diff options
| author | Salyzyn, Mark <Mark_Salyzyn@adaptec.com> | 2008-01-08 13:26:43 -0800 |
|---|---|---|
| committer | James Bottomley <James.Bottomley@HansenPartnership.com> | 2008-01-23 11:29:21 -0600 |
| commit | b6ef70f33ca2a3084b4fea12414550724a9114dc (patch) | |
| tree | 4b8b857371adb3439c80c3612598411f46a54330 /drivers/scsi/aacraid/commsup.c | |
| parent | 6dcd4a7fe5dfaace2763187d6941e700a8bc6f27 (diff) | |
[SCSI] aacraid: OS panic after Adapter panic (hardening).
In experiments in the lab we managed to trigger an Adapter firmware
panic (BlinkLED) coincidentally while several pass-through ioctl
command from the management software were outstanding on a bug only
present on a class of RAID Adapters that require a hardware reset
rather than a commanded reset. The net result was an attempt to time
out the management software command as if it came from the SCSI layer
resulting in an OS panic.
Adapters that use commanded reset, management commands are returned
failed by the Adapter correctly. The adapter firmware panic that
resulted in this condition was also resolved, and there were no
adapters in the field with this specific firmware bug so we do not
expect any field reports. This is a rare or unlikely corner condition,
and no reports have ever been forwarded from the field.
Signed-off-by: Mark Salyzyn <aacraid@adaptec.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Diffstat (limited to 'drivers/scsi/aacraid/commsup.c')
| -rw-r--r-- | drivers/scsi/aacraid/commsup.c | 4 |
1 files changed, 3 insertions, 1 deletions
diff --git a/drivers/scsi/aacraid/commsup.c b/drivers/scsi/aacraid/commsup.c index e82d89ccaf1..3a3017d8dc6 100644 --- a/drivers/scsi/aacraid/commsup.c +++ b/drivers/scsi/aacraid/commsup.c @@ -171,6 +171,7 @@ struct fib *aac_fib_alloc(struct aac_dev *dev) * each I/O */ fibptr->hw_fib_va->header.XferState = 0; + fibptr->flags = 0; fibptr->callback = NULL; fibptr->callback_data = NULL; @@ -402,6 +403,7 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, * will have a debug mode where the adapter can notify the host * it had a problem and the host can log that fact. */ + fibptr->flags = 0; if (wait && !reply) { return -EINVAL; } else if (!wait && reply) { @@ -450,10 +452,10 @@ int aac_fib_send(u16 command, struct fib *fibptr, unsigned long size, if (!wait) { fibptr->callback = callback; fibptr->callback_data = callback_data; + fibptr->flags = FIB_CONTEXT_FLAG; } fibptr->done = 0; - fibptr->flags = 0; FIB_COUNTER_INCREMENT(aac_config.FibsSent); |