summaryrefslogtreecommitdiffstats
path: root/drivers/scsi/FlashPoint.c
diff options
context:
space:
mode:
authorAlexey Dobriyan <adobriyan@gmail.com>2006-03-08 00:14:22 -0800
committerJames Bottomley <jejb@mulgrave.il.steeleye.com>2006-03-12 09:12:11 -0600
commit85ae97d816da3f8af9dcfbc4197a2950b55c3b0d (patch)
tree033848609c70a5cb5311f7f3d269f582c74ec5b5 /drivers/scsi/FlashPoint.c
parentf018fa552c52642a6b9db2bda90477762e42163f (diff)
[SCSI] drivers/scsi/FlashPoint.c: remove unused things
* Remove unused #define's * Remove unused typedefs. * Remove prototypes for non-existing functions. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
Diffstat (limited to 'drivers/scsi/FlashPoint.c')
-rw-r--r--drivers/scsi/FlashPoint.c345
1 files changed, 1 insertions, 344 deletions
diff --git a/drivers/scsi/FlashPoint.c b/drivers/scsi/FlashPoint.c
index 8d64f0bed62..38e6b71484b 100644
--- a/drivers/scsi/FlashPoint.c
+++ b/drivers/scsi/FlashPoint.c
@@ -47,15 +47,10 @@
#define SccbMgr_isr FlashPoint_HandleInterrupt
-#define MAX_CDBLEN 12
-#define SCAM_LEV_2 1
#define CRCMASK 0xA001
-#define BL_VENDOR_ID 0x104B
-#define FP_DEVICE_ID 0x8130
-#define MM_DEVICE_ID 0x1040
#define FAILURE 0xFFFFFFFFL
@@ -65,15 +60,9 @@ typedef unsigned char UCHAR;
typedef unsigned short USHORT;
typedef unsigned int UINT;
typedef unsigned long ULONG;
-typedef unsigned char * PUCHAR;
-typedef unsigned short* PUSHORT;
-typedef unsigned long * PULONG;
-typedef void * PVOID;
-typedef unsigned char * uchar_ptr;
typedef unsigned short * ushort_ptr;
-typedef unsigned long * ulong_ptr;
#define s08bits char
@@ -84,9 +73,6 @@ typedef unsigned long * ulong_ptr;
#define u16bits unsigned s16bits
#define u32bits unsigned s32bits
-typedef u08bits * pu08bits;
-typedef u16bits * pu16bits;
-typedef u32bits * pu32bits;
#define BIT(x) ((UCHAR)(1<<(x))) /* single-bit mask in bit position x */
@@ -144,10 +130,6 @@ typedef SCCBMGR_INFO * PSCCBMGR_INFO;
#define HARPOON_FAMILY 0x02
-#define ISA_BUS_CARD 0x01
-#define EISA_BUS_CARD 0x02
-#define PCI_BUS_CARD 0x03
-#define VESA_BUS_CARD 0x04
/* SCCB struct used for both SCCB and UCB manager compiles!
* The UCB Manager treats the SCCB as it's 'native hardware structure'
@@ -200,14 +182,11 @@ typedef struct _SCCB {
ULONG Sccb_SGoffset;
} SCCB;
-#define SCCB_SIZE sizeof(SCCB)
#pragma pack()
-#define SCSI_INITIATOR_COMMAND 0x00
-#define TARGET_MODE_COMMAND 0x01
#define SCATTER_GATHER_COMMAND 0x02
#define RESIDUAL_COMMAND 0x03
#define RESIDUAL_SG_COMMAND 0x04
@@ -216,12 +195,10 @@ typedef struct _SCCB {
#define F_USE_CMD_Q 0x20 /*Inidcates TAGGED command. */
#define TAG_TYPE_MASK 0xC0 /*Type of tag msg to send. */
-#define TAG_Q_MASK 0xE0
#define SCCB_DATA_XFER_OUT 0x10 /* Write */
#define SCCB_DATA_XFER_IN 0x08 /* Read */
-#define FOURTEEN_BYTES 0x00 /* Request Sense Buffer size */
#define NO_AUTO_REQUEST_SENSE 0x01 /* No Request Sense Buffer */
@@ -235,9 +212,7 @@ typedef struct _SCCB {
#define DATA_OUT_ST 7
#define DATA_IN_ST 8
#define DISCONNECT_ST 9
-#define STATUS_ST 10
#define ABORT_ST 11
-#define MESSAGE_ST 12
#define F_HOST_XFER_DIR 0x01
@@ -249,7 +224,6 @@ typedef struct _SCCB {
#define F_STATUSLOADED 0x01
-#define F_MSGLOADED 0x02
#define F_DEV_SELECTED 0x04
@@ -257,56 +231,39 @@ typedef struct _SCCB {
#define SCCB_DATA_UNDER_RUN 0x0C
#define SCCB_SELECTION_TIMEOUT 0x11 /* Set SCSI selection timed out */
#define SCCB_DATA_OVER_RUN 0x12
-#define SCCB_UNEXPECTED_BUS_FREE 0x13 /* Target dropped SCSI BSY */
#define SCCB_PHASE_SEQUENCE_FAIL 0x14 /* Target bus phase sequence failure */
-#define SCCB_INVALID_OP_CODE 0x16 /* SCCB invalid operation code */
-#define SCCB_INVALID_SCCB 0x1A /* Invalid SCCB - bad parameter */
#define SCCB_GROSS_FW_ERR 0x27 /* Major problem! */
#define SCCB_BM_ERR 0x30 /* BusMaster error. */
#define SCCB_PARITY_ERR 0x34 /* SCSI parity error */
-#define SCCB_INVALID_DIRECTION 0x18 /* Invalid target direction */
-#define SCCB_DUPLICATE_SCCB 0x19 /* Duplicate SCCB */
-#define SCCB_SCSI_RST 0x35 /* SCSI RESET detected. */
#define SCCB_IN_PROCESS 0x00
#define SCCB_SUCCESS 0x01
#define SCCB_ABORT 0x02
-#define SCCB_NOT_FOUND 0x03
#define SCCB_ERROR 0x04
-#define SCCB_INVALID 0x05
-#define SCCB_SIZE sizeof(SCCB)
#define ORION_FW_REV 3110
-#define HARP_REVD 1
#define QUEUE_DEPTH 254+1 /*1 for Normal disconnect 32 for Q'ing. */
#define MAX_MB_CARDS 4 /* Max. no of cards suppoerted on Mother Board */
-#define WIDE_SCSI 1
#define MAX_SCSI_TAR 16
#define MAX_LUN 32
#define LUN_MASK 0x1f
-#if defined(HARP_REVA)
-#define SG_BUF_CNT 15 /*Number of prefetched elements. */
-#else
#define SG_BUF_CNT 16 /*Number of prefetched elements. */
-#endif
#define SG_ELEMENT_SIZE 8 /*Eight byte per element. */
-#define SG_LOCAL_MASK 0x00000000L
-#define SG_ELEMENT_MASK 0xFFFFFFFFL
#define RD_HARPOON(ioport) OS_InPortByte((u32bits)ioport)
@@ -318,31 +275,25 @@ typedef struct _SCCB {
#define TAR_SYNC_MASK (BIT(7)+BIT(6))
-#define SYNC_UNKNOWN 0x00
#define SYNC_TRYING BIT(6)
#define SYNC_SUPPORTED (BIT(7)+BIT(6))
#define TAR_WIDE_MASK (BIT(5)+BIT(4))
-#define WIDE_DISABLED 0x00
#define WIDE_ENABLED BIT(4)
#define WIDE_NEGOCIATED BIT(5)
#define TAR_TAG_Q_MASK (BIT(3)+BIT(2))
-#define TAG_Q_UNKNOWN 0x00
#define TAG_Q_TRYING BIT(2)
#define TAG_Q_REJECT BIT(3)
-#define TAG_Q_SUPPORTED (BIT(3)+BIT(2))
#define TAR_ALLOW_DISC BIT(0)
#define EE_SYNC_MASK (BIT(0)+BIT(1))
-#define EE_SYNC_ASYNC 0x00
#define EE_SYNC_5MB BIT(0)
#define EE_SYNC_10MB BIT(1)
#define EE_SYNC_20MB (BIT(0)+BIT(1))
-#define EE_ALLOW_DISC BIT(6)
#define EE_WIDE_SCSI BIT(7)
@@ -418,7 +369,6 @@ typedef struct SCCBcard *PSCCBcard;
#define ID_STRING_LENGTH 32
#define TYPE_CODE0 0x63 /*Level2 Mstr (bits 7-6), */
-#define TYPE_CODE1 00 /*No ID yet */
#define SLV_TYPE_CODE0 0xA3 /*Priority Bit set (bits 7-6), */
@@ -430,16 +380,9 @@ typedef struct SCCBcard *PSCCBcard;
#define ID_0_7 0x18
#define ID_8_F 0x11
-#define ID_10_17 0x12
-#define ID_18_1F 0x0B
#define MISC_CODE 0x14
#define CLR_P_FLAG 0x18
-#define LOCATE_ON 0x12
-#define LOCATE_OFF 0x0B
-#define LVL_1_MST 0x00
-#define LVL_2_MST 0x40
-#define DOM_LVL_2 0xC0
#define INIT_SELTD 0x01
@@ -455,64 +398,24 @@ typedef struct SCCBscam_info {
UCHAR id_string[ID_STRING_LENGTH];
enum scam_id_st state;
-} SCCBSCAM_INFO, *PSCCBSCAM_INFO;
+} SCCBSCAM_INFO;
-#define SCSI_TEST_UNIT_READY 0x00
-#define SCSI_REZERO_UNIT 0x01
#define SCSI_REQUEST_SENSE 0x03
-#define SCSI_FORMAT_UNIT 0x04
-#define SCSI_REASSIGN 0x07
#define SCSI_READ 0x08
#define SCSI_WRITE 0x0A
-#define SCSI_SEEK 0x0B
-#define SCSI_INQUIRY 0x12
-#define SCSI_MODE_SELECT 0x15
-#define SCSI_RESERVE_UNIT 0x16
-#define SCSI_RELEASE_UNIT 0x17
-#define SCSI_MODE_SENSE 0x1A
#define SCSI_START_STOP_UNIT 0x1B
-#define SCSI_SEND_DIAGNOSTIC 0x1D
-#define SCSI_READ_CAPACITY 0x25
#define SCSI_READ_EXTENDED 0x28
#define SCSI_WRITE_EXTENDED 0x2A
-#define SCSI_SEEK_EXTENDED 0x2B
#define SCSI_WRITE_AND_VERIFY 0x2E
-#define SCSI_VERIFY 0x2F
-#define SCSI_READ_DEFECT_DATA 0x37
-#define SCSI_WRITE_BUFFER 0x3B
-#define SCSI_READ_BUFFER 0x3C
-#define SCSI_RECV_DIAGNOSTIC 0x1C
-#define SCSI_READ_LONG 0x3E
-#define SCSI_WRITE_LONG 0x3F
-#define SCSI_LAST_SCSI_CMND SCSI_WRITE_LONG
-#define SCSI_INVALID_CMND 0xFF
#define SSGOOD 0x00
#define SSCHECK 0x02
-#define SSCOND_MET 0x04
-#define SSBUSY 0x08
-#define SSRESERVATION_CONFLICT 0x18
-#define SSCMD_TERM 0x22
#define SSQ_FULL 0x28
-#define SKNO_SEN 0x00
-#define SKRECOV_ERR 0x01
-#define SKNOT_RDY 0x02
-#define SKMED_ERR 0x03
-#define SKHW_ERR 0x04
-#define SKILL_REQ 0x05
-#define SKUNIT_ATTN 0x06
-#define SKDATA_PROTECT 0x07
-#define SKBLNK_CHK 0x08
-#define SKCPY_ABORT 0x0A
-#define SKABORT_CMD 0x0B
-#define SKEQUAL 0x0C
-#define SKVOL_OVF 0x0D
-#define SKMIS_CMP 0x0E
#define SMCMD_COMP 0x00
@@ -520,7 +423,6 @@ typedef struct SCCBscam_info {
#define SMSAVE_DATA_PTR 0x02
#define SMREST_DATA_PTR 0x03
#define SMDISC 0x04
-#define SMINIT_DETEC_ERR 0x05
#define SMABORT 0x06
#define SMREJECT 0x07
#define SMNO_OP 0x08
@@ -535,35 +437,22 @@ typedef struct SCCBscam_info {
#define SMSYNC 0x01
-#define SM10MBS 0x19 /* 100ns */
-#define SM5MBS 0x32 /* 200ns */
-#define SMOFFSET 0x0F /* Maxoffset value */
#define SMWDTR 0x03
#define SM8BIT 0x00
#define SM16BIT 0x01
-#define SM32BIT 0x02
#define SMIGNORWR 0x23 /* Ignore Wide Residue */
-#define ARBITRATION_DELAY 0x01 /* 2.4us using a 40Mhz clock */
-#define BUS_SETTLE_DELAY 0x01 /* 400ns */
-#define BUS_CLEAR_DELAY 0x01 /* 800ns */
-#define SPHASE_TO 0x0A /* 10 second timeout waiting for */
-#define SCMD_TO 0x0F /* Overall command timeout */
#define SIX_BYTE_CMD 0x06
-#define TEN_BYTE_CMD 0x0A
#define TWELVE_BYTE_CMD 0x0C
#define ASYNC 0x00
-#define PERI25NS 0x06 /* 25/4ns to next clock for xbow. */
-#define SYNC10MBS 0x19
-#define SYNC5MBS 0x32
#define MAX_OFFSET 0x0F /* Maxbyteoffset for Sync Xfers */
@@ -572,19 +461,11 @@ typedef struct SCCBscam_info {
#define EEPROM_CHECK_SUM 0
#define FW_SIGNATURE 2
#define MODEL_NUMB_0 4
-#define MODEL_NUMB_1 5
#define MODEL_NUMB_2 6
-#define MODEL_NUMB_3 7
#define MODEL_NUMB_4 8
-#define MODEL_NUMB_5 9
-#define IO_BASE_ADDR 10
-#define IRQ_NUMBER 12
-#define PCI_INT_PIN 13
-#define BUS_DELAY 14 /*On time in byte 14 off delay in 15 */
#define SYSTEM_CONFIG 16
#define SCSI_CONFIG 17
#define BIOS_CONFIG 18
-#define SPIN_UP_DELAY 19
#define SCAM_CONFIG 20
#define ADAPTER_SCSI_ID 24
@@ -609,7 +490,6 @@ typedef struct SCCBscam_info {
- #define DOM_MASTER (BIT(0) + BIT(1))
#define SCAM_ENABLED BIT(2)
#define SCAM_LEVEL2 BIT(3)
@@ -644,16 +524,9 @@ typedef struct SCCBscam_info {
/* Sub Vendor ID and Sub Device ID only available in
Harpoon Version 2 and higher */
- #define hp_sub_vendor_id_0 0x04 /* LSB */
- #define hp_sub_vendor_id_1 0x05 /* MSB */
#define hp_sub_device_id_0 0x06 /* LSB */
- #define hp_sub_device_id_1 0x07 /* MSB */
- #define hp_dual_addr_lo 0x08
- #define hp_dual_addr_lmi 0x09
- #define hp_dual_addr_hmi 0x0A
- #define hp_dual_addr_hi 0x0B
#define hp_semaphore 0x0C
#define SCCB_MGR_ACTIVE BIT(0)
@@ -661,9 +534,7 @@ typedef struct SCCBscam_info {
#define SCCB_MGR_PRESENT BIT(3)
#define BIOS_IN_USE BIT(4)
- #define hp_user_defined_D 0x0D
- #define hp_reserved_E 0x0E
#define hp_sys_ctrl 0x0F
@@ -671,95 +542,49 @@ typedef struct SCCBscam_info {
#define DRVR_RST BIT(1) /*Firmware Reset to 80C15 chip */
#define HALT_MACH BIT(3) /*Halt State Machine */
#define HARD_ABORT BIT(4) /*Hard Abort */
- #define DIAG_MODE BIT(5) /*Diagnostic Mode */
- #define BM_ABORT_TMOUT 0x50 /*Halt State machine time out */
- #define hp_sys_cfg 0x10
- #define DONT_RST_FIFO BIT(7) /*Don't reset FIFO */
- #define hp_host_ctrl0 0x11
- #define DUAL_ADDR_MODE BIT(0) /*Enable 64-bit addresses */
- #define IO_MEM_SPACE BIT(1) /*I/O Memory Space */
- #define RESOURCE_LOCK BIT(2) /*Enable Resource Lock */
- #define IGNOR_ACCESS_ERR BIT(3) /*Ignore Access Error */
- #define HOST_INT_EDGE BIT(4) /*Host interrupt level/edge mode sel */
- #define SIX_CLOCKS BIT(5) /*6 Clocks between Strobe */
- #define DMA_EVEN_PARITY BIT(6) /*Enable DMA Enen Parity */
-/*
- #define BURST_MODE BIT(0)
-*/
- #define hp_reserved_12 0x12
#define hp_host_blk_cnt 0x13
- #define XFER_BLK1 0x00 /* 0 0 0 1 byte per block*/
- #define XFER_BLK2 0x01 /* 0 0 1 2 byte per block*/
- #define XFER_BLK4 0x02 /* 0 1 0 4 byte per block*/
- #define XFER_BLK8 0x03 /* 0 1 1 8 byte per block*/
- #define XFER_BLK16 0x04 /* 1 0 0 16 byte per block*/
- #define XFER_BLK32 0x05 /* 1 0 1 32 byte per block*/
#define XFER_BLK64 0x06 /* 1 1 0 64 byte per block*/
#define BM_THRESHOLD 0x40 /* PCI mode can only xfer 16 bytes*/
- #define hp_reserved_14 0x14
- #define hp_reserved_15 0x15
- #define hp_reserved_16 0x16
#define hp_int_mask 0x17
#define INT_CMD_COMPL BIT(0) /* DMA command complete */
#define INT_EXT_STATUS BIT(1) /* Extended Status Set */
- #define INT_SCSI BIT(2) /* Scsi block interrupt */
- #define INT_FIFO_RDY BIT(4) /* FIFO data ready */
#define hp_xfer_cnt_lo 0x18
- #define hp_xfer_cnt_mi 0x19
#define hp_xfer_cnt_hi 0x1A
#define hp_xfer_cmd 0x1B
#define XFER_HOST_DMA 0x00 /* 0 0 0 Transfer Host -> DMA */
#define XFER_DMA_HOST 0x01 /* 0 0 1 Transfer DMA -> Host */
- #define XFER_HOST_MPU 0x02 /* 0 1 0 Transfer Host -> MPU */
- #define XFER_MPU_HOST 0x03 /* 0 1 1 Transfer MPU -> Host */
- #define XFER_DMA_MPU 0x04 /* 1 0 0 Transfer DMA -> MPU */
- #define XFER_MPU_DMA 0x05 /* 1 0 1 Transfer MPU -> DMA */
- #define SET_SEMAPHORE 0x06 /* 1 1 0 Set Semaphore */
- #define XFER_NOP 0x07 /* 1 1 1 Transfer NOP */
- #define XFER_MB_MPU 0x06 /* 1 1 0 Transfer MB -> MPU */
- #define XFER_MB_DMA 0x07 /* 1 1 1 Transfer MB -> DMA */
#define XFER_HOST_AUTO 0x00 /* 0 0 Auto Transfer Size */
- #define XFER_HOST_8BIT 0x08 /* 0 1 8 BIT Transfer Size */
- #define XFER_HOST_16BIT 0x10 /* 1 0 16 BIT Transfer Size */
- #define XFER_HOST_32BIT 0x18 /* 1 1 32 BIT Transfer Size */
#define XFER_DMA_8BIT 0x20 /* 0 1 8 BIT Transfer Size */
- #define XFER_DMA_16BIT 0x40 /* 1 0 16 BIT Transfer Size */
#define DISABLE_INT BIT(7) /*Do not interrupt at end of cmd. */
#define HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_8BIT))
#define HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_8BIT))
- #define WIDE_HOST_WRT_CMD ((DISABLE_INT + XFER_HOST_DMA + XFER_HOST_AUTO + XFER_DMA_16BIT))
- #define WIDE_HOST_RD_CMD ((DISABLE_INT + XFER_DMA_HOST + XFER_HOST_AUTO + XFER_DMA_16BIT))
#define hp_host_addr_lo 0x1C
- #define hp_host_addr_lmi 0x1D
#define hp_host_addr_hmi 0x1E
- #define hp_host_addr_hi 0x1F
- #define hp_pio_data 0x20
- #define hp_reserved_21 0x21
#define hp_ee_ctrl 0x22
#define EXT_ARB_ACK BIT(7)
@@ -777,17 +602,8 @@ typedef struct SCCBscam_info {
#define EWDS 0x04
#define EWDS_ADDR 0x0000
- #define hp_brdctl 0x23
- #define DAT_7 BIT(7)
- #define DAT_6 BIT(6)
- #define DAT_5 BIT(5)
- #define BRD_STB BIT(4)
- #define BRD_CS BIT(3)
- #define BRD_WR BIT(2)
- #define hp_reserved_24 0x24
- #define hp_reserved_25 0x25
@@ -796,70 +612,36 @@ typedef struct SCCBscam_info {
#define SCSI_TERM_ENA_L BIT(0) /*Enable/Disable external terminators */
#define FLUSH_XFER_CNTR BIT(1) /*Flush transfer counter */
- #define BM_XFER_MIN_8 BIT(2) /*Enable bus master transfer of 9 */
- #define BIOS_ENA BIT(3) /*Enable BIOS/FLASH Enable */
#define FORCE1_XFER BIT(5) /*Always xfer one byte in byte mode */
#define FAST_SINGLE BIT(6) /*?? */
#define BMCTRL_DEFAULT (FORCE1_XFER|FAST_SINGLE|SCSI_TERM_ENA_L)
- #define hp_reserved_27 0x27
#define hp_sg_addr 0x28
#define hp_page_ctrl 0x29
#define SCATTER_EN BIT(0)
#define SGRAM_ARAM BIT(1)
- #define BIOS_SHADOW BIT(2)
#define G_INT_DISABLE BIT(3) /* Enable/Disable all Interrupts */
#define NARROW_SCSI_CARD BIT(4) /* NARROW/WIDE SCSI config pin */
- #define hp_reserved_2A 0x2A
- #define hp_pci_cmd_cfg 0x2B
- #define IO_SPACE_ENA BIT(0) /*enable I/O space */
- #define MEM_SPACE_ENA BIT(1) /*enable memory space */
- #define BUS_MSTR_ENA BIT(2) /*enable bus master operation */
- #define MEM_WI_ENA BIT(4) /*enable Write and Invalidate */
- #define PAR_ERR_RESP BIT(6) /*enable parity error responce. */
- #define hp_reserved_2C 0x2C
#define hp_pci_stat_cfg 0x2D
- #define DATA_PARITY_ERR BIT(0)
- #define REC_TARGET_ABORT BIT(4) /*received Target abort */
#define REC_MASTER_ABORT BIT(5) /*received Master abort */
- #define SIG_SYSTEM_ERR BIT(6)
- #define DETECTED_PAR_ERR BIT(7)
- #define hp_reserved_2E 0x2E
- #define hp_sys_status 0x2F
- #define SLV_DATA_RDY BIT(0) /*Slave data ready */
- #define XFER_CNT_ZERO BIT(1) /*Transfer counter = 0 */
- #define BM_FIFO_EMPTY BIT(2) /*FIFO empty */
- #define BM_FIFO_FULL BIT(3) /*FIFO full */
- #define HOST_OP_DONE BIT(4) /*host operation done */
- #define DMA_OP_DONE BIT(5) /*DMA operation done */
- #define SLV_OP_DONE BIT(6) /*Slave operation done */
- #define PWR_ON_FLAG BIT(7) /*Power on flag */
- #define hp_reserved_30 0x30
- #define hp_host_status0 0x31
- #define HOST_TERM BIT(5) /*Host Terminal Count */
- #define HOST_TRSHLD BIT(6) /*Host Threshold */
- #define CONNECTED_2_HOST BIT(7) /*Connected to Host */
- #define hp_reserved_32 0x32
#define hp_rev_num 0x33
- #define REV_A_CONST 0x0E
- #define REV_B_CONST 0x0E
#define hp_stack_data 0x34
#define hp_stack_addr 0x35
@@ -869,8 +651,6 @@ typedef struct SCCBscam_info {
#define BM_FORCE_OFF BIT(0) /*Bus Master is forced to get off */
#define PCI_TGT_ABORT BIT(0) /*PCI bus master transaction aborted */
#define PCI_DEV_TMOUT BIT(1) /*PCI Device Time out */
- #define FIFO_TC_NOT_ZERO BIT(2) /*FIFO or transfer counter not zero */
- #define CHIP_RST_OCCUR BIT(3) /*Chip reset occurs */
#define CMD_ABORTED BIT(4) /*Command aborted */
#define BM_PARITY_ERR BIT(5) /*parity error on data received */
#define PIO_OVERRUN BIT(6) /*Slave data overrun */
@@ -880,24 +660,13 @@ typedef struct SCCBscam_info {
#define hp_int_status 0x37
- #define BM_CMD_CMPL BIT(0) /*Bus Master command complete */
#define EXT_STATUS_ON BIT(1) /*Extended status is valid */
#define SCSI_INTERRUPT BIT(2) /*Global indication of a SCSI int. */
- #define BM_FIFO_RDY BIT(4)
#define INT_ASSERTED BIT(5) /* */
- #define SRAM_BUSY BIT(6) /*Scatter/Gather RAM busy */
- #define CMD_REG_BUSY BIT(7)
#define hp_fifo_cnt 0x38
- #define hp_curr_host_cnt 0x39
- #define hp_reserved_3A 0x3A
- #define hp_fifo_in_addr 0x3B
- #define hp_fifo_out_addr 0x3C
- #define hp_reserved_3D 0x3D
- #define hp_reserved_3E 0x3E
- #define hp_reserved_3F 0x3F
@@ -937,9 +706,7 @@ typedef struct SCCBscam_info {
#define SCSI_IOBIT BIT(0)
#define S_SCSI_PHZ (BIT(2)+BIT(1)+BIT(0))
- #define S_CMD_PH (BIT(2) )
#define S_MSGO_PH (BIT(2)+BIT(1) )
- #define S_STAT_PH (BIT(2) +BIT(0))
#define S_MSGI_PH (BIT(2)+BIT(1)+BIT(0))
#define S_DATAI_PH ( BIT(0))
#define S_DATAO_PH 0x00
@@ -947,7 +714,6 @@ typedef struct SCCBscam_info {
#define hp_scsictrl_0 0x45
- #define NO_ARB BIT(7)
#define SEL_TAR BIT(6)
#define ENA_ATN BIT(4)
#define ENA_RESEL BIT(2)
@@ -969,44 +735,33 @@ typedef struct SCCBscam_info {
#define hp_scsireset 0x47
- #define SCSI_TAR BIT(7)
#define SCSI_INI BIT(6)
#define SCAM_EN BIT(5)
- #define ACK_HOLD BIT(4)
#define DMA_RESET BIT(3)
#define HPSCSI_RESET BIT(2)
#define PROG_RESET BIT(1)
#define FIFO_CLR BIT(0)
#define hp_xfercnt_0 0x48
- #define hp_xfercnt_1 0x49
#define hp_xfercnt_2 0x4A
- #define hp_xfercnt_3 0x4B
#define hp_fifodata_0 0x4C
- #define hp_fifodata_1 0x4D
#define hp_addstat 0x4E
#define SCAM_TIMER BIT(7)
- #define AUTO_RUNNING BIT(6)
- #define FAST_SYNC BIT(5)
#define SCSI_MODE8 BIT(3)
#define SCSI_PAR_ERR BIT(0)
#define hp_prgmcnt_0 0x4F
- #define AUTO_PC_MASK 0x3F
#define hp_selfid_0 0x50
#define hp_selfid_1 0x51
#define hp_arb_id 0x52
- #define ARB_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_select_id 0x53
- #define RESEL_ID (BIT(7) + BIT(6) + BIT(5) + BIT(4))
- #define SELECT_ID (BIT(3) + BIT(2) + BIT(1) + BIT(0))
#define hp_synctarg_base 0x54
#define hp_synctarg_12 0x54
@@ -1029,63 +784,38 @@ typedef struct SCCBscam_info {
#define hp_synctarg_2 0x62
#define hp_synctarg_3 0x63
- #define RATE_20MB 0x00
- #define RATE_10MB ( BIT(5))
- #define RATE_6_6MB ( BIT(6) )
- #define RATE_5MB ( BIT(6)+BIT(5))
- #define RATE_4MB (BIT(7) )
- #define RATE_3_33MB (BIT(7) +BIT(5))
- #define RATE_2_85MB (BIT(7)+BIT(6) )
- #define RATE_2_5MB (BIT(7)+BIT(5)+BIT(6))
- #define NEXT_CLK BIT(5)
- #define SLOWEST_SYNC (BIT(7)+BIT(6)+BIT(5))
#define NARROW_SCSI BIT(4)
- #define SYNC_OFFSET (BIT(3) + BIT(2) + BIT(1) + BIT(0))
- #define DEFAULT_ASYNC 0x00
#define DEFAULT_OFFSET 0x0F
#define hp_autostart_0 0x64
#define hp_autostart_1 0x65
- #define hp_autostart_2 0x66
#define hp_autostart_3 0x67
- #define DISABLE 0x00
#define AUTO_IMMED BIT(5)
#define SELECT BIT(6)
- #define RESELECT (BIT(6)+BIT(5))
- #define BUSFREE BIT(7)
- #define XFER_0 (BIT(7)+BIT(5))
#define END_DATA (BIT(7)+BIT(6))
- #define MSG_PHZ (BIT(7)+BIT(6)+BIT(5))
#define hp_gp_reg_0 0x68
#define hp_gp_reg_1 0x69
- #define hp_gp_reg_2 0x6A
#define hp_gp_reg_3 0x6B
#define hp_seltimeout 0x6C
- #define TO_2ms 0x54 /* 2.0503ms */
#define TO_4ms 0x67 /* 3.9959ms */
#define TO_5ms 0x03 /* 4.9152ms */
#define TO_10ms 0x07 /* 11.xxxms */
#define TO_250ms 0x99 /* 250.68ms */
#define TO_290ms 0xB1 /* 289.99ms */
- #define TO_350ms 0xD6 /* 350.62ms */
- #define TO_417ms 0xFF /* 417.79ms */
#define hp_clkctrl_0 0x6D
#define PWR_DWN BIT(6)
#define ACTdeassert BIT(4)
- #define ATNonErr BIT(3)
- #define CLK_30MHZ BIT(1)
#define CLK_40MHZ (BIT(1) + BIT(0))
- #define CLK_50MHZ BIT(2)
#define CLKCTRL_DEFAULT (ACTdeassert | CLK_40MHZ)
@@ -1095,38 +825,21 @@ typedef struct SCCBscam_info {
#define hp_offsetctr 0x70
#define hp_xferstat 0x71
- #define FIFO_FULL BIT(7)
#define FIFO_EMPTY BIT(6)
- #define FIFO_MASK 0x3F /* Mask for the FIFO count value. */
- #define FIFO_LEN 0x20
#define hp_portctrl_1 0x72
- #define EVEN_HOST_P BIT(5)
- #define INVT_SCSI BIT(4)
#define CHK_SCSI_P BIT(3)
#define HOST_MODE8 BIT(0)
- #define HOST_MODE16 0x00
#define hp_xfer_pad 0x73
#define ID_UNLOCK BIT(3)
- #define XFER_PAD BIT(2)
#define hp_scsidata_0 0x74
#define hp_scsidata_1 0x75
- #define hp_timer_0 0x76
- #define hp_timer_1 0x77
- #define hp_reserved_78 0x78
- #define hp_reserved_79 0x79
- #define hp_reserved_7A 0x7A
- #define hp_reserved_7B 0x7B
- #define hp_reserved_7C 0x7C
- #define hp_reserved_7D 0x7D
- #define hp_reserved_7E 0x7E
- #define hp_reserved_7F 0x7F
#define hp_aramBase 0x80
#define BIOS_DATA_OFFSET 0x60
@@ -1135,22 +848,15 @@ typedef struct SCCBscam_info {
- #define AUTO_LEN 0x80
- #define AR0 0x00
- #define AR1 BITW(8)
- #define AR2 BITW(9)
#define AR3 (BITW(9) + BITW(8))
#define SDATA BITW(10)
- #define NOP_OP 0x00 /* Nop command */
#define CRD_OP BITW(11) /* Cmp Reg. w/ Data */
#define CRR_OP BITW(12) /* Cmp Reg. w. Reg. */
- #define CBE_OP (BITW(14)+BITW(12)+BITW(11)) /* Cmp SCSI cmd class & Branch EQ */
- #define CBN_OP (BITW(14)+BITW(13)) /* Cmp SCSI cmd class & Branch NOT EQ */
#define CPE_OP (BITW(14)+BITW(11)) /* Cmp SCSI phs & Branch EQ */
@@ -1163,7 +869,6 @@ typedef struct SCCBscam_info {
#define ASTATUS (BITW(10)+BITW(8))
#define AMSG_OUT (BITW(10)+BITW(9))
#define AMSG_IN (BITW(10)+BITW(9)+BITW(8))
- #define AILLEGAL (BITW(9)+BITW(8))
#define BRH_OP BITW(13) /* Branch */
@@ -1176,17 +881,11 @@ typedef struct SCCBscam_info {
#define TCB_OP (BITW(13)+BITW(11)) /* Test condition & branch */
- #define ATN_SET BITW(8)
- #define ATN_RESET BITW(9)
- #define XFER_CNT (BITW(9)+BITW(8))
#define FIFO_0 BITW(10)
- #define FIFO_NOT0 (BITW(10)+BITW(8))
- #define T_USE_SYNC0 (BITW(10)+BITW(9))
#define MPM_OP BITW(15) /* Match phase and move data */
- #define MDR_OP (BITW(12)+BITW(11)) /* Move data to Reg. */
#define MRR_OP BITW(14) /* Move DReg. to Reg. */
@@ -1196,34 +895,14 @@ typedef struct SCCBscam_info {
#define D_AR0 0x00
#define D_AR1 BIT(0)
- #define D_AR2 BIT(1)
- #define D_AR3 (BIT(1) + BIT(0))
- #define D_SDATA BIT(2)
#define D_BUCKET (BIT(2) + BIT(1) + BIT(0))
- #define ADR_OP (BITW(13)+BITW(12)) /* Logical AND Reg. w. Data */
- #define ADS_OP (BITW(14)+BITW(13)+BITW(12))
- #define ODR_OP (BITW(13)+BITW(12)+BITW(11))
- #define ODS_OP (BITW(14)+BITW(13)+BITW(12)+BITW(11))
- #define STR_OP (BITW(15)+BITW(14)) /* Store to A_Reg. */
- #define AINT_ENA1 0x00
- #define AINT_STAT1 BITW(8)
- #define ASCSI_SIG BITW(9)
- #define ASCSI_CNTL (BITW(9)+BITW(8))
- #define APORT_CNTL BITW(10)
- #define ARST_CNTL (BITW(10)+BITW(8))
- #define AXFERCNT0 (BITW(10)+BITW(9))
- #define AXFERCNT1 (BITW(10)+BITW(9)+BITW(8))
- #define AXFERCNT2 BITW(11)
- #define AFIFO_DATA (BITW(11)+BITW(8))
- #define ASCSISELID (BITW(11)+BITW(9))
- #define ASCSISYNC0 (BITW(11)+BITW(9)+BITW(8))
#define RAT_OP (BITW(14)+BITW(13)+BITW(11))
@@ -1233,7 +912,6 @@ typedef struct SCCBscam_info {
#define SSI_ITAR_DISC (ITAR_DISC >> 8)
#define SSI_IDO_STRT (IDO_STRT >> 8)
- #define SSI_IDI_STRT (IDO_STRT >> 8)
#define SSI_ICMD_COMP (ICMD_COMP >> 8)
#define SSI_ITICKLE (ITICKLE >> 8)
@@ -1248,13 +926,11 @@ typedef struct SCCBscam_info {
#define CMDPZ 0x04 /*Command phase */
#define DINT 0x12 /*Data Out/In interrupt */
#define DI 0x13 /*Data Out */
- #define MI 0x14 /*Message In */
#define DC 0x19 /*Disconnect Message */
#define ST 0x1D /*Status Phase */
#define UNKNWN 0x24 /*Unknown bus action */
#define CC 0x25 /*Command Completion failure */
#define TICK 0x26 /*New target reselected us. */
- #define RFAIL 0x27 /*Reselection failed */
#define SELCHK 0x28 /*Select & Check SCSI ID latch reg */
@@ -1268,25 +944,18 @@ typedef struct SCCBscam_info {
#define TAG_STRT 0x00
- #define SELECTION_START 0x00
#define DISCONNECT_START 0x10/2
#define END_DATA_START 0x14/2
- #define NONTAG_STRT 0x02/2
#define CMD_ONLY_STRT CMDPZ/2
- #define TICKLE_STRT TICK/2
#define SELCHK_STRT SELCHK/2
-#define mEEPROM_CLK_DELAY(port) (RD_HARPOON(port+hp_intstat_1))
-#define mWAIT_10MS(port) (RD_HARPOON(port+hp_intstat_1))
-#define CLR_XFER_CNT(port) (WR_HARPOON(port+hp_xfercnt_0, 0x00))
-#define SET_XFER_CNT(port, data) (WR_HARP32(port,hp_xfercnt_0,data))
#define GET_XFER_CNT(port, xfercnt) {RD_HARP32(port,hp_xfercnt_0,xfercnt); xfercnt &= 0xFFFFFF;}
/* #define GET_XFER_CNT(port, xfercnt) (xfercnt = RD_HARPOON(port+hp_xfercnt_2), \
@@ -1308,11 +977,7 @@ typedef struct SCCBscam_info {
#define ACCEPT_MSG_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
-#define ACCEPT_STAT(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
- WR_HARPOON(port+hp_scsisig, S_ILL_PH);}
-#define ACCEPT_STAT_ATN(port) {while(RD_HARPOON(port+hp_scsisig) & SCSI_REQ){}\
- WR_HARPOON(port+hp_scsisig, (S_ILL_PH|SCSI_ATN));}
#define DISABLE_AUTO(port) (WR_HARPOON(port+hp_scsireset, PROG_RESET),\
WR_HARPOON(port+hp_scsireset, 0x00))
@@ -1332,7 +997,6 @@ typedef struct SCCBscam_info {
-void scsiStartAuto(ULONG port);
static UCHAR FPT_sisyncn(ULONG port, UCHAR p_card, UCHAR syncFlag);
static void FPT_ssel(ULONG port, UCHAR p_card);
static void FPT_sres(ULONG port, UCHAR p_card, PSCCBcard pCurrCard);
@@ -1405,7 +1069,6 @@ static void FPT_DiagEEPROM(ULONG p_port);
-void busMstrAbort(ULONG port);
static void FPT_dataXferProcessor(ULONG port, PSCCBcard pCurrCard);
static void FPT_busMstrSGDataXferStart(ULONG port, PSCCB pCurrSCCB);
static void FPT_busMstrDataXferStart(ULONG port, PSCCB pCurrSCCB);
@@ -1446,12 +1109,6 @@ static void FPT_autoLoadDefaultMap(ULONG p_port);
-void OS_start_timer(unsigned long ioport, unsigned long timeout);
-void OS_stop_timer(unsigned long ioport, unsigned long timeout);
-void OS_disable_int(unsigned char intvec);
-void OS_enable_int(unsigned char intvec);
-void OS_delay(unsigned long count);
-int OS_VirtToPhys(u32bits CardHandle, u32bits *physaddr, u32bits *virtaddr);
static SCCBMGR_TAR_INFO FPT_sccbMgrTbl[MAX_CARDS][MAX_SCSI_TAR] = { { { 0 } } };
static SCCBCARD FPT_BL_Card[MAX_CARDS] = { { 0 } };
generated by cgit v1.2.3-70-g09d2 (git 2.46.0) at 2024-12-13 09:33:09 +0000