Linux-2.6.12-rc2v2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 3574 insertions, 0 deletions

diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
new file mode 100644
index 00000000000..41b5197ce4e
--- /dev/null
+++ b/drivers/scsi/BusLogic.c
@@ -0,0 +1,3574 @@
+
+/*
+
+  Linux Driver for BusLogic MultiMaster and FlashPoint SCSI Host Adapters
+
+  Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com>
+
+  This program is free software; you may redistribute and/or modify it under
+  the terms of the GNU General Public License Version 2 as published by the
+  Free Software Foundation.
+
+  This program is distributed in the hope that it will be useful, but
+  WITHOUT ANY WARRANTY, without even the implied warranty of MERCHANTABILITY
+  or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+  for complete details.
+
+  The author respectfully requests that any modifications to this software be
+  sent directly to him for evaluation and testing.
+
+  Special thanks to Wayne Yen, Jin-Lon Hon, and Alex Win of BusLogic, whose
+  advice has been invaluable, to David Gentzel, for writing the original Linux
+  BusLogic driver, and to Paul Gortmaker, for being such a dedicated test site.
+
+  Finally, special thanks to Mylex/BusLogic for making the FlashPoint SCCB
+  Manager available as freely redistributable source code.
+
+*/
+
+#define BusLogic_DriverVersion		"2.1.16"
+#define BusLogic_DriverDate		"18 July 2002"
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/stat.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <scsi/scsicam.h>
+
+#include <asm/dma.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include "BusLogic.h"
+#include "FlashPoint.c"
+
+#ifndef FAILURE
+#define FAILURE (-1)
+#endif
+
+static struct scsi_host_template Bus_Logic_template;
+
+/*
+  BusLogic_DriverOptionsCount is a count of the number of BusLogic Driver
+  Options specifications provided via the Linux Kernel Command Line or via
+  the Loadable Kernel Module Installation Facility.
+*/
+
+static int BusLogic_DriverOptionsCount;
+
+
+/*
+  BusLogic_DriverOptions is an array of Driver Options structures representing
+  BusLogic Driver Options specifications provided via the Linux Kernel Command
+  Line or via the Loadable Kernel Module Installation Facility.
+*/
+
+static struct BusLogic_DriverOptions BusLogic_DriverOptions[BusLogic_MaxHostAdapters];
+
+
+/*
+  BusLogic can be assigned a string by insmod.
+*/
+
+MODULE_LICENSE("GPL");
+#ifdef MODULE
+static char *BusLogic;
+module_param(BusLogic, charp, 0);
+#endif
+
+
+/*
+  BusLogic_ProbeOptions is a set of Probe Options to be applied across
+  all BusLogic Host Adapters.
+*/
+
+static struct BusLogic_ProbeOptions BusLogic_ProbeOptions;
+
+
+/*
+  BusLogic_GlobalOptions is a set of Global Options to be applied across
+  all BusLogic Host Adapters.
+*/
+
+static struct BusLogic_GlobalOptions BusLogic_GlobalOptions;
+
+static LIST_HEAD(BusLogic_host_list);
+
+/*
+  BusLogic_ProbeInfoCount is the number of entries in BusLogic_ProbeInfoList.
+*/
+
+static int BusLogic_ProbeInfoCount;
+
+
+/*
+  BusLogic_ProbeInfoList is the list of I/O Addresses and Bus Probe Information
+  to be checked for potential BusLogic Host Adapters.  It is initialized by
+  interrogating the PCI Configuration Space on PCI machines as well as from the
+  list of standard BusLogic I/O Addresses.
+*/
+
+static struct BusLogic_ProbeInfo *BusLogic_ProbeInfoList;
+
+
+/*
+  BusLogic_CommandFailureReason holds a string identifying the reason why a
+  call to BusLogic_Command failed.  It is only non-NULL when BusLogic_Command
+  returns a failure code.
+*/
+
+static char *BusLogic_CommandFailureReason;
+
+/*
+  BusLogic_AnnounceDriver announces the Driver Version and Date, Author's
+  Name, Copyright Notice, and Electronic Mail Address.
+*/
+
+static void BusLogic_AnnounceDriver(struct BusLogic_HostAdapter *HostAdapter)
+{
+	BusLogic_Announce("***** BusLogic SCSI Driver Version " BusLogic_DriverVersion " of " BusLogic_DriverDate " *****\n", HostAdapter);
+	BusLogic_Announce("Copyright 1995-1998 by Leonard N. Zubkoff " "<lnz@dandelion.com>\n", HostAdapter);
+}
+
+
+/*
+  BusLogic_DriverInfo returns the Host Adapter Name to identify this SCSI
+  Driver and Host Adapter.
+*/
+
+static const char *BusLogic_DriverInfo(struct Scsi_Host *Host)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
+	return HostAdapter->FullModelName;
+}
+
+/*
+  BusLogic_InitializeCCBs initializes a group of Command Control Blocks (CCBs)
+  for Host Adapter from the BlockSize bytes located at BlockPointer.  The newly
+  created CCBs are added to Host Adapter's free list.
+*/
+
+static void BusLogic_InitializeCCBs(struct BusLogic_HostAdapter *HostAdapter, void *BlockPointer, int BlockSize, dma_addr_t BlockPointerHandle)
+{
+	struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) BlockPointer;
+	unsigned int offset = 0;
+	memset(BlockPointer, 0, BlockSize);
+	CCB->AllocationGroupHead = BlockPointerHandle;
+	CCB->AllocationGroupSize = BlockSize;
+	while ((BlockSize -= sizeof(struct BusLogic_CCB)) >= 0) {
+		CCB->Status = BusLogic_CCB_Free;
+		CCB->HostAdapter = HostAdapter;
+		CCB->DMA_Handle = (u32) BlockPointerHandle + offset;
+		if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
+			CCB->CallbackFunction = BusLogic_QueueCompletedCCB;
+			CCB->BaseAddress = HostAdapter->FlashPointInfo.BaseAddress;
+		}
+		CCB->Next = HostAdapter->Free_CCBs;
+		CCB->NextAll = HostAdapter->All_CCBs;
+		HostAdapter->Free_CCBs = CCB;
+		HostAdapter->All_CCBs = CCB;
+		HostAdapter->AllocatedCCBs++;
+		CCB++;
+		offset += sizeof(struct BusLogic_CCB);
+	}
+}
+
+
+/*
+  BusLogic_CreateInitialCCBs allocates the initial CCBs for Host Adapter.
+*/
+
+static boolean __init BusLogic_CreateInitialCCBs(struct BusLogic_HostAdapter *HostAdapter)
+{
+	int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
+	void *BlockPointer;
+	dma_addr_t BlockPointerHandle;
+	while (HostAdapter->AllocatedCCBs < HostAdapter->InitialCCBs) {
+		BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
+		if (BlockPointer == NULL) {
+			BusLogic_Error("UNABLE TO ALLOCATE CCB GROUP - DETACHING\n", HostAdapter);
+			return false;
+		}
+		BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
+	}
+	return true;
+}
+
+
+/*
+  BusLogic_DestroyCCBs deallocates the CCBs for Host Adapter.
+*/
+
+static void BusLogic_DestroyCCBs(struct BusLogic_HostAdapter *HostAdapter)
+{
+	struct BusLogic_CCB *NextCCB = HostAdapter->All_CCBs, *CCB, *Last_CCB = NULL;
+	HostAdapter->All_CCBs = NULL;
+	HostAdapter->Free_CCBs = NULL;
+	while ((CCB = NextCCB) != NULL) {
+		NextCCB = CCB->NextAll;
+		if (CCB->AllocationGroupHead) {
+			if (Last_CCB)
+				pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
+			Last_CCB = CCB;
+		}
+	}
+	if (Last_CCB)
+		pci_free_consistent(HostAdapter->PCI_Device, Last_CCB->AllocationGroupSize, Last_CCB, Last_CCB->AllocationGroupHead);
+}
+
+
+/*
+  BusLogic_CreateAdditionalCCBs allocates Additional CCBs for Host Adapter.  If
+  allocation fails and there are no remaining CCBs available, the Driver Queue
+  Depth is decreased to a known safe value to avoid potential deadlocks when
+  multiple host adapters share the same IRQ Channel.
+*/
+
+static void BusLogic_CreateAdditionalCCBs(struct BusLogic_HostAdapter *HostAdapter, int AdditionalCCBs, boolean SuccessMessageP)
+{
+	int BlockSize = BusLogic_CCB_AllocationGroupSize * sizeof(struct BusLogic_CCB);
+	int PreviouslyAllocated = HostAdapter->AllocatedCCBs;
+	void *BlockPointer;
+	dma_addr_t BlockPointerHandle;
+	if (AdditionalCCBs <= 0)
+		return;
+	while (HostAdapter->AllocatedCCBs - PreviouslyAllocated < AdditionalCCBs) {
+		BlockPointer = pci_alloc_consistent(HostAdapter->PCI_Device, BlockSize, &BlockPointerHandle);
+		if (BlockPointer == NULL)
+			break;
+		BusLogic_InitializeCCBs(HostAdapter, BlockPointer, BlockSize, BlockPointerHandle);
+	}
+	if (HostAdapter->AllocatedCCBs > PreviouslyAllocated) {
+		if (SuccessMessageP)
+			BusLogic_Notice("Allocated %d additional CCBs (total now %d)\n", HostAdapter, HostAdapter->AllocatedCCBs - PreviouslyAllocated, HostAdapter->AllocatedCCBs);
+		return;
+	}
+	BusLogic_Notice("Failed to allocate additional CCBs\n", HostAdapter);
+	if (HostAdapter->DriverQueueDepth > HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount) {
+		HostAdapter->DriverQueueDepth = HostAdapter->AllocatedCCBs - HostAdapter->TargetDeviceCount;
+		HostAdapter->SCSI_Host->can_queue = HostAdapter->DriverQueueDepth;
+	}
+}
+
+/*
+  BusLogic_AllocateCCB allocates a CCB from Host Adapter's free list,
+  allocating more memory from the Kernel if necessary.  The Host Adapter's
+  Lock should already have been acquired by the caller.
+*/
+
+static struct BusLogic_CCB *BusLogic_AllocateCCB(struct BusLogic_HostAdapter
+						 *HostAdapter)
+{
+	static unsigned long SerialNumber = 0;
+	struct BusLogic_CCB *CCB;
+	CCB = HostAdapter->Free_CCBs;
+	if (CCB != NULL) {
+		CCB->SerialNumber = ++SerialNumber;
+		HostAdapter->Free_CCBs = CCB->Next;
+		CCB->Next = NULL;
+		if (HostAdapter->Free_CCBs == NULL)
+			BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
+		return CCB;
+	}
+	BusLogic_CreateAdditionalCCBs(HostAdapter, HostAdapter->IncrementalCCBs, true);
+	CCB = HostAdapter->Free_CCBs;
+	if (CCB == NULL)
+		return NULL;
+	CCB->SerialNumber = ++SerialNumber;
+	HostAdapter->Free_CCBs = CCB->Next;
+	CCB->Next = NULL;
+	return CCB;
+}
+
+
+/*
+  BusLogic_DeallocateCCB deallocates a CCB, returning it to the Host Adapter's
+  free list.  The Host Adapter's Lock should already have been acquired by the
+  caller.
+*/
+
+static void BusLogic_DeallocateCCB(struct BusLogic_CCB *CCB)
+{
+	struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
+	struct scsi_cmnd *cmd = CCB->Command;
+
+	if (cmd->use_sg != 0) {
+		pci_unmap_sg(HostAdapter->PCI_Device,
+				(struct scatterlist *)cmd->request_buffer,
+				cmd->use_sg, cmd->sc_data_direction);
+	} else if (cmd->request_bufflen != 0) {
+		pci_unmap_single(HostAdapter->PCI_Device, CCB->DataPointer,
+				CCB->DataLength, cmd->sc_data_direction);
+	}
+	pci_unmap_single(HostAdapter->PCI_Device, CCB->SenseDataPointer,
+			CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
+
+	CCB->Command = NULL;
+	CCB->Status = BusLogic_CCB_Free;
+	CCB->Next = HostAdapter->Free_CCBs;
+	HostAdapter->Free_CCBs = CCB;
+}
+
+
+/*
+  BusLogic_Command sends the command OperationCode to HostAdapter, optionally
+  providing ParameterLength bytes of ParameterData and receiving at most
+  ReplyLength bytes of ReplyData; any excess reply data is received but
+  discarded.
+
+  On success, this function returns the number of reply bytes read from
+  the Host Adapter (including any discarded data); on failure, it returns
+  -1 if the command was invalid, or -2 if a timeout occurred.
+
+  BusLogic_Command is called exclusively during host adapter detection and
+  initialization, so performance and latency are not critical, and exclusive
+  access to the Host Adapter hardware is assumed.  Once the host adapter and
+  driver are initialized, the only Host Adapter command that is issued is the
+  single byte Execute Mailbox Command operation code, which does not require
+  waiting for the Host Adapter Ready bit to be set in the Status Register.
+*/
+
+static int BusLogic_Command(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_OperationCode OperationCode, void *ParameterData, int ParameterLength, void *ReplyData, int ReplyLength)
+{
+	unsigned char *ParameterPointer = (unsigned char *) ParameterData;
+	unsigned char *ReplyPointer = (unsigned char *) ReplyData;
+	union BusLogic_StatusRegister StatusRegister;
+	union BusLogic_InterruptRegister InterruptRegister;
+	unsigned long ProcessorFlags = 0;
+	int ReplyBytes = 0, Result;
+	long TimeoutCounter;
+	/*
+	   Clear out the Reply Data if provided.
+	 */
+	if (ReplyLength > 0)
+		memset(ReplyData, 0, ReplyLength);
+	/*
+	   If the IRQ Channel has not yet been acquired, then interrupts must be
+	   disabled while issuing host adapter commands since a Command Complete
+	   interrupt could occur if the IRQ Channel was previously enabled by another
+	   BusLogic Host Adapter or another driver sharing the same IRQ Channel.
+	 */
+	if (!HostAdapter->IRQ_ChannelAcquired) {
+		local_irq_save(ProcessorFlags);
+		local_irq_disable();
+	}
+	/*
+	   Wait for the Host Adapter Ready bit to be set and the Command/Parameter
+	   Register Busy bit to be reset in the Status Register.
+	 */
+	TimeoutCounter = 10000;
+	while (--TimeoutCounter >= 0) {
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (StatusRegister.sr.HostAdapterReady && !StatusRegister.sr.CommandParameterRegisterBusy)
+			break;
+		udelay(100);
+	}
+	if (TimeoutCounter < 0) {
+		BusLogic_CommandFailureReason = "Timeout waiting for Host Adapter Ready";
+		Result = -2;
+		goto Done;
+	}
+	/*
+	   Write the OperationCode to the Command/Parameter Register.
+	 */
+	HostAdapter->HostAdapterCommandCompleted = false;
+	BusLogic_WriteCommandParameterRegister(HostAdapter, OperationCode);
+	/*
+	   Write any additional Parameter Bytes.
+	 */
+	TimeoutCounter = 10000;
+	while (ParameterLength > 0 && --TimeoutCounter >= 0) {
+		/*
+		   Wait 100 microseconds to give the Host Adapter enough time to determine
+		   whether the last value written to the Command/Parameter Register was
+		   valid or not.  If the Command Complete bit is set in the Interrupt
+		   Register, then the Command Invalid bit in the Status Register will be
+		   reset if the Operation Code or Parameter was valid and the command
+		   has completed, or set if the Operation Code or Parameter was invalid.
+		   If the Data In Register Ready bit is set in the Status Register, then
+		   the Operation Code was valid, and data is waiting to be read back
+		   from the Host Adapter.  Otherwise, wait for the Command/Parameter
+		   Register Busy bit in the Status Register to be reset.
+		 */
+		udelay(100);
+		InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (InterruptRegister.ir.CommandComplete)
+			break;
+		if (HostAdapter->HostAdapterCommandCompleted)
+			break;
+		if (StatusRegister.sr.DataInRegisterReady)
+			break;
+		if (StatusRegister.sr.CommandParameterRegisterBusy)
+			continue;
+		BusLogic_WriteCommandParameterRegister(HostAdapter, *ParameterPointer++);
+		ParameterLength--;
+	}
+	if (TimeoutCounter < 0) {
+		BusLogic_CommandFailureReason = "Timeout waiting for Parameter Acceptance";
+		Result = -2;
+		goto Done;
+	}
+	/*
+	   The Modify I/O Address command does not cause a Command Complete Interrupt.
+	 */
+	if (OperationCode == BusLogic_ModifyIOAddress) {
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (StatusRegister.sr.CommandInvalid) {
+			BusLogic_CommandFailureReason = "Modify I/O Address Invalid";
+			Result = -1;
+			goto Done;
+		}
+		if (BusLogic_GlobalOptions.TraceConfiguration)
+			BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: " "(Modify I/O Address)\n", HostAdapter, OperationCode, StatusRegister.All);
+		Result = 0;
+		goto Done;
+	}
+	/*
+	   Select an appropriate timeout value for awaiting command completion.
+	 */
+	switch (OperationCode) {
+	case BusLogic_InquireInstalledDevicesID0to7:
+	case BusLogic_InquireInstalledDevicesID8to15:
+	case BusLogic_InquireTargetDevices:
+		/* Approximately 60 seconds. */
+		TimeoutCounter = 60 * 10000;
+		break;
+	default:
+		/* Approximately 1 second. */
+		TimeoutCounter = 10000;
+		break;
+	}
+	/*
+	   Receive any Reply Bytes, waiting for either the Command Complete bit to
+	   be set in the Interrupt Register, or for the Interrupt Handler to set the
+	   Host Adapter Command Completed bit in the Host Adapter structure.
+	 */
+	while (--TimeoutCounter >= 0) {
+		InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (InterruptRegister.ir.CommandComplete)
+			break;
+		if (HostAdapter->HostAdapterCommandCompleted)
+			break;
+		if (StatusRegister.sr.DataInRegisterReady) {
+			if (++ReplyBytes <= ReplyLength)
+				*ReplyPointer++ = BusLogic_ReadDataInRegister(HostAdapter);
+			else
+				BusLogic_ReadDataInRegister(HostAdapter);
+		}
+		if (OperationCode == BusLogic_FetchHostAdapterLocalRAM && StatusRegister.sr.HostAdapterReady)
+			break;
+		udelay(100);
+	}
+	if (TimeoutCounter < 0) {
+		BusLogic_CommandFailureReason = "Timeout waiting for Command Complete";
+		Result = -2;
+		goto Done;
+	}
+	/*
+	   Clear any pending Command Complete Interrupt.
+	 */
+	BusLogic_InterruptReset(HostAdapter);
+	/*
+	   Provide tracing information if requested.
+	 */
+	if (BusLogic_GlobalOptions.TraceConfiguration) {
+		int i;
+		BusLogic_Notice("BusLogic_Command(%02X) Status = %02X: %2d ==> %2d:", HostAdapter, OperationCode, StatusRegister.All, ReplyLength, ReplyBytes);
+		if (ReplyLength > ReplyBytes)
+			ReplyLength = ReplyBytes;
+		for (i = 0; i < ReplyLength; i++)
+			BusLogic_Notice(" %02X", HostAdapter, ((unsigned char *) ReplyData)[i]);
+		BusLogic_Notice("\n", HostAdapter);
+	}
+	/*
+	   Process Command Invalid conditions.
+	 */
+	if (StatusRegister.sr.CommandInvalid) {
+		/*
+		   Some early BusLogic Host Adapters may not recover properly from
+		   a Command Invalid condition, so if this appears to be the case,
+		   a Soft Reset is issued to the Host Adapter.  Potentially invalid
+		   commands are never attempted after Mailbox Initialization is
+		   performed, so there should be no Host Adapter state lost by a
+		   Soft Reset in response to a Command Invalid condition.
+		 */
+		udelay(1000);
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (StatusRegister.sr.CommandInvalid ||
+		    StatusRegister.sr.Reserved ||
+		    StatusRegister.sr.DataInRegisterReady ||
+		    StatusRegister.sr.CommandParameterRegisterBusy || !StatusRegister.sr.HostAdapterReady || !StatusRegister.sr.InitializationRequired || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.DiagnosticFailure) {
+			BusLogic_SoftReset(HostAdapter);
+			udelay(1000);
+		}
+		BusLogic_CommandFailureReason = "Command Invalid";
+		Result = -1;
+		goto Done;
+	}
+	/*
+	   Handle Excess Parameters Supplied conditions.
+	 */
+	if (ParameterLength > 0) {
+		BusLogic_CommandFailureReason = "Excess Parameters Supplied";
+		Result = -1;
+		goto Done;
+	}
+	/*
+	   Indicate the command completed successfully.
+	 */
+	BusLogic_CommandFailureReason = NULL;
+	Result = ReplyBytes;
+	/*
+	   Restore the interrupt status if necessary and return.
+	 */
+      Done:
+	if (!HostAdapter->IRQ_ChannelAcquired)
+		local_irq_restore(ProcessorFlags);
+	return Result;
+}
+
+
+/*
+  BusLogic_AppendProbeAddressISA appends a single ISA I/O Address to the list
+  of I/O Address and Bus Probe Information to be checked for potential BusLogic
+  Host Adapters.
+*/
+
+static void __init BusLogic_AppendProbeAddressISA(unsigned long IO_Address)
+{
+	struct BusLogic_ProbeInfo *ProbeInfo;
+	if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
+		return;
+	ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
+	ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
+	ProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
+	ProbeInfo->IO_Address = IO_Address;
+	ProbeInfo->PCI_Device = NULL;
+}
+
+
+/*
+  BusLogic_InitializeProbeInfoListISA initializes the list of I/O Address and
+  Bus Probe Information to be checked for potential BusLogic SCSI Host Adapters
+  only from the list of standard BusLogic MultiMaster ISA I/O Addresses.
+*/
+
+static void __init BusLogic_InitializeProbeInfoListISA(struct BusLogic_HostAdapter
+						       *PrototypeHostAdapter)
+{
+	/*
+	   If BusLogic Driver Options specifications requested that ISA Bus Probes
+	   be inhibited, do not proceed further.
+	 */
+	if (BusLogic_ProbeOptions.NoProbeISA)
+		return;
+	/*
+	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses.
+	 */
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x330);
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x334);
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x230);
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x234);
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x130);
+	if (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0)
+		BusLogic_AppendProbeAddressISA(0x134);
+}
+
+
+#ifdef CONFIG_PCI
+
+
+/*
+  BusLogic_SortProbeInfo sorts a section of BusLogic_ProbeInfoList in order
+  of increasing PCI Bus and Device Number.
+*/
+
+static void __init BusLogic_SortProbeInfo(struct BusLogic_ProbeInfo *ProbeInfoList, int ProbeInfoCount)
+{
+	int LastInterchange = ProbeInfoCount - 1, Bound, j;
+	while (LastInterchange > 0) {
+		Bound = LastInterchange;
+		LastInterchange = 0;
+		for (j = 0; j < Bound; j++) {
+			struct BusLogic_ProbeInfo *ProbeInfo1 = &ProbeInfoList[j];
+			struct BusLogic_ProbeInfo *ProbeInfo2 = &ProbeInfoList[j + 1];
+			if (ProbeInfo1->Bus > ProbeInfo2->Bus || (ProbeInfo1->Bus == ProbeInfo2->Bus && (ProbeInfo1->Device > ProbeInfo2->Device))) {
+				struct BusLogic_ProbeInfo TempProbeInfo;
+				memcpy(&TempProbeInfo, ProbeInfo1, sizeof(struct BusLogic_ProbeInfo));
+				memcpy(ProbeInfo1, ProbeInfo2, sizeof(struct BusLogic_ProbeInfo));
+				memcpy(ProbeInfo2, &TempProbeInfo, sizeof(struct BusLogic_ProbeInfo));
+				LastInterchange = j;
+			}
+		}
+	}
+}
+
+
+/*
+  BusLogic_InitializeMultiMasterProbeInfo initializes the list of I/O Address
+  and Bus Probe Information to be checked for potential BusLogic MultiMaster
+  SCSI Host Adapters by interrogating the PCI Configuration Space on PCI
+  machines as well as from the list of standard BusLogic MultiMaster ISA
+  I/O Addresses.  It returns the number of PCI MultiMaster Host Adapters found.
+*/
+
+static int __init BusLogic_InitializeMultiMasterProbeInfo(struct BusLogic_HostAdapter
+							  *PrototypeHostAdapter)
+{
+	struct BusLogic_ProbeInfo *PrimaryProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount];
+	int NonPrimaryPCIMultiMasterIndex = BusLogic_ProbeInfoCount + 1;
+	int NonPrimaryPCIMultiMasterCount = 0, PCIMultiMasterCount = 0;
+	boolean ForceBusDeviceScanningOrder = false;
+	boolean ForceBusDeviceScanningOrderChecked = false;
+	boolean StandardAddressSeen[6];
+	struct pci_dev *PCI_Device = NULL;
+	int i;
+	if (BusLogic_ProbeInfoCount >= BusLogic_MaxHostAdapters)
+		return 0;
+	BusLogic_ProbeInfoCount++;
+	for (i = 0; i < 6; i++)
+		StandardAddressSeen[i] = false;
+	/*
+	   Iterate over the MultiMaster PCI Host Adapters.  For each enumerated host
+	   adapter, determine whether its ISA Compatible I/O Port is enabled and if
+	   so, whether it is assigned the Primary I/O Address.  A host adapter that is
+	   assigned the Primary I/O Address will always be the preferred boot device.
+	   The MultiMaster BIOS will first recognize a host adapter at the Primary I/O
+	   Address, then any other PCI host adapters, and finally any host adapters
+	   located at the remaining standard ISA I/O Addresses.  When a PCI host
+	   adapter is found with its ISA Compatible I/O Port enabled, a command is
+	   issued to disable the ISA Compatible I/O Port, and it is noted that the
+	   particular standard ISA I/O Address need not be probed.
+	 */
+	PrimaryProbeInfo->IO_Address = 0;
+	while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER, PCI_Device)) != NULL) {
+		struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
+		struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
+		enum BusLogic_ISACompatibleIOPort ModifyIOAddressRequest;
+		unsigned char Bus;
+		unsigned char Device;
+		unsigned int IRQ_Channel;
+		unsigned long BaseAddress0;
+		unsigned long BaseAddress1;
+		unsigned long IO_Address;
+		unsigned long PCI_Address;
+
+		if (pci_enable_device(PCI_Device))
+			continue;
+
+		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+			continue;
+
+		Bus = PCI_Device->bus->number;
+		Device = PCI_Device->devfn >> 3;
+		IRQ_Channel = PCI_Device->irq;
+		IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
+		PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
+
+		if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
+			BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "MultiMaster Host Adapter\n", NULL, BaseAddress0);
+			BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
+			continue;
+		}
+		if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
+			BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "MultiMaster Host Adapter\n", NULL, BaseAddress1);
+			BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
+			continue;
+		}
+		if (IRQ_Channel == 0) {
+			BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "MultiMaster Host Adapter\n", NULL, IRQ_Channel);
+			BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
+			continue;
+		}
+		if (BusLogic_GlobalOptions.TraceProbe) {
+			BusLogic_Notice("BusLogic: PCI MultiMaster Host Adapter " "detected at\n", NULL);
+			BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
+		}
+		/*
+		   Issue the Inquire PCI Host Adapter Information command to determine
+		   the ISA Compatible I/O Port.  If the ISA Compatible I/O Port is
+		   known and enabled, note that the particular Standard ISA I/O
+		   Address should not be probed.
+		 */
+		HostAdapter->IO_Address = IO_Address;
+		BusLogic_InterruptReset(HostAdapter);
+		if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
+		    == sizeof(PCIHostAdapterInformation)) {
+			if (PCIHostAdapterInformation.ISACompatibleIOPort < 6)
+				StandardAddressSeen[PCIHostAdapterInformation.ISACompatibleIOPort] = true;
+		} else
+			PCIHostAdapterInformation.ISACompatibleIOPort = BusLogic_IO_Disable;
+		/*
+		 * Issue the Modify I/O Address command to disable the ISA Compatible
+		 * I/O Port.  On PCI Host Adapters, the Modify I/O Address command
+		 * allows modification of the ISA compatible I/O Address that the Host
+		 * Adapter responds to; it does not affect the PCI compliant I/O Address
+		 * assigned at system initialization.
+		 */
+		ModifyIOAddressRequest = BusLogic_IO_Disable;
+		BusLogic_Command(HostAdapter, BusLogic_ModifyIOAddress, &ModifyIOAddressRequest, sizeof(ModifyIOAddressRequest), NULL, 0);
+		/*
+		   For the first MultiMaster Host Adapter enumerated, issue the Fetch
+		   Host Adapter Local RAM command to read byte 45 of the AutoSCSI area,
+		   for the setting of the "Use Bus And Device # For PCI Scanning Seq."
+		   option.  Issue the Inquire Board ID command since this option is
+		   only valid for the BT-948/958/958D.
+		 */
+		if (!ForceBusDeviceScanningOrderChecked) {
+			struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
+			struct BusLogic_AutoSCSIByte45 AutoSCSIByte45;
+			struct BusLogic_BoardID BoardID;
+			FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset + 45;
+			FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIByte45);
+			BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIByte45, sizeof(AutoSCSIByte45));
+			BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID));
+			if (BoardID.FirmwareVersion1stDigit == '5')
+				ForceBusDeviceScanningOrder = AutoSCSIByte45.ForceBusDeviceScanningOrder;
+			ForceBusDeviceScanningOrderChecked = true;
+		}
+		/*
+		   Determine whether this MultiMaster Host Adapter has its ISA
+		   Compatible I/O Port enabled and is assigned the Primary I/O Address.
+		   If it does, then it is the Primary MultiMaster Host Adapter and must
+		   be recognized first.  If it does not, then it is added to the list
+		   for probing after any Primary MultiMaster Host Adapter is probed.
+		 */
+		if (PCIHostAdapterInformation.ISACompatibleIOPort == BusLogic_IO_330) {
+			PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
+			PrimaryProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
+			PrimaryProbeInfo->IO_Address = IO_Address;
+			PrimaryProbeInfo->PCI_Address = PCI_Address;
+			PrimaryProbeInfo->Bus = Bus;
+			PrimaryProbeInfo->Device = Device;
+			PrimaryProbeInfo->IRQ_Channel = IRQ_Channel;
+			PrimaryProbeInfo->PCI_Device = PCI_Device;
+			PCIMultiMasterCount++;
+		} else if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
+			struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
+			ProbeInfo->HostAdapterType = BusLogic_MultiMaster;
+			ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
+			ProbeInfo->IO_Address = IO_Address;
+			ProbeInfo->PCI_Address = PCI_Address;
+			ProbeInfo->Bus = Bus;
+			ProbeInfo->Device = Device;
+			ProbeInfo->IRQ_Channel = IRQ_Channel;
+			ProbeInfo->PCI_Device = PCI_Device;
+			NonPrimaryPCIMultiMasterCount++;
+			PCIMultiMasterCount++;
+		} else
+			BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
+	}
+	/*
+	   If the AutoSCSI "Use Bus And Device # For PCI Scanning Seq." option is ON
+	   for the first enumerated MultiMaster Host Adapter, and if that host adapter
+	   is a BT-948/958/958D, then the MultiMaster BIOS will recognize MultiMaster
+	   Host Adapters in the order of increasing PCI Bus and Device Number.  In
+	   that case, sort the probe information into the same order the BIOS uses.
+	   If this option is OFF, then the MultiMaster BIOS will recognize MultiMaster
+	   Host Adapters in the order they are enumerated by the PCI BIOS, and hence
+	   no sorting is necessary.
+	 */
+	if (ForceBusDeviceScanningOrder)
+		BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[NonPrimaryPCIMultiMasterIndex], NonPrimaryPCIMultiMasterCount);
+	/*
+	   If no PCI MultiMaster Host Adapter is assigned the Primary I/O Address,
+	   then the Primary I/O Address must be probed explicitly before any PCI
+	   host adapters are probed.
+	 */
+	if (!BusLogic_ProbeOptions.NoProbeISA)
+		if (PrimaryProbeInfo->IO_Address == 0 && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe330 : check_region(0x330, BusLogic_MultiMasterAddressCount) == 0)) {
+			PrimaryProbeInfo->HostAdapterType = BusLogic_MultiMaster;
+			PrimaryProbeInfo->HostAdapterBusType = BusLogic_ISA_Bus;
+			PrimaryProbeInfo->IO_Address = 0x330;
+		}
+	/*
+	   Append the list of standard BusLogic MultiMaster ISA I/O Addresses,
+	   omitting the Primary I/O Address which has already been handled.
+	 */
+	if (!BusLogic_ProbeOptions.NoProbeISA) {
+		if (!StandardAddressSeen[1] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe334 : check_region(0x334, BusLogic_MultiMasterAddressCount) == 0))
+			BusLogic_AppendProbeAddressISA(0x334);
+		if (!StandardAddressSeen[2] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe230 : check_region(0x230, BusLogic_MultiMasterAddressCount) == 0))
+			BusLogic_AppendProbeAddressISA(0x230);
+		if (!StandardAddressSeen[3] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe234 : check_region(0x234, BusLogic_MultiMasterAddressCount) == 0))
+			BusLogic_AppendProbeAddressISA(0x234);
+		if (!StandardAddressSeen[4] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe130 : check_region(0x130, BusLogic_MultiMasterAddressCount) == 0))
+			BusLogic_AppendProbeAddressISA(0x130);
+		if (!StandardAddressSeen[5] && (BusLogic_ProbeOptions.LimitedProbeISA ? BusLogic_ProbeOptions.Probe134 : check_region(0x134, BusLogic_MultiMasterAddressCount) == 0))
+			BusLogic_AppendProbeAddressISA(0x134);
+	}
+	/*
+	   Iterate over the older non-compliant MultiMaster PCI Host Adapters,
+	   noting the PCI bus location and assigned IRQ Channel.
+	 */
+	PCI_Device = NULL;
+	while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC, PCI_Device)) != NULL) {
+		unsigned char Bus;
+		unsigned char Device;
+		unsigned int IRQ_Channel;
+		unsigned long IO_Address;
+
+		if (pci_enable_device(PCI_Device))
+			continue;
+
+		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+			continue;
+
+		Bus = PCI_Device->bus->number;
+		Device = PCI_Device->devfn >> 3;
+		IRQ_Channel = PCI_Device->irq;
+		IO_Address = pci_resource_start(PCI_Device, 0);
+
+		if (IO_Address == 0 || IRQ_Channel == 0)
+			continue;
+		for (i = 0; i < BusLogic_ProbeInfoCount; i++) {
+			struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[i];
+			if (ProbeInfo->IO_Address == IO_Address && ProbeInfo->HostAdapterType == BusLogic_MultiMaster) {
+				ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
+				ProbeInfo->PCI_Address = 0;
+				ProbeInfo->Bus = Bus;
+				ProbeInfo->Device = Device;
+				ProbeInfo->IRQ_Channel = IRQ_Channel;
+				ProbeInfo->PCI_Device = PCI_Device;
+				break;
+			}
+		}
+	}
+	return PCIMultiMasterCount;
+}
+
+
+/*
+  BusLogic_InitializeFlashPointProbeInfo initializes the list of I/O Address
+  and Bus Probe Information to be checked for potential BusLogic FlashPoint
+  Host Adapters by interrogating the PCI Configuration Space.  It returns the
+  number of FlashPoint Host Adapters found.
+*/
+
+static int __init BusLogic_InitializeFlashPointProbeInfo(struct BusLogic_HostAdapter
+							 *PrototypeHostAdapter)
+{
+	int FlashPointIndex = BusLogic_ProbeInfoCount, FlashPointCount = 0;
+	struct pci_dev *PCI_Device = NULL;
+	/*
+	   Interrogate PCI Configuration Space for any FlashPoint Host Adapters.
+	 */
+	while ((PCI_Device = pci_find_device(PCI_VENDOR_ID_BUSLOGIC, PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT, PCI_Device)) != NULL) {
+		unsigned char Bus;
+		unsigned char Device;
+		unsigned int IRQ_Channel;
+		unsigned long BaseAddress0;
+		unsigned long BaseAddress1;
+		unsigned long IO_Address;
+		unsigned long PCI_Address;
+
+		if (pci_enable_device(PCI_Device))
+			continue;
+
+		if (pci_set_dma_mask(PCI_Device, (u64) 0xffffffff))
+			continue;
+
+		Bus = PCI_Device->bus->number;
+		Device = PCI_Device->devfn >> 3;
+		IRQ_Channel = PCI_Device->irq;
+		IO_Address = BaseAddress0 = pci_resource_start(PCI_Device, 0);
+		PCI_Address = BaseAddress1 = pci_resource_start(PCI_Device, 1);
+#ifndef CONFIG_SCSI_OMIT_FLASHPOINT
+		if (pci_resource_flags(PCI_Device, 0) & IORESOURCE_MEM) {
+			BusLogic_Error("BusLogic: Base Address0 0x%X not I/O for " "FlashPoint Host Adapter\n", NULL, BaseAddress0);
+			BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
+			continue;
+		}
+		if (pci_resource_flags(PCI_Device, 1) & IORESOURCE_IO) {
+			BusLogic_Error("BusLogic: Base Address1 0x%X not Memory for " "FlashPoint Host Adapter\n", NULL, BaseAddress1);
+			BusLogic_Error("at PCI Bus %d Device %d PCI Address 0x%X\n", NULL, Bus, Device, PCI_Address);
+			continue;
+		}
+		if (IRQ_Channel == 0) {
+			BusLogic_Error("BusLogic: IRQ Channel %d invalid for " "FlashPoint Host Adapter\n", NULL, IRQ_Channel);
+			BusLogic_Error("at PCI Bus %d Device %d I/O Address 0x%X\n", NULL, Bus, Device, IO_Address);
+			continue;
+		}
+		if (BusLogic_GlobalOptions.TraceProbe) {
+			BusLogic_Notice("BusLogic: FlashPoint Host Adapter " "detected at\n", NULL);
+			BusLogic_Notice("BusLogic: PCI Bus %d Device %d I/O Address " "0x%X PCI Address 0x%X\n", NULL, Bus, Device, IO_Address, PCI_Address);
+		}
+		if (BusLogic_ProbeInfoCount < BusLogic_MaxHostAdapters) {
+			struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[BusLogic_ProbeInfoCount++];
+			ProbeInfo->HostAdapterType = BusLogic_FlashPoint;
+			ProbeInfo->HostAdapterBusType = BusLogic_PCI_Bus;
+			ProbeInfo->IO_Address = IO_Address;
+			ProbeInfo->PCI_Address = PCI_Address;
+			ProbeInfo->Bus = Bus;
+			ProbeInfo->Device = Device;
+			ProbeInfo->IRQ_Channel = IRQ_Channel;
+			ProbeInfo->PCI_Device = PCI_Device;
+			FlashPointCount++;
+		} else
+			BusLogic_Warning("BusLogic: Too many Host Adapters " "detected\n", NULL);
+#else
+		BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", NULL, Bus, Device);
+		BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, irq %d, " "but FlashPoint\n", NULL, IO_Address, PCI_Address, IRQ_Channel);
+		BusLogic_Error("BusLogic: support was omitted in this kernel " "configuration.\n", NULL);
+#endif
+	}
+	/*
+	   The FlashPoint BIOS will scan for FlashPoint Host Adapters in the order of
+	   increasing PCI Bus and Device Number, so sort the probe information into
+	   the same order the BIOS uses.
+	 */
+	BusLogic_SortProbeInfo(&BusLogic_ProbeInfoList[FlashPointIndex], FlashPointCount);
+	return FlashPointCount;
+}
+
+
+/*
+  BusLogic_InitializeProbeInfoList initializes the list of I/O Address and Bus
+  Probe Information to be checked for potential BusLogic SCSI Host Adapters by
+  interrogating the PCI Configuration Space on PCI machines as well as from the
+  list of standard BusLogic MultiMaster ISA I/O Addresses.  By default, if both
+  FlashPoint and PCI MultiMaster Host Adapters are present, this driver will
+  probe for FlashPoint Host Adapters first unless the BIOS primary disk is
+  controlled by the first PCI MultiMaster Host Adapter, in which case
+  MultiMaster Host Adapters will be probed first.  The BusLogic Driver Options
+  specifications "MultiMasterFirst" and "FlashPointFirst" can be used to force
+  a particular probe order.
+*/
+
+static void __init BusLogic_InitializeProbeInfoList(struct BusLogic_HostAdapter
+						    *PrototypeHostAdapter)
+{
+	/*
+	   If a PCI BIOS is present, interrogate it for MultiMaster and FlashPoint
+	   Host Adapters; otherwise, default to the standard ISA MultiMaster probe.
+	 */
+	if (!BusLogic_ProbeOptions.NoProbePCI) {
+		if (BusLogic_ProbeOptions.MultiMasterFirst) {
+			BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
+			BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
+		} else if (BusLogic_ProbeOptions.FlashPointFirst) {
+			BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
+			BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
+		} else {
+			int FlashPointCount = BusLogic_InitializeFlashPointProbeInfo(PrototypeHostAdapter);
+			int PCIMultiMasterCount = BusLogic_InitializeMultiMasterProbeInfo(PrototypeHostAdapter);
+			if (FlashPointCount > 0 && PCIMultiMasterCount > 0) {
+				struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[FlashPointCount];
+				struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
+				struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
+				struct BusLogic_BIOSDriveMapByte Drive0MapByte;
+				while (ProbeInfo->HostAdapterBusType != BusLogic_PCI_Bus)
+					ProbeInfo++;
+				HostAdapter->IO_Address = ProbeInfo->IO_Address;
+				FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_BIOS_BaseOffset + BusLogic_BIOS_DriveMapOffset + 0;
+				FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(Drive0MapByte);
+				BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &Drive0MapByte, sizeof(Drive0MapByte));
+				/*
+				   If the Map Byte for BIOS Drive 0 indicates that BIOS Drive 0
+				   is controlled by this PCI MultiMaster Host Adapter, then
+				   reverse the probe order so that MultiMaster Host Adapters are
+				   probed before FlashPoint Host Adapters.
+				 */
+				if (Drive0MapByte.DiskGeometry != BusLogic_BIOS_Disk_Not_Installed) {
+					struct BusLogic_ProbeInfo SavedProbeInfo[BusLogic_MaxHostAdapters];
+					int MultiMasterCount = BusLogic_ProbeInfoCount - FlashPointCount;
+					memcpy(SavedProbeInfo, BusLogic_ProbeInfoList, BusLogic_ProbeInfoCount * sizeof(struct BusLogic_ProbeInfo));
+					memcpy(&BusLogic_ProbeInfoList[0], &SavedProbeInfo[FlashPointCount], MultiMasterCount * sizeof(struct BusLogic_ProbeInfo));
+					memcpy(&BusLogic_ProbeInfoList[MultiMasterCount], &SavedProbeInfo[0], FlashPointCount * sizeof(struct BusLogic_ProbeInfo));
+				}
+			}
+		}
+	} else
+		BusLogic_InitializeProbeInfoListISA(PrototypeHostAdapter);
+}
+
+
+#endif				/* CONFIG_PCI */
+
+
+/*
+  BusLogic_Failure prints a standardized error message, and then returns false.
+*/
+
+static boolean BusLogic_Failure(struct BusLogic_HostAdapter *HostAdapter, char *ErrorMessage)
+{
+	BusLogic_AnnounceDriver(HostAdapter);
+	if (HostAdapter->HostAdapterBusType == BusLogic_PCI_Bus) {
+		BusLogic_Error("While configuring BusLogic PCI Host Adapter at\n", HostAdapter);
+		BusLogic_Error("Bus %d Device %d I/O Address 0x%X PCI Address 0x%X:\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device, HostAdapter->IO_Address, HostAdapter->PCI_Address);
+	} else
+		BusLogic_Error("While configuring BusLogic Host Adapter at " "I/O Address 0x%X:\n", HostAdapter, HostAdapter->IO_Address);
+	BusLogic_Error("%s FAILED - DETACHING\n", HostAdapter, ErrorMessage);
+	if (BusLogic_CommandFailureReason != NULL)
+		BusLogic_Error("ADDITIONAL FAILURE INFO - %s\n", HostAdapter, BusLogic_CommandFailureReason);
+	return false;
+}
+
+
+/*
+  BusLogic_ProbeHostAdapter probes for a BusLogic Host Adapter.
+*/
+
+static boolean __init BusLogic_ProbeHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
+{
+	union BusLogic_StatusRegister StatusRegister;
+	union BusLogic_InterruptRegister InterruptRegister;
+	union BusLogic_GeometryRegister GeometryRegister;
+	/*
+	   FlashPoint Host Adapters are Probed by the FlashPoint SCCB Manager.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
+		struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
+		FlashPointInfo->BaseAddress = (u32) HostAdapter->IO_Address;
+		FlashPointInfo->IRQ_Channel = HostAdapter->IRQ_Channel;
+		FlashPointInfo->Present = false;
+		if (!(FlashPoint_ProbeHostAdapter(FlashPointInfo) == 0 && FlashPointInfo->Present)) {
+			BusLogic_Error("BusLogic: FlashPoint Host Adapter detected at " "PCI Bus %d Device %d\n", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
+			BusLogic_Error("BusLogic: I/O Address 0x%X PCI Address 0x%X, " "but FlashPoint\n", HostAdapter, HostAdapter->IO_Address, HostAdapter->PCI_Address);
+			BusLogic_Error("BusLogic: Probe Function failed to validate it.\n", HostAdapter);
+			return false;
+		}
+		if (BusLogic_GlobalOptions.TraceProbe)
+			BusLogic_Notice("BusLogic_Probe(0x%X): FlashPoint Found\n", HostAdapter, HostAdapter->IO_Address);
+		/*
+		   Indicate the Host Adapter Probe completed successfully.
+		 */
+		return true;
+	}
+	/*
+	   Read the Status, Interrupt, and Geometry Registers to test if there are I/O
+	   ports that respond, and to check the values to determine if they are from a
+	   BusLogic Host Adapter.  A nonexistent I/O port will return 0xFF, in which
+	   case there is definitely no BusLogic Host Adapter at this base I/O Address.
+	   The test here is a subset of that used by the BusLogic Host Adapter BIOS.
+	 */
+	StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+	InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
+	GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
+	if (BusLogic_GlobalOptions.TraceProbe)
+		BusLogic_Notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt 0x%02X, " "Geometry 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All, InterruptRegister.All, GeometryRegister.All);
+	if (StatusRegister.All == 0 || StatusRegister.sr.DiagnosticActive || StatusRegister.sr.CommandParameterRegisterBusy || StatusRegister.sr.Reserved || StatusRegister.sr.CommandInvalid || InterruptRegister.ir.Reserved != 0)
+		return false;
+	/*
+	   Check the undocumented Geometry Register to test if there is an I/O port
+	   that responded.  Adaptec Host Adapters do not implement the Geometry
+	   Register, so this test helps serve to avoid incorrectly recognizing an
+	   Adaptec 1542A or 1542B as a BusLogic.  Unfortunately, the Adaptec 1542C
+	   series does respond to the Geometry Register I/O port, but it will be
+	   rejected later when the Inquire Extended Setup Information command is
+	   issued in BusLogic_CheckHostAdapter.  The AMI FastDisk Host Adapter is a
+	   BusLogic clone that implements the same interface as earlier BusLogic
+	   Host Adapters, including the undocumented commands, and is therefore
+	   supported by this driver.  However, the AMI FastDisk always returns 0x00
+	   upon reading the Geometry Register, so the extended translation option
+	   should always be left disabled on the AMI FastDisk.
+	 */
+	if (GeometryRegister.All == 0xFF)
+		return false;
+	/*
+	   Indicate the Host Adapter Probe completed successfully.
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_HardwareResetHostAdapter issues a Hardware Reset to the Host Adapter
+  and waits for Host Adapter Diagnostics to complete.  If HardReset is true, a
+  Hard Reset is performed which also initiates a SCSI Bus Reset.  Otherwise, a
+  Soft Reset is performed which only resets the Host Adapter without forcing a
+  SCSI Bus Reset.
+*/
+
+static boolean BusLogic_HardwareResetHostAdapter(struct BusLogic_HostAdapter
+						 *HostAdapter, boolean HardReset)
+{
+	union BusLogic_StatusRegister StatusRegister;
+	int TimeoutCounter;
+	/*
+	   FlashPoint Host Adapters are Hard Reset by the FlashPoint SCCB Manager.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
+		struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
+		FlashPointInfo->HostSoftReset = !HardReset;
+		FlashPointInfo->ReportDataUnderrun = true;
+		HostAdapter->CardHandle = FlashPoint_HardwareResetHostAdapter(FlashPointInfo);
+		if (HostAdapter->CardHandle == FlashPoint_BadCardHandle)
+			return false;
+		/*
+		   Indicate the Host Adapter Hard Reset completed successfully.
+		 */
+		return true;
+	}
+	/*
+	   Issue a Hard Reset or Soft Reset Command to the Host Adapter.  The Host
+	   Adapter should respond by setting Diagnostic Active in the Status Register.
+	 */
+	if (HardReset)
+		BusLogic_HardReset(HostAdapter);
+	else
+		BusLogic_SoftReset(HostAdapter);
+	/*
+	   Wait until Diagnostic Active is set in the Status Register.
+	 */
+	TimeoutCounter = 5 * 10000;
+	while (--TimeoutCounter >= 0) {
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (StatusRegister.sr.DiagnosticActive)
+			break;
+		udelay(100);
+	}
+	if (BusLogic_GlobalOptions.TraceHardwareReset)
+		BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Active, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
+	if (TimeoutCounter < 0)
+		return false;
+	/*
+	   Wait 100 microseconds to allow completion of any initial diagnostic
+	   activity which might leave the contents of the Status Register
+	   unpredictable.
+	 */
+	udelay(100);
+	/*
+	   Wait until Diagnostic Active is reset in the Status Register.
+	 */
+	TimeoutCounter = 10 * 10000;
+	while (--TimeoutCounter >= 0) {
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (!StatusRegister.sr.DiagnosticActive)
+			break;
+		udelay(100);
+	}
+	if (BusLogic_GlobalOptions.TraceHardwareReset)
+		BusLogic_Notice("BusLogic_HardwareReset(0x%X): Diagnostic Completed, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
+	if (TimeoutCounter < 0)
+		return false;
+	/*
+	   Wait until at least one of the Diagnostic Failure, Host Adapter Ready,
+	   or Data In Register Ready bits is set in the Status Register.
+	 */
+	TimeoutCounter = 10000;
+	while (--TimeoutCounter >= 0) {
+		StatusRegister.All = BusLogic_ReadStatusRegister(HostAdapter);
+		if (StatusRegister.sr.DiagnosticFailure || StatusRegister.sr.HostAdapterReady || StatusRegister.sr.DataInRegisterReady)
+			break;
+		udelay(100);
+	}
+	if (BusLogic_GlobalOptions.TraceHardwareReset)
+		BusLogic_Notice("BusLogic_HardwareReset(0x%X): Host Adapter Ready, " "Status 0x%02X\n", HostAdapter, HostAdapter->IO_Address, StatusRegister.All);
+	if (TimeoutCounter < 0)
+		return false;
+	/*
+	   If Diagnostic Failure is set or Host Adapter Ready is reset, then an
+	   error occurred during the Host Adapter diagnostics.  If Data In Register
+	   Ready is set, then there is an Error Code available.
+	 */
+	if (StatusRegister.sr.DiagnosticFailure || !StatusRegister.sr.HostAdapterReady) {
+		BusLogic_CommandFailureReason = NULL;
+		BusLogic_Failure(HostAdapter, "HARD RESET DIAGNOSTICS");
+		BusLogic_Error("HOST ADAPTER STATUS REGISTER = %02X\n", HostAdapter, StatusRegister.All);
+		if (StatusRegister.sr.DataInRegisterReady) {
+			unsigned char ErrorCode = BusLogic_ReadDataInRegister(HostAdapter);
+			BusLogic_Error("HOST ADAPTER ERROR CODE = %d\n", HostAdapter, ErrorCode);
+		}
+		return false;
+	}
+	/*
+	   Indicate the Host Adapter Hard Reset completed successfully.
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_CheckHostAdapter checks to be sure this really is a BusLogic
+  Host Adapter.
+*/
+
+static boolean __init BusLogic_CheckHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
+{
+	struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
+	unsigned char RequestedReplyLength;
+	boolean Result = true;
+	/*
+	   FlashPoint Host Adapters do not require this protection.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter))
+		return true;
+	/*
+	   Issue the Inquire Extended Setup Information command.  Only genuine
+	   BusLogic Host Adapters and true clones support this command.  Adaptec 1542C
+	   series Host Adapters that respond to the Geometry Register I/O port will
+	   fail this command.
+	 */
+	RequestedReplyLength = sizeof(ExtendedSetupInformation);
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
+	    != sizeof(ExtendedSetupInformation))
+		Result = false;
+	/*
+	   Provide tracing information if requested and return.
+	 */
+	if (BusLogic_GlobalOptions.TraceProbe)
+		BusLogic_Notice("BusLogic_Check(0x%X): MultiMaster %s\n", HostAdapter, HostAdapter->IO_Address, (Result ? "Found" : "Not Found"));
+	return Result;
+}
+
+
+/*
+  BusLogic_ReadHostAdapterConfiguration reads the Configuration Information
+  from Host Adapter and initializes the Host Adapter structure.
+*/
+
+static boolean __init BusLogic_ReadHostAdapterConfiguration(struct BusLogic_HostAdapter
+							    *HostAdapter)
+{
+	struct BusLogic_BoardID BoardID;
+	struct BusLogic_Configuration Configuration;
+	struct BusLogic_SetupInformation SetupInformation;
+	struct BusLogic_ExtendedSetupInformation ExtendedSetupInformation;
+	unsigned char HostAdapterModelNumber[5];
+	unsigned char FirmwareVersion3rdDigit;
+	unsigned char FirmwareVersionLetter;
+	struct BusLogic_PCIHostAdapterInformation PCIHostAdapterInformation;
+	struct BusLogic_FetchHostAdapterLocalRAMRequest FetchHostAdapterLocalRAMRequest;
+	struct BusLogic_AutoSCSIData AutoSCSIData;
+	union BusLogic_GeometryRegister GeometryRegister;
+	unsigned char RequestedReplyLength;
+	unsigned char *TargetPointer, Character;
+	int TargetID, i;
+	/*
+	   Configuration Information for FlashPoint Host Adapters is provided in the
+	   FlashPoint_Info structure by the FlashPoint SCCB Manager's Probe Function.
+	   Initialize fields in the Host Adapter structure from the FlashPoint_Info
+	   structure.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter)) {
+		struct FlashPoint_Info *FlashPointInfo = &HostAdapter->FlashPointInfo;
+		TargetPointer = HostAdapter->ModelName;
+		*TargetPointer++ = 'B';
+		*TargetPointer++ = 'T';
+		*TargetPointer++ = '-';
+		for (i = 0; i < sizeof(FlashPointInfo->ModelNumber); i++)
+			*TargetPointer++ = FlashPointInfo->ModelNumber[i];
+		*TargetPointer++ = '\0';
+		strcpy(HostAdapter->FirmwareVersion, FlashPoint_FirmwareVersion);
+		HostAdapter->SCSI_ID = FlashPointInfo->SCSI_ID;
+		HostAdapter->ExtendedTranslationEnabled = FlashPointInfo->ExtendedTranslationEnabled;
+		HostAdapter->ParityCheckingEnabled = FlashPointInfo->ParityCheckingEnabled;
+		HostAdapter->BusResetEnabled = !FlashPointInfo->HostSoftReset;
+		HostAdapter->LevelSensitiveInterrupt = true;
+		HostAdapter->HostWideSCSI = FlashPointInfo->HostWideSCSI;
+		HostAdapter->HostDifferentialSCSI = false;
+		HostAdapter->HostSupportsSCAM = true;
+		HostAdapter->HostUltraSCSI = true;
+		HostAdapter->ExtendedLUNSupport = true;
+		HostAdapter->TerminationInfoValid = true;
+		HostAdapter->LowByteTerminated = FlashPointInfo->LowByteTerminated;
+		HostAdapter->HighByteTerminated = FlashPointInfo->HighByteTerminated;
+		HostAdapter->SCAM_Enabled = FlashPointInfo->SCAM_Enabled;
+		HostAdapter->SCAM_Level2 = FlashPointInfo->SCAM_Level2;
+		HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
+		HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
+		HostAdapter->MaxLogicalUnits = 32;
+		HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
+		HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
+		HostAdapter->DriverQueueDepth = 255;
+		HostAdapter->HostAdapterQueueDepth = HostAdapter->DriverQueueDepth;
+		HostAdapter->SynchronousPermitted = FlashPointInfo->SynchronousPermitted;
+		HostAdapter->FastPermitted = FlashPointInfo->FastPermitted;
+		HostAdapter->UltraPermitted = FlashPointInfo->UltraPermitted;
+		HostAdapter->WidePermitted = FlashPointInfo->WidePermitted;
+		HostAdapter->DisconnectPermitted = FlashPointInfo->DisconnectPermitted;
+		HostAdapter->TaggedQueuingPermitted = 0xFFFF;
+		goto Common;
+	}
+	/*
+	   Issue the Inquire Board ID command.
+	 */
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireBoardID, NULL, 0, &BoardID, sizeof(BoardID)) != sizeof(BoardID))
+		return BusLogic_Failure(HostAdapter, "INQUIRE BOARD ID");
+	/*
+	   Issue the Inquire Configuration command.
+	 */
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireConfiguration, NULL, 0, &Configuration, sizeof(Configuration))
+	    != sizeof(Configuration))
+		return BusLogic_Failure(HostAdapter, "INQUIRE CONFIGURATION");
+	/*
+	   Issue the Inquire Setup Information command.
+	 */
+	RequestedReplyLength = sizeof(SetupInformation);
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
+	    != sizeof(SetupInformation))
+		return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
+	/*
+	   Issue the Inquire Extended Setup Information command.
+	 */
+	RequestedReplyLength = sizeof(ExtendedSetupInformation);
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireExtendedSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &ExtendedSetupInformation, sizeof(ExtendedSetupInformation))
+	    != sizeof(ExtendedSetupInformation))
+		return BusLogic_Failure(HostAdapter, "INQUIRE EXTENDED SETUP INFORMATION");
+	/*
+	   Issue the Inquire Firmware Version 3rd Digit command.
+	 */
+	FirmwareVersion3rdDigit = '\0';
+	if (BoardID.FirmwareVersion1stDigit > '0')
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersion3rdDigit, NULL, 0, &FirmwareVersion3rdDigit, sizeof(FirmwareVersion3rdDigit))
+		    != sizeof(FirmwareVersion3rdDigit))
+			return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE 3RD DIGIT");
+	/*
+	   Issue the Inquire Host Adapter Model Number command.
+	 */
+	if (ExtendedSetupInformation.BusType == 'A' && BoardID.FirmwareVersion1stDigit == '2')
+		/* BusLogic BT-542B ISA 2.xx */
+		strcpy(HostAdapterModelNumber, "542B");
+	else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '2' && (BoardID.FirmwareVersion2ndDigit <= '1' || (BoardID.FirmwareVersion2ndDigit == '2' && FirmwareVersion3rdDigit == '0')))
+		/* BusLogic BT-742A EISA 2.1x or 2.20 */
+		strcpy(HostAdapterModelNumber, "742A");
+	else if (ExtendedSetupInformation.BusType == 'E' && BoardID.FirmwareVersion1stDigit == '0')
+		/* AMI FastDisk EISA Series 441 0.x */
+		strcpy(HostAdapterModelNumber, "747A");
+	else {
+		RequestedReplyLength = sizeof(HostAdapterModelNumber);
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireHostAdapterModelNumber, &RequestedReplyLength, sizeof(RequestedReplyLength), &HostAdapterModelNumber, sizeof(HostAdapterModelNumber))
+		    != sizeof(HostAdapterModelNumber))
+			return BusLogic_Failure(HostAdapter, "INQUIRE HOST ADAPTER MODEL NUMBER");
+	}
+	/*
+	   BusLogic MultiMaster Host Adapters can be identified by their model number
+	   and the major version number of their firmware as follows:
+
+	   5.xx       BusLogic "W" Series Host Adapters:
+	   BT-948/958/958D
+	   4.xx       BusLogic "C" Series Host Adapters:
+	   BT-946C/956C/956CD/747C/757C/757CD/445C/545C/540CF
+	   3.xx       BusLogic "S" Series Host Adapters:
+	   BT-747S/747D/757S/757D/445S/545S/542D
+	   BT-542B/742A (revision H)
+	   2.xx       BusLogic "A" Series Host Adapters:
+	   BT-542B/742A (revision G and below)
+	   0.xx       AMI FastDisk VLB/EISA BusLogic Clone Host Adapter
+	 */
+	/*
+	   Save the Model Name and Host Adapter Name in the Host Adapter structure.
+	 */
+	TargetPointer = HostAdapter->ModelName;
+	*TargetPointer++ = 'B';
+	*TargetPointer++ = 'T';
+	*TargetPointer++ = '-';
+	for (i = 0; i < sizeof(HostAdapterModelNumber); i++) {
+		Character = HostAdapterModelNumber[i];
+		if (Character == ' ' || Character == '\0')
+			break;
+		*TargetPointer++ = Character;
+	}
+	*TargetPointer++ = '\0';
+	/*
+	   Save the Firmware Version in the Host Adapter structure.
+	 */
+	TargetPointer = HostAdapter->FirmwareVersion;
+	*TargetPointer++ = BoardID.FirmwareVersion1stDigit;
+	*TargetPointer++ = '.';
+	*TargetPointer++ = BoardID.FirmwareVersion2ndDigit;
+	if (FirmwareVersion3rdDigit != ' ' && FirmwareVersion3rdDigit != '\0')
+		*TargetPointer++ = FirmwareVersion3rdDigit;
+	*TargetPointer = '\0';
+	/*
+	   Issue the Inquire Firmware Version Letter command.
+	 */
+	if (strcmp(HostAdapter->FirmwareVersion, "3.3") >= 0) {
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireFirmwareVersionLetter, NULL, 0, &FirmwareVersionLetter, sizeof(FirmwareVersionLetter))
+		    != sizeof(FirmwareVersionLetter))
+			return BusLogic_Failure(HostAdapter, "INQUIRE FIRMWARE VERSION LETTER");
+		if (FirmwareVersionLetter != ' ' && FirmwareVersionLetter != '\0')
+			*TargetPointer++ = FirmwareVersionLetter;
+		*TargetPointer = '\0';
+	}
+	/*
+	   Save the Host Adapter SCSI ID in the Host Adapter structure.
+	 */
+	HostAdapter->SCSI_ID = Configuration.HostAdapterID;
+	/*
+	   Determine the Bus Type and save it in the Host Adapter structure, determine
+	   and save the IRQ Channel if necessary, and determine and save the DMA
+	   Channel for ISA Host Adapters.
+	 */
+	HostAdapter->HostAdapterBusType = BusLogic_HostAdapterBusTypes[HostAdapter->ModelName[3] - '4'];
+	if (HostAdapter->IRQ_Channel == 0) {
+		if (Configuration.IRQ_Channel9)
+			HostAdapter->IRQ_Channel = 9;
+		else if (Configuration.IRQ_Channel10)
+			HostAdapter->IRQ_Channel = 10;
+		else if (Configuration.IRQ_Channel11)
+			HostAdapter->IRQ_Channel = 11;
+		else if (Configuration.IRQ_Channel12)
+			HostAdapter->IRQ_Channel = 12;
+		else if (Configuration.IRQ_Channel14)
+			HostAdapter->IRQ_Channel = 14;
+		else if (Configuration.IRQ_Channel15)
+			HostAdapter->IRQ_Channel = 15;
+	}
+	if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus) {
+		if (Configuration.DMA_Channel5)
+			HostAdapter->DMA_Channel = 5;
+		else if (Configuration.DMA_Channel6)
+			HostAdapter->DMA_Channel = 6;
+		else if (Configuration.DMA_Channel7)
+			HostAdapter->DMA_Channel = 7;
+	}
+	/*
+	   Determine whether Extended Translation is enabled and save it in
+	   the Host Adapter structure.
+	 */
+	GeometryRegister.All = BusLogic_ReadGeometryRegister(HostAdapter);
+	HostAdapter->ExtendedTranslationEnabled = GeometryRegister.gr.ExtendedTranslationEnabled;
+	/*
+	   Save the Scatter Gather Limits, Level Sensitive Interrupt flag, Wide
+	   SCSI flag, Differential SCSI flag, SCAM Supported flag, and
+	   Ultra SCSI flag in the Host Adapter structure.
+	 */
+	HostAdapter->HostAdapterScatterGatherLimit = ExtendedSetupInformation.ScatterGatherLimit;
+	HostAdapter->DriverScatterGatherLimit = HostAdapter->HostAdapterScatterGatherLimit;
+	if (HostAdapter->HostAdapterScatterGatherLimit > BusLogic_ScatterGatherLimit)
+		HostAdapter->DriverScatterGatherLimit = BusLogic_ScatterGatherLimit;
+	if (ExtendedSetupInformation.Misc.LevelSensitiveInterrupt)
+		HostAdapter->LevelSensitiveInterrupt = true;
+	HostAdapter->HostWideSCSI = ExtendedSetupInformation.HostWideSCSI;
+	HostAdapter->HostDifferentialSCSI = ExtendedSetupInformation.HostDifferentialSCSI;
+	HostAdapter->HostSupportsSCAM = ExtendedSetupInformation.HostSupportsSCAM;
+	HostAdapter->HostUltraSCSI = ExtendedSetupInformation.HostUltraSCSI;
+	/*
+	   Determine whether Extended LUN Format CCBs are supported and save the
+	   information in the Host Adapter structure.
+	 */
+	if (HostAdapter->FirmwareVersion[0] == '5' || (HostAdapter->FirmwareVersion[0] == '4' && HostAdapter->HostWideSCSI))
+		HostAdapter->ExtendedLUNSupport = true;
+	/*
+	   Issue the Inquire PCI Host Adapter Information command to read the
+	   Termination Information from "W" series MultiMaster Host Adapters.
+	 */
+	if (HostAdapter->FirmwareVersion[0] == '5') {
+		if (BusLogic_Command(HostAdapter, BusLogic_InquirePCIHostAdapterInformation, NULL, 0, &PCIHostAdapterInformation, sizeof(PCIHostAdapterInformation))
+		    != sizeof(PCIHostAdapterInformation))
+			return BusLogic_Failure(HostAdapter, "INQUIRE PCI HOST ADAPTER INFORMATION");
+		/*
+		   Save the Termination Information in the Host Adapter structure.
+		 */
+		if (PCIHostAdapterInformation.GenericInfoValid) {
+			HostAdapter->TerminationInfoValid = true;
+			HostAdapter->LowByteTerminated = PCIHostAdapterInformation.LowByteTerminated;
+			HostAdapter->HighByteTerminated = PCIHostAdapterInformation.HighByteTerminated;
+		}
+	}
+	/*
+	   Issue the Fetch Host Adapter Local RAM command to read the AutoSCSI data
+	   from "W" and "C" series MultiMaster Host Adapters.
+	 */
+	if (HostAdapter->FirmwareVersion[0] >= '4') {
+		FetchHostAdapterLocalRAMRequest.ByteOffset = BusLogic_AutoSCSI_BaseOffset;
+		FetchHostAdapterLocalRAMRequest.ByteCount = sizeof(AutoSCSIData);
+		if (BusLogic_Command(HostAdapter, BusLogic_FetchHostAdapterLocalRAM, &FetchHostAdapterLocalRAMRequest, sizeof(FetchHostAdapterLocalRAMRequest), &AutoSCSIData, sizeof(AutoSCSIData))
+		    != sizeof(AutoSCSIData))
+			return BusLogic_Failure(HostAdapter, "FETCH HOST ADAPTER LOCAL RAM");
+		/*
+		   Save the Parity Checking Enabled, Bus Reset Enabled, and Termination
+		   Information in the Host Adapter structure.
+		 */
+		HostAdapter->ParityCheckingEnabled = AutoSCSIData.ParityCheckingEnabled;
+		HostAdapter->BusResetEnabled = AutoSCSIData.BusResetEnabled;
+		if (HostAdapter->FirmwareVersion[0] == '4') {
+			HostAdapter->TerminationInfoValid = true;
+			HostAdapter->LowByteTerminated = AutoSCSIData.LowByteTerminated;
+			HostAdapter->HighByteTerminated = AutoSCSIData.HighByteTerminated;
+		}
+		/*
+		   Save the Wide Permitted, Fast Permitted, Synchronous Permitted,
+		   Disconnect Permitted, Ultra Permitted, and SCAM Information in the
+		   Host Adapter structure.
+		 */
+		HostAdapter->WidePermitted = AutoSCSIData.WidePermitted;
+		HostAdapter->FastPermitted = AutoSCSIData.FastPermitted;
+		HostAdapter->SynchronousPermitted = AutoSCSIData.SynchronousPermitted;
+		HostAdapter->DisconnectPermitted = AutoSCSIData.DisconnectPermitted;
+		if (HostAdapter->HostUltraSCSI)
+			HostAdapter->UltraPermitted = AutoSCSIData.UltraPermitted;
+		if (HostAdapter->HostSupportsSCAM) {
+			HostAdapter->SCAM_Enabled = AutoSCSIData.SCAM_Enabled;
+			HostAdapter->SCAM_Level2 = AutoSCSIData.SCAM_Level2;
+		}
+	}
+	/*
+	   Initialize fields in the Host Adapter structure for "S" and "A" series
+	   MultiMaster Host Adapters.
+	 */
+	if (HostAdapter->FirmwareVersion[0] < '4') {
+		if (SetupInformation.SynchronousInitiationEnabled) {
+			HostAdapter->SynchronousPermitted = 0xFF;
+			if (HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus) {
+				if (ExtendedSetupInformation.Misc.FastOnEISA)
+					HostAdapter->FastPermitted = 0xFF;
+				if (strcmp(HostAdapter->ModelName, "BT-757") == 0)
+					HostAdapter->WidePermitted = 0xFF;
+			}
+		}
+		HostAdapter->DisconnectPermitted = 0xFF;
+		HostAdapter->ParityCheckingEnabled = SetupInformation.ParityCheckingEnabled;
+		HostAdapter->BusResetEnabled = true;
+	}
+	/*
+	   Determine the maximum number of Target IDs and Logical Units supported by
+	   this driver for Wide and Narrow Host Adapters.
+	 */
+	HostAdapter->MaxTargetDevices = (HostAdapter->HostWideSCSI ? 16 : 8);
+	HostAdapter->MaxLogicalUnits = (HostAdapter->ExtendedLUNSupport ? 32 : 8);
+	/*
+	   Select appropriate values for the Mailbox Count, Driver Queue Depth,
+	   Initial CCBs, and Incremental CCBs variables based on whether or not Strict
+	   Round Robin Mode is supported.  If Strict Round Robin Mode is supported,
+	   then there is no performance degradation in using the maximum possible
+	   number of Outgoing and Incoming Mailboxes and allowing the Tagged and
+	   Untagged Queue Depths to determine the actual utilization.  If Strict Round
+	   Robin Mode is not supported, then the Host Adapter must scan all the
+	   Outgoing Mailboxes whenever an Outgoing Mailbox entry is made, which can
+	   cause a substantial performance penalty.  The host adapters actually have
+	   room to store the following number of CCBs internally; that is, they can
+	   internally queue and manage this many active commands on the SCSI bus
+	   simultaneously.  Performance measurements demonstrate that the Driver Queue
+	   Depth should be set to the Mailbox Count, rather than the Host Adapter
+	   Queue Depth (internal CCB capacity), as it is more efficient to have the
+	   queued commands waiting in Outgoing Mailboxes if necessary than to block
+	   the process in the higher levels of the SCSI Subsystem.
+
+	   192          BT-948/958/958D
+	   100          BT-946C/956C/956CD/747C/757C/757CD/445C
+	   50   BT-545C/540CF
+	   30   BT-747S/747D/757S/757D/445S/545S/542D/542B/742A
+	 */
+	if (HostAdapter->FirmwareVersion[0] == '5')
+		HostAdapter->HostAdapterQueueDepth = 192;
+	else if (HostAdapter->FirmwareVersion[0] == '4')
+		HostAdapter->HostAdapterQueueDepth = (HostAdapter->HostAdapterBusType != BusLogic_ISA_Bus ? 100 : 50);
+	else
+		HostAdapter->HostAdapterQueueDepth = 30;
+	if (strcmp(HostAdapter->FirmwareVersion, "3.31") >= 0) {
+		HostAdapter->StrictRoundRobinModeSupport = true;
+		HostAdapter->MailboxCount = BusLogic_MaxMailboxes;
+	} else {
+		HostAdapter->StrictRoundRobinModeSupport = false;
+		HostAdapter->MailboxCount = 32;
+	}
+	HostAdapter->DriverQueueDepth = HostAdapter->MailboxCount;
+	HostAdapter->InitialCCBs = 4 * BusLogic_CCB_AllocationGroupSize;
+	HostAdapter->IncrementalCCBs = BusLogic_CCB_AllocationGroupSize;
+	/*
+	   Tagged Queuing support is available and operates properly on all "W" series
+	   MultiMaster Host Adapters, on "C" series MultiMaster Host Adapters with
+	   firmware version 4.22 and above, and on "S" series MultiMaster Host
+	   Adapters with firmware version 3.35 and above.
+	 */
+	HostAdapter->TaggedQueuingPermitted = 0;
+	switch (HostAdapter->FirmwareVersion[0]) {
+	case '5':
+		HostAdapter->TaggedQueuingPermitted = 0xFFFF;
+		break;
+	case '4':
+		if (strcmp(HostAdapter->FirmwareVersion, "4.22") >= 0)
+			HostAdapter->TaggedQueuingPermitted = 0xFFFF;
+		break;
+	case '3':
+		if (strcmp(HostAdapter->FirmwareVersion, "3.35") >= 0)
+			HostAdapter->TaggedQueuingPermitted = 0xFFFF;
+		break;
+	}
+	/*
+	   Determine the Host Adapter BIOS Address if the BIOS is enabled and
+	   save it in the Host Adapter structure.  The BIOS is disabled if the
+	   BIOS_Address is 0.
+	 */
+	HostAdapter->BIOS_Address = ExtendedSetupInformation.BIOS_Address << 12;
+	/*
+	   ISA Host Adapters require Bounce Buffers if there is more than 16MB memory.
+	 */
+	if (HostAdapter->HostAdapterBusType == BusLogic_ISA_Bus && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
+		HostAdapter->BounceBuffersRequired = true;
+	/*
+	   BusLogic BT-445S Host Adapters prior to board revision E have a hardware
+	   bug whereby when the BIOS is enabled, transfers to/from the same address
+	   range the BIOS occupies modulo 16MB are handled incorrectly.  Only properly
+	   functioning BT-445S Host Adapters have firmware version 3.37, so require
+	   that ISA Bounce Buffers be used for the buggy BT-445S models if there is
+	   more than 16MB memory.
+	 */
+	if (HostAdapter->BIOS_Address > 0 && strcmp(HostAdapter->ModelName, "BT-445S") == 0 && strcmp(HostAdapter->FirmwareVersion, "3.37") < 0 && (void *) high_memory > (void *) MAX_DMA_ADDRESS)
+		HostAdapter->BounceBuffersRequired = true;
+	/*
+	   Initialize parameters common to MultiMaster and FlashPoint Host Adapters.
+	 */
+      Common:
+	/*
+	   Initialize the Host Adapter Full Model Name from the Model Name.
+	 */
+	strcpy(HostAdapter->FullModelName, "BusLogic ");
+	strcat(HostAdapter->FullModelName, HostAdapter->ModelName);
+	/*
+	   Select an appropriate value for the Tagged Queue Depth either from a
+	   BusLogic Driver Options specification, or based on whether this Host
+	   Adapter requires that ISA Bounce Buffers be used.  The Tagged Queue Depth
+	   is left at 0 for automatic determination in BusLogic_SelectQueueDepths.
+	   Initialize the Untagged Queue Depth.
+	 */
+	for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
+		unsigned char QueueDepth = 0;
+		if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->QueueDepth[TargetID] > 0)
+			QueueDepth = HostAdapter->DriverOptions->QueueDepth[TargetID];
+		else if (HostAdapter->BounceBuffersRequired)
+			QueueDepth = BusLogic_TaggedQueueDepthBB;
+		HostAdapter->QueueDepth[TargetID] = QueueDepth;
+	}
+	if (HostAdapter->BounceBuffersRequired)
+		HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepthBB;
+	else
+		HostAdapter->UntaggedQueueDepth = BusLogic_UntaggedQueueDepth;
+	if (HostAdapter->DriverOptions != NULL)
+		HostAdapter->CommonQueueDepth = HostAdapter->DriverOptions->CommonQueueDepth;
+	if (HostAdapter->CommonQueueDepth > 0 && HostAdapter->CommonQueueDepth < HostAdapter->UntaggedQueueDepth)
+		HostAdapter->UntaggedQueueDepth = HostAdapter->CommonQueueDepth;
+	/*
+	   Tagged Queuing is only allowed if Disconnect/Reconnect is permitted.
+	   Therefore, mask the Tagged Queuing Permitted Default bits with the
+	   Disconnect/Reconnect Permitted bits.
+	 */
+	HostAdapter->TaggedQueuingPermitted &= HostAdapter->DisconnectPermitted;
+	/*
+	   Combine the default Tagged Queuing Permitted bits with any BusLogic Driver
+	   Options Tagged Queuing specification.
+	 */
+	if (HostAdapter->DriverOptions != NULL)
+		HostAdapter->TaggedQueuingPermitted =
+		    (HostAdapter->DriverOptions->TaggedQueuingPermitted & HostAdapter->DriverOptions->TaggedQueuingPermittedMask) | (HostAdapter->TaggedQueuingPermitted & ~HostAdapter->DriverOptions->TaggedQueuingPermittedMask);
+
+	/*
+	   Select an appropriate value for Bus Settle Time either from a BusLogic
+	   Driver Options specification, or from BusLogic_DefaultBusSettleTime.
+	 */
+	if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->BusSettleTime > 0)
+		HostAdapter->BusSettleTime = HostAdapter->DriverOptions->BusSettleTime;
+	else
+		HostAdapter->BusSettleTime = BusLogic_DefaultBusSettleTime;
+	/*
+	   Indicate reading the Host Adapter Configuration completed successfully.
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_ReportHostAdapterConfiguration reports the configuration of
+  Host Adapter.
+*/
+
+static boolean __init BusLogic_ReportHostAdapterConfiguration(struct BusLogic_HostAdapter
+							      *HostAdapter)
+{
+	unsigned short AllTargetsMask = (1 << HostAdapter->MaxTargetDevices) - 1;
+	unsigned short SynchronousPermitted, FastPermitted;
+	unsigned short UltraPermitted, WidePermitted;
+	unsigned short DisconnectPermitted, TaggedQueuingPermitted;
+	boolean CommonSynchronousNegotiation, CommonTaggedQueueDepth;
+	char SynchronousString[BusLogic_MaxTargetDevices + 1];
+	char WideString[BusLogic_MaxTargetDevices + 1];
+	char DisconnectString[BusLogic_MaxTargetDevices + 1];
+	char TaggedQueuingString[BusLogic_MaxTargetDevices + 1];
+	char *SynchronousMessage = SynchronousString;
+	char *WideMessage = WideString;
+	char *DisconnectMessage = DisconnectString;
+	char *TaggedQueuingMessage = TaggedQueuingString;
+	int TargetID;
+	BusLogic_Info("Configuring BusLogic Model %s %s%s%s%s SCSI Host Adapter\n",
+		      HostAdapter, HostAdapter->ModelName,
+		      BusLogic_HostAdapterBusNames[HostAdapter->HostAdapterBusType], (HostAdapter->HostWideSCSI ? " Wide" : ""), (HostAdapter->HostDifferentialSCSI ? " Differential" : ""), (HostAdapter->HostUltraSCSI ? " Ultra" : ""));
+	BusLogic_Info("  Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel: %d/%s\n", HostAdapter, HostAdapter->FirmwareVersion, HostAdapter->IO_Address, HostAdapter->IRQ_Channel, (HostAdapter->LevelSensitiveInterrupt ? "Level" : "Edge"));
+	if (HostAdapter->HostAdapterBusType != BusLogic_PCI_Bus) {
+		BusLogic_Info("  DMA Channel: ", HostAdapter);
+		if (HostAdapter->DMA_Channel > 0)
+			BusLogic_Info("%d, ", HostAdapter, HostAdapter->DMA_Channel);
+		else
+			BusLogic_Info("None, ", HostAdapter);
+		if (HostAdapter->BIOS_Address > 0)
+			BusLogic_Info("BIOS Address: 0x%X, ", HostAdapter, HostAdapter->BIOS_Address);
+		else
+			BusLogic_Info("BIOS Address: None, ", HostAdapter);
+	} else {
+		BusLogic_Info("  PCI Bus: %d, Device: %d, Address: ", HostAdapter, HostAdapter->Bus, HostAdapter->Device);
+		if (HostAdapter->PCI_Address > 0)
+			BusLogic_Info("0x%X, ", HostAdapter, HostAdapter->PCI_Address);
+		else
+			BusLogic_Info("Unassigned, ", HostAdapter);
+	}
+	BusLogic_Info("Host Adapter SCSI ID: %d\n", HostAdapter, HostAdapter->SCSI_ID);
+	BusLogic_Info("  Parity Checking: %s, Extended Translation: %s\n", HostAdapter, (HostAdapter->ParityCheckingEnabled ? "Enabled" : "Disabled"), (HostAdapter->ExtendedTranslationEnabled ? "Enabled" : "Disabled"));
+	AllTargetsMask &= ~(1 << HostAdapter->SCSI_ID);
+	SynchronousPermitted = HostAdapter->SynchronousPermitted & AllTargetsMask;
+	FastPermitted = HostAdapter->FastPermitted & AllTargetsMask;
+	UltraPermitted = HostAdapter->UltraPermitted & AllTargetsMask;
+	if ((BusLogic_MultiMasterHostAdapterP(HostAdapter) && (HostAdapter->FirmwareVersion[0] >= '4' || HostAdapter->HostAdapterBusType == BusLogic_EISA_Bus)) || BusLogic_FlashPointHostAdapterP(HostAdapter)) {
+		CommonSynchronousNegotiation = false;
+		if (SynchronousPermitted == 0) {
+			SynchronousMessage = "Disabled";
+			CommonSynchronousNegotiation = true;
+		} else if (SynchronousPermitted == AllTargetsMask) {
+			if (FastPermitted == 0) {
+				SynchronousMessage = "Slow";
+				CommonSynchronousNegotiation = true;
+			} else if (FastPermitted == AllTargetsMask) {
+				if (UltraPermitted == 0) {
+					SynchronousMessage = "Fast";
+					CommonSynchronousNegotiation = true;
+				} else if (UltraPermitted == AllTargetsMask) {
+					SynchronousMessage = "Ultra";
+					CommonSynchronousNegotiation = true;
+				}
+			}
+		}
+		if (!CommonSynchronousNegotiation) {
+			for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+				SynchronousString[TargetID] = ((!(SynchronousPermitted & (1 << TargetID))) ? 'N' : (!(FastPermitted & (1 << TargetID)) ? 'S' : (!(UltraPermitted & (1 << TargetID)) ? 'F' : 'U')));
+			SynchronousString[HostAdapter->SCSI_ID] = '#';
+			SynchronousString[HostAdapter->MaxTargetDevices] = '\0';
+		}
+	} else
+		SynchronousMessage = (SynchronousPermitted == 0 ? "Disabled" : "Enabled");
+	WidePermitted = HostAdapter->WidePermitted & AllTargetsMask;
+	if (WidePermitted == 0)
+		WideMessage = "Disabled";
+	else if (WidePermitted == AllTargetsMask)
+		WideMessage = "Enabled";
+	else {
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			WideString[TargetID] = ((WidePermitted & (1 << TargetID)) ? 'Y' : 'N');
+		WideString[HostAdapter->SCSI_ID] = '#';
+		WideString[HostAdapter->MaxTargetDevices] = '\0';
+	}
+	DisconnectPermitted = HostAdapter->DisconnectPermitted & AllTargetsMask;
+	if (DisconnectPermitted == 0)
+		DisconnectMessage = "Disabled";
+	else if (DisconnectPermitted == AllTargetsMask)
+		DisconnectMessage = "Enabled";
+	else {
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			DisconnectString[TargetID] = ((DisconnectPermitted & (1 << TargetID)) ? 'Y' : 'N');
+		DisconnectString[HostAdapter->SCSI_ID] = '#';
+		DisconnectString[HostAdapter->MaxTargetDevices] = '\0';
+	}
+	TaggedQueuingPermitted = HostAdapter->TaggedQueuingPermitted & AllTargetsMask;
+	if (TaggedQueuingPermitted == 0)
+		TaggedQueuingMessage = "Disabled";
+	else if (TaggedQueuingPermitted == AllTargetsMask)
+		TaggedQueuingMessage = "Enabled";
+	else {
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			TaggedQueuingString[TargetID] = ((TaggedQueuingPermitted & (1 << TargetID)) ? 'Y' : 'N');
+		TaggedQueuingString[HostAdapter->SCSI_ID] = '#';
+		TaggedQueuingString[HostAdapter->MaxTargetDevices] = '\0';
+	}
+	BusLogic_Info("  Synchronous Negotiation: %s, Wide Negotiation: %s\n", HostAdapter, SynchronousMessage, WideMessage);
+	BusLogic_Info("  Disconnect/Reconnect: %s, Tagged Queuing: %s\n", HostAdapter, DisconnectMessage, TaggedQueuingMessage);
+	if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
+		BusLogic_Info("  Scatter/Gather Limit: %d of %d segments, " "Mailboxes: %d\n", HostAdapter, HostAdapter->DriverScatterGatherLimit, HostAdapter->HostAdapterScatterGatherLimit, HostAdapter->MailboxCount);
+		BusLogic_Info("  Driver Queue Depth: %d, " "Host Adapter Queue Depth: %d\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->HostAdapterQueueDepth);
+	} else
+		BusLogic_Info("  Driver Queue Depth: %d, " "Scatter/Gather Limit: %d segments\n", HostAdapter, HostAdapter->DriverQueueDepth, HostAdapter->DriverScatterGatherLimit);
+	BusLogic_Info("  Tagged Queue Depth: ", HostAdapter);
+	CommonTaggedQueueDepth = true;
+	for (TargetID = 1; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+		if (HostAdapter->QueueDepth[TargetID] != HostAdapter->QueueDepth[0]) {
+			CommonTaggedQueueDepth = false;
+			break;
+		}
+	if (CommonTaggedQueueDepth) {
+		if (HostAdapter->QueueDepth[0] > 0)
+			BusLogic_Info("%d", HostAdapter, HostAdapter->QueueDepth[0]);
+		else
+			BusLogic_Info("Automatic", HostAdapter);
+	} else
+		BusLogic_Info("Individual", HostAdapter);
+	BusLogic_Info(", Untagged Queue Depth: %d\n", HostAdapter, HostAdapter->UntaggedQueueDepth);
+	if (HostAdapter->TerminationInfoValid) {
+		if (HostAdapter->HostWideSCSI)
+			BusLogic_Info("  SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? (HostAdapter->HighByteTerminated ? "Both Enabled" : "Low Enabled")
+										  : (HostAdapter->HighByteTerminated ? "High Enabled" : "Both Disabled")));
+		else
+			BusLogic_Info("  SCSI Bus Termination: %s", HostAdapter, (HostAdapter->LowByteTerminated ? "Enabled" : "Disabled"));
+		if (HostAdapter->HostSupportsSCAM)
+			BusLogic_Info(", SCAM: %s", HostAdapter, (HostAdapter->SCAM_Enabled ? (HostAdapter->SCAM_Level2 ? "Enabled, Level 2" : "Enabled, Level 1")
+								  : "Disabled"));
+		BusLogic_Info("\n", HostAdapter);
+	}
+	/*
+	   Indicate reporting the Host Adapter configuration completed successfully.
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_AcquireResources acquires the system resources necessary to use
+  Host Adapter.
+*/
+
+static boolean __init BusLogic_AcquireResources(struct BusLogic_HostAdapter *HostAdapter)
+{
+	if (HostAdapter->IRQ_Channel == 0) {
+		BusLogic_Error("NO LEGAL INTERRUPT CHANNEL ASSIGNED - DETACHING\n", HostAdapter);
+		return false;
+	}
+	/*
+	   Acquire shared access to the IRQ Channel.
+	 */
+	if (request_irq(HostAdapter->IRQ_Channel, BusLogic_InterruptHandler, SA_SHIRQ, HostAdapter->FullModelName, HostAdapter) < 0) {
+		BusLogic_Error("UNABLE TO ACQUIRE IRQ CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->IRQ_Channel);
+		return false;
+	}
+	HostAdapter->IRQ_ChannelAcquired = true;
+	/*
+	   Acquire exclusive access to the DMA Channel.
+	 */
+	if (HostAdapter->DMA_Channel > 0) {
+		if (request_dma(HostAdapter->DMA_Channel, HostAdapter->FullModelName) < 0) {
+			BusLogic_Error("UNABLE TO ACQUIRE DMA CHANNEL %d - DETACHING\n", HostAdapter, HostAdapter->DMA_Channel);
+			return false;
+		}
+		set_dma_mode(HostAdapter->DMA_Channel, DMA_MODE_CASCADE);
+		enable_dma(HostAdapter->DMA_Channel);
+		HostAdapter->DMA_ChannelAcquired = true;
+	}
+	/*
+	   Indicate the System Resource Acquisition completed successfully,
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_ReleaseResources releases any system resources previously acquired
+  by BusLogic_AcquireResources.
+*/
+
+static void BusLogic_ReleaseResources(struct BusLogic_HostAdapter *HostAdapter)
+{
+	/*
+	   Release shared access to the IRQ Channel.
+	 */
+	if (HostAdapter->IRQ_ChannelAcquired)
+		free_irq(HostAdapter->IRQ_Channel, HostAdapter);
+	/*
+	   Release exclusive access to the DMA Channel.
+	 */
+	if (HostAdapter->DMA_ChannelAcquired)
+		free_dma(HostAdapter->DMA_Channel);
+	/*
+	   Release any allocated memory structs not released elsewhere
+	 */
+	if (HostAdapter->MailboxSpace)
+		pci_free_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, HostAdapter->MailboxSpace, HostAdapter->MailboxSpaceHandle);
+	HostAdapter->MailboxSpace = NULL;
+	HostAdapter->MailboxSpaceHandle = 0;
+	HostAdapter->MailboxSize = 0;
+}
+
+
+/*
+  BusLogic_InitializeHostAdapter initializes Host Adapter.  This is the only
+  function called during SCSI Host Adapter detection which modifies the state
+  of the Host Adapter from its initial power on or hard reset state.
+*/
+
+static boolean BusLogic_InitializeHostAdapter(struct BusLogic_HostAdapter
+					      *HostAdapter)
+{
+	struct BusLogic_ExtendedMailboxRequest ExtendedMailboxRequest;
+	enum BusLogic_RoundRobinModeRequest RoundRobinModeRequest;
+	enum BusLogic_SetCCBFormatRequest SetCCBFormatRequest;
+	int TargetID;
+	/*
+	   Initialize the pointers to the first and last CCBs that are queued for
+	   completion processing.
+	 */
+	HostAdapter->FirstCompletedCCB = NULL;
+	HostAdapter->LastCompletedCCB = NULL;
+	/*
+	   Initialize the Bus Device Reset Pending CCB, Tagged Queuing Active,
+	   Command Successful Flag, Active Commands, and Commands Since Reset
+	   for each Target Device.
+	 */
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
+		HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
+		HostAdapter->TargetFlags[TargetID].CommandSuccessfulFlag = false;
+		HostAdapter->ActiveCommands[TargetID] = 0;
+		HostAdapter->CommandsSinceReset[TargetID] = 0;
+	}
+	/*
+	   FlashPoint Host Adapters do not use Outgoing and Incoming Mailboxes.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter))
+		goto Done;
+	/*
+	   Initialize the Outgoing and Incoming Mailbox pointers.
+	 */
+	HostAdapter->MailboxSize = HostAdapter->MailboxCount * (sizeof(struct BusLogic_OutgoingMailbox) + sizeof(struct BusLogic_IncomingMailbox));
+	HostAdapter->MailboxSpace = pci_alloc_consistent(HostAdapter->PCI_Device, HostAdapter->MailboxSize, &HostAdapter->MailboxSpaceHandle);
+	if (HostAdapter->MailboxSpace == NULL)
+		return BusLogic_Failure(HostAdapter, "MAILBOX ALLOCATION");
+	HostAdapter->FirstOutgoingMailbox = (struct BusLogic_OutgoingMailbox *) HostAdapter->MailboxSpace;
+	HostAdapter->LastOutgoingMailbox = HostAdapter->FirstOutgoingMailbox + HostAdapter->MailboxCount - 1;
+	HostAdapter->NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
+	HostAdapter->FirstIncomingMailbox = (struct BusLogic_IncomingMailbox *) (HostAdapter->LastOutgoingMailbox + 1);
+	HostAdapter->LastIncomingMailbox = HostAdapter->FirstIncomingMailbox + HostAdapter->MailboxCount - 1;
+	HostAdapter->NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
+
+	/*
+	   Initialize the Outgoing and Incoming Mailbox structures.
+	 */
+	memset(HostAdapter->FirstOutgoingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_OutgoingMailbox));
+	memset(HostAdapter->FirstIncomingMailbox, 0, HostAdapter->MailboxCount * sizeof(struct BusLogic_IncomingMailbox));
+	/*
+	   Initialize the Host Adapter's Pointer to the Outgoing/Incoming Mailboxes.
+	 */
+	ExtendedMailboxRequest.MailboxCount = HostAdapter->MailboxCount;
+	ExtendedMailboxRequest.BaseMailboxAddress = (u32) HostAdapter->MailboxSpaceHandle;
+	if (BusLogic_Command(HostAdapter, BusLogic_InitializeExtendedMailbox, &ExtendedMailboxRequest, sizeof(ExtendedMailboxRequest), NULL, 0) < 0)
+		return BusLogic_Failure(HostAdapter, "MAILBOX INITIALIZATION");
+	/*
+	   Enable Strict Round Robin Mode if supported by the Host Adapter.  In
+	   Strict Round Robin Mode, the Host Adapter only looks at the next Outgoing
+	   Mailbox for each new command, rather than scanning through all the
+	   Outgoing Mailboxes to find any that have new commands in them.  Strict
+	   Round Robin Mode is significantly more efficient.
+	 */
+	if (HostAdapter->StrictRoundRobinModeSupport) {
+		RoundRobinModeRequest = BusLogic_StrictRoundRobinMode;
+		if (BusLogic_Command(HostAdapter, BusLogic_EnableStrictRoundRobinMode, &RoundRobinModeRequest, sizeof(RoundRobinModeRequest), NULL, 0) < 0)
+			return BusLogic_Failure(HostAdapter, "ENABLE STRICT ROUND ROBIN MODE");
+	}
+	/*
+	   For Host Adapters that support Extended LUN Format CCBs, issue the Set CCB
+	   Format command to allow 32 Logical Units per Target Device.
+	 */
+	if (HostAdapter->ExtendedLUNSupport) {
+		SetCCBFormatRequest = BusLogic_ExtendedLUNFormatCCB;
+		if (BusLogic_Command(HostAdapter, BusLogic_SetCCBFormat, &SetCCBFormatRequest, sizeof(SetCCBFormatRequest), NULL, 0) < 0)
+			return BusLogic_Failure(HostAdapter, "SET CCB FORMAT");
+	}
+	/*
+	   Announce Successful Initialization.
+	 */
+      Done:
+	if (!HostAdapter->HostAdapterInitialized) {
+		BusLogic_Info("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
+		BusLogic_Info("\n", HostAdapter);
+	} else
+		BusLogic_Warning("*** %s Initialized Successfully ***\n", HostAdapter, HostAdapter->FullModelName);
+	HostAdapter->HostAdapterInitialized = true;
+	/*
+	   Indicate the Host Adapter Initialization completed successfully.
+	 */
+	return true;
+}
+
+
+/*
+  BusLogic_TargetDeviceInquiry inquires about the Target Devices accessible
+  through Host Adapter.
+*/
+
+static boolean __init BusLogic_TargetDeviceInquiry(struct BusLogic_HostAdapter
+						   *HostAdapter)
+{
+	u16 InstalledDevices;
+	u8 InstalledDevicesID0to7[8];
+	struct BusLogic_SetupInformation SetupInformation;
+	u8 SynchronousPeriod[BusLogic_MaxTargetDevices];
+	unsigned char RequestedReplyLength;
+	int TargetID;
+	/*
+	   Wait a few seconds between the Host Adapter Hard Reset which initiates
+	   a SCSI Bus Reset and issuing any SCSI Commands.  Some SCSI devices get
+	   confused if they receive SCSI Commands too soon after a SCSI Bus Reset.
+	 */
+	BusLogic_Delay(HostAdapter->BusSettleTime);
+	/*
+	   FlashPoint Host Adapters do not provide for Target Device Inquiry.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter))
+		return true;
+	/*
+	   Inhibit the Target Device Inquiry if requested.
+	 */
+	if (HostAdapter->DriverOptions != NULL && HostAdapter->DriverOptions->LocalOptions.InhibitTargetInquiry)
+		return true;
+	/*
+	   Issue the Inquire Target Devices command for host adapters with firmware
+	   version 4.25 or later, or the Inquire Installed Devices ID 0 to 7 command
+	   for older host adapters.  This is necessary to force Synchronous Transfer
+	   Negotiation so that the Inquire Setup Information and Inquire Synchronous
+	   Period commands will return valid data.  The Inquire Target Devices command
+	   is preferable to Inquire Installed Devices ID 0 to 7 since it only probes
+	   Logical Unit 0 of each Target Device.
+	 */
+	if (strcmp(HostAdapter->FirmwareVersion, "4.25") >= 0) {
+
+		/*
+		 * Issue a Inquire Target Devices command.  Inquire Target Devices only
+		 * tests Logical Unit 0 of each Target Device unlike the Inquire Installed
+		 * Devices commands which test Logical Units 0 - 7.  Two bytes are
+		 * returned, where byte 0 bit 0 set indicates that Target Device 0 exists,
+		 * and so on.
+		 */
+
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireTargetDevices, NULL, 0, &InstalledDevices, sizeof(InstalledDevices))
+		    != sizeof(InstalledDevices))
+			return BusLogic_Failure(HostAdapter, "INQUIRE TARGET DEVICES");
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevices & (1 << TargetID) ? true : false);
+	} else {
+
+		/*
+		 * Issue an Inquire Installed Devices command.  For each Target Device,
+		 * a byte is returned where bit 0 set indicates that Logical Unit 0
+		 * exists, bit 1 set indicates that Logical Unit 1 exists, and so on.
+		 */
+
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireInstalledDevicesID0to7, NULL, 0, &InstalledDevicesID0to7, sizeof(InstalledDevicesID0to7))
+		    != sizeof(InstalledDevicesID0to7))
+			return BusLogic_Failure(HostAdapter, "INQUIRE INSTALLED DEVICES ID 0 TO 7");
+		for (TargetID = 0; TargetID < 8; TargetID++)
+			HostAdapter->TargetFlags[TargetID].TargetExists = (InstalledDevicesID0to7[TargetID] != 0 ? true : false);
+	}
+	/*
+	   Issue the Inquire Setup Information command.
+	 */
+	RequestedReplyLength = sizeof(SetupInformation);
+	if (BusLogic_Command(HostAdapter, BusLogic_InquireSetupInformation, &RequestedReplyLength, sizeof(RequestedReplyLength), &SetupInformation, sizeof(SetupInformation))
+	    != sizeof(SetupInformation))
+		return BusLogic_Failure(HostAdapter, "INQUIRE SETUP INFORMATION");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+		HostAdapter->SynchronousOffset[TargetID] = (TargetID < 8 ? SetupInformation.SynchronousValuesID0to7[TargetID].Offset : SetupInformation.SynchronousValuesID8to15[TargetID - 8].Offset);
+	if (strcmp(HostAdapter->FirmwareVersion, "5.06L") >= 0)
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			HostAdapter->TargetFlags[TargetID].WideTransfersActive = (TargetID < 8 ? (SetupInformation.WideTransfersActiveID0to7 & (1 << TargetID)
+												  ? true : false)
+										  : (SetupInformation.WideTransfersActiveID8to15 & (1 << (TargetID - 8))
+										     ? true : false));
+	/*
+	   Issue the Inquire Synchronous Period command.
+	 */
+	if (HostAdapter->FirmwareVersion[0] >= '3') {
+
+		/* Issue a Inquire Synchronous Period command.  For each Target Device,
+		 * a byte is returned which represents the Synchronous Transfer Period
+		 * in units of 10 nanoseconds.
+		 */
+
+		RequestedReplyLength = sizeof(SynchronousPeriod);
+		if (BusLogic_Command(HostAdapter, BusLogic_InquireSynchronousPeriod, &RequestedReplyLength, sizeof(RequestedReplyLength), &SynchronousPeriod, sizeof(SynchronousPeriod))
+		    != sizeof(SynchronousPeriod))
+			return BusLogic_Failure(HostAdapter, "INQUIRE SYNCHRONOUS PERIOD");
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			HostAdapter->SynchronousPeriod[TargetID] = SynchronousPeriod[TargetID];
+	} else
+		for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+			if (SetupInformation.SynchronousValuesID0to7[TargetID].Offset > 0)
+				HostAdapter->SynchronousPeriod[TargetID] = 20 + 5 * SetupInformation.SynchronousValuesID0to7[TargetID]
+				    .TransferPeriod;
+	/*
+	   Indicate the Target Device Inquiry completed successfully.
+	 */
+	return true;
+}
+
+/*
+  BusLogic_InitializeHostStructure initializes the fields in the SCSI Host
+  structure.  The base, io_port, n_io_ports, irq, and dma_channel fields in the
+  SCSI Host structure are intentionally left uninitialized, as this driver
+  handles acquisition and release of these resources explicitly, as well as
+  ensuring exclusive access to the Host Adapter hardware and data structures
+  through explicit acquisition and release of the Host Adapter's Lock.
+*/
+
+static void __init BusLogic_InitializeHostStructure(struct BusLogic_HostAdapter
+						    *HostAdapter, struct Scsi_Host *Host)
+{
+	Host->max_id = HostAdapter->MaxTargetDevices;
+	Host->max_lun = HostAdapter->MaxLogicalUnits;
+	Host->max_channel = 0;
+	Host->unique_id = HostAdapter->IO_Address;
+	Host->this_id = HostAdapter->SCSI_ID;
+	Host->can_queue = HostAdapter->DriverQueueDepth;
+	Host->sg_tablesize = HostAdapter->DriverScatterGatherLimit;
+	Host->unchecked_isa_dma = HostAdapter->BounceBuffersRequired;
+	Host->cmd_per_lun = HostAdapter->UntaggedQueueDepth;
+}
+
+/*
+  BusLogic_SlaveConfigure will actually set the queue depth on individual
+  scsi devices as they are permanently added to the device chain.  We
+  shamelessly rip off the SelectQueueDepths code to make this work mostly
+  like it used to.  Since we don't get called once at the end of the scan
+  but instead get called for each device, we have to do things a bit
+  differently.
+*/
+static int BusLogic_SlaveConfigure(struct scsi_device *Device)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Device->host->hostdata;
+	int TargetID = Device->id;
+	int QueueDepth = HostAdapter->QueueDepth[TargetID];
+
+	if (HostAdapter->TargetFlags[TargetID].TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
+		if (QueueDepth == 0)
+			QueueDepth = BusLogic_MaxAutomaticTaggedQueueDepth;
+		HostAdapter->QueueDepth[TargetID] = QueueDepth;
+		scsi_adjust_queue_depth(Device, MSG_SIMPLE_TAG, QueueDepth);
+	} else {
+		HostAdapter->TaggedQueuingPermitted &= ~(1 << TargetID);
+		QueueDepth = HostAdapter->UntaggedQueueDepth;
+		HostAdapter->QueueDepth[TargetID] = QueueDepth;
+		scsi_adjust_queue_depth(Device, 0, QueueDepth);
+	}
+	QueueDepth = 0;
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++)
+		if (HostAdapter->TargetFlags[TargetID].TargetExists) {
+			QueueDepth += HostAdapter->QueueDepth[TargetID];
+		}
+	if (QueueDepth > HostAdapter->AllocatedCCBs)
+		BusLogic_CreateAdditionalCCBs(HostAdapter, QueueDepth - HostAdapter->AllocatedCCBs, false);
+	return 0;
+}
+
+/*
+  BusLogic_DetectHostAdapter probes for BusLogic Host Adapters at the standard
+  I/O Addresses where they may be located, initializing, registering, and
+  reporting the configuration of each BusLogic Host Adapter it finds.  It
+  returns the number of BusLogic Host Adapters successfully initialized and
+  registered.
+*/
+
+static int __init BusLogic_init(void)
+{
+	int BusLogicHostAdapterCount = 0, DriverOptionsIndex = 0, ProbeIndex;
+	struct BusLogic_HostAdapter *PrototypeHostAdapter;
+
+#ifdef MODULE
+	if (BusLogic)
+		BusLogic_Setup(BusLogic);
+#endif
+
+	if (BusLogic_ProbeOptions.NoProbe)
+		return -ENODEV;
+	BusLogic_ProbeInfoList = (struct BusLogic_ProbeInfo *)
+	    kmalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_ATOMIC);
+	if (BusLogic_ProbeInfoList == NULL) {
+		BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL);
+		return -ENOMEM;
+	}
+	memset(BusLogic_ProbeInfoList, 0, BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo));
+	PrototypeHostAdapter = (struct BusLogic_HostAdapter *)
+	    kmalloc(sizeof(struct BusLogic_HostAdapter), GFP_ATOMIC);
+	if (PrototypeHostAdapter == NULL) {
+		kfree(BusLogic_ProbeInfoList);
+		BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL);
+		return -ENOMEM;
+	}
+	memset(PrototypeHostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
+#ifdef MODULE
+	if (BusLogic != NULL)
+		BusLogic_Setup(BusLogic);
+#endif
+	BusLogic_InitializeProbeInfoList(PrototypeHostAdapter);
+	for (ProbeIndex = 0; ProbeIndex < BusLogic_ProbeInfoCount; ProbeIndex++) {
+		struct BusLogic_ProbeInfo *ProbeInfo = &BusLogic_ProbeInfoList[ProbeIndex];
+		struct BusLogic_HostAdapter *HostAdapter = PrototypeHostAdapter;
+		struct Scsi_Host *Host;
+		if (ProbeInfo->IO_Address == 0)
+			continue;
+		memset(HostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
+		HostAdapter->HostAdapterType = ProbeInfo->HostAdapterType;
+		HostAdapter->HostAdapterBusType = ProbeInfo->HostAdapterBusType;
+		HostAdapter->IO_Address = ProbeInfo->IO_Address;
+		HostAdapter->PCI_Address = ProbeInfo->PCI_Address;
+		HostAdapter->Bus = ProbeInfo->Bus;
+		HostAdapter->Device = ProbeInfo->Device;
+		HostAdapter->IRQ_Channel = ProbeInfo->IRQ_Channel;
+		HostAdapter->AddressCount = BusLogic_HostAdapterAddressCount[HostAdapter->HostAdapterType];
+		/*
+		   Probe the Host Adapter.  If unsuccessful, abort further initialization.
+		 */
+		if (!BusLogic_ProbeHostAdapter(HostAdapter))
+			continue;
+		/*
+		   Hard Reset the Host Adapter.  If unsuccessful, abort further
+		   initialization.
+		 */
+		if (!BusLogic_HardwareResetHostAdapter(HostAdapter, true))
+			continue;
+		/*
+		   Check the Host Adapter.  If unsuccessful, abort further initialization.
+		 */
+		if (!BusLogic_CheckHostAdapter(HostAdapter))
+			continue;
+		/*
+		   Initialize the Driver Options field if provided.
+		 */
+		if (DriverOptionsIndex < BusLogic_DriverOptionsCount)
+			HostAdapter->DriverOptions = &BusLogic_DriverOptions[DriverOptionsIndex++];
+		/*
+		   Announce the Driver Version and Date, Author's Name, Copyright Notice,
+		   and Electronic Mail Address.
+		 */
+		BusLogic_AnnounceDriver(HostAdapter);
+		/*
+		   Register usage of the I/O Address range.  From this point onward, any
+		   failure will be assumed to be due to a problem with the Host Adapter,
+		   rather than due to having mistakenly identified this port as belonging
+		   to a BusLogic Host Adapter.  The I/O Address range will not be
+		   released, thereby preventing it from being incorrectly identified as
+		   any other type of Host Adapter.
+		 */
+		if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, "BusLogic"))
+			continue;
+		/*
+		   Register the SCSI Host structure.
+		 */
+
+		Host = scsi_host_alloc(&Bus_Logic_template, sizeof(struct BusLogic_HostAdapter));
+		if (Host == NULL) {
+			release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
+			continue;
+		}
+		HostAdapter = (struct BusLogic_HostAdapter *) Host->hostdata;
+		memcpy(HostAdapter, PrototypeHostAdapter, sizeof(struct BusLogic_HostAdapter));
+		HostAdapter->SCSI_Host = Host;
+		HostAdapter->HostNumber = Host->host_no;
+		/*
+		   Add Host Adapter to the end of the list of registered BusLogic
+		   Host Adapters.
+		 */
+		list_add_tail(&HostAdapter->host_list, &BusLogic_host_list);
+
+		/*
+		   Read the Host Adapter Configuration, Configure the Host Adapter,
+		   Acquire the System Resources necessary to use the Host Adapter, then
+		   Create the Initial CCBs, Initialize the Host Adapter, and finally
+		   perform Target Device Inquiry.
+		 */
+		if (BusLogic_ReadHostAdapterConfiguration(HostAdapter) &&
+		    BusLogic_ReportHostAdapterConfiguration(HostAdapter) && BusLogic_AcquireResources(HostAdapter) && BusLogic_CreateInitialCCBs(HostAdapter) && BusLogic_InitializeHostAdapter(HostAdapter) && BusLogic_TargetDeviceInquiry(HostAdapter)) {
+			/*
+			   Initialization has been completed successfully.  Release and
+			   re-register usage of the I/O Address range so that the Model
+			   Name of the Host Adapter will appear, and initialize the SCSI
+			   Host structure.
+			 */
+			release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
+			if (!request_region(HostAdapter->IO_Address, HostAdapter->AddressCount, HostAdapter->FullModelName)) {
+				printk(KERN_WARNING "BusLogic: Release and re-register of " "port 0x%04lx failed \n", (unsigned long) HostAdapter->IO_Address);
+				BusLogic_DestroyCCBs(HostAdapter);
+				BusLogic_ReleaseResources(HostAdapter);
+				list_del(&HostAdapter->host_list);
+				scsi_host_put(Host);
+			} else {
+				BusLogic_InitializeHostStructure(HostAdapter, Host);
+				scsi_add_host(Host, NULL);
+				scsi_scan_host(Host);
+				BusLogicHostAdapterCount++;
+			}
+		} else {
+			/*
+			   An error occurred during Host Adapter Configuration Querying, Host
+			   Adapter Configuration, Resource Acquisition, CCB Creation, Host
+			   Adapter Initialization, or Target Device Inquiry, so remove Host
+			   Adapter from the list of registered BusLogic Host Adapters, destroy
+			   the CCBs, Release the System Resources, and Unregister the SCSI
+			   Host.
+			 */
+			BusLogic_DestroyCCBs(HostAdapter);
+			BusLogic_ReleaseResources(HostAdapter);
+			list_del(&HostAdapter->host_list);
+			scsi_host_put(Host);
+		}
+	}
+	kfree(PrototypeHostAdapter);
+	kfree(BusLogic_ProbeInfoList);
+	BusLogic_ProbeInfoList = NULL;
+	return 0;
+}
+
+
+/*
+  BusLogic_ReleaseHostAdapter releases all resources previously acquired to
+  support a specific Host Adapter, including the I/O Address range, and
+  unregisters the BusLogic Host Adapter.
+*/
+
+static int __exit BusLogic_ReleaseHostAdapter(struct BusLogic_HostAdapter *HostAdapter)
+{
+	struct Scsi_Host *Host = HostAdapter->SCSI_Host;
+
+	scsi_remove_host(Host);
+
+	/*
+	   FlashPoint Host Adapters must first be released by the FlashPoint
+	   SCCB Manager.
+	 */
+	if (BusLogic_FlashPointHostAdapterP(HostAdapter))
+		FlashPoint_ReleaseHostAdapter(HostAdapter->CardHandle);
+	/*
+	   Destroy the CCBs and release any system resources acquired to
+	   support Host Adapter.
+	 */
+	BusLogic_DestroyCCBs(HostAdapter);
+	BusLogic_ReleaseResources(HostAdapter);
+	/*
+	   Release usage of the I/O Address range.
+	 */
+	release_region(HostAdapter->IO_Address, HostAdapter->AddressCount);
+	/*
+	   Remove Host Adapter from the list of registered BusLogic Host Adapters.
+	 */
+	list_del(&HostAdapter->host_list);
+
+	scsi_host_put(Host);
+	return 0;
+}
+
+
+/*
+  BusLogic_QueueCompletedCCB queues CCB for completion processing.
+*/
+
+static void BusLogic_QueueCompletedCCB(struct BusLogic_CCB *CCB)
+{
+	struct BusLogic_HostAdapter *HostAdapter = CCB->HostAdapter;
+	CCB->Status = BusLogic_CCB_Completed;
+	CCB->Next = NULL;
+	if (HostAdapter->FirstCompletedCCB == NULL) {
+		HostAdapter->FirstCompletedCCB = CCB;
+		HostAdapter->LastCompletedCCB = CCB;
+	} else {
+		HostAdapter->LastCompletedCCB->Next = CCB;
+		HostAdapter->LastCompletedCCB = CCB;
+	}
+	HostAdapter->ActiveCommands[CCB->TargetID]--;
+}
+
+
+/*
+  BusLogic_ComputeResultCode computes a SCSI Subsystem Result Code from
+  the Host Adapter Status and Target Device Status.
+*/
+
+static int BusLogic_ComputeResultCode(struct BusLogic_HostAdapter *HostAdapter, enum BusLogic_HostAdapterStatus HostAdapterStatus, enum BusLogic_TargetDeviceStatus TargetDeviceStatus)
+{
+	int HostStatus;
+	switch (HostAdapterStatus) {
+	case BusLogic_CommandCompletedNormally:
+	case BusLogic_LinkedCommandCompleted:
+	case BusLogic_LinkedCommandCompletedWithFlag:
+		HostStatus = DID_OK;
+		break;
+	case BusLogic_SCSISelectionTimeout:
+		HostStatus = DID_TIME_OUT;
+		break;
+	case BusLogic_InvalidOutgoingMailboxActionCode:
+	case BusLogic_InvalidCommandOperationCode:
+	case BusLogic_InvalidCommandParameter:
+		BusLogic_Warning("BusLogic Driver Protocol Error 0x%02X\n", HostAdapter, HostAdapterStatus);
+	case BusLogic_DataUnderRun:
+	case BusLogic_DataOverRun:
+	case BusLogic_UnexpectedBusFree:
+	case BusLogic_LinkedCCBhasInvalidLUN:
+	case BusLogic_AutoRequestSenseFailed:
+	case BusLogic_TaggedQueuingMessageRejected:
+	case BusLogic_UnsupportedMessageReceived:
+	case BusLogic_HostAdapterHardwareFailed:
+	case BusLogic_TargetDeviceReconnectedImproperly:
+	case BusLogic_AbortQueueGenerated:
+	case BusLogic_HostAdapterSoftwareError:
+	case BusLogic_HostAdapterHardwareTimeoutError:
+	case BusLogic_SCSIParityErrorDetected:
+		HostStatus = DID_ERROR;
+		break;
+	case BusLogic_InvalidBusPhaseRequested:
+	case BusLogic_TargetFailedResponseToATN:
+	case BusLogic_HostAdapterAssertedRST:
+	case BusLogic_OtherDeviceAssertedRST:
+	case BusLogic_HostAdapterAssertedBusDeviceReset:
+		HostStatus = DID_RESET;
+		break;
+	default:
+		BusLogic_Warning("Unknown Host Adapter Status 0x%02X\n", HostAdapter, HostAdapterStatus);
+		HostStatus = DID_ERROR;
+		break;
+	}
+	return (HostStatus << 16) | TargetDeviceStatus;
+}
+
+
+/*
+  BusLogic_ScanIncomingMailboxes scans the Incoming Mailboxes saving any
+  Incoming Mailbox entries for completion processing.
+*/
+
+static void BusLogic_ScanIncomingMailboxes(struct BusLogic_HostAdapter *HostAdapter)
+{
+	/*
+	   Scan through the Incoming Mailboxes in Strict Round Robin fashion, saving
+	   any completed CCBs for further processing.  It is essential that for each
+	   CCB and SCSI Command issued, command completion processing is performed
+	   exactly once.  Therefore, only Incoming Mailboxes with completion code
+	   Command Completed Without Error, Command Completed With Error, or Command
+	   Aborted At Host Request are saved for completion processing.  When an
+	   Incoming Mailbox has a completion code of Aborted Command Not Found, the
+	   CCB had already completed or been aborted before the current Abort request
+	   was processed, and so completion processing has already occurred and no
+	   further action should be taken.
+	 */
+	struct BusLogic_IncomingMailbox *NextIncomingMailbox = HostAdapter->NextIncomingMailbox;
+	enum BusLogic_CompletionCode CompletionCode;
+	while ((CompletionCode = NextIncomingMailbox->CompletionCode) != BusLogic_IncomingMailboxFree) {
+		/*
+		   We are only allowed to do this because we limit our architectures we
+		   run on to machines where bus_to_virt() actually works.  There *needs*
+		   to be a dma_addr_to_virt() in the new PCI DMA mapping interface to
+		   replace bus_to_virt() or else this code is going to become very
+		   innefficient.
+		 */
+		struct BusLogic_CCB *CCB = (struct BusLogic_CCB *) Bus_to_Virtual(NextIncomingMailbox->CCB);
+		if (CompletionCode != BusLogic_AbortedCommandNotFound) {
+			if (CCB->Status == BusLogic_CCB_Active || CCB->Status == BusLogic_CCB_Reset) {
+				/*
+				   Save the Completion Code for this CCB and queue the CCB
+				   for completion processing.
+				 */
+				CCB->CompletionCode = CompletionCode;
+				BusLogic_QueueCompletedCCB(CCB);
+			} else {
+				/*
+				   If a CCB ever appears in an Incoming Mailbox and is not marked
+				   as status Active or Reset, then there is most likely a bug in
+				   the Host Adapter firmware.
+				 */
+				BusLogic_Warning("Illegal CCB #%ld status %d in " "Incoming Mailbox\n", HostAdapter, CCB->SerialNumber, CCB->Status);
+			}
+		}
+		NextIncomingMailbox->CompletionCode = BusLogic_IncomingMailboxFree;
+		if (++NextIncomingMailbox > HostAdapter->LastIncomingMailbox)
+			NextIncomingMailbox = HostAdapter->FirstIncomingMailbox;
+	}
+	HostAdapter->NextIncomingMailbox = NextIncomingMailbox;
+}
+
+
+/*
+  BusLogic_ProcessCompletedCCBs iterates over the completed CCBs for Host
+  Adapter setting the SCSI Command Result Codes, deallocating the CCBs, and
+  calling the SCSI Subsystem Completion Routines.  The Host Adapter's Lock
+  should already have been acquired by the caller.
+*/
+
+static void BusLogic_ProcessCompletedCCBs(struct BusLogic_HostAdapter *HostAdapter)
+{
+	if (HostAdapter->ProcessCompletedCCBsActive)
+		return;
+	HostAdapter->ProcessCompletedCCBsActive = true;
+	while (HostAdapter->FirstCompletedCCB != NULL) {
+		struct BusLogic_CCB *CCB = HostAdapter->FirstCompletedCCB;
+		struct scsi_cmnd *Command = CCB->Command;
+		HostAdapter->FirstCompletedCCB = CCB->Next;
+		if (HostAdapter->FirstCompletedCCB == NULL)
+			HostAdapter->LastCompletedCCB = NULL;
+		/*
+		   Process the Completed CCB.
+		 */
+		if (CCB->Opcode == BusLogic_BusDeviceReset) {
+			int TargetID = CCB->TargetID;
+			BusLogic_Warning("Bus Device Reset CCB #%ld to Target " "%d Completed\n", HostAdapter, CCB->SerialNumber, TargetID);
+			BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].BusDeviceResetsCompleted);
+			HostAdapter->TargetFlags[TargetID].TaggedQueuingActive = false;
+			HostAdapter->CommandsSinceReset[TargetID] = 0;
+			HostAdapter->LastResetCompleted[TargetID] = jiffies;
+			/*
+			   Place CCB back on the Host Adapter's free list.
+			 */
+			BusLogic_DeallocateCCB(CCB);
+#if 0				/* this needs to be redone different for new EH */
+			/*
+			   Bus Device Reset CCBs have the Command field non-NULL only when a
+			   Bus Device Reset was requested for a Command that did not have a
+			   currently active CCB in the Host Adapter (i.e., a Synchronous
+			   Bus Device Reset), and hence would not have its Completion Routine
+			   called otherwise.
+			 */
+			while (Command != NULL) {
+				struct scsi_cmnd *NextCommand = Command->reset_chain;
+				Command->reset_chain = NULL;
+				Command->result = DID_RESET << 16;
+				Command->scsi_done(Command);
+				Command = NextCommand;
+			}
+#endif
+			/*
+			   Iterate over the CCBs for this Host Adapter performing completion
+			   processing for any CCBs marked as Reset for this Target.
+			 */
+			for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
+				if (CCB->Status == BusLogic_CCB_Reset && CCB->TargetID == TargetID) {
+					Command = CCB->Command;
+					BusLogic_DeallocateCCB(CCB);
+					HostAdapter->ActiveCommands[TargetID]--;
+					Command->result = DID_RESET << 16;
+					Command->scsi_done(Command);
+				}
+			HostAdapter->BusDeviceResetPendingCCB[TargetID] = NULL;
+		} else {
+			/*
+			   Translate the Completion Code, Host Adapter Status, and Target
+			   Device Status into a SCSI Subsystem Result Code.
+			 */
+			switch (CCB->CompletionCode) {
+			case BusLogic_IncomingMailboxFree:
+			case BusLogic_AbortedCommandNotFound:
+			case BusLogic_InvalidCCB:
+				BusLogic_Warning("CCB #%ld to Target %d Impossible State\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
+				break;
+			case BusLogic_CommandCompletedWithoutError:
+				HostAdapter->TargetStatistics[CCB->TargetID]
+				    .CommandsCompleted++;
+				HostAdapter->TargetFlags[CCB->TargetID]
+				    .CommandSuccessfulFlag = true;
+				Command->result = DID_OK << 16;
+				break;
+			case BusLogic_CommandAbortedAtHostRequest:
+				BusLogic_Warning("CCB #%ld to Target %d Aborted\n", HostAdapter, CCB->SerialNumber, CCB->TargetID);
+				BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[CCB->TargetID]
+							       .CommandAbortsCompleted);
+				Command->result = DID_ABORT << 16;
+				break;
+			case BusLogic_CommandCompletedWithError:
+				Command->result = BusLogic_ComputeResultCode(HostAdapter, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
+				if (CCB->HostAdapterStatus != BusLogic_SCSISelectionTimeout) {
+					HostAdapter->TargetStatistics[CCB->TargetID]
+					    .CommandsCompleted++;
+					if (BusLogic_GlobalOptions.TraceErrors) {
+						int i;
+						BusLogic_Notice("CCB #%ld Target %d: Result %X Host "
+								"Adapter Status %02X " "Target Status %02X\n", HostAdapter, CCB->SerialNumber, CCB->TargetID, Command->result, CCB->HostAdapterStatus, CCB->TargetDeviceStatus);
+						BusLogic_Notice("CDB   ", HostAdapter);
+						for (i = 0; i < CCB->CDB_Length; i++)
+							BusLogic_Notice(" %02X", HostAdapter, CCB->CDB[i]);
+						BusLogic_Notice("\n", HostAdapter);
+						BusLogic_Notice("Sense ", HostAdapter);
+						for (i = 0; i < CCB->SenseDataLength; i++)
+							BusLogic_Notice(" %02X", HostAdapter, Command->sense_buffer[i]);
+						BusLogic_Notice("\n", HostAdapter);
+					}
+				}
+				break;
+			}
+			/*
+			   When an INQUIRY command completes normally, save the
+			   CmdQue (Tagged Queuing Supported) and WBus16 (16 Bit
+			   Wide Data Transfers Supported) bits.
+			 */
+			if (CCB->CDB[0] == INQUIRY && CCB->CDB[1] == 0 && CCB->HostAdapterStatus == BusLogic_CommandCompletedNormally) {
+				struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[CCB->TargetID];
+				struct SCSI_Inquiry *InquiryResult = (struct SCSI_Inquiry *) Command->request_buffer;
+				TargetFlags->TargetExists = true;
+				TargetFlags->TaggedQueuingSupported = InquiryResult->CmdQue;
+				TargetFlags->WideTransfersSupported = InquiryResult->WBus16;
+			}
+			/*
+			   Place CCB back on the Host Adapter's free list.
+			 */
+			BusLogic_DeallocateCCB(CCB);
+			/*
+			   Call the SCSI Command Completion Routine.
+			 */
+			Command->scsi_done(Command);
+		}
+	}
+	HostAdapter->ProcessCompletedCCBsActive = false;
+}
+
+
+/*
+  BusLogic_InterruptHandler handles hardware interrupts from BusLogic Host
+  Adapters.
+*/
+
+static irqreturn_t BusLogic_InterruptHandler(int IRQ_Channel, void *DeviceIdentifier, struct pt_regs *InterruptRegisters)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) DeviceIdentifier;
+	unsigned long ProcessorFlags;
+	/*
+	   Acquire exclusive access to Host Adapter.
+	 */
+	spin_lock_irqsave(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
+	/*
+	   Handle Interrupts appropriately for each Host Adapter type.
+	 */
+	if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
+		union BusLogic_InterruptRegister InterruptRegister;
+		/*
+		   Read the Host Adapter Interrupt Register.
+		 */
+		InterruptRegister.All = BusLogic_ReadInterruptRegister(HostAdapter);
+		if (InterruptRegister.ir.InterruptValid) {
+			/*
+			   Acknowledge the interrupt and reset the Host Adapter
+			   Interrupt Register.
+			 */
+			BusLogic_InterruptReset(HostAdapter);
+			/*
+			   Process valid External SCSI Bus Reset and Incoming Mailbox
+			   Loaded Interrupts.  Command Complete Interrupts are noted,
+			   and Outgoing Mailbox Available Interrupts are ignored, as
+			   they are never enabled.
+			 */
+			if (InterruptRegister.ir.ExternalBusReset)
+				HostAdapter->HostAdapterExternalReset = true;
+			else if (InterruptRegister.ir.IncomingMailboxLoaded)
+				BusLogic_ScanIncomingMailboxes(HostAdapter);
+			else if (InterruptRegister.ir.CommandComplete)
+				HostAdapter->HostAdapterCommandCompleted = true;
+		}
+	} else {
+		/*
+		   Check if there is a pending interrupt for this Host Adapter.
+		 */
+		if (FlashPoint_InterruptPending(HostAdapter->CardHandle))
+			switch (FlashPoint_HandleInterrupt(HostAdapter->CardHandle)) {
+			case FlashPoint_NormalInterrupt:
+				break;
+			case FlashPoint_ExternalBusReset:
+				HostAdapter->HostAdapterExternalReset = true;
+				break;
+			case FlashPoint_InternalError:
+				BusLogic_Warning("Internal FlashPoint Error detected" " - Resetting Host Adapter\n", HostAdapter);
+				HostAdapter->HostAdapterInternalError = true;
+				break;
+			}
+	}
+	/*
+	   Process any completed CCBs.
+	 */
+	if (HostAdapter->FirstCompletedCCB != NULL)
+		BusLogic_ProcessCompletedCCBs(HostAdapter);
+	/*
+	   Reset the Host Adapter if requested.
+	 */
+	if (HostAdapter->HostAdapterExternalReset) {
+		BusLogic_Warning("Resetting %s due to External SCSI Bus Reset\n", HostAdapter, HostAdapter->FullModelName);
+		BusLogic_IncrementErrorCounter(&HostAdapter->ExternalHostAdapterResets);
+		BusLogic_ResetHostAdapter(HostAdapter, false);
+		HostAdapter->HostAdapterExternalReset = false;
+	} else if (HostAdapter->HostAdapterInternalError) {
+		BusLogic_Warning("Resetting %s due to Host Adapter Internal Error\n", HostAdapter, HostAdapter->FullModelName);
+		BusLogic_IncrementErrorCounter(&HostAdapter->HostAdapterInternalErrors);
+		BusLogic_ResetHostAdapter(HostAdapter, true);
+		HostAdapter->HostAdapterInternalError = false;
+	}
+	/*
+	   Release exclusive access to Host Adapter.
+	 */
+	spin_unlock_irqrestore(HostAdapter->SCSI_Host->host_lock, ProcessorFlags);
+	return IRQ_HANDLED;
+}
+
+
+/*
+  BusLogic_WriteOutgoingMailbox places CCB and Action Code into an Outgoing
+  Mailbox for execution by Host Adapter.  The Host Adapter's Lock should
+  already have been acquired by the caller.
+*/
+
+static boolean BusLogic_WriteOutgoingMailbox(struct BusLogic_HostAdapter
+					     *HostAdapter, enum BusLogic_ActionCode ActionCode, struct BusLogic_CCB *CCB)
+{
+	struct BusLogic_OutgoingMailbox *NextOutgoingMailbox;
+	NextOutgoingMailbox = HostAdapter->NextOutgoingMailbox;
+	if (NextOutgoingMailbox->ActionCode == BusLogic_OutgoingMailboxFree) {
+		CCB->Status = BusLogic_CCB_Active;
+		/*
+		   The CCB field must be written before the Action Code field since
+		   the Host Adapter is operating asynchronously and the locking code
+		   does not protect against simultaneous access by the Host Adapter.
+		 */
+		NextOutgoingMailbox->CCB = CCB->DMA_Handle;
+		NextOutgoingMailbox->ActionCode = ActionCode;
+		BusLogic_StartMailboxCommand(HostAdapter);
+		if (++NextOutgoingMailbox > HostAdapter->LastOutgoingMailbox)
+			NextOutgoingMailbox = HostAdapter->FirstOutgoingMailbox;
+		HostAdapter->NextOutgoingMailbox = NextOutgoingMailbox;
+		if (ActionCode == BusLogic_MailboxStartCommand) {
+			HostAdapter->ActiveCommands[CCB->TargetID]++;
+			if (CCB->Opcode != BusLogic_BusDeviceReset)
+				HostAdapter->TargetStatistics[CCB->TargetID].CommandsAttempted++;
+		}
+		return true;
+	}
+	return false;
+}
+
+/* Error Handling (EH) support */
+
+static int BusLogic_host_reset(struct scsi_cmnd * SCpnt)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) SCpnt->device->host->hostdata;
+
+	unsigned int id = SCpnt->device->id;
+	struct BusLogic_TargetStatistics *stats = &HostAdapter->TargetStatistics[id];
+	BusLogic_IncrementErrorCounter(&stats->HostAdapterResetsRequested);
+
+	return BusLogic_ResetHostAdapter(HostAdapter, false);
+}
+
+/*
+  BusLogic_QueueCommand creates a CCB for Command and places it into an
+  Outgoing Mailbox for execution by the associated Host Adapter.
+*/
+
+static int BusLogic_QueueCommand(struct scsi_cmnd *Command, void (*CompletionRoutine) (struct scsi_cmnd *))
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
+	struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[Command->device->id];
+	struct BusLogic_TargetStatistics *TargetStatistics = HostAdapter->TargetStatistics;
+	unsigned char *CDB = Command->cmnd;
+	int CDB_Length = Command->cmd_len;
+	int TargetID = Command->device->id;
+	int LogicalUnit = Command->device->lun;
+	void *BufferPointer = Command->request_buffer;
+	int BufferLength = Command->request_bufflen;
+	int SegmentCount = Command->use_sg;
+	struct BusLogic_CCB *CCB;
+	/*
+	   SCSI REQUEST_SENSE commands will be executed automatically by the Host
+	   Adapter for any errors, so they should not be executed explicitly unless
+	   the Sense Data is zero indicating that no error occurred.
+	 */
+	if (CDB[0] == REQUEST_SENSE && Command->sense_buffer[0] != 0) {
+		Command->result = DID_OK << 16;
+		CompletionRoutine(Command);
+		return 0;
+	}
+	/*
+	   Allocate a CCB from the Host Adapter's free list.  In the unlikely event
+	   that there are none available and memory allocation fails, wait 1 second
+	   and try again.  If that fails, the Host Adapter is probably hung so signal
+	   an error as a Host Adapter Hard Reset should be initiated soon.
+	 */
+	CCB = BusLogic_AllocateCCB(HostAdapter);
+	if (CCB == NULL) {
+		spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
+		BusLogic_Delay(1);
+		spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
+		CCB = BusLogic_AllocateCCB(HostAdapter);
+		if (CCB == NULL) {
+			Command->result = DID_ERROR << 16;
+			CompletionRoutine(Command);
+			return 0;
+		}
+	}
+	/*
+	   Initialize the fields in the BusLogic Command Control Block (CCB).
+	 */
+	if (SegmentCount == 0 && BufferLength != 0) {
+		CCB->Opcode = BusLogic_InitiatorCCB;
+		CCB->DataLength = BufferLength;
+		CCB->DataPointer = pci_map_single(HostAdapter->PCI_Device,
+				BufferPointer, BufferLength,
+				Command->sc_data_direction);
+	} else if (SegmentCount != 0) {
+		struct scatterlist *ScatterList = (struct scatterlist *) BufferPointer;
+		int Segment, Count;
+
+		Count = pci_map_sg(HostAdapter->PCI_Device, ScatterList, SegmentCount,
+				Command->sc_data_direction);
+		CCB->Opcode = BusLogic_InitiatorCCB_ScatterGather;
+		CCB->DataLength = Count * sizeof(struct BusLogic_ScatterGatherSegment);
+		if (BusLogic_MultiMasterHostAdapterP(HostAdapter))
+			CCB->DataPointer = (unsigned int) CCB->DMA_Handle + ((unsigned long) &CCB->ScatterGatherList - (unsigned long) CCB);
+		else
+			CCB->DataPointer = Virtual_to_32Bit_Virtual(CCB->ScatterGatherList);
+		for (Segment = 0; Segment < Count; Segment++) {
+			CCB->ScatterGatherList[Segment].SegmentByteCount = sg_dma_len(ScatterList + Segment);
+			CCB->ScatterGatherList[Segment].SegmentDataPointer = sg_dma_address(ScatterList + Segment);
+		}
+	} else {
+		CCB->Opcode = BusLogic_InitiatorCCB;
+		CCB->DataLength = BufferLength;
+		CCB->DataPointer = 0;
+	}
+	switch (CDB[0]) {
+	case READ_6:
+	case READ_10:
+		CCB->DataDirection = BusLogic_DataInLengthChecked;
+		TargetStatistics[TargetID].ReadCommands++;
+		BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesRead, BufferLength);
+		BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].ReadCommandSizeBuckets, BufferLength);
+		break;
+	case WRITE_6:
+	case WRITE_10:
+		CCB->DataDirection = BusLogic_DataOutLengthChecked;
+		TargetStatistics[TargetID].WriteCommands++;
+		BusLogic_IncrementByteCounter(&TargetStatistics[TargetID].TotalBytesWritten, BufferLength);
+		BusLogic_IncrementSizeBucket(TargetStatistics[TargetID].WriteCommandSizeBuckets, BufferLength);
+		break;
+	default:
+		CCB->DataDirection = BusLogic_UncheckedDataTransfer;
+		break;
+	}
+	CCB->CDB_Length = CDB_Length;
+	CCB->HostAdapterStatus = 0;
+	CCB->TargetDeviceStatus = 0;
+	CCB->TargetID = TargetID;
+	CCB->LogicalUnit = LogicalUnit;
+	CCB->TagEnable = false;
+	CCB->LegacyTagEnable = false;
+	/*
+	   BusLogic recommends that after a Reset the first couple of commands that
+	   are sent to a Target Device be sent in a non Tagged Queue fashion so that
+	   the Host Adapter and Target Device can establish Synchronous and Wide
+	   Transfer before Queue Tag messages can interfere with the Synchronous and
+	   Wide Negotiation messages.  By waiting to enable Tagged Queuing until after
+	   the first BusLogic_MaxTaggedQueueDepth commands have been queued, it is
+	   assured that after a Reset any pending commands are requeued before Tagged
+	   Queuing is enabled and that the Tagged Queuing message will not occur while
+	   the partition table is being printed.  In addition, some devices do not
+	   properly handle the transition from non-tagged to tagged commands, so it is
+	   necessary to wait until there are no pending commands for a target device
+	   before queuing tagged commands.
+	 */
+	if (HostAdapter->CommandsSinceReset[TargetID]++ >=
+	    BusLogic_MaxTaggedQueueDepth && !TargetFlags->TaggedQueuingActive && HostAdapter->ActiveCommands[TargetID] == 0 && TargetFlags->TaggedQueuingSupported && (HostAdapter->TaggedQueuingPermitted & (1 << TargetID))) {
+		TargetFlags->TaggedQueuingActive = true;
+		BusLogic_Notice("Tagged Queuing now active for Target %d\n", HostAdapter, TargetID);
+	}
+	if (TargetFlags->TaggedQueuingActive) {
+		enum BusLogic_QueueTag QueueTag = BusLogic_SimpleQueueTag;
+		/*
+		   When using Tagged Queuing with Simple Queue Tags, it appears that disk
+		   drive controllers do not guarantee that a queued command will not
+		   remain in a disconnected state indefinitely if commands that read or
+		   write nearer the head position continue to arrive without interruption.
+		   Therefore, for each Target Device this driver keeps track of the last
+		   time either the queue was empty or an Ordered Queue Tag was issued.  If
+		   more than 4 seconds (one fifth of the 20 second disk timeout) have
+		   elapsed since this last sequence point, this command will be issued
+		   with an Ordered Queue Tag rather than a Simple Queue Tag, which forces
+		   the Target Device to complete all previously queued commands before
+		   this command may be executed.
+		 */
+		if (HostAdapter->ActiveCommands[TargetID] == 0)
+			HostAdapter->LastSequencePoint[TargetID] = jiffies;
+		else if (jiffies - HostAdapter->LastSequencePoint[TargetID] > 4 * HZ) {
+			HostAdapter->LastSequencePoint[TargetID] = jiffies;
+			QueueTag = BusLogic_OrderedQueueTag;
+		}
+		if (HostAdapter->ExtendedLUNSupport) {
+			CCB->TagEnable = true;
+			CCB->QueueTag = QueueTag;
+		} else {
+			CCB->LegacyTagEnable = true;
+			CCB->LegacyQueueTag = QueueTag;
+		}
+	}
+	memcpy(CCB->CDB, CDB, CDB_Length);
+	CCB->SenseDataLength = sizeof(Command->sense_buffer);
+	CCB->SenseDataPointer = pci_map_single(HostAdapter->PCI_Device, Command->sense_buffer, CCB->SenseDataLength, PCI_DMA_FROMDEVICE);
+	CCB->Command = Command;
+	Command->scsi_done = CompletionRoutine;
+	if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
+		/*
+		   Place the CCB in an Outgoing Mailbox.  The higher levels of the SCSI
+		   Subsystem should not attempt to queue more commands than can be placed
+		   in Outgoing Mailboxes, so there should always be one free.  In the
+		   unlikely event that there are none available, wait 1 second and try
+		   again.  If that fails, the Host Adapter is probably hung so signal an
+		   error as a Host Adapter Hard Reset should be initiated soon.
+		 */
+		if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
+			spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
+			BusLogic_Warning("Unable to write Outgoing Mailbox - " "Pausing for 1 second\n", HostAdapter);
+			BusLogic_Delay(1);
+			spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
+			if (!BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxStartCommand, CCB)) {
+				BusLogic_Warning("Still unable to write Outgoing Mailbox - " "Host Adapter Dead?\n", HostAdapter);
+				BusLogic_DeallocateCCB(CCB);
+				Command->result = DID_ERROR << 16;
+				Command->scsi_done(Command);
+			}
+		}
+	} else {
+		/*
+		   Call the FlashPoint SCCB Manager to start execution of the CCB.
+		 */
+		CCB->Status = BusLogic_CCB_Active;
+		HostAdapter->ActiveCommands[TargetID]++;
+		TargetStatistics[TargetID].CommandsAttempted++;
+		FlashPoint_StartCCB(HostAdapter->CardHandle, CCB);
+		/*
+		   The Command may have already completed and BusLogic_QueueCompletedCCB
+		   been called, or it may still be pending.
+		 */
+		if (CCB->Status == BusLogic_CCB_Completed)
+			BusLogic_ProcessCompletedCCBs(HostAdapter);
+	}
+	return 0;
+}
+
+
+/*
+  BusLogic_AbortCommand aborts Command if possible.
+*/
+
+static int BusLogic_AbortCommand(struct scsi_cmnd *Command)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) Command->device->host->hostdata;
+
+	int TargetID = Command->device->id;
+	struct BusLogic_CCB *CCB;
+	BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsRequested);
+	/*
+	   If this Command has already completed, then no Abort is necessary.
+	 */
+	if (Command->serial_number != Command->serial_number_at_timeout) {
+		BusLogic_Warning("Unable to Abort Command to Target %d - " "Already Completed\n", HostAdapter, TargetID);
+		return SUCCESS;
+	}
+	/*
+	   Attempt to find an Active CCB for this Command.  If no Active CCB for this
+	   Command is found, then no Abort is necessary.
+	 */
+	for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
+		if (CCB->Command == Command)
+			break;
+	if (CCB == NULL) {
+		BusLogic_Warning("Unable to Abort Command to Target %d - " "No CCB Found\n", HostAdapter, TargetID);
+		return SUCCESS;
+	} else if (CCB->Status == BusLogic_CCB_Completed) {
+		BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Completed\n", HostAdapter, TargetID);
+		return SUCCESS;
+	} else if (CCB->Status == BusLogic_CCB_Reset) {
+		BusLogic_Warning("Unable to Abort Command to Target %d - " "CCB Reset\n", HostAdapter, TargetID);
+		return SUCCESS;
+	}
+	if (BusLogic_MultiMasterHostAdapterP(HostAdapter)) {
+		/*
+		   Attempt to Abort this CCB.  MultiMaster Firmware versions prior to 5.xx
+		   do not generate Abort Tag messages, but only generate the non-tagged
+		   Abort message.  Since non-tagged commands are not sent by the Host
+		   Adapter until the queue of outstanding tagged commands has completed,
+		   and the Abort message is treated as a non-tagged command, it is
+		   effectively impossible to abort commands when Tagged Queuing is active.
+		   Firmware version 5.xx does generate Abort Tag messages, so it is
+		   possible to abort commands when Tagged Queuing is active.
+		 */
+		if (HostAdapter->TargetFlags[TargetID].TaggedQueuingActive && HostAdapter->FirmwareVersion[0] < '5') {
+			BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "Abort Tag Not Supported\n", HostAdapter, CCB->SerialNumber, TargetID);
+			return FAILURE;
+		} else if (BusLogic_WriteOutgoingMailbox(HostAdapter, BusLogic_MailboxAbortCommand, CCB)) {
+			BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
+			BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
+			return SUCCESS;
+		} else {
+			BusLogic_Warning("Unable to Abort CCB #%ld to Target %d - " "No Outgoing Mailboxes\n", HostAdapter, CCB->SerialNumber, TargetID);
+			return FAILURE;
+		}
+	} else {
+		/*
+		   Call the FlashPoint SCCB Manager to abort execution of the CCB.
+		 */
+		BusLogic_Warning("Aborting CCB #%ld to Target %d\n", HostAdapter, CCB->SerialNumber, TargetID);
+		BusLogic_IncrementErrorCounter(&HostAdapter->TargetStatistics[TargetID].CommandAbortsAttempted);
+		FlashPoint_AbortCCB(HostAdapter->CardHandle, CCB);
+		/*
+		   The Abort may have already been completed and
+		   BusLogic_QueueCompletedCCB been called, or it
+		   may still be pending.
+		 */
+		if (CCB->Status == BusLogic_CCB_Completed) {
+			BusLogic_ProcessCompletedCCBs(HostAdapter);
+		}
+		return SUCCESS;
+	}
+	return SUCCESS;
+}
+
+/*
+  BusLogic_ResetHostAdapter resets Host Adapter if possible, marking all
+  currently executing SCSI Commands as having been Reset.
+*/
+
+static int BusLogic_ResetHostAdapter(struct BusLogic_HostAdapter *HostAdapter, boolean HardReset)
+{
+	struct BusLogic_CCB *CCB;
+	int TargetID;
+
+	/*
+	 * Attempt to Reset and Reinitialize the Host Adapter.
+	 */
+
+	if (!(BusLogic_HardwareResetHostAdapter(HostAdapter, HardReset) && BusLogic_InitializeHostAdapter(HostAdapter))) {
+		BusLogic_Error("Resetting %s Failed\n", HostAdapter, HostAdapter->FullModelName);
+		return FAILURE;
+	}
+
+	/*
+	 * Deallocate all currently executing CCBs.
+	 */
+
+	for (CCB = HostAdapter->All_CCBs; CCB != NULL; CCB = CCB->NextAll)
+		if (CCB->Status == BusLogic_CCB_Active)
+			BusLogic_DeallocateCCB(CCB);
+	/*
+	 * Wait a few seconds between the Host Adapter Hard Reset which
+	 * initiates a SCSI Bus Reset and issuing any SCSI Commands.  Some
+	 * SCSI devices get confused if they receive SCSI Commands too soon
+	 * after a SCSI Bus Reset.
+	 */
+
+	if (HardReset) {
+		spin_unlock_irq(HostAdapter->SCSI_Host->host_lock);
+		BusLogic_Delay(HostAdapter->BusSettleTime);
+		spin_lock_irq(HostAdapter->SCSI_Host->host_lock);
+	}
+
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		HostAdapter->LastResetAttempted[TargetID] = jiffies;
+		HostAdapter->LastResetCompleted[TargetID] = jiffies;
+	}
+	return SUCCESS;
+}
+
+/*
+  BusLogic_BIOSDiskParameters returns the Heads/Sectors/Cylinders BIOS Disk
+  Parameters for Disk.  The default disk geometry is 64 heads, 32 sectors, and
+  the appropriate number of cylinders so as not to exceed drive capacity.  In
+  order for disks equal to or larger than 1 GB to be addressable by the BIOS
+  without exceeding the BIOS limitation of 1024 cylinders, Extended Translation
+  may be enabled in AutoSCSI on FlashPoint Host Adapters and on "W" and "C"
+  series MultiMaster Host Adapters, or by a dip switch setting on "S" and "A"
+  series MultiMaster Host Adapters.  With Extended Translation enabled, drives
+  between 1 GB inclusive and 2 GB exclusive are given a disk geometry of 128
+  heads and 32 sectors, and drives above 2 GB inclusive are given a disk
+  geometry of 255 heads and 63 sectors.  However, if the BIOS detects that the
+  Extended Translation setting does not match the geometry in the partition
+  table, then the translation inferred from the partition table will be used by
+  the BIOS, and a warning may be displayed.
+*/
+
+static int BusLogic_BIOSDiskParameters(struct scsi_device *sdev, struct block_device *Device, sector_t capacity, int *Parameters)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) sdev->host->hostdata;
+	struct BIOS_DiskParameters *DiskParameters = (struct BIOS_DiskParameters *) Parameters;
+	unsigned char *buf;
+	if (HostAdapter->ExtendedTranslationEnabled && capacity >= 2 * 1024 * 1024 /* 1 GB in 512 byte sectors */ ) {
+		if (capacity >= 4 * 1024 * 1024 /* 2 GB in 512 byte sectors */ ) {
+			DiskParameters->Heads = 255;
+			DiskParameters->Sectors = 63;
+		} else {
+			DiskParameters->Heads = 128;
+			DiskParameters->Sectors = 32;
+		}
+	} else {
+		DiskParameters->Heads = 64;
+		DiskParameters->Sectors = 32;
+	}
+	DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
+	buf = scsi_bios_ptable(Device);
+	if (buf == NULL)
+		return 0;
+	/*
+	   If the boot sector partition table flag is valid, search for a partition
+	   table entry whose end_head matches one of the standard BusLogic geometry
+	   translations (64/32, 128/32, or 255/63).
+	 */
+	if (*(unsigned short *) (buf + 64) == 0xAA55) {
+		struct partition *FirstPartitionEntry = (struct partition *) buf;
+		struct partition *PartitionEntry = FirstPartitionEntry;
+		int SavedCylinders = DiskParameters->Cylinders, PartitionNumber;
+		unsigned char PartitionEntryEndHead = 0, PartitionEntryEndSector = 0;
+		for (PartitionNumber = 0; PartitionNumber < 4; PartitionNumber++) {
+			PartitionEntryEndHead = PartitionEntry->end_head;
+			PartitionEntryEndSector = PartitionEntry->end_sector & 0x3F;
+			if (PartitionEntryEndHead == 64 - 1) {
+				DiskParameters->Heads = 64;
+				DiskParameters->Sectors = 32;
+				break;
+			} else if (PartitionEntryEndHead == 128 - 1) {
+				DiskParameters->Heads = 128;
+				DiskParameters->Sectors = 32;
+				break;
+			} else if (PartitionEntryEndHead == 255 - 1) {
+				DiskParameters->Heads = 255;
+				DiskParameters->Sectors = 63;
+				break;
+			}
+			PartitionEntry++;
+		}
+		if (PartitionNumber == 4) {
+			PartitionEntryEndHead = FirstPartitionEntry->end_head;
+			PartitionEntryEndSector = FirstPartitionEntry->end_sector & 0x3F;
+		}
+		DiskParameters->Cylinders = (unsigned long) capacity / (DiskParameters->Heads * DiskParameters->Sectors);
+		if (PartitionNumber < 4 && PartitionEntryEndSector == DiskParameters->Sectors) {
+			if (DiskParameters->Cylinders != SavedCylinders)
+				BusLogic_Warning("Adopting Geometry %d/%d from Partition Table\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
+		} else if (PartitionEntryEndHead > 0 || PartitionEntryEndSector > 0) {
+			BusLogic_Warning("Warning: Partition Table appears to " "have Geometry %d/%d which is\n", HostAdapter, PartitionEntryEndHead + 1, PartitionEntryEndSector);
+			BusLogic_Warning("not compatible with current BusLogic " "Host Adapter Geometry %d/%d\n", HostAdapter, DiskParameters->Heads, DiskParameters->Sectors);
+		}
+	}
+	kfree(buf);
+	return 0;
+}
+
+
+/*
+  BugLogic_ProcDirectoryInfo implements /proc/scsi/BusLogic/<N>.
+*/
+
+static int BusLogic_ProcDirectoryInfo(struct Scsi_Host *shost, char *ProcBuffer, char **StartPointer, off_t Offset, int BytesAvailable, int WriteFlag)
+{
+	struct BusLogic_HostAdapter *HostAdapter = (struct BusLogic_HostAdapter *) shost->hostdata;
+	struct BusLogic_TargetStatistics *TargetStatistics;
+	int TargetID, Length;
+	char *Buffer;
+
+	TargetStatistics = HostAdapter->TargetStatistics;
+	if (WriteFlag) {
+		HostAdapter->ExternalHostAdapterResets = 0;
+		HostAdapter->HostAdapterInternalErrors = 0;
+		memset(TargetStatistics, 0, BusLogic_MaxTargetDevices * sizeof(struct BusLogic_TargetStatistics));
+		return 0;
+	}
+	Buffer = HostAdapter->MessageBuffer;
+	Length = HostAdapter->MessageBufferLength;
+	Length += sprintf(&Buffer[Length], "\n\
+Current Driver Queue Depth:	%d\n\
+Currently Allocated CCBs:	%d\n", HostAdapter->DriverQueueDepth, HostAdapter->AllocatedCCBs);
+	Length += sprintf(&Buffer[Length], "\n\n\
+			   DATA TRANSFER STATISTICS\n\
+\n\
+Target	Tagged Queuing	Queue Depth  Active  Attempted	Completed\n\
+======	==============	===========  ======  =========	=========\n");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
+		if (!TargetFlags->TargetExists)
+			continue;
+		Length += sprintf(&Buffer[Length], "  %2d	%s", TargetID, (TargetFlags->TaggedQueuingSupported ? (TargetFlags->TaggedQueuingActive ? "    Active" : (HostAdapter->TaggedQueuingPermitted & (1 << TargetID)
+																				    ? "  Permitted" : "   Disabled"))
+									  : "Not Supported"));
+		Length += sprintf(&Buffer[Length],
+				  "	    %3d       %3u    %9u	%9u\n", HostAdapter->QueueDepth[TargetID], HostAdapter->ActiveCommands[TargetID], TargetStatistics[TargetID].CommandsAttempted, TargetStatistics[TargetID].CommandsCompleted);
+	}
+	Length += sprintf(&Buffer[Length], "\n\
+Target  Read Commands  Write Commands   Total Bytes Read    Total Bytes Written\n\
+======  =============  ==============  ===================  ===================\n");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
+		if (!TargetFlags->TargetExists)
+			continue;
+		Length += sprintf(&Buffer[Length], "  %2d	  %9u	 %9u", TargetID, TargetStatistics[TargetID].ReadCommands, TargetStatistics[TargetID].WriteCommands);
+		if (TargetStatistics[TargetID].TotalBytesRead.Billions > 0)
+			Length += sprintf(&Buffer[Length], "     %9u%09u", TargetStatistics[TargetID].TotalBytesRead.Billions, TargetStatistics[TargetID].TotalBytesRead.Units);
+		else
+			Length += sprintf(&Buffer[Length], "		%9u", TargetStatistics[TargetID].TotalBytesRead.Units);
+		if (TargetStatistics[TargetID].TotalBytesWritten.Billions > 0)
+			Length += sprintf(&Buffer[Length], "   %9u%09u\n", TargetStatistics[TargetID].TotalBytesWritten.Billions, TargetStatistics[TargetID].TotalBytesWritten.Units);
+		else
+			Length += sprintf(&Buffer[Length], "	     %9u\n", TargetStatistics[TargetID].TotalBytesWritten.Units);
+	}
+	Length += sprintf(&Buffer[Length], "\n\
+Target  Command    0-1KB      1-2KB      2-4KB      4-8KB     8-16KB\n\
+======  =======  =========  =========  =========  =========  =========\n");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
+		if (!TargetFlags->TargetExists)
+			continue;
+		Length +=
+		    sprintf(&Buffer[Length],
+			    "  %2d	 Read	 %9u  %9u  %9u  %9u  %9u\n", TargetID,
+			    TargetStatistics[TargetID].ReadCommandSizeBuckets[0],
+			    TargetStatistics[TargetID].ReadCommandSizeBuckets[1], TargetStatistics[TargetID].ReadCommandSizeBuckets[2], TargetStatistics[TargetID].ReadCommandSizeBuckets[3], TargetStatistics[TargetID].ReadCommandSizeBuckets[4]);
+		Length +=
+		    sprintf(&Buffer[Length],
+			    "  %2d	 Write	 %9u  %9u  %9u  %9u  %9u\n", TargetID,
+			    TargetStatistics[TargetID].WriteCommandSizeBuckets[0],
+			    TargetStatistics[TargetID].WriteCommandSizeBuckets[1], TargetStatistics[TargetID].WriteCommandSizeBuckets[2], TargetStatistics[TargetID].WriteCommandSizeBuckets[3], TargetStatistics[TargetID].WriteCommandSizeBuckets[4]);
+	}
+	Length += sprintf(&Buffer[Length], "\n\
+Target  Command   16-32KB    32-64KB   64-128KB   128-256KB   256KB+\n\
+======  =======  =========  =========  =========  =========  =========\n");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
+		if (!TargetFlags->TargetExists)
+			continue;
+		Length +=
+		    sprintf(&Buffer[Length],
+			    "  %2d	 Read	 %9u  %9u  %9u  %9u  %9u\n", TargetID,
+			    TargetStatistics[TargetID].ReadCommandSizeBuckets[5],
+			    TargetStatistics[TargetID].ReadCommandSizeBuckets[6], TargetStatistics[TargetID].ReadCommandSizeBuckets[7], TargetStatistics[TargetID].ReadCommandSizeBuckets[8], TargetStatistics[TargetID].ReadCommandSizeBuckets[9]);
+		Length +=
+		    sprintf(&Buffer[Length],
+			    "  %2d	 Write	 %9u  %9u  %9u  %9u  %9u\n", TargetID,
+			    TargetStatistics[TargetID].WriteCommandSizeBuckets[5],
+			    TargetStatistics[TargetID].WriteCommandSizeBuckets[6], TargetStatistics[TargetID].WriteCommandSizeBuckets[7], TargetStatistics[TargetID].WriteCommandSizeBuckets[8], TargetStatistics[TargetID].WriteCommandSizeBuckets[9]);
+	}
+	Length += sprintf(&Buffer[Length], "\n\n\
+			   ERROR RECOVERY STATISTICS\n\
+\n\
+	  Command Aborts      Bus Device Resets	  Host Adapter Resets\n\
+Target	Requested Completed  Requested Completed  Requested Completed\n\
+  ID	\\\\\\\\ Attempted ////  \\\\\\\\ Attempted ////  \\\\\\\\ Attempted ////\n\
+======	 ===== ===== =====    ===== ===== =====	   ===== ===== =====\n");
+	for (TargetID = 0; TargetID < HostAdapter->MaxTargetDevices; TargetID++) {
+		struct BusLogic_TargetFlags *TargetFlags = &HostAdapter->TargetFlags[TargetID];
+		if (!TargetFlags->TargetExists)
+			continue;
+		Length += sprintf(&Buffer[Length], "\
+  %2d	 %5d %5d %5d    %5d %5d %5d	   %5d %5d %5d\n", TargetID, TargetStatistics[TargetID].CommandAbortsRequested, TargetStatistics[TargetID].CommandAbortsAttempted, TargetStatistics[TargetID].CommandAbortsCompleted, TargetStatistics[TargetID].BusDeviceResetsRequested, TargetStatistics[TargetID].BusDeviceResetsAttempted, TargetStatistics[TargetID].BusDeviceResetsCompleted, TargetStatistics[TargetID].HostAdapterResetsRequested, TargetStatistics[TargetID].HostAdapterResetsAttempted, TargetStatistics[TargetID].HostAdapterResetsCompleted);
+	}
+	Length += sprintf(&Buffer[Length], "\nExternal Host Adapter Resets: %d\n", HostAdapter->ExternalHostAdapterResets);
+	Length += sprintf(&Buffer[Length], "Host Adapter Internal Errors: %d\n", HostAdapter->HostAdapterInternalErrors);
+	if (Length >= BusLogic_MessageBufferSize)
+		BusLogic_Error("Message Buffer length %d exceeds size %d\n", HostAdapter, Length, BusLogic_MessageBufferSize);
+	if ((Length -= Offset) <= 0)
+		return 0;
+	if (Length >= BytesAvailable)
+		Length = BytesAvailable;
+	memcpy(ProcBuffer, HostAdapter->MessageBuffer + Offset, Length);
+	*StartPointer = ProcBuffer;
+	return Length;
+}
+
+
+/*
+  BusLogic_Message prints Driver Messages.
+*/
+
+static void BusLogic_Message(enum BusLogic_MessageLevel MessageLevel, char *Format, struct BusLogic_HostAdapter *HostAdapter, ...)
+{
+	static char Buffer[BusLogic_LineBufferSize];
+	static boolean BeginningOfLine = true;
+	va_list Arguments;
+	int Length = 0;
+	va_start(Arguments, HostAdapter);
+	Length = vsprintf(Buffer, Format, Arguments);
+	va_end(Arguments);
+	if (MessageLevel == BusLogic_AnnounceLevel) {
+		static int AnnouncementLines = 0;
+		strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
+		HostAdapter->MessageBufferLength += Length;
+		if (++AnnouncementLines <= 2)
+			printk("%sscsi: %s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
+	} else if (MessageLevel == BusLogic_InfoLevel) {
+		strcpy(&HostAdapter->MessageBuffer[HostAdapter->MessageBufferLength], Buffer);
+		HostAdapter->MessageBufferLength += Length;
+		if (BeginningOfLine) {
+			if (Buffer[0] != '\n' || Length > 1)
+				printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
+		} else
+			printk("%s", Buffer);
+	} else {
+		if (BeginningOfLine) {
+			if (HostAdapter != NULL && HostAdapter->HostAdapterInitialized)
+				printk("%sscsi%d: %s", BusLogic_MessageLevelMap[MessageLevel], HostAdapter->HostNumber, Buffer);
+			else
+				printk("%s%s", BusLogic_MessageLevelMap[MessageLevel], Buffer);
+		} else
+			printk("%s", Buffer);
+	}
+	BeginningOfLine = (Buffer[Length - 1] == '\n');
+}
+
+
+/*
+  BusLogic_ParseKeyword parses an individual option keyword.  It returns true
+  and updates the pointer if the keyword is recognized and false otherwise.
+*/
+
+static boolean __init BusLogic_ParseKeyword(char **StringPointer, char *Keyword)
+{
+	char *Pointer = *StringPointer;
+	while (*Keyword != '\0') {
+		char StringChar = *Pointer++;
+		char KeywordChar = *Keyword++;
+		if (StringChar >= 'A' && StringChar <= 'Z')
+			StringChar += 'a' - 'Z';
+		if (KeywordChar >= 'A' && KeywordChar <= 'Z')
+			KeywordChar += 'a' - 'Z';
+		if (StringChar != KeywordChar)
+			return false;
+	}
+	*StringPointer = Pointer;
+	return true;
+}
+
+
+/*
+  BusLogic_ParseDriverOptions handles processing of BusLogic Driver Options
+  specifications.
+
+  BusLogic Driver Options may be specified either via the Linux Kernel Command
+  Line or via the Loadable Kernel Module Installation Facility.  Driver Options
+  for multiple host adapters may be specified either by separating the option
+  strings by a semicolon, or by specifying multiple "BusLogic=" strings on the
+  command line.  Individual option specifications for a single host adapter are
+  separated by commas.  The Probing and Debugging Options apply to all host
+  adapters whereas the remaining options apply individually only to the
+  selected host adapter.
+
+  The BusLogic Driver Probing Options are described in
+  <file:Documentation/scsi/BusLogic.txt>.
+*/
+
+static int __init BusLogic_ParseDriverOptions(char *OptionsString)
+{
+	while (true) {
+		struct BusLogic_DriverOptions *DriverOptions = &BusLogic_DriverOptions[BusLogic_DriverOptionsCount++];
+		int TargetID;
+		memset(DriverOptions, 0, sizeof(struct BusLogic_DriverOptions));
+		while (*OptionsString != '\0' && *OptionsString != ';') {
+			/* Probing Options. */
+			if (BusLogic_ParseKeyword(&OptionsString, "IO:")) {
+				unsigned long IO_Address = simple_strtoul(OptionsString, &OptionsString, 0);
+				BusLogic_ProbeOptions.LimitedProbeISA = true;
+				switch (IO_Address) {
+				case 0x330:
+					BusLogic_ProbeOptions.Probe330 = true;
+					break;
+				case 0x334:
+					BusLogic_ProbeOptions.Probe334 = true;
+					break;
+				case 0x230:
+					BusLogic_ProbeOptions.Probe230 = true;
+					break;
+				case 0x234:
+					BusLogic_ProbeOptions.Probe234 = true;
+					break;
+				case 0x130:
+					BusLogic_ProbeOptions.Probe130 = true;
+					break;
+				case 0x134:
+					BusLogic_ProbeOptions.Probe134 = true;
+					break;
+				default:
+					BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid I/O Address 0x%X)\n", NULL, IO_Address);
+					return 0;
+				}
+			} else if (BusLogic_ParseKeyword(&OptionsString, "NoProbeISA"))
+				BusLogic_ProbeOptions.NoProbeISA = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "NoProbePCI"))
+				BusLogic_ProbeOptions.NoProbePCI = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "NoProbe"))
+				BusLogic_ProbeOptions.NoProbe = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "NoSortPCI"))
+				BusLogic_ProbeOptions.NoSortPCI = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "MultiMasterFirst"))
+				BusLogic_ProbeOptions.MultiMasterFirst = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "FlashPointFirst"))
+				BusLogic_ProbeOptions.FlashPointFirst = true;
+			/* Tagged Queuing Options. */
+			else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:[") || BusLogic_ParseKeyword(&OptionsString, "QD:[")) {
+				for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++) {
+					unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
+					if (QueueDepth > BusLogic_MaxTaggedQueueDepth) {
+						BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
+						return 0;
+					}
+					DriverOptions->QueueDepth[TargetID] = QueueDepth;
+					if (*OptionsString == ',')
+						OptionsString++;
+					else if (*OptionsString == ']')
+						break;
+					else {
+						BusLogic_Error("BusLogic: Invalid Driver Options " "(',' or ']' expected at '%s')\n", NULL, OptionsString);
+						return 0;
+					}
+				}
+				if (*OptionsString != ']') {
+					BusLogic_Error("BusLogic: Invalid Driver Options " "(']' expected at '%s')\n", NULL, OptionsString);
+					return 0;
+				} else
+					OptionsString++;
+			} else if (BusLogic_ParseKeyword(&OptionsString, "QueueDepth:") || BusLogic_ParseKeyword(&OptionsString, "QD:")) {
+				unsigned short QueueDepth = simple_strtoul(OptionsString, &OptionsString, 0);
+				if (QueueDepth == 0 || QueueDepth > BusLogic_MaxTaggedQueueDepth) {
+					BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Queue Depth %d)\n", NULL, QueueDepth);
+					return 0;
+				}
+				DriverOptions->CommonQueueDepth = QueueDepth;
+				for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
+					DriverOptions->QueueDepth[TargetID] = QueueDepth;
+			} else if (BusLogic_ParseKeyword(&OptionsString, "TaggedQueuing:") || BusLogic_ParseKeyword(&OptionsString, "TQ:")) {
+				if (BusLogic_ParseKeyword(&OptionsString, "Default")) {
+					DriverOptions->TaggedQueuingPermitted = 0x0000;
+					DriverOptions->TaggedQueuingPermittedMask = 0x0000;
+				} else if (BusLogic_ParseKeyword(&OptionsString, "Enable")) {
+					DriverOptions->TaggedQueuingPermitted = 0xFFFF;
+					DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
+				} else if (BusLogic_ParseKeyword(&OptionsString, "Disable")) {
+					DriverOptions->TaggedQueuingPermitted = 0x0000;
+					DriverOptions->TaggedQueuingPermittedMask = 0xFFFF;
+				} else {
+					unsigned short TargetBit;
+					for (TargetID = 0, TargetBit = 1; TargetID < BusLogic_MaxTargetDevices; TargetID++, TargetBit <<= 1)
+						switch (*OptionsString++) {
+						case 'Y':
+							DriverOptions->TaggedQueuingPermitted |= TargetBit;
+							DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
+							break;
+						case 'N':
+							DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
+							DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
+							break;
+						case 'X':
+							break;
+						default:
+							OptionsString--;
+							TargetID = BusLogic_MaxTargetDevices;
+							break;
+						}
+				}
+			}
+			/* Miscellaneous Options. */
+			else if (BusLogic_ParseKeyword(&OptionsString, "BusSettleTime:") || BusLogic_ParseKeyword(&OptionsString, "BST:")) {
+				unsigned short BusSettleTime = simple_strtoul(OptionsString, &OptionsString, 0);
+				if (BusSettleTime > 5 * 60) {
+					BusLogic_Error("BusLogic: Invalid Driver Options " "(invalid Bus Settle Time %d)\n", NULL, BusSettleTime);
+					return 0;
+				}
+				DriverOptions->BusSettleTime = BusSettleTime;
+			} else if (BusLogic_ParseKeyword(&OptionsString, "InhibitTargetInquiry"))
+				DriverOptions->LocalOptions.InhibitTargetInquiry = true;
+			/* Debugging Options. */
+			else if (BusLogic_ParseKeyword(&OptionsString, "TraceProbe"))
+				BusLogic_GlobalOptions.TraceProbe = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "TraceHardwareReset"))
+				BusLogic_GlobalOptions.TraceHardwareReset = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "TraceConfiguration"))
+				BusLogic_GlobalOptions.TraceConfiguration = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "TraceErrors"))
+				BusLogic_GlobalOptions.TraceErrors = true;
+			else if (BusLogic_ParseKeyword(&OptionsString, "Debug")) {
+				BusLogic_GlobalOptions.TraceProbe = true;
+				BusLogic_GlobalOptions.TraceHardwareReset = true;
+				BusLogic_GlobalOptions.TraceConfiguration = true;
+				BusLogic_GlobalOptions.TraceErrors = true;
+			}
+			if (*OptionsString == ',')
+				OptionsString++;
+			else if (*OptionsString != ';' && *OptionsString != '\0') {
+				BusLogic_Error("BusLogic: Unexpected Driver Option '%s' " "ignored\n", NULL, OptionsString);
+				*OptionsString = '\0';
+			}
+		}
+		if (!(BusLogic_DriverOptionsCount == 0 || BusLogic_ProbeInfoCount == 0 || BusLogic_DriverOptionsCount == BusLogic_ProbeInfoCount)) {
+			BusLogic_Error("BusLogic: Invalid Driver Options " "(all or no I/O Addresses must be specified)\n", NULL);
+			return 0;
+		}
+		/*
+		   Tagged Queuing is disabled when the Queue Depth is 1 since queuing
+		   multiple commands is not possible.
+		 */
+		for (TargetID = 0; TargetID < BusLogic_MaxTargetDevices; TargetID++)
+			if (DriverOptions->QueueDepth[TargetID] == 1) {
+				unsigned short TargetBit = 1 << TargetID;
+				DriverOptions->TaggedQueuingPermitted &= ~TargetBit;
+				DriverOptions->TaggedQueuingPermittedMask |= TargetBit;
+			}
+		if (*OptionsString == ';')
+			OptionsString++;
+		if (*OptionsString == '\0')
+			return 0;
+	}
+	return 1;
+}
+
+/*
+  Get it all started
+*/
+
+static struct scsi_host_template Bus_Logic_template = {
+	.module = THIS_MODULE,
+	.proc_name = "BusLogic",
+	.proc_info = BusLogic_ProcDirectoryInfo,
+	.name = "BusLogic",
+	.info = BusLogic_DriverInfo,
+	.queuecommand = BusLogic_QueueCommand,
+	.slave_configure = BusLogic_SlaveConfigure,
+	.bios_param = BusLogic_BIOSDiskParameters,
+	.eh_host_reset_handler = BusLogic_host_reset,
+#if 0
+	.eh_abort_handler = BusLogic_AbortCommand,
+#endif
+	.unchecked_isa_dma = 1,
+	.max_sectors = 128,
+	.use_clustering = ENABLE_CLUSTERING,
+};
+
+/*
+  BusLogic_Setup handles processing of Kernel Command Line Arguments.
+*/
+
+static int __init BusLogic_Setup(char *str)
+{
+	int ints[3];
+
+	(void) get_options(str, ARRAY_SIZE(ints), ints);
+
+	if (ints[0] != 0) {
+		BusLogic_Error("BusLogic: Obsolete Command Line Entry " "Format Ignored\n", NULL);
+		return 0;
+	}
+	if (str == NULL || *str == '\0')
+		return 0;
+	return BusLogic_ParseDriverOptions(str);
+}
+
+/*
+ * Exit function.  Deletes all hosts associated with this driver.
+ */
+
+static void __exit BusLogic_exit(void)
+{
+	struct BusLogic_HostAdapter *ha, *next;
+
+	list_for_each_entry_safe(ha, next, &BusLogic_host_list, host_list)
+		BusLogic_ReleaseHostAdapter(ha);
+}
+
+__setup("BusLogic=", BusLogic_Setup);
+
+module_init(BusLogic_init);
+module_exit(BusLogic_exit);