,858 +0,0 @@
-/* cpwatchdog.c - driver implementation for hardware watchdog
- * timers found on Sun Microsystems CP1400 and CP1500 boards.
- *
- * This device supports both the generic Linux watchdog 
- * interface and Solaris-compatible ioctls as best it is
- * able.
- *
- * NOTE: 	CP1400 systems appear to have a defective intr_mask
- * 			register on the PLD, preventing the disabling of
- * 			timer interrupts.  We use a timer to periodically 
- * 			reset 'stopped' watchdogs on affected platforms.
- *
- * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/major.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timer.h>
-#include <linux/smp_lock.h>
-#include <linux/io.h>
-#include <asm/irq.h>
-#include <asm/ebus.h>
-#include <asm/oplib.h>
-#include <asm/uaccess.h>
-
-#include <asm/watchdog.h>
-
-#define WD_OBPNAME	"watchdog"
-#define WD_BADMODEL "SUNW,501-5336"
-#define WD_BTIMEOUT	(jiffies + (HZ * 1000))
-#define WD_BLIMIT	0xFFFF
-
-#define WD0_DEVNAME "watchdog0"
-#define WD1_DEVNAME "watchdog1"
-#define WD2_DEVNAME "watchdog2"
-
-#define WD0_MINOR	212
-#define WD1_MINOR	213	
-#define WD2_MINOR	214	
-
-
-/* Internal driver definitions
- */
-#define WD0_ID			0		/* Watchdog0						*/
-#define WD1_ID			1		/* Watchdog1						*/
-#define WD2_ID			2		/* Watchdog2						*/
-#define WD_NUMDEVS		3		/* Device contains 3 timers			*/
-
-#define WD_INTR_OFF		0		/* Interrupt disable value			*/
-#define WD_INTR_ON		1		/* Interrupt enable value			*/
-
-#define WD_STAT_INIT	0x01	/* Watchdog timer is initialized	*/
-#define WD_STAT_BSTOP	0x02	/* Watchdog timer is brokenstopped	*/
-#define WD_STAT_SVCD	0x04	/* Watchdog interrupt occurred		*/
-
-/* Register value definitions
- */
-#define WD0_INTR_MASK	0x01	/* Watchdog device interrupt masks	*/
-#define WD1_INTR_MASK	0x02
-#define WD2_INTR_MASK	0x04
-
-#define WD_S_RUNNING	0x01	/* Watchdog device status running	*/
-#define WD_S_EXPIRED	0x02	/* Watchdog device status expired	*/
-
-/* Sun uses Altera PLD EPF8820ATC144-4 
- * providing three hardware watchdogs:
- *
- * 	1) RIC - sends an interrupt when triggered
- * 	2) XIR - asserts XIR_B_RESET when triggered, resets CPU
- * 	3) POR - asserts POR_B_RESET when triggered, resets CPU, backplane, board
- *
- *** Timer register block definition (struct wd_timer_regblk)
- *
- * dcntr and limit registers (halfword access):      
- * -------------------
- * | 15 | ...| 1 | 0 |
- * -------------------
- * |-  counter val  -|
- * -------------------
- * dcntr - 	Current 16-bit downcounter value.
- * 			When downcounter reaches '0' watchdog expires.
- * 			Reading this register resets downcounter with 'limit' value.
- * limit - 	16-bit countdown value in 1/10th second increments.
- * 			Writing this register begins countdown with input value.
- * 			Reading from this register does not affect counter.
- * NOTES:	After watchdog reset, dcntr and limit contain '1'
- *
- * status register (byte access):
- * ---------------------------
- * | 7 | ... | 2 |  1  |  0  |
- * --------------+------------
- * |-   UNUSED  -| EXP | RUN |
- * ---------------------------
- * status-	Bit 0 - Watchdog is running
- * 			Bit 1 - Watchdog has expired
- *
- *** PLD register block definition (struct wd_pld_regblk)
- *
- * intr_mask register (byte access):
- * ---------------------------------
- * | 7 | ... | 3 |  2  |  1  |  0  |
- * +-------------+------------------
- * |-   UNUSED  -| WD3 | WD2 | WD1 |
- * ---------------------------------
- * WD3 -  1 == Interrupt disabled for watchdog 3
- * WD2 -  1 == Interrupt disabled for watchdog 2
- * WD1 -  1 == Interrupt disabled for watchdog 1
- *
- * pld_status register (byte access):
- * UNKNOWN, MAGICAL MYSTERY REGISTER
- *
- */
-#define WD_TIMER_REGSZ	16
-#define WD0_OFF		0
-#define WD1_OFF		(WD_TIMER_REGSZ * 1)
-#define WD2_OFF		(WD_TIMER_REGSZ * 2)
-#define PLD_OFF		(WD_TIMER_REGSZ * 3)
-
-#define WD_DCNTR	0x00
-#define WD_LIMIT	0x04
-#define WD_STATUS	0x08
-
-#define PLD_IMASK	(PLD_OFF + 0x00)
-#define PLD_STATUS	(PLD_OFF + 0x04)
-
-/* Individual timer structure 
- */
-struct wd_timer {
-	__u16			timeout;
-	__u8			intr_mask;
-	unsigned char		runstatus;
-	void __iomem		*regs;
-};
-
-/* Device structure
- */
-struct wd_device {
-	int				irq;
-	spinlock_t		lock;
-	unsigned char	isbaddoggie;	/* defective PLD */
-	unsigned char	opt_enable;
-	unsigned char	opt_reboot;
-	unsigned short	opt_timeout;
-	unsigned char	initialized;
-	struct wd_timer	watchdog[WD_NUMDEVS];
-	void __iomem	*regs;
-};
-
-static struct wd_device wd_dev = { 
-		0, __SPIN_LOCK_UNLOCKED(wd_dev.lock), 0, 0, 0, 0,
-};
-
-static struct timer_list wd_timer;
-
-static int wd0_timeout = 0;
-static int wd1_timeout = 0;
-static int wd2_timeout = 0;
-
-#ifdef MODULE
-module_param	(wd0_timeout, int, 0);
-MODULE_PARM_DESC(wd0_timeout, "Default watchdog0 timeout in 1/10secs");
-module_param 	(wd1_timeout, int, 0);
-MODULE_PARM_DESC(wd1_timeout, "Default watchdog1 timeout in 1/10secs");
-module_param 	(wd2_timeout, int, 0);
-MODULE_PARM_DESC(wd2_timeout, "Default watchdog2 timeout in 1/10secs");
-
-MODULE_AUTHOR
-	("Eric Brower <ebrower@usa.net>");
-MODULE_DESCRIPTION
-	("Hardware watchdog driver for Sun Microsystems CP1400/1500");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE
-	("watchdog");
-#endif /* ifdef MODULE */
-
-/* Forward declarations of internal methods
- */
-#ifdef WD_DEBUG
-static void wd_dumpregs(void);
-#endif
-static irqreturn_t wd_interrupt(int irq, void *dev_id);
-static void wd_toggleintr(struct wd_timer* pTimer, int enable);
-static void wd_pingtimer(struct wd_timer* pTimer);
-static void wd_starttimer(struct wd_timer* pTimer);
-static void wd_resetbrokentimer(struct wd_timer* pTimer);
-static void wd_stoptimer(struct wd_timer* pTimer);
-static void wd_brokentimer(unsigned long data);
-static int  wd_getstatus(struct wd_timer* pTimer);
-
-/* PLD expects words to be written in LSB format,
- * so we must flip all words prior to writing them to regs
- */
-static inline unsigned short flip_word(unsigned short word)
-{
-	return ((word & 0xff) << 8) | ((word >> 8) & 0xff);
-}
-
-#define wd_writew(val, addr) 	(writew(flip_word(val), addr))
-#define wd_readw(addr) 			(flip_word(readw(addr)))
-#define wd_writeb(val, addr) 	(writeb(val, addr))
-#define wd_readb(addr) 			(readb(addr))
-
-
-/* CP1400s seem to have broken PLD implementations--
- * the interrupt_mask register cannot be written, so
- * no timer interrupts can be masked within the PLD.
- */
-static inline int wd_isbroken(void)
-{
-	/* we could test this by read/write/read/restore
-	 * on the interrupt mask register only if OBP
-	 * 'watchdog-enable?' == FALSE, but it seems 
-	 * ubiquitous on CP1400s
-	 */
-	char val[32];
-	prom_getproperty(prom_root_node, "model", val, sizeof(val));
-	return((!strcmp(val, WD_BADMODEL)) ? 1 : 0);
-}
-		
-/* Retrieve watchdog-enable? option from OBP
- * Returns 0 if false, 1 if true
- */
-static inline int wd_opt_enable(void)
-{
-	int opt_node;
-
-	opt_node = prom_getchild(prom_root_node);
-	opt_node = prom_searchsiblings(opt_node, "options");
-	return((-1 == prom_getint(opt_node, "watchdog-enable?")) ? 0 : 1);
-}
-
-/* Retrieve watchdog-reboot? option from OBP
- * Returns 0 if false, 1 if true
- */
-static inline int wd_opt_reboot(void)
-{
-	int opt_node;
-
-	opt_node = prom_getchild(prom_root_node);
-	opt_node = prom_searchsiblings(opt_node, "options");
-	return((-1 == prom_getint(opt_node, "watchdog-reboot?")) ? 0 : 1);
-}
-
-/* Retrieve watchdog-timeout option from OBP
- * Returns OBP value, or 0 if not located
- */
-static inline int wd_opt_timeout(void)
-{
-	int opt_node;
-	char value[32];
-	char *p = value;
-
-	opt_node = prom_getchild(prom_root_node);
-	opt_node = prom_searchsiblings(opt_node, "options");
-	opt_node = prom_getproperty(opt_node, 
-								"watchdog-timeout", 
-								value, 
-								sizeof(value));
-	if(-1 != opt_node) {
-		/* atoi implementation */
-		for(opt_node = 0; /* nop */; p++) {
-			if(*p >= '0' && *p <= '9') {
-				opt_node = (10*opt_node)+(*p-'0');
-			}
-			else {
-				break;
-			}
-		}
-	}
-	return((-1 == opt_node) ? (0) : (opt_node)); 
-}
-
-static int wd_open(struct inode *inode, struct file *f)
-{
-	lock_kernel();
-	switch(iminor(inode))
-	{
-		case WD0_MINOR:
-			f->private_data = &wd_dev.watchdog[WD0_ID];
-			break;
-		case WD1_MINOR:
-			f->private_data = &wd_dev.watchdog[WD1_ID];
-			break;
-		case WD2_MINOR:
-			f->private_data = &wd_dev.watchdog[WD2_ID];
-			break;
-		default:
-			unlock_kernel();
-			return(-ENODEV);
-	}
-
-	/* Register IRQ on first open of device */
-	if(0 == wd_dev.initialized)
-	{	
-		if (request_irq(wd_dev.irq, 
-						&wd_interrupt, 
-						IRQF_SHARED,
-						WD_OBPNAME,
-						(void *)wd_dev.regs)) {
-			printk("%s: Cannot register IRQ %d\n", 
-				WD_OBPNAME, wd_dev.irq);
-			unlock_kernel();
-			return(-EBUSY);
-		}
-		wd_dev.initialized = 1;
-	}
-
-	unlock_kernel();
-	return(nonseekable_open(inode, f));
-}
-
-static int wd_release(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static int wd_ioctl(struct inode *inode, struct file *file, 
-		     unsigned int cmd, unsigned long arg)
-{
-	int 	setopt 				= 0;
-	struct 	wd_timer* pTimer 	= (struct wd_timer*)file->private_data;
-	void __user *argp = (void __user *)arg;
-	struct 	watchdog_info info 	= {
-		0,
-		0,
-		"Altera EPF8820ATC144-4"
-	};
-
-	if(NULL == pTimer) {
-		return(-EINVAL);
-	}
-
-	switch(cmd)
-	{
-		/* Generic Linux IOCTLs */
-		case WDIOC_GETSUPPORT:
-			if(copy_to_user(argp, &info, sizeof(struct watchdog_info))) {
-				return(-EFAULT);
-			}
-			break;
-		case WDIOC_GETSTATUS:
-		case WDIOC_GETBOOTSTATUS:
-			if (put_user(0, (int __user *)argp))
-				return -EFAULT;
-			break;
-		case WDIOC_KEEPALIVE:
-			wd_pingtimer(pTimer);
-			break;
-		case WDIOC_SETOPTIONS:
-			if(copy_from_user(&setopt, argp, sizeof(unsigned int))) {
-				return -EFAULT;
-			}
-			if(setopt & WDIOS_DISABLECARD) {
-				if(wd_dev.opt_enable) {
-					printk(
-						"%s: cannot disable watchdog in ENABLED mode\n",
-						WD_OBPNAME);
-					return(-EINVAL);
-				}
-				wd_stoptimer(pTimer);
-			}
-			else if(setopt & WDIOS_ENABLECARD) {
-				wd_starttimer(pTimer);
-			}
-			else {
-				return(-EINVAL);
-			}	
-			break;
-		/* Solaris-compatible IOCTLs */
-		case WIOCGSTAT:
-			setopt = wd_getstatus(pTimer);
-			if(copy_to_user(argp, &setopt, sizeof(unsigned int))) {
-				return(-EFAULT);
-			}
-			break;
-		case WIOCSTART:
-			wd_starttimer(pTimer);
-			break;
-		case WIOCSTOP:
-			if(wd_dev.opt_enable) {
-				printk("%s: cannot disable watchdog in ENABLED mode\n",
-					WD_OBPNAME);
-				return(-EINVAL);
-			}
-			wd_stoptimer(pTimer);
-			break;
-		default:
-			return(-EINVAL);
-	}
-	return(0);
-}
-
-static long wd_compat_ioctl(struct file *file, unsigned int cmd,
-		unsigned long arg)
-{
-	int rval = -ENOIOCTLCMD;
-
-	switch (cmd) {
-	/* solaris ioctls are specific to this driver */
-	case WIOCSTART:
-	case WIOCSTOP:
-	case WIOCGSTAT:
-		lock_kernel();
-		rval = wd_ioctl(file->f_path.dentry->d_inode, file, cmd, arg);
-		unlock_kernel();
-		break;
-	/* everything else is handled by the generic compat layer */
-	default:
-		break;
-	}
-
-	return rval;
-}
-
-static ssize_t wd_write(struct file 	*file, 
-			const char	__user *buf, 
-			size_t 		count, 
-			loff_t 		*ppos)
-{
-	struct wd_timer* pTimer = (struct wd_timer*)file->private_data;
-
-	if(NULL == pTimer) {
-		return(-EINVAL);
-	}
-
-	if (count) {
-		wd_pingtimer(pTimer);
-		return 1;
-	}
-	return 0;
-}
-
-static ssize_t wd_read(struct file * file, char __user *buffer,
-		        size_t count, loff_t *ppos)
-{
-#ifdef WD_DEBUG
-	wd_dumpregs();
-	return(0);
-#else
-	return(-EINVAL);
-#endif /* ifdef WD_DEBUG */
-}
-
-static irqreturn_t wd_interrupt(int irq, void *dev_id)
-{
-	/* Only WD0 will interrupt-- others are NMI and we won't
-	 * see them here....
-	 */
-	spin_lock_irq(&wd_dev.lock);
-	if((unsigned long)wd_dev.regs == (unsigned long)dev_id)
-	{
-		wd_stoptimer(&wd_dev.watchdog[WD0_ID]);
-		wd_dev.watchdog[WD0_ID].runstatus |=  WD_STAT_SVCD;
-	}
-	spin_unlock_irq(&wd_dev.lock);
-	return IRQ_HANDLED;
-}
-
-static const struct file_operations wd_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	wd_ioctl,
-	.compat_ioctl =	wd_compat_ioctl,
-	.open =		wd_open,
-	.write =	wd_write,
-	.read =		wd_read,
-	.release =	wd_release,
-};
-
-static struct miscdevice wd0_miscdev = { WD0_MINOR, WD0_DEVNAME, &wd_fops };
-static struct miscdevice wd1_miscdev = { WD1_MINOR, WD1_DEVNAME, &wd_fops };
-static struct miscdevice wd2_miscdev = { WD2_MINOR, WD2_DEVNAME, &wd_fops };
-
-#ifdef WD_DEBUG
-static void wd_dumpregs(void)
-{
-	/* Reading from downcounters initiates watchdog countdown--
-	 * Example is included below for illustration purposes.
-	 */
-	int i;
-	printk("%s: dumping register values\n", WD_OBPNAME);
-	for(i = WD0_ID; i < WD_NUMDEVS; ++i) {
-			/* printk("\t%s%i: dcntr  at 0x%lx: 0x%x\n", 
-			 * 	WD_OBPNAME,
-		 	 *	i,
-			 *	(unsigned long)(&wd_dev.watchdog[i].regs->dcntr), 
-			 *	readw(&wd_dev.watchdog[i].regs->dcntr));
-			 */
-			printk("\t%s%i: limit  at 0x%lx: 0x%x\n", 
-				WD_OBPNAME,
-				i,
-				(unsigned long)(&wd_dev.watchdog[i].regs->limit), 
-				readw(&wd_dev.watchdog[i].regs->limit));
-			printk("\t%s%i: status at 0x%lx: 0x%x\n", 
-				WD_OBPNAME,
-				i,
-				(unsigned long)(&wd_dev.watchdog[i].regs->status), 
-				readb(&wd_dev.watchdog[i].regs->status));
-			printk("\t%s%i: driver status: 0x%x\n",
-				WD_OBPNAME,
-				i,
-				wd_getstatus(&wd_dev.watchdog[i]));
-	}
-	printk("\tintr_mask  at %p: 0x%x\n", 
-		wd_dev.regs + PLD_IMASK,
-		readb(wd_dev.regs + PLD_IMASK));
-	printk("\tpld_status at %p: 0x%x\n", 
-		wd_dev.regs + PLD_STATUS, 
-		readb(wd_dev.regs + PLD_STATUS));
-}
-#endif
-
-/* Enable or disable watchdog interrupts
- * Because of the CP1400 defect this should only be
- * called during initialzation or by wd_[start|stop]timer()
- *
- * pTimer 	- pointer to timer device, or NULL to indicate all timers 
- * enable	- non-zero to enable interrupts, zero to disable
- */
-static void wd_toggleintr(struct wd_timer* pTimer, int enable)
-{
-	unsigned char curregs = wd_readb(wd_dev.regs + PLD_IMASK);
-	unsigned char setregs = 
-		(NULL == pTimer) ? 
-			(WD0_INTR_MASK | WD1_INTR_MASK | WD2_INTR_MASK) : 
-			(pTimer->intr_mask);
-
-	(WD_INTR_ON == enable) ?
-		(curregs &= ~setregs):
-		(curregs |=  setregs);
-
-	wd_writeb(curregs, wd_dev.regs + PLD_IMASK);
-	return;
-}
-
-/* Reset countdown timer with 'limit' value and continue countdown.
- * This will not start a stopped timer.
- *
- * pTimer	- pointer to timer device
- */
-static void wd_pingtimer(struct wd_timer* pTimer)
-{
-	if (wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) {
-		wd_readw(pTimer->regs + WD_DCNTR);
-	}
-}
-
-/* Stop a running watchdog timer-- the timer actually keeps
- * running, but the interrupt is masked so that no action is
- * taken upon expiration.
- *
- * pTimer	- pointer to timer device
- */
-static void wd_stoptimer(struct wd_timer* pTimer)
-{
-	if(wd_readb(pTimer->regs + WD_STATUS) & WD_S_RUNNING) {
-		wd_toggleintr(pTimer, WD_INTR_OFF);
-
-		if(wd_dev.isbaddoggie) {
-			pTimer->runstatus |= WD_STAT_BSTOP;
-			wd_brokentimer((unsigned long)&wd_dev);
-		}
-	}
-}
-
-/* Start a watchdog timer with the specified limit value
- * If the watchdog is running, it will be restarted with
- * the provided limit value.
- *
- * This function will enable interrupts on the specified
- * watchdog.
- *
- * pTimer	- pointer to timer device
- * limit	- limit (countdown) value in 1/10th seconds
- */
-static void wd_starttimer(struct wd_timer* pTimer)
-{
-	if(wd_dev.isbaddoggie) {
-		pTimer->runstatus &= ~WD_STAT_BSTOP;
-	}
-	pTimer->runstatus &= ~WD_STAT_SVCD;
-
-	wd_writew(pTimer->timeout, pTimer->regs + WD_LIMIT);
-	wd_toggleintr(pTimer, WD_INTR_ON);
-}
-
-/* Restarts timer with maximum limit value and
- * does not unset 'brokenstop' value.
- */
-static void wd_resetbrokentimer(struct wd_timer* pTimer)
-{
-	wd_toggleintr(pTimer, WD_INTR_ON);
-	wd_writew(WD_BLIMIT, pTimer->regs + WD_LIMIT);
-}
-
-/* Timer device initialization helper.
- * Returns 0 on success, other on failure
- */
-static int wd_inittimer(int whichdog)
-{
-	struct miscdevice 				*whichmisc;
-	void __iomem *whichregs;
-	char 							whichident[8];
-	int								whichmask;
-	__u16							whichlimit;
-
-	switch(whichdog)
-	{
-		case WD0_ID:
-			whichmisc = &wd0_miscdev;
-			strcpy(whichident, "RIC");
-			whichregs = wd_dev.regs + WD0_OFF;
-			whichmask = WD0_INTR_MASK;
-			whichlimit= (0 == wd0_timeout) 	? 
-						(wd_dev.opt_timeout): 
-						(wd0_timeout);
-			break;
-		case WD1_ID:
-			whichmisc = &wd1_miscdev;
-			strcpy(whichident, "XIR");
-			whichregs = wd_dev.regs + WD1_OFF;
-			whichmask = WD1_INTR_MASK;
-			whichlimit= (0 == wd1_timeout) 	? 
-						(wd_dev.opt_timeout): 
-						(wd1_timeout);
-			break;
-		case WD2_ID:
-			whichmisc = &wd2_miscdev;
-			strcpy(whichident, "POR");
-			whichregs = wd_dev.regs + WD2_OFF;
-			whichmask = WD2_INTR_MASK;
-			whichlimit= (0 == wd2_timeout) 	? 
-						(wd_dev.opt_timeout): 
-						(wd2_timeout);
-			break;
-		default:
-			printk("%s: %s: invalid watchdog id: %i\n",
-				WD_OBPNAME, __func__, whichdog);
-			return(1);
-	}
-	if(0 != misc_register(whichmisc))
-	{
-		return(1);
-	}
-	wd_dev.watchdog[whichdog].regs			= whichregs;
-	wd_dev.watchdog[whichdog].timeout 		= whichlimit;
-	wd_dev.watchdog[whichdog].intr_mask		= whichmask;
-	wd_dev.watchdog[whichdog].runstatus 	&= ~WD_STAT_BSTOP;
-	wd_dev.watchdog[whichdog].runstatus 	|= WD_STAT_INIT;
-
-	printk("%s%i: %s hardware watchdog [%01i.%i sec] %s\n", 
-		WD_OBPNAME, 
-		whichdog, 
-		whichident, 
-		wd_dev.watchdog[whichdog].timeout / 10,
-		wd_dev.watchdog[whichdog].timeout % 10,
-		(0 != wd_dev.opt_enable) ? "in ENABLED mode" : "");
-	return(0);
-}
-
-/* Timer method called to reset stopped watchdogs--
- * because of the PLD bug on CP1400, we cannot mask
- * interrupts within the PLD so me must continually
- * reset the timers ad infinitum.
- */
-static void wd_brokentimer(unsigned long data)
-{
-	struct wd_device* pDev = (struct wd_device*)data;
-	int id, tripped = 0;
-
-	/* kill a running timer instance, in case we
-	 * were called directly instead of by kernel timer
-	 */
-	if(timer_pending(&wd_timer)) {
-		del_timer(&wd_timer);
-	}
-
-	for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
-		if(pDev->watchdog[id].runstatus & WD_STAT_BSTOP) {
-			++tripped;
-			wd_resetbrokentimer(&pDev->watchdog[id]);
-		}
-	}
-
-	if(tripped) {
-		/* there is at least one timer brokenstopped-- reschedule */
-		init_timer(&wd_timer);
-		wd_timer.expires = WD_BTIMEOUT;
-		add_timer(&wd_timer);
-	}
-}
-
-static int wd_getstatus(struct wd_timer* pTimer)
-{
-	unsigned char stat = wd_readb(pTimer->regs + WD_STATUS);
-	unsigned char intr = wd_readb(wd_dev.regs + PLD_IMASK);
-	unsigned char ret  = WD_STOPPED;
-
-	/* determine STOPPED */
-	if(0 == stat ) { 
-		return(ret);
-	}
-	/* determine EXPIRED vs FREERUN vs RUNNING */
-	else if(WD_S_EXPIRED & stat) {
-		ret = WD_EXPIRED;
-	}
-	else if(WD_S_RUNNING & stat) {
-		if(intr & pTimer->intr_mask) {
-			ret = WD_FREERUN;
-		}
-		else {
-			/* Fudge WD_EXPIRED status for defective CP1400--
-			 * IF timer is running 
-			 * 	AND brokenstop is set 
-			 * 	AND an interrupt has been serviced
-			 * we are WD_EXPIRED.
-			 *
-			 * IF timer is running 
-			 * 	AND brokenstop is set 
-			 * 	AND no interrupt has been serviced
-			 * we are WD_FREERUN.
-			 */
-			if(wd_dev.isbaddoggie && (pTimer->runstatus & WD_STAT_BSTOP)) {
-				if(pTimer->runstatus & WD_STAT_SVCD) {
-					ret = WD_EXPIRED;
-				}
-				else {
-					/* we could as well pretend we are expired */
-					ret = WD_FREERUN;
-				}
-			}
-			else {
-				ret = WD_RUNNING;
-			}
-		}
-	}
-
-	/* determine SERVICED */
-	if(pTimer->runstatus & WD_STAT_SVCD) {
-		ret |= WD_SERVICED;
-	}
-
-	return(ret);
-}
-
-static int __init wd_init(void)
-{
-	int 	id;
-	struct 	linux_ebus *ebus = NULL;
-	struct 	linux_ebus_device *edev = NULL;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->ofdev.node->name, WD_OBPNAME))
-				goto ebus_done;
-		}
-	}
-
-ebus_done:
-	if(!edev) {
-		printk("%s: unable to locate device\n", WD_OBPNAME);
-		return -ENODEV;
-	}
-
-	wd_dev.regs = 
-		ioremap(edev->resource[0].start, 4 * WD_TIMER_REGSZ); /* ? */
-
-	if(NULL == wd_dev.regs) {
-		printk("%s: unable to map registers\n", WD_OBPNAME);
-		return(-ENODEV);
-	}
-
-	/* initialize device structure from OBP parameters */
-	wd_dev.irq 			= edev->irqs[0];
-	wd_dev.opt_enable	= wd_opt_enable();
-	wd_dev.opt_reboot	= wd_opt_reboot();
-	wd_dev.opt_timeout	= wd_opt_timeout();
-	wd_dev.isbaddoggie	= wd_isbroken();
-
-	/* disable all interrupts unless watchdog-enabled? == true */
-	if(! wd_dev.opt_enable) {
-		wd_toggleintr(NULL, WD_INTR_OFF);
-	}
-
-	/* register miscellaneous devices */
-	for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
-		if(0 != wd_inittimer(id)) {
-			printk("%s%i: unable to initialize\n", WD_OBPNAME, id);
-		}
-	}
-
-	/* warn about possible defective PLD */
-	if(wd_dev.isbaddoggie) {
-		init_timer(&wd_timer);
-		wd_timer.function 	= wd_brokentimer;
-		wd_timer.data		= (unsigned long)&wd_dev;
-		wd_timer.expires	= WD_BTIMEOUT;
-
-		printk("%s: PLD defect workaround enabled for model %s\n",
-			WD_OBPNAME, WD_BADMODEL);
-	}
-	return(0);
-}
-
-static void __exit wd_cleanup(void)
-{
-	int id;
-
-	/* if 'watchdog-enable?' == TRUE, timers are not stopped 
-	 * when module is unloaded.  All brokenstopped timers will
-	 * also now eventually trip. 
-	 */
-	for(id = WD0_ID; id < WD_NUMDEVS; ++id) {
-		if(WD_S_RUNNING == wd_readb(wd_dev.watchdog[id].regs + WD_STATUS)) {
-			if(wd_dev.opt_enable) {
-				printk(KERN_WARNING "%s%i: timer not stopped at release\n",
-					WD_OBPNAME, id);
-			}
-			else {
-				wd_stoptimer(&wd_dev.watchdog[id]);
-				if(wd_dev.watchdog[id].runstatus & WD_STAT_BSTOP) {
-					wd_resetbrokentimer(&wd_dev.watchdog[id]);
-					printk(KERN_WARNING 
-							"%s%i: defect workaround disabled at release, "\
-							"timer expires in ~%01i sec\n",
-							WD_OBPNAME, id, 
-							wd_readw(wd_dev.watchdog[id].regs + WD_LIMIT) / 10);
-				}
-			}
-		}
-	}
-
-	if(wd_dev.isbaddoggie && timer_pending(&wd_timer)) {
-		del_timer(&wd_timer);
-	}
-	if(0 != (wd_dev.watchdog[WD0_ID].runstatus & WD_STAT_INIT)) {
-		misc_deregister(&wd0_miscdev);
-	}
-	if(0 != (wd_dev.watchdog[WD1_ID].runstatus & WD_STAT_INIT)) {
-		misc_deregister(&wd1_miscdev);
-	}
-	if(0 != (wd_dev.watchdog[WD2_ID].runstatus & WD_STAT_INIT)) {
-		misc_deregister(&wd2_miscdev);
-	}
-	if(0 != wd_dev.initialized) {
-		free_irq(wd_dev.irq, (void *)wd_dev.regs);
-	}
-	iounmap(wd_dev.regs);
-}
-
-module_init(wd_init);
-module_exit(wd_cleanup);
diff --git a/drivers/sbus/char/display7seg.c b/drivers/sbus/char/display7seg.c
index d8f5c0ca236..2550af4ae43 100644
--- a/drivers/sbus/char/display7seg.c
+++ b/drivers/sbus/char/display7seg.c
@@ -1,10 +1,7 @@
-/* $Id: display7seg.c,v 1.6 2002/01/08 16:00:16 davem Exp $
- *
- * display7seg - Driver implementation for the 7-segment display
- * present on Sun Microsystems CP1400 and CP1500
+/* display7seg.c - Driver implementation for the 7-segment display
+ *                 present on Sun Microsystems CP1400 and CP1500
  *
  * Copyright (c) 2000 Eric Brower (ebrower@usa.net)
- *
  */
 
 #include <linux/kernel.h>
@@ -16,22 +13,20 @@
 #include <linux/miscdevice.h>
 #include <linux/ioport.h>		/* request_region */
 #include <linux/smp_lock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <asm/atomic.h>
-#include <asm/ebus.h>			/* EBus device					*/
-#include <asm/oplib.h>			/* OpenProm Library 			*/
 #include <asm/uaccess.h>		/* put_/get_user			*/
 #include <asm/io.h>
 
 #include <asm/display7seg.h>
 
 #define D7S_MINOR	193
-#define D7S_OBPNAME	"display7seg"
-#define D7S_DEVNAME "d7s"
+#define DRIVER_NAME	"d7s"
+#define PFX		DRIVER_NAME ": "
 
 static int sol_compat = 0;		/* Solaris compatibility mode	*/
 
-#ifdef MODULE
-
 /* Solaris compatibility flag -
  * The Solaris implementation omits support for several
  * documented driver features (ref Sun doc 806-0180-03).  
@@ -46,20 +41,20 @@ static int sol_compat = 0;		/* Solaris compatibility mode	*/
  * If you wish the device to operate as under Solaris,
  * omitting above features, set this parameter to non-zero.
  */
-module_param
-	(sol_compat, int, 0);
-MODULE_PARM_DESC
-	(sol_compat, 
-	 "Disables documented functionality omitted from Solaris driver");
-
-MODULE_AUTHOR
-	("Eric Brower <ebrower@usa.net>");
-MODULE_DESCRIPTION
-	("7-Segment Display driver for Sun Microsystems CP1400/1500");
+module_param(sol_compat, int, 0);
+MODULE_PARM_DESC(sol_compat, 
+		 "Disables documented functionality omitted from Solaris driver");
+
+MODULE_AUTHOR("Eric Brower <ebrower@usa.net>");
+MODULE_DESCRIPTION("7-Segment Display driver for Sun Microsystems CP1400/1500");
 MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE
-	("d7s");
-#endif /* ifdef MODULE */
+MODULE_SUPPORTED_DEVICE("d7s");
+
+struct d7s {
+	void __iomem	*regs;
+	bool		flipped;
+};
+struct d7s *d7s_device;
 
 /*
  * Register block address- see header for details
@@ -72,22 +67,6 @@ MODULE_SUPPORTED_DEVICE
  * FLIP		- Inverts display for upside-down mounted board
  * bits 0-4	- 7-segment display contents
  */
-static void __iomem* d7s_regs;
-
-static inline void d7s_free(void)
-{
-	iounmap(d7s_regs);
-}
-
-static inline int d7s_obpflipped(void)
-{
-	int opt_node;
-
-	opt_node = prom_getchild(prom_root_node);
-	opt_node = prom_searchsiblings(opt_node, "options");
-	return ((-1 != prom_getintdefault(opt_node, "d7s-flipped?", -1)) ? 0 : 1);
-}
-
 static atomic_t d7s_users = ATOMIC_INIT(0);
 
 static int d7s_open(struct inode *inode, struct file *f)
@@ -106,12 +85,15 @@ static int d7s_release(struct inode *inode, struct file *f)
 	 * are not operating in solaris-compat mode
 	 */
 	if (atomic_dec_and_test(&d7s_users) && !sol_compat) {
-		int regval = 0;
-
-		regval = readb(d7s_regs);
-		(0 == d7s_obpflipped())	? 
-			writeb(regval |= D7S_FLIP,  d7s_regs): 
-			writeb(regval &= ~D7S_FLIP, d7s_regs);
+		struct d7s *p = d7s_device;
+		u8 regval = 0;
+
+		regval = readb(p->regs);
+		if (p->flipped)
+			regval |= D7S_FLIP;
+		else
+			regval &= ~D7S_FLIP;
+		writeb(regval, p->regs);
 	}
 
 	return 0;
@@ -119,9 +101,10 @@ static int d7s_release(struct inode *inode, struct file *f)
 
 static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 {
-	__u8 regs = readb(d7s_regs);
-	__u8 ireg = 0;
+	struct d7s *p = d7s_device;
+	u8 regs = readb(p->regs);
 	int error = 0;
+	u8 ireg = 0;
 
 	if (D7S_MINOR != iminor(file->f_path.dentry->d_inode))
 		return -ENODEV;
@@ -129,18 +112,20 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	lock_kernel();
 	switch (cmd) {
 	case D7SIOCWR:
-		/* assign device register values
-		 * we mask-out D7S_FLIP if in sol_compat mode
+		/* assign device register values we mask-out D7S_FLIP
+		 * if in sol_compat mode
 		 */
 		if (get_user(ireg, (int __user *) arg)) {
 			error = -EFAULT;
 			break;
 		}
-		if (0 != sol_compat) {
-			(regs & D7S_FLIP) ? 
-				(ireg |= D7S_FLIP) : (ireg &= ~D7S_FLIP);
+		if (sol_compat) {
+			if (regs & D7S_FLIP)
+				ireg |= D7S_FLIP;
+			else
+				ireg &= ~D7S_FLIP;
 		}
-		writeb(ireg, d7s_regs);
+		writeb(ireg, p->regs);
 		break;
 
 	case D7SIOCRD:
@@ -158,9 +143,11 @@ static long d7s_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 
 	case D7SIOCTM:
 		/* toggle device mode-- flip display orientation */
-		(regs & D7S_FLIP) ? 
-			(regs &= ~D7S_FLIP) : (regs |= D7S_FLIP);
-		writeb(regs, d7s_regs);
+		if (regs & D7S_FLIP)
+			regs &= ~D7S_FLIP;
+		else
+			regs |= D7S_FLIP;
+		writeb(regs, p->regs);
 		break;
 	};
 	unlock_kernel();
@@ -176,69 +163,123 @@ static const struct file_operations d7s_fops = {
 	.release =		d7s_release,
 };
 
-static struct miscdevice d7s_miscdev = { D7S_MINOR, D7S_DEVNAME, &d7s_fops };
+static struct miscdevice d7s_miscdev = {
+	.minor		= D7S_MINOR,
+	.name		= DRIVER_NAME,
+	.fops		= &d7s_fops
+};
 
-static int __init d7s_init(void)
+static int __devinit d7s_probe(struct of_device *op,
+			       const struct of_device_id *match)
 {
-	struct linux_ebus *ebus = NULL;
-	struct linux_ebus_device *edev = NULL;
-	int iTmp = 0, regs = 0;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_node->name, D7S_OBPNAME))
-				goto ebus_done;
-		}
+	struct device_node *opts;
+	int err = -EINVAL;
+	struct d7s *p;
+	u8 regs;
+
+	if (d7s_device)
+		goto out;
+
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	err = -ENOMEM;
+	if (!p)
+		goto out;
+
+	p->regs = of_ioremap(&op->resource[0], 0, sizeof(u8), "d7s");
+	if (!p->regs) {
+		printk(KERN_ERR PFX "Cannot map chip registers\n");
+		goto out_free;
 	}
 
-ebus_done:
-	if(!edev) {
-		printk("%s: unable to locate device\n", D7S_DEVNAME);
-		return -ENODEV;
+	err = misc_register(&d7s_miscdev);
+	if (err) {
+		printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n",
+		       D7S_MINOR);
+		goto out_iounmap;
 	}
 
-	d7s_regs = ioremap(edev->resource[0].start, sizeof(__u8));
-
-	iTmp = misc_register(&d7s_miscdev);
-	if (0 != iTmp) {
-		printk("%s: unable to acquire miscdevice minor %i\n",
-		       D7S_DEVNAME, D7S_MINOR);
-		iounmap(d7s_regs);
-		return iTmp;
-	}
-
-	/* OBP option "d7s-flipped?" is honored as default
-	 * for the device, and reset default when detached
+	/* OBP option "d7s-flipped?" is honored as default for the
+	 * device, and reset default when detached
 	 */
-	regs = readb(d7s_regs);
-	iTmp = d7s_obpflipped();
-	(0 == iTmp) ? 
-		writeb(regs |= D7S_FLIP,  d7s_regs): 
-		writeb(regs &= ~D7S_FLIP, d7s_regs);
-
-	printk("%s: 7-Segment Display%s at 0x%lx %s\n", 
-	       D7S_DEVNAME,
-	       (0 == iTmp) ? (" (FLIPPED)") : (""),
-	       edev->resource[0].start,
-	       (0 != sol_compat) ? ("in sol_compat mode") : (""));
-
-	return 0;
+	regs = readb(p->regs);
+	opts = of_find_node_by_path("/options");
+	if (opts &&
+	    of_get_property(opts, "d7s-flipped?", NULL))
+		p->flipped = true;
+
+	if (p->flipped)
+		regs |= D7S_FLIP;
+	else
+		regs &= ~D7S_FLIP;
+
+	writeb(regs,  p->regs);
+
+	printk(KERN_INFO PFX "7-Segment Display%s at [%s:0x%lx] %s\n", 
+	       op->node->full_name,
+	       (regs & D7S_FLIP) ? " (FLIPPED)" : "",
+	       op->resource[0].start,
+	       sol_compat ? "in sol_compat mode" : "");
+
+	dev_set_drvdata(&op->dev, p);
+	d7s_device = p;
+	err = 0;
+
+out:
+	return err;
+
+out_iounmap:
+	of_iounmap(&op->resource[0], p->regs, sizeof(u8));
+
+out_free:
+	kfree(p);
+	goto out;
 }
 
-static void __exit d7s_cleanup(void)
+static int __devexit d7s_remove(struct of_device *op)
 {
-	int regs = readb(d7s_regs);
+	struct d7s *p = dev_get_drvdata(&op->dev);
+	u8 regs = readb(p->regs);
 
 	/* Honor OBP d7s-flipped? unless operating in solaris-compat mode */
-	if (0 == sol_compat) {
-		(0 == d7s_obpflipped())	? 
-			writeb(regs |= D7S_FLIP,  d7s_regs):
-			writeb(regs &= ~D7S_FLIP, d7s_regs);
+	if (sol_compat) {
+		if (p->flipped)
+			regs |= D7S_FLIP;
+		else
+			regs &= ~D7S_FLIP;
+		writeb(regs, p->regs);
 	}
 
 	misc_deregister(&d7s_miscdev);
-	d7s_free();
+	of_iounmap(&op->resource[0], p->regs, sizeof(u8));
+	kfree(p);
+
+	return 0;
+}
+
+static const struct of_device_id d7s_match[] = {
+	{
+		.name = "display7seg",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, d7s_match);
+
+static struct of_platform_driver d7s_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= d7s_match,
+	.probe		= d7s_probe,
+	.remove		= __devexit_p(d7s_remove),
+};
+
+static int __init d7s_init(void)
+{
+	return of_register_driver(&d7s_driver, &of_bus_type);
+}
+
+static void __exit d7s_exit(void)
+{
+	of_unregister_driver(&d7s_driver);
 }
 
 module_init(d7s_init);
-module_exit(d7s_cleanup);
+module_exit(d7s_exit);
diff --git a/drivers/sbus/char/envctrl.c b/drivers/sbus/char/envctrl.c
index a408402426f..58e583b61e6 100644
--- a/drivers/sbus/char/envctrl.c
+++ b/drivers/sbus/char/envctrl.c
@@ -1,5 +1,4 @@
-/* $Id: envctrl.c,v 1.25 2002/01/15 09:01:26 davem Exp $
- * envctrl.c: Temperature and Fan monitoring on Machines providing it.
+/* envctrl.c: Temperature and Fan monitoring on Machines providing it.
  *
  * Copyright (C) 1998  Eddie C. Dost  (ecd@skynet.be)
  * Copyright (C) 2000  Vinh Truong    (vinh.truong@eng.sun.com)
@@ -28,12 +27,16 @@
 #include <linux/kmod.h>
 #include <linux/reboot.h>
 #include <linux/smp_lock.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
-#include <asm/ebus.h>
 #include <asm/uaccess.h>
 #include <asm/envctrl.h>
 #include <asm/io.h>
 
+#define DRIVER_NAME	"envctrl"
+#define PFX		DRIVER_NAME ": "
+
 #define ENVCTRL_MINOR	162
 
 #define PCF8584_ADDRESS	0x55
@@ -193,7 +196,7 @@ static void envtrl_i2c_test_pin(void)
 	} 
 
 	if (limit <= 0)
-		printk(KERN_INFO "envctrl: Pin status will not clear.\n");
+		printk(KERN_INFO PFX "Pin status will not clear.\n");
 }
 
 /* Function Description: Test busy bit.
@@ -211,7 +214,7 @@ static void envctrl_i2c_test_bb(void)
 	} 
 
 	if (limit <= 0)
-		printk(KERN_INFO "envctrl: Busy bit will not clear.\n");
+		printk(KERN_INFO PFX "Busy bit will not clear.\n");
 }
 
 /* Function Description: Send the address for a read access.
@@ -858,11 +861,10 @@ static void envctrl_init_voltage_status(struct i2c_child_t *pchild)
 /* Function Description: Initialize i2c child device.
  * Return: None.
  */
-static void envctrl_init_i2c_child(struct linux_ebus_child *edev_child,
+static void envctrl_init_i2c_child(struct device_node *dp,
 				   struct i2c_child_t *pchild)
 {
 	int len, i, tbls_size = 0;
-	struct device_node *dp = edev_child->prom_node;
 	const void *pval;
 
 	/* Get device address. */
@@ -882,12 +884,12 @@ static void envctrl_init_i2c_child(struct linux_ebus_child *edev_child,
 
                 pchild->tables = kmalloc(tbls_size, GFP_KERNEL);
 		if (pchild->tables == NULL){
-			printk("envctrl: Failed to allocate table.\n");
+			printk(KERN_ERR PFX "Failed to allocate table.\n");
 			return;
 		}
 		pval = of_get_property(dp, "tables", &len);
                 if (!pval || len <= 0) {
-			printk("envctrl: Failed to get table.\n");
+			printk(KERN_ERR PFX "Failed to get table.\n");
 			return;
 		}
 		memcpy(pchild->tables, pval, len);
@@ -993,14 +995,14 @@ static int kenvctrld(void *__unused)
 	struct i2c_child_t *cputemp;
 
 	if (NULL == (cputemp = envctrl_get_i2c_child(ENVCTRL_CPUTEMP_MON))) {
-		printk(KERN_ERR 
-		       "envctrl: kenvctrld unable to monitor CPU temp-- exiting\n");
+		printk(KERN_ERR  PFX
+		       "kenvctrld unable to monitor CPU temp-- exiting\n");
 		return -ENODEV;
 	}
 
 	poll_interval = 5000; /* TODO env_mon_interval */
 
-	printk(KERN_INFO "envctrl: %s starting...\n", current->comm);
+	printk(KERN_INFO PFX "%s starting...\n", current->comm);
 	for (;;) {
 		msleep_interruptible(poll_interval);
 
@@ -1022,54 +1024,35 @@ static int kenvctrld(void *__unused)
 			}
 		}
 	}
-	printk(KERN_INFO "envctrl: %s exiting...\n", current->comm);
+	printk(KERN_INFO PFX "%s exiting...\n", current->comm);
 	return 0;
 }
 
-static int __init envctrl_init(void)
+static int __devinit envctrl_probe(struct of_device *op,
+				   const struct of_device_id *match)
 {
-	struct linux_ebus *ebus = NULL;
-	struct linux_ebus_device *edev = NULL;
-	struct linux_ebus_child *edev_child = NULL;
-	int err, i = 0;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_node->name, "bbc")) {
-				/* If we find a boot-bus controller node,
-				 * then this envctrl driver is not for us.
-				 */
-				return -ENODEV;
-			}
-		}
-	}
+	struct device_node *dp;
+	int index, err;
 
-	/* Traverse through ebus and ebus device list for i2c device and
-	 * adc and gpio nodes.
-	 */
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->prom_node->name, "i2c")) {
-				i2c = ioremap(edev->resource[0].start, 0x2);
-				for_each_edevchild(edev, edev_child) {
-					if (!strcmp("gpio", edev_child->prom_node->name)) {
-						i2c_childlist[i].i2ctype = I2C_GPIO;
-						envctrl_init_i2c_child(edev_child, &(i2c_childlist[i++]));
-					}
-					if (!strcmp("adc", edev_child->prom_node->name)) {
-						i2c_childlist[i].i2ctype = I2C_ADC;
-						envctrl_init_i2c_child(edev_child, &(i2c_childlist[i++]));
-					}
-				}
-				goto done;
-			}
+	if (i2c)
+		return -EINVAL;
+
+	i2c = of_ioremap(&op->resource[0], 0, 0x2, DRIVER_NAME);
+	if (!i2c)
+		return -ENOMEM;
+
+	index = 0;
+	dp = op->node->child;
+	while (dp) {
+		if (!strcmp(dp->name, "gpio")) {
+			i2c_childlist[index].i2ctype = I2C_GPIO;
+			envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
+		} else if (!strcmp(dp->name, "adc")) {
+			i2c_childlist[index].i2ctype = I2C_ADC;
+			envctrl_init_i2c_child(dp, &(i2c_childlist[index++]));
 		}
-	}
 
-done:
-	if (!edev) {
-		printk("envctrl: I2C device not found.\n");
-		return -ENODEV;
+		dp = dp->sibling;
 	}
 
 	/* Set device address. */
@@ -1087,7 +1070,7 @@ done:
 	/* Register the device as a minor miscellaneous device. */
 	err = misc_register(&envctrl_dev);
 	if (err) {
-		printk("envctrl: Unable to get misc minor %d\n",
+		printk(KERN_ERR PFX "Unable to get misc minor %d\n",
 		       envctrl_dev.minor);
 		goto out_iounmap;
 	}
@@ -1096,12 +1079,12 @@ done:
 	 * a next child device, so we decrement before reverse-traversal of
 	 * child devices.
 	 */
-	printk("envctrl: initialized ");
-	for (--i; i >= 0; --i) {
+	printk(KERN_INFO PFX "Initialized ");
+	for (--index; index >= 0; --index) {
 		printk("[%s 0x%lx]%s", 
-			(I2C_ADC == i2c_childlist[i].i2ctype) ? ("adc") : 
-			((I2C_GPIO == i2c_childlist[i].i2ctype) ? ("gpio") : ("unknown")), 
-			i2c_childlist[i].addr, (0 == i) ? ("\n") : (" "));
+			(I2C_ADC == i2c_childlist[index].i2ctype) ? "adc" : 
+			((I2C_GPIO == i2c_childlist[index].i2ctype) ? "gpio" : "unknown"), 
+			i2c_childlist[index].addr, (0 == index) ? "\n" : " ");
 	}
 
 	kenvctrld_task = kthread_run(kenvctrld, NULL, "kenvctrld");
@@ -1115,26 +1098,54 @@ done:
 out_deregister:
 	misc_deregister(&envctrl_dev);
 out_iounmap:
-	iounmap(i2c);
-	for (i = 0; i < ENVCTRL_MAX_CPU * 2; i++)
-		kfree(i2c_childlist[i].tables);
+	of_iounmap(&op->resource[0], i2c, 0x2);
+	for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
+		kfree(i2c_childlist[index].tables);
 
 	return err;
 }
 
-static void __exit envctrl_cleanup(void)
+static int __devexit envctrl_remove(struct of_device *op)
 {
-	int i;
+	int index;
 
 	kthread_stop(kenvctrld_task);
 
-	iounmap(i2c);
+	of_iounmap(&op->resource[0], i2c, 0x2);
 	misc_deregister(&envctrl_dev);
 
-	for (i = 0; i < ENVCTRL_MAX_CPU * 2; i++)
-		kfree(i2c_childlist[i].tables);
+	for (index = 0; index < ENVCTRL_MAX_CPU * 2; index++)
+		kfree(i2c_childlist[index].tables);
+
+	return 0;
+}
+
+static const struct of_device_id envctrl_match[] = {
+	{
+		.name = "i2c",
+		.compatible = "i2cpcf,8584",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, envctrl_match);
+
+static struct of_platform_driver envctrl_driver = {
+	.name		= DRIVER_NAME,
+	.match_table	= envctrl_match,
+	.probe		= envctrl_probe,
+	.remove		= __devexit_p(envctrl_remove),
+};
+
+static int __init envctrl_init(void)
+{
+	return of_register_driver(&envctrl_driver, &of_bus_type);
+}
+
+static void __exit envctrl_exit(void)
+{
+	of_unregister_driver(&envctrl_driver);
 }
 
 module_init(envctrl_init);
-module_exit(envctrl_cleanup);
+module_exit(envctrl_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/flash.c b/drivers/sbus/char/flash.c
index 7d95e151513..41083472ff4 100644
--- a/drivers/sbus/char/flash.c
+++ b/drivers/sbus/char/flash.c
@@ -1,5 +1,4 @@
-/* $Id: flash.c,v 1.25 2001/12/21 04:56:16 davem Exp $
- * flash.c: Allow mmap access to the OBP Flash, for OBP updates.
+/* flash.c: Allow mmap access to the OBP Flash, for OBP updates.
  *
  * Copyright (C) 1997  Eddie C. Dost  (ecd@skynet.be)
  */
@@ -15,13 +14,13 @@
 #include <linux/smp_lock.h>
 #include <linux/spinlock.h>
 #include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/pgtable.h>
 #include <asm/io.h>
-#include <asm/sbus.h>
-#include <asm/ebus.h>
 #include <asm/upa.h>
 
 static DEFINE_SPINLOCK(flash_lock);
@@ -161,97 +160,68 @@ static const struct file_operations flash_fops = {
 
 static struct miscdevice flash_dev = { FLASH_MINOR, "flash", &flash_fops };
 
-static int __init flash_init(void)
+static int __devinit flash_probe(struct of_device *op,
+				 const struct of_device_id *match)
 {
-	struct sbus_bus *sbus;
-	struct sbus_dev *sdev = NULL;
-#ifdef CONFIG_PCI
-	struct linux_ebus *ebus;
-	struct linux_ebus_device *edev = NULL;
-	struct linux_prom_registers regs[2];
-	int len, nregs;
-#endif
-	int err;
-
-	for_all_sbusdev(sdev, sbus) {
-		if (!strcmp(sdev->prom_name, "flashprom")) {
-			if (sdev->reg_addrs[0].phys_addr == sdev->reg_addrs[1].phys_addr) {
-				flash.read_base = ((unsigned long)sdev->reg_addrs[0].phys_addr) |
-					(((unsigned long)sdev->reg_addrs[0].which_io)<<32UL);
-				flash.read_size = sdev->reg_addrs[0].reg_size;
-				flash.write_base = flash.read_base;
-				flash.write_size = flash.read_size;
-			} else {
-				flash.read_base = ((unsigned long)sdev->reg_addrs[0].phys_addr) |
-					(((unsigned long)sdev->reg_addrs[0].which_io)<<32UL);
-				flash.read_size = sdev->reg_addrs[0].reg_size;
-				flash.write_base = ((unsigned long)sdev->reg_addrs[1].phys_addr) |
-					(((unsigned long)sdev->reg_addrs[1].which_io)<<32UL);
-				flash.write_size = sdev->reg_addrs[1].reg_size;
-			}
-			flash.busy = 0;
-			break;
-		}
-	}
-	if (!sdev) {
-#ifdef CONFIG_PCI
-		const struct linux_prom_registers *ebus_regs;
-
-		for_each_ebus(ebus) {
-			for_each_ebusdev(edev, ebus) {
-				if (!strcmp(edev->prom_node->name, "flashprom"))
-					goto ebus_done;
-			}
-		}
-	ebus_done:
-		if (!edev)
-			return -ENODEV;
-
-		ebus_regs = of_get_property(edev->prom_node, "reg", &len);
-		if (!ebus_regs || (len % sizeof(regs[0])) != 0) {
-			printk("flash: Strange reg property size %d\n", len);
-			return -ENODEV;
-		}
-
-		nregs = len / sizeof(ebus_regs[0]);
+	struct device_node *dp = op->node;
+	struct device_node *parent;
 
-		flash.read_base = edev->resource[0].start;
-		flash.read_size = ebus_regs[0].reg_size;
+	parent = dp->parent;
 
-		if (nregs == 1) {
-			flash.write_base = edev->resource[0].start;
-			flash.write_size = ebus_regs[0].reg_size;
-		} else if (nregs == 2) {
-			flash.write_base = edev->resource[1].start;
-			flash.write_size = ebus_regs[1].reg_size;
-		} else {
-			printk("flash: Strange number of regs %d\n", nregs);
-			return -ENODEV;
-		}
-
-		flash.busy = 0;
-
-#else
+	if (strcmp(parent->name, "sbus") &&
+	    strcmp(parent->name, "sbi") &&
+	    strcmp(parent->name, "ebus"))
 		return -ENODEV;
-#endif
+
+	flash.read_base = op->resource[0].start;
+	flash.read_size = resource_size(&op->resource[0]);
+	if (op->resource[1].flags) {
+		flash.write_base = op->resource[1].start;
+		flash.write_size = resource_size(&op->resource[1]);
+	} else {
+		flash.write_base = op->resource[0].start;
+		flash.write_size = resource_size(&op->resource[0]);
 	}
+	flash.busy = 0;
 
-	printk("OBP Flash: RD %lx[%lx] WR %lx[%lx]\n",
+	printk(KERN_INFO "%s: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n",
+	       op->node->full_name,
 	       flash.read_base, flash.read_size,
 	       flash.write_base, flash.write_size);
 
-	err = misc_register(&flash_dev);
-	if (err) {
-		printk(KERN_ERR "flash: unable to get misc minor\n");
-		return err;
-	}
+	return misc_register(&flash_dev);
+}
+
+static int __devexit flash_remove(struct of_device *op)
+{
+	misc_deregister(&flash_dev);
 
 	return 0;
 }
 
+static const struct of_device_id flash_match[] = {
+	{
+		.name = "flashprom",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, flash_match);
+
+static struct of_platform_driver flash_driver = {
+	.name		= "flash",
+	.match_table	= flash_match,
+	.probe		= flash_probe,
+	.remove		= __devexit_p(flash_remove),
+};
+
+static int __init flash_init(void)
+{
+	return of_register_driver(&flash_driver, &of_bus_type);
+}
+
 static void __exit flash_cleanup(void)
 {
-	misc_deregister(&flash_dev);
+	of_unregister_driver(&flash_driver);
 }
 
 module_init(flash_init);
diff --git a/drivers/sbus/char/riowatchdog.c b/drivers/sbus/char/riowatchdog.c
deleted file mode 100644
index 88c0fc6395e..00000000000
--- a/drivers/sbus/char/riowatchdog.c
+++ /dev/null
@@ -1,295 +0,0 @@
-/* $Id: riowatchdog.c,v 1.3.2.2 2002/01/23 18:48:02 davem Exp $
- * riowatchdog.c - driver for hw watchdog inside Super I/O of RIO
- *
- * Copyright (C) 2001 David S. Miller (davem@redhat.com)
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-#include <asm/io.h>
-#include <asm/ebus.h>
-#include <asm/bbc.h>
-#include <asm/oplib.h>
-#include <asm/uaccess.h>
-
-#include <asm/watchdog.h>
-
-/* RIO uses the NatSemi Super I/O power management logical device
- * as its' watchdog.
- *
- * When the watchdog triggers, it asserts a line to the BBC (Boot Bus
- * Controller) of the machine.  The BBC can only be configured to
- * trigger a power-on reset when the signal is asserted.  The BBC
- * can be configured to ignore the signal entirely as well.
- *
- * The only Super I/O device register we care about is at index
- * 0x05 (WDTO_INDEX) which is the watchdog time-out in minutes (1-255).
- * If set to zero, this disables the watchdog.  When set, the system
- * must periodically (before watchdog expires) clear (set to zero) and
- * re-set the watchdog else it will trigger.
- *
- * There are two other indexed watchdog registers inside this Super I/O
- * logical device, but they are unused.  The first, at index 0x06 is
- * the watchdog control and can be used to make the watchdog timer re-set
- * when the PS/2 mouse or serial lines show activity.  The second, at
- * index 0x07 is merely a sampling of the line from the watchdog to the
- * BBC.
- *
- * The watchdog device generates no interrupts.
- */
-
-MODULE_AUTHOR("David S. Miller <davem@redhat.com>");
-MODULE_DESCRIPTION("Hardware watchdog driver for Sun RIO");
-MODULE_SUPPORTED_DEVICE("watchdog");
-MODULE_LICENSE("GPL");
-
-#define RIOWD_NAME	"pmc"
-#define RIOWD_MINOR	215
-
-static DEFINE_SPINLOCK(riowd_lock);
-
-static void __iomem *bbc_regs;
-static void __iomem *riowd_regs;
-#define WDTO_INDEX	0x05
-
-static int riowd_timeout = 1;		/* in minutes */
-module_param(riowd_timeout, int, 0);
-MODULE_PARM_DESC(riowd_timeout, "Watchdog timeout in minutes");
-
-#if 0 /* Currently unused. */
-static u8 riowd_readreg(int index)
-{
-	unsigned long flags;
-	u8 ret;
-
-	spin_lock_irqsave(&riowd_lock, flags);
-	writeb(index, riowd_regs + 0);
-	ret = readb(riowd_regs + 1);
-	spin_unlock_irqrestore(&riowd_lock, flags);
-
-	return ret;
-}
-#endif
-
-static void riowd_writereg(u8 val, int index)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&riowd_lock, flags);
-	writeb(index, riowd_regs + 0);
-	writeb(val, riowd_regs + 1);
-	spin_unlock_irqrestore(&riowd_lock, flags);
-}
-
-static void riowd_pingtimer(void)
-{
-	riowd_writereg(riowd_timeout, WDTO_INDEX);
-}
-
-static void riowd_stoptimer(void)
-{
-	u8 val;
-
-	riowd_writereg(0, WDTO_INDEX);
-
-	val = readb(bbc_regs + BBC_WDACTION);
-	val &= ~BBC_WDACTION_RST;
-	writeb(val, bbc_regs + BBC_WDACTION);
-}
-
-static void riowd_starttimer(void)
-{
-	u8 val;
-
-	riowd_writereg(riowd_timeout, WDTO_INDEX);
-
-	val = readb(bbc_regs + BBC_WDACTION);
-	val |= BBC_WDACTION_RST;
-	writeb(val, bbc_regs + BBC_WDACTION);
-}
-
-static int riowd_open(struct inode *inode, struct file *filp)
-{
-	cycle_kernel_lock();
-	nonseekable_open(inode, filp);
-	return 0;
-}
-
-static int riowd_release(struct inode *inode, struct file *filp)
-{
-	return 0;
-}
-
-static int riowd_ioctl(struct inode *inode, struct file *filp,
-		       unsigned int cmd, unsigned long arg)
-{
-	static struct watchdog_info info = {
-	       	WDIOF_SETTIMEOUT, 0, "Natl. Semiconductor PC97317"
-	};
-	void __user *argp = (void __user *)arg;
-	unsigned int options;
-	int new_margin;
-
-	switch (cmd) {
-	case WDIOC_GETSUPPORT:
-		if (copy_to_user(argp, &info, sizeof(info)))
-			return -EFAULT;
-		break;
-
-	case WDIOC_GETSTATUS:
-	case WDIOC_GETBOOTSTATUS:
-		if (put_user(0, (int __user *)argp))
-			return -EFAULT;
-		break;
-
-	case WDIOC_KEEPALIVE:
-		riowd_pingtimer();
-		break;
-
-	case WDIOC_SETOPTIONS:
-		if (copy_from_user(&options, argp, sizeof(options)))
-			return -EFAULT;
-
-		if (options & WDIOS_DISABLECARD)
-			riowd_stoptimer();
-		else if (options & WDIOS_ENABLECARD)
-			riowd_starttimer();
-		else
-			return -EINVAL;
-
-		break;
-
-	case WDIOC_SETTIMEOUT:
-		if (get_user(new_margin, (int __user *)argp))
-			return -EFAULT;
-		if ((new_margin < 60) || (new_margin > (255 * 60)))
-		    return -EINVAL;
-		riowd_timeout = (new_margin + 59) / 60;
-		riowd_pingtimer();
-		/* Fall */
-
-	case WDIOC_GETTIMEOUT:
-		return put_user(riowd_timeout * 60, (int __user *)argp);
-
-	default:
-		return -EINVAL;
-	};
-
-	return 0;
-}
-
-static ssize_t riowd_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos)
-{
-	if (count) {
-		riowd_pingtimer();
-		return 1;
-	}
-
-	return 0;
-}
-
-static const struct file_operations riowd_fops = {
-	.owner =	THIS_MODULE,
-	.ioctl =	riowd_ioctl,
-	.open =		riowd_open,
-	.write =	riowd_write,
-	.release =	riowd_release,
-};
-
-static struct miscdevice riowd_miscdev = { RIOWD_MINOR, RIOWD_NAME, &riowd_fops };
-
-static int __init riowd_bbc_init(void)
-{
-	struct 	linux_ebus *ebus = NULL;
-	struct 	linux_ebus_device *edev = NULL;
-	u8 val;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->ofdev.node->name, "bbc"))
-				goto found_bbc;
-		}
-	}
-
-found_bbc:
-	if (!edev)
-		return -ENODEV;
-	bbc_regs = ioremap(edev->resource[0].start, BBC_REGS_SIZE);
-	if (!bbc_regs)
-		return -ENODEV;
-
-	/* Turn it off. */
-	val = readb(bbc_regs + BBC_WDACTION);
-	val &= ~BBC_WDACTION_RST;
-	writeb(val, bbc_regs + BBC_WDACTION);
-
-	return 0;
-}
-
-static int __init riowd_init(void)
-{
-	struct 	linux_ebus *ebus = NULL;
-	struct 	linux_ebus_device *edev = NULL;
-
-	for_each_ebus(ebus) {
-		for_each_ebusdev(edev, ebus) {
-			if (!strcmp(edev->ofdev.node->name, RIOWD_NAME))
-				goto ebus_done;
-		}
-	}
-
-ebus_done:
-	if (!edev)
-		goto fail;
-
-	riowd_regs = ioremap(edev->resource[0].start, 2);
-	if (riowd_regs == NULL) {
-		printk(KERN_ERR "pmc: Cannot map registers.\n");
-		return -ENODEV;
-	}
-
-	if (riowd_bbc_init()) {
-		printk(KERN_ERR "pmc: Failure initializing BBC config.\n");
-		goto fail;
-	}
-
-	if (misc_register(&riowd_miscdev)) {
-		printk(KERN_ERR "pmc: Cannot register watchdog misc device.\n");
-		goto fail;
-	}
-
-	printk(KERN_INFO "pmc: Hardware watchdog [%i minutes], "
-	       "regs at %p\n", riowd_timeout, riowd_regs);
-
-	return 0;
-
-fail:
-	if (riowd_regs) {
-		iounmap(riowd_regs);
-		riowd_regs = NULL;
-	}
-	if (bbc_regs) {
-		iounmap(bbc_regs);
-		bbc_regs = NULL;
-	}
-	return -ENODEV;
-}
-
-static void __exit riowd_cleanup(void)
-{
-	misc_deregister(&riowd_miscdev);
-	iounmap(riowd_regs);
-	riowd_regs = NULL;
-	iounmap(bbc_regs);
-	bbc_regs = NULL;
-}
-
-module_init(riowd_init);
-module_exit(riowd_cleanup);
diff --git a/drivers/sbus/char/rtc.c b/drivers/sbus/char/rtc.c
deleted file mode 100644
index b0429917154..00000000000
--- a/drivers/sbus/char/rtc.c
+++ /dev/null
@@ -1,275 +0,0 @@
-/* $Id: rtc.c,v 1.28 2001/10/08 22:19:51 davem Exp $
- *
- * Linux/SPARC Real Time Clock Driver
- * Copyright (C) 1996 Thomas K. Dyas (tdyas@eden.rutgers.edu)
- *
- * This is a little driver that lets a user-level program access
- * the SPARC Mostek real time clock chip. It is no use unless you
- * use the modified clock utility.
- *
- * Get the modified clock utility from:
- *   ftp://vger.kernel.org/pub/linux/Sparc/userland/clock.c
- */
-
-#include <linux/module.h>
-#include <linux/smp_lock.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/miscdevice.h>
-#include <linux/slab.h>
-#include <linux/fcntl.h>
-#include <linux/poll.h>
-#include <linux/init.h>
-#include <asm/io.h>
-#include <asm/mostek.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-#include <asm/rtc.h>
-
-static int rtc_busy = 0;
-
-/* This is the structure layout used by drivers/char/rtc.c, we
- * support that driver's ioctls so that things are less messy in
- * userspace.
- */
-struct rtc_time_generic {
-	int tm_sec;
-	int tm_min;
-	int tm_hour;
-	int tm_mday;
-	int tm_mon;
-	int tm_year;
-	int tm_wday;
-	int tm_yday;
-	int tm_isdst;
-};
-#define RTC_AIE_ON	_IO('p', 0x01)	/* Alarm int. enable on		*/
-#define RTC_AIE_OFF	_IO('p', 0x02)	/* ... off			*/
-#define RTC_UIE_ON	_IO('p', 0x03)	/* Update int. enable on	*/
-#define RTC_UIE_OFF	_IO('p', 0x04)	/* ... off			*/
-#define RTC_PIE_ON	_IO('p', 0x05)	/* Periodic int. enable on	*/
-#define RTC_PIE_OFF	_IO('p', 0x06)	/* ... off			*/
-#define RTC_WIE_ON	_IO('p', 0x0f)  /* Watchdog int. enable on	*/
-#define RTC_WIE_OFF	_IO('p', 0x10)  /* ... off			*/
-#define RTC_RD_TIME	_IOR('p', 0x09, struct rtc_time_generic) /* Read RTC time   */
-#define RTC_SET_TIME	_IOW('p', 0x0a, struct rtc_time_generic) /* Set RTC time    */
-#define RTC_ALM_SET	_IOW('p', 0x07, struct rtc_time) /* Set alarm time  */
-#define RTC_ALM_READ	_IOR('p', 0x08, struct rtc_time) /* Read alarm time */
-#define RTC_IRQP_READ	_IOR('p', 0x0b, unsigned long)	 /* Read IRQ rate   */
-#define RTC_IRQP_SET	_IOW('p', 0x0c, unsigned long)	 /* Set IRQ rate    */
-#define RTC_EPOCH_READ	_IOR('p', 0x0d, unsigned long)	 /* Read epoch      */
-#define RTC_EPOCH_SET	_IOW('p', 0x0e, unsigned long)	 /* Set epoch       */
-#define RTC_WKALM_SET	_IOW('p', 0x0f, struct rtc_wkalrm)/* Set wakeup alarm*/
-#define RTC_WKALM_RD	_IOR('p', 0x10, struct rtc_wkalrm)/* Get wakeup alarm*/
-#define RTC_PLL_GET	_IOR('p', 0x11, struct rtc_pll_info)  /* Get PLL correction */
-#define RTC_PLL_SET	_IOW('p', 0x12, struct rtc_pll_info)  /* Set PLL correction */
-
-/* Retrieve the current date and time from the real time clock. */
-static void get_rtc_time(struct rtc_time *t)
-{
-	void __iomem *regs = mstk48t02_regs;
-	u8 tmp;
-
-	spin_lock_irq(&mostek_lock);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_READ;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	t->sec = MSTK_REG_SEC(regs);
-	t->min = MSTK_REG_MIN(regs);
-	t->hour = MSTK_REG_HOUR(regs);
-	t->dow = MSTK_REG_DOW(regs);
-	t->dom = MSTK_REG_DOM(regs);
-	t->month = MSTK_REG_MONTH(regs);
-	t->year = MSTK_CVT_YEAR( MSTK_REG_YEAR(regs) );
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_READ;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-}
-
-/* Set the current date and time inthe real time clock. */
-void set_rtc_time(struct rtc_time *t)
-{
-	void __iomem *regs = mstk48t02_regs;
-	u8 tmp;
-
-	spin_lock_irq(&mostek_lock);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp |= MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	MSTK_SET_REG_SEC(regs,t->sec);
-	MSTK_SET_REG_MIN(regs,t->min);
-	MSTK_SET_REG_HOUR(regs,t->hour);
-	MSTK_SET_REG_DOW(regs,t->dow);
-	MSTK_SET_REG_DOM(regs,t->dom);
-	MSTK_SET_REG_MONTH(regs,t->month);
-	MSTK_SET_REG_YEAR(regs,t->year - MSTK_YEAR_ZERO);
-
-	tmp = mostek_read(regs + MOSTEK_CREG);
-	tmp &= ~MSTK_CREG_WRITE;
-	mostek_write(regs + MOSTEK_CREG, tmp);
-
-	spin_unlock_irq(&mostek_lock);
-}
-
-static int put_rtc_time_generic(void __user *argp, struct rtc_time *tm)
-{
-	struct rtc_time_generic __user *utm = argp;
-
-	if (__put_user(tm->sec, &utm->tm_sec) ||
-	    __put_user(tm->min, &utm->tm_min) ||
-	    __put_user(tm->hour, &utm->tm_hour) ||
-	    __put_user(tm->dom, &utm->tm_mday) ||
-	    __put_user(tm->month, &utm->tm_mon) ||
-	    __put_user(tm->year, &utm->tm_year) ||
-	    __put_user(tm->dow, &utm->tm_wday) ||
-	    __put_user(0, &utm->tm_yday) ||
-	    __put_user(0, &utm->tm_isdst))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int get_rtc_time_generic(struct rtc_time *tm, void __user *argp)
-{
-	struct rtc_time_generic __user *utm = argp;
-
-	if (__get_user(tm->sec, &utm->tm_sec) ||
-	    __get_user(tm->min, &utm->tm_min) ||
-	    __get_user(tm->hour, &utm->tm_hour) ||
-	    __get_user(tm->dom, &utm->tm_mday) ||
-	    __get_user(tm->month, &utm->tm_mon) ||
-	    __get_user(tm->year, &utm->tm_year) ||
-	    __get_user(tm->dow, &utm->tm_wday))
-		return -EFAULT;
-
-	return 0;
-}
-
-static int rtc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	unsigned long arg)
-{
-	struct rtc_time rtc_tm;
-	void __user *argp = (void __user *)arg;
-
-	switch (cmd) {
-	/* No interrupt support, return an error
-	 * compatible with drivers/char/rtc.c
-	 */
-	case RTC_AIE_OFF:
-	case RTC_AIE_ON:
-	case RTC_PIE_OFF:
-	case RTC_PIE_ON:
-	case RTC_UIE_OFF:
-	case RTC_UIE_ON:
-	case RTC_IRQP_READ:
-	case RTC_IRQP_SET:
-	case RTC_EPOCH_SET:
-	case RTC_EPOCH_READ:
-		return -EINVAL;
-
-	case RTCGET:
-	case RTC_RD_TIME:
-		memset(&rtc_tm, 0, sizeof(struct rtc_time));
-		get_rtc_time(&rtc_tm);
-
-		if (cmd == RTCGET) {
-			if (copy_to_user(argp, &rtc_tm,
-					 sizeof(struct rtc_time)))
-				return -EFAULT;
-		} else if (put_rtc_time_generic(argp, &rtc_tm))
-			return -EFAULT;
-
-		return 0;
-
-
-	case RTCSET:
-	case RTC_SET_TIME:
-		if (!capable(CAP_SYS_TIME))
-			return -EPERM;
-
-		if (cmd == RTCSET) {
-			if (copy_from_user(&rtc_tm, argp,
-					   sizeof(struct rtc_time)))
-				return -EFAULT;
-		} else if (get_rtc_time_generic(&rtc_tm, argp))
-			return -EFAULT;
-
-		set_rtc_time(&rtc_tm);
-
-		return 0;
-
-	default:
-		return -EINVAL;
-	}
-}
-
-static int rtc_open(struct inode *inode, struct file *file)
-{
-	int ret;
-
-	lock_kernel();
-	spin_lock_irq(&mostek_lock);
-	if (rtc_busy) {
-		ret = -EBUSY;
-	} else {
-		rtc_busy = 1;
-		ret = 0;
-	}
-	spin_unlock_irq(&mostek_lock);
-	unlock_kernel();
-
-	return ret;
-}
-
-static int rtc_release(struct inode *inode, struct file *file)
-{
-	rtc_busy = 0;
-
-	return 0;
-}
-
-static const struct file_operations rtc_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.ioctl =	rtc_ioctl,
-	.open =		rtc_open,
-	.release =	rtc_release,
-};
-
-static struct miscdevice rtc_dev = { RTC_MINOR, "rtc", &rtc_fops };
-
-static int __init rtc_sun_init(void)
-{
-	int error;
-
-	/* It is possible we are being driven by some other RTC chip
-	 * and thus another RTC driver is handling things.
-	 */
-	if (!mstk48t02_regs)
-		return -ENODEV;
-
-	error = misc_register(&rtc_dev);
-	if (error) {
-		printk(KERN_ERR "rtc: unable to get misc minor for Mostek\n");
-		return error;
-	}
-	printk("rtc_sun_init: Registered Mostek RTC driver.\n");
-
-	return 0;
-}
-
-static void __exit rtc_sun_cleanup(void)
-{
-	misc_deregister(&rtc_dev);
-}
-
-module_init(rtc_sun_init);
-module_exit(rtc_sun_cleanup);
-MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/uctrl.c b/drivers/sbus/char/uctrl.c
index 777637594ac..27993c37775 100644
--- a/drivers/sbus/char/uctrl.c
+++ b/drivers/sbus/char/uctrl.c
@@ -1,7 +1,7 @@
-/* $Id: uctrl.c,v 1.12 2001/10/08 22:19:51 davem Exp $
- * uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
+/* uctrl.c: TS102 Microcontroller interface on Tadpole Sparcbook 3
  *
  * Copyright 1999 Derrick J Brashear (shadow@dementia.org)
+ * Copyright 2008 David S. Miller (davem@davemloft.net)
  */
 
 #include <linux/module.h>
@@ -14,6 +14,8 @@
 #include <linux/init.h>
 #include <linux/miscdevice.h>
 #include <linux/mm.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/openprom.h>
 #include <asm/oplib.h>
@@ -21,7 +23,6 @@
 #include <asm/irq.h>
 #include <asm/io.h>
 #include <asm/pgtable.h>
-#include <asm/sbus.h>
 
 #define UCTRL_MINOR	174
 
@@ -33,26 +34,26 @@
 #endif
 
 struct uctrl_regs {
-	volatile u32 uctrl_intr;
-	volatile u32 uctrl_data;
-	volatile u32 uctrl_stat;
-	volatile u32 uctrl_xxx[5];
+	u32 uctrl_intr;
+	u32 uctrl_data;
+	u32 uctrl_stat;
+	u32 uctrl_xxx[5];
 };
 
 struct ts102_regs {
-	volatile u32 card_a_intr;
-	volatile u32 card_a_stat;
-	volatile u32 card_a_ctrl;
-	volatile u32 card_a_xxx;
-	volatile u32 card_b_intr;
-	volatile u32 card_b_stat;
-	volatile u32 card_b_ctrl;
-	volatile u32 card_b_xxx;
-	volatile u32 uctrl_intr;
-	volatile u32 uctrl_data;
-	volatile u32 uctrl_stat;
-	volatile u32 uctrl_xxx;
-	volatile u32 ts102_xxx[4];
+	u32 card_a_intr;
+	u32 card_a_stat;
+	u32 card_a_ctrl;
+	u32 card_a_xxx;
+	u32 card_b_intr;
+	u32 card_b_stat;
+	u32 card_b_ctrl;
+	u32 card_b_xxx;
+	u32 uctrl_intr;
+	u32 uctrl_data;
+	u32 uctrl_stat;
+	u32 uctrl_xxx;
+	u32 ts102_xxx[4];
 };
 
 /* Bits for uctrl_intr register */
@@ -186,17 +187,15 @@ enum uctrl_opcode {
   POWER_RESTART=0x83,
 };
 
-struct uctrl_driver {
-	struct uctrl_regs *regs;
+static struct uctrl_driver {
+	struct uctrl_regs __iomem *regs;
 	int irq;
 	int pending;
 	struct uctrl_status status;
-};
-
-static struct uctrl_driver drv;
+} *global_driver;
 
-static void uctrl_get_event_status(void);
-static void uctrl_get_external_status(void);
+static void uctrl_get_event_status(struct uctrl_driver *);
+static void uctrl_get_external_status(struct uctrl_driver *);
 
 static int
 uctrl_ioctl(struct inode *inode, struct file *file,
@@ -213,16 +212,14 @@ static int
 uctrl_open(struct inode *inode, struct file *file)
 {
 	lock_kernel();
-	uctrl_get_event_status();
-	uctrl_get_external_status();
+	uctrl_get_event_status(global_driver);
+	uctrl_get_external_status(global_driver);
 	unlock_kernel();
 	return 0;
 }
 
 static irqreturn_t uctrl_interrupt(int irq, void *dev_id)
 {
-	struct uctrl_driver *driver = (struct uctrl_driver *)dev_id;
-	printk("in uctrl_interrupt\n");
 	return IRQ_HANDLED;
 }
 
@@ -244,11 +241,11 @@ static struct miscdevice uctrl_dev = {
 { \
   unsigned int i; \
   for (i = 0; i < 10000; i++) { \
-    if (UCTRL_STAT_TXNF_STA & driver->regs->uctrl_stat) \
+      if (UCTRL_STAT_TXNF_STA & sbus_readl(&driver->regs->uctrl_stat)) \
       break; \
   } \
   dprintk(("write data 0x%02x\n", value)); \
-  driver->regs->uctrl_data = value; \
+  sbus_writel(value, &driver->regs->uctrl_data); \
 }
 
 /* Wait for something to read, read it, then clear the bit */
@@ -257,24 +254,23 @@ static struct miscdevice uctrl_dev = {
   unsigned int i; \
   value = 0; \
   for (i = 0; i < 10000; i++) { \
-    if ((UCTRL_STAT_RXNE_STA & driver->regs->uctrl_stat) == 0) \
+      if ((UCTRL_STAT_RXNE_STA & sbus_readl(&driver->regs->uctrl_stat)) == 0) \
       break; \
     udelay(1); \
   } \
-  value = driver->regs->uctrl_data; \
+  value = sbus_readl(&driver->regs->uctrl_data); \
   dprintk(("read data 0x%02x\n", value)); \
-  driver->regs->uctrl_stat = UCTRL_STAT_RXNE_STA; \
+  sbus_writel(UCTRL_STAT_RXNE_STA, &driver->regs->uctrl_stat); \
 }
 
-static void uctrl_do_txn(struct uctrl_txn *txn)
+static void uctrl_do_txn(struct uctrl_driver *driver, struct uctrl_txn *txn)
 {
-	struct uctrl_driver *driver = &drv;
 	int stat, incnt, outcnt, bytecnt, intr;
 	u32 byte;
 
-	stat = driver->regs->uctrl_stat;
-	intr = driver->regs->uctrl_intr;
-	driver->regs->uctrl_stat = stat;
+	stat = sbus_readl(&driver->regs->uctrl_stat);
+	intr = sbus_readl(&driver->regs->uctrl_intr);
+	sbus_writel(stat, &driver->regs->uctrl_stat);
 
 	dprintk(("interrupt stat 0x%x int 0x%x\n", stat, intr));
 
@@ -305,9 +301,8 @@ static void uctrl_do_txn(struct uctrl_txn *txn)
 	}
 }
 
-static void uctrl_get_event_status(void)
+static void uctrl_get_event_status(struct uctrl_driver *driver)
 {
-	struct uctrl_driver *driver = &drv;
 	struct uctrl_txn txn;
 	u8 outbits[2];
 
@@ -317,7 +312,7 @@ static void uctrl_get_event_status(void)
 	txn.inbuf = NULL;
 	txn.outbuf = outbits;
 
-	uctrl_do_txn(&txn);
+	uctrl_do_txn(driver, &txn);
 
 	dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
 	driver->status.event_status = 
@@ -325,9 +320,8 @@ static void uctrl_get_event_status(void)
 	dprintk(("ev is %x\n", driver->status.event_status));
 }
 
-static void uctrl_get_external_status(void)
+static void uctrl_get_external_status(struct uctrl_driver *driver)
 {
-	struct uctrl_driver *driver = &drv;
 	struct uctrl_txn txn;
 	u8 outbits[2];
 	int i, v;
@@ -338,7 +332,7 @@ static void uctrl_get_external_status(void)
 	txn.inbuf = NULL;
 	txn.outbuf = outbits;
 
-	uctrl_do_txn(&txn);
+	uctrl_do_txn(driver, &txn);
 
 	dprintk(("bytes %x %x\n", (outbits[0] & 0xff), (outbits[1] & 0xff)));
 	driver->status.external_status = 
@@ -354,71 +348,101 @@ static void uctrl_get_external_status(void)
 	
 }
 
-static int __init ts102_uctrl_init(void)
+static int __devinit uctrl_probe(struct of_device *op,
+				 const struct of_device_id *match)
 {
-	struct uctrl_driver *driver = &drv;
-	int len;
-	struct linux_prom_irqs tmp_irq[2];
-        unsigned int vaddr[2] = { 0, 0 };
-	int tmpnode, uctrlnode = prom_getchild(prom_root_node);
-	int err;
+	struct uctrl_driver *p;
+	int err = -ENOMEM;
 
-	tmpnode = prom_searchsiblings(uctrlnode, "obio");
+	p = kzalloc(sizeof(*p), GFP_KERNEL);
+	if (!p) {
+		printk(KERN_ERR "uctrl: Unable to allocate device struct.\n");
+		goto out;
+	}
 
-	if (tmpnode)
-	  uctrlnode = prom_getchild(tmpnode);
+	p->regs = of_ioremap(&op->resource[0], 0,
+			     resource_size(&op->resource[0]),
+			     "uctrl");
+	if (!p->regs) {
+		printk(KERN_ERR "uctrl: Unable to map registers.\n");
+		goto out_free;
+	}
 
-	uctrlnode = prom_searchsiblings(uctrlnode, "uctrl");
+	p->irq = op->irqs[0];
+	err = request_irq(p->irq, uctrl_interrupt, 0, "uctrl", p);
+	if (err) {
+		printk(KERN_ERR "uctrl: Unable to register irq.\n");
+		goto out_iounmap;
+	}
 
-	if (!uctrlnode)
-		return -ENODEV;
+	err = misc_register(&uctrl_dev);
+	if (err) {
+		printk(KERN_ERR "uctrl: Unable to register misc device.\n");
+		goto out_free_irq;
+	}
 
-	/* the prom mapped it for us */
-	len = prom_getproperty(uctrlnode, "address", (void *) vaddr,
-			       sizeof(vaddr));
-	driver->regs = (struct uctrl_regs *)vaddr[0];
+	sbus_writel(UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK, &p->regs->uctrl_intr);
+	printk(KERN_INFO "%s: uctrl regs[0x%p] (irq %d)\n",
+	       op->node->full_name, p->regs, p->irq);
+	uctrl_get_event_status(p);
+	uctrl_get_external_status(p);
 
-	len = prom_getproperty(uctrlnode, "intr", (char *) tmp_irq,
-			       sizeof(tmp_irq));
+	dev_set_drvdata(&op->dev, p);
+	global_driver = p;
 
-	/* Flush device */
-	READUCTLDATA(len);
+out:
+	return err;
 
-	if(!driver->irq) 
-		driver->irq = tmp_irq[0].pri;
+out_free_irq:
+	free_irq(p->irq, p);
 
-	err = request_irq(driver->irq, uctrl_interrupt, 0, "uctrl", driver);
-	if (err) {
-		printk("%s: unable to register irq %d\n",
-		       __func__, driver->irq);
-		return err;
-	}
+out_iounmap:
+	of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
 
-	if (misc_register(&uctrl_dev)) {
-		printk("%s: unable to get misc minor %d\n",
-		       __func__, uctrl_dev.minor);
-		free_irq(driver->irq, driver);
-		return -ENODEV;
-	}
+out_free:
+	kfree(p);
+	goto out;
+}
 
-	driver->regs->uctrl_intr = UCTRL_INTR_RXNE_REQ|UCTRL_INTR_RXNE_MSK;
-	printk("uctrl: 0x%p (irq %d)\n", driver->regs, driver->irq);
-	uctrl_get_event_status();
-	uctrl_get_external_status();
-        return 0;
+static int __devexit uctrl_remove(struct of_device *op)
+{
+	struct uctrl_driver *p = dev_get_drvdata(&op->dev);
+
+	if (p) {
+		misc_deregister(&uctrl_dev);
+		free_irq(p->irq, p);
+		of_iounmap(&op->resource[0], p->regs, resource_size(&op->resource[0]));
+		kfree(p);
+	}
+	return 0;
 }
 
-static void __exit ts102_uctrl_cleanup(void)
+static const struct of_device_id uctrl_match[] = {
+	{
+		.name = "uctrl",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, uctrl_match);
+
+static struct of_platform_driver uctrl_driver = {
+	.name		= "uctrl",
+	.match_table	= uctrl_match,
+	.probe		= uctrl_probe,
+	.remove		= __devexit_p(uctrl_remove),
+};
+
+
+static int __init uctrl_init(void)
 {
-	struct uctrl_driver *driver = &drv;
+	return of_register_driver(&uctrl_driver, &of_bus_type);
+}
 
-	misc_deregister(&uctrl_dev);
-	if (driver->irq)
-		free_irq(driver->irq, driver);
-	if (driver->regs)
-		driver->regs = NULL;
+static void __exit uctrl_exit(void)
+{
+	of_unregister_driver(&uctrl_driver);
 }
 
-module_init(ts102_uctrl_init);
-module_exit(ts102_uctrl_cleanup);
+module_init(uctrl_init);
+module_exit(uctrl_exit);
 MODULE_LICENSE("GPL");
diff --git a/drivers/sbus/char/vfc.h b/drivers/sbus/char/vfc.h
deleted file mode 100644
index a5240c52aa0..00000000000
--- a/drivers/sbus/char/vfc.h
+++ /dev/null
@@ -1,171 +0,0 @@
-#ifndef _LINUX_VFC_H_
-#define _LINUX_VFC_H_
-
-/*
- * The control register for the vfc is at offset 0x4000
- * The first field ram bank is located at offset 0x5000
- * The second field ram bank is at offset 0x7000
- * i2c_reg address the Phillips PCF8584(see notes in vfc_i2c.c) 
- *    data and transmit register.
- * i2c_s1 controls register s1 of the PCF8584
- * i2c_write seems to be similar to i2c_write but I am not 
- *    quite sure why sun uses it
- * 
- * I am also not sure whether or not you can read the fram bank as a
- * whole or whether you must read each word individually from offset
- * 0x5000 as soon as I figure it out I will update this file */
-
-struct vfc_regs {
-	char pad1[0x4000];
-	unsigned int control;  /* Offset 0x4000 */
-	char pad2[0xffb];      /* from offset 0x4004 to 0x5000 */
-	unsigned int fram_bank1; /* Offset 0x5000 */
-	char pad3[0xffb];        /* from offset 0x5004 to 0x6000 */
-	unsigned int i2c_reg; /* Offset 0x6000 */
-	unsigned int i2c_magic2; /* Offset 0x6004 */
-	unsigned int i2c_s1;  /* Offset 0x6008 */
-	unsigned int i2c_write; /* Offset 0x600c */
-	char pad4[0xff0];     /* from offset 0x6010 to 0x7000 */
-	unsigned int fram_bank2; /* Offset 0x7000 */
-	char pad5[0x1000];
-};
-
-#define VFC_SAA9051_NR (13)
-#define VFC_SAA9051_ADDR (0x8a)
-	/* The saa9051 returns the following for its status 
-	 * bit 0 - 0
-	 * bit 1 - SECAM color detected (1=found,0=not found)
-	 * bit 2 - COLOR detected (1=found,0=not found)
-	 * bit 3 - 0
-	 * bit 4 - Field frequency bit (1=60Hz (NTSC), 0=50Hz (PAL))
-	 * bit 5 - 1
-	 * bit 6 - horizontal frequency lock (1=transmitter found,
-	 *                                    0=no transmitter)
-	 * bit 7 - Power on reset bit (1=reset,0=at least one successful 
-	 *                                       read of the status byte)
-	 */
-
-#define VFC_SAA9051_PONRES (0x80)
-#define VFC_SAA9051_HLOCK (0x40)
-#define VFC_SAA9051_FD (0x10)
-#define VFC_SAA9051_CD (0x04)
-#define VFC_SAA9051_CS (0x02)
-
-
-/* The various saa9051 sub addresses */
-
-#define VFC_SAA9051_IDEL (0) 
-#define VFC_SAA9051_HSY_START (1)
-#define VFC_SAA9051_HSY_STOP (2)
-#define VFC_SAA9051_HC_START (3)
-#define VFC_SAA9051_HC_STOP (4)
-#define VFC_SAA9051_HS_START (5)
-#define VFC_SAA9051_HORIZ_PEAK (6)
-#define VFC_SAA9051_HUE (7)
-#define VFC_SAA9051_C1 (8)
-#define VFC_SAA9051_C2 (9)
-#define VFC_SAA9051_C3 (0xa)
-#define VFC_SAA9051_SECAM_DELAY (0xb)
-
-
-/* Bit settings for saa9051 sub address 0x06 */
-
-#define VFC_SAA9051_AP1 (0x01)
-#define VFC_SAA9051_AP2 (0x02)
-#define VFC_SAA9051_COR1 (0x04)
-#define VFC_SAA9051_COR2 (0x08)
-#define VFC_SAA9051_BP1 (0x10)
-#define VFC_SAA9051_BP2 (0x20)
-#define VFC_SAA9051_PF (0x40)
-#define VFC_SAA9051_BY (0x80)
-
-
-/* Bit settings for saa9051 sub address 0x08 */
-
-#define VFC_SAA9051_CCFR0 (0x01)
-#define VFC_SAA9051_CCFR1 (0x02)
-#define VFC_SAA9051_YPN (0x04)
-#define VFC_SAA9051_ALT (0x08)
-#define VFC_SAA9051_CO (0x10)
-#define VFC_SAA9051_VTR (0x20)
-#define VFC_SAA9051_FS (0x40)
-#define VFC_SAA9051_HPLL (0x80)
-
-
-/* Bit settings for saa9051 sub address 9 */
-
-#define VFC_SAA9051_SS0 (0x01)
-#define VFC_SAA9051_SS1 (0x02)
-#define VFC_SAA9051_AFCC (0x04)
-#define VFC_SAA9051_CI (0x08)
-#define VFC_SAA9051_SA9D4 (0x10) /* Don't care bit */
-#define VFC_SAA9051_OEC (0x20)
-#define VFC_SAA9051_OEY (0x40)
-#define VFC_SAA9051_VNL (0x80)
-
-
-/* Bit settings for saa9051 sub address 0x0A */
-
-#define VFC_SAA9051_YDL0 (0x01)
-#define VFC_SAA9051_YDL1 (0x02)
-#define VFC_SAA9051_YDL2 (0x04)
-#define VFC_SAA9051_SS2 (0x08)
-#define VFC_SAA9051_SS3 (0x10)
-#define VFC_SAA9051_YC (0x20)
-#define VFC_SAA9051_CT (0x40)
-#define VFC_SAA9051_SYC (0x80)
-
-
-#define VFC_SAA9051_SA(a,b) ((a)->saa9051_state_array[(b)+1])
-#define vfc_update_saa9051(a) (vfc_i2c_sendbuf((a),VFC_SAA9051_ADDR,\
-					    (a)->saa9051_state_array,\
-					    VFC_SAA9051_NR))
-
-
-struct vfc_dev {
-	volatile struct vfc_regs __iomem *regs;
-	struct vfc_regs *phys_regs;
-	unsigned int control_reg;
-	struct mutex device_lock_mtx;
-	int instance;
-	int busy;
-	unsigned long which_io;
-	unsigned char saa9051_state_array[VFC_SAA9051_NR];
-};
-
-void captstat_reset(struct vfc_dev *);
-void memptr_reset(struct vfc_dev *);
-
-int vfc_pcf8584_init(struct vfc_dev *);
-void vfc_i2c_delay_no_busy(struct vfc_dev *, unsigned long);
-void vfc_i2c_delay(struct vfc_dev *);
-int vfc_i2c_sendbuf(struct vfc_dev *, unsigned char, char *, int) ;
-int vfc_i2c_recvbuf(struct vfc_dev *, unsigned char, char *, int) ;
-int vfc_i2c_reset_bus(struct vfc_dev *);
-int vfc_init_i2c_bus(struct vfc_dev *);
-
-#define VFC_CONTROL_DIAGMODE  0x10000000
-#define VFC_CONTROL_MEMPTR    0x20000000
-#define VFC_CONTROL_CAPTURE   0x02000000
-#define VFC_CONTROL_CAPTRESET 0x04000000
-
-#define VFC_STATUS_CAPTURE    0x08000000
-
-#ifdef VFC_IOCTL_DEBUG
-#define VFC_IOCTL_DEBUG_PRINTK(a) printk a
-#else
-#define VFC_IOCTL_DEBUG_PRINTK(a)
-#endif
-
-#ifdef VFC_I2C_DEBUG
-#define VFC_I2C_DEBUG_PRINTK(a) printk a
-#else
-#define VFC_I2C_DEBUG_PRINTK(a)
-#endif
-
-#endif /* _LINUX_VFC_H_ */
-
-
-
-
-
diff --git a/drivers/sbus/char/vfc_dev.c b/drivers/sbus/char/vfc_dev.c
deleted file mode 100644
index 25181bb7d62..00000000000
--- a/drivers/sbus/char/vfc_dev.c
+++ /dev/null
@@ -1,736 +0,0 @@
-/*
- * drivers/sbus/char/vfc_dev.c
- *
- * Driver for the Videopix Frame Grabber.
- * 
- * In order to use the VFC you need to program the video controller
- * chip. This chip is the Phillips SAA9051.  You need to call their
- * documentation ordering line to get the docs.
- *
- * There is very little documentation on the VFC itself.  There is
- * some useful info that can be found in the manuals that come with
- * the card.  I will hopefully write some better docs at a later date.
- *
- * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu)
- * */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/fs.h>
-#include <linux/delay.h>
-#include <linux/spinlock.h>
-#include <linux/mutex.h>
-#include <linux/mm.h>
-#include <linux/smp_lock.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/sbus.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/uaccess.h>
-
-#define VFC_MAJOR (60)
-
-#if 0
-#define VFC_IOCTL_DEBUG
-#endif
-
-#include "vfc.h"
-#include <asm/vfc_ioctls.h>
-
-static const struct file_operations vfc_fops;
-static struct vfc_dev **vfc_dev_lst;
-static char vfcstr[]="vfc";
-static unsigned char saa9051_init_array[VFC_SAA9051_NR] = {
-	0x00, 0x64, 0x72, 0x52,
-	0x36, 0x18, 0xff, 0x20,
-	0xfc, 0x77, 0xe3, 0x50,
-	0x3e
-};
-
-static void vfc_lock_device(struct vfc_dev *dev)
-{
-	mutex_lock(&dev->device_lock_mtx);
-}
-
-static void vfc_unlock_device(struct vfc_dev *dev)
-{
-	mutex_unlock(&dev->device_lock_mtx);
-}
-
-
-static void vfc_captstat_reset(struct vfc_dev *dev)
-{
-	dev->control_reg |= VFC_CONTROL_CAPTRESET;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg &= ~VFC_CONTROL_CAPTRESET;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg |= VFC_CONTROL_CAPTRESET;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-}
-
-static void vfc_memptr_reset(struct vfc_dev *dev)
-{
-	dev->control_reg |= VFC_CONTROL_MEMPTR;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg &= ~VFC_CONTROL_MEMPTR;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg |= VFC_CONTROL_MEMPTR; 
-	sbus_writel(dev->control_reg, &dev->regs->control);
-}
-
-static int vfc_csr_init(struct vfc_dev *dev)
-{
-	dev->control_reg = 0x80000000;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	udelay(200); 
-	dev->control_reg &= ~0x80000000;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	udelay(100); 
-	sbus_writel(0x0f000000, &dev->regs->i2c_magic2);
-
-	vfc_memptr_reset(dev);
-
-	dev->control_reg &= ~VFC_CONTROL_DIAGMODE;
-	dev->control_reg &= ~VFC_CONTROL_CAPTURE;
-	dev->control_reg |= 0x40000000;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-
-	vfc_captstat_reset(dev);
-
-	return 0;
-}
-
-static int vfc_saa9051_init(struct vfc_dev *dev)
-{
-	int i;
-
-	for (i = 0; i < VFC_SAA9051_NR; i++)
-		dev->saa9051_state_array[i] = saa9051_init_array[i];
-
-	vfc_i2c_sendbuf(dev,VFC_SAA9051_ADDR,
-			dev->saa9051_state_array, VFC_SAA9051_NR);
-	return 0;
-}
-
-static int init_vfc_hw(struct vfc_dev *dev)
-{
-	vfc_lock_device(dev);
-	vfc_csr_init(dev);
-
-	vfc_pcf8584_init(dev);
-	vfc_init_i2c_bus(dev); /* hopefully this doesn't undo the magic
-				  sun code above*/
-	vfc_saa9051_init(dev);
-	vfc_unlock_device(dev);
-	return 0; 
-}
-
-static int init_vfc_devstruct(struct vfc_dev *dev, int instance)
-{
-	dev->instance=instance;
-	mutex_init(&dev->device_lock_mtx);
-	dev->control_reg=0;
-	dev->busy=0;
-	return 0;
-}
-
-static int init_vfc_device(struct sbus_dev *sdev,struct vfc_dev *dev,
-			   int instance)
-{
-	if(dev == NULL) {
-		printk(KERN_ERR "VFC: Bogus pointer passed\n");
-		return -ENOMEM;
-	}
-	printk("Initializing vfc%d\n",instance);
-	dev->regs = NULL;
-	dev->regs = (volatile struct vfc_regs __iomem *)
-		sbus_ioremap(&sdev->resource[0], 0,
-			     sizeof(struct vfc_regs), vfcstr);
-	dev->which_io = sdev->reg_addrs[0].which_io;
-	dev->phys_regs = (struct vfc_regs *) sdev->reg_addrs[0].phys_addr;
-	if (dev->regs == NULL)
-		return -EIO;
-
-	printk("vfc%d: registers mapped at phys_addr: 0x%lx\n    virt_addr: 0x%lx\n",
-	       instance,(unsigned long)sdev->reg_addrs[0].phys_addr,(unsigned long)dev->regs);
-
-	if (init_vfc_devstruct(dev, instance))
-		return -EINVAL;
-	if (init_vfc_hw(dev))
-		return -EIO;
-	return 0;
-}
-
-
-static struct vfc_dev *vfc_get_dev_ptr(int instance)
-{
-	return vfc_dev_lst[instance];
-}
-
-static DEFINE_SPINLOCK(vfc_dev_lock);
-
-static int vfc_open(struct inode *inode, struct file *file) 
-{
-	struct vfc_dev *dev;
-
-	lock_kernel();
-	spin_lock(&vfc_dev_lock);
-	dev = vfc_get_dev_ptr(iminor(inode));
-	if (dev == NULL) {
-		spin_unlock(&vfc_dev_lock);
-		unlock_kernel();
-		return -ENODEV;
-	}
-	if (dev->busy) {
-		spin_unlock(&vfc_dev_lock);
-		unlock_kernel();
-		return -EBUSY;
-	}
-
-	dev->busy = 1;
-	spin_unlock(&vfc_dev_lock);
-
-	vfc_lock_device(dev);
-	
-	vfc_csr_init(dev);
-	vfc_pcf8584_init(dev);
-	vfc_init_i2c_bus(dev);
-	vfc_saa9051_init(dev);
-	vfc_memptr_reset(dev);
-	vfc_captstat_reset(dev);
-	
-	vfc_unlock_device(dev);
-	unlock_kernel();
-	return 0;
-}
-
-static int vfc_release(struct inode *inode,struct file *file) 
-{
-	struct vfc_dev *dev;
-
-	spin_lock(&vfc_dev_lock);
-	dev = vfc_get_dev_ptr(iminor(inode));
-	if (!dev || !dev->busy) {
-		spin_unlock(&vfc_dev_lock);
-		return -EINVAL;
-	}
-	dev->busy = 0;
-	spin_unlock(&vfc_dev_lock);
-	return 0;
-}
-
-static int vfc_debug(struct vfc_dev *dev, int cmd, void __user *argp)
-{
-	struct vfc_debug_inout inout;
-	unsigned char *buffer;
-
-	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
-
-	switch(cmd) {
-	case VFC_I2C_SEND:
-		if(copy_from_user(&inout, argp, sizeof(inout)))
-			return -EFAULT;
-
-		buffer = kmalloc(inout.len, GFP_KERNEL);
-		if (buffer == NULL)
-			return -ENOMEM;
-
-		if(copy_from_user(buffer, inout.buffer, inout.len)) {
-			kfree(buffer);
-			return -EFAULT;
-		}
-		
-
-		vfc_lock_device(dev);
-		inout.ret=
-			vfc_i2c_sendbuf(dev,inout.addr & 0xff,
-					buffer,inout.len);
-
-		if (copy_to_user(argp,&inout,sizeof(inout))) {
-			vfc_unlock_device(dev);
-			kfree(buffer);
-			return -EFAULT;
-		}
-		vfc_unlock_device(dev);
-
-		break;
-	case VFC_I2C_RECV:
-		if (copy_from_user(&inout, argp, sizeof(inout)))
-			return -EFAULT;
-
-		buffer = kzalloc(inout.len, GFP_KERNEL);
-		if (buffer == NULL)
-			return -ENOMEM;
-
-		vfc_lock_device(dev);
-		inout.ret=
-			vfc_i2c_recvbuf(dev,inout.addr & 0xff
-					,buffer,inout.len);
-		vfc_unlock_device(dev);
-		
-		if (copy_to_user(inout.buffer, buffer, inout.len)) {
-			kfree(buffer);
-			return -EFAULT;
-		}
-		if (copy_to_user(argp,&inout,sizeof(inout))) {
-			kfree(buffer);
-			return -EFAULT;
-		}
-		kfree(buffer);
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	return 0;
-}
-
-static int vfc_capture_start(struct vfc_dev *dev)
-{
-	vfc_captstat_reset(dev);
-	dev->control_reg = sbus_readl(&dev->regs->control);
-	if((dev->control_reg & VFC_STATUS_CAPTURE)) {
-		printk(KERN_ERR "vfc%d: vfc capture status not reset\n",
-		       dev->instance);
-		return -EIO;
-	}
-
-	vfc_lock_device(dev);
-	dev->control_reg &= ~VFC_CONTROL_CAPTURE;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg |= VFC_CONTROL_CAPTURE;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	dev->control_reg &= ~VFC_CONTROL_CAPTURE;
-	sbus_writel(dev->control_reg, &dev->regs->control);
-	vfc_unlock_device(dev);
-
-	return 0;
-}
-
-static int vfc_capture_poll(struct vfc_dev *dev)
-{
-	int timeout = 1000;
-
-	while (!timeout--) {
-		if (sbus_readl(&dev->regs->control) & VFC_STATUS_CAPTURE)
-			break;
-		vfc_i2c_delay_no_busy(dev, 100);
-	}
-	if(!timeout) {
-		printk(KERN_WARNING "vfc%d: capture timed out\n",
-		       dev->instance);
-		return -ETIMEDOUT;
-	}
-	return 0;
-}
-
-
-
-static int vfc_set_control_ioctl(struct inode *inode, struct file *file, 
-			  struct vfc_dev *dev, unsigned long arg) 
-{
-	int setcmd, ret = 0;
-
-	if (copy_from_user(&setcmd,(void __user *)arg,sizeof(unsigned int)))
-		return -EFAULT;
-
-	VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSCTRL) arg=0x%x\n",
-				dev->instance,setcmd));
-
-	switch(setcmd) {
-	case MEMPRST:
-		vfc_lock_device(dev);
-		vfc_memptr_reset(dev);
-		vfc_unlock_device(dev);
-		ret=0;
-		break;
-	case CAPTRCMD:
-		vfc_capture_start(dev);
-		vfc_capture_poll(dev);
-		break;
-	case DIAGMODE:
-		if(capable(CAP_SYS_ADMIN)) {
-			vfc_lock_device(dev);
-			dev->control_reg |= VFC_CONTROL_DIAGMODE;
-			sbus_writel(dev->control_reg, &dev->regs->control);
-			vfc_unlock_device(dev);
-			ret = 0;
-		} else {
-			ret = -EPERM; 
-		}
-		break;
-	case NORMMODE:
-		vfc_lock_device(dev);
-		dev->control_reg &= ~VFC_CONTROL_DIAGMODE;
-		sbus_writel(dev->control_reg, &dev->regs->control);
-		vfc_unlock_device(dev);
-		ret = 0;
-		break;
-	case CAPTRSTR:
-		vfc_capture_start(dev);
-		ret = 0;
-		break;
-	case CAPTRWAIT:
-		vfc_capture_poll(dev);
-		ret = 0;
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	};
-
-	return ret;
-}
-
-
-static int vfc_port_change_ioctl(struct inode *inode, struct file *file,
-				 struct vfc_dev *dev, unsigned long arg)
-{
-	int ret = 0;
-	int cmd;
-
-	if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) {
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
-					"vfc_port_change_ioctl\n",
-					dev->instance));
-		return -EFAULT;
-	}
-	
-	VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCPORTCHG) arg=0x%x\n",
-				dev->instance, cmd));
-
-	switch(cmd) {
-	case 1:
-	case 2:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x72; 
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x52;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0x36;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0x18;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) = VFC_SAA9051_BP2;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_CT | VFC_SAA9051_SS3;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0x3e;
-		break;
-	case 3:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_START) = 0x3a;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HSY_STOP) = 0x17;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HC_START) = 0xfa;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HC_STOP) = 0xde;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) =
-			VFC_SAA9051_BY | VFC_SAA9051_PF | VFC_SAA9051_BP2;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C3) = VFC_SAA9051_YC;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_SECAM_DELAY) = 0;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &=
-			~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
-		break;
-	default:
-		ret = -EINVAL;
-		return ret;
-		break;
-	}
-
-	switch(cmd) {
-	case 1:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |=
-			(VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
-		break;
-	case 2:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C2) &=
-			~(VFC_SAA9051_SS0 | VFC_SAA9051_SS1);
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C2) |= VFC_SAA9051_SS0; 
-		break;
-	case 3:
-		break;
-	default:
-		ret = -EINVAL;
-		return ret;
-		break;
-	}
-	VFC_SAA9051_SA(dev,VFC_SAA9051_C3) &= ~(VFC_SAA9051_SS2);
-	ret=vfc_update_saa9051(dev);
-	udelay(500);
-	VFC_SAA9051_SA(dev,VFC_SAA9051_C3) |= (VFC_SAA9051_SS2);
-	ret=vfc_update_saa9051(dev);
-	return ret;
-}
-
-static int vfc_set_video_ioctl(struct inode *inode, struct file *file,
-			       struct vfc_dev *dev, unsigned long arg)
-{
-	int ret = 0;
-	int cmd;
-
-	if(copy_from_user(&cmd, (void __user *)arg, sizeof(unsigned int))) {
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
-					"vfc_set_video_ioctl\n",
-					dev->instance));
-		return ret;
-	}
-	
-	VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCSVID) arg=0x%x\n",
-				dev->instance, cmd));
-	switch(cmd) {
-	case STD_NTSC:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~VFC_SAA9051_ALT;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_YPN | 
-			VFC_SAA9051_CCFR0 | VFC_SAA9051_CCFR1 | VFC_SAA9051_FS;
-		ret = vfc_update_saa9051(dev);
-		break;
-	case STD_PAL:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_YPN | 
-							VFC_SAA9051_CCFR1 | 
-							VFC_SAA9051_CCFR0 |
-							VFC_SAA9051_FS);
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_ALT;
-		ret = vfc_update_saa9051(dev);
-		break;
-
-	case COLOR_ON:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) |= VFC_SAA9051_CO;
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) &=
-			~(VFC_SAA9051_BY | VFC_SAA9051_PF);
-		ret = vfc_update_saa9051(dev);
-		break;
-	case MONO:
-		VFC_SAA9051_SA(dev,VFC_SAA9051_C1) &= ~(VFC_SAA9051_CO);
-		VFC_SAA9051_SA(dev,VFC_SAA9051_HORIZ_PEAK) |=
-			(VFC_SAA9051_BY | VFC_SAA9051_PF);
-		ret = vfc_update_saa9051(dev);
-		break;
-	default:
-		ret = -EINVAL;
-		break;
-	};
-
-	return ret;
-}
-
-static int vfc_get_video_ioctl(struct inode *inode, struct file *file,
-			       struct vfc_dev *dev, unsigned long arg)
-{
-	int ret = 0;
-	unsigned int status = NO_LOCK;
-	unsigned char buf[1];
-
-	if(vfc_i2c_recvbuf(dev, VFC_SAA9051_ADDR, buf, 1)) {
-		printk(KERN_ERR "vfc%d: Unable to get status\n",
-		       dev->instance);
-		return -EIO;
-	}
-
-	if(buf[0] & VFC_SAA9051_HLOCK) {
-		status = NO_LOCK;
-	} else if(buf[0] & VFC_SAA9051_FD) {
-		if(buf[0] & VFC_SAA9051_CD)
-			status = NTSC_COLOR;
-		else
-			status = NTSC_NOCOLOR;
-	} else {
-		if(buf[0] & VFC_SAA9051_CD)
-			status = PAL_COLOR;
-		else
-			status = PAL_NOCOLOR;
-	}
-	VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGVID) returning status 0x%x; "
-				"buf[0]=%x\n", dev->instance, status, buf[0]));
-
-	if (copy_to_user((void __user *)arg,&status,sizeof(unsigned int))) {
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer to "
-					"vfc_get_video_ioctl\n",
-					dev->instance));
-		return ret;
-	}
-	return ret;
-}
-
-static int vfc_ioctl(struct inode *inode, struct file *file, unsigned int cmd,
-	      unsigned long arg) 
-{
-	int ret = 0;
-	unsigned int tmp;
-	struct vfc_dev *dev;
-	void __user *argp = (void __user *)arg;
-
-	dev = vfc_get_dev_ptr(iminor(inode));
-	if(dev == NULL)
-		return -ENODEV;
-	
-	switch(cmd & 0x0000ffff) {
-	case VFCGCTRL:
-#if 0
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCGCTRL)\n", dev->instance));
-#endif
-		tmp = sbus_readl(&dev->regs->control);
-		if(copy_to_user(argp, &tmp, sizeof(unsigned int))) {
-			ret = -EFAULT;
-			break;
-		}
-		ret = 0;
-		break;
-	case VFCSCTRL:
-		ret = vfc_set_control_ioctl(inode, file, dev, arg);
-		break;
-	case VFCGVID:
-		ret = vfc_get_video_ioctl(inode, file, dev, arg);
-		break;
-	case VFCSVID:
-		ret = vfc_set_video_ioctl(inode, file, dev, arg);
-		break;
-	case VFCHUE:
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCHUE)\n", dev->instance));
-		if(copy_from_user(&tmp,argp,sizeof(unsigned int))) {
-			VFC_IOCTL_DEBUG_PRINTK(("vfc%d: User passed bogus pointer "
-						"to IOCTL(VFCHUE)", dev->instance));
-			ret = -EFAULT;
-		} else {
-			VFC_SAA9051_SA(dev,VFC_SAA9051_HUE) = tmp;
-			vfc_update_saa9051(dev);
-			ret = 0;
-		}
-		break;
-	case VFCPORTCHG:
-		ret = vfc_port_change_ioctl(inode, file, dev, arg);
-		break;
-	case VFCRDINFO:
-		ret = -EINVAL;
-		VFC_IOCTL_DEBUG_PRINTK(("vfc%d: IOCTL(VFCRDINFO)\n", dev->instance));
-		break;
-	default:
-		ret = vfc_debug(vfc_get_dev_ptr(iminor(inode)), cmd, argp);
-		break;
-	};
-
-	return ret;
-}
-
-static int vfc_mmap(struct file *file, struct vm_area_struct *vma) 
-{
-	unsigned int map_size, ret, map_offset;
-	struct vfc_dev *dev;
-	
-	dev = vfc_get_dev_ptr(iminor(file->f_path.dentry->d_inode));
-	if(dev == NULL)
-		return -ENODEV;
-
-	map_size = vma->vm_end - vma->vm_start;
-	if(map_size > sizeof(struct vfc_regs)) 
-		map_size = sizeof(struct vfc_regs);
-
-	vma->vm_flags |=
-		(VM_MAYREAD | VM_MAYWRITE | VM_MAYSHARE);
-	map_offset = (unsigned int) (long)dev->phys_regs;
-	ret = io_remap_pfn_range(vma, vma->vm_start,
-				  MK_IOSPACE_PFN(dev->which_io,
-					map_offset >> PAGE_SHIFT),
-				  map_size, vma->vm_page_prot);
-
-	if(ret)
-		return -EAGAIN;
-
-	return 0;
-}
-
-
-static const struct file_operations vfc_fops = {
-	.owner =	THIS_MODULE,
-	.llseek =	no_llseek,
-	.ioctl =	vfc_ioctl,
-	.mmap =		vfc_mmap,
-	.open =		vfc_open,
-	.release =	vfc_release,
-};
-
-static int vfc_probe(void)
-{
-	struct sbus_bus *sbus;
-	struct sbus_dev *sdev = NULL;
-	int ret;
-	int instance = 0, cards = 0;
-
-	for_all_sbusdev(sdev, sbus) {
-		if (strcmp(sdev->prom_name, "vfc") == 0) {
-			cards++;
-			continue;
-		}
-	}
-
-	if (!cards)
-		return -ENODEV;
-
-	vfc_dev_lst = kcalloc(cards + 1, sizeof(struct vfc_dev*), GFP_KERNEL);
-	if (vfc_dev_lst == NULL)
-		return -ENOMEM;
-	vfc_dev_lst[cards] = NULL;
-
-	ret = register_chrdev(VFC_MAJOR, vfcstr, &vfc_fops);
-	if(ret) {
-		printk(KERN_ERR "Unable to get major number %d\n", VFC_MAJOR);
-		kfree(vfc_dev_lst);
-		return -EIO;
-	}
-	instance = 0;
-	for_all_sbusdev(sdev, sbus) {
-		if (strcmp(sdev->prom_name, "vfc") == 0) {
-			vfc_dev_lst[instance]=(struct vfc_dev *)
-				kmalloc(sizeof(struct vfc_dev), GFP_KERNEL);
-			if (vfc_dev_lst[instance] == NULL)
-				return -ENOMEM;
-			ret = init_vfc_device(sdev,
-					      vfc_dev_lst[instance],
-					      instance);
-			if(ret) {
-				printk(KERN_ERR "Unable to initialize"
-				       " vfc%d device\n",
-				       instance);
-			} else {
-			}
-		
-			instance++;
-			continue;
-		}
-	}
-
-	return 0;
-}
-
-#ifdef MODULE
-int init_module(void)
-#else 
-int vfc_init(void)
-#endif
-{
-	return vfc_probe();
-}
-
-#ifdef MODULE
-static void deinit_vfc_device(struct vfc_dev *dev)
-{
-	if(dev == NULL)
-		return;
-	sbus_iounmap(dev->regs, sizeof(struct vfc_regs));
-	kfree(dev);
-}
-
-void cleanup_module(void)
-{
-	struct vfc_dev **devp;
-
-	unregister_chrdev(VFC_MAJOR,vfcstr);
-
-	for (devp = vfc_dev_lst; *devp; devp++)
-		deinit_vfc_device(*devp);
-
-	kfree(vfc_dev_lst);
-	return;
-}
-#endif
-
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/sbus/char/vfc_i2c.c b/drivers/sbus/char/vfc_i2c.c
deleted file mode 100644
index 32b986e0ed7..00000000000
--- a/drivers/sbus/char/vfc_i2c.c
+++ /dev/null
@@ -1,335 +0,0 @@
-/*
- * drivers/sbus/char/vfc_i2c.c
- *
- * Driver for the Videopix Frame Grabber.
- * 
- * Functions that support the Phillips i2c(I squared C) bus on the vfc
- *  Documentation for the Phillips I2C bus can be found on the 
- *  phillips home page
- *
- * Copyright (C) 1996 Manish Vachharajani (mvachhar@noc.rutgers.edu)
- *
- */
-
-/* NOTE: It seems to me that the documentation regarding the
-pcd8584t/pcf8584 does not show the correct way to address the i2c bus.
-Based on the information on the I2C bus itself and the remainder of
-the Phillips docs the following algorithms appear to be correct.  I am
-fairly certain that the flowcharts in the phillips docs are wrong. */
-
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/delay.h>
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/sbus.h>
-
-#if 0 
-#define VFC_I2C_DEBUG
-#endif
-
-#include "vfc.h"
-#include "vfc_i2c.h"
-
-#define WRITE_S1(__val) \
-	sbus_writel(__val, &dev->regs->i2c_s1)
-#define WRITE_REG(__val) \
-	sbus_writel(__val, &dev->regs->i2c_reg)
-
-#define VFC_I2C_READ (0x1)
-#define VFC_I2C_WRITE (0x0)
-     
-/****** 
-  The i2c bus controller chip on the VFC is a pcd8584t, but
-  phillips claims it doesn't exist.  As far as I can tell it is
-  identical to the PCF8584 so I treat it like it is the pcf8584.
-  
-  NOTE: The pcf8584 only cares
-  about the msb of the word you feed it 
-*****/
-
-int vfc_pcf8584_init(struct vfc_dev *dev) 
-{
-	/* This will also choose register S0_OWN so we can set it. */
-	WRITE_S1(RESET);
-
-	/* The pcf8584 shifts this value left one bit and uses
-	 * it as its i2c bus address.
-	 */
-	WRITE_REG(0x55000000);
-
-	/* This will set the i2c bus at the same speed sun uses,
-	 * and set another magic bit.
-	 */
-	WRITE_S1(SELECT(S2));
-	WRITE_REG(0x14000000);
-	
-	/* Enable the serial port, idle the i2c bus and set
-	 * the data reg to s0.
-	 */
-	WRITE_S1(CLEAR_I2C_BUS);
-	udelay(100);
-	return 0;
-}
-
-void vfc_i2c_delay_no_busy(struct vfc_dev *dev, unsigned long usecs) 
-{
-	schedule_timeout_uninterruptible(usecs_to_jiffies(usecs));
-}
-
-void inline vfc_i2c_delay(struct vfc_dev *dev) 
-{ 
-	vfc_i2c_delay_no_busy(dev, 100);
-}
-
-int vfc_init_i2c_bus(struct vfc_dev *dev)
-{
-	WRITE_S1(ENABLE_SERIAL | SELECT(S0) | ACK);
-	vfc_i2c_reset_bus(dev);
-	return 0;
-}
-
-int vfc_i2c_reset_bus(struct vfc_dev *dev) 
-{
-	VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: Resetting the i2c bus\n",
-			      dev->instance));
-	if(dev == NULL)
-		return -EINVAL;
-	if(dev->regs == NULL)
-		return -EINVAL;
-	WRITE_S1(SEND_I2C_STOP);
-	WRITE_S1(SEND_I2C_STOP | ACK);
-	vfc_i2c_delay(dev);
-	WRITE_S1(CLEAR_I2C_BUS);
-	VFC_I2C_DEBUG_PRINTK((KERN_DEBUG "vfc%d: I2C status %x\n",
-			      dev->instance,
-			      sbus_readl(&dev->regs->i2c_s1)));
-	return 0;
-}
-
-static int vfc_i2c_wait_for_bus(struct vfc_dev *dev)
-{
-	int timeout = 1000; 
-
-	while(!(sbus_readl(&dev->regs->i2c_s1) & BB)) {
-		if(!(timeout--))
-			return -ETIMEDOUT;
-		vfc_i2c_delay(dev);
-	}
-	return 0;
-}
-
-static int vfc_i2c_wait_for_pin(struct vfc_dev *dev, int ack)
-{
-	int timeout = 1000; 
-	int s1;
-
-	while ((s1 = sbus_readl(&dev->regs->i2c_s1)) & PIN) {
-		if (!(timeout--))
-			return -ETIMEDOUT;
-		vfc_i2c_delay(dev);
-	}
-	if (ack == VFC_I2C_ACK_CHECK) {
-		if(s1 & LRB)
-			return -EIO; 
-	}
-	return 0;
-}
-
-#define SHIFT(a) ((a) << 24)
-static int vfc_i2c_xmit_addr(struct vfc_dev *dev, unsigned char addr,
-			     char mode)
-{ 
-	int ret, raddr;
-#if 1
-	WRITE_S1(SEND_I2C_STOP | ACK);
-	WRITE_S1(SELECT(S0) | ENABLE_SERIAL);
-	vfc_i2c_delay(dev);
-#endif
-
-	switch(mode) {
-	case VFC_I2C_READ:
-		raddr = SHIFT(((unsigned int)addr | 0x1));
-		WRITE_REG(raddr);
-		VFC_I2C_DEBUG_PRINTK(("vfc%d: receiving from i2c addr 0x%x\n",
-				      dev->instance, addr | 0x1));
-		break;
-	case VFC_I2C_WRITE:
-		raddr = SHIFT((unsigned int)addr & ~0x1);
-		WRITE_REG(raddr);
-		VFC_I2C_DEBUG_PRINTK(("vfc%d: sending to i2c addr 0x%x\n",
-				      dev->instance, addr & ~0x1));
-		break;
-	default:
-		return -EINVAL;
-	};
-
-	WRITE_S1(SEND_I2C_START);
-	vfc_i2c_delay(dev);
-	ret = vfc_i2c_wait_for_pin(dev,VFC_I2C_ACK_CHECK); /* We wait
-							      for the
-							      i2c send
-							      to finish
-							      here but
-							      Sun
-							      doesn't,
-							      hmm */
-	if (ret) {
-		printk(KERN_ERR "vfc%d: VFC xmit addr timed out or no ack\n",
-		       dev->instance);
-		return ret;
-	} else if (mode == VFC_I2C_READ) {
-		if ((ret = sbus_readl(&dev->regs->i2c_reg) & 0xff000000) != raddr) {
-			printk(KERN_WARNING 
-			       "vfc%d: returned slave address "
-			       "mismatch(%x,%x)\n",
-			       dev->instance, raddr, ret);
-		}
-	}	
-	return 0;
-}
-
-static int vfc_i2c_xmit_byte(struct vfc_dev *dev,unsigned char *byte)
-{
-	int ret;
-	u32 val = SHIFT((unsigned int)*byte);
-
-	WRITE_REG(val);
-
-	ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_ACK_CHECK); 
-	switch(ret) {
-	case -ETIMEDOUT: 
-		printk(KERN_ERR "vfc%d: VFC xmit byte timed out or no ack\n",
-		       dev->instance);
-		break;
-	case -EIO:
-		ret = XMIT_LAST_BYTE;
-		break;
-	default:
-		break;
-	};
-
-	return ret;
-}
-
-static int vfc_i2c_recv_byte(struct vfc_dev *dev, unsigned char *byte,
-			     int last)
-{
-	int ret;
-
-	if (last) {
-		WRITE_REG(NEGATIVE_ACK);
-		VFC_I2C_DEBUG_PRINTK(("vfc%d: sending negative ack\n",
-				      dev->instance));
-	} else {
-		WRITE_S1(ACK);
-	}
-
-	ret = vfc_i2c_wait_for_pin(dev, VFC_I2C_NO_ACK_CHECK);
-	if(ret) {
-		printk(KERN_ERR "vfc%d: "
-		       "VFC recv byte timed out\n",
-		       dev->instance);
-	}
-	*byte = (sbus_readl(&dev->regs->i2c_reg)) >> 24;
-	return ret;
-}
-
-int vfc_i2c_recvbuf(struct vfc_dev *dev, unsigned char addr,
-		    char *buf, int count)
-{
-	int ret, last;
-
-	if(!(count && buf && dev && dev->regs) )
-		return -EINVAL;
-
-	if ((ret = vfc_i2c_wait_for_bus(dev))) {
-		printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance);
-		return ret;
-	}
-
-	if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_READ))) {
-		WRITE_S1(SEND_I2C_STOP);
-		vfc_i2c_delay(dev);
-		return ret;
-	}
-	
-	last = 0;
-	while (count--) {
-		if (!count)
-			last = 1;
-		if ((ret = vfc_i2c_recv_byte(dev, buf, last))) {
-			printk(KERN_ERR "vfc%d: "
-			       "VFC error while receiving byte\n",
-			       dev->instance);
-			WRITE_S1(SEND_I2C_STOP);
-			ret = -EINVAL;
-		}
-		buf++;
-	}
-	WRITE_S1(SEND_I2C_STOP | ACK);
-	vfc_i2c_delay(dev);
-	return ret;
-}
-
-int vfc_i2c_sendbuf(struct vfc_dev *dev, unsigned char addr, 
-		    char *buf, int count) 
-{
-	int ret;
-	
-	if (!(buf && dev && dev->regs))
-		return -EINVAL;
-	
-	if ((ret = vfc_i2c_wait_for_bus(dev))) {
-		printk(KERN_ERR "vfc%d: VFC I2C bus busy\n", dev->instance);
-		return ret;
-	}
-	
-	if ((ret = vfc_i2c_xmit_addr(dev, addr, VFC_I2C_WRITE))) {
-		WRITE_S1(SEND_I2C_STOP);
-		vfc_i2c_delay(dev);
-		return ret;
-	}
-	
-	while(count--) {
-		ret = vfc_i2c_xmit_byte(dev, buf);
-		switch(ret) {
-		case XMIT_LAST_BYTE:
-			VFC_I2C_DEBUG_PRINTK(("vfc%d: "
-					      "Receiver ended transmission with "
-					      " %d bytes remaining\n",
-					      dev->instance, count));
-			ret = 0;
-			goto done;
-			break;
-		case 0:
-			break;
-		default:
-			printk(KERN_ERR "vfc%d: "
-			       "VFC error while sending byte\n", dev->instance);
-			break;
-		};
-
-		buf++;
-	}
-done:
-	WRITE_S1(SEND_I2C_STOP | ACK);
-	vfc_i2c_delay(dev);
-	return ret;
-}
-
-
-
-
-
-
-
-
-
diff --git a/drivers/sbus/char/vfc_i2c.h b/drivers/sbus/char/vfc_i2c.h
deleted file mode 100644
index a2e6973209d..00000000000
--- a/drivers/sbus/char/vfc_i2c.h
+++ /dev/null
@@ -1,44 +0,0 @@
-#ifndef _LINUX_VFC_I2C_H_
-#define _LINUX_VFC_I2C_H_
-
-/* control bits */
-#define PIN  (0x80000000)
-#define ESO  (0x40000000)
-#define ES1  (0x20000000)
-#define ES2  (0x10000000)
-#define ENI  (0x08000000)
-#define STA  (0x04000000)
-#define STO  (0x02000000)
-#define ACK  (0x01000000)
-
-/* status bits */
-#define STS  (0x20000000)
-#define BER  (0x10000000)
-#define LRB  (0x08000000)
-#define AAS  (0x04000000)
-#define LAB  (0x02000000)
-#define BB   (0x01000000)
-
-#define SEND_I2C_START (PIN | ESO | STA)
-#define SEND_I2C_STOP (PIN | ESO | STO)
-#define CLEAR_I2C_BUS (PIN | ESO | ACK)
-#define NEGATIVE_ACK ((ESO) & ~ACK)
-
-#define SELECT(a) (a)
-#define S0 (PIN | ESO | ES1)
-#define S0_OWN (PIN)
-#define S2 (PIN | ES1)
-#define S3 (PIN | ES2)
-
-#define ENABLE_SERIAL (PIN | ESO)
-#define DISABLE_SERIAL (PIN)
-#define RESET (PIN)
-
-#define XMIT_LAST_BYTE (1)
-#define VFC_I2C_ACK_CHECK (1)
-#define VFC_I2C_NO_ACK_CHECK (0)
-
-#endif /* _LINUX_VFC_I2C_H_ */
-
-
-
diff --git a/drivers/sbus/dvma.c b/drivers/sbus/dvma.c
deleted file mode 100644
index ab0d2de3324..00000000000
--- a/drivers/sbus/dvma.c
+++ /dev/null
@@ -1,136 +0,0 @@
-/* dvma.c:  Routines that are used to access DMA on the Sparc SBus.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-
-#include <linux/string.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/oplib.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-#include <asm/sbus.h>
-
-struct sbus_dma *dma_chain;
-
-static void __init init_one_dvma(struct sbus_dma *dma, int num_dma)
-{
-	printk("dma%d: ", num_dma);
-	
-	dma->next = NULL;
-	dma->running = 0;      /* No transfers going on as of yet */
-	dma->allocated = 0;    /* No one has allocated us yet */
-	switch(sbus_readl(dma->regs + DMA_CSR)&DMA_DEVICE_ID) {
-	case DMA_VERS0:
-		dma->revision = dvmarev0;
-		printk("Revision 0 ");
-		break;
-	case DMA_ESCV1:
-		dma->revision = dvmaesc1;
-		printk("ESC Revision 1 ");
-		break;
-	case DMA_VERS1:
-		dma->revision = dvmarev1;
-		printk("Revision 1 ");
-		break;
-	case DMA_VERS2:
-		dma->revision = dvmarev2;
-		printk("Revision 2 ");
-		break;
-	case DMA_VERHME:
-		dma->revision = dvmahme;
-		printk("HME DVMA gate array ");
-		break;
-	case DMA_VERSPLUS:
-		dma->revision = dvmarevplus;
-		printk("Revision 1 PLUS ");
-		break;
-	default:
-		printk("unknown dma version %08x",
-		       sbus_readl(dma->regs + DMA_CSR) & DMA_DEVICE_ID);
-		dma->allocated = 1;
-		break;
-	}
-	printk("\n");
-}
-
-/* Probe this SBus DMA module(s) */
-void __init dvma_init(struct sbus_bus *sbus)
-{
-	struct sbus_dev *this_dev;
-	struct sbus_dma *dma;
-	struct sbus_dma *dchain;
-	static int num_dma = 0;
-
-	for_each_sbusdev(this_dev, sbus) {
-		char *name = this_dev->prom_name;
-		int hme = 0;
-
-		if(!strcmp(name, "SUNW,fas"))
-			hme = 1;
-		else if(strcmp(name, "dma") &&
-			strcmp(name, "ledma") &&
-			strcmp(name, "espdma"))
-			continue;
-
-		/* Found one... */
-		dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
-		dma->sdev = this_dev;
-
-		/* Put at end of dma chain */
-		dchain = dma_chain;
-		if(dchain) {
-			while(dchain->next)
-				dchain = dchain->next;
-			dchain->next = dma;
-		} else {
-			/* We're the first in line */
-			dma_chain = dma;
-		}
-
-		dma->regs = sbus_ioremap(&dma->sdev->resource[0], 0,
-					 dma->sdev->resource[0].end - dma->sdev->resource[0].start + 1,
-					 "dma");
-
-		dma->node = dma->sdev->prom_node;
-		
-		init_one_dvma(dma, num_dma++);
-	}
-}
-
-#ifdef CONFIG_SUN4
-
-#include <asm/sun4paddr.h>
-
-void __init sun4_dvma_init(void)
-{
-	struct sbus_dma *dma;
-	struct resource r;
-
-	if(sun4_dma_physaddr) {
-		dma = kmalloc(sizeof(struct sbus_dma), GFP_ATOMIC);
-
-		/* No SBUS */
-		dma->sdev = NULL;
-
-		/* Only one DMA device */
-		dma_chain = dma;
-
-		memset(&r, 0, sizeof(r));
-		r.start = sun4_dma_physaddr;
-		dma->regs = sbus_ioremap(&r, 0, PAGE_SIZE, "dma");
-
-		/* No prom node */
-		dma->node = 0x0;
-
-		init_one_dvma(dma, 0);
-	} else {
-	  	dma_chain = NULL;
-	}
-}
-
-#endif
diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c
deleted file mode 100644
index 9c129248466..00000000000
--- a/drivers/sbus/sbus.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/* sbus.c: SBus support routines.
- *
- * Copyright (C) 1995, 2006 David S. Miller (davem@davemloft.net)
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/of_device.h>
-
-#include <asm/system.h>
-#include <asm/sbus.h>
-#include <asm/dma.h>
-#include <asm/oplib.h>
-#include <asm/prom.h>
-#include <asm/bpp.h>
-#include <asm/irq.h>
-
-static ssize_t
-show_sbusobppath_attr(struct device * dev, struct device_attribute * attr, char * buf)
-{
-	struct sbus_dev *sbus;
-
-	sbus = to_sbus_device(dev);
-
-	return snprintf (buf, PAGE_SIZE, "%s\n", sbus->ofdev.node->full_name);
-}
-
-static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_sbusobppath_attr, NULL);
-
-struct sbus_bus *sbus_root;
-
-static void __init fill_sbus_device(struct device_node *dp, struct sbus_dev *sdev)
-{
-	struct dev_archdata *sd;
-	unsigned long base;
-	const void *pval;
-	int len, err;
-
-	sdev->prom_node = dp->node;
-	strcpy(sdev->prom_name, dp->name);
-
-	pval = of_get_property(dp, "reg", &len);
-	sdev->num_registers = 0;
-	if (pval) {
-		memcpy(sdev->reg_addrs, pval, len);
-
-		sdev->num_registers =
-			len / sizeof(struct linux_prom_registers);
-
-		base = (unsigned long) sdev->reg_addrs[0].phys_addr;
-
-		/* Compute the slot number. */
-		if (base >= SUN_SBUS_BVADDR && sparc_cpu_model == sun4m)
-			sdev->slot = sbus_dev_slot(base);
-		else
-			sdev->slot = sdev->reg_addrs[0].which_io;
-	}
-
-	pval = of_get_property(dp, "ranges", &len);
-	sdev->num_device_ranges = 0;
-	if (pval) {
-		memcpy(sdev->device_ranges, pval, len);
-		sdev->num_device_ranges =
-			len / sizeof(struct linux_prom_ranges);
-	}
-
-	sbus_fill_device_irq(sdev);
-
-	sd = &sdev->ofdev.dev.archdata;
-	sd->prom_node = dp;
-	sd->op = &sdev->ofdev;
-
-	sdev->ofdev.node = dp;
-	if (sdev->parent)
-		sdev->ofdev.dev.parent = &sdev->parent->ofdev.dev;
-	else
-		sdev->ofdev.dev.parent = &sdev->bus->ofdev.dev;
-	sdev->ofdev.dev.bus = &sbus_bus_type;
-	dev_set_name(&sdev->ofdev.dev, "sbus[%08x]", dp->node);
-
-	if (of_device_register(&sdev->ofdev) != 0)
-		printk(KERN_DEBUG "sbus: device registration error for %s!\n",
-		       dp->path_component_name);
-
-	/* WE HAVE BEEN INVADED BY ALIENS! */
-	err = sysfs_create_file(&sdev->ofdev.dev.kobj, &dev_attr_obppath.attr);
-}
-
-static void __init sbus_bus_ranges_init(struct device_node *dp, struct sbus_bus *sbus)
-{
-	const void *pval;
-	int len;
-
-	pval = of_get_property(dp, "ranges", &len);
-	sbus->num_sbus_ranges = 0;
-	if (pval) {
-		memcpy(sbus->sbus_ranges, pval, len);
-		sbus->num_sbus_ranges =
-			len / sizeof(struct linux_prom_ranges);
-
-		sbus_arch_bus_ranges_init(dp->parent, sbus);
-	}
-}
-
-static void __init __apply_ranges_to_regs(struct linux_prom_ranges *ranges,
-					  int num_ranges,
-					  struct linux_prom_registers *regs,
-					  int num_regs)
-{
-	if (num_ranges) {
-		int regnum;
-
-		for (regnum = 0; regnum < num_regs; regnum++) {
-			int rngnum;
-
-			for (rngnum = 0; rngnum < num_ranges; rngnum++) {
-				if (regs[regnum].which_io == ranges[rngnum].ot_child_space)
-					break;
-			}
-			if (rngnum == num_ranges) {
-				/* We used to flag this as an error.  Actually
-				 * some devices do not report the regs as we expect.
-				 * For example, see SUNW,pln device.  In that case
-				 * the reg property is in a format internal to that
-				 * node, ie. it is not in the SBUS register space
-				 * per se. -DaveM
-				 */
-				return;
-			}
-			regs[regnum].which_io = ranges[rngnum].ot_parent_space;
-			regs[regnum].phys_addr -= ranges[rngnum].ot_child_base;
-			regs[regnum].phys_addr += ranges[rngnum].ot_parent_base;
-		}
-	}
-}
-
-static void __init __fixup_regs_sdev(struct sbus_dev *sdev)
-{
-	if (sdev->num_registers != 0) {
-		struct sbus_dev *parent = sdev->parent;
-		int i;
-
-		while (parent != NULL) {
-			__apply_ranges_to_regs(parent->device_ranges,
-					       parent->num_device_ranges,
-					       sdev->reg_addrs,
-					       sdev->num_registers);
-
-			parent = parent->parent;
-		}
-
-		__apply_ranges_to_regs(sdev->bus->sbus_ranges,
-				       sdev->bus->num_sbus_ranges,
-				       sdev->reg_addrs,
-				       sdev->num_registers);
-
-		for (i = 0; i < sdev->num_registers; i++) {
-			struct resource *res = &sdev->resource[i];
-
-			res->start = sdev->reg_addrs[i].phys_addr;
-			res->end = (res->start +
-				    (unsigned long)sdev->reg_addrs[i].reg_size - 1UL);
-			res->flags = IORESOURCE_IO |
-				(sdev->reg_addrs[i].which_io & 0xff);
-		}
-	}
-}
-
-static void __init sbus_fixup_all_regs(struct sbus_dev *first_sdev)
-{
-	struct sbus_dev *sdev;
-
-	for (sdev = first_sdev; sdev; sdev = sdev->next) {
-		if (sdev->child)
-			sbus_fixup_all_regs(sdev->child);
-		__fixup_regs_sdev(sdev);
-	}
-}
-
-/* We preserve the "probe order" of these bus and device lists to give
- * the same ordering as the old code.
- */
-static void __init sbus_insert(struct sbus_bus *sbus, struct sbus_bus **root)
-{
-	while (*root)
-		root = &(*root)->next;
-	*root = sbus;
-	sbus->next = NULL;
-}
-
-static void __init sdev_insert(struct sbus_dev *sdev, struct sbus_dev **root)
-{
-	while (*root)
-		root = &(*root)->next;
-	*root = sdev;
-	sdev->next = NULL;
-}
-
-static void __init walk_children(struct device_node *dp, struct sbus_dev *parent, struct sbus_bus *sbus)
-{
-	dp = dp->child;
-	while (dp) {
-		struct sbus_dev *sdev;
-
-		sdev = kzalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
-		if (sdev) {
-			sdev_insert(sdev, &parent->child);
-
-			sdev->bus = sbus;
-			sdev->parent = parent;
-			sdev->ofdev.dev.archdata.iommu =
-				sbus->ofdev.dev.archdata.iommu;
-			sdev->ofdev.dev.archdata.stc =
-				sbus->ofdev.dev.archdata.stc;
-
-			fill_sbus_device(dp, sdev);
-
-			walk_children(dp, sdev, sbus);
-		}
-		dp = dp->sibling;
-	}
-}
-
-static void __init build_one_sbus(struct device_node *dp, int num_sbus)
-{
-	struct sbus_bus *sbus;
-	unsigned int sbus_clock;
-	struct device_node *dev_dp;
-
-	sbus = kzalloc(sizeof(struct sbus_bus), GFP_ATOMIC);
-	if (!sbus)
-		return;
-
-	sbus_insert(sbus, &sbus_root);
-	sbus->prom_node = dp->node;
-
-	sbus_setup_iommu(sbus, dp);
-
-	printk("sbus%d: ", num_sbus);
-
-	sbus_clock = of_getintprop_default(dp, "clock-frequency",
-					   (25*1000*1000));
-	sbus->clock_freq = sbus_clock;
-
-	printk("Clock %d.%d MHz\n", (int) ((sbus_clock/1000)/1000),
-	       (int) (((sbus_clock/1000)%1000 != 0) ? 
-		      (((sbus_clock/1000)%1000) + 1000) : 0));
-
-	strcpy(sbus->prom_name, dp->name);
-
-	sbus_setup_arch_props(sbus, dp);
-
-	sbus_bus_ranges_init(dp, sbus);
-
-	sbus->ofdev.node = dp;
-	sbus->ofdev.dev.parent = NULL;
-	sbus->ofdev.dev.bus = &sbus_bus_type;
-	dev_set_name(&sbus->ofdev.dev, "sbus%d", num_sbus);
-
-	if (of_device_register(&sbus->ofdev) != 0)
-		printk(KERN_DEBUG "sbus: device registration error for %s!\n",
-		       dev_name(&sbus->ofdev.dev));
-
-	dev_dp = dp->child;
-	while (dev_dp) {
-		struct sbus_dev *sdev;
-
-		sdev = kzalloc(sizeof(struct sbus_dev), GFP_ATOMIC);
-		if (sdev) {
-			sdev_insert(sdev, &sbus->devices);
-
-			sdev->bus = sbus;
-			sdev->parent = NULL;
-			sdev->ofdev.dev.archdata.iommu =
-				sbus->ofdev.dev.archdata.iommu;
-			sdev->ofdev.dev.archdata.stc =
-				sbus->ofdev.dev.archdata.stc;
-
-			fill_sbus_device(dev_dp, sdev);
-
-			walk_children(dev_dp, sdev, sbus);
-		}
-		dev_dp = dev_dp->sibling;
-	}
-
-	sbus_fixup_all_regs(sbus->devices);
-
-	dvma_init(sbus);
-}
-
-static int __init sbus_init(void)
-{
-	struct device_node *dp;
-	const char *sbus_name = "sbus";
-	int num_sbus = 0;
-
-	if (sbus_arch_preinit())
-		return 0;
-
-	if (sparc_cpu_model == sun4d)
-		sbus_name = "sbi";
-
-	for_each_node_by_name(dp, sbus_name) {
-		build_one_sbus(dp, num_sbus);
-		num_sbus++;
-
-	}
-
-	sbus_arch_postinit();
-
-	return 0;
-}
-
-subsys_initcall(sbus_init);